2 * Copyright (c) 2008-2009 Atheros Communications Inc.
4 * This program is free software; you can redistribute it and/or modify
5 * it under the terms of the GNU General Public License as published by
6 * the Free Software Foundation; either version 2 of the License, or
7 * (at your option) any later version.
9 * This program is distributed in the hope that it will be useful,
10 * but WITHOUT ANY WARRANTY; without even the implied warranty of
11 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
12 * GNU General Public License for more details.
14 * You should have received a copy of the GNU General Public License
15 * along with this program; if not, write to the Free Software
16 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
21 #include <linux/module.h>
22 #include <linux/kernel.h>
23 #include <linux/init.h>
24 #include <linux/slab.h>
25 #include <linux/types.h>
26 #include <linux/errno.h>
27 #include <linux/device.h>
28 #include <linux/firmware.h>
29 #include <linux/usb.h>
30 #include <net/bluetooth/bluetooth.h>
33 #define ATH3K_FIRMWARE "ath3k-1.fw"
35 #define ATH3K_DNLOAD 0x01
36 #define ATH3K_GETSTATE 0x05
37 #define ATH3K_SET_NORMAL_MODE 0x07
38 #define ATH3K_GETVERSION 0x09
39 #define USB_REG_SWITCH_VID_PID 0x0a
41 #define ATH3K_MODE_MASK 0x3F
42 #define ATH3K_NORMAL_MODE 0x0E
44 #define ATH3K_PATCH_UPDATE 0x80
45 #define ATH3K_SYSCFG_UPDATE 0x40
47 #define ATH3K_XTAL_FREQ_26M 0x00
48 #define ATH3K_XTAL_FREQ_40M 0x01
49 #define ATH3K_XTAL_FREQ_19P2 0x02
50 #define ATH3K_NAME_LEN 0xFF
52 struct ath3k_version {
53 unsigned int rom_version;
54 unsigned int build_version;
55 unsigned int ram_version;
56 unsigned char ref_clock;
57 unsigned char reserved[0x07];
60 static struct usb_device_id ath3k_table[] = {
62 { USB_DEVICE(0x0CF3, 0x3000) },
64 /* Atheros AR3011 with sflash firmware*/
65 { USB_DEVICE(0x0CF3, 0x3002) },
66 { USB_DEVICE(0x0CF3, 0xE019) },
67 { USB_DEVICE(0x13d3, 0x3304) },
68 { USB_DEVICE(0x0930, 0x0215) },
69 { USB_DEVICE(0x0489, 0xE03D) },
70 { USB_DEVICE(0x0489, 0xE027) },
72 /* Atheros AR9285 Malbec with sflash firmware */
73 { USB_DEVICE(0x03F0, 0x311D) },
75 /* Atheros AR3012 with sflash firmware*/
76 { USB_DEVICE(0x0CF3, 0x0036) },
77 { USB_DEVICE(0x0CF3, 0x3004) },
78 { USB_DEVICE(0x0CF3, 0x3008) },
79 { USB_DEVICE(0x0CF3, 0x311D) },
80 { USB_DEVICE(0x0CF3, 0x817a) },
81 { USB_DEVICE(0x13d3, 0x3375) },
82 { USB_DEVICE(0x04CA, 0x3004) },
83 { USB_DEVICE(0x04CA, 0x3005) },
84 { USB_DEVICE(0x04CA, 0x3006) },
85 { USB_DEVICE(0x04CA, 0x3008) },
86 { USB_DEVICE(0x13d3, 0x3362) },
87 { USB_DEVICE(0x0CF3, 0xE004) },
88 { USB_DEVICE(0x0930, 0x0219) },
89 { USB_DEVICE(0x0489, 0xe057) },
90 { USB_DEVICE(0x13d3, 0x3393) },
91 { USB_DEVICE(0x0489, 0xe04e) },
92 { USB_DEVICE(0x0489, 0xe056) },
93 { USB_DEVICE(0x0489, 0xe04d) },
94 { USB_DEVICE(0x04c5, 0x1330) },
96 /* Atheros AR5BBU12 with sflash firmware */
97 { USB_DEVICE(0x0489, 0xE02C) },
99 /* Atheros AR5BBU22 with sflash firmware */
100 { USB_DEVICE(0x0489, 0xE03C) },
101 { USB_DEVICE(0x0489, 0xE036) },
103 { } /* Terminating entry */
106 MODULE_DEVICE_TABLE(usb, ath3k_table);
108 #define BTUSB_ATH3012 0x80
109 /* This table is to load patch and sysconfig files
111 static struct usb_device_id ath3k_blist_tbl[] = {
113 /* Atheros AR3012 with sflash firmware*/
114 { USB_DEVICE(0x0CF3, 0x0036), .driver_info = BTUSB_ATH3012 },
115 { USB_DEVICE(0x0cf3, 0x3004), .driver_info = BTUSB_ATH3012 },
116 { USB_DEVICE(0x0cf3, 0x3008), .driver_info = BTUSB_ATH3012 },
117 { USB_DEVICE(0x0cf3, 0x311D), .driver_info = BTUSB_ATH3012 },
118 { USB_DEVICE(0x0CF3, 0x817a), .driver_info = BTUSB_ATH3012 },
119 { USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 },
120 { USB_DEVICE(0x04ca, 0x3004), .driver_info = BTUSB_ATH3012 },
121 { USB_DEVICE(0x04ca, 0x3005), .driver_info = BTUSB_ATH3012 },
122 { USB_DEVICE(0x04ca, 0x3006), .driver_info = BTUSB_ATH3012 },
123 { USB_DEVICE(0x04ca, 0x3008), .driver_info = BTUSB_ATH3012 },
124 { USB_DEVICE(0x13d3, 0x3362), .driver_info = BTUSB_ATH3012 },
125 { USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 },
126 { USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 },
127 { USB_DEVICE(0x0489, 0xe057), .driver_info = BTUSB_ATH3012 },
128 { USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 },
129 { USB_DEVICE(0x0489, 0xe04e), .driver_info = BTUSB_ATH3012 },
130 { USB_DEVICE(0x0489, 0xe056), .driver_info = BTUSB_ATH3012 },
131 { USB_DEVICE(0x0489, 0xe04d), .driver_info = BTUSB_ATH3012 },
132 { USB_DEVICE(0x04c5, 0x1330), .driver_info = BTUSB_ATH3012 },
134 /* Atheros AR5BBU22 with sflash firmware */
135 { USB_DEVICE(0x0489, 0xE03C), .driver_info = BTUSB_ATH3012 },
136 { USB_DEVICE(0x0489, 0xE036), .driver_info = BTUSB_ATH3012 },
138 { } /* Terminating entry */
141 #define USB_REQ_DFU_DNLOAD 1
142 #define BULK_SIZE 4096
143 #define FW_HDR_SIZE 20
145 static int ath3k_load_firmware(struct usb_device *udev,
146 const struct firmware *firmware)
149 int err, pipe, len, size, sent = 0;
150 int count = firmware->size;
152 BT_DBG("udev %p", udev);
154 pipe = usb_sndctrlpipe(udev, 0);
156 send_buf = kmalloc(BULK_SIZE, GFP_KERNEL);
158 BT_ERR("Can't allocate memory chunk for firmware");
162 memcpy(send_buf, firmware->data, 20);
163 if ((err = usb_control_msg(udev, pipe,
165 USB_TYPE_VENDOR, 0, 0,
166 send_buf, 20, USB_CTRL_SET_TIMEOUT)) < 0) {
167 BT_ERR("Can't change to loading configuration err");
174 size = min_t(uint, count, BULK_SIZE);
175 pipe = usb_sndbulkpipe(udev, 0x02);
176 memcpy(send_buf, firmware->data + sent, size);
178 err = usb_bulk_msg(udev, pipe, send_buf, size,
181 if (err || (len != size)) {
182 BT_ERR("Error in firmware loading err = %d,"
183 "len = %d, size = %d", err, len, size);
196 static int ath3k_get_state(struct usb_device *udev, unsigned char *state)
201 buf = kmalloc(sizeof(*buf), GFP_KERNEL);
205 pipe = usb_rcvctrlpipe(udev, 0);
206 ret = usb_control_msg(udev, pipe, ATH3K_GETSTATE,
207 USB_TYPE_VENDOR | USB_DIR_IN, 0, 0,
208 buf, sizeof(*buf), USB_CTRL_SET_TIMEOUT);
216 static int ath3k_get_version(struct usb_device *udev,
217 struct ath3k_version *version)
220 struct ath3k_version *buf;
221 const int size = sizeof(*buf);
223 buf = kmalloc(size, GFP_KERNEL);
227 pipe = usb_rcvctrlpipe(udev, 0);
228 ret = usb_control_msg(udev, pipe, ATH3K_GETVERSION,
229 USB_TYPE_VENDOR | USB_DIR_IN, 0, 0,
230 buf, size, USB_CTRL_SET_TIMEOUT);
232 memcpy(version, buf, size);
238 static int ath3k_load_fwfile(struct usb_device *udev,
239 const struct firmware *firmware)
242 int err, pipe, len, size, count, sent = 0;
245 count = firmware->size;
247 send_buf = kmalloc(BULK_SIZE, GFP_KERNEL);
249 BT_ERR("Can't allocate memory chunk for firmware");
253 size = min_t(uint, count, FW_HDR_SIZE);
254 memcpy(send_buf, firmware->data, size);
256 pipe = usb_sndctrlpipe(udev, 0);
257 ret = usb_control_msg(udev, pipe, ATH3K_DNLOAD,
258 USB_TYPE_VENDOR, 0, 0, send_buf,
259 size, USB_CTRL_SET_TIMEOUT);
261 BT_ERR("Can't change to loading configuration err");
270 size = min_t(uint, count, BULK_SIZE);
271 pipe = usb_sndbulkpipe(udev, 0x02);
273 memcpy(send_buf, firmware->data + sent, size);
275 err = usb_bulk_msg(udev, pipe, send_buf, size,
277 if (err || (len != size)) {
278 BT_ERR("Error in firmware loading err = %d,"
279 "len = %d, size = %d", err, len, size);
291 static int ath3k_switch_pid(struct usb_device *udev)
295 pipe = usb_sndctrlpipe(udev, 0);
296 return usb_control_msg(udev, pipe, USB_REG_SWITCH_VID_PID,
297 USB_TYPE_VENDOR, 0, 0,
298 NULL, 0, USB_CTRL_SET_TIMEOUT);
301 static int ath3k_set_normal_mode(struct usb_device *udev)
303 unsigned char fw_state;
306 ret = ath3k_get_state(udev, &fw_state);
308 BT_ERR("Can't get state to change to normal mode err");
312 if ((fw_state & ATH3K_MODE_MASK) == ATH3K_NORMAL_MODE) {
313 BT_DBG("firmware was already in normal mode");
317 pipe = usb_sndctrlpipe(udev, 0);
318 return usb_control_msg(udev, pipe, ATH3K_SET_NORMAL_MODE,
319 USB_TYPE_VENDOR, 0, 0,
320 NULL, 0, USB_CTRL_SET_TIMEOUT);
323 static int ath3k_load_patch(struct usb_device *udev)
325 unsigned char fw_state;
326 char filename[ATH3K_NAME_LEN] = {0};
327 const struct firmware *firmware;
328 struct ath3k_version fw_version, pt_version;
331 ret = ath3k_get_state(udev, &fw_state);
333 BT_ERR("Can't get state to change to load ram patch err");
337 if (fw_state & ATH3K_PATCH_UPDATE) {
338 BT_DBG("Patch was already downloaded");
342 ret = ath3k_get_version(udev, &fw_version);
344 BT_ERR("Can't get version to change to load ram patch err");
348 snprintf(filename, ATH3K_NAME_LEN, "ar3k/AthrBT_0x%08x.dfu",
349 fw_version.rom_version);
351 ret = request_firmware(&firmware, filename, &udev->dev);
353 BT_ERR("Patch file not found %s", filename);
357 pt_version.rom_version = *(int *)(firmware->data + firmware->size - 8);
358 pt_version.build_version = *(int *)
359 (firmware->data + firmware->size - 4);
361 if ((pt_version.rom_version != fw_version.rom_version) ||
362 (pt_version.build_version <= fw_version.build_version)) {
363 BT_ERR("Patch file version did not match with firmware");
364 release_firmware(firmware);
368 ret = ath3k_load_fwfile(udev, firmware);
369 release_firmware(firmware);
374 static int ath3k_load_syscfg(struct usb_device *udev)
376 unsigned char fw_state;
377 char filename[ATH3K_NAME_LEN] = {0};
378 const struct firmware *firmware;
379 struct ath3k_version fw_version;
382 ret = ath3k_get_state(udev, &fw_state);
384 BT_ERR("Can't get state to change to load configuration err");
388 ret = ath3k_get_version(udev, &fw_version);
390 BT_ERR("Can't get version to change to load ram patch err");
394 switch (fw_version.ref_clock) {
396 case ATH3K_XTAL_FREQ_26M:
399 case ATH3K_XTAL_FREQ_40M:
402 case ATH3K_XTAL_FREQ_19P2:
410 snprintf(filename, ATH3K_NAME_LEN, "ar3k/ramps_0x%08x_%d%s",
411 fw_version.rom_version, clk_value, ".dfu");
413 ret = request_firmware(&firmware, filename, &udev->dev);
415 BT_ERR("Configuration file not found %s", filename);
419 ret = ath3k_load_fwfile(udev, firmware);
420 release_firmware(firmware);
425 static int ath3k_probe(struct usb_interface *intf,
426 const struct usb_device_id *id)
428 const struct firmware *firmware;
429 struct usb_device *udev = interface_to_usbdev(intf);
432 BT_DBG("intf %p id %p", intf, id);
434 if (intf->cur_altsetting->desc.bInterfaceNumber != 0)
437 /* match device ID in ath3k blacklist table */
438 if (!id->driver_info) {
439 const struct usb_device_id *match;
440 match = usb_match_id(intf, ath3k_blist_tbl);
445 /* load patch and sysconfig files for AR3012 */
446 if (id->driver_info & BTUSB_ATH3012) {
448 /* New firmware with patch and sysconfig files already loaded */
449 if (le16_to_cpu(udev->descriptor.bcdDevice) > 0x0001)
452 ret = ath3k_load_patch(udev);
454 BT_ERR("Loading patch file failed");
457 ret = ath3k_load_syscfg(udev);
459 BT_ERR("Loading sysconfig file failed");
462 ret = ath3k_set_normal_mode(udev);
464 BT_ERR("Set normal mode failed");
467 ath3k_switch_pid(udev);
471 ret = request_firmware(&firmware, ATH3K_FIRMWARE, &udev->dev);
474 BT_ERR("Firmware file \"%s\" not found",
477 BT_ERR("Firmware file \"%s\" request failed (err=%d)",
478 ATH3K_FIRMWARE, ret);
482 ret = ath3k_load_firmware(udev, firmware);
483 release_firmware(firmware);
488 static void ath3k_disconnect(struct usb_interface *intf)
490 BT_DBG("ath3k_disconnect intf %p", intf);
493 static struct usb_driver ath3k_driver = {
495 .probe = ath3k_probe,
496 .disconnect = ath3k_disconnect,
497 .id_table = ath3k_table,
498 .disable_hub_initiated_lpm = 1,
501 module_usb_driver(ath3k_driver);
503 MODULE_AUTHOR("Atheros Communications");
504 MODULE_DESCRIPTION("Atheros AR30xx firmware driver");
505 MODULE_VERSION(VERSION);
506 MODULE_LICENSE("GPL");
507 MODULE_FIRMWARE(ATH3K_FIRMWARE);