KVM: emulator: emulate SALC
[firefly-linux-kernel-4.4.55.git] / drivers / dma / coh901318.c
1 /*
2  * driver/dma/coh901318.c
3  *
4  * Copyright (C) 2007-2009 ST-Ericsson
5  * License terms: GNU General Public License (GPL) version 2
6  * DMA driver for COH 901 318
7  * Author: Per Friden <per.friden@stericsson.com>
8  */
9
10 #include <linux/init.h>
11 #include <linux/module.h>
12 #include <linux/kernel.h> /* printk() */
13 #include <linux/fs.h> /* everything... */
14 #include <linux/scatterlist.h>
15 #include <linux/slab.h> /* kmalloc() */
16 #include <linux/dmaengine.h>
17 #include <linux/platform_device.h>
18 #include <linux/device.h>
19 #include <linux/irqreturn.h>
20 #include <linux/interrupt.h>
21 #include <linux/io.h>
22 #include <linux/uaccess.h>
23 #include <linux/debugfs.h>
24 #include <linux/platform_data/dma-coh901318.h>
25
26 #include "coh901318.h"
27 #include "dmaengine.h"
28
29 #define COH901318_MOD32_MASK                                    (0x1F)
30 #define COH901318_WORD_MASK                                     (0xFFFFFFFF)
31 /* INT_STATUS - Interrupt Status Registers 32bit (R/-) */
32 #define COH901318_INT_STATUS1                                   (0x0000)
33 #define COH901318_INT_STATUS2                                   (0x0004)
34 /* TC_INT_STATUS - Terminal Count Interrupt Status Registers 32bit (R/-) */
35 #define COH901318_TC_INT_STATUS1                                (0x0008)
36 #define COH901318_TC_INT_STATUS2                                (0x000C)
37 /* TC_INT_CLEAR - Terminal Count Interrupt Clear Registers 32bit (-/W) */
38 #define COH901318_TC_INT_CLEAR1                                 (0x0010)
39 #define COH901318_TC_INT_CLEAR2                                 (0x0014)
40 /* RAW_TC_INT_STATUS - Raw Term Count Interrupt Status Registers 32bit (R/-) */
41 #define COH901318_RAW_TC_INT_STATUS1                            (0x0018)
42 #define COH901318_RAW_TC_INT_STATUS2                            (0x001C)
43 /* BE_INT_STATUS - Bus Error Interrupt Status Registers 32bit (R/-) */
44 #define COH901318_BE_INT_STATUS1                                (0x0020)
45 #define COH901318_BE_INT_STATUS2                                (0x0024)
46 /* BE_INT_CLEAR - Bus Error Interrupt Clear Registers 32bit (-/W) */
47 #define COH901318_BE_INT_CLEAR1                                 (0x0028)
48 #define COH901318_BE_INT_CLEAR2                                 (0x002C)
49 /* RAW_BE_INT_STATUS - Raw Term Count Interrupt Status Registers 32bit (R/-) */
50 #define COH901318_RAW_BE_INT_STATUS1                            (0x0030)
51 #define COH901318_RAW_BE_INT_STATUS2                            (0x0034)
52
53 /*
54  * CX_CFG - Channel Configuration Registers 32bit (R/W)
55  */
56 #define COH901318_CX_CFG                                        (0x0100)
57 #define COH901318_CX_CFG_SPACING                                (0x04)
58 /* Channel enable activates tha dma job */
59 #define COH901318_CX_CFG_CH_ENABLE                              (0x00000001)
60 #define COH901318_CX_CFG_CH_DISABLE                             (0x00000000)
61 /* Request Mode */
62 #define COH901318_CX_CFG_RM_MASK                                (0x00000006)
63 #define COH901318_CX_CFG_RM_MEMORY_TO_MEMORY                    (0x0 << 1)
64 #define COH901318_CX_CFG_RM_PRIMARY_TO_MEMORY                   (0x1 << 1)
65 #define COH901318_CX_CFG_RM_MEMORY_TO_PRIMARY                   (0x1 << 1)
66 #define COH901318_CX_CFG_RM_PRIMARY_TO_SECONDARY                (0x3 << 1)
67 #define COH901318_CX_CFG_RM_SECONDARY_TO_PRIMARY                (0x3 << 1)
68 /* Linked channel request field. RM must == 11 */
69 #define COH901318_CX_CFG_LCRF_SHIFT                             3
70 #define COH901318_CX_CFG_LCRF_MASK                              (0x000001F8)
71 #define COH901318_CX_CFG_LCR_DISABLE                            (0x00000000)
72 /* Terminal Counter Interrupt Request Mask */
73 #define COH901318_CX_CFG_TC_IRQ_ENABLE                          (0x00000200)
74 #define COH901318_CX_CFG_TC_IRQ_DISABLE                         (0x00000000)
75 /* Bus Error interrupt Mask */
76 #define COH901318_CX_CFG_BE_IRQ_ENABLE                          (0x00000400)
77 #define COH901318_CX_CFG_BE_IRQ_DISABLE                         (0x00000000)
78
79 /*
80  * CX_STAT - Channel Status Registers 32bit (R/-)
81  */
82 #define COH901318_CX_STAT                                       (0x0200)
83 #define COH901318_CX_STAT_SPACING                               (0x04)
84 #define COH901318_CX_STAT_RBE_IRQ_IND                           (0x00000008)
85 #define COH901318_CX_STAT_RTC_IRQ_IND                           (0x00000004)
86 #define COH901318_CX_STAT_ACTIVE                                (0x00000002)
87 #define COH901318_CX_STAT_ENABLED                               (0x00000001)
88
89 /*
90  * CX_CTRL - Channel Control Registers 32bit (R/W)
91  */
92 #define COH901318_CX_CTRL                                       (0x0400)
93 #define COH901318_CX_CTRL_SPACING                               (0x10)
94 /* Transfer Count Enable */
95 #define COH901318_CX_CTRL_TC_ENABLE                             (0x00001000)
96 #define COH901318_CX_CTRL_TC_DISABLE                            (0x00000000)
97 /* Transfer Count Value 0 - 4095 */
98 #define COH901318_CX_CTRL_TC_VALUE_MASK                         (0x00000FFF)
99 /* Burst count */
100 #define COH901318_CX_CTRL_BURST_COUNT_MASK                      (0x0000E000)
101 #define COH901318_CX_CTRL_BURST_COUNT_64_BYTES                  (0x7 << 13)
102 #define COH901318_CX_CTRL_BURST_COUNT_48_BYTES                  (0x6 << 13)
103 #define COH901318_CX_CTRL_BURST_COUNT_32_BYTES                  (0x5 << 13)
104 #define COH901318_CX_CTRL_BURST_COUNT_16_BYTES                  (0x4 << 13)
105 #define COH901318_CX_CTRL_BURST_COUNT_8_BYTES                   (0x3 << 13)
106 #define COH901318_CX_CTRL_BURST_COUNT_4_BYTES                   (0x2 << 13)
107 #define COH901318_CX_CTRL_BURST_COUNT_2_BYTES                   (0x1 << 13)
108 #define COH901318_CX_CTRL_BURST_COUNT_1_BYTE                    (0x0 << 13)
109 /* Source bus size  */
110 #define COH901318_CX_CTRL_SRC_BUS_SIZE_MASK                     (0x00030000)
111 #define COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS                  (0x2 << 16)
112 #define COH901318_CX_CTRL_SRC_BUS_SIZE_16_BITS                  (0x1 << 16)
113 #define COH901318_CX_CTRL_SRC_BUS_SIZE_8_BITS                   (0x0 << 16)
114 /* Source address increment */
115 #define COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE                   (0x00040000)
116 #define COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE                  (0x00000000)
117 /* Destination Bus Size */
118 #define COH901318_CX_CTRL_DST_BUS_SIZE_MASK                     (0x00180000)
119 #define COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS                  (0x2 << 19)
120 #define COH901318_CX_CTRL_DST_BUS_SIZE_16_BITS                  (0x1 << 19)
121 #define COH901318_CX_CTRL_DST_BUS_SIZE_8_BITS                   (0x0 << 19)
122 /* Destination address increment */
123 #define COH901318_CX_CTRL_DST_ADDR_INC_ENABLE                   (0x00200000)
124 #define COH901318_CX_CTRL_DST_ADDR_INC_DISABLE                  (0x00000000)
125 /* Master Mode (Master2 is only connected to MSL) */
126 #define COH901318_CX_CTRL_MASTER_MODE_MASK                      (0x00C00000)
127 #define COH901318_CX_CTRL_MASTER_MODE_M2R_M1W                   (0x3 << 22)
128 #define COH901318_CX_CTRL_MASTER_MODE_M1R_M2W                   (0x2 << 22)
129 #define COH901318_CX_CTRL_MASTER_MODE_M2RW                      (0x1 << 22)
130 #define COH901318_CX_CTRL_MASTER_MODE_M1RW                      (0x0 << 22)
131 /* Terminal Count flag to PER enable */
132 #define COH901318_CX_CTRL_TCP_ENABLE                            (0x01000000)
133 #define COH901318_CX_CTRL_TCP_DISABLE                           (0x00000000)
134 /* Terminal Count flags to CPU enable */
135 #define COH901318_CX_CTRL_TC_IRQ_ENABLE                         (0x02000000)
136 #define COH901318_CX_CTRL_TC_IRQ_DISABLE                        (0x00000000)
137 /* Hand shake to peripheral */
138 #define COH901318_CX_CTRL_HSP_ENABLE                            (0x04000000)
139 #define COH901318_CX_CTRL_HSP_DISABLE                           (0x00000000)
140 #define COH901318_CX_CTRL_HSS_ENABLE                            (0x08000000)
141 #define COH901318_CX_CTRL_HSS_DISABLE                           (0x00000000)
142 /* DMA mode */
143 #define COH901318_CX_CTRL_DDMA_MASK                             (0x30000000)
144 #define COH901318_CX_CTRL_DDMA_LEGACY                           (0x0 << 28)
145 #define COH901318_CX_CTRL_DDMA_DEMAND_DMA1                      (0x1 << 28)
146 #define COH901318_CX_CTRL_DDMA_DEMAND_DMA2                      (0x2 << 28)
147 /* Primary Request Data Destination */
148 #define COH901318_CX_CTRL_PRDD_MASK                             (0x40000000)
149 #define COH901318_CX_CTRL_PRDD_DEST                             (0x1 << 30)
150 #define COH901318_CX_CTRL_PRDD_SOURCE                           (0x0 << 30)
151
152 /*
153  * CX_SRC_ADDR - Channel Source Address Registers 32bit (R/W)
154  */
155 #define COH901318_CX_SRC_ADDR                                   (0x0404)
156 #define COH901318_CX_SRC_ADDR_SPACING                           (0x10)
157
158 /*
159  * CX_DST_ADDR - Channel Destination Address Registers 32bit R/W
160  */
161 #define COH901318_CX_DST_ADDR                                   (0x0408)
162 #define COH901318_CX_DST_ADDR_SPACING                           (0x10)
163
164 /*
165  * CX_LNK_ADDR - Channel Link Address Registers 32bit (R/W)
166  */
167 #define COH901318_CX_LNK_ADDR                                   (0x040C)
168 #define COH901318_CX_LNK_ADDR_SPACING                           (0x10)
169 #define COH901318_CX_LNK_LINK_IMMEDIATE                         (0x00000001)
170
171 /**
172  * struct coh901318_params - parameters for DMAC configuration
173  * @config: DMA config register
174  * @ctrl_lli_last: DMA control register for the last lli in the list
175  * @ctrl_lli: DMA control register for an lli
176  * @ctrl_lli_chained: DMA control register for a chained lli
177  */
178 struct coh901318_params {
179         u32 config;
180         u32 ctrl_lli_last;
181         u32 ctrl_lli;
182         u32 ctrl_lli_chained;
183 };
184
185 /**
186  * struct coh_dma_channel - dma channel base
187  * @name: ascii name of dma channel
188  * @number: channel id number
189  * @desc_nbr_max: number of preallocated descriptors
190  * @priority_high: prio of channel, 0 low otherwise high.
191  * @param: configuration parameters
192  */
193 struct coh_dma_channel {
194         const char name[32];
195         const int number;
196         const int desc_nbr_max;
197         const int priority_high;
198         const struct coh901318_params param;
199 };
200
201 /**
202  * struct powersave - DMA power save structure
203  * @lock: lock protecting data in this struct
204  * @started_channels: bit mask indicating active dma channels
205  */
206 struct powersave {
207         spinlock_t lock;
208         u64 started_channels;
209 };
210
211 /* points out all dma slave channels.
212  * Syntax is [A1, B1, A2, B2, .... ,-1,-1]
213  * Select all channels from A to B, end of list is marked with -1,-1
214  */
215 static int dma_slave_channels[] = {
216         U300_DMA_MSL_TX_0, U300_DMA_SPI_RX,
217         U300_DMA_UART1_TX, U300_DMA_UART1_RX, -1, -1};
218
219 /* points out all dma memcpy channels. */
220 static int dma_memcpy_channels[] = {
221         U300_DMA_GENERAL_PURPOSE_0, U300_DMA_GENERAL_PURPOSE_8, -1, -1};
222
223 #define flags_memcpy_config (COH901318_CX_CFG_CH_DISABLE | \
224                         COH901318_CX_CFG_RM_MEMORY_TO_MEMORY | \
225                         COH901318_CX_CFG_LCR_DISABLE | \
226                         COH901318_CX_CFG_TC_IRQ_ENABLE | \
227                         COH901318_CX_CFG_BE_IRQ_ENABLE)
228 #define flags_memcpy_lli_chained (COH901318_CX_CTRL_TC_ENABLE | \
229                         COH901318_CX_CTRL_BURST_COUNT_32_BYTES | \
230                         COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS | \
231                         COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE | \
232                         COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS | \
233                         COH901318_CX_CTRL_DST_ADDR_INC_ENABLE | \
234                         COH901318_CX_CTRL_MASTER_MODE_M1RW | \
235                         COH901318_CX_CTRL_TCP_DISABLE | \
236                         COH901318_CX_CTRL_TC_IRQ_DISABLE | \
237                         COH901318_CX_CTRL_HSP_DISABLE | \
238                         COH901318_CX_CTRL_HSS_DISABLE | \
239                         COH901318_CX_CTRL_DDMA_LEGACY | \
240                         COH901318_CX_CTRL_PRDD_SOURCE)
241 #define flags_memcpy_lli (COH901318_CX_CTRL_TC_ENABLE | \
242                         COH901318_CX_CTRL_BURST_COUNT_32_BYTES | \
243                         COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS | \
244                         COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE | \
245                         COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS | \
246                         COH901318_CX_CTRL_DST_ADDR_INC_ENABLE | \
247                         COH901318_CX_CTRL_MASTER_MODE_M1RW | \
248                         COH901318_CX_CTRL_TCP_DISABLE | \
249                         COH901318_CX_CTRL_TC_IRQ_DISABLE | \
250                         COH901318_CX_CTRL_HSP_DISABLE | \
251                         COH901318_CX_CTRL_HSS_DISABLE | \
252                         COH901318_CX_CTRL_DDMA_LEGACY | \
253                         COH901318_CX_CTRL_PRDD_SOURCE)
254 #define flags_memcpy_lli_last (COH901318_CX_CTRL_TC_ENABLE | \
255                         COH901318_CX_CTRL_BURST_COUNT_32_BYTES | \
256                         COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS | \
257                         COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE | \
258                         COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS | \
259                         COH901318_CX_CTRL_DST_ADDR_INC_ENABLE | \
260                         COH901318_CX_CTRL_MASTER_MODE_M1RW | \
261                         COH901318_CX_CTRL_TCP_DISABLE | \
262                         COH901318_CX_CTRL_TC_IRQ_ENABLE | \
263                         COH901318_CX_CTRL_HSP_DISABLE | \
264                         COH901318_CX_CTRL_HSS_DISABLE | \
265                         COH901318_CX_CTRL_DDMA_LEGACY | \
266                         COH901318_CX_CTRL_PRDD_SOURCE)
267
268 const struct coh_dma_channel chan_config[U300_DMA_CHANNELS] = {
269         {
270                 .number = U300_DMA_MSL_TX_0,
271                 .name = "MSL TX 0",
272                 .priority_high = 0,
273         },
274         {
275                 .number = U300_DMA_MSL_TX_1,
276                 .name = "MSL TX 1",
277                 .priority_high = 0,
278                 .param.config = COH901318_CX_CFG_CH_DISABLE |
279                                 COH901318_CX_CFG_LCR_DISABLE |
280                                 COH901318_CX_CFG_TC_IRQ_ENABLE |
281                                 COH901318_CX_CFG_BE_IRQ_ENABLE,
282                 .param.ctrl_lli_chained = 0 |
283                                 COH901318_CX_CTRL_TC_ENABLE |
284                                 COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
285                                 COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
286                                 COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
287                                 COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
288                                 COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
289                                 COH901318_CX_CTRL_MASTER_MODE_M1R_M2W |
290                                 COH901318_CX_CTRL_TCP_DISABLE |
291                                 COH901318_CX_CTRL_TC_IRQ_DISABLE |
292                                 COH901318_CX_CTRL_HSP_ENABLE |
293                                 COH901318_CX_CTRL_HSS_DISABLE |
294                                 COH901318_CX_CTRL_DDMA_LEGACY |
295                                 COH901318_CX_CTRL_PRDD_SOURCE,
296                 .param.ctrl_lli = 0 |
297                                 COH901318_CX_CTRL_TC_ENABLE |
298                                 COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
299                                 COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
300                                 COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
301                                 COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
302                                 COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
303                                 COH901318_CX_CTRL_MASTER_MODE_M1R_M2W |
304                                 COH901318_CX_CTRL_TCP_ENABLE |
305                                 COH901318_CX_CTRL_TC_IRQ_DISABLE |
306                                 COH901318_CX_CTRL_HSP_ENABLE |
307                                 COH901318_CX_CTRL_HSS_DISABLE |
308                                 COH901318_CX_CTRL_DDMA_LEGACY |
309                                 COH901318_CX_CTRL_PRDD_SOURCE,
310                 .param.ctrl_lli_last = 0 |
311                                 COH901318_CX_CTRL_TC_ENABLE |
312                                 COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
313                                 COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
314                                 COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
315                                 COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
316                                 COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
317                                 COH901318_CX_CTRL_MASTER_MODE_M1R_M2W |
318                                 COH901318_CX_CTRL_TCP_ENABLE |
319                                 COH901318_CX_CTRL_TC_IRQ_ENABLE |
320                                 COH901318_CX_CTRL_HSP_ENABLE |
321                                 COH901318_CX_CTRL_HSS_DISABLE |
322                                 COH901318_CX_CTRL_DDMA_LEGACY |
323                                 COH901318_CX_CTRL_PRDD_SOURCE,
324         },
325         {
326                 .number = U300_DMA_MSL_TX_2,
327                 .name = "MSL TX 2",
328                 .priority_high = 0,
329                 .param.config = COH901318_CX_CFG_CH_DISABLE |
330                                 COH901318_CX_CFG_LCR_DISABLE |
331                                 COH901318_CX_CFG_TC_IRQ_ENABLE |
332                                 COH901318_CX_CFG_BE_IRQ_ENABLE,
333                 .param.ctrl_lli_chained = 0 |
334                                 COH901318_CX_CTRL_TC_ENABLE |
335                                 COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
336                                 COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
337                                 COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
338                                 COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
339                                 COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
340                                 COH901318_CX_CTRL_MASTER_MODE_M1R_M2W |
341                                 COH901318_CX_CTRL_TCP_DISABLE |
342                                 COH901318_CX_CTRL_TC_IRQ_DISABLE |
343                                 COH901318_CX_CTRL_HSP_ENABLE |
344                                 COH901318_CX_CTRL_HSS_DISABLE |
345                                 COH901318_CX_CTRL_DDMA_LEGACY |
346                                 COH901318_CX_CTRL_PRDD_SOURCE,
347                 .param.ctrl_lli = 0 |
348                                 COH901318_CX_CTRL_TC_ENABLE |
349                                 COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
350                                 COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
351                                 COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
352                                 COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
353                                 COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
354                                 COH901318_CX_CTRL_MASTER_MODE_M1R_M2W |
355                                 COH901318_CX_CTRL_TCP_ENABLE |
356                                 COH901318_CX_CTRL_TC_IRQ_DISABLE |
357                                 COH901318_CX_CTRL_HSP_ENABLE |
358                                 COH901318_CX_CTRL_HSS_DISABLE |
359                                 COH901318_CX_CTRL_DDMA_LEGACY |
360                                 COH901318_CX_CTRL_PRDD_SOURCE,
361                 .param.ctrl_lli_last = 0 |
362                                 COH901318_CX_CTRL_TC_ENABLE |
363                                 COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
364                                 COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
365                                 COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
366                                 COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
367                                 COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
368                                 COH901318_CX_CTRL_MASTER_MODE_M1R_M2W |
369                                 COH901318_CX_CTRL_TCP_ENABLE |
370                                 COH901318_CX_CTRL_TC_IRQ_ENABLE |
371                                 COH901318_CX_CTRL_HSP_ENABLE |
372                                 COH901318_CX_CTRL_HSS_DISABLE |
373                                 COH901318_CX_CTRL_DDMA_LEGACY |
374                                 COH901318_CX_CTRL_PRDD_SOURCE,
375                 .desc_nbr_max = 10,
376         },
377         {
378                 .number = U300_DMA_MSL_TX_3,
379                 .name = "MSL TX 3",
380                 .priority_high = 0,
381                 .param.config = COH901318_CX_CFG_CH_DISABLE |
382                                 COH901318_CX_CFG_LCR_DISABLE |
383                                 COH901318_CX_CFG_TC_IRQ_ENABLE |
384                                 COH901318_CX_CFG_BE_IRQ_ENABLE,
385                 .param.ctrl_lli_chained = 0 |
386                                 COH901318_CX_CTRL_TC_ENABLE |
387                                 COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
388                                 COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
389                                 COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
390                                 COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
391                                 COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
392                                 COH901318_CX_CTRL_MASTER_MODE_M1R_M2W |
393                                 COH901318_CX_CTRL_TCP_DISABLE |
394                                 COH901318_CX_CTRL_TC_IRQ_DISABLE |
395                                 COH901318_CX_CTRL_HSP_ENABLE |
396                                 COH901318_CX_CTRL_HSS_DISABLE |
397                                 COH901318_CX_CTRL_DDMA_LEGACY |
398                                 COH901318_CX_CTRL_PRDD_SOURCE,
399                 .param.ctrl_lli = 0 |
400                                 COH901318_CX_CTRL_TC_ENABLE |
401                                 COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
402                                 COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
403                                 COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
404                                 COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
405                                 COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
406                                 COH901318_CX_CTRL_MASTER_MODE_M1R_M2W |
407                                 COH901318_CX_CTRL_TCP_ENABLE |
408                                 COH901318_CX_CTRL_TC_IRQ_DISABLE |
409                                 COH901318_CX_CTRL_HSP_ENABLE |
410                                 COH901318_CX_CTRL_HSS_DISABLE |
411                                 COH901318_CX_CTRL_DDMA_LEGACY |
412                                 COH901318_CX_CTRL_PRDD_SOURCE,
413                 .param.ctrl_lli_last = 0 |
414                                 COH901318_CX_CTRL_TC_ENABLE |
415                                 COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
416                                 COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
417                                 COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
418                                 COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
419                                 COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
420                                 COH901318_CX_CTRL_MASTER_MODE_M1R_M2W |
421                                 COH901318_CX_CTRL_TCP_ENABLE |
422                                 COH901318_CX_CTRL_TC_IRQ_ENABLE |
423                                 COH901318_CX_CTRL_HSP_ENABLE |
424                                 COH901318_CX_CTRL_HSS_DISABLE |
425                                 COH901318_CX_CTRL_DDMA_LEGACY |
426                                 COH901318_CX_CTRL_PRDD_SOURCE,
427         },
428         {
429                 .number = U300_DMA_MSL_TX_4,
430                 .name = "MSL TX 4",
431                 .priority_high = 0,
432                 .param.config = COH901318_CX_CFG_CH_DISABLE |
433                                 COH901318_CX_CFG_LCR_DISABLE |
434                                 COH901318_CX_CFG_TC_IRQ_ENABLE |
435                                 COH901318_CX_CFG_BE_IRQ_ENABLE,
436                 .param.ctrl_lli_chained = 0 |
437                                 COH901318_CX_CTRL_TC_ENABLE |
438                                 COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
439                                 COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
440                                 COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
441                                 COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
442                                 COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
443                                 COH901318_CX_CTRL_MASTER_MODE_M1R_M2W |
444                                 COH901318_CX_CTRL_TCP_DISABLE |
445                                 COH901318_CX_CTRL_TC_IRQ_DISABLE |
446                                 COH901318_CX_CTRL_HSP_ENABLE |
447                                 COH901318_CX_CTRL_HSS_DISABLE |
448                                 COH901318_CX_CTRL_DDMA_LEGACY |
449                                 COH901318_CX_CTRL_PRDD_SOURCE,
450                 .param.ctrl_lli = 0 |
451                                 COH901318_CX_CTRL_TC_ENABLE |
452                                 COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
453                                 COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
454                                 COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
455                                 COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
456                                 COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
457                                 COH901318_CX_CTRL_MASTER_MODE_M1R_M2W |
458                                 COH901318_CX_CTRL_TCP_ENABLE |
459                                 COH901318_CX_CTRL_TC_IRQ_DISABLE |
460                                 COH901318_CX_CTRL_HSP_ENABLE |
461                                 COH901318_CX_CTRL_HSS_DISABLE |
462                                 COH901318_CX_CTRL_DDMA_LEGACY |
463                                 COH901318_CX_CTRL_PRDD_SOURCE,
464                 .param.ctrl_lli_last = 0 |
465                                 COH901318_CX_CTRL_TC_ENABLE |
466                                 COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
467                                 COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
468                                 COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
469                                 COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
470                                 COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
471                                 COH901318_CX_CTRL_MASTER_MODE_M1R_M2W |
472                                 COH901318_CX_CTRL_TCP_ENABLE |
473                                 COH901318_CX_CTRL_TC_IRQ_ENABLE |
474                                 COH901318_CX_CTRL_HSP_ENABLE |
475                                 COH901318_CX_CTRL_HSS_DISABLE |
476                                 COH901318_CX_CTRL_DDMA_LEGACY |
477                                 COH901318_CX_CTRL_PRDD_SOURCE,
478         },
479         {
480                 .number = U300_DMA_MSL_TX_5,
481                 .name = "MSL TX 5",
482                 .priority_high = 0,
483         },
484         {
485                 .number = U300_DMA_MSL_TX_6,
486                 .name = "MSL TX 6",
487                 .priority_high = 0,
488         },
489         {
490                 .number = U300_DMA_MSL_RX_0,
491                 .name = "MSL RX 0",
492                 .priority_high = 0,
493         },
494         {
495                 .number = U300_DMA_MSL_RX_1,
496                 .name = "MSL RX 1",
497                 .priority_high = 0,
498                 .param.config = COH901318_CX_CFG_CH_DISABLE |
499                                 COH901318_CX_CFG_LCR_DISABLE |
500                                 COH901318_CX_CFG_TC_IRQ_ENABLE |
501                                 COH901318_CX_CFG_BE_IRQ_ENABLE,
502                 .param.ctrl_lli_chained = 0 |
503                                 COH901318_CX_CTRL_TC_ENABLE |
504                                 COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
505                                 COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
506                                 COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
507                                 COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
508                                 COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
509                                 COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
510                                 COH901318_CX_CTRL_TCP_DISABLE |
511                                 COH901318_CX_CTRL_TC_IRQ_DISABLE |
512                                 COH901318_CX_CTRL_HSP_ENABLE |
513                                 COH901318_CX_CTRL_HSS_DISABLE |
514                                 COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
515                                 COH901318_CX_CTRL_PRDD_DEST,
516                 .param.ctrl_lli = 0,
517                 .param.ctrl_lli_last = 0 |
518                                 COH901318_CX_CTRL_TC_ENABLE |
519                                 COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
520                                 COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
521                                 COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
522                                 COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
523                                 COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
524                                 COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
525                                 COH901318_CX_CTRL_TCP_DISABLE |
526                                 COH901318_CX_CTRL_TC_IRQ_ENABLE |
527                                 COH901318_CX_CTRL_HSP_ENABLE |
528                                 COH901318_CX_CTRL_HSS_DISABLE |
529                                 COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
530                                 COH901318_CX_CTRL_PRDD_DEST,
531         },
532         {
533                 .number = U300_DMA_MSL_RX_2,
534                 .name = "MSL RX 2",
535                 .priority_high = 0,
536                 .param.config = COH901318_CX_CFG_CH_DISABLE |
537                                 COH901318_CX_CFG_LCR_DISABLE |
538                                 COH901318_CX_CFG_TC_IRQ_ENABLE |
539                                 COH901318_CX_CFG_BE_IRQ_ENABLE,
540                 .param.ctrl_lli_chained = 0 |
541                                 COH901318_CX_CTRL_TC_ENABLE |
542                                 COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
543                                 COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
544                                 COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
545                                 COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
546                                 COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
547                                 COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
548                                 COH901318_CX_CTRL_TCP_DISABLE |
549                                 COH901318_CX_CTRL_TC_IRQ_DISABLE |
550                                 COH901318_CX_CTRL_HSP_ENABLE |
551                                 COH901318_CX_CTRL_HSS_DISABLE |
552                                 COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
553                                 COH901318_CX_CTRL_PRDD_DEST,
554                 .param.ctrl_lli = 0 |
555                                 COH901318_CX_CTRL_TC_ENABLE |
556                                 COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
557                                 COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
558                                 COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
559                                 COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
560                                 COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
561                                 COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
562                                 COH901318_CX_CTRL_TCP_DISABLE |
563                                 COH901318_CX_CTRL_TC_IRQ_ENABLE |
564                                 COH901318_CX_CTRL_HSP_ENABLE |
565                                 COH901318_CX_CTRL_HSS_DISABLE |
566                                 COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
567                                 COH901318_CX_CTRL_PRDD_DEST,
568                 .param.ctrl_lli_last = 0 |
569                                 COH901318_CX_CTRL_TC_ENABLE |
570                                 COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
571                                 COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
572                                 COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
573                                 COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
574                                 COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
575                                 COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
576                                 COH901318_CX_CTRL_TCP_DISABLE |
577                                 COH901318_CX_CTRL_TC_IRQ_ENABLE |
578                                 COH901318_CX_CTRL_HSP_ENABLE |
579                                 COH901318_CX_CTRL_HSS_DISABLE |
580                                 COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
581                                 COH901318_CX_CTRL_PRDD_DEST,
582         },
583         {
584                 .number = U300_DMA_MSL_RX_3,
585                 .name = "MSL RX 3",
586                 .priority_high = 0,
587                 .param.config = COH901318_CX_CFG_CH_DISABLE |
588                                 COH901318_CX_CFG_LCR_DISABLE |
589                                 COH901318_CX_CFG_TC_IRQ_ENABLE |
590                                 COH901318_CX_CFG_BE_IRQ_ENABLE,
591                 .param.ctrl_lli_chained = 0 |
592                                 COH901318_CX_CTRL_TC_ENABLE |
593                                 COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
594                                 COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
595                                 COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
596                                 COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
597                                 COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
598                                 COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
599                                 COH901318_CX_CTRL_TCP_DISABLE |
600                                 COH901318_CX_CTRL_TC_IRQ_DISABLE |
601                                 COH901318_CX_CTRL_HSP_ENABLE |
602                                 COH901318_CX_CTRL_HSS_DISABLE |
603                                 COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
604                                 COH901318_CX_CTRL_PRDD_DEST,
605                 .param.ctrl_lli = 0 |
606                                 COH901318_CX_CTRL_TC_ENABLE |
607                                 COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
608                                 COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
609                                 COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
610                                 COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
611                                 COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
612                                 COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
613                                 COH901318_CX_CTRL_TCP_DISABLE |
614                                 COH901318_CX_CTRL_TC_IRQ_ENABLE |
615                                 COH901318_CX_CTRL_HSP_ENABLE |
616                                 COH901318_CX_CTRL_HSS_DISABLE |
617                                 COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
618                                 COH901318_CX_CTRL_PRDD_DEST,
619                 .param.ctrl_lli_last = 0 |
620                                 COH901318_CX_CTRL_TC_ENABLE |
621                                 COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
622                                 COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
623                                 COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
624                                 COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
625                                 COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
626                                 COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
627                                 COH901318_CX_CTRL_TCP_DISABLE |
628                                 COH901318_CX_CTRL_TC_IRQ_ENABLE |
629                                 COH901318_CX_CTRL_HSP_ENABLE |
630                                 COH901318_CX_CTRL_HSS_DISABLE |
631                                 COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
632                                 COH901318_CX_CTRL_PRDD_DEST,
633         },
634         {
635                 .number = U300_DMA_MSL_RX_4,
636                 .name = "MSL RX 4",
637                 .priority_high = 0,
638                 .param.config = COH901318_CX_CFG_CH_DISABLE |
639                                 COH901318_CX_CFG_LCR_DISABLE |
640                                 COH901318_CX_CFG_TC_IRQ_ENABLE |
641                                 COH901318_CX_CFG_BE_IRQ_ENABLE,
642                 .param.ctrl_lli_chained = 0 |
643                                 COH901318_CX_CTRL_TC_ENABLE |
644                                 COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
645                                 COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
646                                 COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
647                                 COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
648                                 COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
649                                 COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
650                                 COH901318_CX_CTRL_TCP_DISABLE |
651                                 COH901318_CX_CTRL_TC_IRQ_DISABLE |
652                                 COH901318_CX_CTRL_HSP_ENABLE |
653                                 COH901318_CX_CTRL_HSS_DISABLE |
654                                 COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
655                                 COH901318_CX_CTRL_PRDD_DEST,
656                 .param.ctrl_lli = 0 |
657                                 COH901318_CX_CTRL_TC_ENABLE |
658                                 COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
659                                 COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
660                                 COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
661                                 COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
662                                 COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
663                                 COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
664                                 COH901318_CX_CTRL_TCP_DISABLE |
665                                 COH901318_CX_CTRL_TC_IRQ_ENABLE |
666                                 COH901318_CX_CTRL_HSP_ENABLE |
667                                 COH901318_CX_CTRL_HSS_DISABLE |
668                                 COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
669                                 COH901318_CX_CTRL_PRDD_DEST,
670                 .param.ctrl_lli_last = 0 |
671                                 COH901318_CX_CTRL_TC_ENABLE |
672                                 COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
673                                 COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
674                                 COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
675                                 COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
676                                 COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
677                                 COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
678                                 COH901318_CX_CTRL_TCP_DISABLE |
679                                 COH901318_CX_CTRL_TC_IRQ_ENABLE |
680                                 COH901318_CX_CTRL_HSP_ENABLE |
681                                 COH901318_CX_CTRL_HSS_DISABLE |
682                                 COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
683                                 COH901318_CX_CTRL_PRDD_DEST,
684         },
685         {
686                 .number = U300_DMA_MSL_RX_5,
687                 .name = "MSL RX 5",
688                 .priority_high = 0,
689                 .param.config = COH901318_CX_CFG_CH_DISABLE |
690                                 COH901318_CX_CFG_LCR_DISABLE |
691                                 COH901318_CX_CFG_TC_IRQ_ENABLE |
692                                 COH901318_CX_CFG_BE_IRQ_ENABLE,
693                 .param.ctrl_lli_chained = 0 |
694                                 COH901318_CX_CTRL_TC_ENABLE |
695                                 COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
696                                 COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
697                                 COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
698                                 COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
699                                 COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
700                                 COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
701                                 COH901318_CX_CTRL_TCP_DISABLE |
702                                 COH901318_CX_CTRL_TC_IRQ_DISABLE |
703                                 COH901318_CX_CTRL_HSP_ENABLE |
704                                 COH901318_CX_CTRL_HSS_DISABLE |
705                                 COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
706                                 COH901318_CX_CTRL_PRDD_DEST,
707                 .param.ctrl_lli = 0 |
708                                 COH901318_CX_CTRL_TC_ENABLE |
709                                 COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
710                                 COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
711                                 COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
712                                 COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
713                                 COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
714                                 COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
715                                 COH901318_CX_CTRL_TCP_DISABLE |
716                                 COH901318_CX_CTRL_TC_IRQ_ENABLE |
717                                 COH901318_CX_CTRL_HSP_ENABLE |
718                                 COH901318_CX_CTRL_HSS_DISABLE |
719                                 COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
720                                 COH901318_CX_CTRL_PRDD_DEST,
721                 .param.ctrl_lli_last = 0 |
722                                 COH901318_CX_CTRL_TC_ENABLE |
723                                 COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
724                                 COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
725                                 COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
726                                 COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
727                                 COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
728                                 COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
729                                 COH901318_CX_CTRL_TCP_DISABLE |
730                                 COH901318_CX_CTRL_TC_IRQ_ENABLE |
731                                 COH901318_CX_CTRL_HSP_ENABLE |
732                                 COH901318_CX_CTRL_HSS_DISABLE |
733                                 COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
734                                 COH901318_CX_CTRL_PRDD_DEST,
735         },
736         {
737                 .number = U300_DMA_MSL_RX_6,
738                 .name = "MSL RX 6",
739                 .priority_high = 0,
740         },
741         /*
742          * Don't set up device address, burst count or size of src
743          * or dst bus for this peripheral - handled by PrimeCell
744          * DMA extension.
745          */
746         {
747                 .number = U300_DMA_MMCSD_RX_TX,
748                 .name = "MMCSD RX TX",
749                 .priority_high = 0,
750                 .param.config = COH901318_CX_CFG_CH_DISABLE |
751                                 COH901318_CX_CFG_LCR_DISABLE |
752                                 COH901318_CX_CFG_TC_IRQ_ENABLE |
753                                 COH901318_CX_CFG_BE_IRQ_ENABLE,
754                 .param.ctrl_lli_chained = 0 |
755                                 COH901318_CX_CTRL_TC_ENABLE |
756                                 COH901318_CX_CTRL_MASTER_MODE_M1RW |
757                                 COH901318_CX_CTRL_TCP_ENABLE |
758                                 COH901318_CX_CTRL_TC_IRQ_DISABLE |
759                                 COH901318_CX_CTRL_HSP_ENABLE |
760                                 COH901318_CX_CTRL_HSS_DISABLE |
761                                 COH901318_CX_CTRL_DDMA_LEGACY,
762                 .param.ctrl_lli = 0 |
763                                 COH901318_CX_CTRL_TC_ENABLE |
764                                 COH901318_CX_CTRL_MASTER_MODE_M1RW |
765                                 COH901318_CX_CTRL_TCP_ENABLE |
766                                 COH901318_CX_CTRL_TC_IRQ_DISABLE |
767                                 COH901318_CX_CTRL_HSP_ENABLE |
768                                 COH901318_CX_CTRL_HSS_DISABLE |
769                                 COH901318_CX_CTRL_DDMA_LEGACY,
770                 .param.ctrl_lli_last = 0 |
771                                 COH901318_CX_CTRL_TC_ENABLE |
772                                 COH901318_CX_CTRL_MASTER_MODE_M1RW |
773                                 COH901318_CX_CTRL_TCP_DISABLE |
774                                 COH901318_CX_CTRL_TC_IRQ_ENABLE |
775                                 COH901318_CX_CTRL_HSP_ENABLE |
776                                 COH901318_CX_CTRL_HSS_DISABLE |
777                                 COH901318_CX_CTRL_DDMA_LEGACY,
778
779         },
780         {
781                 .number = U300_DMA_MSPRO_TX,
782                 .name = "MSPRO TX",
783                 .priority_high = 0,
784         },
785         {
786                 .number = U300_DMA_MSPRO_RX,
787                 .name = "MSPRO RX",
788                 .priority_high = 0,
789         },
790         /*
791          * Don't set up device address, burst count or size of src
792          * or dst bus for this peripheral - handled by PrimeCell
793          * DMA extension.
794          */
795         {
796                 .number = U300_DMA_UART0_TX,
797                 .name = "UART0 TX",
798                 .priority_high = 0,
799                 .param.config = COH901318_CX_CFG_CH_DISABLE |
800                                 COH901318_CX_CFG_LCR_DISABLE |
801                                 COH901318_CX_CFG_TC_IRQ_ENABLE |
802                                 COH901318_CX_CFG_BE_IRQ_ENABLE,
803                 .param.ctrl_lli_chained = 0 |
804                                 COH901318_CX_CTRL_TC_ENABLE |
805                                 COH901318_CX_CTRL_MASTER_MODE_M1RW |
806                                 COH901318_CX_CTRL_TCP_ENABLE |
807                                 COH901318_CX_CTRL_TC_IRQ_DISABLE |
808                                 COH901318_CX_CTRL_HSP_ENABLE |
809                                 COH901318_CX_CTRL_HSS_DISABLE |
810                                 COH901318_CX_CTRL_DDMA_LEGACY,
811                 .param.ctrl_lli = 0 |
812                                 COH901318_CX_CTRL_TC_ENABLE |
813                                 COH901318_CX_CTRL_MASTER_MODE_M1RW |
814                                 COH901318_CX_CTRL_TCP_ENABLE |
815                                 COH901318_CX_CTRL_TC_IRQ_ENABLE |
816                                 COH901318_CX_CTRL_HSP_ENABLE |
817                                 COH901318_CX_CTRL_HSS_DISABLE |
818                                 COH901318_CX_CTRL_DDMA_LEGACY,
819                 .param.ctrl_lli_last = 0 |
820                                 COH901318_CX_CTRL_TC_ENABLE |
821                                 COH901318_CX_CTRL_MASTER_MODE_M1RW |
822                                 COH901318_CX_CTRL_TCP_ENABLE |
823                                 COH901318_CX_CTRL_TC_IRQ_ENABLE |
824                                 COH901318_CX_CTRL_HSP_ENABLE |
825                                 COH901318_CX_CTRL_HSS_DISABLE |
826                                 COH901318_CX_CTRL_DDMA_LEGACY,
827         },
828         {
829                 .number = U300_DMA_UART0_RX,
830                 .name = "UART0 RX",
831                 .priority_high = 0,
832                 .param.config = COH901318_CX_CFG_CH_DISABLE |
833                                 COH901318_CX_CFG_LCR_DISABLE |
834                                 COH901318_CX_CFG_TC_IRQ_ENABLE |
835                                 COH901318_CX_CFG_BE_IRQ_ENABLE,
836                 .param.ctrl_lli_chained = 0 |
837                                 COH901318_CX_CTRL_TC_ENABLE |
838                                 COH901318_CX_CTRL_MASTER_MODE_M1RW |
839                                 COH901318_CX_CTRL_TCP_ENABLE |
840                                 COH901318_CX_CTRL_TC_IRQ_DISABLE |
841                                 COH901318_CX_CTRL_HSP_ENABLE |
842                                 COH901318_CX_CTRL_HSS_DISABLE |
843                                 COH901318_CX_CTRL_DDMA_LEGACY,
844                 .param.ctrl_lli = 0 |
845                                 COH901318_CX_CTRL_TC_ENABLE |
846                                 COH901318_CX_CTRL_MASTER_MODE_M1RW |
847                                 COH901318_CX_CTRL_TCP_ENABLE |
848                                 COH901318_CX_CTRL_TC_IRQ_ENABLE |
849                                 COH901318_CX_CTRL_HSP_ENABLE |
850                                 COH901318_CX_CTRL_HSS_DISABLE |
851                                 COH901318_CX_CTRL_DDMA_LEGACY,
852                 .param.ctrl_lli_last = 0 |
853                                 COH901318_CX_CTRL_TC_ENABLE |
854                                 COH901318_CX_CTRL_MASTER_MODE_M1RW |
855                                 COH901318_CX_CTRL_TCP_ENABLE |
856                                 COH901318_CX_CTRL_TC_IRQ_ENABLE |
857                                 COH901318_CX_CTRL_HSP_ENABLE |
858                                 COH901318_CX_CTRL_HSS_DISABLE |
859                                 COH901318_CX_CTRL_DDMA_LEGACY,
860         },
861         {
862                 .number = U300_DMA_APEX_TX,
863                 .name = "APEX TX",
864                 .priority_high = 0,
865         },
866         {
867                 .number = U300_DMA_APEX_RX,
868                 .name = "APEX RX",
869                 .priority_high = 0,
870         },
871         {
872                 .number = U300_DMA_PCM_I2S0_TX,
873                 .name = "PCM I2S0 TX",
874                 .priority_high = 1,
875                 .param.config = COH901318_CX_CFG_CH_DISABLE |
876                                 COH901318_CX_CFG_LCR_DISABLE |
877                                 COH901318_CX_CFG_TC_IRQ_ENABLE |
878                                 COH901318_CX_CFG_BE_IRQ_ENABLE,
879                 .param.ctrl_lli_chained = 0 |
880                                 COH901318_CX_CTRL_TC_ENABLE |
881                                 COH901318_CX_CTRL_BURST_COUNT_16_BYTES |
882                                 COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
883                                 COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
884                                 COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
885                                 COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
886                                 COH901318_CX_CTRL_MASTER_MODE_M1RW |
887                                 COH901318_CX_CTRL_TCP_DISABLE |
888                                 COH901318_CX_CTRL_TC_IRQ_DISABLE |
889                                 COH901318_CX_CTRL_HSP_ENABLE |
890                                 COH901318_CX_CTRL_HSS_DISABLE |
891                                 COH901318_CX_CTRL_DDMA_LEGACY |
892                                 COH901318_CX_CTRL_PRDD_SOURCE,
893                 .param.ctrl_lli = 0 |
894                                 COH901318_CX_CTRL_TC_ENABLE |
895                                 COH901318_CX_CTRL_BURST_COUNT_16_BYTES |
896                                 COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
897                                 COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
898                                 COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
899                                 COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
900                                 COH901318_CX_CTRL_MASTER_MODE_M1RW |
901                                 COH901318_CX_CTRL_TCP_ENABLE |
902                                 COH901318_CX_CTRL_TC_IRQ_DISABLE |
903                                 COH901318_CX_CTRL_HSP_ENABLE |
904                                 COH901318_CX_CTRL_HSS_DISABLE |
905                                 COH901318_CX_CTRL_DDMA_LEGACY |
906                                 COH901318_CX_CTRL_PRDD_SOURCE,
907                 .param.ctrl_lli_last = 0 |
908                                 COH901318_CX_CTRL_TC_ENABLE |
909                                 COH901318_CX_CTRL_BURST_COUNT_16_BYTES |
910                                 COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
911                                 COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
912                                 COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
913                                 COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
914                                 COH901318_CX_CTRL_MASTER_MODE_M1RW |
915                                 COH901318_CX_CTRL_TCP_ENABLE |
916                                 COH901318_CX_CTRL_TC_IRQ_DISABLE |
917                                 COH901318_CX_CTRL_HSP_ENABLE |
918                                 COH901318_CX_CTRL_HSS_DISABLE |
919                                 COH901318_CX_CTRL_DDMA_LEGACY |
920                                 COH901318_CX_CTRL_PRDD_SOURCE,
921         },
922         {
923                 .number = U300_DMA_PCM_I2S0_RX,
924                 .name = "PCM I2S0 RX",
925                 .priority_high = 1,
926                 .param.config = COH901318_CX_CFG_CH_DISABLE |
927                                 COH901318_CX_CFG_LCR_DISABLE |
928                                 COH901318_CX_CFG_TC_IRQ_ENABLE |
929                                 COH901318_CX_CFG_BE_IRQ_ENABLE,
930                 .param.ctrl_lli_chained = 0 |
931                                 COH901318_CX_CTRL_TC_ENABLE |
932                                 COH901318_CX_CTRL_BURST_COUNT_16_BYTES |
933                                 COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
934                                 COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
935                                 COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
936                                 COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
937                                 COH901318_CX_CTRL_MASTER_MODE_M1RW |
938                                 COH901318_CX_CTRL_TCP_DISABLE |
939                                 COH901318_CX_CTRL_TC_IRQ_DISABLE |
940                                 COH901318_CX_CTRL_HSP_ENABLE |
941                                 COH901318_CX_CTRL_HSS_DISABLE |
942                                 COH901318_CX_CTRL_DDMA_LEGACY |
943                                 COH901318_CX_CTRL_PRDD_DEST,
944                 .param.ctrl_lli = 0 |
945                                 COH901318_CX_CTRL_TC_ENABLE |
946                                 COH901318_CX_CTRL_BURST_COUNT_16_BYTES |
947                                 COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
948                                 COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
949                                 COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
950                                 COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
951                                 COH901318_CX_CTRL_MASTER_MODE_M1RW |
952                                 COH901318_CX_CTRL_TCP_ENABLE |
953                                 COH901318_CX_CTRL_TC_IRQ_DISABLE |
954                                 COH901318_CX_CTRL_HSP_ENABLE |
955                                 COH901318_CX_CTRL_HSS_DISABLE |
956                                 COH901318_CX_CTRL_DDMA_LEGACY |
957                                 COH901318_CX_CTRL_PRDD_DEST,
958                 .param.ctrl_lli_last = 0 |
959                                 COH901318_CX_CTRL_TC_ENABLE |
960                                 COH901318_CX_CTRL_BURST_COUNT_16_BYTES |
961                                 COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
962                                 COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
963                                 COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
964                                 COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
965                                 COH901318_CX_CTRL_MASTER_MODE_M1RW |
966                                 COH901318_CX_CTRL_TCP_ENABLE |
967                                 COH901318_CX_CTRL_TC_IRQ_ENABLE |
968                                 COH901318_CX_CTRL_HSP_ENABLE |
969                                 COH901318_CX_CTRL_HSS_DISABLE |
970                                 COH901318_CX_CTRL_DDMA_LEGACY |
971                                 COH901318_CX_CTRL_PRDD_DEST,
972         },
973         {
974                 .number = U300_DMA_PCM_I2S1_TX,
975                 .name = "PCM I2S1 TX",
976                 .priority_high = 1,
977                 .param.config = COH901318_CX_CFG_CH_DISABLE |
978                                 COH901318_CX_CFG_LCR_DISABLE |
979                                 COH901318_CX_CFG_TC_IRQ_ENABLE |
980                                 COH901318_CX_CFG_BE_IRQ_ENABLE,
981                 .param.ctrl_lli_chained = 0 |
982                                 COH901318_CX_CTRL_TC_ENABLE |
983                                 COH901318_CX_CTRL_BURST_COUNT_16_BYTES |
984                                 COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
985                                 COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
986                                 COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
987                                 COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
988                                 COH901318_CX_CTRL_MASTER_MODE_M1RW |
989                                 COH901318_CX_CTRL_TCP_DISABLE |
990                                 COH901318_CX_CTRL_TC_IRQ_DISABLE |
991                                 COH901318_CX_CTRL_HSP_ENABLE |
992                                 COH901318_CX_CTRL_HSS_DISABLE |
993                                 COH901318_CX_CTRL_DDMA_LEGACY |
994                                 COH901318_CX_CTRL_PRDD_SOURCE,
995                 .param.ctrl_lli = 0 |
996                                 COH901318_CX_CTRL_TC_ENABLE |
997                                 COH901318_CX_CTRL_BURST_COUNT_16_BYTES |
998                                 COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
999                                 COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
1000                                 COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
1001                                 COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
1002                                 COH901318_CX_CTRL_MASTER_MODE_M1RW |
1003                                 COH901318_CX_CTRL_TCP_ENABLE |
1004                                 COH901318_CX_CTRL_TC_IRQ_DISABLE |
1005                                 COH901318_CX_CTRL_HSP_ENABLE |
1006                                 COH901318_CX_CTRL_HSS_DISABLE |
1007                                 COH901318_CX_CTRL_DDMA_LEGACY |
1008                                 COH901318_CX_CTRL_PRDD_SOURCE,
1009                 .param.ctrl_lli_last = 0 |
1010                                 COH901318_CX_CTRL_TC_ENABLE |
1011                                 COH901318_CX_CTRL_BURST_COUNT_16_BYTES |
1012                                 COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
1013                                 COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
1014                                 COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
1015                                 COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
1016                                 COH901318_CX_CTRL_MASTER_MODE_M1RW |
1017                                 COH901318_CX_CTRL_TCP_ENABLE |
1018                                 COH901318_CX_CTRL_TC_IRQ_ENABLE |
1019                                 COH901318_CX_CTRL_HSP_ENABLE |
1020                                 COH901318_CX_CTRL_HSS_DISABLE |
1021                                 COH901318_CX_CTRL_DDMA_LEGACY |
1022                                 COH901318_CX_CTRL_PRDD_SOURCE,
1023         },
1024         {
1025                 .number = U300_DMA_PCM_I2S1_RX,
1026                 .name = "PCM I2S1 RX",
1027                 .priority_high = 1,
1028                 .param.config = COH901318_CX_CFG_CH_DISABLE |
1029                                 COH901318_CX_CFG_LCR_DISABLE |
1030                                 COH901318_CX_CFG_TC_IRQ_ENABLE |
1031                                 COH901318_CX_CFG_BE_IRQ_ENABLE,
1032                 .param.ctrl_lli_chained = 0 |
1033                                 COH901318_CX_CTRL_TC_ENABLE |
1034                                 COH901318_CX_CTRL_BURST_COUNT_16_BYTES |
1035                                 COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
1036                                 COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
1037                                 COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
1038                                 COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
1039                                 COH901318_CX_CTRL_MASTER_MODE_M1RW |
1040                                 COH901318_CX_CTRL_TCP_DISABLE |
1041                                 COH901318_CX_CTRL_TC_IRQ_DISABLE |
1042                                 COH901318_CX_CTRL_HSP_ENABLE |
1043                                 COH901318_CX_CTRL_HSS_DISABLE |
1044                                 COH901318_CX_CTRL_DDMA_LEGACY |
1045                                 COH901318_CX_CTRL_PRDD_DEST,
1046                 .param.ctrl_lli = 0 |
1047                                 COH901318_CX_CTRL_TC_ENABLE |
1048                                 COH901318_CX_CTRL_BURST_COUNT_16_BYTES |
1049                                 COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
1050                                 COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
1051                                 COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
1052                                 COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
1053                                 COH901318_CX_CTRL_MASTER_MODE_M1RW |
1054                                 COH901318_CX_CTRL_TCP_ENABLE |
1055                                 COH901318_CX_CTRL_TC_IRQ_DISABLE |
1056                                 COH901318_CX_CTRL_HSP_ENABLE |
1057                                 COH901318_CX_CTRL_HSS_DISABLE |
1058                                 COH901318_CX_CTRL_DDMA_LEGACY |
1059                                 COH901318_CX_CTRL_PRDD_DEST,
1060                 .param.ctrl_lli_last = 0 |
1061                                 COH901318_CX_CTRL_TC_ENABLE |
1062                                 COH901318_CX_CTRL_BURST_COUNT_16_BYTES |
1063                                 COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
1064                                 COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
1065                                 COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
1066                                 COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
1067                                 COH901318_CX_CTRL_MASTER_MODE_M1RW |
1068                                 COH901318_CX_CTRL_TCP_ENABLE |
1069                                 COH901318_CX_CTRL_TC_IRQ_ENABLE |
1070                                 COH901318_CX_CTRL_HSP_ENABLE |
1071                                 COH901318_CX_CTRL_HSS_DISABLE |
1072                                 COH901318_CX_CTRL_DDMA_LEGACY |
1073                                 COH901318_CX_CTRL_PRDD_DEST,
1074         },
1075         {
1076                 .number = U300_DMA_XGAM_CDI,
1077                 .name = "XGAM CDI",
1078                 .priority_high = 0,
1079         },
1080         {
1081                 .number = U300_DMA_XGAM_PDI,
1082                 .name = "XGAM PDI",
1083                 .priority_high = 0,
1084         },
1085         /*
1086          * Don't set up device address, burst count or size of src
1087          * or dst bus for this peripheral - handled by PrimeCell
1088          * DMA extension.
1089          */
1090         {
1091                 .number = U300_DMA_SPI_TX,
1092                 .name = "SPI TX",
1093                 .priority_high = 0,
1094                 .param.config = COH901318_CX_CFG_CH_DISABLE |
1095                                 COH901318_CX_CFG_LCR_DISABLE |
1096                                 COH901318_CX_CFG_TC_IRQ_ENABLE |
1097                                 COH901318_CX_CFG_BE_IRQ_ENABLE,
1098                 .param.ctrl_lli_chained = 0 |
1099                                 COH901318_CX_CTRL_TC_ENABLE |
1100                                 COH901318_CX_CTRL_MASTER_MODE_M1RW |
1101                                 COH901318_CX_CTRL_TCP_DISABLE |
1102                                 COH901318_CX_CTRL_TC_IRQ_DISABLE |
1103                                 COH901318_CX_CTRL_HSP_ENABLE |
1104                                 COH901318_CX_CTRL_HSS_DISABLE |
1105                                 COH901318_CX_CTRL_DDMA_LEGACY,
1106                 .param.ctrl_lli = 0 |
1107                                 COH901318_CX_CTRL_TC_ENABLE |
1108                                 COH901318_CX_CTRL_MASTER_MODE_M1RW |
1109                                 COH901318_CX_CTRL_TCP_DISABLE |
1110                                 COH901318_CX_CTRL_TC_IRQ_ENABLE |
1111                                 COH901318_CX_CTRL_HSP_ENABLE |
1112                                 COH901318_CX_CTRL_HSS_DISABLE |
1113                                 COH901318_CX_CTRL_DDMA_LEGACY,
1114                 .param.ctrl_lli_last = 0 |
1115                                 COH901318_CX_CTRL_TC_ENABLE |
1116                                 COH901318_CX_CTRL_MASTER_MODE_M1RW |
1117                                 COH901318_CX_CTRL_TCP_DISABLE |
1118                                 COH901318_CX_CTRL_TC_IRQ_ENABLE |
1119                                 COH901318_CX_CTRL_HSP_ENABLE |
1120                                 COH901318_CX_CTRL_HSS_DISABLE |
1121                                 COH901318_CX_CTRL_DDMA_LEGACY,
1122         },
1123         {
1124                 .number = U300_DMA_SPI_RX,
1125                 .name = "SPI RX",
1126                 .priority_high = 0,
1127                 .param.config = COH901318_CX_CFG_CH_DISABLE |
1128                                 COH901318_CX_CFG_LCR_DISABLE |
1129                                 COH901318_CX_CFG_TC_IRQ_ENABLE |
1130                                 COH901318_CX_CFG_BE_IRQ_ENABLE,
1131                 .param.ctrl_lli_chained = 0 |
1132                                 COH901318_CX_CTRL_TC_ENABLE |
1133                                 COH901318_CX_CTRL_MASTER_MODE_M1RW |
1134                                 COH901318_CX_CTRL_TCP_DISABLE |
1135                                 COH901318_CX_CTRL_TC_IRQ_DISABLE |
1136                                 COH901318_CX_CTRL_HSP_ENABLE |
1137                                 COH901318_CX_CTRL_HSS_DISABLE |
1138                                 COH901318_CX_CTRL_DDMA_LEGACY,
1139                 .param.ctrl_lli = 0 |
1140                                 COH901318_CX_CTRL_TC_ENABLE |
1141                                 COH901318_CX_CTRL_MASTER_MODE_M1RW |
1142                                 COH901318_CX_CTRL_TCP_DISABLE |
1143                                 COH901318_CX_CTRL_TC_IRQ_ENABLE |
1144                                 COH901318_CX_CTRL_HSP_ENABLE |
1145                                 COH901318_CX_CTRL_HSS_DISABLE |
1146                                 COH901318_CX_CTRL_DDMA_LEGACY,
1147                 .param.ctrl_lli_last = 0 |
1148                                 COH901318_CX_CTRL_TC_ENABLE |
1149                                 COH901318_CX_CTRL_MASTER_MODE_M1RW |
1150                                 COH901318_CX_CTRL_TCP_DISABLE |
1151                                 COH901318_CX_CTRL_TC_IRQ_ENABLE |
1152                                 COH901318_CX_CTRL_HSP_ENABLE |
1153                                 COH901318_CX_CTRL_HSS_DISABLE |
1154                                 COH901318_CX_CTRL_DDMA_LEGACY,
1155
1156         },
1157         {
1158                 .number = U300_DMA_GENERAL_PURPOSE_0,
1159                 .name = "GENERAL 00",
1160                 .priority_high = 0,
1161
1162                 .param.config = flags_memcpy_config,
1163                 .param.ctrl_lli_chained = flags_memcpy_lli_chained,
1164                 .param.ctrl_lli = flags_memcpy_lli,
1165                 .param.ctrl_lli_last = flags_memcpy_lli_last,
1166         },
1167         {
1168                 .number = U300_DMA_GENERAL_PURPOSE_1,
1169                 .name = "GENERAL 01",
1170                 .priority_high = 0,
1171
1172                 .param.config = flags_memcpy_config,
1173                 .param.ctrl_lli_chained = flags_memcpy_lli_chained,
1174                 .param.ctrl_lli = flags_memcpy_lli,
1175                 .param.ctrl_lli_last = flags_memcpy_lli_last,
1176         },
1177         {
1178                 .number = U300_DMA_GENERAL_PURPOSE_2,
1179                 .name = "GENERAL 02",
1180                 .priority_high = 0,
1181
1182                 .param.config = flags_memcpy_config,
1183                 .param.ctrl_lli_chained = flags_memcpy_lli_chained,
1184                 .param.ctrl_lli = flags_memcpy_lli,
1185                 .param.ctrl_lli_last = flags_memcpy_lli_last,
1186         },
1187         {
1188                 .number = U300_DMA_GENERAL_PURPOSE_3,
1189                 .name = "GENERAL 03",
1190                 .priority_high = 0,
1191
1192                 .param.config = flags_memcpy_config,
1193                 .param.ctrl_lli_chained = flags_memcpy_lli_chained,
1194                 .param.ctrl_lli = flags_memcpy_lli,
1195                 .param.ctrl_lli_last = flags_memcpy_lli_last,
1196         },
1197         {
1198                 .number = U300_DMA_GENERAL_PURPOSE_4,
1199                 .name = "GENERAL 04",
1200                 .priority_high = 0,
1201
1202                 .param.config = flags_memcpy_config,
1203                 .param.ctrl_lli_chained = flags_memcpy_lli_chained,
1204                 .param.ctrl_lli = flags_memcpy_lli,
1205                 .param.ctrl_lli_last = flags_memcpy_lli_last,
1206         },
1207         {
1208                 .number = U300_DMA_GENERAL_PURPOSE_5,
1209                 .name = "GENERAL 05",
1210                 .priority_high = 0,
1211
1212                 .param.config = flags_memcpy_config,
1213                 .param.ctrl_lli_chained = flags_memcpy_lli_chained,
1214                 .param.ctrl_lli = flags_memcpy_lli,
1215                 .param.ctrl_lli_last = flags_memcpy_lli_last,
1216         },
1217         {
1218                 .number = U300_DMA_GENERAL_PURPOSE_6,
1219                 .name = "GENERAL 06",
1220                 .priority_high = 0,
1221
1222                 .param.config = flags_memcpy_config,
1223                 .param.ctrl_lli_chained = flags_memcpy_lli_chained,
1224                 .param.ctrl_lli = flags_memcpy_lli,
1225                 .param.ctrl_lli_last = flags_memcpy_lli_last,
1226         },
1227         {
1228                 .number = U300_DMA_GENERAL_PURPOSE_7,
1229                 .name = "GENERAL 07",
1230                 .priority_high = 0,
1231
1232                 .param.config = flags_memcpy_config,
1233                 .param.ctrl_lli_chained = flags_memcpy_lli_chained,
1234                 .param.ctrl_lli = flags_memcpy_lli,
1235                 .param.ctrl_lli_last = flags_memcpy_lli_last,
1236         },
1237         {
1238                 .number = U300_DMA_GENERAL_PURPOSE_8,
1239                 .name = "GENERAL 08",
1240                 .priority_high = 0,
1241
1242                 .param.config = flags_memcpy_config,
1243                 .param.ctrl_lli_chained = flags_memcpy_lli_chained,
1244                 .param.ctrl_lli = flags_memcpy_lli,
1245                 .param.ctrl_lli_last = flags_memcpy_lli_last,
1246         },
1247         {
1248                 .number = U300_DMA_UART1_TX,
1249                 .name = "UART1 TX",
1250                 .priority_high = 0,
1251         },
1252         {
1253                 .number = U300_DMA_UART1_RX,
1254                 .name = "UART1 RX",
1255                 .priority_high = 0,
1256         }
1257 };
1258
1259 #define COHC_2_DEV(cohc) (&cohc->chan.dev->device)
1260
1261 #ifdef VERBOSE_DEBUG
1262 #define COH_DBG(x) ({ if (1) x; 0; })
1263 #else
1264 #define COH_DBG(x) ({ if (0) x; 0; })
1265 #endif
1266
1267 struct coh901318_desc {
1268         struct dma_async_tx_descriptor desc;
1269         struct list_head node;
1270         struct scatterlist *sg;
1271         unsigned int sg_len;
1272         struct coh901318_lli *lli;
1273         enum dma_transfer_direction dir;
1274         unsigned long flags;
1275         u32 head_config;
1276         u32 head_ctrl;
1277 };
1278
1279 struct coh901318_base {
1280         struct device *dev;
1281         void __iomem *virtbase;
1282         struct coh901318_pool pool;
1283         struct powersave pm;
1284         struct dma_device dma_slave;
1285         struct dma_device dma_memcpy;
1286         struct coh901318_chan *chans;
1287 };
1288
1289 struct coh901318_chan {
1290         spinlock_t lock;
1291         int allocated;
1292         int id;
1293         int stopped;
1294
1295         struct work_struct free_work;
1296         struct dma_chan chan;
1297
1298         struct tasklet_struct tasklet;
1299
1300         struct list_head active;
1301         struct list_head queue;
1302         struct list_head free;
1303
1304         unsigned long nbr_active_done;
1305         unsigned long busy;
1306
1307         u32 addr;
1308         u32 ctrl;
1309
1310         struct coh901318_base *base;
1311 };
1312
1313 static void coh901318_list_print(struct coh901318_chan *cohc,
1314                                  struct coh901318_lli *lli)
1315 {
1316         struct coh901318_lli *l = lli;
1317         int i = 0;
1318
1319         while (l) {
1320                 dev_vdbg(COHC_2_DEV(cohc), "i %d, lli %p, ctrl 0x%x, src 0x%x"
1321                          ", dst 0x%x, link 0x%x virt_link_addr 0x%p\n",
1322                          i, l, l->control, l->src_addr, l->dst_addr,
1323                          l->link_addr, l->virt_link_addr);
1324                 i++;
1325                 l = l->virt_link_addr;
1326         }
1327 }
1328
1329 #ifdef CONFIG_DEBUG_FS
1330
1331 #define COH901318_DEBUGFS_ASSIGN(x, y) (x = y)
1332
1333 static struct coh901318_base *debugfs_dma_base;
1334 static struct dentry *dma_dentry;
1335
1336 static int coh901318_debugfs_read(struct file *file, char __user *buf,
1337                                   size_t count, loff_t *f_pos)
1338 {
1339         u64 started_channels = debugfs_dma_base->pm.started_channels;
1340         int pool_count = debugfs_dma_base->pool.debugfs_pool_counter;
1341         int i;
1342         int ret = 0;
1343         char *dev_buf;
1344         char *tmp;
1345         int dev_size;
1346
1347         dev_buf = kmalloc(4*1024, GFP_KERNEL);
1348         if (dev_buf == NULL)
1349                 goto err_kmalloc;
1350         tmp = dev_buf;
1351
1352         tmp += sprintf(tmp, "DMA -- enabled dma channels\n");
1353
1354         for (i = 0; i < U300_DMA_CHANNELS; i++)
1355                 if (started_channels & (1 << i))
1356                         tmp += sprintf(tmp, "channel %d\n", i);
1357
1358         tmp += sprintf(tmp, "Pool alloc nbr %d\n", pool_count);
1359         dev_size = tmp  - dev_buf;
1360
1361         /* No more to read if offset != 0 */
1362         if (*f_pos > dev_size)
1363                 goto out;
1364
1365         if (count > dev_size - *f_pos)
1366                 count = dev_size - *f_pos;
1367
1368         if (copy_to_user(buf, dev_buf + *f_pos, count))
1369                 ret = -EINVAL;
1370         ret = count;
1371         *f_pos += count;
1372
1373  out:
1374         kfree(dev_buf);
1375         return ret;
1376
1377  err_kmalloc:
1378         return 0;
1379 }
1380
1381 static const struct file_operations coh901318_debugfs_status_operations = {
1382         .owner          = THIS_MODULE,
1383         .open           = simple_open,
1384         .read           = coh901318_debugfs_read,
1385         .llseek         = default_llseek,
1386 };
1387
1388
1389 static int __init init_coh901318_debugfs(void)
1390 {
1391
1392         dma_dentry = debugfs_create_dir("dma", NULL);
1393
1394         (void) debugfs_create_file("status",
1395                                    S_IFREG | S_IRUGO,
1396                                    dma_dentry, NULL,
1397                                    &coh901318_debugfs_status_operations);
1398         return 0;
1399 }
1400
1401 static void __exit exit_coh901318_debugfs(void)
1402 {
1403         debugfs_remove_recursive(dma_dentry);
1404 }
1405
1406 module_init(init_coh901318_debugfs);
1407 module_exit(exit_coh901318_debugfs);
1408 #else
1409
1410 #define COH901318_DEBUGFS_ASSIGN(x, y)
1411
1412 #endif /* CONFIG_DEBUG_FS */
1413
1414 static inline struct coh901318_chan *to_coh901318_chan(struct dma_chan *chan)
1415 {
1416         return container_of(chan, struct coh901318_chan, chan);
1417 }
1418
1419 static inline const struct coh901318_params *
1420 cohc_chan_param(struct coh901318_chan *cohc)
1421 {
1422         return &chan_config[cohc->id].param;
1423 }
1424
1425 static inline const struct coh_dma_channel *
1426 cohc_chan_conf(struct coh901318_chan *cohc)
1427 {
1428         return &chan_config[cohc->id];
1429 }
1430
1431 static void enable_powersave(struct coh901318_chan *cohc)
1432 {
1433         unsigned long flags;
1434         struct powersave *pm = &cohc->base->pm;
1435
1436         spin_lock_irqsave(&pm->lock, flags);
1437
1438         pm->started_channels &= ~(1ULL << cohc->id);
1439
1440         spin_unlock_irqrestore(&pm->lock, flags);
1441 }
1442 static void disable_powersave(struct coh901318_chan *cohc)
1443 {
1444         unsigned long flags;
1445         struct powersave *pm = &cohc->base->pm;
1446
1447         spin_lock_irqsave(&pm->lock, flags);
1448
1449         pm->started_channels |= (1ULL << cohc->id);
1450
1451         spin_unlock_irqrestore(&pm->lock, flags);
1452 }
1453
1454 static inline int coh901318_set_ctrl(struct coh901318_chan *cohc, u32 control)
1455 {
1456         int channel = cohc->id;
1457         void __iomem *virtbase = cohc->base->virtbase;
1458
1459         writel(control,
1460                virtbase + COH901318_CX_CTRL +
1461                COH901318_CX_CTRL_SPACING * channel);
1462         return 0;
1463 }
1464
1465 static inline int coh901318_set_conf(struct coh901318_chan *cohc, u32 conf)
1466 {
1467         int channel = cohc->id;
1468         void __iomem *virtbase = cohc->base->virtbase;
1469
1470         writel(conf,
1471                virtbase + COH901318_CX_CFG +
1472                COH901318_CX_CFG_SPACING*channel);
1473         return 0;
1474 }
1475
1476
1477 static int coh901318_start(struct coh901318_chan *cohc)
1478 {
1479         u32 val;
1480         int channel = cohc->id;
1481         void __iomem *virtbase = cohc->base->virtbase;
1482
1483         disable_powersave(cohc);
1484
1485         val = readl(virtbase + COH901318_CX_CFG +
1486                     COH901318_CX_CFG_SPACING * channel);
1487
1488         /* Enable channel */
1489         val |= COH901318_CX_CFG_CH_ENABLE;
1490         writel(val, virtbase + COH901318_CX_CFG +
1491                COH901318_CX_CFG_SPACING * channel);
1492
1493         return 0;
1494 }
1495
1496 static int coh901318_prep_linked_list(struct coh901318_chan *cohc,
1497                                       struct coh901318_lli *lli)
1498 {
1499         int channel = cohc->id;
1500         void __iomem *virtbase = cohc->base->virtbase;
1501
1502         BUG_ON(readl(virtbase + COH901318_CX_STAT +
1503                      COH901318_CX_STAT_SPACING*channel) &
1504                COH901318_CX_STAT_ACTIVE);
1505
1506         writel(lli->src_addr,
1507                virtbase + COH901318_CX_SRC_ADDR +
1508                COH901318_CX_SRC_ADDR_SPACING * channel);
1509
1510         writel(lli->dst_addr, virtbase +
1511                COH901318_CX_DST_ADDR +
1512                COH901318_CX_DST_ADDR_SPACING * channel);
1513
1514         writel(lli->link_addr, virtbase + COH901318_CX_LNK_ADDR +
1515                COH901318_CX_LNK_ADDR_SPACING * channel);
1516
1517         writel(lli->control, virtbase + COH901318_CX_CTRL +
1518                COH901318_CX_CTRL_SPACING * channel);
1519
1520         return 0;
1521 }
1522
1523 static struct coh901318_desc *
1524 coh901318_desc_get(struct coh901318_chan *cohc)
1525 {
1526         struct coh901318_desc *desc;
1527
1528         if (list_empty(&cohc->free)) {
1529                 /* alloc new desc because we're out of used ones
1530                  * TODO: alloc a pile of descs instead of just one,
1531                  * avoid many small allocations.
1532                  */
1533                 desc = kzalloc(sizeof(struct coh901318_desc), GFP_NOWAIT);
1534                 if (desc == NULL)
1535                         goto out;
1536                 INIT_LIST_HEAD(&desc->node);
1537                 dma_async_tx_descriptor_init(&desc->desc, &cohc->chan);
1538         } else {
1539                 /* Reuse an old desc. */
1540                 desc = list_first_entry(&cohc->free,
1541                                         struct coh901318_desc,
1542                                         node);
1543                 list_del(&desc->node);
1544                 /* Initialize it a bit so it's not insane */
1545                 desc->sg = NULL;
1546                 desc->sg_len = 0;
1547                 desc->desc.callback = NULL;
1548                 desc->desc.callback_param = NULL;
1549         }
1550
1551  out:
1552         return desc;
1553 }
1554
1555 static void
1556 coh901318_desc_free(struct coh901318_chan *cohc, struct coh901318_desc *cohd)
1557 {
1558         list_add_tail(&cohd->node, &cohc->free);
1559 }
1560
1561 /* call with irq lock held */
1562 static void
1563 coh901318_desc_submit(struct coh901318_chan *cohc, struct coh901318_desc *desc)
1564 {
1565         list_add_tail(&desc->node, &cohc->active);
1566 }
1567
1568 static struct coh901318_desc *
1569 coh901318_first_active_get(struct coh901318_chan *cohc)
1570 {
1571         struct coh901318_desc *d;
1572
1573         if (list_empty(&cohc->active))
1574                 return NULL;
1575
1576         d = list_first_entry(&cohc->active,
1577                              struct coh901318_desc,
1578                              node);
1579         return d;
1580 }
1581
1582 static void
1583 coh901318_desc_remove(struct coh901318_desc *cohd)
1584 {
1585         list_del(&cohd->node);
1586 }
1587
1588 static void
1589 coh901318_desc_queue(struct coh901318_chan *cohc, struct coh901318_desc *desc)
1590 {
1591         list_add_tail(&desc->node, &cohc->queue);
1592 }
1593
1594 static struct coh901318_desc *
1595 coh901318_first_queued(struct coh901318_chan *cohc)
1596 {
1597         struct coh901318_desc *d;
1598
1599         if (list_empty(&cohc->queue))
1600                 return NULL;
1601
1602         d = list_first_entry(&cohc->queue,
1603                              struct coh901318_desc,
1604                              node);
1605         return d;
1606 }
1607
1608 static inline u32 coh901318_get_bytes_in_lli(struct coh901318_lli *in_lli)
1609 {
1610         struct coh901318_lli *lli = in_lli;
1611         u32 bytes = 0;
1612
1613         while (lli) {
1614                 bytes += lli->control & COH901318_CX_CTRL_TC_VALUE_MASK;
1615                 lli = lli->virt_link_addr;
1616         }
1617         return bytes;
1618 }
1619
1620 /*
1621  * Get the number of bytes left to transfer on this channel,
1622  * it is unwise to call this before stopping the channel for
1623  * absolute measures, but for a rough guess you can still call
1624  * it.
1625  */
1626 static u32 coh901318_get_bytes_left(struct dma_chan *chan)
1627 {
1628         struct coh901318_chan *cohc = to_coh901318_chan(chan);
1629         struct coh901318_desc *cohd;
1630         struct list_head *pos;
1631         unsigned long flags;
1632         u32 left = 0;
1633         int i = 0;
1634
1635         spin_lock_irqsave(&cohc->lock, flags);
1636
1637         /*
1638          * If there are many queued jobs, we iterate and add the
1639          * size of them all. We take a special look on the first
1640          * job though, since it is probably active.
1641          */
1642         list_for_each(pos, &cohc->active) {
1643                 /*
1644                  * The first job in the list will be working on the
1645                  * hardware. The job can be stopped but still active,
1646                  * so that the transfer counter is somewhere inside
1647                  * the buffer.
1648                  */
1649                 cohd = list_entry(pos, struct coh901318_desc, node);
1650
1651                 if (i == 0) {
1652                         struct coh901318_lli *lli;
1653                         dma_addr_t ladd;
1654
1655                         /* Read current transfer count value */
1656                         left = readl(cohc->base->virtbase +
1657                                      COH901318_CX_CTRL +
1658                                      COH901318_CX_CTRL_SPACING * cohc->id) &
1659                                 COH901318_CX_CTRL_TC_VALUE_MASK;
1660
1661                         /* See if the transfer is linked... */
1662                         ladd = readl(cohc->base->virtbase +
1663                                      COH901318_CX_LNK_ADDR +
1664                                      COH901318_CX_LNK_ADDR_SPACING *
1665                                      cohc->id) &
1666                                 ~COH901318_CX_LNK_LINK_IMMEDIATE;
1667                         /* Single transaction */
1668                         if (!ladd)
1669                                 continue;
1670
1671                         /*
1672                          * Linked transaction, follow the lli, find the
1673                          * currently processing lli, and proceed to the next
1674                          */
1675                         lli = cohd->lli;
1676                         while (lli && lli->link_addr != ladd)
1677                                 lli = lli->virt_link_addr;
1678
1679                         if (lli)
1680                                 lli = lli->virt_link_addr;
1681
1682                         /*
1683                          * Follow remaining lli links around to count the total
1684                          * number of bytes left
1685                          */
1686                         left += coh901318_get_bytes_in_lli(lli);
1687                 } else {
1688                         left += coh901318_get_bytes_in_lli(cohd->lli);
1689                 }
1690                 i++;
1691         }
1692
1693         /* Also count bytes in the queued jobs */
1694         list_for_each(pos, &cohc->queue) {
1695                 cohd = list_entry(pos, struct coh901318_desc, node);
1696                 left += coh901318_get_bytes_in_lli(cohd->lli);
1697         }
1698
1699         spin_unlock_irqrestore(&cohc->lock, flags);
1700
1701         return left;
1702 }
1703
1704 /*
1705  * Pauses a transfer without losing data. Enables power save.
1706  * Use this function in conjunction with coh901318_resume.
1707  */
1708 static void coh901318_pause(struct dma_chan *chan)
1709 {
1710         u32 val;
1711         unsigned long flags;
1712         struct coh901318_chan *cohc = to_coh901318_chan(chan);
1713         int channel = cohc->id;
1714         void __iomem *virtbase = cohc->base->virtbase;
1715
1716         spin_lock_irqsave(&cohc->lock, flags);
1717
1718         /* Disable channel in HW */
1719         val = readl(virtbase + COH901318_CX_CFG +
1720                     COH901318_CX_CFG_SPACING * channel);
1721
1722         /* Stopping infinite transfer */
1723         if ((val & COH901318_CX_CTRL_TC_ENABLE) == 0 &&
1724             (val & COH901318_CX_CFG_CH_ENABLE))
1725                 cohc->stopped = 1;
1726
1727
1728         val &= ~COH901318_CX_CFG_CH_ENABLE;
1729         /* Enable twice, HW bug work around */
1730         writel(val, virtbase + COH901318_CX_CFG +
1731                COH901318_CX_CFG_SPACING * channel);
1732         writel(val, virtbase + COH901318_CX_CFG +
1733                COH901318_CX_CFG_SPACING * channel);
1734
1735         /* Spin-wait for it to actually go inactive */
1736         while (readl(virtbase + COH901318_CX_STAT+COH901318_CX_STAT_SPACING *
1737                      channel) & COH901318_CX_STAT_ACTIVE)
1738                 cpu_relax();
1739
1740         /* Check if we stopped an active job */
1741         if ((readl(virtbase + COH901318_CX_CTRL+COH901318_CX_CTRL_SPACING *
1742                    channel) & COH901318_CX_CTRL_TC_VALUE_MASK) > 0)
1743                 cohc->stopped = 1;
1744
1745         enable_powersave(cohc);
1746
1747         spin_unlock_irqrestore(&cohc->lock, flags);
1748 }
1749
1750 /* Resumes a transfer that has been stopped via 300_dma_stop(..).
1751    Power save is handled.
1752 */
1753 static void coh901318_resume(struct dma_chan *chan)
1754 {
1755         u32 val;
1756         unsigned long flags;
1757         struct coh901318_chan *cohc = to_coh901318_chan(chan);
1758         int channel = cohc->id;
1759
1760         spin_lock_irqsave(&cohc->lock, flags);
1761
1762         disable_powersave(cohc);
1763
1764         if (cohc->stopped) {
1765                 /* Enable channel in HW */
1766                 val = readl(cohc->base->virtbase + COH901318_CX_CFG +
1767                             COH901318_CX_CFG_SPACING * channel);
1768
1769                 val |= COH901318_CX_CFG_CH_ENABLE;
1770
1771                 writel(val, cohc->base->virtbase + COH901318_CX_CFG +
1772                        COH901318_CX_CFG_SPACING*channel);
1773
1774                 cohc->stopped = 0;
1775         }
1776
1777         spin_unlock_irqrestore(&cohc->lock, flags);
1778 }
1779
1780 bool coh901318_filter_id(struct dma_chan *chan, void *chan_id)
1781 {
1782         unsigned int ch_nr = (unsigned int) chan_id;
1783
1784         if (ch_nr == to_coh901318_chan(chan)->id)
1785                 return true;
1786
1787         return false;
1788 }
1789 EXPORT_SYMBOL(coh901318_filter_id);
1790
1791 /*
1792  * DMA channel allocation
1793  */
1794 static int coh901318_config(struct coh901318_chan *cohc,
1795                             struct coh901318_params *param)
1796 {
1797         unsigned long flags;
1798         const struct coh901318_params *p;
1799         int channel = cohc->id;
1800         void __iomem *virtbase = cohc->base->virtbase;
1801
1802         spin_lock_irqsave(&cohc->lock, flags);
1803
1804         if (param)
1805                 p = param;
1806         else
1807                 p = cohc_chan_param(cohc);
1808
1809         /* Clear any pending BE or TC interrupt */
1810         if (channel < 32) {
1811                 writel(1 << channel, virtbase + COH901318_BE_INT_CLEAR1);
1812                 writel(1 << channel, virtbase + COH901318_TC_INT_CLEAR1);
1813         } else {
1814                 writel(1 << (channel - 32), virtbase +
1815                        COH901318_BE_INT_CLEAR2);
1816                 writel(1 << (channel - 32), virtbase +
1817                        COH901318_TC_INT_CLEAR2);
1818         }
1819
1820         coh901318_set_conf(cohc, p->config);
1821         coh901318_set_ctrl(cohc, p->ctrl_lli_last);
1822
1823         spin_unlock_irqrestore(&cohc->lock, flags);
1824
1825         return 0;
1826 }
1827
1828 /* must lock when calling this function
1829  * start queued jobs, if any
1830  * TODO: start all queued jobs in one go
1831  *
1832  * Returns descriptor if queued job is started otherwise NULL.
1833  * If the queue is empty NULL is returned.
1834  */
1835 static struct coh901318_desc *coh901318_queue_start(struct coh901318_chan *cohc)
1836 {
1837         struct coh901318_desc *cohd;
1838
1839         /*
1840          * start queued jobs, if any
1841          * TODO: transmit all queued jobs in one go
1842          */
1843         cohd = coh901318_first_queued(cohc);
1844
1845         if (cohd != NULL) {
1846                 /* Remove from queue */
1847                 coh901318_desc_remove(cohd);
1848                 /* initiate DMA job */
1849                 cohc->busy = 1;
1850
1851                 coh901318_desc_submit(cohc, cohd);
1852
1853                 /* Program the transaction head */
1854                 coh901318_set_conf(cohc, cohd->head_config);
1855                 coh901318_set_ctrl(cohc, cohd->head_ctrl);
1856                 coh901318_prep_linked_list(cohc, cohd->lli);
1857
1858                 /* start dma job on this channel */
1859                 coh901318_start(cohc);
1860
1861         }
1862
1863         return cohd;
1864 }
1865
1866 /*
1867  * This tasklet is called from the interrupt handler to
1868  * handle each descriptor (DMA job) that is sent to a channel.
1869  */
1870 static void dma_tasklet(unsigned long data)
1871 {
1872         struct coh901318_chan *cohc = (struct coh901318_chan *) data;
1873         struct coh901318_desc *cohd_fin;
1874         unsigned long flags;
1875         dma_async_tx_callback callback;
1876         void *callback_param;
1877
1878         dev_vdbg(COHC_2_DEV(cohc), "[%s] chan_id %d"
1879                  " nbr_active_done %ld\n", __func__,
1880                  cohc->id, cohc->nbr_active_done);
1881
1882         spin_lock_irqsave(&cohc->lock, flags);
1883
1884         /* get first active descriptor entry from list */
1885         cohd_fin = coh901318_first_active_get(cohc);
1886
1887         if (cohd_fin == NULL)
1888                 goto err;
1889
1890         /* locate callback to client */
1891         callback = cohd_fin->desc.callback;
1892         callback_param = cohd_fin->desc.callback_param;
1893
1894         /* sign this job as completed on the channel */
1895         dma_cookie_complete(&cohd_fin->desc);
1896
1897         /* release the lli allocation and remove the descriptor */
1898         coh901318_lli_free(&cohc->base->pool, &cohd_fin->lli);
1899
1900         /* return desc to free-list */
1901         coh901318_desc_remove(cohd_fin);
1902         coh901318_desc_free(cohc, cohd_fin);
1903
1904         spin_unlock_irqrestore(&cohc->lock, flags);
1905
1906         /* Call the callback when we're done */
1907         if (callback)
1908                 callback(callback_param);
1909
1910         spin_lock_irqsave(&cohc->lock, flags);
1911
1912         /*
1913          * If another interrupt fired while the tasklet was scheduling,
1914          * we don't get called twice, so we have this number of active
1915          * counter that keep track of the number of IRQs expected to
1916          * be handled for this channel. If there happen to be more than
1917          * one IRQ to be ack:ed, we simply schedule this tasklet again.
1918          */
1919         cohc->nbr_active_done--;
1920         if (cohc->nbr_active_done) {
1921                 dev_dbg(COHC_2_DEV(cohc), "scheduling tasklet again, new IRQs "
1922                         "came in while we were scheduling this tasklet\n");
1923                 if (cohc_chan_conf(cohc)->priority_high)
1924                         tasklet_hi_schedule(&cohc->tasklet);
1925                 else
1926                         tasklet_schedule(&cohc->tasklet);
1927         }
1928
1929         spin_unlock_irqrestore(&cohc->lock, flags);
1930
1931         return;
1932
1933  err:
1934         spin_unlock_irqrestore(&cohc->lock, flags);
1935         dev_err(COHC_2_DEV(cohc), "[%s] No active dma desc\n", __func__);
1936 }
1937
1938
1939 /* called from interrupt context */
1940 static void dma_tc_handle(struct coh901318_chan *cohc)
1941 {
1942         /*
1943          * If the channel is not allocated, then we shouldn't have
1944          * any TC interrupts on it.
1945          */
1946         if (!cohc->allocated) {
1947                 dev_err(COHC_2_DEV(cohc), "spurious interrupt from "
1948                         "unallocated channel\n");
1949                 return;
1950         }
1951
1952         spin_lock(&cohc->lock);
1953
1954         /*
1955          * When we reach this point, at least one queue item
1956          * should have been moved over from cohc->queue to
1957          * cohc->active and run to completion, that is why we're
1958          * getting a terminal count interrupt is it not?
1959          * If you get this BUG() the most probable cause is that
1960          * the individual nodes in the lli chain have IRQ enabled,
1961          * so check your platform config for lli chain ctrl.
1962          */
1963         BUG_ON(list_empty(&cohc->active));
1964
1965         cohc->nbr_active_done++;
1966
1967         /*
1968          * This attempt to take a job from cohc->queue, put it
1969          * into cohc->active and start it.
1970          */
1971         if (coh901318_queue_start(cohc) == NULL)
1972                 cohc->busy = 0;
1973
1974         spin_unlock(&cohc->lock);
1975
1976         /*
1977          * This tasklet will remove items from cohc->active
1978          * and thus terminates them.
1979          */
1980         if (cohc_chan_conf(cohc)->priority_high)
1981                 tasklet_hi_schedule(&cohc->tasklet);
1982         else
1983                 tasklet_schedule(&cohc->tasklet);
1984 }
1985
1986
1987 static irqreturn_t dma_irq_handler(int irq, void *dev_id)
1988 {
1989         u32 status1;
1990         u32 status2;
1991         int i;
1992         int ch;
1993         struct coh901318_base *base  = dev_id;
1994         struct coh901318_chan *cohc;
1995         void __iomem *virtbase = base->virtbase;
1996
1997         status1 = readl(virtbase + COH901318_INT_STATUS1);
1998         status2 = readl(virtbase + COH901318_INT_STATUS2);
1999
2000         if (unlikely(status1 == 0 && status2 == 0)) {
2001                 dev_warn(base->dev, "spurious DMA IRQ from no channel!\n");
2002                 return IRQ_HANDLED;
2003         }
2004
2005         /* TODO: consider handle IRQ in tasklet here to
2006          *       minimize interrupt latency */
2007
2008         /* Check the first 32 DMA channels for IRQ */
2009         while (status1) {
2010                 /* Find first bit set, return as a number. */
2011                 i = ffs(status1) - 1;
2012                 ch = i;
2013
2014                 cohc = &base->chans[ch];
2015                 spin_lock(&cohc->lock);
2016
2017                 /* Mask off this bit */
2018                 status1 &= ~(1 << i);
2019                 /* Check the individual channel bits */
2020                 if (test_bit(i, virtbase + COH901318_BE_INT_STATUS1)) {
2021                         dev_crit(COHC_2_DEV(cohc),
2022                                  "DMA bus error on channel %d!\n", ch);
2023                         BUG_ON(1);
2024                         /* Clear BE interrupt */
2025                         __set_bit(i, virtbase + COH901318_BE_INT_CLEAR1);
2026                 } else {
2027                         /* Caused by TC, really? */
2028                         if (unlikely(!test_bit(i, virtbase +
2029                                                COH901318_TC_INT_STATUS1))) {
2030                                 dev_warn(COHC_2_DEV(cohc),
2031                                          "ignoring interrupt not caused by terminal count on channel %d\n", ch);
2032                                 /* Clear TC interrupt */
2033                                 BUG_ON(1);
2034                                 __set_bit(i, virtbase + COH901318_TC_INT_CLEAR1);
2035                         } else {
2036                                 /* Enable powersave if transfer has finished */
2037                                 if (!(readl(virtbase + COH901318_CX_STAT +
2038                                             COH901318_CX_STAT_SPACING*ch) &
2039                                       COH901318_CX_STAT_ENABLED)) {
2040                                         enable_powersave(cohc);
2041                                 }
2042
2043                                 /* Must clear TC interrupt before calling
2044                                  * dma_tc_handle
2045                                  * in case tc_handle initiate a new dma job
2046                                  */
2047                                 __set_bit(i, virtbase + COH901318_TC_INT_CLEAR1);
2048
2049                                 dma_tc_handle(cohc);
2050                         }
2051                 }
2052                 spin_unlock(&cohc->lock);
2053         }
2054
2055         /* Check the remaining 32 DMA channels for IRQ */
2056         while (status2) {
2057                 /* Find first bit set, return as a number. */
2058                 i = ffs(status2) - 1;
2059                 ch = i + 32;
2060                 cohc = &base->chans[ch];
2061                 spin_lock(&cohc->lock);
2062
2063                 /* Mask off this bit */
2064                 status2 &= ~(1 << i);
2065                 /* Check the individual channel bits */
2066                 if (test_bit(i, virtbase + COH901318_BE_INT_STATUS2)) {
2067                         dev_crit(COHC_2_DEV(cohc),
2068                                  "DMA bus error on channel %d!\n", ch);
2069                         /* Clear BE interrupt */
2070                         BUG_ON(1);
2071                         __set_bit(i, virtbase + COH901318_BE_INT_CLEAR2);
2072                 } else {
2073                         /* Caused by TC, really? */
2074                         if (unlikely(!test_bit(i, virtbase +
2075                                                COH901318_TC_INT_STATUS2))) {
2076                                 dev_warn(COHC_2_DEV(cohc),
2077                                          "ignoring interrupt not caused by terminal count on channel %d\n", ch);
2078                                 /* Clear TC interrupt */
2079                                 __set_bit(i, virtbase + COH901318_TC_INT_CLEAR2);
2080                                 BUG_ON(1);
2081                         } else {
2082                                 /* Enable powersave if transfer has finished */
2083                                 if (!(readl(virtbase + COH901318_CX_STAT +
2084                                             COH901318_CX_STAT_SPACING*ch) &
2085                                       COH901318_CX_STAT_ENABLED)) {
2086                                         enable_powersave(cohc);
2087                                 }
2088                                 /* Must clear TC interrupt before calling
2089                                  * dma_tc_handle
2090                                  * in case tc_handle initiate a new dma job
2091                                  */
2092                                 __set_bit(i, virtbase + COH901318_TC_INT_CLEAR2);
2093
2094                                 dma_tc_handle(cohc);
2095                         }
2096                 }
2097                 spin_unlock(&cohc->lock);
2098         }
2099
2100         return IRQ_HANDLED;
2101 }
2102
2103 static int coh901318_alloc_chan_resources(struct dma_chan *chan)
2104 {
2105         struct coh901318_chan   *cohc = to_coh901318_chan(chan);
2106         unsigned long flags;
2107
2108         dev_vdbg(COHC_2_DEV(cohc), "[%s] DMA channel %d\n",
2109                  __func__, cohc->id);
2110
2111         if (chan->client_count > 1)
2112                 return -EBUSY;
2113
2114         spin_lock_irqsave(&cohc->lock, flags);
2115
2116         coh901318_config(cohc, NULL);
2117
2118         cohc->allocated = 1;
2119         dma_cookie_init(chan);
2120
2121         spin_unlock_irqrestore(&cohc->lock, flags);
2122
2123         return 1;
2124 }
2125
2126 static void
2127 coh901318_free_chan_resources(struct dma_chan *chan)
2128 {
2129         struct coh901318_chan   *cohc = to_coh901318_chan(chan);
2130         int channel = cohc->id;
2131         unsigned long flags;
2132
2133         spin_lock_irqsave(&cohc->lock, flags);
2134
2135         /* Disable HW */
2136         writel(0x00000000U, cohc->base->virtbase + COH901318_CX_CFG +
2137                COH901318_CX_CFG_SPACING*channel);
2138         writel(0x00000000U, cohc->base->virtbase + COH901318_CX_CTRL +
2139                COH901318_CX_CTRL_SPACING*channel);
2140
2141         cohc->allocated = 0;
2142
2143         spin_unlock_irqrestore(&cohc->lock, flags);
2144
2145         chan->device->device_control(chan, DMA_TERMINATE_ALL, 0);
2146 }
2147
2148
2149 static dma_cookie_t
2150 coh901318_tx_submit(struct dma_async_tx_descriptor *tx)
2151 {
2152         struct coh901318_desc *cohd = container_of(tx, struct coh901318_desc,
2153                                                    desc);
2154         struct coh901318_chan *cohc = to_coh901318_chan(tx->chan);
2155         unsigned long flags;
2156         dma_cookie_t cookie;
2157
2158         spin_lock_irqsave(&cohc->lock, flags);
2159         cookie = dma_cookie_assign(tx);
2160
2161         coh901318_desc_queue(cohc, cohd);
2162
2163         spin_unlock_irqrestore(&cohc->lock, flags);
2164
2165         return cookie;
2166 }
2167
2168 static struct dma_async_tx_descriptor *
2169 coh901318_prep_memcpy(struct dma_chan *chan, dma_addr_t dest, dma_addr_t src,
2170                       size_t size, unsigned long flags)
2171 {
2172         struct coh901318_lli *lli;
2173         struct coh901318_desc *cohd;
2174         unsigned long flg;
2175         struct coh901318_chan *cohc = to_coh901318_chan(chan);
2176         int lli_len;
2177         u32 ctrl_last = cohc_chan_param(cohc)->ctrl_lli_last;
2178         int ret;
2179
2180         spin_lock_irqsave(&cohc->lock, flg);
2181
2182         dev_vdbg(COHC_2_DEV(cohc),
2183                  "[%s] channel %d src 0x%x dest 0x%x size %d\n",
2184                  __func__, cohc->id, src, dest, size);
2185
2186         if (flags & DMA_PREP_INTERRUPT)
2187                 /* Trigger interrupt after last lli */
2188                 ctrl_last |= COH901318_CX_CTRL_TC_IRQ_ENABLE;
2189
2190         lli_len = size >> MAX_DMA_PACKET_SIZE_SHIFT;
2191         if ((lli_len << MAX_DMA_PACKET_SIZE_SHIFT) < size)
2192                 lli_len++;
2193
2194         lli = coh901318_lli_alloc(&cohc->base->pool, lli_len);
2195
2196         if (lli == NULL)
2197                 goto err;
2198
2199         ret = coh901318_lli_fill_memcpy(
2200                 &cohc->base->pool, lli, src, size, dest,
2201                 cohc_chan_param(cohc)->ctrl_lli_chained,
2202                 ctrl_last);
2203         if (ret)
2204                 goto err;
2205
2206         COH_DBG(coh901318_list_print(cohc, lli));
2207
2208         /* Pick a descriptor to handle this transfer */
2209         cohd = coh901318_desc_get(cohc);
2210         cohd->lli = lli;
2211         cohd->flags = flags;
2212         cohd->desc.tx_submit = coh901318_tx_submit;
2213
2214         spin_unlock_irqrestore(&cohc->lock, flg);
2215
2216         return &cohd->desc;
2217  err:
2218         spin_unlock_irqrestore(&cohc->lock, flg);
2219         return NULL;
2220 }
2221
2222 static struct dma_async_tx_descriptor *
2223 coh901318_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl,
2224                         unsigned int sg_len, enum dma_transfer_direction direction,
2225                         unsigned long flags, void *context)
2226 {
2227         struct coh901318_chan *cohc = to_coh901318_chan(chan);
2228         struct coh901318_lli *lli;
2229         struct coh901318_desc *cohd;
2230         const struct coh901318_params *params;
2231         struct scatterlist *sg;
2232         int len = 0;
2233         int size;
2234         int i;
2235         u32 ctrl_chained = cohc_chan_param(cohc)->ctrl_lli_chained;
2236         u32 ctrl = cohc_chan_param(cohc)->ctrl_lli;
2237         u32 ctrl_last = cohc_chan_param(cohc)->ctrl_lli_last;
2238         u32 config;
2239         unsigned long flg;
2240         int ret;
2241
2242         if (!sgl)
2243                 goto out;
2244         if (sg_dma_len(sgl) == 0)
2245                 goto out;
2246
2247         spin_lock_irqsave(&cohc->lock, flg);
2248
2249         dev_vdbg(COHC_2_DEV(cohc), "[%s] sg_len %d dir %d\n",
2250                  __func__, sg_len, direction);
2251
2252         if (flags & DMA_PREP_INTERRUPT)
2253                 /* Trigger interrupt after last lli */
2254                 ctrl_last |= COH901318_CX_CTRL_TC_IRQ_ENABLE;
2255
2256         params = cohc_chan_param(cohc);
2257         config = params->config;
2258         /*
2259          * Add runtime-specific control on top, make
2260          * sure the bits you set per peripheral channel are
2261          * cleared in the default config from the platform.
2262          */
2263         ctrl_chained |= cohc->ctrl;
2264         ctrl_last |= cohc->ctrl;
2265         ctrl |= cohc->ctrl;
2266
2267         if (direction == DMA_MEM_TO_DEV) {
2268                 u32 tx_flags = COH901318_CX_CTRL_PRDD_SOURCE |
2269                         COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE;
2270
2271                 config |= COH901318_CX_CFG_RM_MEMORY_TO_PRIMARY;
2272                 ctrl_chained |= tx_flags;
2273                 ctrl_last |= tx_flags;
2274                 ctrl |= tx_flags;
2275         } else if (direction == DMA_DEV_TO_MEM) {
2276                 u32 rx_flags = COH901318_CX_CTRL_PRDD_DEST |
2277                         COH901318_CX_CTRL_DST_ADDR_INC_ENABLE;
2278
2279                 config |= COH901318_CX_CFG_RM_PRIMARY_TO_MEMORY;
2280                 ctrl_chained |= rx_flags;
2281                 ctrl_last |= rx_flags;
2282                 ctrl |= rx_flags;
2283         } else
2284                 goto err_direction;
2285
2286         /* The dma only supports transmitting packages up to
2287          * MAX_DMA_PACKET_SIZE. Calculate to total number of
2288          * dma elemts required to send the entire sg list
2289          */
2290         for_each_sg(sgl, sg, sg_len, i) {
2291                 unsigned int factor;
2292                 size = sg_dma_len(sg);
2293
2294                 if (size <= MAX_DMA_PACKET_SIZE) {
2295                         len++;
2296                         continue;
2297                 }
2298
2299                 factor = size >> MAX_DMA_PACKET_SIZE_SHIFT;
2300                 if ((factor << MAX_DMA_PACKET_SIZE_SHIFT) < size)
2301                         factor++;
2302
2303                 len += factor;
2304         }
2305
2306         pr_debug("Allocate %d lli:s for this transfer\n", len);
2307         lli = coh901318_lli_alloc(&cohc->base->pool, len);
2308
2309         if (lli == NULL)
2310                 goto err_dma_alloc;
2311
2312         /* initiate allocated lli list */
2313         ret = coh901318_lli_fill_sg(&cohc->base->pool, lli, sgl, sg_len,
2314                                     cohc->addr,
2315                                     ctrl_chained,
2316                                     ctrl,
2317                                     ctrl_last,
2318                                     direction, COH901318_CX_CTRL_TC_IRQ_ENABLE);
2319         if (ret)
2320                 goto err_lli_fill;
2321
2322
2323         COH_DBG(coh901318_list_print(cohc, lli));
2324
2325         /* Pick a descriptor to handle this transfer */
2326         cohd = coh901318_desc_get(cohc);
2327         cohd->head_config = config;
2328         /*
2329          * Set the default head ctrl for the channel to the one from the
2330          * lli, things may have changed due to odd buffer alignment
2331          * etc.
2332          */
2333         cohd->head_ctrl = lli->control;
2334         cohd->dir = direction;
2335         cohd->flags = flags;
2336         cohd->desc.tx_submit = coh901318_tx_submit;
2337         cohd->lli = lli;
2338
2339         spin_unlock_irqrestore(&cohc->lock, flg);
2340
2341         return &cohd->desc;
2342  err_lli_fill:
2343  err_dma_alloc:
2344  err_direction:
2345         spin_unlock_irqrestore(&cohc->lock, flg);
2346  out:
2347         return NULL;
2348 }
2349
2350 static enum dma_status
2351 coh901318_tx_status(struct dma_chan *chan, dma_cookie_t cookie,
2352                  struct dma_tx_state *txstate)
2353 {
2354         struct coh901318_chan *cohc = to_coh901318_chan(chan);
2355         enum dma_status ret;
2356
2357         ret = dma_cookie_status(chan, cookie, txstate);
2358         if (ret == DMA_SUCCESS)
2359                 return ret;
2360
2361         dma_set_residue(txstate, coh901318_get_bytes_left(chan));
2362
2363         if (ret == DMA_IN_PROGRESS && cohc->stopped)
2364                 ret = DMA_PAUSED;
2365
2366         return ret;
2367 }
2368
2369 static void
2370 coh901318_issue_pending(struct dma_chan *chan)
2371 {
2372         struct coh901318_chan *cohc = to_coh901318_chan(chan);
2373         unsigned long flags;
2374
2375         spin_lock_irqsave(&cohc->lock, flags);
2376
2377         /*
2378          * Busy means that pending jobs are already being processed,
2379          * and then there is no point in starting the queue: the
2380          * terminal count interrupt on the channel will take the next
2381          * job on the queue and execute it anyway.
2382          */
2383         if (!cohc->busy)
2384                 coh901318_queue_start(cohc);
2385
2386         spin_unlock_irqrestore(&cohc->lock, flags);
2387 }
2388
2389 /*
2390  * Here we wrap in the runtime dma control interface
2391  */
2392 struct burst_table {
2393         int burst_8bit;
2394         int burst_16bit;
2395         int burst_32bit;
2396         u32 reg;
2397 };
2398
2399 static const struct burst_table burst_sizes[] = {
2400         {
2401                 .burst_8bit = 64,
2402                 .burst_16bit = 32,
2403                 .burst_32bit = 16,
2404                 .reg = COH901318_CX_CTRL_BURST_COUNT_64_BYTES,
2405         },
2406         {
2407                 .burst_8bit = 48,
2408                 .burst_16bit = 24,
2409                 .burst_32bit = 12,
2410                 .reg = COH901318_CX_CTRL_BURST_COUNT_48_BYTES,
2411         },
2412         {
2413                 .burst_8bit = 32,
2414                 .burst_16bit = 16,
2415                 .burst_32bit = 8,
2416                 .reg = COH901318_CX_CTRL_BURST_COUNT_32_BYTES,
2417         },
2418         {
2419                 .burst_8bit = 16,
2420                 .burst_16bit = 8,
2421                 .burst_32bit = 4,
2422                 .reg = COH901318_CX_CTRL_BURST_COUNT_16_BYTES,
2423         },
2424         {
2425                 .burst_8bit = 8,
2426                 .burst_16bit = 4,
2427                 .burst_32bit = 2,
2428                 .reg = COH901318_CX_CTRL_BURST_COUNT_8_BYTES,
2429         },
2430         {
2431                 .burst_8bit = 4,
2432                 .burst_16bit = 2,
2433                 .burst_32bit = 1,
2434                 .reg = COH901318_CX_CTRL_BURST_COUNT_4_BYTES,
2435         },
2436         {
2437                 .burst_8bit = 2,
2438                 .burst_16bit = 1,
2439                 .burst_32bit = 0,
2440                 .reg = COH901318_CX_CTRL_BURST_COUNT_2_BYTES,
2441         },
2442         {
2443                 .burst_8bit = 1,
2444                 .burst_16bit = 0,
2445                 .burst_32bit = 0,
2446                 .reg = COH901318_CX_CTRL_BURST_COUNT_1_BYTE,
2447         },
2448 };
2449
2450 static void coh901318_dma_set_runtimeconfig(struct dma_chan *chan,
2451                         struct dma_slave_config *config)
2452 {
2453         struct coh901318_chan *cohc = to_coh901318_chan(chan);
2454         dma_addr_t addr;
2455         enum dma_slave_buswidth addr_width;
2456         u32 maxburst;
2457         u32 ctrl = 0;
2458         int i = 0;
2459
2460         /* We only support mem to per or per to mem transfers */
2461         if (config->direction == DMA_DEV_TO_MEM) {
2462                 addr = config->src_addr;
2463                 addr_width = config->src_addr_width;
2464                 maxburst = config->src_maxburst;
2465         } else if (config->direction == DMA_MEM_TO_DEV) {
2466                 addr = config->dst_addr;
2467                 addr_width = config->dst_addr_width;
2468                 maxburst = config->dst_maxburst;
2469         } else {
2470                 dev_err(COHC_2_DEV(cohc), "illegal channel mode\n");
2471                 return;
2472         }
2473
2474         dev_dbg(COHC_2_DEV(cohc), "configure channel for %d byte transfers\n",
2475                 addr_width);
2476         switch (addr_width)  {
2477         case DMA_SLAVE_BUSWIDTH_1_BYTE:
2478                 ctrl |=
2479                         COH901318_CX_CTRL_SRC_BUS_SIZE_8_BITS |
2480                         COH901318_CX_CTRL_DST_BUS_SIZE_8_BITS;
2481
2482                 while (i < ARRAY_SIZE(burst_sizes)) {
2483                         if (burst_sizes[i].burst_8bit <= maxburst)
2484                                 break;
2485                         i++;
2486                 }
2487
2488                 break;
2489         case DMA_SLAVE_BUSWIDTH_2_BYTES:
2490                 ctrl |=
2491                         COH901318_CX_CTRL_SRC_BUS_SIZE_16_BITS |
2492                         COH901318_CX_CTRL_DST_BUS_SIZE_16_BITS;
2493
2494                 while (i < ARRAY_SIZE(burst_sizes)) {
2495                         if (burst_sizes[i].burst_16bit <= maxburst)
2496                                 break;
2497                         i++;
2498                 }
2499
2500                 break;
2501         case DMA_SLAVE_BUSWIDTH_4_BYTES:
2502                 /* Direction doesn't matter here, it's 32/32 bits */
2503                 ctrl |=
2504                         COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
2505                         COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS;
2506
2507                 while (i < ARRAY_SIZE(burst_sizes)) {
2508                         if (burst_sizes[i].burst_32bit <= maxburst)
2509                                 break;
2510                         i++;
2511                 }
2512
2513                 break;
2514         default:
2515                 dev_err(COHC_2_DEV(cohc),
2516                         "bad runtimeconfig: alien address width\n");
2517                 return;
2518         }
2519
2520         ctrl |= burst_sizes[i].reg;
2521         dev_dbg(COHC_2_DEV(cohc),
2522                 "selected burst size %d bytes for address width %d bytes, maxburst %d\n",
2523                 burst_sizes[i].burst_8bit, addr_width, maxburst);
2524
2525         cohc->addr = addr;
2526         cohc->ctrl = ctrl;
2527 }
2528
2529 static int
2530 coh901318_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd,
2531                   unsigned long arg)
2532 {
2533         unsigned long flags;
2534         struct coh901318_chan *cohc = to_coh901318_chan(chan);
2535         struct coh901318_desc *cohd;
2536         void __iomem *virtbase = cohc->base->virtbase;
2537
2538         if (cmd == DMA_SLAVE_CONFIG) {
2539                 struct dma_slave_config *config =
2540                         (struct dma_slave_config *) arg;
2541
2542                 coh901318_dma_set_runtimeconfig(chan, config);
2543                 return 0;
2544           }
2545
2546         if (cmd == DMA_PAUSE) {
2547                 coh901318_pause(chan);
2548                 return 0;
2549         }
2550
2551         if (cmd == DMA_RESUME) {
2552                 coh901318_resume(chan);
2553                 return 0;
2554         }
2555
2556         if (cmd != DMA_TERMINATE_ALL)
2557                 return -ENXIO;
2558
2559         /* The remainder of this function terminates the transfer */
2560         coh901318_pause(chan);
2561         spin_lock_irqsave(&cohc->lock, flags);
2562
2563         /* Clear any pending BE or TC interrupt */
2564         if (cohc->id < 32) {
2565                 writel(1 << cohc->id, virtbase + COH901318_BE_INT_CLEAR1);
2566                 writel(1 << cohc->id, virtbase + COH901318_TC_INT_CLEAR1);
2567         } else {
2568                 writel(1 << (cohc->id - 32), virtbase +
2569                        COH901318_BE_INT_CLEAR2);
2570                 writel(1 << (cohc->id - 32), virtbase +
2571                        COH901318_TC_INT_CLEAR2);
2572         }
2573
2574         enable_powersave(cohc);
2575
2576         while ((cohd = coh901318_first_active_get(cohc))) {
2577                 /* release the lli allocation*/
2578                 coh901318_lli_free(&cohc->base->pool, &cohd->lli);
2579
2580                 /* return desc to free-list */
2581                 coh901318_desc_remove(cohd);
2582                 coh901318_desc_free(cohc, cohd);
2583         }
2584
2585         while ((cohd = coh901318_first_queued(cohc))) {
2586                 /* release the lli allocation*/
2587                 coh901318_lli_free(&cohc->base->pool, &cohd->lli);
2588
2589                 /* return desc to free-list */
2590                 coh901318_desc_remove(cohd);
2591                 coh901318_desc_free(cohc, cohd);
2592         }
2593
2594
2595         cohc->nbr_active_done = 0;
2596         cohc->busy = 0;
2597
2598         spin_unlock_irqrestore(&cohc->lock, flags);
2599
2600         return 0;
2601 }
2602
2603 void coh901318_base_init(struct dma_device *dma, const int *pick_chans,
2604                          struct coh901318_base *base)
2605 {
2606         int chans_i;
2607         int i = 0;
2608         struct coh901318_chan *cohc;
2609
2610         INIT_LIST_HEAD(&dma->channels);
2611
2612         for (chans_i = 0; pick_chans[chans_i] != -1; chans_i += 2) {
2613                 for (i = pick_chans[chans_i]; i <= pick_chans[chans_i+1]; i++) {
2614                         cohc = &base->chans[i];
2615
2616                         cohc->base = base;
2617                         cohc->chan.device = dma;
2618                         cohc->id = i;
2619
2620                         /* TODO: do we really need this lock if only one
2621                          * client is connected to each channel?
2622                          */
2623
2624                         spin_lock_init(&cohc->lock);
2625
2626                         cohc->nbr_active_done = 0;
2627                         cohc->busy = 0;
2628                         INIT_LIST_HEAD(&cohc->free);
2629                         INIT_LIST_HEAD(&cohc->active);
2630                         INIT_LIST_HEAD(&cohc->queue);
2631
2632                         tasklet_init(&cohc->tasklet, dma_tasklet,
2633                                      (unsigned long) cohc);
2634
2635                         list_add_tail(&cohc->chan.device_node,
2636                                       &dma->channels);
2637                 }
2638         }
2639 }
2640
2641 static int __init coh901318_probe(struct platform_device *pdev)
2642 {
2643         int err = 0;
2644         struct coh901318_base *base;
2645         int irq;
2646         struct resource *io;
2647
2648         io = platform_get_resource(pdev, IORESOURCE_MEM, 0);
2649         if (!io)
2650                 return -ENODEV;
2651
2652         /* Map DMA controller registers to virtual memory */
2653         if (devm_request_mem_region(&pdev->dev,
2654                                     io->start,
2655                                     resource_size(io),
2656                                     pdev->dev.driver->name) == NULL)
2657                 return -ENOMEM;
2658
2659         base = devm_kzalloc(&pdev->dev,
2660                             ALIGN(sizeof(struct coh901318_base), 4) +
2661                             U300_DMA_CHANNELS *
2662                             sizeof(struct coh901318_chan),
2663                             GFP_KERNEL);
2664         if (!base)
2665                 return -ENOMEM;
2666
2667         base->chans = ((void *)base) + ALIGN(sizeof(struct coh901318_base), 4);
2668
2669         base->virtbase = devm_ioremap(&pdev->dev, io->start, resource_size(io));
2670         if (!base->virtbase)
2671                 return -ENOMEM;
2672
2673         base->dev = &pdev->dev;
2674         spin_lock_init(&base->pm.lock);
2675         base->pm.started_channels = 0;
2676
2677         COH901318_DEBUGFS_ASSIGN(debugfs_dma_base, base);
2678
2679         irq = platform_get_irq(pdev, 0);
2680         if (irq < 0)
2681                 return irq;
2682
2683         err = devm_request_irq(&pdev->dev, irq, dma_irq_handler, IRQF_DISABLED,
2684                                "coh901318", base);
2685         if (err)
2686                 return err;
2687
2688         err = coh901318_pool_create(&base->pool, &pdev->dev,
2689                                     sizeof(struct coh901318_lli),
2690                                     32);
2691         if (err)
2692                 return err;
2693
2694         /* init channels for device transfers */
2695         coh901318_base_init(&base->dma_slave, dma_slave_channels,
2696                             base);
2697
2698         dma_cap_zero(base->dma_slave.cap_mask);
2699         dma_cap_set(DMA_SLAVE, base->dma_slave.cap_mask);
2700
2701         base->dma_slave.device_alloc_chan_resources = coh901318_alloc_chan_resources;
2702         base->dma_slave.device_free_chan_resources = coh901318_free_chan_resources;
2703         base->dma_slave.device_prep_slave_sg = coh901318_prep_slave_sg;
2704         base->dma_slave.device_tx_status = coh901318_tx_status;
2705         base->dma_slave.device_issue_pending = coh901318_issue_pending;
2706         base->dma_slave.device_control = coh901318_control;
2707         base->dma_slave.dev = &pdev->dev;
2708
2709         err = dma_async_device_register(&base->dma_slave);
2710
2711         if (err)
2712                 goto err_register_slave;
2713
2714         /* init channels for memcpy */
2715         coh901318_base_init(&base->dma_memcpy, dma_memcpy_channels,
2716                             base);
2717
2718         dma_cap_zero(base->dma_memcpy.cap_mask);
2719         dma_cap_set(DMA_MEMCPY, base->dma_memcpy.cap_mask);
2720
2721         base->dma_memcpy.device_alloc_chan_resources = coh901318_alloc_chan_resources;
2722         base->dma_memcpy.device_free_chan_resources = coh901318_free_chan_resources;
2723         base->dma_memcpy.device_prep_dma_memcpy = coh901318_prep_memcpy;
2724         base->dma_memcpy.device_tx_status = coh901318_tx_status;
2725         base->dma_memcpy.device_issue_pending = coh901318_issue_pending;
2726         base->dma_memcpy.device_control = coh901318_control;
2727         base->dma_memcpy.dev = &pdev->dev;
2728         /*
2729          * This controller can only access address at even 32bit boundaries,
2730          * i.e. 2^2
2731          */
2732         base->dma_memcpy.copy_align = 2;
2733         err = dma_async_device_register(&base->dma_memcpy);
2734
2735         if (err)
2736                 goto err_register_memcpy;
2737
2738         platform_set_drvdata(pdev, base);
2739         dev_info(&pdev->dev, "Initialized COH901318 DMA on virtual base 0x%08x\n",
2740                 (u32) base->virtbase);
2741
2742         return err;
2743
2744  err_register_memcpy:
2745         dma_async_device_unregister(&base->dma_slave);
2746  err_register_slave:
2747         coh901318_pool_destroy(&base->pool);
2748         return err;
2749 }
2750
2751 static int __exit coh901318_remove(struct platform_device *pdev)
2752 {
2753         struct coh901318_base *base = platform_get_drvdata(pdev);
2754
2755         dma_async_device_unregister(&base->dma_memcpy);
2756         dma_async_device_unregister(&base->dma_slave);
2757         coh901318_pool_destroy(&base->pool);
2758         return 0;
2759 }
2760
2761
2762 static struct platform_driver coh901318_driver = {
2763         .remove = __exit_p(coh901318_remove),
2764         .driver = {
2765                 .name   = "coh901318",
2766         },
2767 };
2768
2769 int __init coh901318_init(void)
2770 {
2771         return platform_driver_probe(&coh901318_driver, coh901318_probe);
2772 }
2773 subsys_initcall(coh901318_init);
2774
2775 void __exit coh901318_exit(void)
2776 {
2777         platform_driver_unregister(&coh901318_driver);
2778 }
2779 module_exit(coh901318_exit);
2780
2781 MODULE_LICENSE("GPL");
2782 MODULE_AUTHOR("Per Friden");