2 * Copyright (c) 2006-2008 Intel Corporation
3 * Copyright (c) 2007 Dave Airlie <airlied@linux.ie>
4 * Copyright (c) 2008 Red Hat Inc.
6 * DRM core CRTC related functions
8 * Permission to use, copy, modify, distribute, and sell this software and its
9 * documentation for any purpose is hereby granted without fee, provided that
10 * the above copyright notice appear in all copies and that both that copyright
11 * notice and this permission notice appear in supporting documentation, and
12 * that the name of the copyright holders not be used in advertising or
13 * publicity pertaining to distribution of the software without specific,
14 * written prior permission. The copyright holders make no representations
15 * about the suitability of this software for any purpose. It is provided "as
16 * is" without express or implied warranty.
18 * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
19 * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
20 * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
21 * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
22 * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
23 * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
28 * Eric Anholt <eric@anholt.net>
29 * Dave Airlie <airlied@linux.ie>
30 * Jesse Barnes <jesse.barnes@intel.com>
32 #include <linux/ctype.h>
33 #include <linux/list.h>
34 #include <linux/slab.h>
35 #include <linux/export.h>
37 #include <drm/drm_crtc.h>
38 #include <drm/drm_edid.h>
39 #include <drm/drm_fourcc.h>
40 #include <drm/drm_modeset_lock.h>
41 #include <drm/drm_atomic.h>
43 #include "drm_crtc_internal.h"
44 #include "drm_internal.h"
46 static struct drm_framebuffer *
47 internal_framebuffer_create(struct drm_device *dev,
48 struct drm_mode_fb_cmd2 *r,
49 struct drm_file *file_priv);
51 /* Avoid boilerplate. I'm tired of typing. */
52 #define DRM_ENUM_NAME_FN(fnname, list) \
53 const char *fnname(int val) \
56 for (i = 0; i < ARRAY_SIZE(list); i++) { \
57 if (list[i].type == val) \
58 return list[i].name; \
66 static const struct drm_prop_enum_list drm_dpms_enum_list[] = {
67 { DRM_MODE_DPMS_ON, "On" },
68 { DRM_MODE_DPMS_STANDBY, "Standby" },
69 { DRM_MODE_DPMS_SUSPEND, "Suspend" },
70 { DRM_MODE_DPMS_OFF, "Off" }
73 DRM_ENUM_NAME_FN(drm_get_dpms_name, drm_dpms_enum_list)
75 static const struct drm_prop_enum_list drm_plane_type_enum_list[] = {
76 { DRM_PLANE_TYPE_OVERLAY, "Overlay" },
77 { DRM_PLANE_TYPE_PRIMARY, "Primary" },
78 { DRM_PLANE_TYPE_CURSOR, "Cursor" },
84 static const struct drm_prop_enum_list drm_scaling_mode_enum_list[] = {
85 { DRM_MODE_SCALE_NONE, "None" },
86 { DRM_MODE_SCALE_FULLSCREEN, "Full" },
87 { DRM_MODE_SCALE_CENTER, "Center" },
88 { DRM_MODE_SCALE_ASPECT, "Full aspect" },
91 static const struct drm_prop_enum_list drm_aspect_ratio_enum_list[] = {
92 { DRM_MODE_PICTURE_ASPECT_NONE, "Automatic" },
93 { DRM_MODE_PICTURE_ASPECT_4_3, "4:3" },
94 { DRM_MODE_PICTURE_ASPECT_16_9, "16:9" },
98 * Non-global properties, but "required" for certain connectors.
100 static const struct drm_prop_enum_list drm_dvi_i_select_enum_list[] = {
101 { DRM_MODE_SUBCONNECTOR_Automatic, "Automatic" }, /* DVI-I and TV-out */
102 { DRM_MODE_SUBCONNECTOR_DVID, "DVI-D" }, /* DVI-I */
103 { DRM_MODE_SUBCONNECTOR_DVIA, "DVI-A" }, /* DVI-I */
106 DRM_ENUM_NAME_FN(drm_get_dvi_i_select_name, drm_dvi_i_select_enum_list)
108 static const struct drm_prop_enum_list drm_dvi_i_subconnector_enum_list[] = {
109 { DRM_MODE_SUBCONNECTOR_Unknown, "Unknown" }, /* DVI-I and TV-out */
110 { DRM_MODE_SUBCONNECTOR_DVID, "DVI-D" }, /* DVI-I */
111 { DRM_MODE_SUBCONNECTOR_DVIA, "DVI-A" }, /* DVI-I */
114 DRM_ENUM_NAME_FN(drm_get_dvi_i_subconnector_name,
115 drm_dvi_i_subconnector_enum_list)
117 static const struct drm_prop_enum_list drm_tv_select_enum_list[] = {
118 { DRM_MODE_SUBCONNECTOR_Automatic, "Automatic" }, /* DVI-I and TV-out */
119 { DRM_MODE_SUBCONNECTOR_Composite, "Composite" }, /* TV-out */
120 { DRM_MODE_SUBCONNECTOR_SVIDEO, "SVIDEO" }, /* TV-out */
121 { DRM_MODE_SUBCONNECTOR_Component, "Component" }, /* TV-out */
122 { DRM_MODE_SUBCONNECTOR_SCART, "SCART" }, /* TV-out */
125 DRM_ENUM_NAME_FN(drm_get_tv_select_name, drm_tv_select_enum_list)
127 static const struct drm_prop_enum_list drm_tv_subconnector_enum_list[] = {
128 { DRM_MODE_SUBCONNECTOR_Unknown, "Unknown" }, /* DVI-I and TV-out */
129 { DRM_MODE_SUBCONNECTOR_Composite, "Composite" }, /* TV-out */
130 { DRM_MODE_SUBCONNECTOR_SVIDEO, "SVIDEO" }, /* TV-out */
131 { DRM_MODE_SUBCONNECTOR_Component, "Component" }, /* TV-out */
132 { DRM_MODE_SUBCONNECTOR_SCART, "SCART" }, /* TV-out */
135 DRM_ENUM_NAME_FN(drm_get_tv_subconnector_name,
136 drm_tv_subconnector_enum_list)
138 static const struct drm_prop_enum_list drm_dirty_info_enum_list[] = {
139 { DRM_MODE_DIRTY_OFF, "Off" },
140 { DRM_MODE_DIRTY_ON, "On" },
141 { DRM_MODE_DIRTY_ANNOTATE, "Annotate" },
144 struct drm_conn_prop_enum_list {
151 * Connector and encoder types.
153 static struct drm_conn_prop_enum_list drm_connector_enum_list[] = {
154 { DRM_MODE_CONNECTOR_Unknown, "Unknown" },
155 { DRM_MODE_CONNECTOR_VGA, "VGA" },
156 { DRM_MODE_CONNECTOR_DVII, "DVI-I" },
157 { DRM_MODE_CONNECTOR_DVID, "DVI-D" },
158 { DRM_MODE_CONNECTOR_DVIA, "DVI-A" },
159 { DRM_MODE_CONNECTOR_Composite, "Composite" },
160 { DRM_MODE_CONNECTOR_SVIDEO, "SVIDEO" },
161 { DRM_MODE_CONNECTOR_LVDS, "LVDS" },
162 { DRM_MODE_CONNECTOR_Component, "Component" },
163 { DRM_MODE_CONNECTOR_9PinDIN, "DIN" },
164 { DRM_MODE_CONNECTOR_DisplayPort, "DP" },
165 { DRM_MODE_CONNECTOR_HDMIA, "HDMI-A" },
166 { DRM_MODE_CONNECTOR_HDMIB, "HDMI-B" },
167 { DRM_MODE_CONNECTOR_TV, "TV" },
168 { DRM_MODE_CONNECTOR_eDP, "eDP" },
169 { DRM_MODE_CONNECTOR_VIRTUAL, "Virtual" },
170 { DRM_MODE_CONNECTOR_DSI, "DSI" },
173 static const struct drm_prop_enum_list drm_encoder_enum_list[] = {
174 { DRM_MODE_ENCODER_NONE, "None" },
175 { DRM_MODE_ENCODER_DAC, "DAC" },
176 { DRM_MODE_ENCODER_TMDS, "TMDS" },
177 { DRM_MODE_ENCODER_LVDS, "LVDS" },
178 { DRM_MODE_ENCODER_TVDAC, "TV" },
179 { DRM_MODE_ENCODER_VIRTUAL, "Virtual" },
180 { DRM_MODE_ENCODER_DSI, "DSI" },
181 { DRM_MODE_ENCODER_DPMST, "DP MST" },
184 static const struct drm_prop_enum_list drm_subpixel_enum_list[] = {
185 { SubPixelUnknown, "Unknown" },
186 { SubPixelHorizontalRGB, "Horizontal RGB" },
187 { SubPixelHorizontalBGR, "Horizontal BGR" },
188 { SubPixelVerticalRGB, "Vertical RGB" },
189 { SubPixelVerticalBGR, "Vertical BGR" },
190 { SubPixelNone, "None" },
193 void drm_connector_ida_init(void)
197 for (i = 0; i < ARRAY_SIZE(drm_connector_enum_list); i++)
198 ida_init(&drm_connector_enum_list[i].ida);
201 void drm_connector_ida_destroy(void)
205 for (i = 0; i < ARRAY_SIZE(drm_connector_enum_list); i++)
206 ida_destroy(&drm_connector_enum_list[i].ida);
210 * drm_get_connector_status_name - return a string for connector status
211 * @status: connector status to compute name of
213 * In contrast to the other drm_get_*_name functions this one here returns a
214 * const pointer and hence is threadsafe.
216 const char *drm_get_connector_status_name(enum drm_connector_status status)
218 if (status == connector_status_connected)
220 else if (status == connector_status_disconnected)
221 return "disconnected";
225 EXPORT_SYMBOL(drm_get_connector_status_name);
228 * drm_get_subpixel_order_name - return a string for a given subpixel enum
229 * @order: enum of subpixel_order
231 * Note you could abuse this and return something out of bounds, but that
232 * would be a caller error. No unscrubbed user data should make it here.
234 const char *drm_get_subpixel_order_name(enum subpixel_order order)
236 return drm_subpixel_enum_list[order].name;
238 EXPORT_SYMBOL(drm_get_subpixel_order_name);
240 static char printable_char(int c)
242 return isascii(c) && isprint(c) ? c : '?';
246 * drm_get_format_name - return a string for drm fourcc format
247 * @format: format to compute name of
249 * Note that the buffer used by this function is globally shared and owned by
250 * the function itself.
252 * FIXME: This isn't really multithreading safe.
254 const char *drm_get_format_name(uint32_t format)
258 snprintf(buf, sizeof(buf),
259 "%c%c%c%c %s-endian (0x%08x)",
260 printable_char(format & 0xff),
261 printable_char((format >> 8) & 0xff),
262 printable_char((format >> 16) & 0xff),
263 printable_char((format >> 24) & 0x7f),
264 format & DRM_FORMAT_BIG_ENDIAN ? "big" : "little",
269 EXPORT_SYMBOL(drm_get_format_name);
272 * Internal function to assign a slot in the object idr and optionally
273 * register the object into the idr.
275 static int drm_mode_object_get_reg(struct drm_device *dev,
276 struct drm_mode_object *obj,
282 mutex_lock(&dev->mode_config.idr_mutex);
283 ret = idr_alloc(&dev->mode_config.crtc_idr, register_obj ? obj : NULL, 1, 0, GFP_KERNEL);
286 * Set up the object linking under the protection of the idr
287 * lock so that other users can't see inconsistent state.
290 obj->type = obj_type;
292 mutex_unlock(&dev->mode_config.idr_mutex);
294 return ret < 0 ? ret : 0;
298 * drm_mode_object_get - allocate a new modeset identifier
300 * @obj: object pointer, used to generate unique ID
301 * @obj_type: object type
303 * Create a unique identifier based on @ptr in @dev's identifier space. Used
304 * for tracking modes, CRTCs and connectors. Note that despite the _get postfix
305 * modeset identifiers are _not_ reference counted. Hence don't use this for
306 * reference counted modeset objects like framebuffers.
309 * Zero on success, error code on failure.
311 int drm_mode_object_get(struct drm_device *dev,
312 struct drm_mode_object *obj, uint32_t obj_type)
314 return drm_mode_object_get_reg(dev, obj, obj_type, true);
317 static void drm_mode_object_register(struct drm_device *dev,
318 struct drm_mode_object *obj)
320 mutex_lock(&dev->mode_config.idr_mutex);
321 idr_replace(&dev->mode_config.crtc_idr, obj, obj->id);
322 mutex_unlock(&dev->mode_config.idr_mutex);
326 * drm_mode_object_put - free a modeset identifer
328 * @object: object to free
330 * Free @id from @dev's unique identifier pool. Note that despite the _get
331 * postfix modeset identifiers are _not_ reference counted. Hence don't use this
332 * for reference counted modeset objects like framebuffers.
334 void drm_mode_object_put(struct drm_device *dev,
335 struct drm_mode_object *object)
337 mutex_lock(&dev->mode_config.idr_mutex);
338 idr_remove(&dev->mode_config.crtc_idr, object->id);
339 mutex_unlock(&dev->mode_config.idr_mutex);
342 static struct drm_mode_object *_object_find(struct drm_device *dev,
343 uint32_t id, uint32_t type)
345 struct drm_mode_object *obj = NULL;
347 mutex_lock(&dev->mode_config.idr_mutex);
348 obj = idr_find(&dev->mode_config.crtc_idr, id);
349 if (obj && type != DRM_MODE_OBJECT_ANY && obj->type != type)
351 if (obj && obj->id != id)
353 /* don't leak out unref'd fb's */
355 (obj->type == DRM_MODE_OBJECT_FB ||
356 obj->type == DRM_MODE_OBJECT_BLOB))
358 mutex_unlock(&dev->mode_config.idr_mutex);
364 * drm_mode_object_find - look up a drm object with static lifetime
366 * @id: id of the mode object
367 * @type: type of the mode object
369 * Note that framebuffers cannot be looked up with this functions - since those
370 * are reference counted, they need special treatment. Even with
371 * DRM_MODE_OBJECT_ANY (although that will simply return NULL
372 * rather than WARN_ON()).
374 struct drm_mode_object *drm_mode_object_find(struct drm_device *dev,
375 uint32_t id, uint32_t type)
377 struct drm_mode_object *obj = NULL;
379 /* Framebuffers are reference counted and need their own lookup
381 WARN_ON(type == DRM_MODE_OBJECT_FB || type == DRM_MODE_OBJECT_BLOB);
382 obj = _object_find(dev, id, type);
385 EXPORT_SYMBOL(drm_mode_object_find);
388 * drm_framebuffer_init - initialize a framebuffer
390 * @fb: framebuffer to be initialized
391 * @funcs: ... with these functions
393 * Allocates an ID for the framebuffer's parent mode object, sets its mode
394 * functions & device file and adds it to the master fd list.
397 * This functions publishes the fb and makes it available for concurrent access
398 * by other users. Which means by this point the fb _must_ be fully set up -
399 * since all the fb attributes are invariant over its lifetime, no further
400 * locking but only correct reference counting is required.
403 * Zero on success, error code on failure.
405 int drm_framebuffer_init(struct drm_device *dev, struct drm_framebuffer *fb,
406 const struct drm_framebuffer_funcs *funcs)
410 mutex_lock(&dev->mode_config.fb_lock);
411 kref_init(&fb->refcount);
412 INIT_LIST_HEAD(&fb->filp_head);
416 ret = drm_mode_object_get(dev, &fb->base, DRM_MODE_OBJECT_FB);
420 dev->mode_config.num_fb++;
421 list_add(&fb->head, &dev->mode_config.fb_list);
423 mutex_unlock(&dev->mode_config.fb_lock);
427 EXPORT_SYMBOL(drm_framebuffer_init);
429 /* dev->mode_config.fb_lock must be held! */
430 static void __drm_framebuffer_unregister(struct drm_device *dev,
431 struct drm_framebuffer *fb)
433 mutex_lock(&dev->mode_config.idr_mutex);
434 idr_remove(&dev->mode_config.crtc_idr, fb->base.id);
435 mutex_unlock(&dev->mode_config.idr_mutex);
440 static void drm_framebuffer_free(struct kref *kref)
442 struct drm_framebuffer *fb =
443 container_of(kref, struct drm_framebuffer, refcount);
444 struct drm_device *dev = fb->dev;
447 * The lookup idr holds a weak reference, which has not necessarily been
448 * removed at this point. Check for that.
450 mutex_lock(&dev->mode_config.fb_lock);
452 /* Mark fb as reaped and drop idr ref. */
453 __drm_framebuffer_unregister(dev, fb);
455 mutex_unlock(&dev->mode_config.fb_lock);
457 fb->funcs->destroy(fb);
460 static struct drm_framebuffer *__drm_framebuffer_lookup(struct drm_device *dev,
463 struct drm_mode_object *obj = NULL;
464 struct drm_framebuffer *fb;
466 mutex_lock(&dev->mode_config.idr_mutex);
467 obj = idr_find(&dev->mode_config.crtc_idr, id);
468 if (!obj || (obj->type != DRM_MODE_OBJECT_FB) || (obj->id != id))
472 mutex_unlock(&dev->mode_config.idr_mutex);
478 * drm_framebuffer_lookup - look up a drm framebuffer and grab a reference
480 * @id: id of the fb object
482 * If successful, this grabs an additional reference to the framebuffer -
483 * callers need to make sure to eventually unreference the returned framebuffer
484 * again, using @drm_framebuffer_unreference.
486 struct drm_framebuffer *drm_framebuffer_lookup(struct drm_device *dev,
489 struct drm_framebuffer *fb;
491 mutex_lock(&dev->mode_config.fb_lock);
492 fb = __drm_framebuffer_lookup(dev, id);
494 if (!kref_get_unless_zero(&fb->refcount))
497 mutex_unlock(&dev->mode_config.fb_lock);
501 EXPORT_SYMBOL(drm_framebuffer_lookup);
504 * drm_framebuffer_unreference - unref a framebuffer
505 * @fb: framebuffer to unref
507 * This functions decrements the fb's refcount and frees it if it drops to zero.
509 void drm_framebuffer_unreference(struct drm_framebuffer *fb)
511 DRM_DEBUG("%p: FB ID: %d (%d)\n", fb, fb->base.id, atomic_read(&fb->refcount.refcount));
512 kref_put(&fb->refcount, drm_framebuffer_free);
514 EXPORT_SYMBOL(drm_framebuffer_unreference);
517 * drm_framebuffer_reference - incr the fb refcnt
520 * This functions increments the fb's refcount.
522 void drm_framebuffer_reference(struct drm_framebuffer *fb)
524 DRM_DEBUG("%p: FB ID: %d (%d)\n", fb, fb->base.id, atomic_read(&fb->refcount.refcount));
525 kref_get(&fb->refcount);
527 EXPORT_SYMBOL(drm_framebuffer_reference);
530 * drm_framebuffer_unregister_private - unregister a private fb from the lookup idr
531 * @fb: fb to unregister
533 * Drivers need to call this when cleaning up driver-private framebuffers, e.g.
534 * those used for fbdev. Note that the caller must hold a reference of it's own,
535 * i.e. the object may not be destroyed through this call (since it'll lead to a
536 * locking inversion).
538 void drm_framebuffer_unregister_private(struct drm_framebuffer *fb)
540 struct drm_device *dev;
547 mutex_lock(&dev->mode_config.fb_lock);
548 /* Mark fb as reaped and drop idr ref. */
549 __drm_framebuffer_unregister(dev, fb);
550 mutex_unlock(&dev->mode_config.fb_lock);
552 EXPORT_SYMBOL(drm_framebuffer_unregister_private);
555 * drm_framebuffer_cleanup - remove a framebuffer object
556 * @fb: framebuffer to remove
558 * Cleanup framebuffer. This function is intended to be used from the drivers
559 * ->destroy callback. It can also be used to clean up driver private
560 * framebuffers embedded into a larger structure.
562 * Note that this function does not remove the fb from active usuage - if it is
563 * still used anywhere, hilarity can ensue since userspace could call getfb on
564 * the id and get back -EINVAL. Obviously no concern at driver unload time.
566 * Also, the framebuffer will not be removed from the lookup idr - for
567 * user-created framebuffers this will happen in in the rmfb ioctl. For
568 * driver-private objects (e.g. for fbdev) drivers need to explicitly call
569 * drm_framebuffer_unregister_private.
571 void drm_framebuffer_cleanup(struct drm_framebuffer *fb)
573 struct drm_device *dev = fb->dev;
575 mutex_lock(&dev->mode_config.fb_lock);
577 dev->mode_config.num_fb--;
578 mutex_unlock(&dev->mode_config.fb_lock);
580 EXPORT_SYMBOL(drm_framebuffer_cleanup);
583 * drm_framebuffer_remove - remove and unreference a framebuffer object
584 * @fb: framebuffer to remove
586 * Scans all the CRTCs and planes in @dev's mode_config. If they're
587 * using @fb, removes it, setting it to NULL. Then drops the reference to the
588 * passed-in framebuffer. Might take the modeset locks.
590 * Note that this function optimizes the cleanup away if the caller holds the
591 * last reference to the framebuffer. It is also guaranteed to not take the
592 * modeset locks in this case.
594 void drm_framebuffer_remove(struct drm_framebuffer *fb)
596 struct drm_device *dev;
597 struct drm_crtc *crtc;
598 struct drm_plane *plane;
599 struct drm_mode_set set;
607 WARN_ON(!list_empty(&fb->filp_head));
610 * drm ABI mandates that we remove any deleted framebuffers from active
611 * useage. But since most sane clients only remove framebuffers they no
612 * longer need, try to optimize this away.
614 * Since we're holding a reference ourselves, observing a refcount of 1
615 * means that we're the last holder and can skip it. Also, the refcount
616 * can never increase from 1 again, so we don't need any barriers or
619 * Note that userspace could try to race with use and instate a new
620 * usage _after_ we've cleared all current ones. End result will be an
621 * in-use fb with fb-id == 0. Userspace is allowed to shoot its own foot
624 if (atomic_read(&fb->refcount.refcount) > 1) {
625 drm_modeset_lock_all(dev);
626 /* remove from any CRTC */
627 drm_for_each_crtc(crtc, dev) {
628 if (crtc->primary->fb == fb) {
629 /* should turn off the crtc */
630 memset(&set, 0, sizeof(struct drm_mode_set));
633 ret = drm_mode_set_config_internal(&set);
635 DRM_ERROR("failed to reset crtc %p when fb was deleted\n", crtc);
639 drm_for_each_plane(plane, dev) {
641 drm_plane_force_disable(plane);
643 drm_modeset_unlock_all(dev);
646 drm_framebuffer_unreference(fb);
648 EXPORT_SYMBOL(drm_framebuffer_remove);
650 DEFINE_WW_CLASS(crtc_ww_class);
653 * drm_crtc_init_with_planes - Initialise a new CRTC object with
654 * specified primary and cursor planes.
656 * @crtc: CRTC object to init
657 * @primary: Primary plane for CRTC
658 * @cursor: Cursor plane for CRTC
659 * @funcs: callbacks for the new CRTC
660 * @name: printf style format string for the CRTC name, or NULL for default name
662 * Inits a new object created as base part of a driver crtc object.
665 * Zero on success, error code on failure.
667 int drm_crtc_init_with_planes(struct drm_device *dev, struct drm_crtc *crtc,
668 struct drm_plane *primary,
669 struct drm_plane *cursor,
670 const struct drm_crtc_funcs *funcs,
671 const char *name, ...)
673 struct drm_mode_config *config = &dev->mode_config;
676 WARN_ON(primary && primary->type != DRM_PLANE_TYPE_PRIMARY);
677 WARN_ON(cursor && cursor->type != DRM_PLANE_TYPE_CURSOR);
682 drm_modeset_lock_init(&crtc->mutex);
683 ret = drm_mode_object_get(dev, &crtc->base, DRM_MODE_OBJECT_CRTC);
687 crtc->base.properties = &crtc->properties;
689 list_add_tail(&crtc->head, &config->crtc_list);
692 crtc->primary = primary;
693 crtc->cursor = cursor;
695 primary->possible_crtcs = 1 << drm_crtc_index(crtc);
697 cursor->possible_crtcs = 1 << drm_crtc_index(crtc);
699 if (drm_core_check_feature(dev, DRIVER_ATOMIC)) {
700 drm_object_attach_property(&crtc->base, config->prop_active, 0);
701 drm_object_attach_property(&crtc->base, config->prop_mode_id, 0);
706 EXPORT_SYMBOL(drm_crtc_init_with_planes);
709 * drm_crtc_cleanup - Clean up the core crtc usage
710 * @crtc: CRTC to cleanup
712 * This function cleans up @crtc and removes it from the DRM mode setting
713 * core. Note that the function does *not* free the crtc structure itself,
714 * this is the responsibility of the caller.
716 void drm_crtc_cleanup(struct drm_crtc *crtc)
718 struct drm_device *dev = crtc->dev;
720 kfree(crtc->gamma_store);
721 crtc->gamma_store = NULL;
723 drm_modeset_lock_fini(&crtc->mutex);
725 drm_mode_object_put(dev, &crtc->base);
726 list_del(&crtc->head);
727 dev->mode_config.num_crtc--;
729 WARN_ON(crtc->state && !crtc->funcs->atomic_destroy_state);
730 if (crtc->state && crtc->funcs->atomic_destroy_state)
731 crtc->funcs->atomic_destroy_state(crtc, crtc->state);
733 memset(crtc, 0, sizeof(*crtc));
735 EXPORT_SYMBOL(drm_crtc_cleanup);
738 * drm_crtc_index - find the index of a registered CRTC
739 * @crtc: CRTC to find index for
741 * Given a registered CRTC, return the index of that CRTC within a DRM
742 * device's list of CRTCs.
744 unsigned int drm_crtc_index(struct drm_crtc *crtc)
746 unsigned int index = 0;
747 struct drm_crtc *tmp;
749 drm_for_each_crtc(tmp, crtc->dev) {
758 EXPORT_SYMBOL(drm_crtc_index);
761 * drm_mode_remove - remove and free a mode
762 * @connector: connector list to modify
763 * @mode: mode to remove
765 * Remove @mode from @connector's mode list, then free it.
767 static void drm_mode_remove(struct drm_connector *connector,
768 struct drm_display_mode *mode)
770 list_del(&mode->head);
771 drm_mode_destroy(connector->dev, mode);
775 * drm_display_info_set_bus_formats - set the supported bus formats
776 * @info: display info to store bus formats in
777 * @formats: array containing the supported bus formats
778 * @num_formats: the number of entries in the fmts array
780 * Store the supported bus formats in display info structure.
781 * See MEDIA_BUS_FMT_* definitions in include/uapi/linux/media-bus-format.h for
782 * a full list of available formats.
784 int drm_display_info_set_bus_formats(struct drm_display_info *info,
786 unsigned int num_formats)
790 if (!formats && num_formats)
793 if (formats && num_formats) {
794 fmts = kmemdup(formats, sizeof(*formats) * num_formats,
800 kfree(info->bus_formats);
801 info->bus_formats = fmts;
802 info->num_bus_formats = num_formats;
806 EXPORT_SYMBOL(drm_display_info_set_bus_formats);
809 * drm_connector_get_cmdline_mode - reads the user's cmdline mode
810 * @connector: connector to quwery
812 * The kernel supports per-connector configration of its consoles through
813 * use of the video= parameter. This function parses that option and
814 * extracts the user's specified mode (or enable/disable status) for a
815 * particular connector. This is typically only used during the early fbdev
818 static void drm_connector_get_cmdline_mode(struct drm_connector *connector)
820 struct drm_cmdline_mode *mode = &connector->cmdline_mode;
823 if (fb_get_options(connector->name, &option))
826 if (!drm_mode_parse_command_line_for_connector(option,
834 switch (mode->force) {
838 case DRM_FORCE_ON_DIGITAL:
847 DRM_INFO("forcing %s connector %s\n", connector->name, s);
848 connector->force = mode->force;
851 DRM_DEBUG_KMS("cmdline mode for connector %s %dx%d@%dHz%s%s%s\n",
853 mode->xres, mode->yres,
854 mode->refresh_specified ? mode->refresh : 60,
855 mode->rb ? " reduced blanking" : "",
856 mode->margins ? " with margins" : "",
857 mode->interlace ? " interlaced" : "");
861 * drm_connector_init - Init a preallocated connector
863 * @connector: the connector to init
864 * @funcs: callbacks for this connector
865 * @connector_type: user visible type of the connector
867 * Initialises a preallocated connector. Connectors should be
868 * subclassed as part of driver connector objects.
871 * Zero on success, error code on failure.
873 int drm_connector_init(struct drm_device *dev,
874 struct drm_connector *connector,
875 const struct drm_connector_funcs *funcs,
878 struct drm_mode_config *config = &dev->mode_config;
880 struct ida *connector_ida =
881 &drm_connector_enum_list[connector_type].ida;
883 drm_modeset_lock_all(dev);
885 ret = drm_mode_object_get_reg(dev, &connector->base, DRM_MODE_OBJECT_CONNECTOR, false);
889 connector->base.properties = &connector->properties;
890 connector->dev = dev;
891 connector->funcs = funcs;
892 connector->connector_type = connector_type;
893 connector->connector_type_id =
894 ida_simple_get(connector_ida, 1, 0, GFP_KERNEL);
895 if (connector->connector_type_id < 0) {
896 ret = connector->connector_type_id;
900 kasprintf(GFP_KERNEL, "%s-%d",
901 drm_connector_enum_list[connector_type].name,
902 connector->connector_type_id);
903 if (!connector->name) {
908 INIT_LIST_HEAD(&connector->probed_modes);
909 INIT_LIST_HEAD(&connector->modes);
910 connector->edid_blob_ptr = NULL;
911 connector->status = connector_status_unknown;
913 drm_connector_get_cmdline_mode(connector);
915 /* We should add connectors at the end to avoid upsetting the connector
917 list_add_tail(&connector->head, &config->connector_list);
918 config->num_connector++;
920 if (connector_type != DRM_MODE_CONNECTOR_VIRTUAL)
921 drm_object_attach_property(&connector->base,
922 config->edid_property,
925 drm_object_attach_property(&connector->base,
926 config->dpms_property, 0);
928 if (drm_core_check_feature(dev, DRIVER_ATOMIC)) {
929 drm_object_attach_property(&connector->base, config->prop_crtc_id, 0);
932 connector->debugfs_entry = NULL;
936 drm_mode_object_put(dev, &connector->base);
939 drm_modeset_unlock_all(dev);
943 EXPORT_SYMBOL(drm_connector_init);
946 * drm_connector_cleanup - cleans up an initialised connector
947 * @connector: connector to cleanup
949 * Cleans up the connector but doesn't free the object.
951 void drm_connector_cleanup(struct drm_connector *connector)
953 struct drm_device *dev = connector->dev;
954 struct drm_display_mode *mode, *t;
956 if (connector->tile_group) {
957 drm_mode_put_tile_group(dev, connector->tile_group);
958 connector->tile_group = NULL;
961 list_for_each_entry_safe(mode, t, &connector->probed_modes, head)
962 drm_mode_remove(connector, mode);
964 list_for_each_entry_safe(mode, t, &connector->modes, head)
965 drm_mode_remove(connector, mode);
967 ida_remove(&drm_connector_enum_list[connector->connector_type].ida,
968 connector->connector_type_id);
970 kfree(connector->display_info.bus_formats);
971 drm_mode_object_put(dev, &connector->base);
972 kfree(connector->name);
973 connector->name = NULL;
974 list_del(&connector->head);
975 dev->mode_config.num_connector--;
977 WARN_ON(connector->state && !connector->funcs->atomic_destroy_state);
978 if (connector->state && connector->funcs->atomic_destroy_state)
979 connector->funcs->atomic_destroy_state(connector,
982 memset(connector, 0, sizeof(*connector));
984 EXPORT_SYMBOL(drm_connector_cleanup);
987 * drm_connector_index - find the index of a registered connector
988 * @connector: connector to find index for
990 * Given a registered connector, return the index of that connector within a DRM
991 * device's list of connectors.
993 unsigned int drm_connector_index(struct drm_connector *connector)
995 unsigned int index = 0;
996 struct drm_connector *tmp;
997 struct drm_mode_config *config = &connector->dev->mode_config;
999 WARN_ON(!drm_modeset_is_locked(&config->connection_mutex));
1001 drm_for_each_connector(tmp, connector->dev) {
1002 if (tmp == connector)
1010 EXPORT_SYMBOL(drm_connector_index);
1013 * drm_connector_register - register a connector
1014 * @connector: the connector to register
1016 * Register userspace interfaces for a connector
1019 * Zero on success, error code on failure.
1021 int drm_connector_register(struct drm_connector *connector)
1025 drm_mode_object_register(connector->dev, &connector->base);
1027 ret = drm_sysfs_connector_add(connector);
1031 ret = drm_debugfs_connector_add(connector);
1033 drm_sysfs_connector_remove(connector);
1039 EXPORT_SYMBOL(drm_connector_register);
1042 * drm_connector_unregister - unregister a connector
1043 * @connector: the connector to unregister
1045 * Unregister userspace interfaces for a connector
1047 void drm_connector_unregister(struct drm_connector *connector)
1049 drm_sysfs_connector_remove(connector);
1050 drm_debugfs_connector_remove(connector);
1052 EXPORT_SYMBOL(drm_connector_unregister);
1056 * drm_connector_unplug_all - unregister connector userspace interfaces
1059 * This function unregisters all connector userspace interfaces in sysfs. Should
1060 * be call when the device is disconnected, e.g. from an usb driver's
1061 * ->disconnect callback.
1063 void drm_connector_unplug_all(struct drm_device *dev)
1065 struct drm_connector *connector;
1067 /* FIXME: taking the mode config mutex ends up in a clash with sysfs */
1068 list_for_each_entry(connector, &dev->mode_config.connector_list, head)
1069 drm_connector_unregister(connector);
1072 EXPORT_SYMBOL(drm_connector_unplug_all);
1075 * drm_encoder_init - Init a preallocated encoder
1077 * @encoder: the encoder to init
1078 * @funcs: callbacks for this encoder
1079 * @encoder_type: user visible type of the encoder
1080 * @name: printf style format string for the encoder name, or NULL for default name
1082 * Initialises a preallocated encoder. Encoder should be
1083 * subclassed as part of driver encoder objects.
1086 * Zero on success, error code on failure.
1088 int drm_encoder_init(struct drm_device *dev,
1089 struct drm_encoder *encoder,
1090 const struct drm_encoder_funcs *funcs,
1091 int encoder_type, const char *name, ...)
1095 drm_modeset_lock_all(dev);
1097 ret = drm_mode_object_get(dev, &encoder->base, DRM_MODE_OBJECT_ENCODER);
1102 encoder->encoder_type = encoder_type;
1103 encoder->funcs = funcs;
1104 encoder->name = kasprintf(GFP_KERNEL, "%s-%d",
1105 drm_encoder_enum_list[encoder_type].name,
1107 if (!encoder->name) {
1112 list_add_tail(&encoder->head, &dev->mode_config.encoder_list);
1113 dev->mode_config.num_encoder++;
1117 drm_mode_object_put(dev, &encoder->base);
1120 drm_modeset_unlock_all(dev);
1124 EXPORT_SYMBOL(drm_encoder_init);
1127 * drm_encoder_cleanup - cleans up an initialised encoder
1128 * @encoder: encoder to cleanup
1130 * Cleans up the encoder but doesn't free the object.
1132 void drm_encoder_cleanup(struct drm_encoder *encoder)
1134 struct drm_device *dev = encoder->dev;
1136 drm_modeset_lock_all(dev);
1137 drm_mode_object_put(dev, &encoder->base);
1138 kfree(encoder->name);
1139 list_del(&encoder->head);
1140 dev->mode_config.num_encoder--;
1141 drm_modeset_unlock_all(dev);
1143 memset(encoder, 0, sizeof(*encoder));
1145 EXPORT_SYMBOL(drm_encoder_cleanup);
1148 * drm_universal_plane_init - Initialize a new universal plane object
1150 * @plane: plane object to init
1151 * @possible_crtcs: bitmask of possible CRTCs
1152 * @funcs: callbacks for the new plane
1153 * @formats: array of supported formats (%DRM_FORMAT_*)
1154 * @format_count: number of elements in @formats
1155 * @type: type of plane (overlay, primary, cursor)
1156 * @name: printf style format string for the plane name, or NULL for default name
1158 * Initializes a plane object of type @type.
1161 * Zero on success, error code on failure.
1163 int drm_universal_plane_init(struct drm_device *dev, struct drm_plane *plane,
1164 unsigned long possible_crtcs,
1165 const struct drm_plane_funcs *funcs,
1166 const uint32_t *formats, unsigned int format_count,
1167 enum drm_plane_type type,
1168 const char *name, ...)
1170 struct drm_mode_config *config = &dev->mode_config;
1173 ret = drm_mode_object_get(dev, &plane->base, DRM_MODE_OBJECT_PLANE);
1177 drm_modeset_lock_init(&plane->mutex);
1179 plane->base.properties = &plane->properties;
1181 plane->funcs = funcs;
1182 plane->format_types = kmalloc_array(format_count, sizeof(uint32_t),
1184 if (!plane->format_types) {
1185 DRM_DEBUG_KMS("out of memory when allocating plane\n");
1186 drm_mode_object_put(dev, &plane->base);
1190 memcpy(plane->format_types, formats, format_count * sizeof(uint32_t));
1191 plane->format_count = format_count;
1192 plane->possible_crtcs = possible_crtcs;
1195 list_add_tail(&plane->head, &config->plane_list);
1196 config->num_total_plane++;
1197 if (plane->type == DRM_PLANE_TYPE_OVERLAY)
1198 config->num_overlay_plane++;
1200 drm_object_attach_property(&plane->base,
1201 config->plane_type_property,
1204 if (drm_core_check_feature(dev, DRIVER_ATOMIC)) {
1205 drm_object_attach_property(&plane->base, config->prop_fb_id, 0);
1206 drm_object_attach_property(&plane->base, config->prop_crtc_id, 0);
1207 drm_object_attach_property(&plane->base, config->prop_crtc_x, 0);
1208 drm_object_attach_property(&plane->base, config->prop_crtc_y, 0);
1209 drm_object_attach_property(&plane->base, config->prop_crtc_w, 0);
1210 drm_object_attach_property(&plane->base, config->prop_crtc_h, 0);
1211 drm_object_attach_property(&plane->base, config->prop_src_x, 0);
1212 drm_object_attach_property(&plane->base, config->prop_src_y, 0);
1213 drm_object_attach_property(&plane->base, config->prop_src_w, 0);
1214 drm_object_attach_property(&plane->base, config->prop_src_h, 0);
1219 EXPORT_SYMBOL(drm_universal_plane_init);
1222 * drm_plane_init - Initialize a legacy plane
1224 * @plane: plane object to init
1225 * @possible_crtcs: bitmask of possible CRTCs
1226 * @funcs: callbacks for the new plane
1227 * @formats: array of supported formats (%DRM_FORMAT_*)
1228 * @format_count: number of elements in @formats
1229 * @is_primary: plane type (primary vs overlay)
1231 * Legacy API to initialize a DRM plane.
1233 * New drivers should call drm_universal_plane_init() instead.
1236 * Zero on success, error code on failure.
1238 int drm_plane_init(struct drm_device *dev, struct drm_plane *plane,
1239 unsigned long possible_crtcs,
1240 const struct drm_plane_funcs *funcs,
1241 const uint32_t *formats, unsigned int format_count,
1244 enum drm_plane_type type;
1246 type = is_primary ? DRM_PLANE_TYPE_PRIMARY : DRM_PLANE_TYPE_OVERLAY;
1247 return drm_universal_plane_init(dev, plane, possible_crtcs, funcs,
1248 formats, format_count, type, NULL);
1250 EXPORT_SYMBOL(drm_plane_init);
1253 * drm_share_plane_init - Initialize a share plane
1255 * @plane: plane object to init
1256 * @parent: this plane share some resources with parent plane.
1257 * @possible_crtcs: bitmask of possible CRTCs
1258 * @funcs: callbacks for the new plane
1259 * @formats: array of supported formats (%DRM_FORMAT_*)
1260 * @format_count: number of elements in @formats
1261 * @type: type of plane (overlay, primary, cursor)
1263 * With this API, the plane can share hardware resources with other planes.
1265 * --------------------------------------------------
1267 * | ------------------ |
1268 * | | parent plane | |
1269 * | | active scanout | |
1270 * | | | ----------------- |
1271 * | ------------------ | share plane 1 | |
1272 * | ----------------- |active scanout | |
1273 * | | share plane 0 | | | |
1274 * | |active scanout | ----------------- |
1276 * | ----------------- |
1277 * --------------------------------------------------
1284 * The plane hardware is used when the display scanout run into plane active
1285 * scanout, that means we can reuse the plane hardware resources on plane
1286 * non-active scanout.
1288 * Because resource share, There are some limit on share plane: one group
1289 * of share planes need use same zpos, can't not overlap, etc.
1291 * Here assume share plane is a universal plane with some limit flags.
1292 * people who use the share plane need know the limit, should call the ioctl
1293 * DRM_CLIENT_CAP_SHARE_PLANES, and judge the planes limit before use it.
1296 * Zero on success, error code on failure.
1299 int drm_share_plane_init(struct drm_device *dev, struct drm_plane *plane,
1300 struct drm_plane *parent,
1301 unsigned long possible_crtcs,
1302 const struct drm_plane_funcs *funcs,
1303 const uint32_t *formats, unsigned int format_count,
1304 enum drm_plane_type type)
1306 struct drm_mode_config *config = &dev->mode_config;
1311 * TODO: only verified on ATOMIC drm driver.
1313 if (!drm_core_check_feature(dev, DRIVER_ATOMIC))
1316 ret = drm_universal_plane_init(dev, plane, possible_crtcs, funcs,
1317 formats, format_count, type, NULL);
1323 * Can't support more than two level plane share.
1325 WARN_ON(parent->parent);
1326 share_id = parent->base.id;
1327 plane->parent = parent;
1329 config->num_share_plane++;
1330 if (plane->type == DRM_PLANE_TYPE_OVERLAY)
1331 config->num_share_overlay_plane++;
1333 share_id = plane->base.id;
1336 drm_object_attach_property(&plane->base,
1337 config->prop_share_id, share_id);
1340 EXPORT_SYMBOL(drm_share_plane_init);
1343 * drm_plane_cleanup - Clean up the core plane usage
1344 * @plane: plane to cleanup
1346 * This function cleans up @plane and removes it from the DRM mode setting
1347 * core. Note that the function does *not* free the plane structure itself,
1348 * this is the responsibility of the caller.
1350 void drm_plane_cleanup(struct drm_plane *plane)
1352 struct drm_device *dev = plane->dev;
1354 drm_modeset_lock_all(dev);
1355 kfree(plane->format_types);
1356 drm_mode_object_put(dev, &plane->base);
1358 BUG_ON(list_empty(&plane->head));
1360 list_del(&plane->head);
1361 dev->mode_config.num_total_plane--;
1362 if (plane->type == DRM_PLANE_TYPE_OVERLAY)
1363 dev->mode_config.num_overlay_plane--;
1364 if (plane->parent) {
1365 dev->mode_config.num_share_plane--;
1366 if (plane->type == DRM_PLANE_TYPE_OVERLAY)
1367 dev->mode_config.num_share_overlay_plane--;
1369 drm_modeset_unlock_all(dev);
1371 WARN_ON(plane->state && !plane->funcs->atomic_destroy_state);
1372 if (plane->state && plane->funcs->atomic_destroy_state)
1373 plane->funcs->atomic_destroy_state(plane, plane->state);
1375 memset(plane, 0, sizeof(*plane));
1377 EXPORT_SYMBOL(drm_plane_cleanup);
1380 * drm_plane_index - find the index of a registered plane
1381 * @plane: plane to find index for
1383 * Given a registered plane, return the index of that CRTC within a DRM
1384 * device's list of planes.
1386 unsigned int drm_plane_index(struct drm_plane *plane)
1388 unsigned int index = 0;
1389 struct drm_plane *tmp;
1391 drm_for_each_plane(tmp, plane->dev) {
1400 EXPORT_SYMBOL(drm_plane_index);
1403 * drm_plane_from_index - find the registered plane at an index
1405 * @idx: index of registered plane to find for
1407 * Given a plane index, return the registered plane from DRM device's
1408 * list of planes with matching index.
1411 drm_plane_from_index(struct drm_device *dev, int idx)
1413 struct drm_plane *plane;
1416 drm_for_each_plane(plane, dev) {
1423 EXPORT_SYMBOL(drm_plane_from_index);
1426 * drm_plane_force_disable - Forcibly disable a plane
1427 * @plane: plane to disable
1429 * Forces the plane to be disabled.
1431 * Used when the plane's current framebuffer is destroyed,
1432 * and when restoring fbdev mode.
1434 void drm_plane_force_disable(struct drm_plane *plane)
1441 plane->old_fb = plane->fb;
1442 ret = plane->funcs->disable_plane(plane);
1444 DRM_ERROR("failed to disable plane with busy fb\n");
1445 plane->old_fb = NULL;
1448 /* disconnect the plane from the fb and crtc: */
1449 drm_framebuffer_unreference(plane->old_fb);
1450 plane->old_fb = NULL;
1454 EXPORT_SYMBOL(drm_plane_force_disable);
1456 static int drm_mode_create_standard_properties(struct drm_device *dev)
1458 struct drm_property *prop;
1461 * Standard properties (apply to all connectors)
1463 prop = drm_property_create(dev, DRM_MODE_PROP_BLOB |
1464 DRM_MODE_PROP_IMMUTABLE,
1468 dev->mode_config.edid_property = prop;
1470 prop = drm_property_create_enum(dev, 0,
1471 "DPMS", drm_dpms_enum_list,
1472 ARRAY_SIZE(drm_dpms_enum_list));
1475 dev->mode_config.dpms_property = prop;
1477 prop = drm_property_create(dev,
1478 DRM_MODE_PROP_BLOB |
1479 DRM_MODE_PROP_IMMUTABLE,
1483 dev->mode_config.path_property = prop;
1485 prop = drm_property_create(dev,
1486 DRM_MODE_PROP_BLOB |
1487 DRM_MODE_PROP_IMMUTABLE,
1491 dev->mode_config.tile_property = prop;
1493 prop = drm_property_create_enum(dev, DRM_MODE_PROP_IMMUTABLE,
1494 "type", drm_plane_type_enum_list,
1495 ARRAY_SIZE(drm_plane_type_enum_list));
1498 dev->mode_config.plane_type_property = prop;
1500 prop = drm_property_create_range(dev, DRM_MODE_PROP_IMMUTABLE,
1501 "SHARE_ID", 0, UINT_MAX);
1505 dev->mode_config.prop_share_id = prop;
1506 prop = drm_property_create_range(dev, DRM_MODE_PROP_IMMUTABLE,
1507 "SHARE_FLAGS", 0, UINT_MAX);
1510 dev->mode_config.prop_share_flags = prop;
1512 prop = drm_property_create_range(dev, DRM_MODE_PROP_ATOMIC,
1513 "SRC_X", 0, UINT_MAX);
1516 dev->mode_config.prop_src_x = prop;
1518 prop = drm_property_create_range(dev, DRM_MODE_PROP_ATOMIC,
1519 "SRC_Y", 0, UINT_MAX);
1522 dev->mode_config.prop_src_y = prop;
1524 prop = drm_property_create_range(dev, DRM_MODE_PROP_ATOMIC,
1525 "SRC_W", 0, UINT_MAX);
1528 dev->mode_config.prop_src_w = prop;
1530 prop = drm_property_create_range(dev, DRM_MODE_PROP_ATOMIC,
1531 "SRC_H", 0, UINT_MAX);
1534 dev->mode_config.prop_src_h = prop;
1536 prop = drm_property_create_signed_range(dev, DRM_MODE_PROP_ATOMIC,
1537 "CRTC_X", INT_MIN, INT_MAX);
1540 dev->mode_config.prop_crtc_x = prop;
1542 prop = drm_property_create_signed_range(dev, DRM_MODE_PROP_ATOMIC,
1543 "CRTC_Y", INT_MIN, INT_MAX);
1546 dev->mode_config.prop_crtc_y = prop;
1548 prop = drm_property_create_range(dev, DRM_MODE_PROP_ATOMIC,
1549 "CRTC_W", 0, INT_MAX);
1552 dev->mode_config.prop_crtc_w = prop;
1554 prop = drm_property_create_range(dev, DRM_MODE_PROP_ATOMIC,
1555 "CRTC_H", 0, INT_MAX);
1558 dev->mode_config.prop_crtc_h = prop;
1560 prop = drm_property_create_object(dev, DRM_MODE_PROP_ATOMIC,
1561 "FB_ID", DRM_MODE_OBJECT_FB);
1564 dev->mode_config.prop_fb_id = prop;
1566 prop = drm_property_create_object(dev, DRM_MODE_PROP_ATOMIC,
1567 "CRTC_ID", DRM_MODE_OBJECT_CRTC);
1570 dev->mode_config.prop_crtc_id = prop;
1572 prop = drm_property_create_bool(dev, DRM_MODE_PROP_ATOMIC,
1576 dev->mode_config.prop_active = prop;
1578 prop = drm_property_create(dev,
1579 DRM_MODE_PROP_ATOMIC | DRM_MODE_PROP_BLOB,
1583 dev->mode_config.prop_mode_id = prop;
1589 * drm_mode_create_dvi_i_properties - create DVI-I specific connector properties
1592 * Called by a driver the first time a DVI-I connector is made.
1594 int drm_mode_create_dvi_i_properties(struct drm_device *dev)
1596 struct drm_property *dvi_i_selector;
1597 struct drm_property *dvi_i_subconnector;
1599 if (dev->mode_config.dvi_i_select_subconnector_property)
1603 drm_property_create_enum(dev, 0,
1604 "select subconnector",
1605 drm_dvi_i_select_enum_list,
1606 ARRAY_SIZE(drm_dvi_i_select_enum_list));
1607 dev->mode_config.dvi_i_select_subconnector_property = dvi_i_selector;
1609 dvi_i_subconnector = drm_property_create_enum(dev, DRM_MODE_PROP_IMMUTABLE,
1611 drm_dvi_i_subconnector_enum_list,
1612 ARRAY_SIZE(drm_dvi_i_subconnector_enum_list));
1613 dev->mode_config.dvi_i_subconnector_property = dvi_i_subconnector;
1617 EXPORT_SYMBOL(drm_mode_create_dvi_i_properties);
1620 * drm_create_tv_properties - create TV specific connector properties
1622 * @num_modes: number of different TV formats (modes) supported
1623 * @modes: array of pointers to strings containing name of each format
1625 * Called by a driver's TV initialization routine, this function creates
1626 * the TV specific connector properties for a given device. Caller is
1627 * responsible for allocating a list of format names and passing them to
1630 int drm_mode_create_tv_properties(struct drm_device *dev,
1631 unsigned int num_modes,
1632 const char * const modes[])
1634 struct drm_property *tv_selector;
1635 struct drm_property *tv_subconnector;
1638 if (dev->mode_config.tv_select_subconnector_property)
1642 * Basic connector properties
1644 tv_selector = drm_property_create_enum(dev, 0,
1645 "select subconnector",
1646 drm_tv_select_enum_list,
1647 ARRAY_SIZE(drm_tv_select_enum_list));
1651 dev->mode_config.tv_select_subconnector_property = tv_selector;
1654 drm_property_create_enum(dev, DRM_MODE_PROP_IMMUTABLE,
1656 drm_tv_subconnector_enum_list,
1657 ARRAY_SIZE(drm_tv_subconnector_enum_list));
1658 if (!tv_subconnector)
1660 dev->mode_config.tv_subconnector_property = tv_subconnector;
1663 * Other, TV specific properties: margins & TV modes.
1665 dev->mode_config.tv_left_margin_property =
1666 drm_property_create_range(dev, 0, "left margin", 0, 100);
1667 if (!dev->mode_config.tv_left_margin_property)
1670 dev->mode_config.tv_right_margin_property =
1671 drm_property_create_range(dev, 0, "right margin", 0, 100);
1672 if (!dev->mode_config.tv_right_margin_property)
1675 dev->mode_config.tv_top_margin_property =
1676 drm_property_create_range(dev, 0, "top margin", 0, 100);
1677 if (!dev->mode_config.tv_top_margin_property)
1680 dev->mode_config.tv_bottom_margin_property =
1681 drm_property_create_range(dev, 0, "bottom margin", 0, 100);
1682 if (!dev->mode_config.tv_bottom_margin_property)
1685 dev->mode_config.tv_mode_property =
1686 drm_property_create(dev, DRM_MODE_PROP_ENUM,
1688 if (!dev->mode_config.tv_mode_property)
1691 for (i = 0; i < num_modes; i++)
1692 drm_property_add_enum(dev->mode_config.tv_mode_property, i,
1695 dev->mode_config.tv_brightness_property =
1696 drm_property_create_range(dev, 0, "brightness", 0, 100);
1697 if (!dev->mode_config.tv_brightness_property)
1700 dev->mode_config.tv_contrast_property =
1701 drm_property_create_range(dev, 0, "contrast", 0, 100);
1702 if (!dev->mode_config.tv_contrast_property)
1705 dev->mode_config.tv_flicker_reduction_property =
1706 drm_property_create_range(dev, 0, "flicker reduction", 0, 100);
1707 if (!dev->mode_config.tv_flicker_reduction_property)
1710 dev->mode_config.tv_overscan_property =
1711 drm_property_create_range(dev, 0, "overscan", 0, 100);
1712 if (!dev->mode_config.tv_overscan_property)
1715 dev->mode_config.tv_saturation_property =
1716 drm_property_create_range(dev, 0, "saturation", 0, 100);
1717 if (!dev->mode_config.tv_saturation_property)
1720 dev->mode_config.tv_hue_property =
1721 drm_property_create_range(dev, 0, "hue", 0, 100);
1722 if (!dev->mode_config.tv_hue_property)
1729 EXPORT_SYMBOL(drm_mode_create_tv_properties);
1732 * drm_mode_create_scaling_mode_property - create scaling mode property
1735 * Called by a driver the first time it's needed, must be attached to desired
1738 int drm_mode_create_scaling_mode_property(struct drm_device *dev)
1740 struct drm_property *scaling_mode;
1742 if (dev->mode_config.scaling_mode_property)
1746 drm_property_create_enum(dev, 0, "scaling mode",
1747 drm_scaling_mode_enum_list,
1748 ARRAY_SIZE(drm_scaling_mode_enum_list));
1750 dev->mode_config.scaling_mode_property = scaling_mode;
1754 EXPORT_SYMBOL(drm_mode_create_scaling_mode_property);
1757 * drm_mode_create_aspect_ratio_property - create aspect ratio property
1760 * Called by a driver the first time it's needed, must be attached to desired
1764 * Zero on success, negative errno on failure.
1766 int drm_mode_create_aspect_ratio_property(struct drm_device *dev)
1768 if (dev->mode_config.aspect_ratio_property)
1771 dev->mode_config.aspect_ratio_property =
1772 drm_property_create_enum(dev, 0, "aspect ratio",
1773 drm_aspect_ratio_enum_list,
1774 ARRAY_SIZE(drm_aspect_ratio_enum_list));
1776 if (dev->mode_config.aspect_ratio_property == NULL)
1781 EXPORT_SYMBOL(drm_mode_create_aspect_ratio_property);
1784 * drm_mode_create_dirty_property - create dirty property
1787 * Called by a driver the first time it's needed, must be attached to desired
1790 int drm_mode_create_dirty_info_property(struct drm_device *dev)
1792 struct drm_property *dirty_info;
1794 if (dev->mode_config.dirty_info_property)
1798 drm_property_create_enum(dev, DRM_MODE_PROP_IMMUTABLE,
1800 drm_dirty_info_enum_list,
1801 ARRAY_SIZE(drm_dirty_info_enum_list));
1802 dev->mode_config.dirty_info_property = dirty_info;
1806 EXPORT_SYMBOL(drm_mode_create_dirty_info_property);
1809 * drm_mode_create_suggested_offset_properties - create suggests offset properties
1812 * Create the the suggested x/y offset property for connectors.
1814 int drm_mode_create_suggested_offset_properties(struct drm_device *dev)
1816 if (dev->mode_config.suggested_x_property && dev->mode_config.suggested_y_property)
1819 dev->mode_config.suggested_x_property =
1820 drm_property_create_range(dev, DRM_MODE_PROP_IMMUTABLE, "suggested X", 0, 0xffffffff);
1822 dev->mode_config.suggested_y_property =
1823 drm_property_create_range(dev, DRM_MODE_PROP_IMMUTABLE, "suggested Y", 0, 0xffffffff);
1825 if (dev->mode_config.suggested_x_property == NULL ||
1826 dev->mode_config.suggested_y_property == NULL)
1830 EXPORT_SYMBOL(drm_mode_create_suggested_offset_properties);
1833 * drm_mode_getresources - get graphics configuration
1834 * @dev: drm device for the ioctl
1835 * @data: data pointer for the ioctl
1836 * @file_priv: drm file for the ioctl call
1838 * Construct a set of configuration description structures and return
1839 * them to the user, including CRTC, connector and framebuffer configuration.
1841 * Called by the user via ioctl.
1844 * Zero on success, negative errno on failure.
1846 int drm_mode_getresources(struct drm_device *dev, void *data,
1847 struct drm_file *file_priv)
1849 struct drm_mode_card_res *card_res = data;
1850 struct list_head *lh;
1851 struct drm_framebuffer *fb;
1852 struct drm_connector *connector;
1853 struct drm_crtc *crtc;
1854 struct drm_encoder *encoder;
1856 int connector_count = 0;
1859 int encoder_count = 0;
1861 uint32_t __user *fb_id;
1862 uint32_t __user *crtc_id;
1863 uint32_t __user *connector_id;
1864 uint32_t __user *encoder_id;
1866 if (!drm_core_check_feature(dev, DRIVER_MODESET))
1870 mutex_lock(&file_priv->fbs_lock);
1872 * For the non-control nodes we need to limit the list of resources
1873 * by IDs in the group list for this node
1875 list_for_each(lh, &file_priv->fbs)
1878 /* handle this in 4 parts */
1880 if (card_res->count_fbs >= fb_count) {
1882 fb_id = (uint32_t __user *)(unsigned long)card_res->fb_id_ptr;
1883 list_for_each_entry(fb, &file_priv->fbs, filp_head) {
1884 if (put_user(fb->base.id, fb_id + copied)) {
1885 mutex_unlock(&file_priv->fbs_lock);
1891 card_res->count_fbs = fb_count;
1892 mutex_unlock(&file_priv->fbs_lock);
1894 /* mode_config.mutex protects the connector list against e.g. DP MST
1895 * connector hot-adding. CRTC/Plane lists are invariant. */
1896 mutex_lock(&dev->mode_config.mutex);
1897 drm_for_each_crtc(crtc, dev)
1900 drm_for_each_connector(connector, dev)
1903 drm_for_each_encoder(encoder, dev)
1906 card_res->max_height = dev->mode_config.max_height;
1907 card_res->min_height = dev->mode_config.min_height;
1908 card_res->max_width = dev->mode_config.max_width;
1909 card_res->min_width = dev->mode_config.min_width;
1912 if (card_res->count_crtcs >= crtc_count) {
1914 crtc_id = (uint32_t __user *)(unsigned long)card_res->crtc_id_ptr;
1915 drm_for_each_crtc(crtc, dev) {
1916 DRM_DEBUG_KMS("[CRTC:%d]\n", crtc->base.id);
1917 if (put_user(crtc->base.id, crtc_id + copied)) {
1924 card_res->count_crtcs = crtc_count;
1927 if (card_res->count_encoders >= encoder_count) {
1929 encoder_id = (uint32_t __user *)(unsigned long)card_res->encoder_id_ptr;
1930 drm_for_each_encoder(encoder, dev) {
1931 DRM_DEBUG_KMS("[ENCODER:%d:%s]\n", encoder->base.id,
1933 if (put_user(encoder->base.id, encoder_id +
1941 card_res->count_encoders = encoder_count;
1944 if (card_res->count_connectors >= connector_count) {
1946 connector_id = (uint32_t __user *)(unsigned long)card_res->connector_id_ptr;
1947 drm_for_each_connector(connector, dev) {
1948 DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n",
1951 if (put_user(connector->base.id,
1952 connector_id + copied)) {
1959 card_res->count_connectors = connector_count;
1961 DRM_DEBUG_KMS("CRTC[%d] CONNECTORS[%d] ENCODERS[%d]\n", card_res->count_crtcs,
1962 card_res->count_connectors, card_res->count_encoders);
1965 mutex_unlock(&dev->mode_config.mutex);
1970 * drm_mode_getcrtc - get CRTC configuration
1971 * @dev: drm device for the ioctl
1972 * @data: data pointer for the ioctl
1973 * @file_priv: drm file for the ioctl call
1975 * Construct a CRTC configuration structure to return to the user.
1977 * Called by the user via ioctl.
1980 * Zero on success, negative errno on failure.
1982 int drm_mode_getcrtc(struct drm_device *dev,
1983 void *data, struct drm_file *file_priv)
1985 struct drm_mode_crtc *crtc_resp = data;
1986 struct drm_crtc *crtc;
1988 if (!drm_core_check_feature(dev, DRIVER_MODESET))
1991 crtc = drm_crtc_find(dev, crtc_resp->crtc_id);
1995 drm_modeset_lock_crtc(crtc, crtc->primary);
1996 crtc_resp->gamma_size = crtc->gamma_size;
1997 if (crtc->primary->fb)
1998 crtc_resp->fb_id = crtc->primary->fb->base.id;
2000 crtc_resp->fb_id = 0;
2003 crtc_resp->x = crtc->primary->state->src_x >> 16;
2004 crtc_resp->y = crtc->primary->state->src_y >> 16;
2005 if (crtc->state->enable) {
2006 drm_mode_convert_to_umode(&crtc_resp->mode, &crtc->state->mode);
2007 crtc_resp->mode_valid = 1;
2010 crtc_resp->mode_valid = 0;
2013 crtc_resp->x = crtc->x;
2014 crtc_resp->y = crtc->y;
2015 if (crtc->enabled) {
2016 drm_mode_convert_to_umode(&crtc_resp->mode, &crtc->mode);
2017 crtc_resp->mode_valid = 1;
2020 crtc_resp->mode_valid = 0;
2023 drm_modeset_unlock_crtc(crtc);
2028 static bool drm_mode_expose_to_userspace(const struct drm_display_mode *mode,
2029 const struct drm_file *file_priv)
2032 * If user-space hasn't configured the driver to expose the stereo 3D
2033 * modes, don't expose them.
2035 if (!file_priv->stereo_allowed && drm_mode_is_stereo(mode))
2041 static struct drm_encoder *drm_connector_get_encoder(struct drm_connector *connector)
2043 /* For atomic drivers only state objects are synchronously updated and
2044 * protected by modeset locks, so check those first. */
2045 if (connector->state)
2046 return connector->state->best_encoder;
2047 return connector->encoder;
2050 /* helper for getconnector and getproperties ioctls */
2051 static int get_properties(struct drm_mode_object *obj, bool atomic,
2052 uint32_t __user *prop_ptr, uint64_t __user *prop_values,
2053 uint32_t *arg_count_props)
2058 props_count = obj->properties->count;
2060 props_count -= obj->properties->atomic_count;
2062 if ((*arg_count_props >= props_count) && props_count) {
2063 for (i = 0, copied = 0; copied < props_count; i++) {
2064 struct drm_property *prop = obj->properties->properties[i];
2067 if ((prop->flags & DRM_MODE_PROP_ATOMIC) && !atomic)
2070 ret = drm_object_property_get_value(obj, prop, &val);
2074 if (put_user(prop->base.id, prop_ptr + copied))
2077 if (put_user(val, prop_values + copied))
2083 *arg_count_props = props_count;
2089 * drm_mode_getconnector - get connector configuration
2090 * @dev: drm device for the ioctl
2091 * @data: data pointer for the ioctl
2092 * @file_priv: drm file for the ioctl call
2094 * Construct a connector configuration structure to return to the user.
2096 * Called by the user via ioctl.
2099 * Zero on success, negative errno on failure.
2101 int drm_mode_getconnector(struct drm_device *dev, void *data,
2102 struct drm_file *file_priv)
2104 struct drm_mode_get_connector *out_resp = data;
2105 struct drm_connector *connector;
2106 struct drm_encoder *encoder;
2107 struct drm_display_mode *mode;
2109 int encoders_count = 0;
2113 struct drm_mode_modeinfo u_mode;
2114 struct drm_mode_modeinfo __user *mode_ptr;
2115 uint32_t __user *encoder_ptr;
2117 if (!drm_core_check_feature(dev, DRIVER_MODESET))
2120 memset(&u_mode, 0, sizeof(struct drm_mode_modeinfo));
2122 DRM_DEBUG_KMS("[CONNECTOR:%d:?]\n", out_resp->connector_id);
2124 mutex_lock(&dev->mode_config.mutex);
2126 connector = drm_connector_find(dev, out_resp->connector_id);
2132 for (i = 0; i < DRM_CONNECTOR_MAX_ENCODER; i++)
2133 if (connector->encoder_ids[i] != 0)
2136 if (out_resp->count_modes == 0) {
2137 connector->funcs->fill_modes(connector,
2138 dev->mode_config.max_width,
2139 dev->mode_config.max_height);
2142 /* delayed so we get modes regardless of pre-fill_modes state */
2143 list_for_each_entry(mode, &connector->modes, head)
2144 if (drm_mode_expose_to_userspace(mode, file_priv))
2147 out_resp->connector_id = connector->base.id;
2148 out_resp->connector_type = connector->connector_type;
2149 out_resp->connector_type_id = connector->connector_type_id;
2150 out_resp->mm_width = connector->display_info.width_mm;
2151 out_resp->mm_height = connector->display_info.height_mm;
2152 out_resp->subpixel = connector->display_info.subpixel_order;
2153 out_resp->connection = connector->status;
2155 drm_modeset_lock(&dev->mode_config.connection_mutex, NULL);
2156 encoder = drm_connector_get_encoder(connector);
2158 out_resp->encoder_id = encoder->base.id;
2160 out_resp->encoder_id = 0;
2163 * This ioctl is called twice, once to determine how much space is
2164 * needed, and the 2nd time to fill it.
2166 if ((out_resp->count_modes >= mode_count) && mode_count) {
2168 mode_ptr = (struct drm_mode_modeinfo __user *)(unsigned long)out_resp->modes_ptr;
2169 list_for_each_entry(mode, &connector->modes, head) {
2170 if (!drm_mode_expose_to_userspace(mode, file_priv))
2173 drm_mode_convert_to_umode(&u_mode, mode);
2174 if (copy_to_user(mode_ptr + copied,
2175 &u_mode, sizeof(u_mode))) {
2182 out_resp->count_modes = mode_count;
2184 ret = get_properties(&connector->base, file_priv->atomic,
2185 (uint32_t __user *)(unsigned long)(out_resp->props_ptr),
2186 (uint64_t __user *)(unsigned long)(out_resp->prop_values_ptr),
2187 &out_resp->count_props);
2191 if ((out_resp->count_encoders >= encoders_count) && encoders_count) {
2193 encoder_ptr = (uint32_t __user *)(unsigned long)(out_resp->encoders_ptr);
2194 for (i = 0; i < DRM_CONNECTOR_MAX_ENCODER; i++) {
2195 if (connector->encoder_ids[i] != 0) {
2196 if (put_user(connector->encoder_ids[i],
2197 encoder_ptr + copied)) {
2205 out_resp->count_encoders = encoders_count;
2208 drm_modeset_unlock(&dev->mode_config.connection_mutex);
2211 mutex_unlock(&dev->mode_config.mutex);
2216 static struct drm_crtc *drm_encoder_get_crtc(struct drm_encoder *encoder)
2218 struct drm_connector *connector;
2219 struct drm_device *dev = encoder->dev;
2220 bool uses_atomic = false;
2222 /* For atomic drivers only state objects are synchronously updated and
2223 * protected by modeset locks, so check those first. */
2224 drm_for_each_connector(connector, dev) {
2225 if (!connector->state)
2230 if (connector->state->best_encoder != encoder)
2233 return connector->state->crtc;
2236 /* Don't return stale data (e.g. pending async disable). */
2240 return encoder->crtc;
2244 * drm_mode_getencoder - get encoder configuration
2245 * @dev: drm device for the ioctl
2246 * @data: data pointer for the ioctl
2247 * @file_priv: drm file for the ioctl call
2249 * Construct a encoder configuration structure to return to the user.
2251 * Called by the user via ioctl.
2254 * Zero on success, negative errno on failure.
2256 int drm_mode_getencoder(struct drm_device *dev, void *data,
2257 struct drm_file *file_priv)
2259 struct drm_mode_get_encoder *enc_resp = data;
2260 struct drm_encoder *encoder;
2261 struct drm_crtc *crtc;
2263 if (!drm_core_check_feature(dev, DRIVER_MODESET))
2266 encoder = drm_encoder_find(dev, enc_resp->encoder_id);
2270 drm_modeset_lock(&dev->mode_config.connection_mutex, NULL);
2271 crtc = drm_encoder_get_crtc(encoder);
2273 enc_resp->crtc_id = crtc->base.id;
2275 enc_resp->crtc_id = 0;
2276 drm_modeset_unlock(&dev->mode_config.connection_mutex);
2278 enc_resp->encoder_type = encoder->encoder_type;
2279 enc_resp->encoder_id = encoder->base.id;
2280 enc_resp->possible_crtcs = encoder->possible_crtcs;
2281 enc_resp->possible_clones = encoder->possible_clones;
2287 * drm_mode_getplane_res - enumerate all plane resources
2290 * @file_priv: DRM file info
2292 * Construct a list of plane ids to return to the user.
2294 * Called by the user via ioctl.
2297 * Zero on success, negative errno on failure.
2299 int drm_mode_getplane_res(struct drm_device *dev, void *data,
2300 struct drm_file *file_priv)
2302 struct drm_mode_get_plane_res *plane_resp = data;
2303 struct drm_mode_config *config;
2304 struct drm_plane *plane;
2305 uint32_t __user *plane_ptr;
2307 unsigned num_planes;
2309 if (!drm_core_check_feature(dev, DRIVER_MODESET))
2312 config = &dev->mode_config;
2314 if (file_priv->universal_planes)
2315 num_planes = config->num_total_plane;
2317 num_planes = config->num_overlay_plane;
2318 if (!file_priv->share_planes) {
2319 if (file_priv->universal_planes)
2320 num_planes -= config->num_share_plane;
2322 num_planes -= config->num_share_overlay_plane;
2326 * This ioctl is called twice, once to determine how much space is
2327 * needed, and the 2nd time to fill it.
2330 (plane_resp->count_planes >= num_planes)) {
2331 plane_ptr = (uint32_t __user *)(unsigned long)plane_resp->plane_id_ptr;
2333 /* Plane lists are invariant, no locking needed. */
2334 drm_for_each_plane(plane, dev) {
2336 * Unless userspace set the 'universal planes'
2337 * capability bit, only advertise overlays.
2339 if (plane->type != DRM_PLANE_TYPE_OVERLAY &&
2340 !file_priv->universal_planes)
2342 if (plane->parent && !file_priv->share_planes)
2345 if (put_user(plane->base.id, plane_ptr + copied))
2350 plane_resp->count_planes = num_planes;
2356 * drm_mode_getplane - get plane configuration
2359 * @file_priv: DRM file info
2361 * Construct a plane configuration structure to return to the user.
2363 * Called by the user via ioctl.
2366 * Zero on success, negative errno on failure.
2368 int drm_mode_getplane(struct drm_device *dev, void *data,
2369 struct drm_file *file_priv)
2371 struct drm_mode_get_plane *plane_resp = data;
2372 struct drm_plane *plane;
2373 uint32_t __user *format_ptr;
2375 if (!drm_core_check_feature(dev, DRIVER_MODESET))
2378 plane = drm_plane_find(dev, plane_resp->plane_id);
2382 drm_modeset_lock(&plane->mutex, NULL);
2384 plane_resp->crtc_id = plane->crtc->base.id;
2386 plane_resp->crtc_id = 0;
2389 plane_resp->fb_id = plane->fb->base.id;
2391 plane_resp->fb_id = 0;
2392 drm_modeset_unlock(&plane->mutex);
2394 plane_resp->plane_id = plane->base.id;
2395 plane_resp->possible_crtcs = plane->possible_crtcs;
2396 plane_resp->gamma_size = 0;
2399 * This ioctl is called twice, once to determine how much space is
2400 * needed, and the 2nd time to fill it.
2402 if (plane->format_count &&
2403 (plane_resp->count_format_types >= plane->format_count)) {
2404 format_ptr = (uint32_t __user *)(unsigned long)plane_resp->format_type_ptr;
2405 if (copy_to_user(format_ptr,
2406 plane->format_types,
2407 sizeof(uint32_t) * plane->format_count)) {
2411 plane_resp->count_format_types = plane->format_count;
2417 * drm_plane_check_pixel_format - Check if the plane supports the pixel format
2418 * @plane: plane to check for format support
2419 * @format: the pixel format
2422 * Zero of @plane has @format in its list of supported pixel formats, -EINVAL
2425 int drm_plane_check_pixel_format(const struct drm_plane *plane, u32 format)
2429 for (i = 0; i < plane->format_count; i++) {
2430 if (format == plane->format_types[i])
2437 static int check_src_coords(uint32_t src_x, uint32_t src_y,
2438 uint32_t src_w, uint32_t src_h,
2439 const struct drm_framebuffer *fb)
2441 unsigned int fb_width, fb_height;
2443 fb_width = fb->width << 16;
2444 fb_height = fb->height << 16;
2446 /* Make sure source coordinates are inside the fb. */
2447 if (src_w > fb_width ||
2448 src_x > fb_width - src_w ||
2449 src_h > fb_height ||
2450 src_y > fb_height - src_h) {
2451 DRM_DEBUG_KMS("Invalid source coordinates "
2452 "%u.%06ux%u.%06u+%u.%06u+%u.%06u\n",
2453 src_w >> 16, ((src_w & 0xffff) * 15625) >> 10,
2454 src_h >> 16, ((src_h & 0xffff) * 15625) >> 10,
2455 src_x >> 16, ((src_x & 0xffff) * 15625) >> 10,
2456 src_y >> 16, ((src_y & 0xffff) * 15625) >> 10);
2464 * setplane_internal - setplane handler for internal callers
2466 * Note that we assume an extra reference has already been taken on fb. If the
2467 * update fails, this reference will be dropped before return; if it succeeds,
2468 * the previous framebuffer (if any) will be unreferenced instead.
2470 * src_{x,y,w,h} are provided in 16.16 fixed point format
2472 static int __setplane_internal(struct drm_plane *plane,
2473 struct drm_crtc *crtc,
2474 struct drm_framebuffer *fb,
2475 int32_t crtc_x, int32_t crtc_y,
2476 uint32_t crtc_w, uint32_t crtc_h,
2477 /* src_{x,y,w,h} values are 16.16 fixed point */
2478 uint32_t src_x, uint32_t src_y,
2479 uint32_t src_w, uint32_t src_h)
2483 /* No fb means shut it down */
2485 plane->old_fb = plane->fb;
2486 ret = plane->funcs->disable_plane(plane);
2491 plane->old_fb = NULL;
2496 /* Check whether this plane is usable on this CRTC */
2497 if (!(plane->possible_crtcs & drm_crtc_mask(crtc))) {
2498 DRM_DEBUG_KMS("Invalid crtc for plane\n");
2503 /* Check whether this plane supports the fb pixel format. */
2504 ret = drm_plane_check_pixel_format(plane, fb->pixel_format);
2506 DRM_DEBUG_KMS("Invalid pixel format %s\n",
2507 drm_get_format_name(fb->pixel_format));
2511 /* Give drivers some help against integer overflows */
2512 if (crtc_w > INT_MAX ||
2513 crtc_x > INT_MAX - (int32_t) crtc_w ||
2515 crtc_y > INT_MAX - (int32_t) crtc_h) {
2516 DRM_DEBUG_KMS("Invalid CRTC coordinates %ux%u+%d+%d\n",
2517 crtc_w, crtc_h, crtc_x, crtc_y);
2522 ret = check_src_coords(src_x, src_y, src_w, src_h, fb);
2526 plane->old_fb = plane->fb;
2527 ret = plane->funcs->update_plane(plane, crtc, fb,
2528 crtc_x, crtc_y, crtc_w, crtc_h,
2529 src_x, src_y, src_w, src_h);
2535 plane->old_fb = NULL;
2540 drm_framebuffer_unreference(fb);
2542 drm_framebuffer_unreference(plane->old_fb);
2543 plane->old_fb = NULL;
2548 static int setplane_internal(struct drm_plane *plane,
2549 struct drm_crtc *crtc,
2550 struct drm_framebuffer *fb,
2551 int32_t crtc_x, int32_t crtc_y,
2552 uint32_t crtc_w, uint32_t crtc_h,
2553 /* src_{x,y,w,h} values are 16.16 fixed point */
2554 uint32_t src_x, uint32_t src_y,
2555 uint32_t src_w, uint32_t src_h)
2559 drm_modeset_lock_all(plane->dev);
2560 ret = __setplane_internal(plane, crtc, fb,
2561 crtc_x, crtc_y, crtc_w, crtc_h,
2562 src_x, src_y, src_w, src_h);
2563 drm_modeset_unlock_all(plane->dev);
2569 * drm_mode_setplane - configure a plane's configuration
2571 * @data: ioctl data*
2572 * @file_priv: DRM file info
2574 * Set plane configuration, including placement, fb, scaling, and other factors.
2575 * Or pass a NULL fb to disable (planes may be disabled without providing a
2579 * Zero on success, negative errno on failure.
2581 int drm_mode_setplane(struct drm_device *dev, void *data,
2582 struct drm_file *file_priv)
2584 struct drm_mode_set_plane *plane_req = data;
2585 struct drm_plane *plane;
2586 struct drm_crtc *crtc = NULL;
2587 struct drm_framebuffer *fb = NULL;
2589 if (!drm_core_check_feature(dev, DRIVER_MODESET))
2593 * First, find the plane, crtc, and fb objects. If not available,
2594 * we don't bother to call the driver.
2596 plane = drm_plane_find(dev, plane_req->plane_id);
2598 DRM_DEBUG_KMS("Unknown plane ID %d\n",
2599 plane_req->plane_id);
2603 if (plane_req->fb_id) {
2604 fb = drm_framebuffer_lookup(dev, plane_req->fb_id);
2606 DRM_DEBUG_KMS("Unknown framebuffer ID %d\n",
2611 crtc = drm_crtc_find(dev, plane_req->crtc_id);
2613 DRM_DEBUG_KMS("Unknown crtc ID %d\n",
2614 plane_req->crtc_id);
2620 * setplane_internal will take care of deref'ing either the old or new
2621 * framebuffer depending on success.
2623 return setplane_internal(plane, crtc, fb,
2624 plane_req->crtc_x, plane_req->crtc_y,
2625 plane_req->crtc_w, plane_req->crtc_h,
2626 plane_req->src_x, plane_req->src_y,
2627 plane_req->src_w, plane_req->src_h);
2631 * drm_mode_set_config_internal - helper to call ->set_config
2632 * @set: modeset config to set
2634 * This is a little helper to wrap internal calls to the ->set_config driver
2635 * interface. The only thing it adds is correct refcounting dance.
2638 * Zero on success, negative errno on failure.
2640 int drm_mode_set_config_internal(struct drm_mode_set *set)
2642 struct drm_crtc *crtc = set->crtc;
2643 struct drm_framebuffer *fb;
2644 struct drm_crtc *tmp;
2648 * NOTE: ->set_config can also disable other crtcs (if we steal all
2649 * connectors from it), hence we need to refcount the fbs across all
2650 * crtcs. Atomic modeset will have saner semantics ...
2652 drm_for_each_crtc(tmp, crtc->dev)
2653 tmp->primary->old_fb = tmp->primary->fb;
2657 ret = crtc->funcs->set_config(set);
2659 crtc->primary->crtc = crtc;
2660 crtc->primary->fb = fb;
2663 drm_for_each_crtc(tmp, crtc->dev) {
2664 if (tmp->primary->fb)
2665 drm_framebuffer_reference(tmp->primary->fb);
2666 if (tmp->primary->old_fb)
2667 drm_framebuffer_unreference(tmp->primary->old_fb);
2668 tmp->primary->old_fb = NULL;
2673 EXPORT_SYMBOL(drm_mode_set_config_internal);
2676 * drm_crtc_get_hv_timing - Fetches hdisplay/vdisplay for given mode
2677 * @mode: mode to query
2678 * @hdisplay: hdisplay value to fill in
2679 * @vdisplay: vdisplay value to fill in
2681 * The vdisplay value will be doubled if the specified mode is a stereo mode of
2682 * the appropriate layout.
2684 void drm_crtc_get_hv_timing(const struct drm_display_mode *mode,
2685 int *hdisplay, int *vdisplay)
2687 struct drm_display_mode adjusted;
2689 drm_mode_copy(&adjusted, mode);
2690 drm_mode_set_crtcinfo(&adjusted, CRTC_STEREO_DOUBLE_ONLY);
2691 *hdisplay = adjusted.crtc_hdisplay;
2692 *vdisplay = adjusted.crtc_vdisplay;
2694 EXPORT_SYMBOL(drm_crtc_get_hv_timing);
2697 * drm_crtc_check_viewport - Checks that a framebuffer is big enough for the
2699 * @crtc: CRTC that framebuffer will be displayed on
2702 * @mode: mode that framebuffer will be displayed under
2703 * @fb: framebuffer to check size of
2705 int drm_crtc_check_viewport(const struct drm_crtc *crtc,
2707 const struct drm_display_mode *mode,
2708 const struct drm_framebuffer *fb)
2711 int hdisplay, vdisplay;
2713 drm_crtc_get_hv_timing(mode, &hdisplay, &vdisplay);
2716 crtc->primary->state->rotation & (BIT(DRM_ROTATE_90) |
2717 BIT(DRM_ROTATE_270)))
2718 swap(hdisplay, vdisplay);
2720 return check_src_coords(x << 16, y << 16,
2721 hdisplay << 16, vdisplay << 16, fb);
2723 EXPORT_SYMBOL(drm_crtc_check_viewport);
2726 * drm_mode_setcrtc - set CRTC configuration
2727 * @dev: drm device for the ioctl
2728 * @data: data pointer for the ioctl
2729 * @file_priv: drm file for the ioctl call
2731 * Build a new CRTC configuration based on user request.
2733 * Called by the user via ioctl.
2736 * Zero on success, negative errno on failure.
2738 int drm_mode_setcrtc(struct drm_device *dev, void *data,
2739 struct drm_file *file_priv)
2741 struct drm_mode_config *config = &dev->mode_config;
2742 struct drm_mode_crtc *crtc_req = data;
2743 struct drm_crtc *crtc;
2744 struct drm_connector **connector_set = NULL, *connector;
2745 struct drm_framebuffer *fb = NULL;
2746 struct drm_display_mode *mode = NULL;
2747 struct drm_mode_set set;
2748 uint32_t __user *set_connectors_ptr;
2752 if (!drm_core_check_feature(dev, DRIVER_MODESET))
2756 * Universal plane src offsets are only 16.16, prevent havoc for
2757 * drivers using universal plane code internally.
2759 if (crtc_req->x & 0xffff0000 || crtc_req->y & 0xffff0000)
2762 drm_modeset_lock_all(dev);
2763 crtc = drm_crtc_find(dev, crtc_req->crtc_id);
2765 DRM_DEBUG_KMS("Unknown CRTC ID %d\n", crtc_req->crtc_id);
2769 DRM_DEBUG_KMS("[CRTC:%d]\n", crtc->base.id);
2771 if (crtc_req->mode_valid) {
2772 /* If we have a mode we need a framebuffer. */
2773 /* If we pass -1, set the mode with the currently bound fb */
2774 if (crtc_req->fb_id == -1) {
2775 if (!crtc->primary->fb) {
2776 DRM_DEBUG_KMS("CRTC doesn't have current FB\n");
2780 fb = crtc->primary->fb;
2781 /* Make refcounting symmetric with the lookup path. */
2782 drm_framebuffer_reference(fb);
2784 fb = drm_framebuffer_lookup(dev, crtc_req->fb_id);
2786 DRM_DEBUG_KMS("Unknown FB ID%d\n",
2793 mode = drm_mode_create(dev);
2799 ret = drm_mode_convert_umode(mode, &crtc_req->mode);
2801 DRM_DEBUG_KMS("Invalid mode\n");
2805 drm_mode_set_crtcinfo(mode, CRTC_INTERLACE_HALVE_V);
2808 * Check whether the primary plane supports the fb pixel format.
2809 * Drivers not implementing the universal planes API use a
2810 * default formats list provided by the DRM core which doesn't
2811 * match real hardware capabilities. Skip the check in that
2814 if (!crtc->primary->format_default) {
2815 ret = drm_plane_check_pixel_format(crtc->primary,
2818 DRM_DEBUG_KMS("Invalid pixel format %s\n",
2819 drm_get_format_name(fb->pixel_format));
2824 ret = drm_crtc_check_viewport(crtc, crtc_req->x, crtc_req->y,
2831 if (crtc_req->count_connectors == 0 && mode) {
2832 DRM_DEBUG_KMS("Count connectors is 0 but mode set\n");
2837 if (crtc_req->count_connectors > 0 && (!mode || !fb)) {
2838 DRM_DEBUG_KMS("Count connectors is %d but no mode or fb set\n",
2839 crtc_req->count_connectors);
2844 if (crtc_req->count_connectors > 0) {
2847 /* Avoid unbounded kernel memory allocation */
2848 if (crtc_req->count_connectors > config->num_connector) {
2853 connector_set = kmalloc_array(crtc_req->count_connectors,
2854 sizeof(struct drm_connector *),
2856 if (!connector_set) {
2861 for (i = 0; i < crtc_req->count_connectors; i++) {
2862 set_connectors_ptr = (uint32_t __user *)(unsigned long)crtc_req->set_connectors_ptr;
2863 if (get_user(out_id, &set_connectors_ptr[i])) {
2868 connector = drm_connector_find(dev, out_id);
2870 DRM_DEBUG_KMS("Connector id %d unknown\n",
2875 DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n",
2879 connector_set[i] = connector;
2884 set.x = crtc_req->x;
2885 set.y = crtc_req->y;
2887 set.connectors = connector_set;
2888 set.num_connectors = crtc_req->count_connectors;
2890 ret = drm_mode_set_config_internal(&set);
2894 drm_framebuffer_unreference(fb);
2896 kfree(connector_set);
2897 drm_mode_destroy(dev, mode);
2898 drm_modeset_unlock_all(dev);
2903 * drm_mode_cursor_universal - translate legacy cursor ioctl call into a
2904 * universal plane handler call
2905 * @crtc: crtc to update cursor for
2906 * @req: data pointer for the ioctl
2907 * @file_priv: drm file for the ioctl call
2909 * Legacy cursor ioctl's work directly with driver buffer handles. To
2910 * translate legacy ioctl calls into universal plane handler calls, we need to
2911 * wrap the native buffer handle in a drm_framebuffer.
2913 * Note that we assume any handle passed to the legacy ioctls was a 32-bit ARGB
2914 * buffer with a pitch of 4*width; the universal plane interface should be used
2915 * directly in cases where the hardware can support other buffer settings and
2916 * userspace wants to make use of these capabilities.
2919 * Zero on success, negative errno on failure.
2921 static int drm_mode_cursor_universal(struct drm_crtc *crtc,
2922 struct drm_mode_cursor2 *req,
2923 struct drm_file *file_priv)
2925 struct drm_device *dev = crtc->dev;
2926 struct drm_framebuffer *fb = NULL;
2927 struct drm_mode_fb_cmd2 fbreq = {
2928 .width = req->width,
2929 .height = req->height,
2930 .pixel_format = DRM_FORMAT_ARGB8888,
2931 .pitches = { req->width * 4 },
2932 .handles = { req->handle },
2934 int32_t crtc_x, crtc_y;
2935 uint32_t crtc_w = 0, crtc_h = 0;
2936 uint32_t src_w = 0, src_h = 0;
2939 BUG_ON(!crtc->cursor);
2940 WARN_ON(crtc->cursor->crtc != crtc && crtc->cursor->crtc != NULL);
2943 * Obtain fb we'll be using (either new or existing) and take an extra
2944 * reference to it if fb != null. setplane will take care of dropping
2945 * the reference if the plane update fails.
2947 if (req->flags & DRM_MODE_CURSOR_BO) {
2949 fb = internal_framebuffer_create(dev, &fbreq, file_priv);
2951 DRM_DEBUG_KMS("failed to wrap cursor buffer in drm framebuffer\n");
2958 fb = crtc->cursor->fb;
2960 drm_framebuffer_reference(fb);
2963 if (req->flags & DRM_MODE_CURSOR_MOVE) {
2967 crtc_x = crtc->cursor_x;
2968 crtc_y = crtc->cursor_y;
2973 crtc_h = fb->height;
2974 src_w = fb->width << 16;
2975 src_h = fb->height << 16;
2979 * setplane_internal will take care of deref'ing either the old or new
2980 * framebuffer depending on success.
2982 ret = __setplane_internal(crtc->cursor, crtc, fb,
2983 crtc_x, crtc_y, crtc_w, crtc_h,
2984 0, 0, src_w, src_h);
2986 /* Update successful; save new cursor position, if necessary */
2987 if (ret == 0 && req->flags & DRM_MODE_CURSOR_MOVE) {
2988 crtc->cursor_x = req->x;
2989 crtc->cursor_y = req->y;
2995 static int drm_mode_cursor_common(struct drm_device *dev,
2996 struct drm_mode_cursor2 *req,
2997 struct drm_file *file_priv)
2999 struct drm_crtc *crtc;
3002 if (!drm_core_check_feature(dev, DRIVER_MODESET))
3005 if (!req->flags || (~DRM_MODE_CURSOR_FLAGS & req->flags))
3008 crtc = drm_crtc_find(dev, req->crtc_id);
3010 DRM_DEBUG_KMS("Unknown CRTC ID %d\n", req->crtc_id);
3015 * If this crtc has a universal cursor plane, call that plane's update
3016 * handler rather than using legacy cursor handlers.
3018 drm_modeset_lock_crtc(crtc, crtc->cursor);
3020 ret = drm_mode_cursor_universal(crtc, req, file_priv);
3024 if (req->flags & DRM_MODE_CURSOR_BO) {
3025 if (!crtc->funcs->cursor_set && !crtc->funcs->cursor_set2) {
3029 /* Turns off the cursor if handle is 0 */
3030 if (crtc->funcs->cursor_set2)
3031 ret = crtc->funcs->cursor_set2(crtc, file_priv, req->handle,
3032 req->width, req->height, req->hot_x, req->hot_y);
3034 ret = crtc->funcs->cursor_set(crtc, file_priv, req->handle,
3035 req->width, req->height);
3038 if (req->flags & DRM_MODE_CURSOR_MOVE) {
3039 if (crtc->funcs->cursor_move) {
3040 ret = crtc->funcs->cursor_move(crtc, req->x, req->y);
3047 drm_modeset_unlock_crtc(crtc);
3055 * drm_mode_cursor_ioctl - set CRTC's cursor configuration
3056 * @dev: drm device for the ioctl
3057 * @data: data pointer for the ioctl
3058 * @file_priv: drm file for the ioctl call
3060 * Set the cursor configuration based on user request.
3062 * Called by the user via ioctl.
3065 * Zero on success, negative errno on failure.
3067 int drm_mode_cursor_ioctl(struct drm_device *dev,
3068 void *data, struct drm_file *file_priv)
3070 struct drm_mode_cursor *req = data;
3071 struct drm_mode_cursor2 new_req;
3073 memcpy(&new_req, req, sizeof(struct drm_mode_cursor));
3074 new_req.hot_x = new_req.hot_y = 0;
3076 return drm_mode_cursor_common(dev, &new_req, file_priv);
3080 * drm_mode_cursor2_ioctl - set CRTC's cursor configuration
3081 * @dev: drm device for the ioctl
3082 * @data: data pointer for the ioctl
3083 * @file_priv: drm file for the ioctl call
3085 * Set the cursor configuration based on user request. This implements the 2nd
3086 * version of the cursor ioctl, which allows userspace to additionally specify
3087 * the hotspot of the pointer.
3089 * Called by the user via ioctl.
3092 * Zero on success, negative errno on failure.
3094 int drm_mode_cursor2_ioctl(struct drm_device *dev,
3095 void *data, struct drm_file *file_priv)
3097 struct drm_mode_cursor2 *req = data;
3099 return drm_mode_cursor_common(dev, req, file_priv);
3103 * drm_mode_legacy_fb_format - compute drm fourcc code from legacy description
3104 * @bpp: bits per pixels
3105 * @depth: bit depth per pixel
3107 * Computes a drm fourcc pixel format code for the given @bpp/@depth values.
3108 * Useful in fbdev emulation code, since that deals in those values.
3110 uint32_t drm_mode_legacy_fb_format(uint32_t bpp, uint32_t depth)
3116 fmt = DRM_FORMAT_C8;
3120 fmt = DRM_FORMAT_XRGB1555;
3122 fmt = DRM_FORMAT_RGB565;
3125 fmt = DRM_FORMAT_RGB888;
3129 fmt = DRM_FORMAT_XRGB8888;
3130 else if (depth == 30)
3131 fmt = DRM_FORMAT_XRGB2101010;
3133 fmt = DRM_FORMAT_ARGB8888;
3136 DRM_ERROR("bad bpp, assuming x8r8g8b8 pixel format\n");
3137 fmt = DRM_FORMAT_XRGB8888;
3143 EXPORT_SYMBOL(drm_mode_legacy_fb_format);
3146 * drm_mode_addfb - add an FB to the graphics configuration
3147 * @dev: drm device for the ioctl
3148 * @data: data pointer for the ioctl
3149 * @file_priv: drm file for the ioctl call
3151 * Add a new FB to the specified CRTC, given a user request. This is the
3152 * original addfb ioctl which only supported RGB formats.
3154 * Called by the user via ioctl.
3157 * Zero on success, negative errno on failure.
3159 int drm_mode_addfb(struct drm_device *dev,
3160 void *data, struct drm_file *file_priv)
3162 struct drm_mode_fb_cmd *or = data;
3163 struct drm_mode_fb_cmd2 r = {};
3166 /* convert to new format and call new ioctl */
3167 r.fb_id = or->fb_id;
3168 r.width = or->width;
3169 r.height = or->height;
3170 r.pitches[0] = or->pitch;
3171 r.pixel_format = drm_mode_legacy_fb_format(or->bpp, or->depth);
3172 r.handles[0] = or->handle;
3174 ret = drm_mode_addfb2(dev, &r, file_priv);
3178 or->fb_id = r.fb_id;
3183 static int format_check(const struct drm_mode_fb_cmd2 *r)
3185 uint32_t format = r->pixel_format & ~DRM_FORMAT_BIG_ENDIAN;
3189 case DRM_FORMAT_RGB332:
3190 case DRM_FORMAT_BGR233:
3191 case DRM_FORMAT_XRGB4444:
3192 case DRM_FORMAT_XBGR4444:
3193 case DRM_FORMAT_RGBX4444:
3194 case DRM_FORMAT_BGRX4444:
3195 case DRM_FORMAT_ARGB4444:
3196 case DRM_FORMAT_ABGR4444:
3197 case DRM_FORMAT_RGBA4444:
3198 case DRM_FORMAT_BGRA4444:
3199 case DRM_FORMAT_XRGB1555:
3200 case DRM_FORMAT_XBGR1555:
3201 case DRM_FORMAT_RGBX5551:
3202 case DRM_FORMAT_BGRX5551:
3203 case DRM_FORMAT_ARGB1555:
3204 case DRM_FORMAT_ABGR1555:
3205 case DRM_FORMAT_RGBA5551:
3206 case DRM_FORMAT_BGRA5551:
3207 case DRM_FORMAT_RGB565:
3208 case DRM_FORMAT_BGR565:
3209 case DRM_FORMAT_RGB888:
3210 case DRM_FORMAT_BGR888:
3211 case DRM_FORMAT_XRGB8888:
3212 case DRM_FORMAT_XBGR8888:
3213 case DRM_FORMAT_RGBX8888:
3214 case DRM_FORMAT_BGRX8888:
3215 case DRM_FORMAT_ARGB8888:
3216 case DRM_FORMAT_ABGR8888:
3217 case DRM_FORMAT_RGBA8888:
3218 case DRM_FORMAT_BGRA8888:
3219 case DRM_FORMAT_XRGB2101010:
3220 case DRM_FORMAT_XBGR2101010:
3221 case DRM_FORMAT_RGBX1010102:
3222 case DRM_FORMAT_BGRX1010102:
3223 case DRM_FORMAT_ARGB2101010:
3224 case DRM_FORMAT_ABGR2101010:
3225 case DRM_FORMAT_RGBA1010102:
3226 case DRM_FORMAT_BGRA1010102:
3227 case DRM_FORMAT_YUYV:
3228 case DRM_FORMAT_YVYU:
3229 case DRM_FORMAT_UYVY:
3230 case DRM_FORMAT_VYUY:
3231 case DRM_FORMAT_AYUV:
3232 case DRM_FORMAT_NV12:
3233 case DRM_FORMAT_NV21:
3234 case DRM_FORMAT_NV16:
3235 case DRM_FORMAT_NV61:
3236 case DRM_FORMAT_NV24:
3237 case DRM_FORMAT_NV42:
3238 case DRM_FORMAT_YUV410:
3239 case DRM_FORMAT_YVU410:
3240 case DRM_FORMAT_YUV411:
3241 case DRM_FORMAT_YVU411:
3242 case DRM_FORMAT_YUV420:
3243 case DRM_FORMAT_YVU420:
3244 case DRM_FORMAT_YUV422:
3245 case DRM_FORMAT_YVU422:
3246 case DRM_FORMAT_YUV444:
3247 case DRM_FORMAT_YVU444:
3250 DRM_DEBUG_KMS("invalid pixel format %s\n",
3251 drm_get_format_name(r->pixel_format));
3256 static int framebuffer_check(const struct drm_mode_fb_cmd2 *r)
3258 int ret, hsub, vsub, num_planes, i;
3260 ret = format_check(r);
3262 DRM_DEBUG_KMS("bad framebuffer format %s\n",
3263 drm_get_format_name(r->pixel_format));
3267 hsub = drm_format_horz_chroma_subsampling(r->pixel_format);
3268 vsub = drm_format_vert_chroma_subsampling(r->pixel_format);
3269 num_planes = drm_format_num_planes(r->pixel_format);
3271 if (r->width == 0 || r->width % hsub) {
3272 DRM_DEBUG_KMS("bad framebuffer width %u\n", r->width);
3276 if (r->height == 0 || r->height % vsub) {
3277 DRM_DEBUG_KMS("bad framebuffer height %u\n", r->height);
3281 for (i = 0; i < num_planes; i++) {
3282 unsigned int width = r->width / (i != 0 ? hsub : 1);
3283 unsigned int height = r->height / (i != 0 ? vsub : 1);
3284 unsigned int cpp = drm_format_plane_cpp(r->pixel_format, i);
3286 if (!r->handles[i]) {
3287 DRM_DEBUG_KMS("no buffer object handle for plane %d\n", i);
3291 if ((uint64_t) width * cpp > UINT_MAX)
3294 if ((uint64_t) height * r->pitches[i] + r->offsets[i] > UINT_MAX)
3297 if (r->pitches[i] < width * cpp) {
3298 DRM_DEBUG_KMS("bad pitch %u for plane %d\n", r->pitches[i], i);
3302 if (r->modifier[i] && !(r->flags & DRM_MODE_FB_MODIFIERS)) {
3303 DRM_DEBUG_KMS("bad fb modifier %llu for plane %d\n",
3308 /* modifier specific checks: */
3309 switch (r->modifier[i]) {
3310 case DRM_FORMAT_MOD_SAMSUNG_64_32_TILE:
3311 /* NOTE: the pitch restriction may be lifted later if it turns
3312 * out that no hw has this restriction:
3314 if (r->pixel_format != DRM_FORMAT_NV12 ||
3315 width % 128 || height % 32 ||
3316 r->pitches[i] % 128) {
3317 DRM_DEBUG_KMS("bad modifier data for plane %d\n", i);
3327 for (i = num_planes; i < 4; i++) {
3328 if (r->modifier[i]) {
3329 DRM_DEBUG_KMS("non-zero modifier for unused plane %d\n", i);
3333 /* Pre-FB_MODIFIERS userspace didn't clear the structs properly. */
3334 if (!(r->flags & DRM_MODE_FB_MODIFIERS))
3337 if (r->handles[i]) {
3338 DRM_DEBUG_KMS("buffer object handle for unused plane %d\n", i);
3342 if (r->pitches[i]) {
3343 DRM_DEBUG_KMS("non-zero pitch for unused plane %d\n", i);
3347 if (r->offsets[i]) {
3348 DRM_DEBUG_KMS("non-zero offset for unused plane %d\n", i);
3356 static struct drm_framebuffer *
3357 internal_framebuffer_create(struct drm_device *dev,
3358 struct drm_mode_fb_cmd2 *r,
3359 struct drm_file *file_priv)
3361 struct drm_mode_config *config = &dev->mode_config;
3362 struct drm_framebuffer *fb;
3365 if (r->flags & ~(DRM_MODE_FB_INTERLACED | DRM_MODE_FB_MODIFIERS)) {
3366 DRM_DEBUG_KMS("bad framebuffer flags 0x%08x\n", r->flags);
3367 return ERR_PTR(-EINVAL);
3370 if ((config->min_width > r->width) || (r->width > config->max_width)) {
3371 DRM_DEBUG_KMS("bad framebuffer width %d, should be >= %d && <= %d\n",
3372 r->width, config->min_width, config->max_width);
3373 return ERR_PTR(-EINVAL);
3375 if ((config->min_height > r->height) || (r->height > config->max_height)) {
3376 DRM_DEBUG_KMS("bad framebuffer height %d, should be >= %d && <= %d\n",
3377 r->height, config->min_height, config->max_height);
3378 return ERR_PTR(-EINVAL);
3381 if (r->flags & DRM_MODE_FB_MODIFIERS &&
3382 !dev->mode_config.allow_fb_modifiers) {
3383 DRM_DEBUG_KMS("driver does not support fb modifiers\n");
3384 return ERR_PTR(-EINVAL);
3387 ret = framebuffer_check(r);
3389 return ERR_PTR(ret);
3391 fb = dev->mode_config.funcs->fb_create(dev, file_priv, r);
3393 DRM_DEBUG_KMS("could not create framebuffer\n");
3401 * drm_mode_addfb2 - add an FB to the graphics configuration
3402 * @dev: drm device for the ioctl
3403 * @data: data pointer for the ioctl
3404 * @file_priv: drm file for the ioctl call
3406 * Add a new FB to the specified CRTC, given a user request with format. This is
3407 * the 2nd version of the addfb ioctl, which supports multi-planar framebuffers
3408 * and uses fourcc codes as pixel format specifiers.
3410 * Called by the user via ioctl.
3413 * Zero on success, negative errno on failure.
3415 int drm_mode_addfb2(struct drm_device *dev,
3416 void *data, struct drm_file *file_priv)
3418 struct drm_mode_fb_cmd2 *r = data;
3419 struct drm_framebuffer *fb;
3421 if (!drm_core_check_feature(dev, DRIVER_MODESET))
3424 fb = internal_framebuffer_create(dev, r, file_priv);
3428 /* Transfer ownership to the filp for reaping on close */
3430 DRM_DEBUG_KMS("[FB:%d]\n", fb->base.id);
3431 mutex_lock(&file_priv->fbs_lock);
3432 r->fb_id = fb->base.id;
3433 list_add(&fb->filp_head, &file_priv->fbs);
3434 mutex_unlock(&file_priv->fbs_lock);
3440 * drm_mode_rmfb - remove an FB from the configuration
3441 * @dev: drm device for the ioctl
3442 * @data: data pointer for the ioctl
3443 * @file_priv: drm file for the ioctl call
3445 * Remove the FB specified by the user.
3447 * Called by the user via ioctl.
3450 * Zero on success, negative errno on failure.
3452 int drm_mode_rmfb(struct drm_device *dev,
3453 void *data, struct drm_file *file_priv)
3455 struct drm_framebuffer *fb = NULL;
3456 struct drm_framebuffer *fbl = NULL;
3457 uint32_t *id = data;
3460 if (!drm_core_check_feature(dev, DRIVER_MODESET))
3463 mutex_lock(&file_priv->fbs_lock);
3464 mutex_lock(&dev->mode_config.fb_lock);
3465 fb = __drm_framebuffer_lookup(dev, *id);
3469 list_for_each_entry(fbl, &file_priv->fbs, filp_head)
3475 list_del_init(&fb->filp_head);
3476 mutex_unlock(&dev->mode_config.fb_lock);
3477 mutex_unlock(&file_priv->fbs_lock);
3479 drm_framebuffer_unreference(fb);
3484 mutex_unlock(&dev->mode_config.fb_lock);
3485 mutex_unlock(&file_priv->fbs_lock);
3491 * drm_mode_getfb - get FB info
3492 * @dev: drm device for the ioctl
3493 * @data: data pointer for the ioctl
3494 * @file_priv: drm file for the ioctl call
3496 * Lookup the FB given its ID and return info about it.
3498 * Called by the user via ioctl.
3501 * Zero on success, negative errno on failure.
3503 int drm_mode_getfb(struct drm_device *dev,
3504 void *data, struct drm_file *file_priv)
3506 struct drm_mode_fb_cmd *r = data;
3507 struct drm_framebuffer *fb;
3510 if (!drm_core_check_feature(dev, DRIVER_MODESET))
3513 fb = drm_framebuffer_lookup(dev, r->fb_id);
3517 r->height = fb->height;
3518 r->width = fb->width;
3519 r->depth = fb->depth;
3520 r->bpp = fb->bits_per_pixel;
3521 r->pitch = fb->pitches[0];
3522 if (fb->funcs->create_handle) {
3523 if (file_priv->is_master || capable(CAP_SYS_ADMIN) ||
3524 drm_is_control_client(file_priv)) {
3525 ret = fb->funcs->create_handle(fb, file_priv,
3528 /* GET_FB() is an unprivileged ioctl so we must not
3529 * return a buffer-handle to non-master processes! For
3530 * backwards-compatibility reasons, we cannot make
3531 * GET_FB() privileged, so just return an invalid handle
3532 * for non-masters. */
3540 drm_framebuffer_unreference(fb);
3546 * drm_mode_dirtyfb_ioctl - flush frontbuffer rendering on an FB
3547 * @dev: drm device for the ioctl
3548 * @data: data pointer for the ioctl
3549 * @file_priv: drm file for the ioctl call
3551 * Lookup the FB and flush out the damaged area supplied by userspace as a clip
3552 * rectangle list. Generic userspace which does frontbuffer rendering must call
3553 * this ioctl to flush out the changes on manual-update display outputs, e.g.
3554 * usb display-link, mipi manual update panels or edp panel self refresh modes.
3556 * Modesetting drivers which always update the frontbuffer do not need to
3557 * implement the corresponding ->dirty framebuffer callback.
3559 * Called by the user via ioctl.
3562 * Zero on success, negative errno on failure.
3564 int drm_mode_dirtyfb_ioctl(struct drm_device *dev,
3565 void *data, struct drm_file *file_priv)
3567 struct drm_clip_rect __user *clips_ptr;
3568 struct drm_clip_rect *clips = NULL;
3569 struct drm_mode_fb_dirty_cmd *r = data;
3570 struct drm_framebuffer *fb;
3575 if (!drm_core_check_feature(dev, DRIVER_MODESET))
3578 fb = drm_framebuffer_lookup(dev, r->fb_id);
3582 num_clips = r->num_clips;
3583 clips_ptr = (struct drm_clip_rect __user *)(unsigned long)r->clips_ptr;
3585 if (!num_clips != !clips_ptr) {
3590 flags = DRM_MODE_FB_DIRTY_FLAGS & r->flags;
3592 /* If userspace annotates copy, clips must come in pairs */
3593 if (flags & DRM_MODE_FB_DIRTY_ANNOTATE_COPY && (num_clips % 2)) {
3598 if (num_clips && clips_ptr) {
3599 if (num_clips < 0 || num_clips > DRM_MODE_FB_DIRTY_MAX_CLIPS) {
3603 clips = kcalloc(num_clips, sizeof(*clips), GFP_KERNEL);
3609 ret = copy_from_user(clips, clips_ptr,
3610 num_clips * sizeof(*clips));
3617 if (fb->funcs->dirty) {
3618 ret = fb->funcs->dirty(fb, file_priv, flags, r->color,
3627 drm_framebuffer_unreference(fb);
3634 * drm_fb_release - remove and free the FBs on this file
3635 * @priv: drm file for the ioctl
3637 * Destroy all the FBs associated with @filp.
3639 * Called by the user via ioctl.
3642 * Zero on success, negative errno on failure.
3644 void drm_fb_release(struct drm_file *priv)
3646 struct drm_framebuffer *fb, *tfb;
3649 * When the file gets released that means no one else can access the fb
3650 * list any more, so no need to grab fpriv->fbs_lock. And we need to
3651 * avoid upsetting lockdep since the universal cursor code adds a
3652 * framebuffer while holding mutex locks.
3654 * Note that a real deadlock between fpriv->fbs_lock and the modeset
3655 * locks is impossible here since no one else but this function can get
3658 list_for_each_entry_safe(fb, tfb, &priv->fbs, filp_head) {
3659 list_del_init(&fb->filp_head);
3661 /* This drops the fpriv->fbs reference. */
3662 drm_framebuffer_unreference(fb);
3667 * drm_property_create - create a new property type
3669 * @flags: flags specifying the property type
3670 * @name: name of the property
3671 * @num_values: number of pre-defined values
3673 * This creates a new generic drm property which can then be attached to a drm
3674 * object with drm_object_attach_property. The returned property object must be
3675 * freed with drm_property_destroy.
3677 * Note that the DRM core keeps a per-device list of properties and that, if
3678 * drm_mode_config_cleanup() is called, it will destroy all properties created
3682 * A pointer to the newly created property on success, NULL on failure.
3684 struct drm_property *drm_property_create(struct drm_device *dev, int flags,
3685 const char *name, int num_values)
3687 struct drm_property *property = NULL;
3690 property = kzalloc(sizeof(struct drm_property), GFP_KERNEL);
3694 property->dev = dev;
3697 property->values = kcalloc(num_values, sizeof(uint64_t),
3699 if (!property->values)
3703 ret = drm_mode_object_get(dev, &property->base, DRM_MODE_OBJECT_PROPERTY);
3707 property->flags = flags;
3708 property->num_values = num_values;
3709 INIT_LIST_HEAD(&property->enum_list);
3712 strncpy(property->name, name, DRM_PROP_NAME_LEN);
3713 property->name[DRM_PROP_NAME_LEN-1] = '\0';
3716 list_add_tail(&property->head, &dev->mode_config.property_list);
3718 WARN_ON(!drm_property_type_valid(property));
3722 kfree(property->values);
3726 EXPORT_SYMBOL(drm_property_create);
3729 * drm_property_create_enum - create a new enumeration property type
3731 * @flags: flags specifying the property type
3732 * @name: name of the property
3733 * @props: enumeration lists with property values
3734 * @num_values: number of pre-defined values
3736 * This creates a new generic drm property which can then be attached to a drm
3737 * object with drm_object_attach_property. The returned property object must be
3738 * freed with drm_property_destroy.
3740 * Userspace is only allowed to set one of the predefined values for enumeration
3744 * A pointer to the newly created property on success, NULL on failure.
3746 struct drm_property *drm_property_create_enum(struct drm_device *dev, int flags,
3748 const struct drm_prop_enum_list *props,
3751 struct drm_property *property;
3754 flags |= DRM_MODE_PROP_ENUM;
3756 property = drm_property_create(dev, flags, name, num_values);
3760 for (i = 0; i < num_values; i++) {
3761 ret = drm_property_add_enum(property, i,
3765 drm_property_destroy(dev, property);
3772 EXPORT_SYMBOL(drm_property_create_enum);
3775 * drm_property_create_bitmask - create a new bitmask property type
3777 * @flags: flags specifying the property type
3778 * @name: name of the property
3779 * @props: enumeration lists with property bitflags
3780 * @num_props: size of the @props array
3781 * @supported_bits: bitmask of all supported enumeration values
3783 * This creates a new bitmask drm property which can then be attached to a drm
3784 * object with drm_object_attach_property. The returned property object must be
3785 * freed with drm_property_destroy.
3787 * Compared to plain enumeration properties userspace is allowed to set any
3788 * or'ed together combination of the predefined property bitflag values
3791 * A pointer to the newly created property on success, NULL on failure.
3793 struct drm_property *drm_property_create_bitmask(struct drm_device *dev,
3794 int flags, const char *name,
3795 const struct drm_prop_enum_list *props,
3797 uint64_t supported_bits)
3799 struct drm_property *property;
3800 int i, ret, index = 0;
3801 int num_values = hweight64(supported_bits);
3803 flags |= DRM_MODE_PROP_BITMASK;
3805 property = drm_property_create(dev, flags, name, num_values);
3808 for (i = 0; i < num_props; i++) {
3809 if (!(supported_bits & (1ULL << props[i].type)))
3812 if (WARN_ON(index >= num_values)) {
3813 drm_property_destroy(dev, property);
3817 ret = drm_property_add_enum(property, index++,
3821 drm_property_destroy(dev, property);
3828 EXPORT_SYMBOL(drm_property_create_bitmask);
3830 static struct drm_property *property_create_range(struct drm_device *dev,
3831 int flags, const char *name,
3832 uint64_t min, uint64_t max)
3834 struct drm_property *property;
3836 property = drm_property_create(dev, flags, name, 2);
3840 property->values[0] = min;
3841 property->values[1] = max;
3847 * drm_property_create_range - create a new unsigned ranged property type
3849 * @flags: flags specifying the property type
3850 * @name: name of the property
3851 * @min: minimum value of the property
3852 * @max: maximum value of the property
3854 * This creates a new generic drm property which can then be attached to a drm
3855 * object with drm_object_attach_property. The returned property object must be
3856 * freed with drm_property_destroy.
3858 * Userspace is allowed to set any unsigned integer value in the (min, max)
3862 * A pointer to the newly created property on success, NULL on failure.
3864 struct drm_property *drm_property_create_range(struct drm_device *dev, int flags,
3866 uint64_t min, uint64_t max)
3868 return property_create_range(dev, DRM_MODE_PROP_RANGE | flags,
3871 EXPORT_SYMBOL(drm_property_create_range);
3874 * drm_property_create_signed_range - create a new signed ranged property type
3876 * @flags: flags specifying the property type
3877 * @name: name of the property
3878 * @min: minimum value of the property
3879 * @max: maximum value of the property
3881 * This creates a new generic drm property which can then be attached to a drm
3882 * object with drm_object_attach_property. The returned property object must be
3883 * freed with drm_property_destroy.
3885 * Userspace is allowed to set any signed integer value in the (min, max)
3889 * A pointer to the newly created property on success, NULL on failure.
3891 struct drm_property *drm_property_create_signed_range(struct drm_device *dev,
3892 int flags, const char *name,
3893 int64_t min, int64_t max)
3895 return property_create_range(dev, DRM_MODE_PROP_SIGNED_RANGE | flags,
3896 name, I642U64(min), I642U64(max));
3898 EXPORT_SYMBOL(drm_property_create_signed_range);
3901 * drm_property_create_object - create a new object property type
3903 * @flags: flags specifying the property type
3904 * @name: name of the property
3905 * @type: object type from DRM_MODE_OBJECT_* defines
3907 * This creates a new generic drm property which can then be attached to a drm
3908 * object with drm_object_attach_property. The returned property object must be
3909 * freed with drm_property_destroy.
3911 * Userspace is only allowed to set this to any property value of the given
3912 * @type. Only useful for atomic properties, which is enforced.
3915 * A pointer to the newly created property on success, NULL on failure.
3917 struct drm_property *drm_property_create_object(struct drm_device *dev,
3918 int flags, const char *name, uint32_t type)
3920 struct drm_property *property;
3922 flags |= DRM_MODE_PROP_OBJECT;
3924 if (WARN_ON(!(flags & DRM_MODE_PROP_ATOMIC)))
3927 property = drm_property_create(dev, flags, name, 1);
3931 property->values[0] = type;
3935 EXPORT_SYMBOL(drm_property_create_object);
3938 * drm_property_create_bool - create a new boolean property type
3940 * @flags: flags specifying the property type
3941 * @name: name of the property
3943 * This creates a new generic drm property which can then be attached to a drm
3944 * object with drm_object_attach_property. The returned property object must be
3945 * freed with drm_property_destroy.
3947 * This is implemented as a ranged property with only {0, 1} as valid values.
3950 * A pointer to the newly created property on success, NULL on failure.
3952 struct drm_property *drm_property_create_bool(struct drm_device *dev, int flags,
3955 return drm_property_create_range(dev, flags, name, 0, 1);
3957 EXPORT_SYMBOL(drm_property_create_bool);
3960 * drm_property_add_enum - add a possible value to an enumeration property
3961 * @property: enumeration property to change
3962 * @index: index of the new enumeration
3963 * @value: value of the new enumeration
3964 * @name: symbolic name of the new enumeration
3966 * This functions adds enumerations to a property.
3968 * It's use is deprecated, drivers should use one of the more specific helpers
3969 * to directly create the property with all enumerations already attached.
3972 * Zero on success, error code on failure.
3974 int drm_property_add_enum(struct drm_property *property, int index,
3975 uint64_t value, const char *name)
3977 struct drm_property_enum *prop_enum;
3979 if (!(drm_property_type_is(property, DRM_MODE_PROP_ENUM) ||
3980 drm_property_type_is(property, DRM_MODE_PROP_BITMASK)))
3984 * Bitmask enum properties have the additional constraint of values
3987 if (drm_property_type_is(property, DRM_MODE_PROP_BITMASK) &&
3991 if (!list_empty(&property->enum_list)) {
3992 list_for_each_entry(prop_enum, &property->enum_list, head) {
3993 if (prop_enum->value == value) {
3994 strncpy(prop_enum->name, name, DRM_PROP_NAME_LEN);
3995 prop_enum->name[DRM_PROP_NAME_LEN-1] = '\0';
4001 prop_enum = kzalloc(sizeof(struct drm_property_enum), GFP_KERNEL);
4005 strncpy(prop_enum->name, name, DRM_PROP_NAME_LEN);
4006 prop_enum->name[DRM_PROP_NAME_LEN-1] = '\0';
4007 prop_enum->value = value;
4009 property->values[index] = value;
4010 list_add_tail(&prop_enum->head, &property->enum_list);
4013 EXPORT_SYMBOL(drm_property_add_enum);
4016 * drm_property_destroy - destroy a drm property
4018 * @property: property to destry
4020 * This function frees a property including any attached resources like
4021 * enumeration values.
4023 void drm_property_destroy(struct drm_device *dev, struct drm_property *property)
4025 struct drm_property_enum *prop_enum, *pt;
4027 list_for_each_entry_safe(prop_enum, pt, &property->enum_list, head) {
4028 list_del(&prop_enum->head);
4032 if (property->num_values)
4033 kfree(property->values);
4034 drm_mode_object_put(dev, &property->base);
4035 list_del(&property->head);
4038 EXPORT_SYMBOL(drm_property_destroy);
4041 * drm_object_attach_property - attach a property to a modeset object
4042 * @obj: drm modeset object
4043 * @property: property to attach
4044 * @init_val: initial value of the property
4046 * This attaches the given property to the modeset object with the given initial
4047 * value. Currently this function cannot fail since the properties are stored in
4048 * a statically sized array.
4050 void drm_object_attach_property(struct drm_mode_object *obj,
4051 struct drm_property *property,
4054 int count = obj->properties->count;
4056 if (count == DRM_OBJECT_MAX_PROPERTY) {
4057 WARN(1, "Failed to attach object property (type: 0x%x). Please "
4058 "increase DRM_OBJECT_MAX_PROPERTY by 1 for each time "
4059 "you see this message on the same object type.\n",
4064 obj->properties->properties[count] = property;
4065 obj->properties->values[count] = init_val;
4066 obj->properties->count++;
4067 if (property->flags & DRM_MODE_PROP_ATOMIC)
4068 obj->properties->atomic_count++;
4070 EXPORT_SYMBOL(drm_object_attach_property);
4073 * drm_object_property_set_value - set the value of a property
4074 * @obj: drm mode object to set property value for
4075 * @property: property to set
4076 * @val: value the property should be set to
4078 * This functions sets a given property on a given object. This function only
4079 * changes the software state of the property, it does not call into the
4080 * driver's ->set_property callback.
4083 * Zero on success, error code on failure.
4085 int drm_object_property_set_value(struct drm_mode_object *obj,
4086 struct drm_property *property, uint64_t val)
4090 for (i = 0; i < obj->properties->count; i++) {
4091 if (obj->properties->properties[i] == property) {
4092 obj->properties->values[i] = val;
4099 EXPORT_SYMBOL(drm_object_property_set_value);
4102 * drm_object_property_get_value - retrieve the value of a property
4103 * @obj: drm mode object to get property value from
4104 * @property: property to retrieve
4105 * @val: storage for the property value
4107 * This function retrieves the softare state of the given property for the given
4108 * property. Since there is no driver callback to retrieve the current property
4109 * value this might be out of sync with the hardware, depending upon the driver
4113 * Zero on success, error code on failure.
4115 int drm_object_property_get_value(struct drm_mode_object *obj,
4116 struct drm_property *property, uint64_t *val)
4120 /* read-only properties bypass atomic mechanism and still store
4121 * their value in obj->properties->values[].. mostly to avoid
4122 * having to deal w/ EDID and similar props in atomic paths:
4124 if (drm_core_check_feature(property->dev, DRIVER_ATOMIC) &&
4125 !(property->flags & DRM_MODE_PROP_IMMUTABLE))
4126 return drm_atomic_get_property(obj, property, val);
4128 for (i = 0; i < obj->properties->count; i++) {
4129 if (obj->properties->properties[i] == property) {
4130 *val = obj->properties->values[i];
4137 EXPORT_SYMBOL(drm_object_property_get_value);
4140 * drm_mode_getproperty_ioctl - get the property metadata
4143 * @file_priv: DRM file info
4145 * This function retrieves the metadata for a given property, like the different
4146 * possible values for an enum property or the limits for a range property.
4148 * Blob properties are special
4150 * Called by the user via ioctl.
4153 * Zero on success, negative errno on failure.
4155 int drm_mode_getproperty_ioctl(struct drm_device *dev,
4156 void *data, struct drm_file *file_priv)
4158 struct drm_mode_get_property *out_resp = data;
4159 struct drm_property *property;
4161 int value_count = 0;
4164 struct drm_property_enum *prop_enum;
4165 struct drm_mode_property_enum __user *enum_ptr;
4166 uint64_t __user *values_ptr;
4168 if (!drm_core_check_feature(dev, DRIVER_MODESET))
4171 drm_modeset_lock_all(dev);
4172 property = drm_property_find(dev, out_resp->prop_id);
4178 if (drm_property_type_is(property, DRM_MODE_PROP_ENUM) ||
4179 drm_property_type_is(property, DRM_MODE_PROP_BITMASK)) {
4180 list_for_each_entry(prop_enum, &property->enum_list, head)
4184 value_count = property->num_values;
4186 strncpy(out_resp->name, property->name, DRM_PROP_NAME_LEN);
4187 out_resp->name[DRM_PROP_NAME_LEN-1] = 0;
4188 out_resp->flags = property->flags;
4190 if ((out_resp->count_values >= value_count) && value_count) {
4191 values_ptr = (uint64_t __user *)(unsigned long)out_resp->values_ptr;
4192 for (i = 0; i < value_count; i++) {
4193 if (copy_to_user(values_ptr + i, &property->values[i], sizeof(uint64_t))) {
4199 out_resp->count_values = value_count;
4201 if (drm_property_type_is(property, DRM_MODE_PROP_ENUM) ||
4202 drm_property_type_is(property, DRM_MODE_PROP_BITMASK)) {
4203 if ((out_resp->count_enum_blobs >= enum_count) && enum_count) {
4205 enum_ptr = (struct drm_mode_property_enum __user *)(unsigned long)out_resp->enum_blob_ptr;
4206 list_for_each_entry(prop_enum, &property->enum_list, head) {
4208 if (copy_to_user(&enum_ptr[copied].value, &prop_enum->value, sizeof(uint64_t))) {
4213 if (copy_to_user(&enum_ptr[copied].name,
4214 &prop_enum->name, DRM_PROP_NAME_LEN)) {
4221 out_resp->count_enum_blobs = enum_count;
4225 * NOTE: The idea seems to have been to use this to read all the blob
4226 * property values. But nothing ever added them to the corresponding
4227 * list, userspace always used the special-purpose get_blob ioctl to
4228 * read the value for a blob property. It also doesn't make a lot of
4229 * sense to return values here when everything else is just metadata for
4230 * the property itself.
4232 if (drm_property_type_is(property, DRM_MODE_PROP_BLOB))
4233 out_resp->count_enum_blobs = 0;
4235 drm_modeset_unlock_all(dev);
4240 * drm_property_create_blob - Create new blob property
4242 * Creates a new blob property for a specified DRM device, optionally
4245 * @dev: DRM device to create property for
4246 * @length: Length to allocate for blob data
4247 * @data: If specified, copies data into blob
4250 * New blob property with a single reference on success, or an ERR_PTR
4253 struct drm_property_blob *
4254 drm_property_create_blob(struct drm_device *dev, size_t length,
4257 struct drm_property_blob *blob;
4260 if (!length || length > ULONG_MAX - sizeof(struct drm_property_blob))
4261 return ERR_PTR(-EINVAL);
4263 blob = kzalloc(sizeof(struct drm_property_blob)+length, GFP_KERNEL);
4265 return ERR_PTR(-ENOMEM);
4267 /* This must be explicitly initialised, so we can safely call list_del
4268 * on it in the removal handler, even if it isn't in a file list. */
4269 INIT_LIST_HEAD(&blob->head_file);
4270 blob->length = length;
4274 memcpy(blob->data, data, length);
4276 mutex_lock(&dev->mode_config.blob_lock);
4278 ret = drm_mode_object_get(dev, &blob->base, DRM_MODE_OBJECT_BLOB);
4281 mutex_unlock(&dev->mode_config.blob_lock);
4282 return ERR_PTR(-EINVAL);
4285 kref_init(&blob->refcount);
4287 list_add_tail(&blob->head_global,
4288 &dev->mode_config.property_blob_list);
4290 mutex_unlock(&dev->mode_config.blob_lock);
4294 EXPORT_SYMBOL(drm_property_create_blob);
4297 * drm_property_free_blob - Blob property destructor
4299 * Internal free function for blob properties; must not be used directly.
4303 static void drm_property_free_blob(struct kref *kref)
4305 struct drm_property_blob *blob =
4306 container_of(kref, struct drm_property_blob, refcount);
4308 WARN_ON(!mutex_is_locked(&blob->dev->mode_config.blob_lock));
4310 list_del(&blob->head_global);
4311 list_del(&blob->head_file);
4312 drm_mode_object_put(blob->dev, &blob->base);
4318 * drm_property_unreference_blob - Unreference a blob property
4320 * Drop a reference on a blob property. May free the object.
4322 * @blob: Pointer to blob property
4324 void drm_property_unreference_blob(struct drm_property_blob *blob)
4326 struct drm_device *dev;
4333 DRM_DEBUG("%p: blob ID: %d (%d)\n", blob, blob->base.id, atomic_read(&blob->refcount.refcount));
4335 if (kref_put_mutex(&blob->refcount, drm_property_free_blob,
4336 &dev->mode_config.blob_lock))
4337 mutex_unlock(&dev->mode_config.blob_lock);
4339 might_lock(&dev->mode_config.blob_lock);
4341 EXPORT_SYMBOL(drm_property_unreference_blob);
4344 * drm_property_unreference_blob_locked - Unreference a blob property with blob_lock held
4346 * Drop a reference on a blob property. May free the object. This must be
4347 * called with blob_lock held.
4349 * @blob: Pointer to blob property
4351 static void drm_property_unreference_blob_locked(struct drm_property_blob *blob)
4356 DRM_DEBUG("%p: blob ID: %d (%d)\n", blob, blob->base.id, atomic_read(&blob->refcount.refcount));
4358 kref_put(&blob->refcount, drm_property_free_blob);
4362 * drm_property_destroy_user_blobs - destroy all blobs created by this client
4364 * @file_priv: destroy all blobs owned by this file handle
4366 void drm_property_destroy_user_blobs(struct drm_device *dev,
4367 struct drm_file *file_priv)
4369 struct drm_property_blob *blob, *bt;
4371 mutex_lock(&dev->mode_config.blob_lock);
4373 list_for_each_entry_safe(blob, bt, &file_priv->blobs, head_file) {
4374 list_del_init(&blob->head_file);
4375 drm_property_unreference_blob_locked(blob);
4378 mutex_unlock(&dev->mode_config.blob_lock);
4382 * drm_property_reference_blob - Take a reference on an existing property
4384 * Take a new reference on an existing blob property.
4386 * @blob: Pointer to blob property
4388 struct drm_property_blob *drm_property_reference_blob(struct drm_property_blob *blob)
4390 DRM_DEBUG("%p: blob ID: %d (%d)\n", blob, blob->base.id, atomic_read(&blob->refcount.refcount));
4391 kref_get(&blob->refcount);
4394 EXPORT_SYMBOL(drm_property_reference_blob);
4397 * Like drm_property_lookup_blob, but does not return an additional reference.
4398 * Must be called with blob_lock held.
4400 static struct drm_property_blob *__drm_property_lookup_blob(struct drm_device *dev,
4403 struct drm_mode_object *obj = NULL;
4404 struct drm_property_blob *blob;
4406 WARN_ON(!mutex_is_locked(&dev->mode_config.blob_lock));
4408 mutex_lock(&dev->mode_config.idr_mutex);
4409 obj = idr_find(&dev->mode_config.crtc_idr, id);
4410 if (!obj || (obj->type != DRM_MODE_OBJECT_BLOB) || (obj->id != id))
4413 blob = obj_to_blob(obj);
4414 mutex_unlock(&dev->mode_config.idr_mutex);
4420 * drm_property_lookup_blob - look up a blob property and take a reference
4422 * @id: id of the blob property
4424 * If successful, this takes an additional reference to the blob property.
4425 * callers need to make sure to eventually unreference the returned property
4426 * again, using @drm_property_unreference_blob.
4428 struct drm_property_blob *drm_property_lookup_blob(struct drm_device *dev,
4431 struct drm_property_blob *blob;
4433 mutex_lock(&dev->mode_config.blob_lock);
4434 blob = __drm_property_lookup_blob(dev, id);
4436 if (!kref_get_unless_zero(&blob->refcount))
4439 mutex_unlock(&dev->mode_config.blob_lock);
4443 EXPORT_SYMBOL(drm_property_lookup_blob);
4446 * drm_property_replace_global_blob - atomically replace existing blob property
4448 * @replace: location of blob property pointer to be replaced
4449 * @length: length of data for new blob, or 0 for no data
4450 * @data: content for new blob, or NULL for no data
4451 * @obj_holds_id: optional object for property holding blob ID
4452 * @prop_holds_id: optional property holding blob ID
4453 * @return 0 on success or error on failure
4455 * This function will atomically replace a global property in the blob list,
4456 * optionally updating a property which holds the ID of that property. It is
4457 * guaranteed to be atomic: no caller will be allowed to see intermediate
4458 * results, and either the entire operation will succeed and clean up the
4459 * previous property, or it will fail and the state will be unchanged.
4461 * If length is 0 or data is NULL, no new blob will be created, and the holding
4462 * property, if specified, will be set to 0.
4464 * Access to the replace pointer is assumed to be protected by the caller, e.g.
4465 * by holding the relevant modesetting object lock for its parent.
4467 * For example, a drm_connector has a 'PATH' property, which contains the ID
4468 * of a blob property with the value of the MST path information. Calling this
4469 * function with replace pointing to the connector's path_blob_ptr, length and
4470 * data set for the new path information, obj_holds_id set to the connector's
4471 * base object, and prop_holds_id set to the path property name, will perform
4472 * a completely atomic update. The access to path_blob_ptr is protected by the
4473 * caller holding a lock on the connector.
4475 static int drm_property_replace_global_blob(struct drm_device *dev,
4476 struct drm_property_blob **replace,
4479 struct drm_mode_object *obj_holds_id,
4480 struct drm_property *prop_holds_id)
4482 struct drm_property_blob *new_blob = NULL;
4483 struct drm_property_blob *old_blob = NULL;
4486 WARN_ON(replace == NULL);
4488 old_blob = *replace;
4490 if (length && data) {
4491 new_blob = drm_property_create_blob(dev, length, data);
4492 if (IS_ERR(new_blob))
4493 return PTR_ERR(new_blob);
4496 /* This does not need to be synchronised with blob_lock, as the
4497 * get_properties ioctl locks all modesetting objects, and
4498 * obj_holds_id must be locked before calling here, so we cannot
4499 * have its value out of sync with the list membership modified
4500 * below under blob_lock. */
4502 ret = drm_object_property_set_value(obj_holds_id,
4505 new_blob->base.id : 0);
4510 drm_property_unreference_blob(old_blob);
4511 *replace = new_blob;
4516 drm_property_unreference_blob(new_blob);
4521 * drm_mode_getblob_ioctl - get the contents of a blob property value
4524 * @file_priv: DRM file info
4526 * This function retrieves the contents of a blob property. The value stored in
4527 * an object's blob property is just a normal modeset object id.
4529 * Called by the user via ioctl.
4532 * Zero on success, negative errno on failure.
4534 int drm_mode_getblob_ioctl(struct drm_device *dev,
4535 void *data, struct drm_file *file_priv)
4537 struct drm_mode_get_blob *out_resp = data;
4538 struct drm_property_blob *blob;
4540 void __user *blob_ptr;
4542 if (!drm_core_check_feature(dev, DRIVER_MODESET))
4545 drm_modeset_lock_all(dev);
4546 mutex_lock(&dev->mode_config.blob_lock);
4547 blob = __drm_property_lookup_blob(dev, out_resp->blob_id);
4553 if (out_resp->length == blob->length) {
4554 blob_ptr = (void __user *)(unsigned long)out_resp->data;
4555 if (copy_to_user(blob_ptr, blob->data, blob->length)) {
4560 out_resp->length = blob->length;
4563 mutex_unlock(&dev->mode_config.blob_lock);
4564 drm_modeset_unlock_all(dev);
4569 * drm_mode_createblob_ioctl - create a new blob property
4572 * @file_priv: DRM file info
4574 * This function creates a new blob property with user-defined values. In order
4575 * to give us sensible validation and checking when creating, rather than at
4576 * every potential use, we also require a type to be provided upfront.
4578 * Called by the user via ioctl.
4581 * Zero on success, negative errno on failure.
4583 int drm_mode_createblob_ioctl(struct drm_device *dev,
4584 void *data, struct drm_file *file_priv)
4586 struct drm_mode_create_blob *out_resp = data;
4587 struct drm_property_blob *blob;
4588 void __user *blob_ptr;
4591 if (!drm_core_check_feature(dev, DRIVER_MODESET))
4594 blob = drm_property_create_blob(dev, out_resp->length, NULL);
4596 return PTR_ERR(blob);
4598 blob_ptr = (void __user *)(unsigned long)out_resp->data;
4599 if (copy_from_user(blob->data, blob_ptr, out_resp->length)) {
4604 /* Dropping the lock between create_blob and our access here is safe
4605 * as only the same file_priv can remove the blob; at this point, it is
4606 * not associated with any file_priv. */
4607 mutex_lock(&dev->mode_config.blob_lock);
4608 out_resp->blob_id = blob->base.id;
4609 list_add_tail(&blob->head_file, &file_priv->blobs);
4610 mutex_unlock(&dev->mode_config.blob_lock);
4615 drm_property_unreference_blob(blob);
4620 * drm_mode_destroyblob_ioctl - destroy a user blob property
4623 * @file_priv: DRM file info
4625 * Destroy an existing user-defined blob property.
4627 * Called by the user via ioctl.
4630 * Zero on success, negative errno on failure.
4632 int drm_mode_destroyblob_ioctl(struct drm_device *dev,
4633 void *data, struct drm_file *file_priv)
4635 struct drm_mode_destroy_blob *out_resp = data;
4636 struct drm_property_blob *blob = NULL, *bt;
4640 if (!drm_core_check_feature(dev, DRIVER_MODESET))
4643 mutex_lock(&dev->mode_config.blob_lock);
4644 blob = __drm_property_lookup_blob(dev, out_resp->blob_id);
4650 /* Ensure the property was actually created by this user. */
4651 list_for_each_entry(bt, &file_priv->blobs, head_file) {
4663 /* We must drop head_file here, because we may not be the last
4664 * reference on the blob. */
4665 list_del_init(&blob->head_file);
4666 drm_property_unreference_blob_locked(blob);
4667 mutex_unlock(&dev->mode_config.blob_lock);
4672 mutex_unlock(&dev->mode_config.blob_lock);
4677 * drm_mode_connector_set_path_property - set tile property on connector
4678 * @connector: connector to set property on.
4679 * @path: path to use for property; must not be NULL.
4681 * This creates a property to expose to userspace to specify a
4682 * connector path. This is mainly used for DisplayPort MST where
4683 * connectors have a topology and we want to allow userspace to give
4684 * them more meaningful names.
4687 * Zero on success, negative errno on failure.
4689 int drm_mode_connector_set_path_property(struct drm_connector *connector,
4692 struct drm_device *dev = connector->dev;
4695 ret = drm_property_replace_global_blob(dev,
4696 &connector->path_blob_ptr,
4700 dev->mode_config.path_property);
4703 EXPORT_SYMBOL(drm_mode_connector_set_path_property);
4706 * drm_mode_connector_set_tile_property - set tile property on connector
4707 * @connector: connector to set property on.
4709 * This looks up the tile information for a connector, and creates a
4710 * property for userspace to parse if it exists. The property is of
4711 * the form of 8 integers using ':' as a separator.
4714 * Zero on success, errno on failure.
4716 int drm_mode_connector_set_tile_property(struct drm_connector *connector)
4718 struct drm_device *dev = connector->dev;
4722 if (!connector->has_tile) {
4723 ret = drm_property_replace_global_blob(dev,
4724 &connector->tile_blob_ptr,
4728 dev->mode_config.tile_property);
4732 snprintf(tile, 256, "%d:%d:%d:%d:%d:%d:%d:%d",
4733 connector->tile_group->id, connector->tile_is_single_monitor,
4734 connector->num_h_tile, connector->num_v_tile,
4735 connector->tile_h_loc, connector->tile_v_loc,
4736 connector->tile_h_size, connector->tile_v_size);
4738 ret = drm_property_replace_global_blob(dev,
4739 &connector->tile_blob_ptr,
4743 dev->mode_config.tile_property);
4746 EXPORT_SYMBOL(drm_mode_connector_set_tile_property);
4749 * drm_mode_connector_update_edid_property - update the edid property of a connector
4750 * @connector: drm connector
4751 * @edid: new value of the edid property
4753 * This function creates a new blob modeset object and assigns its id to the
4754 * connector's edid property.
4757 * Zero on success, negative errno on failure.
4759 int drm_mode_connector_update_edid_property(struct drm_connector *connector,
4760 const struct edid *edid)
4762 struct drm_device *dev = connector->dev;
4766 /* ignore requests to set edid when overridden */
4767 if (connector->override_edid)
4771 size = EDID_LENGTH * (1 + edid->extensions);
4773 ret = drm_property_replace_global_blob(dev,
4774 &connector->edid_blob_ptr,
4778 dev->mode_config.edid_property);
4781 EXPORT_SYMBOL(drm_mode_connector_update_edid_property);
4783 /* Some properties could refer to dynamic refcnt'd objects, or things that
4784 * need special locking to handle lifetime issues (ie. to ensure the prop
4785 * value doesn't become invalid part way through the property update due to
4786 * race). The value returned by reference via 'obj' should be passed back
4787 * to drm_property_change_valid_put() after the property is set (and the
4788 * object to which the property is attached has a chance to take it's own
4791 bool drm_property_change_valid_get(struct drm_property *property,
4792 uint64_t value, struct drm_mode_object **ref)
4796 if (property->flags & DRM_MODE_PROP_IMMUTABLE)
4801 if (drm_property_type_is(property, DRM_MODE_PROP_RANGE)) {
4802 if (value < property->values[0] || value > property->values[1])
4805 } else if (drm_property_type_is(property, DRM_MODE_PROP_SIGNED_RANGE)) {
4806 int64_t svalue = U642I64(value);
4808 if (svalue < U642I64(property->values[0]) ||
4809 svalue > U642I64(property->values[1]))
4812 } else if (drm_property_type_is(property, DRM_MODE_PROP_BITMASK)) {
4813 uint64_t valid_mask = 0;
4815 for (i = 0; i < property->num_values; i++)
4816 valid_mask |= (1ULL << property->values[i]);
4817 return !(value & ~valid_mask);
4818 } else if (drm_property_type_is(property, DRM_MODE_PROP_BLOB)) {
4819 struct drm_property_blob *blob;
4824 blob = drm_property_lookup_blob(property->dev, value);
4831 } else if (drm_property_type_is(property, DRM_MODE_PROP_OBJECT)) {
4832 /* a zero value for an object property translates to null: */
4836 /* handle refcnt'd objects specially: */
4837 if (property->values[0] == DRM_MODE_OBJECT_FB) {
4838 struct drm_framebuffer *fb;
4839 fb = drm_framebuffer_lookup(property->dev, value);
4847 return _object_find(property->dev, value, property->values[0]) != NULL;
4851 for (i = 0; i < property->num_values; i++)
4852 if (property->values[i] == value)
4857 void drm_property_change_valid_put(struct drm_property *property,
4858 struct drm_mode_object *ref)
4863 if (drm_property_type_is(property, DRM_MODE_PROP_OBJECT)) {
4864 if (property->values[0] == DRM_MODE_OBJECT_FB)
4865 drm_framebuffer_unreference(obj_to_fb(ref));
4866 } else if (drm_property_type_is(property, DRM_MODE_PROP_BLOB))
4867 drm_property_unreference_blob(obj_to_blob(ref));
4871 * drm_mode_connector_property_set_ioctl - set the current value of a connector property
4874 * @file_priv: DRM file info
4876 * This function sets the current value for a connectors's property. It also
4877 * calls into a driver's ->set_property callback to update the hardware state
4879 * Called by the user via ioctl.
4882 * Zero on success, negative errno on failure.
4884 int drm_mode_connector_property_set_ioctl(struct drm_device *dev,
4885 void *data, struct drm_file *file_priv)
4887 struct drm_mode_connector_set_property *conn_set_prop = data;
4888 struct drm_mode_obj_set_property obj_set_prop = {
4889 .value = conn_set_prop->value,
4890 .prop_id = conn_set_prop->prop_id,
4891 .obj_id = conn_set_prop->connector_id,
4892 .obj_type = DRM_MODE_OBJECT_CONNECTOR
4895 /* It does all the locking and checking we need */
4896 return drm_mode_obj_set_property_ioctl(dev, &obj_set_prop, file_priv);
4899 static int drm_mode_connector_set_obj_prop(struct drm_mode_object *obj,
4900 struct drm_property *property,
4904 struct drm_connector *connector = obj_to_connector(obj);
4906 /* Do DPMS ourselves */
4907 if (property == connector->dev->mode_config.dpms_property) {
4909 if (connector->funcs->dpms)
4910 ret = (*connector->funcs->dpms)(connector, (int)value);
4911 } else if (connector->funcs->set_property)
4912 ret = connector->funcs->set_property(connector, property, value);
4914 /* store the property value if successful */
4916 drm_object_property_set_value(&connector->base, property, value);
4920 static int drm_mode_crtc_set_obj_prop(struct drm_mode_object *obj,
4921 struct drm_property *property,
4925 struct drm_crtc *crtc = obj_to_crtc(obj);
4927 if (crtc->funcs->set_property)
4928 ret = crtc->funcs->set_property(crtc, property, value);
4930 drm_object_property_set_value(obj, property, value);
4936 * drm_mode_plane_set_obj_prop - set the value of a property
4937 * @plane: drm plane object to set property value for
4938 * @property: property to set
4939 * @value: value the property should be set to
4941 * This functions sets a given property on a given plane object. This function
4942 * calls the driver's ->set_property callback and changes the software state of
4943 * the property if the callback succeeds.
4946 * Zero on success, error code on failure.
4948 int drm_mode_plane_set_obj_prop(struct drm_plane *plane,
4949 struct drm_property *property,
4953 struct drm_mode_object *obj = &plane->base;
4955 if (plane->funcs->set_property)
4956 ret = plane->funcs->set_property(plane, property, value);
4958 drm_object_property_set_value(obj, property, value);
4962 EXPORT_SYMBOL(drm_mode_plane_set_obj_prop);
4965 * drm_mode_obj_get_properties_ioctl - get the current value of a object's property
4968 * @file_priv: DRM file info
4970 * This function retrieves the current value for an object's property. Compared
4971 * to the connector specific ioctl this one is extended to also work on crtc and
4974 * Called by the user via ioctl.
4977 * Zero on success, negative errno on failure.
4979 int drm_mode_obj_get_properties_ioctl(struct drm_device *dev, void *data,
4980 struct drm_file *file_priv)
4982 struct drm_mode_obj_get_properties *arg = data;
4983 struct drm_mode_object *obj;
4986 if (!drm_core_check_feature(dev, DRIVER_MODESET))
4989 drm_modeset_lock_all(dev);
4991 obj = drm_mode_object_find(dev, arg->obj_id, arg->obj_type);
4996 if (!obj->properties) {
5001 ret = get_properties(obj, file_priv->atomic,
5002 (uint32_t __user *)(unsigned long)(arg->props_ptr),
5003 (uint64_t __user *)(unsigned long)(arg->prop_values_ptr),
5007 drm_modeset_unlock_all(dev);
5012 * drm_mode_obj_set_property_ioctl - set the current value of an object's property
5015 * @file_priv: DRM file info
5017 * This function sets the current value for an object's property. It also calls
5018 * into a driver's ->set_property callback to update the hardware state.
5019 * Compared to the connector specific ioctl this one is extended to also work on
5020 * crtc and plane objects.
5022 * Called by the user via ioctl.
5025 * Zero on success, negative errno on failure.
5027 int drm_mode_obj_set_property_ioctl(struct drm_device *dev, void *data,
5028 struct drm_file *file_priv)
5030 struct drm_mode_obj_set_property *arg = data;
5031 struct drm_mode_object *arg_obj;
5032 struct drm_mode_object *prop_obj;
5033 struct drm_property *property;
5034 int i, ret = -EINVAL;
5035 struct drm_mode_object *ref;
5037 if (!drm_core_check_feature(dev, DRIVER_MODESET))
5040 drm_modeset_lock_all(dev);
5042 arg_obj = drm_mode_object_find(dev, arg->obj_id, arg->obj_type);
5047 if (!arg_obj->properties)
5050 for (i = 0; i < arg_obj->properties->count; i++)
5051 if (arg_obj->properties->properties[i]->base.id == arg->prop_id)
5054 if (i == arg_obj->properties->count)
5057 prop_obj = drm_mode_object_find(dev, arg->prop_id,
5058 DRM_MODE_OBJECT_PROPERTY);
5063 property = obj_to_property(prop_obj);
5065 if (!drm_property_change_valid_get(property, arg->value, &ref))
5068 switch (arg_obj->type) {
5069 case DRM_MODE_OBJECT_CONNECTOR:
5070 ret = drm_mode_connector_set_obj_prop(arg_obj, property,
5073 case DRM_MODE_OBJECT_CRTC:
5074 ret = drm_mode_crtc_set_obj_prop(arg_obj, property, arg->value);
5076 case DRM_MODE_OBJECT_PLANE:
5077 ret = drm_mode_plane_set_obj_prop(obj_to_plane(arg_obj),
5078 property, arg->value);
5082 drm_property_change_valid_put(property, ref);
5085 drm_modeset_unlock_all(dev);
5090 * drm_mode_connector_attach_encoder - attach a connector to an encoder
5091 * @connector: connector to attach
5092 * @encoder: encoder to attach @connector to
5094 * This function links up a connector to an encoder. Note that the routing
5095 * restrictions between encoders and crtcs are exposed to userspace through the
5096 * possible_clones and possible_crtcs bitmasks.
5099 * Zero on success, negative errno on failure.
5101 int drm_mode_connector_attach_encoder(struct drm_connector *connector,
5102 struct drm_encoder *encoder)
5106 for (i = 0; i < DRM_CONNECTOR_MAX_ENCODER; i++) {
5107 if (connector->encoder_ids[i] == 0) {
5108 connector->encoder_ids[i] = encoder->base.id;
5114 EXPORT_SYMBOL(drm_mode_connector_attach_encoder);
5117 * drm_mode_crtc_set_gamma_size - set the gamma table size
5118 * @crtc: CRTC to set the gamma table size for
5119 * @gamma_size: size of the gamma table
5121 * Drivers which support gamma tables should set this to the supported gamma
5122 * table size when initializing the CRTC. Currently the drm core only supports a
5123 * fixed gamma table size.
5126 * Zero on success, negative errno on failure.
5128 int drm_mode_crtc_set_gamma_size(struct drm_crtc *crtc,
5131 crtc->gamma_size = gamma_size;
5133 crtc->gamma_store = kcalloc(gamma_size, sizeof(uint16_t) * 3,
5135 if (!crtc->gamma_store) {
5136 crtc->gamma_size = 0;
5142 EXPORT_SYMBOL(drm_mode_crtc_set_gamma_size);
5145 * drm_mode_gamma_set_ioctl - set the gamma table
5148 * @file_priv: DRM file info
5150 * Set the gamma table of a CRTC to the one passed in by the user. Userspace can
5151 * inquire the required gamma table size through drm_mode_gamma_get_ioctl.
5153 * Called by the user via ioctl.
5156 * Zero on success, negative errno on failure.
5158 int drm_mode_gamma_set_ioctl(struct drm_device *dev,
5159 void *data, struct drm_file *file_priv)
5161 struct drm_mode_crtc_lut *crtc_lut = data;
5162 struct drm_crtc *crtc;
5163 void *r_base, *g_base, *b_base;
5167 if (!drm_core_check_feature(dev, DRIVER_MODESET))
5170 drm_modeset_lock_all(dev);
5171 crtc = drm_crtc_find(dev, crtc_lut->crtc_id);
5177 if (crtc->funcs->gamma_set == NULL) {
5182 /* memcpy into gamma store */
5183 if (crtc_lut->gamma_size != crtc->gamma_size) {
5188 size = crtc_lut->gamma_size * (sizeof(uint16_t));
5189 r_base = crtc->gamma_store;
5190 if (copy_from_user(r_base, (void __user *)(unsigned long)crtc_lut->red, size)) {
5195 g_base = r_base + size;
5196 if (copy_from_user(g_base, (void __user *)(unsigned long)crtc_lut->green, size)) {
5201 b_base = g_base + size;
5202 if (copy_from_user(b_base, (void __user *)(unsigned long)crtc_lut->blue, size)) {
5207 crtc->funcs->gamma_set(crtc, r_base, g_base, b_base, 0, crtc->gamma_size);
5210 drm_modeset_unlock_all(dev);
5216 * drm_mode_gamma_get_ioctl - get the gamma table
5219 * @file_priv: DRM file info
5221 * Copy the current gamma table into the storage provided. This also provides
5222 * the gamma table size the driver expects, which can be used to size the
5223 * allocated storage.
5225 * Called by the user via ioctl.
5228 * Zero on success, negative errno on failure.
5230 int drm_mode_gamma_get_ioctl(struct drm_device *dev,
5231 void *data, struct drm_file *file_priv)
5233 struct drm_mode_crtc_lut *crtc_lut = data;
5234 struct drm_crtc *crtc;
5235 void *r_base, *g_base, *b_base;
5239 if (!drm_core_check_feature(dev, DRIVER_MODESET))
5242 drm_modeset_lock_all(dev);
5243 crtc = drm_crtc_find(dev, crtc_lut->crtc_id);
5249 /* memcpy into gamma store */
5250 if (crtc_lut->gamma_size != crtc->gamma_size) {
5255 size = crtc_lut->gamma_size * (sizeof(uint16_t));
5256 r_base = crtc->gamma_store;
5257 if (copy_to_user((void __user *)(unsigned long)crtc_lut->red, r_base, size)) {
5262 g_base = r_base + size;
5263 if (copy_to_user((void __user *)(unsigned long)crtc_lut->green, g_base, size)) {
5268 b_base = g_base + size;
5269 if (copy_to_user((void __user *)(unsigned long)crtc_lut->blue, b_base, size)) {
5274 drm_modeset_unlock_all(dev);
5279 * drm_mode_page_flip_ioctl - schedule an asynchronous fb update
5282 * @file_priv: DRM file info
5284 * This schedules an asynchronous update on a given CRTC, called page flip.
5285 * Optionally a drm event is generated to signal the completion of the event.
5286 * Generic drivers cannot assume that a pageflip with changed framebuffer
5287 * properties (including driver specific metadata like tiling layout) will work,
5288 * but some drivers support e.g. pixel format changes through the pageflip
5291 * Called by the user via ioctl.
5294 * Zero on success, negative errno on failure.
5296 int drm_mode_page_flip_ioctl(struct drm_device *dev,
5297 void *data, struct drm_file *file_priv)
5299 struct drm_mode_crtc_page_flip *page_flip = data;
5300 struct drm_crtc *crtc;
5301 struct drm_framebuffer *fb = NULL;
5302 struct drm_pending_vblank_event *e = NULL;
5303 unsigned long flags;
5306 if (page_flip->flags & ~DRM_MODE_PAGE_FLIP_FLAGS ||
5307 page_flip->reserved != 0)
5310 if ((page_flip->flags & DRM_MODE_PAGE_FLIP_ASYNC) && !dev->mode_config.async_page_flip)
5313 crtc = drm_crtc_find(dev, page_flip->crtc_id);
5317 drm_modeset_lock_crtc(crtc, crtc->primary);
5318 if (crtc->primary->fb == NULL) {
5319 /* The framebuffer is currently unbound, presumably
5320 * due to a hotplug event, that userspace has not
5327 if (crtc->funcs->page_flip == NULL)
5330 fb = drm_framebuffer_lookup(dev, page_flip->fb_id);
5337 const struct drm_plane_state *state = crtc->primary->state;
5339 ret = check_src_coords(state->src_x, state->src_y,
5340 state->src_w, state->src_h, fb);
5342 ret = drm_crtc_check_viewport(crtc, crtc->x, crtc->y, &crtc->mode, fb);
5347 if (crtc->primary->fb->pixel_format != fb->pixel_format) {
5348 DRM_DEBUG_KMS("Page flip is not allowed to change frame buffer format.\n");
5353 if (page_flip->flags & DRM_MODE_PAGE_FLIP_EVENT) {
5355 spin_lock_irqsave(&dev->event_lock, flags);
5356 if (file_priv->event_space < sizeof(e->event)) {
5357 spin_unlock_irqrestore(&dev->event_lock, flags);
5360 file_priv->event_space -= sizeof(e->event);
5361 spin_unlock_irqrestore(&dev->event_lock, flags);
5363 e = kzalloc(sizeof(*e), GFP_KERNEL);
5365 spin_lock_irqsave(&dev->event_lock, flags);
5366 file_priv->event_space += sizeof(e->event);
5367 spin_unlock_irqrestore(&dev->event_lock, flags);
5371 e->event.base.type = DRM_EVENT_FLIP_COMPLETE;
5372 e->event.base.length = sizeof(e->event);
5373 e->event.user_data = page_flip->user_data;
5374 e->base.event = &e->event.base;
5375 e->base.file_priv = file_priv;
5377 (void (*) (struct drm_pending_event *)) kfree;
5380 crtc->primary->old_fb = crtc->primary->fb;
5381 ret = crtc->funcs->page_flip(crtc, fb, e, page_flip->flags);
5383 if (page_flip->flags & DRM_MODE_PAGE_FLIP_EVENT) {
5384 spin_lock_irqsave(&dev->event_lock, flags);
5385 file_priv->event_space += sizeof(e->event);
5386 spin_unlock_irqrestore(&dev->event_lock, flags);
5389 /* Keep the old fb, don't unref it. */
5390 crtc->primary->old_fb = NULL;
5392 crtc->primary->fb = fb;
5393 /* Unref only the old framebuffer. */
5399 drm_framebuffer_unreference(fb);
5400 if (crtc->primary->old_fb)
5401 drm_framebuffer_unreference(crtc->primary->old_fb);
5402 crtc->primary->old_fb = NULL;
5403 drm_modeset_unlock_crtc(crtc);
5409 * drm_mode_config_reset - call ->reset callbacks
5412 * This functions calls all the crtc's, encoder's and connector's ->reset
5413 * callback. Drivers can use this in e.g. their driver load or resume code to
5414 * reset hardware and software state.
5416 void drm_mode_config_reset(struct drm_device *dev)
5418 struct drm_crtc *crtc;
5419 struct drm_plane *plane;
5420 struct drm_encoder *encoder;
5421 struct drm_connector *connector;
5423 drm_for_each_plane(plane, dev)
5424 if (plane->funcs->reset)
5425 plane->funcs->reset(plane);
5427 drm_for_each_crtc(crtc, dev)
5428 if (crtc->funcs->reset)
5429 crtc->funcs->reset(crtc);
5431 drm_for_each_encoder(encoder, dev)
5432 if (encoder->funcs->reset)
5433 encoder->funcs->reset(encoder);
5435 mutex_lock(&dev->mode_config.mutex);
5436 drm_for_each_connector(connector, dev)
5437 if (connector->funcs->reset)
5438 connector->funcs->reset(connector);
5439 mutex_unlock(&dev->mode_config.mutex);
5441 EXPORT_SYMBOL(drm_mode_config_reset);
5444 * drm_mode_create_dumb_ioctl - create a dumb backing storage buffer
5447 * @file_priv: DRM file info
5449 * This creates a new dumb buffer in the driver's backing storage manager (GEM,
5450 * TTM or something else entirely) and returns the resulting buffer handle. This
5451 * handle can then be wrapped up into a framebuffer modeset object.
5453 * Note that userspace is not allowed to use such objects for render
5454 * acceleration - drivers must create their own private ioctls for such a use
5457 * Called by the user via ioctl.
5460 * Zero on success, negative errno on failure.
5462 int drm_mode_create_dumb_ioctl(struct drm_device *dev,
5463 void *data, struct drm_file *file_priv)
5465 struct drm_mode_create_dumb *args = data;
5466 u32 cpp, stride, size;
5468 if (!dev->driver->dumb_create)
5470 if (!args->width || !args->height || !args->bpp)
5473 /* overflow checks for 32bit size calculations */
5474 /* NOTE: DIV_ROUND_UP() can overflow */
5475 cpp = DIV_ROUND_UP(args->bpp, 8);
5476 if (!cpp || cpp > 0xffffffffU / args->width)
5478 stride = cpp * args->width;
5479 if (args->height > 0xffffffffU / stride)
5482 /* test for wrap-around */
5483 size = args->height * stride;
5484 if (PAGE_ALIGN(size) == 0)
5488 * handle, pitch and size are output parameters. Zero them out to
5489 * prevent drivers from accidentally using uninitialized data. Since
5490 * not all existing userspace is clearing these fields properly we
5491 * cannot reject IOCTL with garbage in them.
5497 return dev->driver->dumb_create(file_priv, dev, args);
5501 * drm_mode_mmap_dumb_ioctl - create an mmap offset for a dumb backing storage buffer
5504 * @file_priv: DRM file info
5506 * Allocate an offset in the drm device node's address space to be able to
5507 * memory map a dumb buffer.
5509 * Called by the user via ioctl.
5512 * Zero on success, negative errno on failure.
5514 int drm_mode_mmap_dumb_ioctl(struct drm_device *dev,
5515 void *data, struct drm_file *file_priv)
5517 struct drm_mode_map_dumb *args = data;
5519 /* call driver ioctl to get mmap offset */
5520 if (!dev->driver->dumb_map_offset)
5523 return dev->driver->dumb_map_offset(file_priv, dev, args->handle, &args->offset);
5527 * drm_mode_destroy_dumb_ioctl - destroy a dumb backing strage buffer
5530 * @file_priv: DRM file info
5532 * This destroys the userspace handle for the given dumb backing storage buffer.
5533 * Since buffer objects must be reference counted in the kernel a buffer object
5534 * won't be immediately freed if a framebuffer modeset object still uses it.
5536 * Called by the user via ioctl.
5539 * Zero on success, negative errno on failure.
5541 int drm_mode_destroy_dumb_ioctl(struct drm_device *dev,
5542 void *data, struct drm_file *file_priv)
5544 struct drm_mode_destroy_dumb *args = data;
5546 if (!dev->driver->dumb_destroy)
5549 return dev->driver->dumb_destroy(file_priv, dev, args->handle);
5553 * drm_fb_get_bpp_depth - get the bpp/depth values for format
5554 * @format: pixel format (DRM_FORMAT_*)
5555 * @depth: storage for the depth value
5556 * @bpp: storage for the bpp value
5558 * This only supports RGB formats here for compat with code that doesn't use
5559 * pixel formats directly yet.
5561 void drm_fb_get_bpp_depth(uint32_t format, unsigned int *depth,
5566 case DRM_FORMAT_RGB332:
5567 case DRM_FORMAT_BGR233:
5571 case DRM_FORMAT_XRGB1555:
5572 case DRM_FORMAT_XBGR1555:
5573 case DRM_FORMAT_RGBX5551:
5574 case DRM_FORMAT_BGRX5551:
5575 case DRM_FORMAT_ARGB1555:
5576 case DRM_FORMAT_ABGR1555:
5577 case DRM_FORMAT_RGBA5551:
5578 case DRM_FORMAT_BGRA5551:
5582 case DRM_FORMAT_RGB565:
5583 case DRM_FORMAT_BGR565:
5587 case DRM_FORMAT_RGB888:
5588 case DRM_FORMAT_BGR888:
5592 case DRM_FORMAT_XRGB8888:
5593 case DRM_FORMAT_XBGR8888:
5594 case DRM_FORMAT_RGBX8888:
5595 case DRM_FORMAT_BGRX8888:
5599 case DRM_FORMAT_XRGB2101010:
5600 case DRM_FORMAT_XBGR2101010:
5601 case DRM_FORMAT_RGBX1010102:
5602 case DRM_FORMAT_BGRX1010102:
5603 case DRM_FORMAT_ARGB2101010:
5604 case DRM_FORMAT_ABGR2101010:
5605 case DRM_FORMAT_RGBA1010102:
5606 case DRM_FORMAT_BGRA1010102:
5610 case DRM_FORMAT_ARGB8888:
5611 case DRM_FORMAT_ABGR8888:
5612 case DRM_FORMAT_RGBA8888:
5613 case DRM_FORMAT_BGRA8888:
5618 DRM_DEBUG_KMS("unsupported pixel format %s\n",
5619 drm_get_format_name(format));
5625 EXPORT_SYMBOL(drm_fb_get_bpp_depth);
5628 * drm_format_num_planes - get the number of planes for format
5629 * @format: pixel format (DRM_FORMAT_*)
5632 * The number of planes used by the specified pixel format.
5634 int drm_format_num_planes(uint32_t format)
5637 case DRM_FORMAT_YUV410:
5638 case DRM_FORMAT_YVU410:
5639 case DRM_FORMAT_YUV411:
5640 case DRM_FORMAT_YVU411:
5641 case DRM_FORMAT_YUV420:
5642 case DRM_FORMAT_YVU420:
5643 case DRM_FORMAT_YUV422:
5644 case DRM_FORMAT_YVU422:
5645 case DRM_FORMAT_YUV444:
5646 case DRM_FORMAT_YVU444:
5648 case DRM_FORMAT_NV12:
5649 case DRM_FORMAT_NV21:
5650 case DRM_FORMAT_NV16:
5651 case DRM_FORMAT_NV61:
5652 case DRM_FORMAT_NV24:
5653 case DRM_FORMAT_NV42:
5659 EXPORT_SYMBOL(drm_format_num_planes);
5662 * drm_format_plane_cpp - determine the bytes per pixel value
5663 * @format: pixel format (DRM_FORMAT_*)
5664 * @plane: plane index
5667 * The bytes per pixel value for the specified plane.
5669 int drm_format_plane_cpp(uint32_t format, int plane)
5674 if (plane >= drm_format_num_planes(format))
5678 case DRM_FORMAT_YUYV:
5679 case DRM_FORMAT_YVYU:
5680 case DRM_FORMAT_UYVY:
5681 case DRM_FORMAT_VYUY:
5683 case DRM_FORMAT_NV12:
5684 case DRM_FORMAT_NV21:
5685 case DRM_FORMAT_NV16:
5686 case DRM_FORMAT_NV61:
5687 case DRM_FORMAT_NV24:
5688 case DRM_FORMAT_NV42:
5689 return plane ? 2 : 1;
5690 case DRM_FORMAT_YUV410:
5691 case DRM_FORMAT_YVU410:
5692 case DRM_FORMAT_YUV411:
5693 case DRM_FORMAT_YVU411:
5694 case DRM_FORMAT_YUV420:
5695 case DRM_FORMAT_YVU420:
5696 case DRM_FORMAT_YUV422:
5697 case DRM_FORMAT_YVU422:
5698 case DRM_FORMAT_YUV444:
5699 case DRM_FORMAT_YVU444:
5702 drm_fb_get_bpp_depth(format, &depth, &bpp);
5706 EXPORT_SYMBOL(drm_format_plane_cpp);
5709 * drm_format_horz_chroma_subsampling - get the horizontal chroma subsampling factor
5710 * @format: pixel format (DRM_FORMAT_*)
5713 * The horizontal chroma subsampling factor for the
5714 * specified pixel format.
5716 int drm_format_horz_chroma_subsampling(uint32_t format)
5719 case DRM_FORMAT_YUV411:
5720 case DRM_FORMAT_YVU411:
5721 case DRM_FORMAT_YUV410:
5722 case DRM_FORMAT_YVU410:
5724 case DRM_FORMAT_YUYV:
5725 case DRM_FORMAT_YVYU:
5726 case DRM_FORMAT_UYVY:
5727 case DRM_FORMAT_VYUY:
5728 case DRM_FORMAT_NV12:
5729 case DRM_FORMAT_NV21:
5730 case DRM_FORMAT_NV16:
5731 case DRM_FORMAT_NV61:
5732 case DRM_FORMAT_YUV422:
5733 case DRM_FORMAT_YVU422:
5734 case DRM_FORMAT_YUV420:
5735 case DRM_FORMAT_YVU420:
5741 EXPORT_SYMBOL(drm_format_horz_chroma_subsampling);
5744 * drm_format_vert_chroma_subsampling - get the vertical chroma subsampling factor
5745 * @format: pixel format (DRM_FORMAT_*)
5748 * The vertical chroma subsampling factor for the
5749 * specified pixel format.
5751 int drm_format_vert_chroma_subsampling(uint32_t format)
5754 case DRM_FORMAT_YUV410:
5755 case DRM_FORMAT_YVU410:
5757 case DRM_FORMAT_YUV420:
5758 case DRM_FORMAT_YVU420:
5759 case DRM_FORMAT_NV12:
5760 case DRM_FORMAT_NV21:
5766 EXPORT_SYMBOL(drm_format_vert_chroma_subsampling);
5769 * drm_rotation_simplify() - Try to simplify the rotation
5770 * @rotation: Rotation to be simplified
5771 * @supported_rotations: Supported rotations
5773 * Attempt to simplify the rotation to a form that is supported.
5774 * Eg. if the hardware supports everything except DRM_REFLECT_X
5775 * one could call this function like this:
5777 * drm_rotation_simplify(rotation, BIT(DRM_ROTATE_0) |
5778 * BIT(DRM_ROTATE_90) | BIT(DRM_ROTATE_180) |
5779 * BIT(DRM_ROTATE_270) | BIT(DRM_REFLECT_Y));
5781 * to eliminate the DRM_ROTATE_X flag. Depending on what kind of
5782 * transforms the hardware supports, this function may not
5783 * be able to produce a supported transform, so the caller should
5784 * check the result afterwards.
5786 unsigned int drm_rotation_simplify(unsigned int rotation,
5787 unsigned int supported_rotations)
5789 if (rotation & ~supported_rotations) {
5790 rotation ^= BIT(DRM_REFLECT_X) | BIT(DRM_REFLECT_Y);
5791 rotation = (rotation & DRM_REFLECT_MASK) |
5792 BIT((ffs(rotation & DRM_ROTATE_MASK) + 1) % 4);
5797 EXPORT_SYMBOL(drm_rotation_simplify);
5800 * drm_mode_config_init - initialize DRM mode_configuration structure
5803 * Initialize @dev's mode_config structure, used for tracking the graphics
5804 * configuration of @dev.
5806 * Since this initializes the modeset locks, no locking is possible. Which is no
5807 * problem, since this should happen single threaded at init time. It is the
5808 * driver's problem to ensure this guarantee.
5811 void drm_mode_config_init(struct drm_device *dev)
5813 mutex_init(&dev->mode_config.mutex);
5814 drm_modeset_lock_init(&dev->mode_config.connection_mutex);
5815 mutex_init(&dev->mode_config.idr_mutex);
5816 mutex_init(&dev->mode_config.fb_lock);
5817 mutex_init(&dev->mode_config.blob_lock);
5818 INIT_LIST_HEAD(&dev->mode_config.fb_list);
5819 INIT_LIST_HEAD(&dev->mode_config.crtc_list);
5820 INIT_LIST_HEAD(&dev->mode_config.connector_list);
5821 INIT_LIST_HEAD(&dev->mode_config.encoder_list);
5822 INIT_LIST_HEAD(&dev->mode_config.property_list);
5823 INIT_LIST_HEAD(&dev->mode_config.property_blob_list);
5824 INIT_LIST_HEAD(&dev->mode_config.plane_list);
5825 idr_init(&dev->mode_config.crtc_idr);
5826 idr_init(&dev->mode_config.tile_idr);
5828 drm_modeset_lock_all(dev);
5829 drm_mode_create_standard_properties(dev);
5830 drm_modeset_unlock_all(dev);
5832 /* Just to be sure */
5833 dev->mode_config.num_fb = 0;
5834 dev->mode_config.num_connector = 0;
5835 dev->mode_config.num_crtc = 0;
5836 dev->mode_config.num_encoder = 0;
5837 dev->mode_config.num_overlay_plane = 0;
5838 dev->mode_config.num_total_plane = 0;
5840 EXPORT_SYMBOL(drm_mode_config_init);
5843 * drm_mode_config_cleanup - free up DRM mode_config info
5846 * Free up all the connectors and CRTCs associated with this DRM device, then
5847 * free up the framebuffers and associated buffer objects.
5849 * Note that since this /should/ happen single-threaded at driver/device
5850 * teardown time, no locking is required. It's the driver's job to ensure that
5851 * this guarantee actually holds true.
5853 * FIXME: cleanup any dangling user buffer objects too
5855 void drm_mode_config_cleanup(struct drm_device *dev)
5857 struct drm_connector *connector, *ot;
5858 struct drm_crtc *crtc, *ct;
5859 struct drm_encoder *encoder, *enct;
5860 struct drm_framebuffer *fb, *fbt;
5861 struct drm_property *property, *pt;
5862 struct drm_property_blob *blob, *bt;
5863 struct drm_plane *plane, *plt;
5865 list_for_each_entry_safe(encoder, enct, &dev->mode_config.encoder_list,
5867 encoder->funcs->destroy(encoder);
5870 list_for_each_entry_safe(connector, ot,
5871 &dev->mode_config.connector_list, head) {
5872 connector->funcs->destroy(connector);
5875 list_for_each_entry_safe(property, pt, &dev->mode_config.property_list,
5877 drm_property_destroy(dev, property);
5880 list_for_each_entry_safe(blob, bt, &dev->mode_config.property_blob_list,
5882 drm_property_unreference_blob(blob);
5886 * Single-threaded teardown context, so it's not required to grab the
5887 * fb_lock to protect against concurrent fb_list access. Contrary, it
5888 * would actually deadlock with the drm_framebuffer_cleanup function.
5890 * Also, if there are any framebuffers left, that's a driver leak now,
5891 * so politely WARN about this.
5893 WARN_ON(!list_empty(&dev->mode_config.fb_list));
5894 list_for_each_entry_safe(fb, fbt, &dev->mode_config.fb_list, head) {
5895 drm_framebuffer_free(&fb->refcount);
5898 list_for_each_entry_safe(plane, plt, &dev->mode_config.plane_list,
5900 plane->funcs->destroy(plane);
5903 list_for_each_entry_safe(crtc, ct, &dev->mode_config.crtc_list, head) {
5904 crtc->funcs->destroy(crtc);
5907 idr_destroy(&dev->mode_config.tile_idr);
5908 idr_destroy(&dev->mode_config.crtc_idr);
5909 drm_modeset_lock_fini(&dev->mode_config.connection_mutex);
5911 EXPORT_SYMBOL(drm_mode_config_cleanup);
5913 struct drm_property *drm_mode_create_rotation_property(struct drm_device *dev,
5914 unsigned int supported_rotations)
5916 static const struct drm_prop_enum_list props[] = {
5917 { DRM_ROTATE_0, "rotate-0" },
5918 { DRM_ROTATE_90, "rotate-90" },
5919 { DRM_ROTATE_180, "rotate-180" },
5920 { DRM_ROTATE_270, "rotate-270" },
5921 { DRM_REFLECT_X, "reflect-x" },
5922 { DRM_REFLECT_Y, "reflect-y" },
5925 return drm_property_create_bitmask(dev, 0, "rotation",
5926 props, ARRAY_SIZE(props),
5927 supported_rotations);
5929 EXPORT_SYMBOL(drm_mode_create_rotation_property);
5934 * Tile groups are used to represent tiled monitors with a unique
5935 * integer identifier. Tiled monitors using DisplayID v1.3 have
5936 * a unique 8-byte handle, we store this in a tile group, so we
5937 * have a common identifier for all tiles in a monitor group.
5939 static void drm_tile_group_free(struct kref *kref)
5941 struct drm_tile_group *tg = container_of(kref, struct drm_tile_group, refcount);
5942 struct drm_device *dev = tg->dev;
5943 mutex_lock(&dev->mode_config.idr_mutex);
5944 idr_remove(&dev->mode_config.tile_idr, tg->id);
5945 mutex_unlock(&dev->mode_config.idr_mutex);
5950 * drm_mode_put_tile_group - drop a reference to a tile group.
5952 * @tg: tile group to drop reference to.
5954 * drop reference to tile group and free if 0.
5956 void drm_mode_put_tile_group(struct drm_device *dev,
5957 struct drm_tile_group *tg)
5959 kref_put(&tg->refcount, drm_tile_group_free);
5963 * drm_mode_get_tile_group - get a reference to an existing tile group
5965 * @topology: 8-bytes unique per monitor.
5967 * Use the unique bytes to get a reference to an existing tile group.
5970 * tile group or NULL if not found.
5972 struct drm_tile_group *drm_mode_get_tile_group(struct drm_device *dev,
5975 struct drm_tile_group *tg;
5977 mutex_lock(&dev->mode_config.idr_mutex);
5978 idr_for_each_entry(&dev->mode_config.tile_idr, tg, id) {
5979 if (!memcmp(tg->group_data, topology, 8)) {
5980 if (!kref_get_unless_zero(&tg->refcount))
5982 mutex_unlock(&dev->mode_config.idr_mutex);
5986 mutex_unlock(&dev->mode_config.idr_mutex);
5989 EXPORT_SYMBOL(drm_mode_get_tile_group);
5992 * drm_mode_create_tile_group - create a tile group from a displayid description
5994 * @topology: 8-bytes unique per monitor.
5996 * Create a tile group for the unique monitor, and get a unique
5997 * identifier for the tile group.
6000 * new tile group or error.
6002 struct drm_tile_group *drm_mode_create_tile_group(struct drm_device *dev,
6005 struct drm_tile_group *tg;
6008 tg = kzalloc(sizeof(*tg), GFP_KERNEL);
6010 return ERR_PTR(-ENOMEM);
6012 kref_init(&tg->refcount);
6013 memcpy(tg->group_data, topology, 8);
6016 mutex_lock(&dev->mode_config.idr_mutex);
6017 ret = idr_alloc(&dev->mode_config.tile_idr, tg, 1, 0, GFP_KERNEL);
6025 mutex_unlock(&dev->mode_config.idr_mutex);
6028 EXPORT_SYMBOL(drm_mode_create_tile_group);