2 * Copyright (c) 2006-2008 Intel Corporation
3 * Copyright (c) 2007 Dave Airlie <airlied@linux.ie>
5 * DRM core CRTC related functions
7 * Permission to use, copy, modify, distribute, and sell this software and its
8 * documentation for any purpose is hereby granted without fee, provided that
9 * the above copyright notice appear in all copies and that both that copyright
10 * notice and this permission notice appear in supporting documentation, and
11 * that the name of the copyright holders not be used in advertising or
12 * publicity pertaining to distribution of the software without specific,
13 * written prior permission. The copyright holders make no representations
14 * about the suitability of this software for any purpose. It is provided "as
15 * is" without express or implied warranty.
17 * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
18 * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
19 * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
20 * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
21 * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
22 * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
27 * Eric Anholt <eric@anholt.net>
28 * Dave Airlie <airlied@linux.ie>
29 * Jesse Barnes <jesse.barnes@intel.com>
32 #include <linux/kernel.h>
33 #include <linux/export.h>
34 #include <linux/moduleparam.h>
37 #include <drm/drm_crtc.h>
38 #include <drm/drm_fourcc.h>
39 #include <drm/drm_crtc_helper.h>
40 #include <drm/drm_fb_helper.h>
41 #include <drm/drm_plane_helper.h>
42 #include <drm/drm_edid.h>
44 MODULE_AUTHOR("David Airlie, Jesse Barnes");
45 MODULE_DESCRIPTION("DRM KMS helper");
46 MODULE_LICENSE("GPL and additional rights");
49 * drm_helper_move_panel_connectors_to_head() - move panels to the front in the
51 * @dev: drm device to operate on
53 * Some userspace presumes that the first connected connector is the main
54 * display, where it's supposed to display e.g. the login screen. For
55 * laptops, this should be the main panel. Use this function to sort all
56 * (eDP/LVDS) panels to the front of the connector list, instead of
57 * painstakingly trying to initialize them in the right order.
59 void drm_helper_move_panel_connectors_to_head(struct drm_device *dev)
61 struct drm_connector *connector, *tmp;
62 struct list_head panel_list;
64 INIT_LIST_HEAD(&panel_list);
66 list_for_each_entry_safe(connector, tmp,
67 &dev->mode_config.connector_list, head) {
68 if (connector->connector_type == DRM_MODE_CONNECTOR_LVDS ||
69 connector->connector_type == DRM_MODE_CONNECTOR_eDP)
70 list_move_tail(&connector->head, &panel_list);
73 list_splice(&panel_list, &dev->mode_config.connector_list);
75 EXPORT_SYMBOL(drm_helper_move_panel_connectors_to_head);
78 * drm_helper_encoder_in_use - check if a given encoder is in use
79 * @encoder: encoder to check
81 * Checks whether @encoder is with the current mode setting output configuration
82 * in use by any connector. This doesn't mean that it is actually enabled since
83 * the DPMS state is tracked separately.
86 * True if @encoder is used, false otherwise.
88 bool drm_helper_encoder_in_use(struct drm_encoder *encoder)
90 struct drm_connector *connector;
91 struct drm_device *dev = encoder->dev;
94 * We can expect this mutex to be locked if we are not panicking.
95 * Locking is currently fubar in the panic handler.
97 if (!oops_in_progress) {
98 WARN_ON(!mutex_is_locked(&dev->mode_config.mutex));
99 WARN_ON(!drm_modeset_is_locked(&dev->mode_config.connection_mutex));
102 list_for_each_entry(connector, &dev->mode_config.connector_list, head)
103 if (connector->encoder == encoder)
107 EXPORT_SYMBOL(drm_helper_encoder_in_use);
110 * drm_helper_crtc_in_use - check if a given CRTC is in a mode_config
111 * @crtc: CRTC to check
113 * Checks whether @crtc is with the current mode setting output configuration
114 * in use by any connector. This doesn't mean that it is actually enabled since
115 * the DPMS state is tracked separately.
118 * True if @crtc is used, false otherwise.
120 bool drm_helper_crtc_in_use(struct drm_crtc *crtc)
122 struct drm_encoder *encoder;
123 struct drm_device *dev = crtc->dev;
126 * We can expect this mutex to be locked if we are not panicking.
127 * Locking is currently fubar in the panic handler.
129 if (!oops_in_progress)
130 WARN_ON(!mutex_is_locked(&dev->mode_config.mutex));
132 list_for_each_entry(encoder, &dev->mode_config.encoder_list, head)
133 if (encoder->crtc == crtc && drm_helper_encoder_in_use(encoder))
137 EXPORT_SYMBOL(drm_helper_crtc_in_use);
140 drm_encoder_disable(struct drm_encoder *encoder)
142 struct drm_encoder_helper_funcs *encoder_funcs = encoder->helper_private;
145 encoder->bridge->funcs->disable(encoder->bridge);
147 if (encoder_funcs->disable)
148 (*encoder_funcs->disable)(encoder);
150 (*encoder_funcs->dpms)(encoder, DRM_MODE_DPMS_OFF);
153 encoder->bridge->funcs->post_disable(encoder->bridge);
156 static void __drm_helper_disable_unused_functions(struct drm_device *dev)
158 struct drm_encoder *encoder;
159 struct drm_crtc *crtc;
161 drm_warn_on_modeset_not_all_locked(dev);
163 list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
164 if (!drm_helper_encoder_in_use(encoder)) {
165 drm_encoder_disable(encoder);
166 /* disconnect encoder from any connector */
167 encoder->crtc = NULL;
171 list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
172 struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
173 crtc->enabled = drm_helper_crtc_in_use(crtc);
174 if (!crtc->enabled) {
175 if (crtc_funcs->disable)
176 (*crtc_funcs->disable)(crtc);
178 (*crtc_funcs->dpms)(crtc, DRM_MODE_DPMS_OFF);
179 crtc->primary->fb = NULL;
185 * drm_helper_disable_unused_functions - disable unused objects
188 * This function walks through the entire mode setting configuration of @dev. It
189 * will remove any crtc links of unused encoders and encoder links of
190 * disconnected connectors. Then it will disable all unused encoders and crtcs
191 * either by calling their disable callback if available or by calling their
192 * dpms callback with DRM_MODE_DPMS_OFF.
194 void drm_helper_disable_unused_functions(struct drm_device *dev)
196 drm_modeset_lock_all(dev);
197 __drm_helper_disable_unused_functions(dev);
198 drm_modeset_unlock_all(dev);
200 EXPORT_SYMBOL(drm_helper_disable_unused_functions);
203 * Check the CRTC we're going to map each output to vs. its current
204 * CRTC. If they don't match, we have to disable the output and the CRTC
205 * since the driver will have to re-route things.
208 drm_crtc_prepare_encoders(struct drm_device *dev)
210 struct drm_encoder_helper_funcs *encoder_funcs;
211 struct drm_encoder *encoder;
213 list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
214 encoder_funcs = encoder->helper_private;
215 /* Disable unused encoders */
216 if (encoder->crtc == NULL)
217 drm_encoder_disable(encoder);
218 /* Disable encoders whose CRTC is about to change */
219 if (encoder_funcs->get_crtc &&
220 encoder->crtc != (*encoder_funcs->get_crtc)(encoder))
221 drm_encoder_disable(encoder);
226 * drm_crtc_helper_set_mode - internal helper to set a mode
227 * @crtc: CRTC to program
229 * @x: horizontal offset into the surface
230 * @y: vertical offset into the surface
231 * @old_fb: old framebuffer, for cleanup
233 * Try to set @mode on @crtc. Give @crtc and its associated connectors a chance
234 * to fixup or reject the mode prior to trying to set it. This is an internal
235 * helper that drivers could e.g. use to update properties that require the
236 * entire output pipe to be disabled and re-enabled in a new configuration. For
237 * example for changing whether audio is enabled on a hdmi link or for changing
238 * panel fitter or dither attributes. It is also called by the
239 * drm_crtc_helper_set_config() helper function to drive the mode setting
243 * True if the mode was set successfully, false otherwise.
245 bool drm_crtc_helper_set_mode(struct drm_crtc *crtc,
246 struct drm_display_mode *mode,
248 struct drm_framebuffer *old_fb)
250 struct drm_device *dev = crtc->dev;
251 struct drm_display_mode *adjusted_mode, saved_mode;
252 struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
253 struct drm_encoder_helper_funcs *encoder_funcs;
254 int saved_x, saved_y;
256 struct drm_encoder *encoder;
259 drm_warn_on_modeset_not_all_locked(dev);
261 saved_enabled = crtc->enabled;
262 crtc->enabled = drm_helper_crtc_in_use(crtc);
266 adjusted_mode = drm_mode_duplicate(dev, mode);
267 if (!adjusted_mode) {
268 crtc->enabled = saved_enabled;
272 saved_mode = crtc->mode;
276 /* Update crtc values up front so the driver can rely on them for mode
283 /* Pass our mode to the connectors and the CRTC to give them a chance to
284 * adjust it according to limitations or connector properties, and also
285 * a chance to reject the mode entirely.
287 list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
289 if (encoder->crtc != crtc)
292 if (encoder->bridge && encoder->bridge->funcs->mode_fixup) {
293 ret = encoder->bridge->funcs->mode_fixup(
294 encoder->bridge, mode, adjusted_mode);
296 DRM_DEBUG_KMS("Bridge fixup failed\n");
301 encoder_funcs = encoder->helper_private;
302 if (!(ret = encoder_funcs->mode_fixup(encoder, mode,
304 DRM_DEBUG_KMS("Encoder fixup failed\n");
309 if (!(ret = crtc_funcs->mode_fixup(crtc, mode, adjusted_mode))) {
310 DRM_DEBUG_KMS("CRTC fixup failed\n");
313 DRM_DEBUG_KMS("[CRTC:%d]\n", crtc->base.id);
315 /* Prepare the encoders and CRTCs before setting the mode. */
316 list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
318 if (encoder->crtc != crtc)
322 encoder->bridge->funcs->disable(encoder->bridge);
324 encoder_funcs = encoder->helper_private;
325 /* Disable the encoders as the first thing we do. */
326 encoder_funcs->prepare(encoder);
329 encoder->bridge->funcs->post_disable(encoder->bridge);
332 drm_crtc_prepare_encoders(dev);
334 crtc_funcs->prepare(crtc);
336 /* Set up the DPLL and any encoders state that needs to adjust or depend
339 ret = !crtc_funcs->mode_set(crtc, mode, adjusted_mode, x, y, old_fb);
343 list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
345 if (encoder->crtc != crtc)
348 DRM_DEBUG_KMS("[ENCODER:%d:%s] set [MODE:%d:%s]\n",
349 encoder->base.id, encoder->name,
350 mode->base.id, mode->name);
351 encoder_funcs = encoder->helper_private;
352 encoder_funcs->mode_set(encoder, mode, adjusted_mode);
354 if (encoder->bridge && encoder->bridge->funcs->mode_set)
355 encoder->bridge->funcs->mode_set(encoder->bridge, mode,
359 /* Now enable the clocks, plane, pipe, and connectors that we set up. */
360 crtc_funcs->commit(crtc);
362 list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
364 if (encoder->crtc != crtc)
368 encoder->bridge->funcs->pre_enable(encoder->bridge);
370 encoder_funcs = encoder->helper_private;
371 encoder_funcs->commit(encoder);
374 encoder->bridge->funcs->enable(encoder->bridge);
377 /* Store real post-adjustment hardware mode. */
378 crtc->hwmode = *adjusted_mode;
380 /* Calculate and store various constants which
381 * are later needed by vblank and swap-completion
382 * timestamping. They are derived from true hwmode.
384 drm_calc_timestamping_constants(crtc, &crtc->hwmode);
386 /* FIXME: add subpixel order */
388 drm_mode_destroy(dev, adjusted_mode);
390 crtc->enabled = saved_enabled;
391 crtc->mode = saved_mode;
398 EXPORT_SYMBOL(drm_crtc_helper_set_mode);
401 drm_crtc_helper_disable(struct drm_crtc *crtc)
403 struct drm_device *dev = crtc->dev;
404 struct drm_connector *connector;
405 struct drm_encoder *encoder;
407 /* Decouple all encoders and their attached connectors from this crtc */
408 list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
409 if (encoder->crtc != crtc)
412 list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
413 if (connector->encoder != encoder)
416 connector->encoder = NULL;
419 * drm_helper_disable_unused_functions() ought to be
420 * doing this, but since we've decoupled the encoder
421 * from the connector above, the required connection
422 * between them is henceforth no longer available.
424 connector->dpms = DRM_MODE_DPMS_OFF;
428 __drm_helper_disable_unused_functions(dev);
432 * drm_crtc_helper_set_config - set a new config from userspace
433 * @set: mode set configuration
435 * Setup a new configuration, provided by the upper layers (either an ioctl call
436 * from userspace or internally e.g. from the fbdev support code) in @set, and
437 * enable it. This is the main helper functions for drivers that implement
438 * kernel mode setting with the crtc helper functions and the assorted
439 * ->prepare(), ->modeset() and ->commit() helper callbacks.
442 * Returns 0 on success, negative errno numbers on failure.
444 int drm_crtc_helper_set_config(struct drm_mode_set *set)
446 struct drm_device *dev;
447 struct drm_crtc *new_crtc;
448 struct drm_encoder *save_encoders, *new_encoder, *encoder;
449 bool mode_changed = false; /* if true do a full mode set */
450 bool fb_changed = false; /* if true and !mode_changed just do a flip */
451 struct drm_connector *save_connectors, *connector;
452 int count = 0, ro, fail = 0;
453 struct drm_crtc_helper_funcs *crtc_funcs;
454 struct drm_mode_set save_set;
462 BUG_ON(!set->crtc->helper_private);
464 /* Enforce sane interface api - has been abused by the fb helper. */
465 BUG_ON(!set->mode && set->fb);
466 BUG_ON(set->fb && set->num_connectors == 0);
468 crtc_funcs = set->crtc->helper_private;
474 DRM_DEBUG_KMS("[CRTC:%d] [FB:%d] #connectors=%d (x y) (%i %i)\n",
475 set->crtc->base.id, set->fb->base.id,
476 (int)set->num_connectors, set->x, set->y);
478 DRM_DEBUG_KMS("[CRTC:%d] [NOFB]\n", set->crtc->base.id);
479 drm_crtc_helper_disable(set->crtc);
483 dev = set->crtc->dev;
485 drm_warn_on_modeset_not_all_locked(dev);
488 * Allocate space for the backup of all (non-pointer) encoder and
491 save_encoders = kzalloc(dev->mode_config.num_encoder *
492 sizeof(struct drm_encoder), GFP_KERNEL);
496 save_connectors = kzalloc(dev->mode_config.num_connector *
497 sizeof(struct drm_connector), GFP_KERNEL);
498 if (!save_connectors) {
499 kfree(save_encoders);
504 * Copy data. Note that driver private data is not affected.
505 * Should anything bad happen only the expected state is
506 * restored, not the drivers personal bookkeeping.
509 list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
510 save_encoders[count++] = *encoder;
514 list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
515 save_connectors[count++] = *connector;
518 save_set.crtc = set->crtc;
519 save_set.mode = &set->crtc->mode;
520 save_set.x = set->crtc->x;
521 save_set.y = set->crtc->y;
522 save_set.fb = set->crtc->primary->fb;
524 /* We should be able to check here if the fb has the same properties
525 * and then just flip_or_move it */
526 if (set->crtc->primary->fb != set->fb) {
527 /* If we have no fb then treat it as a full mode set */
528 if (set->crtc->primary->fb == NULL) {
529 DRM_DEBUG_KMS("crtc has no fb, full mode set\n");
531 } else if (set->fb == NULL) {
533 } else if (set->fb->pixel_format !=
534 set->crtc->primary->fb->pixel_format) {
540 if (set->x != set->crtc->x || set->y != set->crtc->y)
543 if (set->mode && !drm_mode_equal(set->mode, &set->crtc->mode)) {
544 DRM_DEBUG_KMS("modes are different, full mode set\n");
545 drm_mode_debug_printmodeline(&set->crtc->mode);
546 drm_mode_debug_printmodeline(set->mode);
550 /* a) traverse passed in connector list and get encoders for them */
552 list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
553 struct drm_connector_helper_funcs *connector_funcs =
554 connector->helper_private;
555 new_encoder = connector->encoder;
556 for (ro = 0; ro < set->num_connectors; ro++) {
557 if (set->connectors[ro] == connector) {
558 new_encoder = connector_funcs->best_encoder(connector);
559 /* if we can't get an encoder for a connector
560 we are setting now - then fail */
561 if (new_encoder == NULL)
562 /* don't break so fail path works correct */
565 if (connector->dpms != DRM_MODE_DPMS_ON) {
566 DRM_DEBUG_KMS("connector dpms not on, full mode switch\n");
574 if (new_encoder != connector->encoder) {
575 DRM_DEBUG_KMS("encoder changed, full mode switch\n");
577 /* If the encoder is reused for another connector, then
578 * the appropriate crtc will be set later.
580 if (connector->encoder)
581 connector->encoder->crtc = NULL;
582 connector->encoder = new_encoder;
592 list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
593 if (!connector->encoder)
596 if (connector->encoder->crtc == set->crtc)
599 new_crtc = connector->encoder->crtc;
601 for (ro = 0; ro < set->num_connectors; ro++) {
602 if (set->connectors[ro] == connector)
603 new_crtc = set->crtc;
606 /* Make sure the new CRTC will work with the encoder */
608 !drm_encoder_crtc_ok(connector->encoder, new_crtc)) {
612 if (new_crtc != connector->encoder->crtc) {
613 DRM_DEBUG_KMS("crtc changed, full mode switch\n");
615 connector->encoder->crtc = new_crtc;
618 DRM_DEBUG_KMS("[CONNECTOR:%d:%s] to [CRTC:%d]\n",
619 connector->base.id, connector->name,
622 DRM_DEBUG_KMS("[CONNECTOR:%d:%s] to [NOCRTC]\n",
623 connector->base.id, connector->name);
627 /* mode_set_base is not a required function */
628 if (fb_changed && !crtc_funcs->mode_set_base)
632 if (drm_helper_crtc_in_use(set->crtc)) {
633 DRM_DEBUG_KMS("attempting to set mode from"
635 drm_mode_debug_printmodeline(set->mode);
636 set->crtc->primary->fb = set->fb;
637 if (!drm_crtc_helper_set_mode(set->crtc, set->mode,
640 DRM_ERROR("failed to set mode on [CRTC:%d]\n",
642 set->crtc->primary->fb = save_set.fb;
646 DRM_DEBUG_KMS("Setting connector DPMS state to on\n");
647 for (i = 0; i < set->num_connectors; i++) {
648 DRM_DEBUG_KMS("\t[CONNECTOR:%d:%s] set DPMS on\n", set->connectors[i]->base.id,
649 set->connectors[i]->name);
650 set->connectors[i]->funcs->dpms(set->connectors[i], DRM_MODE_DPMS_ON);
653 __drm_helper_disable_unused_functions(dev);
654 } else if (fb_changed) {
655 set->crtc->x = set->x;
656 set->crtc->y = set->y;
657 set->crtc->primary->fb = set->fb;
658 ret = crtc_funcs->mode_set_base(set->crtc,
659 set->x, set->y, save_set.fb);
661 set->crtc->x = save_set.x;
662 set->crtc->y = save_set.y;
663 set->crtc->primary->fb = save_set.fb;
668 kfree(save_connectors);
669 kfree(save_encoders);
673 /* Restore all previous data. */
675 list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
676 *encoder = save_encoders[count++];
680 list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
681 *connector = save_connectors[count++];
684 /* Try to restore the config */
686 !drm_crtc_helper_set_mode(save_set.crtc, save_set.mode, save_set.x,
687 save_set.y, save_set.fb))
688 DRM_ERROR("failed to restore config after modeset failure\n");
690 kfree(save_connectors);
691 kfree(save_encoders);
694 EXPORT_SYMBOL(drm_crtc_helper_set_config);
696 static int drm_helper_choose_encoder_dpms(struct drm_encoder *encoder)
698 int dpms = DRM_MODE_DPMS_OFF;
699 struct drm_connector *connector;
700 struct drm_device *dev = encoder->dev;
702 list_for_each_entry(connector, &dev->mode_config.connector_list, head)
703 if (connector->encoder == encoder)
704 if (connector->dpms < dpms)
705 dpms = connector->dpms;
709 /* Helper which handles bridge ordering around encoder dpms */
710 static void drm_helper_encoder_dpms(struct drm_encoder *encoder, int mode)
712 struct drm_bridge *bridge = encoder->bridge;
713 struct drm_encoder_helper_funcs *encoder_funcs;
716 if (mode == DRM_MODE_DPMS_ON)
717 bridge->funcs->pre_enable(bridge);
719 bridge->funcs->disable(bridge);
722 encoder_funcs = encoder->helper_private;
723 if (encoder_funcs->dpms)
724 encoder_funcs->dpms(encoder, mode);
727 if (mode == DRM_MODE_DPMS_ON)
728 bridge->funcs->enable(bridge);
730 bridge->funcs->post_disable(bridge);
734 static int drm_helper_choose_crtc_dpms(struct drm_crtc *crtc)
736 int dpms = DRM_MODE_DPMS_OFF;
737 struct drm_connector *connector;
738 struct drm_device *dev = crtc->dev;
740 list_for_each_entry(connector, &dev->mode_config.connector_list, head)
741 if (connector->encoder && connector->encoder->crtc == crtc)
742 if (connector->dpms < dpms)
743 dpms = connector->dpms;
748 * drm_helper_connector_dpms() - connector dpms helper implementation
749 * @connector: affected connector
752 * This is the main helper function provided by the crtc helper framework for
753 * implementing the DPMS connector attribute. It computes the new desired DPMS
754 * state for all encoders and crtcs in the output mesh and calls the ->dpms()
755 * callback provided by the driver appropriately.
757 void drm_helper_connector_dpms(struct drm_connector *connector, int mode)
759 struct drm_encoder *encoder = connector->encoder;
760 struct drm_crtc *crtc = encoder ? encoder->crtc : NULL;
761 int old_dpms, encoder_dpms = DRM_MODE_DPMS_OFF;
763 if (mode == connector->dpms)
766 old_dpms = connector->dpms;
767 connector->dpms = mode;
770 encoder_dpms = drm_helper_choose_encoder_dpms(encoder);
772 /* from off to on, do crtc then encoder */
773 if (mode < old_dpms) {
775 struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
776 if (crtc_funcs->dpms)
777 (*crtc_funcs->dpms) (crtc,
778 drm_helper_choose_crtc_dpms(crtc));
781 drm_helper_encoder_dpms(encoder, encoder_dpms);
784 /* from on to off, do encoder then crtc */
785 if (mode > old_dpms) {
787 drm_helper_encoder_dpms(encoder, encoder_dpms);
789 struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
790 if (crtc_funcs->dpms)
791 (*crtc_funcs->dpms) (crtc,
792 drm_helper_choose_crtc_dpms(crtc));
798 EXPORT_SYMBOL(drm_helper_connector_dpms);
801 * drm_helper_mode_fill_fb_struct - fill out framebuffer metadata
802 * @fb: drm_framebuffer object to fill out
803 * @mode_cmd: metadata from the userspace fb creation request
805 * This helper can be used in a drivers fb_create callback to pre-fill the fb's
808 void drm_helper_mode_fill_fb_struct(struct drm_framebuffer *fb,
809 struct drm_mode_fb_cmd2 *mode_cmd)
813 fb->width = mode_cmd->width;
814 fb->height = mode_cmd->height;
815 for (i = 0; i < 4; i++) {
816 fb->pitches[i] = mode_cmd->pitches[i];
817 fb->offsets[i] = mode_cmd->offsets[i];
819 drm_fb_get_bpp_depth(mode_cmd->pixel_format, &fb->depth,
820 &fb->bits_per_pixel);
821 fb->pixel_format = mode_cmd->pixel_format;
822 fb->flags = mode_cmd->flags;
824 EXPORT_SYMBOL(drm_helper_mode_fill_fb_struct);
827 * drm_helper_resume_force_mode - force-restore mode setting configuration
828 * @dev: drm_device which should be restored
830 * Drivers which use the mode setting helpers can use this function to
831 * force-restore the mode setting configuration e.g. on resume or when something
832 * else might have trampled over the hw state (like some overzealous old BIOSen
835 * This helper doesn't provide a error return value since restoring the old
836 * config should never fail due to resource allocation issues since the driver
837 * has successfully set the restored configuration already. Hence this should
838 * boil down to the equivalent of a few dpms on calls, which also don't provide
841 * Drivers where simply restoring an old configuration again might fail (e.g.
842 * due to slight differences in allocating shared resources when the
843 * configuration is restored in a different order than when userspace set it up)
844 * need to use their own restore logic.
846 void drm_helper_resume_force_mode(struct drm_device *dev)
848 struct drm_crtc *crtc;
849 struct drm_encoder *encoder;
850 struct drm_crtc_helper_funcs *crtc_funcs;
854 drm_modeset_lock_all(dev);
855 list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
860 ret = drm_crtc_helper_set_mode(crtc, &crtc->mode,
861 crtc->x, crtc->y, crtc->primary->fb);
863 /* Restoring the old config should never fail! */
865 DRM_ERROR("failed to set mode on crtc %p\n", crtc);
867 /* Turn off outputs that were already powered off */
868 if (drm_helper_choose_crtc_dpms(crtc)) {
869 list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
871 if(encoder->crtc != crtc)
874 encoder_dpms = drm_helper_choose_encoder_dpms(
877 drm_helper_encoder_dpms(encoder, encoder_dpms);
880 crtc_funcs = crtc->helper_private;
881 if (crtc_funcs->dpms)
882 (*crtc_funcs->dpms) (crtc,
883 drm_helper_choose_crtc_dpms(crtc));
887 /* disable the unused connectors while restoring the modesetting */
888 __drm_helper_disable_unused_functions(dev);
889 drm_modeset_unlock_all(dev);
891 EXPORT_SYMBOL(drm_helper_resume_force_mode);
894 * drm_helper_crtc_mode_set - mode_set implementation for atomic plane helpers
896 * @mode: DRM display mode which userspace requested
897 * @adjusted_mode: DRM display mode adjusted by ->mode_fixup callbacks
898 * @x: x offset of the CRTC scanout area on the underlying framebuffer
899 * @y: y offset of the CRTC scanout area on the underlying framebuffer
900 * @old_fb: previous framebuffer
902 * This function implements a callback useable as the ->mode_set callback
903 * required by the crtc helpers. Besides the atomic plane helper functions for
904 * the primary plane the driver must also provide the ->mode_set_nofb callback
905 * to set up the crtc.
907 * This is a transitional helper useful for converting drivers to the atomic
910 int drm_helper_crtc_mode_set(struct drm_crtc *crtc, struct drm_display_mode *mode,
911 struct drm_display_mode *adjusted_mode, int x, int y,
912 struct drm_framebuffer *old_fb)
914 struct drm_crtc_state *crtc_state;
915 struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
918 if (crtc->funcs->atomic_duplicate_state)
919 crtc_state = crtc->funcs->atomic_duplicate_state(crtc);
920 else if (crtc->state)
921 crtc_state = kmemdup(crtc->state, sizeof(*crtc_state),
924 crtc_state = kzalloc(sizeof(*crtc_state), GFP_KERNEL);
928 crtc_state->enable = true;
929 crtc_state->planes_changed = true;
930 crtc_state->mode_changed = true;
931 drm_mode_copy(&crtc_state->mode, mode);
932 drm_mode_copy(&crtc_state->adjusted_mode, adjusted_mode);
934 if (crtc_funcs->atomic_check) {
935 ret = crtc_funcs->atomic_check(crtc, crtc_state);
943 swap(crtc->state, crtc_state);
945 crtc_funcs->mode_set_nofb(crtc);
948 if (crtc->funcs->atomic_destroy_state)
949 crtc->funcs->atomic_destroy_state(crtc, crtc_state);
954 return drm_helper_crtc_mode_set_base(crtc, x, y, old_fb);
956 EXPORT_SYMBOL(drm_helper_crtc_mode_set);
959 * drm_helper_crtc_mode_set_base - mode_set_base implementation for atomic plane helpers
961 * @x: x offset of the CRTC scanout area on the underlying framebuffer
962 * @y: y offset of the CRTC scanout area on the underlying framebuffer
963 * @old_fb: previous framebuffer
965 * This function implements a callback useable as the ->mode_set_base used
966 * required by the crtc helpers. The driver must provide the atomic plane helper
967 * functions for the primary plane.
969 * This is a transitional helper useful for converting drivers to the atomic
972 int drm_helper_crtc_mode_set_base(struct drm_crtc *crtc, int x, int y,
973 struct drm_framebuffer *old_fb)
975 struct drm_plane_state *plane_state;
976 struct drm_plane *plane = crtc->primary;
978 if (plane->funcs->atomic_duplicate_state)
979 plane_state = plane->funcs->atomic_duplicate_state(plane);
980 else if (plane->state)
981 plane_state = kmemdup(plane->state, sizeof(*plane_state),
984 plane_state = kzalloc(sizeof(*plane_state), GFP_KERNEL);
988 plane_state->crtc = crtc;
989 plane_state->fb = crtc->primary->fb;
990 plane_state->crtc_x = 0;
991 plane_state->crtc_y = 0;
992 plane_state->crtc_h = crtc->mode.vdisplay;
993 plane_state->crtc_w = crtc->mode.hdisplay;
994 plane_state->src_x = x << 16;
995 plane_state->src_y = y << 16;
996 plane_state->src_h = crtc->mode.vdisplay << 16;
997 plane_state->src_w = crtc->mode.hdisplay << 16;
999 return drm_plane_helper_commit(plane, plane_state, old_fb);
1001 EXPORT_SYMBOL(drm_helper_crtc_mode_set_base);