1 /* i915_drv.c -- i830,i845,i855,i865,i915 driver -*- linux-c -*-
5 * Copyright 2003 Tungsten Graphics, Inc., Cedar Park, Texas.
8 * Permission is hereby granted, free of charge, to any person obtaining a
9 * copy of this software and associated documentation files (the
10 * "Software"), to deal in the Software without restriction, including
11 * without limitation the rights to use, copy, modify, merge, publish,
12 * distribute, sub license, and/or sell copies of the Software, and to
13 * permit persons to whom the Software is furnished to do so, subject to
14 * the following conditions:
16 * The above copyright notice and this permission notice (including the
17 * next paragraph) shall be included in all copies or substantial portions
20 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
21 * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
22 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT.
23 * IN NO EVENT SHALL TUNGSTEN GRAPHICS AND/OR ITS SUPPLIERS BE LIABLE FOR
24 * ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
25 * TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
26 * SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
30 #include <linux/device.h>
31 #include <linux/acpi.h>
33 #include <drm/i915_drm.h>
35 #include "i915_trace.h"
36 #include "intel_drv.h"
38 #include <linux/console.h>
39 #include <linux/module.h>
40 #include <linux/pm_runtime.h>
41 #include <drm/drm_crtc_helper.h>
43 static struct drm_driver driver;
45 #define GEN_DEFAULT_PIPEOFFSETS \
46 .pipe_offsets = { PIPE_A_OFFSET, PIPE_B_OFFSET, \
47 PIPE_C_OFFSET, PIPE_EDP_OFFSET }, \
48 .trans_offsets = { TRANSCODER_A_OFFSET, TRANSCODER_B_OFFSET, \
49 TRANSCODER_C_OFFSET, TRANSCODER_EDP_OFFSET }, \
50 .palette_offsets = { PALETTE_A_OFFSET, PALETTE_B_OFFSET }
52 #define GEN_CHV_PIPEOFFSETS \
53 .pipe_offsets = { PIPE_A_OFFSET, PIPE_B_OFFSET, \
54 CHV_PIPE_C_OFFSET }, \
55 .trans_offsets = { TRANSCODER_A_OFFSET, TRANSCODER_B_OFFSET, \
56 CHV_TRANSCODER_C_OFFSET, }, \
57 .palette_offsets = { PALETTE_A_OFFSET, PALETTE_B_OFFSET, \
58 CHV_PALETTE_C_OFFSET }
60 #define CURSOR_OFFSETS \
61 .cursor_offsets = { CURSOR_A_OFFSET, CURSOR_B_OFFSET, CHV_CURSOR_C_OFFSET }
63 #define IVB_CURSOR_OFFSETS \
64 .cursor_offsets = { CURSOR_A_OFFSET, IVB_CURSOR_B_OFFSET, IVB_CURSOR_C_OFFSET }
66 static const struct intel_device_info intel_i830_info = {
67 .gen = 2, .is_mobile = 1, .cursor_needs_physical = 1, .num_pipes = 2,
68 .has_overlay = 1, .overlay_needs_physical = 1,
69 .ring_mask = RENDER_RING,
70 GEN_DEFAULT_PIPEOFFSETS,
74 static const struct intel_device_info intel_845g_info = {
75 .gen = 2, .num_pipes = 1,
76 .has_overlay = 1, .overlay_needs_physical = 1,
77 .ring_mask = RENDER_RING,
78 GEN_DEFAULT_PIPEOFFSETS,
82 static const struct intel_device_info intel_i85x_info = {
83 .gen = 2, .is_i85x = 1, .is_mobile = 1, .num_pipes = 2,
84 .cursor_needs_physical = 1,
85 .has_overlay = 1, .overlay_needs_physical = 1,
87 .ring_mask = RENDER_RING,
88 GEN_DEFAULT_PIPEOFFSETS,
92 static const struct intel_device_info intel_i865g_info = {
93 .gen = 2, .num_pipes = 1,
94 .has_overlay = 1, .overlay_needs_physical = 1,
95 .ring_mask = RENDER_RING,
96 GEN_DEFAULT_PIPEOFFSETS,
100 static const struct intel_device_info intel_i915g_info = {
101 .gen = 3, .is_i915g = 1, .cursor_needs_physical = 1, .num_pipes = 2,
102 .has_overlay = 1, .overlay_needs_physical = 1,
103 .ring_mask = RENDER_RING,
104 GEN_DEFAULT_PIPEOFFSETS,
107 static const struct intel_device_info intel_i915gm_info = {
108 .gen = 3, .is_mobile = 1, .num_pipes = 2,
109 .cursor_needs_physical = 1,
110 .has_overlay = 1, .overlay_needs_physical = 1,
113 .ring_mask = RENDER_RING,
114 GEN_DEFAULT_PIPEOFFSETS,
117 static const struct intel_device_info intel_i945g_info = {
118 .gen = 3, .has_hotplug = 1, .cursor_needs_physical = 1, .num_pipes = 2,
119 .has_overlay = 1, .overlay_needs_physical = 1,
120 .ring_mask = RENDER_RING,
121 GEN_DEFAULT_PIPEOFFSETS,
124 static const struct intel_device_info intel_i945gm_info = {
125 .gen = 3, .is_i945gm = 1, .is_mobile = 1, .num_pipes = 2,
126 .has_hotplug = 1, .cursor_needs_physical = 1,
127 .has_overlay = 1, .overlay_needs_physical = 1,
130 .ring_mask = RENDER_RING,
131 GEN_DEFAULT_PIPEOFFSETS,
135 static const struct intel_device_info intel_i965g_info = {
136 .gen = 4, .is_broadwater = 1, .num_pipes = 2,
139 .ring_mask = RENDER_RING,
140 GEN_DEFAULT_PIPEOFFSETS,
144 static const struct intel_device_info intel_i965gm_info = {
145 .gen = 4, .is_crestline = 1, .num_pipes = 2,
146 .is_mobile = 1, .has_fbc = 1, .has_hotplug = 1,
149 .ring_mask = RENDER_RING,
150 GEN_DEFAULT_PIPEOFFSETS,
154 static const struct intel_device_info intel_g33_info = {
155 .gen = 3, .is_g33 = 1, .num_pipes = 2,
156 .need_gfx_hws = 1, .has_hotplug = 1,
158 .ring_mask = RENDER_RING,
159 GEN_DEFAULT_PIPEOFFSETS,
163 static const struct intel_device_info intel_g45_info = {
164 .gen = 4, .is_g4x = 1, .need_gfx_hws = 1, .num_pipes = 2,
165 .has_pipe_cxsr = 1, .has_hotplug = 1,
166 .ring_mask = RENDER_RING | BSD_RING,
167 GEN_DEFAULT_PIPEOFFSETS,
171 static const struct intel_device_info intel_gm45_info = {
172 .gen = 4, .is_g4x = 1, .num_pipes = 2,
173 .is_mobile = 1, .need_gfx_hws = 1, .has_fbc = 1,
174 .has_pipe_cxsr = 1, .has_hotplug = 1,
176 .ring_mask = RENDER_RING | BSD_RING,
177 GEN_DEFAULT_PIPEOFFSETS,
181 static const struct intel_device_info intel_pineview_info = {
182 .gen = 3, .is_g33 = 1, .is_pineview = 1, .is_mobile = 1, .num_pipes = 2,
183 .need_gfx_hws = 1, .has_hotplug = 1,
185 GEN_DEFAULT_PIPEOFFSETS,
189 static const struct intel_device_info intel_ironlake_d_info = {
190 .gen = 5, .num_pipes = 2,
191 .need_gfx_hws = 1, .has_hotplug = 1,
192 .ring_mask = RENDER_RING | BSD_RING,
193 GEN_DEFAULT_PIPEOFFSETS,
197 static const struct intel_device_info intel_ironlake_m_info = {
198 .gen = 5, .is_mobile = 1, .num_pipes = 2,
199 .need_gfx_hws = 1, .has_hotplug = 1,
201 .ring_mask = RENDER_RING | BSD_RING,
202 GEN_DEFAULT_PIPEOFFSETS,
206 static const struct intel_device_info intel_sandybridge_d_info = {
207 .gen = 6, .num_pipes = 2,
208 .need_gfx_hws = 1, .has_hotplug = 1,
210 .ring_mask = RENDER_RING | BSD_RING | BLT_RING,
212 GEN_DEFAULT_PIPEOFFSETS,
216 static const struct intel_device_info intel_sandybridge_m_info = {
217 .gen = 6, .is_mobile = 1, .num_pipes = 2,
218 .need_gfx_hws = 1, .has_hotplug = 1,
220 .ring_mask = RENDER_RING | BSD_RING | BLT_RING,
222 GEN_DEFAULT_PIPEOFFSETS,
226 #define GEN7_FEATURES \
227 .gen = 7, .num_pipes = 3, \
228 .need_gfx_hws = 1, .has_hotplug = 1, \
230 .ring_mask = RENDER_RING | BSD_RING | BLT_RING, \
233 static const struct intel_device_info intel_ivybridge_d_info = {
236 GEN_DEFAULT_PIPEOFFSETS,
240 static const struct intel_device_info intel_ivybridge_m_info = {
244 GEN_DEFAULT_PIPEOFFSETS,
248 static const struct intel_device_info intel_ivybridge_q_info = {
251 .num_pipes = 0, /* legal, last one wins */
252 GEN_DEFAULT_PIPEOFFSETS,
256 static const struct intel_device_info intel_valleyview_m_info = {
261 .display_mmio_offset = VLV_DISPLAY_BASE,
262 .has_fbc = 0, /* legal, last one wins */
263 .has_llc = 0, /* legal, last one wins */
264 GEN_DEFAULT_PIPEOFFSETS,
268 static const struct intel_device_info intel_valleyview_d_info = {
272 .display_mmio_offset = VLV_DISPLAY_BASE,
273 .has_fbc = 0, /* legal, last one wins */
274 .has_llc = 0, /* legal, last one wins */
275 GEN_DEFAULT_PIPEOFFSETS,
279 static const struct intel_device_info intel_haswell_d_info = {
284 .ring_mask = RENDER_RING | BSD_RING | BLT_RING | VEBOX_RING,
285 GEN_DEFAULT_PIPEOFFSETS,
289 static const struct intel_device_info intel_haswell_m_info = {
295 .ring_mask = RENDER_RING | BSD_RING | BLT_RING | VEBOX_RING,
296 GEN_DEFAULT_PIPEOFFSETS,
300 static const struct intel_device_info intel_broadwell_d_info = {
301 .gen = 8, .num_pipes = 3,
302 .need_gfx_hws = 1, .has_hotplug = 1,
303 .ring_mask = RENDER_RING | BSD_RING | BLT_RING | VEBOX_RING,
308 GEN_DEFAULT_PIPEOFFSETS,
312 static const struct intel_device_info intel_broadwell_m_info = {
313 .gen = 8, .is_mobile = 1, .num_pipes = 3,
314 .need_gfx_hws = 1, .has_hotplug = 1,
315 .ring_mask = RENDER_RING | BSD_RING | BLT_RING | VEBOX_RING,
320 GEN_DEFAULT_PIPEOFFSETS,
324 static const struct intel_device_info intel_broadwell_gt3d_info = {
325 .gen = 8, .num_pipes = 3,
326 .need_gfx_hws = 1, .has_hotplug = 1,
327 .ring_mask = RENDER_RING | BSD_RING | BLT_RING | VEBOX_RING | BSD2_RING,
332 GEN_DEFAULT_PIPEOFFSETS,
336 static const struct intel_device_info intel_broadwell_gt3m_info = {
337 .gen = 8, .is_mobile = 1, .num_pipes = 3,
338 .need_gfx_hws = 1, .has_hotplug = 1,
339 .ring_mask = RENDER_RING | BSD_RING | BLT_RING | VEBOX_RING | BSD2_RING,
344 GEN_DEFAULT_PIPEOFFSETS,
348 static const struct intel_device_info intel_cherryview_info = {
349 .gen = 8, .num_pipes = 3,
350 .need_gfx_hws = 1, .has_hotplug = 1,
351 .ring_mask = RENDER_RING | BSD_RING | BLT_RING | VEBOX_RING,
353 .display_mmio_offset = VLV_DISPLAY_BASE,
358 static const struct intel_device_info intel_skylake_info = {
361 .gen = 9, .num_pipes = 3,
362 .need_gfx_hws = 1, .has_hotplug = 1,
363 .ring_mask = RENDER_RING | BSD_RING | BLT_RING | VEBOX_RING,
367 GEN_DEFAULT_PIPEOFFSETS,
371 static const struct intel_device_info intel_skylake_gt3_info = {
374 .gen = 9, .num_pipes = 3,
375 .need_gfx_hws = 1, .has_hotplug = 1,
376 .ring_mask = RENDER_RING | BSD_RING | BLT_RING | VEBOX_RING | BSD2_RING,
380 GEN_DEFAULT_PIPEOFFSETS,
384 static const struct intel_device_info intel_broxton_info = {
387 .need_gfx_hws = 1, .has_hotplug = 1,
388 .ring_mask = RENDER_RING | BSD_RING | BLT_RING | VEBOX_RING,
392 GEN_DEFAULT_PIPEOFFSETS,
397 * Make sure any device matches here are from most specific to most
398 * general. For example, since the Quanta match is based on the subsystem
399 * and subvendor IDs, we need it to come before the more general IVB
400 * PCI ID matches, otherwise we'll use the wrong info struct above.
402 #define INTEL_PCI_IDS \
403 INTEL_I830_IDS(&intel_i830_info), \
404 INTEL_I845G_IDS(&intel_845g_info), \
405 INTEL_I85X_IDS(&intel_i85x_info), \
406 INTEL_I865G_IDS(&intel_i865g_info), \
407 INTEL_I915G_IDS(&intel_i915g_info), \
408 INTEL_I915GM_IDS(&intel_i915gm_info), \
409 INTEL_I945G_IDS(&intel_i945g_info), \
410 INTEL_I945GM_IDS(&intel_i945gm_info), \
411 INTEL_I965G_IDS(&intel_i965g_info), \
412 INTEL_G33_IDS(&intel_g33_info), \
413 INTEL_I965GM_IDS(&intel_i965gm_info), \
414 INTEL_GM45_IDS(&intel_gm45_info), \
415 INTEL_G45_IDS(&intel_g45_info), \
416 INTEL_PINEVIEW_IDS(&intel_pineview_info), \
417 INTEL_IRONLAKE_D_IDS(&intel_ironlake_d_info), \
418 INTEL_IRONLAKE_M_IDS(&intel_ironlake_m_info), \
419 INTEL_SNB_D_IDS(&intel_sandybridge_d_info), \
420 INTEL_SNB_M_IDS(&intel_sandybridge_m_info), \
421 INTEL_IVB_Q_IDS(&intel_ivybridge_q_info), /* must be first IVB */ \
422 INTEL_IVB_M_IDS(&intel_ivybridge_m_info), \
423 INTEL_IVB_D_IDS(&intel_ivybridge_d_info), \
424 INTEL_HSW_D_IDS(&intel_haswell_d_info), \
425 INTEL_HSW_M_IDS(&intel_haswell_m_info), \
426 INTEL_VLV_M_IDS(&intel_valleyview_m_info), \
427 INTEL_VLV_D_IDS(&intel_valleyview_d_info), \
428 INTEL_BDW_GT12M_IDS(&intel_broadwell_m_info), \
429 INTEL_BDW_GT12D_IDS(&intel_broadwell_d_info), \
430 INTEL_BDW_GT3M_IDS(&intel_broadwell_gt3m_info), \
431 INTEL_BDW_GT3D_IDS(&intel_broadwell_gt3d_info), \
432 INTEL_CHV_IDS(&intel_cherryview_info), \
433 INTEL_SKL_GT1_IDS(&intel_skylake_info), \
434 INTEL_SKL_GT2_IDS(&intel_skylake_info), \
435 INTEL_SKL_GT3_IDS(&intel_skylake_gt3_info), \
436 INTEL_BXT_IDS(&intel_broxton_info)
438 static const struct pci_device_id pciidlist[] = { /* aka */
443 #if defined(CONFIG_DRM_I915_KMS)
444 MODULE_DEVICE_TABLE(pci, pciidlist);
447 void intel_detect_pch(struct drm_device *dev)
449 struct drm_i915_private *dev_priv = dev->dev_private;
450 struct pci_dev *pch = NULL;
452 /* In all current cases, num_pipes is equivalent to the PCH_NOP setting
453 * (which really amounts to a PCH but no South Display).
455 if (INTEL_INFO(dev)->num_pipes == 0) {
456 dev_priv->pch_type = PCH_NOP;
461 * The reason to probe ISA bridge instead of Dev31:Fun0 is to
462 * make graphics device passthrough work easy for VMM, that only
463 * need to expose ISA bridge to let driver know the real hardware
464 * underneath. This is a requirement from virtualization team.
466 * In some virtualized environments (e.g. XEN), there is irrelevant
467 * ISA bridge in the system. To work reliably, we should scan trhough
468 * all the ISA bridge devices and check for the first match, instead
469 * of only checking the first one.
471 while ((pch = pci_get_class(PCI_CLASS_BRIDGE_ISA << 8, pch))) {
472 if (pch->vendor == PCI_VENDOR_ID_INTEL) {
473 unsigned short id = pch->device & INTEL_PCH_DEVICE_ID_MASK;
474 dev_priv->pch_id = id;
476 if (id == INTEL_PCH_IBX_DEVICE_ID_TYPE) {
477 dev_priv->pch_type = PCH_IBX;
478 DRM_DEBUG_KMS("Found Ibex Peak PCH\n");
479 WARN_ON(!IS_GEN5(dev));
480 } else if (id == INTEL_PCH_CPT_DEVICE_ID_TYPE) {
481 dev_priv->pch_type = PCH_CPT;
482 DRM_DEBUG_KMS("Found CougarPoint PCH\n");
483 WARN_ON(!(IS_GEN6(dev) || IS_IVYBRIDGE(dev)));
484 } else if (id == INTEL_PCH_PPT_DEVICE_ID_TYPE) {
485 /* PantherPoint is CPT compatible */
486 dev_priv->pch_type = PCH_CPT;
487 DRM_DEBUG_KMS("Found PantherPoint PCH\n");
488 WARN_ON(!(IS_GEN6(dev) || IS_IVYBRIDGE(dev)));
489 } else if (id == INTEL_PCH_LPT_DEVICE_ID_TYPE) {
490 dev_priv->pch_type = PCH_LPT;
491 DRM_DEBUG_KMS("Found LynxPoint PCH\n");
492 WARN_ON(!IS_HASWELL(dev) && !IS_BROADWELL(dev));
493 WARN_ON(IS_HSW_ULT(dev) || IS_BDW_ULT(dev));
494 } else if (id == INTEL_PCH_LPT_LP_DEVICE_ID_TYPE) {
495 dev_priv->pch_type = PCH_LPT;
496 DRM_DEBUG_KMS("Found LynxPoint LP PCH\n");
497 WARN_ON(!IS_HASWELL(dev) && !IS_BROADWELL(dev));
498 WARN_ON(!IS_HSW_ULT(dev) && !IS_BDW_ULT(dev));
499 } else if (id == INTEL_PCH_SPT_DEVICE_ID_TYPE) {
500 dev_priv->pch_type = PCH_SPT;
501 DRM_DEBUG_KMS("Found SunrisePoint PCH\n");
502 WARN_ON(!IS_SKYLAKE(dev));
503 } else if (id == INTEL_PCH_SPT_LP_DEVICE_ID_TYPE) {
504 dev_priv->pch_type = PCH_SPT;
505 DRM_DEBUG_KMS("Found SunrisePoint LP PCH\n");
506 WARN_ON(!IS_SKYLAKE(dev));
514 DRM_DEBUG_KMS("No PCH found.\n");
519 bool i915_semaphore_is_enabled(struct drm_device *dev)
521 if (INTEL_INFO(dev)->gen < 6)
524 if (i915.semaphores >= 0)
525 return i915.semaphores;
527 /* TODO: make semaphores and Execlists play nicely together */
528 if (i915.enable_execlists)
531 /* Until we get further testing... */
535 #ifdef CONFIG_INTEL_IOMMU
536 /* Enable semaphores on SNB when IO remapping is off */
537 if (INTEL_INFO(dev)->gen == 6 && intel_iommu_gfx_mapped)
544 void intel_hpd_cancel_work(struct drm_i915_private *dev_priv)
546 spin_lock_irq(&dev_priv->irq_lock);
548 dev_priv->long_hpd_port_mask = 0;
549 dev_priv->short_hpd_port_mask = 0;
550 dev_priv->hpd_event_bits = 0;
552 spin_unlock_irq(&dev_priv->irq_lock);
554 cancel_work_sync(&dev_priv->dig_port_work);
555 cancel_work_sync(&dev_priv->hotplug_work);
556 cancel_delayed_work_sync(&dev_priv->hotplug_reenable_work);
559 void i915_firmware_load_error_print(const char *fw_path, int err)
561 DRM_ERROR("failed to load firmware %s (%d)\n", fw_path, err);
564 * If the reason is not known assume -ENOENT since that's the most
565 * usual failure mode.
570 if (!(IS_BUILTIN(CONFIG_DRM_I915) && err == -ENOENT))
574 "The driver is built-in, so to load the firmware you need to\n"
575 "include it either in the kernel (see CONFIG_EXTRA_FIRMWARE) or\n"
576 "in your initrd/initramfs image.\n");
579 static void intel_suspend_encoders(struct drm_i915_private *dev_priv)
581 struct drm_device *dev = dev_priv->dev;
582 struct drm_encoder *encoder;
584 drm_modeset_lock_all(dev);
585 list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
586 struct intel_encoder *intel_encoder = to_intel_encoder(encoder);
588 if (intel_encoder->suspend)
589 intel_encoder->suspend(intel_encoder);
591 drm_modeset_unlock_all(dev);
594 static int intel_suspend_complete(struct drm_i915_private *dev_priv);
595 static int vlv_resume_prepare(struct drm_i915_private *dev_priv,
597 static int skl_resume_prepare(struct drm_i915_private *dev_priv);
598 static int bxt_resume_prepare(struct drm_i915_private *dev_priv);
601 static int i915_drm_suspend(struct drm_device *dev)
603 struct drm_i915_private *dev_priv = dev->dev_private;
604 struct drm_crtc *crtc;
605 pci_power_t opregion_target_state;
608 /* ignore lid events during suspend */
609 mutex_lock(&dev_priv->modeset_restore_lock);
610 dev_priv->modeset_restore = MODESET_SUSPENDED;
611 mutex_unlock(&dev_priv->modeset_restore_lock);
613 /* We do a lot of poking in a lot of registers, make sure they work
615 intel_display_set_init_power(dev_priv, true);
617 drm_kms_helper_poll_disable(dev);
619 pci_save_state(dev->pdev);
621 error = i915_gem_suspend(dev);
623 dev_err(&dev->pdev->dev,
624 "GEM idle failed, resume might fail\n");
628 intel_suspend_gt_powersave(dev);
631 * Disable CRTCs directly since we want to preserve sw state
632 * for _thaw. Also, power gate the CRTC power wells.
634 drm_modeset_lock_all(dev);
635 for_each_crtc(dev, crtc)
636 intel_crtc_control(crtc, false);
637 drm_modeset_unlock_all(dev);
639 intel_dp_mst_suspend(dev);
641 intel_runtime_pm_disable_interrupts(dev_priv);
642 intel_hpd_cancel_work(dev_priv);
644 intel_suspend_encoders(dev_priv);
646 intel_suspend_hw(dev);
648 i915_gem_suspend_gtt_mappings(dev);
650 i915_save_state(dev);
652 opregion_target_state = PCI_D3cold;
653 #if IS_ENABLED(CONFIG_ACPI_SLEEP)
654 if (acpi_target_system_state() < ACPI_STATE_S3)
655 opregion_target_state = PCI_D1;
657 intel_opregion_notify_adapter(dev, opregion_target_state);
659 intel_uncore_forcewake_reset(dev, false);
660 intel_opregion_fini(dev);
662 intel_fbdev_set_suspend(dev, FBINFO_STATE_SUSPENDED, true);
664 dev_priv->suspend_count++;
666 intel_display_set_init_power(dev_priv, false);
671 static int i915_drm_suspend_late(struct drm_device *drm_dev, bool hibernation)
673 struct drm_i915_private *dev_priv = drm_dev->dev_private;
676 ret = intel_suspend_complete(dev_priv);
679 DRM_ERROR("Suspend complete failed: %d\n", ret);
684 pci_disable_device(drm_dev->pdev);
686 * During hibernation on some GEN4 platforms the BIOS may try to access
687 * the device even though it's already in D3 and hang the machine. So
688 * leave the device in D0 on those platforms and hope the BIOS will
689 * power down the device properly. Platforms where this was seen:
690 * Lenovo Thinkpad X301, X61s
693 drm_dev->pdev->subsystem_vendor == PCI_VENDOR_ID_LENOVO &&
694 INTEL_INFO(dev_priv)->gen == 4))
695 pci_set_power_state(drm_dev->pdev, PCI_D3hot);
700 int i915_suspend_legacy(struct drm_device *dev, pm_message_t state)
704 if (!dev || !dev->dev_private) {
705 DRM_ERROR("dev: %p\n", dev);
706 DRM_ERROR("DRM not initialized, aborting suspend.\n");
710 if (WARN_ON_ONCE(state.event != PM_EVENT_SUSPEND &&
711 state.event != PM_EVENT_FREEZE))
714 if (dev->switch_power_state == DRM_SWITCH_POWER_OFF)
717 error = i915_drm_suspend(dev);
721 return i915_drm_suspend_late(dev, false);
724 static int i915_drm_resume(struct drm_device *dev)
726 struct drm_i915_private *dev_priv = dev->dev_private;
728 mutex_lock(&dev->struct_mutex);
729 i915_gem_restore_gtt_mappings(dev);
730 mutex_unlock(&dev->struct_mutex);
732 i915_restore_state(dev);
733 intel_opregion_setup(dev);
735 intel_init_pch_refclk(dev);
736 drm_mode_config_reset(dev);
739 * Interrupts have to be enabled before any batches are run. If not the
740 * GPU will hang. i915_gem_init_hw() will initiate batches to
741 * update/restore the context.
743 * Modeset enabling in intel_modeset_init_hw() also needs working
746 intel_runtime_pm_enable_interrupts(dev_priv);
748 mutex_lock(&dev->struct_mutex);
749 if (i915_gem_init_hw(dev)) {
750 DRM_ERROR("failed to re-initialize GPU, declaring wedged!\n");
751 atomic_set_mask(I915_WEDGED, &dev_priv->gpu_error.reset_counter);
753 mutex_unlock(&dev->struct_mutex);
755 intel_modeset_init_hw(dev);
757 spin_lock_irq(&dev_priv->irq_lock);
758 if (dev_priv->display.hpd_irq_setup)
759 dev_priv->display.hpd_irq_setup(dev);
760 spin_unlock_irq(&dev_priv->irq_lock);
762 drm_modeset_lock_all(dev);
763 intel_modeset_setup_hw_state(dev, true);
764 drm_modeset_unlock_all(dev);
766 intel_dp_mst_resume(dev);
769 * ... but also need to make sure that hotplug processing
770 * doesn't cause havoc. Like in the driver load code we don't
771 * bother with the tiny race here where we might loose hotplug
774 intel_hpd_init(dev_priv);
775 /* Config may have changed between suspend and resume */
776 drm_helper_hpd_irq_event(dev);
778 intel_opregion_init(dev);
780 intel_fbdev_set_suspend(dev, FBINFO_STATE_RUNNING, false);
782 mutex_lock(&dev_priv->modeset_restore_lock);
783 dev_priv->modeset_restore = MODESET_DONE;
784 mutex_unlock(&dev_priv->modeset_restore_lock);
786 intel_opregion_notify_adapter(dev, PCI_D0);
788 drm_kms_helper_poll_enable(dev);
793 static int i915_drm_resume_early(struct drm_device *dev)
795 struct drm_i915_private *dev_priv = dev->dev_private;
799 * We have a resume ordering issue with the snd-hda driver also
800 * requiring our device to be power up. Due to the lack of a
801 * parent/child relationship we currently solve this with an early
804 * FIXME: This should be solved with a special hdmi sink device or
805 * similar so that power domains can be employed.
807 if (pci_enable_device(dev->pdev))
810 pci_set_master(dev->pdev);
812 if (IS_VALLEYVIEW(dev_priv))
813 ret = vlv_resume_prepare(dev_priv, false);
815 DRM_ERROR("Resume prepare failed: %d, continuing anyway\n",
818 intel_uncore_early_sanitize(dev, true);
821 ret = bxt_resume_prepare(dev_priv);
822 else if (IS_SKYLAKE(dev_priv))
823 ret = skl_resume_prepare(dev_priv);
824 else if (IS_HASWELL(dev_priv) || IS_BROADWELL(dev_priv))
825 hsw_disable_pc8(dev_priv);
827 intel_uncore_sanitize(dev);
828 intel_power_domains_init_hw(dev_priv);
833 int i915_resume_legacy(struct drm_device *dev)
837 if (dev->switch_power_state == DRM_SWITCH_POWER_OFF)
840 ret = i915_drm_resume_early(dev);
844 return i915_drm_resume(dev);
848 * i915_reset - reset chip after a hang
849 * @dev: drm device to reset
851 * Reset the chip. Useful if a hang is detected. Returns zero on successful
852 * reset or otherwise an error code.
854 * Procedure is fairly simple:
855 * - reset the chip using the reset reg
856 * - re-init context state
857 * - re-init hardware status page
858 * - re-init ring buffer
859 * - re-init interrupt state
862 int i915_reset(struct drm_device *dev)
864 struct drm_i915_private *dev_priv = dev->dev_private;
871 intel_reset_gt_powersave(dev);
873 mutex_lock(&dev->struct_mutex);
877 simulated = dev_priv->gpu_error.stop_rings != 0;
879 ret = intel_gpu_reset(dev);
881 /* Also reset the gpu hangman. */
883 DRM_INFO("Simulated gpu hang, resetting stop_rings\n");
884 dev_priv->gpu_error.stop_rings = 0;
885 if (ret == -ENODEV) {
886 DRM_INFO("Reset not implemented, but ignoring "
887 "error for simulated gpu hangs\n");
892 if (i915_stop_ring_allow_warn(dev_priv))
893 pr_notice("drm/i915: Resetting chip after gpu hang\n");
896 DRM_ERROR("Failed to reset chip: %i\n", ret);
897 mutex_unlock(&dev->struct_mutex);
901 intel_overlay_reset(dev_priv);
903 /* Ok, now get things going again... */
906 * Everything depends on having the GTT running, so we need to start
907 * there. Fortunately we don't need to do this unless we reset the
908 * chip at a PCI level.
910 * Next we need to restore the context, but we don't use those
913 * Ring buffer needs to be re-initialized in the KMS case, or if X
914 * was running at the time of the reset (i.e. we weren't VT
918 /* Used to prevent gem_check_wedged returning -EAGAIN during gpu reset */
919 dev_priv->gpu_error.reload_in_reset = true;
921 ret = i915_gem_init_hw(dev);
923 dev_priv->gpu_error.reload_in_reset = false;
925 mutex_unlock(&dev->struct_mutex);
927 DRM_ERROR("Failed hw init on reset %d\n", ret);
932 * rps/rc6 re-init is necessary to restore state lost after the
933 * reset and the re-install of gt irqs. Skip for ironlake per
934 * previous concerns that it doesn't respond well to some forms
935 * of re-init after reset.
937 if (INTEL_INFO(dev)->gen > 5)
938 intel_enable_gt_powersave(dev);
943 static int i915_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
945 struct intel_device_info *intel_info =
946 (struct intel_device_info *) ent->driver_data;
948 if (IS_PRELIMINARY_HW(intel_info) && !i915.preliminary_hw_support) {
949 DRM_INFO("This hardware requires preliminary hardware support.\n"
950 "See CONFIG_DRM_I915_PRELIMINARY_HW_SUPPORT, and/or modparam preliminary_hw_support\n");
954 /* Only bind to function 0 of the device. Early generations
955 * used function 1 as a placeholder for multi-head. This causes
956 * us confusion instead, especially on the systems where both
957 * functions have the same PCI-ID!
959 if (PCI_FUNC(pdev->devfn))
962 driver.driver_features &= ~(DRIVER_USE_AGP);
964 return drm_get_pci_dev(pdev, ent, &driver);
968 i915_pci_remove(struct pci_dev *pdev)
970 struct drm_device *dev = pci_get_drvdata(pdev);
975 static int i915_pm_suspend(struct device *dev)
977 struct pci_dev *pdev = to_pci_dev(dev);
978 struct drm_device *drm_dev = pci_get_drvdata(pdev);
980 if (!drm_dev || !drm_dev->dev_private) {
981 dev_err(dev, "DRM not initialized, aborting suspend.\n");
985 if (drm_dev->switch_power_state == DRM_SWITCH_POWER_OFF)
988 return i915_drm_suspend(drm_dev);
991 static int i915_pm_suspend_late(struct device *dev)
993 struct drm_device *drm_dev = dev_to_i915(dev)->dev;
996 * We have a suspend ordering issue with the snd-hda driver also
997 * requiring our device to be power up. Due to the lack of a
998 * parent/child relationship we currently solve this with an late
1001 * FIXME: This should be solved with a special hdmi sink device or
1002 * similar so that power domains can be employed.
1004 if (drm_dev->switch_power_state == DRM_SWITCH_POWER_OFF)
1007 return i915_drm_suspend_late(drm_dev, false);
1010 static int i915_pm_poweroff_late(struct device *dev)
1012 struct drm_device *drm_dev = dev_to_i915(dev)->dev;
1014 if (drm_dev->switch_power_state == DRM_SWITCH_POWER_OFF)
1017 return i915_drm_suspend_late(drm_dev, true);
1020 static int i915_pm_resume_early(struct device *dev)
1022 struct drm_device *drm_dev = dev_to_i915(dev)->dev;
1024 if (drm_dev->switch_power_state == DRM_SWITCH_POWER_OFF)
1027 return i915_drm_resume_early(drm_dev);
1030 static int i915_pm_resume(struct device *dev)
1032 struct drm_device *drm_dev = dev_to_i915(dev)->dev;
1034 if (drm_dev->switch_power_state == DRM_SWITCH_POWER_OFF)
1037 return i915_drm_resume(drm_dev);
1040 static int skl_suspend_complete(struct drm_i915_private *dev_priv)
1042 /* Enabling DC6 is not a hard requirement to enter runtime D3 */
1045 * This is to ensure that CSR isn't identified as loaded before
1046 * CSR-loading program is called during runtime-resume.
1048 intel_csr_load_status_set(dev_priv, FW_UNINITIALIZED);
1050 skl_uninit_cdclk(dev_priv);
1055 static int hsw_suspend_complete(struct drm_i915_private *dev_priv)
1057 hsw_enable_pc8(dev_priv);
1062 static int bxt_suspend_complete(struct drm_i915_private *dev_priv)
1064 struct drm_device *dev = dev_priv->dev;
1066 /* TODO: when DC5 support is added disable DC5 here. */
1068 broxton_ddi_phy_uninit(dev);
1069 broxton_uninit_cdclk(dev);
1070 bxt_enable_dc9(dev_priv);
1075 static int bxt_resume_prepare(struct drm_i915_private *dev_priv)
1077 struct drm_device *dev = dev_priv->dev;
1079 /* TODO: when CSR FW support is added make sure the FW is loaded */
1081 bxt_disable_dc9(dev_priv);
1084 * TODO: when DC5 support is added enable DC5 here if the CSR FW
1087 broxton_init_cdclk(dev);
1088 broxton_ddi_phy_init(dev);
1089 intel_prepare_ddi(dev);
1094 static int skl_resume_prepare(struct drm_i915_private *dev_priv)
1096 struct drm_device *dev = dev_priv->dev;
1098 skl_init_cdclk(dev_priv);
1099 intel_csr_load_program(dev);
1105 * Save all Gunit registers that may be lost after a D3 and a subsequent
1106 * S0i[R123] transition. The list of registers needing a save/restore is
1107 * defined in the VLV2_S0IXRegs document. This documents marks all Gunit
1108 * registers in the following way:
1109 * - Driver: saved/restored by the driver
1110 * - Punit : saved/restored by the Punit firmware
1111 * - No, w/o marking: no need to save/restore, since the register is R/O or
1112 * used internally by the HW in a way that doesn't depend
1113 * keeping the content across a suspend/resume.
1114 * - Debug : used for debugging
1116 * We save/restore all registers marked with 'Driver', with the following
1118 * - Registers out of use, including also registers marked with 'Debug'.
1119 * These have no effect on the driver's operation, so we don't save/restore
1120 * them to reduce the overhead.
1121 * - Registers that are fully setup by an initialization function called from
1122 * the resume path. For example many clock gating and RPS/RC6 registers.
1123 * - Registers that provide the right functionality with their reset defaults.
1125 * TODO: Except for registers that based on the above 3 criteria can be safely
1126 * ignored, we save/restore all others, practically treating the HW context as
1127 * a black-box for the driver. Further investigation is needed to reduce the
1128 * saved/restored registers even further, by following the same 3 criteria.
1130 static void vlv_save_gunit_s0ix_state(struct drm_i915_private *dev_priv)
1132 struct vlv_s0ix_state *s = &dev_priv->vlv_s0ix_state;
1135 /* GAM 0x4000-0x4770 */
1136 s->wr_watermark = I915_READ(GEN7_WR_WATERMARK);
1137 s->gfx_prio_ctrl = I915_READ(GEN7_GFX_PRIO_CTRL);
1138 s->arb_mode = I915_READ(ARB_MODE);
1139 s->gfx_pend_tlb0 = I915_READ(GEN7_GFX_PEND_TLB0);
1140 s->gfx_pend_tlb1 = I915_READ(GEN7_GFX_PEND_TLB1);
1142 for (i = 0; i < ARRAY_SIZE(s->lra_limits); i++)
1143 s->lra_limits[i] = I915_READ(GEN7_LRA_LIMITS_BASE + i * 4);
1145 s->media_max_req_count = I915_READ(GEN7_MEDIA_MAX_REQ_COUNT);
1146 s->gfx_max_req_count = I915_READ(GEN7_GFX_MAX_REQ_COUNT);
1148 s->render_hwsp = I915_READ(RENDER_HWS_PGA_GEN7);
1149 s->ecochk = I915_READ(GAM_ECOCHK);
1150 s->bsd_hwsp = I915_READ(BSD_HWS_PGA_GEN7);
1151 s->blt_hwsp = I915_READ(BLT_HWS_PGA_GEN7);
1153 s->tlb_rd_addr = I915_READ(GEN7_TLB_RD_ADDR);
1155 /* MBC 0x9024-0x91D0, 0x8500 */
1156 s->g3dctl = I915_READ(VLV_G3DCTL);
1157 s->gsckgctl = I915_READ(VLV_GSCKGCTL);
1158 s->mbctl = I915_READ(GEN6_MBCTL);
1160 /* GCP 0x9400-0x9424, 0x8100-0x810C */
1161 s->ucgctl1 = I915_READ(GEN6_UCGCTL1);
1162 s->ucgctl3 = I915_READ(GEN6_UCGCTL3);
1163 s->rcgctl1 = I915_READ(GEN6_RCGCTL1);
1164 s->rcgctl2 = I915_READ(GEN6_RCGCTL2);
1165 s->rstctl = I915_READ(GEN6_RSTCTL);
1166 s->misccpctl = I915_READ(GEN7_MISCCPCTL);
1168 /* GPM 0xA000-0xAA84, 0x8000-0x80FC */
1169 s->gfxpause = I915_READ(GEN6_GFXPAUSE);
1170 s->rpdeuhwtc = I915_READ(GEN6_RPDEUHWTC);
1171 s->rpdeuc = I915_READ(GEN6_RPDEUC);
1172 s->ecobus = I915_READ(ECOBUS);
1173 s->pwrdwnupctl = I915_READ(VLV_PWRDWNUPCTL);
1174 s->rp_down_timeout = I915_READ(GEN6_RP_DOWN_TIMEOUT);
1175 s->rp_deucsw = I915_READ(GEN6_RPDEUCSW);
1176 s->rcubmabdtmr = I915_READ(GEN6_RCUBMABDTMR);
1177 s->rcedata = I915_READ(VLV_RCEDATA);
1178 s->spare2gh = I915_READ(VLV_SPAREG2H);
1180 /* Display CZ domain, 0x4400C-0x4402C, 0x4F000-0x4F11F */
1181 s->gt_imr = I915_READ(GTIMR);
1182 s->gt_ier = I915_READ(GTIER);
1183 s->pm_imr = I915_READ(GEN6_PMIMR);
1184 s->pm_ier = I915_READ(GEN6_PMIER);
1186 for (i = 0; i < ARRAY_SIZE(s->gt_scratch); i++)
1187 s->gt_scratch[i] = I915_READ(GEN7_GT_SCRATCH_BASE + i * 4);
1189 /* GT SA CZ domain, 0x100000-0x138124 */
1190 s->tilectl = I915_READ(TILECTL);
1191 s->gt_fifoctl = I915_READ(GTFIFOCTL);
1192 s->gtlc_wake_ctrl = I915_READ(VLV_GTLC_WAKE_CTRL);
1193 s->gtlc_survive = I915_READ(VLV_GTLC_SURVIVABILITY_REG);
1194 s->pmwgicz = I915_READ(VLV_PMWGICZ);
1196 /* Gunit-Display CZ domain, 0x182028-0x1821CF */
1197 s->gu_ctl0 = I915_READ(VLV_GU_CTL0);
1198 s->gu_ctl1 = I915_READ(VLV_GU_CTL1);
1199 s->pcbr = I915_READ(VLV_PCBR);
1200 s->clock_gate_dis2 = I915_READ(VLV_GUNIT_CLOCK_GATE2);
1203 * Not saving any of:
1204 * DFT, 0x9800-0x9EC0
1205 * SARB, 0xB000-0xB1FC
1206 * GAC, 0x5208-0x524C, 0x14000-0x14C000
1211 static void vlv_restore_gunit_s0ix_state(struct drm_i915_private *dev_priv)
1213 struct vlv_s0ix_state *s = &dev_priv->vlv_s0ix_state;
1217 /* GAM 0x4000-0x4770 */
1218 I915_WRITE(GEN7_WR_WATERMARK, s->wr_watermark);
1219 I915_WRITE(GEN7_GFX_PRIO_CTRL, s->gfx_prio_ctrl);
1220 I915_WRITE(ARB_MODE, s->arb_mode | (0xffff << 16));
1221 I915_WRITE(GEN7_GFX_PEND_TLB0, s->gfx_pend_tlb0);
1222 I915_WRITE(GEN7_GFX_PEND_TLB1, s->gfx_pend_tlb1);
1224 for (i = 0; i < ARRAY_SIZE(s->lra_limits); i++)
1225 I915_WRITE(GEN7_LRA_LIMITS_BASE + i * 4, s->lra_limits[i]);
1227 I915_WRITE(GEN7_MEDIA_MAX_REQ_COUNT, s->media_max_req_count);
1228 I915_WRITE(GEN7_GFX_MAX_REQ_COUNT, s->gfx_max_req_count);
1230 I915_WRITE(RENDER_HWS_PGA_GEN7, s->render_hwsp);
1231 I915_WRITE(GAM_ECOCHK, s->ecochk);
1232 I915_WRITE(BSD_HWS_PGA_GEN7, s->bsd_hwsp);
1233 I915_WRITE(BLT_HWS_PGA_GEN7, s->blt_hwsp);
1235 I915_WRITE(GEN7_TLB_RD_ADDR, s->tlb_rd_addr);
1237 /* MBC 0x9024-0x91D0, 0x8500 */
1238 I915_WRITE(VLV_G3DCTL, s->g3dctl);
1239 I915_WRITE(VLV_GSCKGCTL, s->gsckgctl);
1240 I915_WRITE(GEN6_MBCTL, s->mbctl);
1242 /* GCP 0x9400-0x9424, 0x8100-0x810C */
1243 I915_WRITE(GEN6_UCGCTL1, s->ucgctl1);
1244 I915_WRITE(GEN6_UCGCTL3, s->ucgctl3);
1245 I915_WRITE(GEN6_RCGCTL1, s->rcgctl1);
1246 I915_WRITE(GEN6_RCGCTL2, s->rcgctl2);
1247 I915_WRITE(GEN6_RSTCTL, s->rstctl);
1248 I915_WRITE(GEN7_MISCCPCTL, s->misccpctl);
1250 /* GPM 0xA000-0xAA84, 0x8000-0x80FC */
1251 I915_WRITE(GEN6_GFXPAUSE, s->gfxpause);
1252 I915_WRITE(GEN6_RPDEUHWTC, s->rpdeuhwtc);
1253 I915_WRITE(GEN6_RPDEUC, s->rpdeuc);
1254 I915_WRITE(ECOBUS, s->ecobus);
1255 I915_WRITE(VLV_PWRDWNUPCTL, s->pwrdwnupctl);
1256 I915_WRITE(GEN6_RP_DOWN_TIMEOUT,s->rp_down_timeout);
1257 I915_WRITE(GEN6_RPDEUCSW, s->rp_deucsw);
1258 I915_WRITE(GEN6_RCUBMABDTMR, s->rcubmabdtmr);
1259 I915_WRITE(VLV_RCEDATA, s->rcedata);
1260 I915_WRITE(VLV_SPAREG2H, s->spare2gh);
1262 /* Display CZ domain, 0x4400C-0x4402C, 0x4F000-0x4F11F */
1263 I915_WRITE(GTIMR, s->gt_imr);
1264 I915_WRITE(GTIER, s->gt_ier);
1265 I915_WRITE(GEN6_PMIMR, s->pm_imr);
1266 I915_WRITE(GEN6_PMIER, s->pm_ier);
1268 for (i = 0; i < ARRAY_SIZE(s->gt_scratch); i++)
1269 I915_WRITE(GEN7_GT_SCRATCH_BASE + i * 4, s->gt_scratch[i]);
1271 /* GT SA CZ domain, 0x100000-0x138124 */
1272 I915_WRITE(TILECTL, s->tilectl);
1273 I915_WRITE(GTFIFOCTL, s->gt_fifoctl);
1275 * Preserve the GT allow wake and GFX force clock bit, they are not
1276 * be restored, as they are used to control the s0ix suspend/resume
1277 * sequence by the caller.
1279 val = I915_READ(VLV_GTLC_WAKE_CTRL);
1280 val &= VLV_GTLC_ALLOWWAKEREQ;
1281 val |= s->gtlc_wake_ctrl & ~VLV_GTLC_ALLOWWAKEREQ;
1282 I915_WRITE(VLV_GTLC_WAKE_CTRL, val);
1284 val = I915_READ(VLV_GTLC_SURVIVABILITY_REG);
1285 val &= VLV_GFX_CLK_FORCE_ON_BIT;
1286 val |= s->gtlc_survive & ~VLV_GFX_CLK_FORCE_ON_BIT;
1287 I915_WRITE(VLV_GTLC_SURVIVABILITY_REG, val);
1289 I915_WRITE(VLV_PMWGICZ, s->pmwgicz);
1291 /* Gunit-Display CZ domain, 0x182028-0x1821CF */
1292 I915_WRITE(VLV_GU_CTL0, s->gu_ctl0);
1293 I915_WRITE(VLV_GU_CTL1, s->gu_ctl1);
1294 I915_WRITE(VLV_PCBR, s->pcbr);
1295 I915_WRITE(VLV_GUNIT_CLOCK_GATE2, s->clock_gate_dis2);
1298 int vlv_force_gfx_clock(struct drm_i915_private *dev_priv, bool force_on)
1303 #define COND (I915_READ(VLV_GTLC_SURVIVABILITY_REG) & VLV_GFX_CLK_STATUS_BIT)
1305 val = I915_READ(VLV_GTLC_SURVIVABILITY_REG);
1306 val &= ~VLV_GFX_CLK_FORCE_ON_BIT;
1308 val |= VLV_GFX_CLK_FORCE_ON_BIT;
1309 I915_WRITE(VLV_GTLC_SURVIVABILITY_REG, val);
1314 err = wait_for(COND, 20);
1316 DRM_ERROR("timeout waiting for GFX clock force-on (%08x)\n",
1317 I915_READ(VLV_GTLC_SURVIVABILITY_REG));
1323 static int vlv_allow_gt_wake(struct drm_i915_private *dev_priv, bool allow)
1328 val = I915_READ(VLV_GTLC_WAKE_CTRL);
1329 val &= ~VLV_GTLC_ALLOWWAKEREQ;
1331 val |= VLV_GTLC_ALLOWWAKEREQ;
1332 I915_WRITE(VLV_GTLC_WAKE_CTRL, val);
1333 POSTING_READ(VLV_GTLC_WAKE_CTRL);
1335 #define COND (!!(I915_READ(VLV_GTLC_PW_STATUS) & VLV_GTLC_ALLOWWAKEACK) == \
1337 err = wait_for(COND, 1);
1339 DRM_ERROR("timeout disabling GT waking\n");
1344 static int vlv_wait_for_gt_wells(struct drm_i915_private *dev_priv,
1351 mask = VLV_GTLC_PW_MEDIA_STATUS_MASK | VLV_GTLC_PW_RENDER_STATUS_MASK;
1352 val = wait_for_on ? mask : 0;
1353 #define COND ((I915_READ(VLV_GTLC_PW_STATUS) & mask) == val)
1357 DRM_DEBUG_KMS("waiting for GT wells to go %s (%08x)\n",
1358 wait_for_on ? "on" : "off",
1359 I915_READ(VLV_GTLC_PW_STATUS));
1362 * RC6 transitioning can be delayed up to 2 msec (see
1363 * valleyview_enable_rps), use 3 msec for safety.
1365 err = wait_for(COND, 3);
1367 DRM_ERROR("timeout waiting for GT wells to go %s\n",
1368 wait_for_on ? "on" : "off");
1374 static void vlv_check_no_gt_access(struct drm_i915_private *dev_priv)
1376 if (!(I915_READ(VLV_GTLC_PW_STATUS) & VLV_GTLC_ALLOWWAKEERR))
1379 DRM_ERROR("GT register access while GT waking disabled\n");
1380 I915_WRITE(VLV_GTLC_PW_STATUS, VLV_GTLC_ALLOWWAKEERR);
1383 static int vlv_suspend_complete(struct drm_i915_private *dev_priv)
1389 * Bspec defines the following GT well on flags as debug only, so
1390 * don't treat them as hard failures.
1392 (void)vlv_wait_for_gt_wells(dev_priv, false);
1394 mask = VLV_GTLC_RENDER_CTX_EXISTS | VLV_GTLC_MEDIA_CTX_EXISTS;
1395 WARN_ON((I915_READ(VLV_GTLC_WAKE_CTRL) & mask) != mask);
1397 vlv_check_no_gt_access(dev_priv);
1399 err = vlv_force_gfx_clock(dev_priv, true);
1403 err = vlv_allow_gt_wake(dev_priv, false);
1407 if (!IS_CHERRYVIEW(dev_priv->dev))
1408 vlv_save_gunit_s0ix_state(dev_priv);
1410 err = vlv_force_gfx_clock(dev_priv, false);
1417 /* For safety always re-enable waking and disable gfx clock forcing */
1418 vlv_allow_gt_wake(dev_priv, true);
1420 vlv_force_gfx_clock(dev_priv, false);
1425 static int vlv_resume_prepare(struct drm_i915_private *dev_priv,
1428 struct drm_device *dev = dev_priv->dev;
1433 * If any of the steps fail just try to continue, that's the best we
1434 * can do at this point. Return the first error code (which will also
1435 * leave RPM permanently disabled).
1437 ret = vlv_force_gfx_clock(dev_priv, true);
1439 if (!IS_CHERRYVIEW(dev_priv->dev))
1440 vlv_restore_gunit_s0ix_state(dev_priv);
1442 err = vlv_allow_gt_wake(dev_priv, true);
1446 err = vlv_force_gfx_clock(dev_priv, false);
1450 vlv_check_no_gt_access(dev_priv);
1453 intel_init_clock_gating(dev);
1454 i915_gem_restore_fences(dev);
1460 static int intel_runtime_suspend(struct device *device)
1462 struct pci_dev *pdev = to_pci_dev(device);
1463 struct drm_device *dev = pci_get_drvdata(pdev);
1464 struct drm_i915_private *dev_priv = dev->dev_private;
1467 if (WARN_ON_ONCE(!(dev_priv->rps.enabled && intel_enable_rc6(dev))))
1470 if (WARN_ON_ONCE(!HAS_RUNTIME_PM(dev)))
1473 DRM_DEBUG_KMS("Suspending device\n");
1476 * We could deadlock here in case another thread holding struct_mutex
1477 * calls RPM suspend concurrently, since the RPM suspend will wait
1478 * first for this RPM suspend to finish. In this case the concurrent
1479 * RPM resume will be followed by its RPM suspend counterpart. Still
1480 * for consistency return -EAGAIN, which will reschedule this suspend.
1482 if (!mutex_trylock(&dev->struct_mutex)) {
1483 DRM_DEBUG_KMS("device lock contention, deffering suspend\n");
1485 * Bump the expiration timestamp, otherwise the suspend won't
1488 pm_runtime_mark_last_busy(device);
1493 * We are safe here against re-faults, since the fault handler takes
1496 i915_gem_release_all_mmaps(dev_priv);
1497 mutex_unlock(&dev->struct_mutex);
1499 intel_suspend_gt_powersave(dev);
1500 intel_runtime_pm_disable_interrupts(dev_priv);
1502 ret = intel_suspend_complete(dev_priv);
1504 DRM_ERROR("Runtime suspend failed, disabling it (%d)\n", ret);
1505 intel_runtime_pm_enable_interrupts(dev_priv);
1510 cancel_delayed_work_sync(&dev_priv->gpu_error.hangcheck_work);
1511 intel_uncore_forcewake_reset(dev, false);
1512 dev_priv->pm.suspended = true;
1515 * FIXME: We really should find a document that references the arguments
1518 if (IS_HASWELL(dev)) {
1520 * current versions of firmware which depend on this opregion
1521 * notification have repurposed the D1 definition to mean
1522 * "runtime suspended" vs. what you would normally expect (D3)
1523 * to distinguish it from notifications that might be sent via
1526 intel_opregion_notify_adapter(dev, PCI_D1);
1529 * On Broadwell, if we use PCI_D1 the PCH DDI ports will stop
1530 * being detected, and the call we do at intel_runtime_resume()
1531 * won't be able to restore them. Since PCI_D3hot matches the
1532 * actual specification and appears to be working, use it. Let's
1533 * assume the other non-Haswell platforms will stay the same as
1536 intel_opregion_notify_adapter(dev, PCI_D3hot);
1539 assert_forcewakes_inactive(dev_priv);
1541 DRM_DEBUG_KMS("Device suspended\n");
1545 static int intel_runtime_resume(struct device *device)
1547 struct pci_dev *pdev = to_pci_dev(device);
1548 struct drm_device *dev = pci_get_drvdata(pdev);
1549 struct drm_i915_private *dev_priv = dev->dev_private;
1552 if (WARN_ON_ONCE(!HAS_RUNTIME_PM(dev)))
1555 DRM_DEBUG_KMS("Resuming device\n");
1557 intel_opregion_notify_adapter(dev, PCI_D0);
1558 dev_priv->pm.suspended = false;
1560 if (IS_GEN6(dev_priv))
1561 intel_init_pch_refclk(dev);
1563 if (IS_BROXTON(dev))
1564 ret = bxt_resume_prepare(dev_priv);
1565 else if (IS_SKYLAKE(dev))
1566 ret = skl_resume_prepare(dev_priv);
1567 else if (IS_HASWELL(dev_priv) || IS_BROADWELL(dev_priv))
1568 hsw_disable_pc8(dev_priv);
1569 else if (IS_VALLEYVIEW(dev_priv))
1570 ret = vlv_resume_prepare(dev_priv, true);
1573 * No point of rolling back things in case of an error, as the best
1574 * we can do is to hope that things will still work (and disable RPM).
1576 i915_gem_init_swizzling(dev);
1577 gen6_update_ring_freq(dev);
1579 intel_runtime_pm_enable_interrupts(dev_priv);
1580 intel_enable_gt_powersave(dev);
1583 DRM_ERROR("Runtime resume failed, disabling it (%d)\n", ret);
1585 DRM_DEBUG_KMS("Device resumed\n");
1591 * This function implements common functionality of runtime and system
1594 static int intel_suspend_complete(struct drm_i915_private *dev_priv)
1598 if (IS_BROXTON(dev_priv))
1599 ret = bxt_suspend_complete(dev_priv);
1600 else if (IS_SKYLAKE(dev_priv))
1601 ret = skl_suspend_complete(dev_priv);
1602 else if (IS_HASWELL(dev_priv) || IS_BROADWELL(dev_priv))
1603 ret = hsw_suspend_complete(dev_priv);
1604 else if (IS_VALLEYVIEW(dev_priv))
1605 ret = vlv_suspend_complete(dev_priv);
1612 static const struct dev_pm_ops i915_pm_ops = {
1614 * S0ix (via system suspend) and S3 event handlers [PMSG_SUSPEND,
1617 .suspend = i915_pm_suspend,
1618 .suspend_late = i915_pm_suspend_late,
1619 .resume_early = i915_pm_resume_early,
1620 .resume = i915_pm_resume,
1624 * @freeze, @freeze_late : called (1) before creating the
1625 * hibernation image [PMSG_FREEZE] and
1626 * (2) after rebooting, before restoring
1627 * the image [PMSG_QUIESCE]
1628 * @thaw, @thaw_early : called (1) after creating the hibernation
1629 * image, before writing it [PMSG_THAW]
1630 * and (2) after failing to create or
1631 * restore the image [PMSG_RECOVER]
1632 * @poweroff, @poweroff_late: called after writing the hibernation
1633 * image, before rebooting [PMSG_HIBERNATE]
1634 * @restore, @restore_early : called after rebooting and restoring the
1635 * hibernation image [PMSG_RESTORE]
1637 .freeze = i915_pm_suspend,
1638 .freeze_late = i915_pm_suspend_late,
1639 .thaw_early = i915_pm_resume_early,
1640 .thaw = i915_pm_resume,
1641 .poweroff = i915_pm_suspend,
1642 .poweroff_late = i915_pm_poweroff_late,
1643 .restore_early = i915_pm_resume_early,
1644 .restore = i915_pm_resume,
1646 /* S0ix (via runtime suspend) event handlers */
1647 .runtime_suspend = intel_runtime_suspend,
1648 .runtime_resume = intel_runtime_resume,
1651 static const struct vm_operations_struct i915_gem_vm_ops = {
1652 .fault = i915_gem_fault,
1653 .open = drm_gem_vm_open,
1654 .close = drm_gem_vm_close,
1657 static const struct file_operations i915_driver_fops = {
1658 .owner = THIS_MODULE,
1660 .release = drm_release,
1661 .unlocked_ioctl = drm_ioctl,
1662 .mmap = drm_gem_mmap,
1665 #ifdef CONFIG_COMPAT
1666 .compat_ioctl = i915_compat_ioctl,
1668 .llseek = noop_llseek,
1671 static struct drm_driver driver = {
1672 /* Don't use MTRRs here; the Xserver or userspace app should
1673 * deal with them for Intel hardware.
1677 DRIVER_HAVE_IRQ | DRIVER_IRQ_SHARED | DRIVER_GEM | DRIVER_PRIME |
1679 .load = i915_driver_load,
1680 .unload = i915_driver_unload,
1681 .open = i915_driver_open,
1682 .lastclose = i915_driver_lastclose,
1683 .preclose = i915_driver_preclose,
1684 .postclose = i915_driver_postclose,
1685 .set_busid = drm_pci_set_busid,
1687 /* Used in place of i915_pm_ops for non-DRIVER_MODESET */
1688 .suspend = i915_suspend_legacy,
1689 .resume = i915_resume_legacy,
1691 .device_is_agp = i915_driver_device_is_agp,
1692 #if defined(CONFIG_DEBUG_FS)
1693 .debugfs_init = i915_debugfs_init,
1694 .debugfs_cleanup = i915_debugfs_cleanup,
1696 .gem_free_object = i915_gem_free_object,
1697 .gem_vm_ops = &i915_gem_vm_ops,
1699 .prime_handle_to_fd = drm_gem_prime_handle_to_fd,
1700 .prime_fd_to_handle = drm_gem_prime_fd_to_handle,
1701 .gem_prime_export = i915_gem_prime_export,
1702 .gem_prime_import = i915_gem_prime_import,
1704 .dumb_create = i915_gem_dumb_create,
1705 .dumb_map_offset = i915_gem_mmap_gtt,
1706 .dumb_destroy = drm_gem_dumb_destroy,
1707 .ioctls = i915_ioctls,
1708 .fops = &i915_driver_fops,
1709 .name = DRIVER_NAME,
1710 .desc = DRIVER_DESC,
1711 .date = DRIVER_DATE,
1712 .major = DRIVER_MAJOR,
1713 .minor = DRIVER_MINOR,
1714 .patchlevel = DRIVER_PATCHLEVEL,
1717 static struct pci_driver i915_pci_driver = {
1718 .name = DRIVER_NAME,
1719 .id_table = pciidlist,
1720 .probe = i915_pci_probe,
1721 .remove = i915_pci_remove,
1722 .driver.pm = &i915_pm_ops,
1725 static int __init i915_init(void)
1727 driver.num_ioctls = i915_max_ioctl;
1730 * If CONFIG_DRM_I915_KMS is set, default to KMS unless
1731 * explicitly disabled with the module pararmeter.
1733 * Otherwise, just follow the parameter (defaulting to off).
1735 * Allow optional vga_text_mode_force boot option to override
1736 * the default behavior.
1738 #if defined(CONFIG_DRM_I915_KMS)
1739 if (i915.modeset != 0)
1740 driver.driver_features |= DRIVER_MODESET;
1742 if (i915.modeset == 1)
1743 driver.driver_features |= DRIVER_MODESET;
1745 #ifdef CONFIG_VGA_CONSOLE
1746 if (vgacon_text_force() && i915.modeset == -1)
1747 driver.driver_features &= ~DRIVER_MODESET;
1750 if (!(driver.driver_features & DRIVER_MODESET)) {
1751 driver.get_vblank_timestamp = NULL;
1752 /* Silently fail loading to not upset userspace. */
1753 DRM_DEBUG_DRIVER("KMS and UMS disabled.\n");
1758 * FIXME: Note that we're lying to the DRM core here so that we can get access
1759 * to the atomic ioctl and the atomic properties. Only plane operations on
1760 * a single CRTC will actually work.
1762 if (i915.nuclear_pageflip)
1763 driver.driver_features |= DRIVER_ATOMIC;
1765 return drm_pci_init(&driver, &i915_pci_driver);
1768 static void __exit i915_exit(void)
1770 if (!(driver.driver_features & DRIVER_MODESET))
1771 return; /* Never loaded a driver. */
1773 drm_pci_exit(&driver, &i915_pci_driver);
1776 module_init(i915_init);
1777 module_exit(i915_exit);
1779 MODULE_AUTHOR("Tungsten Graphics, Inc.");
1780 MODULE_AUTHOR("Intel Corporation");
1782 MODULE_DESCRIPTION(DRIVER_DESC);
1783 MODULE_LICENSE("GPL and additional rights");