2 * Copyright © 2006-2007 Intel Corporation
4 * Permission is hereby granted, free of charge, to any person obtaining a
5 * copy of this software and associated documentation files (the "Software"),
6 * to deal in the Software without restriction, including without limitation
7 * the rights to use, copy, modify, merge, publish, distribute, sublicense,
8 * and/or sell copies of the Software, and to permit persons to whom the
9 * Software is furnished to do so, subject to the following conditions:
11 * The above copyright notice and this permission notice (including the next
12 * paragraph) shall be included in all copies or substantial portions of the
15 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
16 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
17 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
18 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
19 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
20 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
21 * DEALINGS IN THE SOFTWARE.
24 * Eric Anholt <eric@anholt.net>
27 #include <linux/dmi.h>
28 #include <linux/module.h>
29 #include <linux/input.h>
30 #include <linux/i2c.h>
31 #include <linux/kernel.h>
32 #include <linux/slab.h>
33 #include <linux/vgaarb.h>
34 #include <drm/drm_edid.h>
36 #include "intel_drv.h"
37 #include <drm/i915_drm.h>
39 #include "i915_trace.h"
40 #include <drm/drm_dp_helper.h>
41 #include <drm/drm_crtc_helper.h>
42 #include <linux/dma_remapping.h>
44 static void intel_increase_pllclock(struct drm_crtc *crtc);
45 static void intel_crtc_update_cursor(struct drm_crtc *crtc, bool on);
47 static void i9xx_crtc_clock_get(struct intel_crtc *crtc,
48 struct intel_crtc_config *pipe_config);
49 static void ironlake_pch_clock_get(struct intel_crtc *crtc,
50 struct intel_crtc_config *pipe_config);
52 static int intel_set_mode(struct drm_crtc *crtc, struct drm_display_mode *mode,
53 int x, int y, struct drm_framebuffer *old_fb);
65 typedef struct intel_limit intel_limit_t;
67 intel_range_t dot, vco, n, m, m1, m2, p, p1;
72 intel_pch_rawclk(struct drm_device *dev)
74 struct drm_i915_private *dev_priv = dev->dev_private;
76 WARN_ON(!HAS_PCH_SPLIT(dev));
78 return I915_READ(PCH_RAWCLK_FREQ) & RAWCLK_FREQ_MASK;
81 static inline u32 /* units of 100MHz */
82 intel_fdi_link_freq(struct drm_device *dev)
85 struct drm_i915_private *dev_priv = dev->dev_private;
86 return (I915_READ(FDI_PLL_BIOS_0) & FDI_PLL_FB_CLOCK_MASK) + 2;
91 static const intel_limit_t intel_limits_i8xx_dac = {
92 .dot = { .min = 25000, .max = 350000 },
93 .vco = { .min = 908000, .max = 1512000 },
94 .n = { .min = 2, .max = 16 },
95 .m = { .min = 96, .max = 140 },
96 .m1 = { .min = 18, .max = 26 },
97 .m2 = { .min = 6, .max = 16 },
98 .p = { .min = 4, .max = 128 },
99 .p1 = { .min = 2, .max = 33 },
100 .p2 = { .dot_limit = 165000,
101 .p2_slow = 4, .p2_fast = 2 },
104 static const intel_limit_t intel_limits_i8xx_dvo = {
105 .dot = { .min = 25000, .max = 350000 },
106 .vco = { .min = 908000, .max = 1512000 },
107 .n = { .min = 2, .max = 16 },
108 .m = { .min = 96, .max = 140 },
109 .m1 = { .min = 18, .max = 26 },
110 .m2 = { .min = 6, .max = 16 },
111 .p = { .min = 4, .max = 128 },
112 .p1 = { .min = 2, .max = 33 },
113 .p2 = { .dot_limit = 165000,
114 .p2_slow = 4, .p2_fast = 4 },
117 static const intel_limit_t intel_limits_i8xx_lvds = {
118 .dot = { .min = 25000, .max = 350000 },
119 .vco = { .min = 908000, .max = 1512000 },
120 .n = { .min = 2, .max = 16 },
121 .m = { .min = 96, .max = 140 },
122 .m1 = { .min = 18, .max = 26 },
123 .m2 = { .min = 6, .max = 16 },
124 .p = { .min = 4, .max = 128 },
125 .p1 = { .min = 1, .max = 6 },
126 .p2 = { .dot_limit = 165000,
127 .p2_slow = 14, .p2_fast = 7 },
130 static const intel_limit_t intel_limits_i9xx_sdvo = {
131 .dot = { .min = 20000, .max = 400000 },
132 .vco = { .min = 1400000, .max = 2800000 },
133 .n = { .min = 1, .max = 6 },
134 .m = { .min = 70, .max = 120 },
135 .m1 = { .min = 8, .max = 18 },
136 .m2 = { .min = 3, .max = 7 },
137 .p = { .min = 5, .max = 80 },
138 .p1 = { .min = 1, .max = 8 },
139 .p2 = { .dot_limit = 200000,
140 .p2_slow = 10, .p2_fast = 5 },
143 static const intel_limit_t intel_limits_i9xx_lvds = {
144 .dot = { .min = 20000, .max = 400000 },
145 .vco = { .min = 1400000, .max = 2800000 },
146 .n = { .min = 1, .max = 6 },
147 .m = { .min = 70, .max = 120 },
148 .m1 = { .min = 8, .max = 18 },
149 .m2 = { .min = 3, .max = 7 },
150 .p = { .min = 7, .max = 98 },
151 .p1 = { .min = 1, .max = 8 },
152 .p2 = { .dot_limit = 112000,
153 .p2_slow = 14, .p2_fast = 7 },
157 static const intel_limit_t intel_limits_g4x_sdvo = {
158 .dot = { .min = 25000, .max = 270000 },
159 .vco = { .min = 1750000, .max = 3500000},
160 .n = { .min = 1, .max = 4 },
161 .m = { .min = 104, .max = 138 },
162 .m1 = { .min = 17, .max = 23 },
163 .m2 = { .min = 5, .max = 11 },
164 .p = { .min = 10, .max = 30 },
165 .p1 = { .min = 1, .max = 3},
166 .p2 = { .dot_limit = 270000,
172 static const intel_limit_t intel_limits_g4x_hdmi = {
173 .dot = { .min = 22000, .max = 400000 },
174 .vco = { .min = 1750000, .max = 3500000},
175 .n = { .min = 1, .max = 4 },
176 .m = { .min = 104, .max = 138 },
177 .m1 = { .min = 16, .max = 23 },
178 .m2 = { .min = 5, .max = 11 },
179 .p = { .min = 5, .max = 80 },
180 .p1 = { .min = 1, .max = 8},
181 .p2 = { .dot_limit = 165000,
182 .p2_slow = 10, .p2_fast = 5 },
185 static const intel_limit_t intel_limits_g4x_single_channel_lvds = {
186 .dot = { .min = 20000, .max = 115000 },
187 .vco = { .min = 1750000, .max = 3500000 },
188 .n = { .min = 1, .max = 3 },
189 .m = { .min = 104, .max = 138 },
190 .m1 = { .min = 17, .max = 23 },
191 .m2 = { .min = 5, .max = 11 },
192 .p = { .min = 28, .max = 112 },
193 .p1 = { .min = 2, .max = 8 },
194 .p2 = { .dot_limit = 0,
195 .p2_slow = 14, .p2_fast = 14
199 static const intel_limit_t intel_limits_g4x_dual_channel_lvds = {
200 .dot = { .min = 80000, .max = 224000 },
201 .vco = { .min = 1750000, .max = 3500000 },
202 .n = { .min = 1, .max = 3 },
203 .m = { .min = 104, .max = 138 },
204 .m1 = { .min = 17, .max = 23 },
205 .m2 = { .min = 5, .max = 11 },
206 .p = { .min = 14, .max = 42 },
207 .p1 = { .min = 2, .max = 6 },
208 .p2 = { .dot_limit = 0,
209 .p2_slow = 7, .p2_fast = 7
213 static const intel_limit_t intel_limits_pineview_sdvo = {
214 .dot = { .min = 20000, .max = 400000},
215 .vco = { .min = 1700000, .max = 3500000 },
216 /* Pineview's Ncounter is a ring counter */
217 .n = { .min = 3, .max = 6 },
218 .m = { .min = 2, .max = 256 },
219 /* Pineview only has one combined m divider, which we treat as m2. */
220 .m1 = { .min = 0, .max = 0 },
221 .m2 = { .min = 0, .max = 254 },
222 .p = { .min = 5, .max = 80 },
223 .p1 = { .min = 1, .max = 8 },
224 .p2 = { .dot_limit = 200000,
225 .p2_slow = 10, .p2_fast = 5 },
228 static const intel_limit_t intel_limits_pineview_lvds = {
229 .dot = { .min = 20000, .max = 400000 },
230 .vco = { .min = 1700000, .max = 3500000 },
231 .n = { .min = 3, .max = 6 },
232 .m = { .min = 2, .max = 256 },
233 .m1 = { .min = 0, .max = 0 },
234 .m2 = { .min = 0, .max = 254 },
235 .p = { .min = 7, .max = 112 },
236 .p1 = { .min = 1, .max = 8 },
237 .p2 = { .dot_limit = 112000,
238 .p2_slow = 14, .p2_fast = 14 },
241 /* Ironlake / Sandybridge
243 * We calculate clock using (register_value + 2) for N/M1/M2, so here
244 * the range value for them is (actual_value - 2).
246 static const intel_limit_t intel_limits_ironlake_dac = {
247 .dot = { .min = 25000, .max = 350000 },
248 .vco = { .min = 1760000, .max = 3510000 },
249 .n = { .min = 1, .max = 5 },
250 .m = { .min = 79, .max = 127 },
251 .m1 = { .min = 12, .max = 22 },
252 .m2 = { .min = 5, .max = 9 },
253 .p = { .min = 5, .max = 80 },
254 .p1 = { .min = 1, .max = 8 },
255 .p2 = { .dot_limit = 225000,
256 .p2_slow = 10, .p2_fast = 5 },
259 static const intel_limit_t intel_limits_ironlake_single_lvds = {
260 .dot = { .min = 25000, .max = 350000 },
261 .vco = { .min = 1760000, .max = 3510000 },
262 .n = { .min = 1, .max = 3 },
263 .m = { .min = 79, .max = 118 },
264 .m1 = { .min = 12, .max = 22 },
265 .m2 = { .min = 5, .max = 9 },
266 .p = { .min = 28, .max = 112 },
267 .p1 = { .min = 2, .max = 8 },
268 .p2 = { .dot_limit = 225000,
269 .p2_slow = 14, .p2_fast = 14 },
272 static const intel_limit_t intel_limits_ironlake_dual_lvds = {
273 .dot = { .min = 25000, .max = 350000 },
274 .vco = { .min = 1760000, .max = 3510000 },
275 .n = { .min = 1, .max = 3 },
276 .m = { .min = 79, .max = 127 },
277 .m1 = { .min = 12, .max = 22 },
278 .m2 = { .min = 5, .max = 9 },
279 .p = { .min = 14, .max = 56 },
280 .p1 = { .min = 2, .max = 8 },
281 .p2 = { .dot_limit = 225000,
282 .p2_slow = 7, .p2_fast = 7 },
285 /* LVDS 100mhz refclk limits. */
286 static const intel_limit_t intel_limits_ironlake_single_lvds_100m = {
287 .dot = { .min = 25000, .max = 350000 },
288 .vco = { .min = 1760000, .max = 3510000 },
289 .n = { .min = 1, .max = 2 },
290 .m = { .min = 79, .max = 126 },
291 .m1 = { .min = 12, .max = 22 },
292 .m2 = { .min = 5, .max = 9 },
293 .p = { .min = 28, .max = 112 },
294 .p1 = { .min = 2, .max = 8 },
295 .p2 = { .dot_limit = 225000,
296 .p2_slow = 14, .p2_fast = 14 },
299 static const intel_limit_t intel_limits_ironlake_dual_lvds_100m = {
300 .dot = { .min = 25000, .max = 350000 },
301 .vco = { .min = 1760000, .max = 3510000 },
302 .n = { .min = 1, .max = 3 },
303 .m = { .min = 79, .max = 126 },
304 .m1 = { .min = 12, .max = 22 },
305 .m2 = { .min = 5, .max = 9 },
306 .p = { .min = 14, .max = 42 },
307 .p1 = { .min = 2, .max = 6 },
308 .p2 = { .dot_limit = 225000,
309 .p2_slow = 7, .p2_fast = 7 },
312 static const intel_limit_t intel_limits_vlv = {
314 * These are the data rate limits (measured in fast clocks)
315 * since those are the strictest limits we have. The fast
316 * clock and actual rate limits are more relaxed, so checking
317 * them would make no difference.
319 .dot = { .min = 25000 * 5, .max = 270000 * 5 },
320 .vco = { .min = 4000000, .max = 6000000 },
321 .n = { .min = 1, .max = 7 },
322 .m1 = { .min = 2, .max = 3 },
323 .m2 = { .min = 11, .max = 156 },
324 .p1 = { .min = 2, .max = 3 },
325 .p2 = { .p2_slow = 2, .p2_fast = 20 }, /* slow=min, fast=max */
328 static void vlv_clock(int refclk, intel_clock_t *clock)
330 clock->m = clock->m1 * clock->m2;
331 clock->p = clock->p1 * clock->p2;
332 if (WARN_ON(clock->n == 0 || clock->p == 0))
334 clock->vco = DIV_ROUND_CLOSEST(refclk * clock->m, clock->n);
335 clock->dot = DIV_ROUND_CLOSEST(clock->vco, clock->p);
339 * Returns whether any output on the specified pipe is of the specified type
341 static bool intel_pipe_has_type(struct drm_crtc *crtc, int type)
343 struct drm_device *dev = crtc->dev;
344 struct intel_encoder *encoder;
346 for_each_encoder_on_crtc(dev, crtc, encoder)
347 if (encoder->type == type)
353 static const intel_limit_t *intel_ironlake_limit(struct drm_crtc *crtc,
356 struct drm_device *dev = crtc->dev;
357 const intel_limit_t *limit;
359 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
360 if (intel_is_dual_link_lvds(dev)) {
361 if (refclk == 100000)
362 limit = &intel_limits_ironlake_dual_lvds_100m;
364 limit = &intel_limits_ironlake_dual_lvds;
366 if (refclk == 100000)
367 limit = &intel_limits_ironlake_single_lvds_100m;
369 limit = &intel_limits_ironlake_single_lvds;
372 limit = &intel_limits_ironlake_dac;
377 static const intel_limit_t *intel_g4x_limit(struct drm_crtc *crtc)
379 struct drm_device *dev = crtc->dev;
380 const intel_limit_t *limit;
382 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
383 if (intel_is_dual_link_lvds(dev))
384 limit = &intel_limits_g4x_dual_channel_lvds;
386 limit = &intel_limits_g4x_single_channel_lvds;
387 } else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_HDMI) ||
388 intel_pipe_has_type(crtc, INTEL_OUTPUT_ANALOG)) {
389 limit = &intel_limits_g4x_hdmi;
390 } else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_SDVO)) {
391 limit = &intel_limits_g4x_sdvo;
392 } else /* The option is for other outputs */
393 limit = &intel_limits_i9xx_sdvo;
398 static const intel_limit_t *intel_limit(struct drm_crtc *crtc, int refclk)
400 struct drm_device *dev = crtc->dev;
401 const intel_limit_t *limit;
403 if (HAS_PCH_SPLIT(dev))
404 limit = intel_ironlake_limit(crtc, refclk);
405 else if (IS_G4X(dev)) {
406 limit = intel_g4x_limit(crtc);
407 } else if (IS_PINEVIEW(dev)) {
408 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS))
409 limit = &intel_limits_pineview_lvds;
411 limit = &intel_limits_pineview_sdvo;
412 } else if (IS_VALLEYVIEW(dev)) {
413 limit = &intel_limits_vlv;
414 } else if (!IS_GEN2(dev)) {
415 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS))
416 limit = &intel_limits_i9xx_lvds;
418 limit = &intel_limits_i9xx_sdvo;
420 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS))
421 limit = &intel_limits_i8xx_lvds;
422 else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DVO))
423 limit = &intel_limits_i8xx_dvo;
425 limit = &intel_limits_i8xx_dac;
430 /* m1 is reserved as 0 in Pineview, n is a ring counter */
431 static void pineview_clock(int refclk, intel_clock_t *clock)
433 clock->m = clock->m2 + 2;
434 clock->p = clock->p1 * clock->p2;
435 if (WARN_ON(clock->n == 0 || clock->p == 0))
437 clock->vco = DIV_ROUND_CLOSEST(refclk * clock->m, clock->n);
438 clock->dot = DIV_ROUND_CLOSEST(clock->vco, clock->p);
441 static uint32_t i9xx_dpll_compute_m(struct dpll *dpll)
443 return 5 * (dpll->m1 + 2) + (dpll->m2 + 2);
446 static void i9xx_clock(int refclk, intel_clock_t *clock)
448 clock->m = i9xx_dpll_compute_m(clock);
449 clock->p = clock->p1 * clock->p2;
450 if (WARN_ON(clock->n + 2 == 0 || clock->p == 0))
452 clock->vco = DIV_ROUND_CLOSEST(refclk * clock->m, clock->n + 2);
453 clock->dot = DIV_ROUND_CLOSEST(clock->vco, clock->p);
456 #define INTELPllInvalid(s) do { /* DRM_DEBUG(s); */ return false; } while (0)
458 * Returns whether the given set of divisors are valid for a given refclk with
459 * the given connectors.
462 static bool intel_PLL_is_valid(struct drm_device *dev,
463 const intel_limit_t *limit,
464 const intel_clock_t *clock)
466 if (clock->n < limit->n.min || limit->n.max < clock->n)
467 INTELPllInvalid("n out of range\n");
468 if (clock->p1 < limit->p1.min || limit->p1.max < clock->p1)
469 INTELPllInvalid("p1 out of range\n");
470 if (clock->m2 < limit->m2.min || limit->m2.max < clock->m2)
471 INTELPllInvalid("m2 out of range\n");
472 if (clock->m1 < limit->m1.min || limit->m1.max < clock->m1)
473 INTELPllInvalid("m1 out of range\n");
475 if (!IS_PINEVIEW(dev) && !IS_VALLEYVIEW(dev))
476 if (clock->m1 <= clock->m2)
477 INTELPllInvalid("m1 <= m2\n");
479 if (!IS_VALLEYVIEW(dev)) {
480 if (clock->p < limit->p.min || limit->p.max < clock->p)
481 INTELPllInvalid("p out of range\n");
482 if (clock->m < limit->m.min || limit->m.max < clock->m)
483 INTELPllInvalid("m out of range\n");
486 if (clock->vco < limit->vco.min || limit->vco.max < clock->vco)
487 INTELPllInvalid("vco out of range\n");
488 /* XXX: We may need to be checking "Dot clock" depending on the multiplier,
489 * connector, etc., rather than just a single range.
491 if (clock->dot < limit->dot.min || limit->dot.max < clock->dot)
492 INTELPllInvalid("dot out of range\n");
498 i9xx_find_best_dpll(const intel_limit_t *limit, struct drm_crtc *crtc,
499 int target, int refclk, intel_clock_t *match_clock,
500 intel_clock_t *best_clock)
502 struct drm_device *dev = crtc->dev;
506 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
508 * For LVDS just rely on its current settings for dual-channel.
509 * We haven't figured out how to reliably set up different
510 * single/dual channel state, if we even can.
512 if (intel_is_dual_link_lvds(dev))
513 clock.p2 = limit->p2.p2_fast;
515 clock.p2 = limit->p2.p2_slow;
517 if (target < limit->p2.dot_limit)
518 clock.p2 = limit->p2.p2_slow;
520 clock.p2 = limit->p2.p2_fast;
523 memset(best_clock, 0, sizeof(*best_clock));
525 for (clock.m1 = limit->m1.min; clock.m1 <= limit->m1.max;
527 for (clock.m2 = limit->m2.min;
528 clock.m2 <= limit->m2.max; clock.m2++) {
529 if (clock.m2 >= clock.m1)
531 for (clock.n = limit->n.min;
532 clock.n <= limit->n.max; clock.n++) {
533 for (clock.p1 = limit->p1.min;
534 clock.p1 <= limit->p1.max; clock.p1++) {
537 i9xx_clock(refclk, &clock);
538 if (!intel_PLL_is_valid(dev, limit,
542 clock.p != match_clock->p)
545 this_err = abs(clock.dot - target);
546 if (this_err < err) {
555 return (err != target);
559 pnv_find_best_dpll(const intel_limit_t *limit, struct drm_crtc *crtc,
560 int target, int refclk, intel_clock_t *match_clock,
561 intel_clock_t *best_clock)
563 struct drm_device *dev = crtc->dev;
567 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
569 * For LVDS just rely on its current settings for dual-channel.
570 * We haven't figured out how to reliably set up different
571 * single/dual channel state, if we even can.
573 if (intel_is_dual_link_lvds(dev))
574 clock.p2 = limit->p2.p2_fast;
576 clock.p2 = limit->p2.p2_slow;
578 if (target < limit->p2.dot_limit)
579 clock.p2 = limit->p2.p2_slow;
581 clock.p2 = limit->p2.p2_fast;
584 memset(best_clock, 0, sizeof(*best_clock));
586 for (clock.m1 = limit->m1.min; clock.m1 <= limit->m1.max;
588 for (clock.m2 = limit->m2.min;
589 clock.m2 <= limit->m2.max; clock.m2++) {
590 for (clock.n = limit->n.min;
591 clock.n <= limit->n.max; clock.n++) {
592 for (clock.p1 = limit->p1.min;
593 clock.p1 <= limit->p1.max; clock.p1++) {
596 pineview_clock(refclk, &clock);
597 if (!intel_PLL_is_valid(dev, limit,
601 clock.p != match_clock->p)
604 this_err = abs(clock.dot - target);
605 if (this_err < err) {
614 return (err != target);
618 g4x_find_best_dpll(const intel_limit_t *limit, struct drm_crtc *crtc,
619 int target, int refclk, intel_clock_t *match_clock,
620 intel_clock_t *best_clock)
622 struct drm_device *dev = crtc->dev;
626 /* approximately equals target * 0.00585 */
627 int err_most = (target >> 8) + (target >> 9);
630 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
631 if (intel_is_dual_link_lvds(dev))
632 clock.p2 = limit->p2.p2_fast;
634 clock.p2 = limit->p2.p2_slow;
636 if (target < limit->p2.dot_limit)
637 clock.p2 = limit->p2.p2_slow;
639 clock.p2 = limit->p2.p2_fast;
642 memset(best_clock, 0, sizeof(*best_clock));
643 max_n = limit->n.max;
644 /* based on hardware requirement, prefer smaller n to precision */
645 for (clock.n = limit->n.min; clock.n <= max_n; clock.n++) {
646 /* based on hardware requirement, prefere larger m1,m2 */
647 for (clock.m1 = limit->m1.max;
648 clock.m1 >= limit->m1.min; clock.m1--) {
649 for (clock.m2 = limit->m2.max;
650 clock.m2 >= limit->m2.min; clock.m2--) {
651 for (clock.p1 = limit->p1.max;
652 clock.p1 >= limit->p1.min; clock.p1--) {
655 i9xx_clock(refclk, &clock);
656 if (!intel_PLL_is_valid(dev, limit,
660 this_err = abs(clock.dot - target);
661 if (this_err < err_most) {
675 vlv_find_best_dpll(const intel_limit_t *limit, struct drm_crtc *crtc,
676 int target, int refclk, intel_clock_t *match_clock,
677 intel_clock_t *best_clock)
679 struct drm_device *dev = crtc->dev;
681 unsigned int bestppm = 1000000;
682 /* min update 19.2 MHz */
683 int max_n = min(limit->n.max, refclk / 19200);
686 target *= 5; /* fast clock */
688 memset(best_clock, 0, sizeof(*best_clock));
690 /* based on hardware requirement, prefer smaller n to precision */
691 for (clock.n = limit->n.min; clock.n <= max_n; clock.n++) {
692 for (clock.p1 = limit->p1.max; clock.p1 >= limit->p1.min; clock.p1--) {
693 for (clock.p2 = limit->p2.p2_fast; clock.p2 >= limit->p2.p2_slow;
694 clock.p2 -= clock.p2 > 10 ? 2 : 1) {
695 clock.p = clock.p1 * clock.p2;
696 /* based on hardware requirement, prefer bigger m1,m2 values */
697 for (clock.m1 = limit->m1.min; clock.m1 <= limit->m1.max; clock.m1++) {
698 unsigned int ppm, diff;
700 clock.m2 = DIV_ROUND_CLOSEST(target * clock.p * clock.n,
703 vlv_clock(refclk, &clock);
705 if (!intel_PLL_is_valid(dev, limit,
709 diff = abs(clock.dot - target);
710 ppm = div_u64(1000000ULL * diff, target);
712 if (ppm < 100 && clock.p > best_clock->p) {
718 if (bestppm >= 10 && ppm < bestppm - 10) {
731 bool intel_crtc_active(struct drm_crtc *crtc)
733 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
735 /* Be paranoid as we can arrive here with only partial
736 * state retrieved from the hardware during setup.
738 * We can ditch the adjusted_mode.crtc_clock check as soon
739 * as Haswell has gained clock readout/fastboot support.
741 * We can ditch the crtc->fb check as soon as we can
742 * properly reconstruct framebuffers.
744 return intel_crtc->active && crtc->fb &&
745 intel_crtc->config.adjusted_mode.crtc_clock;
748 enum transcoder intel_pipe_to_cpu_transcoder(struct drm_i915_private *dev_priv,
751 struct drm_crtc *crtc = dev_priv->pipe_to_crtc_mapping[pipe];
752 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
754 return intel_crtc->config.cpu_transcoder;
757 static void g4x_wait_for_vblank(struct drm_device *dev, int pipe)
759 struct drm_i915_private *dev_priv = dev->dev_private;
760 u32 frame, frame_reg = PIPE_FRMCOUNT_GM45(pipe);
762 frame = I915_READ(frame_reg);
764 if (wait_for(I915_READ_NOTRACE(frame_reg) != frame, 50))
765 DRM_DEBUG_KMS("vblank wait timed out\n");
769 * intel_wait_for_vblank - wait for vblank on a given pipe
771 * @pipe: pipe to wait for
773 * Wait for vblank to occur on a given pipe. Needed for various bits of
776 void intel_wait_for_vblank(struct drm_device *dev, int pipe)
778 struct drm_i915_private *dev_priv = dev->dev_private;
779 int pipestat_reg = PIPESTAT(pipe);
781 if (IS_G4X(dev) || INTEL_INFO(dev)->gen >= 5) {
782 g4x_wait_for_vblank(dev, pipe);
786 /* Clear existing vblank status. Note this will clear any other
787 * sticky status fields as well.
789 * This races with i915_driver_irq_handler() with the result
790 * that either function could miss a vblank event. Here it is not
791 * fatal, as we will either wait upon the next vblank interrupt or
792 * timeout. Generally speaking intel_wait_for_vblank() is only
793 * called during modeset at which time the GPU should be idle and
794 * should *not* be performing page flips and thus not waiting on
796 * Currently, the result of us stealing a vblank from the irq
797 * handler is that a single frame will be skipped during swapbuffers.
799 I915_WRITE(pipestat_reg,
800 I915_READ(pipestat_reg) | PIPE_VBLANK_INTERRUPT_STATUS);
802 /* Wait for vblank interrupt bit to set */
803 if (wait_for(I915_READ(pipestat_reg) &
804 PIPE_VBLANK_INTERRUPT_STATUS,
806 DRM_DEBUG_KMS("vblank wait timed out\n");
809 static bool pipe_dsl_stopped(struct drm_device *dev, enum pipe pipe)
811 struct drm_i915_private *dev_priv = dev->dev_private;
812 u32 reg = PIPEDSL(pipe);
817 line_mask = DSL_LINEMASK_GEN2;
819 line_mask = DSL_LINEMASK_GEN3;
821 line1 = I915_READ(reg) & line_mask;
823 line2 = I915_READ(reg) & line_mask;
825 return line1 == line2;
829 * intel_wait_for_pipe_off - wait for pipe to turn off
831 * @pipe: pipe to wait for
833 * After disabling a pipe, we can't wait for vblank in the usual way,
834 * spinning on the vblank interrupt status bit, since we won't actually
835 * see an interrupt when the pipe is disabled.
838 * wait for the pipe register state bit to turn off
841 * wait for the display line value to settle (it usually
842 * ends up stopping at the start of the next frame).
845 void intel_wait_for_pipe_off(struct drm_device *dev, int pipe)
847 struct drm_i915_private *dev_priv = dev->dev_private;
848 enum transcoder cpu_transcoder = intel_pipe_to_cpu_transcoder(dev_priv,
851 if (INTEL_INFO(dev)->gen >= 4) {
852 int reg = PIPECONF(cpu_transcoder);
854 /* Wait for the Pipe State to go off */
855 if (wait_for((I915_READ(reg) & I965_PIPECONF_ACTIVE) == 0,
857 WARN(1, "pipe_off wait timed out\n");
859 /* Wait for the display line to settle */
860 if (wait_for(pipe_dsl_stopped(dev, pipe), 100))
861 WARN(1, "pipe_off wait timed out\n");
866 * ibx_digital_port_connected - is the specified port connected?
867 * @dev_priv: i915 private structure
868 * @port: the port to test
870 * Returns true if @port is connected, false otherwise.
872 bool ibx_digital_port_connected(struct drm_i915_private *dev_priv,
873 struct intel_digital_port *port)
877 if (HAS_PCH_IBX(dev_priv->dev)) {
880 bit = SDE_PORTB_HOTPLUG;
883 bit = SDE_PORTC_HOTPLUG;
886 bit = SDE_PORTD_HOTPLUG;
894 bit = SDE_PORTB_HOTPLUG_CPT;
897 bit = SDE_PORTC_HOTPLUG_CPT;
900 bit = SDE_PORTD_HOTPLUG_CPT;
907 return I915_READ(SDEISR) & bit;
910 static const char *state_string(bool enabled)
912 return enabled ? "on" : "off";
915 /* Only for pre-ILK configs */
916 void assert_pll(struct drm_i915_private *dev_priv,
917 enum pipe pipe, bool state)
924 val = I915_READ(reg);
925 cur_state = !!(val & DPLL_VCO_ENABLE);
926 WARN(cur_state != state,
927 "PLL state assertion failure (expected %s, current %s)\n",
928 state_string(state), state_string(cur_state));
931 /* XXX: the dsi pll is shared between MIPI DSI ports */
932 static void assert_dsi_pll(struct drm_i915_private *dev_priv, bool state)
937 mutex_lock(&dev_priv->dpio_lock);
938 val = vlv_cck_read(dev_priv, CCK_REG_DSI_PLL_CONTROL);
939 mutex_unlock(&dev_priv->dpio_lock);
941 cur_state = val & DSI_PLL_VCO_EN;
942 WARN(cur_state != state,
943 "DSI PLL state assertion failure (expected %s, current %s)\n",
944 state_string(state), state_string(cur_state));
946 #define assert_dsi_pll_enabled(d) assert_dsi_pll(d, true)
947 #define assert_dsi_pll_disabled(d) assert_dsi_pll(d, false)
949 struct intel_shared_dpll *
950 intel_crtc_to_shared_dpll(struct intel_crtc *crtc)
952 struct drm_i915_private *dev_priv = crtc->base.dev->dev_private;
954 if (crtc->config.shared_dpll < 0)
957 return &dev_priv->shared_dplls[crtc->config.shared_dpll];
961 void assert_shared_dpll(struct drm_i915_private *dev_priv,
962 struct intel_shared_dpll *pll,
966 struct intel_dpll_hw_state hw_state;
968 if (HAS_PCH_LPT(dev_priv->dev)) {
969 DRM_DEBUG_DRIVER("LPT detected: skipping PCH PLL test\n");
974 "asserting DPLL %s with no DPLL\n", state_string(state)))
977 cur_state = pll->get_hw_state(dev_priv, pll, &hw_state);
978 WARN(cur_state != state,
979 "%s assertion failure (expected %s, current %s)\n",
980 pll->name, state_string(state), state_string(cur_state));
983 static void assert_fdi_tx(struct drm_i915_private *dev_priv,
984 enum pipe pipe, bool state)
989 enum transcoder cpu_transcoder = intel_pipe_to_cpu_transcoder(dev_priv,
992 if (HAS_DDI(dev_priv->dev)) {
993 /* DDI does not have a specific FDI_TX register */
994 reg = TRANS_DDI_FUNC_CTL(cpu_transcoder);
995 val = I915_READ(reg);
996 cur_state = !!(val & TRANS_DDI_FUNC_ENABLE);
998 reg = FDI_TX_CTL(pipe);
999 val = I915_READ(reg);
1000 cur_state = !!(val & FDI_TX_ENABLE);
1002 WARN(cur_state != state,
1003 "FDI TX state assertion failure (expected %s, current %s)\n",
1004 state_string(state), state_string(cur_state));
1006 #define assert_fdi_tx_enabled(d, p) assert_fdi_tx(d, p, true)
1007 #define assert_fdi_tx_disabled(d, p) assert_fdi_tx(d, p, false)
1009 static void assert_fdi_rx(struct drm_i915_private *dev_priv,
1010 enum pipe pipe, bool state)
1016 reg = FDI_RX_CTL(pipe);
1017 val = I915_READ(reg);
1018 cur_state = !!(val & FDI_RX_ENABLE);
1019 WARN(cur_state != state,
1020 "FDI RX state assertion failure (expected %s, current %s)\n",
1021 state_string(state), state_string(cur_state));
1023 #define assert_fdi_rx_enabled(d, p) assert_fdi_rx(d, p, true)
1024 #define assert_fdi_rx_disabled(d, p) assert_fdi_rx(d, p, false)
1026 static void assert_fdi_tx_pll_enabled(struct drm_i915_private *dev_priv,
1032 /* ILK FDI PLL is always enabled */
1033 if (dev_priv->info->gen == 5)
1036 /* On Haswell, DDI ports are responsible for the FDI PLL setup */
1037 if (HAS_DDI(dev_priv->dev))
1040 reg = FDI_TX_CTL(pipe);
1041 val = I915_READ(reg);
1042 WARN(!(val & FDI_TX_PLL_ENABLE), "FDI TX PLL assertion failure, should be active but is disabled\n");
1045 void assert_fdi_rx_pll(struct drm_i915_private *dev_priv,
1046 enum pipe pipe, bool state)
1052 reg = FDI_RX_CTL(pipe);
1053 val = I915_READ(reg);
1054 cur_state = !!(val & FDI_RX_PLL_ENABLE);
1055 WARN(cur_state != state,
1056 "FDI RX PLL assertion failure (expected %s, current %s)\n",
1057 state_string(state), state_string(cur_state));
1060 static void assert_panel_unlocked(struct drm_i915_private *dev_priv,
1063 int pp_reg, lvds_reg;
1065 enum pipe panel_pipe = PIPE_A;
1068 if (HAS_PCH_SPLIT(dev_priv->dev)) {
1069 pp_reg = PCH_PP_CONTROL;
1070 lvds_reg = PCH_LVDS;
1072 pp_reg = PP_CONTROL;
1076 val = I915_READ(pp_reg);
1077 if (!(val & PANEL_POWER_ON) ||
1078 ((val & PANEL_UNLOCK_REGS) == PANEL_UNLOCK_REGS))
1081 if (I915_READ(lvds_reg) & LVDS_PIPEB_SELECT)
1082 panel_pipe = PIPE_B;
1084 WARN(panel_pipe == pipe && locked,
1085 "panel assertion failure, pipe %c regs locked\n",
1089 static void assert_cursor(struct drm_i915_private *dev_priv,
1090 enum pipe pipe, bool state)
1092 struct drm_device *dev = dev_priv->dev;
1095 if (IS_IVYBRIDGE(dev) || IS_HASWELL(dev))
1096 cur_state = I915_READ(CURCNTR_IVB(pipe)) & CURSOR_MODE;
1097 else if (IS_845G(dev) || IS_I865G(dev))
1098 cur_state = I915_READ(_CURACNTR) & CURSOR_ENABLE;
1100 cur_state = I915_READ(CURCNTR(pipe)) & CURSOR_MODE;
1102 WARN(cur_state != state,
1103 "cursor on pipe %c assertion failure (expected %s, current %s)\n",
1104 pipe_name(pipe), state_string(state), state_string(cur_state));
1106 #define assert_cursor_enabled(d, p) assert_cursor(d, p, true)
1107 #define assert_cursor_disabled(d, p) assert_cursor(d, p, false)
1109 void assert_pipe(struct drm_i915_private *dev_priv,
1110 enum pipe pipe, bool state)
1115 enum transcoder cpu_transcoder = intel_pipe_to_cpu_transcoder(dev_priv,
1118 /* if we need the pipe A quirk it must be always on */
1119 if (pipe == PIPE_A && dev_priv->quirks & QUIRK_PIPEA_FORCE)
1122 if (!intel_display_power_enabled(dev_priv->dev,
1123 POWER_DOMAIN_TRANSCODER(cpu_transcoder))) {
1126 reg = PIPECONF(cpu_transcoder);
1127 val = I915_READ(reg);
1128 cur_state = !!(val & PIPECONF_ENABLE);
1131 WARN(cur_state != state,
1132 "pipe %c assertion failure (expected %s, current %s)\n",
1133 pipe_name(pipe), state_string(state), state_string(cur_state));
1136 static void assert_plane(struct drm_i915_private *dev_priv,
1137 enum plane plane, bool state)
1143 reg = DSPCNTR(plane);
1144 val = I915_READ(reg);
1145 cur_state = !!(val & DISPLAY_PLANE_ENABLE);
1146 WARN(cur_state != state,
1147 "plane %c assertion failure (expected %s, current %s)\n",
1148 plane_name(plane), state_string(state), state_string(cur_state));
1151 #define assert_plane_enabled(d, p) assert_plane(d, p, true)
1152 #define assert_plane_disabled(d, p) assert_plane(d, p, false)
1154 static void assert_planes_disabled(struct drm_i915_private *dev_priv,
1157 struct drm_device *dev = dev_priv->dev;
1162 /* Primary planes are fixed to pipes on gen4+ */
1163 if (INTEL_INFO(dev)->gen >= 4) {
1164 reg = DSPCNTR(pipe);
1165 val = I915_READ(reg);
1166 WARN((val & DISPLAY_PLANE_ENABLE),
1167 "plane %c assertion failure, should be disabled but not\n",
1172 /* Need to check both planes against the pipe */
1175 val = I915_READ(reg);
1176 cur_pipe = (val & DISPPLANE_SEL_PIPE_MASK) >>
1177 DISPPLANE_SEL_PIPE_SHIFT;
1178 WARN((val & DISPLAY_PLANE_ENABLE) && pipe == cur_pipe,
1179 "plane %c assertion failure, should be off on pipe %c but is still active\n",
1180 plane_name(i), pipe_name(pipe));
1184 static void assert_sprites_disabled(struct drm_i915_private *dev_priv,
1187 struct drm_device *dev = dev_priv->dev;
1191 if (IS_VALLEYVIEW(dev)) {
1192 for (i = 0; i < dev_priv->num_plane; i++) {
1193 reg = SPCNTR(pipe, i);
1194 val = I915_READ(reg);
1195 WARN((val & SP_ENABLE),
1196 "sprite %c assertion failure, should be off on pipe %c but is still active\n",
1197 sprite_name(pipe, i), pipe_name(pipe));
1199 } else if (INTEL_INFO(dev)->gen >= 7) {
1201 val = I915_READ(reg);
1202 WARN((val & SPRITE_ENABLE),
1203 "sprite %c assertion failure, should be off on pipe %c but is still active\n",
1204 plane_name(pipe), pipe_name(pipe));
1205 } else if (INTEL_INFO(dev)->gen >= 5) {
1206 reg = DVSCNTR(pipe);
1207 val = I915_READ(reg);
1208 WARN((val & DVS_ENABLE),
1209 "sprite %c assertion failure, should be off on pipe %c but is still active\n",
1210 plane_name(pipe), pipe_name(pipe));
1214 static void ibx_assert_pch_refclk_enabled(struct drm_i915_private *dev_priv)
1219 WARN_ON(!(HAS_PCH_IBX(dev_priv->dev) || HAS_PCH_CPT(dev_priv->dev)));
1221 val = I915_READ(PCH_DREF_CONTROL);
1222 enabled = !!(val & (DREF_SSC_SOURCE_MASK | DREF_NONSPREAD_SOURCE_MASK |
1223 DREF_SUPERSPREAD_SOURCE_MASK));
1224 WARN(!enabled, "PCH refclk assertion failure, should be active but is disabled\n");
1227 static void assert_pch_transcoder_disabled(struct drm_i915_private *dev_priv,
1234 reg = PCH_TRANSCONF(pipe);
1235 val = I915_READ(reg);
1236 enabled = !!(val & TRANS_ENABLE);
1238 "transcoder assertion failed, should be off on pipe %c but is still active\n",
1242 static bool dp_pipe_enabled(struct drm_i915_private *dev_priv,
1243 enum pipe pipe, u32 port_sel, u32 val)
1245 if ((val & DP_PORT_EN) == 0)
1248 if (HAS_PCH_CPT(dev_priv->dev)) {
1249 u32 trans_dp_ctl_reg = TRANS_DP_CTL(pipe);
1250 u32 trans_dp_ctl = I915_READ(trans_dp_ctl_reg);
1251 if ((trans_dp_ctl & TRANS_DP_PORT_SEL_MASK) != port_sel)
1254 if ((val & DP_PIPE_MASK) != (pipe << 30))
1260 static bool hdmi_pipe_enabled(struct drm_i915_private *dev_priv,
1261 enum pipe pipe, u32 val)
1263 if ((val & SDVO_ENABLE) == 0)
1266 if (HAS_PCH_CPT(dev_priv->dev)) {
1267 if ((val & SDVO_PIPE_SEL_MASK_CPT) != SDVO_PIPE_SEL_CPT(pipe))
1270 if ((val & SDVO_PIPE_SEL_MASK) != SDVO_PIPE_SEL(pipe))
1276 static bool lvds_pipe_enabled(struct drm_i915_private *dev_priv,
1277 enum pipe pipe, u32 val)
1279 if ((val & LVDS_PORT_EN) == 0)
1282 if (HAS_PCH_CPT(dev_priv->dev)) {
1283 if ((val & PORT_TRANS_SEL_MASK) != PORT_TRANS_SEL_CPT(pipe))
1286 if ((val & LVDS_PIPE_MASK) != LVDS_PIPE(pipe))
1292 static bool adpa_pipe_enabled(struct drm_i915_private *dev_priv,
1293 enum pipe pipe, u32 val)
1295 if ((val & ADPA_DAC_ENABLE) == 0)
1297 if (HAS_PCH_CPT(dev_priv->dev)) {
1298 if ((val & PORT_TRANS_SEL_MASK) != PORT_TRANS_SEL_CPT(pipe))
1301 if ((val & ADPA_PIPE_SELECT_MASK) != ADPA_PIPE_SELECT(pipe))
1307 static void assert_pch_dp_disabled(struct drm_i915_private *dev_priv,
1308 enum pipe pipe, int reg, u32 port_sel)
1310 u32 val = I915_READ(reg);
1311 WARN(dp_pipe_enabled(dev_priv, pipe, port_sel, val),
1312 "PCH DP (0x%08x) enabled on transcoder %c, should be disabled\n",
1313 reg, pipe_name(pipe));
1315 WARN(HAS_PCH_IBX(dev_priv->dev) && (val & DP_PORT_EN) == 0
1316 && (val & DP_PIPEB_SELECT),
1317 "IBX PCH dp port still using transcoder B\n");
1320 static void assert_pch_hdmi_disabled(struct drm_i915_private *dev_priv,
1321 enum pipe pipe, int reg)
1323 u32 val = I915_READ(reg);
1324 WARN(hdmi_pipe_enabled(dev_priv, pipe, val),
1325 "PCH HDMI (0x%08x) enabled on transcoder %c, should be disabled\n",
1326 reg, pipe_name(pipe));
1328 WARN(HAS_PCH_IBX(dev_priv->dev) && (val & SDVO_ENABLE) == 0
1329 && (val & SDVO_PIPE_B_SELECT),
1330 "IBX PCH hdmi port still using transcoder B\n");
1333 static void assert_pch_ports_disabled(struct drm_i915_private *dev_priv,
1339 assert_pch_dp_disabled(dev_priv, pipe, PCH_DP_B, TRANS_DP_PORT_SEL_B);
1340 assert_pch_dp_disabled(dev_priv, pipe, PCH_DP_C, TRANS_DP_PORT_SEL_C);
1341 assert_pch_dp_disabled(dev_priv, pipe, PCH_DP_D, TRANS_DP_PORT_SEL_D);
1344 val = I915_READ(reg);
1345 WARN(adpa_pipe_enabled(dev_priv, pipe, val),
1346 "PCH VGA enabled on transcoder %c, should be disabled\n",
1350 val = I915_READ(reg);
1351 WARN(lvds_pipe_enabled(dev_priv, pipe, val),
1352 "PCH LVDS enabled on transcoder %c, should be disabled\n",
1355 assert_pch_hdmi_disabled(dev_priv, pipe, PCH_HDMIB);
1356 assert_pch_hdmi_disabled(dev_priv, pipe, PCH_HDMIC);
1357 assert_pch_hdmi_disabled(dev_priv, pipe, PCH_HDMID);
1360 static void intel_init_dpio(struct drm_device *dev)
1362 struct drm_i915_private *dev_priv = dev->dev_private;
1364 if (!IS_VALLEYVIEW(dev))
1367 DPIO_PHY_IOSF_PORT(DPIO_PHY0) = IOSF_PORT_DPIO;
1370 static void intel_reset_dpio(struct drm_device *dev)
1372 struct drm_i915_private *dev_priv = dev->dev_private;
1374 if (!IS_VALLEYVIEW(dev))
1378 * Enable the CRI clock source so we can get at the display and the
1379 * reference clock for VGA hotplug / manual detection.
1381 I915_WRITE(DPLL(PIPE_B), I915_READ(DPLL(PIPE_B)) |
1382 DPLL_REFA_CLK_ENABLE_VLV |
1383 DPLL_INTEGRATED_CRI_CLK_VLV);
1386 * From VLV2A0_DP_eDP_DPIO_driver_vbios_notes_10.docx -
1387 * 6. De-assert cmn_reset/side_reset. Same as VLV X0.
1388 * a. GUnit 0x2110 bit[0] set to 1 (def 0)
1389 * b. The other bits such as sfr settings / modesel may all be set
1392 * This should only be done on init and resume from S3 with both
1393 * PLLs disabled, or we risk losing DPIO and PLL synchronization.
1395 I915_WRITE(DPIO_CTL, I915_READ(DPIO_CTL) | DPIO_CMNRST);
1398 static void vlv_enable_pll(struct intel_crtc *crtc)
1400 struct drm_device *dev = crtc->base.dev;
1401 struct drm_i915_private *dev_priv = dev->dev_private;
1402 int reg = DPLL(crtc->pipe);
1403 u32 dpll = crtc->config.dpll_hw_state.dpll;
1405 assert_pipe_disabled(dev_priv, crtc->pipe);
1407 /* No really, not for ILK+ */
1408 BUG_ON(!IS_VALLEYVIEW(dev_priv->dev));
1410 /* PLL is protected by panel, make sure we can write it */
1411 if (IS_MOBILE(dev_priv->dev) && !IS_I830(dev_priv->dev))
1412 assert_panel_unlocked(dev_priv, crtc->pipe);
1414 I915_WRITE(reg, dpll);
1418 if (wait_for(((I915_READ(reg) & DPLL_LOCK_VLV) == DPLL_LOCK_VLV), 1))
1419 DRM_ERROR("DPLL %d failed to lock\n", crtc->pipe);
1421 I915_WRITE(DPLL_MD(crtc->pipe), crtc->config.dpll_hw_state.dpll_md);
1422 POSTING_READ(DPLL_MD(crtc->pipe));
1424 /* We do this three times for luck */
1425 I915_WRITE(reg, dpll);
1427 udelay(150); /* wait for warmup */
1428 I915_WRITE(reg, dpll);
1430 udelay(150); /* wait for warmup */
1431 I915_WRITE(reg, dpll);
1433 udelay(150); /* wait for warmup */
1436 static void i9xx_enable_pll(struct intel_crtc *crtc)
1438 struct drm_device *dev = crtc->base.dev;
1439 struct drm_i915_private *dev_priv = dev->dev_private;
1440 int reg = DPLL(crtc->pipe);
1441 u32 dpll = crtc->config.dpll_hw_state.dpll;
1443 assert_pipe_disabled(dev_priv, crtc->pipe);
1445 /* No really, not for ILK+ */
1446 BUG_ON(dev_priv->info->gen >= 5);
1448 /* PLL is protected by panel, make sure we can write it */
1449 if (IS_MOBILE(dev) && !IS_I830(dev))
1450 assert_panel_unlocked(dev_priv, crtc->pipe);
1452 I915_WRITE(reg, dpll);
1454 /* Wait for the clocks to stabilize. */
1458 if (INTEL_INFO(dev)->gen >= 4) {
1459 I915_WRITE(DPLL_MD(crtc->pipe),
1460 crtc->config.dpll_hw_state.dpll_md);
1462 /* The pixel multiplier can only be updated once the
1463 * DPLL is enabled and the clocks are stable.
1465 * So write it again.
1467 I915_WRITE(reg, dpll);
1470 /* We do this three times for luck */
1471 I915_WRITE(reg, dpll);
1473 udelay(150); /* wait for warmup */
1474 I915_WRITE(reg, dpll);
1476 udelay(150); /* wait for warmup */
1477 I915_WRITE(reg, dpll);
1479 udelay(150); /* wait for warmup */
1483 * i9xx_disable_pll - disable a PLL
1484 * @dev_priv: i915 private structure
1485 * @pipe: pipe PLL to disable
1487 * Disable the PLL for @pipe, making sure the pipe is off first.
1489 * Note! This is for pre-ILK only.
1491 static void i9xx_disable_pll(struct drm_i915_private *dev_priv, enum pipe pipe)
1493 /* Don't disable pipe A or pipe A PLLs if needed */
1494 if (pipe == PIPE_A && (dev_priv->quirks & QUIRK_PIPEA_FORCE))
1497 /* Make sure the pipe isn't still relying on us */
1498 assert_pipe_disabled(dev_priv, pipe);
1500 I915_WRITE(DPLL(pipe), 0);
1501 POSTING_READ(DPLL(pipe));
1504 static void vlv_disable_pll(struct drm_i915_private *dev_priv, enum pipe pipe)
1508 /* Make sure the pipe isn't still relying on us */
1509 assert_pipe_disabled(dev_priv, pipe);
1512 * Leave integrated clock source and reference clock enabled for pipe B.
1513 * The latter is needed for VGA hotplug / manual detection.
1516 val = DPLL_INTEGRATED_CRI_CLK_VLV | DPLL_REFA_CLK_ENABLE_VLV;
1517 I915_WRITE(DPLL(pipe), val);
1518 POSTING_READ(DPLL(pipe));
1521 void vlv_wait_port_ready(struct drm_i915_private *dev_priv,
1522 struct intel_digital_port *dport)
1526 switch (dport->port) {
1528 port_mask = DPLL_PORTB_READY_MASK;
1531 port_mask = DPLL_PORTC_READY_MASK;
1537 if (wait_for((I915_READ(DPLL(0)) & port_mask) == 0, 1000))
1538 WARN(1, "timed out waiting for port %c ready: 0x%08x\n",
1539 port_name(dport->port), I915_READ(DPLL(0)));
1543 * ironlake_enable_shared_dpll - enable PCH PLL
1544 * @dev_priv: i915 private structure
1545 * @pipe: pipe PLL to enable
1547 * The PCH PLL needs to be enabled before the PCH transcoder, since it
1548 * drives the transcoder clock.
1550 static void ironlake_enable_shared_dpll(struct intel_crtc *crtc)
1552 struct drm_i915_private *dev_priv = crtc->base.dev->dev_private;
1553 struct intel_shared_dpll *pll = intel_crtc_to_shared_dpll(crtc);
1555 /* PCH PLLs only available on ILK, SNB and IVB */
1556 BUG_ON(dev_priv->info->gen < 5);
1557 if (WARN_ON(pll == NULL))
1560 if (WARN_ON(pll->refcount == 0))
1563 DRM_DEBUG_KMS("enable %s (active %d, on? %d)for crtc %d\n",
1564 pll->name, pll->active, pll->on,
1565 crtc->base.base.id);
1567 if (pll->active++) {
1569 assert_shared_dpll_enabled(dev_priv, pll);
1574 DRM_DEBUG_KMS("enabling %s\n", pll->name);
1575 pll->enable(dev_priv, pll);
1579 static void intel_disable_shared_dpll(struct intel_crtc *crtc)
1581 struct drm_i915_private *dev_priv = crtc->base.dev->dev_private;
1582 struct intel_shared_dpll *pll = intel_crtc_to_shared_dpll(crtc);
1584 /* PCH only available on ILK+ */
1585 BUG_ON(dev_priv->info->gen < 5);
1586 if (WARN_ON(pll == NULL))
1589 if (WARN_ON(pll->refcount == 0))
1592 DRM_DEBUG_KMS("disable %s (active %d, on? %d) for crtc %d\n",
1593 pll->name, pll->active, pll->on,
1594 crtc->base.base.id);
1596 if (WARN_ON(pll->active == 0)) {
1597 assert_shared_dpll_disabled(dev_priv, pll);
1601 assert_shared_dpll_enabled(dev_priv, pll);
1606 DRM_DEBUG_KMS("disabling %s\n", pll->name);
1607 pll->disable(dev_priv, pll);
1611 static void ironlake_enable_pch_transcoder(struct drm_i915_private *dev_priv,
1614 struct drm_device *dev = dev_priv->dev;
1615 struct drm_crtc *crtc = dev_priv->pipe_to_crtc_mapping[pipe];
1616 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
1617 uint32_t reg, val, pipeconf_val;
1619 /* PCH only available on ILK+ */
1620 BUG_ON(dev_priv->info->gen < 5);
1622 /* Make sure PCH DPLL is enabled */
1623 assert_shared_dpll_enabled(dev_priv,
1624 intel_crtc_to_shared_dpll(intel_crtc));
1626 /* FDI must be feeding us bits for PCH ports */
1627 assert_fdi_tx_enabled(dev_priv, pipe);
1628 assert_fdi_rx_enabled(dev_priv, pipe);
1630 if (HAS_PCH_CPT(dev)) {
1631 /* Workaround: Set the timing override bit before enabling the
1632 * pch transcoder. */
1633 reg = TRANS_CHICKEN2(pipe);
1634 val = I915_READ(reg);
1635 val |= TRANS_CHICKEN2_TIMING_OVERRIDE;
1636 I915_WRITE(reg, val);
1639 reg = PCH_TRANSCONF(pipe);
1640 val = I915_READ(reg);
1641 pipeconf_val = I915_READ(PIPECONF(pipe));
1643 if (HAS_PCH_IBX(dev_priv->dev)) {
1645 * make the BPC in transcoder be consistent with
1646 * that in pipeconf reg.
1648 val &= ~PIPECONF_BPC_MASK;
1649 val |= pipeconf_val & PIPECONF_BPC_MASK;
1652 val &= ~TRANS_INTERLACE_MASK;
1653 if ((pipeconf_val & PIPECONF_INTERLACE_MASK) == PIPECONF_INTERLACED_ILK)
1654 if (HAS_PCH_IBX(dev_priv->dev) &&
1655 intel_pipe_has_type(crtc, INTEL_OUTPUT_SDVO))
1656 val |= TRANS_LEGACY_INTERLACED_ILK;
1658 val |= TRANS_INTERLACED;
1660 val |= TRANS_PROGRESSIVE;
1662 I915_WRITE(reg, val | TRANS_ENABLE);
1663 if (wait_for(I915_READ(reg) & TRANS_STATE_ENABLE, 100))
1664 DRM_ERROR("failed to enable transcoder %c\n", pipe_name(pipe));
1667 static void lpt_enable_pch_transcoder(struct drm_i915_private *dev_priv,
1668 enum transcoder cpu_transcoder)
1670 u32 val, pipeconf_val;
1672 /* PCH only available on ILK+ */
1673 BUG_ON(dev_priv->info->gen < 5);
1675 /* FDI must be feeding us bits for PCH ports */
1676 assert_fdi_tx_enabled(dev_priv, (enum pipe) cpu_transcoder);
1677 assert_fdi_rx_enabled(dev_priv, TRANSCODER_A);
1679 /* Workaround: set timing override bit. */
1680 val = I915_READ(_TRANSA_CHICKEN2);
1681 val |= TRANS_CHICKEN2_TIMING_OVERRIDE;
1682 I915_WRITE(_TRANSA_CHICKEN2, val);
1685 pipeconf_val = I915_READ(PIPECONF(cpu_transcoder));
1687 if ((pipeconf_val & PIPECONF_INTERLACE_MASK_HSW) ==
1688 PIPECONF_INTERLACED_ILK)
1689 val |= TRANS_INTERLACED;
1691 val |= TRANS_PROGRESSIVE;
1693 I915_WRITE(LPT_TRANSCONF, val);
1694 if (wait_for(I915_READ(LPT_TRANSCONF) & TRANS_STATE_ENABLE, 100))
1695 DRM_ERROR("Failed to enable PCH transcoder\n");
1698 static void ironlake_disable_pch_transcoder(struct drm_i915_private *dev_priv,
1701 struct drm_device *dev = dev_priv->dev;
1704 /* FDI relies on the transcoder */
1705 assert_fdi_tx_disabled(dev_priv, pipe);
1706 assert_fdi_rx_disabled(dev_priv, pipe);
1708 /* Ports must be off as well */
1709 assert_pch_ports_disabled(dev_priv, pipe);
1711 reg = PCH_TRANSCONF(pipe);
1712 val = I915_READ(reg);
1713 val &= ~TRANS_ENABLE;
1714 I915_WRITE(reg, val);
1715 /* wait for PCH transcoder off, transcoder state */
1716 if (wait_for((I915_READ(reg) & TRANS_STATE_ENABLE) == 0, 50))
1717 DRM_ERROR("failed to disable transcoder %c\n", pipe_name(pipe));
1719 if (!HAS_PCH_IBX(dev)) {
1720 /* Workaround: Clear the timing override chicken bit again. */
1721 reg = TRANS_CHICKEN2(pipe);
1722 val = I915_READ(reg);
1723 val &= ~TRANS_CHICKEN2_TIMING_OVERRIDE;
1724 I915_WRITE(reg, val);
1728 static void lpt_disable_pch_transcoder(struct drm_i915_private *dev_priv)
1732 val = I915_READ(LPT_TRANSCONF);
1733 val &= ~TRANS_ENABLE;
1734 I915_WRITE(LPT_TRANSCONF, val);
1735 /* wait for PCH transcoder off, transcoder state */
1736 if (wait_for((I915_READ(LPT_TRANSCONF) & TRANS_STATE_ENABLE) == 0, 50))
1737 DRM_ERROR("Failed to disable PCH transcoder\n");
1739 /* Workaround: clear timing override bit. */
1740 val = I915_READ(_TRANSA_CHICKEN2);
1741 val &= ~TRANS_CHICKEN2_TIMING_OVERRIDE;
1742 I915_WRITE(_TRANSA_CHICKEN2, val);
1746 * intel_enable_pipe - enable a pipe, asserting requirements
1747 * @dev_priv: i915 private structure
1748 * @pipe: pipe to enable
1749 * @pch_port: on ILK+, is this pipe driving a PCH port or not
1751 * Enable @pipe, making sure that various hardware specific requirements
1752 * are met, if applicable, e.g. PLL enabled, LVDS pairs enabled, etc.
1754 * @pipe should be %PIPE_A or %PIPE_B.
1756 * Will wait until the pipe is actually running (i.e. first vblank) before
1759 static void intel_enable_pipe(struct drm_i915_private *dev_priv, enum pipe pipe,
1760 bool pch_port, bool dsi)
1762 enum transcoder cpu_transcoder = intel_pipe_to_cpu_transcoder(dev_priv,
1764 enum pipe pch_transcoder;
1768 assert_planes_disabled(dev_priv, pipe);
1769 assert_cursor_disabled(dev_priv, pipe);
1770 assert_sprites_disabled(dev_priv, pipe);
1772 if (HAS_PCH_LPT(dev_priv->dev))
1773 pch_transcoder = TRANSCODER_A;
1775 pch_transcoder = pipe;
1778 * A pipe without a PLL won't actually be able to drive bits from
1779 * a plane. On ILK+ the pipe PLLs are integrated, so we don't
1782 if (!HAS_PCH_SPLIT(dev_priv->dev))
1784 assert_dsi_pll_enabled(dev_priv);
1786 assert_pll_enabled(dev_priv, pipe);
1789 /* if driving the PCH, we need FDI enabled */
1790 assert_fdi_rx_pll_enabled(dev_priv, pch_transcoder);
1791 assert_fdi_tx_pll_enabled(dev_priv,
1792 (enum pipe) cpu_transcoder);
1794 /* FIXME: assert CPU port conditions for SNB+ */
1797 reg = PIPECONF(cpu_transcoder);
1798 val = I915_READ(reg);
1799 if (val & PIPECONF_ENABLE)
1802 I915_WRITE(reg, val | PIPECONF_ENABLE);
1803 intel_wait_for_vblank(dev_priv->dev, pipe);
1807 * intel_disable_pipe - disable a pipe, asserting requirements
1808 * @dev_priv: i915 private structure
1809 * @pipe: pipe to disable
1811 * Disable @pipe, making sure that various hardware specific requirements
1812 * are met, if applicable, e.g. plane disabled, panel fitter off, etc.
1814 * @pipe should be %PIPE_A or %PIPE_B.
1816 * Will wait until the pipe has shut down before returning.
1818 static void intel_disable_pipe(struct drm_i915_private *dev_priv,
1821 enum transcoder cpu_transcoder = intel_pipe_to_cpu_transcoder(dev_priv,
1827 * Make sure planes won't keep trying to pump pixels to us,
1828 * or we might hang the display.
1830 assert_planes_disabled(dev_priv, pipe);
1831 assert_cursor_disabled(dev_priv, pipe);
1832 assert_sprites_disabled(dev_priv, pipe);
1834 /* Don't disable pipe A or pipe A PLLs if needed */
1835 if (pipe == PIPE_A && (dev_priv->quirks & QUIRK_PIPEA_FORCE))
1838 reg = PIPECONF(cpu_transcoder);
1839 val = I915_READ(reg);
1840 if ((val & PIPECONF_ENABLE) == 0)
1843 I915_WRITE(reg, val & ~PIPECONF_ENABLE);
1844 intel_wait_for_pipe_off(dev_priv->dev, pipe);
1848 * Plane regs are double buffered, going from enabled->disabled needs a
1849 * trigger in order to latch. The display address reg provides this.
1851 void intel_flush_primary_plane(struct drm_i915_private *dev_priv,
1854 u32 reg = dev_priv->info->gen >= 4 ? DSPSURF(plane) : DSPADDR(plane);
1856 I915_WRITE(reg, I915_READ(reg));
1861 * intel_enable_primary_plane - enable the primary plane on a given pipe
1862 * @dev_priv: i915 private structure
1863 * @plane: plane to enable
1864 * @pipe: pipe being fed
1866 * Enable @plane on @pipe, making sure that @pipe is running first.
1868 static void intel_enable_primary_plane(struct drm_i915_private *dev_priv,
1869 enum plane plane, enum pipe pipe)
1871 struct intel_crtc *intel_crtc =
1872 to_intel_crtc(dev_priv->pipe_to_crtc_mapping[pipe]);
1876 /* If the pipe isn't enabled, we can't pump pixels and may hang */
1877 assert_pipe_enabled(dev_priv, pipe);
1879 WARN(intel_crtc->primary_enabled, "Primary plane already enabled\n");
1881 intel_crtc->primary_enabled = true;
1883 reg = DSPCNTR(plane);
1884 val = I915_READ(reg);
1885 if (val & DISPLAY_PLANE_ENABLE)
1888 I915_WRITE(reg, val | DISPLAY_PLANE_ENABLE);
1889 intel_flush_primary_plane(dev_priv, plane);
1890 intel_wait_for_vblank(dev_priv->dev, pipe);
1894 * intel_disable_primary_plane - disable the primary plane
1895 * @dev_priv: i915 private structure
1896 * @plane: plane to disable
1897 * @pipe: pipe consuming the data
1899 * Disable @plane; should be an independent operation.
1901 static void intel_disable_primary_plane(struct drm_i915_private *dev_priv,
1902 enum plane plane, enum pipe pipe)
1904 struct intel_crtc *intel_crtc =
1905 to_intel_crtc(dev_priv->pipe_to_crtc_mapping[pipe]);
1909 WARN(!intel_crtc->primary_enabled, "Primary plane already disabled\n");
1911 intel_crtc->primary_enabled = false;
1913 reg = DSPCNTR(plane);
1914 val = I915_READ(reg);
1915 if ((val & DISPLAY_PLANE_ENABLE) == 0)
1918 I915_WRITE(reg, val & ~DISPLAY_PLANE_ENABLE);
1919 intel_flush_primary_plane(dev_priv, plane);
1920 intel_wait_for_vblank(dev_priv->dev, pipe);
1923 static bool need_vtd_wa(struct drm_device *dev)
1925 #ifdef CONFIG_INTEL_IOMMU
1926 if (INTEL_INFO(dev)->gen >= 6 && intel_iommu_gfx_mapped)
1933 intel_pin_and_fence_fb_obj(struct drm_device *dev,
1934 struct drm_i915_gem_object *obj,
1935 struct intel_ring_buffer *pipelined)
1937 struct drm_i915_private *dev_priv = dev->dev_private;
1941 switch (obj->tiling_mode) {
1942 case I915_TILING_NONE:
1943 if (IS_BROADWATER(dev) || IS_CRESTLINE(dev))
1944 alignment = 128 * 1024;
1945 else if (INTEL_INFO(dev)->gen >= 4)
1946 alignment = 4 * 1024;
1948 alignment = 64 * 1024;
1951 /* pin() will align the object as required by fence */
1955 WARN(1, "Y tiled bo slipped through, driver bug!\n");
1961 /* Note that the w/a also requires 64 PTE of padding following the
1962 * bo. We currently fill all unused PTE with the shadow page and so
1963 * we should always have valid PTE following the scanout preventing
1966 if (need_vtd_wa(dev) && alignment < 256 * 1024)
1967 alignment = 256 * 1024;
1969 dev_priv->mm.interruptible = false;
1970 ret = i915_gem_object_pin_to_display_plane(obj, alignment, pipelined);
1972 goto err_interruptible;
1974 /* Install a fence for tiled scan-out. Pre-i965 always needs a
1975 * fence, whereas 965+ only requires a fence if using
1976 * framebuffer compression. For simplicity, we always install
1977 * a fence as the cost is not that onerous.
1979 ret = i915_gem_object_get_fence(obj);
1983 i915_gem_object_pin_fence(obj);
1985 dev_priv->mm.interruptible = true;
1989 i915_gem_object_unpin_from_display_plane(obj);
1991 dev_priv->mm.interruptible = true;
1995 void intel_unpin_fb_obj(struct drm_i915_gem_object *obj)
1997 i915_gem_object_unpin_fence(obj);
1998 i915_gem_object_unpin_from_display_plane(obj);
2001 /* Computes the linear offset to the base tile and adjusts x, y. bytes per pixel
2002 * is assumed to be a power-of-two. */
2003 unsigned long intel_gen4_compute_page_offset(int *x, int *y,
2004 unsigned int tiling_mode,
2008 if (tiling_mode != I915_TILING_NONE) {
2009 unsigned int tile_rows, tiles;
2014 tiles = *x / (512/cpp);
2017 return tile_rows * pitch * 8 + tiles * 4096;
2019 unsigned int offset;
2021 offset = *y * pitch + *x * cpp;
2023 *x = (offset & 4095) / cpp;
2024 return offset & -4096;
2028 static int i9xx_update_plane(struct drm_crtc *crtc, struct drm_framebuffer *fb,
2031 struct drm_device *dev = crtc->dev;
2032 struct drm_i915_private *dev_priv = dev->dev_private;
2033 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
2034 struct intel_framebuffer *intel_fb;
2035 struct drm_i915_gem_object *obj;
2036 int plane = intel_crtc->plane;
2037 unsigned long linear_offset;
2046 DRM_ERROR("Can't update plane %c in SAREA\n", plane_name(plane));
2050 intel_fb = to_intel_framebuffer(fb);
2051 obj = intel_fb->obj;
2053 reg = DSPCNTR(plane);
2054 dspcntr = I915_READ(reg);
2055 /* Mask out pixel format bits in case we change it */
2056 dspcntr &= ~DISPPLANE_PIXFORMAT_MASK;
2057 switch (fb->pixel_format) {
2059 dspcntr |= DISPPLANE_8BPP;
2061 case DRM_FORMAT_XRGB1555:
2062 case DRM_FORMAT_ARGB1555:
2063 dspcntr |= DISPPLANE_BGRX555;
2065 case DRM_FORMAT_RGB565:
2066 dspcntr |= DISPPLANE_BGRX565;
2068 case DRM_FORMAT_XRGB8888:
2069 case DRM_FORMAT_ARGB8888:
2070 dspcntr |= DISPPLANE_BGRX888;
2072 case DRM_FORMAT_XBGR8888:
2073 case DRM_FORMAT_ABGR8888:
2074 dspcntr |= DISPPLANE_RGBX888;
2076 case DRM_FORMAT_XRGB2101010:
2077 case DRM_FORMAT_ARGB2101010:
2078 dspcntr |= DISPPLANE_BGRX101010;
2080 case DRM_FORMAT_XBGR2101010:
2081 case DRM_FORMAT_ABGR2101010:
2082 dspcntr |= DISPPLANE_RGBX101010;
2088 if (INTEL_INFO(dev)->gen >= 4) {
2089 if (obj->tiling_mode != I915_TILING_NONE)
2090 dspcntr |= DISPPLANE_TILED;
2092 dspcntr &= ~DISPPLANE_TILED;
2096 dspcntr |= DISPPLANE_TRICKLE_FEED_DISABLE;
2098 I915_WRITE(reg, dspcntr);
2100 linear_offset = y * fb->pitches[0] + x * (fb->bits_per_pixel / 8);
2102 if (INTEL_INFO(dev)->gen >= 4) {
2103 intel_crtc->dspaddr_offset =
2104 intel_gen4_compute_page_offset(&x, &y, obj->tiling_mode,
2105 fb->bits_per_pixel / 8,
2107 linear_offset -= intel_crtc->dspaddr_offset;
2109 intel_crtc->dspaddr_offset = linear_offset;
2112 DRM_DEBUG_KMS("Writing base %08lX %08lX %d %d %d\n",
2113 i915_gem_obj_ggtt_offset(obj), linear_offset, x, y,
2115 I915_WRITE(DSPSTRIDE(plane), fb->pitches[0]);
2116 if (INTEL_INFO(dev)->gen >= 4) {
2117 I915_WRITE(DSPSURF(plane),
2118 i915_gem_obj_ggtt_offset(obj) + intel_crtc->dspaddr_offset);
2119 I915_WRITE(DSPTILEOFF(plane), (y << 16) | x);
2120 I915_WRITE(DSPLINOFF(plane), linear_offset);
2122 I915_WRITE(DSPADDR(plane), i915_gem_obj_ggtt_offset(obj) + linear_offset);
2128 static int ironlake_update_plane(struct drm_crtc *crtc,
2129 struct drm_framebuffer *fb, int x, int y)
2131 struct drm_device *dev = crtc->dev;
2132 struct drm_i915_private *dev_priv = dev->dev_private;
2133 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
2134 struct intel_framebuffer *intel_fb;
2135 struct drm_i915_gem_object *obj;
2136 int plane = intel_crtc->plane;
2137 unsigned long linear_offset;
2147 DRM_ERROR("Can't update plane %c in SAREA\n", plane_name(plane));
2151 intel_fb = to_intel_framebuffer(fb);
2152 obj = intel_fb->obj;
2154 reg = DSPCNTR(plane);
2155 dspcntr = I915_READ(reg);
2156 /* Mask out pixel format bits in case we change it */
2157 dspcntr &= ~DISPPLANE_PIXFORMAT_MASK;
2158 switch (fb->pixel_format) {
2160 dspcntr |= DISPPLANE_8BPP;
2162 case DRM_FORMAT_RGB565:
2163 dspcntr |= DISPPLANE_BGRX565;
2165 case DRM_FORMAT_XRGB8888:
2166 case DRM_FORMAT_ARGB8888:
2167 dspcntr |= DISPPLANE_BGRX888;
2169 case DRM_FORMAT_XBGR8888:
2170 case DRM_FORMAT_ABGR8888:
2171 dspcntr |= DISPPLANE_RGBX888;
2173 case DRM_FORMAT_XRGB2101010:
2174 case DRM_FORMAT_ARGB2101010:
2175 dspcntr |= DISPPLANE_BGRX101010;
2177 case DRM_FORMAT_XBGR2101010:
2178 case DRM_FORMAT_ABGR2101010:
2179 dspcntr |= DISPPLANE_RGBX101010;
2185 if (obj->tiling_mode != I915_TILING_NONE)
2186 dspcntr |= DISPPLANE_TILED;
2188 dspcntr &= ~DISPPLANE_TILED;
2190 if (IS_HASWELL(dev) || IS_BROADWELL(dev))
2191 dspcntr &= ~DISPPLANE_TRICKLE_FEED_DISABLE;
2193 dspcntr |= DISPPLANE_TRICKLE_FEED_DISABLE;
2195 I915_WRITE(reg, dspcntr);
2197 linear_offset = y * fb->pitches[0] + x * (fb->bits_per_pixel / 8);
2198 intel_crtc->dspaddr_offset =
2199 intel_gen4_compute_page_offset(&x, &y, obj->tiling_mode,
2200 fb->bits_per_pixel / 8,
2202 linear_offset -= intel_crtc->dspaddr_offset;
2204 DRM_DEBUG_KMS("Writing base %08lX %08lX %d %d %d\n",
2205 i915_gem_obj_ggtt_offset(obj), linear_offset, x, y,
2207 I915_WRITE(DSPSTRIDE(plane), fb->pitches[0]);
2208 I915_WRITE(DSPSURF(plane),
2209 i915_gem_obj_ggtt_offset(obj) + intel_crtc->dspaddr_offset);
2210 if (IS_HASWELL(dev) || IS_BROADWELL(dev)) {
2211 I915_WRITE(DSPOFFSET(plane), (y << 16) | x);
2213 I915_WRITE(DSPTILEOFF(plane), (y << 16) | x);
2214 I915_WRITE(DSPLINOFF(plane), linear_offset);
2221 /* Assume fb object is pinned & idle & fenced and just update base pointers */
2223 intel_pipe_set_base_atomic(struct drm_crtc *crtc, struct drm_framebuffer *fb,
2224 int x, int y, enum mode_set_atomic state)
2226 struct drm_device *dev = crtc->dev;
2227 struct drm_i915_private *dev_priv = dev->dev_private;
2229 if (dev_priv->display.disable_fbc)
2230 dev_priv->display.disable_fbc(dev);
2231 intel_increase_pllclock(crtc);
2233 return dev_priv->display.update_plane(crtc, fb, x, y);
2236 void intel_display_handle_reset(struct drm_device *dev)
2238 struct drm_i915_private *dev_priv = dev->dev_private;
2239 struct drm_crtc *crtc;
2242 * Flips in the rings have been nuked by the reset,
2243 * so complete all pending flips so that user space
2244 * will get its events and not get stuck.
2246 * Also update the base address of all primary
2247 * planes to the the last fb to make sure we're
2248 * showing the correct fb after a reset.
2250 * Need to make two loops over the crtcs so that we
2251 * don't try to grab a crtc mutex before the
2252 * pending_flip_queue really got woken up.
2255 list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
2256 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
2257 enum plane plane = intel_crtc->plane;
2259 intel_prepare_page_flip(dev, plane);
2260 intel_finish_page_flip_plane(dev, plane);
2263 list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
2264 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
2266 mutex_lock(&crtc->mutex);
2268 * FIXME: Once we have proper support for primary planes (and
2269 * disabling them without disabling the entire crtc) allow again
2272 if (intel_crtc->active && crtc->fb)
2273 dev_priv->display.update_plane(crtc, crtc->fb,
2275 mutex_unlock(&crtc->mutex);
2280 intel_finish_fb(struct drm_framebuffer *old_fb)
2282 struct drm_i915_gem_object *obj = to_intel_framebuffer(old_fb)->obj;
2283 struct drm_i915_private *dev_priv = obj->base.dev->dev_private;
2284 bool was_interruptible = dev_priv->mm.interruptible;
2287 /* Big Hammer, we also need to ensure that any pending
2288 * MI_WAIT_FOR_EVENT inside a user batch buffer on the
2289 * current scanout is retired before unpinning the old
2292 * This should only fail upon a hung GPU, in which case we
2293 * can safely continue.
2295 dev_priv->mm.interruptible = false;
2296 ret = i915_gem_object_finish_gpu(obj);
2297 dev_priv->mm.interruptible = was_interruptible;
2302 static void intel_crtc_update_sarea_pos(struct drm_crtc *crtc, int x, int y)
2304 struct drm_device *dev = crtc->dev;
2305 struct drm_i915_master_private *master_priv;
2306 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
2308 if (!dev->primary->master)
2311 master_priv = dev->primary->master->driver_priv;
2312 if (!master_priv->sarea_priv)
2315 switch (intel_crtc->pipe) {
2317 master_priv->sarea_priv->pipeA_x = x;
2318 master_priv->sarea_priv->pipeA_y = y;
2321 master_priv->sarea_priv->pipeB_x = x;
2322 master_priv->sarea_priv->pipeB_y = y;
2330 intel_pipe_set_base(struct drm_crtc *crtc, int x, int y,
2331 struct drm_framebuffer *fb)
2333 struct drm_device *dev = crtc->dev;
2334 struct drm_i915_private *dev_priv = dev->dev_private;
2335 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
2336 struct drm_framebuffer *old_fb;
2341 DRM_ERROR("No FB bound\n");
2345 if (intel_crtc->plane > INTEL_INFO(dev)->num_pipes) {
2346 DRM_ERROR("no plane for crtc: plane %c, num_pipes %d\n",
2347 plane_name(intel_crtc->plane),
2348 INTEL_INFO(dev)->num_pipes);
2352 mutex_lock(&dev->struct_mutex);
2353 ret = intel_pin_and_fence_fb_obj(dev,
2354 to_intel_framebuffer(fb)->obj,
2357 mutex_unlock(&dev->struct_mutex);
2358 DRM_ERROR("pin & fence failed\n");
2363 * Update pipe size and adjust fitter if needed: the reason for this is
2364 * that in compute_mode_changes we check the native mode (not the pfit
2365 * mode) to see if we can flip rather than do a full mode set. In the
2366 * fastboot case, we'll flip, but if we don't update the pipesrc and
2367 * pfit state, we'll end up with a big fb scanned out into the wrong
2370 * To fix this properly, we need to hoist the checks up into
2371 * compute_mode_changes (or above), check the actual pfit state and
2372 * whether the platform allows pfit disable with pipe active, and only
2373 * then update the pipesrc and pfit state, even on the flip path.
2375 if (i915.fastboot) {
2376 const struct drm_display_mode *adjusted_mode =
2377 &intel_crtc->config.adjusted_mode;
2379 I915_WRITE(PIPESRC(intel_crtc->pipe),
2380 ((adjusted_mode->crtc_hdisplay - 1) << 16) |
2381 (adjusted_mode->crtc_vdisplay - 1));
2382 if (!intel_crtc->config.pch_pfit.enabled &&
2383 (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) ||
2384 intel_pipe_has_type(crtc, INTEL_OUTPUT_EDP))) {
2385 I915_WRITE(PF_CTL(intel_crtc->pipe), 0);
2386 I915_WRITE(PF_WIN_POS(intel_crtc->pipe), 0);
2387 I915_WRITE(PF_WIN_SZ(intel_crtc->pipe), 0);
2389 intel_crtc->config.pipe_src_w = adjusted_mode->crtc_hdisplay;
2390 intel_crtc->config.pipe_src_h = adjusted_mode->crtc_vdisplay;
2393 ret = dev_priv->display.update_plane(crtc, fb, x, y);
2395 intel_unpin_fb_obj(to_intel_framebuffer(fb)->obj);
2396 mutex_unlock(&dev->struct_mutex);
2397 DRM_ERROR("failed to update base address\n");
2407 if (intel_crtc->active && old_fb != fb)
2408 intel_wait_for_vblank(dev, intel_crtc->pipe);
2409 intel_unpin_fb_obj(to_intel_framebuffer(old_fb)->obj);
2412 intel_update_fbc(dev);
2413 intel_edp_psr_update(dev);
2414 mutex_unlock(&dev->struct_mutex);
2416 intel_crtc_update_sarea_pos(crtc, x, y);
2421 static void intel_fdi_normal_train(struct drm_crtc *crtc)
2423 struct drm_device *dev = crtc->dev;
2424 struct drm_i915_private *dev_priv = dev->dev_private;
2425 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
2426 int pipe = intel_crtc->pipe;
2429 /* enable normal train */
2430 reg = FDI_TX_CTL(pipe);
2431 temp = I915_READ(reg);
2432 if (IS_IVYBRIDGE(dev)) {
2433 temp &= ~FDI_LINK_TRAIN_NONE_IVB;
2434 temp |= FDI_LINK_TRAIN_NONE_IVB | FDI_TX_ENHANCE_FRAME_ENABLE;
2436 temp &= ~FDI_LINK_TRAIN_NONE;
2437 temp |= FDI_LINK_TRAIN_NONE | FDI_TX_ENHANCE_FRAME_ENABLE;
2439 I915_WRITE(reg, temp);
2441 reg = FDI_RX_CTL(pipe);
2442 temp = I915_READ(reg);
2443 if (HAS_PCH_CPT(dev)) {
2444 temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
2445 temp |= FDI_LINK_TRAIN_NORMAL_CPT;
2447 temp &= ~FDI_LINK_TRAIN_NONE;
2448 temp |= FDI_LINK_TRAIN_NONE;
2450 I915_WRITE(reg, temp | FDI_RX_ENHANCE_FRAME_ENABLE);
2452 /* wait one idle pattern time */
2456 /* IVB wants error correction enabled */
2457 if (IS_IVYBRIDGE(dev))
2458 I915_WRITE(reg, I915_READ(reg) | FDI_FS_ERRC_ENABLE |
2459 FDI_FE_ERRC_ENABLE);
2462 static bool pipe_has_enabled_pch(struct intel_crtc *crtc)
2464 return crtc->base.enabled && crtc->active &&
2465 crtc->config.has_pch_encoder;
2468 static void ivb_modeset_global_resources(struct drm_device *dev)
2470 struct drm_i915_private *dev_priv = dev->dev_private;
2471 struct intel_crtc *pipe_B_crtc =
2472 to_intel_crtc(dev_priv->pipe_to_crtc_mapping[PIPE_B]);
2473 struct intel_crtc *pipe_C_crtc =
2474 to_intel_crtc(dev_priv->pipe_to_crtc_mapping[PIPE_C]);
2478 * When everything is off disable fdi C so that we could enable fdi B
2479 * with all lanes. Note that we don't care about enabled pipes without
2480 * an enabled pch encoder.
2482 if (!pipe_has_enabled_pch(pipe_B_crtc) &&
2483 !pipe_has_enabled_pch(pipe_C_crtc)) {
2484 WARN_ON(I915_READ(FDI_RX_CTL(PIPE_B)) & FDI_RX_ENABLE);
2485 WARN_ON(I915_READ(FDI_RX_CTL(PIPE_C)) & FDI_RX_ENABLE);
2487 temp = I915_READ(SOUTH_CHICKEN1);
2488 temp &= ~FDI_BC_BIFURCATION_SELECT;
2489 DRM_DEBUG_KMS("disabling fdi C rx\n");
2490 I915_WRITE(SOUTH_CHICKEN1, temp);
2494 /* The FDI link training functions for ILK/Ibexpeak. */
2495 static void ironlake_fdi_link_train(struct drm_crtc *crtc)
2497 struct drm_device *dev = crtc->dev;
2498 struct drm_i915_private *dev_priv = dev->dev_private;
2499 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
2500 int pipe = intel_crtc->pipe;
2501 int plane = intel_crtc->plane;
2502 u32 reg, temp, tries;
2504 /* FDI needs bits from pipe & plane first */
2505 assert_pipe_enabled(dev_priv, pipe);
2506 assert_plane_enabled(dev_priv, plane);
2508 /* Train 1: umask FDI RX Interrupt symbol_lock and bit_lock bit
2510 reg = FDI_RX_IMR(pipe);
2511 temp = I915_READ(reg);
2512 temp &= ~FDI_RX_SYMBOL_LOCK;
2513 temp &= ~FDI_RX_BIT_LOCK;
2514 I915_WRITE(reg, temp);
2518 /* enable CPU FDI TX and PCH FDI RX */
2519 reg = FDI_TX_CTL(pipe);
2520 temp = I915_READ(reg);
2521 temp &= ~FDI_DP_PORT_WIDTH_MASK;
2522 temp |= FDI_DP_PORT_WIDTH(intel_crtc->config.fdi_lanes);
2523 temp &= ~FDI_LINK_TRAIN_NONE;
2524 temp |= FDI_LINK_TRAIN_PATTERN_1;
2525 I915_WRITE(reg, temp | FDI_TX_ENABLE);
2527 reg = FDI_RX_CTL(pipe);
2528 temp = I915_READ(reg);
2529 temp &= ~FDI_LINK_TRAIN_NONE;
2530 temp |= FDI_LINK_TRAIN_PATTERN_1;
2531 I915_WRITE(reg, temp | FDI_RX_ENABLE);
2536 /* Ironlake workaround, enable clock pointer after FDI enable*/
2537 I915_WRITE(FDI_RX_CHICKEN(pipe), FDI_RX_PHASE_SYNC_POINTER_OVR);
2538 I915_WRITE(FDI_RX_CHICKEN(pipe), FDI_RX_PHASE_SYNC_POINTER_OVR |
2539 FDI_RX_PHASE_SYNC_POINTER_EN);
2541 reg = FDI_RX_IIR(pipe);
2542 for (tries = 0; tries < 5; tries++) {
2543 temp = I915_READ(reg);
2544 DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
2546 if ((temp & FDI_RX_BIT_LOCK)) {
2547 DRM_DEBUG_KMS("FDI train 1 done.\n");
2548 I915_WRITE(reg, temp | FDI_RX_BIT_LOCK);
2553 DRM_ERROR("FDI train 1 fail!\n");
2556 reg = FDI_TX_CTL(pipe);
2557 temp = I915_READ(reg);
2558 temp &= ~FDI_LINK_TRAIN_NONE;
2559 temp |= FDI_LINK_TRAIN_PATTERN_2;
2560 I915_WRITE(reg, temp);
2562 reg = FDI_RX_CTL(pipe);
2563 temp = I915_READ(reg);
2564 temp &= ~FDI_LINK_TRAIN_NONE;
2565 temp |= FDI_LINK_TRAIN_PATTERN_2;
2566 I915_WRITE(reg, temp);
2571 reg = FDI_RX_IIR(pipe);
2572 for (tries = 0; tries < 5; tries++) {
2573 temp = I915_READ(reg);
2574 DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
2576 if (temp & FDI_RX_SYMBOL_LOCK) {
2577 I915_WRITE(reg, temp | FDI_RX_SYMBOL_LOCK);
2578 DRM_DEBUG_KMS("FDI train 2 done.\n");
2583 DRM_ERROR("FDI train 2 fail!\n");
2585 DRM_DEBUG_KMS("FDI train done\n");
2589 static const int snb_b_fdi_train_param[] = {
2590 FDI_LINK_TRAIN_400MV_0DB_SNB_B,
2591 FDI_LINK_TRAIN_400MV_6DB_SNB_B,
2592 FDI_LINK_TRAIN_600MV_3_5DB_SNB_B,
2593 FDI_LINK_TRAIN_800MV_0DB_SNB_B,
2596 /* The FDI link training functions for SNB/Cougarpoint. */
2597 static void gen6_fdi_link_train(struct drm_crtc *crtc)
2599 struct drm_device *dev = crtc->dev;
2600 struct drm_i915_private *dev_priv = dev->dev_private;
2601 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
2602 int pipe = intel_crtc->pipe;
2603 u32 reg, temp, i, retry;
2605 /* Train 1: umask FDI RX Interrupt symbol_lock and bit_lock bit
2607 reg = FDI_RX_IMR(pipe);
2608 temp = I915_READ(reg);
2609 temp &= ~FDI_RX_SYMBOL_LOCK;
2610 temp &= ~FDI_RX_BIT_LOCK;
2611 I915_WRITE(reg, temp);
2616 /* enable CPU FDI TX and PCH FDI RX */
2617 reg = FDI_TX_CTL(pipe);
2618 temp = I915_READ(reg);
2619 temp &= ~FDI_DP_PORT_WIDTH_MASK;
2620 temp |= FDI_DP_PORT_WIDTH(intel_crtc->config.fdi_lanes);
2621 temp &= ~FDI_LINK_TRAIN_NONE;
2622 temp |= FDI_LINK_TRAIN_PATTERN_1;
2623 temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
2625 temp |= FDI_LINK_TRAIN_400MV_0DB_SNB_B;
2626 I915_WRITE(reg, temp | FDI_TX_ENABLE);
2628 I915_WRITE(FDI_RX_MISC(pipe),
2629 FDI_RX_TP1_TO_TP2_48 | FDI_RX_FDI_DELAY_90);
2631 reg = FDI_RX_CTL(pipe);
2632 temp = I915_READ(reg);
2633 if (HAS_PCH_CPT(dev)) {
2634 temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
2635 temp |= FDI_LINK_TRAIN_PATTERN_1_CPT;
2637 temp &= ~FDI_LINK_TRAIN_NONE;
2638 temp |= FDI_LINK_TRAIN_PATTERN_1;
2640 I915_WRITE(reg, temp | FDI_RX_ENABLE);
2645 for (i = 0; i < 4; i++) {
2646 reg = FDI_TX_CTL(pipe);
2647 temp = I915_READ(reg);
2648 temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
2649 temp |= snb_b_fdi_train_param[i];
2650 I915_WRITE(reg, temp);
2655 for (retry = 0; retry < 5; retry++) {
2656 reg = FDI_RX_IIR(pipe);
2657 temp = I915_READ(reg);
2658 DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
2659 if (temp & FDI_RX_BIT_LOCK) {
2660 I915_WRITE(reg, temp | FDI_RX_BIT_LOCK);
2661 DRM_DEBUG_KMS("FDI train 1 done.\n");
2670 DRM_ERROR("FDI train 1 fail!\n");
2673 reg = FDI_TX_CTL(pipe);
2674 temp = I915_READ(reg);
2675 temp &= ~FDI_LINK_TRAIN_NONE;
2676 temp |= FDI_LINK_TRAIN_PATTERN_2;
2678 temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
2680 temp |= FDI_LINK_TRAIN_400MV_0DB_SNB_B;
2682 I915_WRITE(reg, temp);
2684 reg = FDI_RX_CTL(pipe);
2685 temp = I915_READ(reg);
2686 if (HAS_PCH_CPT(dev)) {
2687 temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
2688 temp |= FDI_LINK_TRAIN_PATTERN_2_CPT;
2690 temp &= ~FDI_LINK_TRAIN_NONE;
2691 temp |= FDI_LINK_TRAIN_PATTERN_2;
2693 I915_WRITE(reg, temp);
2698 for (i = 0; i < 4; i++) {
2699 reg = FDI_TX_CTL(pipe);
2700 temp = I915_READ(reg);
2701 temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
2702 temp |= snb_b_fdi_train_param[i];
2703 I915_WRITE(reg, temp);
2708 for (retry = 0; retry < 5; retry++) {
2709 reg = FDI_RX_IIR(pipe);
2710 temp = I915_READ(reg);
2711 DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
2712 if (temp & FDI_RX_SYMBOL_LOCK) {
2713 I915_WRITE(reg, temp | FDI_RX_SYMBOL_LOCK);
2714 DRM_DEBUG_KMS("FDI train 2 done.\n");
2723 DRM_ERROR("FDI train 2 fail!\n");
2725 DRM_DEBUG_KMS("FDI train done.\n");
2728 /* Manual link training for Ivy Bridge A0 parts */
2729 static void ivb_manual_fdi_link_train(struct drm_crtc *crtc)
2731 struct drm_device *dev = crtc->dev;
2732 struct drm_i915_private *dev_priv = dev->dev_private;
2733 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
2734 int pipe = intel_crtc->pipe;
2735 u32 reg, temp, i, j;
2737 /* Train 1: umask FDI RX Interrupt symbol_lock and bit_lock bit
2739 reg = FDI_RX_IMR(pipe);
2740 temp = I915_READ(reg);
2741 temp &= ~FDI_RX_SYMBOL_LOCK;
2742 temp &= ~FDI_RX_BIT_LOCK;
2743 I915_WRITE(reg, temp);
2748 DRM_DEBUG_KMS("FDI_RX_IIR before link train 0x%x\n",
2749 I915_READ(FDI_RX_IIR(pipe)));
2751 /* Try each vswing and preemphasis setting twice before moving on */
2752 for (j = 0; j < ARRAY_SIZE(snb_b_fdi_train_param) * 2; j++) {
2753 /* disable first in case we need to retry */
2754 reg = FDI_TX_CTL(pipe);
2755 temp = I915_READ(reg);
2756 temp &= ~(FDI_LINK_TRAIN_AUTO | FDI_LINK_TRAIN_NONE_IVB);
2757 temp &= ~FDI_TX_ENABLE;
2758 I915_WRITE(reg, temp);
2760 reg = FDI_RX_CTL(pipe);
2761 temp = I915_READ(reg);
2762 temp &= ~FDI_LINK_TRAIN_AUTO;
2763 temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
2764 temp &= ~FDI_RX_ENABLE;
2765 I915_WRITE(reg, temp);
2767 /* enable CPU FDI TX and PCH FDI RX */
2768 reg = FDI_TX_CTL(pipe);
2769 temp = I915_READ(reg);
2770 temp &= ~FDI_DP_PORT_WIDTH_MASK;
2771 temp |= FDI_DP_PORT_WIDTH(intel_crtc->config.fdi_lanes);
2772 temp |= FDI_LINK_TRAIN_PATTERN_1_IVB;
2773 temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
2774 temp |= snb_b_fdi_train_param[j/2];
2775 temp |= FDI_COMPOSITE_SYNC;
2776 I915_WRITE(reg, temp | FDI_TX_ENABLE);
2778 I915_WRITE(FDI_RX_MISC(pipe),
2779 FDI_RX_TP1_TO_TP2_48 | FDI_RX_FDI_DELAY_90);
2781 reg = FDI_RX_CTL(pipe);
2782 temp = I915_READ(reg);
2783 temp |= FDI_LINK_TRAIN_PATTERN_1_CPT;
2784 temp |= FDI_COMPOSITE_SYNC;
2785 I915_WRITE(reg, temp | FDI_RX_ENABLE);
2788 udelay(1); /* should be 0.5us */
2790 for (i = 0; i < 4; i++) {
2791 reg = FDI_RX_IIR(pipe);
2792 temp = I915_READ(reg);
2793 DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
2795 if (temp & FDI_RX_BIT_LOCK ||
2796 (I915_READ(reg) & FDI_RX_BIT_LOCK)) {
2797 I915_WRITE(reg, temp | FDI_RX_BIT_LOCK);
2798 DRM_DEBUG_KMS("FDI train 1 done, level %i.\n",
2802 udelay(1); /* should be 0.5us */
2805 DRM_DEBUG_KMS("FDI train 1 fail on vswing %d\n", j / 2);
2810 reg = FDI_TX_CTL(pipe);
2811 temp = I915_READ(reg);
2812 temp &= ~FDI_LINK_TRAIN_NONE_IVB;
2813 temp |= FDI_LINK_TRAIN_PATTERN_2_IVB;
2814 I915_WRITE(reg, temp);
2816 reg = FDI_RX_CTL(pipe);
2817 temp = I915_READ(reg);
2818 temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
2819 temp |= FDI_LINK_TRAIN_PATTERN_2_CPT;
2820 I915_WRITE(reg, temp);
2823 udelay(2); /* should be 1.5us */
2825 for (i = 0; i < 4; i++) {
2826 reg = FDI_RX_IIR(pipe);
2827 temp = I915_READ(reg);
2828 DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
2830 if (temp & FDI_RX_SYMBOL_LOCK ||
2831 (I915_READ(reg) & FDI_RX_SYMBOL_LOCK)) {
2832 I915_WRITE(reg, temp | FDI_RX_SYMBOL_LOCK);
2833 DRM_DEBUG_KMS("FDI train 2 done, level %i.\n",
2837 udelay(2); /* should be 1.5us */
2840 DRM_DEBUG_KMS("FDI train 2 fail on vswing %d\n", j / 2);
2844 DRM_DEBUG_KMS("FDI train done.\n");
2847 static void ironlake_fdi_pll_enable(struct intel_crtc *intel_crtc)
2849 struct drm_device *dev = intel_crtc->base.dev;
2850 struct drm_i915_private *dev_priv = dev->dev_private;
2851 int pipe = intel_crtc->pipe;
2855 /* enable PCH FDI RX PLL, wait warmup plus DMI latency */
2856 reg = FDI_RX_CTL(pipe);
2857 temp = I915_READ(reg);
2858 temp &= ~(FDI_DP_PORT_WIDTH_MASK | (0x7 << 16));
2859 temp |= FDI_DP_PORT_WIDTH(intel_crtc->config.fdi_lanes);
2860 temp |= (I915_READ(PIPECONF(pipe)) & PIPECONF_BPC_MASK) << 11;
2861 I915_WRITE(reg, temp | FDI_RX_PLL_ENABLE);
2866 /* Switch from Rawclk to PCDclk */
2867 temp = I915_READ(reg);
2868 I915_WRITE(reg, temp | FDI_PCDCLK);
2873 /* Enable CPU FDI TX PLL, always on for Ironlake */
2874 reg = FDI_TX_CTL(pipe);
2875 temp = I915_READ(reg);
2876 if ((temp & FDI_TX_PLL_ENABLE) == 0) {
2877 I915_WRITE(reg, temp | FDI_TX_PLL_ENABLE);
2884 static void ironlake_fdi_pll_disable(struct intel_crtc *intel_crtc)
2886 struct drm_device *dev = intel_crtc->base.dev;
2887 struct drm_i915_private *dev_priv = dev->dev_private;
2888 int pipe = intel_crtc->pipe;
2891 /* Switch from PCDclk to Rawclk */
2892 reg = FDI_RX_CTL(pipe);
2893 temp = I915_READ(reg);
2894 I915_WRITE(reg, temp & ~FDI_PCDCLK);
2896 /* Disable CPU FDI TX PLL */
2897 reg = FDI_TX_CTL(pipe);
2898 temp = I915_READ(reg);
2899 I915_WRITE(reg, temp & ~FDI_TX_PLL_ENABLE);
2904 reg = FDI_RX_CTL(pipe);
2905 temp = I915_READ(reg);
2906 I915_WRITE(reg, temp & ~FDI_RX_PLL_ENABLE);
2908 /* Wait for the clocks to turn off. */
2913 static void ironlake_fdi_disable(struct drm_crtc *crtc)
2915 struct drm_device *dev = crtc->dev;
2916 struct drm_i915_private *dev_priv = dev->dev_private;
2917 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
2918 int pipe = intel_crtc->pipe;
2921 /* disable CPU FDI tx and PCH FDI rx */
2922 reg = FDI_TX_CTL(pipe);
2923 temp = I915_READ(reg);
2924 I915_WRITE(reg, temp & ~FDI_TX_ENABLE);
2927 reg = FDI_RX_CTL(pipe);
2928 temp = I915_READ(reg);
2929 temp &= ~(0x7 << 16);
2930 temp |= (I915_READ(PIPECONF(pipe)) & PIPECONF_BPC_MASK) << 11;
2931 I915_WRITE(reg, temp & ~FDI_RX_ENABLE);
2936 /* Ironlake workaround, disable clock pointer after downing FDI */
2937 if (HAS_PCH_IBX(dev)) {
2938 I915_WRITE(FDI_RX_CHICKEN(pipe), FDI_RX_PHASE_SYNC_POINTER_OVR);
2941 /* still set train pattern 1 */
2942 reg = FDI_TX_CTL(pipe);
2943 temp = I915_READ(reg);
2944 temp &= ~FDI_LINK_TRAIN_NONE;
2945 temp |= FDI_LINK_TRAIN_PATTERN_1;
2946 I915_WRITE(reg, temp);
2948 reg = FDI_RX_CTL(pipe);
2949 temp = I915_READ(reg);
2950 if (HAS_PCH_CPT(dev)) {
2951 temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
2952 temp |= FDI_LINK_TRAIN_PATTERN_1_CPT;
2954 temp &= ~FDI_LINK_TRAIN_NONE;
2955 temp |= FDI_LINK_TRAIN_PATTERN_1;
2957 /* BPC in FDI rx is consistent with that in PIPECONF */
2958 temp &= ~(0x07 << 16);
2959 temp |= (I915_READ(PIPECONF(pipe)) & PIPECONF_BPC_MASK) << 11;
2960 I915_WRITE(reg, temp);
2966 static bool intel_crtc_has_pending_flip(struct drm_crtc *crtc)
2968 struct drm_device *dev = crtc->dev;
2969 struct drm_i915_private *dev_priv = dev->dev_private;
2970 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
2971 unsigned long flags;
2974 if (i915_reset_in_progress(&dev_priv->gpu_error) ||
2975 intel_crtc->reset_counter != atomic_read(&dev_priv->gpu_error.reset_counter))
2978 spin_lock_irqsave(&dev->event_lock, flags);
2979 pending = to_intel_crtc(crtc)->unpin_work != NULL;
2980 spin_unlock_irqrestore(&dev->event_lock, flags);
2985 bool intel_has_pending_fb_unpin(struct drm_device *dev)
2987 struct intel_crtc *crtc;
2989 /* Note that we don't need to be called with mode_config.lock here
2990 * as our list of CRTC objects is static for the lifetime of the
2991 * device and so cannot disappear as we iterate. Similarly, we can
2992 * happily treat the predicates as racy, atomic checks as userspace
2993 * cannot claim and pin a new fb without at least acquring the
2994 * struct_mutex and so serialising with us.
2996 list_for_each_entry(crtc, &dev->mode_config.crtc_list, base.head) {
2997 if (atomic_read(&crtc->unpin_work_count) == 0)
3000 if (crtc->unpin_work)
3001 intel_wait_for_vblank(dev, crtc->pipe);
3009 static void intel_crtc_wait_for_pending_flips(struct drm_crtc *crtc)
3011 struct drm_device *dev = crtc->dev;
3012 struct drm_i915_private *dev_priv = dev->dev_private;
3014 if (crtc->fb == NULL)
3017 WARN_ON(waitqueue_active(&dev_priv->pending_flip_queue));
3019 wait_event(dev_priv->pending_flip_queue,
3020 !intel_crtc_has_pending_flip(crtc));
3022 mutex_lock(&dev->struct_mutex);
3023 intel_finish_fb(crtc->fb);
3024 mutex_unlock(&dev->struct_mutex);
3027 /* Program iCLKIP clock to the desired frequency */
3028 static void lpt_program_iclkip(struct drm_crtc *crtc)
3030 struct drm_device *dev = crtc->dev;
3031 struct drm_i915_private *dev_priv = dev->dev_private;
3032 int clock = to_intel_crtc(crtc)->config.adjusted_mode.crtc_clock;
3033 u32 divsel, phaseinc, auxdiv, phasedir = 0;
3036 mutex_lock(&dev_priv->dpio_lock);
3038 /* It is necessary to ungate the pixclk gate prior to programming
3039 * the divisors, and gate it back when it is done.
3041 I915_WRITE(PIXCLK_GATE, PIXCLK_GATE_GATE);
3043 /* Disable SSCCTL */
3044 intel_sbi_write(dev_priv, SBI_SSCCTL6,
3045 intel_sbi_read(dev_priv, SBI_SSCCTL6, SBI_ICLK) |
3049 /* 20MHz is a corner case which is out of range for the 7-bit divisor */
3050 if (clock == 20000) {
3055 /* The iCLK virtual clock root frequency is in MHz,
3056 * but the adjusted_mode->crtc_clock in in KHz. To get the
3057 * divisors, it is necessary to divide one by another, so we
3058 * convert the virtual clock precision to KHz here for higher
3061 u32 iclk_virtual_root_freq = 172800 * 1000;
3062 u32 iclk_pi_range = 64;
3063 u32 desired_divisor, msb_divisor_value, pi_value;
3065 desired_divisor = (iclk_virtual_root_freq / clock);
3066 msb_divisor_value = desired_divisor / iclk_pi_range;
3067 pi_value = desired_divisor % iclk_pi_range;
3070 divsel = msb_divisor_value - 2;
3071 phaseinc = pi_value;
3074 /* This should not happen with any sane values */
3075 WARN_ON(SBI_SSCDIVINTPHASE_DIVSEL(divsel) &
3076 ~SBI_SSCDIVINTPHASE_DIVSEL_MASK);
3077 WARN_ON(SBI_SSCDIVINTPHASE_DIR(phasedir) &
3078 ~SBI_SSCDIVINTPHASE_INCVAL_MASK);
3080 DRM_DEBUG_KMS("iCLKIP clock: found settings for %dKHz refresh rate: auxdiv=%x, divsel=%x, phasedir=%x, phaseinc=%x\n",
3087 /* Program SSCDIVINTPHASE6 */
3088 temp = intel_sbi_read(dev_priv, SBI_SSCDIVINTPHASE6, SBI_ICLK);
3089 temp &= ~SBI_SSCDIVINTPHASE_DIVSEL_MASK;
3090 temp |= SBI_SSCDIVINTPHASE_DIVSEL(divsel);
3091 temp &= ~SBI_SSCDIVINTPHASE_INCVAL_MASK;
3092 temp |= SBI_SSCDIVINTPHASE_INCVAL(phaseinc);
3093 temp |= SBI_SSCDIVINTPHASE_DIR(phasedir);
3094 temp |= SBI_SSCDIVINTPHASE_PROPAGATE;
3095 intel_sbi_write(dev_priv, SBI_SSCDIVINTPHASE6, temp, SBI_ICLK);
3097 /* Program SSCAUXDIV */
3098 temp = intel_sbi_read(dev_priv, SBI_SSCAUXDIV6, SBI_ICLK);
3099 temp &= ~SBI_SSCAUXDIV_FINALDIV2SEL(1);
3100 temp |= SBI_SSCAUXDIV_FINALDIV2SEL(auxdiv);
3101 intel_sbi_write(dev_priv, SBI_SSCAUXDIV6, temp, SBI_ICLK);
3103 /* Enable modulator and associated divider */
3104 temp = intel_sbi_read(dev_priv, SBI_SSCCTL6, SBI_ICLK);
3105 temp &= ~SBI_SSCCTL_DISABLE;
3106 intel_sbi_write(dev_priv, SBI_SSCCTL6, temp, SBI_ICLK);
3108 /* Wait for initialization time */
3111 I915_WRITE(PIXCLK_GATE, PIXCLK_GATE_UNGATE);
3113 mutex_unlock(&dev_priv->dpio_lock);
3116 static void ironlake_pch_transcoder_set_timings(struct intel_crtc *crtc,
3117 enum pipe pch_transcoder)
3119 struct drm_device *dev = crtc->base.dev;
3120 struct drm_i915_private *dev_priv = dev->dev_private;
3121 enum transcoder cpu_transcoder = crtc->config.cpu_transcoder;
3123 I915_WRITE(PCH_TRANS_HTOTAL(pch_transcoder),
3124 I915_READ(HTOTAL(cpu_transcoder)));
3125 I915_WRITE(PCH_TRANS_HBLANK(pch_transcoder),
3126 I915_READ(HBLANK(cpu_transcoder)));
3127 I915_WRITE(PCH_TRANS_HSYNC(pch_transcoder),
3128 I915_READ(HSYNC(cpu_transcoder)));
3130 I915_WRITE(PCH_TRANS_VTOTAL(pch_transcoder),
3131 I915_READ(VTOTAL(cpu_transcoder)));
3132 I915_WRITE(PCH_TRANS_VBLANK(pch_transcoder),
3133 I915_READ(VBLANK(cpu_transcoder)));
3134 I915_WRITE(PCH_TRANS_VSYNC(pch_transcoder),
3135 I915_READ(VSYNC(cpu_transcoder)));
3136 I915_WRITE(PCH_TRANS_VSYNCSHIFT(pch_transcoder),
3137 I915_READ(VSYNCSHIFT(cpu_transcoder)));
3140 static void cpt_enable_fdi_bc_bifurcation(struct drm_device *dev)
3142 struct drm_i915_private *dev_priv = dev->dev_private;
3145 temp = I915_READ(SOUTH_CHICKEN1);
3146 if (temp & FDI_BC_BIFURCATION_SELECT)
3149 WARN_ON(I915_READ(FDI_RX_CTL(PIPE_B)) & FDI_RX_ENABLE);
3150 WARN_ON(I915_READ(FDI_RX_CTL(PIPE_C)) & FDI_RX_ENABLE);
3152 temp |= FDI_BC_BIFURCATION_SELECT;
3153 DRM_DEBUG_KMS("enabling fdi C rx\n");
3154 I915_WRITE(SOUTH_CHICKEN1, temp);
3155 POSTING_READ(SOUTH_CHICKEN1);
3158 static void ivybridge_update_fdi_bc_bifurcation(struct intel_crtc *intel_crtc)
3160 struct drm_device *dev = intel_crtc->base.dev;
3161 struct drm_i915_private *dev_priv = dev->dev_private;
3163 switch (intel_crtc->pipe) {
3167 if (intel_crtc->config.fdi_lanes > 2)
3168 WARN_ON(I915_READ(SOUTH_CHICKEN1) & FDI_BC_BIFURCATION_SELECT);
3170 cpt_enable_fdi_bc_bifurcation(dev);
3174 cpt_enable_fdi_bc_bifurcation(dev);
3183 * Enable PCH resources required for PCH ports:
3185 * - FDI training & RX/TX
3186 * - update transcoder timings
3187 * - DP transcoding bits
3190 static void ironlake_pch_enable(struct drm_crtc *crtc)
3192 struct drm_device *dev = crtc->dev;
3193 struct drm_i915_private *dev_priv = dev->dev_private;
3194 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3195 int pipe = intel_crtc->pipe;
3198 assert_pch_transcoder_disabled(dev_priv, pipe);
3200 if (IS_IVYBRIDGE(dev))
3201 ivybridge_update_fdi_bc_bifurcation(intel_crtc);
3203 /* Write the TU size bits before fdi link training, so that error
3204 * detection works. */
3205 I915_WRITE(FDI_RX_TUSIZE1(pipe),
3206 I915_READ(PIPE_DATA_M1(pipe)) & TU_SIZE_MASK);
3208 /* For PCH output, training FDI link */
3209 dev_priv->display.fdi_link_train(crtc);
3211 /* We need to program the right clock selection before writing the pixel
3212 * mutliplier into the DPLL. */
3213 if (HAS_PCH_CPT(dev)) {
3216 temp = I915_READ(PCH_DPLL_SEL);
3217 temp |= TRANS_DPLL_ENABLE(pipe);
3218 sel = TRANS_DPLLB_SEL(pipe);
3219 if (intel_crtc->config.shared_dpll == DPLL_ID_PCH_PLL_B)
3223 I915_WRITE(PCH_DPLL_SEL, temp);
3226 /* XXX: pch pll's can be enabled any time before we enable the PCH
3227 * transcoder, and we actually should do this to not upset any PCH
3228 * transcoder that already use the clock when we share it.
3230 * Note that enable_shared_dpll tries to do the right thing, but
3231 * get_shared_dpll unconditionally resets the pll - we need that to have
3232 * the right LVDS enable sequence. */
3233 ironlake_enable_shared_dpll(intel_crtc);
3235 /* set transcoder timing, panel must allow it */
3236 assert_panel_unlocked(dev_priv, pipe);
3237 ironlake_pch_transcoder_set_timings(intel_crtc, pipe);
3239 intel_fdi_normal_train(crtc);
3241 /* For PCH DP, enable TRANS_DP_CTL */
3242 if (HAS_PCH_CPT(dev) &&
3243 (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT) ||
3244 intel_pipe_has_type(crtc, INTEL_OUTPUT_EDP))) {
3245 u32 bpc = (I915_READ(PIPECONF(pipe)) & PIPECONF_BPC_MASK) >> 5;
3246 reg = TRANS_DP_CTL(pipe);
3247 temp = I915_READ(reg);
3248 temp &= ~(TRANS_DP_PORT_SEL_MASK |
3249 TRANS_DP_SYNC_MASK |
3251 temp |= (TRANS_DP_OUTPUT_ENABLE |
3252 TRANS_DP_ENH_FRAMING);
3253 temp |= bpc << 9; /* same format but at 11:9 */
3255 if (crtc->mode.flags & DRM_MODE_FLAG_PHSYNC)
3256 temp |= TRANS_DP_HSYNC_ACTIVE_HIGH;
3257 if (crtc->mode.flags & DRM_MODE_FLAG_PVSYNC)
3258 temp |= TRANS_DP_VSYNC_ACTIVE_HIGH;
3260 switch (intel_trans_dp_port_sel(crtc)) {
3262 temp |= TRANS_DP_PORT_SEL_B;
3265 temp |= TRANS_DP_PORT_SEL_C;
3268 temp |= TRANS_DP_PORT_SEL_D;
3274 I915_WRITE(reg, temp);
3277 ironlake_enable_pch_transcoder(dev_priv, pipe);
3280 static void lpt_pch_enable(struct drm_crtc *crtc)
3282 struct drm_device *dev = crtc->dev;
3283 struct drm_i915_private *dev_priv = dev->dev_private;
3284 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3285 enum transcoder cpu_transcoder = intel_crtc->config.cpu_transcoder;
3287 assert_pch_transcoder_disabled(dev_priv, TRANSCODER_A);
3289 lpt_program_iclkip(crtc);
3291 /* Set transcoder timing. */
3292 ironlake_pch_transcoder_set_timings(intel_crtc, PIPE_A);
3294 lpt_enable_pch_transcoder(dev_priv, cpu_transcoder);
3297 static void intel_put_shared_dpll(struct intel_crtc *crtc)
3299 struct intel_shared_dpll *pll = intel_crtc_to_shared_dpll(crtc);
3304 if (pll->refcount == 0) {
3305 WARN(1, "bad %s refcount\n", pll->name);
3309 if (--pll->refcount == 0) {
3311 WARN_ON(pll->active);
3314 crtc->config.shared_dpll = DPLL_ID_PRIVATE;
3317 static struct intel_shared_dpll *intel_get_shared_dpll(struct intel_crtc *crtc)
3319 struct drm_i915_private *dev_priv = crtc->base.dev->dev_private;
3320 struct intel_shared_dpll *pll = intel_crtc_to_shared_dpll(crtc);
3321 enum intel_dpll_id i;
3324 DRM_DEBUG_KMS("CRTC:%d dropping existing %s\n",
3325 crtc->base.base.id, pll->name);
3326 intel_put_shared_dpll(crtc);
3329 if (HAS_PCH_IBX(dev_priv->dev)) {
3330 /* Ironlake PCH has a fixed PLL->PCH pipe mapping. */
3331 i = (enum intel_dpll_id) crtc->pipe;
3332 pll = &dev_priv->shared_dplls[i];
3334 DRM_DEBUG_KMS("CRTC:%d using pre-allocated %s\n",
3335 crtc->base.base.id, pll->name);
3340 for (i = 0; i < dev_priv->num_shared_dpll; i++) {
3341 pll = &dev_priv->shared_dplls[i];
3343 /* Only want to check enabled timings first */
3344 if (pll->refcount == 0)
3347 if (memcmp(&crtc->config.dpll_hw_state, &pll->hw_state,
3348 sizeof(pll->hw_state)) == 0) {
3349 DRM_DEBUG_KMS("CRTC:%d sharing existing %s (refcount %d, ative %d)\n",
3351 pll->name, pll->refcount, pll->active);
3357 /* Ok no matching timings, maybe there's a free one? */
3358 for (i = 0; i < dev_priv->num_shared_dpll; i++) {
3359 pll = &dev_priv->shared_dplls[i];
3360 if (pll->refcount == 0) {
3361 DRM_DEBUG_KMS("CRTC:%d allocated %s\n",
3362 crtc->base.base.id, pll->name);
3370 crtc->config.shared_dpll = i;
3371 DRM_DEBUG_DRIVER("using %s for pipe %c\n", pll->name,
3372 pipe_name(crtc->pipe));
3374 if (pll->active == 0) {
3375 memcpy(&pll->hw_state, &crtc->config.dpll_hw_state,
3376 sizeof(pll->hw_state));
3378 DRM_DEBUG_DRIVER("setting up %s\n", pll->name);
3380 assert_shared_dpll_disabled(dev_priv, pll);
3382 pll->mode_set(dev_priv, pll);
3389 static void cpt_verify_modeset(struct drm_device *dev, int pipe)
3391 struct drm_i915_private *dev_priv = dev->dev_private;
3392 int dslreg = PIPEDSL(pipe);
3395 temp = I915_READ(dslreg);
3397 if (wait_for(I915_READ(dslreg) != temp, 5)) {
3398 if (wait_for(I915_READ(dslreg) != temp, 5))
3399 DRM_ERROR("mode set failed: pipe %c stuck\n", pipe_name(pipe));
3403 static void ironlake_pfit_enable(struct intel_crtc *crtc)
3405 struct drm_device *dev = crtc->base.dev;
3406 struct drm_i915_private *dev_priv = dev->dev_private;
3407 int pipe = crtc->pipe;
3409 if (crtc->config.pch_pfit.enabled) {
3410 /* Force use of hard-coded filter coefficients
3411 * as some pre-programmed values are broken,
3414 if (IS_IVYBRIDGE(dev) || IS_HASWELL(dev))
3415 I915_WRITE(PF_CTL(pipe), PF_ENABLE | PF_FILTER_MED_3x3 |
3416 PF_PIPE_SEL_IVB(pipe));
3418 I915_WRITE(PF_CTL(pipe), PF_ENABLE | PF_FILTER_MED_3x3);
3419 I915_WRITE(PF_WIN_POS(pipe), crtc->config.pch_pfit.pos);
3420 I915_WRITE(PF_WIN_SZ(pipe), crtc->config.pch_pfit.size);
3424 static void intel_enable_planes(struct drm_crtc *crtc)
3426 struct drm_device *dev = crtc->dev;
3427 enum pipe pipe = to_intel_crtc(crtc)->pipe;
3428 struct intel_plane *intel_plane;
3430 list_for_each_entry(intel_plane, &dev->mode_config.plane_list, base.head)
3431 if (intel_plane->pipe == pipe)
3432 intel_plane_restore(&intel_plane->base);
3435 static void intel_disable_planes(struct drm_crtc *crtc)
3437 struct drm_device *dev = crtc->dev;
3438 enum pipe pipe = to_intel_crtc(crtc)->pipe;
3439 struct intel_plane *intel_plane;
3441 list_for_each_entry(intel_plane, &dev->mode_config.plane_list, base.head)
3442 if (intel_plane->pipe == pipe)
3443 intel_plane_disable(&intel_plane->base);
3446 void hsw_enable_ips(struct intel_crtc *crtc)
3448 struct drm_i915_private *dev_priv = crtc->base.dev->dev_private;
3450 if (!crtc->config.ips_enabled)
3453 /* We can only enable IPS after we enable a plane and wait for a vblank.
3454 * We guarantee that the plane is enabled by calling intel_enable_ips
3455 * only after intel_enable_plane. And intel_enable_plane already waits
3456 * for a vblank, so all we need to do here is to enable the IPS bit. */
3457 assert_plane_enabled(dev_priv, crtc->plane);
3458 if (IS_BROADWELL(crtc->base.dev)) {
3459 mutex_lock(&dev_priv->rps.hw_lock);
3460 WARN_ON(sandybridge_pcode_write(dev_priv, DISPLAY_IPS_CONTROL, 0xc0000000));
3461 mutex_unlock(&dev_priv->rps.hw_lock);
3462 /* Quoting Art Runyan: "its not safe to expect any particular
3463 * value in IPS_CTL bit 31 after enabling IPS through the
3464 * mailbox." Moreover, the mailbox may return a bogus state,
3465 * so we need to just enable it and continue on.
3468 I915_WRITE(IPS_CTL, IPS_ENABLE);
3469 /* The bit only becomes 1 in the next vblank, so this wait here
3470 * is essentially intel_wait_for_vblank. If we don't have this
3471 * and don't wait for vblanks until the end of crtc_enable, then
3472 * the HW state readout code will complain that the expected
3473 * IPS_CTL value is not the one we read. */
3474 if (wait_for(I915_READ_NOTRACE(IPS_CTL) & IPS_ENABLE, 50))
3475 DRM_ERROR("Timed out waiting for IPS enable\n");
3479 void hsw_disable_ips(struct intel_crtc *crtc)
3481 struct drm_device *dev = crtc->base.dev;
3482 struct drm_i915_private *dev_priv = dev->dev_private;
3484 if (!crtc->config.ips_enabled)
3487 assert_plane_enabled(dev_priv, crtc->plane);
3488 if (IS_BROADWELL(crtc->base.dev)) {
3489 mutex_lock(&dev_priv->rps.hw_lock);
3490 WARN_ON(sandybridge_pcode_write(dev_priv, DISPLAY_IPS_CONTROL, 0));
3491 mutex_unlock(&dev_priv->rps.hw_lock);
3493 I915_WRITE(IPS_CTL, 0);
3494 POSTING_READ(IPS_CTL);
3497 /* We need to wait for a vblank before we can disable the plane. */
3498 intel_wait_for_vblank(dev, crtc->pipe);
3501 /** Loads the palette/gamma unit for the CRTC with the prepared values */
3502 static void intel_crtc_load_lut(struct drm_crtc *crtc)
3504 struct drm_device *dev = crtc->dev;
3505 struct drm_i915_private *dev_priv = dev->dev_private;
3506 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3507 enum pipe pipe = intel_crtc->pipe;
3508 int palreg = PALETTE(pipe);
3510 bool reenable_ips = false;
3512 /* The clocks have to be on to load the palette. */
3513 if (!crtc->enabled || !intel_crtc->active)
3516 if (!HAS_PCH_SPLIT(dev_priv->dev)) {
3517 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DSI))
3518 assert_dsi_pll_enabled(dev_priv);
3520 assert_pll_enabled(dev_priv, pipe);
3523 /* use legacy palette for Ironlake */
3524 if (HAS_PCH_SPLIT(dev))
3525 palreg = LGC_PALETTE(pipe);
3527 /* Workaround : Do not read or write the pipe palette/gamma data while
3528 * GAMMA_MODE is configured for split gamma and IPS_CTL has IPS enabled.
3530 if (IS_HASWELL(dev) && intel_crtc->config.ips_enabled &&
3531 ((I915_READ(GAMMA_MODE(pipe)) & GAMMA_MODE_MODE_MASK) ==
3532 GAMMA_MODE_MODE_SPLIT)) {
3533 hsw_disable_ips(intel_crtc);
3534 reenable_ips = true;
3537 for (i = 0; i < 256; i++) {
3538 I915_WRITE(palreg + 4 * i,
3539 (intel_crtc->lut_r[i] << 16) |
3540 (intel_crtc->lut_g[i] << 8) |
3541 intel_crtc->lut_b[i]);
3545 hsw_enable_ips(intel_crtc);
3548 static void ironlake_crtc_enable(struct drm_crtc *crtc)
3550 struct drm_device *dev = crtc->dev;
3551 struct drm_i915_private *dev_priv = dev->dev_private;
3552 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3553 struct intel_encoder *encoder;
3554 int pipe = intel_crtc->pipe;
3555 int plane = intel_crtc->plane;
3557 WARN_ON(!crtc->enabled);
3559 if (intel_crtc->active)
3562 intel_crtc->active = true;
3564 intel_set_cpu_fifo_underrun_reporting(dev, pipe, true);
3565 intel_set_pch_fifo_underrun_reporting(dev, pipe, true);
3567 for_each_encoder_on_crtc(dev, crtc, encoder)
3568 if (encoder->pre_enable)
3569 encoder->pre_enable(encoder);
3571 if (intel_crtc->config.has_pch_encoder) {
3572 /* Note: FDI PLL enabling _must_ be done before we enable the
3573 * cpu pipes, hence this is separate from all the other fdi/pch
3575 ironlake_fdi_pll_enable(intel_crtc);
3577 assert_fdi_tx_disabled(dev_priv, pipe);
3578 assert_fdi_rx_disabled(dev_priv, pipe);
3581 ironlake_pfit_enable(intel_crtc);
3584 * On ILK+ LUT must be loaded before the pipe is running but with
3587 intel_crtc_load_lut(crtc);
3589 intel_update_watermarks(crtc);
3590 intel_enable_pipe(dev_priv, pipe,
3591 intel_crtc->config.has_pch_encoder, false);
3592 intel_enable_primary_plane(dev_priv, plane, pipe);
3593 intel_enable_planes(crtc);
3594 intel_crtc_update_cursor(crtc, true);
3596 if (intel_crtc->config.has_pch_encoder)
3597 ironlake_pch_enable(crtc);
3599 mutex_lock(&dev->struct_mutex);
3600 intel_update_fbc(dev);
3601 mutex_unlock(&dev->struct_mutex);
3603 for_each_encoder_on_crtc(dev, crtc, encoder)
3604 encoder->enable(encoder);
3606 if (HAS_PCH_CPT(dev))
3607 cpt_verify_modeset(dev, intel_crtc->pipe);
3610 * There seems to be a race in PCH platform hw (at least on some
3611 * outputs) where an enabled pipe still completes any pageflip right
3612 * away (as if the pipe is off) instead of waiting for vblank. As soon
3613 * as the first vblank happend, everything works as expected. Hence just
3614 * wait for one vblank before returning to avoid strange things
3617 intel_wait_for_vblank(dev, intel_crtc->pipe);
3620 /* IPS only exists on ULT machines and is tied to pipe A. */
3621 static bool hsw_crtc_supports_ips(struct intel_crtc *crtc)
3623 return HAS_IPS(crtc->base.dev) && crtc->pipe == PIPE_A;
3626 static void haswell_crtc_enable_planes(struct drm_crtc *crtc)
3628 struct drm_device *dev = crtc->dev;
3629 struct drm_i915_private *dev_priv = dev->dev_private;
3630 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3631 int pipe = intel_crtc->pipe;
3632 int plane = intel_crtc->plane;
3634 intel_enable_primary_plane(dev_priv, plane, pipe);
3635 intel_enable_planes(crtc);
3636 intel_crtc_update_cursor(crtc, true);
3638 hsw_enable_ips(intel_crtc);
3640 mutex_lock(&dev->struct_mutex);
3641 intel_update_fbc(dev);
3642 mutex_unlock(&dev->struct_mutex);
3645 static void haswell_crtc_disable_planes(struct drm_crtc *crtc)
3647 struct drm_device *dev = crtc->dev;
3648 struct drm_i915_private *dev_priv = dev->dev_private;
3649 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3650 int pipe = intel_crtc->pipe;
3651 int plane = intel_crtc->plane;
3653 intel_crtc_wait_for_pending_flips(crtc);
3654 drm_vblank_off(dev, pipe);
3656 /* FBC must be disabled before disabling the plane on HSW. */
3657 if (dev_priv->fbc.plane == plane)
3658 intel_disable_fbc(dev);
3660 hsw_disable_ips(intel_crtc);
3662 intel_crtc_update_cursor(crtc, false);
3663 intel_disable_planes(crtc);
3664 intel_disable_primary_plane(dev_priv, plane, pipe);
3668 * This implements the workaround described in the "notes" section of the mode
3669 * set sequence documentation. When going from no pipes or single pipe to
3670 * multiple pipes, and planes are enabled after the pipe, we need to wait at
3671 * least 2 vblanks on the first pipe before enabling planes on the second pipe.
3673 static void haswell_mode_set_planes_workaround(struct intel_crtc *crtc)
3675 struct drm_device *dev = crtc->base.dev;
3676 struct intel_crtc *crtc_it, *other_active_crtc = NULL;
3678 /* We want to get the other_active_crtc only if there's only 1 other
3680 list_for_each_entry(crtc_it, &dev->mode_config.crtc_list, base.head) {
3681 if (!crtc_it->active || crtc_it == crtc)
3684 if (other_active_crtc)
3687 other_active_crtc = crtc_it;
3689 if (!other_active_crtc)
3692 intel_wait_for_vblank(dev, other_active_crtc->pipe);
3693 intel_wait_for_vblank(dev, other_active_crtc->pipe);
3696 static void haswell_crtc_enable(struct drm_crtc *crtc)
3698 struct drm_device *dev = crtc->dev;
3699 struct drm_i915_private *dev_priv = dev->dev_private;
3700 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3701 struct intel_encoder *encoder;
3702 int pipe = intel_crtc->pipe;
3704 WARN_ON(!crtc->enabled);
3706 if (intel_crtc->active)
3709 intel_crtc->active = true;
3711 intel_set_cpu_fifo_underrun_reporting(dev, pipe, true);
3712 if (intel_crtc->config.has_pch_encoder)
3713 intel_set_pch_fifo_underrun_reporting(dev, TRANSCODER_A, true);
3715 if (intel_crtc->config.has_pch_encoder)
3716 dev_priv->display.fdi_link_train(crtc);
3718 for_each_encoder_on_crtc(dev, crtc, encoder)
3719 if (encoder->pre_enable)
3720 encoder->pre_enable(encoder);
3722 intel_ddi_enable_pipe_clock(intel_crtc);
3724 ironlake_pfit_enable(intel_crtc);
3727 * On ILK+ LUT must be loaded before the pipe is running but with
3730 intel_crtc_load_lut(crtc);
3732 intel_ddi_set_pipe_settings(crtc);
3733 intel_ddi_enable_transcoder_func(crtc);
3735 intel_update_watermarks(crtc);
3736 intel_enable_pipe(dev_priv, pipe,
3737 intel_crtc->config.has_pch_encoder, false);
3739 if (intel_crtc->config.has_pch_encoder)
3740 lpt_pch_enable(crtc);
3742 for_each_encoder_on_crtc(dev, crtc, encoder) {
3743 encoder->enable(encoder);
3744 intel_opregion_notify_encoder(encoder, true);
3747 /* If we change the relative order between pipe/planes enabling, we need
3748 * to change the workaround. */
3749 haswell_mode_set_planes_workaround(intel_crtc);
3750 haswell_crtc_enable_planes(crtc);
3753 * There seems to be a race in PCH platform hw (at least on some
3754 * outputs) where an enabled pipe still completes any pageflip right
3755 * away (as if the pipe is off) instead of waiting for vblank. As soon
3756 * as the first vblank happend, everything works as expected. Hence just
3757 * wait for one vblank before returning to avoid strange things
3760 intel_wait_for_vblank(dev, intel_crtc->pipe);
3763 static void ironlake_pfit_disable(struct intel_crtc *crtc)
3765 struct drm_device *dev = crtc->base.dev;
3766 struct drm_i915_private *dev_priv = dev->dev_private;
3767 int pipe = crtc->pipe;
3769 /* To avoid upsetting the power well on haswell only disable the pfit if
3770 * it's in use. The hw state code will make sure we get this right. */
3771 if (crtc->config.pch_pfit.enabled) {
3772 I915_WRITE(PF_CTL(pipe), 0);
3773 I915_WRITE(PF_WIN_POS(pipe), 0);
3774 I915_WRITE(PF_WIN_SZ(pipe), 0);
3778 static void ironlake_crtc_disable(struct drm_crtc *crtc)
3780 struct drm_device *dev = crtc->dev;
3781 struct drm_i915_private *dev_priv = dev->dev_private;
3782 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3783 struct intel_encoder *encoder;
3784 int pipe = intel_crtc->pipe;
3785 int plane = intel_crtc->plane;
3789 if (!intel_crtc->active)
3792 for_each_encoder_on_crtc(dev, crtc, encoder)
3793 encoder->disable(encoder);
3795 intel_crtc_wait_for_pending_flips(crtc);
3796 drm_vblank_off(dev, pipe);
3798 if (dev_priv->fbc.plane == plane)
3799 intel_disable_fbc(dev);
3801 intel_crtc_update_cursor(crtc, false);
3802 intel_disable_planes(crtc);
3803 intel_disable_primary_plane(dev_priv, plane, pipe);
3805 if (intel_crtc->config.has_pch_encoder)
3806 intel_set_pch_fifo_underrun_reporting(dev, pipe, false);
3808 intel_disable_pipe(dev_priv, pipe);
3810 ironlake_pfit_disable(intel_crtc);
3812 for_each_encoder_on_crtc(dev, crtc, encoder)
3813 if (encoder->post_disable)
3814 encoder->post_disable(encoder);
3816 if (intel_crtc->config.has_pch_encoder) {
3817 ironlake_fdi_disable(crtc);
3819 ironlake_disable_pch_transcoder(dev_priv, pipe);
3820 intel_set_pch_fifo_underrun_reporting(dev, pipe, true);
3822 if (HAS_PCH_CPT(dev)) {
3823 /* disable TRANS_DP_CTL */
3824 reg = TRANS_DP_CTL(pipe);
3825 temp = I915_READ(reg);
3826 temp &= ~(TRANS_DP_OUTPUT_ENABLE |
3827 TRANS_DP_PORT_SEL_MASK);
3828 temp |= TRANS_DP_PORT_SEL_NONE;
3829 I915_WRITE(reg, temp);
3831 /* disable DPLL_SEL */
3832 temp = I915_READ(PCH_DPLL_SEL);
3833 temp &= ~(TRANS_DPLL_ENABLE(pipe) | TRANS_DPLLB_SEL(pipe));
3834 I915_WRITE(PCH_DPLL_SEL, temp);
3837 /* disable PCH DPLL */
3838 intel_disable_shared_dpll(intel_crtc);
3840 ironlake_fdi_pll_disable(intel_crtc);
3843 intel_crtc->active = false;
3844 intel_update_watermarks(crtc);
3846 mutex_lock(&dev->struct_mutex);
3847 intel_update_fbc(dev);
3848 mutex_unlock(&dev->struct_mutex);
3851 static void haswell_crtc_disable(struct drm_crtc *crtc)
3853 struct drm_device *dev = crtc->dev;
3854 struct drm_i915_private *dev_priv = dev->dev_private;
3855 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3856 struct intel_encoder *encoder;
3857 int pipe = intel_crtc->pipe;
3858 enum transcoder cpu_transcoder = intel_crtc->config.cpu_transcoder;
3860 if (!intel_crtc->active)
3863 haswell_crtc_disable_planes(crtc);
3865 for_each_encoder_on_crtc(dev, crtc, encoder) {
3866 intel_opregion_notify_encoder(encoder, false);
3867 encoder->disable(encoder);
3870 if (intel_crtc->config.has_pch_encoder)
3871 intel_set_pch_fifo_underrun_reporting(dev, TRANSCODER_A, false);
3872 intel_disable_pipe(dev_priv, pipe);
3874 intel_ddi_disable_transcoder_func(dev_priv, cpu_transcoder);
3876 ironlake_pfit_disable(intel_crtc);
3878 intel_ddi_disable_pipe_clock(intel_crtc);
3880 for_each_encoder_on_crtc(dev, crtc, encoder)
3881 if (encoder->post_disable)
3882 encoder->post_disable(encoder);
3884 if (intel_crtc->config.has_pch_encoder) {
3885 lpt_disable_pch_transcoder(dev_priv);
3886 intel_set_pch_fifo_underrun_reporting(dev, TRANSCODER_A, true);
3887 intel_ddi_fdi_disable(crtc);
3890 intel_crtc->active = false;
3891 intel_update_watermarks(crtc);
3893 mutex_lock(&dev->struct_mutex);
3894 intel_update_fbc(dev);
3895 mutex_unlock(&dev->struct_mutex);
3898 static void ironlake_crtc_off(struct drm_crtc *crtc)
3900 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3901 intel_put_shared_dpll(intel_crtc);
3904 static void haswell_crtc_off(struct drm_crtc *crtc)
3906 intel_ddi_put_crtc_pll(crtc);
3909 static void intel_crtc_dpms_overlay(struct intel_crtc *intel_crtc, bool enable)
3911 if (!enable && intel_crtc->overlay) {
3912 struct drm_device *dev = intel_crtc->base.dev;
3913 struct drm_i915_private *dev_priv = dev->dev_private;
3915 mutex_lock(&dev->struct_mutex);
3916 dev_priv->mm.interruptible = false;
3917 (void) intel_overlay_switch_off(intel_crtc->overlay);
3918 dev_priv->mm.interruptible = true;
3919 mutex_unlock(&dev->struct_mutex);
3922 /* Let userspace switch the overlay on again. In most cases userspace
3923 * has to recompute where to put it anyway.
3928 * i9xx_fixup_plane - ugly workaround for G45 to fire up the hardware
3929 * cursor plane briefly if not already running after enabling the display
3931 * This workaround avoids occasional blank screens when self refresh is
3935 g4x_fixup_plane(struct drm_i915_private *dev_priv, enum pipe pipe)
3937 u32 cntl = I915_READ(CURCNTR(pipe));
3939 if ((cntl & CURSOR_MODE) == 0) {
3940 u32 fw_bcl_self = I915_READ(FW_BLC_SELF);
3942 I915_WRITE(FW_BLC_SELF, fw_bcl_self & ~FW_BLC_SELF_EN);
3943 I915_WRITE(CURCNTR(pipe), CURSOR_MODE_64_ARGB_AX);
3944 intel_wait_for_vblank(dev_priv->dev, pipe);
3945 I915_WRITE(CURCNTR(pipe), cntl);
3946 I915_WRITE(CURBASE(pipe), I915_READ(CURBASE(pipe)));
3947 I915_WRITE(FW_BLC_SELF, fw_bcl_self);
3951 static void i9xx_pfit_enable(struct intel_crtc *crtc)
3953 struct drm_device *dev = crtc->base.dev;
3954 struct drm_i915_private *dev_priv = dev->dev_private;
3955 struct intel_crtc_config *pipe_config = &crtc->config;
3957 if (!crtc->config.gmch_pfit.control)
3961 * The panel fitter should only be adjusted whilst the pipe is disabled,
3962 * according to register description and PRM.
3964 WARN_ON(I915_READ(PFIT_CONTROL) & PFIT_ENABLE);
3965 assert_pipe_disabled(dev_priv, crtc->pipe);
3967 I915_WRITE(PFIT_PGM_RATIOS, pipe_config->gmch_pfit.pgm_ratios);
3968 I915_WRITE(PFIT_CONTROL, pipe_config->gmch_pfit.control);
3970 /* Border color in case we don't scale up to the full screen. Black by
3971 * default, change to something else for debugging. */
3972 I915_WRITE(BCLRPAT(crtc->pipe), 0);
3975 int valleyview_get_vco(struct drm_i915_private *dev_priv)
3977 int hpll_freq, vco_freq[] = { 800, 1600, 2000, 2400 };
3979 /* Obtain SKU information */
3980 mutex_lock(&dev_priv->dpio_lock);
3981 hpll_freq = vlv_cck_read(dev_priv, CCK_FUSE_REG) &
3982 CCK_FUSE_HPLL_FREQ_MASK;
3983 mutex_unlock(&dev_priv->dpio_lock);
3985 return vco_freq[hpll_freq];
3988 /* Adjust CDclk dividers to allow high res or save power if possible */
3989 static void valleyview_set_cdclk(struct drm_device *dev, int cdclk)
3991 struct drm_i915_private *dev_priv = dev->dev_private;
3994 if (cdclk >= 320) /* jump to highest voltage for 400MHz too */
3996 else if (cdclk == 266)
4001 mutex_lock(&dev_priv->rps.hw_lock);
4002 val = vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ);
4003 val &= ~DSPFREQGUAR_MASK;
4004 val |= (cmd << DSPFREQGUAR_SHIFT);
4005 vlv_punit_write(dev_priv, PUNIT_REG_DSPFREQ, val);
4006 if (wait_for((vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ) &
4007 DSPFREQSTAT_MASK) == (cmd << DSPFREQSTAT_SHIFT),
4009 DRM_ERROR("timed out waiting for CDclk change\n");
4011 mutex_unlock(&dev_priv->rps.hw_lock);
4016 vco = valleyview_get_vco(dev_priv);
4017 divider = ((vco << 1) / cdclk) - 1;
4019 mutex_lock(&dev_priv->dpio_lock);
4020 /* adjust cdclk divider */
4021 val = vlv_cck_read(dev_priv, CCK_DISPLAY_CLOCK_CONTROL);
4024 vlv_cck_write(dev_priv, CCK_DISPLAY_CLOCK_CONTROL, val);
4025 mutex_unlock(&dev_priv->dpio_lock);
4028 mutex_lock(&dev_priv->dpio_lock);
4029 /* adjust self-refresh exit latency value */
4030 val = vlv_bunit_read(dev_priv, BUNIT_REG_BISOC);
4034 * For high bandwidth configs, we set a higher latency in the bunit
4035 * so that the core display fetch happens in time to avoid underruns.
4038 val |= 4500 / 250; /* 4.5 usec */
4040 val |= 3000 / 250; /* 3.0 usec */
4041 vlv_bunit_write(dev_priv, BUNIT_REG_BISOC, val);
4042 mutex_unlock(&dev_priv->dpio_lock);
4044 /* Since we changed the CDclk, we need to update the GMBUSFREQ too */
4045 intel_i2c_reset(dev);
4048 static int valleyview_cur_cdclk(struct drm_i915_private *dev_priv)
4053 vco = valleyview_get_vco(dev_priv);
4055 mutex_lock(&dev_priv->dpio_lock);
4056 divider = vlv_cck_read(dev_priv, CCK_DISPLAY_CLOCK_CONTROL);
4057 mutex_unlock(&dev_priv->dpio_lock);
4061 cur_cdclk = (vco << 1) / (divider + 1);
4066 static int valleyview_calc_cdclk(struct drm_i915_private *dev_priv,
4071 cur_cdclk = valleyview_cur_cdclk(dev_priv);
4074 * Really only a few cases to deal with, as only 4 CDclks are supported:
4079 * So we check to see whether we're above 90% of the lower bin and
4082 if (max_pixclk > 288000) {
4084 } else if (max_pixclk > 240000) {
4088 /* Looks like the 200MHz CDclk freq doesn't work on some configs */
4091 /* compute the max pixel clock for new configuration */
4092 static int intel_mode_max_pixclk(struct drm_i915_private *dev_priv)
4094 struct drm_device *dev = dev_priv->dev;
4095 struct intel_crtc *intel_crtc;
4098 list_for_each_entry(intel_crtc, &dev->mode_config.crtc_list,
4100 if (intel_crtc->new_enabled)
4101 max_pixclk = max(max_pixclk,
4102 intel_crtc->new_config->adjusted_mode.crtc_clock);
4108 static void valleyview_modeset_global_pipes(struct drm_device *dev,
4109 unsigned *prepare_pipes)
4111 struct drm_i915_private *dev_priv = dev->dev_private;
4112 struct intel_crtc *intel_crtc;
4113 int max_pixclk = intel_mode_max_pixclk(dev_priv);
4114 int cur_cdclk = valleyview_cur_cdclk(dev_priv);
4116 if (valleyview_calc_cdclk(dev_priv, max_pixclk) == cur_cdclk)
4119 /* disable/enable all currently active pipes while we change cdclk */
4120 list_for_each_entry(intel_crtc, &dev->mode_config.crtc_list,
4122 if (intel_crtc->base.enabled)
4123 *prepare_pipes |= (1 << intel_crtc->pipe);
4126 static void valleyview_modeset_global_resources(struct drm_device *dev)
4128 struct drm_i915_private *dev_priv = dev->dev_private;
4129 int max_pixclk = intel_mode_max_pixclk(dev_priv);
4130 int cur_cdclk = valleyview_cur_cdclk(dev_priv);
4131 int req_cdclk = valleyview_calc_cdclk(dev_priv, max_pixclk);
4133 if (req_cdclk != cur_cdclk)
4134 valleyview_set_cdclk(dev, req_cdclk);
4137 static void valleyview_crtc_enable(struct drm_crtc *crtc)
4139 struct drm_device *dev = crtc->dev;
4140 struct drm_i915_private *dev_priv = dev->dev_private;
4141 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
4142 struct intel_encoder *encoder;
4143 int pipe = intel_crtc->pipe;
4144 int plane = intel_crtc->plane;
4147 WARN_ON(!crtc->enabled);
4149 if (intel_crtc->active)
4152 intel_crtc->active = true;
4154 for_each_encoder_on_crtc(dev, crtc, encoder)
4155 if (encoder->pre_pll_enable)
4156 encoder->pre_pll_enable(encoder);
4158 is_dsi = intel_pipe_has_type(crtc, INTEL_OUTPUT_DSI);
4161 vlv_enable_pll(intel_crtc);
4163 for_each_encoder_on_crtc(dev, crtc, encoder)
4164 if (encoder->pre_enable)
4165 encoder->pre_enable(encoder);
4167 i9xx_pfit_enable(intel_crtc);
4169 intel_crtc_load_lut(crtc);
4171 intel_update_watermarks(crtc);
4172 intel_enable_pipe(dev_priv, pipe, false, is_dsi);
4173 intel_set_cpu_fifo_underrun_reporting(dev, pipe, true);
4174 intel_enable_primary_plane(dev_priv, plane, pipe);
4175 intel_enable_planes(crtc);
4176 intel_crtc_update_cursor(crtc, true);
4178 intel_update_fbc(dev);
4180 for_each_encoder_on_crtc(dev, crtc, encoder)
4181 encoder->enable(encoder);
4184 static void i9xx_crtc_enable(struct drm_crtc *crtc)
4186 struct drm_device *dev = crtc->dev;
4187 struct drm_i915_private *dev_priv = dev->dev_private;
4188 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
4189 struct intel_encoder *encoder;
4190 int pipe = intel_crtc->pipe;
4191 int plane = intel_crtc->plane;
4193 WARN_ON(!crtc->enabled);
4195 if (intel_crtc->active)
4198 intel_crtc->active = true;
4200 for_each_encoder_on_crtc(dev, crtc, encoder)
4201 if (encoder->pre_enable)
4202 encoder->pre_enable(encoder);
4204 i9xx_enable_pll(intel_crtc);
4206 i9xx_pfit_enable(intel_crtc);
4208 intel_crtc_load_lut(crtc);
4210 intel_update_watermarks(crtc);
4211 intel_enable_pipe(dev_priv, pipe, false, false);
4212 intel_set_cpu_fifo_underrun_reporting(dev, pipe, true);
4213 intel_enable_primary_plane(dev_priv, plane, pipe);
4214 intel_enable_planes(crtc);
4215 /* The fixup needs to happen before cursor is enabled */
4217 g4x_fixup_plane(dev_priv, pipe);
4218 intel_crtc_update_cursor(crtc, true);
4220 /* Give the overlay scaler a chance to enable if it's on this pipe */
4221 intel_crtc_dpms_overlay(intel_crtc, true);
4223 intel_update_fbc(dev);
4225 for_each_encoder_on_crtc(dev, crtc, encoder)
4226 encoder->enable(encoder);
4229 static void i9xx_pfit_disable(struct intel_crtc *crtc)
4231 struct drm_device *dev = crtc->base.dev;
4232 struct drm_i915_private *dev_priv = dev->dev_private;
4234 if (!crtc->config.gmch_pfit.control)
4237 assert_pipe_disabled(dev_priv, crtc->pipe);
4239 DRM_DEBUG_DRIVER("disabling pfit, current: 0x%08x\n",
4240 I915_READ(PFIT_CONTROL));
4241 I915_WRITE(PFIT_CONTROL, 0);
4244 static void i9xx_crtc_disable(struct drm_crtc *crtc)
4246 struct drm_device *dev = crtc->dev;
4247 struct drm_i915_private *dev_priv = dev->dev_private;
4248 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
4249 struct intel_encoder *encoder;
4250 int pipe = intel_crtc->pipe;
4251 int plane = intel_crtc->plane;
4253 if (!intel_crtc->active)
4256 for_each_encoder_on_crtc(dev, crtc, encoder)
4257 encoder->disable(encoder);
4259 /* Give the overlay scaler a chance to disable if it's on this pipe */
4260 intel_crtc_wait_for_pending_flips(crtc);
4261 drm_vblank_off(dev, pipe);
4263 if (dev_priv->fbc.plane == plane)
4264 intel_disable_fbc(dev);
4266 intel_crtc_dpms_overlay(intel_crtc, false);
4267 intel_crtc_update_cursor(crtc, false);
4268 intel_disable_planes(crtc);
4269 intel_disable_primary_plane(dev_priv, plane, pipe);
4271 intel_set_cpu_fifo_underrun_reporting(dev, pipe, false);
4272 intel_disable_pipe(dev_priv, pipe);
4274 i9xx_pfit_disable(intel_crtc);
4276 for_each_encoder_on_crtc(dev, crtc, encoder)
4277 if (encoder->post_disable)
4278 encoder->post_disable(encoder);
4280 if (IS_VALLEYVIEW(dev) && !intel_pipe_has_type(crtc, INTEL_OUTPUT_DSI))
4281 vlv_disable_pll(dev_priv, pipe);
4282 else if (!IS_VALLEYVIEW(dev))
4283 i9xx_disable_pll(dev_priv, pipe);
4285 intel_crtc->active = false;
4286 intel_update_watermarks(crtc);
4288 intel_update_fbc(dev);
4291 static void i9xx_crtc_off(struct drm_crtc *crtc)
4295 static void intel_crtc_update_sarea(struct drm_crtc *crtc,
4298 struct drm_device *dev = crtc->dev;
4299 struct drm_i915_master_private *master_priv;
4300 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
4301 int pipe = intel_crtc->pipe;
4303 if (!dev->primary->master)
4306 master_priv = dev->primary->master->driver_priv;
4307 if (!master_priv->sarea_priv)
4312 master_priv->sarea_priv->pipeA_w = enabled ? crtc->mode.hdisplay : 0;
4313 master_priv->sarea_priv->pipeA_h = enabled ? crtc->mode.vdisplay : 0;
4316 master_priv->sarea_priv->pipeB_w = enabled ? crtc->mode.hdisplay : 0;
4317 master_priv->sarea_priv->pipeB_h = enabled ? crtc->mode.vdisplay : 0;
4320 DRM_ERROR("Can't update pipe %c in SAREA\n", pipe_name(pipe));
4326 * Sets the power management mode of the pipe and plane.
4328 void intel_crtc_update_dpms(struct drm_crtc *crtc)
4330 struct drm_device *dev = crtc->dev;
4331 struct drm_i915_private *dev_priv = dev->dev_private;
4332 struct intel_encoder *intel_encoder;
4333 bool enable = false;
4335 for_each_encoder_on_crtc(dev, crtc, intel_encoder)
4336 enable |= intel_encoder->connectors_active;
4339 dev_priv->display.crtc_enable(crtc);
4341 dev_priv->display.crtc_disable(crtc);
4343 intel_crtc_update_sarea(crtc, enable);
4346 static void intel_crtc_disable(struct drm_crtc *crtc)
4348 struct drm_device *dev = crtc->dev;
4349 struct drm_connector *connector;
4350 struct drm_i915_private *dev_priv = dev->dev_private;
4351 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
4353 /* crtc should still be enabled when we disable it. */
4354 WARN_ON(!crtc->enabled);
4356 dev_priv->display.crtc_disable(crtc);
4357 intel_crtc->eld_vld = false;
4358 intel_crtc_update_sarea(crtc, false);
4359 dev_priv->display.off(crtc);
4361 assert_plane_disabled(dev->dev_private, to_intel_crtc(crtc)->plane);
4362 assert_cursor_disabled(dev_priv, to_intel_crtc(crtc)->pipe);
4363 assert_pipe_disabled(dev->dev_private, to_intel_crtc(crtc)->pipe);
4366 mutex_lock(&dev->struct_mutex);
4367 intel_unpin_fb_obj(to_intel_framebuffer(crtc->fb)->obj);
4368 mutex_unlock(&dev->struct_mutex);
4372 /* Update computed state. */
4373 list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
4374 if (!connector->encoder || !connector->encoder->crtc)
4377 if (connector->encoder->crtc != crtc)
4380 connector->dpms = DRM_MODE_DPMS_OFF;
4381 to_intel_encoder(connector->encoder)->connectors_active = false;
4385 void intel_encoder_destroy(struct drm_encoder *encoder)
4387 struct intel_encoder *intel_encoder = to_intel_encoder(encoder);
4389 drm_encoder_cleanup(encoder);
4390 kfree(intel_encoder);
4393 /* Simple dpms helper for encoders with just one connector, no cloning and only
4394 * one kind of off state. It clamps all !ON modes to fully OFF and changes the
4395 * state of the entire output pipe. */
4396 static void intel_encoder_dpms(struct intel_encoder *encoder, int mode)
4398 if (mode == DRM_MODE_DPMS_ON) {
4399 encoder->connectors_active = true;
4401 intel_crtc_update_dpms(encoder->base.crtc);
4403 encoder->connectors_active = false;
4405 intel_crtc_update_dpms(encoder->base.crtc);
4409 /* Cross check the actual hw state with our own modeset state tracking (and it's
4410 * internal consistency). */
4411 static void intel_connector_check_state(struct intel_connector *connector)
4413 if (connector->get_hw_state(connector)) {
4414 struct intel_encoder *encoder = connector->encoder;
4415 struct drm_crtc *crtc;
4416 bool encoder_enabled;
4419 DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n",
4420 connector->base.base.id,
4421 drm_get_connector_name(&connector->base));
4423 WARN(connector->base.dpms == DRM_MODE_DPMS_OFF,
4424 "wrong connector dpms state\n");
4425 WARN(connector->base.encoder != &encoder->base,
4426 "active connector not linked to encoder\n");
4427 WARN(!encoder->connectors_active,
4428 "encoder->connectors_active not set\n");
4430 encoder_enabled = encoder->get_hw_state(encoder, &pipe);
4431 WARN(!encoder_enabled, "encoder not enabled\n");
4432 if (WARN_ON(!encoder->base.crtc))
4435 crtc = encoder->base.crtc;
4437 WARN(!crtc->enabled, "crtc not enabled\n");
4438 WARN(!to_intel_crtc(crtc)->active, "crtc not active\n");
4439 WARN(pipe != to_intel_crtc(crtc)->pipe,
4440 "encoder active on the wrong pipe\n");
4444 /* Even simpler default implementation, if there's really no special case to
4446 void intel_connector_dpms(struct drm_connector *connector, int mode)
4448 /* All the simple cases only support two dpms states. */
4449 if (mode != DRM_MODE_DPMS_ON)
4450 mode = DRM_MODE_DPMS_OFF;
4452 if (mode == connector->dpms)
4455 connector->dpms = mode;
4457 /* Only need to change hw state when actually enabled */
4458 if (connector->encoder)
4459 intel_encoder_dpms(to_intel_encoder(connector->encoder), mode);
4461 intel_modeset_check_state(connector->dev);
4464 /* Simple connector->get_hw_state implementation for encoders that support only
4465 * one connector and no cloning and hence the encoder state determines the state
4466 * of the connector. */
4467 bool intel_connector_get_hw_state(struct intel_connector *connector)
4470 struct intel_encoder *encoder = connector->encoder;
4472 return encoder->get_hw_state(encoder, &pipe);
4475 static bool ironlake_check_fdi_lanes(struct drm_device *dev, enum pipe pipe,
4476 struct intel_crtc_config *pipe_config)
4478 struct drm_i915_private *dev_priv = dev->dev_private;
4479 struct intel_crtc *pipe_B_crtc =
4480 to_intel_crtc(dev_priv->pipe_to_crtc_mapping[PIPE_B]);
4482 DRM_DEBUG_KMS("checking fdi config on pipe %c, lanes %i\n",
4483 pipe_name(pipe), pipe_config->fdi_lanes);
4484 if (pipe_config->fdi_lanes > 4) {
4485 DRM_DEBUG_KMS("invalid fdi lane config on pipe %c: %i lanes\n",
4486 pipe_name(pipe), pipe_config->fdi_lanes);
4490 if (IS_HASWELL(dev) || IS_BROADWELL(dev)) {
4491 if (pipe_config->fdi_lanes > 2) {
4492 DRM_DEBUG_KMS("only 2 lanes on haswell, required: %i lanes\n",
4493 pipe_config->fdi_lanes);
4500 if (INTEL_INFO(dev)->num_pipes == 2)
4503 /* Ivybridge 3 pipe is really complicated */
4508 if (dev_priv->pipe_to_crtc_mapping[PIPE_C]->enabled &&
4509 pipe_config->fdi_lanes > 2) {
4510 DRM_DEBUG_KMS("invalid shared fdi lane config on pipe %c: %i lanes\n",
4511 pipe_name(pipe), pipe_config->fdi_lanes);
4516 if (!pipe_has_enabled_pch(pipe_B_crtc) ||
4517 pipe_B_crtc->config.fdi_lanes <= 2) {
4518 if (pipe_config->fdi_lanes > 2) {
4519 DRM_DEBUG_KMS("invalid shared fdi lane config on pipe %c: %i lanes\n",
4520 pipe_name(pipe), pipe_config->fdi_lanes);
4524 DRM_DEBUG_KMS("fdi link B uses too many lanes to enable link C\n");
4534 static int ironlake_fdi_compute_config(struct intel_crtc *intel_crtc,
4535 struct intel_crtc_config *pipe_config)
4537 struct drm_device *dev = intel_crtc->base.dev;
4538 struct drm_display_mode *adjusted_mode = &pipe_config->adjusted_mode;
4539 int lane, link_bw, fdi_dotclock;
4540 bool setup_ok, needs_recompute = false;
4543 /* FDI is a binary signal running at ~2.7GHz, encoding
4544 * each output octet as 10 bits. The actual frequency
4545 * is stored as a divider into a 100MHz clock, and the
4546 * mode pixel clock is stored in units of 1KHz.
4547 * Hence the bw of each lane in terms of the mode signal
4550 link_bw = intel_fdi_link_freq(dev) * MHz(100)/KHz(1)/10;
4552 fdi_dotclock = adjusted_mode->crtc_clock;
4554 lane = ironlake_get_lanes_required(fdi_dotclock, link_bw,
4555 pipe_config->pipe_bpp);
4557 pipe_config->fdi_lanes = lane;
4559 intel_link_compute_m_n(pipe_config->pipe_bpp, lane, fdi_dotclock,
4560 link_bw, &pipe_config->fdi_m_n);
4562 setup_ok = ironlake_check_fdi_lanes(intel_crtc->base.dev,
4563 intel_crtc->pipe, pipe_config);
4564 if (!setup_ok && pipe_config->pipe_bpp > 6*3) {
4565 pipe_config->pipe_bpp -= 2*3;
4566 DRM_DEBUG_KMS("fdi link bw constraint, reducing pipe bpp to %i\n",
4567 pipe_config->pipe_bpp);
4568 needs_recompute = true;
4569 pipe_config->bw_constrained = true;
4574 if (needs_recompute)
4577 return setup_ok ? 0 : -EINVAL;
4580 static void hsw_compute_ips_config(struct intel_crtc *crtc,
4581 struct intel_crtc_config *pipe_config)
4583 pipe_config->ips_enabled = i915.enable_ips &&
4584 hsw_crtc_supports_ips(crtc) &&
4585 pipe_config->pipe_bpp <= 24;
4588 static int intel_crtc_compute_config(struct intel_crtc *crtc,
4589 struct intel_crtc_config *pipe_config)
4591 struct drm_device *dev = crtc->base.dev;
4592 struct drm_display_mode *adjusted_mode = &pipe_config->adjusted_mode;
4594 /* FIXME should check pixel clock limits on all platforms */
4595 if (INTEL_INFO(dev)->gen < 4) {
4596 struct drm_i915_private *dev_priv = dev->dev_private;
4598 dev_priv->display.get_display_clock_speed(dev);
4601 * Enable pixel doubling when the dot clock
4602 * is > 90% of the (display) core speed.
4604 * GDG double wide on either pipe,
4605 * otherwise pipe A only.
4607 if ((crtc->pipe == PIPE_A || IS_I915G(dev)) &&
4608 adjusted_mode->crtc_clock > clock_limit * 9 / 10) {
4610 pipe_config->double_wide = true;
4613 if (adjusted_mode->crtc_clock > clock_limit * 9 / 10)
4618 * Pipe horizontal size must be even in:
4620 * - LVDS dual channel mode
4621 * - Double wide pipe
4623 if ((intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_LVDS) &&
4624 intel_is_dual_link_lvds(dev)) || pipe_config->double_wide)
4625 pipe_config->pipe_src_w &= ~1;
4627 /* Cantiga+ cannot handle modes with a hsync front porch of 0.
4628 * WaPruneModeWithIncorrectHsyncOffset:ctg,elk,ilk,snb,ivb,vlv,hsw.
4630 if ((INTEL_INFO(dev)->gen > 4 || IS_G4X(dev)) &&
4631 adjusted_mode->hsync_start == adjusted_mode->hdisplay)
4634 if ((IS_G4X(dev) || IS_VALLEYVIEW(dev)) && pipe_config->pipe_bpp > 10*3) {
4635 pipe_config->pipe_bpp = 10*3; /* 12bpc is gen5+ */
4636 } else if (INTEL_INFO(dev)->gen <= 4 && pipe_config->pipe_bpp > 8*3) {
4637 /* only a 8bpc pipe, with 6bpc dither through the panel fitter
4639 pipe_config->pipe_bpp = 8*3;
4643 hsw_compute_ips_config(crtc, pipe_config);
4645 /* XXX: PCH clock sharing is done in ->mode_set, so make sure the old
4646 * clock survives for now. */
4647 if (HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev))
4648 pipe_config->shared_dpll = crtc->config.shared_dpll;
4650 if (pipe_config->has_pch_encoder)
4651 return ironlake_fdi_compute_config(crtc, pipe_config);
4656 static int valleyview_get_display_clock_speed(struct drm_device *dev)
4658 return 400000; /* FIXME */
4661 static int i945_get_display_clock_speed(struct drm_device *dev)
4666 static int i915_get_display_clock_speed(struct drm_device *dev)
4671 static int i9xx_misc_get_display_clock_speed(struct drm_device *dev)
4676 static int pnv_get_display_clock_speed(struct drm_device *dev)
4680 pci_read_config_word(dev->pdev, GCFGC, &gcfgc);
4682 switch (gcfgc & GC_DISPLAY_CLOCK_MASK) {
4683 case GC_DISPLAY_CLOCK_267_MHZ_PNV:
4685 case GC_DISPLAY_CLOCK_333_MHZ_PNV:
4687 case GC_DISPLAY_CLOCK_444_MHZ_PNV:
4689 case GC_DISPLAY_CLOCK_200_MHZ_PNV:
4692 DRM_ERROR("Unknown pnv display core clock 0x%04x\n", gcfgc);
4693 case GC_DISPLAY_CLOCK_133_MHZ_PNV:
4695 case GC_DISPLAY_CLOCK_167_MHZ_PNV:
4700 static int i915gm_get_display_clock_speed(struct drm_device *dev)
4704 pci_read_config_word(dev->pdev, GCFGC, &gcfgc);
4706 if (gcfgc & GC_LOW_FREQUENCY_ENABLE)
4709 switch (gcfgc & GC_DISPLAY_CLOCK_MASK) {
4710 case GC_DISPLAY_CLOCK_333_MHZ:
4713 case GC_DISPLAY_CLOCK_190_200_MHZ:
4719 static int i865_get_display_clock_speed(struct drm_device *dev)
4724 static int i855_get_display_clock_speed(struct drm_device *dev)
4727 /* Assume that the hardware is in the high speed state. This
4728 * should be the default.
4730 switch (hpllcc & GC_CLOCK_CONTROL_MASK) {
4731 case GC_CLOCK_133_200:
4732 case GC_CLOCK_100_200:
4734 case GC_CLOCK_166_250:
4736 case GC_CLOCK_100_133:
4740 /* Shouldn't happen */
4744 static int i830_get_display_clock_speed(struct drm_device *dev)
4750 intel_reduce_m_n_ratio(uint32_t *num, uint32_t *den)
4752 while (*num > DATA_LINK_M_N_MASK ||
4753 *den > DATA_LINK_M_N_MASK) {
4759 static void compute_m_n(unsigned int m, unsigned int n,
4760 uint32_t *ret_m, uint32_t *ret_n)
4762 *ret_n = min_t(unsigned int, roundup_pow_of_two(n), DATA_LINK_N_MAX);
4763 *ret_m = div_u64((uint64_t) m * *ret_n, n);
4764 intel_reduce_m_n_ratio(ret_m, ret_n);
4768 intel_link_compute_m_n(int bits_per_pixel, int nlanes,
4769 int pixel_clock, int link_clock,
4770 struct intel_link_m_n *m_n)
4774 compute_m_n(bits_per_pixel * pixel_clock,
4775 link_clock * nlanes * 8,
4776 &m_n->gmch_m, &m_n->gmch_n);
4778 compute_m_n(pixel_clock, link_clock,
4779 &m_n->link_m, &m_n->link_n);
4782 static inline bool intel_panel_use_ssc(struct drm_i915_private *dev_priv)
4784 if (i915.panel_use_ssc >= 0)
4785 return i915.panel_use_ssc != 0;
4786 return dev_priv->vbt.lvds_use_ssc
4787 && !(dev_priv->quirks & QUIRK_LVDS_SSC_DISABLE);
4790 static int i9xx_get_refclk(struct drm_crtc *crtc, int num_connectors)
4792 struct drm_device *dev = crtc->dev;
4793 struct drm_i915_private *dev_priv = dev->dev_private;
4796 if (IS_VALLEYVIEW(dev)) {
4798 } else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) &&
4799 intel_panel_use_ssc(dev_priv) && num_connectors < 2) {
4800 refclk = dev_priv->vbt.lvds_ssc_freq;
4801 DRM_DEBUG_KMS("using SSC reference clock of %d kHz\n", refclk);
4802 } else if (!IS_GEN2(dev)) {
4811 static uint32_t pnv_dpll_compute_fp(struct dpll *dpll)
4813 return (1 << dpll->n) << 16 | dpll->m2;
4816 static uint32_t i9xx_dpll_compute_fp(struct dpll *dpll)
4818 return dpll->n << 16 | dpll->m1 << 8 | dpll->m2;
4821 static void i9xx_update_pll_dividers(struct intel_crtc *crtc,
4822 intel_clock_t *reduced_clock)
4824 struct drm_device *dev = crtc->base.dev;
4825 struct drm_i915_private *dev_priv = dev->dev_private;
4826 int pipe = crtc->pipe;
4829 if (IS_PINEVIEW(dev)) {
4830 fp = pnv_dpll_compute_fp(&crtc->config.dpll);
4832 fp2 = pnv_dpll_compute_fp(reduced_clock);
4834 fp = i9xx_dpll_compute_fp(&crtc->config.dpll);
4836 fp2 = i9xx_dpll_compute_fp(reduced_clock);
4839 I915_WRITE(FP0(pipe), fp);
4840 crtc->config.dpll_hw_state.fp0 = fp;
4842 crtc->lowfreq_avail = false;
4843 if (intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_LVDS) &&
4844 reduced_clock && i915.powersave) {
4845 I915_WRITE(FP1(pipe), fp2);
4846 crtc->config.dpll_hw_state.fp1 = fp2;
4847 crtc->lowfreq_avail = true;
4849 I915_WRITE(FP1(pipe), fp);
4850 crtc->config.dpll_hw_state.fp1 = fp;
4854 static void vlv_pllb_recal_opamp(struct drm_i915_private *dev_priv, enum pipe
4860 * PLLB opamp always calibrates to max value of 0x3f, force enable it
4861 * and set it to a reasonable value instead.
4863 reg_val = vlv_dpio_read(dev_priv, pipe, VLV_PLL_DW9(1));
4864 reg_val &= 0xffffff00;
4865 reg_val |= 0x00000030;
4866 vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW9(1), reg_val);
4868 reg_val = vlv_dpio_read(dev_priv, pipe, VLV_REF_DW13);
4869 reg_val &= 0x8cffffff;
4870 reg_val = 0x8c000000;
4871 vlv_dpio_write(dev_priv, pipe, VLV_REF_DW13, reg_val);
4873 reg_val = vlv_dpio_read(dev_priv, pipe, VLV_PLL_DW9(1));
4874 reg_val &= 0xffffff00;
4875 vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW9(1), reg_val);
4877 reg_val = vlv_dpio_read(dev_priv, pipe, VLV_REF_DW13);
4878 reg_val &= 0x00ffffff;
4879 reg_val |= 0xb0000000;
4880 vlv_dpio_write(dev_priv, pipe, VLV_REF_DW13, reg_val);
4883 static void intel_pch_transcoder_set_m_n(struct intel_crtc *crtc,
4884 struct intel_link_m_n *m_n)
4886 struct drm_device *dev = crtc->base.dev;
4887 struct drm_i915_private *dev_priv = dev->dev_private;
4888 int pipe = crtc->pipe;
4890 I915_WRITE(PCH_TRANS_DATA_M1(pipe), TU_SIZE(m_n->tu) | m_n->gmch_m);
4891 I915_WRITE(PCH_TRANS_DATA_N1(pipe), m_n->gmch_n);
4892 I915_WRITE(PCH_TRANS_LINK_M1(pipe), m_n->link_m);
4893 I915_WRITE(PCH_TRANS_LINK_N1(pipe), m_n->link_n);
4896 static void intel_cpu_transcoder_set_m_n(struct intel_crtc *crtc,
4897 struct intel_link_m_n *m_n)
4899 struct drm_device *dev = crtc->base.dev;
4900 struct drm_i915_private *dev_priv = dev->dev_private;
4901 int pipe = crtc->pipe;
4902 enum transcoder transcoder = crtc->config.cpu_transcoder;
4904 if (INTEL_INFO(dev)->gen >= 5) {
4905 I915_WRITE(PIPE_DATA_M1(transcoder), TU_SIZE(m_n->tu) | m_n->gmch_m);
4906 I915_WRITE(PIPE_DATA_N1(transcoder), m_n->gmch_n);
4907 I915_WRITE(PIPE_LINK_M1(transcoder), m_n->link_m);
4908 I915_WRITE(PIPE_LINK_N1(transcoder), m_n->link_n);
4910 I915_WRITE(PIPE_DATA_M_G4X(pipe), TU_SIZE(m_n->tu) | m_n->gmch_m);
4911 I915_WRITE(PIPE_DATA_N_G4X(pipe), m_n->gmch_n);
4912 I915_WRITE(PIPE_LINK_M_G4X(pipe), m_n->link_m);
4913 I915_WRITE(PIPE_LINK_N_G4X(pipe), m_n->link_n);
4917 static void intel_dp_set_m_n(struct intel_crtc *crtc)
4919 if (crtc->config.has_pch_encoder)
4920 intel_pch_transcoder_set_m_n(crtc, &crtc->config.dp_m_n);
4922 intel_cpu_transcoder_set_m_n(crtc, &crtc->config.dp_m_n);
4925 static void vlv_update_pll(struct intel_crtc *crtc)
4927 struct drm_device *dev = crtc->base.dev;
4928 struct drm_i915_private *dev_priv = dev->dev_private;
4929 int pipe = crtc->pipe;
4931 u32 bestn, bestm1, bestm2, bestp1, bestp2;
4932 u32 coreclk, reg_val, dpll_md;
4934 mutex_lock(&dev_priv->dpio_lock);
4936 bestn = crtc->config.dpll.n;
4937 bestm1 = crtc->config.dpll.m1;
4938 bestm2 = crtc->config.dpll.m2;
4939 bestp1 = crtc->config.dpll.p1;
4940 bestp2 = crtc->config.dpll.p2;
4942 /* See eDP HDMI DPIO driver vbios notes doc */
4944 /* PLL B needs special handling */
4946 vlv_pllb_recal_opamp(dev_priv, pipe);
4948 /* Set up Tx target for periodic Rcomp update */
4949 vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW9_BCAST, 0x0100000f);
4951 /* Disable target IRef on PLL */
4952 reg_val = vlv_dpio_read(dev_priv, pipe, VLV_PLL_DW8(pipe));
4953 reg_val &= 0x00ffffff;
4954 vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW8(pipe), reg_val);
4956 /* Disable fast lock */
4957 vlv_dpio_write(dev_priv, pipe, VLV_CMN_DW0, 0x610);
4959 /* Set idtafcrecal before PLL is enabled */
4960 mdiv = ((bestm1 << DPIO_M1DIV_SHIFT) | (bestm2 & DPIO_M2DIV_MASK));
4961 mdiv |= ((bestp1 << DPIO_P1_SHIFT) | (bestp2 << DPIO_P2_SHIFT));
4962 mdiv |= ((bestn << DPIO_N_SHIFT));
4963 mdiv |= (1 << DPIO_K_SHIFT);
4966 * Post divider depends on pixel clock rate, DAC vs digital (and LVDS,
4967 * but we don't support that).
4968 * Note: don't use the DAC post divider as it seems unstable.
4970 mdiv |= (DPIO_POST_DIV_HDMIDP << DPIO_POST_DIV_SHIFT);
4971 vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW3(pipe), mdiv);
4973 mdiv |= DPIO_ENABLE_CALIBRATION;
4974 vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW3(pipe), mdiv);
4976 /* Set HBR and RBR LPF coefficients */
4977 if (crtc->config.port_clock == 162000 ||
4978 intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_ANALOG) ||
4979 intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_HDMI))
4980 vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW10(pipe),
4983 vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW10(pipe),
4986 if (intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_EDP) ||
4987 intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_DISPLAYPORT)) {
4988 /* Use SSC source */
4990 vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW5(pipe),
4993 vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW5(pipe),
4995 } else { /* HDMI or VGA */
4996 /* Use bend source */
4998 vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW5(pipe),
5001 vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW5(pipe),
5005 coreclk = vlv_dpio_read(dev_priv, pipe, VLV_PLL_DW7(pipe));
5006 coreclk = (coreclk & 0x0000ff00) | 0x01c00000;
5007 if (intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_DISPLAYPORT) ||
5008 intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_EDP))
5009 coreclk |= 0x01000000;
5010 vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW7(pipe), coreclk);
5012 vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW11(pipe), 0x87871000);
5015 * Enable DPIO clock input. We should never disable the reference
5016 * clock for pipe B, since VGA hotplug / manual detection depends
5019 dpll = DPLL_EXT_BUFFER_ENABLE_VLV | DPLL_REFA_CLK_ENABLE_VLV |
5020 DPLL_VGA_MODE_DIS | DPLL_INTEGRATED_CLOCK_VLV;
5021 /* We should never disable this, set it here for state tracking */
5023 dpll |= DPLL_INTEGRATED_CRI_CLK_VLV;
5024 dpll |= DPLL_VCO_ENABLE;
5025 crtc->config.dpll_hw_state.dpll = dpll;
5027 dpll_md = (crtc->config.pixel_multiplier - 1)
5028 << DPLL_MD_UDI_MULTIPLIER_SHIFT;
5029 crtc->config.dpll_hw_state.dpll_md = dpll_md;
5031 if (crtc->config.has_dp_encoder)
5032 intel_dp_set_m_n(crtc);
5034 mutex_unlock(&dev_priv->dpio_lock);
5037 static void i9xx_update_pll(struct intel_crtc *crtc,
5038 intel_clock_t *reduced_clock,
5041 struct drm_device *dev = crtc->base.dev;
5042 struct drm_i915_private *dev_priv = dev->dev_private;
5045 struct dpll *clock = &crtc->config.dpll;
5047 i9xx_update_pll_dividers(crtc, reduced_clock);
5049 is_sdvo = intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_SDVO) ||
5050 intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_HDMI);
5052 dpll = DPLL_VGA_MODE_DIS;
5054 if (intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_LVDS))
5055 dpll |= DPLLB_MODE_LVDS;
5057 dpll |= DPLLB_MODE_DAC_SERIAL;
5059 if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev)) {
5060 dpll |= (crtc->config.pixel_multiplier - 1)
5061 << SDVO_MULTIPLIER_SHIFT_HIRES;
5065 dpll |= DPLL_SDVO_HIGH_SPEED;
5067 if (intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_DISPLAYPORT))
5068 dpll |= DPLL_SDVO_HIGH_SPEED;
5070 /* compute bitmask from p1 value */
5071 if (IS_PINEVIEW(dev))
5072 dpll |= (1 << (clock->p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT_PINEVIEW;
5074 dpll |= (1 << (clock->p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT;
5075 if (IS_G4X(dev) && reduced_clock)
5076 dpll |= (1 << (reduced_clock->p1 - 1)) << DPLL_FPA1_P1_POST_DIV_SHIFT;
5078 switch (clock->p2) {
5080 dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_5;
5083 dpll |= DPLLB_LVDS_P2_CLOCK_DIV_7;
5086 dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_10;
5089 dpll |= DPLLB_LVDS_P2_CLOCK_DIV_14;
5092 if (INTEL_INFO(dev)->gen >= 4)
5093 dpll |= (6 << PLL_LOAD_PULSE_PHASE_SHIFT);
5095 if (crtc->config.sdvo_tv_clock)
5096 dpll |= PLL_REF_INPUT_TVCLKINBC;
5097 else if (intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_LVDS) &&
5098 intel_panel_use_ssc(dev_priv) && num_connectors < 2)
5099 dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN;
5101 dpll |= PLL_REF_INPUT_DREFCLK;
5103 dpll |= DPLL_VCO_ENABLE;
5104 crtc->config.dpll_hw_state.dpll = dpll;
5106 if (INTEL_INFO(dev)->gen >= 4) {
5107 u32 dpll_md = (crtc->config.pixel_multiplier - 1)
5108 << DPLL_MD_UDI_MULTIPLIER_SHIFT;
5109 crtc->config.dpll_hw_state.dpll_md = dpll_md;
5112 if (crtc->config.has_dp_encoder)
5113 intel_dp_set_m_n(crtc);
5116 static void i8xx_update_pll(struct intel_crtc *crtc,
5117 intel_clock_t *reduced_clock,
5120 struct drm_device *dev = crtc->base.dev;
5121 struct drm_i915_private *dev_priv = dev->dev_private;
5123 struct dpll *clock = &crtc->config.dpll;
5125 i9xx_update_pll_dividers(crtc, reduced_clock);
5127 dpll = DPLL_VGA_MODE_DIS;
5129 if (intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_LVDS)) {
5130 dpll |= (1 << (clock->p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT;
5133 dpll |= PLL_P1_DIVIDE_BY_TWO;
5135 dpll |= (clock->p1 - 2) << DPLL_FPA01_P1_POST_DIV_SHIFT;
5137 dpll |= PLL_P2_DIVIDE_BY_4;
5140 if (intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_DVO))
5141 dpll |= DPLL_DVO_2X_MODE;
5143 if (intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_LVDS) &&
5144 intel_panel_use_ssc(dev_priv) && num_connectors < 2)
5145 dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN;
5147 dpll |= PLL_REF_INPUT_DREFCLK;
5149 dpll |= DPLL_VCO_ENABLE;
5150 crtc->config.dpll_hw_state.dpll = dpll;
5153 static void intel_set_pipe_timings(struct intel_crtc *intel_crtc)
5155 struct drm_device *dev = intel_crtc->base.dev;
5156 struct drm_i915_private *dev_priv = dev->dev_private;
5157 enum pipe pipe = intel_crtc->pipe;
5158 enum transcoder cpu_transcoder = intel_crtc->config.cpu_transcoder;
5159 struct drm_display_mode *adjusted_mode =
5160 &intel_crtc->config.adjusted_mode;
5161 uint32_t vsyncshift, crtc_vtotal, crtc_vblank_end;
5163 /* We need to be careful not to changed the adjusted mode, for otherwise
5164 * the hw state checker will get angry at the mismatch. */
5165 crtc_vtotal = adjusted_mode->crtc_vtotal;
5166 crtc_vblank_end = adjusted_mode->crtc_vblank_end;
5168 if (!IS_GEN2(dev) && adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE) {
5169 /* the chip adds 2 halflines automatically */
5171 crtc_vblank_end -= 1;
5172 vsyncshift = adjusted_mode->crtc_hsync_start
5173 - adjusted_mode->crtc_htotal / 2;
5178 if (INTEL_INFO(dev)->gen > 3)
5179 I915_WRITE(VSYNCSHIFT(cpu_transcoder), vsyncshift);
5181 I915_WRITE(HTOTAL(cpu_transcoder),
5182 (adjusted_mode->crtc_hdisplay - 1) |
5183 ((adjusted_mode->crtc_htotal - 1) << 16));
5184 I915_WRITE(HBLANK(cpu_transcoder),
5185 (adjusted_mode->crtc_hblank_start - 1) |
5186 ((adjusted_mode->crtc_hblank_end - 1) << 16));
5187 I915_WRITE(HSYNC(cpu_transcoder),
5188 (adjusted_mode->crtc_hsync_start - 1) |
5189 ((adjusted_mode->crtc_hsync_end - 1) << 16));
5191 I915_WRITE(VTOTAL(cpu_transcoder),
5192 (adjusted_mode->crtc_vdisplay - 1) |
5193 ((crtc_vtotal - 1) << 16));
5194 I915_WRITE(VBLANK(cpu_transcoder),
5195 (adjusted_mode->crtc_vblank_start - 1) |
5196 ((crtc_vblank_end - 1) << 16));
5197 I915_WRITE(VSYNC(cpu_transcoder),
5198 (adjusted_mode->crtc_vsync_start - 1) |
5199 ((adjusted_mode->crtc_vsync_end - 1) << 16));
5201 /* Workaround: when the EDP input selection is B, the VTOTAL_B must be
5202 * programmed with the VTOTAL_EDP value. Same for VTOTAL_C. This is
5203 * documented on the DDI_FUNC_CTL register description, EDP Input Select
5205 if (IS_HASWELL(dev) && cpu_transcoder == TRANSCODER_EDP &&
5206 (pipe == PIPE_B || pipe == PIPE_C))
5207 I915_WRITE(VTOTAL(pipe), I915_READ(VTOTAL(cpu_transcoder)));
5209 /* pipesrc controls the size that is scaled from, which should
5210 * always be the user's requested size.
5212 I915_WRITE(PIPESRC(pipe),
5213 ((intel_crtc->config.pipe_src_w - 1) << 16) |
5214 (intel_crtc->config.pipe_src_h - 1));
5217 static void intel_get_pipe_timings(struct intel_crtc *crtc,
5218 struct intel_crtc_config *pipe_config)
5220 struct drm_device *dev = crtc->base.dev;
5221 struct drm_i915_private *dev_priv = dev->dev_private;
5222 enum transcoder cpu_transcoder = pipe_config->cpu_transcoder;
5225 tmp = I915_READ(HTOTAL(cpu_transcoder));
5226 pipe_config->adjusted_mode.crtc_hdisplay = (tmp & 0xffff) + 1;
5227 pipe_config->adjusted_mode.crtc_htotal = ((tmp >> 16) & 0xffff) + 1;
5228 tmp = I915_READ(HBLANK(cpu_transcoder));
5229 pipe_config->adjusted_mode.crtc_hblank_start = (tmp & 0xffff) + 1;
5230 pipe_config->adjusted_mode.crtc_hblank_end = ((tmp >> 16) & 0xffff) + 1;
5231 tmp = I915_READ(HSYNC(cpu_transcoder));
5232 pipe_config->adjusted_mode.crtc_hsync_start = (tmp & 0xffff) + 1;
5233 pipe_config->adjusted_mode.crtc_hsync_end = ((tmp >> 16) & 0xffff) + 1;
5235 tmp = I915_READ(VTOTAL(cpu_transcoder));
5236 pipe_config->adjusted_mode.crtc_vdisplay = (tmp & 0xffff) + 1;
5237 pipe_config->adjusted_mode.crtc_vtotal = ((tmp >> 16) & 0xffff) + 1;
5238 tmp = I915_READ(VBLANK(cpu_transcoder));
5239 pipe_config->adjusted_mode.crtc_vblank_start = (tmp & 0xffff) + 1;
5240 pipe_config->adjusted_mode.crtc_vblank_end = ((tmp >> 16) & 0xffff) + 1;
5241 tmp = I915_READ(VSYNC(cpu_transcoder));
5242 pipe_config->adjusted_mode.crtc_vsync_start = (tmp & 0xffff) + 1;
5243 pipe_config->adjusted_mode.crtc_vsync_end = ((tmp >> 16) & 0xffff) + 1;
5245 if (I915_READ(PIPECONF(cpu_transcoder)) & PIPECONF_INTERLACE_MASK) {
5246 pipe_config->adjusted_mode.flags |= DRM_MODE_FLAG_INTERLACE;
5247 pipe_config->adjusted_mode.crtc_vtotal += 1;
5248 pipe_config->adjusted_mode.crtc_vblank_end += 1;
5251 tmp = I915_READ(PIPESRC(crtc->pipe));
5252 pipe_config->pipe_src_h = (tmp & 0xffff) + 1;
5253 pipe_config->pipe_src_w = ((tmp >> 16) & 0xffff) + 1;
5255 pipe_config->requested_mode.vdisplay = pipe_config->pipe_src_h;
5256 pipe_config->requested_mode.hdisplay = pipe_config->pipe_src_w;
5259 static void intel_crtc_mode_from_pipe_config(struct intel_crtc *intel_crtc,
5260 struct intel_crtc_config *pipe_config)
5262 struct drm_crtc *crtc = &intel_crtc->base;
5264 crtc->mode.hdisplay = pipe_config->adjusted_mode.crtc_hdisplay;
5265 crtc->mode.htotal = pipe_config->adjusted_mode.crtc_htotal;
5266 crtc->mode.hsync_start = pipe_config->adjusted_mode.crtc_hsync_start;
5267 crtc->mode.hsync_end = pipe_config->adjusted_mode.crtc_hsync_end;
5269 crtc->mode.vdisplay = pipe_config->adjusted_mode.crtc_vdisplay;
5270 crtc->mode.vtotal = pipe_config->adjusted_mode.crtc_vtotal;
5271 crtc->mode.vsync_start = pipe_config->adjusted_mode.crtc_vsync_start;
5272 crtc->mode.vsync_end = pipe_config->adjusted_mode.crtc_vsync_end;
5274 crtc->mode.flags = pipe_config->adjusted_mode.flags;
5276 crtc->mode.clock = pipe_config->adjusted_mode.crtc_clock;
5277 crtc->mode.flags |= pipe_config->adjusted_mode.flags;
5280 static void i9xx_set_pipeconf(struct intel_crtc *intel_crtc)
5282 struct drm_device *dev = intel_crtc->base.dev;
5283 struct drm_i915_private *dev_priv = dev->dev_private;
5288 if (dev_priv->quirks & QUIRK_PIPEA_FORCE &&
5289 I915_READ(PIPECONF(intel_crtc->pipe)) & PIPECONF_ENABLE)
5290 pipeconf |= PIPECONF_ENABLE;
5292 if (intel_crtc->config.double_wide)
5293 pipeconf |= PIPECONF_DOUBLE_WIDE;
5295 /* only g4x and later have fancy bpc/dither controls */
5296 if (IS_G4X(dev) || IS_VALLEYVIEW(dev)) {
5297 /* Bspec claims that we can't use dithering for 30bpp pipes. */
5298 if (intel_crtc->config.dither && intel_crtc->config.pipe_bpp != 30)
5299 pipeconf |= PIPECONF_DITHER_EN |
5300 PIPECONF_DITHER_TYPE_SP;
5302 switch (intel_crtc->config.pipe_bpp) {
5304 pipeconf |= PIPECONF_6BPC;
5307 pipeconf |= PIPECONF_8BPC;
5310 pipeconf |= PIPECONF_10BPC;
5313 /* Case prevented by intel_choose_pipe_bpp_dither. */
5318 if (HAS_PIPE_CXSR(dev)) {
5319 if (intel_crtc->lowfreq_avail) {
5320 DRM_DEBUG_KMS("enabling CxSR downclocking\n");
5321 pipeconf |= PIPECONF_CXSR_DOWNCLOCK;
5323 DRM_DEBUG_KMS("disabling CxSR downclocking\n");
5327 if (!IS_GEN2(dev) &&
5328 intel_crtc->config.adjusted_mode.flags & DRM_MODE_FLAG_INTERLACE)
5329 pipeconf |= PIPECONF_INTERLACE_W_FIELD_INDICATION;
5331 pipeconf |= PIPECONF_PROGRESSIVE;
5333 if (IS_VALLEYVIEW(dev) && intel_crtc->config.limited_color_range)
5334 pipeconf |= PIPECONF_COLOR_RANGE_SELECT;
5336 I915_WRITE(PIPECONF(intel_crtc->pipe), pipeconf);
5337 POSTING_READ(PIPECONF(intel_crtc->pipe));
5340 static int i9xx_crtc_mode_set(struct drm_crtc *crtc,
5342 struct drm_framebuffer *fb)
5344 struct drm_device *dev = crtc->dev;
5345 struct drm_i915_private *dev_priv = dev->dev_private;
5346 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
5347 int pipe = intel_crtc->pipe;
5348 int plane = intel_crtc->plane;
5349 int refclk, num_connectors = 0;
5350 intel_clock_t clock, reduced_clock;
5352 bool ok, has_reduced_clock = false;
5353 bool is_lvds = false, is_dsi = false;
5354 struct intel_encoder *encoder;
5355 const intel_limit_t *limit;
5358 for_each_encoder_on_crtc(dev, crtc, encoder) {
5359 switch (encoder->type) {
5360 case INTEL_OUTPUT_LVDS:
5363 case INTEL_OUTPUT_DSI:
5374 if (!intel_crtc->config.clock_set) {
5375 refclk = i9xx_get_refclk(crtc, num_connectors);
5378 * Returns a set of divisors for the desired target clock with
5379 * the given refclk, or FALSE. The returned values represent
5380 * the clock equation: reflck * (5 * (m1 + 2) + (m2 + 2)) / (n +
5383 limit = intel_limit(crtc, refclk);
5384 ok = dev_priv->display.find_dpll(limit, crtc,
5385 intel_crtc->config.port_clock,
5386 refclk, NULL, &clock);
5388 DRM_ERROR("Couldn't find PLL settings for mode!\n");
5392 if (is_lvds && dev_priv->lvds_downclock_avail) {
5394 * Ensure we match the reduced clock's P to the target
5395 * clock. If the clocks don't match, we can't switch
5396 * the display clock by using the FP0/FP1. In such case
5397 * we will disable the LVDS downclock feature.
5400 dev_priv->display.find_dpll(limit, crtc,
5401 dev_priv->lvds_downclock,
5405 /* Compat-code for transition, will disappear. */
5406 intel_crtc->config.dpll.n = clock.n;
5407 intel_crtc->config.dpll.m1 = clock.m1;
5408 intel_crtc->config.dpll.m2 = clock.m2;
5409 intel_crtc->config.dpll.p1 = clock.p1;
5410 intel_crtc->config.dpll.p2 = clock.p2;
5414 i8xx_update_pll(intel_crtc,
5415 has_reduced_clock ? &reduced_clock : NULL,
5417 } else if (IS_VALLEYVIEW(dev)) {
5418 vlv_update_pll(intel_crtc);
5420 i9xx_update_pll(intel_crtc,
5421 has_reduced_clock ? &reduced_clock : NULL,
5426 /* Set up the display plane register */
5427 dspcntr = DISPPLANE_GAMMA_ENABLE;
5429 if (!IS_VALLEYVIEW(dev)) {
5431 dspcntr &= ~DISPPLANE_SEL_PIPE_MASK;
5433 dspcntr |= DISPPLANE_SEL_PIPE_B;
5436 intel_set_pipe_timings(intel_crtc);
5438 /* pipesrc and dspsize control the size that is scaled from,
5439 * which should always be the user's requested size.
5441 I915_WRITE(DSPSIZE(plane),
5442 ((intel_crtc->config.pipe_src_h - 1) << 16) |
5443 (intel_crtc->config.pipe_src_w - 1));
5444 I915_WRITE(DSPPOS(plane), 0);
5446 i9xx_set_pipeconf(intel_crtc);
5448 I915_WRITE(DSPCNTR(plane), dspcntr);
5449 POSTING_READ(DSPCNTR(plane));
5451 ret = intel_pipe_set_base(crtc, x, y, fb);
5456 static void i9xx_get_pfit_config(struct intel_crtc *crtc,
5457 struct intel_crtc_config *pipe_config)
5459 struct drm_device *dev = crtc->base.dev;
5460 struct drm_i915_private *dev_priv = dev->dev_private;
5463 if (INTEL_INFO(dev)->gen <= 3 && (IS_I830(dev) || !IS_MOBILE(dev)))
5466 tmp = I915_READ(PFIT_CONTROL);
5467 if (!(tmp & PFIT_ENABLE))
5470 /* Check whether the pfit is attached to our pipe. */
5471 if (INTEL_INFO(dev)->gen < 4) {
5472 if (crtc->pipe != PIPE_B)
5475 if ((tmp & PFIT_PIPE_MASK) != (crtc->pipe << PFIT_PIPE_SHIFT))
5479 pipe_config->gmch_pfit.control = tmp;
5480 pipe_config->gmch_pfit.pgm_ratios = I915_READ(PFIT_PGM_RATIOS);
5481 if (INTEL_INFO(dev)->gen < 5)
5482 pipe_config->gmch_pfit.lvds_border_bits =
5483 I915_READ(LVDS) & LVDS_BORDER_ENABLE;
5486 static void vlv_crtc_clock_get(struct intel_crtc *crtc,
5487 struct intel_crtc_config *pipe_config)
5489 struct drm_device *dev = crtc->base.dev;
5490 struct drm_i915_private *dev_priv = dev->dev_private;
5491 int pipe = pipe_config->cpu_transcoder;
5492 intel_clock_t clock;
5494 int refclk = 100000;
5496 mutex_lock(&dev_priv->dpio_lock);
5497 mdiv = vlv_dpio_read(dev_priv, pipe, VLV_PLL_DW3(pipe));
5498 mutex_unlock(&dev_priv->dpio_lock);
5500 clock.m1 = (mdiv >> DPIO_M1DIV_SHIFT) & 7;
5501 clock.m2 = mdiv & DPIO_M2DIV_MASK;
5502 clock.n = (mdiv >> DPIO_N_SHIFT) & 0xf;
5503 clock.p1 = (mdiv >> DPIO_P1_SHIFT) & 7;
5504 clock.p2 = (mdiv >> DPIO_P2_SHIFT) & 0x1f;
5506 vlv_clock(refclk, &clock);
5508 /* clock.dot is the fast clock */
5509 pipe_config->port_clock = clock.dot / 5;
5512 static bool i9xx_get_pipe_config(struct intel_crtc *crtc,
5513 struct intel_crtc_config *pipe_config)
5515 struct drm_device *dev = crtc->base.dev;
5516 struct drm_i915_private *dev_priv = dev->dev_private;
5519 pipe_config->cpu_transcoder = (enum transcoder) crtc->pipe;
5520 pipe_config->shared_dpll = DPLL_ID_PRIVATE;
5522 tmp = I915_READ(PIPECONF(crtc->pipe));
5523 if (!(tmp & PIPECONF_ENABLE))
5526 if (IS_G4X(dev) || IS_VALLEYVIEW(dev)) {
5527 switch (tmp & PIPECONF_BPC_MASK) {
5529 pipe_config->pipe_bpp = 18;
5532 pipe_config->pipe_bpp = 24;
5534 case PIPECONF_10BPC:
5535 pipe_config->pipe_bpp = 30;
5542 if (INTEL_INFO(dev)->gen < 4)
5543 pipe_config->double_wide = tmp & PIPECONF_DOUBLE_WIDE;
5545 intel_get_pipe_timings(crtc, pipe_config);
5547 i9xx_get_pfit_config(crtc, pipe_config);
5549 if (INTEL_INFO(dev)->gen >= 4) {
5550 tmp = I915_READ(DPLL_MD(crtc->pipe));
5551 pipe_config->pixel_multiplier =
5552 ((tmp & DPLL_MD_UDI_MULTIPLIER_MASK)
5553 >> DPLL_MD_UDI_MULTIPLIER_SHIFT) + 1;
5554 pipe_config->dpll_hw_state.dpll_md = tmp;
5555 } else if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev)) {
5556 tmp = I915_READ(DPLL(crtc->pipe));
5557 pipe_config->pixel_multiplier =
5558 ((tmp & SDVO_MULTIPLIER_MASK)
5559 >> SDVO_MULTIPLIER_SHIFT_HIRES) + 1;
5561 /* Note that on i915G/GM the pixel multiplier is in the sdvo
5562 * port and will be fixed up in the encoder->get_config
5564 pipe_config->pixel_multiplier = 1;
5566 pipe_config->dpll_hw_state.dpll = I915_READ(DPLL(crtc->pipe));
5567 if (!IS_VALLEYVIEW(dev)) {
5568 pipe_config->dpll_hw_state.fp0 = I915_READ(FP0(crtc->pipe));
5569 pipe_config->dpll_hw_state.fp1 = I915_READ(FP1(crtc->pipe));
5571 /* Mask out read-only status bits. */
5572 pipe_config->dpll_hw_state.dpll &= ~(DPLL_LOCK_VLV |
5573 DPLL_PORTC_READY_MASK |
5574 DPLL_PORTB_READY_MASK);
5577 if (IS_VALLEYVIEW(dev))
5578 vlv_crtc_clock_get(crtc, pipe_config);
5580 i9xx_crtc_clock_get(crtc, pipe_config);
5585 static void ironlake_init_pch_refclk(struct drm_device *dev)
5587 struct drm_i915_private *dev_priv = dev->dev_private;
5588 struct drm_mode_config *mode_config = &dev->mode_config;
5589 struct intel_encoder *encoder;
5591 bool has_lvds = false;
5592 bool has_cpu_edp = false;
5593 bool has_panel = false;
5594 bool has_ck505 = false;
5595 bool can_ssc = false;
5597 /* We need to take the global config into account */
5598 list_for_each_entry(encoder, &mode_config->encoder_list,
5600 switch (encoder->type) {
5601 case INTEL_OUTPUT_LVDS:
5605 case INTEL_OUTPUT_EDP:
5607 if (enc_to_dig_port(&encoder->base)->port == PORT_A)
5613 if (HAS_PCH_IBX(dev)) {
5614 has_ck505 = dev_priv->vbt.display_clock_mode;
5615 can_ssc = has_ck505;
5621 DRM_DEBUG_KMS("has_panel %d has_lvds %d has_ck505 %d\n",
5622 has_panel, has_lvds, has_ck505);
5624 /* Ironlake: try to setup display ref clock before DPLL
5625 * enabling. This is only under driver's control after
5626 * PCH B stepping, previous chipset stepping should be
5627 * ignoring this setting.
5629 val = I915_READ(PCH_DREF_CONTROL);
5631 /* As we must carefully and slowly disable/enable each source in turn,
5632 * compute the final state we want first and check if we need to
5633 * make any changes at all.
5636 final &= ~DREF_NONSPREAD_SOURCE_MASK;
5638 final |= DREF_NONSPREAD_CK505_ENABLE;
5640 final |= DREF_NONSPREAD_SOURCE_ENABLE;
5642 final &= ~DREF_SSC_SOURCE_MASK;
5643 final &= ~DREF_CPU_SOURCE_OUTPUT_MASK;
5644 final &= ~DREF_SSC1_ENABLE;
5647 final |= DREF_SSC_SOURCE_ENABLE;
5649 if (intel_panel_use_ssc(dev_priv) && can_ssc)
5650 final |= DREF_SSC1_ENABLE;
5653 if (intel_panel_use_ssc(dev_priv) && can_ssc)
5654 final |= DREF_CPU_SOURCE_OUTPUT_DOWNSPREAD;
5656 final |= DREF_CPU_SOURCE_OUTPUT_NONSPREAD;
5658 final |= DREF_CPU_SOURCE_OUTPUT_DISABLE;
5660 final |= DREF_SSC_SOURCE_DISABLE;
5661 final |= DREF_CPU_SOURCE_OUTPUT_DISABLE;
5667 /* Always enable nonspread source */
5668 val &= ~DREF_NONSPREAD_SOURCE_MASK;
5671 val |= DREF_NONSPREAD_CK505_ENABLE;
5673 val |= DREF_NONSPREAD_SOURCE_ENABLE;
5676 val &= ~DREF_SSC_SOURCE_MASK;
5677 val |= DREF_SSC_SOURCE_ENABLE;
5679 /* SSC must be turned on before enabling the CPU output */
5680 if (intel_panel_use_ssc(dev_priv) && can_ssc) {
5681 DRM_DEBUG_KMS("Using SSC on panel\n");
5682 val |= DREF_SSC1_ENABLE;
5684 val &= ~DREF_SSC1_ENABLE;
5686 /* Get SSC going before enabling the outputs */
5687 I915_WRITE(PCH_DREF_CONTROL, val);
5688 POSTING_READ(PCH_DREF_CONTROL);
5691 val &= ~DREF_CPU_SOURCE_OUTPUT_MASK;
5693 /* Enable CPU source on CPU attached eDP */
5695 if (intel_panel_use_ssc(dev_priv) && can_ssc) {
5696 DRM_DEBUG_KMS("Using SSC on eDP\n");
5697 val |= DREF_CPU_SOURCE_OUTPUT_DOWNSPREAD;
5700 val |= DREF_CPU_SOURCE_OUTPUT_NONSPREAD;
5702 val |= DREF_CPU_SOURCE_OUTPUT_DISABLE;
5704 I915_WRITE(PCH_DREF_CONTROL, val);
5705 POSTING_READ(PCH_DREF_CONTROL);
5708 DRM_DEBUG_KMS("Disabling SSC entirely\n");
5710 val &= ~DREF_CPU_SOURCE_OUTPUT_MASK;
5712 /* Turn off CPU output */
5713 val |= DREF_CPU_SOURCE_OUTPUT_DISABLE;
5715 I915_WRITE(PCH_DREF_CONTROL, val);
5716 POSTING_READ(PCH_DREF_CONTROL);
5719 /* Turn off the SSC source */
5720 val &= ~DREF_SSC_SOURCE_MASK;
5721 val |= DREF_SSC_SOURCE_DISABLE;
5724 val &= ~DREF_SSC1_ENABLE;
5726 I915_WRITE(PCH_DREF_CONTROL, val);
5727 POSTING_READ(PCH_DREF_CONTROL);
5731 BUG_ON(val != final);
5734 static void lpt_reset_fdi_mphy(struct drm_i915_private *dev_priv)
5738 tmp = I915_READ(SOUTH_CHICKEN2);
5739 tmp |= FDI_MPHY_IOSFSB_RESET_CTL;
5740 I915_WRITE(SOUTH_CHICKEN2, tmp);
5742 if (wait_for_atomic_us(I915_READ(SOUTH_CHICKEN2) &
5743 FDI_MPHY_IOSFSB_RESET_STATUS, 100))
5744 DRM_ERROR("FDI mPHY reset assert timeout\n");
5746 tmp = I915_READ(SOUTH_CHICKEN2);
5747 tmp &= ~FDI_MPHY_IOSFSB_RESET_CTL;
5748 I915_WRITE(SOUTH_CHICKEN2, tmp);
5750 if (wait_for_atomic_us((I915_READ(SOUTH_CHICKEN2) &
5751 FDI_MPHY_IOSFSB_RESET_STATUS) == 0, 100))
5752 DRM_ERROR("FDI mPHY reset de-assert timeout\n");
5755 /* WaMPhyProgramming:hsw */
5756 static void lpt_program_fdi_mphy(struct drm_i915_private *dev_priv)
5760 tmp = intel_sbi_read(dev_priv, 0x8008, SBI_MPHY);
5761 tmp &= ~(0xFF << 24);
5762 tmp |= (0x12 << 24);
5763 intel_sbi_write(dev_priv, 0x8008, tmp, SBI_MPHY);
5765 tmp = intel_sbi_read(dev_priv, 0x2008, SBI_MPHY);
5767 intel_sbi_write(dev_priv, 0x2008, tmp, SBI_MPHY);
5769 tmp = intel_sbi_read(dev_priv, 0x2108, SBI_MPHY);
5771 intel_sbi_write(dev_priv, 0x2108, tmp, SBI_MPHY);
5773 tmp = intel_sbi_read(dev_priv, 0x206C, SBI_MPHY);
5774 tmp |= (1 << 24) | (1 << 21) | (1 << 18);
5775 intel_sbi_write(dev_priv, 0x206C, tmp, SBI_MPHY);
5777 tmp = intel_sbi_read(dev_priv, 0x216C, SBI_MPHY);
5778 tmp |= (1 << 24) | (1 << 21) | (1 << 18);
5779 intel_sbi_write(dev_priv, 0x216C, tmp, SBI_MPHY);
5781 tmp = intel_sbi_read(dev_priv, 0x2080, SBI_MPHY);
5784 intel_sbi_write(dev_priv, 0x2080, tmp, SBI_MPHY);
5786 tmp = intel_sbi_read(dev_priv, 0x2180, SBI_MPHY);
5789 intel_sbi_write(dev_priv, 0x2180, tmp, SBI_MPHY);
5791 tmp = intel_sbi_read(dev_priv, 0x208C, SBI_MPHY);
5794 intel_sbi_write(dev_priv, 0x208C, tmp, SBI_MPHY);
5796 tmp = intel_sbi_read(dev_priv, 0x218C, SBI_MPHY);
5799 intel_sbi_write(dev_priv, 0x218C, tmp, SBI_MPHY);
5801 tmp = intel_sbi_read(dev_priv, 0x2098, SBI_MPHY);
5802 tmp &= ~(0xFF << 16);
5803 tmp |= (0x1C << 16);
5804 intel_sbi_write(dev_priv, 0x2098, tmp, SBI_MPHY);
5806 tmp = intel_sbi_read(dev_priv, 0x2198, SBI_MPHY);
5807 tmp &= ~(0xFF << 16);
5808 tmp |= (0x1C << 16);
5809 intel_sbi_write(dev_priv, 0x2198, tmp, SBI_MPHY);
5811 tmp = intel_sbi_read(dev_priv, 0x20C4, SBI_MPHY);
5813 intel_sbi_write(dev_priv, 0x20C4, tmp, SBI_MPHY);
5815 tmp = intel_sbi_read(dev_priv, 0x21C4, SBI_MPHY);
5817 intel_sbi_write(dev_priv, 0x21C4, tmp, SBI_MPHY);
5819 tmp = intel_sbi_read(dev_priv, 0x20EC, SBI_MPHY);
5820 tmp &= ~(0xF << 28);
5822 intel_sbi_write(dev_priv, 0x20EC, tmp, SBI_MPHY);
5824 tmp = intel_sbi_read(dev_priv, 0x21EC, SBI_MPHY);
5825 tmp &= ~(0xF << 28);
5827 intel_sbi_write(dev_priv, 0x21EC, tmp, SBI_MPHY);
5830 /* Implements 3 different sequences from BSpec chapter "Display iCLK
5831 * Programming" based on the parameters passed:
5832 * - Sequence to enable CLKOUT_DP
5833 * - Sequence to enable CLKOUT_DP without spread
5834 * - Sequence to enable CLKOUT_DP for FDI usage and configure PCH FDI I/O
5836 static void lpt_enable_clkout_dp(struct drm_device *dev, bool with_spread,
5839 struct drm_i915_private *dev_priv = dev->dev_private;
5842 if (WARN(with_fdi && !with_spread, "FDI requires downspread\n"))
5844 if (WARN(dev_priv->pch_id == INTEL_PCH_LPT_LP_DEVICE_ID_TYPE &&
5845 with_fdi, "LP PCH doesn't have FDI\n"))
5848 mutex_lock(&dev_priv->dpio_lock);
5850 tmp = intel_sbi_read(dev_priv, SBI_SSCCTL, SBI_ICLK);
5851 tmp &= ~SBI_SSCCTL_DISABLE;
5852 tmp |= SBI_SSCCTL_PATHALT;
5853 intel_sbi_write(dev_priv, SBI_SSCCTL, tmp, SBI_ICLK);
5858 tmp = intel_sbi_read(dev_priv, SBI_SSCCTL, SBI_ICLK);
5859 tmp &= ~SBI_SSCCTL_PATHALT;
5860 intel_sbi_write(dev_priv, SBI_SSCCTL, tmp, SBI_ICLK);
5863 lpt_reset_fdi_mphy(dev_priv);
5864 lpt_program_fdi_mphy(dev_priv);
5868 reg = (dev_priv->pch_id == INTEL_PCH_LPT_LP_DEVICE_ID_TYPE) ?
5869 SBI_GEN0 : SBI_DBUFF0;
5870 tmp = intel_sbi_read(dev_priv, reg, SBI_ICLK);
5871 tmp |= SBI_GEN0_CFG_BUFFENABLE_DISABLE;
5872 intel_sbi_write(dev_priv, reg, tmp, SBI_ICLK);
5874 mutex_unlock(&dev_priv->dpio_lock);
5877 /* Sequence to disable CLKOUT_DP */
5878 static void lpt_disable_clkout_dp(struct drm_device *dev)
5880 struct drm_i915_private *dev_priv = dev->dev_private;
5883 mutex_lock(&dev_priv->dpio_lock);
5885 reg = (dev_priv->pch_id == INTEL_PCH_LPT_LP_DEVICE_ID_TYPE) ?
5886 SBI_GEN0 : SBI_DBUFF0;
5887 tmp = intel_sbi_read(dev_priv, reg, SBI_ICLK);
5888 tmp &= ~SBI_GEN0_CFG_BUFFENABLE_DISABLE;
5889 intel_sbi_write(dev_priv, reg, tmp, SBI_ICLK);
5891 tmp = intel_sbi_read(dev_priv, SBI_SSCCTL, SBI_ICLK);
5892 if (!(tmp & SBI_SSCCTL_DISABLE)) {
5893 if (!(tmp & SBI_SSCCTL_PATHALT)) {
5894 tmp |= SBI_SSCCTL_PATHALT;
5895 intel_sbi_write(dev_priv, SBI_SSCCTL, tmp, SBI_ICLK);
5898 tmp |= SBI_SSCCTL_DISABLE;
5899 intel_sbi_write(dev_priv, SBI_SSCCTL, tmp, SBI_ICLK);
5902 mutex_unlock(&dev_priv->dpio_lock);
5905 static void lpt_init_pch_refclk(struct drm_device *dev)
5907 struct drm_mode_config *mode_config = &dev->mode_config;
5908 struct intel_encoder *encoder;
5909 bool has_vga = false;
5911 list_for_each_entry(encoder, &mode_config->encoder_list, base.head) {
5912 switch (encoder->type) {
5913 case INTEL_OUTPUT_ANALOG:
5920 lpt_enable_clkout_dp(dev, true, true);
5922 lpt_disable_clkout_dp(dev);
5926 * Initialize reference clocks when the driver loads
5928 void intel_init_pch_refclk(struct drm_device *dev)
5930 if (HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev))
5931 ironlake_init_pch_refclk(dev);
5932 else if (HAS_PCH_LPT(dev))
5933 lpt_init_pch_refclk(dev);
5936 static int ironlake_get_refclk(struct drm_crtc *crtc)
5938 struct drm_device *dev = crtc->dev;
5939 struct drm_i915_private *dev_priv = dev->dev_private;
5940 struct intel_encoder *encoder;
5941 int num_connectors = 0;
5942 bool is_lvds = false;
5944 for_each_encoder_on_crtc(dev, crtc, encoder) {
5945 switch (encoder->type) {
5946 case INTEL_OUTPUT_LVDS:
5953 if (is_lvds && intel_panel_use_ssc(dev_priv) && num_connectors < 2) {
5954 DRM_DEBUG_KMS("using SSC reference clock of %d kHz\n",
5955 dev_priv->vbt.lvds_ssc_freq);
5956 return dev_priv->vbt.lvds_ssc_freq;
5962 static void ironlake_set_pipeconf(struct drm_crtc *crtc)
5964 struct drm_i915_private *dev_priv = crtc->dev->dev_private;
5965 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
5966 int pipe = intel_crtc->pipe;
5971 switch (intel_crtc->config.pipe_bpp) {
5973 val |= PIPECONF_6BPC;
5976 val |= PIPECONF_8BPC;
5979 val |= PIPECONF_10BPC;
5982 val |= PIPECONF_12BPC;
5985 /* Case prevented by intel_choose_pipe_bpp_dither. */
5989 if (intel_crtc->config.dither)
5990 val |= (PIPECONF_DITHER_EN | PIPECONF_DITHER_TYPE_SP);
5992 if (intel_crtc->config.adjusted_mode.flags & DRM_MODE_FLAG_INTERLACE)
5993 val |= PIPECONF_INTERLACED_ILK;
5995 val |= PIPECONF_PROGRESSIVE;
5997 if (intel_crtc->config.limited_color_range)
5998 val |= PIPECONF_COLOR_RANGE_SELECT;
6000 I915_WRITE(PIPECONF(pipe), val);
6001 POSTING_READ(PIPECONF(pipe));
6005 * Set up the pipe CSC unit.
6007 * Currently only full range RGB to limited range RGB conversion
6008 * is supported, but eventually this should handle various
6009 * RGB<->YCbCr scenarios as well.
6011 static void intel_set_pipe_csc(struct drm_crtc *crtc)
6013 struct drm_device *dev = crtc->dev;
6014 struct drm_i915_private *dev_priv = dev->dev_private;
6015 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
6016 int pipe = intel_crtc->pipe;
6017 uint16_t coeff = 0x7800; /* 1.0 */
6020 * TODO: Check what kind of values actually come out of the pipe
6021 * with these coeff/postoff values and adjust to get the best
6022 * accuracy. Perhaps we even need to take the bpc value into
6026 if (intel_crtc->config.limited_color_range)
6027 coeff = ((235 - 16) * (1 << 12) / 255) & 0xff8; /* 0.xxx... */
6030 * GY/GU and RY/RU should be the other way around according
6031 * to BSpec, but reality doesn't agree. Just set them up in
6032 * a way that results in the correct picture.
6034 I915_WRITE(PIPE_CSC_COEFF_RY_GY(pipe), coeff << 16);
6035 I915_WRITE(PIPE_CSC_COEFF_BY(pipe), 0);
6037 I915_WRITE(PIPE_CSC_COEFF_RU_GU(pipe), coeff);
6038 I915_WRITE(PIPE_CSC_COEFF_BU(pipe), 0);
6040 I915_WRITE(PIPE_CSC_COEFF_RV_GV(pipe), 0);
6041 I915_WRITE(PIPE_CSC_COEFF_BV(pipe), coeff << 16);
6043 I915_WRITE(PIPE_CSC_PREOFF_HI(pipe), 0);
6044 I915_WRITE(PIPE_CSC_PREOFF_ME(pipe), 0);
6045 I915_WRITE(PIPE_CSC_PREOFF_LO(pipe), 0);
6047 if (INTEL_INFO(dev)->gen > 6) {
6048 uint16_t postoff = 0;
6050 if (intel_crtc->config.limited_color_range)
6051 postoff = (16 * (1 << 12) / 255) & 0x1fff;
6053 I915_WRITE(PIPE_CSC_POSTOFF_HI(pipe), postoff);
6054 I915_WRITE(PIPE_CSC_POSTOFF_ME(pipe), postoff);
6055 I915_WRITE(PIPE_CSC_POSTOFF_LO(pipe), postoff);
6057 I915_WRITE(PIPE_CSC_MODE(pipe), 0);
6059 uint32_t mode = CSC_MODE_YUV_TO_RGB;
6061 if (intel_crtc->config.limited_color_range)
6062 mode |= CSC_BLACK_SCREEN_OFFSET;
6064 I915_WRITE(PIPE_CSC_MODE(pipe), mode);
6068 static void haswell_set_pipeconf(struct drm_crtc *crtc)
6070 struct drm_device *dev = crtc->dev;
6071 struct drm_i915_private *dev_priv = dev->dev_private;
6072 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
6073 enum pipe pipe = intel_crtc->pipe;
6074 enum transcoder cpu_transcoder = intel_crtc->config.cpu_transcoder;
6079 if (IS_HASWELL(dev) && intel_crtc->config.dither)
6080 val |= (PIPECONF_DITHER_EN | PIPECONF_DITHER_TYPE_SP);
6082 if (intel_crtc->config.adjusted_mode.flags & DRM_MODE_FLAG_INTERLACE)
6083 val |= PIPECONF_INTERLACED_ILK;
6085 val |= PIPECONF_PROGRESSIVE;
6087 I915_WRITE(PIPECONF(cpu_transcoder), val);
6088 POSTING_READ(PIPECONF(cpu_transcoder));
6090 I915_WRITE(GAMMA_MODE(intel_crtc->pipe), GAMMA_MODE_MODE_8BIT);
6091 POSTING_READ(GAMMA_MODE(intel_crtc->pipe));
6093 if (IS_BROADWELL(dev)) {
6096 switch (intel_crtc->config.pipe_bpp) {
6098 val |= PIPEMISC_DITHER_6_BPC;
6101 val |= PIPEMISC_DITHER_8_BPC;
6104 val |= PIPEMISC_DITHER_10_BPC;
6107 val |= PIPEMISC_DITHER_12_BPC;
6110 /* Case prevented by pipe_config_set_bpp. */
6114 if (intel_crtc->config.dither)
6115 val |= PIPEMISC_DITHER_ENABLE | PIPEMISC_DITHER_TYPE_SP;
6117 I915_WRITE(PIPEMISC(pipe), val);
6121 static bool ironlake_compute_clocks(struct drm_crtc *crtc,
6122 intel_clock_t *clock,
6123 bool *has_reduced_clock,
6124 intel_clock_t *reduced_clock)
6126 struct drm_device *dev = crtc->dev;
6127 struct drm_i915_private *dev_priv = dev->dev_private;
6128 struct intel_encoder *intel_encoder;
6130 const intel_limit_t *limit;
6131 bool ret, is_lvds = false;
6133 for_each_encoder_on_crtc(dev, crtc, intel_encoder) {
6134 switch (intel_encoder->type) {
6135 case INTEL_OUTPUT_LVDS:
6141 refclk = ironlake_get_refclk(crtc);
6144 * Returns a set of divisors for the desired target clock with the given
6145 * refclk, or FALSE. The returned values represent the clock equation:
6146 * reflck * (5 * (m1 + 2) + (m2 + 2)) / (n + 2) / p1 / p2.
6148 limit = intel_limit(crtc, refclk);
6149 ret = dev_priv->display.find_dpll(limit, crtc,
6150 to_intel_crtc(crtc)->config.port_clock,
6151 refclk, NULL, clock);
6155 if (is_lvds && dev_priv->lvds_downclock_avail) {
6157 * Ensure we match the reduced clock's P to the target clock.
6158 * If the clocks don't match, we can't switch the display clock
6159 * by using the FP0/FP1. In such case we will disable the LVDS
6160 * downclock feature.
6162 *has_reduced_clock =
6163 dev_priv->display.find_dpll(limit, crtc,
6164 dev_priv->lvds_downclock,
6172 int ironlake_get_lanes_required(int target_clock, int link_bw, int bpp)
6175 * Account for spread spectrum to avoid
6176 * oversubscribing the link. Max center spread
6177 * is 2.5%; use 5% for safety's sake.
6179 u32 bps = target_clock * bpp * 21 / 20;
6180 return bps / (link_bw * 8) + 1;
6183 static bool ironlake_needs_fb_cb_tune(struct dpll *dpll, int factor)
6185 return i9xx_dpll_compute_m(dpll) < factor * dpll->n;
6188 static uint32_t ironlake_compute_dpll(struct intel_crtc *intel_crtc,
6190 intel_clock_t *reduced_clock, u32 *fp2)
6192 struct drm_crtc *crtc = &intel_crtc->base;
6193 struct drm_device *dev = crtc->dev;
6194 struct drm_i915_private *dev_priv = dev->dev_private;
6195 struct intel_encoder *intel_encoder;
6197 int factor, num_connectors = 0;
6198 bool is_lvds = false, is_sdvo = false;
6200 for_each_encoder_on_crtc(dev, crtc, intel_encoder) {
6201 switch (intel_encoder->type) {
6202 case INTEL_OUTPUT_LVDS:
6205 case INTEL_OUTPUT_SDVO:
6206 case INTEL_OUTPUT_HDMI:
6214 /* Enable autotuning of the PLL clock (if permissible) */
6217 if ((intel_panel_use_ssc(dev_priv) &&
6218 dev_priv->vbt.lvds_ssc_freq == 100000) ||
6219 (HAS_PCH_IBX(dev) && intel_is_dual_link_lvds(dev)))
6221 } else if (intel_crtc->config.sdvo_tv_clock)
6224 if (ironlake_needs_fb_cb_tune(&intel_crtc->config.dpll, factor))
6227 if (fp2 && (reduced_clock->m < factor * reduced_clock->n))
6233 dpll |= DPLLB_MODE_LVDS;
6235 dpll |= DPLLB_MODE_DAC_SERIAL;
6237 dpll |= (intel_crtc->config.pixel_multiplier - 1)
6238 << PLL_REF_SDVO_HDMI_MULTIPLIER_SHIFT;
6241 dpll |= DPLL_SDVO_HIGH_SPEED;
6242 if (intel_crtc->config.has_dp_encoder)
6243 dpll |= DPLL_SDVO_HIGH_SPEED;
6245 /* compute bitmask from p1 value */
6246 dpll |= (1 << (intel_crtc->config.dpll.p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT;
6248 dpll |= (1 << (intel_crtc->config.dpll.p1 - 1)) << DPLL_FPA1_P1_POST_DIV_SHIFT;
6250 switch (intel_crtc->config.dpll.p2) {
6252 dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_5;
6255 dpll |= DPLLB_LVDS_P2_CLOCK_DIV_7;
6258 dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_10;
6261 dpll |= DPLLB_LVDS_P2_CLOCK_DIV_14;
6265 if (is_lvds && intel_panel_use_ssc(dev_priv) && num_connectors < 2)
6266 dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN;
6268 dpll |= PLL_REF_INPUT_DREFCLK;
6270 return dpll | DPLL_VCO_ENABLE;
6273 static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
6275 struct drm_framebuffer *fb)
6277 struct drm_device *dev = crtc->dev;
6278 struct drm_i915_private *dev_priv = dev->dev_private;
6279 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
6280 int pipe = intel_crtc->pipe;
6281 int plane = intel_crtc->plane;
6282 int num_connectors = 0;
6283 intel_clock_t clock, reduced_clock;
6284 u32 dpll = 0, fp = 0, fp2 = 0;
6285 bool ok, has_reduced_clock = false;
6286 bool is_lvds = false;
6287 struct intel_encoder *encoder;
6288 struct intel_shared_dpll *pll;
6291 for_each_encoder_on_crtc(dev, crtc, encoder) {
6292 switch (encoder->type) {
6293 case INTEL_OUTPUT_LVDS:
6301 WARN(!(HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev)),
6302 "Unexpected PCH type %d\n", INTEL_PCH_TYPE(dev));
6304 ok = ironlake_compute_clocks(crtc, &clock,
6305 &has_reduced_clock, &reduced_clock);
6306 if (!ok && !intel_crtc->config.clock_set) {
6307 DRM_ERROR("Couldn't find PLL settings for mode!\n");
6310 /* Compat-code for transition, will disappear. */
6311 if (!intel_crtc->config.clock_set) {
6312 intel_crtc->config.dpll.n = clock.n;
6313 intel_crtc->config.dpll.m1 = clock.m1;
6314 intel_crtc->config.dpll.m2 = clock.m2;
6315 intel_crtc->config.dpll.p1 = clock.p1;
6316 intel_crtc->config.dpll.p2 = clock.p2;
6319 /* CPU eDP is the only output that doesn't need a PCH PLL of its own. */
6320 if (intel_crtc->config.has_pch_encoder) {
6321 fp = i9xx_dpll_compute_fp(&intel_crtc->config.dpll);
6322 if (has_reduced_clock)
6323 fp2 = i9xx_dpll_compute_fp(&reduced_clock);
6325 dpll = ironlake_compute_dpll(intel_crtc,
6326 &fp, &reduced_clock,
6327 has_reduced_clock ? &fp2 : NULL);
6329 intel_crtc->config.dpll_hw_state.dpll = dpll;
6330 intel_crtc->config.dpll_hw_state.fp0 = fp;
6331 if (has_reduced_clock)
6332 intel_crtc->config.dpll_hw_state.fp1 = fp2;
6334 intel_crtc->config.dpll_hw_state.fp1 = fp;
6336 pll = intel_get_shared_dpll(intel_crtc);
6338 DRM_DEBUG_DRIVER("failed to find PLL for pipe %c\n",
6343 intel_put_shared_dpll(intel_crtc);
6345 if (intel_crtc->config.has_dp_encoder)
6346 intel_dp_set_m_n(intel_crtc);
6348 if (is_lvds && has_reduced_clock && i915.powersave)
6349 intel_crtc->lowfreq_avail = true;
6351 intel_crtc->lowfreq_avail = false;
6353 intel_set_pipe_timings(intel_crtc);
6355 if (intel_crtc->config.has_pch_encoder) {
6356 intel_cpu_transcoder_set_m_n(intel_crtc,
6357 &intel_crtc->config.fdi_m_n);
6360 ironlake_set_pipeconf(crtc);
6362 /* Set up the display plane register */
6363 I915_WRITE(DSPCNTR(plane), DISPPLANE_GAMMA_ENABLE);
6364 POSTING_READ(DSPCNTR(plane));
6366 ret = intel_pipe_set_base(crtc, x, y, fb);
6371 static void intel_pch_transcoder_get_m_n(struct intel_crtc *crtc,
6372 struct intel_link_m_n *m_n)
6374 struct drm_device *dev = crtc->base.dev;
6375 struct drm_i915_private *dev_priv = dev->dev_private;
6376 enum pipe pipe = crtc->pipe;
6378 m_n->link_m = I915_READ(PCH_TRANS_LINK_M1(pipe));
6379 m_n->link_n = I915_READ(PCH_TRANS_LINK_N1(pipe));
6380 m_n->gmch_m = I915_READ(PCH_TRANS_DATA_M1(pipe))
6382 m_n->gmch_n = I915_READ(PCH_TRANS_DATA_N1(pipe));
6383 m_n->tu = ((I915_READ(PCH_TRANS_DATA_M1(pipe))
6384 & TU_SIZE_MASK) >> TU_SIZE_SHIFT) + 1;
6387 static void intel_cpu_transcoder_get_m_n(struct intel_crtc *crtc,
6388 enum transcoder transcoder,
6389 struct intel_link_m_n *m_n)
6391 struct drm_device *dev = crtc->base.dev;
6392 struct drm_i915_private *dev_priv = dev->dev_private;
6393 enum pipe pipe = crtc->pipe;
6395 if (INTEL_INFO(dev)->gen >= 5) {
6396 m_n->link_m = I915_READ(PIPE_LINK_M1(transcoder));
6397 m_n->link_n = I915_READ(PIPE_LINK_N1(transcoder));
6398 m_n->gmch_m = I915_READ(PIPE_DATA_M1(transcoder))
6400 m_n->gmch_n = I915_READ(PIPE_DATA_N1(transcoder));
6401 m_n->tu = ((I915_READ(PIPE_DATA_M1(transcoder))
6402 & TU_SIZE_MASK) >> TU_SIZE_SHIFT) + 1;
6404 m_n->link_m = I915_READ(PIPE_LINK_M_G4X(pipe));
6405 m_n->link_n = I915_READ(PIPE_LINK_N_G4X(pipe));
6406 m_n->gmch_m = I915_READ(PIPE_DATA_M_G4X(pipe))
6408 m_n->gmch_n = I915_READ(PIPE_DATA_N_G4X(pipe));
6409 m_n->tu = ((I915_READ(PIPE_DATA_M_G4X(pipe))
6410 & TU_SIZE_MASK) >> TU_SIZE_SHIFT) + 1;
6414 void intel_dp_get_m_n(struct intel_crtc *crtc,
6415 struct intel_crtc_config *pipe_config)
6417 if (crtc->config.has_pch_encoder)
6418 intel_pch_transcoder_get_m_n(crtc, &pipe_config->dp_m_n);
6420 intel_cpu_transcoder_get_m_n(crtc, pipe_config->cpu_transcoder,
6421 &pipe_config->dp_m_n);
6424 static void ironlake_get_fdi_m_n_config(struct intel_crtc *crtc,
6425 struct intel_crtc_config *pipe_config)
6427 intel_cpu_transcoder_get_m_n(crtc, pipe_config->cpu_transcoder,
6428 &pipe_config->fdi_m_n);
6431 static void ironlake_get_pfit_config(struct intel_crtc *crtc,
6432 struct intel_crtc_config *pipe_config)
6434 struct drm_device *dev = crtc->base.dev;
6435 struct drm_i915_private *dev_priv = dev->dev_private;
6438 tmp = I915_READ(PF_CTL(crtc->pipe));
6440 if (tmp & PF_ENABLE) {
6441 pipe_config->pch_pfit.enabled = true;
6442 pipe_config->pch_pfit.pos = I915_READ(PF_WIN_POS(crtc->pipe));
6443 pipe_config->pch_pfit.size = I915_READ(PF_WIN_SZ(crtc->pipe));
6445 /* We currently do not free assignements of panel fitters on
6446 * ivb/hsw (since we don't use the higher upscaling modes which
6447 * differentiates them) so just WARN about this case for now. */
6449 WARN_ON((tmp & PF_PIPE_SEL_MASK_IVB) !=
6450 PF_PIPE_SEL_IVB(crtc->pipe));
6455 static bool ironlake_get_pipe_config(struct intel_crtc *crtc,
6456 struct intel_crtc_config *pipe_config)
6458 struct drm_device *dev = crtc->base.dev;
6459 struct drm_i915_private *dev_priv = dev->dev_private;
6462 pipe_config->cpu_transcoder = (enum transcoder) crtc->pipe;
6463 pipe_config->shared_dpll = DPLL_ID_PRIVATE;
6465 tmp = I915_READ(PIPECONF(crtc->pipe));
6466 if (!(tmp & PIPECONF_ENABLE))
6469 switch (tmp & PIPECONF_BPC_MASK) {
6471 pipe_config->pipe_bpp = 18;
6474 pipe_config->pipe_bpp = 24;
6476 case PIPECONF_10BPC:
6477 pipe_config->pipe_bpp = 30;
6479 case PIPECONF_12BPC:
6480 pipe_config->pipe_bpp = 36;
6486 if (I915_READ(PCH_TRANSCONF(crtc->pipe)) & TRANS_ENABLE) {
6487 struct intel_shared_dpll *pll;
6489 pipe_config->has_pch_encoder = true;
6491 tmp = I915_READ(FDI_RX_CTL(crtc->pipe));
6492 pipe_config->fdi_lanes = ((FDI_DP_PORT_WIDTH_MASK & tmp) >>
6493 FDI_DP_PORT_WIDTH_SHIFT) + 1;
6495 ironlake_get_fdi_m_n_config(crtc, pipe_config);
6497 if (HAS_PCH_IBX(dev_priv->dev)) {
6498 pipe_config->shared_dpll =
6499 (enum intel_dpll_id) crtc->pipe;
6501 tmp = I915_READ(PCH_DPLL_SEL);
6502 if (tmp & TRANS_DPLLB_SEL(crtc->pipe))
6503 pipe_config->shared_dpll = DPLL_ID_PCH_PLL_B;
6505 pipe_config->shared_dpll = DPLL_ID_PCH_PLL_A;
6508 pll = &dev_priv->shared_dplls[pipe_config->shared_dpll];
6510 WARN_ON(!pll->get_hw_state(dev_priv, pll,
6511 &pipe_config->dpll_hw_state));
6513 tmp = pipe_config->dpll_hw_state.dpll;
6514 pipe_config->pixel_multiplier =
6515 ((tmp & PLL_REF_SDVO_HDMI_MULTIPLIER_MASK)
6516 >> PLL_REF_SDVO_HDMI_MULTIPLIER_SHIFT) + 1;
6518 ironlake_pch_clock_get(crtc, pipe_config);
6520 pipe_config->pixel_multiplier = 1;
6523 intel_get_pipe_timings(crtc, pipe_config);
6525 ironlake_get_pfit_config(crtc, pipe_config);
6530 static void assert_can_disable_lcpll(struct drm_i915_private *dev_priv)
6532 struct drm_device *dev = dev_priv->dev;
6533 struct intel_ddi_plls *plls = &dev_priv->ddi_plls;
6534 struct intel_crtc *crtc;
6535 unsigned long irqflags;
6538 list_for_each_entry(crtc, &dev->mode_config.crtc_list, base.head)
6539 WARN(crtc->active, "CRTC for pipe %c enabled\n",
6540 pipe_name(crtc->pipe));
6542 WARN(I915_READ(HSW_PWR_WELL_DRIVER), "Power well on\n");
6543 WARN(plls->spll_refcount, "SPLL enabled\n");
6544 WARN(plls->wrpll1_refcount, "WRPLL1 enabled\n");
6545 WARN(plls->wrpll2_refcount, "WRPLL2 enabled\n");
6546 WARN(I915_READ(PCH_PP_STATUS) & PP_ON, "Panel power on\n");
6547 WARN(I915_READ(BLC_PWM_CPU_CTL2) & BLM_PWM_ENABLE,
6548 "CPU PWM1 enabled\n");
6549 WARN(I915_READ(HSW_BLC_PWM2_CTL) & BLM_PWM_ENABLE,
6550 "CPU PWM2 enabled\n");
6551 WARN(I915_READ(BLC_PWM_PCH_CTL1) & BLM_PCH_PWM_ENABLE,
6552 "PCH PWM1 enabled\n");
6553 WARN(I915_READ(UTIL_PIN_CTL) & UTIL_PIN_ENABLE,
6554 "Utility pin enabled\n");
6555 WARN(I915_READ(PCH_GTC_CTL) & PCH_GTC_ENABLE, "PCH GTC enabled\n");
6557 spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
6558 val = I915_READ(DEIMR);
6559 WARN((val | DE_PCH_EVENT_IVB) != 0xffffffff,
6560 "Unexpected DEIMR bits enabled: 0x%x\n", val);
6561 val = I915_READ(SDEIMR);
6562 WARN((val | SDE_HOTPLUG_MASK_CPT) != 0xffffffff,
6563 "Unexpected SDEIMR bits enabled: 0x%x\n", val);
6564 spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
6568 * This function implements pieces of two sequences from BSpec:
6569 * - Sequence for display software to disable LCPLL
6570 * - Sequence for display software to allow package C8+
6571 * The steps implemented here are just the steps that actually touch the LCPLL
6572 * register. Callers should take care of disabling all the display engine
6573 * functions, doing the mode unset, fixing interrupts, etc.
6575 static void hsw_disable_lcpll(struct drm_i915_private *dev_priv,
6576 bool switch_to_fclk, bool allow_power_down)
6580 assert_can_disable_lcpll(dev_priv);
6582 val = I915_READ(LCPLL_CTL);
6584 if (switch_to_fclk) {
6585 val |= LCPLL_CD_SOURCE_FCLK;
6586 I915_WRITE(LCPLL_CTL, val);
6588 if (wait_for_atomic_us(I915_READ(LCPLL_CTL) &
6589 LCPLL_CD_SOURCE_FCLK_DONE, 1))
6590 DRM_ERROR("Switching to FCLK failed\n");
6592 val = I915_READ(LCPLL_CTL);
6595 val |= LCPLL_PLL_DISABLE;
6596 I915_WRITE(LCPLL_CTL, val);
6597 POSTING_READ(LCPLL_CTL);
6599 if (wait_for((I915_READ(LCPLL_CTL) & LCPLL_PLL_LOCK) == 0, 1))
6600 DRM_ERROR("LCPLL still locked\n");
6602 val = I915_READ(D_COMP);
6603 val |= D_COMP_COMP_DISABLE;
6604 mutex_lock(&dev_priv->rps.hw_lock);
6605 if (sandybridge_pcode_write(dev_priv, GEN6_PCODE_WRITE_D_COMP, val))
6606 DRM_ERROR("Failed to disable D_COMP\n");
6607 mutex_unlock(&dev_priv->rps.hw_lock);
6608 POSTING_READ(D_COMP);
6611 if (wait_for((I915_READ(D_COMP) & D_COMP_RCOMP_IN_PROGRESS) == 0, 1))
6612 DRM_ERROR("D_COMP RCOMP still in progress\n");
6614 if (allow_power_down) {
6615 val = I915_READ(LCPLL_CTL);
6616 val |= LCPLL_POWER_DOWN_ALLOW;
6617 I915_WRITE(LCPLL_CTL, val);
6618 POSTING_READ(LCPLL_CTL);
6623 * Fully restores LCPLL, disallowing power down and switching back to LCPLL
6626 static void hsw_restore_lcpll(struct drm_i915_private *dev_priv)
6630 val = I915_READ(LCPLL_CTL);
6632 if ((val & (LCPLL_PLL_LOCK | LCPLL_PLL_DISABLE | LCPLL_CD_SOURCE_FCLK |
6633 LCPLL_POWER_DOWN_ALLOW)) == LCPLL_PLL_LOCK)
6636 /* Make sure we're not on PC8 state before disabling PC8, otherwise
6637 * we'll hang the machine! */
6638 gen6_gt_force_wake_get(dev_priv, FORCEWAKE_ALL);
6640 if (val & LCPLL_POWER_DOWN_ALLOW) {
6641 val &= ~LCPLL_POWER_DOWN_ALLOW;
6642 I915_WRITE(LCPLL_CTL, val);
6643 POSTING_READ(LCPLL_CTL);
6646 val = I915_READ(D_COMP);
6647 val |= D_COMP_COMP_FORCE;
6648 val &= ~D_COMP_COMP_DISABLE;
6649 mutex_lock(&dev_priv->rps.hw_lock);
6650 if (sandybridge_pcode_write(dev_priv, GEN6_PCODE_WRITE_D_COMP, val))
6651 DRM_ERROR("Failed to enable D_COMP\n");
6652 mutex_unlock(&dev_priv->rps.hw_lock);
6653 POSTING_READ(D_COMP);
6655 val = I915_READ(LCPLL_CTL);
6656 val &= ~LCPLL_PLL_DISABLE;
6657 I915_WRITE(LCPLL_CTL, val);
6659 if (wait_for(I915_READ(LCPLL_CTL) & LCPLL_PLL_LOCK, 5))
6660 DRM_ERROR("LCPLL not locked yet\n");
6662 if (val & LCPLL_CD_SOURCE_FCLK) {
6663 val = I915_READ(LCPLL_CTL);
6664 val &= ~LCPLL_CD_SOURCE_FCLK;
6665 I915_WRITE(LCPLL_CTL, val);
6667 if (wait_for_atomic_us((I915_READ(LCPLL_CTL) &
6668 LCPLL_CD_SOURCE_FCLK_DONE) == 0, 1))
6669 DRM_ERROR("Switching back to LCPLL failed\n");
6672 gen6_gt_force_wake_put(dev_priv, FORCEWAKE_ALL);
6675 void hsw_enable_pc8_work(struct work_struct *__work)
6677 struct drm_i915_private *dev_priv =
6678 container_of(to_delayed_work(__work), struct drm_i915_private,
6680 struct drm_device *dev = dev_priv->dev;
6683 WARN_ON(!HAS_PC8(dev));
6685 if (dev_priv->pc8.enabled)
6688 DRM_DEBUG_KMS("Enabling package C8+\n");
6690 dev_priv->pc8.enabled = true;
6692 if (dev_priv->pch_id == INTEL_PCH_LPT_LP_DEVICE_ID_TYPE) {
6693 val = I915_READ(SOUTH_DSPCLK_GATE_D);
6694 val &= ~PCH_LP_PARTITION_LEVEL_DISABLE;
6695 I915_WRITE(SOUTH_DSPCLK_GATE_D, val);
6698 lpt_disable_clkout_dp(dev);
6699 hsw_pc8_disable_interrupts(dev);
6700 hsw_disable_lcpll(dev_priv, true, true);
6702 intel_runtime_pm_put(dev_priv);
6705 static void __hsw_enable_package_c8(struct drm_i915_private *dev_priv)
6707 WARN_ON(!mutex_is_locked(&dev_priv->pc8.lock));
6708 WARN(dev_priv->pc8.disable_count < 1,
6709 "pc8.disable_count: %d\n", dev_priv->pc8.disable_count);
6711 dev_priv->pc8.disable_count--;
6712 if (dev_priv->pc8.disable_count != 0)
6715 schedule_delayed_work(&dev_priv->pc8.enable_work,
6716 msecs_to_jiffies(i915.pc8_timeout));
6719 static void __hsw_disable_package_c8(struct drm_i915_private *dev_priv)
6721 struct drm_device *dev = dev_priv->dev;
6724 WARN_ON(!mutex_is_locked(&dev_priv->pc8.lock));
6725 WARN(dev_priv->pc8.disable_count < 0,
6726 "pc8.disable_count: %d\n", dev_priv->pc8.disable_count);
6728 dev_priv->pc8.disable_count++;
6729 if (dev_priv->pc8.disable_count != 1)
6732 WARN_ON(!HAS_PC8(dev));
6734 cancel_delayed_work_sync(&dev_priv->pc8.enable_work);
6735 if (!dev_priv->pc8.enabled)
6738 DRM_DEBUG_KMS("Disabling package C8+\n");
6740 intel_runtime_pm_get(dev_priv);
6742 hsw_restore_lcpll(dev_priv);
6743 hsw_pc8_restore_interrupts(dev);
6744 lpt_init_pch_refclk(dev);
6746 if (dev_priv->pch_id == INTEL_PCH_LPT_LP_DEVICE_ID_TYPE) {
6747 val = I915_READ(SOUTH_DSPCLK_GATE_D);
6748 val |= PCH_LP_PARTITION_LEVEL_DISABLE;
6749 I915_WRITE(SOUTH_DSPCLK_GATE_D, val);
6752 intel_prepare_ddi(dev);
6753 i915_gem_init_swizzling(dev);
6754 mutex_lock(&dev_priv->rps.hw_lock);
6755 gen6_update_ring_freq(dev);
6756 mutex_unlock(&dev_priv->rps.hw_lock);
6757 dev_priv->pc8.enabled = false;
6760 void hsw_enable_package_c8(struct drm_i915_private *dev_priv)
6762 if (!HAS_PC8(dev_priv->dev))
6765 mutex_lock(&dev_priv->pc8.lock);
6766 __hsw_enable_package_c8(dev_priv);
6767 mutex_unlock(&dev_priv->pc8.lock);
6770 void hsw_disable_package_c8(struct drm_i915_private *dev_priv)
6772 if (!HAS_PC8(dev_priv->dev))
6775 mutex_lock(&dev_priv->pc8.lock);
6776 __hsw_disable_package_c8(dev_priv);
6777 mutex_unlock(&dev_priv->pc8.lock);
6780 static bool hsw_can_enable_package_c8(struct drm_i915_private *dev_priv)
6782 struct drm_device *dev = dev_priv->dev;
6783 struct intel_crtc *crtc;
6786 list_for_each_entry(crtc, &dev->mode_config.crtc_list, base.head)
6787 if (crtc->base.enabled)
6790 /* This case is still possible since we have the i915.disable_power_well
6791 * parameter and also the KVMr or something else might be requesting the
6793 val = I915_READ(HSW_PWR_WELL_DRIVER);
6795 DRM_DEBUG_KMS("Not enabling PC8: power well on\n");
6802 /* Since we're called from modeset_global_resources there's no way to
6803 * symmetrically increase and decrease the refcount, so we use
6804 * dev_priv->pc8.requirements_met to track whether we already have the refcount
6807 static void hsw_update_package_c8(struct drm_device *dev)
6809 struct drm_i915_private *dev_priv = dev->dev_private;
6812 if (!HAS_PC8(dev_priv->dev))
6815 if (!i915.enable_pc8)
6818 mutex_lock(&dev_priv->pc8.lock);
6820 allow = hsw_can_enable_package_c8(dev_priv);
6822 if (allow == dev_priv->pc8.requirements_met)
6825 dev_priv->pc8.requirements_met = allow;
6828 __hsw_enable_package_c8(dev_priv);
6830 __hsw_disable_package_c8(dev_priv);
6833 mutex_unlock(&dev_priv->pc8.lock);
6836 static void hsw_package_c8_gpu_idle(struct drm_i915_private *dev_priv)
6838 if (!HAS_PC8(dev_priv->dev))
6841 mutex_lock(&dev_priv->pc8.lock);
6842 if (!dev_priv->pc8.gpu_idle) {
6843 dev_priv->pc8.gpu_idle = true;
6844 __hsw_enable_package_c8(dev_priv);
6846 mutex_unlock(&dev_priv->pc8.lock);
6849 static void hsw_package_c8_gpu_busy(struct drm_i915_private *dev_priv)
6851 if (!HAS_PC8(dev_priv->dev))
6854 mutex_lock(&dev_priv->pc8.lock);
6855 if (dev_priv->pc8.gpu_idle) {
6856 dev_priv->pc8.gpu_idle = false;
6857 __hsw_disable_package_c8(dev_priv);
6859 mutex_unlock(&dev_priv->pc8.lock);
6862 #define for_each_power_domain(domain, mask) \
6863 for ((domain) = 0; (domain) < POWER_DOMAIN_NUM; (domain)++) \
6864 if ((1 << (domain)) & (mask))
6866 static unsigned long get_pipe_power_domains(struct drm_device *dev,
6867 enum pipe pipe, bool pfit_enabled)
6870 enum transcoder transcoder;
6872 transcoder = intel_pipe_to_cpu_transcoder(dev->dev_private, pipe);
6874 mask = BIT(POWER_DOMAIN_PIPE(pipe));
6875 mask |= BIT(POWER_DOMAIN_TRANSCODER(transcoder));
6877 mask |= BIT(POWER_DOMAIN_PIPE_PANEL_FITTER(pipe));
6882 void intel_display_set_init_power(struct drm_device *dev, bool enable)
6884 struct drm_i915_private *dev_priv = dev->dev_private;
6886 if (dev_priv->power_domains.init_power_on == enable)
6890 intel_display_power_get(dev, POWER_DOMAIN_INIT);
6892 intel_display_power_put(dev, POWER_DOMAIN_INIT);
6894 dev_priv->power_domains.init_power_on = enable;
6897 static void modeset_update_power_wells(struct drm_device *dev)
6899 unsigned long pipe_domains[I915_MAX_PIPES] = { 0, };
6900 struct intel_crtc *crtc;
6903 * First get all needed power domains, then put all unneeded, to avoid
6904 * any unnecessary toggling of the power wells.
6906 list_for_each_entry(crtc, &dev->mode_config.crtc_list, base.head) {
6907 enum intel_display_power_domain domain;
6909 if (!crtc->base.enabled)
6912 pipe_domains[crtc->pipe] = get_pipe_power_domains(dev,
6914 crtc->config.pch_pfit.enabled);
6916 for_each_power_domain(domain, pipe_domains[crtc->pipe])
6917 intel_display_power_get(dev, domain);
6920 list_for_each_entry(crtc, &dev->mode_config.crtc_list, base.head) {
6921 enum intel_display_power_domain domain;
6923 for_each_power_domain(domain, crtc->enabled_power_domains)
6924 intel_display_power_put(dev, domain);
6926 crtc->enabled_power_domains = pipe_domains[crtc->pipe];
6929 intel_display_set_init_power(dev, false);
6932 static void haswell_modeset_global_resources(struct drm_device *dev)
6934 modeset_update_power_wells(dev);
6935 hsw_update_package_c8(dev);
6938 static int haswell_crtc_mode_set(struct drm_crtc *crtc,
6940 struct drm_framebuffer *fb)
6942 struct drm_device *dev = crtc->dev;
6943 struct drm_i915_private *dev_priv = dev->dev_private;
6944 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
6945 int plane = intel_crtc->plane;
6948 if (!intel_ddi_pll_select(intel_crtc))
6950 intel_ddi_pll_enable(intel_crtc);
6952 if (intel_crtc->config.has_dp_encoder)
6953 intel_dp_set_m_n(intel_crtc);
6955 intel_crtc->lowfreq_avail = false;
6957 intel_set_pipe_timings(intel_crtc);
6959 if (intel_crtc->config.has_pch_encoder) {
6960 intel_cpu_transcoder_set_m_n(intel_crtc,
6961 &intel_crtc->config.fdi_m_n);
6964 haswell_set_pipeconf(crtc);
6966 intel_set_pipe_csc(crtc);
6968 /* Set up the display plane register */
6969 I915_WRITE(DSPCNTR(plane), DISPPLANE_GAMMA_ENABLE | DISPPLANE_PIPE_CSC_ENABLE);
6970 POSTING_READ(DSPCNTR(plane));
6972 ret = intel_pipe_set_base(crtc, x, y, fb);
6977 static bool haswell_get_pipe_config(struct intel_crtc *crtc,
6978 struct intel_crtc_config *pipe_config)
6980 struct drm_device *dev = crtc->base.dev;
6981 struct drm_i915_private *dev_priv = dev->dev_private;
6982 enum intel_display_power_domain pfit_domain;
6985 pipe_config->cpu_transcoder = (enum transcoder) crtc->pipe;
6986 pipe_config->shared_dpll = DPLL_ID_PRIVATE;
6988 tmp = I915_READ(TRANS_DDI_FUNC_CTL(TRANSCODER_EDP));
6989 if (tmp & TRANS_DDI_FUNC_ENABLE) {
6990 enum pipe trans_edp_pipe;
6991 switch (tmp & TRANS_DDI_EDP_INPUT_MASK) {
6993 WARN(1, "unknown pipe linked to edp transcoder\n");
6994 case TRANS_DDI_EDP_INPUT_A_ONOFF:
6995 case TRANS_DDI_EDP_INPUT_A_ON:
6996 trans_edp_pipe = PIPE_A;
6998 case TRANS_DDI_EDP_INPUT_B_ONOFF:
6999 trans_edp_pipe = PIPE_B;
7001 case TRANS_DDI_EDP_INPUT_C_ONOFF:
7002 trans_edp_pipe = PIPE_C;
7006 if (trans_edp_pipe == crtc->pipe)
7007 pipe_config->cpu_transcoder = TRANSCODER_EDP;
7010 if (!intel_display_power_enabled(dev,
7011 POWER_DOMAIN_TRANSCODER(pipe_config->cpu_transcoder)))
7014 tmp = I915_READ(PIPECONF(pipe_config->cpu_transcoder));
7015 if (!(tmp & PIPECONF_ENABLE))
7019 * Haswell has only FDI/PCH transcoder A. It is which is connected to
7020 * DDI E. So just check whether this pipe is wired to DDI E and whether
7021 * the PCH transcoder is on.
7023 tmp = I915_READ(TRANS_DDI_FUNC_CTL(pipe_config->cpu_transcoder));
7024 if ((tmp & TRANS_DDI_PORT_MASK) == TRANS_DDI_SELECT_PORT(PORT_E) &&
7025 I915_READ(LPT_TRANSCONF) & TRANS_ENABLE) {
7026 pipe_config->has_pch_encoder = true;
7028 tmp = I915_READ(FDI_RX_CTL(PIPE_A));
7029 pipe_config->fdi_lanes = ((FDI_DP_PORT_WIDTH_MASK & tmp) >>
7030 FDI_DP_PORT_WIDTH_SHIFT) + 1;
7032 ironlake_get_fdi_m_n_config(crtc, pipe_config);
7035 intel_get_pipe_timings(crtc, pipe_config);
7037 pfit_domain = POWER_DOMAIN_PIPE_PANEL_FITTER(crtc->pipe);
7038 if (intel_display_power_enabled(dev, pfit_domain))
7039 ironlake_get_pfit_config(crtc, pipe_config);
7041 if (IS_HASWELL(dev))
7042 pipe_config->ips_enabled = hsw_crtc_supports_ips(crtc) &&
7043 (I915_READ(IPS_CTL) & IPS_ENABLE);
7045 pipe_config->pixel_multiplier = 1;
7050 static int intel_crtc_mode_set(struct drm_crtc *crtc,
7052 struct drm_framebuffer *fb)
7054 struct drm_device *dev = crtc->dev;
7055 struct drm_i915_private *dev_priv = dev->dev_private;
7056 struct intel_encoder *encoder;
7057 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
7058 struct drm_display_mode *mode = &intel_crtc->config.requested_mode;
7059 int pipe = intel_crtc->pipe;
7062 drm_vblank_pre_modeset(dev, pipe);
7064 ret = dev_priv->display.crtc_mode_set(crtc, x, y, fb);
7066 drm_vblank_post_modeset(dev, pipe);
7071 for_each_encoder_on_crtc(dev, crtc, encoder) {
7072 DRM_DEBUG_KMS("[ENCODER:%d:%s] set [MODE:%d:%s]\n",
7073 encoder->base.base.id,
7074 drm_get_encoder_name(&encoder->base),
7075 mode->base.id, mode->name);
7076 encoder->mode_set(encoder);
7085 } hdmi_audio_clock[] = {
7086 { DIV_ROUND_UP(25200 * 1000, 1001), AUD_CONFIG_PIXEL_CLOCK_HDMI_25175 },
7087 { 25200, AUD_CONFIG_PIXEL_CLOCK_HDMI_25200 }, /* default per bspec */
7088 { 27000, AUD_CONFIG_PIXEL_CLOCK_HDMI_27000 },
7089 { 27000 * 1001 / 1000, AUD_CONFIG_PIXEL_CLOCK_HDMI_27027 },
7090 { 54000, AUD_CONFIG_PIXEL_CLOCK_HDMI_54000 },
7091 { 54000 * 1001 / 1000, AUD_CONFIG_PIXEL_CLOCK_HDMI_54054 },
7092 { DIV_ROUND_UP(74250 * 1000, 1001), AUD_CONFIG_PIXEL_CLOCK_HDMI_74176 },
7093 { 74250, AUD_CONFIG_PIXEL_CLOCK_HDMI_74250 },
7094 { DIV_ROUND_UP(148500 * 1000, 1001), AUD_CONFIG_PIXEL_CLOCK_HDMI_148352 },
7095 { 148500, AUD_CONFIG_PIXEL_CLOCK_HDMI_148500 },
7098 /* get AUD_CONFIG_PIXEL_CLOCK_HDMI_* value for mode */
7099 static u32 audio_config_hdmi_pixel_clock(struct drm_display_mode *mode)
7103 for (i = 0; i < ARRAY_SIZE(hdmi_audio_clock); i++) {
7104 if (mode->clock == hdmi_audio_clock[i].clock)
7108 if (i == ARRAY_SIZE(hdmi_audio_clock)) {
7109 DRM_DEBUG_KMS("HDMI audio pixel clock setting for %d not found, falling back to defaults\n", mode->clock);
7113 DRM_DEBUG_KMS("Configuring HDMI audio for pixel clock %d (0x%08x)\n",
7114 hdmi_audio_clock[i].clock,
7115 hdmi_audio_clock[i].config);
7117 return hdmi_audio_clock[i].config;
7120 static bool intel_eld_uptodate(struct drm_connector *connector,
7121 int reg_eldv, uint32_t bits_eldv,
7122 int reg_elda, uint32_t bits_elda,
7125 struct drm_i915_private *dev_priv = connector->dev->dev_private;
7126 uint8_t *eld = connector->eld;
7129 i = I915_READ(reg_eldv);
7138 i = I915_READ(reg_elda);
7140 I915_WRITE(reg_elda, i);
7142 for (i = 0; i < eld[2]; i++)
7143 if (I915_READ(reg_edid) != *((uint32_t *)eld + i))
7149 static void g4x_write_eld(struct drm_connector *connector,
7150 struct drm_crtc *crtc,
7151 struct drm_display_mode *mode)
7153 struct drm_i915_private *dev_priv = connector->dev->dev_private;
7154 uint8_t *eld = connector->eld;
7159 i = I915_READ(G4X_AUD_VID_DID);
7161 if (i == INTEL_AUDIO_DEVBLC || i == INTEL_AUDIO_DEVCL)
7162 eldv = G4X_ELDV_DEVCL_DEVBLC;
7164 eldv = G4X_ELDV_DEVCTG;
7166 if (intel_eld_uptodate(connector,
7167 G4X_AUD_CNTL_ST, eldv,
7168 G4X_AUD_CNTL_ST, G4X_ELD_ADDR,
7169 G4X_HDMIW_HDMIEDID))
7172 i = I915_READ(G4X_AUD_CNTL_ST);
7173 i &= ~(eldv | G4X_ELD_ADDR);
7174 len = (i >> 9) & 0x1f; /* ELD buffer size */
7175 I915_WRITE(G4X_AUD_CNTL_ST, i);
7180 len = min_t(uint8_t, eld[2], len);
7181 DRM_DEBUG_DRIVER("ELD size %d\n", len);
7182 for (i = 0; i < len; i++)
7183 I915_WRITE(G4X_HDMIW_HDMIEDID, *((uint32_t *)eld + i));
7185 i = I915_READ(G4X_AUD_CNTL_ST);
7187 I915_WRITE(G4X_AUD_CNTL_ST, i);
7190 static void haswell_write_eld(struct drm_connector *connector,
7191 struct drm_crtc *crtc,
7192 struct drm_display_mode *mode)
7194 struct drm_i915_private *dev_priv = connector->dev->dev_private;
7195 uint8_t *eld = connector->eld;
7196 struct drm_device *dev = crtc->dev;
7197 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
7201 int pipe = to_intel_crtc(crtc)->pipe;
7204 int hdmiw_hdmiedid = HSW_AUD_EDID_DATA(pipe);
7205 int aud_cntl_st = HSW_AUD_DIP_ELD_CTRL(pipe);
7206 int aud_config = HSW_AUD_CFG(pipe);
7207 int aud_cntrl_st2 = HSW_AUD_PIN_ELD_CP_VLD;
7210 DRM_DEBUG_DRIVER("HDMI: Haswell Audio initialize....\n");
7212 /* Audio output enable */
7213 DRM_DEBUG_DRIVER("HDMI audio: enable codec\n");
7214 tmp = I915_READ(aud_cntrl_st2);
7215 tmp |= (AUDIO_OUTPUT_ENABLE_A << (pipe * 4));
7216 I915_WRITE(aud_cntrl_st2, tmp);
7218 /* Wait for 1 vertical blank */
7219 intel_wait_for_vblank(dev, pipe);
7221 /* Set ELD valid state */
7222 tmp = I915_READ(aud_cntrl_st2);
7223 DRM_DEBUG_DRIVER("HDMI audio: pin eld vld status=0x%08x\n", tmp);
7224 tmp |= (AUDIO_ELD_VALID_A << (pipe * 4));
7225 I915_WRITE(aud_cntrl_st2, tmp);
7226 tmp = I915_READ(aud_cntrl_st2);
7227 DRM_DEBUG_DRIVER("HDMI audio: eld vld status=0x%08x\n", tmp);
7229 /* Enable HDMI mode */
7230 tmp = I915_READ(aud_config);
7231 DRM_DEBUG_DRIVER("HDMI audio: audio conf: 0x%08x\n", tmp);
7232 /* clear N_programing_enable and N_value_index */
7233 tmp &= ~(AUD_CONFIG_N_VALUE_INDEX | AUD_CONFIG_N_PROG_ENABLE);
7234 I915_WRITE(aud_config, tmp);
7236 DRM_DEBUG_DRIVER("ELD on pipe %c\n", pipe_name(pipe));
7238 eldv = AUDIO_ELD_VALID_A << (pipe * 4);
7239 intel_crtc->eld_vld = true;
7241 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT)) {
7242 DRM_DEBUG_DRIVER("ELD: DisplayPort detected\n");
7243 eld[5] |= (1 << 2); /* Conn_Type, 0x1 = DisplayPort */
7244 I915_WRITE(aud_config, AUD_CONFIG_N_VALUE_INDEX); /* 0x1 = DP */
7246 I915_WRITE(aud_config, audio_config_hdmi_pixel_clock(mode));
7249 if (intel_eld_uptodate(connector,
7250 aud_cntrl_st2, eldv,
7251 aud_cntl_st, IBX_ELD_ADDRESS,
7255 i = I915_READ(aud_cntrl_st2);
7257 I915_WRITE(aud_cntrl_st2, i);
7262 i = I915_READ(aud_cntl_st);
7263 i &= ~IBX_ELD_ADDRESS;
7264 I915_WRITE(aud_cntl_st, i);
7265 i = (i >> 29) & DIP_PORT_SEL_MASK; /* DIP_Port_Select, 0x1 = PortB */
7266 DRM_DEBUG_DRIVER("port num:%d\n", i);
7268 len = min_t(uint8_t, eld[2], 21); /* 84 bytes of hw ELD buffer */
7269 DRM_DEBUG_DRIVER("ELD size %d\n", len);
7270 for (i = 0; i < len; i++)
7271 I915_WRITE(hdmiw_hdmiedid, *((uint32_t *)eld + i));
7273 i = I915_READ(aud_cntrl_st2);
7275 I915_WRITE(aud_cntrl_st2, i);
7279 static void ironlake_write_eld(struct drm_connector *connector,
7280 struct drm_crtc *crtc,
7281 struct drm_display_mode *mode)
7283 struct drm_i915_private *dev_priv = connector->dev->dev_private;
7284 uint8_t *eld = connector->eld;
7292 int pipe = to_intel_crtc(crtc)->pipe;
7294 if (HAS_PCH_IBX(connector->dev)) {
7295 hdmiw_hdmiedid = IBX_HDMIW_HDMIEDID(pipe);
7296 aud_config = IBX_AUD_CFG(pipe);
7297 aud_cntl_st = IBX_AUD_CNTL_ST(pipe);
7298 aud_cntrl_st2 = IBX_AUD_CNTL_ST2;
7299 } else if (IS_VALLEYVIEW(connector->dev)) {
7300 hdmiw_hdmiedid = VLV_HDMIW_HDMIEDID(pipe);
7301 aud_config = VLV_AUD_CFG(pipe);
7302 aud_cntl_st = VLV_AUD_CNTL_ST(pipe);
7303 aud_cntrl_st2 = VLV_AUD_CNTL_ST2;
7305 hdmiw_hdmiedid = CPT_HDMIW_HDMIEDID(pipe);
7306 aud_config = CPT_AUD_CFG(pipe);
7307 aud_cntl_st = CPT_AUD_CNTL_ST(pipe);
7308 aud_cntrl_st2 = CPT_AUD_CNTRL_ST2;
7311 DRM_DEBUG_DRIVER("ELD on pipe %c\n", pipe_name(pipe));
7313 if (IS_VALLEYVIEW(connector->dev)) {
7314 struct intel_encoder *intel_encoder;
7315 struct intel_digital_port *intel_dig_port;
7317 intel_encoder = intel_attached_encoder(connector);
7318 intel_dig_port = enc_to_dig_port(&intel_encoder->base);
7319 i = intel_dig_port->port;
7321 i = I915_READ(aud_cntl_st);
7322 i = (i >> 29) & DIP_PORT_SEL_MASK;
7323 /* DIP_Port_Select, 0x1 = PortB */
7327 DRM_DEBUG_DRIVER("Audio directed to unknown port\n");
7328 /* operate blindly on all ports */
7329 eldv = IBX_ELD_VALIDB;
7330 eldv |= IBX_ELD_VALIDB << 4;
7331 eldv |= IBX_ELD_VALIDB << 8;
7333 DRM_DEBUG_DRIVER("ELD on port %c\n", port_name(i));
7334 eldv = IBX_ELD_VALIDB << ((i - 1) * 4);
7337 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT)) {
7338 DRM_DEBUG_DRIVER("ELD: DisplayPort detected\n");
7339 eld[5] |= (1 << 2); /* Conn_Type, 0x1 = DisplayPort */
7340 I915_WRITE(aud_config, AUD_CONFIG_N_VALUE_INDEX); /* 0x1 = DP */
7342 I915_WRITE(aud_config, audio_config_hdmi_pixel_clock(mode));
7345 if (intel_eld_uptodate(connector,
7346 aud_cntrl_st2, eldv,
7347 aud_cntl_st, IBX_ELD_ADDRESS,
7351 i = I915_READ(aud_cntrl_st2);
7353 I915_WRITE(aud_cntrl_st2, i);
7358 i = I915_READ(aud_cntl_st);
7359 i &= ~IBX_ELD_ADDRESS;
7360 I915_WRITE(aud_cntl_st, i);
7362 len = min_t(uint8_t, eld[2], 21); /* 84 bytes of hw ELD buffer */
7363 DRM_DEBUG_DRIVER("ELD size %d\n", len);
7364 for (i = 0; i < len; i++)
7365 I915_WRITE(hdmiw_hdmiedid, *((uint32_t *)eld + i));
7367 i = I915_READ(aud_cntrl_st2);
7369 I915_WRITE(aud_cntrl_st2, i);
7372 void intel_write_eld(struct drm_encoder *encoder,
7373 struct drm_display_mode *mode)
7375 struct drm_crtc *crtc = encoder->crtc;
7376 struct drm_connector *connector;
7377 struct drm_device *dev = encoder->dev;
7378 struct drm_i915_private *dev_priv = dev->dev_private;
7380 connector = drm_select_eld(encoder, mode);
7384 DRM_DEBUG_DRIVER("ELD on [CONNECTOR:%d:%s], [ENCODER:%d:%s]\n",
7386 drm_get_connector_name(connector),
7387 connector->encoder->base.id,
7388 drm_get_encoder_name(connector->encoder));
7390 connector->eld[6] = drm_av_sync_delay(connector, mode) / 2;
7392 if (dev_priv->display.write_eld)
7393 dev_priv->display.write_eld(connector, crtc, mode);
7396 static void i845_update_cursor(struct drm_crtc *crtc, u32 base)
7398 struct drm_device *dev = crtc->dev;
7399 struct drm_i915_private *dev_priv = dev->dev_private;
7400 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
7401 bool visible = base != 0;
7404 if (intel_crtc->cursor_visible == visible)
7407 cntl = I915_READ(_CURACNTR);
7409 /* On these chipsets we can only modify the base whilst
7410 * the cursor is disabled.
7412 I915_WRITE(_CURABASE, base);
7414 cntl &= ~(CURSOR_FORMAT_MASK);
7415 /* XXX width must be 64, stride 256 => 0x00 << 28 */
7416 cntl |= CURSOR_ENABLE |
7417 CURSOR_GAMMA_ENABLE |
7420 cntl &= ~(CURSOR_ENABLE | CURSOR_GAMMA_ENABLE);
7421 I915_WRITE(_CURACNTR, cntl);
7423 intel_crtc->cursor_visible = visible;
7426 static void i9xx_update_cursor(struct drm_crtc *crtc, u32 base)
7428 struct drm_device *dev = crtc->dev;
7429 struct drm_i915_private *dev_priv = dev->dev_private;
7430 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
7431 int pipe = intel_crtc->pipe;
7432 bool visible = base != 0;
7434 if (intel_crtc->cursor_visible != visible) {
7435 uint32_t cntl = I915_READ(CURCNTR(pipe));
7437 cntl &= ~(CURSOR_MODE | MCURSOR_PIPE_SELECT);
7438 cntl |= CURSOR_MODE_64_ARGB_AX | MCURSOR_GAMMA_ENABLE;
7439 cntl |= pipe << 28; /* Connect to correct pipe */
7441 cntl &= ~(CURSOR_MODE | MCURSOR_GAMMA_ENABLE);
7442 cntl |= CURSOR_MODE_DISABLE;
7444 I915_WRITE(CURCNTR(pipe), cntl);
7446 intel_crtc->cursor_visible = visible;
7448 /* and commit changes on next vblank */
7449 POSTING_READ(CURCNTR(pipe));
7450 I915_WRITE(CURBASE(pipe), base);
7451 POSTING_READ(CURBASE(pipe));
7454 static void ivb_update_cursor(struct drm_crtc *crtc, u32 base)
7456 struct drm_device *dev = crtc->dev;
7457 struct drm_i915_private *dev_priv = dev->dev_private;
7458 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
7459 int pipe = intel_crtc->pipe;
7460 bool visible = base != 0;
7462 if (intel_crtc->cursor_visible != visible) {
7463 uint32_t cntl = I915_READ(CURCNTR_IVB(pipe));
7465 cntl &= ~CURSOR_MODE;
7466 cntl |= CURSOR_MODE_64_ARGB_AX | MCURSOR_GAMMA_ENABLE;
7468 cntl &= ~(CURSOR_MODE | MCURSOR_GAMMA_ENABLE);
7469 cntl |= CURSOR_MODE_DISABLE;
7471 if (IS_HASWELL(dev) || IS_BROADWELL(dev)) {
7472 cntl |= CURSOR_PIPE_CSC_ENABLE;
7473 cntl &= ~CURSOR_TRICKLE_FEED_DISABLE;
7475 I915_WRITE(CURCNTR_IVB(pipe), cntl);
7477 intel_crtc->cursor_visible = visible;
7479 /* and commit changes on next vblank */
7480 POSTING_READ(CURCNTR_IVB(pipe));
7481 I915_WRITE(CURBASE_IVB(pipe), base);
7482 POSTING_READ(CURBASE_IVB(pipe));
7485 /* If no-part of the cursor is visible on the framebuffer, then the GPU may hang... */
7486 static void intel_crtc_update_cursor(struct drm_crtc *crtc,
7489 struct drm_device *dev = crtc->dev;
7490 struct drm_i915_private *dev_priv = dev->dev_private;
7491 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
7492 int pipe = intel_crtc->pipe;
7493 int x = intel_crtc->cursor_x;
7494 int y = intel_crtc->cursor_y;
7495 u32 base = 0, pos = 0;
7499 base = intel_crtc->cursor_addr;
7501 if (x >= intel_crtc->config.pipe_src_w)
7504 if (y >= intel_crtc->config.pipe_src_h)
7508 if (x + intel_crtc->cursor_width <= 0)
7511 pos |= CURSOR_POS_SIGN << CURSOR_X_SHIFT;
7514 pos |= x << CURSOR_X_SHIFT;
7517 if (y + intel_crtc->cursor_height <= 0)
7520 pos |= CURSOR_POS_SIGN << CURSOR_Y_SHIFT;
7523 pos |= y << CURSOR_Y_SHIFT;
7525 visible = base != 0;
7526 if (!visible && !intel_crtc->cursor_visible)
7529 if (IS_IVYBRIDGE(dev) || IS_HASWELL(dev) || IS_BROADWELL(dev)) {
7530 I915_WRITE(CURPOS_IVB(pipe), pos);
7531 ivb_update_cursor(crtc, base);
7533 I915_WRITE(CURPOS(pipe), pos);
7534 if (IS_845G(dev) || IS_I865G(dev))
7535 i845_update_cursor(crtc, base);
7537 i9xx_update_cursor(crtc, base);
7541 static int intel_crtc_cursor_set(struct drm_crtc *crtc,
7542 struct drm_file *file,
7544 uint32_t width, uint32_t height)
7546 struct drm_device *dev = crtc->dev;
7547 struct drm_i915_private *dev_priv = dev->dev_private;
7548 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
7549 struct drm_i915_gem_object *obj;
7553 /* if we want to turn off the cursor ignore width and height */
7555 DRM_DEBUG_KMS("cursor off\n");
7558 mutex_lock(&dev->struct_mutex);
7562 /* Currently we only support 64x64 cursors */
7563 if (width != 64 || height != 64) {
7564 DRM_ERROR("we currently only support 64x64 cursors\n");
7568 obj = to_intel_bo(drm_gem_object_lookup(dev, file, handle));
7569 if (&obj->base == NULL)
7572 if (obj->base.size < width * height * 4) {
7573 DRM_ERROR("buffer is to small\n");
7578 /* we only need to pin inside GTT if cursor is non-phy */
7579 mutex_lock(&dev->struct_mutex);
7580 if (!dev_priv->info->cursor_needs_physical) {
7583 if (obj->tiling_mode) {
7584 DRM_ERROR("cursor cannot be tiled\n");
7589 /* Note that the w/a also requires 2 PTE of padding following
7590 * the bo. We currently fill all unused PTE with the shadow
7591 * page and so we should always have valid PTE following the
7592 * cursor preventing the VT-d warning.
7595 if (need_vtd_wa(dev))
7596 alignment = 64*1024;
7598 ret = i915_gem_object_pin_to_display_plane(obj, alignment, NULL);
7600 DRM_ERROR("failed to move cursor bo into the GTT\n");
7604 ret = i915_gem_object_put_fence(obj);
7606 DRM_ERROR("failed to release fence for cursor");
7610 addr = i915_gem_obj_ggtt_offset(obj);
7612 int align = IS_I830(dev) ? 16 * 1024 : 256;
7613 ret = i915_gem_attach_phys_object(dev, obj,
7614 (intel_crtc->pipe == 0) ? I915_GEM_PHYS_CURSOR_0 : I915_GEM_PHYS_CURSOR_1,
7617 DRM_ERROR("failed to attach phys object\n");
7620 addr = obj->phys_obj->handle->busaddr;
7624 I915_WRITE(CURSIZE, (height << 12) | width);
7627 if (intel_crtc->cursor_bo) {
7628 if (dev_priv->info->cursor_needs_physical) {
7629 if (intel_crtc->cursor_bo != obj)
7630 i915_gem_detach_phys_object(dev, intel_crtc->cursor_bo);
7632 i915_gem_object_unpin_from_display_plane(intel_crtc->cursor_bo);
7633 drm_gem_object_unreference(&intel_crtc->cursor_bo->base);
7636 mutex_unlock(&dev->struct_mutex);
7638 intel_crtc->cursor_addr = addr;
7639 intel_crtc->cursor_bo = obj;
7640 intel_crtc->cursor_width = width;
7641 intel_crtc->cursor_height = height;
7643 if (intel_crtc->active)
7644 intel_crtc_update_cursor(crtc, intel_crtc->cursor_bo != NULL);
7648 i915_gem_object_unpin_from_display_plane(obj);
7650 mutex_unlock(&dev->struct_mutex);
7652 drm_gem_object_unreference_unlocked(&obj->base);
7656 static int intel_crtc_cursor_move(struct drm_crtc *crtc, int x, int y)
7658 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
7660 intel_crtc->cursor_x = clamp_t(int, x, SHRT_MIN, SHRT_MAX);
7661 intel_crtc->cursor_y = clamp_t(int, y, SHRT_MIN, SHRT_MAX);
7663 if (intel_crtc->active)
7664 intel_crtc_update_cursor(crtc, intel_crtc->cursor_bo != NULL);
7669 static void intel_crtc_gamma_set(struct drm_crtc *crtc, u16 *red, u16 *green,
7670 u16 *blue, uint32_t start, uint32_t size)
7672 int end = (start + size > 256) ? 256 : start + size, i;
7673 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
7675 for (i = start; i < end; i++) {
7676 intel_crtc->lut_r[i] = red[i] >> 8;
7677 intel_crtc->lut_g[i] = green[i] >> 8;
7678 intel_crtc->lut_b[i] = blue[i] >> 8;
7681 intel_crtc_load_lut(crtc);
7684 /* VESA 640x480x72Hz mode to set on the pipe */
7685 static struct drm_display_mode load_detect_mode = {
7686 DRM_MODE("640x480", DRM_MODE_TYPE_DEFAULT, 31500, 640, 664,
7687 704, 832, 0, 480, 489, 491, 520, 0, DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC),
7690 static struct drm_framebuffer *
7691 intel_framebuffer_create(struct drm_device *dev,
7692 struct drm_mode_fb_cmd2 *mode_cmd,
7693 struct drm_i915_gem_object *obj)
7695 struct intel_framebuffer *intel_fb;
7698 intel_fb = kzalloc(sizeof(*intel_fb), GFP_KERNEL);
7700 drm_gem_object_unreference_unlocked(&obj->base);
7701 return ERR_PTR(-ENOMEM);
7704 ret = i915_mutex_lock_interruptible(dev);
7708 ret = intel_framebuffer_init(dev, intel_fb, mode_cmd, obj);
7709 mutex_unlock(&dev->struct_mutex);
7713 return &intel_fb->base;
7715 drm_gem_object_unreference_unlocked(&obj->base);
7718 return ERR_PTR(ret);
7722 intel_framebuffer_pitch_for_width(int width, int bpp)
7724 u32 pitch = DIV_ROUND_UP(width * bpp, 8);
7725 return ALIGN(pitch, 64);
7729 intel_framebuffer_size_for_mode(struct drm_display_mode *mode, int bpp)
7731 u32 pitch = intel_framebuffer_pitch_for_width(mode->hdisplay, bpp);
7732 return ALIGN(pitch * mode->vdisplay, PAGE_SIZE);
7735 static struct drm_framebuffer *
7736 intel_framebuffer_create_for_mode(struct drm_device *dev,
7737 struct drm_display_mode *mode,
7740 struct drm_i915_gem_object *obj;
7741 struct drm_mode_fb_cmd2 mode_cmd = { 0 };
7743 obj = i915_gem_alloc_object(dev,
7744 intel_framebuffer_size_for_mode(mode, bpp));
7746 return ERR_PTR(-ENOMEM);
7748 mode_cmd.width = mode->hdisplay;
7749 mode_cmd.height = mode->vdisplay;
7750 mode_cmd.pitches[0] = intel_framebuffer_pitch_for_width(mode_cmd.width,
7752 mode_cmd.pixel_format = drm_mode_legacy_fb_format(bpp, depth);
7754 return intel_framebuffer_create(dev, &mode_cmd, obj);
7757 static struct drm_framebuffer *
7758 mode_fits_in_fbdev(struct drm_device *dev,
7759 struct drm_display_mode *mode)
7761 #ifdef CONFIG_DRM_I915_FBDEV
7762 struct drm_i915_private *dev_priv = dev->dev_private;
7763 struct drm_i915_gem_object *obj;
7764 struct drm_framebuffer *fb;
7766 if (dev_priv->fbdev == NULL)
7769 obj = dev_priv->fbdev->ifb.obj;
7773 fb = &dev_priv->fbdev->ifb.base;
7774 if (fb->pitches[0] < intel_framebuffer_pitch_for_width(mode->hdisplay,
7775 fb->bits_per_pixel))
7778 if (obj->base.size < mode->vdisplay * fb->pitches[0])
7787 bool intel_get_load_detect_pipe(struct drm_connector *connector,
7788 struct drm_display_mode *mode,
7789 struct intel_load_detect_pipe *old)
7791 struct intel_crtc *intel_crtc;
7792 struct intel_encoder *intel_encoder =
7793 intel_attached_encoder(connector);
7794 struct drm_crtc *possible_crtc;
7795 struct drm_encoder *encoder = &intel_encoder->base;
7796 struct drm_crtc *crtc = NULL;
7797 struct drm_device *dev = encoder->dev;
7798 struct drm_framebuffer *fb;
7801 DRM_DEBUG_KMS("[CONNECTOR:%d:%s], [ENCODER:%d:%s]\n",
7802 connector->base.id, drm_get_connector_name(connector),
7803 encoder->base.id, drm_get_encoder_name(encoder));
7806 * Algorithm gets a little messy:
7808 * - if the connector already has an assigned crtc, use it (but make
7809 * sure it's on first)
7811 * - try to find the first unused crtc that can drive this connector,
7812 * and use that if we find one
7815 /* See if we already have a CRTC for this connector */
7816 if (encoder->crtc) {
7817 crtc = encoder->crtc;
7819 mutex_lock(&crtc->mutex);
7821 old->dpms_mode = connector->dpms;
7822 old->load_detect_temp = false;
7824 /* Make sure the crtc and connector are running */
7825 if (connector->dpms != DRM_MODE_DPMS_ON)
7826 connector->funcs->dpms(connector, DRM_MODE_DPMS_ON);
7831 /* Find an unused one (if possible) */
7832 list_for_each_entry(possible_crtc, &dev->mode_config.crtc_list, head) {
7834 if (!(encoder->possible_crtcs & (1 << i)))
7836 if (!possible_crtc->enabled) {
7837 crtc = possible_crtc;
7843 * If we didn't find an unused CRTC, don't use any.
7846 DRM_DEBUG_KMS("no pipe available for load-detect\n");
7850 mutex_lock(&crtc->mutex);
7851 intel_encoder->new_crtc = to_intel_crtc(crtc);
7852 to_intel_connector(connector)->new_encoder = intel_encoder;
7854 intel_crtc = to_intel_crtc(crtc);
7855 intel_crtc->new_enabled = true;
7856 intel_crtc->new_config = &intel_crtc->config;
7857 old->dpms_mode = connector->dpms;
7858 old->load_detect_temp = true;
7859 old->release_fb = NULL;
7862 mode = &load_detect_mode;
7864 /* We need a framebuffer large enough to accommodate all accesses
7865 * that the plane may generate whilst we perform load detection.
7866 * We can not rely on the fbcon either being present (we get called
7867 * during its initialisation to detect all boot displays, or it may
7868 * not even exist) or that it is large enough to satisfy the
7871 fb = mode_fits_in_fbdev(dev, mode);
7873 DRM_DEBUG_KMS("creating tmp fb for load-detection\n");
7874 fb = intel_framebuffer_create_for_mode(dev, mode, 24, 32);
7875 old->release_fb = fb;
7877 DRM_DEBUG_KMS("reusing fbdev for load-detection framebuffer\n");
7879 DRM_DEBUG_KMS("failed to allocate framebuffer for load-detection\n");
7883 if (intel_set_mode(crtc, mode, 0, 0, fb)) {
7884 DRM_DEBUG_KMS("failed to set mode on load-detect pipe\n");
7885 if (old->release_fb)
7886 old->release_fb->funcs->destroy(old->release_fb);
7890 /* let the connector get through one full cycle before testing */
7891 intel_wait_for_vblank(dev, intel_crtc->pipe);
7895 intel_crtc->new_enabled = crtc->enabled;
7896 if (intel_crtc->new_enabled)
7897 intel_crtc->new_config = &intel_crtc->config;
7899 intel_crtc->new_config = NULL;
7900 mutex_unlock(&crtc->mutex);
7904 void intel_release_load_detect_pipe(struct drm_connector *connector,
7905 struct intel_load_detect_pipe *old)
7907 struct intel_encoder *intel_encoder =
7908 intel_attached_encoder(connector);
7909 struct drm_encoder *encoder = &intel_encoder->base;
7910 struct drm_crtc *crtc = encoder->crtc;
7911 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
7913 DRM_DEBUG_KMS("[CONNECTOR:%d:%s], [ENCODER:%d:%s]\n",
7914 connector->base.id, drm_get_connector_name(connector),
7915 encoder->base.id, drm_get_encoder_name(encoder));
7917 if (old->load_detect_temp) {
7918 to_intel_connector(connector)->new_encoder = NULL;
7919 intel_encoder->new_crtc = NULL;
7920 intel_crtc->new_enabled = false;
7921 intel_crtc->new_config = NULL;
7922 intel_set_mode(crtc, NULL, 0, 0, NULL);
7924 if (old->release_fb) {
7925 drm_framebuffer_unregister_private(old->release_fb);
7926 drm_framebuffer_unreference(old->release_fb);
7929 mutex_unlock(&crtc->mutex);
7933 /* Switch crtc and encoder back off if necessary */
7934 if (old->dpms_mode != DRM_MODE_DPMS_ON)
7935 connector->funcs->dpms(connector, old->dpms_mode);
7937 mutex_unlock(&crtc->mutex);
7940 static int i9xx_pll_refclk(struct drm_device *dev,
7941 const struct intel_crtc_config *pipe_config)
7943 struct drm_i915_private *dev_priv = dev->dev_private;
7944 u32 dpll = pipe_config->dpll_hw_state.dpll;
7946 if ((dpll & PLL_REF_INPUT_MASK) == PLLB_REF_INPUT_SPREADSPECTRUMIN)
7947 return dev_priv->vbt.lvds_ssc_freq;
7948 else if (HAS_PCH_SPLIT(dev))
7950 else if (!IS_GEN2(dev))
7956 /* Returns the clock of the currently programmed mode of the given pipe. */
7957 static void i9xx_crtc_clock_get(struct intel_crtc *crtc,
7958 struct intel_crtc_config *pipe_config)
7960 struct drm_device *dev = crtc->base.dev;
7961 struct drm_i915_private *dev_priv = dev->dev_private;
7962 int pipe = pipe_config->cpu_transcoder;
7963 u32 dpll = pipe_config->dpll_hw_state.dpll;
7965 intel_clock_t clock;
7966 int refclk = i9xx_pll_refclk(dev, pipe_config);
7968 if ((dpll & DISPLAY_RATE_SELECT_FPA1) == 0)
7969 fp = pipe_config->dpll_hw_state.fp0;
7971 fp = pipe_config->dpll_hw_state.fp1;
7973 clock.m1 = (fp & FP_M1_DIV_MASK) >> FP_M1_DIV_SHIFT;
7974 if (IS_PINEVIEW(dev)) {
7975 clock.n = ffs((fp & FP_N_PINEVIEW_DIV_MASK) >> FP_N_DIV_SHIFT) - 1;
7976 clock.m2 = (fp & FP_M2_PINEVIEW_DIV_MASK) >> FP_M2_DIV_SHIFT;
7978 clock.n = (fp & FP_N_DIV_MASK) >> FP_N_DIV_SHIFT;
7979 clock.m2 = (fp & FP_M2_DIV_MASK) >> FP_M2_DIV_SHIFT;
7982 if (!IS_GEN2(dev)) {
7983 if (IS_PINEVIEW(dev))
7984 clock.p1 = ffs((dpll & DPLL_FPA01_P1_POST_DIV_MASK_PINEVIEW) >>
7985 DPLL_FPA01_P1_POST_DIV_SHIFT_PINEVIEW);
7987 clock.p1 = ffs((dpll & DPLL_FPA01_P1_POST_DIV_MASK) >>
7988 DPLL_FPA01_P1_POST_DIV_SHIFT);
7990 switch (dpll & DPLL_MODE_MASK) {
7991 case DPLLB_MODE_DAC_SERIAL:
7992 clock.p2 = dpll & DPLL_DAC_SERIAL_P2_CLOCK_DIV_5 ?
7995 case DPLLB_MODE_LVDS:
7996 clock.p2 = dpll & DPLLB_LVDS_P2_CLOCK_DIV_7 ?
8000 DRM_DEBUG_KMS("Unknown DPLL mode %08x in programmed "
8001 "mode\n", (int)(dpll & DPLL_MODE_MASK));
8005 if (IS_PINEVIEW(dev))
8006 pineview_clock(refclk, &clock);
8008 i9xx_clock(refclk, &clock);
8010 u32 lvds = IS_I830(dev) ? 0 : I915_READ(LVDS);
8011 bool is_lvds = (pipe == 1) && (lvds & LVDS_PORT_EN);
8014 clock.p1 = ffs((dpll & DPLL_FPA01_P1_POST_DIV_MASK_I830_LVDS) >>
8015 DPLL_FPA01_P1_POST_DIV_SHIFT);
8017 if (lvds & LVDS_CLKB_POWER_UP)
8022 if (dpll & PLL_P1_DIVIDE_BY_TWO)
8025 clock.p1 = ((dpll & DPLL_FPA01_P1_POST_DIV_MASK_I830) >>
8026 DPLL_FPA01_P1_POST_DIV_SHIFT) + 2;
8028 if (dpll & PLL_P2_DIVIDE_BY_4)
8034 i9xx_clock(refclk, &clock);
8038 * This value includes pixel_multiplier. We will use
8039 * port_clock to compute adjusted_mode.crtc_clock in the
8040 * encoder's get_config() function.
8042 pipe_config->port_clock = clock.dot;
8045 int intel_dotclock_calculate(int link_freq,
8046 const struct intel_link_m_n *m_n)
8049 * The calculation for the data clock is:
8050 * pixel_clock = ((m/n)*(link_clock * nr_lanes))/bpp
8051 * But we want to avoid losing precison if possible, so:
8052 * pixel_clock = ((m * link_clock * nr_lanes)/(n*bpp))
8054 * and the link clock is simpler:
8055 * link_clock = (m * link_clock) / n
8061 return div_u64((u64)m_n->link_m * link_freq, m_n->link_n);
8064 static void ironlake_pch_clock_get(struct intel_crtc *crtc,
8065 struct intel_crtc_config *pipe_config)
8067 struct drm_device *dev = crtc->base.dev;
8069 /* read out port_clock from the DPLL */
8070 i9xx_crtc_clock_get(crtc, pipe_config);
8073 * This value does not include pixel_multiplier.
8074 * We will check that port_clock and adjusted_mode.crtc_clock
8075 * agree once we know their relationship in the encoder's
8076 * get_config() function.
8078 pipe_config->adjusted_mode.crtc_clock =
8079 intel_dotclock_calculate(intel_fdi_link_freq(dev) * 10000,
8080 &pipe_config->fdi_m_n);
8083 /** Returns the currently programmed mode of the given pipe. */
8084 struct drm_display_mode *intel_crtc_mode_get(struct drm_device *dev,
8085 struct drm_crtc *crtc)
8087 struct drm_i915_private *dev_priv = dev->dev_private;
8088 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
8089 enum transcoder cpu_transcoder = intel_crtc->config.cpu_transcoder;
8090 struct drm_display_mode *mode;
8091 struct intel_crtc_config pipe_config;
8092 int htot = I915_READ(HTOTAL(cpu_transcoder));
8093 int hsync = I915_READ(HSYNC(cpu_transcoder));
8094 int vtot = I915_READ(VTOTAL(cpu_transcoder));
8095 int vsync = I915_READ(VSYNC(cpu_transcoder));
8096 enum pipe pipe = intel_crtc->pipe;
8098 mode = kzalloc(sizeof(*mode), GFP_KERNEL);
8103 * Construct a pipe_config sufficient for getting the clock info
8104 * back out of crtc_clock_get.
8106 * Note, if LVDS ever uses a non-1 pixel multiplier, we'll need
8107 * to use a real value here instead.
8109 pipe_config.cpu_transcoder = (enum transcoder) pipe;
8110 pipe_config.pixel_multiplier = 1;
8111 pipe_config.dpll_hw_state.dpll = I915_READ(DPLL(pipe));
8112 pipe_config.dpll_hw_state.fp0 = I915_READ(FP0(pipe));
8113 pipe_config.dpll_hw_state.fp1 = I915_READ(FP1(pipe));
8114 i9xx_crtc_clock_get(intel_crtc, &pipe_config);
8116 mode->clock = pipe_config.port_clock / pipe_config.pixel_multiplier;
8117 mode->hdisplay = (htot & 0xffff) + 1;
8118 mode->htotal = ((htot & 0xffff0000) >> 16) + 1;
8119 mode->hsync_start = (hsync & 0xffff) + 1;
8120 mode->hsync_end = ((hsync & 0xffff0000) >> 16) + 1;
8121 mode->vdisplay = (vtot & 0xffff) + 1;
8122 mode->vtotal = ((vtot & 0xffff0000) >> 16) + 1;
8123 mode->vsync_start = (vsync & 0xffff) + 1;
8124 mode->vsync_end = ((vsync & 0xffff0000) >> 16) + 1;
8126 drm_mode_set_name(mode);
8131 static void intel_increase_pllclock(struct drm_crtc *crtc)
8133 struct drm_device *dev = crtc->dev;
8134 drm_i915_private_t *dev_priv = dev->dev_private;
8135 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
8136 int pipe = intel_crtc->pipe;
8137 int dpll_reg = DPLL(pipe);
8140 if (HAS_PCH_SPLIT(dev))
8143 if (!dev_priv->lvds_downclock_avail)
8146 dpll = I915_READ(dpll_reg);
8147 if (!HAS_PIPE_CXSR(dev) && (dpll & DISPLAY_RATE_SELECT_FPA1)) {
8148 DRM_DEBUG_DRIVER("upclocking LVDS\n");
8150 assert_panel_unlocked(dev_priv, pipe);
8152 dpll &= ~DISPLAY_RATE_SELECT_FPA1;
8153 I915_WRITE(dpll_reg, dpll);
8154 intel_wait_for_vblank(dev, pipe);
8156 dpll = I915_READ(dpll_reg);
8157 if (dpll & DISPLAY_RATE_SELECT_FPA1)
8158 DRM_DEBUG_DRIVER("failed to upclock LVDS!\n");
8162 static void intel_decrease_pllclock(struct drm_crtc *crtc)
8164 struct drm_device *dev = crtc->dev;
8165 drm_i915_private_t *dev_priv = dev->dev_private;
8166 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
8168 if (HAS_PCH_SPLIT(dev))
8171 if (!dev_priv->lvds_downclock_avail)
8175 * Since this is called by a timer, we should never get here in
8178 if (!HAS_PIPE_CXSR(dev) && intel_crtc->lowfreq_avail) {
8179 int pipe = intel_crtc->pipe;
8180 int dpll_reg = DPLL(pipe);
8183 DRM_DEBUG_DRIVER("downclocking LVDS\n");
8185 assert_panel_unlocked(dev_priv, pipe);
8187 dpll = I915_READ(dpll_reg);
8188 dpll |= DISPLAY_RATE_SELECT_FPA1;
8189 I915_WRITE(dpll_reg, dpll);
8190 intel_wait_for_vblank(dev, pipe);
8191 dpll = I915_READ(dpll_reg);
8192 if (!(dpll & DISPLAY_RATE_SELECT_FPA1))
8193 DRM_DEBUG_DRIVER("failed to downclock LVDS!\n");
8198 void intel_mark_busy(struct drm_device *dev)
8200 struct drm_i915_private *dev_priv = dev->dev_private;
8202 hsw_package_c8_gpu_busy(dev_priv);
8203 i915_update_gfx_val(dev_priv);
8206 void intel_mark_idle(struct drm_device *dev)
8208 struct drm_i915_private *dev_priv = dev->dev_private;
8209 struct drm_crtc *crtc;
8211 hsw_package_c8_gpu_idle(dev_priv);
8213 if (!i915.powersave)
8216 list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
8220 intel_decrease_pllclock(crtc);
8223 if (dev_priv->info->gen >= 6)
8224 gen6_rps_idle(dev->dev_private);
8227 void intel_mark_fb_busy(struct drm_i915_gem_object *obj,
8228 struct intel_ring_buffer *ring)
8230 struct drm_device *dev = obj->base.dev;
8231 struct drm_crtc *crtc;
8233 if (!i915.powersave)
8236 list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
8240 if (to_intel_framebuffer(crtc->fb)->obj != obj)
8243 intel_increase_pllclock(crtc);
8244 if (ring && intel_fbc_enabled(dev))
8245 ring->fbc_dirty = true;
8249 static void intel_crtc_destroy(struct drm_crtc *crtc)
8251 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
8252 struct drm_device *dev = crtc->dev;
8253 struct intel_unpin_work *work;
8254 unsigned long flags;
8256 spin_lock_irqsave(&dev->event_lock, flags);
8257 work = intel_crtc->unpin_work;
8258 intel_crtc->unpin_work = NULL;
8259 spin_unlock_irqrestore(&dev->event_lock, flags);
8262 cancel_work_sync(&work->work);
8266 intel_crtc_cursor_set(crtc, NULL, 0, 0, 0);
8268 drm_crtc_cleanup(crtc);
8273 static void intel_unpin_work_fn(struct work_struct *__work)
8275 struct intel_unpin_work *work =
8276 container_of(__work, struct intel_unpin_work, work);
8277 struct drm_device *dev = work->crtc->dev;
8279 mutex_lock(&dev->struct_mutex);
8280 intel_unpin_fb_obj(work->old_fb_obj);
8281 drm_gem_object_unreference(&work->pending_flip_obj->base);
8282 drm_gem_object_unreference(&work->old_fb_obj->base);
8284 intel_update_fbc(dev);
8285 mutex_unlock(&dev->struct_mutex);
8287 BUG_ON(atomic_read(&to_intel_crtc(work->crtc)->unpin_work_count) == 0);
8288 atomic_dec(&to_intel_crtc(work->crtc)->unpin_work_count);
8293 static void do_intel_finish_page_flip(struct drm_device *dev,
8294 struct drm_crtc *crtc)
8296 drm_i915_private_t *dev_priv = dev->dev_private;
8297 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
8298 struct intel_unpin_work *work;
8299 unsigned long flags;
8301 /* Ignore early vblank irqs */
8302 if (intel_crtc == NULL)
8305 spin_lock_irqsave(&dev->event_lock, flags);
8306 work = intel_crtc->unpin_work;
8308 /* Ensure we don't miss a work->pending update ... */
8311 if (work == NULL || atomic_read(&work->pending) < INTEL_FLIP_COMPLETE) {
8312 spin_unlock_irqrestore(&dev->event_lock, flags);
8316 /* and that the unpin work is consistent wrt ->pending. */
8319 intel_crtc->unpin_work = NULL;
8322 drm_send_vblank_event(dev, intel_crtc->pipe, work->event);
8324 drm_vblank_put(dev, intel_crtc->pipe);
8326 spin_unlock_irqrestore(&dev->event_lock, flags);
8328 wake_up_all(&dev_priv->pending_flip_queue);
8330 queue_work(dev_priv->wq, &work->work);
8332 trace_i915_flip_complete(intel_crtc->plane, work->pending_flip_obj);
8335 void intel_finish_page_flip(struct drm_device *dev, int pipe)
8337 drm_i915_private_t *dev_priv = dev->dev_private;
8338 struct drm_crtc *crtc = dev_priv->pipe_to_crtc_mapping[pipe];
8340 do_intel_finish_page_flip(dev, crtc);
8343 void intel_finish_page_flip_plane(struct drm_device *dev, int plane)
8345 drm_i915_private_t *dev_priv = dev->dev_private;
8346 struct drm_crtc *crtc = dev_priv->plane_to_crtc_mapping[plane];
8348 do_intel_finish_page_flip(dev, crtc);
8351 void intel_prepare_page_flip(struct drm_device *dev, int plane)
8353 drm_i915_private_t *dev_priv = dev->dev_private;
8354 struct intel_crtc *intel_crtc =
8355 to_intel_crtc(dev_priv->plane_to_crtc_mapping[plane]);
8356 unsigned long flags;
8358 /* NB: An MMIO update of the plane base pointer will also
8359 * generate a page-flip completion irq, i.e. every modeset
8360 * is also accompanied by a spurious intel_prepare_page_flip().
8362 spin_lock_irqsave(&dev->event_lock, flags);
8363 if (intel_crtc->unpin_work)
8364 atomic_inc_not_zero(&intel_crtc->unpin_work->pending);
8365 spin_unlock_irqrestore(&dev->event_lock, flags);
8368 inline static void intel_mark_page_flip_active(struct intel_crtc *intel_crtc)
8370 /* Ensure that the work item is consistent when activating it ... */
8372 atomic_set(&intel_crtc->unpin_work->pending, INTEL_FLIP_PENDING);
8373 /* and that it is marked active as soon as the irq could fire. */
8377 static int intel_gen2_queue_flip(struct drm_device *dev,
8378 struct drm_crtc *crtc,
8379 struct drm_framebuffer *fb,
8380 struct drm_i915_gem_object *obj,
8383 struct drm_i915_private *dev_priv = dev->dev_private;
8384 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
8386 struct intel_ring_buffer *ring = &dev_priv->ring[RCS];
8389 ret = intel_pin_and_fence_fb_obj(dev, obj, ring);
8393 ret = intel_ring_begin(ring, 6);
8397 /* Can't queue multiple flips, so wait for the previous
8398 * one to finish before executing the next.
8400 if (intel_crtc->plane)
8401 flip_mask = MI_WAIT_FOR_PLANE_B_FLIP;
8403 flip_mask = MI_WAIT_FOR_PLANE_A_FLIP;
8404 intel_ring_emit(ring, MI_WAIT_FOR_EVENT | flip_mask);
8405 intel_ring_emit(ring, MI_NOOP);
8406 intel_ring_emit(ring, MI_DISPLAY_FLIP |
8407 MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
8408 intel_ring_emit(ring, fb->pitches[0]);
8409 intel_ring_emit(ring, i915_gem_obj_ggtt_offset(obj) + intel_crtc->dspaddr_offset);
8410 intel_ring_emit(ring, 0); /* aux display base address, unused */
8412 intel_mark_page_flip_active(intel_crtc);
8413 __intel_ring_advance(ring);
8417 intel_unpin_fb_obj(obj);
8422 static int intel_gen3_queue_flip(struct drm_device *dev,
8423 struct drm_crtc *crtc,
8424 struct drm_framebuffer *fb,
8425 struct drm_i915_gem_object *obj,
8428 struct drm_i915_private *dev_priv = dev->dev_private;
8429 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
8431 struct intel_ring_buffer *ring = &dev_priv->ring[RCS];
8434 ret = intel_pin_and_fence_fb_obj(dev, obj, ring);
8438 ret = intel_ring_begin(ring, 6);
8442 if (intel_crtc->plane)
8443 flip_mask = MI_WAIT_FOR_PLANE_B_FLIP;
8445 flip_mask = MI_WAIT_FOR_PLANE_A_FLIP;
8446 intel_ring_emit(ring, MI_WAIT_FOR_EVENT | flip_mask);
8447 intel_ring_emit(ring, MI_NOOP);
8448 intel_ring_emit(ring, MI_DISPLAY_FLIP_I915 |
8449 MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
8450 intel_ring_emit(ring, fb->pitches[0]);
8451 intel_ring_emit(ring, i915_gem_obj_ggtt_offset(obj) + intel_crtc->dspaddr_offset);
8452 intel_ring_emit(ring, MI_NOOP);
8454 intel_mark_page_flip_active(intel_crtc);
8455 __intel_ring_advance(ring);
8459 intel_unpin_fb_obj(obj);
8464 static int intel_gen4_queue_flip(struct drm_device *dev,
8465 struct drm_crtc *crtc,
8466 struct drm_framebuffer *fb,
8467 struct drm_i915_gem_object *obj,
8470 struct drm_i915_private *dev_priv = dev->dev_private;
8471 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
8472 uint32_t pf, pipesrc;
8473 struct intel_ring_buffer *ring = &dev_priv->ring[RCS];
8476 ret = intel_pin_and_fence_fb_obj(dev, obj, ring);
8480 ret = intel_ring_begin(ring, 4);
8484 /* i965+ uses the linear or tiled offsets from the
8485 * Display Registers (which do not change across a page-flip)
8486 * so we need only reprogram the base address.
8488 intel_ring_emit(ring, MI_DISPLAY_FLIP |
8489 MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
8490 intel_ring_emit(ring, fb->pitches[0]);
8491 intel_ring_emit(ring,
8492 (i915_gem_obj_ggtt_offset(obj) + intel_crtc->dspaddr_offset) |
8495 /* XXX Enabling the panel-fitter across page-flip is so far
8496 * untested on non-native modes, so ignore it for now.
8497 * pf = I915_READ(pipe == 0 ? PFA_CTL_1 : PFB_CTL_1) & PF_ENABLE;
8500 pipesrc = I915_READ(PIPESRC(intel_crtc->pipe)) & 0x0fff0fff;
8501 intel_ring_emit(ring, pf | pipesrc);
8503 intel_mark_page_flip_active(intel_crtc);
8504 __intel_ring_advance(ring);
8508 intel_unpin_fb_obj(obj);
8513 static int intel_gen6_queue_flip(struct drm_device *dev,
8514 struct drm_crtc *crtc,
8515 struct drm_framebuffer *fb,
8516 struct drm_i915_gem_object *obj,
8519 struct drm_i915_private *dev_priv = dev->dev_private;
8520 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
8521 struct intel_ring_buffer *ring = &dev_priv->ring[RCS];
8522 uint32_t pf, pipesrc;
8525 ret = intel_pin_and_fence_fb_obj(dev, obj, ring);
8529 ret = intel_ring_begin(ring, 4);
8533 intel_ring_emit(ring, MI_DISPLAY_FLIP |
8534 MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
8535 intel_ring_emit(ring, fb->pitches[0] | obj->tiling_mode);
8536 intel_ring_emit(ring, i915_gem_obj_ggtt_offset(obj) + intel_crtc->dspaddr_offset);
8538 /* Contrary to the suggestions in the documentation,
8539 * "Enable Panel Fitter" does not seem to be required when page
8540 * flipping with a non-native mode, and worse causes a normal
8542 * pf = I915_READ(PF_CTL(intel_crtc->pipe)) & PF_ENABLE;
8545 pipesrc = I915_READ(PIPESRC(intel_crtc->pipe)) & 0x0fff0fff;
8546 intel_ring_emit(ring, pf | pipesrc);
8548 intel_mark_page_flip_active(intel_crtc);
8549 __intel_ring_advance(ring);
8553 intel_unpin_fb_obj(obj);
8558 static int intel_gen7_queue_flip(struct drm_device *dev,
8559 struct drm_crtc *crtc,
8560 struct drm_framebuffer *fb,
8561 struct drm_i915_gem_object *obj,
8564 struct drm_i915_private *dev_priv = dev->dev_private;
8565 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
8566 struct intel_ring_buffer *ring;
8567 uint32_t plane_bit = 0;
8571 if (IS_VALLEYVIEW(dev) || ring == NULL || ring->id != RCS)
8572 ring = &dev_priv->ring[BCS];
8574 ret = intel_pin_and_fence_fb_obj(dev, obj, ring);
8578 switch(intel_crtc->plane) {
8580 plane_bit = MI_DISPLAY_FLIP_IVB_PLANE_A;
8583 plane_bit = MI_DISPLAY_FLIP_IVB_PLANE_B;
8586 plane_bit = MI_DISPLAY_FLIP_IVB_PLANE_C;
8589 WARN_ONCE(1, "unknown plane in flip command\n");
8595 if (ring->id == RCS)
8598 ret = intel_ring_begin(ring, len);
8602 /* Unmask the flip-done completion message. Note that the bspec says that
8603 * we should do this for both the BCS and RCS, and that we must not unmask
8604 * more than one flip event at any time (or ensure that one flip message
8605 * can be sent by waiting for flip-done prior to queueing new flips).
8606 * Experimentation says that BCS works despite DERRMR masking all
8607 * flip-done completion events and that unmasking all planes at once
8608 * for the RCS also doesn't appear to drop events. Setting the DERRMR
8609 * to zero does lead to lockups within MI_DISPLAY_FLIP.
8611 if (ring->id == RCS) {
8612 intel_ring_emit(ring, MI_LOAD_REGISTER_IMM(1));
8613 intel_ring_emit(ring, DERRMR);
8614 intel_ring_emit(ring, ~(DERRMR_PIPEA_PRI_FLIP_DONE |
8615 DERRMR_PIPEB_PRI_FLIP_DONE |
8616 DERRMR_PIPEC_PRI_FLIP_DONE));
8617 intel_ring_emit(ring, MI_STORE_REGISTER_MEM(1) |
8618 MI_SRM_LRM_GLOBAL_GTT);
8619 intel_ring_emit(ring, DERRMR);
8620 intel_ring_emit(ring, ring->scratch.gtt_offset + 256);
8623 intel_ring_emit(ring, MI_DISPLAY_FLIP_I915 | plane_bit);
8624 intel_ring_emit(ring, (fb->pitches[0] | obj->tiling_mode));
8625 intel_ring_emit(ring, i915_gem_obj_ggtt_offset(obj) + intel_crtc->dspaddr_offset);
8626 intel_ring_emit(ring, (MI_NOOP));
8628 intel_mark_page_flip_active(intel_crtc);
8629 __intel_ring_advance(ring);
8633 intel_unpin_fb_obj(obj);
8638 static int intel_default_queue_flip(struct drm_device *dev,
8639 struct drm_crtc *crtc,
8640 struct drm_framebuffer *fb,
8641 struct drm_i915_gem_object *obj,
8647 static int intel_crtc_page_flip(struct drm_crtc *crtc,
8648 struct drm_framebuffer *fb,
8649 struct drm_pending_vblank_event *event,
8650 uint32_t page_flip_flags)
8652 struct drm_device *dev = crtc->dev;
8653 struct drm_i915_private *dev_priv = dev->dev_private;
8654 struct drm_framebuffer *old_fb = crtc->fb;
8655 struct drm_i915_gem_object *obj = to_intel_framebuffer(fb)->obj;
8656 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
8657 struct intel_unpin_work *work;
8658 unsigned long flags;
8661 /* Can't change pixel format via MI display flips. */
8662 if (fb->pixel_format != crtc->fb->pixel_format)
8666 * TILEOFF/LINOFF registers can't be changed via MI display flips.
8667 * Note that pitch changes could also affect these register.
8669 if (INTEL_INFO(dev)->gen > 3 &&
8670 (fb->offsets[0] != crtc->fb->offsets[0] ||
8671 fb->pitches[0] != crtc->fb->pitches[0]))
8674 work = kzalloc(sizeof(*work), GFP_KERNEL);
8678 work->event = event;
8680 work->old_fb_obj = to_intel_framebuffer(old_fb)->obj;
8681 INIT_WORK(&work->work, intel_unpin_work_fn);
8683 ret = drm_vblank_get(dev, intel_crtc->pipe);
8687 /* We borrow the event spin lock for protecting unpin_work */
8688 spin_lock_irqsave(&dev->event_lock, flags);
8689 if (intel_crtc->unpin_work) {
8690 spin_unlock_irqrestore(&dev->event_lock, flags);
8692 drm_vblank_put(dev, intel_crtc->pipe);
8694 DRM_DEBUG_DRIVER("flip queue: crtc already busy\n");
8697 intel_crtc->unpin_work = work;
8698 spin_unlock_irqrestore(&dev->event_lock, flags);
8700 if (atomic_read(&intel_crtc->unpin_work_count) >= 2)
8701 flush_workqueue(dev_priv->wq);
8703 ret = i915_mutex_lock_interruptible(dev);
8707 /* Reference the objects for the scheduled work. */
8708 drm_gem_object_reference(&work->old_fb_obj->base);
8709 drm_gem_object_reference(&obj->base);
8713 work->pending_flip_obj = obj;
8715 work->enable_stall_check = true;
8717 atomic_inc(&intel_crtc->unpin_work_count);
8718 intel_crtc->reset_counter = atomic_read(&dev_priv->gpu_error.reset_counter);
8720 ret = dev_priv->display.queue_flip(dev, crtc, fb, obj, page_flip_flags);
8722 goto cleanup_pending;
8724 intel_disable_fbc(dev);
8725 intel_mark_fb_busy(obj, NULL);
8726 mutex_unlock(&dev->struct_mutex);
8728 trace_i915_flip_request(intel_crtc->plane, obj);
8733 atomic_dec(&intel_crtc->unpin_work_count);
8735 drm_gem_object_unreference(&work->old_fb_obj->base);
8736 drm_gem_object_unreference(&obj->base);
8737 mutex_unlock(&dev->struct_mutex);
8740 spin_lock_irqsave(&dev->event_lock, flags);
8741 intel_crtc->unpin_work = NULL;
8742 spin_unlock_irqrestore(&dev->event_lock, flags);
8744 drm_vblank_put(dev, intel_crtc->pipe);
8751 static struct drm_crtc_helper_funcs intel_helper_funcs = {
8752 .mode_set_base_atomic = intel_pipe_set_base_atomic,
8753 .load_lut = intel_crtc_load_lut,
8756 static bool intel_encoder_crtc_ok(struct drm_encoder *encoder,
8757 struct drm_crtc *crtc)
8759 struct drm_device *dev;
8760 struct drm_crtc *tmp;
8763 WARN(!crtc, "checking null crtc?\n");
8767 list_for_each_entry(tmp, &dev->mode_config.crtc_list, head) {
8773 if (encoder->possible_crtcs & crtc_mask)
8779 * intel_modeset_update_staged_output_state
8781 * Updates the staged output configuration state, e.g. after we've read out the
8784 static void intel_modeset_update_staged_output_state(struct drm_device *dev)
8786 struct intel_crtc *crtc;
8787 struct intel_encoder *encoder;
8788 struct intel_connector *connector;
8790 list_for_each_entry(connector, &dev->mode_config.connector_list,
8792 connector->new_encoder =
8793 to_intel_encoder(connector->base.encoder);
8796 list_for_each_entry(encoder, &dev->mode_config.encoder_list,
8799 to_intel_crtc(encoder->base.crtc);
8802 list_for_each_entry(crtc, &dev->mode_config.crtc_list,
8804 crtc->new_enabled = crtc->base.enabled;
8806 if (crtc->new_enabled)
8807 crtc->new_config = &crtc->config;
8809 crtc->new_config = NULL;
8814 * intel_modeset_commit_output_state
8816 * This function copies the stage display pipe configuration to the real one.
8818 static void intel_modeset_commit_output_state(struct drm_device *dev)
8820 struct intel_crtc *crtc;
8821 struct intel_encoder *encoder;
8822 struct intel_connector *connector;
8824 list_for_each_entry(connector, &dev->mode_config.connector_list,
8826 connector->base.encoder = &connector->new_encoder->base;
8829 list_for_each_entry(encoder, &dev->mode_config.encoder_list,
8831 encoder->base.crtc = &encoder->new_crtc->base;
8834 list_for_each_entry(crtc, &dev->mode_config.crtc_list,
8836 crtc->base.enabled = crtc->new_enabled;
8841 connected_sink_compute_bpp(struct intel_connector * connector,
8842 struct intel_crtc_config *pipe_config)
8844 int bpp = pipe_config->pipe_bpp;
8846 DRM_DEBUG_KMS("[CONNECTOR:%d:%s] checking for sink bpp constrains\n",
8847 connector->base.base.id,
8848 drm_get_connector_name(&connector->base));
8850 /* Don't use an invalid EDID bpc value */
8851 if (connector->base.display_info.bpc &&
8852 connector->base.display_info.bpc * 3 < bpp) {
8853 DRM_DEBUG_KMS("clamping display bpp (was %d) to EDID reported max of %d\n",
8854 bpp, connector->base.display_info.bpc*3);
8855 pipe_config->pipe_bpp = connector->base.display_info.bpc*3;
8858 /* Clamp bpp to 8 on screens without EDID 1.4 */
8859 if (connector->base.display_info.bpc == 0 && bpp > 24) {
8860 DRM_DEBUG_KMS("clamping display bpp (was %d) to default limit of 24\n",
8862 pipe_config->pipe_bpp = 24;
8867 compute_baseline_pipe_bpp(struct intel_crtc *crtc,
8868 struct drm_framebuffer *fb,
8869 struct intel_crtc_config *pipe_config)
8871 struct drm_device *dev = crtc->base.dev;
8872 struct intel_connector *connector;
8875 switch (fb->pixel_format) {
8877 bpp = 8*3; /* since we go through a colormap */
8879 case DRM_FORMAT_XRGB1555:
8880 case DRM_FORMAT_ARGB1555:
8881 /* checked in intel_framebuffer_init already */
8882 if (WARN_ON(INTEL_INFO(dev)->gen > 3))
8884 case DRM_FORMAT_RGB565:
8885 bpp = 6*3; /* min is 18bpp */
8887 case DRM_FORMAT_XBGR8888:
8888 case DRM_FORMAT_ABGR8888:
8889 /* checked in intel_framebuffer_init already */
8890 if (WARN_ON(INTEL_INFO(dev)->gen < 4))
8892 case DRM_FORMAT_XRGB8888:
8893 case DRM_FORMAT_ARGB8888:
8896 case DRM_FORMAT_XRGB2101010:
8897 case DRM_FORMAT_ARGB2101010:
8898 case DRM_FORMAT_XBGR2101010:
8899 case DRM_FORMAT_ABGR2101010:
8900 /* checked in intel_framebuffer_init already */
8901 if (WARN_ON(INTEL_INFO(dev)->gen < 4))
8905 /* TODO: gen4+ supports 16 bpc floating point, too. */
8907 DRM_DEBUG_KMS("unsupported depth\n");
8911 pipe_config->pipe_bpp = bpp;
8913 /* Clamp display bpp to EDID value */
8914 list_for_each_entry(connector, &dev->mode_config.connector_list,
8916 if (!connector->new_encoder ||
8917 connector->new_encoder->new_crtc != crtc)
8920 connected_sink_compute_bpp(connector, pipe_config);
8926 static void intel_dump_crtc_timings(const struct drm_display_mode *mode)
8928 DRM_DEBUG_KMS("crtc timings: %d %d %d %d %d %d %d %d %d, "
8929 "type: 0x%x flags: 0x%x\n",
8931 mode->crtc_hdisplay, mode->crtc_hsync_start,
8932 mode->crtc_hsync_end, mode->crtc_htotal,
8933 mode->crtc_vdisplay, mode->crtc_vsync_start,
8934 mode->crtc_vsync_end, mode->crtc_vtotal, mode->type, mode->flags);
8937 static void intel_dump_pipe_config(struct intel_crtc *crtc,
8938 struct intel_crtc_config *pipe_config,
8939 const char *context)
8941 DRM_DEBUG_KMS("[CRTC:%d]%s config for pipe %c\n", crtc->base.base.id,
8942 context, pipe_name(crtc->pipe));
8944 DRM_DEBUG_KMS("cpu_transcoder: %c\n", transcoder_name(pipe_config->cpu_transcoder));
8945 DRM_DEBUG_KMS("pipe bpp: %i, dithering: %i\n",
8946 pipe_config->pipe_bpp, pipe_config->dither);
8947 DRM_DEBUG_KMS("fdi/pch: %i, lanes: %i, gmch_m: %u, gmch_n: %u, link_m: %u, link_n: %u, tu: %u\n",
8948 pipe_config->has_pch_encoder,
8949 pipe_config->fdi_lanes,
8950 pipe_config->fdi_m_n.gmch_m, pipe_config->fdi_m_n.gmch_n,
8951 pipe_config->fdi_m_n.link_m, pipe_config->fdi_m_n.link_n,
8952 pipe_config->fdi_m_n.tu);
8953 DRM_DEBUG_KMS("dp: %i, gmch_m: %u, gmch_n: %u, link_m: %u, link_n: %u, tu: %u\n",
8954 pipe_config->has_dp_encoder,
8955 pipe_config->dp_m_n.gmch_m, pipe_config->dp_m_n.gmch_n,
8956 pipe_config->dp_m_n.link_m, pipe_config->dp_m_n.link_n,
8957 pipe_config->dp_m_n.tu);
8958 DRM_DEBUG_KMS("requested mode:\n");
8959 drm_mode_debug_printmodeline(&pipe_config->requested_mode);
8960 DRM_DEBUG_KMS("adjusted mode:\n");
8961 drm_mode_debug_printmodeline(&pipe_config->adjusted_mode);
8962 intel_dump_crtc_timings(&pipe_config->adjusted_mode);
8963 DRM_DEBUG_KMS("port clock: %d\n", pipe_config->port_clock);
8964 DRM_DEBUG_KMS("pipe src size: %dx%d\n",
8965 pipe_config->pipe_src_w, pipe_config->pipe_src_h);
8966 DRM_DEBUG_KMS("gmch pfit: control: 0x%08x, ratios: 0x%08x, lvds border: 0x%08x\n",
8967 pipe_config->gmch_pfit.control,
8968 pipe_config->gmch_pfit.pgm_ratios,
8969 pipe_config->gmch_pfit.lvds_border_bits);
8970 DRM_DEBUG_KMS("pch pfit: pos: 0x%08x, size: 0x%08x, %s\n",
8971 pipe_config->pch_pfit.pos,
8972 pipe_config->pch_pfit.size,
8973 pipe_config->pch_pfit.enabled ? "enabled" : "disabled");
8974 DRM_DEBUG_KMS("ips: %i\n", pipe_config->ips_enabled);
8975 DRM_DEBUG_KMS("double wide: %i\n", pipe_config->double_wide);
8978 static bool check_encoder_cloning(struct drm_crtc *crtc)
8980 int num_encoders = 0;
8981 bool uncloneable_encoders = false;
8982 struct intel_encoder *encoder;
8984 list_for_each_entry(encoder, &crtc->dev->mode_config.encoder_list,
8986 if (&encoder->new_crtc->base != crtc)
8990 if (!encoder->cloneable)
8991 uncloneable_encoders = true;
8994 return !(num_encoders > 1 && uncloneable_encoders);
8997 static struct intel_crtc_config *
8998 intel_modeset_pipe_config(struct drm_crtc *crtc,
8999 struct drm_framebuffer *fb,
9000 struct drm_display_mode *mode)
9002 struct drm_device *dev = crtc->dev;
9003 struct intel_encoder *encoder;
9004 struct intel_crtc_config *pipe_config;
9005 int plane_bpp, ret = -EINVAL;
9008 if (!check_encoder_cloning(crtc)) {
9009 DRM_DEBUG_KMS("rejecting invalid cloning configuration\n");
9010 return ERR_PTR(-EINVAL);
9013 pipe_config = kzalloc(sizeof(*pipe_config), GFP_KERNEL);
9015 return ERR_PTR(-ENOMEM);
9017 drm_mode_copy(&pipe_config->adjusted_mode, mode);
9018 drm_mode_copy(&pipe_config->requested_mode, mode);
9020 pipe_config->cpu_transcoder =
9021 (enum transcoder) to_intel_crtc(crtc)->pipe;
9022 pipe_config->shared_dpll = DPLL_ID_PRIVATE;
9025 * Sanitize sync polarity flags based on requested ones. If neither
9026 * positive or negative polarity is requested, treat this as meaning
9027 * negative polarity.
9029 if (!(pipe_config->adjusted_mode.flags &
9030 (DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NHSYNC)))
9031 pipe_config->adjusted_mode.flags |= DRM_MODE_FLAG_NHSYNC;
9033 if (!(pipe_config->adjusted_mode.flags &
9034 (DRM_MODE_FLAG_PVSYNC | DRM_MODE_FLAG_NVSYNC)))
9035 pipe_config->adjusted_mode.flags |= DRM_MODE_FLAG_NVSYNC;
9037 /* Compute a starting value for pipe_config->pipe_bpp taking the source
9038 * plane pixel format and any sink constraints into account. Returns the
9039 * source plane bpp so that dithering can be selected on mismatches
9040 * after encoders and crtc also have had their say. */
9041 plane_bpp = compute_baseline_pipe_bpp(to_intel_crtc(crtc),
9047 * Determine the real pipe dimensions. Note that stereo modes can
9048 * increase the actual pipe size due to the frame doubling and
9049 * insertion of additional space for blanks between the frame. This
9050 * is stored in the crtc timings. We use the requested mode to do this
9051 * computation to clearly distinguish it from the adjusted mode, which
9052 * can be changed by the connectors in the below retry loop.
9054 drm_mode_set_crtcinfo(&pipe_config->requested_mode, CRTC_STEREO_DOUBLE);
9055 pipe_config->pipe_src_w = pipe_config->requested_mode.crtc_hdisplay;
9056 pipe_config->pipe_src_h = pipe_config->requested_mode.crtc_vdisplay;
9059 /* Ensure the port clock defaults are reset when retrying. */
9060 pipe_config->port_clock = 0;
9061 pipe_config->pixel_multiplier = 1;
9063 /* Fill in default crtc timings, allow encoders to overwrite them. */
9064 drm_mode_set_crtcinfo(&pipe_config->adjusted_mode, CRTC_STEREO_DOUBLE);
9066 /* Pass our mode to the connectors and the CRTC to give them a chance to
9067 * adjust it according to limitations or connector properties, and also
9068 * a chance to reject the mode entirely.
9070 list_for_each_entry(encoder, &dev->mode_config.encoder_list,
9073 if (&encoder->new_crtc->base != crtc)
9076 if (!(encoder->compute_config(encoder, pipe_config))) {
9077 DRM_DEBUG_KMS("Encoder config failure\n");
9082 /* Set default port clock if not overwritten by the encoder. Needs to be
9083 * done afterwards in case the encoder adjusts the mode. */
9084 if (!pipe_config->port_clock)
9085 pipe_config->port_clock = pipe_config->adjusted_mode.crtc_clock
9086 * pipe_config->pixel_multiplier;
9088 ret = intel_crtc_compute_config(to_intel_crtc(crtc), pipe_config);
9090 DRM_DEBUG_KMS("CRTC fixup failed\n");
9095 if (WARN(!retry, "loop in pipe configuration computation\n")) {
9100 DRM_DEBUG_KMS("CRTC bw constrained, retrying\n");
9105 pipe_config->dither = pipe_config->pipe_bpp != plane_bpp;
9106 DRM_DEBUG_KMS("plane bpp: %i, pipe bpp: %i, dithering: %i\n",
9107 plane_bpp, pipe_config->pipe_bpp, pipe_config->dither);
9112 return ERR_PTR(ret);
9115 /* Computes which crtcs are affected and sets the relevant bits in the mask. For
9116 * simplicity we use the crtc's pipe number (because it's easier to obtain). */
9118 intel_modeset_affected_pipes(struct drm_crtc *crtc, unsigned *modeset_pipes,
9119 unsigned *prepare_pipes, unsigned *disable_pipes)
9121 struct intel_crtc *intel_crtc;
9122 struct drm_device *dev = crtc->dev;
9123 struct intel_encoder *encoder;
9124 struct intel_connector *connector;
9125 struct drm_crtc *tmp_crtc;
9127 *disable_pipes = *modeset_pipes = *prepare_pipes = 0;
9129 /* Check which crtcs have changed outputs connected to them, these need
9130 * to be part of the prepare_pipes mask. We don't (yet) support global
9131 * modeset across multiple crtcs, so modeset_pipes will only have one
9132 * bit set at most. */
9133 list_for_each_entry(connector, &dev->mode_config.connector_list,
9135 if (connector->base.encoder == &connector->new_encoder->base)
9138 if (connector->base.encoder) {
9139 tmp_crtc = connector->base.encoder->crtc;
9141 *prepare_pipes |= 1 << to_intel_crtc(tmp_crtc)->pipe;
9144 if (connector->new_encoder)
9146 1 << connector->new_encoder->new_crtc->pipe;
9149 list_for_each_entry(encoder, &dev->mode_config.encoder_list,
9151 if (encoder->base.crtc == &encoder->new_crtc->base)
9154 if (encoder->base.crtc) {
9155 tmp_crtc = encoder->base.crtc;
9157 *prepare_pipes |= 1 << to_intel_crtc(tmp_crtc)->pipe;
9160 if (encoder->new_crtc)
9161 *prepare_pipes |= 1 << encoder->new_crtc->pipe;
9164 /* Check for pipes that will be enabled/disabled ... */
9165 list_for_each_entry(intel_crtc, &dev->mode_config.crtc_list,
9167 if (intel_crtc->base.enabled == intel_crtc->new_enabled)
9170 if (!intel_crtc->new_enabled)
9171 *disable_pipes |= 1 << intel_crtc->pipe;
9173 *prepare_pipes |= 1 << intel_crtc->pipe;
9177 /* set_mode is also used to update properties on life display pipes. */
9178 intel_crtc = to_intel_crtc(crtc);
9179 if (intel_crtc->new_enabled)
9180 *prepare_pipes |= 1 << intel_crtc->pipe;
9183 * For simplicity do a full modeset on any pipe where the output routing
9184 * changed. We could be more clever, but that would require us to be
9185 * more careful with calling the relevant encoder->mode_set functions.
9188 *modeset_pipes = *prepare_pipes;
9190 /* ... and mask these out. */
9191 *modeset_pipes &= ~(*disable_pipes);
9192 *prepare_pipes &= ~(*disable_pipes);
9195 * HACK: We don't (yet) fully support global modesets. intel_set_config
9196 * obies this rule, but the modeset restore mode of
9197 * intel_modeset_setup_hw_state does not.
9199 *modeset_pipes &= 1 << intel_crtc->pipe;
9200 *prepare_pipes &= 1 << intel_crtc->pipe;
9202 DRM_DEBUG_KMS("set mode pipe masks: modeset: %x, prepare: %x, disable: %x\n",
9203 *modeset_pipes, *prepare_pipes, *disable_pipes);
9206 static bool intel_crtc_in_use(struct drm_crtc *crtc)
9208 struct drm_encoder *encoder;
9209 struct drm_device *dev = crtc->dev;
9211 list_for_each_entry(encoder, &dev->mode_config.encoder_list, head)
9212 if (encoder->crtc == crtc)
9219 intel_modeset_update_state(struct drm_device *dev, unsigned prepare_pipes)
9221 struct intel_encoder *intel_encoder;
9222 struct intel_crtc *intel_crtc;
9223 struct drm_connector *connector;
9225 list_for_each_entry(intel_encoder, &dev->mode_config.encoder_list,
9227 if (!intel_encoder->base.crtc)
9230 intel_crtc = to_intel_crtc(intel_encoder->base.crtc);
9232 if (prepare_pipes & (1 << intel_crtc->pipe))
9233 intel_encoder->connectors_active = false;
9236 intel_modeset_commit_output_state(dev);
9238 /* Double check state. */
9239 list_for_each_entry(intel_crtc, &dev->mode_config.crtc_list,
9241 WARN_ON(intel_crtc->base.enabled != intel_crtc_in_use(&intel_crtc->base));
9242 WARN_ON(intel_crtc->new_config &&
9243 intel_crtc->new_config != &intel_crtc->config);
9244 WARN_ON(intel_crtc->base.enabled != !!intel_crtc->new_config);
9247 list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
9248 if (!connector->encoder || !connector->encoder->crtc)
9251 intel_crtc = to_intel_crtc(connector->encoder->crtc);
9253 if (prepare_pipes & (1 << intel_crtc->pipe)) {
9254 struct drm_property *dpms_property =
9255 dev->mode_config.dpms_property;
9257 connector->dpms = DRM_MODE_DPMS_ON;
9258 drm_object_property_set_value(&connector->base,
9262 intel_encoder = to_intel_encoder(connector->encoder);
9263 intel_encoder->connectors_active = true;
9269 static bool intel_fuzzy_clock_check(int clock1, int clock2)
9273 if (clock1 == clock2)
9276 if (!clock1 || !clock2)
9279 diff = abs(clock1 - clock2);
9281 if (((((diff + clock1 + clock2) * 100)) / (clock1 + clock2)) < 105)
9287 #define for_each_intel_crtc_masked(dev, mask, intel_crtc) \
9288 list_for_each_entry((intel_crtc), \
9289 &(dev)->mode_config.crtc_list, \
9291 if (mask & (1 <<(intel_crtc)->pipe))
9294 intel_pipe_config_compare(struct drm_device *dev,
9295 struct intel_crtc_config *current_config,
9296 struct intel_crtc_config *pipe_config)
9298 #define PIPE_CONF_CHECK_X(name) \
9299 if (current_config->name != pipe_config->name) { \
9300 DRM_ERROR("mismatch in " #name " " \
9301 "(expected 0x%08x, found 0x%08x)\n", \
9302 current_config->name, \
9303 pipe_config->name); \
9307 #define PIPE_CONF_CHECK_I(name) \
9308 if (current_config->name != pipe_config->name) { \
9309 DRM_ERROR("mismatch in " #name " " \
9310 "(expected %i, found %i)\n", \
9311 current_config->name, \
9312 pipe_config->name); \
9316 #define PIPE_CONF_CHECK_FLAGS(name, mask) \
9317 if ((current_config->name ^ pipe_config->name) & (mask)) { \
9318 DRM_ERROR("mismatch in " #name "(" #mask ") " \
9319 "(expected %i, found %i)\n", \
9320 current_config->name & (mask), \
9321 pipe_config->name & (mask)); \
9325 #define PIPE_CONF_CHECK_CLOCK_FUZZY(name) \
9326 if (!intel_fuzzy_clock_check(current_config->name, pipe_config->name)) { \
9327 DRM_ERROR("mismatch in " #name " " \
9328 "(expected %i, found %i)\n", \
9329 current_config->name, \
9330 pipe_config->name); \
9334 #define PIPE_CONF_QUIRK(quirk) \
9335 ((current_config->quirks | pipe_config->quirks) & (quirk))
9337 PIPE_CONF_CHECK_I(cpu_transcoder);
9339 PIPE_CONF_CHECK_I(has_pch_encoder);
9340 PIPE_CONF_CHECK_I(fdi_lanes);
9341 PIPE_CONF_CHECK_I(fdi_m_n.gmch_m);
9342 PIPE_CONF_CHECK_I(fdi_m_n.gmch_n);
9343 PIPE_CONF_CHECK_I(fdi_m_n.link_m);
9344 PIPE_CONF_CHECK_I(fdi_m_n.link_n);
9345 PIPE_CONF_CHECK_I(fdi_m_n.tu);
9347 PIPE_CONF_CHECK_I(has_dp_encoder);
9348 PIPE_CONF_CHECK_I(dp_m_n.gmch_m);
9349 PIPE_CONF_CHECK_I(dp_m_n.gmch_n);
9350 PIPE_CONF_CHECK_I(dp_m_n.link_m);
9351 PIPE_CONF_CHECK_I(dp_m_n.link_n);
9352 PIPE_CONF_CHECK_I(dp_m_n.tu);
9354 PIPE_CONF_CHECK_I(adjusted_mode.crtc_hdisplay);
9355 PIPE_CONF_CHECK_I(adjusted_mode.crtc_htotal);
9356 PIPE_CONF_CHECK_I(adjusted_mode.crtc_hblank_start);
9357 PIPE_CONF_CHECK_I(adjusted_mode.crtc_hblank_end);
9358 PIPE_CONF_CHECK_I(adjusted_mode.crtc_hsync_start);
9359 PIPE_CONF_CHECK_I(adjusted_mode.crtc_hsync_end);
9361 PIPE_CONF_CHECK_I(adjusted_mode.crtc_vdisplay);
9362 PIPE_CONF_CHECK_I(adjusted_mode.crtc_vtotal);
9363 PIPE_CONF_CHECK_I(adjusted_mode.crtc_vblank_start);
9364 PIPE_CONF_CHECK_I(adjusted_mode.crtc_vblank_end);
9365 PIPE_CONF_CHECK_I(adjusted_mode.crtc_vsync_start);
9366 PIPE_CONF_CHECK_I(adjusted_mode.crtc_vsync_end);
9368 PIPE_CONF_CHECK_I(pixel_multiplier);
9370 PIPE_CONF_CHECK_FLAGS(adjusted_mode.flags,
9371 DRM_MODE_FLAG_INTERLACE);
9373 if (!PIPE_CONF_QUIRK(PIPE_CONFIG_QUIRK_MODE_SYNC_FLAGS)) {
9374 PIPE_CONF_CHECK_FLAGS(adjusted_mode.flags,
9375 DRM_MODE_FLAG_PHSYNC);
9376 PIPE_CONF_CHECK_FLAGS(adjusted_mode.flags,
9377 DRM_MODE_FLAG_NHSYNC);
9378 PIPE_CONF_CHECK_FLAGS(adjusted_mode.flags,
9379 DRM_MODE_FLAG_PVSYNC);
9380 PIPE_CONF_CHECK_FLAGS(adjusted_mode.flags,
9381 DRM_MODE_FLAG_NVSYNC);
9384 PIPE_CONF_CHECK_I(pipe_src_w);
9385 PIPE_CONF_CHECK_I(pipe_src_h);
9387 PIPE_CONF_CHECK_I(gmch_pfit.control);
9388 /* pfit ratios are autocomputed by the hw on gen4+ */
9389 if (INTEL_INFO(dev)->gen < 4)
9390 PIPE_CONF_CHECK_I(gmch_pfit.pgm_ratios);
9391 PIPE_CONF_CHECK_I(gmch_pfit.lvds_border_bits);
9392 PIPE_CONF_CHECK_I(pch_pfit.enabled);
9393 if (current_config->pch_pfit.enabled) {
9394 PIPE_CONF_CHECK_I(pch_pfit.pos);
9395 PIPE_CONF_CHECK_I(pch_pfit.size);
9398 /* BDW+ don't expose a synchronous way to read the state */
9399 if (IS_HASWELL(dev))
9400 PIPE_CONF_CHECK_I(ips_enabled);
9402 PIPE_CONF_CHECK_I(double_wide);
9404 PIPE_CONF_CHECK_I(shared_dpll);
9405 PIPE_CONF_CHECK_X(dpll_hw_state.dpll);
9406 PIPE_CONF_CHECK_X(dpll_hw_state.dpll_md);
9407 PIPE_CONF_CHECK_X(dpll_hw_state.fp0);
9408 PIPE_CONF_CHECK_X(dpll_hw_state.fp1);
9410 if (IS_G4X(dev) || INTEL_INFO(dev)->gen >= 5)
9411 PIPE_CONF_CHECK_I(pipe_bpp);
9413 PIPE_CONF_CHECK_CLOCK_FUZZY(adjusted_mode.crtc_clock);
9414 PIPE_CONF_CHECK_CLOCK_FUZZY(port_clock);
9416 #undef PIPE_CONF_CHECK_X
9417 #undef PIPE_CONF_CHECK_I
9418 #undef PIPE_CONF_CHECK_FLAGS
9419 #undef PIPE_CONF_CHECK_CLOCK_FUZZY
9420 #undef PIPE_CONF_QUIRK
9426 check_connector_state(struct drm_device *dev)
9428 struct intel_connector *connector;
9430 list_for_each_entry(connector, &dev->mode_config.connector_list,
9432 /* This also checks the encoder/connector hw state with the
9433 * ->get_hw_state callbacks. */
9434 intel_connector_check_state(connector);
9436 WARN(&connector->new_encoder->base != connector->base.encoder,
9437 "connector's staged encoder doesn't match current encoder\n");
9442 check_encoder_state(struct drm_device *dev)
9444 struct intel_encoder *encoder;
9445 struct intel_connector *connector;
9447 list_for_each_entry(encoder, &dev->mode_config.encoder_list,
9449 bool enabled = false;
9450 bool active = false;
9451 enum pipe pipe, tracked_pipe;
9453 DRM_DEBUG_KMS("[ENCODER:%d:%s]\n",
9454 encoder->base.base.id,
9455 drm_get_encoder_name(&encoder->base));
9457 WARN(&encoder->new_crtc->base != encoder->base.crtc,
9458 "encoder's stage crtc doesn't match current crtc\n");
9459 WARN(encoder->connectors_active && !encoder->base.crtc,
9460 "encoder's active_connectors set, but no crtc\n");
9462 list_for_each_entry(connector, &dev->mode_config.connector_list,
9464 if (connector->base.encoder != &encoder->base)
9467 if (connector->base.dpms != DRM_MODE_DPMS_OFF)
9470 WARN(!!encoder->base.crtc != enabled,
9471 "encoder's enabled state mismatch "
9472 "(expected %i, found %i)\n",
9473 !!encoder->base.crtc, enabled);
9474 WARN(active && !encoder->base.crtc,
9475 "active encoder with no crtc\n");
9477 WARN(encoder->connectors_active != active,
9478 "encoder's computed active state doesn't match tracked active state "
9479 "(expected %i, found %i)\n", active, encoder->connectors_active);
9481 active = encoder->get_hw_state(encoder, &pipe);
9482 WARN(active != encoder->connectors_active,
9483 "encoder's hw state doesn't match sw tracking "
9484 "(expected %i, found %i)\n",
9485 encoder->connectors_active, active);
9487 if (!encoder->base.crtc)
9490 tracked_pipe = to_intel_crtc(encoder->base.crtc)->pipe;
9491 WARN(active && pipe != tracked_pipe,
9492 "active encoder's pipe doesn't match"
9493 "(expected %i, found %i)\n",
9494 tracked_pipe, pipe);
9500 check_crtc_state(struct drm_device *dev)
9502 drm_i915_private_t *dev_priv = dev->dev_private;
9503 struct intel_crtc *crtc;
9504 struct intel_encoder *encoder;
9505 struct intel_crtc_config pipe_config;
9507 list_for_each_entry(crtc, &dev->mode_config.crtc_list,
9509 bool enabled = false;
9510 bool active = false;
9512 memset(&pipe_config, 0, sizeof(pipe_config));
9514 DRM_DEBUG_KMS("[CRTC:%d]\n",
9515 crtc->base.base.id);
9517 WARN(crtc->active && !crtc->base.enabled,
9518 "active crtc, but not enabled in sw tracking\n");
9520 list_for_each_entry(encoder, &dev->mode_config.encoder_list,
9522 if (encoder->base.crtc != &crtc->base)
9525 if (encoder->connectors_active)
9529 WARN(active != crtc->active,
9530 "crtc's computed active state doesn't match tracked active state "
9531 "(expected %i, found %i)\n", active, crtc->active);
9532 WARN(enabled != crtc->base.enabled,
9533 "crtc's computed enabled state doesn't match tracked enabled state "
9534 "(expected %i, found %i)\n", enabled, crtc->base.enabled);
9536 active = dev_priv->display.get_pipe_config(crtc,
9539 /* hw state is inconsistent with the pipe A quirk */
9540 if (crtc->pipe == PIPE_A && dev_priv->quirks & QUIRK_PIPEA_FORCE)
9541 active = crtc->active;
9543 list_for_each_entry(encoder, &dev->mode_config.encoder_list,
9546 if (encoder->base.crtc != &crtc->base)
9548 if (encoder->get_hw_state(encoder, &pipe))
9549 encoder->get_config(encoder, &pipe_config);
9552 WARN(crtc->active != active,
9553 "crtc active state doesn't match with hw state "
9554 "(expected %i, found %i)\n", crtc->active, active);
9557 !intel_pipe_config_compare(dev, &crtc->config, &pipe_config)) {
9558 WARN(1, "pipe state doesn't match!\n");
9559 intel_dump_pipe_config(crtc, &pipe_config,
9561 intel_dump_pipe_config(crtc, &crtc->config,
9568 check_shared_dpll_state(struct drm_device *dev)
9570 drm_i915_private_t *dev_priv = dev->dev_private;
9571 struct intel_crtc *crtc;
9572 struct intel_dpll_hw_state dpll_hw_state;
9575 for (i = 0; i < dev_priv->num_shared_dpll; i++) {
9576 struct intel_shared_dpll *pll = &dev_priv->shared_dplls[i];
9577 int enabled_crtcs = 0, active_crtcs = 0;
9580 memset(&dpll_hw_state, 0, sizeof(dpll_hw_state));
9582 DRM_DEBUG_KMS("%s\n", pll->name);
9584 active = pll->get_hw_state(dev_priv, pll, &dpll_hw_state);
9586 WARN(pll->active > pll->refcount,
9587 "more active pll users than references: %i vs %i\n",
9588 pll->active, pll->refcount);
9589 WARN(pll->active && !pll->on,
9590 "pll in active use but not on in sw tracking\n");
9591 WARN(pll->on && !pll->active,
9592 "pll in on but not on in use in sw tracking\n");
9593 WARN(pll->on != active,
9594 "pll on state mismatch (expected %i, found %i)\n",
9597 list_for_each_entry(crtc, &dev->mode_config.crtc_list,
9599 if (crtc->base.enabled && intel_crtc_to_shared_dpll(crtc) == pll)
9601 if (crtc->active && intel_crtc_to_shared_dpll(crtc) == pll)
9604 WARN(pll->active != active_crtcs,
9605 "pll active crtcs mismatch (expected %i, found %i)\n",
9606 pll->active, active_crtcs);
9607 WARN(pll->refcount != enabled_crtcs,
9608 "pll enabled crtcs mismatch (expected %i, found %i)\n",
9609 pll->refcount, enabled_crtcs);
9611 WARN(pll->on && memcmp(&pll->hw_state, &dpll_hw_state,
9612 sizeof(dpll_hw_state)),
9613 "pll hw state mismatch\n");
9618 intel_modeset_check_state(struct drm_device *dev)
9620 check_connector_state(dev);
9621 check_encoder_state(dev);
9622 check_crtc_state(dev);
9623 check_shared_dpll_state(dev);
9626 void ironlake_check_encoder_dotclock(const struct intel_crtc_config *pipe_config,
9630 * FDI already provided one idea for the dotclock.
9631 * Yell if the encoder disagrees.
9633 WARN(!intel_fuzzy_clock_check(pipe_config->adjusted_mode.crtc_clock, dotclock),
9634 "FDI dotclock and encoder dotclock mismatch, fdi: %i, encoder: %i\n",
9635 pipe_config->adjusted_mode.crtc_clock, dotclock);
9638 static int __intel_set_mode(struct drm_crtc *crtc,
9639 struct drm_display_mode *mode,
9640 int x, int y, struct drm_framebuffer *fb)
9642 struct drm_device *dev = crtc->dev;
9643 drm_i915_private_t *dev_priv = dev->dev_private;
9644 struct drm_display_mode *saved_mode;
9645 struct intel_crtc_config *pipe_config = NULL;
9646 struct intel_crtc *intel_crtc;
9647 unsigned disable_pipes, prepare_pipes, modeset_pipes;
9650 saved_mode = kmalloc(sizeof(*saved_mode), GFP_KERNEL);
9654 intel_modeset_affected_pipes(crtc, &modeset_pipes,
9655 &prepare_pipes, &disable_pipes);
9657 *saved_mode = crtc->mode;
9659 /* Hack: Because we don't (yet) support global modeset on multiple
9660 * crtcs, we don't keep track of the new mode for more than one crtc.
9661 * Hence simply check whether any bit is set in modeset_pipes in all the
9662 * pieces of code that are not yet converted to deal with mutliple crtcs
9663 * changing their mode at the same time. */
9664 if (modeset_pipes) {
9665 pipe_config = intel_modeset_pipe_config(crtc, fb, mode);
9666 if (IS_ERR(pipe_config)) {
9667 ret = PTR_ERR(pipe_config);
9672 intel_dump_pipe_config(to_intel_crtc(crtc), pipe_config,
9674 to_intel_crtc(crtc)->new_config = pipe_config;
9678 * See if the config requires any additional preparation, e.g.
9679 * to adjust global state with pipes off. We need to do this
9680 * here so we can get the modeset_pipe updated config for the new
9681 * mode set on this crtc. For other crtcs we need to use the
9682 * adjusted_mode bits in the crtc directly.
9684 if (IS_VALLEYVIEW(dev)) {
9685 valleyview_modeset_global_pipes(dev, &prepare_pipes);
9687 /* may have added more to prepare_pipes than we should */
9688 prepare_pipes &= ~disable_pipes;
9691 for_each_intel_crtc_masked(dev, disable_pipes, intel_crtc)
9692 intel_crtc_disable(&intel_crtc->base);
9694 for_each_intel_crtc_masked(dev, prepare_pipes, intel_crtc) {
9695 if (intel_crtc->base.enabled)
9696 dev_priv->display.crtc_disable(&intel_crtc->base);
9699 /* crtc->mode is already used by the ->mode_set callbacks, hence we need
9700 * to set it here already despite that we pass it down the callchain.
9702 if (modeset_pipes) {
9704 /* mode_set/enable/disable functions rely on a correct pipe
9706 to_intel_crtc(crtc)->config = *pipe_config;
9707 to_intel_crtc(crtc)->new_config = &to_intel_crtc(crtc)->config;
9710 * Calculate and store various constants which
9711 * are later needed by vblank and swap-completion
9712 * timestamping. They are derived from true hwmode.
9714 drm_calc_timestamping_constants(crtc,
9715 &pipe_config->adjusted_mode);
9718 /* Only after disabling all output pipelines that will be changed can we
9719 * update the the output configuration. */
9720 intel_modeset_update_state(dev, prepare_pipes);
9722 if (dev_priv->display.modeset_global_resources)
9723 dev_priv->display.modeset_global_resources(dev);
9725 /* Set up the DPLL and any encoders state that needs to adjust or depend
9728 for_each_intel_crtc_masked(dev, modeset_pipes, intel_crtc) {
9729 ret = intel_crtc_mode_set(&intel_crtc->base,
9735 /* Now enable the clocks, plane, pipe, and connectors that we set up. */
9736 for_each_intel_crtc_masked(dev, prepare_pipes, intel_crtc)
9737 dev_priv->display.crtc_enable(&intel_crtc->base);
9739 /* FIXME: add subpixel order */
9741 if (ret && crtc->enabled)
9742 crtc->mode = *saved_mode;
9750 static int intel_set_mode(struct drm_crtc *crtc,
9751 struct drm_display_mode *mode,
9752 int x, int y, struct drm_framebuffer *fb)
9756 ret = __intel_set_mode(crtc, mode, x, y, fb);
9759 intel_modeset_check_state(crtc->dev);
9764 void intel_crtc_restore_mode(struct drm_crtc *crtc)
9766 intel_set_mode(crtc, &crtc->mode, crtc->x, crtc->y, crtc->fb);
9769 #undef for_each_intel_crtc_masked
9771 static void intel_set_config_free(struct intel_set_config *config)
9776 kfree(config->save_connector_encoders);
9777 kfree(config->save_encoder_crtcs);
9778 kfree(config->save_crtc_enabled);
9782 static int intel_set_config_save_state(struct drm_device *dev,
9783 struct intel_set_config *config)
9785 struct drm_crtc *crtc;
9786 struct drm_encoder *encoder;
9787 struct drm_connector *connector;
9790 config->save_crtc_enabled =
9791 kcalloc(dev->mode_config.num_crtc,
9792 sizeof(bool), GFP_KERNEL);
9793 if (!config->save_crtc_enabled)
9796 config->save_encoder_crtcs =
9797 kcalloc(dev->mode_config.num_encoder,
9798 sizeof(struct drm_crtc *), GFP_KERNEL);
9799 if (!config->save_encoder_crtcs)
9802 config->save_connector_encoders =
9803 kcalloc(dev->mode_config.num_connector,
9804 sizeof(struct drm_encoder *), GFP_KERNEL);
9805 if (!config->save_connector_encoders)
9808 /* Copy data. Note that driver private data is not affected.
9809 * Should anything bad happen only the expected state is
9810 * restored, not the drivers personal bookkeeping.
9813 list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
9814 config->save_crtc_enabled[count++] = crtc->enabled;
9818 list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
9819 config->save_encoder_crtcs[count++] = encoder->crtc;
9823 list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
9824 config->save_connector_encoders[count++] = connector->encoder;
9830 static void intel_set_config_restore_state(struct drm_device *dev,
9831 struct intel_set_config *config)
9833 struct intel_crtc *crtc;
9834 struct intel_encoder *encoder;
9835 struct intel_connector *connector;
9839 list_for_each_entry(crtc, &dev->mode_config.crtc_list, base.head) {
9840 crtc->new_enabled = config->save_crtc_enabled[count++];
9842 if (crtc->new_enabled)
9843 crtc->new_config = &crtc->config;
9845 crtc->new_config = NULL;
9849 list_for_each_entry(encoder, &dev->mode_config.encoder_list, base.head) {
9851 to_intel_crtc(config->save_encoder_crtcs[count++]);
9855 list_for_each_entry(connector, &dev->mode_config.connector_list, base.head) {
9856 connector->new_encoder =
9857 to_intel_encoder(config->save_connector_encoders[count++]);
9862 is_crtc_connector_off(struct drm_mode_set *set)
9866 if (set->num_connectors == 0)
9869 if (WARN_ON(set->connectors == NULL))
9872 for (i = 0; i < set->num_connectors; i++)
9873 if (set->connectors[i]->encoder &&
9874 set->connectors[i]->encoder->crtc == set->crtc &&
9875 set->connectors[i]->dpms != DRM_MODE_DPMS_ON)
9882 intel_set_config_compute_mode_changes(struct drm_mode_set *set,
9883 struct intel_set_config *config)
9886 /* We should be able to check here if the fb has the same properties
9887 * and then just flip_or_move it */
9888 if (is_crtc_connector_off(set)) {
9889 config->mode_changed = true;
9890 } else if (set->crtc->fb != set->fb) {
9891 /* If we have no fb then treat it as a full mode set */
9892 if (set->crtc->fb == NULL) {
9893 struct intel_crtc *intel_crtc =
9894 to_intel_crtc(set->crtc);
9896 if (intel_crtc->active && i915.fastboot) {
9897 DRM_DEBUG_KMS("crtc has no fb, will flip\n");
9898 config->fb_changed = true;
9900 DRM_DEBUG_KMS("inactive crtc, full mode set\n");
9901 config->mode_changed = true;
9903 } else if (set->fb == NULL) {
9904 config->mode_changed = true;
9905 } else if (set->fb->pixel_format !=
9906 set->crtc->fb->pixel_format) {
9907 config->mode_changed = true;
9909 config->fb_changed = true;
9913 if (set->fb && (set->x != set->crtc->x || set->y != set->crtc->y))
9914 config->fb_changed = true;
9916 if (set->mode && !drm_mode_equal(set->mode, &set->crtc->mode)) {
9917 DRM_DEBUG_KMS("modes are different, full mode set\n");
9918 drm_mode_debug_printmodeline(&set->crtc->mode);
9919 drm_mode_debug_printmodeline(set->mode);
9920 config->mode_changed = true;
9923 DRM_DEBUG_KMS("computed changes for [CRTC:%d], mode_changed=%d, fb_changed=%d\n",
9924 set->crtc->base.id, config->mode_changed, config->fb_changed);
9928 intel_modeset_stage_output_state(struct drm_device *dev,
9929 struct drm_mode_set *set,
9930 struct intel_set_config *config)
9932 struct intel_connector *connector;
9933 struct intel_encoder *encoder;
9934 struct intel_crtc *crtc;
9937 /* The upper layers ensure that we either disable a crtc or have a list
9938 * of connectors. For paranoia, double-check this. */
9939 WARN_ON(!set->fb && (set->num_connectors != 0));
9940 WARN_ON(set->fb && (set->num_connectors == 0));
9942 list_for_each_entry(connector, &dev->mode_config.connector_list,
9944 /* Otherwise traverse passed in connector list and get encoders
9946 for (ro = 0; ro < set->num_connectors; ro++) {
9947 if (set->connectors[ro] == &connector->base) {
9948 connector->new_encoder = connector->encoder;
9953 /* If we disable the crtc, disable all its connectors. Also, if
9954 * the connector is on the changing crtc but not on the new
9955 * connector list, disable it. */
9956 if ((!set->fb || ro == set->num_connectors) &&
9957 connector->base.encoder &&
9958 connector->base.encoder->crtc == set->crtc) {
9959 connector->new_encoder = NULL;
9961 DRM_DEBUG_KMS("[CONNECTOR:%d:%s] to [NOCRTC]\n",
9962 connector->base.base.id,
9963 drm_get_connector_name(&connector->base));
9967 if (&connector->new_encoder->base != connector->base.encoder) {
9968 DRM_DEBUG_KMS("encoder changed, full mode switch\n");
9969 config->mode_changed = true;
9972 /* connector->new_encoder is now updated for all connectors. */
9974 /* Update crtc of enabled connectors. */
9975 list_for_each_entry(connector, &dev->mode_config.connector_list,
9977 struct drm_crtc *new_crtc;
9979 if (!connector->new_encoder)
9982 new_crtc = connector->new_encoder->base.crtc;
9984 for (ro = 0; ro < set->num_connectors; ro++) {
9985 if (set->connectors[ro] == &connector->base)
9986 new_crtc = set->crtc;
9989 /* Make sure the new CRTC will work with the encoder */
9990 if (!intel_encoder_crtc_ok(&connector->new_encoder->base,
9994 connector->encoder->new_crtc = to_intel_crtc(new_crtc);
9996 DRM_DEBUG_KMS("[CONNECTOR:%d:%s] to [CRTC:%d]\n",
9997 connector->base.base.id,
9998 drm_get_connector_name(&connector->base),
10002 /* Check for any encoders that needs to be disabled. */
10003 list_for_each_entry(encoder, &dev->mode_config.encoder_list,
10005 int num_connectors = 0;
10006 list_for_each_entry(connector,
10007 &dev->mode_config.connector_list,
10009 if (connector->new_encoder == encoder) {
10010 WARN_ON(!connector->new_encoder->new_crtc);
10015 if (num_connectors == 0)
10016 encoder->new_crtc = NULL;
10017 else if (num_connectors > 1)
10020 /* Only now check for crtc changes so we don't miss encoders
10021 * that will be disabled. */
10022 if (&encoder->new_crtc->base != encoder->base.crtc) {
10023 DRM_DEBUG_KMS("crtc changed, full mode switch\n");
10024 config->mode_changed = true;
10027 /* Now we've also updated encoder->new_crtc for all encoders. */
10029 list_for_each_entry(crtc, &dev->mode_config.crtc_list,
10031 crtc->new_enabled = false;
10033 list_for_each_entry(encoder,
10034 &dev->mode_config.encoder_list,
10036 if (encoder->new_crtc == crtc) {
10037 crtc->new_enabled = true;
10042 if (crtc->new_enabled != crtc->base.enabled) {
10043 DRM_DEBUG_KMS("crtc %sabled, full mode switch\n",
10044 crtc->new_enabled ? "en" : "dis");
10045 config->mode_changed = true;
10048 if (crtc->new_enabled)
10049 crtc->new_config = &crtc->config;
10051 crtc->new_config = NULL;
10057 static void disable_crtc_nofb(struct intel_crtc *crtc)
10059 struct drm_device *dev = crtc->base.dev;
10060 struct intel_encoder *encoder;
10061 struct intel_connector *connector;
10063 DRM_DEBUG_KMS("Trying to restore without FB -> disabling pipe %c\n",
10064 pipe_name(crtc->pipe));
10066 list_for_each_entry(connector, &dev->mode_config.connector_list, base.head) {
10067 if (connector->new_encoder &&
10068 connector->new_encoder->new_crtc == crtc)
10069 connector->new_encoder = NULL;
10072 list_for_each_entry(encoder, &dev->mode_config.encoder_list, base.head) {
10073 if (encoder->new_crtc == crtc)
10074 encoder->new_crtc = NULL;
10077 crtc->new_enabled = false;
10078 crtc->new_config = NULL;
10081 static int intel_crtc_set_config(struct drm_mode_set *set)
10083 struct drm_device *dev;
10084 struct drm_mode_set save_set;
10085 struct intel_set_config *config;
10089 BUG_ON(!set->crtc);
10090 BUG_ON(!set->crtc->helper_private);
10092 /* Enforce sane interface api - has been abused by the fb helper. */
10093 BUG_ON(!set->mode && set->fb);
10094 BUG_ON(set->fb && set->num_connectors == 0);
10097 DRM_DEBUG_KMS("[CRTC:%d] [FB:%d] #connectors=%d (x y) (%i %i)\n",
10098 set->crtc->base.id, set->fb->base.id,
10099 (int)set->num_connectors, set->x, set->y);
10101 DRM_DEBUG_KMS("[CRTC:%d] [NOFB]\n", set->crtc->base.id);
10104 dev = set->crtc->dev;
10107 config = kzalloc(sizeof(*config), GFP_KERNEL);
10111 ret = intel_set_config_save_state(dev, config);
10115 save_set.crtc = set->crtc;
10116 save_set.mode = &set->crtc->mode;
10117 save_set.x = set->crtc->x;
10118 save_set.y = set->crtc->y;
10119 save_set.fb = set->crtc->fb;
10121 /* Compute whether we need a full modeset, only an fb base update or no
10122 * change at all. In the future we might also check whether only the
10123 * mode changed, e.g. for LVDS where we only change the panel fitter in
10125 intel_set_config_compute_mode_changes(set, config);
10127 ret = intel_modeset_stage_output_state(dev, set, config);
10131 if (config->mode_changed) {
10132 ret = intel_set_mode(set->crtc, set->mode,
10133 set->x, set->y, set->fb);
10134 } else if (config->fb_changed) {
10135 intel_crtc_wait_for_pending_flips(set->crtc);
10137 ret = intel_pipe_set_base(set->crtc,
10138 set->x, set->y, set->fb);
10140 * In the fastboot case this may be our only check of the
10141 * state after boot. It would be better to only do it on
10142 * the first update, but we don't have a nice way of doing that
10143 * (and really, set_config isn't used much for high freq page
10144 * flipping, so increasing its cost here shouldn't be a big
10147 if (i915.fastboot && ret == 0)
10148 intel_modeset_check_state(set->crtc->dev);
10152 DRM_DEBUG_KMS("failed to set mode on [CRTC:%d], err = %d\n",
10153 set->crtc->base.id, ret);
10155 intel_set_config_restore_state(dev, config);
10158 * HACK: if the pipe was on, but we didn't have a framebuffer,
10159 * force the pipe off to avoid oopsing in the modeset code
10160 * due to fb==NULL. This should only happen during boot since
10161 * we don't yet reconstruct the FB from the hardware state.
10163 if (to_intel_crtc(save_set.crtc)->new_enabled && !save_set.fb)
10164 disable_crtc_nofb(to_intel_crtc(save_set.crtc));
10166 /* Try to restore the config */
10167 if (config->mode_changed &&
10168 intel_set_mode(save_set.crtc, save_set.mode,
10169 save_set.x, save_set.y, save_set.fb))
10170 DRM_ERROR("failed to restore config after modeset failure\n");
10174 intel_set_config_free(config);
10178 static const struct drm_crtc_funcs intel_crtc_funcs = {
10179 .cursor_set = intel_crtc_cursor_set,
10180 .cursor_move = intel_crtc_cursor_move,
10181 .gamma_set = intel_crtc_gamma_set,
10182 .set_config = intel_crtc_set_config,
10183 .destroy = intel_crtc_destroy,
10184 .page_flip = intel_crtc_page_flip,
10187 static void intel_cpu_pll_init(struct drm_device *dev)
10190 intel_ddi_pll_init(dev);
10193 static bool ibx_pch_dpll_get_hw_state(struct drm_i915_private *dev_priv,
10194 struct intel_shared_dpll *pll,
10195 struct intel_dpll_hw_state *hw_state)
10199 val = I915_READ(PCH_DPLL(pll->id));
10200 hw_state->dpll = val;
10201 hw_state->fp0 = I915_READ(PCH_FP0(pll->id));
10202 hw_state->fp1 = I915_READ(PCH_FP1(pll->id));
10204 return val & DPLL_VCO_ENABLE;
10207 static void ibx_pch_dpll_mode_set(struct drm_i915_private *dev_priv,
10208 struct intel_shared_dpll *pll)
10210 I915_WRITE(PCH_FP0(pll->id), pll->hw_state.fp0);
10211 I915_WRITE(PCH_FP1(pll->id), pll->hw_state.fp1);
10214 static void ibx_pch_dpll_enable(struct drm_i915_private *dev_priv,
10215 struct intel_shared_dpll *pll)
10217 /* PCH refclock must be enabled first */
10218 ibx_assert_pch_refclk_enabled(dev_priv);
10220 I915_WRITE(PCH_DPLL(pll->id), pll->hw_state.dpll);
10222 /* Wait for the clocks to stabilize. */
10223 POSTING_READ(PCH_DPLL(pll->id));
10226 /* The pixel multiplier can only be updated once the
10227 * DPLL is enabled and the clocks are stable.
10229 * So write it again.
10231 I915_WRITE(PCH_DPLL(pll->id), pll->hw_state.dpll);
10232 POSTING_READ(PCH_DPLL(pll->id));
10236 static void ibx_pch_dpll_disable(struct drm_i915_private *dev_priv,
10237 struct intel_shared_dpll *pll)
10239 struct drm_device *dev = dev_priv->dev;
10240 struct intel_crtc *crtc;
10242 /* Make sure no transcoder isn't still depending on us. */
10243 list_for_each_entry(crtc, &dev->mode_config.crtc_list, base.head) {
10244 if (intel_crtc_to_shared_dpll(crtc) == pll)
10245 assert_pch_transcoder_disabled(dev_priv, crtc->pipe);
10248 I915_WRITE(PCH_DPLL(pll->id), 0);
10249 POSTING_READ(PCH_DPLL(pll->id));
10253 static char *ibx_pch_dpll_names[] = {
10258 static void ibx_pch_dpll_init(struct drm_device *dev)
10260 struct drm_i915_private *dev_priv = dev->dev_private;
10263 dev_priv->num_shared_dpll = 2;
10265 for (i = 0; i < dev_priv->num_shared_dpll; i++) {
10266 dev_priv->shared_dplls[i].id = i;
10267 dev_priv->shared_dplls[i].name = ibx_pch_dpll_names[i];
10268 dev_priv->shared_dplls[i].mode_set = ibx_pch_dpll_mode_set;
10269 dev_priv->shared_dplls[i].enable = ibx_pch_dpll_enable;
10270 dev_priv->shared_dplls[i].disable = ibx_pch_dpll_disable;
10271 dev_priv->shared_dplls[i].get_hw_state =
10272 ibx_pch_dpll_get_hw_state;
10276 static void intel_shared_dpll_init(struct drm_device *dev)
10278 struct drm_i915_private *dev_priv = dev->dev_private;
10280 if (HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev))
10281 ibx_pch_dpll_init(dev);
10283 dev_priv->num_shared_dpll = 0;
10285 BUG_ON(dev_priv->num_shared_dpll > I915_NUM_PLLS);
10288 static void intel_crtc_init(struct drm_device *dev, int pipe)
10290 drm_i915_private_t *dev_priv = dev->dev_private;
10291 struct intel_crtc *intel_crtc;
10294 intel_crtc = kzalloc(sizeof(*intel_crtc), GFP_KERNEL);
10295 if (intel_crtc == NULL)
10298 drm_crtc_init(dev, &intel_crtc->base, &intel_crtc_funcs);
10300 drm_mode_crtc_set_gamma_size(&intel_crtc->base, 256);
10301 for (i = 0; i < 256; i++) {
10302 intel_crtc->lut_r[i] = i;
10303 intel_crtc->lut_g[i] = i;
10304 intel_crtc->lut_b[i] = i;
10308 * On gen2/3 only plane A can do fbc, but the panel fitter and lvds port
10309 * is hooked to plane B. Hence we want plane A feeding pipe B.
10311 intel_crtc->pipe = pipe;
10312 intel_crtc->plane = pipe;
10313 if (HAS_FBC(dev) && INTEL_INFO(dev)->gen < 4) {
10314 DRM_DEBUG_KMS("swapping pipes & planes for FBC\n");
10315 intel_crtc->plane = !pipe;
10318 BUG_ON(pipe >= ARRAY_SIZE(dev_priv->plane_to_crtc_mapping) ||
10319 dev_priv->plane_to_crtc_mapping[intel_crtc->plane] != NULL);
10320 dev_priv->plane_to_crtc_mapping[intel_crtc->plane] = &intel_crtc->base;
10321 dev_priv->pipe_to_crtc_mapping[intel_crtc->pipe] = &intel_crtc->base;
10323 drm_crtc_helper_add(&intel_crtc->base, &intel_helper_funcs);
10326 enum pipe intel_get_pipe_from_connector(struct intel_connector *connector)
10328 struct drm_encoder *encoder = connector->base.encoder;
10330 WARN_ON(!mutex_is_locked(&connector->base.dev->mode_config.mutex));
10333 return INVALID_PIPE;
10335 return to_intel_crtc(encoder->crtc)->pipe;
10338 int intel_get_pipe_from_crtc_id(struct drm_device *dev, void *data,
10339 struct drm_file *file)
10341 struct drm_i915_get_pipe_from_crtc_id *pipe_from_crtc_id = data;
10342 struct drm_mode_object *drmmode_obj;
10343 struct intel_crtc *crtc;
10345 if (!drm_core_check_feature(dev, DRIVER_MODESET))
10348 drmmode_obj = drm_mode_object_find(dev, pipe_from_crtc_id->crtc_id,
10349 DRM_MODE_OBJECT_CRTC);
10351 if (!drmmode_obj) {
10352 DRM_ERROR("no such CRTC id\n");
10356 crtc = to_intel_crtc(obj_to_crtc(drmmode_obj));
10357 pipe_from_crtc_id->pipe = crtc->pipe;
10362 static int intel_encoder_clones(struct intel_encoder *encoder)
10364 struct drm_device *dev = encoder->base.dev;
10365 struct intel_encoder *source_encoder;
10366 int index_mask = 0;
10369 list_for_each_entry(source_encoder,
10370 &dev->mode_config.encoder_list, base.head) {
10372 if (encoder == source_encoder)
10373 index_mask |= (1 << entry);
10375 /* Intel hw has only one MUX where enocoders could be cloned. */
10376 if (encoder->cloneable && source_encoder->cloneable)
10377 index_mask |= (1 << entry);
10385 static bool has_edp_a(struct drm_device *dev)
10387 struct drm_i915_private *dev_priv = dev->dev_private;
10389 if (!IS_MOBILE(dev))
10392 if ((I915_READ(DP_A) & DP_DETECTED) == 0)
10395 if (IS_GEN5(dev) &&
10396 (I915_READ(ILK_DISPLAY_CHICKEN_FUSES) & ILK_eDP_A_DISABLE))
10402 const char *intel_output_name(int output)
10404 static const char *names[] = {
10405 [INTEL_OUTPUT_UNUSED] = "Unused",
10406 [INTEL_OUTPUT_ANALOG] = "Analog",
10407 [INTEL_OUTPUT_DVO] = "DVO",
10408 [INTEL_OUTPUT_SDVO] = "SDVO",
10409 [INTEL_OUTPUT_LVDS] = "LVDS",
10410 [INTEL_OUTPUT_TVOUT] = "TV",
10411 [INTEL_OUTPUT_HDMI] = "HDMI",
10412 [INTEL_OUTPUT_DISPLAYPORT] = "DisplayPort",
10413 [INTEL_OUTPUT_EDP] = "eDP",
10414 [INTEL_OUTPUT_DSI] = "DSI",
10415 [INTEL_OUTPUT_UNKNOWN] = "Unknown",
10418 if (output < 0 || output >= ARRAY_SIZE(names) || !names[output])
10421 return names[output];
10424 static void intel_setup_outputs(struct drm_device *dev)
10426 struct drm_i915_private *dev_priv = dev->dev_private;
10427 struct intel_encoder *encoder;
10428 bool dpd_is_edp = false;
10430 intel_lvds_init(dev);
10433 intel_crt_init(dev);
10435 if (HAS_DDI(dev)) {
10438 /* Haswell uses DDI functions to detect digital outputs */
10439 found = I915_READ(DDI_BUF_CTL_A) & DDI_INIT_DISPLAY_DETECTED;
10440 /* DDI A only supports eDP */
10442 intel_ddi_init(dev, PORT_A);
10444 /* DDI B, C and D detection is indicated by the SFUSE_STRAP
10446 found = I915_READ(SFUSE_STRAP);
10448 if (found & SFUSE_STRAP_DDIB_DETECTED)
10449 intel_ddi_init(dev, PORT_B);
10450 if (found & SFUSE_STRAP_DDIC_DETECTED)
10451 intel_ddi_init(dev, PORT_C);
10452 if (found & SFUSE_STRAP_DDID_DETECTED)
10453 intel_ddi_init(dev, PORT_D);
10454 } else if (HAS_PCH_SPLIT(dev)) {
10456 dpd_is_edp = intel_dp_is_edp(dev, PORT_D);
10458 if (has_edp_a(dev))
10459 intel_dp_init(dev, DP_A, PORT_A);
10461 if (I915_READ(PCH_HDMIB) & SDVO_DETECTED) {
10462 /* PCH SDVOB multiplex with HDMIB */
10463 found = intel_sdvo_init(dev, PCH_SDVOB, true);
10465 intel_hdmi_init(dev, PCH_HDMIB, PORT_B);
10466 if (!found && (I915_READ(PCH_DP_B) & DP_DETECTED))
10467 intel_dp_init(dev, PCH_DP_B, PORT_B);
10470 if (I915_READ(PCH_HDMIC) & SDVO_DETECTED)
10471 intel_hdmi_init(dev, PCH_HDMIC, PORT_C);
10473 if (!dpd_is_edp && I915_READ(PCH_HDMID) & SDVO_DETECTED)
10474 intel_hdmi_init(dev, PCH_HDMID, PORT_D);
10476 if (I915_READ(PCH_DP_C) & DP_DETECTED)
10477 intel_dp_init(dev, PCH_DP_C, PORT_C);
10479 if (I915_READ(PCH_DP_D) & DP_DETECTED)
10480 intel_dp_init(dev, PCH_DP_D, PORT_D);
10481 } else if (IS_VALLEYVIEW(dev)) {
10482 if (I915_READ(VLV_DISPLAY_BASE + GEN4_HDMIB) & SDVO_DETECTED) {
10483 intel_hdmi_init(dev, VLV_DISPLAY_BASE + GEN4_HDMIB,
10485 if (I915_READ(VLV_DISPLAY_BASE + DP_B) & DP_DETECTED)
10486 intel_dp_init(dev, VLV_DISPLAY_BASE + DP_B, PORT_B);
10489 if (I915_READ(VLV_DISPLAY_BASE + GEN4_HDMIC) & SDVO_DETECTED) {
10490 intel_hdmi_init(dev, VLV_DISPLAY_BASE + GEN4_HDMIC,
10492 if (I915_READ(VLV_DISPLAY_BASE + DP_C) & DP_DETECTED)
10493 intel_dp_init(dev, VLV_DISPLAY_BASE + DP_C, PORT_C);
10496 intel_dsi_init(dev);
10497 } else if (SUPPORTS_DIGITAL_OUTPUTS(dev)) {
10498 bool found = false;
10500 if (I915_READ(GEN3_SDVOB) & SDVO_DETECTED) {
10501 DRM_DEBUG_KMS("probing SDVOB\n");
10502 found = intel_sdvo_init(dev, GEN3_SDVOB, true);
10503 if (!found && SUPPORTS_INTEGRATED_HDMI(dev)) {
10504 DRM_DEBUG_KMS("probing HDMI on SDVOB\n");
10505 intel_hdmi_init(dev, GEN4_HDMIB, PORT_B);
10508 if (!found && SUPPORTS_INTEGRATED_DP(dev))
10509 intel_dp_init(dev, DP_B, PORT_B);
10512 /* Before G4X SDVOC doesn't have its own detect register */
10514 if (I915_READ(GEN3_SDVOB) & SDVO_DETECTED) {
10515 DRM_DEBUG_KMS("probing SDVOC\n");
10516 found = intel_sdvo_init(dev, GEN3_SDVOC, false);
10519 if (!found && (I915_READ(GEN3_SDVOC) & SDVO_DETECTED)) {
10521 if (SUPPORTS_INTEGRATED_HDMI(dev)) {
10522 DRM_DEBUG_KMS("probing HDMI on SDVOC\n");
10523 intel_hdmi_init(dev, GEN4_HDMIC, PORT_C);
10525 if (SUPPORTS_INTEGRATED_DP(dev))
10526 intel_dp_init(dev, DP_C, PORT_C);
10529 if (SUPPORTS_INTEGRATED_DP(dev) &&
10530 (I915_READ(DP_D) & DP_DETECTED))
10531 intel_dp_init(dev, DP_D, PORT_D);
10532 } else if (IS_GEN2(dev))
10533 intel_dvo_init(dev);
10535 if (SUPPORTS_TV(dev))
10536 intel_tv_init(dev);
10538 list_for_each_entry(encoder, &dev->mode_config.encoder_list, base.head) {
10539 encoder->base.possible_crtcs = encoder->crtc_mask;
10540 encoder->base.possible_clones =
10541 intel_encoder_clones(encoder);
10544 intel_init_pch_refclk(dev);
10546 drm_helper_move_panel_connectors_to_head(dev);
10549 void intel_framebuffer_fini(struct intel_framebuffer *fb)
10551 drm_framebuffer_cleanup(&fb->base);
10552 WARN_ON(!fb->obj->framebuffer_references--);
10553 drm_gem_object_unreference_unlocked(&fb->obj->base);
10556 static void intel_user_framebuffer_destroy(struct drm_framebuffer *fb)
10558 struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
10560 intel_framebuffer_fini(intel_fb);
10564 static int intel_user_framebuffer_create_handle(struct drm_framebuffer *fb,
10565 struct drm_file *file,
10566 unsigned int *handle)
10568 struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
10569 struct drm_i915_gem_object *obj = intel_fb->obj;
10571 return drm_gem_handle_create(file, &obj->base, handle);
10574 static const struct drm_framebuffer_funcs intel_fb_funcs = {
10575 .destroy = intel_user_framebuffer_destroy,
10576 .create_handle = intel_user_framebuffer_create_handle,
10579 int intel_framebuffer_init(struct drm_device *dev,
10580 struct intel_framebuffer *intel_fb,
10581 struct drm_mode_fb_cmd2 *mode_cmd,
10582 struct drm_i915_gem_object *obj)
10584 int aligned_height, tile_height;
10588 WARN_ON(!mutex_is_locked(&dev->struct_mutex));
10590 if (obj->tiling_mode == I915_TILING_Y) {
10591 DRM_DEBUG("hardware does not support tiling Y\n");
10595 if (mode_cmd->pitches[0] & 63) {
10596 DRM_DEBUG("pitch (%d) must be at least 64 byte aligned\n",
10597 mode_cmd->pitches[0]);
10601 if (INTEL_INFO(dev)->gen >= 5 && !IS_VALLEYVIEW(dev)) {
10602 pitch_limit = 32*1024;
10603 } else if (INTEL_INFO(dev)->gen >= 4) {
10604 if (obj->tiling_mode)
10605 pitch_limit = 16*1024;
10607 pitch_limit = 32*1024;
10608 } else if (INTEL_INFO(dev)->gen >= 3) {
10609 if (obj->tiling_mode)
10610 pitch_limit = 8*1024;
10612 pitch_limit = 16*1024;
10614 /* XXX DSPC is limited to 4k tiled */
10615 pitch_limit = 8*1024;
10617 if (mode_cmd->pitches[0] > pitch_limit) {
10618 DRM_DEBUG("%s pitch (%d) must be at less than %d\n",
10619 obj->tiling_mode ? "tiled" : "linear",
10620 mode_cmd->pitches[0], pitch_limit);
10624 if (obj->tiling_mode != I915_TILING_NONE &&
10625 mode_cmd->pitches[0] != obj->stride) {
10626 DRM_DEBUG("pitch (%d) must match tiling stride (%d)\n",
10627 mode_cmd->pitches[0], obj->stride);
10631 /* Reject formats not supported by any plane early. */
10632 switch (mode_cmd->pixel_format) {
10633 case DRM_FORMAT_C8:
10634 case DRM_FORMAT_RGB565:
10635 case DRM_FORMAT_XRGB8888:
10636 case DRM_FORMAT_ARGB8888:
10638 case DRM_FORMAT_XRGB1555:
10639 case DRM_FORMAT_ARGB1555:
10640 if (INTEL_INFO(dev)->gen > 3) {
10641 DRM_DEBUG("unsupported pixel format: %s\n",
10642 drm_get_format_name(mode_cmd->pixel_format));
10646 case DRM_FORMAT_XBGR8888:
10647 case DRM_FORMAT_ABGR8888:
10648 case DRM_FORMAT_XRGB2101010:
10649 case DRM_FORMAT_ARGB2101010:
10650 case DRM_FORMAT_XBGR2101010:
10651 case DRM_FORMAT_ABGR2101010:
10652 if (INTEL_INFO(dev)->gen < 4) {
10653 DRM_DEBUG("unsupported pixel format: %s\n",
10654 drm_get_format_name(mode_cmd->pixel_format));
10658 case DRM_FORMAT_YUYV:
10659 case DRM_FORMAT_UYVY:
10660 case DRM_FORMAT_YVYU:
10661 case DRM_FORMAT_VYUY:
10662 if (INTEL_INFO(dev)->gen < 5) {
10663 DRM_DEBUG("unsupported pixel format: %s\n",
10664 drm_get_format_name(mode_cmd->pixel_format));
10669 DRM_DEBUG("unsupported pixel format: %s\n",
10670 drm_get_format_name(mode_cmd->pixel_format));
10674 /* FIXME need to adjust LINOFF/TILEOFF accordingly. */
10675 if (mode_cmd->offsets[0] != 0)
10678 tile_height = IS_GEN2(dev) ? 16 : 8;
10679 aligned_height = ALIGN(mode_cmd->height,
10680 obj->tiling_mode ? tile_height : 1);
10681 /* FIXME drm helper for size checks (especially planar formats)? */
10682 if (obj->base.size < aligned_height * mode_cmd->pitches[0])
10685 drm_helper_mode_fill_fb_struct(&intel_fb->base, mode_cmd);
10686 intel_fb->obj = obj;
10687 intel_fb->obj->framebuffer_references++;
10689 ret = drm_framebuffer_init(dev, &intel_fb->base, &intel_fb_funcs);
10691 DRM_ERROR("framebuffer init failed %d\n", ret);
10698 static struct drm_framebuffer *
10699 intel_user_framebuffer_create(struct drm_device *dev,
10700 struct drm_file *filp,
10701 struct drm_mode_fb_cmd2 *mode_cmd)
10703 struct drm_i915_gem_object *obj;
10705 obj = to_intel_bo(drm_gem_object_lookup(dev, filp,
10706 mode_cmd->handles[0]));
10707 if (&obj->base == NULL)
10708 return ERR_PTR(-ENOENT);
10710 return intel_framebuffer_create(dev, mode_cmd, obj);
10713 #ifndef CONFIG_DRM_I915_FBDEV
10714 static inline void intel_fbdev_output_poll_changed(struct drm_device *dev)
10719 static const struct drm_mode_config_funcs intel_mode_funcs = {
10720 .fb_create = intel_user_framebuffer_create,
10721 .output_poll_changed = intel_fbdev_output_poll_changed,
10724 /* Set up chip specific display functions */
10725 static void intel_init_display(struct drm_device *dev)
10727 struct drm_i915_private *dev_priv = dev->dev_private;
10729 if (HAS_PCH_SPLIT(dev) || IS_G4X(dev))
10730 dev_priv->display.find_dpll = g4x_find_best_dpll;
10731 else if (IS_VALLEYVIEW(dev))
10732 dev_priv->display.find_dpll = vlv_find_best_dpll;
10733 else if (IS_PINEVIEW(dev))
10734 dev_priv->display.find_dpll = pnv_find_best_dpll;
10736 dev_priv->display.find_dpll = i9xx_find_best_dpll;
10738 if (HAS_DDI(dev)) {
10739 dev_priv->display.get_pipe_config = haswell_get_pipe_config;
10740 dev_priv->display.crtc_mode_set = haswell_crtc_mode_set;
10741 dev_priv->display.crtc_enable = haswell_crtc_enable;
10742 dev_priv->display.crtc_disable = haswell_crtc_disable;
10743 dev_priv->display.off = haswell_crtc_off;
10744 dev_priv->display.update_plane = ironlake_update_plane;
10745 } else if (HAS_PCH_SPLIT(dev)) {
10746 dev_priv->display.get_pipe_config = ironlake_get_pipe_config;
10747 dev_priv->display.crtc_mode_set = ironlake_crtc_mode_set;
10748 dev_priv->display.crtc_enable = ironlake_crtc_enable;
10749 dev_priv->display.crtc_disable = ironlake_crtc_disable;
10750 dev_priv->display.off = ironlake_crtc_off;
10751 dev_priv->display.update_plane = ironlake_update_plane;
10752 } else if (IS_VALLEYVIEW(dev)) {
10753 dev_priv->display.get_pipe_config = i9xx_get_pipe_config;
10754 dev_priv->display.crtc_mode_set = i9xx_crtc_mode_set;
10755 dev_priv->display.crtc_enable = valleyview_crtc_enable;
10756 dev_priv->display.crtc_disable = i9xx_crtc_disable;
10757 dev_priv->display.off = i9xx_crtc_off;
10758 dev_priv->display.update_plane = i9xx_update_plane;
10760 dev_priv->display.get_pipe_config = i9xx_get_pipe_config;
10761 dev_priv->display.crtc_mode_set = i9xx_crtc_mode_set;
10762 dev_priv->display.crtc_enable = i9xx_crtc_enable;
10763 dev_priv->display.crtc_disable = i9xx_crtc_disable;
10764 dev_priv->display.off = i9xx_crtc_off;
10765 dev_priv->display.update_plane = i9xx_update_plane;
10768 /* Returns the core display clock speed */
10769 if (IS_VALLEYVIEW(dev))
10770 dev_priv->display.get_display_clock_speed =
10771 valleyview_get_display_clock_speed;
10772 else if (IS_I945G(dev) || (IS_G33(dev) && !IS_PINEVIEW_M(dev)))
10773 dev_priv->display.get_display_clock_speed =
10774 i945_get_display_clock_speed;
10775 else if (IS_I915G(dev))
10776 dev_priv->display.get_display_clock_speed =
10777 i915_get_display_clock_speed;
10778 else if (IS_I945GM(dev) || IS_845G(dev))
10779 dev_priv->display.get_display_clock_speed =
10780 i9xx_misc_get_display_clock_speed;
10781 else if (IS_PINEVIEW(dev))
10782 dev_priv->display.get_display_clock_speed =
10783 pnv_get_display_clock_speed;
10784 else if (IS_I915GM(dev))
10785 dev_priv->display.get_display_clock_speed =
10786 i915gm_get_display_clock_speed;
10787 else if (IS_I865G(dev))
10788 dev_priv->display.get_display_clock_speed =
10789 i865_get_display_clock_speed;
10790 else if (IS_I85X(dev))
10791 dev_priv->display.get_display_clock_speed =
10792 i855_get_display_clock_speed;
10793 else /* 852, 830 */
10794 dev_priv->display.get_display_clock_speed =
10795 i830_get_display_clock_speed;
10797 if (HAS_PCH_SPLIT(dev)) {
10798 if (IS_GEN5(dev)) {
10799 dev_priv->display.fdi_link_train = ironlake_fdi_link_train;
10800 dev_priv->display.write_eld = ironlake_write_eld;
10801 } else if (IS_GEN6(dev)) {
10802 dev_priv->display.fdi_link_train = gen6_fdi_link_train;
10803 dev_priv->display.write_eld = ironlake_write_eld;
10804 } else if (IS_IVYBRIDGE(dev)) {
10805 /* FIXME: detect B0+ stepping and use auto training */
10806 dev_priv->display.fdi_link_train = ivb_manual_fdi_link_train;
10807 dev_priv->display.write_eld = ironlake_write_eld;
10808 dev_priv->display.modeset_global_resources =
10809 ivb_modeset_global_resources;
10810 } else if (IS_HASWELL(dev) || IS_GEN8(dev)) {
10811 dev_priv->display.fdi_link_train = hsw_fdi_link_train;
10812 dev_priv->display.write_eld = haswell_write_eld;
10813 dev_priv->display.modeset_global_resources =
10814 haswell_modeset_global_resources;
10816 } else if (IS_G4X(dev)) {
10817 dev_priv->display.write_eld = g4x_write_eld;
10818 } else if (IS_VALLEYVIEW(dev)) {
10819 dev_priv->display.modeset_global_resources =
10820 valleyview_modeset_global_resources;
10821 dev_priv->display.write_eld = ironlake_write_eld;
10824 /* Default just returns -ENODEV to indicate unsupported */
10825 dev_priv->display.queue_flip = intel_default_queue_flip;
10827 switch (INTEL_INFO(dev)->gen) {
10829 dev_priv->display.queue_flip = intel_gen2_queue_flip;
10833 dev_priv->display.queue_flip = intel_gen3_queue_flip;
10838 dev_priv->display.queue_flip = intel_gen4_queue_flip;
10842 dev_priv->display.queue_flip = intel_gen6_queue_flip;
10845 case 8: /* FIXME(BDW): Check that the gen8 RCS flip works. */
10846 dev_priv->display.queue_flip = intel_gen7_queue_flip;
10850 intel_panel_init_backlight_funcs(dev);
10854 * Some BIOSes insist on assuming the GPU's pipe A is enabled at suspend,
10855 * resume, or other times. This quirk makes sure that's the case for
10856 * affected systems.
10858 static void quirk_pipea_force(struct drm_device *dev)
10860 struct drm_i915_private *dev_priv = dev->dev_private;
10862 dev_priv->quirks |= QUIRK_PIPEA_FORCE;
10863 DRM_INFO("applying pipe a force quirk\n");
10867 * Some machines (Lenovo U160) do not work with SSC on LVDS for some reason
10869 static void quirk_ssc_force_disable(struct drm_device *dev)
10871 struct drm_i915_private *dev_priv = dev->dev_private;
10872 dev_priv->quirks |= QUIRK_LVDS_SSC_DISABLE;
10873 DRM_INFO("applying lvds SSC disable quirk\n");
10877 * A machine (e.g. Acer Aspire 5734Z) may need to invert the panel backlight
10880 static void quirk_invert_brightness(struct drm_device *dev)
10882 struct drm_i915_private *dev_priv = dev->dev_private;
10883 dev_priv->quirks |= QUIRK_INVERT_BRIGHTNESS;
10884 DRM_INFO("applying inverted panel brightness quirk\n");
10887 struct intel_quirk {
10889 int subsystem_vendor;
10890 int subsystem_device;
10891 void (*hook)(struct drm_device *dev);
10894 /* For systems that don't have a meaningful PCI subdevice/subvendor ID */
10895 struct intel_dmi_quirk {
10896 void (*hook)(struct drm_device *dev);
10897 const struct dmi_system_id (*dmi_id_list)[];
10900 static int intel_dmi_reverse_brightness(const struct dmi_system_id *id)
10902 DRM_INFO("Backlight polarity reversed on %s\n", id->ident);
10906 static const struct intel_dmi_quirk intel_dmi_quirks[] = {
10908 .dmi_id_list = &(const struct dmi_system_id[]) {
10910 .callback = intel_dmi_reverse_brightness,
10911 .ident = "NCR Corporation",
10912 .matches = {DMI_MATCH(DMI_SYS_VENDOR, "NCR Corporation"),
10913 DMI_MATCH(DMI_PRODUCT_NAME, ""),
10916 { } /* terminating entry */
10918 .hook = quirk_invert_brightness,
10922 static struct intel_quirk intel_quirks[] = {
10923 /* HP Mini needs pipe A force quirk (LP: #322104) */
10924 { 0x27ae, 0x103c, 0x361a, quirk_pipea_force },
10926 /* Toshiba Protege R-205, S-209 needs pipe A force quirk */
10927 { 0x2592, 0x1179, 0x0001, quirk_pipea_force },
10929 /* ThinkPad T60 needs pipe A force quirk (bug #16494) */
10930 { 0x2782, 0x17aa, 0x201a, quirk_pipea_force },
10932 /* 830 needs to leave pipe A & dpll A up */
10933 { 0x3577, PCI_ANY_ID, PCI_ANY_ID, quirk_pipea_force },
10935 /* Lenovo U160 cannot use SSC on LVDS */
10936 { 0x0046, 0x17aa, 0x3920, quirk_ssc_force_disable },
10938 /* Sony Vaio Y cannot use SSC on LVDS */
10939 { 0x0046, 0x104d, 0x9076, quirk_ssc_force_disable },
10941 /* Acer Aspire 5734Z must invert backlight brightness */
10942 { 0x2a42, 0x1025, 0x0459, quirk_invert_brightness },
10944 /* Acer/eMachines G725 */
10945 { 0x2a42, 0x1025, 0x0210, quirk_invert_brightness },
10947 /* Acer/eMachines e725 */
10948 { 0x2a42, 0x1025, 0x0212, quirk_invert_brightness },
10950 /* Acer/Packard Bell NCL20 */
10951 { 0x2a42, 0x1025, 0x034b, quirk_invert_brightness },
10953 /* Acer Aspire 4736Z */
10954 { 0x2a42, 0x1025, 0x0260, quirk_invert_brightness },
10956 /* Acer Aspire 5336 */
10957 { 0x2a42, 0x1025, 0x048a, quirk_invert_brightness },
10960 static void intel_init_quirks(struct drm_device *dev)
10962 struct pci_dev *d = dev->pdev;
10965 for (i = 0; i < ARRAY_SIZE(intel_quirks); i++) {
10966 struct intel_quirk *q = &intel_quirks[i];
10968 if (d->device == q->device &&
10969 (d->subsystem_vendor == q->subsystem_vendor ||
10970 q->subsystem_vendor == PCI_ANY_ID) &&
10971 (d->subsystem_device == q->subsystem_device ||
10972 q->subsystem_device == PCI_ANY_ID))
10975 for (i = 0; i < ARRAY_SIZE(intel_dmi_quirks); i++) {
10976 if (dmi_check_system(*intel_dmi_quirks[i].dmi_id_list) != 0)
10977 intel_dmi_quirks[i].hook(dev);
10981 /* Disable the VGA plane that we never use */
10982 static void i915_disable_vga(struct drm_device *dev)
10984 struct drm_i915_private *dev_priv = dev->dev_private;
10986 u32 vga_reg = i915_vgacntrl_reg(dev);
10988 /* WaEnableVGAAccessThroughIOPort:ctg,elk,ilk,snb,ivb,vlv,hsw */
10989 vga_get_uninterruptible(dev->pdev, VGA_RSRC_LEGACY_IO);
10990 outb(SR01, VGA_SR_INDEX);
10991 sr1 = inb(VGA_SR_DATA);
10992 outb(sr1 | 1<<5, VGA_SR_DATA);
10993 vga_put(dev->pdev, VGA_RSRC_LEGACY_IO);
10996 I915_WRITE(vga_reg, VGA_DISP_DISABLE);
10997 POSTING_READ(vga_reg);
11000 void intel_modeset_init_hw(struct drm_device *dev)
11002 intel_prepare_ddi(dev);
11004 intel_init_clock_gating(dev);
11006 intel_reset_dpio(dev);
11008 mutex_lock(&dev->struct_mutex);
11009 intel_enable_gt_powersave(dev);
11010 mutex_unlock(&dev->struct_mutex);
11013 void intel_modeset_suspend_hw(struct drm_device *dev)
11015 intel_suspend_hw(dev);
11018 void intel_modeset_init(struct drm_device *dev)
11020 struct drm_i915_private *dev_priv = dev->dev_private;
11023 drm_mode_config_init(dev);
11025 dev->mode_config.min_width = 0;
11026 dev->mode_config.min_height = 0;
11028 dev->mode_config.preferred_depth = 24;
11029 dev->mode_config.prefer_shadow = 1;
11031 dev->mode_config.funcs = &intel_mode_funcs;
11033 intel_init_quirks(dev);
11035 intel_init_pm(dev);
11037 if (INTEL_INFO(dev)->num_pipes == 0)
11040 intel_init_display(dev);
11042 if (IS_GEN2(dev)) {
11043 dev->mode_config.max_width = 2048;
11044 dev->mode_config.max_height = 2048;
11045 } else if (IS_GEN3(dev)) {
11046 dev->mode_config.max_width = 4096;
11047 dev->mode_config.max_height = 4096;
11049 dev->mode_config.max_width = 8192;
11050 dev->mode_config.max_height = 8192;
11052 dev->mode_config.fb_base = dev_priv->gtt.mappable_base;
11054 DRM_DEBUG_KMS("%d display pipe%s available.\n",
11055 INTEL_INFO(dev)->num_pipes,
11056 INTEL_INFO(dev)->num_pipes > 1 ? "s" : "");
11059 intel_crtc_init(dev, i);
11060 for (j = 0; j < dev_priv->num_plane; j++) {
11061 ret = intel_plane_init(dev, i, j);
11063 DRM_DEBUG_KMS("pipe %c sprite %c init failed: %d\n",
11064 pipe_name(i), sprite_name(i, j), ret);
11068 intel_init_dpio(dev);
11069 intel_reset_dpio(dev);
11071 intel_cpu_pll_init(dev);
11072 intel_shared_dpll_init(dev);
11074 /* Just disable it once at startup */
11075 i915_disable_vga(dev);
11076 intel_setup_outputs(dev);
11078 /* Just in case the BIOS is doing something questionable. */
11079 intel_disable_fbc(dev);
11083 intel_connector_break_all_links(struct intel_connector *connector)
11085 connector->base.dpms = DRM_MODE_DPMS_OFF;
11086 connector->base.encoder = NULL;
11087 connector->encoder->connectors_active = false;
11088 connector->encoder->base.crtc = NULL;
11091 static void intel_enable_pipe_a(struct drm_device *dev)
11093 struct intel_connector *connector;
11094 struct drm_connector *crt = NULL;
11095 struct intel_load_detect_pipe load_detect_temp;
11097 /* We can't just switch on the pipe A, we need to set things up with a
11098 * proper mode and output configuration. As a gross hack, enable pipe A
11099 * by enabling the load detect pipe once. */
11100 list_for_each_entry(connector,
11101 &dev->mode_config.connector_list,
11103 if (connector->encoder->type == INTEL_OUTPUT_ANALOG) {
11104 crt = &connector->base;
11112 if (intel_get_load_detect_pipe(crt, NULL, &load_detect_temp))
11113 intel_release_load_detect_pipe(crt, &load_detect_temp);
11119 intel_check_plane_mapping(struct intel_crtc *crtc)
11121 struct drm_device *dev = crtc->base.dev;
11122 struct drm_i915_private *dev_priv = dev->dev_private;
11125 if (INTEL_INFO(dev)->num_pipes == 1)
11128 reg = DSPCNTR(!crtc->plane);
11129 val = I915_READ(reg);
11131 if ((val & DISPLAY_PLANE_ENABLE) &&
11132 (!!(val & DISPPLANE_SEL_PIPE_MASK) == crtc->pipe))
11138 static void intel_sanitize_crtc(struct intel_crtc *crtc)
11140 struct drm_device *dev = crtc->base.dev;
11141 struct drm_i915_private *dev_priv = dev->dev_private;
11144 /* Clear any frame start delays used for debugging left by the BIOS */
11145 reg = PIPECONF(crtc->config.cpu_transcoder);
11146 I915_WRITE(reg, I915_READ(reg) & ~PIPECONF_FRAME_START_DELAY_MASK);
11148 /* We need to sanitize the plane -> pipe mapping first because this will
11149 * disable the crtc (and hence change the state) if it is wrong. Note
11150 * that gen4+ has a fixed plane -> pipe mapping. */
11151 if (INTEL_INFO(dev)->gen < 4 && !intel_check_plane_mapping(crtc)) {
11152 struct intel_connector *connector;
11155 DRM_DEBUG_KMS("[CRTC:%d] wrong plane connection detected!\n",
11156 crtc->base.base.id);
11158 /* Pipe has the wrong plane attached and the plane is active.
11159 * Temporarily change the plane mapping and disable everything
11161 plane = crtc->plane;
11162 crtc->plane = !plane;
11163 dev_priv->display.crtc_disable(&crtc->base);
11164 crtc->plane = plane;
11166 /* ... and break all links. */
11167 list_for_each_entry(connector, &dev->mode_config.connector_list,
11169 if (connector->encoder->base.crtc != &crtc->base)
11172 intel_connector_break_all_links(connector);
11175 WARN_ON(crtc->active);
11176 crtc->base.enabled = false;
11179 if (dev_priv->quirks & QUIRK_PIPEA_FORCE &&
11180 crtc->pipe == PIPE_A && !crtc->active) {
11181 /* BIOS forgot to enable pipe A, this mostly happens after
11182 * resume. Force-enable the pipe to fix this, the update_dpms
11183 * call below we restore the pipe to the right state, but leave
11184 * the required bits on. */
11185 intel_enable_pipe_a(dev);
11188 /* Adjust the state of the output pipe according to whether we
11189 * have active connectors/encoders. */
11190 intel_crtc_update_dpms(&crtc->base);
11192 if (crtc->active != crtc->base.enabled) {
11193 struct intel_encoder *encoder;
11195 /* This can happen either due to bugs in the get_hw_state
11196 * functions or because the pipe is force-enabled due to the
11198 DRM_DEBUG_KMS("[CRTC:%d] hw state adjusted, was %s, now %s\n",
11199 crtc->base.base.id,
11200 crtc->base.enabled ? "enabled" : "disabled",
11201 crtc->active ? "enabled" : "disabled");
11203 crtc->base.enabled = crtc->active;
11205 /* Because we only establish the connector -> encoder ->
11206 * crtc links if something is active, this means the
11207 * crtc is now deactivated. Break the links. connector
11208 * -> encoder links are only establish when things are
11209 * actually up, hence no need to break them. */
11210 WARN_ON(crtc->active);
11212 for_each_encoder_on_crtc(dev, &crtc->base, encoder) {
11213 WARN_ON(encoder->connectors_active);
11214 encoder->base.crtc = NULL;
11219 static void intel_sanitize_encoder(struct intel_encoder *encoder)
11221 struct intel_connector *connector;
11222 struct drm_device *dev = encoder->base.dev;
11224 /* We need to check both for a crtc link (meaning that the
11225 * encoder is active and trying to read from a pipe) and the
11226 * pipe itself being active. */
11227 bool has_active_crtc = encoder->base.crtc &&
11228 to_intel_crtc(encoder->base.crtc)->active;
11230 if (encoder->connectors_active && !has_active_crtc) {
11231 DRM_DEBUG_KMS("[ENCODER:%d:%s] has active connectors but no active pipe!\n",
11232 encoder->base.base.id,
11233 drm_get_encoder_name(&encoder->base));
11235 /* Connector is active, but has no active pipe. This is
11236 * fallout from our resume register restoring. Disable
11237 * the encoder manually again. */
11238 if (encoder->base.crtc) {
11239 DRM_DEBUG_KMS("[ENCODER:%d:%s] manually disabled\n",
11240 encoder->base.base.id,
11241 drm_get_encoder_name(&encoder->base));
11242 encoder->disable(encoder);
11245 /* Inconsistent output/port/pipe state happens presumably due to
11246 * a bug in one of the get_hw_state functions. Or someplace else
11247 * in our code, like the register restore mess on resume. Clamp
11248 * things to off as a safer default. */
11249 list_for_each_entry(connector,
11250 &dev->mode_config.connector_list,
11252 if (connector->encoder != encoder)
11255 intel_connector_break_all_links(connector);
11258 /* Enabled encoders without active connectors will be fixed in
11259 * the crtc fixup. */
11262 void i915_redisable_vga(struct drm_device *dev)
11264 struct drm_i915_private *dev_priv = dev->dev_private;
11265 u32 vga_reg = i915_vgacntrl_reg(dev);
11267 /* This function can be called both from intel_modeset_setup_hw_state or
11268 * at a very early point in our resume sequence, where the power well
11269 * structures are not yet restored. Since this function is at a very
11270 * paranoid "someone might have enabled VGA while we were not looking"
11271 * level, just check if the power well is enabled instead of trying to
11272 * follow the "don't touch the power well if we don't need it" policy
11273 * the rest of the driver uses. */
11274 if ((IS_HASWELL(dev) || IS_BROADWELL(dev)) &&
11275 (I915_READ(HSW_PWR_WELL_DRIVER) & HSW_PWR_WELL_STATE_ENABLED) == 0)
11278 if (!(I915_READ(vga_reg) & VGA_DISP_DISABLE)) {
11279 DRM_DEBUG_KMS("Something enabled VGA plane, disabling it\n");
11280 i915_disable_vga(dev);
11284 static void intel_modeset_readout_hw_state(struct drm_device *dev)
11286 struct drm_i915_private *dev_priv = dev->dev_private;
11288 struct intel_crtc *crtc;
11289 struct intel_encoder *encoder;
11290 struct intel_connector *connector;
11293 list_for_each_entry(crtc, &dev->mode_config.crtc_list,
11295 memset(&crtc->config, 0, sizeof(crtc->config));
11297 crtc->active = dev_priv->display.get_pipe_config(crtc,
11300 crtc->base.enabled = crtc->active;
11301 crtc->primary_enabled = crtc->active;
11303 DRM_DEBUG_KMS("[CRTC:%d] hw state readout: %s\n",
11304 crtc->base.base.id,
11305 crtc->active ? "enabled" : "disabled");
11308 /* FIXME: Smash this into the new shared dpll infrastructure. */
11310 intel_ddi_setup_hw_pll_state(dev);
11312 for (i = 0; i < dev_priv->num_shared_dpll; i++) {
11313 struct intel_shared_dpll *pll = &dev_priv->shared_dplls[i];
11315 pll->on = pll->get_hw_state(dev_priv, pll, &pll->hw_state);
11317 list_for_each_entry(crtc, &dev->mode_config.crtc_list,
11319 if (crtc->active && intel_crtc_to_shared_dpll(crtc) == pll)
11322 pll->refcount = pll->active;
11324 DRM_DEBUG_KMS("%s hw state readout: refcount %i, on %i\n",
11325 pll->name, pll->refcount, pll->on);
11328 list_for_each_entry(encoder, &dev->mode_config.encoder_list,
11332 if (encoder->get_hw_state(encoder, &pipe)) {
11333 crtc = to_intel_crtc(dev_priv->pipe_to_crtc_mapping[pipe]);
11334 encoder->base.crtc = &crtc->base;
11335 encoder->get_config(encoder, &crtc->config);
11337 encoder->base.crtc = NULL;
11340 encoder->connectors_active = false;
11341 DRM_DEBUG_KMS("[ENCODER:%d:%s] hw state readout: %s, pipe %c\n",
11342 encoder->base.base.id,
11343 drm_get_encoder_name(&encoder->base),
11344 encoder->base.crtc ? "enabled" : "disabled",
11348 list_for_each_entry(connector, &dev->mode_config.connector_list,
11350 if (connector->get_hw_state(connector)) {
11351 connector->base.dpms = DRM_MODE_DPMS_ON;
11352 connector->encoder->connectors_active = true;
11353 connector->base.encoder = &connector->encoder->base;
11355 connector->base.dpms = DRM_MODE_DPMS_OFF;
11356 connector->base.encoder = NULL;
11358 DRM_DEBUG_KMS("[CONNECTOR:%d:%s] hw state readout: %s\n",
11359 connector->base.base.id,
11360 drm_get_connector_name(&connector->base),
11361 connector->base.encoder ? "enabled" : "disabled");
11365 /* Scan out the current hw modeset state, sanitizes it and maps it into the drm
11366 * and i915 state tracking structures. */
11367 void intel_modeset_setup_hw_state(struct drm_device *dev,
11368 bool force_restore)
11370 struct drm_i915_private *dev_priv = dev->dev_private;
11372 struct intel_crtc *crtc;
11373 struct intel_encoder *encoder;
11376 intel_modeset_readout_hw_state(dev);
11379 * Now that we have the config, copy it to each CRTC struct
11380 * Note that this could go away if we move to using crtc_config
11381 * checking everywhere.
11383 list_for_each_entry(crtc, &dev->mode_config.crtc_list,
11385 if (crtc->active && i915.fastboot) {
11386 intel_crtc_mode_from_pipe_config(crtc, &crtc->config);
11388 DRM_DEBUG_KMS("[CRTC:%d] found active mode: ",
11389 crtc->base.base.id);
11390 drm_mode_debug_printmodeline(&crtc->base.mode);
11394 /* HW state is read out, now we need to sanitize this mess. */
11395 list_for_each_entry(encoder, &dev->mode_config.encoder_list,
11397 intel_sanitize_encoder(encoder);
11400 for_each_pipe(pipe) {
11401 crtc = to_intel_crtc(dev_priv->pipe_to_crtc_mapping[pipe]);
11402 intel_sanitize_crtc(crtc);
11403 intel_dump_pipe_config(crtc, &crtc->config, "[setup_hw_state]");
11406 for (i = 0; i < dev_priv->num_shared_dpll; i++) {
11407 struct intel_shared_dpll *pll = &dev_priv->shared_dplls[i];
11409 if (!pll->on || pll->active)
11412 DRM_DEBUG_KMS("%s enabled but not in use, disabling\n", pll->name);
11414 pll->disable(dev_priv, pll);
11418 if (HAS_PCH_SPLIT(dev))
11419 ilk_wm_get_hw_state(dev);
11421 if (force_restore) {
11422 i915_redisable_vga(dev);
11425 * We need to use raw interfaces for restoring state to avoid
11426 * checking (bogus) intermediate states.
11428 for_each_pipe(pipe) {
11429 struct drm_crtc *crtc =
11430 dev_priv->pipe_to_crtc_mapping[pipe];
11432 __intel_set_mode(crtc, &crtc->mode, crtc->x, crtc->y,
11436 intel_modeset_update_staged_output_state(dev);
11439 intel_modeset_check_state(dev);
11442 void intel_modeset_gem_init(struct drm_device *dev)
11444 intel_modeset_init_hw(dev);
11446 intel_setup_overlay(dev);
11448 mutex_lock(&dev->mode_config.mutex);
11449 intel_modeset_setup_hw_state(dev, false);
11450 mutex_unlock(&dev->mode_config.mutex);
11453 void intel_modeset_cleanup(struct drm_device *dev)
11455 struct drm_i915_private *dev_priv = dev->dev_private;
11456 struct drm_crtc *crtc;
11457 struct drm_connector *connector;
11460 * Interrupts and polling as the first thing to avoid creating havoc.
11461 * Too much stuff here (turning of rps, connectors, ...) would
11462 * experience fancy races otherwise.
11464 drm_irq_uninstall(dev);
11465 cancel_work_sync(&dev_priv->hotplug_work);
11467 * Due to the hpd irq storm handling the hotplug work can re-arm the
11468 * poll handlers. Hence disable polling after hpd handling is shut down.
11470 drm_kms_helper_poll_fini(dev);
11472 mutex_lock(&dev->struct_mutex);
11474 intel_unregister_dsm_handler();
11476 list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
11477 /* Skip inactive CRTCs */
11481 intel_increase_pllclock(crtc);
11484 intel_disable_fbc(dev);
11486 intel_disable_gt_powersave(dev);
11488 ironlake_teardown_rc6(dev);
11490 mutex_unlock(&dev->struct_mutex);
11492 /* flush any delayed tasks or pending work */
11493 flush_scheduled_work();
11495 /* destroy the backlight and sysfs files before encoders/connectors */
11496 list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
11497 intel_panel_destroy_backlight(connector);
11498 drm_sysfs_connector_remove(connector);
11501 drm_mode_config_cleanup(dev);
11503 intel_cleanup_overlay(dev);
11507 * Return which encoder is currently attached for connector.
11509 struct drm_encoder *intel_best_encoder(struct drm_connector *connector)
11511 return &intel_attached_encoder(connector)->base;
11514 void intel_connector_attach_encoder(struct intel_connector *connector,
11515 struct intel_encoder *encoder)
11517 connector->encoder = encoder;
11518 drm_mode_connector_attach_encoder(&connector->base,
11523 * set vga decode state - true == enable VGA decode
11525 int intel_modeset_vga_set_state(struct drm_device *dev, bool state)
11527 struct drm_i915_private *dev_priv = dev->dev_private;
11528 unsigned reg = INTEL_INFO(dev)->gen >= 6 ? SNB_GMCH_CTRL : INTEL_GMCH_CTRL;
11531 pci_read_config_word(dev_priv->bridge_dev, reg, &gmch_ctrl);
11533 gmch_ctrl &= ~INTEL_GMCH_VGA_DISABLE;
11535 gmch_ctrl |= INTEL_GMCH_VGA_DISABLE;
11536 pci_write_config_word(dev_priv->bridge_dev, reg, gmch_ctrl);
11540 struct intel_display_error_state {
11542 u32 power_well_driver;
11544 int num_transcoders;
11546 struct intel_cursor_error_state {
11551 } cursor[I915_MAX_PIPES];
11553 struct intel_pipe_error_state {
11554 bool power_domain_on;
11556 } pipe[I915_MAX_PIPES];
11558 struct intel_plane_error_state {
11566 } plane[I915_MAX_PIPES];
11568 struct intel_transcoder_error_state {
11569 bool power_domain_on;
11570 enum transcoder cpu_transcoder;
11583 struct intel_display_error_state *
11584 intel_display_capture_error_state(struct drm_device *dev)
11586 drm_i915_private_t *dev_priv = dev->dev_private;
11587 struct intel_display_error_state *error;
11588 int transcoders[] = {
11596 if (INTEL_INFO(dev)->num_pipes == 0)
11599 error = kzalloc(sizeof(*error), GFP_ATOMIC);
11603 if (IS_HASWELL(dev) || IS_BROADWELL(dev))
11604 error->power_well_driver = I915_READ(HSW_PWR_WELL_DRIVER);
11607 error->pipe[i].power_domain_on =
11608 intel_display_power_enabled_sw(dev, POWER_DOMAIN_PIPE(i));
11609 if (!error->pipe[i].power_domain_on)
11612 if (INTEL_INFO(dev)->gen <= 6 || IS_VALLEYVIEW(dev)) {
11613 error->cursor[i].control = I915_READ(CURCNTR(i));
11614 error->cursor[i].position = I915_READ(CURPOS(i));
11615 error->cursor[i].base = I915_READ(CURBASE(i));
11617 error->cursor[i].control = I915_READ(CURCNTR_IVB(i));
11618 error->cursor[i].position = I915_READ(CURPOS_IVB(i));
11619 error->cursor[i].base = I915_READ(CURBASE_IVB(i));
11622 error->plane[i].control = I915_READ(DSPCNTR(i));
11623 error->plane[i].stride = I915_READ(DSPSTRIDE(i));
11624 if (INTEL_INFO(dev)->gen <= 3) {
11625 error->plane[i].size = I915_READ(DSPSIZE(i));
11626 error->plane[i].pos = I915_READ(DSPPOS(i));
11628 if (INTEL_INFO(dev)->gen <= 7 && !IS_HASWELL(dev))
11629 error->plane[i].addr = I915_READ(DSPADDR(i));
11630 if (INTEL_INFO(dev)->gen >= 4) {
11631 error->plane[i].surface = I915_READ(DSPSURF(i));
11632 error->plane[i].tile_offset = I915_READ(DSPTILEOFF(i));
11635 error->pipe[i].source = I915_READ(PIPESRC(i));
11638 error->num_transcoders = INTEL_INFO(dev)->num_pipes;
11639 if (HAS_DDI(dev_priv->dev))
11640 error->num_transcoders++; /* Account for eDP. */
11642 for (i = 0; i < error->num_transcoders; i++) {
11643 enum transcoder cpu_transcoder = transcoders[i];
11645 error->transcoder[i].power_domain_on =
11646 intel_display_power_enabled_sw(dev,
11647 POWER_DOMAIN_TRANSCODER(cpu_transcoder));
11648 if (!error->transcoder[i].power_domain_on)
11651 error->transcoder[i].cpu_transcoder = cpu_transcoder;
11653 error->transcoder[i].conf = I915_READ(PIPECONF(cpu_transcoder));
11654 error->transcoder[i].htotal = I915_READ(HTOTAL(cpu_transcoder));
11655 error->transcoder[i].hblank = I915_READ(HBLANK(cpu_transcoder));
11656 error->transcoder[i].hsync = I915_READ(HSYNC(cpu_transcoder));
11657 error->transcoder[i].vtotal = I915_READ(VTOTAL(cpu_transcoder));
11658 error->transcoder[i].vblank = I915_READ(VBLANK(cpu_transcoder));
11659 error->transcoder[i].vsync = I915_READ(VSYNC(cpu_transcoder));
11665 #define err_printf(e, ...) i915_error_printf(e, __VA_ARGS__)
11668 intel_display_print_error_state(struct drm_i915_error_state_buf *m,
11669 struct drm_device *dev,
11670 struct intel_display_error_state *error)
11677 err_printf(m, "Num Pipes: %d\n", INTEL_INFO(dev)->num_pipes);
11678 if (IS_HASWELL(dev) || IS_BROADWELL(dev))
11679 err_printf(m, "PWR_WELL_CTL2: %08x\n",
11680 error->power_well_driver);
11682 err_printf(m, "Pipe [%d]:\n", i);
11683 err_printf(m, " Power: %s\n",
11684 error->pipe[i].power_domain_on ? "on" : "off");
11685 err_printf(m, " SRC: %08x\n", error->pipe[i].source);
11687 err_printf(m, "Plane [%d]:\n", i);
11688 err_printf(m, " CNTR: %08x\n", error->plane[i].control);
11689 err_printf(m, " STRIDE: %08x\n", error->plane[i].stride);
11690 if (INTEL_INFO(dev)->gen <= 3) {
11691 err_printf(m, " SIZE: %08x\n", error->plane[i].size);
11692 err_printf(m, " POS: %08x\n", error->plane[i].pos);
11694 if (INTEL_INFO(dev)->gen <= 7 && !IS_HASWELL(dev))
11695 err_printf(m, " ADDR: %08x\n", error->plane[i].addr);
11696 if (INTEL_INFO(dev)->gen >= 4) {
11697 err_printf(m, " SURF: %08x\n", error->plane[i].surface);
11698 err_printf(m, " TILEOFF: %08x\n", error->plane[i].tile_offset);
11701 err_printf(m, "Cursor [%d]:\n", i);
11702 err_printf(m, " CNTR: %08x\n", error->cursor[i].control);
11703 err_printf(m, " POS: %08x\n", error->cursor[i].position);
11704 err_printf(m, " BASE: %08x\n", error->cursor[i].base);
11707 for (i = 0; i < error->num_transcoders; i++) {
11708 err_printf(m, "CPU transcoder: %c\n",
11709 transcoder_name(error->transcoder[i].cpu_transcoder));
11710 err_printf(m, " Power: %s\n",
11711 error->transcoder[i].power_domain_on ? "on" : "off");
11712 err_printf(m, " CONF: %08x\n", error->transcoder[i].conf);
11713 err_printf(m, " HTOTAL: %08x\n", error->transcoder[i].htotal);
11714 err_printf(m, " HBLANK: %08x\n", error->transcoder[i].hblank);
11715 err_printf(m, " HSYNC: %08x\n", error->transcoder[i].hsync);
11716 err_printf(m, " VTOTAL: %08x\n", error->transcoder[i].vtotal);
11717 err_printf(m, " VBLANK: %08x\n", error->transcoder[i].vblank);
11718 err_printf(m, " VSYNC: %08x\n", error->transcoder[i].vsync);