2 * Copyright © 2006-2007 Intel Corporation
4 * Permission is hereby granted, free of charge, to any person obtaining a
5 * copy of this software and associated documentation files (the "Software"),
6 * to deal in the Software without restriction, including without limitation
7 * the rights to use, copy, modify, merge, publish, distribute, sublicense,
8 * and/or sell copies of the Software, and to permit persons to whom the
9 * Software is furnished to do so, subject to the following conditions:
11 * The above copyright notice and this permission notice (including the next
12 * paragraph) shall be included in all copies or substantial portions of the
15 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
16 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
17 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
18 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
19 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
20 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
21 * DEALINGS IN THE SOFTWARE.
24 * Eric Anholt <eric@anholt.net>
27 #include <linux/dmi.h>
28 #include <linux/module.h>
29 #include <linux/input.h>
30 #include <linux/i2c.h>
31 #include <linux/kernel.h>
32 #include <linux/slab.h>
33 #include <linux/vgaarb.h>
34 #include <drm/drm_edid.h>
36 #include "intel_drv.h"
37 #include <drm/i915_drm.h>
39 #include "i915_trace.h"
40 #include <drm/drm_dp_helper.h>
41 #include <drm/drm_crtc_helper.h>
42 #include <linux/dma_remapping.h>
44 static void intel_increase_pllclock(struct drm_crtc *crtc);
45 static void intel_crtc_update_cursor(struct drm_crtc *crtc, bool on);
47 static void i9xx_crtc_clock_get(struct intel_crtc *crtc,
48 struct intel_crtc_config *pipe_config);
49 static void ironlake_pch_clock_get(struct intel_crtc *crtc,
50 struct intel_crtc_config *pipe_config);
52 static int intel_set_mode(struct drm_crtc *crtc, struct drm_display_mode *mode,
53 int x, int y, struct drm_framebuffer *old_fb);
54 static int intel_framebuffer_init(struct drm_device *dev,
55 struct intel_framebuffer *ifb,
56 struct drm_mode_fb_cmd2 *mode_cmd,
57 struct drm_i915_gem_object *obj);
68 typedef struct intel_limit intel_limit_t;
70 intel_range_t dot, vco, n, m, m1, m2, p, p1;
75 intel_pch_rawclk(struct drm_device *dev)
77 struct drm_i915_private *dev_priv = dev->dev_private;
79 WARN_ON(!HAS_PCH_SPLIT(dev));
81 return I915_READ(PCH_RAWCLK_FREQ) & RAWCLK_FREQ_MASK;
84 static inline u32 /* units of 100MHz */
85 intel_fdi_link_freq(struct drm_device *dev)
88 struct drm_i915_private *dev_priv = dev->dev_private;
89 return (I915_READ(FDI_PLL_BIOS_0) & FDI_PLL_FB_CLOCK_MASK) + 2;
94 static const intel_limit_t intel_limits_i8xx_dac = {
95 .dot = { .min = 25000, .max = 350000 },
96 .vco = { .min = 908000, .max = 1512000 },
97 .n = { .min = 2, .max = 16 },
98 .m = { .min = 96, .max = 140 },
99 .m1 = { .min = 18, .max = 26 },
100 .m2 = { .min = 6, .max = 16 },
101 .p = { .min = 4, .max = 128 },
102 .p1 = { .min = 2, .max = 33 },
103 .p2 = { .dot_limit = 165000,
104 .p2_slow = 4, .p2_fast = 2 },
107 static const intel_limit_t intel_limits_i8xx_dvo = {
108 .dot = { .min = 25000, .max = 350000 },
109 .vco = { .min = 908000, .max = 1512000 },
110 .n = { .min = 2, .max = 16 },
111 .m = { .min = 96, .max = 140 },
112 .m1 = { .min = 18, .max = 26 },
113 .m2 = { .min = 6, .max = 16 },
114 .p = { .min = 4, .max = 128 },
115 .p1 = { .min = 2, .max = 33 },
116 .p2 = { .dot_limit = 165000,
117 .p2_slow = 4, .p2_fast = 4 },
120 static const intel_limit_t intel_limits_i8xx_lvds = {
121 .dot = { .min = 25000, .max = 350000 },
122 .vco = { .min = 908000, .max = 1512000 },
123 .n = { .min = 2, .max = 16 },
124 .m = { .min = 96, .max = 140 },
125 .m1 = { .min = 18, .max = 26 },
126 .m2 = { .min = 6, .max = 16 },
127 .p = { .min = 4, .max = 128 },
128 .p1 = { .min = 1, .max = 6 },
129 .p2 = { .dot_limit = 165000,
130 .p2_slow = 14, .p2_fast = 7 },
133 static const intel_limit_t intel_limits_i9xx_sdvo = {
134 .dot = { .min = 20000, .max = 400000 },
135 .vco = { .min = 1400000, .max = 2800000 },
136 .n = { .min = 1, .max = 6 },
137 .m = { .min = 70, .max = 120 },
138 .m1 = { .min = 8, .max = 18 },
139 .m2 = { .min = 3, .max = 7 },
140 .p = { .min = 5, .max = 80 },
141 .p1 = { .min = 1, .max = 8 },
142 .p2 = { .dot_limit = 200000,
143 .p2_slow = 10, .p2_fast = 5 },
146 static const intel_limit_t intel_limits_i9xx_lvds = {
147 .dot = { .min = 20000, .max = 400000 },
148 .vco = { .min = 1400000, .max = 2800000 },
149 .n = { .min = 1, .max = 6 },
150 .m = { .min = 70, .max = 120 },
151 .m1 = { .min = 8, .max = 18 },
152 .m2 = { .min = 3, .max = 7 },
153 .p = { .min = 7, .max = 98 },
154 .p1 = { .min = 1, .max = 8 },
155 .p2 = { .dot_limit = 112000,
156 .p2_slow = 14, .p2_fast = 7 },
160 static const intel_limit_t intel_limits_g4x_sdvo = {
161 .dot = { .min = 25000, .max = 270000 },
162 .vco = { .min = 1750000, .max = 3500000},
163 .n = { .min = 1, .max = 4 },
164 .m = { .min = 104, .max = 138 },
165 .m1 = { .min = 17, .max = 23 },
166 .m2 = { .min = 5, .max = 11 },
167 .p = { .min = 10, .max = 30 },
168 .p1 = { .min = 1, .max = 3},
169 .p2 = { .dot_limit = 270000,
175 static const intel_limit_t intel_limits_g4x_hdmi = {
176 .dot = { .min = 22000, .max = 400000 },
177 .vco = { .min = 1750000, .max = 3500000},
178 .n = { .min = 1, .max = 4 },
179 .m = { .min = 104, .max = 138 },
180 .m1 = { .min = 16, .max = 23 },
181 .m2 = { .min = 5, .max = 11 },
182 .p = { .min = 5, .max = 80 },
183 .p1 = { .min = 1, .max = 8},
184 .p2 = { .dot_limit = 165000,
185 .p2_slow = 10, .p2_fast = 5 },
188 static const intel_limit_t intel_limits_g4x_single_channel_lvds = {
189 .dot = { .min = 20000, .max = 115000 },
190 .vco = { .min = 1750000, .max = 3500000 },
191 .n = { .min = 1, .max = 3 },
192 .m = { .min = 104, .max = 138 },
193 .m1 = { .min = 17, .max = 23 },
194 .m2 = { .min = 5, .max = 11 },
195 .p = { .min = 28, .max = 112 },
196 .p1 = { .min = 2, .max = 8 },
197 .p2 = { .dot_limit = 0,
198 .p2_slow = 14, .p2_fast = 14
202 static const intel_limit_t intel_limits_g4x_dual_channel_lvds = {
203 .dot = { .min = 80000, .max = 224000 },
204 .vco = { .min = 1750000, .max = 3500000 },
205 .n = { .min = 1, .max = 3 },
206 .m = { .min = 104, .max = 138 },
207 .m1 = { .min = 17, .max = 23 },
208 .m2 = { .min = 5, .max = 11 },
209 .p = { .min = 14, .max = 42 },
210 .p1 = { .min = 2, .max = 6 },
211 .p2 = { .dot_limit = 0,
212 .p2_slow = 7, .p2_fast = 7
216 static const intel_limit_t intel_limits_pineview_sdvo = {
217 .dot = { .min = 20000, .max = 400000},
218 .vco = { .min = 1700000, .max = 3500000 },
219 /* Pineview's Ncounter is a ring counter */
220 .n = { .min = 3, .max = 6 },
221 .m = { .min = 2, .max = 256 },
222 /* Pineview only has one combined m divider, which we treat as m2. */
223 .m1 = { .min = 0, .max = 0 },
224 .m2 = { .min = 0, .max = 254 },
225 .p = { .min = 5, .max = 80 },
226 .p1 = { .min = 1, .max = 8 },
227 .p2 = { .dot_limit = 200000,
228 .p2_slow = 10, .p2_fast = 5 },
231 static const intel_limit_t intel_limits_pineview_lvds = {
232 .dot = { .min = 20000, .max = 400000 },
233 .vco = { .min = 1700000, .max = 3500000 },
234 .n = { .min = 3, .max = 6 },
235 .m = { .min = 2, .max = 256 },
236 .m1 = { .min = 0, .max = 0 },
237 .m2 = { .min = 0, .max = 254 },
238 .p = { .min = 7, .max = 112 },
239 .p1 = { .min = 1, .max = 8 },
240 .p2 = { .dot_limit = 112000,
241 .p2_slow = 14, .p2_fast = 14 },
244 /* Ironlake / Sandybridge
246 * We calculate clock using (register_value + 2) for N/M1/M2, so here
247 * the range value for them is (actual_value - 2).
249 static const intel_limit_t intel_limits_ironlake_dac = {
250 .dot = { .min = 25000, .max = 350000 },
251 .vco = { .min = 1760000, .max = 3510000 },
252 .n = { .min = 1, .max = 5 },
253 .m = { .min = 79, .max = 127 },
254 .m1 = { .min = 12, .max = 22 },
255 .m2 = { .min = 5, .max = 9 },
256 .p = { .min = 5, .max = 80 },
257 .p1 = { .min = 1, .max = 8 },
258 .p2 = { .dot_limit = 225000,
259 .p2_slow = 10, .p2_fast = 5 },
262 static const intel_limit_t intel_limits_ironlake_single_lvds = {
263 .dot = { .min = 25000, .max = 350000 },
264 .vco = { .min = 1760000, .max = 3510000 },
265 .n = { .min = 1, .max = 3 },
266 .m = { .min = 79, .max = 118 },
267 .m1 = { .min = 12, .max = 22 },
268 .m2 = { .min = 5, .max = 9 },
269 .p = { .min = 28, .max = 112 },
270 .p1 = { .min = 2, .max = 8 },
271 .p2 = { .dot_limit = 225000,
272 .p2_slow = 14, .p2_fast = 14 },
275 static const intel_limit_t intel_limits_ironlake_dual_lvds = {
276 .dot = { .min = 25000, .max = 350000 },
277 .vco = { .min = 1760000, .max = 3510000 },
278 .n = { .min = 1, .max = 3 },
279 .m = { .min = 79, .max = 127 },
280 .m1 = { .min = 12, .max = 22 },
281 .m2 = { .min = 5, .max = 9 },
282 .p = { .min = 14, .max = 56 },
283 .p1 = { .min = 2, .max = 8 },
284 .p2 = { .dot_limit = 225000,
285 .p2_slow = 7, .p2_fast = 7 },
288 /* LVDS 100mhz refclk limits. */
289 static const intel_limit_t intel_limits_ironlake_single_lvds_100m = {
290 .dot = { .min = 25000, .max = 350000 },
291 .vco = { .min = 1760000, .max = 3510000 },
292 .n = { .min = 1, .max = 2 },
293 .m = { .min = 79, .max = 126 },
294 .m1 = { .min = 12, .max = 22 },
295 .m2 = { .min = 5, .max = 9 },
296 .p = { .min = 28, .max = 112 },
297 .p1 = { .min = 2, .max = 8 },
298 .p2 = { .dot_limit = 225000,
299 .p2_slow = 14, .p2_fast = 14 },
302 static const intel_limit_t intel_limits_ironlake_dual_lvds_100m = {
303 .dot = { .min = 25000, .max = 350000 },
304 .vco = { .min = 1760000, .max = 3510000 },
305 .n = { .min = 1, .max = 3 },
306 .m = { .min = 79, .max = 126 },
307 .m1 = { .min = 12, .max = 22 },
308 .m2 = { .min = 5, .max = 9 },
309 .p = { .min = 14, .max = 42 },
310 .p1 = { .min = 2, .max = 6 },
311 .p2 = { .dot_limit = 225000,
312 .p2_slow = 7, .p2_fast = 7 },
315 static const intel_limit_t intel_limits_vlv = {
317 * These are the data rate limits (measured in fast clocks)
318 * since those are the strictest limits we have. The fast
319 * clock and actual rate limits are more relaxed, so checking
320 * them would make no difference.
322 .dot = { .min = 25000 * 5, .max = 270000 * 5 },
323 .vco = { .min = 4000000, .max = 6000000 },
324 .n = { .min = 1, .max = 7 },
325 .m1 = { .min = 2, .max = 3 },
326 .m2 = { .min = 11, .max = 156 },
327 .p1 = { .min = 2, .max = 3 },
328 .p2 = { .p2_slow = 2, .p2_fast = 20 }, /* slow=min, fast=max */
331 static void vlv_clock(int refclk, intel_clock_t *clock)
333 clock->m = clock->m1 * clock->m2;
334 clock->p = clock->p1 * clock->p2;
335 if (WARN_ON(clock->n == 0 || clock->p == 0))
337 clock->vco = DIV_ROUND_CLOSEST(refclk * clock->m, clock->n);
338 clock->dot = DIV_ROUND_CLOSEST(clock->vco, clock->p);
342 * Returns whether any output on the specified pipe is of the specified type
344 static bool intel_pipe_has_type(struct drm_crtc *crtc, int type)
346 struct drm_device *dev = crtc->dev;
347 struct intel_encoder *encoder;
349 for_each_encoder_on_crtc(dev, crtc, encoder)
350 if (encoder->type == type)
356 static const intel_limit_t *intel_ironlake_limit(struct drm_crtc *crtc,
359 struct drm_device *dev = crtc->dev;
360 const intel_limit_t *limit;
362 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
363 if (intel_is_dual_link_lvds(dev)) {
364 if (refclk == 100000)
365 limit = &intel_limits_ironlake_dual_lvds_100m;
367 limit = &intel_limits_ironlake_dual_lvds;
369 if (refclk == 100000)
370 limit = &intel_limits_ironlake_single_lvds_100m;
372 limit = &intel_limits_ironlake_single_lvds;
375 limit = &intel_limits_ironlake_dac;
380 static const intel_limit_t *intel_g4x_limit(struct drm_crtc *crtc)
382 struct drm_device *dev = crtc->dev;
383 const intel_limit_t *limit;
385 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
386 if (intel_is_dual_link_lvds(dev))
387 limit = &intel_limits_g4x_dual_channel_lvds;
389 limit = &intel_limits_g4x_single_channel_lvds;
390 } else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_HDMI) ||
391 intel_pipe_has_type(crtc, INTEL_OUTPUT_ANALOG)) {
392 limit = &intel_limits_g4x_hdmi;
393 } else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_SDVO)) {
394 limit = &intel_limits_g4x_sdvo;
395 } else /* The option is for other outputs */
396 limit = &intel_limits_i9xx_sdvo;
401 static const intel_limit_t *intel_limit(struct drm_crtc *crtc, int refclk)
403 struct drm_device *dev = crtc->dev;
404 const intel_limit_t *limit;
406 if (HAS_PCH_SPLIT(dev))
407 limit = intel_ironlake_limit(crtc, refclk);
408 else if (IS_G4X(dev)) {
409 limit = intel_g4x_limit(crtc);
410 } else if (IS_PINEVIEW(dev)) {
411 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS))
412 limit = &intel_limits_pineview_lvds;
414 limit = &intel_limits_pineview_sdvo;
415 } else if (IS_VALLEYVIEW(dev)) {
416 limit = &intel_limits_vlv;
417 } else if (!IS_GEN2(dev)) {
418 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS))
419 limit = &intel_limits_i9xx_lvds;
421 limit = &intel_limits_i9xx_sdvo;
423 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS))
424 limit = &intel_limits_i8xx_lvds;
425 else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DVO))
426 limit = &intel_limits_i8xx_dvo;
428 limit = &intel_limits_i8xx_dac;
433 /* m1 is reserved as 0 in Pineview, n is a ring counter */
434 static void pineview_clock(int refclk, intel_clock_t *clock)
436 clock->m = clock->m2 + 2;
437 clock->p = clock->p1 * clock->p2;
438 if (WARN_ON(clock->n == 0 || clock->p == 0))
440 clock->vco = DIV_ROUND_CLOSEST(refclk * clock->m, clock->n);
441 clock->dot = DIV_ROUND_CLOSEST(clock->vco, clock->p);
444 static uint32_t i9xx_dpll_compute_m(struct dpll *dpll)
446 return 5 * (dpll->m1 + 2) + (dpll->m2 + 2);
449 static void i9xx_clock(int refclk, intel_clock_t *clock)
451 clock->m = i9xx_dpll_compute_m(clock);
452 clock->p = clock->p1 * clock->p2;
453 if (WARN_ON(clock->n + 2 == 0 || clock->p == 0))
455 clock->vco = DIV_ROUND_CLOSEST(refclk * clock->m, clock->n + 2);
456 clock->dot = DIV_ROUND_CLOSEST(clock->vco, clock->p);
459 #define INTELPllInvalid(s) do { /* DRM_DEBUG(s); */ return false; } while (0)
461 * Returns whether the given set of divisors are valid for a given refclk with
462 * the given connectors.
465 static bool intel_PLL_is_valid(struct drm_device *dev,
466 const intel_limit_t *limit,
467 const intel_clock_t *clock)
469 if (clock->n < limit->n.min || limit->n.max < clock->n)
470 INTELPllInvalid("n out of range\n");
471 if (clock->p1 < limit->p1.min || limit->p1.max < clock->p1)
472 INTELPllInvalid("p1 out of range\n");
473 if (clock->m2 < limit->m2.min || limit->m2.max < clock->m2)
474 INTELPllInvalid("m2 out of range\n");
475 if (clock->m1 < limit->m1.min || limit->m1.max < clock->m1)
476 INTELPllInvalid("m1 out of range\n");
478 if (!IS_PINEVIEW(dev) && !IS_VALLEYVIEW(dev))
479 if (clock->m1 <= clock->m2)
480 INTELPllInvalid("m1 <= m2\n");
482 if (!IS_VALLEYVIEW(dev)) {
483 if (clock->p < limit->p.min || limit->p.max < clock->p)
484 INTELPllInvalid("p out of range\n");
485 if (clock->m < limit->m.min || limit->m.max < clock->m)
486 INTELPllInvalid("m out of range\n");
489 if (clock->vco < limit->vco.min || limit->vco.max < clock->vco)
490 INTELPllInvalid("vco out of range\n");
491 /* XXX: We may need to be checking "Dot clock" depending on the multiplier,
492 * connector, etc., rather than just a single range.
494 if (clock->dot < limit->dot.min || limit->dot.max < clock->dot)
495 INTELPllInvalid("dot out of range\n");
501 i9xx_find_best_dpll(const intel_limit_t *limit, struct drm_crtc *crtc,
502 int target, int refclk, intel_clock_t *match_clock,
503 intel_clock_t *best_clock)
505 struct drm_device *dev = crtc->dev;
509 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
511 * For LVDS just rely on its current settings for dual-channel.
512 * We haven't figured out how to reliably set up different
513 * single/dual channel state, if we even can.
515 if (intel_is_dual_link_lvds(dev))
516 clock.p2 = limit->p2.p2_fast;
518 clock.p2 = limit->p2.p2_slow;
520 if (target < limit->p2.dot_limit)
521 clock.p2 = limit->p2.p2_slow;
523 clock.p2 = limit->p2.p2_fast;
526 memset(best_clock, 0, sizeof(*best_clock));
528 for (clock.m1 = limit->m1.min; clock.m1 <= limit->m1.max;
530 for (clock.m2 = limit->m2.min;
531 clock.m2 <= limit->m2.max; clock.m2++) {
532 if (clock.m2 >= clock.m1)
534 for (clock.n = limit->n.min;
535 clock.n <= limit->n.max; clock.n++) {
536 for (clock.p1 = limit->p1.min;
537 clock.p1 <= limit->p1.max; clock.p1++) {
540 i9xx_clock(refclk, &clock);
541 if (!intel_PLL_is_valid(dev, limit,
545 clock.p != match_clock->p)
548 this_err = abs(clock.dot - target);
549 if (this_err < err) {
558 return (err != target);
562 pnv_find_best_dpll(const intel_limit_t *limit, struct drm_crtc *crtc,
563 int target, int refclk, intel_clock_t *match_clock,
564 intel_clock_t *best_clock)
566 struct drm_device *dev = crtc->dev;
570 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
572 * For LVDS just rely on its current settings for dual-channel.
573 * We haven't figured out how to reliably set up different
574 * single/dual channel state, if we even can.
576 if (intel_is_dual_link_lvds(dev))
577 clock.p2 = limit->p2.p2_fast;
579 clock.p2 = limit->p2.p2_slow;
581 if (target < limit->p2.dot_limit)
582 clock.p2 = limit->p2.p2_slow;
584 clock.p2 = limit->p2.p2_fast;
587 memset(best_clock, 0, sizeof(*best_clock));
589 for (clock.m1 = limit->m1.min; clock.m1 <= limit->m1.max;
591 for (clock.m2 = limit->m2.min;
592 clock.m2 <= limit->m2.max; clock.m2++) {
593 for (clock.n = limit->n.min;
594 clock.n <= limit->n.max; clock.n++) {
595 for (clock.p1 = limit->p1.min;
596 clock.p1 <= limit->p1.max; clock.p1++) {
599 pineview_clock(refclk, &clock);
600 if (!intel_PLL_is_valid(dev, limit,
604 clock.p != match_clock->p)
607 this_err = abs(clock.dot - target);
608 if (this_err < err) {
617 return (err != target);
621 g4x_find_best_dpll(const intel_limit_t *limit, struct drm_crtc *crtc,
622 int target, int refclk, intel_clock_t *match_clock,
623 intel_clock_t *best_clock)
625 struct drm_device *dev = crtc->dev;
629 /* approximately equals target * 0.00585 */
630 int err_most = (target >> 8) + (target >> 9);
633 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
634 if (intel_is_dual_link_lvds(dev))
635 clock.p2 = limit->p2.p2_fast;
637 clock.p2 = limit->p2.p2_slow;
639 if (target < limit->p2.dot_limit)
640 clock.p2 = limit->p2.p2_slow;
642 clock.p2 = limit->p2.p2_fast;
645 memset(best_clock, 0, sizeof(*best_clock));
646 max_n = limit->n.max;
647 /* based on hardware requirement, prefer smaller n to precision */
648 for (clock.n = limit->n.min; clock.n <= max_n; clock.n++) {
649 /* based on hardware requirement, prefere larger m1,m2 */
650 for (clock.m1 = limit->m1.max;
651 clock.m1 >= limit->m1.min; clock.m1--) {
652 for (clock.m2 = limit->m2.max;
653 clock.m2 >= limit->m2.min; clock.m2--) {
654 for (clock.p1 = limit->p1.max;
655 clock.p1 >= limit->p1.min; clock.p1--) {
658 i9xx_clock(refclk, &clock);
659 if (!intel_PLL_is_valid(dev, limit,
663 this_err = abs(clock.dot - target);
664 if (this_err < err_most) {
678 vlv_find_best_dpll(const intel_limit_t *limit, struct drm_crtc *crtc,
679 int target, int refclk, intel_clock_t *match_clock,
680 intel_clock_t *best_clock)
682 struct drm_device *dev = crtc->dev;
684 unsigned int bestppm = 1000000;
685 /* min update 19.2 MHz */
686 int max_n = min(limit->n.max, refclk / 19200);
689 target *= 5; /* fast clock */
691 memset(best_clock, 0, sizeof(*best_clock));
693 /* based on hardware requirement, prefer smaller n to precision */
694 for (clock.n = limit->n.min; clock.n <= max_n; clock.n++) {
695 for (clock.p1 = limit->p1.max; clock.p1 >= limit->p1.min; clock.p1--) {
696 for (clock.p2 = limit->p2.p2_fast; clock.p2 >= limit->p2.p2_slow;
697 clock.p2 -= clock.p2 > 10 ? 2 : 1) {
698 clock.p = clock.p1 * clock.p2;
699 /* based on hardware requirement, prefer bigger m1,m2 values */
700 for (clock.m1 = limit->m1.min; clock.m1 <= limit->m1.max; clock.m1++) {
701 unsigned int ppm, diff;
703 clock.m2 = DIV_ROUND_CLOSEST(target * clock.p * clock.n,
706 vlv_clock(refclk, &clock);
708 if (!intel_PLL_is_valid(dev, limit,
712 diff = abs(clock.dot - target);
713 ppm = div_u64(1000000ULL * diff, target);
715 if (ppm < 100 && clock.p > best_clock->p) {
721 if (bestppm >= 10 && ppm < bestppm - 10) {
734 bool intel_crtc_active(struct drm_crtc *crtc)
736 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
738 /* Be paranoid as we can arrive here with only partial
739 * state retrieved from the hardware during setup.
741 * We can ditch the adjusted_mode.crtc_clock check as soon
742 * as Haswell has gained clock readout/fastboot support.
744 * We can ditch the crtc->primary->fb check as soon as we can
745 * properly reconstruct framebuffers.
747 return intel_crtc->active && crtc->primary->fb &&
748 intel_crtc->config.adjusted_mode.crtc_clock;
751 enum transcoder intel_pipe_to_cpu_transcoder(struct drm_i915_private *dev_priv,
754 struct drm_crtc *crtc = dev_priv->pipe_to_crtc_mapping[pipe];
755 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
757 return intel_crtc->config.cpu_transcoder;
760 static void g4x_wait_for_vblank(struct drm_device *dev, int pipe)
762 struct drm_i915_private *dev_priv = dev->dev_private;
763 u32 frame, frame_reg = PIPE_FRMCOUNT_GM45(pipe);
765 frame = I915_READ(frame_reg);
767 if (wait_for(I915_READ_NOTRACE(frame_reg) != frame, 50))
768 DRM_DEBUG_KMS("vblank wait timed out\n");
772 * intel_wait_for_vblank - wait for vblank on a given pipe
774 * @pipe: pipe to wait for
776 * Wait for vblank to occur on a given pipe. Needed for various bits of
779 void intel_wait_for_vblank(struct drm_device *dev, int pipe)
781 struct drm_i915_private *dev_priv = dev->dev_private;
782 int pipestat_reg = PIPESTAT(pipe);
784 if (IS_G4X(dev) || INTEL_INFO(dev)->gen >= 5) {
785 g4x_wait_for_vblank(dev, pipe);
789 /* Clear existing vblank status. Note this will clear any other
790 * sticky status fields as well.
792 * This races with i915_driver_irq_handler() with the result
793 * that either function could miss a vblank event. Here it is not
794 * fatal, as we will either wait upon the next vblank interrupt or
795 * timeout. Generally speaking intel_wait_for_vblank() is only
796 * called during modeset at which time the GPU should be idle and
797 * should *not* be performing page flips and thus not waiting on
799 * Currently, the result of us stealing a vblank from the irq
800 * handler is that a single frame will be skipped during swapbuffers.
802 I915_WRITE(pipestat_reg,
803 I915_READ(pipestat_reg) | PIPE_VBLANK_INTERRUPT_STATUS);
805 /* Wait for vblank interrupt bit to set */
806 if (wait_for(I915_READ(pipestat_reg) &
807 PIPE_VBLANK_INTERRUPT_STATUS,
809 DRM_DEBUG_KMS("vblank wait timed out\n");
812 static bool pipe_dsl_stopped(struct drm_device *dev, enum pipe pipe)
814 struct drm_i915_private *dev_priv = dev->dev_private;
815 u32 reg = PIPEDSL(pipe);
820 line_mask = DSL_LINEMASK_GEN2;
822 line_mask = DSL_LINEMASK_GEN3;
824 line1 = I915_READ(reg) & line_mask;
826 line2 = I915_READ(reg) & line_mask;
828 return line1 == line2;
832 * intel_wait_for_pipe_off - wait for pipe to turn off
834 * @pipe: pipe to wait for
836 * After disabling a pipe, we can't wait for vblank in the usual way,
837 * spinning on the vblank interrupt status bit, since we won't actually
838 * see an interrupt when the pipe is disabled.
841 * wait for the pipe register state bit to turn off
844 * wait for the display line value to settle (it usually
845 * ends up stopping at the start of the next frame).
848 void intel_wait_for_pipe_off(struct drm_device *dev, int pipe)
850 struct drm_i915_private *dev_priv = dev->dev_private;
851 enum transcoder cpu_transcoder = intel_pipe_to_cpu_transcoder(dev_priv,
854 if (INTEL_INFO(dev)->gen >= 4) {
855 int reg = PIPECONF(cpu_transcoder);
857 /* Wait for the Pipe State to go off */
858 if (wait_for((I915_READ(reg) & I965_PIPECONF_ACTIVE) == 0,
860 WARN(1, "pipe_off wait timed out\n");
862 /* Wait for the display line to settle */
863 if (wait_for(pipe_dsl_stopped(dev, pipe), 100))
864 WARN(1, "pipe_off wait timed out\n");
869 * ibx_digital_port_connected - is the specified port connected?
870 * @dev_priv: i915 private structure
871 * @port: the port to test
873 * Returns true if @port is connected, false otherwise.
875 bool ibx_digital_port_connected(struct drm_i915_private *dev_priv,
876 struct intel_digital_port *port)
880 if (HAS_PCH_IBX(dev_priv->dev)) {
883 bit = SDE_PORTB_HOTPLUG;
886 bit = SDE_PORTC_HOTPLUG;
889 bit = SDE_PORTD_HOTPLUG;
897 bit = SDE_PORTB_HOTPLUG_CPT;
900 bit = SDE_PORTC_HOTPLUG_CPT;
903 bit = SDE_PORTD_HOTPLUG_CPT;
910 return I915_READ(SDEISR) & bit;
913 static const char *state_string(bool enabled)
915 return enabled ? "on" : "off";
918 /* Only for pre-ILK configs */
919 void assert_pll(struct drm_i915_private *dev_priv,
920 enum pipe pipe, bool state)
927 val = I915_READ(reg);
928 cur_state = !!(val & DPLL_VCO_ENABLE);
929 WARN(cur_state != state,
930 "PLL state assertion failure (expected %s, current %s)\n",
931 state_string(state), state_string(cur_state));
934 /* XXX: the dsi pll is shared between MIPI DSI ports */
935 static void assert_dsi_pll(struct drm_i915_private *dev_priv, bool state)
940 mutex_lock(&dev_priv->dpio_lock);
941 val = vlv_cck_read(dev_priv, CCK_REG_DSI_PLL_CONTROL);
942 mutex_unlock(&dev_priv->dpio_lock);
944 cur_state = val & DSI_PLL_VCO_EN;
945 WARN(cur_state != state,
946 "DSI PLL state assertion failure (expected %s, current %s)\n",
947 state_string(state), state_string(cur_state));
949 #define assert_dsi_pll_enabled(d) assert_dsi_pll(d, true)
950 #define assert_dsi_pll_disabled(d) assert_dsi_pll(d, false)
952 struct intel_shared_dpll *
953 intel_crtc_to_shared_dpll(struct intel_crtc *crtc)
955 struct drm_i915_private *dev_priv = crtc->base.dev->dev_private;
957 if (crtc->config.shared_dpll < 0)
960 return &dev_priv->shared_dplls[crtc->config.shared_dpll];
964 void assert_shared_dpll(struct drm_i915_private *dev_priv,
965 struct intel_shared_dpll *pll,
969 struct intel_dpll_hw_state hw_state;
971 if (HAS_PCH_LPT(dev_priv->dev)) {
972 DRM_DEBUG_DRIVER("LPT detected: skipping PCH PLL test\n");
977 "asserting DPLL %s with no DPLL\n", state_string(state)))
980 cur_state = pll->get_hw_state(dev_priv, pll, &hw_state);
981 WARN(cur_state != state,
982 "%s assertion failure (expected %s, current %s)\n",
983 pll->name, state_string(state), state_string(cur_state));
986 static void assert_fdi_tx(struct drm_i915_private *dev_priv,
987 enum pipe pipe, bool state)
992 enum transcoder cpu_transcoder = intel_pipe_to_cpu_transcoder(dev_priv,
995 if (HAS_DDI(dev_priv->dev)) {
996 /* DDI does not have a specific FDI_TX register */
997 reg = TRANS_DDI_FUNC_CTL(cpu_transcoder);
998 val = I915_READ(reg);
999 cur_state = !!(val & TRANS_DDI_FUNC_ENABLE);
1001 reg = FDI_TX_CTL(pipe);
1002 val = I915_READ(reg);
1003 cur_state = !!(val & FDI_TX_ENABLE);
1005 WARN(cur_state != state,
1006 "FDI TX state assertion failure (expected %s, current %s)\n",
1007 state_string(state), state_string(cur_state));
1009 #define assert_fdi_tx_enabled(d, p) assert_fdi_tx(d, p, true)
1010 #define assert_fdi_tx_disabled(d, p) assert_fdi_tx(d, p, false)
1012 static void assert_fdi_rx(struct drm_i915_private *dev_priv,
1013 enum pipe pipe, bool state)
1019 reg = FDI_RX_CTL(pipe);
1020 val = I915_READ(reg);
1021 cur_state = !!(val & FDI_RX_ENABLE);
1022 WARN(cur_state != state,
1023 "FDI RX state assertion failure (expected %s, current %s)\n",
1024 state_string(state), state_string(cur_state));
1026 #define assert_fdi_rx_enabled(d, p) assert_fdi_rx(d, p, true)
1027 #define assert_fdi_rx_disabled(d, p) assert_fdi_rx(d, p, false)
1029 static void assert_fdi_tx_pll_enabled(struct drm_i915_private *dev_priv,
1035 /* ILK FDI PLL is always enabled */
1036 if (INTEL_INFO(dev_priv->dev)->gen == 5)
1039 /* On Haswell, DDI ports are responsible for the FDI PLL setup */
1040 if (HAS_DDI(dev_priv->dev))
1043 reg = FDI_TX_CTL(pipe);
1044 val = I915_READ(reg);
1045 WARN(!(val & FDI_TX_PLL_ENABLE), "FDI TX PLL assertion failure, should be active but is disabled\n");
1048 void assert_fdi_rx_pll(struct drm_i915_private *dev_priv,
1049 enum pipe pipe, bool state)
1055 reg = FDI_RX_CTL(pipe);
1056 val = I915_READ(reg);
1057 cur_state = !!(val & FDI_RX_PLL_ENABLE);
1058 WARN(cur_state != state,
1059 "FDI RX PLL assertion failure (expected %s, current %s)\n",
1060 state_string(state), state_string(cur_state));
1063 static void assert_panel_unlocked(struct drm_i915_private *dev_priv,
1066 int pp_reg, lvds_reg;
1068 enum pipe panel_pipe = PIPE_A;
1071 if (HAS_PCH_SPLIT(dev_priv->dev)) {
1072 pp_reg = PCH_PP_CONTROL;
1073 lvds_reg = PCH_LVDS;
1075 pp_reg = PP_CONTROL;
1079 val = I915_READ(pp_reg);
1080 if (!(val & PANEL_POWER_ON) ||
1081 ((val & PANEL_UNLOCK_REGS) == PANEL_UNLOCK_REGS))
1084 if (I915_READ(lvds_reg) & LVDS_PIPEB_SELECT)
1085 panel_pipe = PIPE_B;
1087 WARN(panel_pipe == pipe && locked,
1088 "panel assertion failure, pipe %c regs locked\n",
1092 static void assert_cursor(struct drm_i915_private *dev_priv,
1093 enum pipe pipe, bool state)
1095 struct drm_device *dev = dev_priv->dev;
1098 if (IS_845G(dev) || IS_I865G(dev))
1099 cur_state = I915_READ(_CURACNTR) & CURSOR_ENABLE;
1100 else if (INTEL_INFO(dev)->gen <= 6 || IS_VALLEYVIEW(dev))
1101 cur_state = I915_READ(CURCNTR(pipe)) & CURSOR_MODE;
1103 cur_state = I915_READ(CURCNTR_IVB(pipe)) & CURSOR_MODE;
1105 WARN(cur_state != state,
1106 "cursor on pipe %c assertion failure (expected %s, current %s)\n",
1107 pipe_name(pipe), state_string(state), state_string(cur_state));
1109 #define assert_cursor_enabled(d, p) assert_cursor(d, p, true)
1110 #define assert_cursor_disabled(d, p) assert_cursor(d, p, false)
1112 void assert_pipe(struct drm_i915_private *dev_priv,
1113 enum pipe pipe, bool state)
1118 enum transcoder cpu_transcoder = intel_pipe_to_cpu_transcoder(dev_priv,
1121 /* if we need the pipe A quirk it must be always on */
1122 if (pipe == PIPE_A && dev_priv->quirks & QUIRK_PIPEA_FORCE)
1125 if (!intel_display_power_enabled(dev_priv,
1126 POWER_DOMAIN_TRANSCODER(cpu_transcoder))) {
1129 reg = PIPECONF(cpu_transcoder);
1130 val = I915_READ(reg);
1131 cur_state = !!(val & PIPECONF_ENABLE);
1134 WARN(cur_state != state,
1135 "pipe %c assertion failure (expected %s, current %s)\n",
1136 pipe_name(pipe), state_string(state), state_string(cur_state));
1139 static void assert_plane(struct drm_i915_private *dev_priv,
1140 enum plane plane, bool state)
1146 reg = DSPCNTR(plane);
1147 val = I915_READ(reg);
1148 cur_state = !!(val & DISPLAY_PLANE_ENABLE);
1149 WARN(cur_state != state,
1150 "plane %c assertion failure (expected %s, current %s)\n",
1151 plane_name(plane), state_string(state), state_string(cur_state));
1154 #define assert_plane_enabled(d, p) assert_plane(d, p, true)
1155 #define assert_plane_disabled(d, p) assert_plane(d, p, false)
1157 static void assert_planes_disabled(struct drm_i915_private *dev_priv,
1160 struct drm_device *dev = dev_priv->dev;
1165 /* Primary planes are fixed to pipes on gen4+ */
1166 if (INTEL_INFO(dev)->gen >= 4) {
1167 reg = DSPCNTR(pipe);
1168 val = I915_READ(reg);
1169 WARN(val & DISPLAY_PLANE_ENABLE,
1170 "plane %c assertion failure, should be disabled but not\n",
1175 /* Need to check both planes against the pipe */
1178 val = I915_READ(reg);
1179 cur_pipe = (val & DISPPLANE_SEL_PIPE_MASK) >>
1180 DISPPLANE_SEL_PIPE_SHIFT;
1181 WARN((val & DISPLAY_PLANE_ENABLE) && pipe == cur_pipe,
1182 "plane %c assertion failure, should be off on pipe %c but is still active\n",
1183 plane_name(i), pipe_name(pipe));
1187 static void assert_sprites_disabled(struct drm_i915_private *dev_priv,
1190 struct drm_device *dev = dev_priv->dev;
1194 if (IS_VALLEYVIEW(dev)) {
1195 for_each_sprite(pipe, sprite) {
1196 reg = SPCNTR(pipe, sprite);
1197 val = I915_READ(reg);
1198 WARN(val & SP_ENABLE,
1199 "sprite %c assertion failure, should be off on pipe %c but is still active\n",
1200 sprite_name(pipe, sprite), pipe_name(pipe));
1202 } else if (INTEL_INFO(dev)->gen >= 7) {
1204 val = I915_READ(reg);
1205 WARN(val & SPRITE_ENABLE,
1206 "sprite %c assertion failure, should be off on pipe %c but is still active\n",
1207 plane_name(pipe), pipe_name(pipe));
1208 } else if (INTEL_INFO(dev)->gen >= 5) {
1209 reg = DVSCNTR(pipe);
1210 val = I915_READ(reg);
1211 WARN(val & DVS_ENABLE,
1212 "sprite %c assertion failure, should be off on pipe %c but is still active\n",
1213 plane_name(pipe), pipe_name(pipe));
1217 static void ibx_assert_pch_refclk_enabled(struct drm_i915_private *dev_priv)
1222 WARN_ON(!(HAS_PCH_IBX(dev_priv->dev) || HAS_PCH_CPT(dev_priv->dev)));
1224 val = I915_READ(PCH_DREF_CONTROL);
1225 enabled = !!(val & (DREF_SSC_SOURCE_MASK | DREF_NONSPREAD_SOURCE_MASK |
1226 DREF_SUPERSPREAD_SOURCE_MASK));
1227 WARN(!enabled, "PCH refclk assertion failure, should be active but is disabled\n");
1230 static void assert_pch_transcoder_disabled(struct drm_i915_private *dev_priv,
1237 reg = PCH_TRANSCONF(pipe);
1238 val = I915_READ(reg);
1239 enabled = !!(val & TRANS_ENABLE);
1241 "transcoder assertion failed, should be off on pipe %c but is still active\n",
1245 static bool dp_pipe_enabled(struct drm_i915_private *dev_priv,
1246 enum pipe pipe, u32 port_sel, u32 val)
1248 if ((val & DP_PORT_EN) == 0)
1251 if (HAS_PCH_CPT(dev_priv->dev)) {
1252 u32 trans_dp_ctl_reg = TRANS_DP_CTL(pipe);
1253 u32 trans_dp_ctl = I915_READ(trans_dp_ctl_reg);
1254 if ((trans_dp_ctl & TRANS_DP_PORT_SEL_MASK) != port_sel)
1257 if ((val & DP_PIPE_MASK) != (pipe << 30))
1263 static bool hdmi_pipe_enabled(struct drm_i915_private *dev_priv,
1264 enum pipe pipe, u32 val)
1266 if ((val & SDVO_ENABLE) == 0)
1269 if (HAS_PCH_CPT(dev_priv->dev)) {
1270 if ((val & SDVO_PIPE_SEL_MASK_CPT) != SDVO_PIPE_SEL_CPT(pipe))
1273 if ((val & SDVO_PIPE_SEL_MASK) != SDVO_PIPE_SEL(pipe))
1279 static bool lvds_pipe_enabled(struct drm_i915_private *dev_priv,
1280 enum pipe pipe, u32 val)
1282 if ((val & LVDS_PORT_EN) == 0)
1285 if (HAS_PCH_CPT(dev_priv->dev)) {
1286 if ((val & PORT_TRANS_SEL_MASK) != PORT_TRANS_SEL_CPT(pipe))
1289 if ((val & LVDS_PIPE_MASK) != LVDS_PIPE(pipe))
1295 static bool adpa_pipe_enabled(struct drm_i915_private *dev_priv,
1296 enum pipe pipe, u32 val)
1298 if ((val & ADPA_DAC_ENABLE) == 0)
1300 if (HAS_PCH_CPT(dev_priv->dev)) {
1301 if ((val & PORT_TRANS_SEL_MASK) != PORT_TRANS_SEL_CPT(pipe))
1304 if ((val & ADPA_PIPE_SELECT_MASK) != ADPA_PIPE_SELECT(pipe))
1310 static void assert_pch_dp_disabled(struct drm_i915_private *dev_priv,
1311 enum pipe pipe, int reg, u32 port_sel)
1313 u32 val = I915_READ(reg);
1314 WARN(dp_pipe_enabled(dev_priv, pipe, port_sel, val),
1315 "PCH DP (0x%08x) enabled on transcoder %c, should be disabled\n",
1316 reg, pipe_name(pipe));
1318 WARN(HAS_PCH_IBX(dev_priv->dev) && (val & DP_PORT_EN) == 0
1319 && (val & DP_PIPEB_SELECT),
1320 "IBX PCH dp port still using transcoder B\n");
1323 static void assert_pch_hdmi_disabled(struct drm_i915_private *dev_priv,
1324 enum pipe pipe, int reg)
1326 u32 val = I915_READ(reg);
1327 WARN(hdmi_pipe_enabled(dev_priv, pipe, val),
1328 "PCH HDMI (0x%08x) enabled on transcoder %c, should be disabled\n",
1329 reg, pipe_name(pipe));
1331 WARN(HAS_PCH_IBX(dev_priv->dev) && (val & SDVO_ENABLE) == 0
1332 && (val & SDVO_PIPE_B_SELECT),
1333 "IBX PCH hdmi port still using transcoder B\n");
1336 static void assert_pch_ports_disabled(struct drm_i915_private *dev_priv,
1342 assert_pch_dp_disabled(dev_priv, pipe, PCH_DP_B, TRANS_DP_PORT_SEL_B);
1343 assert_pch_dp_disabled(dev_priv, pipe, PCH_DP_C, TRANS_DP_PORT_SEL_C);
1344 assert_pch_dp_disabled(dev_priv, pipe, PCH_DP_D, TRANS_DP_PORT_SEL_D);
1347 val = I915_READ(reg);
1348 WARN(adpa_pipe_enabled(dev_priv, pipe, val),
1349 "PCH VGA enabled on transcoder %c, should be disabled\n",
1353 val = I915_READ(reg);
1354 WARN(lvds_pipe_enabled(dev_priv, pipe, val),
1355 "PCH LVDS enabled on transcoder %c, should be disabled\n",
1358 assert_pch_hdmi_disabled(dev_priv, pipe, PCH_HDMIB);
1359 assert_pch_hdmi_disabled(dev_priv, pipe, PCH_HDMIC);
1360 assert_pch_hdmi_disabled(dev_priv, pipe, PCH_HDMID);
1363 static void intel_init_dpio(struct drm_device *dev)
1365 struct drm_i915_private *dev_priv = dev->dev_private;
1367 if (!IS_VALLEYVIEW(dev))
1370 DPIO_PHY_IOSF_PORT(DPIO_PHY0) = IOSF_PORT_DPIO;
1373 static void intel_reset_dpio(struct drm_device *dev)
1375 struct drm_i915_private *dev_priv = dev->dev_private;
1377 if (!IS_VALLEYVIEW(dev))
1381 * Enable the CRI clock source so we can get at the display and the
1382 * reference clock for VGA hotplug / manual detection.
1384 I915_WRITE(DPLL(PIPE_B), I915_READ(DPLL(PIPE_B)) |
1385 DPLL_REFA_CLK_ENABLE_VLV |
1386 DPLL_INTEGRATED_CRI_CLK_VLV);
1389 * From VLV2A0_DP_eDP_DPIO_driver_vbios_notes_10.docx -
1390 * 6. De-assert cmn_reset/side_reset. Same as VLV X0.
1391 * a. GUnit 0x2110 bit[0] set to 1 (def 0)
1392 * b. The other bits such as sfr settings / modesel may all be set
1395 * This should only be done on init and resume from S3 with both
1396 * PLLs disabled, or we risk losing DPIO and PLL synchronization.
1398 I915_WRITE(DPIO_CTL, I915_READ(DPIO_CTL) | DPIO_CMNRST);
1401 static void vlv_enable_pll(struct intel_crtc *crtc)
1403 struct drm_device *dev = crtc->base.dev;
1404 struct drm_i915_private *dev_priv = dev->dev_private;
1405 int reg = DPLL(crtc->pipe);
1406 u32 dpll = crtc->config.dpll_hw_state.dpll;
1408 assert_pipe_disabled(dev_priv, crtc->pipe);
1410 /* No really, not for ILK+ */
1411 BUG_ON(!IS_VALLEYVIEW(dev_priv->dev));
1413 /* PLL is protected by panel, make sure we can write it */
1414 if (IS_MOBILE(dev_priv->dev) && !IS_I830(dev_priv->dev))
1415 assert_panel_unlocked(dev_priv, crtc->pipe);
1417 I915_WRITE(reg, dpll);
1421 if (wait_for(((I915_READ(reg) & DPLL_LOCK_VLV) == DPLL_LOCK_VLV), 1))
1422 DRM_ERROR("DPLL %d failed to lock\n", crtc->pipe);
1424 I915_WRITE(DPLL_MD(crtc->pipe), crtc->config.dpll_hw_state.dpll_md);
1425 POSTING_READ(DPLL_MD(crtc->pipe));
1427 /* We do this three times for luck */
1428 I915_WRITE(reg, dpll);
1430 udelay(150); /* wait for warmup */
1431 I915_WRITE(reg, dpll);
1433 udelay(150); /* wait for warmup */
1434 I915_WRITE(reg, dpll);
1436 udelay(150); /* wait for warmup */
1439 static void i9xx_enable_pll(struct intel_crtc *crtc)
1441 struct drm_device *dev = crtc->base.dev;
1442 struct drm_i915_private *dev_priv = dev->dev_private;
1443 int reg = DPLL(crtc->pipe);
1444 u32 dpll = crtc->config.dpll_hw_state.dpll;
1446 assert_pipe_disabled(dev_priv, crtc->pipe);
1448 /* No really, not for ILK+ */
1449 BUG_ON(INTEL_INFO(dev)->gen >= 5);
1451 /* PLL is protected by panel, make sure we can write it */
1452 if (IS_MOBILE(dev) && !IS_I830(dev))
1453 assert_panel_unlocked(dev_priv, crtc->pipe);
1455 I915_WRITE(reg, dpll);
1457 /* Wait for the clocks to stabilize. */
1461 if (INTEL_INFO(dev)->gen >= 4) {
1462 I915_WRITE(DPLL_MD(crtc->pipe),
1463 crtc->config.dpll_hw_state.dpll_md);
1465 /* The pixel multiplier can only be updated once the
1466 * DPLL is enabled and the clocks are stable.
1468 * So write it again.
1470 I915_WRITE(reg, dpll);
1473 /* We do this three times for luck */
1474 I915_WRITE(reg, dpll);
1476 udelay(150); /* wait for warmup */
1477 I915_WRITE(reg, dpll);
1479 udelay(150); /* wait for warmup */
1480 I915_WRITE(reg, dpll);
1482 udelay(150); /* wait for warmup */
1486 * i9xx_disable_pll - disable a PLL
1487 * @dev_priv: i915 private structure
1488 * @pipe: pipe PLL to disable
1490 * Disable the PLL for @pipe, making sure the pipe is off first.
1492 * Note! This is for pre-ILK only.
1494 static void i9xx_disable_pll(struct drm_i915_private *dev_priv, enum pipe pipe)
1496 /* Don't disable pipe A or pipe A PLLs if needed */
1497 if (pipe == PIPE_A && (dev_priv->quirks & QUIRK_PIPEA_FORCE))
1500 /* Make sure the pipe isn't still relying on us */
1501 assert_pipe_disabled(dev_priv, pipe);
1503 I915_WRITE(DPLL(pipe), 0);
1504 POSTING_READ(DPLL(pipe));
1507 static void vlv_disable_pll(struct drm_i915_private *dev_priv, enum pipe pipe)
1511 /* Make sure the pipe isn't still relying on us */
1512 assert_pipe_disabled(dev_priv, pipe);
1515 * Leave integrated clock source and reference clock enabled for pipe B.
1516 * The latter is needed for VGA hotplug / manual detection.
1519 val = DPLL_INTEGRATED_CRI_CLK_VLV | DPLL_REFA_CLK_ENABLE_VLV;
1520 I915_WRITE(DPLL(pipe), val);
1521 POSTING_READ(DPLL(pipe));
1524 void vlv_wait_port_ready(struct drm_i915_private *dev_priv,
1525 struct intel_digital_port *dport)
1529 switch (dport->port) {
1531 port_mask = DPLL_PORTB_READY_MASK;
1534 port_mask = DPLL_PORTC_READY_MASK;
1540 if (wait_for((I915_READ(DPLL(0)) & port_mask) == 0, 1000))
1541 WARN(1, "timed out waiting for port %c ready: 0x%08x\n",
1542 port_name(dport->port), I915_READ(DPLL(0)));
1546 * ironlake_enable_shared_dpll - enable PCH PLL
1547 * @dev_priv: i915 private structure
1548 * @pipe: pipe PLL to enable
1550 * The PCH PLL needs to be enabled before the PCH transcoder, since it
1551 * drives the transcoder clock.
1553 static void ironlake_enable_shared_dpll(struct intel_crtc *crtc)
1555 struct drm_device *dev = crtc->base.dev;
1556 struct drm_i915_private *dev_priv = dev->dev_private;
1557 struct intel_shared_dpll *pll = intel_crtc_to_shared_dpll(crtc);
1559 /* PCH PLLs only available on ILK, SNB and IVB */
1560 BUG_ON(INTEL_INFO(dev)->gen < 5);
1561 if (WARN_ON(pll == NULL))
1564 if (WARN_ON(pll->refcount == 0))
1567 DRM_DEBUG_KMS("enable %s (active %d, on? %d)for crtc %d\n",
1568 pll->name, pll->active, pll->on,
1569 crtc->base.base.id);
1571 if (pll->active++) {
1573 assert_shared_dpll_enabled(dev_priv, pll);
1578 DRM_DEBUG_KMS("enabling %s\n", pll->name);
1579 pll->enable(dev_priv, pll);
1583 static void intel_disable_shared_dpll(struct intel_crtc *crtc)
1585 struct drm_device *dev = crtc->base.dev;
1586 struct drm_i915_private *dev_priv = dev->dev_private;
1587 struct intel_shared_dpll *pll = intel_crtc_to_shared_dpll(crtc);
1589 /* PCH only available on ILK+ */
1590 BUG_ON(INTEL_INFO(dev)->gen < 5);
1591 if (WARN_ON(pll == NULL))
1594 if (WARN_ON(pll->refcount == 0))
1597 DRM_DEBUG_KMS("disable %s (active %d, on? %d) for crtc %d\n",
1598 pll->name, pll->active, pll->on,
1599 crtc->base.base.id);
1601 if (WARN_ON(pll->active == 0)) {
1602 assert_shared_dpll_disabled(dev_priv, pll);
1606 assert_shared_dpll_enabled(dev_priv, pll);
1611 DRM_DEBUG_KMS("disabling %s\n", pll->name);
1612 pll->disable(dev_priv, pll);
1616 static void ironlake_enable_pch_transcoder(struct drm_i915_private *dev_priv,
1619 struct drm_device *dev = dev_priv->dev;
1620 struct drm_crtc *crtc = dev_priv->pipe_to_crtc_mapping[pipe];
1621 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
1622 uint32_t reg, val, pipeconf_val;
1624 /* PCH only available on ILK+ */
1625 BUG_ON(INTEL_INFO(dev)->gen < 5);
1627 /* Make sure PCH DPLL is enabled */
1628 assert_shared_dpll_enabled(dev_priv,
1629 intel_crtc_to_shared_dpll(intel_crtc));
1631 /* FDI must be feeding us bits for PCH ports */
1632 assert_fdi_tx_enabled(dev_priv, pipe);
1633 assert_fdi_rx_enabled(dev_priv, pipe);
1635 if (HAS_PCH_CPT(dev)) {
1636 /* Workaround: Set the timing override bit before enabling the
1637 * pch transcoder. */
1638 reg = TRANS_CHICKEN2(pipe);
1639 val = I915_READ(reg);
1640 val |= TRANS_CHICKEN2_TIMING_OVERRIDE;
1641 I915_WRITE(reg, val);
1644 reg = PCH_TRANSCONF(pipe);
1645 val = I915_READ(reg);
1646 pipeconf_val = I915_READ(PIPECONF(pipe));
1648 if (HAS_PCH_IBX(dev_priv->dev)) {
1650 * make the BPC in transcoder be consistent with
1651 * that in pipeconf reg.
1653 val &= ~PIPECONF_BPC_MASK;
1654 val |= pipeconf_val & PIPECONF_BPC_MASK;
1657 val &= ~TRANS_INTERLACE_MASK;
1658 if ((pipeconf_val & PIPECONF_INTERLACE_MASK) == PIPECONF_INTERLACED_ILK)
1659 if (HAS_PCH_IBX(dev_priv->dev) &&
1660 intel_pipe_has_type(crtc, INTEL_OUTPUT_SDVO))
1661 val |= TRANS_LEGACY_INTERLACED_ILK;
1663 val |= TRANS_INTERLACED;
1665 val |= TRANS_PROGRESSIVE;
1667 I915_WRITE(reg, val | TRANS_ENABLE);
1668 if (wait_for(I915_READ(reg) & TRANS_STATE_ENABLE, 100))
1669 DRM_ERROR("failed to enable transcoder %c\n", pipe_name(pipe));
1672 static void lpt_enable_pch_transcoder(struct drm_i915_private *dev_priv,
1673 enum transcoder cpu_transcoder)
1675 u32 val, pipeconf_val;
1677 /* PCH only available on ILK+ */
1678 BUG_ON(INTEL_INFO(dev_priv->dev)->gen < 5);
1680 /* FDI must be feeding us bits for PCH ports */
1681 assert_fdi_tx_enabled(dev_priv, (enum pipe) cpu_transcoder);
1682 assert_fdi_rx_enabled(dev_priv, TRANSCODER_A);
1684 /* Workaround: set timing override bit. */
1685 val = I915_READ(_TRANSA_CHICKEN2);
1686 val |= TRANS_CHICKEN2_TIMING_OVERRIDE;
1687 I915_WRITE(_TRANSA_CHICKEN2, val);
1690 pipeconf_val = I915_READ(PIPECONF(cpu_transcoder));
1692 if ((pipeconf_val & PIPECONF_INTERLACE_MASK_HSW) ==
1693 PIPECONF_INTERLACED_ILK)
1694 val |= TRANS_INTERLACED;
1696 val |= TRANS_PROGRESSIVE;
1698 I915_WRITE(LPT_TRANSCONF, val);
1699 if (wait_for(I915_READ(LPT_TRANSCONF) & TRANS_STATE_ENABLE, 100))
1700 DRM_ERROR("Failed to enable PCH transcoder\n");
1703 static void ironlake_disable_pch_transcoder(struct drm_i915_private *dev_priv,
1706 struct drm_device *dev = dev_priv->dev;
1709 /* FDI relies on the transcoder */
1710 assert_fdi_tx_disabled(dev_priv, pipe);
1711 assert_fdi_rx_disabled(dev_priv, pipe);
1713 /* Ports must be off as well */
1714 assert_pch_ports_disabled(dev_priv, pipe);
1716 reg = PCH_TRANSCONF(pipe);
1717 val = I915_READ(reg);
1718 val &= ~TRANS_ENABLE;
1719 I915_WRITE(reg, val);
1720 /* wait for PCH transcoder off, transcoder state */
1721 if (wait_for((I915_READ(reg) & TRANS_STATE_ENABLE) == 0, 50))
1722 DRM_ERROR("failed to disable transcoder %c\n", pipe_name(pipe));
1724 if (!HAS_PCH_IBX(dev)) {
1725 /* Workaround: Clear the timing override chicken bit again. */
1726 reg = TRANS_CHICKEN2(pipe);
1727 val = I915_READ(reg);
1728 val &= ~TRANS_CHICKEN2_TIMING_OVERRIDE;
1729 I915_WRITE(reg, val);
1733 static void lpt_disable_pch_transcoder(struct drm_i915_private *dev_priv)
1737 val = I915_READ(LPT_TRANSCONF);
1738 val &= ~TRANS_ENABLE;
1739 I915_WRITE(LPT_TRANSCONF, val);
1740 /* wait for PCH transcoder off, transcoder state */
1741 if (wait_for((I915_READ(LPT_TRANSCONF) & TRANS_STATE_ENABLE) == 0, 50))
1742 DRM_ERROR("Failed to disable PCH transcoder\n");
1744 /* Workaround: clear timing override bit. */
1745 val = I915_READ(_TRANSA_CHICKEN2);
1746 val &= ~TRANS_CHICKEN2_TIMING_OVERRIDE;
1747 I915_WRITE(_TRANSA_CHICKEN2, val);
1751 * intel_enable_pipe - enable a pipe, asserting requirements
1752 * @crtc: crtc responsible for the pipe
1754 * Enable @crtc's pipe, making sure that various hardware specific requirements
1755 * are met, if applicable, e.g. PLL enabled, LVDS pairs enabled, etc.
1757 static void intel_enable_pipe(struct intel_crtc *crtc)
1759 struct drm_device *dev = crtc->base.dev;
1760 struct drm_i915_private *dev_priv = dev->dev_private;
1761 enum pipe pipe = crtc->pipe;
1762 enum transcoder cpu_transcoder = intel_pipe_to_cpu_transcoder(dev_priv,
1764 enum pipe pch_transcoder;
1768 assert_planes_disabled(dev_priv, pipe);
1769 assert_cursor_disabled(dev_priv, pipe);
1770 assert_sprites_disabled(dev_priv, pipe);
1772 if (HAS_PCH_LPT(dev_priv->dev))
1773 pch_transcoder = TRANSCODER_A;
1775 pch_transcoder = pipe;
1778 * A pipe without a PLL won't actually be able to drive bits from
1779 * a plane. On ILK+ the pipe PLLs are integrated, so we don't
1782 if (!HAS_PCH_SPLIT(dev_priv->dev))
1783 if (intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_DSI))
1784 assert_dsi_pll_enabled(dev_priv);
1786 assert_pll_enabled(dev_priv, pipe);
1788 if (crtc->config.has_pch_encoder) {
1789 /* if driving the PCH, we need FDI enabled */
1790 assert_fdi_rx_pll_enabled(dev_priv, pch_transcoder);
1791 assert_fdi_tx_pll_enabled(dev_priv,
1792 (enum pipe) cpu_transcoder);
1794 /* FIXME: assert CPU port conditions for SNB+ */
1797 reg = PIPECONF(cpu_transcoder);
1798 val = I915_READ(reg);
1799 if (val & PIPECONF_ENABLE) {
1800 WARN_ON(!(pipe == PIPE_A &&
1801 dev_priv->quirks & QUIRK_PIPEA_FORCE));
1805 I915_WRITE(reg, val | PIPECONF_ENABLE);
1809 * There's no guarantee the pipe will really start running now. It
1810 * depends on the Gen, the output type and the relative order between
1811 * pipe and plane enabling. Avoid waiting on HSW+ since it's not
1813 * TODO: audit the previous gens.
1815 if (INTEL_INFO(dev)->gen <= 7 && !IS_HASWELL(dev))
1816 intel_wait_for_vblank(dev_priv->dev, pipe);
1820 * intel_disable_pipe - disable a pipe, asserting requirements
1821 * @dev_priv: i915 private structure
1822 * @pipe: pipe to disable
1824 * Disable @pipe, making sure that various hardware specific requirements
1825 * are met, if applicable, e.g. plane disabled, panel fitter off, etc.
1827 * @pipe should be %PIPE_A or %PIPE_B.
1829 * Will wait until the pipe has shut down before returning.
1831 static void intel_disable_pipe(struct drm_i915_private *dev_priv,
1834 enum transcoder cpu_transcoder = intel_pipe_to_cpu_transcoder(dev_priv,
1840 * Make sure planes won't keep trying to pump pixels to us,
1841 * or we might hang the display.
1843 assert_planes_disabled(dev_priv, pipe);
1844 assert_cursor_disabled(dev_priv, pipe);
1845 assert_sprites_disabled(dev_priv, pipe);
1847 /* Don't disable pipe A or pipe A PLLs if needed */
1848 if (pipe == PIPE_A && (dev_priv->quirks & QUIRK_PIPEA_FORCE))
1851 reg = PIPECONF(cpu_transcoder);
1852 val = I915_READ(reg);
1853 if ((val & PIPECONF_ENABLE) == 0)
1856 I915_WRITE(reg, val & ~PIPECONF_ENABLE);
1857 intel_wait_for_pipe_off(dev_priv->dev, pipe);
1861 * Plane regs are double buffered, going from enabled->disabled needs a
1862 * trigger in order to latch. The display address reg provides this.
1864 void intel_flush_primary_plane(struct drm_i915_private *dev_priv,
1867 struct drm_device *dev = dev_priv->dev;
1868 u32 reg = INTEL_INFO(dev)->gen >= 4 ? DSPSURF(plane) : DSPADDR(plane);
1870 I915_WRITE(reg, I915_READ(reg));
1875 * intel_enable_primary_hw_plane - enable the primary plane on a given pipe
1876 * @dev_priv: i915 private structure
1877 * @plane: plane to enable
1878 * @pipe: pipe being fed
1880 * Enable @plane on @pipe, making sure that @pipe is running first.
1882 static void intel_enable_primary_hw_plane(struct drm_i915_private *dev_priv,
1883 enum plane plane, enum pipe pipe)
1885 struct intel_crtc *intel_crtc =
1886 to_intel_crtc(dev_priv->pipe_to_crtc_mapping[pipe]);
1890 /* If the pipe isn't enabled, we can't pump pixels and may hang */
1891 assert_pipe_enabled(dev_priv, pipe);
1893 WARN(intel_crtc->primary_enabled, "Primary plane already enabled\n");
1895 intel_crtc->primary_enabled = true;
1897 reg = DSPCNTR(plane);
1898 val = I915_READ(reg);
1899 if (val & DISPLAY_PLANE_ENABLE)
1902 I915_WRITE(reg, val | DISPLAY_PLANE_ENABLE);
1903 intel_flush_primary_plane(dev_priv, plane);
1904 intel_wait_for_vblank(dev_priv->dev, pipe);
1908 * intel_disable_primary_hw_plane - disable the primary hardware plane
1909 * @dev_priv: i915 private structure
1910 * @plane: plane to disable
1911 * @pipe: pipe consuming the data
1913 * Disable @plane; should be an independent operation.
1915 static void intel_disable_primary_hw_plane(struct drm_i915_private *dev_priv,
1916 enum plane plane, enum pipe pipe)
1918 struct intel_crtc *intel_crtc =
1919 to_intel_crtc(dev_priv->pipe_to_crtc_mapping[pipe]);
1923 WARN(!intel_crtc->primary_enabled, "Primary plane already disabled\n");
1925 intel_crtc->primary_enabled = false;
1927 reg = DSPCNTR(plane);
1928 val = I915_READ(reg);
1929 if ((val & DISPLAY_PLANE_ENABLE) == 0)
1932 I915_WRITE(reg, val & ~DISPLAY_PLANE_ENABLE);
1933 intel_flush_primary_plane(dev_priv, plane);
1934 intel_wait_for_vblank(dev_priv->dev, pipe);
1937 static bool need_vtd_wa(struct drm_device *dev)
1939 #ifdef CONFIG_INTEL_IOMMU
1940 if (INTEL_INFO(dev)->gen >= 6 && intel_iommu_gfx_mapped)
1946 static int intel_align_height(struct drm_device *dev, int height, bool tiled)
1950 tile_height = tiled ? (IS_GEN2(dev) ? 16 : 8) : 1;
1951 return ALIGN(height, tile_height);
1955 intel_pin_and_fence_fb_obj(struct drm_device *dev,
1956 struct drm_i915_gem_object *obj,
1957 struct intel_ring_buffer *pipelined)
1959 struct drm_i915_private *dev_priv = dev->dev_private;
1963 switch (obj->tiling_mode) {
1964 case I915_TILING_NONE:
1965 if (IS_BROADWATER(dev) || IS_CRESTLINE(dev))
1966 alignment = 128 * 1024;
1967 else if (INTEL_INFO(dev)->gen >= 4)
1968 alignment = 4 * 1024;
1970 alignment = 64 * 1024;
1973 /* pin() will align the object as required by fence */
1977 WARN(1, "Y tiled bo slipped through, driver bug!\n");
1983 /* Note that the w/a also requires 64 PTE of padding following the
1984 * bo. We currently fill all unused PTE with the shadow page and so
1985 * we should always have valid PTE following the scanout preventing
1988 if (need_vtd_wa(dev) && alignment < 256 * 1024)
1989 alignment = 256 * 1024;
1991 dev_priv->mm.interruptible = false;
1992 ret = i915_gem_object_pin_to_display_plane(obj, alignment, pipelined);
1994 goto err_interruptible;
1996 /* Install a fence for tiled scan-out. Pre-i965 always needs a
1997 * fence, whereas 965+ only requires a fence if using
1998 * framebuffer compression. For simplicity, we always install
1999 * a fence as the cost is not that onerous.
2001 ret = i915_gem_object_get_fence(obj);
2005 i915_gem_object_pin_fence(obj);
2007 dev_priv->mm.interruptible = true;
2011 i915_gem_object_unpin_from_display_plane(obj);
2013 dev_priv->mm.interruptible = true;
2017 void intel_unpin_fb_obj(struct drm_i915_gem_object *obj)
2019 i915_gem_object_unpin_fence(obj);
2020 i915_gem_object_unpin_from_display_plane(obj);
2023 /* Computes the linear offset to the base tile and adjusts x, y. bytes per pixel
2024 * is assumed to be a power-of-two. */
2025 unsigned long intel_gen4_compute_page_offset(int *x, int *y,
2026 unsigned int tiling_mode,
2030 if (tiling_mode != I915_TILING_NONE) {
2031 unsigned int tile_rows, tiles;
2036 tiles = *x / (512/cpp);
2039 return tile_rows * pitch * 8 + tiles * 4096;
2041 unsigned int offset;
2043 offset = *y * pitch + *x * cpp;
2045 *x = (offset & 4095) / cpp;
2046 return offset & -4096;
2050 int intel_format_to_fourcc(int format)
2053 case DISPPLANE_8BPP:
2054 return DRM_FORMAT_C8;
2055 case DISPPLANE_BGRX555:
2056 return DRM_FORMAT_XRGB1555;
2057 case DISPPLANE_BGRX565:
2058 return DRM_FORMAT_RGB565;
2060 case DISPPLANE_BGRX888:
2061 return DRM_FORMAT_XRGB8888;
2062 case DISPPLANE_RGBX888:
2063 return DRM_FORMAT_XBGR8888;
2064 case DISPPLANE_BGRX101010:
2065 return DRM_FORMAT_XRGB2101010;
2066 case DISPPLANE_RGBX101010:
2067 return DRM_FORMAT_XBGR2101010;
2071 static bool intel_alloc_plane_obj(struct intel_crtc *crtc,
2072 struct intel_plane_config *plane_config)
2074 struct drm_device *dev = crtc->base.dev;
2075 struct drm_i915_gem_object *obj = NULL;
2076 struct drm_mode_fb_cmd2 mode_cmd = { 0 };
2077 u32 base = plane_config->base;
2079 if (plane_config->size == 0)
2082 obj = i915_gem_object_create_stolen_for_preallocated(dev, base, base,
2083 plane_config->size);
2087 if (plane_config->tiled) {
2088 obj->tiling_mode = I915_TILING_X;
2089 obj->stride = crtc->base.primary->fb->pitches[0];
2092 mode_cmd.pixel_format = crtc->base.primary->fb->pixel_format;
2093 mode_cmd.width = crtc->base.primary->fb->width;
2094 mode_cmd.height = crtc->base.primary->fb->height;
2095 mode_cmd.pitches[0] = crtc->base.primary->fb->pitches[0];
2097 mutex_lock(&dev->struct_mutex);
2099 if (intel_framebuffer_init(dev, to_intel_framebuffer(crtc->base.primary->fb),
2101 DRM_DEBUG_KMS("intel fb init failed\n");
2105 mutex_unlock(&dev->struct_mutex);
2107 DRM_DEBUG_KMS("plane fb obj %p\n", obj);
2111 drm_gem_object_unreference(&obj->base);
2112 mutex_unlock(&dev->struct_mutex);
2116 static void intel_find_plane_obj(struct intel_crtc *intel_crtc,
2117 struct intel_plane_config *plane_config)
2119 struct drm_device *dev = intel_crtc->base.dev;
2121 struct intel_crtc *i;
2122 struct intel_framebuffer *fb;
2124 if (!intel_crtc->base.primary->fb)
2127 if (intel_alloc_plane_obj(intel_crtc, plane_config))
2130 kfree(intel_crtc->base.primary->fb);
2131 intel_crtc->base.primary->fb = NULL;
2134 * Failed to alloc the obj, check to see if we should share
2135 * an fb with another CRTC instead
2137 list_for_each_entry(c, &dev->mode_config.crtc_list, head) {
2138 i = to_intel_crtc(c);
2140 if (c == &intel_crtc->base)
2143 if (!i->active || !c->primary->fb)
2146 fb = to_intel_framebuffer(c->primary->fb);
2147 if (i915_gem_obj_ggtt_offset(fb->obj) == plane_config->base) {
2148 drm_framebuffer_reference(c->primary->fb);
2149 intel_crtc->base.primary->fb = c->primary->fb;
2155 static int i9xx_update_primary_plane(struct drm_crtc *crtc,
2156 struct drm_framebuffer *fb,
2159 struct drm_device *dev = crtc->dev;
2160 struct drm_i915_private *dev_priv = dev->dev_private;
2161 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
2162 struct intel_framebuffer *intel_fb;
2163 struct drm_i915_gem_object *obj;
2164 int plane = intel_crtc->plane;
2165 unsigned long linear_offset;
2174 DRM_ERROR("Can't update plane %c in SAREA\n", plane_name(plane));
2178 intel_fb = to_intel_framebuffer(fb);
2179 obj = intel_fb->obj;
2181 reg = DSPCNTR(plane);
2182 dspcntr = I915_READ(reg);
2183 /* Mask out pixel format bits in case we change it */
2184 dspcntr &= ~DISPPLANE_PIXFORMAT_MASK;
2185 switch (fb->pixel_format) {
2187 dspcntr |= DISPPLANE_8BPP;
2189 case DRM_FORMAT_XRGB1555:
2190 case DRM_FORMAT_ARGB1555:
2191 dspcntr |= DISPPLANE_BGRX555;
2193 case DRM_FORMAT_RGB565:
2194 dspcntr |= DISPPLANE_BGRX565;
2196 case DRM_FORMAT_XRGB8888:
2197 case DRM_FORMAT_ARGB8888:
2198 dspcntr |= DISPPLANE_BGRX888;
2200 case DRM_FORMAT_XBGR8888:
2201 case DRM_FORMAT_ABGR8888:
2202 dspcntr |= DISPPLANE_RGBX888;
2204 case DRM_FORMAT_XRGB2101010:
2205 case DRM_FORMAT_ARGB2101010:
2206 dspcntr |= DISPPLANE_BGRX101010;
2208 case DRM_FORMAT_XBGR2101010:
2209 case DRM_FORMAT_ABGR2101010:
2210 dspcntr |= DISPPLANE_RGBX101010;
2216 if (INTEL_INFO(dev)->gen >= 4) {
2217 if (obj->tiling_mode != I915_TILING_NONE)
2218 dspcntr |= DISPPLANE_TILED;
2220 dspcntr &= ~DISPPLANE_TILED;
2224 dspcntr |= DISPPLANE_TRICKLE_FEED_DISABLE;
2226 I915_WRITE(reg, dspcntr);
2228 linear_offset = y * fb->pitches[0] + x * (fb->bits_per_pixel / 8);
2230 if (INTEL_INFO(dev)->gen >= 4) {
2231 intel_crtc->dspaddr_offset =
2232 intel_gen4_compute_page_offset(&x, &y, obj->tiling_mode,
2233 fb->bits_per_pixel / 8,
2235 linear_offset -= intel_crtc->dspaddr_offset;
2237 intel_crtc->dspaddr_offset = linear_offset;
2240 DRM_DEBUG_KMS("Writing base %08lX %08lX %d %d %d\n",
2241 i915_gem_obj_ggtt_offset(obj), linear_offset, x, y,
2243 I915_WRITE(DSPSTRIDE(plane), fb->pitches[0]);
2244 if (INTEL_INFO(dev)->gen >= 4) {
2245 I915_WRITE(DSPSURF(plane),
2246 i915_gem_obj_ggtt_offset(obj) + intel_crtc->dspaddr_offset);
2247 I915_WRITE(DSPTILEOFF(plane), (y << 16) | x);
2248 I915_WRITE(DSPLINOFF(plane), linear_offset);
2250 I915_WRITE(DSPADDR(plane), i915_gem_obj_ggtt_offset(obj) + linear_offset);
2256 static int ironlake_update_primary_plane(struct drm_crtc *crtc,
2257 struct drm_framebuffer *fb,
2260 struct drm_device *dev = crtc->dev;
2261 struct drm_i915_private *dev_priv = dev->dev_private;
2262 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
2263 struct intel_framebuffer *intel_fb;
2264 struct drm_i915_gem_object *obj;
2265 int plane = intel_crtc->plane;
2266 unsigned long linear_offset;
2276 DRM_ERROR("Can't update plane %c in SAREA\n", plane_name(plane));
2280 intel_fb = to_intel_framebuffer(fb);
2281 obj = intel_fb->obj;
2283 reg = DSPCNTR(plane);
2284 dspcntr = I915_READ(reg);
2285 /* Mask out pixel format bits in case we change it */
2286 dspcntr &= ~DISPPLANE_PIXFORMAT_MASK;
2287 switch (fb->pixel_format) {
2289 dspcntr |= DISPPLANE_8BPP;
2291 case DRM_FORMAT_RGB565:
2292 dspcntr |= DISPPLANE_BGRX565;
2294 case DRM_FORMAT_XRGB8888:
2295 case DRM_FORMAT_ARGB8888:
2296 dspcntr |= DISPPLANE_BGRX888;
2298 case DRM_FORMAT_XBGR8888:
2299 case DRM_FORMAT_ABGR8888:
2300 dspcntr |= DISPPLANE_RGBX888;
2302 case DRM_FORMAT_XRGB2101010:
2303 case DRM_FORMAT_ARGB2101010:
2304 dspcntr |= DISPPLANE_BGRX101010;
2306 case DRM_FORMAT_XBGR2101010:
2307 case DRM_FORMAT_ABGR2101010:
2308 dspcntr |= DISPPLANE_RGBX101010;
2314 if (obj->tiling_mode != I915_TILING_NONE)
2315 dspcntr |= DISPPLANE_TILED;
2317 dspcntr &= ~DISPPLANE_TILED;
2319 if (IS_HASWELL(dev) || IS_BROADWELL(dev))
2320 dspcntr &= ~DISPPLANE_TRICKLE_FEED_DISABLE;
2322 dspcntr |= DISPPLANE_TRICKLE_FEED_DISABLE;
2324 I915_WRITE(reg, dspcntr);
2326 linear_offset = y * fb->pitches[0] + x * (fb->bits_per_pixel / 8);
2327 intel_crtc->dspaddr_offset =
2328 intel_gen4_compute_page_offset(&x, &y, obj->tiling_mode,
2329 fb->bits_per_pixel / 8,
2331 linear_offset -= intel_crtc->dspaddr_offset;
2333 DRM_DEBUG_KMS("Writing base %08lX %08lX %d %d %d\n",
2334 i915_gem_obj_ggtt_offset(obj), linear_offset, x, y,
2336 I915_WRITE(DSPSTRIDE(plane), fb->pitches[0]);
2337 I915_WRITE(DSPSURF(plane),
2338 i915_gem_obj_ggtt_offset(obj) + intel_crtc->dspaddr_offset);
2339 if (IS_HASWELL(dev) || IS_BROADWELL(dev)) {
2340 I915_WRITE(DSPOFFSET(plane), (y << 16) | x);
2342 I915_WRITE(DSPTILEOFF(plane), (y << 16) | x);
2343 I915_WRITE(DSPLINOFF(plane), linear_offset);
2350 /* Assume fb object is pinned & idle & fenced and just update base pointers */
2352 intel_pipe_set_base_atomic(struct drm_crtc *crtc, struct drm_framebuffer *fb,
2353 int x, int y, enum mode_set_atomic state)
2355 struct drm_device *dev = crtc->dev;
2356 struct drm_i915_private *dev_priv = dev->dev_private;
2358 if (dev_priv->display.disable_fbc)
2359 dev_priv->display.disable_fbc(dev);
2360 intel_increase_pllclock(crtc);
2362 return dev_priv->display.update_primary_plane(crtc, fb, x, y);
2365 void intel_display_handle_reset(struct drm_device *dev)
2367 struct drm_i915_private *dev_priv = dev->dev_private;
2368 struct drm_crtc *crtc;
2371 * Flips in the rings have been nuked by the reset,
2372 * so complete all pending flips so that user space
2373 * will get its events and not get stuck.
2375 * Also update the base address of all primary
2376 * planes to the the last fb to make sure we're
2377 * showing the correct fb after a reset.
2379 * Need to make two loops over the crtcs so that we
2380 * don't try to grab a crtc mutex before the
2381 * pending_flip_queue really got woken up.
2384 list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
2385 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
2386 enum plane plane = intel_crtc->plane;
2388 intel_prepare_page_flip(dev, plane);
2389 intel_finish_page_flip_plane(dev, plane);
2392 list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
2393 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
2395 mutex_lock(&crtc->mutex);
2397 * FIXME: Once we have proper support for primary planes (and
2398 * disabling them without disabling the entire crtc) allow again
2399 * a NULL crtc->primary->fb.
2401 if (intel_crtc->active && crtc->primary->fb)
2402 dev_priv->display.update_primary_plane(crtc,
2406 mutex_unlock(&crtc->mutex);
2411 intel_finish_fb(struct drm_framebuffer *old_fb)
2413 struct drm_i915_gem_object *obj = to_intel_framebuffer(old_fb)->obj;
2414 struct drm_i915_private *dev_priv = obj->base.dev->dev_private;
2415 bool was_interruptible = dev_priv->mm.interruptible;
2418 /* Big Hammer, we also need to ensure that any pending
2419 * MI_WAIT_FOR_EVENT inside a user batch buffer on the
2420 * current scanout is retired before unpinning the old
2423 * This should only fail upon a hung GPU, in which case we
2424 * can safely continue.
2426 dev_priv->mm.interruptible = false;
2427 ret = i915_gem_object_finish_gpu(obj);
2428 dev_priv->mm.interruptible = was_interruptible;
2433 static bool intel_crtc_has_pending_flip(struct drm_crtc *crtc)
2435 struct drm_device *dev = crtc->dev;
2436 struct drm_i915_private *dev_priv = dev->dev_private;
2437 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
2438 unsigned long flags;
2441 if (i915_reset_in_progress(&dev_priv->gpu_error) ||
2442 intel_crtc->reset_counter != atomic_read(&dev_priv->gpu_error.reset_counter))
2445 spin_lock_irqsave(&dev->event_lock, flags);
2446 pending = to_intel_crtc(crtc)->unpin_work != NULL;
2447 spin_unlock_irqrestore(&dev->event_lock, flags);
2453 intel_pipe_set_base(struct drm_crtc *crtc, int x, int y,
2454 struct drm_framebuffer *fb)
2456 struct drm_device *dev = crtc->dev;
2457 struct drm_i915_private *dev_priv = dev->dev_private;
2458 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
2459 struct drm_framebuffer *old_fb;
2462 if (intel_crtc_has_pending_flip(crtc)) {
2463 DRM_ERROR("pipe is still busy with an old pageflip\n");
2469 DRM_ERROR("No FB bound\n");
2473 if (intel_crtc->plane > INTEL_INFO(dev)->num_pipes) {
2474 DRM_ERROR("no plane for crtc: plane %c, num_pipes %d\n",
2475 plane_name(intel_crtc->plane),
2476 INTEL_INFO(dev)->num_pipes);
2480 mutex_lock(&dev->struct_mutex);
2481 ret = intel_pin_and_fence_fb_obj(dev,
2482 to_intel_framebuffer(fb)->obj,
2484 mutex_unlock(&dev->struct_mutex);
2486 DRM_ERROR("pin & fence failed\n");
2491 * Update pipe size and adjust fitter if needed: the reason for this is
2492 * that in compute_mode_changes we check the native mode (not the pfit
2493 * mode) to see if we can flip rather than do a full mode set. In the
2494 * fastboot case, we'll flip, but if we don't update the pipesrc and
2495 * pfit state, we'll end up with a big fb scanned out into the wrong
2498 * To fix this properly, we need to hoist the checks up into
2499 * compute_mode_changes (or above), check the actual pfit state and
2500 * whether the platform allows pfit disable with pipe active, and only
2501 * then update the pipesrc and pfit state, even on the flip path.
2503 if (i915.fastboot) {
2504 const struct drm_display_mode *adjusted_mode =
2505 &intel_crtc->config.adjusted_mode;
2507 I915_WRITE(PIPESRC(intel_crtc->pipe),
2508 ((adjusted_mode->crtc_hdisplay - 1) << 16) |
2509 (adjusted_mode->crtc_vdisplay - 1));
2510 if (!intel_crtc->config.pch_pfit.enabled &&
2511 (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) ||
2512 intel_pipe_has_type(crtc, INTEL_OUTPUT_EDP))) {
2513 I915_WRITE(PF_CTL(intel_crtc->pipe), 0);
2514 I915_WRITE(PF_WIN_POS(intel_crtc->pipe), 0);
2515 I915_WRITE(PF_WIN_SZ(intel_crtc->pipe), 0);
2517 intel_crtc->config.pipe_src_w = adjusted_mode->crtc_hdisplay;
2518 intel_crtc->config.pipe_src_h = adjusted_mode->crtc_vdisplay;
2521 ret = dev_priv->display.update_primary_plane(crtc, fb, x, y);
2523 mutex_lock(&dev->struct_mutex);
2524 intel_unpin_fb_obj(to_intel_framebuffer(fb)->obj);
2525 mutex_unlock(&dev->struct_mutex);
2526 DRM_ERROR("failed to update base address\n");
2530 old_fb = crtc->primary->fb;
2531 crtc->primary->fb = fb;
2536 if (intel_crtc->active && old_fb != fb)
2537 intel_wait_for_vblank(dev, intel_crtc->pipe);
2538 mutex_lock(&dev->struct_mutex);
2539 intel_unpin_fb_obj(to_intel_framebuffer(old_fb)->obj);
2540 mutex_unlock(&dev->struct_mutex);
2543 mutex_lock(&dev->struct_mutex);
2544 intel_update_fbc(dev);
2545 intel_edp_psr_update(dev);
2546 mutex_unlock(&dev->struct_mutex);
2551 static void intel_fdi_normal_train(struct drm_crtc *crtc)
2553 struct drm_device *dev = crtc->dev;
2554 struct drm_i915_private *dev_priv = dev->dev_private;
2555 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
2556 int pipe = intel_crtc->pipe;
2559 /* enable normal train */
2560 reg = FDI_TX_CTL(pipe);
2561 temp = I915_READ(reg);
2562 if (IS_IVYBRIDGE(dev)) {
2563 temp &= ~FDI_LINK_TRAIN_NONE_IVB;
2564 temp |= FDI_LINK_TRAIN_NONE_IVB | FDI_TX_ENHANCE_FRAME_ENABLE;
2566 temp &= ~FDI_LINK_TRAIN_NONE;
2567 temp |= FDI_LINK_TRAIN_NONE | FDI_TX_ENHANCE_FRAME_ENABLE;
2569 I915_WRITE(reg, temp);
2571 reg = FDI_RX_CTL(pipe);
2572 temp = I915_READ(reg);
2573 if (HAS_PCH_CPT(dev)) {
2574 temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
2575 temp |= FDI_LINK_TRAIN_NORMAL_CPT;
2577 temp &= ~FDI_LINK_TRAIN_NONE;
2578 temp |= FDI_LINK_TRAIN_NONE;
2580 I915_WRITE(reg, temp | FDI_RX_ENHANCE_FRAME_ENABLE);
2582 /* wait one idle pattern time */
2586 /* IVB wants error correction enabled */
2587 if (IS_IVYBRIDGE(dev))
2588 I915_WRITE(reg, I915_READ(reg) | FDI_FS_ERRC_ENABLE |
2589 FDI_FE_ERRC_ENABLE);
2592 static bool pipe_has_enabled_pch(struct intel_crtc *crtc)
2594 return crtc->base.enabled && crtc->active &&
2595 crtc->config.has_pch_encoder;
2598 static void ivb_modeset_global_resources(struct drm_device *dev)
2600 struct drm_i915_private *dev_priv = dev->dev_private;
2601 struct intel_crtc *pipe_B_crtc =
2602 to_intel_crtc(dev_priv->pipe_to_crtc_mapping[PIPE_B]);
2603 struct intel_crtc *pipe_C_crtc =
2604 to_intel_crtc(dev_priv->pipe_to_crtc_mapping[PIPE_C]);
2608 * When everything is off disable fdi C so that we could enable fdi B
2609 * with all lanes. Note that we don't care about enabled pipes without
2610 * an enabled pch encoder.
2612 if (!pipe_has_enabled_pch(pipe_B_crtc) &&
2613 !pipe_has_enabled_pch(pipe_C_crtc)) {
2614 WARN_ON(I915_READ(FDI_RX_CTL(PIPE_B)) & FDI_RX_ENABLE);
2615 WARN_ON(I915_READ(FDI_RX_CTL(PIPE_C)) & FDI_RX_ENABLE);
2617 temp = I915_READ(SOUTH_CHICKEN1);
2618 temp &= ~FDI_BC_BIFURCATION_SELECT;
2619 DRM_DEBUG_KMS("disabling fdi C rx\n");
2620 I915_WRITE(SOUTH_CHICKEN1, temp);
2624 /* The FDI link training functions for ILK/Ibexpeak. */
2625 static void ironlake_fdi_link_train(struct drm_crtc *crtc)
2627 struct drm_device *dev = crtc->dev;
2628 struct drm_i915_private *dev_priv = dev->dev_private;
2629 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
2630 int pipe = intel_crtc->pipe;
2631 int plane = intel_crtc->plane;
2632 u32 reg, temp, tries;
2634 /* FDI needs bits from pipe & plane first */
2635 assert_pipe_enabled(dev_priv, pipe);
2636 assert_plane_enabled(dev_priv, plane);
2638 /* Train 1: umask FDI RX Interrupt symbol_lock and bit_lock bit
2640 reg = FDI_RX_IMR(pipe);
2641 temp = I915_READ(reg);
2642 temp &= ~FDI_RX_SYMBOL_LOCK;
2643 temp &= ~FDI_RX_BIT_LOCK;
2644 I915_WRITE(reg, temp);
2648 /* enable CPU FDI TX and PCH FDI RX */
2649 reg = FDI_TX_CTL(pipe);
2650 temp = I915_READ(reg);
2651 temp &= ~FDI_DP_PORT_WIDTH_MASK;
2652 temp |= FDI_DP_PORT_WIDTH(intel_crtc->config.fdi_lanes);
2653 temp &= ~FDI_LINK_TRAIN_NONE;
2654 temp |= FDI_LINK_TRAIN_PATTERN_1;
2655 I915_WRITE(reg, temp | FDI_TX_ENABLE);
2657 reg = FDI_RX_CTL(pipe);
2658 temp = I915_READ(reg);
2659 temp &= ~FDI_LINK_TRAIN_NONE;
2660 temp |= FDI_LINK_TRAIN_PATTERN_1;
2661 I915_WRITE(reg, temp | FDI_RX_ENABLE);
2666 /* Ironlake workaround, enable clock pointer after FDI enable*/
2667 I915_WRITE(FDI_RX_CHICKEN(pipe), FDI_RX_PHASE_SYNC_POINTER_OVR);
2668 I915_WRITE(FDI_RX_CHICKEN(pipe), FDI_RX_PHASE_SYNC_POINTER_OVR |
2669 FDI_RX_PHASE_SYNC_POINTER_EN);
2671 reg = FDI_RX_IIR(pipe);
2672 for (tries = 0; tries < 5; tries++) {
2673 temp = I915_READ(reg);
2674 DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
2676 if ((temp & FDI_RX_BIT_LOCK)) {
2677 DRM_DEBUG_KMS("FDI train 1 done.\n");
2678 I915_WRITE(reg, temp | FDI_RX_BIT_LOCK);
2683 DRM_ERROR("FDI train 1 fail!\n");
2686 reg = FDI_TX_CTL(pipe);
2687 temp = I915_READ(reg);
2688 temp &= ~FDI_LINK_TRAIN_NONE;
2689 temp |= FDI_LINK_TRAIN_PATTERN_2;
2690 I915_WRITE(reg, temp);
2692 reg = FDI_RX_CTL(pipe);
2693 temp = I915_READ(reg);
2694 temp &= ~FDI_LINK_TRAIN_NONE;
2695 temp |= FDI_LINK_TRAIN_PATTERN_2;
2696 I915_WRITE(reg, temp);
2701 reg = FDI_RX_IIR(pipe);
2702 for (tries = 0; tries < 5; tries++) {
2703 temp = I915_READ(reg);
2704 DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
2706 if (temp & FDI_RX_SYMBOL_LOCK) {
2707 I915_WRITE(reg, temp | FDI_RX_SYMBOL_LOCK);
2708 DRM_DEBUG_KMS("FDI train 2 done.\n");
2713 DRM_ERROR("FDI train 2 fail!\n");
2715 DRM_DEBUG_KMS("FDI train done\n");
2719 static const int snb_b_fdi_train_param[] = {
2720 FDI_LINK_TRAIN_400MV_0DB_SNB_B,
2721 FDI_LINK_TRAIN_400MV_6DB_SNB_B,
2722 FDI_LINK_TRAIN_600MV_3_5DB_SNB_B,
2723 FDI_LINK_TRAIN_800MV_0DB_SNB_B,
2726 /* The FDI link training functions for SNB/Cougarpoint. */
2727 static void gen6_fdi_link_train(struct drm_crtc *crtc)
2729 struct drm_device *dev = crtc->dev;
2730 struct drm_i915_private *dev_priv = dev->dev_private;
2731 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
2732 int pipe = intel_crtc->pipe;
2733 u32 reg, temp, i, retry;
2735 /* Train 1: umask FDI RX Interrupt symbol_lock and bit_lock bit
2737 reg = FDI_RX_IMR(pipe);
2738 temp = I915_READ(reg);
2739 temp &= ~FDI_RX_SYMBOL_LOCK;
2740 temp &= ~FDI_RX_BIT_LOCK;
2741 I915_WRITE(reg, temp);
2746 /* enable CPU FDI TX and PCH FDI RX */
2747 reg = FDI_TX_CTL(pipe);
2748 temp = I915_READ(reg);
2749 temp &= ~FDI_DP_PORT_WIDTH_MASK;
2750 temp |= FDI_DP_PORT_WIDTH(intel_crtc->config.fdi_lanes);
2751 temp &= ~FDI_LINK_TRAIN_NONE;
2752 temp |= FDI_LINK_TRAIN_PATTERN_1;
2753 temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
2755 temp |= FDI_LINK_TRAIN_400MV_0DB_SNB_B;
2756 I915_WRITE(reg, temp | FDI_TX_ENABLE);
2758 I915_WRITE(FDI_RX_MISC(pipe),
2759 FDI_RX_TP1_TO_TP2_48 | FDI_RX_FDI_DELAY_90);
2761 reg = FDI_RX_CTL(pipe);
2762 temp = I915_READ(reg);
2763 if (HAS_PCH_CPT(dev)) {
2764 temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
2765 temp |= FDI_LINK_TRAIN_PATTERN_1_CPT;
2767 temp &= ~FDI_LINK_TRAIN_NONE;
2768 temp |= FDI_LINK_TRAIN_PATTERN_1;
2770 I915_WRITE(reg, temp | FDI_RX_ENABLE);
2775 for (i = 0; i < 4; i++) {
2776 reg = FDI_TX_CTL(pipe);
2777 temp = I915_READ(reg);
2778 temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
2779 temp |= snb_b_fdi_train_param[i];
2780 I915_WRITE(reg, temp);
2785 for (retry = 0; retry < 5; retry++) {
2786 reg = FDI_RX_IIR(pipe);
2787 temp = I915_READ(reg);
2788 DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
2789 if (temp & FDI_RX_BIT_LOCK) {
2790 I915_WRITE(reg, temp | FDI_RX_BIT_LOCK);
2791 DRM_DEBUG_KMS("FDI train 1 done.\n");
2800 DRM_ERROR("FDI train 1 fail!\n");
2803 reg = FDI_TX_CTL(pipe);
2804 temp = I915_READ(reg);
2805 temp &= ~FDI_LINK_TRAIN_NONE;
2806 temp |= FDI_LINK_TRAIN_PATTERN_2;
2808 temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
2810 temp |= FDI_LINK_TRAIN_400MV_0DB_SNB_B;
2812 I915_WRITE(reg, temp);
2814 reg = FDI_RX_CTL(pipe);
2815 temp = I915_READ(reg);
2816 if (HAS_PCH_CPT(dev)) {
2817 temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
2818 temp |= FDI_LINK_TRAIN_PATTERN_2_CPT;
2820 temp &= ~FDI_LINK_TRAIN_NONE;
2821 temp |= FDI_LINK_TRAIN_PATTERN_2;
2823 I915_WRITE(reg, temp);
2828 for (i = 0; i < 4; i++) {
2829 reg = FDI_TX_CTL(pipe);
2830 temp = I915_READ(reg);
2831 temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
2832 temp |= snb_b_fdi_train_param[i];
2833 I915_WRITE(reg, temp);
2838 for (retry = 0; retry < 5; retry++) {
2839 reg = FDI_RX_IIR(pipe);
2840 temp = I915_READ(reg);
2841 DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
2842 if (temp & FDI_RX_SYMBOL_LOCK) {
2843 I915_WRITE(reg, temp | FDI_RX_SYMBOL_LOCK);
2844 DRM_DEBUG_KMS("FDI train 2 done.\n");
2853 DRM_ERROR("FDI train 2 fail!\n");
2855 DRM_DEBUG_KMS("FDI train done.\n");
2858 /* Manual link training for Ivy Bridge A0 parts */
2859 static void ivb_manual_fdi_link_train(struct drm_crtc *crtc)
2861 struct drm_device *dev = crtc->dev;
2862 struct drm_i915_private *dev_priv = dev->dev_private;
2863 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
2864 int pipe = intel_crtc->pipe;
2865 u32 reg, temp, i, j;
2867 /* Train 1: umask FDI RX Interrupt symbol_lock and bit_lock bit
2869 reg = FDI_RX_IMR(pipe);
2870 temp = I915_READ(reg);
2871 temp &= ~FDI_RX_SYMBOL_LOCK;
2872 temp &= ~FDI_RX_BIT_LOCK;
2873 I915_WRITE(reg, temp);
2878 DRM_DEBUG_KMS("FDI_RX_IIR before link train 0x%x\n",
2879 I915_READ(FDI_RX_IIR(pipe)));
2881 /* Try each vswing and preemphasis setting twice before moving on */
2882 for (j = 0; j < ARRAY_SIZE(snb_b_fdi_train_param) * 2; j++) {
2883 /* disable first in case we need to retry */
2884 reg = FDI_TX_CTL(pipe);
2885 temp = I915_READ(reg);
2886 temp &= ~(FDI_LINK_TRAIN_AUTO | FDI_LINK_TRAIN_NONE_IVB);
2887 temp &= ~FDI_TX_ENABLE;
2888 I915_WRITE(reg, temp);
2890 reg = FDI_RX_CTL(pipe);
2891 temp = I915_READ(reg);
2892 temp &= ~FDI_LINK_TRAIN_AUTO;
2893 temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
2894 temp &= ~FDI_RX_ENABLE;
2895 I915_WRITE(reg, temp);
2897 /* enable CPU FDI TX and PCH FDI RX */
2898 reg = FDI_TX_CTL(pipe);
2899 temp = I915_READ(reg);
2900 temp &= ~FDI_DP_PORT_WIDTH_MASK;
2901 temp |= FDI_DP_PORT_WIDTH(intel_crtc->config.fdi_lanes);
2902 temp |= FDI_LINK_TRAIN_PATTERN_1_IVB;
2903 temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
2904 temp |= snb_b_fdi_train_param[j/2];
2905 temp |= FDI_COMPOSITE_SYNC;
2906 I915_WRITE(reg, temp | FDI_TX_ENABLE);
2908 I915_WRITE(FDI_RX_MISC(pipe),
2909 FDI_RX_TP1_TO_TP2_48 | FDI_RX_FDI_DELAY_90);
2911 reg = FDI_RX_CTL(pipe);
2912 temp = I915_READ(reg);
2913 temp |= FDI_LINK_TRAIN_PATTERN_1_CPT;
2914 temp |= FDI_COMPOSITE_SYNC;
2915 I915_WRITE(reg, temp | FDI_RX_ENABLE);
2918 udelay(1); /* should be 0.5us */
2920 for (i = 0; i < 4; i++) {
2921 reg = FDI_RX_IIR(pipe);
2922 temp = I915_READ(reg);
2923 DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
2925 if (temp & FDI_RX_BIT_LOCK ||
2926 (I915_READ(reg) & FDI_RX_BIT_LOCK)) {
2927 I915_WRITE(reg, temp | FDI_RX_BIT_LOCK);
2928 DRM_DEBUG_KMS("FDI train 1 done, level %i.\n",
2932 udelay(1); /* should be 0.5us */
2935 DRM_DEBUG_KMS("FDI train 1 fail on vswing %d\n", j / 2);
2940 reg = FDI_TX_CTL(pipe);
2941 temp = I915_READ(reg);
2942 temp &= ~FDI_LINK_TRAIN_NONE_IVB;
2943 temp |= FDI_LINK_TRAIN_PATTERN_2_IVB;
2944 I915_WRITE(reg, temp);
2946 reg = FDI_RX_CTL(pipe);
2947 temp = I915_READ(reg);
2948 temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
2949 temp |= FDI_LINK_TRAIN_PATTERN_2_CPT;
2950 I915_WRITE(reg, temp);
2953 udelay(2); /* should be 1.5us */
2955 for (i = 0; i < 4; i++) {
2956 reg = FDI_RX_IIR(pipe);
2957 temp = I915_READ(reg);
2958 DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
2960 if (temp & FDI_RX_SYMBOL_LOCK ||
2961 (I915_READ(reg) & FDI_RX_SYMBOL_LOCK)) {
2962 I915_WRITE(reg, temp | FDI_RX_SYMBOL_LOCK);
2963 DRM_DEBUG_KMS("FDI train 2 done, level %i.\n",
2967 udelay(2); /* should be 1.5us */
2970 DRM_DEBUG_KMS("FDI train 2 fail on vswing %d\n", j / 2);
2974 DRM_DEBUG_KMS("FDI train done.\n");
2977 static void ironlake_fdi_pll_enable(struct intel_crtc *intel_crtc)
2979 struct drm_device *dev = intel_crtc->base.dev;
2980 struct drm_i915_private *dev_priv = dev->dev_private;
2981 int pipe = intel_crtc->pipe;
2985 /* enable PCH FDI RX PLL, wait warmup plus DMI latency */
2986 reg = FDI_RX_CTL(pipe);
2987 temp = I915_READ(reg);
2988 temp &= ~(FDI_DP_PORT_WIDTH_MASK | (0x7 << 16));
2989 temp |= FDI_DP_PORT_WIDTH(intel_crtc->config.fdi_lanes);
2990 temp |= (I915_READ(PIPECONF(pipe)) & PIPECONF_BPC_MASK) << 11;
2991 I915_WRITE(reg, temp | FDI_RX_PLL_ENABLE);
2996 /* Switch from Rawclk to PCDclk */
2997 temp = I915_READ(reg);
2998 I915_WRITE(reg, temp | FDI_PCDCLK);
3003 /* Enable CPU FDI TX PLL, always on for Ironlake */
3004 reg = FDI_TX_CTL(pipe);
3005 temp = I915_READ(reg);
3006 if ((temp & FDI_TX_PLL_ENABLE) == 0) {
3007 I915_WRITE(reg, temp | FDI_TX_PLL_ENABLE);
3014 static void ironlake_fdi_pll_disable(struct intel_crtc *intel_crtc)
3016 struct drm_device *dev = intel_crtc->base.dev;
3017 struct drm_i915_private *dev_priv = dev->dev_private;
3018 int pipe = intel_crtc->pipe;
3021 /* Switch from PCDclk to Rawclk */
3022 reg = FDI_RX_CTL(pipe);
3023 temp = I915_READ(reg);
3024 I915_WRITE(reg, temp & ~FDI_PCDCLK);
3026 /* Disable CPU FDI TX PLL */
3027 reg = FDI_TX_CTL(pipe);
3028 temp = I915_READ(reg);
3029 I915_WRITE(reg, temp & ~FDI_TX_PLL_ENABLE);
3034 reg = FDI_RX_CTL(pipe);
3035 temp = I915_READ(reg);
3036 I915_WRITE(reg, temp & ~FDI_RX_PLL_ENABLE);
3038 /* Wait for the clocks to turn off. */
3043 static void ironlake_fdi_disable(struct drm_crtc *crtc)
3045 struct drm_device *dev = crtc->dev;
3046 struct drm_i915_private *dev_priv = dev->dev_private;
3047 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3048 int pipe = intel_crtc->pipe;
3051 /* disable CPU FDI tx and PCH FDI rx */
3052 reg = FDI_TX_CTL(pipe);
3053 temp = I915_READ(reg);
3054 I915_WRITE(reg, temp & ~FDI_TX_ENABLE);
3057 reg = FDI_RX_CTL(pipe);
3058 temp = I915_READ(reg);
3059 temp &= ~(0x7 << 16);
3060 temp |= (I915_READ(PIPECONF(pipe)) & PIPECONF_BPC_MASK) << 11;
3061 I915_WRITE(reg, temp & ~FDI_RX_ENABLE);
3066 /* Ironlake workaround, disable clock pointer after downing FDI */
3067 if (HAS_PCH_IBX(dev)) {
3068 I915_WRITE(FDI_RX_CHICKEN(pipe), FDI_RX_PHASE_SYNC_POINTER_OVR);
3071 /* still set train pattern 1 */
3072 reg = FDI_TX_CTL(pipe);
3073 temp = I915_READ(reg);
3074 temp &= ~FDI_LINK_TRAIN_NONE;
3075 temp |= FDI_LINK_TRAIN_PATTERN_1;
3076 I915_WRITE(reg, temp);
3078 reg = FDI_RX_CTL(pipe);
3079 temp = I915_READ(reg);
3080 if (HAS_PCH_CPT(dev)) {
3081 temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
3082 temp |= FDI_LINK_TRAIN_PATTERN_1_CPT;
3084 temp &= ~FDI_LINK_TRAIN_NONE;
3085 temp |= FDI_LINK_TRAIN_PATTERN_1;
3087 /* BPC in FDI rx is consistent with that in PIPECONF */
3088 temp &= ~(0x07 << 16);
3089 temp |= (I915_READ(PIPECONF(pipe)) & PIPECONF_BPC_MASK) << 11;
3090 I915_WRITE(reg, temp);
3096 bool intel_has_pending_fb_unpin(struct drm_device *dev)
3098 struct intel_crtc *crtc;
3100 /* Note that we don't need to be called with mode_config.lock here
3101 * as our list of CRTC objects is static for the lifetime of the
3102 * device and so cannot disappear as we iterate. Similarly, we can
3103 * happily treat the predicates as racy, atomic checks as userspace
3104 * cannot claim and pin a new fb without at least acquring the
3105 * struct_mutex and so serialising with us.
3107 list_for_each_entry(crtc, &dev->mode_config.crtc_list, base.head) {
3108 if (atomic_read(&crtc->unpin_work_count) == 0)
3111 if (crtc->unpin_work)
3112 intel_wait_for_vblank(dev, crtc->pipe);
3120 static void intel_crtc_wait_for_pending_flips(struct drm_crtc *crtc)
3122 struct drm_device *dev = crtc->dev;
3123 struct drm_i915_private *dev_priv = dev->dev_private;
3125 if (crtc->primary->fb == NULL)
3128 WARN_ON(waitqueue_active(&dev_priv->pending_flip_queue));
3130 wait_event(dev_priv->pending_flip_queue,
3131 !intel_crtc_has_pending_flip(crtc));
3133 mutex_lock(&dev->struct_mutex);
3134 intel_finish_fb(crtc->primary->fb);
3135 mutex_unlock(&dev->struct_mutex);
3138 /* Program iCLKIP clock to the desired frequency */
3139 static void lpt_program_iclkip(struct drm_crtc *crtc)
3141 struct drm_device *dev = crtc->dev;
3142 struct drm_i915_private *dev_priv = dev->dev_private;
3143 int clock = to_intel_crtc(crtc)->config.adjusted_mode.crtc_clock;
3144 u32 divsel, phaseinc, auxdiv, phasedir = 0;
3147 mutex_lock(&dev_priv->dpio_lock);
3149 /* It is necessary to ungate the pixclk gate prior to programming
3150 * the divisors, and gate it back when it is done.
3152 I915_WRITE(PIXCLK_GATE, PIXCLK_GATE_GATE);
3154 /* Disable SSCCTL */
3155 intel_sbi_write(dev_priv, SBI_SSCCTL6,
3156 intel_sbi_read(dev_priv, SBI_SSCCTL6, SBI_ICLK) |
3160 /* 20MHz is a corner case which is out of range for the 7-bit divisor */
3161 if (clock == 20000) {
3166 /* The iCLK virtual clock root frequency is in MHz,
3167 * but the adjusted_mode->crtc_clock in in KHz. To get the
3168 * divisors, it is necessary to divide one by another, so we
3169 * convert the virtual clock precision to KHz here for higher
3172 u32 iclk_virtual_root_freq = 172800 * 1000;
3173 u32 iclk_pi_range = 64;
3174 u32 desired_divisor, msb_divisor_value, pi_value;
3176 desired_divisor = (iclk_virtual_root_freq / clock);
3177 msb_divisor_value = desired_divisor / iclk_pi_range;
3178 pi_value = desired_divisor % iclk_pi_range;
3181 divsel = msb_divisor_value - 2;
3182 phaseinc = pi_value;
3185 /* This should not happen with any sane values */
3186 WARN_ON(SBI_SSCDIVINTPHASE_DIVSEL(divsel) &
3187 ~SBI_SSCDIVINTPHASE_DIVSEL_MASK);
3188 WARN_ON(SBI_SSCDIVINTPHASE_DIR(phasedir) &
3189 ~SBI_SSCDIVINTPHASE_INCVAL_MASK);
3191 DRM_DEBUG_KMS("iCLKIP clock: found settings for %dKHz refresh rate: auxdiv=%x, divsel=%x, phasedir=%x, phaseinc=%x\n",
3198 /* Program SSCDIVINTPHASE6 */
3199 temp = intel_sbi_read(dev_priv, SBI_SSCDIVINTPHASE6, SBI_ICLK);
3200 temp &= ~SBI_SSCDIVINTPHASE_DIVSEL_MASK;
3201 temp |= SBI_SSCDIVINTPHASE_DIVSEL(divsel);
3202 temp &= ~SBI_SSCDIVINTPHASE_INCVAL_MASK;
3203 temp |= SBI_SSCDIVINTPHASE_INCVAL(phaseinc);
3204 temp |= SBI_SSCDIVINTPHASE_DIR(phasedir);
3205 temp |= SBI_SSCDIVINTPHASE_PROPAGATE;
3206 intel_sbi_write(dev_priv, SBI_SSCDIVINTPHASE6, temp, SBI_ICLK);
3208 /* Program SSCAUXDIV */
3209 temp = intel_sbi_read(dev_priv, SBI_SSCAUXDIV6, SBI_ICLK);
3210 temp &= ~SBI_SSCAUXDIV_FINALDIV2SEL(1);
3211 temp |= SBI_SSCAUXDIV_FINALDIV2SEL(auxdiv);
3212 intel_sbi_write(dev_priv, SBI_SSCAUXDIV6, temp, SBI_ICLK);
3214 /* Enable modulator and associated divider */
3215 temp = intel_sbi_read(dev_priv, SBI_SSCCTL6, SBI_ICLK);
3216 temp &= ~SBI_SSCCTL_DISABLE;
3217 intel_sbi_write(dev_priv, SBI_SSCCTL6, temp, SBI_ICLK);
3219 /* Wait for initialization time */
3222 I915_WRITE(PIXCLK_GATE, PIXCLK_GATE_UNGATE);
3224 mutex_unlock(&dev_priv->dpio_lock);
3227 static void ironlake_pch_transcoder_set_timings(struct intel_crtc *crtc,
3228 enum pipe pch_transcoder)
3230 struct drm_device *dev = crtc->base.dev;
3231 struct drm_i915_private *dev_priv = dev->dev_private;
3232 enum transcoder cpu_transcoder = crtc->config.cpu_transcoder;
3234 I915_WRITE(PCH_TRANS_HTOTAL(pch_transcoder),
3235 I915_READ(HTOTAL(cpu_transcoder)));
3236 I915_WRITE(PCH_TRANS_HBLANK(pch_transcoder),
3237 I915_READ(HBLANK(cpu_transcoder)));
3238 I915_WRITE(PCH_TRANS_HSYNC(pch_transcoder),
3239 I915_READ(HSYNC(cpu_transcoder)));
3241 I915_WRITE(PCH_TRANS_VTOTAL(pch_transcoder),
3242 I915_READ(VTOTAL(cpu_transcoder)));
3243 I915_WRITE(PCH_TRANS_VBLANK(pch_transcoder),
3244 I915_READ(VBLANK(cpu_transcoder)));
3245 I915_WRITE(PCH_TRANS_VSYNC(pch_transcoder),
3246 I915_READ(VSYNC(cpu_transcoder)));
3247 I915_WRITE(PCH_TRANS_VSYNCSHIFT(pch_transcoder),
3248 I915_READ(VSYNCSHIFT(cpu_transcoder)));
3251 static void cpt_enable_fdi_bc_bifurcation(struct drm_device *dev)
3253 struct drm_i915_private *dev_priv = dev->dev_private;
3256 temp = I915_READ(SOUTH_CHICKEN1);
3257 if (temp & FDI_BC_BIFURCATION_SELECT)
3260 WARN_ON(I915_READ(FDI_RX_CTL(PIPE_B)) & FDI_RX_ENABLE);
3261 WARN_ON(I915_READ(FDI_RX_CTL(PIPE_C)) & FDI_RX_ENABLE);
3263 temp |= FDI_BC_BIFURCATION_SELECT;
3264 DRM_DEBUG_KMS("enabling fdi C rx\n");
3265 I915_WRITE(SOUTH_CHICKEN1, temp);
3266 POSTING_READ(SOUTH_CHICKEN1);
3269 static void ivybridge_update_fdi_bc_bifurcation(struct intel_crtc *intel_crtc)
3271 struct drm_device *dev = intel_crtc->base.dev;
3272 struct drm_i915_private *dev_priv = dev->dev_private;
3274 switch (intel_crtc->pipe) {
3278 if (intel_crtc->config.fdi_lanes > 2)
3279 WARN_ON(I915_READ(SOUTH_CHICKEN1) & FDI_BC_BIFURCATION_SELECT);
3281 cpt_enable_fdi_bc_bifurcation(dev);
3285 cpt_enable_fdi_bc_bifurcation(dev);
3294 * Enable PCH resources required for PCH ports:
3296 * - FDI training & RX/TX
3297 * - update transcoder timings
3298 * - DP transcoding bits
3301 static void ironlake_pch_enable(struct drm_crtc *crtc)
3303 struct drm_device *dev = crtc->dev;
3304 struct drm_i915_private *dev_priv = dev->dev_private;
3305 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3306 int pipe = intel_crtc->pipe;
3309 assert_pch_transcoder_disabled(dev_priv, pipe);
3311 if (IS_IVYBRIDGE(dev))
3312 ivybridge_update_fdi_bc_bifurcation(intel_crtc);
3314 /* Write the TU size bits before fdi link training, so that error
3315 * detection works. */
3316 I915_WRITE(FDI_RX_TUSIZE1(pipe),
3317 I915_READ(PIPE_DATA_M1(pipe)) & TU_SIZE_MASK);
3319 /* For PCH output, training FDI link */
3320 dev_priv->display.fdi_link_train(crtc);
3322 /* We need to program the right clock selection before writing the pixel
3323 * mutliplier into the DPLL. */
3324 if (HAS_PCH_CPT(dev)) {
3327 temp = I915_READ(PCH_DPLL_SEL);
3328 temp |= TRANS_DPLL_ENABLE(pipe);
3329 sel = TRANS_DPLLB_SEL(pipe);
3330 if (intel_crtc->config.shared_dpll == DPLL_ID_PCH_PLL_B)
3334 I915_WRITE(PCH_DPLL_SEL, temp);
3337 /* XXX: pch pll's can be enabled any time before we enable the PCH
3338 * transcoder, and we actually should do this to not upset any PCH
3339 * transcoder that already use the clock when we share it.
3341 * Note that enable_shared_dpll tries to do the right thing, but
3342 * get_shared_dpll unconditionally resets the pll - we need that to have
3343 * the right LVDS enable sequence. */
3344 ironlake_enable_shared_dpll(intel_crtc);
3346 /* set transcoder timing, panel must allow it */
3347 assert_panel_unlocked(dev_priv, pipe);
3348 ironlake_pch_transcoder_set_timings(intel_crtc, pipe);
3350 intel_fdi_normal_train(crtc);
3352 /* For PCH DP, enable TRANS_DP_CTL */
3353 if (HAS_PCH_CPT(dev) &&
3354 (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT) ||
3355 intel_pipe_has_type(crtc, INTEL_OUTPUT_EDP))) {
3356 u32 bpc = (I915_READ(PIPECONF(pipe)) & PIPECONF_BPC_MASK) >> 5;
3357 reg = TRANS_DP_CTL(pipe);
3358 temp = I915_READ(reg);
3359 temp &= ~(TRANS_DP_PORT_SEL_MASK |
3360 TRANS_DP_SYNC_MASK |
3362 temp |= (TRANS_DP_OUTPUT_ENABLE |
3363 TRANS_DP_ENH_FRAMING);
3364 temp |= bpc << 9; /* same format but at 11:9 */
3366 if (crtc->mode.flags & DRM_MODE_FLAG_PHSYNC)
3367 temp |= TRANS_DP_HSYNC_ACTIVE_HIGH;
3368 if (crtc->mode.flags & DRM_MODE_FLAG_PVSYNC)
3369 temp |= TRANS_DP_VSYNC_ACTIVE_HIGH;
3371 switch (intel_trans_dp_port_sel(crtc)) {
3373 temp |= TRANS_DP_PORT_SEL_B;
3376 temp |= TRANS_DP_PORT_SEL_C;
3379 temp |= TRANS_DP_PORT_SEL_D;
3385 I915_WRITE(reg, temp);
3388 ironlake_enable_pch_transcoder(dev_priv, pipe);
3391 static void lpt_pch_enable(struct drm_crtc *crtc)
3393 struct drm_device *dev = crtc->dev;
3394 struct drm_i915_private *dev_priv = dev->dev_private;
3395 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3396 enum transcoder cpu_transcoder = intel_crtc->config.cpu_transcoder;
3398 assert_pch_transcoder_disabled(dev_priv, TRANSCODER_A);
3400 lpt_program_iclkip(crtc);
3402 /* Set transcoder timing. */
3403 ironlake_pch_transcoder_set_timings(intel_crtc, PIPE_A);
3405 lpt_enable_pch_transcoder(dev_priv, cpu_transcoder);
3408 static void intel_put_shared_dpll(struct intel_crtc *crtc)
3410 struct intel_shared_dpll *pll = intel_crtc_to_shared_dpll(crtc);
3415 if (pll->refcount == 0) {
3416 WARN(1, "bad %s refcount\n", pll->name);
3420 if (--pll->refcount == 0) {
3422 WARN_ON(pll->active);
3425 crtc->config.shared_dpll = DPLL_ID_PRIVATE;
3428 static struct intel_shared_dpll *intel_get_shared_dpll(struct intel_crtc *crtc)
3430 struct drm_i915_private *dev_priv = crtc->base.dev->dev_private;
3431 struct intel_shared_dpll *pll = intel_crtc_to_shared_dpll(crtc);
3432 enum intel_dpll_id i;
3435 DRM_DEBUG_KMS("CRTC:%d dropping existing %s\n",
3436 crtc->base.base.id, pll->name);
3437 intel_put_shared_dpll(crtc);
3440 if (HAS_PCH_IBX(dev_priv->dev)) {
3441 /* Ironlake PCH has a fixed PLL->PCH pipe mapping. */
3442 i = (enum intel_dpll_id) crtc->pipe;
3443 pll = &dev_priv->shared_dplls[i];
3445 DRM_DEBUG_KMS("CRTC:%d using pre-allocated %s\n",
3446 crtc->base.base.id, pll->name);
3451 for (i = 0; i < dev_priv->num_shared_dpll; i++) {
3452 pll = &dev_priv->shared_dplls[i];
3454 /* Only want to check enabled timings first */
3455 if (pll->refcount == 0)
3458 if (memcmp(&crtc->config.dpll_hw_state, &pll->hw_state,
3459 sizeof(pll->hw_state)) == 0) {
3460 DRM_DEBUG_KMS("CRTC:%d sharing existing %s (refcount %d, ative %d)\n",
3462 pll->name, pll->refcount, pll->active);
3468 /* Ok no matching timings, maybe there's a free one? */
3469 for (i = 0; i < dev_priv->num_shared_dpll; i++) {
3470 pll = &dev_priv->shared_dplls[i];
3471 if (pll->refcount == 0) {
3472 DRM_DEBUG_KMS("CRTC:%d allocated %s\n",
3473 crtc->base.base.id, pll->name);
3481 crtc->config.shared_dpll = i;
3482 DRM_DEBUG_DRIVER("using %s for pipe %c\n", pll->name,
3483 pipe_name(crtc->pipe));
3485 if (pll->active == 0) {
3486 memcpy(&pll->hw_state, &crtc->config.dpll_hw_state,
3487 sizeof(pll->hw_state));
3489 DRM_DEBUG_DRIVER("setting up %s\n", pll->name);
3491 assert_shared_dpll_disabled(dev_priv, pll);
3493 pll->mode_set(dev_priv, pll);
3500 static void cpt_verify_modeset(struct drm_device *dev, int pipe)
3502 struct drm_i915_private *dev_priv = dev->dev_private;
3503 int dslreg = PIPEDSL(pipe);
3506 temp = I915_READ(dslreg);
3508 if (wait_for(I915_READ(dslreg) != temp, 5)) {
3509 if (wait_for(I915_READ(dslreg) != temp, 5))
3510 DRM_ERROR("mode set failed: pipe %c stuck\n", pipe_name(pipe));
3514 static void ironlake_pfit_enable(struct intel_crtc *crtc)
3516 struct drm_device *dev = crtc->base.dev;
3517 struct drm_i915_private *dev_priv = dev->dev_private;
3518 int pipe = crtc->pipe;
3520 if (crtc->config.pch_pfit.enabled) {
3521 /* Force use of hard-coded filter coefficients
3522 * as some pre-programmed values are broken,
3525 if (IS_IVYBRIDGE(dev) || IS_HASWELL(dev))
3526 I915_WRITE(PF_CTL(pipe), PF_ENABLE | PF_FILTER_MED_3x3 |
3527 PF_PIPE_SEL_IVB(pipe));
3529 I915_WRITE(PF_CTL(pipe), PF_ENABLE | PF_FILTER_MED_3x3);
3530 I915_WRITE(PF_WIN_POS(pipe), crtc->config.pch_pfit.pos);
3531 I915_WRITE(PF_WIN_SZ(pipe), crtc->config.pch_pfit.size);
3535 static void intel_enable_planes(struct drm_crtc *crtc)
3537 struct drm_device *dev = crtc->dev;
3538 enum pipe pipe = to_intel_crtc(crtc)->pipe;
3539 struct drm_plane *plane;
3540 struct intel_plane *intel_plane;
3542 drm_for_each_legacy_plane(plane, &dev->mode_config.plane_list) {
3543 intel_plane = to_intel_plane(plane);
3544 if (intel_plane->pipe == pipe)
3545 intel_plane_restore(&intel_plane->base);
3549 static void intel_disable_planes(struct drm_crtc *crtc)
3551 struct drm_device *dev = crtc->dev;
3552 enum pipe pipe = to_intel_crtc(crtc)->pipe;
3553 struct drm_plane *plane;
3554 struct intel_plane *intel_plane;
3556 drm_for_each_legacy_plane(plane, &dev->mode_config.plane_list) {
3557 intel_plane = to_intel_plane(plane);
3558 if (intel_plane->pipe == pipe)
3559 intel_plane_disable(&intel_plane->base);
3563 void hsw_enable_ips(struct intel_crtc *crtc)
3565 struct drm_i915_private *dev_priv = crtc->base.dev->dev_private;
3567 if (!crtc->config.ips_enabled)
3570 /* We can only enable IPS after we enable a plane and wait for a vblank.
3571 * We guarantee that the plane is enabled by calling intel_enable_ips
3572 * only after intel_enable_plane. And intel_enable_plane already waits
3573 * for a vblank, so all we need to do here is to enable the IPS bit. */
3574 assert_plane_enabled(dev_priv, crtc->plane);
3575 if (IS_BROADWELL(crtc->base.dev)) {
3576 mutex_lock(&dev_priv->rps.hw_lock);
3577 WARN_ON(sandybridge_pcode_write(dev_priv, DISPLAY_IPS_CONTROL, 0xc0000000));
3578 mutex_unlock(&dev_priv->rps.hw_lock);
3579 /* Quoting Art Runyan: "its not safe to expect any particular
3580 * value in IPS_CTL bit 31 after enabling IPS through the
3581 * mailbox." Moreover, the mailbox may return a bogus state,
3582 * so we need to just enable it and continue on.
3585 I915_WRITE(IPS_CTL, IPS_ENABLE);
3586 /* The bit only becomes 1 in the next vblank, so this wait here
3587 * is essentially intel_wait_for_vblank. If we don't have this
3588 * and don't wait for vblanks until the end of crtc_enable, then
3589 * the HW state readout code will complain that the expected
3590 * IPS_CTL value is not the one we read. */
3591 if (wait_for(I915_READ_NOTRACE(IPS_CTL) & IPS_ENABLE, 50))
3592 DRM_ERROR("Timed out waiting for IPS enable\n");
3596 void hsw_disable_ips(struct intel_crtc *crtc)
3598 struct drm_device *dev = crtc->base.dev;
3599 struct drm_i915_private *dev_priv = dev->dev_private;
3601 if (!crtc->config.ips_enabled)
3604 assert_plane_enabled(dev_priv, crtc->plane);
3605 if (IS_BROADWELL(crtc->base.dev)) {
3606 mutex_lock(&dev_priv->rps.hw_lock);
3607 WARN_ON(sandybridge_pcode_write(dev_priv, DISPLAY_IPS_CONTROL, 0));
3608 mutex_unlock(&dev_priv->rps.hw_lock);
3610 I915_WRITE(IPS_CTL, 0);
3611 POSTING_READ(IPS_CTL);
3614 /* We need to wait for a vblank before we can disable the plane. */
3615 intel_wait_for_vblank(dev, crtc->pipe);
3618 /** Loads the palette/gamma unit for the CRTC with the prepared values */
3619 static void intel_crtc_load_lut(struct drm_crtc *crtc)
3621 struct drm_device *dev = crtc->dev;
3622 struct drm_i915_private *dev_priv = dev->dev_private;
3623 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3624 enum pipe pipe = intel_crtc->pipe;
3625 int palreg = PALETTE(pipe);
3627 bool reenable_ips = false;
3629 /* The clocks have to be on to load the palette. */
3630 if (!crtc->enabled || !intel_crtc->active)
3633 if (!HAS_PCH_SPLIT(dev_priv->dev)) {
3634 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DSI))
3635 assert_dsi_pll_enabled(dev_priv);
3637 assert_pll_enabled(dev_priv, pipe);
3640 /* use legacy palette for Ironlake */
3641 if (HAS_PCH_SPLIT(dev))
3642 palreg = LGC_PALETTE(pipe);
3644 /* Workaround : Do not read or write the pipe palette/gamma data while
3645 * GAMMA_MODE is configured for split gamma and IPS_CTL has IPS enabled.
3647 if (IS_HASWELL(dev) && intel_crtc->config.ips_enabled &&
3648 ((I915_READ(GAMMA_MODE(pipe)) & GAMMA_MODE_MODE_MASK) ==
3649 GAMMA_MODE_MODE_SPLIT)) {
3650 hsw_disable_ips(intel_crtc);
3651 reenable_ips = true;
3654 for (i = 0; i < 256; i++) {
3655 I915_WRITE(palreg + 4 * i,
3656 (intel_crtc->lut_r[i] << 16) |
3657 (intel_crtc->lut_g[i] << 8) |
3658 intel_crtc->lut_b[i]);
3662 hsw_enable_ips(intel_crtc);
3665 static void ironlake_crtc_enable(struct drm_crtc *crtc)
3667 struct drm_device *dev = crtc->dev;
3668 struct drm_i915_private *dev_priv = dev->dev_private;
3669 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3670 struct intel_encoder *encoder;
3671 int pipe = intel_crtc->pipe;
3672 int plane = intel_crtc->plane;
3674 WARN_ON(!crtc->enabled);
3676 if (intel_crtc->active)
3679 intel_crtc->active = true;
3681 intel_set_cpu_fifo_underrun_reporting(dev, pipe, true);
3682 intel_set_pch_fifo_underrun_reporting(dev, pipe, true);
3684 for_each_encoder_on_crtc(dev, crtc, encoder)
3685 if (encoder->pre_enable)
3686 encoder->pre_enable(encoder);
3688 if (intel_crtc->config.has_pch_encoder) {
3689 /* Note: FDI PLL enabling _must_ be done before we enable the
3690 * cpu pipes, hence this is separate from all the other fdi/pch
3692 ironlake_fdi_pll_enable(intel_crtc);
3694 assert_fdi_tx_disabled(dev_priv, pipe);
3695 assert_fdi_rx_disabled(dev_priv, pipe);
3698 ironlake_pfit_enable(intel_crtc);
3701 * On ILK+ LUT must be loaded before the pipe is running but with
3704 intel_crtc_load_lut(crtc);
3706 intel_update_watermarks(crtc);
3707 intel_enable_pipe(intel_crtc);
3708 intel_enable_primary_hw_plane(dev_priv, plane, pipe);
3709 intel_enable_planes(crtc);
3710 intel_crtc_update_cursor(crtc, true);
3712 if (intel_crtc->config.has_pch_encoder)
3713 ironlake_pch_enable(crtc);
3715 mutex_lock(&dev->struct_mutex);
3716 intel_update_fbc(dev);
3717 mutex_unlock(&dev->struct_mutex);
3719 for_each_encoder_on_crtc(dev, crtc, encoder)
3720 encoder->enable(encoder);
3722 if (HAS_PCH_CPT(dev))
3723 cpt_verify_modeset(dev, intel_crtc->pipe);
3726 * There seems to be a race in PCH platform hw (at least on some
3727 * outputs) where an enabled pipe still completes any pageflip right
3728 * away (as if the pipe is off) instead of waiting for vblank. As soon
3729 * as the first vblank happend, everything works as expected. Hence just
3730 * wait for one vblank before returning to avoid strange things
3733 intel_wait_for_vblank(dev, intel_crtc->pipe);
3736 /* IPS only exists on ULT machines and is tied to pipe A. */
3737 static bool hsw_crtc_supports_ips(struct intel_crtc *crtc)
3739 return HAS_IPS(crtc->base.dev) && crtc->pipe == PIPE_A;
3742 static void haswell_crtc_enable_planes(struct drm_crtc *crtc)
3744 struct drm_device *dev = crtc->dev;
3745 struct drm_i915_private *dev_priv = dev->dev_private;
3746 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3747 int pipe = intel_crtc->pipe;
3748 int plane = intel_crtc->plane;
3750 intel_enable_primary_hw_plane(dev_priv, plane, pipe);
3751 intel_enable_planes(crtc);
3752 intel_crtc_update_cursor(crtc, true);
3754 hsw_enable_ips(intel_crtc);
3756 mutex_lock(&dev->struct_mutex);
3757 intel_update_fbc(dev);
3758 mutex_unlock(&dev->struct_mutex);
3761 static void haswell_crtc_disable_planes(struct drm_crtc *crtc)
3763 struct drm_device *dev = crtc->dev;
3764 struct drm_i915_private *dev_priv = dev->dev_private;
3765 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3766 int pipe = intel_crtc->pipe;
3767 int plane = intel_crtc->plane;
3769 intel_crtc_wait_for_pending_flips(crtc);
3770 drm_vblank_off(dev, pipe);
3772 /* FBC must be disabled before disabling the plane on HSW. */
3773 if (dev_priv->fbc.plane == plane)
3774 intel_disable_fbc(dev);
3776 hsw_disable_ips(intel_crtc);
3778 intel_crtc_update_cursor(crtc, false);
3779 intel_disable_planes(crtc);
3780 intel_disable_primary_hw_plane(dev_priv, plane, pipe);
3784 * This implements the workaround described in the "notes" section of the mode
3785 * set sequence documentation. When going from no pipes or single pipe to
3786 * multiple pipes, and planes are enabled after the pipe, we need to wait at
3787 * least 2 vblanks on the first pipe before enabling planes on the second pipe.
3789 static void haswell_mode_set_planes_workaround(struct intel_crtc *crtc)
3791 struct drm_device *dev = crtc->base.dev;
3792 struct intel_crtc *crtc_it, *other_active_crtc = NULL;
3794 /* We want to get the other_active_crtc only if there's only 1 other
3796 list_for_each_entry(crtc_it, &dev->mode_config.crtc_list, base.head) {
3797 if (!crtc_it->active || crtc_it == crtc)
3800 if (other_active_crtc)
3803 other_active_crtc = crtc_it;
3805 if (!other_active_crtc)
3808 intel_wait_for_vblank(dev, other_active_crtc->pipe);
3809 intel_wait_for_vblank(dev, other_active_crtc->pipe);
3812 static void haswell_crtc_enable(struct drm_crtc *crtc)
3814 struct drm_device *dev = crtc->dev;
3815 struct drm_i915_private *dev_priv = dev->dev_private;
3816 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3817 struct intel_encoder *encoder;
3818 int pipe = intel_crtc->pipe;
3820 WARN_ON(!crtc->enabled);
3822 if (intel_crtc->active)
3825 intel_crtc->active = true;
3827 intel_set_cpu_fifo_underrun_reporting(dev, pipe, true);
3828 if (intel_crtc->config.has_pch_encoder)
3829 intel_set_pch_fifo_underrun_reporting(dev, TRANSCODER_A, true);
3831 if (intel_crtc->config.has_pch_encoder)
3832 dev_priv->display.fdi_link_train(crtc);
3834 for_each_encoder_on_crtc(dev, crtc, encoder)
3835 if (encoder->pre_enable)
3836 encoder->pre_enable(encoder);
3838 intel_ddi_enable_pipe_clock(intel_crtc);
3840 ironlake_pfit_enable(intel_crtc);
3843 * On ILK+ LUT must be loaded before the pipe is running but with
3846 intel_crtc_load_lut(crtc);
3848 intel_ddi_set_pipe_settings(crtc);
3849 intel_ddi_enable_transcoder_func(crtc);
3851 intel_update_watermarks(crtc);
3852 intel_enable_pipe(intel_crtc);
3854 if (intel_crtc->config.has_pch_encoder)
3855 lpt_pch_enable(crtc);
3857 for_each_encoder_on_crtc(dev, crtc, encoder) {
3858 encoder->enable(encoder);
3859 intel_opregion_notify_encoder(encoder, true);
3862 /* If we change the relative order between pipe/planes enabling, we need
3863 * to change the workaround. */
3864 haswell_mode_set_planes_workaround(intel_crtc);
3865 haswell_crtc_enable_planes(crtc);
3868 static void ironlake_pfit_disable(struct intel_crtc *crtc)
3870 struct drm_device *dev = crtc->base.dev;
3871 struct drm_i915_private *dev_priv = dev->dev_private;
3872 int pipe = crtc->pipe;
3874 /* To avoid upsetting the power well on haswell only disable the pfit if
3875 * it's in use. The hw state code will make sure we get this right. */
3876 if (crtc->config.pch_pfit.enabled) {
3877 I915_WRITE(PF_CTL(pipe), 0);
3878 I915_WRITE(PF_WIN_POS(pipe), 0);
3879 I915_WRITE(PF_WIN_SZ(pipe), 0);
3883 static void ironlake_crtc_disable(struct drm_crtc *crtc)
3885 struct drm_device *dev = crtc->dev;
3886 struct drm_i915_private *dev_priv = dev->dev_private;
3887 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3888 struct intel_encoder *encoder;
3889 int pipe = intel_crtc->pipe;
3890 int plane = intel_crtc->plane;
3894 if (!intel_crtc->active)
3897 for_each_encoder_on_crtc(dev, crtc, encoder)
3898 encoder->disable(encoder);
3900 intel_crtc_wait_for_pending_flips(crtc);
3901 drm_vblank_off(dev, pipe);
3903 if (dev_priv->fbc.plane == plane)
3904 intel_disable_fbc(dev);
3906 intel_crtc_update_cursor(crtc, false);
3907 intel_disable_planes(crtc);
3908 intel_disable_primary_hw_plane(dev_priv, plane, pipe);
3910 if (intel_crtc->config.has_pch_encoder)
3911 intel_set_pch_fifo_underrun_reporting(dev, pipe, false);
3913 intel_disable_pipe(dev_priv, pipe);
3915 ironlake_pfit_disable(intel_crtc);
3917 for_each_encoder_on_crtc(dev, crtc, encoder)
3918 if (encoder->post_disable)
3919 encoder->post_disable(encoder);
3921 if (intel_crtc->config.has_pch_encoder) {
3922 ironlake_fdi_disable(crtc);
3924 ironlake_disable_pch_transcoder(dev_priv, pipe);
3925 intel_set_pch_fifo_underrun_reporting(dev, pipe, true);
3927 if (HAS_PCH_CPT(dev)) {
3928 /* disable TRANS_DP_CTL */
3929 reg = TRANS_DP_CTL(pipe);
3930 temp = I915_READ(reg);
3931 temp &= ~(TRANS_DP_OUTPUT_ENABLE |
3932 TRANS_DP_PORT_SEL_MASK);
3933 temp |= TRANS_DP_PORT_SEL_NONE;
3934 I915_WRITE(reg, temp);
3936 /* disable DPLL_SEL */
3937 temp = I915_READ(PCH_DPLL_SEL);
3938 temp &= ~(TRANS_DPLL_ENABLE(pipe) | TRANS_DPLLB_SEL(pipe));
3939 I915_WRITE(PCH_DPLL_SEL, temp);
3942 /* disable PCH DPLL */
3943 intel_disable_shared_dpll(intel_crtc);
3945 ironlake_fdi_pll_disable(intel_crtc);
3948 intel_crtc->active = false;
3949 intel_update_watermarks(crtc);
3951 mutex_lock(&dev->struct_mutex);
3952 intel_update_fbc(dev);
3953 mutex_unlock(&dev->struct_mutex);
3956 static void haswell_crtc_disable(struct drm_crtc *crtc)
3958 struct drm_device *dev = crtc->dev;
3959 struct drm_i915_private *dev_priv = dev->dev_private;
3960 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3961 struct intel_encoder *encoder;
3962 int pipe = intel_crtc->pipe;
3963 enum transcoder cpu_transcoder = intel_crtc->config.cpu_transcoder;
3965 if (!intel_crtc->active)
3968 haswell_crtc_disable_planes(crtc);
3970 for_each_encoder_on_crtc(dev, crtc, encoder) {
3971 intel_opregion_notify_encoder(encoder, false);
3972 encoder->disable(encoder);
3975 if (intel_crtc->config.has_pch_encoder)
3976 intel_set_pch_fifo_underrun_reporting(dev, TRANSCODER_A, false);
3977 intel_disable_pipe(dev_priv, pipe);
3979 intel_ddi_disable_transcoder_func(dev_priv, cpu_transcoder);
3981 ironlake_pfit_disable(intel_crtc);
3983 intel_ddi_disable_pipe_clock(intel_crtc);
3985 for_each_encoder_on_crtc(dev, crtc, encoder)
3986 if (encoder->post_disable)
3987 encoder->post_disable(encoder);
3989 if (intel_crtc->config.has_pch_encoder) {
3990 lpt_disable_pch_transcoder(dev_priv);
3991 intel_set_pch_fifo_underrun_reporting(dev, TRANSCODER_A, true);
3992 intel_ddi_fdi_disable(crtc);
3995 intel_crtc->active = false;
3996 intel_update_watermarks(crtc);
3998 mutex_lock(&dev->struct_mutex);
3999 intel_update_fbc(dev);
4000 mutex_unlock(&dev->struct_mutex);
4003 static void ironlake_crtc_off(struct drm_crtc *crtc)
4005 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
4006 intel_put_shared_dpll(intel_crtc);
4009 static void haswell_crtc_off(struct drm_crtc *crtc)
4011 intel_ddi_put_crtc_pll(crtc);
4014 static void intel_crtc_dpms_overlay(struct intel_crtc *intel_crtc, bool enable)
4016 if (!enable && intel_crtc->overlay) {
4017 struct drm_device *dev = intel_crtc->base.dev;
4018 struct drm_i915_private *dev_priv = dev->dev_private;
4020 mutex_lock(&dev->struct_mutex);
4021 dev_priv->mm.interruptible = false;
4022 (void) intel_overlay_switch_off(intel_crtc->overlay);
4023 dev_priv->mm.interruptible = true;
4024 mutex_unlock(&dev->struct_mutex);
4027 /* Let userspace switch the overlay on again. In most cases userspace
4028 * has to recompute where to put it anyway.
4033 * i9xx_fixup_plane - ugly workaround for G45 to fire up the hardware
4034 * cursor plane briefly if not already running after enabling the display
4036 * This workaround avoids occasional blank screens when self refresh is
4040 g4x_fixup_plane(struct drm_i915_private *dev_priv, enum pipe pipe)
4042 u32 cntl = I915_READ(CURCNTR(pipe));
4044 if ((cntl & CURSOR_MODE) == 0) {
4045 u32 fw_bcl_self = I915_READ(FW_BLC_SELF);
4047 I915_WRITE(FW_BLC_SELF, fw_bcl_self & ~FW_BLC_SELF_EN);
4048 I915_WRITE(CURCNTR(pipe), CURSOR_MODE_64_ARGB_AX);
4049 intel_wait_for_vblank(dev_priv->dev, pipe);
4050 I915_WRITE(CURCNTR(pipe), cntl);
4051 I915_WRITE(CURBASE(pipe), I915_READ(CURBASE(pipe)));
4052 I915_WRITE(FW_BLC_SELF, fw_bcl_self);
4056 static void i9xx_pfit_enable(struct intel_crtc *crtc)
4058 struct drm_device *dev = crtc->base.dev;
4059 struct drm_i915_private *dev_priv = dev->dev_private;
4060 struct intel_crtc_config *pipe_config = &crtc->config;
4062 if (!crtc->config.gmch_pfit.control)
4066 * The panel fitter should only be adjusted whilst the pipe is disabled,
4067 * according to register description and PRM.
4069 WARN_ON(I915_READ(PFIT_CONTROL) & PFIT_ENABLE);
4070 assert_pipe_disabled(dev_priv, crtc->pipe);
4072 I915_WRITE(PFIT_PGM_RATIOS, pipe_config->gmch_pfit.pgm_ratios);
4073 I915_WRITE(PFIT_CONTROL, pipe_config->gmch_pfit.control);
4075 /* Border color in case we don't scale up to the full screen. Black by
4076 * default, change to something else for debugging. */
4077 I915_WRITE(BCLRPAT(crtc->pipe), 0);
4080 #define for_each_power_domain(domain, mask) \
4081 for ((domain) = 0; (domain) < POWER_DOMAIN_NUM; (domain)++) \
4082 if ((1 << (domain)) & (mask))
4084 enum intel_display_power_domain
4085 intel_display_port_power_domain(struct intel_encoder *intel_encoder)
4087 struct drm_device *dev = intel_encoder->base.dev;
4088 struct intel_digital_port *intel_dig_port;
4090 switch (intel_encoder->type) {
4091 case INTEL_OUTPUT_UNKNOWN:
4092 /* Only DDI platforms should ever use this output type */
4093 WARN_ON_ONCE(!HAS_DDI(dev));
4094 case INTEL_OUTPUT_DISPLAYPORT:
4095 case INTEL_OUTPUT_HDMI:
4096 case INTEL_OUTPUT_EDP:
4097 intel_dig_port = enc_to_dig_port(&intel_encoder->base);
4098 switch (intel_dig_port->port) {
4100 return POWER_DOMAIN_PORT_DDI_A_4_LANES;
4102 return POWER_DOMAIN_PORT_DDI_B_4_LANES;
4104 return POWER_DOMAIN_PORT_DDI_C_4_LANES;
4106 return POWER_DOMAIN_PORT_DDI_D_4_LANES;
4109 return POWER_DOMAIN_PORT_OTHER;
4111 case INTEL_OUTPUT_ANALOG:
4112 return POWER_DOMAIN_PORT_CRT;
4113 case INTEL_OUTPUT_DSI:
4114 return POWER_DOMAIN_PORT_DSI;
4116 return POWER_DOMAIN_PORT_OTHER;
4120 static unsigned long get_crtc_power_domains(struct drm_crtc *crtc)
4122 struct drm_device *dev = crtc->dev;
4123 struct intel_encoder *intel_encoder;
4124 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
4125 enum pipe pipe = intel_crtc->pipe;
4126 bool pfit_enabled = intel_crtc->config.pch_pfit.enabled;
4128 enum transcoder transcoder;
4130 transcoder = intel_pipe_to_cpu_transcoder(dev->dev_private, pipe);
4132 mask = BIT(POWER_DOMAIN_PIPE(pipe));
4133 mask |= BIT(POWER_DOMAIN_TRANSCODER(transcoder));
4135 mask |= BIT(POWER_DOMAIN_PIPE_PANEL_FITTER(pipe));
4137 for_each_encoder_on_crtc(dev, crtc, intel_encoder)
4138 mask |= BIT(intel_display_port_power_domain(intel_encoder));
4143 void intel_display_set_init_power(struct drm_i915_private *dev_priv,
4146 if (dev_priv->power_domains.init_power_on == enable)
4150 intel_display_power_get(dev_priv, POWER_DOMAIN_INIT);
4152 intel_display_power_put(dev_priv, POWER_DOMAIN_INIT);
4154 dev_priv->power_domains.init_power_on = enable;
4157 static void modeset_update_crtc_power_domains(struct drm_device *dev)
4159 struct drm_i915_private *dev_priv = dev->dev_private;
4160 unsigned long pipe_domains[I915_MAX_PIPES] = { 0, };
4161 struct intel_crtc *crtc;
4164 * First get all needed power domains, then put all unneeded, to avoid
4165 * any unnecessary toggling of the power wells.
4167 list_for_each_entry(crtc, &dev->mode_config.crtc_list, base.head) {
4168 enum intel_display_power_domain domain;
4170 if (!crtc->base.enabled)
4173 pipe_domains[crtc->pipe] = get_crtc_power_domains(&crtc->base);
4175 for_each_power_domain(domain, pipe_domains[crtc->pipe])
4176 intel_display_power_get(dev_priv, domain);
4179 list_for_each_entry(crtc, &dev->mode_config.crtc_list, base.head) {
4180 enum intel_display_power_domain domain;
4182 for_each_power_domain(domain, crtc->enabled_power_domains)
4183 intel_display_power_put(dev_priv, domain);
4185 crtc->enabled_power_domains = pipe_domains[crtc->pipe];
4188 intel_display_set_init_power(dev_priv, false);
4191 int valleyview_get_vco(struct drm_i915_private *dev_priv)
4193 int hpll_freq, vco_freq[] = { 800, 1600, 2000, 2400 };
4195 /* Obtain SKU information */
4196 mutex_lock(&dev_priv->dpio_lock);
4197 hpll_freq = vlv_cck_read(dev_priv, CCK_FUSE_REG) &
4198 CCK_FUSE_HPLL_FREQ_MASK;
4199 mutex_unlock(&dev_priv->dpio_lock);
4201 return vco_freq[hpll_freq];
4204 /* Adjust CDclk dividers to allow high res or save power if possible */
4205 static void valleyview_set_cdclk(struct drm_device *dev, int cdclk)
4207 struct drm_i915_private *dev_priv = dev->dev_private;
4210 if (cdclk >= 320) /* jump to highest voltage for 400MHz too */
4212 else if (cdclk == 266)
4217 mutex_lock(&dev_priv->rps.hw_lock);
4218 val = vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ);
4219 val &= ~DSPFREQGUAR_MASK;
4220 val |= (cmd << DSPFREQGUAR_SHIFT);
4221 vlv_punit_write(dev_priv, PUNIT_REG_DSPFREQ, val);
4222 if (wait_for((vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ) &
4223 DSPFREQSTAT_MASK) == (cmd << DSPFREQSTAT_SHIFT),
4225 DRM_ERROR("timed out waiting for CDclk change\n");
4227 mutex_unlock(&dev_priv->rps.hw_lock);
4232 vco = valleyview_get_vco(dev_priv);
4233 divider = ((vco << 1) / cdclk) - 1;
4235 mutex_lock(&dev_priv->dpio_lock);
4236 /* adjust cdclk divider */
4237 val = vlv_cck_read(dev_priv, CCK_DISPLAY_CLOCK_CONTROL);
4240 vlv_cck_write(dev_priv, CCK_DISPLAY_CLOCK_CONTROL, val);
4241 mutex_unlock(&dev_priv->dpio_lock);
4244 mutex_lock(&dev_priv->dpio_lock);
4245 /* adjust self-refresh exit latency value */
4246 val = vlv_bunit_read(dev_priv, BUNIT_REG_BISOC);
4250 * For high bandwidth configs, we set a higher latency in the bunit
4251 * so that the core display fetch happens in time to avoid underruns.
4254 val |= 4500 / 250; /* 4.5 usec */
4256 val |= 3000 / 250; /* 3.0 usec */
4257 vlv_bunit_write(dev_priv, BUNIT_REG_BISOC, val);
4258 mutex_unlock(&dev_priv->dpio_lock);
4260 /* Since we changed the CDclk, we need to update the GMBUSFREQ too */
4261 intel_i2c_reset(dev);
4264 static int valleyview_cur_cdclk(struct drm_i915_private *dev_priv)
4269 vco = valleyview_get_vco(dev_priv);
4271 mutex_lock(&dev_priv->dpio_lock);
4272 divider = vlv_cck_read(dev_priv, CCK_DISPLAY_CLOCK_CONTROL);
4273 mutex_unlock(&dev_priv->dpio_lock);
4277 cur_cdclk = (vco << 1) / (divider + 1);
4282 static int valleyview_calc_cdclk(struct drm_i915_private *dev_priv,
4287 cur_cdclk = valleyview_cur_cdclk(dev_priv);
4290 * Really only a few cases to deal with, as only 4 CDclks are supported:
4295 * So we check to see whether we're above 90% of the lower bin and
4298 if (max_pixclk > 288000) {
4300 } else if (max_pixclk > 240000) {
4304 /* Looks like the 200MHz CDclk freq doesn't work on some configs */
4307 /* compute the max pixel clock for new configuration */
4308 static int intel_mode_max_pixclk(struct drm_i915_private *dev_priv)
4310 struct drm_device *dev = dev_priv->dev;
4311 struct intel_crtc *intel_crtc;
4314 list_for_each_entry(intel_crtc, &dev->mode_config.crtc_list,
4316 if (intel_crtc->new_enabled)
4317 max_pixclk = max(max_pixclk,
4318 intel_crtc->new_config->adjusted_mode.crtc_clock);
4324 static void valleyview_modeset_global_pipes(struct drm_device *dev,
4325 unsigned *prepare_pipes)
4327 struct drm_i915_private *dev_priv = dev->dev_private;
4328 struct intel_crtc *intel_crtc;
4329 int max_pixclk = intel_mode_max_pixclk(dev_priv);
4330 int cur_cdclk = valleyview_cur_cdclk(dev_priv);
4332 if (valleyview_calc_cdclk(dev_priv, max_pixclk) == cur_cdclk)
4335 /* disable/enable all currently active pipes while we change cdclk */
4336 list_for_each_entry(intel_crtc, &dev->mode_config.crtc_list,
4338 if (intel_crtc->base.enabled)
4339 *prepare_pipes |= (1 << intel_crtc->pipe);
4342 static void valleyview_modeset_global_resources(struct drm_device *dev)
4344 struct drm_i915_private *dev_priv = dev->dev_private;
4345 int max_pixclk = intel_mode_max_pixclk(dev_priv);
4346 int cur_cdclk = valleyview_cur_cdclk(dev_priv);
4347 int req_cdclk = valleyview_calc_cdclk(dev_priv, max_pixclk);
4349 if (req_cdclk != cur_cdclk)
4350 valleyview_set_cdclk(dev, req_cdclk);
4351 modeset_update_crtc_power_domains(dev);
4354 static void valleyview_crtc_enable(struct drm_crtc *crtc)
4356 struct drm_device *dev = crtc->dev;
4357 struct drm_i915_private *dev_priv = dev->dev_private;
4358 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
4359 struct intel_encoder *encoder;
4360 int pipe = intel_crtc->pipe;
4361 int plane = intel_crtc->plane;
4364 WARN_ON(!crtc->enabled);
4366 if (intel_crtc->active)
4369 intel_crtc->active = true;
4371 for_each_encoder_on_crtc(dev, crtc, encoder)
4372 if (encoder->pre_pll_enable)
4373 encoder->pre_pll_enable(encoder);
4375 is_dsi = intel_pipe_has_type(crtc, INTEL_OUTPUT_DSI);
4378 vlv_enable_pll(intel_crtc);
4380 for_each_encoder_on_crtc(dev, crtc, encoder)
4381 if (encoder->pre_enable)
4382 encoder->pre_enable(encoder);
4384 i9xx_pfit_enable(intel_crtc);
4386 intel_crtc_load_lut(crtc);
4388 intel_update_watermarks(crtc);
4389 intel_enable_pipe(intel_crtc);
4390 intel_set_cpu_fifo_underrun_reporting(dev, pipe, true);
4391 intel_enable_primary_hw_plane(dev_priv, plane, pipe);
4392 intel_enable_planes(crtc);
4393 intel_crtc_update_cursor(crtc, true);
4395 intel_update_fbc(dev);
4397 for_each_encoder_on_crtc(dev, crtc, encoder)
4398 encoder->enable(encoder);
4401 static void i9xx_crtc_enable(struct drm_crtc *crtc)
4403 struct drm_device *dev = crtc->dev;
4404 struct drm_i915_private *dev_priv = dev->dev_private;
4405 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
4406 struct intel_encoder *encoder;
4407 int pipe = intel_crtc->pipe;
4408 int plane = intel_crtc->plane;
4410 WARN_ON(!crtc->enabled);
4412 if (intel_crtc->active)
4415 intel_crtc->active = true;
4417 for_each_encoder_on_crtc(dev, crtc, encoder)
4418 if (encoder->pre_enable)
4419 encoder->pre_enable(encoder);
4421 i9xx_enable_pll(intel_crtc);
4423 i9xx_pfit_enable(intel_crtc);
4425 intel_crtc_load_lut(crtc);
4427 intel_update_watermarks(crtc);
4428 intel_enable_pipe(intel_crtc);
4429 intel_set_cpu_fifo_underrun_reporting(dev, pipe, true);
4430 intel_enable_primary_hw_plane(dev_priv, plane, pipe);
4431 intel_enable_planes(crtc);
4432 /* The fixup needs to happen before cursor is enabled */
4434 g4x_fixup_plane(dev_priv, pipe);
4435 intel_crtc_update_cursor(crtc, true);
4437 /* Give the overlay scaler a chance to enable if it's on this pipe */
4438 intel_crtc_dpms_overlay(intel_crtc, true);
4440 intel_update_fbc(dev);
4442 for_each_encoder_on_crtc(dev, crtc, encoder)
4443 encoder->enable(encoder);
4446 static void i9xx_pfit_disable(struct intel_crtc *crtc)
4448 struct drm_device *dev = crtc->base.dev;
4449 struct drm_i915_private *dev_priv = dev->dev_private;
4451 if (!crtc->config.gmch_pfit.control)
4454 assert_pipe_disabled(dev_priv, crtc->pipe);
4456 DRM_DEBUG_DRIVER("disabling pfit, current: 0x%08x\n",
4457 I915_READ(PFIT_CONTROL));
4458 I915_WRITE(PFIT_CONTROL, 0);
4461 static void i9xx_crtc_disable(struct drm_crtc *crtc)
4463 struct drm_device *dev = crtc->dev;
4464 struct drm_i915_private *dev_priv = dev->dev_private;
4465 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
4466 struct intel_encoder *encoder;
4467 int pipe = intel_crtc->pipe;
4468 int plane = intel_crtc->plane;
4470 if (!intel_crtc->active)
4473 for_each_encoder_on_crtc(dev, crtc, encoder)
4474 encoder->disable(encoder);
4476 /* Give the overlay scaler a chance to disable if it's on this pipe */
4477 intel_crtc_wait_for_pending_flips(crtc);
4478 drm_vblank_off(dev, pipe);
4480 if (dev_priv->fbc.plane == plane)
4481 intel_disable_fbc(dev);
4483 intel_crtc_dpms_overlay(intel_crtc, false);
4484 intel_crtc_update_cursor(crtc, false);
4485 intel_disable_planes(crtc);
4486 intel_disable_primary_hw_plane(dev_priv, plane, pipe);
4488 intel_set_cpu_fifo_underrun_reporting(dev, pipe, false);
4489 intel_disable_pipe(dev_priv, pipe);
4491 i9xx_pfit_disable(intel_crtc);
4493 for_each_encoder_on_crtc(dev, crtc, encoder)
4494 if (encoder->post_disable)
4495 encoder->post_disable(encoder);
4497 if (IS_VALLEYVIEW(dev) && !intel_pipe_has_type(crtc, INTEL_OUTPUT_DSI))
4498 vlv_disable_pll(dev_priv, pipe);
4499 else if (!IS_VALLEYVIEW(dev))
4500 i9xx_disable_pll(dev_priv, pipe);
4502 intel_crtc->active = false;
4503 intel_update_watermarks(crtc);
4505 intel_update_fbc(dev);
4508 static void i9xx_crtc_off(struct drm_crtc *crtc)
4512 static void intel_crtc_update_sarea(struct drm_crtc *crtc,
4515 struct drm_device *dev = crtc->dev;
4516 struct drm_i915_master_private *master_priv;
4517 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
4518 int pipe = intel_crtc->pipe;
4520 if (!dev->primary->master)
4523 master_priv = dev->primary->master->driver_priv;
4524 if (!master_priv->sarea_priv)
4529 master_priv->sarea_priv->pipeA_w = enabled ? crtc->mode.hdisplay : 0;
4530 master_priv->sarea_priv->pipeA_h = enabled ? crtc->mode.vdisplay : 0;
4533 master_priv->sarea_priv->pipeB_w = enabled ? crtc->mode.hdisplay : 0;
4534 master_priv->sarea_priv->pipeB_h = enabled ? crtc->mode.vdisplay : 0;
4537 DRM_ERROR("Can't update pipe %c in SAREA\n", pipe_name(pipe));
4543 * Sets the power management mode of the pipe and plane.
4545 void intel_crtc_update_dpms(struct drm_crtc *crtc)
4547 struct drm_device *dev = crtc->dev;
4548 struct drm_i915_private *dev_priv = dev->dev_private;
4549 struct intel_encoder *intel_encoder;
4550 bool enable = false;
4552 for_each_encoder_on_crtc(dev, crtc, intel_encoder)
4553 enable |= intel_encoder->connectors_active;
4556 dev_priv->display.crtc_enable(crtc);
4558 dev_priv->display.crtc_disable(crtc);
4560 intel_crtc_update_sarea(crtc, enable);
4563 static void intel_crtc_disable(struct drm_crtc *crtc)
4565 struct drm_device *dev = crtc->dev;
4566 struct drm_connector *connector;
4567 struct drm_i915_private *dev_priv = dev->dev_private;
4568 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
4570 /* crtc should still be enabled when we disable it. */
4571 WARN_ON(!crtc->enabled);
4573 dev_priv->display.crtc_disable(crtc);
4574 intel_crtc->eld_vld = false;
4575 intel_crtc_update_sarea(crtc, false);
4576 dev_priv->display.off(crtc);
4578 assert_plane_disabled(dev->dev_private, to_intel_crtc(crtc)->plane);
4579 assert_cursor_disabled(dev_priv, to_intel_crtc(crtc)->pipe);
4580 assert_pipe_disabled(dev->dev_private, to_intel_crtc(crtc)->pipe);
4582 if (crtc->primary->fb) {
4583 mutex_lock(&dev->struct_mutex);
4584 intel_unpin_fb_obj(to_intel_framebuffer(crtc->primary->fb)->obj);
4585 mutex_unlock(&dev->struct_mutex);
4586 crtc->primary->fb = NULL;
4589 /* Update computed state. */
4590 list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
4591 if (!connector->encoder || !connector->encoder->crtc)
4594 if (connector->encoder->crtc != crtc)
4597 connector->dpms = DRM_MODE_DPMS_OFF;
4598 to_intel_encoder(connector->encoder)->connectors_active = false;
4602 void intel_encoder_destroy(struct drm_encoder *encoder)
4604 struct intel_encoder *intel_encoder = to_intel_encoder(encoder);
4606 drm_encoder_cleanup(encoder);
4607 kfree(intel_encoder);
4610 /* Simple dpms helper for encoders with just one connector, no cloning and only
4611 * one kind of off state. It clamps all !ON modes to fully OFF and changes the
4612 * state of the entire output pipe. */
4613 static void intel_encoder_dpms(struct intel_encoder *encoder, int mode)
4615 if (mode == DRM_MODE_DPMS_ON) {
4616 encoder->connectors_active = true;
4618 intel_crtc_update_dpms(encoder->base.crtc);
4620 encoder->connectors_active = false;
4622 intel_crtc_update_dpms(encoder->base.crtc);
4626 /* Cross check the actual hw state with our own modeset state tracking (and it's
4627 * internal consistency). */
4628 static void intel_connector_check_state(struct intel_connector *connector)
4630 if (connector->get_hw_state(connector)) {
4631 struct intel_encoder *encoder = connector->encoder;
4632 struct drm_crtc *crtc;
4633 bool encoder_enabled;
4636 DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n",
4637 connector->base.base.id,
4638 drm_get_connector_name(&connector->base));
4640 WARN(connector->base.dpms == DRM_MODE_DPMS_OFF,
4641 "wrong connector dpms state\n");
4642 WARN(connector->base.encoder != &encoder->base,
4643 "active connector not linked to encoder\n");
4644 WARN(!encoder->connectors_active,
4645 "encoder->connectors_active not set\n");
4647 encoder_enabled = encoder->get_hw_state(encoder, &pipe);
4648 WARN(!encoder_enabled, "encoder not enabled\n");
4649 if (WARN_ON(!encoder->base.crtc))
4652 crtc = encoder->base.crtc;
4654 WARN(!crtc->enabled, "crtc not enabled\n");
4655 WARN(!to_intel_crtc(crtc)->active, "crtc not active\n");
4656 WARN(pipe != to_intel_crtc(crtc)->pipe,
4657 "encoder active on the wrong pipe\n");
4661 /* Even simpler default implementation, if there's really no special case to
4663 void intel_connector_dpms(struct drm_connector *connector, int mode)
4665 /* All the simple cases only support two dpms states. */
4666 if (mode != DRM_MODE_DPMS_ON)
4667 mode = DRM_MODE_DPMS_OFF;
4669 if (mode == connector->dpms)
4672 connector->dpms = mode;
4674 /* Only need to change hw state when actually enabled */
4675 if (connector->encoder)
4676 intel_encoder_dpms(to_intel_encoder(connector->encoder), mode);
4678 intel_modeset_check_state(connector->dev);
4681 /* Simple connector->get_hw_state implementation for encoders that support only
4682 * one connector and no cloning and hence the encoder state determines the state
4683 * of the connector. */
4684 bool intel_connector_get_hw_state(struct intel_connector *connector)
4687 struct intel_encoder *encoder = connector->encoder;
4689 return encoder->get_hw_state(encoder, &pipe);
4692 static bool ironlake_check_fdi_lanes(struct drm_device *dev, enum pipe pipe,
4693 struct intel_crtc_config *pipe_config)
4695 struct drm_i915_private *dev_priv = dev->dev_private;
4696 struct intel_crtc *pipe_B_crtc =
4697 to_intel_crtc(dev_priv->pipe_to_crtc_mapping[PIPE_B]);
4699 DRM_DEBUG_KMS("checking fdi config on pipe %c, lanes %i\n",
4700 pipe_name(pipe), pipe_config->fdi_lanes);
4701 if (pipe_config->fdi_lanes > 4) {
4702 DRM_DEBUG_KMS("invalid fdi lane config on pipe %c: %i lanes\n",
4703 pipe_name(pipe), pipe_config->fdi_lanes);
4707 if (IS_HASWELL(dev) || IS_BROADWELL(dev)) {
4708 if (pipe_config->fdi_lanes > 2) {
4709 DRM_DEBUG_KMS("only 2 lanes on haswell, required: %i lanes\n",
4710 pipe_config->fdi_lanes);
4717 if (INTEL_INFO(dev)->num_pipes == 2)
4720 /* Ivybridge 3 pipe is really complicated */
4725 if (dev_priv->pipe_to_crtc_mapping[PIPE_C]->enabled &&
4726 pipe_config->fdi_lanes > 2) {
4727 DRM_DEBUG_KMS("invalid shared fdi lane config on pipe %c: %i lanes\n",
4728 pipe_name(pipe), pipe_config->fdi_lanes);
4733 if (!pipe_has_enabled_pch(pipe_B_crtc) ||
4734 pipe_B_crtc->config.fdi_lanes <= 2) {
4735 if (pipe_config->fdi_lanes > 2) {
4736 DRM_DEBUG_KMS("invalid shared fdi lane config on pipe %c: %i lanes\n",
4737 pipe_name(pipe), pipe_config->fdi_lanes);
4741 DRM_DEBUG_KMS("fdi link B uses too many lanes to enable link C\n");
4751 static int ironlake_fdi_compute_config(struct intel_crtc *intel_crtc,
4752 struct intel_crtc_config *pipe_config)
4754 struct drm_device *dev = intel_crtc->base.dev;
4755 struct drm_display_mode *adjusted_mode = &pipe_config->adjusted_mode;
4756 int lane, link_bw, fdi_dotclock;
4757 bool setup_ok, needs_recompute = false;
4760 /* FDI is a binary signal running at ~2.7GHz, encoding
4761 * each output octet as 10 bits. The actual frequency
4762 * is stored as a divider into a 100MHz clock, and the
4763 * mode pixel clock is stored in units of 1KHz.
4764 * Hence the bw of each lane in terms of the mode signal
4767 link_bw = intel_fdi_link_freq(dev) * MHz(100)/KHz(1)/10;
4769 fdi_dotclock = adjusted_mode->crtc_clock;
4771 lane = ironlake_get_lanes_required(fdi_dotclock, link_bw,
4772 pipe_config->pipe_bpp);
4774 pipe_config->fdi_lanes = lane;
4776 intel_link_compute_m_n(pipe_config->pipe_bpp, lane, fdi_dotclock,
4777 link_bw, &pipe_config->fdi_m_n);
4779 setup_ok = ironlake_check_fdi_lanes(intel_crtc->base.dev,
4780 intel_crtc->pipe, pipe_config);
4781 if (!setup_ok && pipe_config->pipe_bpp > 6*3) {
4782 pipe_config->pipe_bpp -= 2*3;
4783 DRM_DEBUG_KMS("fdi link bw constraint, reducing pipe bpp to %i\n",
4784 pipe_config->pipe_bpp);
4785 needs_recompute = true;
4786 pipe_config->bw_constrained = true;
4791 if (needs_recompute)
4794 return setup_ok ? 0 : -EINVAL;
4797 static void hsw_compute_ips_config(struct intel_crtc *crtc,
4798 struct intel_crtc_config *pipe_config)
4800 pipe_config->ips_enabled = i915.enable_ips &&
4801 hsw_crtc_supports_ips(crtc) &&
4802 pipe_config->pipe_bpp <= 24;
4805 static int intel_crtc_compute_config(struct intel_crtc *crtc,
4806 struct intel_crtc_config *pipe_config)
4808 struct drm_device *dev = crtc->base.dev;
4809 struct drm_display_mode *adjusted_mode = &pipe_config->adjusted_mode;
4811 /* FIXME should check pixel clock limits on all platforms */
4812 if (INTEL_INFO(dev)->gen < 4) {
4813 struct drm_i915_private *dev_priv = dev->dev_private;
4815 dev_priv->display.get_display_clock_speed(dev);
4818 * Enable pixel doubling when the dot clock
4819 * is > 90% of the (display) core speed.
4821 * GDG double wide on either pipe,
4822 * otherwise pipe A only.
4824 if ((crtc->pipe == PIPE_A || IS_I915G(dev)) &&
4825 adjusted_mode->crtc_clock > clock_limit * 9 / 10) {
4827 pipe_config->double_wide = true;
4830 if (adjusted_mode->crtc_clock > clock_limit * 9 / 10)
4835 * Pipe horizontal size must be even in:
4837 * - LVDS dual channel mode
4838 * - Double wide pipe
4840 if ((intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_LVDS) &&
4841 intel_is_dual_link_lvds(dev)) || pipe_config->double_wide)
4842 pipe_config->pipe_src_w &= ~1;
4844 /* Cantiga+ cannot handle modes with a hsync front porch of 0.
4845 * WaPruneModeWithIncorrectHsyncOffset:ctg,elk,ilk,snb,ivb,vlv,hsw.
4847 if ((INTEL_INFO(dev)->gen > 4 || IS_G4X(dev)) &&
4848 adjusted_mode->hsync_start == adjusted_mode->hdisplay)
4851 if ((IS_G4X(dev) || IS_VALLEYVIEW(dev)) && pipe_config->pipe_bpp > 10*3) {
4852 pipe_config->pipe_bpp = 10*3; /* 12bpc is gen5+ */
4853 } else if (INTEL_INFO(dev)->gen <= 4 && pipe_config->pipe_bpp > 8*3) {
4854 /* only a 8bpc pipe, with 6bpc dither through the panel fitter
4856 pipe_config->pipe_bpp = 8*3;
4860 hsw_compute_ips_config(crtc, pipe_config);
4862 /* XXX: PCH clock sharing is done in ->mode_set, so make sure the old
4863 * clock survives for now. */
4864 if (HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev))
4865 pipe_config->shared_dpll = crtc->config.shared_dpll;
4867 if (pipe_config->has_pch_encoder)
4868 return ironlake_fdi_compute_config(crtc, pipe_config);
4873 static int valleyview_get_display_clock_speed(struct drm_device *dev)
4875 return 400000; /* FIXME */
4878 static int i945_get_display_clock_speed(struct drm_device *dev)
4883 static int i915_get_display_clock_speed(struct drm_device *dev)
4888 static int i9xx_misc_get_display_clock_speed(struct drm_device *dev)
4893 static int pnv_get_display_clock_speed(struct drm_device *dev)
4897 pci_read_config_word(dev->pdev, GCFGC, &gcfgc);
4899 switch (gcfgc & GC_DISPLAY_CLOCK_MASK) {
4900 case GC_DISPLAY_CLOCK_267_MHZ_PNV:
4902 case GC_DISPLAY_CLOCK_333_MHZ_PNV:
4904 case GC_DISPLAY_CLOCK_444_MHZ_PNV:
4906 case GC_DISPLAY_CLOCK_200_MHZ_PNV:
4909 DRM_ERROR("Unknown pnv display core clock 0x%04x\n", gcfgc);
4910 case GC_DISPLAY_CLOCK_133_MHZ_PNV:
4912 case GC_DISPLAY_CLOCK_167_MHZ_PNV:
4917 static int i915gm_get_display_clock_speed(struct drm_device *dev)
4921 pci_read_config_word(dev->pdev, GCFGC, &gcfgc);
4923 if (gcfgc & GC_LOW_FREQUENCY_ENABLE)
4926 switch (gcfgc & GC_DISPLAY_CLOCK_MASK) {
4927 case GC_DISPLAY_CLOCK_333_MHZ:
4930 case GC_DISPLAY_CLOCK_190_200_MHZ:
4936 static int i865_get_display_clock_speed(struct drm_device *dev)
4941 static int i855_get_display_clock_speed(struct drm_device *dev)
4944 /* Assume that the hardware is in the high speed state. This
4945 * should be the default.
4947 switch (hpllcc & GC_CLOCK_CONTROL_MASK) {
4948 case GC_CLOCK_133_200:
4949 case GC_CLOCK_100_200:
4951 case GC_CLOCK_166_250:
4953 case GC_CLOCK_100_133:
4957 /* Shouldn't happen */
4961 static int i830_get_display_clock_speed(struct drm_device *dev)
4967 intel_reduce_m_n_ratio(uint32_t *num, uint32_t *den)
4969 while (*num > DATA_LINK_M_N_MASK ||
4970 *den > DATA_LINK_M_N_MASK) {
4976 static void compute_m_n(unsigned int m, unsigned int n,
4977 uint32_t *ret_m, uint32_t *ret_n)
4979 *ret_n = min_t(unsigned int, roundup_pow_of_two(n), DATA_LINK_N_MAX);
4980 *ret_m = div_u64((uint64_t) m * *ret_n, n);
4981 intel_reduce_m_n_ratio(ret_m, ret_n);
4985 intel_link_compute_m_n(int bits_per_pixel, int nlanes,
4986 int pixel_clock, int link_clock,
4987 struct intel_link_m_n *m_n)
4991 compute_m_n(bits_per_pixel * pixel_clock,
4992 link_clock * nlanes * 8,
4993 &m_n->gmch_m, &m_n->gmch_n);
4995 compute_m_n(pixel_clock, link_clock,
4996 &m_n->link_m, &m_n->link_n);
4999 static inline bool intel_panel_use_ssc(struct drm_i915_private *dev_priv)
5001 if (i915.panel_use_ssc >= 0)
5002 return i915.panel_use_ssc != 0;
5003 return dev_priv->vbt.lvds_use_ssc
5004 && !(dev_priv->quirks & QUIRK_LVDS_SSC_DISABLE);
5007 static int i9xx_get_refclk(struct drm_crtc *crtc, int num_connectors)
5009 struct drm_device *dev = crtc->dev;
5010 struct drm_i915_private *dev_priv = dev->dev_private;
5013 if (IS_VALLEYVIEW(dev)) {
5015 } else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) &&
5016 intel_panel_use_ssc(dev_priv) && num_connectors < 2) {
5017 refclk = dev_priv->vbt.lvds_ssc_freq;
5018 DRM_DEBUG_KMS("using SSC reference clock of %d kHz\n", refclk);
5019 } else if (!IS_GEN2(dev)) {
5028 static uint32_t pnv_dpll_compute_fp(struct dpll *dpll)
5030 return (1 << dpll->n) << 16 | dpll->m2;
5033 static uint32_t i9xx_dpll_compute_fp(struct dpll *dpll)
5035 return dpll->n << 16 | dpll->m1 << 8 | dpll->m2;
5038 static void i9xx_update_pll_dividers(struct intel_crtc *crtc,
5039 intel_clock_t *reduced_clock)
5041 struct drm_device *dev = crtc->base.dev;
5042 struct drm_i915_private *dev_priv = dev->dev_private;
5043 int pipe = crtc->pipe;
5046 if (IS_PINEVIEW(dev)) {
5047 fp = pnv_dpll_compute_fp(&crtc->config.dpll);
5049 fp2 = pnv_dpll_compute_fp(reduced_clock);
5051 fp = i9xx_dpll_compute_fp(&crtc->config.dpll);
5053 fp2 = i9xx_dpll_compute_fp(reduced_clock);
5056 I915_WRITE(FP0(pipe), fp);
5057 crtc->config.dpll_hw_state.fp0 = fp;
5059 crtc->lowfreq_avail = false;
5060 if (intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_LVDS) &&
5061 reduced_clock && i915.powersave) {
5062 I915_WRITE(FP1(pipe), fp2);
5063 crtc->config.dpll_hw_state.fp1 = fp2;
5064 crtc->lowfreq_avail = true;
5066 I915_WRITE(FP1(pipe), fp);
5067 crtc->config.dpll_hw_state.fp1 = fp;
5071 static void vlv_pllb_recal_opamp(struct drm_i915_private *dev_priv, enum pipe
5077 * PLLB opamp always calibrates to max value of 0x3f, force enable it
5078 * and set it to a reasonable value instead.
5080 reg_val = vlv_dpio_read(dev_priv, pipe, VLV_PLL_DW9(1));
5081 reg_val &= 0xffffff00;
5082 reg_val |= 0x00000030;
5083 vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW9(1), reg_val);
5085 reg_val = vlv_dpio_read(dev_priv, pipe, VLV_REF_DW13);
5086 reg_val &= 0x8cffffff;
5087 reg_val = 0x8c000000;
5088 vlv_dpio_write(dev_priv, pipe, VLV_REF_DW13, reg_val);
5090 reg_val = vlv_dpio_read(dev_priv, pipe, VLV_PLL_DW9(1));
5091 reg_val &= 0xffffff00;
5092 vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW9(1), reg_val);
5094 reg_val = vlv_dpio_read(dev_priv, pipe, VLV_REF_DW13);
5095 reg_val &= 0x00ffffff;
5096 reg_val |= 0xb0000000;
5097 vlv_dpio_write(dev_priv, pipe, VLV_REF_DW13, reg_val);
5100 static void intel_pch_transcoder_set_m_n(struct intel_crtc *crtc,
5101 struct intel_link_m_n *m_n)
5103 struct drm_device *dev = crtc->base.dev;
5104 struct drm_i915_private *dev_priv = dev->dev_private;
5105 int pipe = crtc->pipe;
5107 I915_WRITE(PCH_TRANS_DATA_M1(pipe), TU_SIZE(m_n->tu) | m_n->gmch_m);
5108 I915_WRITE(PCH_TRANS_DATA_N1(pipe), m_n->gmch_n);
5109 I915_WRITE(PCH_TRANS_LINK_M1(pipe), m_n->link_m);
5110 I915_WRITE(PCH_TRANS_LINK_N1(pipe), m_n->link_n);
5113 static void intel_cpu_transcoder_set_m_n(struct intel_crtc *crtc,
5114 struct intel_link_m_n *m_n)
5116 struct drm_device *dev = crtc->base.dev;
5117 struct drm_i915_private *dev_priv = dev->dev_private;
5118 int pipe = crtc->pipe;
5119 enum transcoder transcoder = crtc->config.cpu_transcoder;
5121 if (INTEL_INFO(dev)->gen >= 5) {
5122 I915_WRITE(PIPE_DATA_M1(transcoder), TU_SIZE(m_n->tu) | m_n->gmch_m);
5123 I915_WRITE(PIPE_DATA_N1(transcoder), m_n->gmch_n);
5124 I915_WRITE(PIPE_LINK_M1(transcoder), m_n->link_m);
5125 I915_WRITE(PIPE_LINK_N1(transcoder), m_n->link_n);
5127 I915_WRITE(PIPE_DATA_M_G4X(pipe), TU_SIZE(m_n->tu) | m_n->gmch_m);
5128 I915_WRITE(PIPE_DATA_N_G4X(pipe), m_n->gmch_n);
5129 I915_WRITE(PIPE_LINK_M_G4X(pipe), m_n->link_m);
5130 I915_WRITE(PIPE_LINK_N_G4X(pipe), m_n->link_n);
5134 static void intel_dp_set_m_n(struct intel_crtc *crtc)
5136 if (crtc->config.has_pch_encoder)
5137 intel_pch_transcoder_set_m_n(crtc, &crtc->config.dp_m_n);
5139 intel_cpu_transcoder_set_m_n(crtc, &crtc->config.dp_m_n);
5142 static void vlv_update_pll(struct intel_crtc *crtc)
5144 struct drm_device *dev = crtc->base.dev;
5145 struct drm_i915_private *dev_priv = dev->dev_private;
5146 int pipe = crtc->pipe;
5148 u32 bestn, bestm1, bestm2, bestp1, bestp2;
5149 u32 coreclk, reg_val, dpll_md;
5151 mutex_lock(&dev_priv->dpio_lock);
5153 bestn = crtc->config.dpll.n;
5154 bestm1 = crtc->config.dpll.m1;
5155 bestm2 = crtc->config.dpll.m2;
5156 bestp1 = crtc->config.dpll.p1;
5157 bestp2 = crtc->config.dpll.p2;
5159 /* See eDP HDMI DPIO driver vbios notes doc */
5161 /* PLL B needs special handling */
5163 vlv_pllb_recal_opamp(dev_priv, pipe);
5165 /* Set up Tx target for periodic Rcomp update */
5166 vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW9_BCAST, 0x0100000f);
5168 /* Disable target IRef on PLL */
5169 reg_val = vlv_dpio_read(dev_priv, pipe, VLV_PLL_DW8(pipe));
5170 reg_val &= 0x00ffffff;
5171 vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW8(pipe), reg_val);
5173 /* Disable fast lock */
5174 vlv_dpio_write(dev_priv, pipe, VLV_CMN_DW0, 0x610);
5176 /* Set idtafcrecal before PLL is enabled */
5177 mdiv = ((bestm1 << DPIO_M1DIV_SHIFT) | (bestm2 & DPIO_M2DIV_MASK));
5178 mdiv |= ((bestp1 << DPIO_P1_SHIFT) | (bestp2 << DPIO_P2_SHIFT));
5179 mdiv |= ((bestn << DPIO_N_SHIFT));
5180 mdiv |= (1 << DPIO_K_SHIFT);
5183 * Post divider depends on pixel clock rate, DAC vs digital (and LVDS,
5184 * but we don't support that).
5185 * Note: don't use the DAC post divider as it seems unstable.
5187 mdiv |= (DPIO_POST_DIV_HDMIDP << DPIO_POST_DIV_SHIFT);
5188 vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW3(pipe), mdiv);
5190 mdiv |= DPIO_ENABLE_CALIBRATION;
5191 vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW3(pipe), mdiv);
5193 /* Set HBR and RBR LPF coefficients */
5194 if (crtc->config.port_clock == 162000 ||
5195 intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_ANALOG) ||
5196 intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_HDMI))
5197 vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW10(pipe),
5200 vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW10(pipe),
5203 if (intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_EDP) ||
5204 intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_DISPLAYPORT)) {
5205 /* Use SSC source */
5207 vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW5(pipe),
5210 vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW5(pipe),
5212 } else { /* HDMI or VGA */
5213 /* Use bend source */
5215 vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW5(pipe),
5218 vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW5(pipe),
5222 coreclk = vlv_dpio_read(dev_priv, pipe, VLV_PLL_DW7(pipe));
5223 coreclk = (coreclk & 0x0000ff00) | 0x01c00000;
5224 if (intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_DISPLAYPORT) ||
5225 intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_EDP))
5226 coreclk |= 0x01000000;
5227 vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW7(pipe), coreclk);
5229 vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW11(pipe), 0x87871000);
5232 * Enable DPIO clock input. We should never disable the reference
5233 * clock for pipe B, since VGA hotplug / manual detection depends
5236 dpll = DPLL_EXT_BUFFER_ENABLE_VLV | DPLL_REFA_CLK_ENABLE_VLV |
5237 DPLL_VGA_MODE_DIS | DPLL_INTEGRATED_CLOCK_VLV;
5238 /* We should never disable this, set it here for state tracking */
5240 dpll |= DPLL_INTEGRATED_CRI_CLK_VLV;
5241 dpll |= DPLL_VCO_ENABLE;
5242 crtc->config.dpll_hw_state.dpll = dpll;
5244 dpll_md = (crtc->config.pixel_multiplier - 1)
5245 << DPLL_MD_UDI_MULTIPLIER_SHIFT;
5246 crtc->config.dpll_hw_state.dpll_md = dpll_md;
5248 if (crtc->config.has_dp_encoder)
5249 intel_dp_set_m_n(crtc);
5251 mutex_unlock(&dev_priv->dpio_lock);
5254 static void i9xx_update_pll(struct intel_crtc *crtc,
5255 intel_clock_t *reduced_clock,
5258 struct drm_device *dev = crtc->base.dev;
5259 struct drm_i915_private *dev_priv = dev->dev_private;
5262 struct dpll *clock = &crtc->config.dpll;
5264 i9xx_update_pll_dividers(crtc, reduced_clock);
5266 is_sdvo = intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_SDVO) ||
5267 intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_HDMI);
5269 dpll = DPLL_VGA_MODE_DIS;
5271 if (intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_LVDS))
5272 dpll |= DPLLB_MODE_LVDS;
5274 dpll |= DPLLB_MODE_DAC_SERIAL;
5276 if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev)) {
5277 dpll |= (crtc->config.pixel_multiplier - 1)
5278 << SDVO_MULTIPLIER_SHIFT_HIRES;
5282 dpll |= DPLL_SDVO_HIGH_SPEED;
5284 if (intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_DISPLAYPORT))
5285 dpll |= DPLL_SDVO_HIGH_SPEED;
5287 /* compute bitmask from p1 value */
5288 if (IS_PINEVIEW(dev))
5289 dpll |= (1 << (clock->p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT_PINEVIEW;
5291 dpll |= (1 << (clock->p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT;
5292 if (IS_G4X(dev) && reduced_clock)
5293 dpll |= (1 << (reduced_clock->p1 - 1)) << DPLL_FPA1_P1_POST_DIV_SHIFT;
5295 switch (clock->p2) {
5297 dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_5;
5300 dpll |= DPLLB_LVDS_P2_CLOCK_DIV_7;
5303 dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_10;
5306 dpll |= DPLLB_LVDS_P2_CLOCK_DIV_14;
5309 if (INTEL_INFO(dev)->gen >= 4)
5310 dpll |= (6 << PLL_LOAD_PULSE_PHASE_SHIFT);
5312 if (crtc->config.sdvo_tv_clock)
5313 dpll |= PLL_REF_INPUT_TVCLKINBC;
5314 else if (intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_LVDS) &&
5315 intel_panel_use_ssc(dev_priv) && num_connectors < 2)
5316 dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN;
5318 dpll |= PLL_REF_INPUT_DREFCLK;
5320 dpll |= DPLL_VCO_ENABLE;
5321 crtc->config.dpll_hw_state.dpll = dpll;
5323 if (INTEL_INFO(dev)->gen >= 4) {
5324 u32 dpll_md = (crtc->config.pixel_multiplier - 1)
5325 << DPLL_MD_UDI_MULTIPLIER_SHIFT;
5326 crtc->config.dpll_hw_state.dpll_md = dpll_md;
5329 if (crtc->config.has_dp_encoder)
5330 intel_dp_set_m_n(crtc);
5333 static void i8xx_update_pll(struct intel_crtc *crtc,
5334 intel_clock_t *reduced_clock,
5337 struct drm_device *dev = crtc->base.dev;
5338 struct drm_i915_private *dev_priv = dev->dev_private;
5340 struct dpll *clock = &crtc->config.dpll;
5342 i9xx_update_pll_dividers(crtc, reduced_clock);
5344 dpll = DPLL_VGA_MODE_DIS;
5346 if (intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_LVDS)) {
5347 dpll |= (1 << (clock->p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT;
5350 dpll |= PLL_P1_DIVIDE_BY_TWO;
5352 dpll |= (clock->p1 - 2) << DPLL_FPA01_P1_POST_DIV_SHIFT;
5354 dpll |= PLL_P2_DIVIDE_BY_4;
5357 if (intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_DVO))
5358 dpll |= DPLL_DVO_2X_MODE;
5360 if (intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_LVDS) &&
5361 intel_panel_use_ssc(dev_priv) && num_connectors < 2)
5362 dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN;
5364 dpll |= PLL_REF_INPUT_DREFCLK;
5366 dpll |= DPLL_VCO_ENABLE;
5367 crtc->config.dpll_hw_state.dpll = dpll;
5370 static void intel_set_pipe_timings(struct intel_crtc *intel_crtc)
5372 struct drm_device *dev = intel_crtc->base.dev;
5373 struct drm_i915_private *dev_priv = dev->dev_private;
5374 enum pipe pipe = intel_crtc->pipe;
5375 enum transcoder cpu_transcoder = intel_crtc->config.cpu_transcoder;
5376 struct drm_display_mode *adjusted_mode =
5377 &intel_crtc->config.adjusted_mode;
5378 uint32_t crtc_vtotal, crtc_vblank_end;
5381 /* We need to be careful not to changed the adjusted mode, for otherwise
5382 * the hw state checker will get angry at the mismatch. */
5383 crtc_vtotal = adjusted_mode->crtc_vtotal;
5384 crtc_vblank_end = adjusted_mode->crtc_vblank_end;
5386 if (adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE) {
5387 /* the chip adds 2 halflines automatically */
5389 crtc_vblank_end -= 1;
5391 if (intel_pipe_has_type(&intel_crtc->base, INTEL_OUTPUT_SDVO))
5392 vsyncshift = (adjusted_mode->crtc_htotal - 1) / 2;
5394 vsyncshift = adjusted_mode->crtc_hsync_start -
5395 adjusted_mode->crtc_htotal / 2;
5397 vsyncshift += adjusted_mode->crtc_htotal;
5400 if (INTEL_INFO(dev)->gen > 3)
5401 I915_WRITE(VSYNCSHIFT(cpu_transcoder), vsyncshift);
5403 I915_WRITE(HTOTAL(cpu_transcoder),
5404 (adjusted_mode->crtc_hdisplay - 1) |
5405 ((adjusted_mode->crtc_htotal - 1) << 16));
5406 I915_WRITE(HBLANK(cpu_transcoder),
5407 (adjusted_mode->crtc_hblank_start - 1) |
5408 ((adjusted_mode->crtc_hblank_end - 1) << 16));
5409 I915_WRITE(HSYNC(cpu_transcoder),
5410 (adjusted_mode->crtc_hsync_start - 1) |
5411 ((adjusted_mode->crtc_hsync_end - 1) << 16));
5413 I915_WRITE(VTOTAL(cpu_transcoder),
5414 (adjusted_mode->crtc_vdisplay - 1) |
5415 ((crtc_vtotal - 1) << 16));
5416 I915_WRITE(VBLANK(cpu_transcoder),
5417 (adjusted_mode->crtc_vblank_start - 1) |
5418 ((crtc_vblank_end - 1) << 16));
5419 I915_WRITE(VSYNC(cpu_transcoder),
5420 (adjusted_mode->crtc_vsync_start - 1) |
5421 ((adjusted_mode->crtc_vsync_end - 1) << 16));
5423 /* Workaround: when the EDP input selection is B, the VTOTAL_B must be
5424 * programmed with the VTOTAL_EDP value. Same for VTOTAL_C. This is
5425 * documented on the DDI_FUNC_CTL register description, EDP Input Select
5427 if (IS_HASWELL(dev) && cpu_transcoder == TRANSCODER_EDP &&
5428 (pipe == PIPE_B || pipe == PIPE_C))
5429 I915_WRITE(VTOTAL(pipe), I915_READ(VTOTAL(cpu_transcoder)));
5431 /* pipesrc controls the size that is scaled from, which should
5432 * always be the user's requested size.
5434 I915_WRITE(PIPESRC(pipe),
5435 ((intel_crtc->config.pipe_src_w - 1) << 16) |
5436 (intel_crtc->config.pipe_src_h - 1));
5439 static void intel_get_pipe_timings(struct intel_crtc *crtc,
5440 struct intel_crtc_config *pipe_config)
5442 struct drm_device *dev = crtc->base.dev;
5443 struct drm_i915_private *dev_priv = dev->dev_private;
5444 enum transcoder cpu_transcoder = pipe_config->cpu_transcoder;
5447 tmp = I915_READ(HTOTAL(cpu_transcoder));
5448 pipe_config->adjusted_mode.crtc_hdisplay = (tmp & 0xffff) + 1;
5449 pipe_config->adjusted_mode.crtc_htotal = ((tmp >> 16) & 0xffff) + 1;
5450 tmp = I915_READ(HBLANK(cpu_transcoder));
5451 pipe_config->adjusted_mode.crtc_hblank_start = (tmp & 0xffff) + 1;
5452 pipe_config->adjusted_mode.crtc_hblank_end = ((tmp >> 16) & 0xffff) + 1;
5453 tmp = I915_READ(HSYNC(cpu_transcoder));
5454 pipe_config->adjusted_mode.crtc_hsync_start = (tmp & 0xffff) + 1;
5455 pipe_config->adjusted_mode.crtc_hsync_end = ((tmp >> 16) & 0xffff) + 1;
5457 tmp = I915_READ(VTOTAL(cpu_transcoder));
5458 pipe_config->adjusted_mode.crtc_vdisplay = (tmp & 0xffff) + 1;
5459 pipe_config->adjusted_mode.crtc_vtotal = ((tmp >> 16) & 0xffff) + 1;
5460 tmp = I915_READ(VBLANK(cpu_transcoder));
5461 pipe_config->adjusted_mode.crtc_vblank_start = (tmp & 0xffff) + 1;
5462 pipe_config->adjusted_mode.crtc_vblank_end = ((tmp >> 16) & 0xffff) + 1;
5463 tmp = I915_READ(VSYNC(cpu_transcoder));
5464 pipe_config->adjusted_mode.crtc_vsync_start = (tmp & 0xffff) + 1;
5465 pipe_config->adjusted_mode.crtc_vsync_end = ((tmp >> 16) & 0xffff) + 1;
5467 if (I915_READ(PIPECONF(cpu_transcoder)) & PIPECONF_INTERLACE_MASK) {
5468 pipe_config->adjusted_mode.flags |= DRM_MODE_FLAG_INTERLACE;
5469 pipe_config->adjusted_mode.crtc_vtotal += 1;
5470 pipe_config->adjusted_mode.crtc_vblank_end += 1;
5473 tmp = I915_READ(PIPESRC(crtc->pipe));
5474 pipe_config->pipe_src_h = (tmp & 0xffff) + 1;
5475 pipe_config->pipe_src_w = ((tmp >> 16) & 0xffff) + 1;
5477 pipe_config->requested_mode.vdisplay = pipe_config->pipe_src_h;
5478 pipe_config->requested_mode.hdisplay = pipe_config->pipe_src_w;
5481 void intel_mode_from_pipe_config(struct drm_display_mode *mode,
5482 struct intel_crtc_config *pipe_config)
5484 mode->hdisplay = pipe_config->adjusted_mode.crtc_hdisplay;
5485 mode->htotal = pipe_config->adjusted_mode.crtc_htotal;
5486 mode->hsync_start = pipe_config->adjusted_mode.crtc_hsync_start;
5487 mode->hsync_end = pipe_config->adjusted_mode.crtc_hsync_end;
5489 mode->vdisplay = pipe_config->adjusted_mode.crtc_vdisplay;
5490 mode->vtotal = pipe_config->adjusted_mode.crtc_vtotal;
5491 mode->vsync_start = pipe_config->adjusted_mode.crtc_vsync_start;
5492 mode->vsync_end = pipe_config->adjusted_mode.crtc_vsync_end;
5494 mode->flags = pipe_config->adjusted_mode.flags;
5496 mode->clock = pipe_config->adjusted_mode.crtc_clock;
5497 mode->flags |= pipe_config->adjusted_mode.flags;
5500 static void i9xx_set_pipeconf(struct intel_crtc *intel_crtc)
5502 struct drm_device *dev = intel_crtc->base.dev;
5503 struct drm_i915_private *dev_priv = dev->dev_private;
5508 if (dev_priv->quirks & QUIRK_PIPEA_FORCE &&
5509 I915_READ(PIPECONF(intel_crtc->pipe)) & PIPECONF_ENABLE)
5510 pipeconf |= PIPECONF_ENABLE;
5512 if (intel_crtc->config.double_wide)
5513 pipeconf |= PIPECONF_DOUBLE_WIDE;
5515 /* only g4x and later have fancy bpc/dither controls */
5516 if (IS_G4X(dev) || IS_VALLEYVIEW(dev)) {
5517 /* Bspec claims that we can't use dithering for 30bpp pipes. */
5518 if (intel_crtc->config.dither && intel_crtc->config.pipe_bpp != 30)
5519 pipeconf |= PIPECONF_DITHER_EN |
5520 PIPECONF_DITHER_TYPE_SP;
5522 switch (intel_crtc->config.pipe_bpp) {
5524 pipeconf |= PIPECONF_6BPC;
5527 pipeconf |= PIPECONF_8BPC;
5530 pipeconf |= PIPECONF_10BPC;
5533 /* Case prevented by intel_choose_pipe_bpp_dither. */
5538 if (HAS_PIPE_CXSR(dev)) {
5539 if (intel_crtc->lowfreq_avail) {
5540 DRM_DEBUG_KMS("enabling CxSR downclocking\n");
5541 pipeconf |= PIPECONF_CXSR_DOWNCLOCK;
5543 DRM_DEBUG_KMS("disabling CxSR downclocking\n");
5547 if (intel_crtc->config.adjusted_mode.flags & DRM_MODE_FLAG_INTERLACE) {
5548 if (INTEL_INFO(dev)->gen < 4 ||
5549 intel_pipe_has_type(&intel_crtc->base, INTEL_OUTPUT_SDVO))
5550 pipeconf |= PIPECONF_INTERLACE_W_FIELD_INDICATION;
5552 pipeconf |= PIPECONF_INTERLACE_W_SYNC_SHIFT;
5554 pipeconf |= PIPECONF_PROGRESSIVE;
5556 if (IS_VALLEYVIEW(dev) && intel_crtc->config.limited_color_range)
5557 pipeconf |= PIPECONF_COLOR_RANGE_SELECT;
5559 I915_WRITE(PIPECONF(intel_crtc->pipe), pipeconf);
5560 POSTING_READ(PIPECONF(intel_crtc->pipe));
5563 static int i9xx_crtc_mode_set(struct drm_crtc *crtc,
5565 struct drm_framebuffer *fb)
5567 struct drm_device *dev = crtc->dev;
5568 struct drm_i915_private *dev_priv = dev->dev_private;
5569 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
5570 int pipe = intel_crtc->pipe;
5571 int plane = intel_crtc->plane;
5572 int refclk, num_connectors = 0;
5573 intel_clock_t clock, reduced_clock;
5575 bool ok, has_reduced_clock = false;
5576 bool is_lvds = false, is_dsi = false;
5577 struct intel_encoder *encoder;
5578 const intel_limit_t *limit;
5581 for_each_encoder_on_crtc(dev, crtc, encoder) {
5582 switch (encoder->type) {
5583 case INTEL_OUTPUT_LVDS:
5586 case INTEL_OUTPUT_DSI:
5597 if (!intel_crtc->config.clock_set) {
5598 refclk = i9xx_get_refclk(crtc, num_connectors);
5601 * Returns a set of divisors for the desired target clock with
5602 * the given refclk, or FALSE. The returned values represent
5603 * the clock equation: reflck * (5 * (m1 + 2) + (m2 + 2)) / (n +
5606 limit = intel_limit(crtc, refclk);
5607 ok = dev_priv->display.find_dpll(limit, crtc,
5608 intel_crtc->config.port_clock,
5609 refclk, NULL, &clock);
5611 DRM_ERROR("Couldn't find PLL settings for mode!\n");
5615 if (is_lvds && dev_priv->lvds_downclock_avail) {
5617 * Ensure we match the reduced clock's P to the target
5618 * clock. If the clocks don't match, we can't switch
5619 * the display clock by using the FP0/FP1. In such case
5620 * we will disable the LVDS downclock feature.
5623 dev_priv->display.find_dpll(limit, crtc,
5624 dev_priv->lvds_downclock,
5628 /* Compat-code for transition, will disappear. */
5629 intel_crtc->config.dpll.n = clock.n;
5630 intel_crtc->config.dpll.m1 = clock.m1;
5631 intel_crtc->config.dpll.m2 = clock.m2;
5632 intel_crtc->config.dpll.p1 = clock.p1;
5633 intel_crtc->config.dpll.p2 = clock.p2;
5637 i8xx_update_pll(intel_crtc,
5638 has_reduced_clock ? &reduced_clock : NULL,
5640 } else if (IS_VALLEYVIEW(dev)) {
5641 vlv_update_pll(intel_crtc);
5643 i9xx_update_pll(intel_crtc,
5644 has_reduced_clock ? &reduced_clock : NULL,
5649 /* Set up the display plane register */
5650 dspcntr = DISPPLANE_GAMMA_ENABLE;
5652 if (!IS_VALLEYVIEW(dev)) {
5654 dspcntr &= ~DISPPLANE_SEL_PIPE_MASK;
5656 dspcntr |= DISPPLANE_SEL_PIPE_B;
5659 intel_set_pipe_timings(intel_crtc);
5661 /* pipesrc and dspsize control the size that is scaled from,
5662 * which should always be the user's requested size.
5664 I915_WRITE(DSPSIZE(plane),
5665 ((intel_crtc->config.pipe_src_h - 1) << 16) |
5666 (intel_crtc->config.pipe_src_w - 1));
5667 I915_WRITE(DSPPOS(plane), 0);
5669 i9xx_set_pipeconf(intel_crtc);
5671 I915_WRITE(DSPCNTR(plane), dspcntr);
5672 POSTING_READ(DSPCNTR(plane));
5674 ret = intel_pipe_set_base(crtc, x, y, fb);
5679 static void i9xx_get_pfit_config(struct intel_crtc *crtc,
5680 struct intel_crtc_config *pipe_config)
5682 struct drm_device *dev = crtc->base.dev;
5683 struct drm_i915_private *dev_priv = dev->dev_private;
5686 if (INTEL_INFO(dev)->gen <= 3 && (IS_I830(dev) || !IS_MOBILE(dev)))
5689 tmp = I915_READ(PFIT_CONTROL);
5690 if (!(tmp & PFIT_ENABLE))
5693 /* Check whether the pfit is attached to our pipe. */
5694 if (INTEL_INFO(dev)->gen < 4) {
5695 if (crtc->pipe != PIPE_B)
5698 if ((tmp & PFIT_PIPE_MASK) != (crtc->pipe << PFIT_PIPE_SHIFT))
5702 pipe_config->gmch_pfit.control = tmp;
5703 pipe_config->gmch_pfit.pgm_ratios = I915_READ(PFIT_PGM_RATIOS);
5704 if (INTEL_INFO(dev)->gen < 5)
5705 pipe_config->gmch_pfit.lvds_border_bits =
5706 I915_READ(LVDS) & LVDS_BORDER_ENABLE;
5709 static void vlv_crtc_clock_get(struct intel_crtc *crtc,
5710 struct intel_crtc_config *pipe_config)
5712 struct drm_device *dev = crtc->base.dev;
5713 struct drm_i915_private *dev_priv = dev->dev_private;
5714 int pipe = pipe_config->cpu_transcoder;
5715 intel_clock_t clock;
5717 int refclk = 100000;
5719 mutex_lock(&dev_priv->dpio_lock);
5720 mdiv = vlv_dpio_read(dev_priv, pipe, VLV_PLL_DW3(pipe));
5721 mutex_unlock(&dev_priv->dpio_lock);
5723 clock.m1 = (mdiv >> DPIO_M1DIV_SHIFT) & 7;
5724 clock.m2 = mdiv & DPIO_M2DIV_MASK;
5725 clock.n = (mdiv >> DPIO_N_SHIFT) & 0xf;
5726 clock.p1 = (mdiv >> DPIO_P1_SHIFT) & 7;
5727 clock.p2 = (mdiv >> DPIO_P2_SHIFT) & 0x1f;
5729 vlv_clock(refclk, &clock);
5731 /* clock.dot is the fast clock */
5732 pipe_config->port_clock = clock.dot / 5;
5735 static void i9xx_get_plane_config(struct intel_crtc *crtc,
5736 struct intel_plane_config *plane_config)
5738 struct drm_device *dev = crtc->base.dev;
5739 struct drm_i915_private *dev_priv = dev->dev_private;
5740 u32 val, base, offset;
5741 int pipe = crtc->pipe, plane = crtc->plane;
5742 int fourcc, pixel_format;
5745 crtc->base.primary->fb = kzalloc(sizeof(struct intel_framebuffer), GFP_KERNEL);
5746 if (!crtc->base.primary->fb) {
5747 DRM_DEBUG_KMS("failed to alloc fb\n");
5751 val = I915_READ(DSPCNTR(plane));
5753 if (INTEL_INFO(dev)->gen >= 4)
5754 if (val & DISPPLANE_TILED)
5755 plane_config->tiled = true;
5757 pixel_format = val & DISPPLANE_PIXFORMAT_MASK;
5758 fourcc = intel_format_to_fourcc(pixel_format);
5759 crtc->base.primary->fb->pixel_format = fourcc;
5760 crtc->base.primary->fb->bits_per_pixel =
5761 drm_format_plane_cpp(fourcc, 0) * 8;
5763 if (INTEL_INFO(dev)->gen >= 4) {
5764 if (plane_config->tiled)
5765 offset = I915_READ(DSPTILEOFF(plane));
5767 offset = I915_READ(DSPLINOFF(plane));
5768 base = I915_READ(DSPSURF(plane)) & 0xfffff000;
5770 base = I915_READ(DSPADDR(plane));
5772 plane_config->base = base;
5774 val = I915_READ(PIPESRC(pipe));
5775 crtc->base.primary->fb->width = ((val >> 16) & 0xfff) + 1;
5776 crtc->base.primary->fb->height = ((val >> 0) & 0xfff) + 1;
5778 val = I915_READ(DSPSTRIDE(pipe));
5779 crtc->base.primary->fb->pitches[0] = val & 0xffffff80;
5781 aligned_height = intel_align_height(dev, crtc->base.primary->fb->height,
5782 plane_config->tiled);
5784 plane_config->size = ALIGN(crtc->base.primary->fb->pitches[0] *
5785 aligned_height, PAGE_SIZE);
5787 DRM_DEBUG_KMS("pipe/plane %d/%d with fb: size=%dx%d@%d, offset=%x, pitch %d, size 0x%x\n",
5788 pipe, plane, crtc->base.primary->fb->width,
5789 crtc->base.primary->fb->height,
5790 crtc->base.primary->fb->bits_per_pixel, base,
5791 crtc->base.primary->fb->pitches[0],
5792 plane_config->size);
5796 static bool i9xx_get_pipe_config(struct intel_crtc *crtc,
5797 struct intel_crtc_config *pipe_config)
5799 struct drm_device *dev = crtc->base.dev;
5800 struct drm_i915_private *dev_priv = dev->dev_private;
5803 if (!intel_display_power_enabled(dev_priv,
5804 POWER_DOMAIN_PIPE(crtc->pipe)))
5807 pipe_config->cpu_transcoder = (enum transcoder) crtc->pipe;
5808 pipe_config->shared_dpll = DPLL_ID_PRIVATE;
5810 tmp = I915_READ(PIPECONF(crtc->pipe));
5811 if (!(tmp & PIPECONF_ENABLE))
5814 if (IS_G4X(dev) || IS_VALLEYVIEW(dev)) {
5815 switch (tmp & PIPECONF_BPC_MASK) {
5817 pipe_config->pipe_bpp = 18;
5820 pipe_config->pipe_bpp = 24;
5822 case PIPECONF_10BPC:
5823 pipe_config->pipe_bpp = 30;
5830 if (INTEL_INFO(dev)->gen < 4)
5831 pipe_config->double_wide = tmp & PIPECONF_DOUBLE_WIDE;
5833 intel_get_pipe_timings(crtc, pipe_config);
5835 i9xx_get_pfit_config(crtc, pipe_config);
5837 if (INTEL_INFO(dev)->gen >= 4) {
5838 tmp = I915_READ(DPLL_MD(crtc->pipe));
5839 pipe_config->pixel_multiplier =
5840 ((tmp & DPLL_MD_UDI_MULTIPLIER_MASK)
5841 >> DPLL_MD_UDI_MULTIPLIER_SHIFT) + 1;
5842 pipe_config->dpll_hw_state.dpll_md = tmp;
5843 } else if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev)) {
5844 tmp = I915_READ(DPLL(crtc->pipe));
5845 pipe_config->pixel_multiplier =
5846 ((tmp & SDVO_MULTIPLIER_MASK)
5847 >> SDVO_MULTIPLIER_SHIFT_HIRES) + 1;
5849 /* Note that on i915G/GM the pixel multiplier is in the sdvo
5850 * port and will be fixed up in the encoder->get_config
5852 pipe_config->pixel_multiplier = 1;
5854 pipe_config->dpll_hw_state.dpll = I915_READ(DPLL(crtc->pipe));
5855 if (!IS_VALLEYVIEW(dev)) {
5856 pipe_config->dpll_hw_state.fp0 = I915_READ(FP0(crtc->pipe));
5857 pipe_config->dpll_hw_state.fp1 = I915_READ(FP1(crtc->pipe));
5859 /* Mask out read-only status bits. */
5860 pipe_config->dpll_hw_state.dpll &= ~(DPLL_LOCK_VLV |
5861 DPLL_PORTC_READY_MASK |
5862 DPLL_PORTB_READY_MASK);
5865 if (IS_VALLEYVIEW(dev))
5866 vlv_crtc_clock_get(crtc, pipe_config);
5868 i9xx_crtc_clock_get(crtc, pipe_config);
5873 static void ironlake_init_pch_refclk(struct drm_device *dev)
5875 struct drm_i915_private *dev_priv = dev->dev_private;
5876 struct drm_mode_config *mode_config = &dev->mode_config;
5877 struct intel_encoder *encoder;
5879 bool has_lvds = false;
5880 bool has_cpu_edp = false;
5881 bool has_panel = false;
5882 bool has_ck505 = false;
5883 bool can_ssc = false;
5885 /* We need to take the global config into account */
5886 list_for_each_entry(encoder, &mode_config->encoder_list,
5888 switch (encoder->type) {
5889 case INTEL_OUTPUT_LVDS:
5893 case INTEL_OUTPUT_EDP:
5895 if (enc_to_dig_port(&encoder->base)->port == PORT_A)
5901 if (HAS_PCH_IBX(dev)) {
5902 has_ck505 = dev_priv->vbt.display_clock_mode;
5903 can_ssc = has_ck505;
5909 DRM_DEBUG_KMS("has_panel %d has_lvds %d has_ck505 %d\n",
5910 has_panel, has_lvds, has_ck505);
5912 /* Ironlake: try to setup display ref clock before DPLL
5913 * enabling. This is only under driver's control after
5914 * PCH B stepping, previous chipset stepping should be
5915 * ignoring this setting.
5917 val = I915_READ(PCH_DREF_CONTROL);
5919 /* As we must carefully and slowly disable/enable each source in turn,
5920 * compute the final state we want first and check if we need to
5921 * make any changes at all.
5924 final &= ~DREF_NONSPREAD_SOURCE_MASK;
5926 final |= DREF_NONSPREAD_CK505_ENABLE;
5928 final |= DREF_NONSPREAD_SOURCE_ENABLE;
5930 final &= ~DREF_SSC_SOURCE_MASK;
5931 final &= ~DREF_CPU_SOURCE_OUTPUT_MASK;
5932 final &= ~DREF_SSC1_ENABLE;
5935 final |= DREF_SSC_SOURCE_ENABLE;
5937 if (intel_panel_use_ssc(dev_priv) && can_ssc)
5938 final |= DREF_SSC1_ENABLE;
5941 if (intel_panel_use_ssc(dev_priv) && can_ssc)
5942 final |= DREF_CPU_SOURCE_OUTPUT_DOWNSPREAD;
5944 final |= DREF_CPU_SOURCE_OUTPUT_NONSPREAD;
5946 final |= DREF_CPU_SOURCE_OUTPUT_DISABLE;
5948 final |= DREF_SSC_SOURCE_DISABLE;
5949 final |= DREF_CPU_SOURCE_OUTPUT_DISABLE;
5955 /* Always enable nonspread source */
5956 val &= ~DREF_NONSPREAD_SOURCE_MASK;
5959 val |= DREF_NONSPREAD_CK505_ENABLE;
5961 val |= DREF_NONSPREAD_SOURCE_ENABLE;
5964 val &= ~DREF_SSC_SOURCE_MASK;
5965 val |= DREF_SSC_SOURCE_ENABLE;
5967 /* SSC must be turned on before enabling the CPU output */
5968 if (intel_panel_use_ssc(dev_priv) && can_ssc) {
5969 DRM_DEBUG_KMS("Using SSC on panel\n");
5970 val |= DREF_SSC1_ENABLE;
5972 val &= ~DREF_SSC1_ENABLE;
5974 /* Get SSC going before enabling the outputs */
5975 I915_WRITE(PCH_DREF_CONTROL, val);
5976 POSTING_READ(PCH_DREF_CONTROL);
5979 val &= ~DREF_CPU_SOURCE_OUTPUT_MASK;
5981 /* Enable CPU source on CPU attached eDP */
5983 if (intel_panel_use_ssc(dev_priv) && can_ssc) {
5984 DRM_DEBUG_KMS("Using SSC on eDP\n");
5985 val |= DREF_CPU_SOURCE_OUTPUT_DOWNSPREAD;
5988 val |= DREF_CPU_SOURCE_OUTPUT_NONSPREAD;
5990 val |= DREF_CPU_SOURCE_OUTPUT_DISABLE;
5992 I915_WRITE(PCH_DREF_CONTROL, val);
5993 POSTING_READ(PCH_DREF_CONTROL);
5996 DRM_DEBUG_KMS("Disabling SSC entirely\n");
5998 val &= ~DREF_CPU_SOURCE_OUTPUT_MASK;
6000 /* Turn off CPU output */
6001 val |= DREF_CPU_SOURCE_OUTPUT_DISABLE;
6003 I915_WRITE(PCH_DREF_CONTROL, val);
6004 POSTING_READ(PCH_DREF_CONTROL);
6007 /* Turn off the SSC source */
6008 val &= ~DREF_SSC_SOURCE_MASK;
6009 val |= DREF_SSC_SOURCE_DISABLE;
6012 val &= ~DREF_SSC1_ENABLE;
6014 I915_WRITE(PCH_DREF_CONTROL, val);
6015 POSTING_READ(PCH_DREF_CONTROL);
6019 BUG_ON(val != final);
6022 static void lpt_reset_fdi_mphy(struct drm_i915_private *dev_priv)
6026 tmp = I915_READ(SOUTH_CHICKEN2);
6027 tmp |= FDI_MPHY_IOSFSB_RESET_CTL;
6028 I915_WRITE(SOUTH_CHICKEN2, tmp);
6030 if (wait_for_atomic_us(I915_READ(SOUTH_CHICKEN2) &
6031 FDI_MPHY_IOSFSB_RESET_STATUS, 100))
6032 DRM_ERROR("FDI mPHY reset assert timeout\n");
6034 tmp = I915_READ(SOUTH_CHICKEN2);
6035 tmp &= ~FDI_MPHY_IOSFSB_RESET_CTL;
6036 I915_WRITE(SOUTH_CHICKEN2, tmp);
6038 if (wait_for_atomic_us((I915_READ(SOUTH_CHICKEN2) &
6039 FDI_MPHY_IOSFSB_RESET_STATUS) == 0, 100))
6040 DRM_ERROR("FDI mPHY reset de-assert timeout\n");
6043 /* WaMPhyProgramming:hsw */
6044 static void lpt_program_fdi_mphy(struct drm_i915_private *dev_priv)
6048 tmp = intel_sbi_read(dev_priv, 0x8008, SBI_MPHY);
6049 tmp &= ~(0xFF << 24);
6050 tmp |= (0x12 << 24);
6051 intel_sbi_write(dev_priv, 0x8008, tmp, SBI_MPHY);
6053 tmp = intel_sbi_read(dev_priv, 0x2008, SBI_MPHY);
6055 intel_sbi_write(dev_priv, 0x2008, tmp, SBI_MPHY);
6057 tmp = intel_sbi_read(dev_priv, 0x2108, SBI_MPHY);
6059 intel_sbi_write(dev_priv, 0x2108, tmp, SBI_MPHY);
6061 tmp = intel_sbi_read(dev_priv, 0x206C, SBI_MPHY);
6062 tmp |= (1 << 24) | (1 << 21) | (1 << 18);
6063 intel_sbi_write(dev_priv, 0x206C, tmp, SBI_MPHY);
6065 tmp = intel_sbi_read(dev_priv, 0x216C, SBI_MPHY);
6066 tmp |= (1 << 24) | (1 << 21) | (1 << 18);
6067 intel_sbi_write(dev_priv, 0x216C, tmp, SBI_MPHY);
6069 tmp = intel_sbi_read(dev_priv, 0x2080, SBI_MPHY);
6072 intel_sbi_write(dev_priv, 0x2080, tmp, SBI_MPHY);
6074 tmp = intel_sbi_read(dev_priv, 0x2180, SBI_MPHY);
6077 intel_sbi_write(dev_priv, 0x2180, tmp, SBI_MPHY);
6079 tmp = intel_sbi_read(dev_priv, 0x208C, SBI_MPHY);
6082 intel_sbi_write(dev_priv, 0x208C, tmp, SBI_MPHY);
6084 tmp = intel_sbi_read(dev_priv, 0x218C, SBI_MPHY);
6087 intel_sbi_write(dev_priv, 0x218C, tmp, SBI_MPHY);
6089 tmp = intel_sbi_read(dev_priv, 0x2098, SBI_MPHY);
6090 tmp &= ~(0xFF << 16);
6091 tmp |= (0x1C << 16);
6092 intel_sbi_write(dev_priv, 0x2098, tmp, SBI_MPHY);
6094 tmp = intel_sbi_read(dev_priv, 0x2198, SBI_MPHY);
6095 tmp &= ~(0xFF << 16);
6096 tmp |= (0x1C << 16);
6097 intel_sbi_write(dev_priv, 0x2198, tmp, SBI_MPHY);
6099 tmp = intel_sbi_read(dev_priv, 0x20C4, SBI_MPHY);
6101 intel_sbi_write(dev_priv, 0x20C4, tmp, SBI_MPHY);
6103 tmp = intel_sbi_read(dev_priv, 0x21C4, SBI_MPHY);
6105 intel_sbi_write(dev_priv, 0x21C4, tmp, SBI_MPHY);
6107 tmp = intel_sbi_read(dev_priv, 0x20EC, SBI_MPHY);
6108 tmp &= ~(0xF << 28);
6110 intel_sbi_write(dev_priv, 0x20EC, tmp, SBI_MPHY);
6112 tmp = intel_sbi_read(dev_priv, 0x21EC, SBI_MPHY);
6113 tmp &= ~(0xF << 28);
6115 intel_sbi_write(dev_priv, 0x21EC, tmp, SBI_MPHY);
6118 /* Implements 3 different sequences from BSpec chapter "Display iCLK
6119 * Programming" based on the parameters passed:
6120 * - Sequence to enable CLKOUT_DP
6121 * - Sequence to enable CLKOUT_DP without spread
6122 * - Sequence to enable CLKOUT_DP for FDI usage and configure PCH FDI I/O
6124 static void lpt_enable_clkout_dp(struct drm_device *dev, bool with_spread,
6127 struct drm_i915_private *dev_priv = dev->dev_private;
6130 if (WARN(with_fdi && !with_spread, "FDI requires downspread\n"))
6132 if (WARN(dev_priv->pch_id == INTEL_PCH_LPT_LP_DEVICE_ID_TYPE &&
6133 with_fdi, "LP PCH doesn't have FDI\n"))
6136 mutex_lock(&dev_priv->dpio_lock);
6138 tmp = intel_sbi_read(dev_priv, SBI_SSCCTL, SBI_ICLK);
6139 tmp &= ~SBI_SSCCTL_DISABLE;
6140 tmp |= SBI_SSCCTL_PATHALT;
6141 intel_sbi_write(dev_priv, SBI_SSCCTL, tmp, SBI_ICLK);
6146 tmp = intel_sbi_read(dev_priv, SBI_SSCCTL, SBI_ICLK);
6147 tmp &= ~SBI_SSCCTL_PATHALT;
6148 intel_sbi_write(dev_priv, SBI_SSCCTL, tmp, SBI_ICLK);
6151 lpt_reset_fdi_mphy(dev_priv);
6152 lpt_program_fdi_mphy(dev_priv);
6156 reg = (dev_priv->pch_id == INTEL_PCH_LPT_LP_DEVICE_ID_TYPE) ?
6157 SBI_GEN0 : SBI_DBUFF0;
6158 tmp = intel_sbi_read(dev_priv, reg, SBI_ICLK);
6159 tmp |= SBI_GEN0_CFG_BUFFENABLE_DISABLE;
6160 intel_sbi_write(dev_priv, reg, tmp, SBI_ICLK);
6162 mutex_unlock(&dev_priv->dpio_lock);
6165 /* Sequence to disable CLKOUT_DP */
6166 static void lpt_disable_clkout_dp(struct drm_device *dev)
6168 struct drm_i915_private *dev_priv = dev->dev_private;
6171 mutex_lock(&dev_priv->dpio_lock);
6173 reg = (dev_priv->pch_id == INTEL_PCH_LPT_LP_DEVICE_ID_TYPE) ?
6174 SBI_GEN0 : SBI_DBUFF0;
6175 tmp = intel_sbi_read(dev_priv, reg, SBI_ICLK);
6176 tmp &= ~SBI_GEN0_CFG_BUFFENABLE_DISABLE;
6177 intel_sbi_write(dev_priv, reg, tmp, SBI_ICLK);
6179 tmp = intel_sbi_read(dev_priv, SBI_SSCCTL, SBI_ICLK);
6180 if (!(tmp & SBI_SSCCTL_DISABLE)) {
6181 if (!(tmp & SBI_SSCCTL_PATHALT)) {
6182 tmp |= SBI_SSCCTL_PATHALT;
6183 intel_sbi_write(dev_priv, SBI_SSCCTL, tmp, SBI_ICLK);
6186 tmp |= SBI_SSCCTL_DISABLE;
6187 intel_sbi_write(dev_priv, SBI_SSCCTL, tmp, SBI_ICLK);
6190 mutex_unlock(&dev_priv->dpio_lock);
6193 static void lpt_init_pch_refclk(struct drm_device *dev)
6195 struct drm_mode_config *mode_config = &dev->mode_config;
6196 struct intel_encoder *encoder;
6197 bool has_vga = false;
6199 list_for_each_entry(encoder, &mode_config->encoder_list, base.head) {
6200 switch (encoder->type) {
6201 case INTEL_OUTPUT_ANALOG:
6208 lpt_enable_clkout_dp(dev, true, true);
6210 lpt_disable_clkout_dp(dev);
6214 * Initialize reference clocks when the driver loads
6216 void intel_init_pch_refclk(struct drm_device *dev)
6218 if (HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev))
6219 ironlake_init_pch_refclk(dev);
6220 else if (HAS_PCH_LPT(dev))
6221 lpt_init_pch_refclk(dev);
6224 static int ironlake_get_refclk(struct drm_crtc *crtc)
6226 struct drm_device *dev = crtc->dev;
6227 struct drm_i915_private *dev_priv = dev->dev_private;
6228 struct intel_encoder *encoder;
6229 int num_connectors = 0;
6230 bool is_lvds = false;
6232 for_each_encoder_on_crtc(dev, crtc, encoder) {
6233 switch (encoder->type) {
6234 case INTEL_OUTPUT_LVDS:
6241 if (is_lvds && intel_panel_use_ssc(dev_priv) && num_connectors < 2) {
6242 DRM_DEBUG_KMS("using SSC reference clock of %d kHz\n",
6243 dev_priv->vbt.lvds_ssc_freq);
6244 return dev_priv->vbt.lvds_ssc_freq;
6250 static void ironlake_set_pipeconf(struct drm_crtc *crtc)
6252 struct drm_i915_private *dev_priv = crtc->dev->dev_private;
6253 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
6254 int pipe = intel_crtc->pipe;
6259 switch (intel_crtc->config.pipe_bpp) {
6261 val |= PIPECONF_6BPC;
6264 val |= PIPECONF_8BPC;
6267 val |= PIPECONF_10BPC;
6270 val |= PIPECONF_12BPC;
6273 /* Case prevented by intel_choose_pipe_bpp_dither. */
6277 if (intel_crtc->config.dither)
6278 val |= (PIPECONF_DITHER_EN | PIPECONF_DITHER_TYPE_SP);
6280 if (intel_crtc->config.adjusted_mode.flags & DRM_MODE_FLAG_INTERLACE)
6281 val |= PIPECONF_INTERLACED_ILK;
6283 val |= PIPECONF_PROGRESSIVE;
6285 if (intel_crtc->config.limited_color_range)
6286 val |= PIPECONF_COLOR_RANGE_SELECT;
6288 I915_WRITE(PIPECONF(pipe), val);
6289 POSTING_READ(PIPECONF(pipe));
6293 * Set up the pipe CSC unit.
6295 * Currently only full range RGB to limited range RGB conversion
6296 * is supported, but eventually this should handle various
6297 * RGB<->YCbCr scenarios as well.
6299 static void intel_set_pipe_csc(struct drm_crtc *crtc)
6301 struct drm_device *dev = crtc->dev;
6302 struct drm_i915_private *dev_priv = dev->dev_private;
6303 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
6304 int pipe = intel_crtc->pipe;
6305 uint16_t coeff = 0x7800; /* 1.0 */
6308 * TODO: Check what kind of values actually come out of the pipe
6309 * with these coeff/postoff values and adjust to get the best
6310 * accuracy. Perhaps we even need to take the bpc value into
6314 if (intel_crtc->config.limited_color_range)
6315 coeff = ((235 - 16) * (1 << 12) / 255) & 0xff8; /* 0.xxx... */
6318 * GY/GU and RY/RU should be the other way around according
6319 * to BSpec, but reality doesn't agree. Just set them up in
6320 * a way that results in the correct picture.
6322 I915_WRITE(PIPE_CSC_COEFF_RY_GY(pipe), coeff << 16);
6323 I915_WRITE(PIPE_CSC_COEFF_BY(pipe), 0);
6325 I915_WRITE(PIPE_CSC_COEFF_RU_GU(pipe), coeff);
6326 I915_WRITE(PIPE_CSC_COEFF_BU(pipe), 0);
6328 I915_WRITE(PIPE_CSC_COEFF_RV_GV(pipe), 0);
6329 I915_WRITE(PIPE_CSC_COEFF_BV(pipe), coeff << 16);
6331 I915_WRITE(PIPE_CSC_PREOFF_HI(pipe), 0);
6332 I915_WRITE(PIPE_CSC_PREOFF_ME(pipe), 0);
6333 I915_WRITE(PIPE_CSC_PREOFF_LO(pipe), 0);
6335 if (INTEL_INFO(dev)->gen > 6) {
6336 uint16_t postoff = 0;
6338 if (intel_crtc->config.limited_color_range)
6339 postoff = (16 * (1 << 12) / 255) & 0x1fff;
6341 I915_WRITE(PIPE_CSC_POSTOFF_HI(pipe), postoff);
6342 I915_WRITE(PIPE_CSC_POSTOFF_ME(pipe), postoff);
6343 I915_WRITE(PIPE_CSC_POSTOFF_LO(pipe), postoff);
6345 I915_WRITE(PIPE_CSC_MODE(pipe), 0);
6347 uint32_t mode = CSC_MODE_YUV_TO_RGB;
6349 if (intel_crtc->config.limited_color_range)
6350 mode |= CSC_BLACK_SCREEN_OFFSET;
6352 I915_WRITE(PIPE_CSC_MODE(pipe), mode);
6356 static void haswell_set_pipeconf(struct drm_crtc *crtc)
6358 struct drm_device *dev = crtc->dev;
6359 struct drm_i915_private *dev_priv = dev->dev_private;
6360 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
6361 enum pipe pipe = intel_crtc->pipe;
6362 enum transcoder cpu_transcoder = intel_crtc->config.cpu_transcoder;
6367 if (IS_HASWELL(dev) && intel_crtc->config.dither)
6368 val |= (PIPECONF_DITHER_EN | PIPECONF_DITHER_TYPE_SP);
6370 if (intel_crtc->config.adjusted_mode.flags & DRM_MODE_FLAG_INTERLACE)
6371 val |= PIPECONF_INTERLACED_ILK;
6373 val |= PIPECONF_PROGRESSIVE;
6375 I915_WRITE(PIPECONF(cpu_transcoder), val);
6376 POSTING_READ(PIPECONF(cpu_transcoder));
6378 I915_WRITE(GAMMA_MODE(intel_crtc->pipe), GAMMA_MODE_MODE_8BIT);
6379 POSTING_READ(GAMMA_MODE(intel_crtc->pipe));
6381 if (IS_BROADWELL(dev)) {
6384 switch (intel_crtc->config.pipe_bpp) {
6386 val |= PIPEMISC_DITHER_6_BPC;
6389 val |= PIPEMISC_DITHER_8_BPC;
6392 val |= PIPEMISC_DITHER_10_BPC;
6395 val |= PIPEMISC_DITHER_12_BPC;
6398 /* Case prevented by pipe_config_set_bpp. */
6402 if (intel_crtc->config.dither)
6403 val |= PIPEMISC_DITHER_ENABLE | PIPEMISC_DITHER_TYPE_SP;
6405 I915_WRITE(PIPEMISC(pipe), val);
6409 static bool ironlake_compute_clocks(struct drm_crtc *crtc,
6410 intel_clock_t *clock,
6411 bool *has_reduced_clock,
6412 intel_clock_t *reduced_clock)
6414 struct drm_device *dev = crtc->dev;
6415 struct drm_i915_private *dev_priv = dev->dev_private;
6416 struct intel_encoder *intel_encoder;
6418 const intel_limit_t *limit;
6419 bool ret, is_lvds = false;
6421 for_each_encoder_on_crtc(dev, crtc, intel_encoder) {
6422 switch (intel_encoder->type) {
6423 case INTEL_OUTPUT_LVDS:
6429 refclk = ironlake_get_refclk(crtc);
6432 * Returns a set of divisors for the desired target clock with the given
6433 * refclk, or FALSE. The returned values represent the clock equation:
6434 * reflck * (5 * (m1 + 2) + (m2 + 2)) / (n + 2) / p1 / p2.
6436 limit = intel_limit(crtc, refclk);
6437 ret = dev_priv->display.find_dpll(limit, crtc,
6438 to_intel_crtc(crtc)->config.port_clock,
6439 refclk, NULL, clock);
6443 if (is_lvds && dev_priv->lvds_downclock_avail) {
6445 * Ensure we match the reduced clock's P to the target clock.
6446 * If the clocks don't match, we can't switch the display clock
6447 * by using the FP0/FP1. In such case we will disable the LVDS
6448 * downclock feature.
6450 *has_reduced_clock =
6451 dev_priv->display.find_dpll(limit, crtc,
6452 dev_priv->lvds_downclock,
6460 int ironlake_get_lanes_required(int target_clock, int link_bw, int bpp)
6463 * Account for spread spectrum to avoid
6464 * oversubscribing the link. Max center spread
6465 * is 2.5%; use 5% for safety's sake.
6467 u32 bps = target_clock * bpp * 21 / 20;
6468 return DIV_ROUND_UP(bps, link_bw * 8);
6471 static bool ironlake_needs_fb_cb_tune(struct dpll *dpll, int factor)
6473 return i9xx_dpll_compute_m(dpll) < factor * dpll->n;
6476 static uint32_t ironlake_compute_dpll(struct intel_crtc *intel_crtc,
6478 intel_clock_t *reduced_clock, u32 *fp2)
6480 struct drm_crtc *crtc = &intel_crtc->base;
6481 struct drm_device *dev = crtc->dev;
6482 struct drm_i915_private *dev_priv = dev->dev_private;
6483 struct intel_encoder *intel_encoder;
6485 int factor, num_connectors = 0;
6486 bool is_lvds = false, is_sdvo = false;
6488 for_each_encoder_on_crtc(dev, crtc, intel_encoder) {
6489 switch (intel_encoder->type) {
6490 case INTEL_OUTPUT_LVDS:
6493 case INTEL_OUTPUT_SDVO:
6494 case INTEL_OUTPUT_HDMI:
6502 /* Enable autotuning of the PLL clock (if permissible) */
6505 if ((intel_panel_use_ssc(dev_priv) &&
6506 dev_priv->vbt.lvds_ssc_freq == 100000) ||
6507 (HAS_PCH_IBX(dev) && intel_is_dual_link_lvds(dev)))
6509 } else if (intel_crtc->config.sdvo_tv_clock)
6512 if (ironlake_needs_fb_cb_tune(&intel_crtc->config.dpll, factor))
6515 if (fp2 && (reduced_clock->m < factor * reduced_clock->n))
6521 dpll |= DPLLB_MODE_LVDS;
6523 dpll |= DPLLB_MODE_DAC_SERIAL;
6525 dpll |= (intel_crtc->config.pixel_multiplier - 1)
6526 << PLL_REF_SDVO_HDMI_MULTIPLIER_SHIFT;
6529 dpll |= DPLL_SDVO_HIGH_SPEED;
6530 if (intel_crtc->config.has_dp_encoder)
6531 dpll |= DPLL_SDVO_HIGH_SPEED;
6533 /* compute bitmask from p1 value */
6534 dpll |= (1 << (intel_crtc->config.dpll.p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT;
6536 dpll |= (1 << (intel_crtc->config.dpll.p1 - 1)) << DPLL_FPA1_P1_POST_DIV_SHIFT;
6538 switch (intel_crtc->config.dpll.p2) {
6540 dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_5;
6543 dpll |= DPLLB_LVDS_P2_CLOCK_DIV_7;
6546 dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_10;
6549 dpll |= DPLLB_LVDS_P2_CLOCK_DIV_14;
6553 if (is_lvds && intel_panel_use_ssc(dev_priv) && num_connectors < 2)
6554 dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN;
6556 dpll |= PLL_REF_INPUT_DREFCLK;
6558 return dpll | DPLL_VCO_ENABLE;
6561 static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
6563 struct drm_framebuffer *fb)
6565 struct drm_device *dev = crtc->dev;
6566 struct drm_i915_private *dev_priv = dev->dev_private;
6567 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
6568 int pipe = intel_crtc->pipe;
6569 int plane = intel_crtc->plane;
6570 int num_connectors = 0;
6571 intel_clock_t clock, reduced_clock;
6572 u32 dpll = 0, fp = 0, fp2 = 0;
6573 bool ok, has_reduced_clock = false;
6574 bool is_lvds = false;
6575 struct intel_encoder *encoder;
6576 struct intel_shared_dpll *pll;
6579 for_each_encoder_on_crtc(dev, crtc, encoder) {
6580 switch (encoder->type) {
6581 case INTEL_OUTPUT_LVDS:
6589 WARN(!(HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev)),
6590 "Unexpected PCH type %d\n", INTEL_PCH_TYPE(dev));
6592 ok = ironlake_compute_clocks(crtc, &clock,
6593 &has_reduced_clock, &reduced_clock);
6594 if (!ok && !intel_crtc->config.clock_set) {
6595 DRM_ERROR("Couldn't find PLL settings for mode!\n");
6598 /* Compat-code for transition, will disappear. */
6599 if (!intel_crtc->config.clock_set) {
6600 intel_crtc->config.dpll.n = clock.n;
6601 intel_crtc->config.dpll.m1 = clock.m1;
6602 intel_crtc->config.dpll.m2 = clock.m2;
6603 intel_crtc->config.dpll.p1 = clock.p1;
6604 intel_crtc->config.dpll.p2 = clock.p2;
6607 /* CPU eDP is the only output that doesn't need a PCH PLL of its own. */
6608 if (intel_crtc->config.has_pch_encoder) {
6609 fp = i9xx_dpll_compute_fp(&intel_crtc->config.dpll);
6610 if (has_reduced_clock)
6611 fp2 = i9xx_dpll_compute_fp(&reduced_clock);
6613 dpll = ironlake_compute_dpll(intel_crtc,
6614 &fp, &reduced_clock,
6615 has_reduced_clock ? &fp2 : NULL);
6617 intel_crtc->config.dpll_hw_state.dpll = dpll;
6618 intel_crtc->config.dpll_hw_state.fp0 = fp;
6619 if (has_reduced_clock)
6620 intel_crtc->config.dpll_hw_state.fp1 = fp2;
6622 intel_crtc->config.dpll_hw_state.fp1 = fp;
6624 pll = intel_get_shared_dpll(intel_crtc);
6626 DRM_DEBUG_DRIVER("failed to find PLL for pipe %c\n",
6631 intel_put_shared_dpll(intel_crtc);
6633 if (intel_crtc->config.has_dp_encoder)
6634 intel_dp_set_m_n(intel_crtc);
6636 if (is_lvds && has_reduced_clock && i915.powersave)
6637 intel_crtc->lowfreq_avail = true;
6639 intel_crtc->lowfreq_avail = false;
6641 intel_set_pipe_timings(intel_crtc);
6643 if (intel_crtc->config.has_pch_encoder) {
6644 intel_cpu_transcoder_set_m_n(intel_crtc,
6645 &intel_crtc->config.fdi_m_n);
6648 ironlake_set_pipeconf(crtc);
6650 /* Set up the display plane register */
6651 I915_WRITE(DSPCNTR(plane), DISPPLANE_GAMMA_ENABLE);
6652 POSTING_READ(DSPCNTR(plane));
6654 ret = intel_pipe_set_base(crtc, x, y, fb);
6659 static void intel_pch_transcoder_get_m_n(struct intel_crtc *crtc,
6660 struct intel_link_m_n *m_n)
6662 struct drm_device *dev = crtc->base.dev;
6663 struct drm_i915_private *dev_priv = dev->dev_private;
6664 enum pipe pipe = crtc->pipe;
6666 m_n->link_m = I915_READ(PCH_TRANS_LINK_M1(pipe));
6667 m_n->link_n = I915_READ(PCH_TRANS_LINK_N1(pipe));
6668 m_n->gmch_m = I915_READ(PCH_TRANS_DATA_M1(pipe))
6670 m_n->gmch_n = I915_READ(PCH_TRANS_DATA_N1(pipe));
6671 m_n->tu = ((I915_READ(PCH_TRANS_DATA_M1(pipe))
6672 & TU_SIZE_MASK) >> TU_SIZE_SHIFT) + 1;
6675 static void intel_cpu_transcoder_get_m_n(struct intel_crtc *crtc,
6676 enum transcoder transcoder,
6677 struct intel_link_m_n *m_n)
6679 struct drm_device *dev = crtc->base.dev;
6680 struct drm_i915_private *dev_priv = dev->dev_private;
6681 enum pipe pipe = crtc->pipe;
6683 if (INTEL_INFO(dev)->gen >= 5) {
6684 m_n->link_m = I915_READ(PIPE_LINK_M1(transcoder));
6685 m_n->link_n = I915_READ(PIPE_LINK_N1(transcoder));
6686 m_n->gmch_m = I915_READ(PIPE_DATA_M1(transcoder))
6688 m_n->gmch_n = I915_READ(PIPE_DATA_N1(transcoder));
6689 m_n->tu = ((I915_READ(PIPE_DATA_M1(transcoder))
6690 & TU_SIZE_MASK) >> TU_SIZE_SHIFT) + 1;
6692 m_n->link_m = I915_READ(PIPE_LINK_M_G4X(pipe));
6693 m_n->link_n = I915_READ(PIPE_LINK_N_G4X(pipe));
6694 m_n->gmch_m = I915_READ(PIPE_DATA_M_G4X(pipe))
6696 m_n->gmch_n = I915_READ(PIPE_DATA_N_G4X(pipe));
6697 m_n->tu = ((I915_READ(PIPE_DATA_M_G4X(pipe))
6698 & TU_SIZE_MASK) >> TU_SIZE_SHIFT) + 1;
6702 void intel_dp_get_m_n(struct intel_crtc *crtc,
6703 struct intel_crtc_config *pipe_config)
6705 if (crtc->config.has_pch_encoder)
6706 intel_pch_transcoder_get_m_n(crtc, &pipe_config->dp_m_n);
6708 intel_cpu_transcoder_get_m_n(crtc, pipe_config->cpu_transcoder,
6709 &pipe_config->dp_m_n);
6712 static void ironlake_get_fdi_m_n_config(struct intel_crtc *crtc,
6713 struct intel_crtc_config *pipe_config)
6715 intel_cpu_transcoder_get_m_n(crtc, pipe_config->cpu_transcoder,
6716 &pipe_config->fdi_m_n);
6719 static void ironlake_get_pfit_config(struct intel_crtc *crtc,
6720 struct intel_crtc_config *pipe_config)
6722 struct drm_device *dev = crtc->base.dev;
6723 struct drm_i915_private *dev_priv = dev->dev_private;
6726 tmp = I915_READ(PF_CTL(crtc->pipe));
6728 if (tmp & PF_ENABLE) {
6729 pipe_config->pch_pfit.enabled = true;
6730 pipe_config->pch_pfit.pos = I915_READ(PF_WIN_POS(crtc->pipe));
6731 pipe_config->pch_pfit.size = I915_READ(PF_WIN_SZ(crtc->pipe));
6733 /* We currently do not free assignements of panel fitters on
6734 * ivb/hsw (since we don't use the higher upscaling modes which
6735 * differentiates them) so just WARN about this case for now. */
6737 WARN_ON((tmp & PF_PIPE_SEL_MASK_IVB) !=
6738 PF_PIPE_SEL_IVB(crtc->pipe));
6743 static void ironlake_get_plane_config(struct intel_crtc *crtc,
6744 struct intel_plane_config *plane_config)
6746 struct drm_device *dev = crtc->base.dev;
6747 struct drm_i915_private *dev_priv = dev->dev_private;
6748 u32 val, base, offset;
6749 int pipe = crtc->pipe, plane = crtc->plane;
6750 int fourcc, pixel_format;
6753 crtc->base.primary->fb = kzalloc(sizeof(struct intel_framebuffer), GFP_KERNEL);
6754 if (!crtc->base.primary->fb) {
6755 DRM_DEBUG_KMS("failed to alloc fb\n");
6759 val = I915_READ(DSPCNTR(plane));
6761 if (INTEL_INFO(dev)->gen >= 4)
6762 if (val & DISPPLANE_TILED)
6763 plane_config->tiled = true;
6765 pixel_format = val & DISPPLANE_PIXFORMAT_MASK;
6766 fourcc = intel_format_to_fourcc(pixel_format);
6767 crtc->base.primary->fb->pixel_format = fourcc;
6768 crtc->base.primary->fb->bits_per_pixel =
6769 drm_format_plane_cpp(fourcc, 0) * 8;
6771 base = I915_READ(DSPSURF(plane)) & 0xfffff000;
6772 if (IS_HASWELL(dev) || IS_BROADWELL(dev)) {
6773 offset = I915_READ(DSPOFFSET(plane));
6775 if (plane_config->tiled)
6776 offset = I915_READ(DSPTILEOFF(plane));
6778 offset = I915_READ(DSPLINOFF(plane));
6780 plane_config->base = base;
6782 val = I915_READ(PIPESRC(pipe));
6783 crtc->base.primary->fb->width = ((val >> 16) & 0xfff) + 1;
6784 crtc->base.primary->fb->height = ((val >> 0) & 0xfff) + 1;
6786 val = I915_READ(DSPSTRIDE(pipe));
6787 crtc->base.primary->fb->pitches[0] = val & 0xffffff80;
6789 aligned_height = intel_align_height(dev, crtc->base.primary->fb->height,
6790 plane_config->tiled);
6792 plane_config->size = ALIGN(crtc->base.primary->fb->pitches[0] *
6793 aligned_height, PAGE_SIZE);
6795 DRM_DEBUG_KMS("pipe/plane %d/%d with fb: size=%dx%d@%d, offset=%x, pitch %d, size 0x%x\n",
6796 pipe, plane, crtc->base.primary->fb->width,
6797 crtc->base.primary->fb->height,
6798 crtc->base.primary->fb->bits_per_pixel, base,
6799 crtc->base.primary->fb->pitches[0],
6800 plane_config->size);
6803 static bool ironlake_get_pipe_config(struct intel_crtc *crtc,
6804 struct intel_crtc_config *pipe_config)
6806 struct drm_device *dev = crtc->base.dev;
6807 struct drm_i915_private *dev_priv = dev->dev_private;
6810 pipe_config->cpu_transcoder = (enum transcoder) crtc->pipe;
6811 pipe_config->shared_dpll = DPLL_ID_PRIVATE;
6813 tmp = I915_READ(PIPECONF(crtc->pipe));
6814 if (!(tmp & PIPECONF_ENABLE))
6817 switch (tmp & PIPECONF_BPC_MASK) {
6819 pipe_config->pipe_bpp = 18;
6822 pipe_config->pipe_bpp = 24;
6824 case PIPECONF_10BPC:
6825 pipe_config->pipe_bpp = 30;
6827 case PIPECONF_12BPC:
6828 pipe_config->pipe_bpp = 36;
6834 if (I915_READ(PCH_TRANSCONF(crtc->pipe)) & TRANS_ENABLE) {
6835 struct intel_shared_dpll *pll;
6837 pipe_config->has_pch_encoder = true;
6839 tmp = I915_READ(FDI_RX_CTL(crtc->pipe));
6840 pipe_config->fdi_lanes = ((FDI_DP_PORT_WIDTH_MASK & tmp) >>
6841 FDI_DP_PORT_WIDTH_SHIFT) + 1;
6843 ironlake_get_fdi_m_n_config(crtc, pipe_config);
6845 if (HAS_PCH_IBX(dev_priv->dev)) {
6846 pipe_config->shared_dpll =
6847 (enum intel_dpll_id) crtc->pipe;
6849 tmp = I915_READ(PCH_DPLL_SEL);
6850 if (tmp & TRANS_DPLLB_SEL(crtc->pipe))
6851 pipe_config->shared_dpll = DPLL_ID_PCH_PLL_B;
6853 pipe_config->shared_dpll = DPLL_ID_PCH_PLL_A;
6856 pll = &dev_priv->shared_dplls[pipe_config->shared_dpll];
6858 WARN_ON(!pll->get_hw_state(dev_priv, pll,
6859 &pipe_config->dpll_hw_state));
6861 tmp = pipe_config->dpll_hw_state.dpll;
6862 pipe_config->pixel_multiplier =
6863 ((tmp & PLL_REF_SDVO_HDMI_MULTIPLIER_MASK)
6864 >> PLL_REF_SDVO_HDMI_MULTIPLIER_SHIFT) + 1;
6866 ironlake_pch_clock_get(crtc, pipe_config);
6868 pipe_config->pixel_multiplier = 1;
6871 intel_get_pipe_timings(crtc, pipe_config);
6873 ironlake_get_pfit_config(crtc, pipe_config);
6878 static void assert_can_disable_lcpll(struct drm_i915_private *dev_priv)
6880 struct drm_device *dev = dev_priv->dev;
6881 struct intel_ddi_plls *plls = &dev_priv->ddi_plls;
6882 struct intel_crtc *crtc;
6883 unsigned long irqflags;
6886 list_for_each_entry(crtc, &dev->mode_config.crtc_list, base.head)
6887 WARN(crtc->active, "CRTC for pipe %c enabled\n",
6888 pipe_name(crtc->pipe));
6890 WARN(I915_READ(HSW_PWR_WELL_DRIVER), "Power well on\n");
6891 WARN(plls->spll_refcount, "SPLL enabled\n");
6892 WARN(plls->wrpll1_refcount, "WRPLL1 enabled\n");
6893 WARN(plls->wrpll2_refcount, "WRPLL2 enabled\n");
6894 WARN(I915_READ(PCH_PP_STATUS) & PP_ON, "Panel power on\n");
6895 WARN(I915_READ(BLC_PWM_CPU_CTL2) & BLM_PWM_ENABLE,
6896 "CPU PWM1 enabled\n");
6897 WARN(I915_READ(HSW_BLC_PWM2_CTL) & BLM_PWM_ENABLE,
6898 "CPU PWM2 enabled\n");
6899 WARN(I915_READ(BLC_PWM_PCH_CTL1) & BLM_PCH_PWM_ENABLE,
6900 "PCH PWM1 enabled\n");
6901 WARN(I915_READ(UTIL_PIN_CTL) & UTIL_PIN_ENABLE,
6902 "Utility pin enabled\n");
6903 WARN(I915_READ(PCH_GTC_CTL) & PCH_GTC_ENABLE, "PCH GTC enabled\n");
6905 spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
6906 val = I915_READ(DEIMR);
6907 WARN((val | DE_PCH_EVENT_IVB) != 0xffffffff,
6908 "Unexpected DEIMR bits enabled: 0x%x\n", val);
6909 val = I915_READ(SDEIMR);
6910 WARN((val | SDE_HOTPLUG_MASK_CPT) != 0xffffffff,
6911 "Unexpected SDEIMR bits enabled: 0x%x\n", val);
6912 spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
6916 * This function implements pieces of two sequences from BSpec:
6917 * - Sequence for display software to disable LCPLL
6918 * - Sequence for display software to allow package C8+
6919 * The steps implemented here are just the steps that actually touch the LCPLL
6920 * register. Callers should take care of disabling all the display engine
6921 * functions, doing the mode unset, fixing interrupts, etc.
6923 static void hsw_disable_lcpll(struct drm_i915_private *dev_priv,
6924 bool switch_to_fclk, bool allow_power_down)
6928 assert_can_disable_lcpll(dev_priv);
6930 val = I915_READ(LCPLL_CTL);
6932 if (switch_to_fclk) {
6933 val |= LCPLL_CD_SOURCE_FCLK;
6934 I915_WRITE(LCPLL_CTL, val);
6936 if (wait_for_atomic_us(I915_READ(LCPLL_CTL) &
6937 LCPLL_CD_SOURCE_FCLK_DONE, 1))
6938 DRM_ERROR("Switching to FCLK failed\n");
6940 val = I915_READ(LCPLL_CTL);
6943 val |= LCPLL_PLL_DISABLE;
6944 I915_WRITE(LCPLL_CTL, val);
6945 POSTING_READ(LCPLL_CTL);
6947 if (wait_for((I915_READ(LCPLL_CTL) & LCPLL_PLL_LOCK) == 0, 1))
6948 DRM_ERROR("LCPLL still locked\n");
6950 val = I915_READ(D_COMP);
6951 val |= D_COMP_COMP_DISABLE;
6952 mutex_lock(&dev_priv->rps.hw_lock);
6953 if (sandybridge_pcode_write(dev_priv, GEN6_PCODE_WRITE_D_COMP, val))
6954 DRM_ERROR("Failed to disable D_COMP\n");
6955 mutex_unlock(&dev_priv->rps.hw_lock);
6956 POSTING_READ(D_COMP);
6959 if (wait_for((I915_READ(D_COMP) & D_COMP_RCOMP_IN_PROGRESS) == 0, 1))
6960 DRM_ERROR("D_COMP RCOMP still in progress\n");
6962 if (allow_power_down) {
6963 val = I915_READ(LCPLL_CTL);
6964 val |= LCPLL_POWER_DOWN_ALLOW;
6965 I915_WRITE(LCPLL_CTL, val);
6966 POSTING_READ(LCPLL_CTL);
6971 * Fully restores LCPLL, disallowing power down and switching back to LCPLL
6974 static void hsw_restore_lcpll(struct drm_i915_private *dev_priv)
6977 unsigned long irqflags;
6979 val = I915_READ(LCPLL_CTL);
6981 if ((val & (LCPLL_PLL_LOCK | LCPLL_PLL_DISABLE | LCPLL_CD_SOURCE_FCLK |
6982 LCPLL_POWER_DOWN_ALLOW)) == LCPLL_PLL_LOCK)
6986 * Make sure we're not on PC8 state before disabling PC8, otherwise
6987 * we'll hang the machine. To prevent PC8 state, just enable force_wake.
6989 * The other problem is that hsw_restore_lcpll() is called as part of
6990 * the runtime PM resume sequence, so we can't just call
6991 * gen6_gt_force_wake_get() because that function calls
6992 * intel_runtime_pm_get(), and we can't change the runtime PM refcount
6993 * while we are on the resume sequence. So to solve this problem we have
6994 * to call special forcewake code that doesn't touch runtime PM and
6995 * doesn't enable the forcewake delayed work.
6997 spin_lock_irqsave(&dev_priv->uncore.lock, irqflags);
6998 if (dev_priv->uncore.forcewake_count++ == 0)
6999 dev_priv->uncore.funcs.force_wake_get(dev_priv, FORCEWAKE_ALL);
7000 spin_unlock_irqrestore(&dev_priv->uncore.lock, irqflags);
7002 if (val & LCPLL_POWER_DOWN_ALLOW) {
7003 val &= ~LCPLL_POWER_DOWN_ALLOW;
7004 I915_WRITE(LCPLL_CTL, val);
7005 POSTING_READ(LCPLL_CTL);
7008 val = I915_READ(D_COMP);
7009 val |= D_COMP_COMP_FORCE;
7010 val &= ~D_COMP_COMP_DISABLE;
7011 mutex_lock(&dev_priv->rps.hw_lock);
7012 if (sandybridge_pcode_write(dev_priv, GEN6_PCODE_WRITE_D_COMP, val))
7013 DRM_ERROR("Failed to enable D_COMP\n");
7014 mutex_unlock(&dev_priv->rps.hw_lock);
7015 POSTING_READ(D_COMP);
7017 val = I915_READ(LCPLL_CTL);
7018 val &= ~LCPLL_PLL_DISABLE;
7019 I915_WRITE(LCPLL_CTL, val);
7021 if (wait_for(I915_READ(LCPLL_CTL) & LCPLL_PLL_LOCK, 5))
7022 DRM_ERROR("LCPLL not locked yet\n");
7024 if (val & LCPLL_CD_SOURCE_FCLK) {
7025 val = I915_READ(LCPLL_CTL);
7026 val &= ~LCPLL_CD_SOURCE_FCLK;
7027 I915_WRITE(LCPLL_CTL, val);
7029 if (wait_for_atomic_us((I915_READ(LCPLL_CTL) &
7030 LCPLL_CD_SOURCE_FCLK_DONE) == 0, 1))
7031 DRM_ERROR("Switching back to LCPLL failed\n");
7034 /* See the big comment above. */
7035 spin_lock_irqsave(&dev_priv->uncore.lock, irqflags);
7036 if (--dev_priv->uncore.forcewake_count == 0)
7037 dev_priv->uncore.funcs.force_wake_put(dev_priv, FORCEWAKE_ALL);
7038 spin_unlock_irqrestore(&dev_priv->uncore.lock, irqflags);
7042 * Package states C8 and deeper are really deep PC states that can only be
7043 * reached when all the devices on the system allow it, so even if the graphics
7044 * device allows PC8+, it doesn't mean the system will actually get to these
7045 * states. Our driver only allows PC8+ when going into runtime PM.
7047 * The requirements for PC8+ are that all the outputs are disabled, the power
7048 * well is disabled and most interrupts are disabled, and these are also
7049 * requirements for runtime PM. When these conditions are met, we manually do
7050 * the other conditions: disable the interrupts, clocks and switch LCPLL refclk
7051 * to Fclk. If we're in PC8+ and we get an non-hotplug interrupt, we can hard
7054 * When we really reach PC8 or deeper states (not just when we allow it) we lose
7055 * the state of some registers, so when we come back from PC8+ we need to
7056 * restore this state. We don't get into PC8+ if we're not in RC6, so we don't
7057 * need to take care of the registers kept by RC6. Notice that this happens even
7058 * if we don't put the device in PCI D3 state (which is what currently happens
7059 * because of the runtime PM support).
7061 * For more, read "Display Sequences for Package C8" on the hardware
7064 void hsw_enable_pc8(struct drm_i915_private *dev_priv)
7066 struct drm_device *dev = dev_priv->dev;
7069 WARN_ON(!HAS_PC8(dev));
7071 DRM_DEBUG_KMS("Enabling package C8+\n");
7073 if (dev_priv->pch_id == INTEL_PCH_LPT_LP_DEVICE_ID_TYPE) {
7074 val = I915_READ(SOUTH_DSPCLK_GATE_D);
7075 val &= ~PCH_LP_PARTITION_LEVEL_DISABLE;
7076 I915_WRITE(SOUTH_DSPCLK_GATE_D, val);
7079 lpt_disable_clkout_dp(dev);
7080 hsw_runtime_pm_disable_interrupts(dev);
7081 hsw_disable_lcpll(dev_priv, true, true);
7084 void hsw_disable_pc8(struct drm_i915_private *dev_priv)
7086 struct drm_device *dev = dev_priv->dev;
7089 WARN_ON(!HAS_PC8(dev));
7091 DRM_DEBUG_KMS("Disabling package C8+\n");
7093 hsw_restore_lcpll(dev_priv);
7094 hsw_runtime_pm_restore_interrupts(dev);
7095 lpt_init_pch_refclk(dev);
7097 if (dev_priv->pch_id == INTEL_PCH_LPT_LP_DEVICE_ID_TYPE) {
7098 val = I915_READ(SOUTH_DSPCLK_GATE_D);
7099 val |= PCH_LP_PARTITION_LEVEL_DISABLE;
7100 I915_WRITE(SOUTH_DSPCLK_GATE_D, val);
7103 intel_prepare_ddi(dev);
7104 i915_gem_init_swizzling(dev);
7105 mutex_lock(&dev_priv->rps.hw_lock);
7106 gen6_update_ring_freq(dev);
7107 mutex_unlock(&dev_priv->rps.hw_lock);
7110 static void haswell_modeset_global_resources(struct drm_device *dev)
7112 modeset_update_crtc_power_domains(dev);
7115 static int haswell_crtc_mode_set(struct drm_crtc *crtc,
7117 struct drm_framebuffer *fb)
7119 struct drm_device *dev = crtc->dev;
7120 struct drm_i915_private *dev_priv = dev->dev_private;
7121 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
7122 int plane = intel_crtc->plane;
7125 if (!intel_ddi_pll_select(intel_crtc))
7127 intel_ddi_pll_enable(intel_crtc);
7129 if (intel_crtc->config.has_dp_encoder)
7130 intel_dp_set_m_n(intel_crtc);
7132 intel_crtc->lowfreq_avail = false;
7134 intel_set_pipe_timings(intel_crtc);
7136 if (intel_crtc->config.has_pch_encoder) {
7137 intel_cpu_transcoder_set_m_n(intel_crtc,
7138 &intel_crtc->config.fdi_m_n);
7141 haswell_set_pipeconf(crtc);
7143 intel_set_pipe_csc(crtc);
7145 /* Set up the display plane register */
7146 I915_WRITE(DSPCNTR(plane), DISPPLANE_GAMMA_ENABLE | DISPPLANE_PIPE_CSC_ENABLE);
7147 POSTING_READ(DSPCNTR(plane));
7149 ret = intel_pipe_set_base(crtc, x, y, fb);
7154 static bool haswell_get_pipe_config(struct intel_crtc *crtc,
7155 struct intel_crtc_config *pipe_config)
7157 struct drm_device *dev = crtc->base.dev;
7158 struct drm_i915_private *dev_priv = dev->dev_private;
7159 enum intel_display_power_domain pfit_domain;
7162 if (!intel_display_power_enabled(dev_priv,
7163 POWER_DOMAIN_PIPE(crtc->pipe)))
7166 pipe_config->cpu_transcoder = (enum transcoder) crtc->pipe;
7167 pipe_config->shared_dpll = DPLL_ID_PRIVATE;
7169 tmp = I915_READ(TRANS_DDI_FUNC_CTL(TRANSCODER_EDP));
7170 if (tmp & TRANS_DDI_FUNC_ENABLE) {
7171 enum pipe trans_edp_pipe;
7172 switch (tmp & TRANS_DDI_EDP_INPUT_MASK) {
7174 WARN(1, "unknown pipe linked to edp transcoder\n");
7175 case TRANS_DDI_EDP_INPUT_A_ONOFF:
7176 case TRANS_DDI_EDP_INPUT_A_ON:
7177 trans_edp_pipe = PIPE_A;
7179 case TRANS_DDI_EDP_INPUT_B_ONOFF:
7180 trans_edp_pipe = PIPE_B;
7182 case TRANS_DDI_EDP_INPUT_C_ONOFF:
7183 trans_edp_pipe = PIPE_C;
7187 if (trans_edp_pipe == crtc->pipe)
7188 pipe_config->cpu_transcoder = TRANSCODER_EDP;
7191 if (!intel_display_power_enabled(dev_priv,
7192 POWER_DOMAIN_TRANSCODER(pipe_config->cpu_transcoder)))
7195 tmp = I915_READ(PIPECONF(pipe_config->cpu_transcoder));
7196 if (!(tmp & PIPECONF_ENABLE))
7200 * Haswell has only FDI/PCH transcoder A. It is which is connected to
7201 * DDI E. So just check whether this pipe is wired to DDI E and whether
7202 * the PCH transcoder is on.
7204 tmp = I915_READ(TRANS_DDI_FUNC_CTL(pipe_config->cpu_transcoder));
7205 if ((tmp & TRANS_DDI_PORT_MASK) == TRANS_DDI_SELECT_PORT(PORT_E) &&
7206 I915_READ(LPT_TRANSCONF) & TRANS_ENABLE) {
7207 pipe_config->has_pch_encoder = true;
7209 tmp = I915_READ(FDI_RX_CTL(PIPE_A));
7210 pipe_config->fdi_lanes = ((FDI_DP_PORT_WIDTH_MASK & tmp) >>
7211 FDI_DP_PORT_WIDTH_SHIFT) + 1;
7213 ironlake_get_fdi_m_n_config(crtc, pipe_config);
7216 intel_get_pipe_timings(crtc, pipe_config);
7218 pfit_domain = POWER_DOMAIN_PIPE_PANEL_FITTER(crtc->pipe);
7219 if (intel_display_power_enabled(dev_priv, pfit_domain))
7220 ironlake_get_pfit_config(crtc, pipe_config);
7222 if (IS_HASWELL(dev))
7223 pipe_config->ips_enabled = hsw_crtc_supports_ips(crtc) &&
7224 (I915_READ(IPS_CTL) & IPS_ENABLE);
7226 pipe_config->pixel_multiplier = 1;
7231 static int intel_crtc_mode_set(struct drm_crtc *crtc,
7233 struct drm_framebuffer *fb)
7235 struct drm_device *dev = crtc->dev;
7236 struct drm_i915_private *dev_priv = dev->dev_private;
7237 struct intel_encoder *encoder;
7238 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
7239 struct drm_display_mode *mode = &intel_crtc->config.requested_mode;
7240 int pipe = intel_crtc->pipe;
7243 drm_vblank_pre_modeset(dev, pipe);
7245 ret = dev_priv->display.crtc_mode_set(crtc, x, y, fb);
7247 drm_vblank_post_modeset(dev, pipe);
7252 for_each_encoder_on_crtc(dev, crtc, encoder) {
7253 DRM_DEBUG_KMS("[ENCODER:%d:%s] set [MODE:%d:%s]\n",
7254 encoder->base.base.id,
7255 drm_get_encoder_name(&encoder->base),
7256 mode->base.id, mode->name);
7257 encoder->mode_set(encoder);
7266 } hdmi_audio_clock[] = {
7267 { DIV_ROUND_UP(25200 * 1000, 1001), AUD_CONFIG_PIXEL_CLOCK_HDMI_25175 },
7268 { 25200, AUD_CONFIG_PIXEL_CLOCK_HDMI_25200 }, /* default per bspec */
7269 { 27000, AUD_CONFIG_PIXEL_CLOCK_HDMI_27000 },
7270 { 27000 * 1001 / 1000, AUD_CONFIG_PIXEL_CLOCK_HDMI_27027 },
7271 { 54000, AUD_CONFIG_PIXEL_CLOCK_HDMI_54000 },
7272 { 54000 * 1001 / 1000, AUD_CONFIG_PIXEL_CLOCK_HDMI_54054 },
7273 { DIV_ROUND_UP(74250 * 1000, 1001), AUD_CONFIG_PIXEL_CLOCK_HDMI_74176 },
7274 { 74250, AUD_CONFIG_PIXEL_CLOCK_HDMI_74250 },
7275 { DIV_ROUND_UP(148500 * 1000, 1001), AUD_CONFIG_PIXEL_CLOCK_HDMI_148352 },
7276 { 148500, AUD_CONFIG_PIXEL_CLOCK_HDMI_148500 },
7279 /* get AUD_CONFIG_PIXEL_CLOCK_HDMI_* value for mode */
7280 static u32 audio_config_hdmi_pixel_clock(struct drm_display_mode *mode)
7284 for (i = 0; i < ARRAY_SIZE(hdmi_audio_clock); i++) {
7285 if (mode->clock == hdmi_audio_clock[i].clock)
7289 if (i == ARRAY_SIZE(hdmi_audio_clock)) {
7290 DRM_DEBUG_KMS("HDMI audio pixel clock setting for %d not found, falling back to defaults\n", mode->clock);
7294 DRM_DEBUG_KMS("Configuring HDMI audio for pixel clock %d (0x%08x)\n",
7295 hdmi_audio_clock[i].clock,
7296 hdmi_audio_clock[i].config);
7298 return hdmi_audio_clock[i].config;
7301 static bool intel_eld_uptodate(struct drm_connector *connector,
7302 int reg_eldv, uint32_t bits_eldv,
7303 int reg_elda, uint32_t bits_elda,
7306 struct drm_i915_private *dev_priv = connector->dev->dev_private;
7307 uint8_t *eld = connector->eld;
7310 i = I915_READ(reg_eldv);
7319 i = I915_READ(reg_elda);
7321 I915_WRITE(reg_elda, i);
7323 for (i = 0; i < eld[2]; i++)
7324 if (I915_READ(reg_edid) != *((uint32_t *)eld + i))
7330 static void g4x_write_eld(struct drm_connector *connector,
7331 struct drm_crtc *crtc,
7332 struct drm_display_mode *mode)
7334 struct drm_i915_private *dev_priv = connector->dev->dev_private;
7335 uint8_t *eld = connector->eld;
7340 i = I915_READ(G4X_AUD_VID_DID);
7342 if (i == INTEL_AUDIO_DEVBLC || i == INTEL_AUDIO_DEVCL)
7343 eldv = G4X_ELDV_DEVCL_DEVBLC;
7345 eldv = G4X_ELDV_DEVCTG;
7347 if (intel_eld_uptodate(connector,
7348 G4X_AUD_CNTL_ST, eldv,
7349 G4X_AUD_CNTL_ST, G4X_ELD_ADDR,
7350 G4X_HDMIW_HDMIEDID))
7353 i = I915_READ(G4X_AUD_CNTL_ST);
7354 i &= ~(eldv | G4X_ELD_ADDR);
7355 len = (i >> 9) & 0x1f; /* ELD buffer size */
7356 I915_WRITE(G4X_AUD_CNTL_ST, i);
7361 len = min_t(uint8_t, eld[2], len);
7362 DRM_DEBUG_DRIVER("ELD size %d\n", len);
7363 for (i = 0; i < len; i++)
7364 I915_WRITE(G4X_HDMIW_HDMIEDID, *((uint32_t *)eld + i));
7366 i = I915_READ(G4X_AUD_CNTL_ST);
7368 I915_WRITE(G4X_AUD_CNTL_ST, i);
7371 static void haswell_write_eld(struct drm_connector *connector,
7372 struct drm_crtc *crtc,
7373 struct drm_display_mode *mode)
7375 struct drm_i915_private *dev_priv = connector->dev->dev_private;
7376 uint8_t *eld = connector->eld;
7377 struct drm_device *dev = crtc->dev;
7378 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
7382 int pipe = to_intel_crtc(crtc)->pipe;
7385 int hdmiw_hdmiedid = HSW_AUD_EDID_DATA(pipe);
7386 int aud_cntl_st = HSW_AUD_DIP_ELD_CTRL(pipe);
7387 int aud_config = HSW_AUD_CFG(pipe);
7388 int aud_cntrl_st2 = HSW_AUD_PIN_ELD_CP_VLD;
7391 DRM_DEBUG_DRIVER("HDMI: Haswell Audio initialize....\n");
7393 /* Audio output enable */
7394 DRM_DEBUG_DRIVER("HDMI audio: enable codec\n");
7395 tmp = I915_READ(aud_cntrl_st2);
7396 tmp |= (AUDIO_OUTPUT_ENABLE_A << (pipe * 4));
7397 I915_WRITE(aud_cntrl_st2, tmp);
7399 /* Wait for 1 vertical blank */
7400 intel_wait_for_vblank(dev, pipe);
7402 /* Set ELD valid state */
7403 tmp = I915_READ(aud_cntrl_st2);
7404 DRM_DEBUG_DRIVER("HDMI audio: pin eld vld status=0x%08x\n", tmp);
7405 tmp |= (AUDIO_ELD_VALID_A << (pipe * 4));
7406 I915_WRITE(aud_cntrl_st2, tmp);
7407 tmp = I915_READ(aud_cntrl_st2);
7408 DRM_DEBUG_DRIVER("HDMI audio: eld vld status=0x%08x\n", tmp);
7410 /* Enable HDMI mode */
7411 tmp = I915_READ(aud_config);
7412 DRM_DEBUG_DRIVER("HDMI audio: audio conf: 0x%08x\n", tmp);
7413 /* clear N_programing_enable and N_value_index */
7414 tmp &= ~(AUD_CONFIG_N_VALUE_INDEX | AUD_CONFIG_N_PROG_ENABLE);
7415 I915_WRITE(aud_config, tmp);
7417 DRM_DEBUG_DRIVER("ELD on pipe %c\n", pipe_name(pipe));
7419 eldv = AUDIO_ELD_VALID_A << (pipe * 4);
7420 intel_crtc->eld_vld = true;
7422 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT)) {
7423 DRM_DEBUG_DRIVER("ELD: DisplayPort detected\n");
7424 eld[5] |= (1 << 2); /* Conn_Type, 0x1 = DisplayPort */
7425 I915_WRITE(aud_config, AUD_CONFIG_N_VALUE_INDEX); /* 0x1 = DP */
7427 I915_WRITE(aud_config, audio_config_hdmi_pixel_clock(mode));
7430 if (intel_eld_uptodate(connector,
7431 aud_cntrl_st2, eldv,
7432 aud_cntl_st, IBX_ELD_ADDRESS,
7436 i = I915_READ(aud_cntrl_st2);
7438 I915_WRITE(aud_cntrl_st2, i);
7443 i = I915_READ(aud_cntl_st);
7444 i &= ~IBX_ELD_ADDRESS;
7445 I915_WRITE(aud_cntl_st, i);
7446 i = (i >> 29) & DIP_PORT_SEL_MASK; /* DIP_Port_Select, 0x1 = PortB */
7447 DRM_DEBUG_DRIVER("port num:%d\n", i);
7449 len = min_t(uint8_t, eld[2], 21); /* 84 bytes of hw ELD buffer */
7450 DRM_DEBUG_DRIVER("ELD size %d\n", len);
7451 for (i = 0; i < len; i++)
7452 I915_WRITE(hdmiw_hdmiedid, *((uint32_t *)eld + i));
7454 i = I915_READ(aud_cntrl_st2);
7456 I915_WRITE(aud_cntrl_st2, i);
7460 static void ironlake_write_eld(struct drm_connector *connector,
7461 struct drm_crtc *crtc,
7462 struct drm_display_mode *mode)
7464 struct drm_i915_private *dev_priv = connector->dev->dev_private;
7465 uint8_t *eld = connector->eld;
7473 int pipe = to_intel_crtc(crtc)->pipe;
7475 if (HAS_PCH_IBX(connector->dev)) {
7476 hdmiw_hdmiedid = IBX_HDMIW_HDMIEDID(pipe);
7477 aud_config = IBX_AUD_CFG(pipe);
7478 aud_cntl_st = IBX_AUD_CNTL_ST(pipe);
7479 aud_cntrl_st2 = IBX_AUD_CNTL_ST2;
7480 } else if (IS_VALLEYVIEW(connector->dev)) {
7481 hdmiw_hdmiedid = VLV_HDMIW_HDMIEDID(pipe);
7482 aud_config = VLV_AUD_CFG(pipe);
7483 aud_cntl_st = VLV_AUD_CNTL_ST(pipe);
7484 aud_cntrl_st2 = VLV_AUD_CNTL_ST2;
7486 hdmiw_hdmiedid = CPT_HDMIW_HDMIEDID(pipe);
7487 aud_config = CPT_AUD_CFG(pipe);
7488 aud_cntl_st = CPT_AUD_CNTL_ST(pipe);
7489 aud_cntrl_st2 = CPT_AUD_CNTRL_ST2;
7492 DRM_DEBUG_DRIVER("ELD on pipe %c\n", pipe_name(pipe));
7494 if (IS_VALLEYVIEW(connector->dev)) {
7495 struct intel_encoder *intel_encoder;
7496 struct intel_digital_port *intel_dig_port;
7498 intel_encoder = intel_attached_encoder(connector);
7499 intel_dig_port = enc_to_dig_port(&intel_encoder->base);
7500 i = intel_dig_port->port;
7502 i = I915_READ(aud_cntl_st);
7503 i = (i >> 29) & DIP_PORT_SEL_MASK;
7504 /* DIP_Port_Select, 0x1 = PortB */
7508 DRM_DEBUG_DRIVER("Audio directed to unknown port\n");
7509 /* operate blindly on all ports */
7510 eldv = IBX_ELD_VALIDB;
7511 eldv |= IBX_ELD_VALIDB << 4;
7512 eldv |= IBX_ELD_VALIDB << 8;
7514 DRM_DEBUG_DRIVER("ELD on port %c\n", port_name(i));
7515 eldv = IBX_ELD_VALIDB << ((i - 1) * 4);
7518 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT)) {
7519 DRM_DEBUG_DRIVER("ELD: DisplayPort detected\n");
7520 eld[5] |= (1 << 2); /* Conn_Type, 0x1 = DisplayPort */
7521 I915_WRITE(aud_config, AUD_CONFIG_N_VALUE_INDEX); /* 0x1 = DP */
7523 I915_WRITE(aud_config, audio_config_hdmi_pixel_clock(mode));
7526 if (intel_eld_uptodate(connector,
7527 aud_cntrl_st2, eldv,
7528 aud_cntl_st, IBX_ELD_ADDRESS,
7532 i = I915_READ(aud_cntrl_st2);
7534 I915_WRITE(aud_cntrl_st2, i);
7539 i = I915_READ(aud_cntl_st);
7540 i &= ~IBX_ELD_ADDRESS;
7541 I915_WRITE(aud_cntl_st, i);
7543 len = min_t(uint8_t, eld[2], 21); /* 84 bytes of hw ELD buffer */
7544 DRM_DEBUG_DRIVER("ELD size %d\n", len);
7545 for (i = 0; i < len; i++)
7546 I915_WRITE(hdmiw_hdmiedid, *((uint32_t *)eld + i));
7548 i = I915_READ(aud_cntrl_st2);
7550 I915_WRITE(aud_cntrl_st2, i);
7553 void intel_write_eld(struct drm_encoder *encoder,
7554 struct drm_display_mode *mode)
7556 struct drm_crtc *crtc = encoder->crtc;
7557 struct drm_connector *connector;
7558 struct drm_device *dev = encoder->dev;
7559 struct drm_i915_private *dev_priv = dev->dev_private;
7561 connector = drm_select_eld(encoder, mode);
7565 DRM_DEBUG_DRIVER("ELD on [CONNECTOR:%d:%s], [ENCODER:%d:%s]\n",
7567 drm_get_connector_name(connector),
7568 connector->encoder->base.id,
7569 drm_get_encoder_name(connector->encoder));
7571 connector->eld[6] = drm_av_sync_delay(connector, mode) / 2;
7573 if (dev_priv->display.write_eld)
7574 dev_priv->display.write_eld(connector, crtc, mode);
7577 static void i845_update_cursor(struct drm_crtc *crtc, u32 base)
7579 struct drm_device *dev = crtc->dev;
7580 struct drm_i915_private *dev_priv = dev->dev_private;
7581 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
7582 bool visible = base != 0;
7585 if (intel_crtc->cursor_visible == visible)
7588 cntl = I915_READ(_CURACNTR);
7590 /* On these chipsets we can only modify the base whilst
7591 * the cursor is disabled.
7593 I915_WRITE(_CURABASE, base);
7595 cntl &= ~(CURSOR_FORMAT_MASK);
7596 /* XXX width must be 64, stride 256 => 0x00 << 28 */
7597 cntl |= CURSOR_ENABLE |
7598 CURSOR_GAMMA_ENABLE |
7601 cntl &= ~(CURSOR_ENABLE | CURSOR_GAMMA_ENABLE);
7602 I915_WRITE(_CURACNTR, cntl);
7604 intel_crtc->cursor_visible = visible;
7607 static void i9xx_update_cursor(struct drm_crtc *crtc, u32 base)
7609 struct drm_device *dev = crtc->dev;
7610 struct drm_i915_private *dev_priv = dev->dev_private;
7611 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
7612 int pipe = intel_crtc->pipe;
7613 bool visible = base != 0;
7615 if (intel_crtc->cursor_visible != visible) {
7616 int16_t width = intel_crtc->cursor_width;
7617 uint32_t cntl = I915_READ(CURCNTR(pipe));
7619 cntl &= ~(CURSOR_MODE | MCURSOR_PIPE_SELECT);
7620 cntl |= MCURSOR_GAMMA_ENABLE;
7624 cntl |= CURSOR_MODE_64_ARGB_AX;
7627 cntl |= CURSOR_MODE_128_ARGB_AX;
7630 cntl |= CURSOR_MODE_256_ARGB_AX;
7636 cntl |= pipe << 28; /* Connect to correct pipe */
7638 cntl &= ~(CURSOR_MODE | MCURSOR_GAMMA_ENABLE);
7639 cntl |= CURSOR_MODE_DISABLE;
7641 I915_WRITE(CURCNTR(pipe), cntl);
7643 intel_crtc->cursor_visible = visible;
7645 /* and commit changes on next vblank */
7646 POSTING_READ(CURCNTR(pipe));
7647 I915_WRITE(CURBASE(pipe), base);
7648 POSTING_READ(CURBASE(pipe));
7651 static void ivb_update_cursor(struct drm_crtc *crtc, u32 base)
7653 struct drm_device *dev = crtc->dev;
7654 struct drm_i915_private *dev_priv = dev->dev_private;
7655 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
7656 int pipe = intel_crtc->pipe;
7657 bool visible = base != 0;
7659 if (intel_crtc->cursor_visible != visible) {
7660 int16_t width = intel_crtc->cursor_width;
7661 uint32_t cntl = I915_READ(CURCNTR_IVB(pipe));
7663 cntl &= ~CURSOR_MODE;
7664 cntl |= MCURSOR_GAMMA_ENABLE;
7667 cntl |= CURSOR_MODE_64_ARGB_AX;
7670 cntl |= CURSOR_MODE_128_ARGB_AX;
7673 cntl |= CURSOR_MODE_256_ARGB_AX;
7680 cntl &= ~(CURSOR_MODE | MCURSOR_GAMMA_ENABLE);
7681 cntl |= CURSOR_MODE_DISABLE;
7683 if (IS_HASWELL(dev) || IS_BROADWELL(dev)) {
7684 cntl |= CURSOR_PIPE_CSC_ENABLE;
7685 cntl &= ~CURSOR_TRICKLE_FEED_DISABLE;
7687 I915_WRITE(CURCNTR_IVB(pipe), cntl);
7689 intel_crtc->cursor_visible = visible;
7691 /* and commit changes on next vblank */
7692 POSTING_READ(CURCNTR_IVB(pipe));
7693 I915_WRITE(CURBASE_IVB(pipe), base);
7694 POSTING_READ(CURBASE_IVB(pipe));
7697 /* If no-part of the cursor is visible on the framebuffer, then the GPU may hang... */
7698 static void intel_crtc_update_cursor(struct drm_crtc *crtc,
7701 struct drm_device *dev = crtc->dev;
7702 struct drm_i915_private *dev_priv = dev->dev_private;
7703 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
7704 int pipe = intel_crtc->pipe;
7705 int x = intel_crtc->cursor_x;
7706 int y = intel_crtc->cursor_y;
7707 u32 base = 0, pos = 0;
7711 base = intel_crtc->cursor_addr;
7713 if (x >= intel_crtc->config.pipe_src_w)
7716 if (y >= intel_crtc->config.pipe_src_h)
7720 if (x + intel_crtc->cursor_width <= 0)
7723 pos |= CURSOR_POS_SIGN << CURSOR_X_SHIFT;
7726 pos |= x << CURSOR_X_SHIFT;
7729 if (y + intel_crtc->cursor_height <= 0)
7732 pos |= CURSOR_POS_SIGN << CURSOR_Y_SHIFT;
7735 pos |= y << CURSOR_Y_SHIFT;
7737 visible = base != 0;
7738 if (!visible && !intel_crtc->cursor_visible)
7741 if (IS_IVYBRIDGE(dev) || IS_HASWELL(dev) || IS_BROADWELL(dev)) {
7742 I915_WRITE(CURPOS_IVB(pipe), pos);
7743 ivb_update_cursor(crtc, base);
7745 I915_WRITE(CURPOS(pipe), pos);
7746 if (IS_845G(dev) || IS_I865G(dev))
7747 i845_update_cursor(crtc, base);
7749 i9xx_update_cursor(crtc, base);
7753 static int intel_crtc_cursor_set(struct drm_crtc *crtc,
7754 struct drm_file *file,
7756 uint32_t width, uint32_t height)
7758 struct drm_device *dev = crtc->dev;
7759 struct drm_i915_private *dev_priv = dev->dev_private;
7760 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
7761 struct drm_i915_gem_object *obj;
7766 /* if we want to turn off the cursor ignore width and height */
7768 DRM_DEBUG_KMS("cursor off\n");
7771 mutex_lock(&dev->struct_mutex);
7775 /* Check for which cursor types we support */
7776 if (!((width == 64 && height == 64) ||
7777 (width == 128 && height == 128 && !IS_GEN2(dev)) ||
7778 (width == 256 && height == 256 && !IS_GEN2(dev)))) {
7779 DRM_DEBUG("Cursor dimension not supported\n");
7783 obj = to_intel_bo(drm_gem_object_lookup(dev, file, handle));
7784 if (&obj->base == NULL)
7787 if (obj->base.size < width * height * 4) {
7788 DRM_DEBUG_KMS("buffer is to small\n");
7793 /* we only need to pin inside GTT if cursor is non-phy */
7794 mutex_lock(&dev->struct_mutex);
7795 if (!INTEL_INFO(dev)->cursor_needs_physical) {
7798 if (obj->tiling_mode) {
7799 DRM_DEBUG_KMS("cursor cannot be tiled\n");
7804 /* Note that the w/a also requires 2 PTE of padding following
7805 * the bo. We currently fill all unused PTE with the shadow
7806 * page and so we should always have valid PTE following the
7807 * cursor preventing the VT-d warning.
7810 if (need_vtd_wa(dev))
7811 alignment = 64*1024;
7813 ret = i915_gem_object_pin_to_display_plane(obj, alignment, NULL);
7815 DRM_DEBUG_KMS("failed to move cursor bo into the GTT\n");
7819 ret = i915_gem_object_put_fence(obj);
7821 DRM_DEBUG_KMS("failed to release fence for cursor");
7825 addr = i915_gem_obj_ggtt_offset(obj);
7827 int align = IS_I830(dev) ? 16 * 1024 : 256;
7828 ret = i915_gem_attach_phys_object(dev, obj,
7829 (intel_crtc->pipe == 0) ? I915_GEM_PHYS_CURSOR_0 : I915_GEM_PHYS_CURSOR_1,
7832 DRM_DEBUG_KMS("failed to attach phys object\n");
7835 addr = obj->phys_obj->handle->busaddr;
7839 I915_WRITE(CURSIZE, (height << 12) | width);
7842 if (intel_crtc->cursor_bo) {
7843 if (INTEL_INFO(dev)->cursor_needs_physical) {
7844 if (intel_crtc->cursor_bo != obj)
7845 i915_gem_detach_phys_object(dev, intel_crtc->cursor_bo);
7847 i915_gem_object_unpin_from_display_plane(intel_crtc->cursor_bo);
7848 drm_gem_object_unreference(&intel_crtc->cursor_bo->base);
7851 mutex_unlock(&dev->struct_mutex);
7853 old_width = intel_crtc->cursor_width;
7855 intel_crtc->cursor_addr = addr;
7856 intel_crtc->cursor_bo = obj;
7857 intel_crtc->cursor_width = width;
7858 intel_crtc->cursor_height = height;
7860 if (intel_crtc->active) {
7861 if (old_width != width)
7862 intel_update_watermarks(crtc);
7863 intel_crtc_update_cursor(crtc, intel_crtc->cursor_bo != NULL);
7868 i915_gem_object_unpin_from_display_plane(obj);
7870 mutex_unlock(&dev->struct_mutex);
7872 drm_gem_object_unreference_unlocked(&obj->base);
7876 static int intel_crtc_cursor_move(struct drm_crtc *crtc, int x, int y)
7878 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
7880 intel_crtc->cursor_x = clamp_t(int, x, SHRT_MIN, SHRT_MAX);
7881 intel_crtc->cursor_y = clamp_t(int, y, SHRT_MIN, SHRT_MAX);
7883 if (intel_crtc->active)
7884 intel_crtc_update_cursor(crtc, intel_crtc->cursor_bo != NULL);
7889 static void intel_crtc_gamma_set(struct drm_crtc *crtc, u16 *red, u16 *green,
7890 u16 *blue, uint32_t start, uint32_t size)
7892 int end = (start + size > 256) ? 256 : start + size, i;
7893 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
7895 for (i = start; i < end; i++) {
7896 intel_crtc->lut_r[i] = red[i] >> 8;
7897 intel_crtc->lut_g[i] = green[i] >> 8;
7898 intel_crtc->lut_b[i] = blue[i] >> 8;
7901 intel_crtc_load_lut(crtc);
7904 /* VESA 640x480x72Hz mode to set on the pipe */
7905 static struct drm_display_mode load_detect_mode = {
7906 DRM_MODE("640x480", DRM_MODE_TYPE_DEFAULT, 31500, 640, 664,
7907 704, 832, 0, 480, 489, 491, 520, 0, DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC),
7910 struct drm_framebuffer *
7911 __intel_framebuffer_create(struct drm_device *dev,
7912 struct drm_mode_fb_cmd2 *mode_cmd,
7913 struct drm_i915_gem_object *obj)
7915 struct intel_framebuffer *intel_fb;
7918 intel_fb = kzalloc(sizeof(*intel_fb), GFP_KERNEL);
7920 drm_gem_object_unreference_unlocked(&obj->base);
7921 return ERR_PTR(-ENOMEM);
7924 ret = intel_framebuffer_init(dev, intel_fb, mode_cmd, obj);
7928 return &intel_fb->base;
7930 drm_gem_object_unreference_unlocked(&obj->base);
7933 return ERR_PTR(ret);
7936 static struct drm_framebuffer *
7937 intel_framebuffer_create(struct drm_device *dev,
7938 struct drm_mode_fb_cmd2 *mode_cmd,
7939 struct drm_i915_gem_object *obj)
7941 struct drm_framebuffer *fb;
7944 ret = i915_mutex_lock_interruptible(dev);
7946 return ERR_PTR(ret);
7947 fb = __intel_framebuffer_create(dev, mode_cmd, obj);
7948 mutex_unlock(&dev->struct_mutex);
7954 intel_framebuffer_pitch_for_width(int width, int bpp)
7956 u32 pitch = DIV_ROUND_UP(width * bpp, 8);
7957 return ALIGN(pitch, 64);
7961 intel_framebuffer_size_for_mode(struct drm_display_mode *mode, int bpp)
7963 u32 pitch = intel_framebuffer_pitch_for_width(mode->hdisplay, bpp);
7964 return ALIGN(pitch * mode->vdisplay, PAGE_SIZE);
7967 static struct drm_framebuffer *
7968 intel_framebuffer_create_for_mode(struct drm_device *dev,
7969 struct drm_display_mode *mode,
7972 struct drm_i915_gem_object *obj;
7973 struct drm_mode_fb_cmd2 mode_cmd = { 0 };
7975 obj = i915_gem_alloc_object(dev,
7976 intel_framebuffer_size_for_mode(mode, bpp));
7978 return ERR_PTR(-ENOMEM);
7980 mode_cmd.width = mode->hdisplay;
7981 mode_cmd.height = mode->vdisplay;
7982 mode_cmd.pitches[0] = intel_framebuffer_pitch_for_width(mode_cmd.width,
7984 mode_cmd.pixel_format = drm_mode_legacy_fb_format(bpp, depth);
7986 return intel_framebuffer_create(dev, &mode_cmd, obj);
7989 static struct drm_framebuffer *
7990 mode_fits_in_fbdev(struct drm_device *dev,
7991 struct drm_display_mode *mode)
7993 #ifdef CONFIG_DRM_I915_FBDEV
7994 struct drm_i915_private *dev_priv = dev->dev_private;
7995 struct drm_i915_gem_object *obj;
7996 struct drm_framebuffer *fb;
7998 if (!dev_priv->fbdev)
8001 if (!dev_priv->fbdev->fb)
8004 obj = dev_priv->fbdev->fb->obj;
8007 fb = &dev_priv->fbdev->fb->base;
8008 if (fb->pitches[0] < intel_framebuffer_pitch_for_width(mode->hdisplay,
8009 fb->bits_per_pixel))
8012 if (obj->base.size < mode->vdisplay * fb->pitches[0])
8021 bool intel_get_load_detect_pipe(struct drm_connector *connector,
8022 struct drm_display_mode *mode,
8023 struct intel_load_detect_pipe *old)
8025 struct intel_crtc *intel_crtc;
8026 struct intel_encoder *intel_encoder =
8027 intel_attached_encoder(connector);
8028 struct drm_crtc *possible_crtc;
8029 struct drm_encoder *encoder = &intel_encoder->base;
8030 struct drm_crtc *crtc = NULL;
8031 struct drm_device *dev = encoder->dev;
8032 struct drm_framebuffer *fb;
8035 DRM_DEBUG_KMS("[CONNECTOR:%d:%s], [ENCODER:%d:%s]\n",
8036 connector->base.id, drm_get_connector_name(connector),
8037 encoder->base.id, drm_get_encoder_name(encoder));
8040 * Algorithm gets a little messy:
8042 * - if the connector already has an assigned crtc, use it (but make
8043 * sure it's on first)
8045 * - try to find the first unused crtc that can drive this connector,
8046 * and use that if we find one
8049 /* See if we already have a CRTC for this connector */
8050 if (encoder->crtc) {
8051 crtc = encoder->crtc;
8053 mutex_lock(&crtc->mutex);
8055 old->dpms_mode = connector->dpms;
8056 old->load_detect_temp = false;
8058 /* Make sure the crtc and connector are running */
8059 if (connector->dpms != DRM_MODE_DPMS_ON)
8060 connector->funcs->dpms(connector, DRM_MODE_DPMS_ON);
8065 /* Find an unused one (if possible) */
8066 list_for_each_entry(possible_crtc, &dev->mode_config.crtc_list, head) {
8068 if (!(encoder->possible_crtcs & (1 << i)))
8070 if (!possible_crtc->enabled) {
8071 crtc = possible_crtc;
8077 * If we didn't find an unused CRTC, don't use any.
8080 DRM_DEBUG_KMS("no pipe available for load-detect\n");
8084 mutex_lock(&crtc->mutex);
8085 intel_encoder->new_crtc = to_intel_crtc(crtc);
8086 to_intel_connector(connector)->new_encoder = intel_encoder;
8088 intel_crtc = to_intel_crtc(crtc);
8089 intel_crtc->new_enabled = true;
8090 intel_crtc->new_config = &intel_crtc->config;
8091 old->dpms_mode = connector->dpms;
8092 old->load_detect_temp = true;
8093 old->release_fb = NULL;
8096 mode = &load_detect_mode;
8098 /* We need a framebuffer large enough to accommodate all accesses
8099 * that the plane may generate whilst we perform load detection.
8100 * We can not rely on the fbcon either being present (we get called
8101 * during its initialisation to detect all boot displays, or it may
8102 * not even exist) or that it is large enough to satisfy the
8105 fb = mode_fits_in_fbdev(dev, mode);
8107 DRM_DEBUG_KMS("creating tmp fb for load-detection\n");
8108 fb = intel_framebuffer_create_for_mode(dev, mode, 24, 32);
8109 old->release_fb = fb;
8111 DRM_DEBUG_KMS("reusing fbdev for load-detection framebuffer\n");
8113 DRM_DEBUG_KMS("failed to allocate framebuffer for load-detection\n");
8117 if (intel_set_mode(crtc, mode, 0, 0, fb)) {
8118 DRM_DEBUG_KMS("failed to set mode on load-detect pipe\n");
8119 if (old->release_fb)
8120 old->release_fb->funcs->destroy(old->release_fb);
8124 /* let the connector get through one full cycle before testing */
8125 intel_wait_for_vblank(dev, intel_crtc->pipe);
8129 intel_crtc->new_enabled = crtc->enabled;
8130 if (intel_crtc->new_enabled)
8131 intel_crtc->new_config = &intel_crtc->config;
8133 intel_crtc->new_config = NULL;
8134 mutex_unlock(&crtc->mutex);
8138 void intel_release_load_detect_pipe(struct drm_connector *connector,
8139 struct intel_load_detect_pipe *old)
8141 struct intel_encoder *intel_encoder =
8142 intel_attached_encoder(connector);
8143 struct drm_encoder *encoder = &intel_encoder->base;
8144 struct drm_crtc *crtc = encoder->crtc;
8145 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
8147 DRM_DEBUG_KMS("[CONNECTOR:%d:%s], [ENCODER:%d:%s]\n",
8148 connector->base.id, drm_get_connector_name(connector),
8149 encoder->base.id, drm_get_encoder_name(encoder));
8151 if (old->load_detect_temp) {
8152 to_intel_connector(connector)->new_encoder = NULL;
8153 intel_encoder->new_crtc = NULL;
8154 intel_crtc->new_enabled = false;
8155 intel_crtc->new_config = NULL;
8156 intel_set_mode(crtc, NULL, 0, 0, NULL);
8158 if (old->release_fb) {
8159 drm_framebuffer_unregister_private(old->release_fb);
8160 drm_framebuffer_unreference(old->release_fb);
8163 mutex_unlock(&crtc->mutex);
8167 /* Switch crtc and encoder back off if necessary */
8168 if (old->dpms_mode != DRM_MODE_DPMS_ON)
8169 connector->funcs->dpms(connector, old->dpms_mode);
8171 mutex_unlock(&crtc->mutex);
8174 static int i9xx_pll_refclk(struct drm_device *dev,
8175 const struct intel_crtc_config *pipe_config)
8177 struct drm_i915_private *dev_priv = dev->dev_private;
8178 u32 dpll = pipe_config->dpll_hw_state.dpll;
8180 if ((dpll & PLL_REF_INPUT_MASK) == PLLB_REF_INPUT_SPREADSPECTRUMIN)
8181 return dev_priv->vbt.lvds_ssc_freq;
8182 else if (HAS_PCH_SPLIT(dev))
8184 else if (!IS_GEN2(dev))
8190 /* Returns the clock of the currently programmed mode of the given pipe. */
8191 static void i9xx_crtc_clock_get(struct intel_crtc *crtc,
8192 struct intel_crtc_config *pipe_config)
8194 struct drm_device *dev = crtc->base.dev;
8195 struct drm_i915_private *dev_priv = dev->dev_private;
8196 int pipe = pipe_config->cpu_transcoder;
8197 u32 dpll = pipe_config->dpll_hw_state.dpll;
8199 intel_clock_t clock;
8200 int refclk = i9xx_pll_refclk(dev, pipe_config);
8202 if ((dpll & DISPLAY_RATE_SELECT_FPA1) == 0)
8203 fp = pipe_config->dpll_hw_state.fp0;
8205 fp = pipe_config->dpll_hw_state.fp1;
8207 clock.m1 = (fp & FP_M1_DIV_MASK) >> FP_M1_DIV_SHIFT;
8208 if (IS_PINEVIEW(dev)) {
8209 clock.n = ffs((fp & FP_N_PINEVIEW_DIV_MASK) >> FP_N_DIV_SHIFT) - 1;
8210 clock.m2 = (fp & FP_M2_PINEVIEW_DIV_MASK) >> FP_M2_DIV_SHIFT;
8212 clock.n = (fp & FP_N_DIV_MASK) >> FP_N_DIV_SHIFT;
8213 clock.m2 = (fp & FP_M2_DIV_MASK) >> FP_M2_DIV_SHIFT;
8216 if (!IS_GEN2(dev)) {
8217 if (IS_PINEVIEW(dev))
8218 clock.p1 = ffs((dpll & DPLL_FPA01_P1_POST_DIV_MASK_PINEVIEW) >>
8219 DPLL_FPA01_P1_POST_DIV_SHIFT_PINEVIEW);
8221 clock.p1 = ffs((dpll & DPLL_FPA01_P1_POST_DIV_MASK) >>
8222 DPLL_FPA01_P1_POST_DIV_SHIFT);
8224 switch (dpll & DPLL_MODE_MASK) {
8225 case DPLLB_MODE_DAC_SERIAL:
8226 clock.p2 = dpll & DPLL_DAC_SERIAL_P2_CLOCK_DIV_5 ?
8229 case DPLLB_MODE_LVDS:
8230 clock.p2 = dpll & DPLLB_LVDS_P2_CLOCK_DIV_7 ?
8234 DRM_DEBUG_KMS("Unknown DPLL mode %08x in programmed "
8235 "mode\n", (int)(dpll & DPLL_MODE_MASK));
8239 if (IS_PINEVIEW(dev))
8240 pineview_clock(refclk, &clock);
8242 i9xx_clock(refclk, &clock);
8244 u32 lvds = IS_I830(dev) ? 0 : I915_READ(LVDS);
8245 bool is_lvds = (pipe == 1) && (lvds & LVDS_PORT_EN);
8248 clock.p1 = ffs((dpll & DPLL_FPA01_P1_POST_DIV_MASK_I830_LVDS) >>
8249 DPLL_FPA01_P1_POST_DIV_SHIFT);
8251 if (lvds & LVDS_CLKB_POWER_UP)
8256 if (dpll & PLL_P1_DIVIDE_BY_TWO)
8259 clock.p1 = ((dpll & DPLL_FPA01_P1_POST_DIV_MASK_I830) >>
8260 DPLL_FPA01_P1_POST_DIV_SHIFT) + 2;
8262 if (dpll & PLL_P2_DIVIDE_BY_4)
8268 i9xx_clock(refclk, &clock);
8272 * This value includes pixel_multiplier. We will use
8273 * port_clock to compute adjusted_mode.crtc_clock in the
8274 * encoder's get_config() function.
8276 pipe_config->port_clock = clock.dot;
8279 int intel_dotclock_calculate(int link_freq,
8280 const struct intel_link_m_n *m_n)
8283 * The calculation for the data clock is:
8284 * pixel_clock = ((m/n)*(link_clock * nr_lanes))/bpp
8285 * But we want to avoid losing precison if possible, so:
8286 * pixel_clock = ((m * link_clock * nr_lanes)/(n*bpp))
8288 * and the link clock is simpler:
8289 * link_clock = (m * link_clock) / n
8295 return div_u64((u64)m_n->link_m * link_freq, m_n->link_n);
8298 static void ironlake_pch_clock_get(struct intel_crtc *crtc,
8299 struct intel_crtc_config *pipe_config)
8301 struct drm_device *dev = crtc->base.dev;
8303 /* read out port_clock from the DPLL */
8304 i9xx_crtc_clock_get(crtc, pipe_config);
8307 * This value does not include pixel_multiplier.
8308 * We will check that port_clock and adjusted_mode.crtc_clock
8309 * agree once we know their relationship in the encoder's
8310 * get_config() function.
8312 pipe_config->adjusted_mode.crtc_clock =
8313 intel_dotclock_calculate(intel_fdi_link_freq(dev) * 10000,
8314 &pipe_config->fdi_m_n);
8317 /** Returns the currently programmed mode of the given pipe. */
8318 struct drm_display_mode *intel_crtc_mode_get(struct drm_device *dev,
8319 struct drm_crtc *crtc)
8321 struct drm_i915_private *dev_priv = dev->dev_private;
8322 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
8323 enum transcoder cpu_transcoder = intel_crtc->config.cpu_transcoder;
8324 struct drm_display_mode *mode;
8325 struct intel_crtc_config pipe_config;
8326 int htot = I915_READ(HTOTAL(cpu_transcoder));
8327 int hsync = I915_READ(HSYNC(cpu_transcoder));
8328 int vtot = I915_READ(VTOTAL(cpu_transcoder));
8329 int vsync = I915_READ(VSYNC(cpu_transcoder));
8330 enum pipe pipe = intel_crtc->pipe;
8332 mode = kzalloc(sizeof(*mode), GFP_KERNEL);
8337 * Construct a pipe_config sufficient for getting the clock info
8338 * back out of crtc_clock_get.
8340 * Note, if LVDS ever uses a non-1 pixel multiplier, we'll need
8341 * to use a real value here instead.
8343 pipe_config.cpu_transcoder = (enum transcoder) pipe;
8344 pipe_config.pixel_multiplier = 1;
8345 pipe_config.dpll_hw_state.dpll = I915_READ(DPLL(pipe));
8346 pipe_config.dpll_hw_state.fp0 = I915_READ(FP0(pipe));
8347 pipe_config.dpll_hw_state.fp1 = I915_READ(FP1(pipe));
8348 i9xx_crtc_clock_get(intel_crtc, &pipe_config);
8350 mode->clock = pipe_config.port_clock / pipe_config.pixel_multiplier;
8351 mode->hdisplay = (htot & 0xffff) + 1;
8352 mode->htotal = ((htot & 0xffff0000) >> 16) + 1;
8353 mode->hsync_start = (hsync & 0xffff) + 1;
8354 mode->hsync_end = ((hsync & 0xffff0000) >> 16) + 1;
8355 mode->vdisplay = (vtot & 0xffff) + 1;
8356 mode->vtotal = ((vtot & 0xffff0000) >> 16) + 1;
8357 mode->vsync_start = (vsync & 0xffff) + 1;
8358 mode->vsync_end = ((vsync & 0xffff0000) >> 16) + 1;
8360 drm_mode_set_name(mode);
8365 static void intel_increase_pllclock(struct drm_crtc *crtc)
8367 struct drm_device *dev = crtc->dev;
8368 struct drm_i915_private *dev_priv = dev->dev_private;
8369 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
8370 int pipe = intel_crtc->pipe;
8371 int dpll_reg = DPLL(pipe);
8374 if (HAS_PCH_SPLIT(dev))
8377 if (!dev_priv->lvds_downclock_avail)
8380 dpll = I915_READ(dpll_reg);
8381 if (!HAS_PIPE_CXSR(dev) && (dpll & DISPLAY_RATE_SELECT_FPA1)) {
8382 DRM_DEBUG_DRIVER("upclocking LVDS\n");
8384 assert_panel_unlocked(dev_priv, pipe);
8386 dpll &= ~DISPLAY_RATE_SELECT_FPA1;
8387 I915_WRITE(dpll_reg, dpll);
8388 intel_wait_for_vblank(dev, pipe);
8390 dpll = I915_READ(dpll_reg);
8391 if (dpll & DISPLAY_RATE_SELECT_FPA1)
8392 DRM_DEBUG_DRIVER("failed to upclock LVDS!\n");
8396 static void intel_decrease_pllclock(struct drm_crtc *crtc)
8398 struct drm_device *dev = crtc->dev;
8399 struct drm_i915_private *dev_priv = dev->dev_private;
8400 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
8402 if (HAS_PCH_SPLIT(dev))
8405 if (!dev_priv->lvds_downclock_avail)
8409 * Since this is called by a timer, we should never get here in
8412 if (!HAS_PIPE_CXSR(dev) && intel_crtc->lowfreq_avail) {
8413 int pipe = intel_crtc->pipe;
8414 int dpll_reg = DPLL(pipe);
8417 DRM_DEBUG_DRIVER("downclocking LVDS\n");
8419 assert_panel_unlocked(dev_priv, pipe);
8421 dpll = I915_READ(dpll_reg);
8422 dpll |= DISPLAY_RATE_SELECT_FPA1;
8423 I915_WRITE(dpll_reg, dpll);
8424 intel_wait_for_vblank(dev, pipe);
8425 dpll = I915_READ(dpll_reg);
8426 if (!(dpll & DISPLAY_RATE_SELECT_FPA1))
8427 DRM_DEBUG_DRIVER("failed to downclock LVDS!\n");
8432 void intel_mark_busy(struct drm_device *dev)
8434 struct drm_i915_private *dev_priv = dev->dev_private;
8436 if (dev_priv->mm.busy)
8439 intel_runtime_pm_get(dev_priv);
8440 i915_update_gfx_val(dev_priv);
8441 dev_priv->mm.busy = true;
8444 void intel_mark_idle(struct drm_device *dev)
8446 struct drm_i915_private *dev_priv = dev->dev_private;
8447 struct drm_crtc *crtc;
8449 if (!dev_priv->mm.busy)
8452 dev_priv->mm.busy = false;
8454 if (!i915.powersave)
8457 list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
8458 if (!crtc->primary->fb)
8461 intel_decrease_pllclock(crtc);
8464 if (INTEL_INFO(dev)->gen >= 6)
8465 gen6_rps_idle(dev->dev_private);
8468 intel_runtime_pm_put(dev_priv);
8471 void intel_mark_fb_busy(struct drm_i915_gem_object *obj,
8472 struct intel_ring_buffer *ring)
8474 struct drm_device *dev = obj->base.dev;
8475 struct drm_crtc *crtc;
8477 if (!i915.powersave)
8480 list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
8481 if (!crtc->primary->fb)
8484 if (to_intel_framebuffer(crtc->primary->fb)->obj != obj)
8487 intel_increase_pllclock(crtc);
8488 if (ring && intel_fbc_enabled(dev))
8489 ring->fbc_dirty = true;
8493 static void intel_crtc_destroy(struct drm_crtc *crtc)
8495 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
8496 struct drm_device *dev = crtc->dev;
8497 struct intel_unpin_work *work;
8498 unsigned long flags;
8500 spin_lock_irqsave(&dev->event_lock, flags);
8501 work = intel_crtc->unpin_work;
8502 intel_crtc->unpin_work = NULL;
8503 spin_unlock_irqrestore(&dev->event_lock, flags);
8506 cancel_work_sync(&work->work);
8510 intel_crtc_cursor_set(crtc, NULL, 0, 0, 0);
8512 drm_crtc_cleanup(crtc);
8517 static void intel_unpin_work_fn(struct work_struct *__work)
8519 struct intel_unpin_work *work =
8520 container_of(__work, struct intel_unpin_work, work);
8521 struct drm_device *dev = work->crtc->dev;
8523 mutex_lock(&dev->struct_mutex);
8524 intel_unpin_fb_obj(work->old_fb_obj);
8525 drm_gem_object_unreference(&work->pending_flip_obj->base);
8526 drm_gem_object_unreference(&work->old_fb_obj->base);
8528 intel_update_fbc(dev);
8529 mutex_unlock(&dev->struct_mutex);
8531 BUG_ON(atomic_read(&to_intel_crtc(work->crtc)->unpin_work_count) == 0);
8532 atomic_dec(&to_intel_crtc(work->crtc)->unpin_work_count);
8537 static void do_intel_finish_page_flip(struct drm_device *dev,
8538 struct drm_crtc *crtc)
8540 struct drm_i915_private *dev_priv = dev->dev_private;
8541 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
8542 struct intel_unpin_work *work;
8543 unsigned long flags;
8545 /* Ignore early vblank irqs */
8546 if (intel_crtc == NULL)
8549 spin_lock_irqsave(&dev->event_lock, flags);
8550 work = intel_crtc->unpin_work;
8552 /* Ensure we don't miss a work->pending update ... */
8555 if (work == NULL || atomic_read(&work->pending) < INTEL_FLIP_COMPLETE) {
8556 spin_unlock_irqrestore(&dev->event_lock, flags);
8560 /* and that the unpin work is consistent wrt ->pending. */
8563 intel_crtc->unpin_work = NULL;
8566 drm_send_vblank_event(dev, intel_crtc->pipe, work->event);
8568 drm_vblank_put(dev, intel_crtc->pipe);
8570 spin_unlock_irqrestore(&dev->event_lock, flags);
8572 wake_up_all(&dev_priv->pending_flip_queue);
8574 queue_work(dev_priv->wq, &work->work);
8576 trace_i915_flip_complete(intel_crtc->plane, work->pending_flip_obj);
8579 void intel_finish_page_flip(struct drm_device *dev, int pipe)
8581 struct drm_i915_private *dev_priv = dev->dev_private;
8582 struct drm_crtc *crtc = dev_priv->pipe_to_crtc_mapping[pipe];
8584 do_intel_finish_page_flip(dev, crtc);
8587 void intel_finish_page_flip_plane(struct drm_device *dev, int plane)
8589 struct drm_i915_private *dev_priv = dev->dev_private;
8590 struct drm_crtc *crtc = dev_priv->plane_to_crtc_mapping[plane];
8592 do_intel_finish_page_flip(dev, crtc);
8595 void intel_prepare_page_flip(struct drm_device *dev, int plane)
8597 struct drm_i915_private *dev_priv = dev->dev_private;
8598 struct intel_crtc *intel_crtc =
8599 to_intel_crtc(dev_priv->plane_to_crtc_mapping[plane]);
8600 unsigned long flags;
8602 /* NB: An MMIO update of the plane base pointer will also
8603 * generate a page-flip completion irq, i.e. every modeset
8604 * is also accompanied by a spurious intel_prepare_page_flip().
8606 spin_lock_irqsave(&dev->event_lock, flags);
8607 if (intel_crtc->unpin_work)
8608 atomic_inc_not_zero(&intel_crtc->unpin_work->pending);
8609 spin_unlock_irqrestore(&dev->event_lock, flags);
8612 inline static void intel_mark_page_flip_active(struct intel_crtc *intel_crtc)
8614 /* Ensure that the work item is consistent when activating it ... */
8616 atomic_set(&intel_crtc->unpin_work->pending, INTEL_FLIP_PENDING);
8617 /* and that it is marked active as soon as the irq could fire. */
8621 static int intel_gen2_queue_flip(struct drm_device *dev,
8622 struct drm_crtc *crtc,
8623 struct drm_framebuffer *fb,
8624 struct drm_i915_gem_object *obj,
8627 struct drm_i915_private *dev_priv = dev->dev_private;
8628 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
8630 struct intel_ring_buffer *ring = &dev_priv->ring[RCS];
8633 ret = intel_pin_and_fence_fb_obj(dev, obj, ring);
8637 ret = intel_ring_begin(ring, 6);
8641 /* Can't queue multiple flips, so wait for the previous
8642 * one to finish before executing the next.
8644 if (intel_crtc->plane)
8645 flip_mask = MI_WAIT_FOR_PLANE_B_FLIP;
8647 flip_mask = MI_WAIT_FOR_PLANE_A_FLIP;
8648 intel_ring_emit(ring, MI_WAIT_FOR_EVENT | flip_mask);
8649 intel_ring_emit(ring, MI_NOOP);
8650 intel_ring_emit(ring, MI_DISPLAY_FLIP |
8651 MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
8652 intel_ring_emit(ring, fb->pitches[0]);
8653 intel_ring_emit(ring, i915_gem_obj_ggtt_offset(obj) + intel_crtc->dspaddr_offset);
8654 intel_ring_emit(ring, 0); /* aux display base address, unused */
8656 intel_mark_page_flip_active(intel_crtc);
8657 __intel_ring_advance(ring);
8661 intel_unpin_fb_obj(obj);
8666 static int intel_gen3_queue_flip(struct drm_device *dev,
8667 struct drm_crtc *crtc,
8668 struct drm_framebuffer *fb,
8669 struct drm_i915_gem_object *obj,
8672 struct drm_i915_private *dev_priv = dev->dev_private;
8673 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
8675 struct intel_ring_buffer *ring = &dev_priv->ring[RCS];
8678 ret = intel_pin_and_fence_fb_obj(dev, obj, ring);
8682 ret = intel_ring_begin(ring, 6);
8686 if (intel_crtc->plane)
8687 flip_mask = MI_WAIT_FOR_PLANE_B_FLIP;
8689 flip_mask = MI_WAIT_FOR_PLANE_A_FLIP;
8690 intel_ring_emit(ring, MI_WAIT_FOR_EVENT | flip_mask);
8691 intel_ring_emit(ring, MI_NOOP);
8692 intel_ring_emit(ring, MI_DISPLAY_FLIP_I915 |
8693 MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
8694 intel_ring_emit(ring, fb->pitches[0]);
8695 intel_ring_emit(ring, i915_gem_obj_ggtt_offset(obj) + intel_crtc->dspaddr_offset);
8696 intel_ring_emit(ring, MI_NOOP);
8698 intel_mark_page_flip_active(intel_crtc);
8699 __intel_ring_advance(ring);
8703 intel_unpin_fb_obj(obj);
8708 static int intel_gen4_queue_flip(struct drm_device *dev,
8709 struct drm_crtc *crtc,
8710 struct drm_framebuffer *fb,
8711 struct drm_i915_gem_object *obj,
8714 struct drm_i915_private *dev_priv = dev->dev_private;
8715 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
8716 uint32_t pf, pipesrc;
8717 struct intel_ring_buffer *ring = &dev_priv->ring[RCS];
8720 ret = intel_pin_and_fence_fb_obj(dev, obj, ring);
8724 ret = intel_ring_begin(ring, 4);
8728 /* i965+ uses the linear or tiled offsets from the
8729 * Display Registers (which do not change across a page-flip)
8730 * so we need only reprogram the base address.
8732 intel_ring_emit(ring, MI_DISPLAY_FLIP |
8733 MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
8734 intel_ring_emit(ring, fb->pitches[0]);
8735 intel_ring_emit(ring,
8736 (i915_gem_obj_ggtt_offset(obj) + intel_crtc->dspaddr_offset) |
8739 /* XXX Enabling the panel-fitter across page-flip is so far
8740 * untested on non-native modes, so ignore it for now.
8741 * pf = I915_READ(pipe == 0 ? PFA_CTL_1 : PFB_CTL_1) & PF_ENABLE;
8744 pipesrc = I915_READ(PIPESRC(intel_crtc->pipe)) & 0x0fff0fff;
8745 intel_ring_emit(ring, pf | pipesrc);
8747 intel_mark_page_flip_active(intel_crtc);
8748 __intel_ring_advance(ring);
8752 intel_unpin_fb_obj(obj);
8757 static int intel_gen6_queue_flip(struct drm_device *dev,
8758 struct drm_crtc *crtc,
8759 struct drm_framebuffer *fb,
8760 struct drm_i915_gem_object *obj,
8763 struct drm_i915_private *dev_priv = dev->dev_private;
8764 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
8765 struct intel_ring_buffer *ring = &dev_priv->ring[RCS];
8766 uint32_t pf, pipesrc;
8769 ret = intel_pin_and_fence_fb_obj(dev, obj, ring);
8773 ret = intel_ring_begin(ring, 4);
8777 intel_ring_emit(ring, MI_DISPLAY_FLIP |
8778 MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
8779 intel_ring_emit(ring, fb->pitches[0] | obj->tiling_mode);
8780 intel_ring_emit(ring, i915_gem_obj_ggtt_offset(obj) + intel_crtc->dspaddr_offset);
8782 /* Contrary to the suggestions in the documentation,
8783 * "Enable Panel Fitter" does not seem to be required when page
8784 * flipping with a non-native mode, and worse causes a normal
8786 * pf = I915_READ(PF_CTL(intel_crtc->pipe)) & PF_ENABLE;
8789 pipesrc = I915_READ(PIPESRC(intel_crtc->pipe)) & 0x0fff0fff;
8790 intel_ring_emit(ring, pf | pipesrc);
8792 intel_mark_page_flip_active(intel_crtc);
8793 __intel_ring_advance(ring);
8797 intel_unpin_fb_obj(obj);
8802 static int intel_gen7_queue_flip(struct drm_device *dev,
8803 struct drm_crtc *crtc,
8804 struct drm_framebuffer *fb,
8805 struct drm_i915_gem_object *obj,
8808 struct drm_i915_private *dev_priv = dev->dev_private;
8809 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
8810 struct intel_ring_buffer *ring;
8811 uint32_t plane_bit = 0;
8815 if (IS_VALLEYVIEW(dev) || ring == NULL || ring->id != RCS)
8816 ring = &dev_priv->ring[BCS];
8818 ret = intel_pin_and_fence_fb_obj(dev, obj, ring);
8822 switch(intel_crtc->plane) {
8824 plane_bit = MI_DISPLAY_FLIP_IVB_PLANE_A;
8827 plane_bit = MI_DISPLAY_FLIP_IVB_PLANE_B;
8830 plane_bit = MI_DISPLAY_FLIP_IVB_PLANE_C;
8833 WARN_ONCE(1, "unknown plane in flip command\n");
8839 if (ring->id == RCS)
8843 * BSpec MI_DISPLAY_FLIP for IVB:
8844 * "The full packet must be contained within the same cache line."
8846 * Currently the LRI+SRM+MI_DISPLAY_FLIP all fit within the same
8847 * cacheline, if we ever start emitting more commands before
8848 * the MI_DISPLAY_FLIP we may need to first emit everything else,
8849 * then do the cacheline alignment, and finally emit the
8852 ret = intel_ring_cacheline_align(ring);
8856 ret = intel_ring_begin(ring, len);
8860 /* Unmask the flip-done completion message. Note that the bspec says that
8861 * we should do this for both the BCS and RCS, and that we must not unmask
8862 * more than one flip event at any time (or ensure that one flip message
8863 * can be sent by waiting for flip-done prior to queueing new flips).
8864 * Experimentation says that BCS works despite DERRMR masking all
8865 * flip-done completion events and that unmasking all planes at once
8866 * for the RCS also doesn't appear to drop events. Setting the DERRMR
8867 * to zero does lead to lockups within MI_DISPLAY_FLIP.
8869 if (ring->id == RCS) {
8870 intel_ring_emit(ring, MI_LOAD_REGISTER_IMM(1));
8871 intel_ring_emit(ring, DERRMR);
8872 intel_ring_emit(ring, ~(DERRMR_PIPEA_PRI_FLIP_DONE |
8873 DERRMR_PIPEB_PRI_FLIP_DONE |
8874 DERRMR_PIPEC_PRI_FLIP_DONE));
8875 intel_ring_emit(ring, MI_STORE_REGISTER_MEM(1) |
8876 MI_SRM_LRM_GLOBAL_GTT);
8877 intel_ring_emit(ring, DERRMR);
8878 intel_ring_emit(ring, ring->scratch.gtt_offset + 256);
8881 intel_ring_emit(ring, MI_DISPLAY_FLIP_I915 | plane_bit);
8882 intel_ring_emit(ring, (fb->pitches[0] | obj->tiling_mode));
8883 intel_ring_emit(ring, i915_gem_obj_ggtt_offset(obj) + intel_crtc->dspaddr_offset);
8884 intel_ring_emit(ring, (MI_NOOP));
8886 intel_mark_page_flip_active(intel_crtc);
8887 __intel_ring_advance(ring);
8891 intel_unpin_fb_obj(obj);
8896 static int intel_default_queue_flip(struct drm_device *dev,
8897 struct drm_crtc *crtc,
8898 struct drm_framebuffer *fb,
8899 struct drm_i915_gem_object *obj,
8905 static int intel_crtc_page_flip(struct drm_crtc *crtc,
8906 struct drm_framebuffer *fb,
8907 struct drm_pending_vblank_event *event,
8908 uint32_t page_flip_flags)
8910 struct drm_device *dev = crtc->dev;
8911 struct drm_i915_private *dev_priv = dev->dev_private;
8912 struct drm_framebuffer *old_fb = crtc->primary->fb;
8913 struct drm_i915_gem_object *obj = to_intel_framebuffer(fb)->obj;
8914 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
8915 struct intel_unpin_work *work;
8916 unsigned long flags;
8919 /* Can't change pixel format via MI display flips. */
8920 if (fb->pixel_format != crtc->primary->fb->pixel_format)
8924 * TILEOFF/LINOFF registers can't be changed via MI display flips.
8925 * Note that pitch changes could also affect these register.
8927 if (INTEL_INFO(dev)->gen > 3 &&
8928 (fb->offsets[0] != crtc->primary->fb->offsets[0] ||
8929 fb->pitches[0] != crtc->primary->fb->pitches[0]))
8932 if (i915_terminally_wedged(&dev_priv->gpu_error))
8935 work = kzalloc(sizeof(*work), GFP_KERNEL);
8939 work->event = event;
8941 work->old_fb_obj = to_intel_framebuffer(old_fb)->obj;
8942 INIT_WORK(&work->work, intel_unpin_work_fn);
8944 ret = drm_vblank_get(dev, intel_crtc->pipe);
8948 /* We borrow the event spin lock for protecting unpin_work */
8949 spin_lock_irqsave(&dev->event_lock, flags);
8950 if (intel_crtc->unpin_work) {
8951 spin_unlock_irqrestore(&dev->event_lock, flags);
8953 drm_vblank_put(dev, intel_crtc->pipe);
8955 DRM_DEBUG_DRIVER("flip queue: crtc already busy\n");
8958 intel_crtc->unpin_work = work;
8959 spin_unlock_irqrestore(&dev->event_lock, flags);
8961 if (atomic_read(&intel_crtc->unpin_work_count) >= 2)
8962 flush_workqueue(dev_priv->wq);
8964 ret = i915_mutex_lock_interruptible(dev);
8968 /* Reference the objects for the scheduled work. */
8969 drm_gem_object_reference(&work->old_fb_obj->base);
8970 drm_gem_object_reference(&obj->base);
8972 crtc->primary->fb = fb;
8974 work->pending_flip_obj = obj;
8976 work->enable_stall_check = true;
8978 atomic_inc(&intel_crtc->unpin_work_count);
8979 intel_crtc->reset_counter = atomic_read(&dev_priv->gpu_error.reset_counter);
8981 ret = dev_priv->display.queue_flip(dev, crtc, fb, obj, page_flip_flags);
8983 goto cleanup_pending;
8985 intel_disable_fbc(dev);
8986 intel_mark_fb_busy(obj, NULL);
8987 mutex_unlock(&dev->struct_mutex);
8989 trace_i915_flip_request(intel_crtc->plane, obj);
8994 atomic_dec(&intel_crtc->unpin_work_count);
8995 crtc->primary->fb = old_fb;
8996 drm_gem_object_unreference(&work->old_fb_obj->base);
8997 drm_gem_object_unreference(&obj->base);
8998 mutex_unlock(&dev->struct_mutex);
9001 spin_lock_irqsave(&dev->event_lock, flags);
9002 intel_crtc->unpin_work = NULL;
9003 spin_unlock_irqrestore(&dev->event_lock, flags);
9005 drm_vblank_put(dev, intel_crtc->pipe);
9011 intel_crtc_wait_for_pending_flips(crtc);
9012 ret = intel_pipe_set_base(crtc, crtc->x, crtc->y, fb);
9013 if (ret == 0 && event)
9014 drm_send_vblank_event(dev, intel_crtc->pipe, event);
9019 static struct drm_crtc_helper_funcs intel_helper_funcs = {
9020 .mode_set_base_atomic = intel_pipe_set_base_atomic,
9021 .load_lut = intel_crtc_load_lut,
9025 * intel_modeset_update_staged_output_state
9027 * Updates the staged output configuration state, e.g. after we've read out the
9030 static void intel_modeset_update_staged_output_state(struct drm_device *dev)
9032 struct intel_crtc *crtc;
9033 struct intel_encoder *encoder;
9034 struct intel_connector *connector;
9036 list_for_each_entry(connector, &dev->mode_config.connector_list,
9038 connector->new_encoder =
9039 to_intel_encoder(connector->base.encoder);
9042 list_for_each_entry(encoder, &dev->mode_config.encoder_list,
9045 to_intel_crtc(encoder->base.crtc);
9048 list_for_each_entry(crtc, &dev->mode_config.crtc_list,
9050 crtc->new_enabled = crtc->base.enabled;
9052 if (crtc->new_enabled)
9053 crtc->new_config = &crtc->config;
9055 crtc->new_config = NULL;
9060 * intel_modeset_commit_output_state
9062 * This function copies the stage display pipe configuration to the real one.
9064 static void intel_modeset_commit_output_state(struct drm_device *dev)
9066 struct intel_crtc *crtc;
9067 struct intel_encoder *encoder;
9068 struct intel_connector *connector;
9070 list_for_each_entry(connector, &dev->mode_config.connector_list,
9072 connector->base.encoder = &connector->new_encoder->base;
9075 list_for_each_entry(encoder, &dev->mode_config.encoder_list,
9077 encoder->base.crtc = &encoder->new_crtc->base;
9080 list_for_each_entry(crtc, &dev->mode_config.crtc_list,
9082 crtc->base.enabled = crtc->new_enabled;
9087 connected_sink_compute_bpp(struct intel_connector * connector,
9088 struct intel_crtc_config *pipe_config)
9090 int bpp = pipe_config->pipe_bpp;
9092 DRM_DEBUG_KMS("[CONNECTOR:%d:%s] checking for sink bpp constrains\n",
9093 connector->base.base.id,
9094 drm_get_connector_name(&connector->base));
9096 /* Don't use an invalid EDID bpc value */
9097 if (connector->base.display_info.bpc &&
9098 connector->base.display_info.bpc * 3 < bpp) {
9099 DRM_DEBUG_KMS("clamping display bpp (was %d) to EDID reported max of %d\n",
9100 bpp, connector->base.display_info.bpc*3);
9101 pipe_config->pipe_bpp = connector->base.display_info.bpc*3;
9104 /* Clamp bpp to 8 on screens without EDID 1.4 */
9105 if (connector->base.display_info.bpc == 0 && bpp > 24) {
9106 DRM_DEBUG_KMS("clamping display bpp (was %d) to default limit of 24\n",
9108 pipe_config->pipe_bpp = 24;
9113 compute_baseline_pipe_bpp(struct intel_crtc *crtc,
9114 struct drm_framebuffer *fb,
9115 struct intel_crtc_config *pipe_config)
9117 struct drm_device *dev = crtc->base.dev;
9118 struct intel_connector *connector;
9121 switch (fb->pixel_format) {
9123 bpp = 8*3; /* since we go through a colormap */
9125 case DRM_FORMAT_XRGB1555:
9126 case DRM_FORMAT_ARGB1555:
9127 /* checked in intel_framebuffer_init already */
9128 if (WARN_ON(INTEL_INFO(dev)->gen > 3))
9130 case DRM_FORMAT_RGB565:
9131 bpp = 6*3; /* min is 18bpp */
9133 case DRM_FORMAT_XBGR8888:
9134 case DRM_FORMAT_ABGR8888:
9135 /* checked in intel_framebuffer_init already */
9136 if (WARN_ON(INTEL_INFO(dev)->gen < 4))
9138 case DRM_FORMAT_XRGB8888:
9139 case DRM_FORMAT_ARGB8888:
9142 case DRM_FORMAT_XRGB2101010:
9143 case DRM_FORMAT_ARGB2101010:
9144 case DRM_FORMAT_XBGR2101010:
9145 case DRM_FORMAT_ABGR2101010:
9146 /* checked in intel_framebuffer_init already */
9147 if (WARN_ON(INTEL_INFO(dev)->gen < 4))
9151 /* TODO: gen4+ supports 16 bpc floating point, too. */
9153 DRM_DEBUG_KMS("unsupported depth\n");
9157 pipe_config->pipe_bpp = bpp;
9159 /* Clamp display bpp to EDID value */
9160 list_for_each_entry(connector, &dev->mode_config.connector_list,
9162 if (!connector->new_encoder ||
9163 connector->new_encoder->new_crtc != crtc)
9166 connected_sink_compute_bpp(connector, pipe_config);
9172 static void intel_dump_crtc_timings(const struct drm_display_mode *mode)
9174 DRM_DEBUG_KMS("crtc timings: %d %d %d %d %d %d %d %d %d, "
9175 "type: 0x%x flags: 0x%x\n",
9177 mode->crtc_hdisplay, mode->crtc_hsync_start,
9178 mode->crtc_hsync_end, mode->crtc_htotal,
9179 mode->crtc_vdisplay, mode->crtc_vsync_start,
9180 mode->crtc_vsync_end, mode->crtc_vtotal, mode->type, mode->flags);
9183 static void intel_dump_pipe_config(struct intel_crtc *crtc,
9184 struct intel_crtc_config *pipe_config,
9185 const char *context)
9187 DRM_DEBUG_KMS("[CRTC:%d]%s config for pipe %c\n", crtc->base.base.id,
9188 context, pipe_name(crtc->pipe));
9190 DRM_DEBUG_KMS("cpu_transcoder: %c\n", transcoder_name(pipe_config->cpu_transcoder));
9191 DRM_DEBUG_KMS("pipe bpp: %i, dithering: %i\n",
9192 pipe_config->pipe_bpp, pipe_config->dither);
9193 DRM_DEBUG_KMS("fdi/pch: %i, lanes: %i, gmch_m: %u, gmch_n: %u, link_m: %u, link_n: %u, tu: %u\n",
9194 pipe_config->has_pch_encoder,
9195 pipe_config->fdi_lanes,
9196 pipe_config->fdi_m_n.gmch_m, pipe_config->fdi_m_n.gmch_n,
9197 pipe_config->fdi_m_n.link_m, pipe_config->fdi_m_n.link_n,
9198 pipe_config->fdi_m_n.tu);
9199 DRM_DEBUG_KMS("dp: %i, gmch_m: %u, gmch_n: %u, link_m: %u, link_n: %u, tu: %u\n",
9200 pipe_config->has_dp_encoder,
9201 pipe_config->dp_m_n.gmch_m, pipe_config->dp_m_n.gmch_n,
9202 pipe_config->dp_m_n.link_m, pipe_config->dp_m_n.link_n,
9203 pipe_config->dp_m_n.tu);
9204 DRM_DEBUG_KMS("requested mode:\n");
9205 drm_mode_debug_printmodeline(&pipe_config->requested_mode);
9206 DRM_DEBUG_KMS("adjusted mode:\n");
9207 drm_mode_debug_printmodeline(&pipe_config->adjusted_mode);
9208 intel_dump_crtc_timings(&pipe_config->adjusted_mode);
9209 DRM_DEBUG_KMS("port clock: %d\n", pipe_config->port_clock);
9210 DRM_DEBUG_KMS("pipe src size: %dx%d\n",
9211 pipe_config->pipe_src_w, pipe_config->pipe_src_h);
9212 DRM_DEBUG_KMS("gmch pfit: control: 0x%08x, ratios: 0x%08x, lvds border: 0x%08x\n",
9213 pipe_config->gmch_pfit.control,
9214 pipe_config->gmch_pfit.pgm_ratios,
9215 pipe_config->gmch_pfit.lvds_border_bits);
9216 DRM_DEBUG_KMS("pch pfit: pos: 0x%08x, size: 0x%08x, %s\n",
9217 pipe_config->pch_pfit.pos,
9218 pipe_config->pch_pfit.size,
9219 pipe_config->pch_pfit.enabled ? "enabled" : "disabled");
9220 DRM_DEBUG_KMS("ips: %i\n", pipe_config->ips_enabled);
9221 DRM_DEBUG_KMS("double wide: %i\n", pipe_config->double_wide);
9224 static bool encoders_cloneable(const struct intel_encoder *a,
9225 const struct intel_encoder *b)
9227 /* masks could be asymmetric, so check both ways */
9228 return a == b || (a->cloneable & (1 << b->type) &&
9229 b->cloneable & (1 << a->type));
9232 static bool check_single_encoder_cloning(struct intel_crtc *crtc,
9233 struct intel_encoder *encoder)
9235 struct drm_device *dev = crtc->base.dev;
9236 struct intel_encoder *source_encoder;
9238 list_for_each_entry(source_encoder,
9239 &dev->mode_config.encoder_list, base.head) {
9240 if (source_encoder->new_crtc != crtc)
9243 if (!encoders_cloneable(encoder, source_encoder))
9250 static bool check_encoder_cloning(struct intel_crtc *crtc)
9252 struct drm_device *dev = crtc->base.dev;
9253 struct intel_encoder *encoder;
9255 list_for_each_entry(encoder,
9256 &dev->mode_config.encoder_list, base.head) {
9257 if (encoder->new_crtc != crtc)
9260 if (!check_single_encoder_cloning(crtc, encoder))
9267 static struct intel_crtc_config *
9268 intel_modeset_pipe_config(struct drm_crtc *crtc,
9269 struct drm_framebuffer *fb,
9270 struct drm_display_mode *mode)
9272 struct drm_device *dev = crtc->dev;
9273 struct intel_encoder *encoder;
9274 struct intel_crtc_config *pipe_config;
9275 int plane_bpp, ret = -EINVAL;
9278 if (!check_encoder_cloning(to_intel_crtc(crtc))) {
9279 DRM_DEBUG_KMS("rejecting invalid cloning configuration\n");
9280 return ERR_PTR(-EINVAL);
9283 pipe_config = kzalloc(sizeof(*pipe_config), GFP_KERNEL);
9285 return ERR_PTR(-ENOMEM);
9287 drm_mode_copy(&pipe_config->adjusted_mode, mode);
9288 drm_mode_copy(&pipe_config->requested_mode, mode);
9290 pipe_config->cpu_transcoder =
9291 (enum transcoder) to_intel_crtc(crtc)->pipe;
9292 pipe_config->shared_dpll = DPLL_ID_PRIVATE;
9295 * Sanitize sync polarity flags based on requested ones. If neither
9296 * positive or negative polarity is requested, treat this as meaning
9297 * negative polarity.
9299 if (!(pipe_config->adjusted_mode.flags &
9300 (DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NHSYNC)))
9301 pipe_config->adjusted_mode.flags |= DRM_MODE_FLAG_NHSYNC;
9303 if (!(pipe_config->adjusted_mode.flags &
9304 (DRM_MODE_FLAG_PVSYNC | DRM_MODE_FLAG_NVSYNC)))
9305 pipe_config->adjusted_mode.flags |= DRM_MODE_FLAG_NVSYNC;
9307 /* Compute a starting value for pipe_config->pipe_bpp taking the source
9308 * plane pixel format and any sink constraints into account. Returns the
9309 * source plane bpp so that dithering can be selected on mismatches
9310 * after encoders and crtc also have had their say. */
9311 plane_bpp = compute_baseline_pipe_bpp(to_intel_crtc(crtc),
9317 * Determine the real pipe dimensions. Note that stereo modes can
9318 * increase the actual pipe size due to the frame doubling and
9319 * insertion of additional space for blanks between the frame. This
9320 * is stored in the crtc timings. We use the requested mode to do this
9321 * computation to clearly distinguish it from the adjusted mode, which
9322 * can be changed by the connectors in the below retry loop.
9324 drm_mode_set_crtcinfo(&pipe_config->requested_mode, CRTC_STEREO_DOUBLE);
9325 pipe_config->pipe_src_w = pipe_config->requested_mode.crtc_hdisplay;
9326 pipe_config->pipe_src_h = pipe_config->requested_mode.crtc_vdisplay;
9329 /* Ensure the port clock defaults are reset when retrying. */
9330 pipe_config->port_clock = 0;
9331 pipe_config->pixel_multiplier = 1;
9333 /* Fill in default crtc timings, allow encoders to overwrite them. */
9334 drm_mode_set_crtcinfo(&pipe_config->adjusted_mode, CRTC_STEREO_DOUBLE);
9336 /* Pass our mode to the connectors and the CRTC to give them a chance to
9337 * adjust it according to limitations or connector properties, and also
9338 * a chance to reject the mode entirely.
9340 list_for_each_entry(encoder, &dev->mode_config.encoder_list,
9343 if (&encoder->new_crtc->base != crtc)
9346 if (!(encoder->compute_config(encoder, pipe_config))) {
9347 DRM_DEBUG_KMS("Encoder config failure\n");
9352 /* Set default port clock if not overwritten by the encoder. Needs to be
9353 * done afterwards in case the encoder adjusts the mode. */
9354 if (!pipe_config->port_clock)
9355 pipe_config->port_clock = pipe_config->adjusted_mode.crtc_clock
9356 * pipe_config->pixel_multiplier;
9358 ret = intel_crtc_compute_config(to_intel_crtc(crtc), pipe_config);
9360 DRM_DEBUG_KMS("CRTC fixup failed\n");
9365 if (WARN(!retry, "loop in pipe configuration computation\n")) {
9370 DRM_DEBUG_KMS("CRTC bw constrained, retrying\n");
9375 pipe_config->dither = pipe_config->pipe_bpp != plane_bpp;
9376 DRM_DEBUG_KMS("plane bpp: %i, pipe bpp: %i, dithering: %i\n",
9377 plane_bpp, pipe_config->pipe_bpp, pipe_config->dither);
9382 return ERR_PTR(ret);
9385 /* Computes which crtcs are affected and sets the relevant bits in the mask. For
9386 * simplicity we use the crtc's pipe number (because it's easier to obtain). */
9388 intel_modeset_affected_pipes(struct drm_crtc *crtc, unsigned *modeset_pipes,
9389 unsigned *prepare_pipes, unsigned *disable_pipes)
9391 struct intel_crtc *intel_crtc;
9392 struct drm_device *dev = crtc->dev;
9393 struct intel_encoder *encoder;
9394 struct intel_connector *connector;
9395 struct drm_crtc *tmp_crtc;
9397 *disable_pipes = *modeset_pipes = *prepare_pipes = 0;
9399 /* Check which crtcs have changed outputs connected to them, these need
9400 * to be part of the prepare_pipes mask. We don't (yet) support global
9401 * modeset across multiple crtcs, so modeset_pipes will only have one
9402 * bit set at most. */
9403 list_for_each_entry(connector, &dev->mode_config.connector_list,
9405 if (connector->base.encoder == &connector->new_encoder->base)
9408 if (connector->base.encoder) {
9409 tmp_crtc = connector->base.encoder->crtc;
9411 *prepare_pipes |= 1 << to_intel_crtc(tmp_crtc)->pipe;
9414 if (connector->new_encoder)
9416 1 << connector->new_encoder->new_crtc->pipe;
9419 list_for_each_entry(encoder, &dev->mode_config.encoder_list,
9421 if (encoder->base.crtc == &encoder->new_crtc->base)
9424 if (encoder->base.crtc) {
9425 tmp_crtc = encoder->base.crtc;
9427 *prepare_pipes |= 1 << to_intel_crtc(tmp_crtc)->pipe;
9430 if (encoder->new_crtc)
9431 *prepare_pipes |= 1 << encoder->new_crtc->pipe;
9434 /* Check for pipes that will be enabled/disabled ... */
9435 list_for_each_entry(intel_crtc, &dev->mode_config.crtc_list,
9437 if (intel_crtc->base.enabled == intel_crtc->new_enabled)
9440 if (!intel_crtc->new_enabled)
9441 *disable_pipes |= 1 << intel_crtc->pipe;
9443 *prepare_pipes |= 1 << intel_crtc->pipe;
9447 /* set_mode is also used to update properties on life display pipes. */
9448 intel_crtc = to_intel_crtc(crtc);
9449 if (intel_crtc->new_enabled)
9450 *prepare_pipes |= 1 << intel_crtc->pipe;
9453 * For simplicity do a full modeset on any pipe where the output routing
9454 * changed. We could be more clever, but that would require us to be
9455 * more careful with calling the relevant encoder->mode_set functions.
9458 *modeset_pipes = *prepare_pipes;
9460 /* ... and mask these out. */
9461 *modeset_pipes &= ~(*disable_pipes);
9462 *prepare_pipes &= ~(*disable_pipes);
9465 * HACK: We don't (yet) fully support global modesets. intel_set_config
9466 * obies this rule, but the modeset restore mode of
9467 * intel_modeset_setup_hw_state does not.
9469 *modeset_pipes &= 1 << intel_crtc->pipe;
9470 *prepare_pipes &= 1 << intel_crtc->pipe;
9472 DRM_DEBUG_KMS("set mode pipe masks: modeset: %x, prepare: %x, disable: %x\n",
9473 *modeset_pipes, *prepare_pipes, *disable_pipes);
9476 static bool intel_crtc_in_use(struct drm_crtc *crtc)
9478 struct drm_encoder *encoder;
9479 struct drm_device *dev = crtc->dev;
9481 list_for_each_entry(encoder, &dev->mode_config.encoder_list, head)
9482 if (encoder->crtc == crtc)
9489 intel_modeset_update_state(struct drm_device *dev, unsigned prepare_pipes)
9491 struct intel_encoder *intel_encoder;
9492 struct intel_crtc *intel_crtc;
9493 struct drm_connector *connector;
9495 list_for_each_entry(intel_encoder, &dev->mode_config.encoder_list,
9497 if (!intel_encoder->base.crtc)
9500 intel_crtc = to_intel_crtc(intel_encoder->base.crtc);
9502 if (prepare_pipes & (1 << intel_crtc->pipe))
9503 intel_encoder->connectors_active = false;
9506 intel_modeset_commit_output_state(dev);
9508 /* Double check state. */
9509 list_for_each_entry(intel_crtc, &dev->mode_config.crtc_list,
9511 WARN_ON(intel_crtc->base.enabled != intel_crtc_in_use(&intel_crtc->base));
9512 WARN_ON(intel_crtc->new_config &&
9513 intel_crtc->new_config != &intel_crtc->config);
9514 WARN_ON(intel_crtc->base.enabled != !!intel_crtc->new_config);
9517 list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
9518 if (!connector->encoder || !connector->encoder->crtc)
9521 intel_crtc = to_intel_crtc(connector->encoder->crtc);
9523 if (prepare_pipes & (1 << intel_crtc->pipe)) {
9524 struct drm_property *dpms_property =
9525 dev->mode_config.dpms_property;
9527 connector->dpms = DRM_MODE_DPMS_ON;
9528 drm_object_property_set_value(&connector->base,
9532 intel_encoder = to_intel_encoder(connector->encoder);
9533 intel_encoder->connectors_active = true;
9539 static bool intel_fuzzy_clock_check(int clock1, int clock2)
9543 if (clock1 == clock2)
9546 if (!clock1 || !clock2)
9549 diff = abs(clock1 - clock2);
9551 if (((((diff + clock1 + clock2) * 100)) / (clock1 + clock2)) < 105)
9557 #define for_each_intel_crtc_masked(dev, mask, intel_crtc) \
9558 list_for_each_entry((intel_crtc), \
9559 &(dev)->mode_config.crtc_list, \
9561 if (mask & (1 <<(intel_crtc)->pipe))
9564 intel_pipe_config_compare(struct drm_device *dev,
9565 struct intel_crtc_config *current_config,
9566 struct intel_crtc_config *pipe_config)
9568 #define PIPE_CONF_CHECK_X(name) \
9569 if (current_config->name != pipe_config->name) { \
9570 DRM_ERROR("mismatch in " #name " " \
9571 "(expected 0x%08x, found 0x%08x)\n", \
9572 current_config->name, \
9573 pipe_config->name); \
9577 #define PIPE_CONF_CHECK_I(name) \
9578 if (current_config->name != pipe_config->name) { \
9579 DRM_ERROR("mismatch in " #name " " \
9580 "(expected %i, found %i)\n", \
9581 current_config->name, \
9582 pipe_config->name); \
9586 #define PIPE_CONF_CHECK_FLAGS(name, mask) \
9587 if ((current_config->name ^ pipe_config->name) & (mask)) { \
9588 DRM_ERROR("mismatch in " #name "(" #mask ") " \
9589 "(expected %i, found %i)\n", \
9590 current_config->name & (mask), \
9591 pipe_config->name & (mask)); \
9595 #define PIPE_CONF_CHECK_CLOCK_FUZZY(name) \
9596 if (!intel_fuzzy_clock_check(current_config->name, pipe_config->name)) { \
9597 DRM_ERROR("mismatch in " #name " " \
9598 "(expected %i, found %i)\n", \
9599 current_config->name, \
9600 pipe_config->name); \
9604 #define PIPE_CONF_QUIRK(quirk) \
9605 ((current_config->quirks | pipe_config->quirks) & (quirk))
9607 PIPE_CONF_CHECK_I(cpu_transcoder);
9609 PIPE_CONF_CHECK_I(has_pch_encoder);
9610 PIPE_CONF_CHECK_I(fdi_lanes);
9611 PIPE_CONF_CHECK_I(fdi_m_n.gmch_m);
9612 PIPE_CONF_CHECK_I(fdi_m_n.gmch_n);
9613 PIPE_CONF_CHECK_I(fdi_m_n.link_m);
9614 PIPE_CONF_CHECK_I(fdi_m_n.link_n);
9615 PIPE_CONF_CHECK_I(fdi_m_n.tu);
9617 PIPE_CONF_CHECK_I(has_dp_encoder);
9618 PIPE_CONF_CHECK_I(dp_m_n.gmch_m);
9619 PIPE_CONF_CHECK_I(dp_m_n.gmch_n);
9620 PIPE_CONF_CHECK_I(dp_m_n.link_m);
9621 PIPE_CONF_CHECK_I(dp_m_n.link_n);
9622 PIPE_CONF_CHECK_I(dp_m_n.tu);
9624 PIPE_CONF_CHECK_I(adjusted_mode.crtc_hdisplay);
9625 PIPE_CONF_CHECK_I(adjusted_mode.crtc_htotal);
9626 PIPE_CONF_CHECK_I(adjusted_mode.crtc_hblank_start);
9627 PIPE_CONF_CHECK_I(adjusted_mode.crtc_hblank_end);
9628 PIPE_CONF_CHECK_I(adjusted_mode.crtc_hsync_start);
9629 PIPE_CONF_CHECK_I(adjusted_mode.crtc_hsync_end);
9631 PIPE_CONF_CHECK_I(adjusted_mode.crtc_vdisplay);
9632 PIPE_CONF_CHECK_I(adjusted_mode.crtc_vtotal);
9633 PIPE_CONF_CHECK_I(adjusted_mode.crtc_vblank_start);
9634 PIPE_CONF_CHECK_I(adjusted_mode.crtc_vblank_end);
9635 PIPE_CONF_CHECK_I(adjusted_mode.crtc_vsync_start);
9636 PIPE_CONF_CHECK_I(adjusted_mode.crtc_vsync_end);
9638 PIPE_CONF_CHECK_I(pixel_multiplier);
9640 PIPE_CONF_CHECK_FLAGS(adjusted_mode.flags,
9641 DRM_MODE_FLAG_INTERLACE);
9643 if (!PIPE_CONF_QUIRK(PIPE_CONFIG_QUIRK_MODE_SYNC_FLAGS)) {
9644 PIPE_CONF_CHECK_FLAGS(adjusted_mode.flags,
9645 DRM_MODE_FLAG_PHSYNC);
9646 PIPE_CONF_CHECK_FLAGS(adjusted_mode.flags,
9647 DRM_MODE_FLAG_NHSYNC);
9648 PIPE_CONF_CHECK_FLAGS(adjusted_mode.flags,
9649 DRM_MODE_FLAG_PVSYNC);
9650 PIPE_CONF_CHECK_FLAGS(adjusted_mode.flags,
9651 DRM_MODE_FLAG_NVSYNC);
9654 PIPE_CONF_CHECK_I(pipe_src_w);
9655 PIPE_CONF_CHECK_I(pipe_src_h);
9657 PIPE_CONF_CHECK_I(gmch_pfit.control);
9658 /* pfit ratios are autocomputed by the hw on gen4+ */
9659 if (INTEL_INFO(dev)->gen < 4)
9660 PIPE_CONF_CHECK_I(gmch_pfit.pgm_ratios);
9661 PIPE_CONF_CHECK_I(gmch_pfit.lvds_border_bits);
9662 PIPE_CONF_CHECK_I(pch_pfit.enabled);
9663 if (current_config->pch_pfit.enabled) {
9664 PIPE_CONF_CHECK_I(pch_pfit.pos);
9665 PIPE_CONF_CHECK_I(pch_pfit.size);
9668 /* BDW+ don't expose a synchronous way to read the state */
9669 if (IS_HASWELL(dev))
9670 PIPE_CONF_CHECK_I(ips_enabled);
9672 PIPE_CONF_CHECK_I(double_wide);
9674 PIPE_CONF_CHECK_I(shared_dpll);
9675 PIPE_CONF_CHECK_X(dpll_hw_state.dpll);
9676 PIPE_CONF_CHECK_X(dpll_hw_state.dpll_md);
9677 PIPE_CONF_CHECK_X(dpll_hw_state.fp0);
9678 PIPE_CONF_CHECK_X(dpll_hw_state.fp1);
9680 if (IS_G4X(dev) || INTEL_INFO(dev)->gen >= 5)
9681 PIPE_CONF_CHECK_I(pipe_bpp);
9683 PIPE_CONF_CHECK_CLOCK_FUZZY(adjusted_mode.crtc_clock);
9684 PIPE_CONF_CHECK_CLOCK_FUZZY(port_clock);
9686 #undef PIPE_CONF_CHECK_X
9687 #undef PIPE_CONF_CHECK_I
9688 #undef PIPE_CONF_CHECK_FLAGS
9689 #undef PIPE_CONF_CHECK_CLOCK_FUZZY
9690 #undef PIPE_CONF_QUIRK
9696 check_connector_state(struct drm_device *dev)
9698 struct intel_connector *connector;
9700 list_for_each_entry(connector, &dev->mode_config.connector_list,
9702 /* This also checks the encoder/connector hw state with the
9703 * ->get_hw_state callbacks. */
9704 intel_connector_check_state(connector);
9706 WARN(&connector->new_encoder->base != connector->base.encoder,
9707 "connector's staged encoder doesn't match current encoder\n");
9712 check_encoder_state(struct drm_device *dev)
9714 struct intel_encoder *encoder;
9715 struct intel_connector *connector;
9717 list_for_each_entry(encoder, &dev->mode_config.encoder_list,
9719 bool enabled = false;
9720 bool active = false;
9721 enum pipe pipe, tracked_pipe;
9723 DRM_DEBUG_KMS("[ENCODER:%d:%s]\n",
9724 encoder->base.base.id,
9725 drm_get_encoder_name(&encoder->base));
9727 WARN(&encoder->new_crtc->base != encoder->base.crtc,
9728 "encoder's stage crtc doesn't match current crtc\n");
9729 WARN(encoder->connectors_active && !encoder->base.crtc,
9730 "encoder's active_connectors set, but no crtc\n");
9732 list_for_each_entry(connector, &dev->mode_config.connector_list,
9734 if (connector->base.encoder != &encoder->base)
9737 if (connector->base.dpms != DRM_MODE_DPMS_OFF)
9740 WARN(!!encoder->base.crtc != enabled,
9741 "encoder's enabled state mismatch "
9742 "(expected %i, found %i)\n",
9743 !!encoder->base.crtc, enabled);
9744 WARN(active && !encoder->base.crtc,
9745 "active encoder with no crtc\n");
9747 WARN(encoder->connectors_active != active,
9748 "encoder's computed active state doesn't match tracked active state "
9749 "(expected %i, found %i)\n", active, encoder->connectors_active);
9751 active = encoder->get_hw_state(encoder, &pipe);
9752 WARN(active != encoder->connectors_active,
9753 "encoder's hw state doesn't match sw tracking "
9754 "(expected %i, found %i)\n",
9755 encoder->connectors_active, active);
9757 if (!encoder->base.crtc)
9760 tracked_pipe = to_intel_crtc(encoder->base.crtc)->pipe;
9761 WARN(active && pipe != tracked_pipe,
9762 "active encoder's pipe doesn't match"
9763 "(expected %i, found %i)\n",
9764 tracked_pipe, pipe);
9770 check_crtc_state(struct drm_device *dev)
9772 struct drm_i915_private *dev_priv = dev->dev_private;
9773 struct intel_crtc *crtc;
9774 struct intel_encoder *encoder;
9775 struct intel_crtc_config pipe_config;
9777 list_for_each_entry(crtc, &dev->mode_config.crtc_list,
9779 bool enabled = false;
9780 bool active = false;
9782 memset(&pipe_config, 0, sizeof(pipe_config));
9784 DRM_DEBUG_KMS("[CRTC:%d]\n",
9785 crtc->base.base.id);
9787 WARN(crtc->active && !crtc->base.enabled,
9788 "active crtc, but not enabled in sw tracking\n");
9790 list_for_each_entry(encoder, &dev->mode_config.encoder_list,
9792 if (encoder->base.crtc != &crtc->base)
9795 if (encoder->connectors_active)
9799 WARN(active != crtc->active,
9800 "crtc's computed active state doesn't match tracked active state "
9801 "(expected %i, found %i)\n", active, crtc->active);
9802 WARN(enabled != crtc->base.enabled,
9803 "crtc's computed enabled state doesn't match tracked enabled state "
9804 "(expected %i, found %i)\n", enabled, crtc->base.enabled);
9806 active = dev_priv->display.get_pipe_config(crtc,
9809 /* hw state is inconsistent with the pipe A quirk */
9810 if (crtc->pipe == PIPE_A && dev_priv->quirks & QUIRK_PIPEA_FORCE)
9811 active = crtc->active;
9813 list_for_each_entry(encoder, &dev->mode_config.encoder_list,
9816 if (encoder->base.crtc != &crtc->base)
9818 if (encoder->get_hw_state(encoder, &pipe))
9819 encoder->get_config(encoder, &pipe_config);
9822 WARN(crtc->active != active,
9823 "crtc active state doesn't match with hw state "
9824 "(expected %i, found %i)\n", crtc->active, active);
9827 !intel_pipe_config_compare(dev, &crtc->config, &pipe_config)) {
9828 WARN(1, "pipe state doesn't match!\n");
9829 intel_dump_pipe_config(crtc, &pipe_config,
9831 intel_dump_pipe_config(crtc, &crtc->config,
9838 check_shared_dpll_state(struct drm_device *dev)
9840 struct drm_i915_private *dev_priv = dev->dev_private;
9841 struct intel_crtc *crtc;
9842 struct intel_dpll_hw_state dpll_hw_state;
9845 for (i = 0; i < dev_priv->num_shared_dpll; i++) {
9846 struct intel_shared_dpll *pll = &dev_priv->shared_dplls[i];
9847 int enabled_crtcs = 0, active_crtcs = 0;
9850 memset(&dpll_hw_state, 0, sizeof(dpll_hw_state));
9852 DRM_DEBUG_KMS("%s\n", pll->name);
9854 active = pll->get_hw_state(dev_priv, pll, &dpll_hw_state);
9856 WARN(pll->active > pll->refcount,
9857 "more active pll users than references: %i vs %i\n",
9858 pll->active, pll->refcount);
9859 WARN(pll->active && !pll->on,
9860 "pll in active use but not on in sw tracking\n");
9861 WARN(pll->on && !pll->active,
9862 "pll in on but not on in use in sw tracking\n");
9863 WARN(pll->on != active,
9864 "pll on state mismatch (expected %i, found %i)\n",
9867 list_for_each_entry(crtc, &dev->mode_config.crtc_list,
9869 if (crtc->base.enabled && intel_crtc_to_shared_dpll(crtc) == pll)
9871 if (crtc->active && intel_crtc_to_shared_dpll(crtc) == pll)
9874 WARN(pll->active != active_crtcs,
9875 "pll active crtcs mismatch (expected %i, found %i)\n",
9876 pll->active, active_crtcs);
9877 WARN(pll->refcount != enabled_crtcs,
9878 "pll enabled crtcs mismatch (expected %i, found %i)\n",
9879 pll->refcount, enabled_crtcs);
9881 WARN(pll->on && memcmp(&pll->hw_state, &dpll_hw_state,
9882 sizeof(dpll_hw_state)),
9883 "pll hw state mismatch\n");
9888 intel_modeset_check_state(struct drm_device *dev)
9890 check_connector_state(dev);
9891 check_encoder_state(dev);
9892 check_crtc_state(dev);
9893 check_shared_dpll_state(dev);
9896 void ironlake_check_encoder_dotclock(const struct intel_crtc_config *pipe_config,
9900 * FDI already provided one idea for the dotclock.
9901 * Yell if the encoder disagrees.
9903 WARN(!intel_fuzzy_clock_check(pipe_config->adjusted_mode.crtc_clock, dotclock),
9904 "FDI dotclock and encoder dotclock mismatch, fdi: %i, encoder: %i\n",
9905 pipe_config->adjusted_mode.crtc_clock, dotclock);
9908 static int __intel_set_mode(struct drm_crtc *crtc,
9909 struct drm_display_mode *mode,
9910 int x, int y, struct drm_framebuffer *fb)
9912 struct drm_device *dev = crtc->dev;
9913 struct drm_i915_private *dev_priv = dev->dev_private;
9914 struct drm_display_mode *saved_mode;
9915 struct intel_crtc_config *pipe_config = NULL;
9916 struct intel_crtc *intel_crtc;
9917 unsigned disable_pipes, prepare_pipes, modeset_pipes;
9920 saved_mode = kmalloc(sizeof(*saved_mode), GFP_KERNEL);
9924 intel_modeset_affected_pipes(crtc, &modeset_pipes,
9925 &prepare_pipes, &disable_pipes);
9927 *saved_mode = crtc->mode;
9929 /* Hack: Because we don't (yet) support global modeset on multiple
9930 * crtcs, we don't keep track of the new mode for more than one crtc.
9931 * Hence simply check whether any bit is set in modeset_pipes in all the
9932 * pieces of code that are not yet converted to deal with mutliple crtcs
9933 * changing their mode at the same time. */
9934 if (modeset_pipes) {
9935 pipe_config = intel_modeset_pipe_config(crtc, fb, mode);
9936 if (IS_ERR(pipe_config)) {
9937 ret = PTR_ERR(pipe_config);
9942 intel_dump_pipe_config(to_intel_crtc(crtc), pipe_config,
9944 to_intel_crtc(crtc)->new_config = pipe_config;
9948 * See if the config requires any additional preparation, e.g.
9949 * to adjust global state with pipes off. We need to do this
9950 * here so we can get the modeset_pipe updated config for the new
9951 * mode set on this crtc. For other crtcs we need to use the
9952 * adjusted_mode bits in the crtc directly.
9954 if (IS_VALLEYVIEW(dev)) {
9955 valleyview_modeset_global_pipes(dev, &prepare_pipes);
9957 /* may have added more to prepare_pipes than we should */
9958 prepare_pipes &= ~disable_pipes;
9961 for_each_intel_crtc_masked(dev, disable_pipes, intel_crtc)
9962 intel_crtc_disable(&intel_crtc->base);
9964 for_each_intel_crtc_masked(dev, prepare_pipes, intel_crtc) {
9965 if (intel_crtc->base.enabled)
9966 dev_priv->display.crtc_disable(&intel_crtc->base);
9969 /* crtc->mode is already used by the ->mode_set callbacks, hence we need
9970 * to set it here already despite that we pass it down the callchain.
9972 if (modeset_pipes) {
9974 /* mode_set/enable/disable functions rely on a correct pipe
9976 to_intel_crtc(crtc)->config = *pipe_config;
9977 to_intel_crtc(crtc)->new_config = &to_intel_crtc(crtc)->config;
9980 * Calculate and store various constants which
9981 * are later needed by vblank and swap-completion
9982 * timestamping. They are derived from true hwmode.
9984 drm_calc_timestamping_constants(crtc,
9985 &pipe_config->adjusted_mode);
9988 /* Only after disabling all output pipelines that will be changed can we
9989 * update the the output configuration. */
9990 intel_modeset_update_state(dev, prepare_pipes);
9992 if (dev_priv->display.modeset_global_resources)
9993 dev_priv->display.modeset_global_resources(dev);
9995 /* Set up the DPLL and any encoders state that needs to adjust or depend
9998 for_each_intel_crtc_masked(dev, modeset_pipes, intel_crtc) {
9999 ret = intel_crtc_mode_set(&intel_crtc->base,
10005 /* Now enable the clocks, plane, pipe, and connectors that we set up. */
10006 for_each_intel_crtc_masked(dev, prepare_pipes, intel_crtc)
10007 dev_priv->display.crtc_enable(&intel_crtc->base);
10009 /* FIXME: add subpixel order */
10011 if (ret && crtc->enabled)
10012 crtc->mode = *saved_mode;
10015 kfree(pipe_config);
10020 static int intel_set_mode(struct drm_crtc *crtc,
10021 struct drm_display_mode *mode,
10022 int x, int y, struct drm_framebuffer *fb)
10026 ret = __intel_set_mode(crtc, mode, x, y, fb);
10029 intel_modeset_check_state(crtc->dev);
10034 void intel_crtc_restore_mode(struct drm_crtc *crtc)
10036 intel_set_mode(crtc, &crtc->mode, crtc->x, crtc->y, crtc->primary->fb);
10039 #undef for_each_intel_crtc_masked
10041 static void intel_set_config_free(struct intel_set_config *config)
10046 kfree(config->save_connector_encoders);
10047 kfree(config->save_encoder_crtcs);
10048 kfree(config->save_crtc_enabled);
10052 static int intel_set_config_save_state(struct drm_device *dev,
10053 struct intel_set_config *config)
10055 struct drm_crtc *crtc;
10056 struct drm_encoder *encoder;
10057 struct drm_connector *connector;
10060 config->save_crtc_enabled =
10061 kcalloc(dev->mode_config.num_crtc,
10062 sizeof(bool), GFP_KERNEL);
10063 if (!config->save_crtc_enabled)
10066 config->save_encoder_crtcs =
10067 kcalloc(dev->mode_config.num_encoder,
10068 sizeof(struct drm_crtc *), GFP_KERNEL);
10069 if (!config->save_encoder_crtcs)
10072 config->save_connector_encoders =
10073 kcalloc(dev->mode_config.num_connector,
10074 sizeof(struct drm_encoder *), GFP_KERNEL);
10075 if (!config->save_connector_encoders)
10078 /* Copy data. Note that driver private data is not affected.
10079 * Should anything bad happen only the expected state is
10080 * restored, not the drivers personal bookkeeping.
10083 list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
10084 config->save_crtc_enabled[count++] = crtc->enabled;
10088 list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
10089 config->save_encoder_crtcs[count++] = encoder->crtc;
10093 list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
10094 config->save_connector_encoders[count++] = connector->encoder;
10100 static void intel_set_config_restore_state(struct drm_device *dev,
10101 struct intel_set_config *config)
10103 struct intel_crtc *crtc;
10104 struct intel_encoder *encoder;
10105 struct intel_connector *connector;
10109 list_for_each_entry(crtc, &dev->mode_config.crtc_list, base.head) {
10110 crtc->new_enabled = config->save_crtc_enabled[count++];
10112 if (crtc->new_enabled)
10113 crtc->new_config = &crtc->config;
10115 crtc->new_config = NULL;
10119 list_for_each_entry(encoder, &dev->mode_config.encoder_list, base.head) {
10120 encoder->new_crtc =
10121 to_intel_crtc(config->save_encoder_crtcs[count++]);
10125 list_for_each_entry(connector, &dev->mode_config.connector_list, base.head) {
10126 connector->new_encoder =
10127 to_intel_encoder(config->save_connector_encoders[count++]);
10132 is_crtc_connector_off(struct drm_mode_set *set)
10136 if (set->num_connectors == 0)
10139 if (WARN_ON(set->connectors == NULL))
10142 for (i = 0; i < set->num_connectors; i++)
10143 if (set->connectors[i]->encoder &&
10144 set->connectors[i]->encoder->crtc == set->crtc &&
10145 set->connectors[i]->dpms != DRM_MODE_DPMS_ON)
10152 intel_set_config_compute_mode_changes(struct drm_mode_set *set,
10153 struct intel_set_config *config)
10156 /* We should be able to check here if the fb has the same properties
10157 * and then just flip_or_move it */
10158 if (is_crtc_connector_off(set)) {
10159 config->mode_changed = true;
10160 } else if (set->crtc->primary->fb != set->fb) {
10161 /* If we have no fb then treat it as a full mode set */
10162 if (set->crtc->primary->fb == NULL) {
10163 struct intel_crtc *intel_crtc =
10164 to_intel_crtc(set->crtc);
10166 if (intel_crtc->active && i915.fastboot) {
10167 DRM_DEBUG_KMS("crtc has no fb, will flip\n");
10168 config->fb_changed = true;
10170 DRM_DEBUG_KMS("inactive crtc, full mode set\n");
10171 config->mode_changed = true;
10173 } else if (set->fb == NULL) {
10174 config->mode_changed = true;
10175 } else if (set->fb->pixel_format !=
10176 set->crtc->primary->fb->pixel_format) {
10177 config->mode_changed = true;
10179 config->fb_changed = true;
10183 if (set->fb && (set->x != set->crtc->x || set->y != set->crtc->y))
10184 config->fb_changed = true;
10186 if (set->mode && !drm_mode_equal(set->mode, &set->crtc->mode)) {
10187 DRM_DEBUG_KMS("modes are different, full mode set\n");
10188 drm_mode_debug_printmodeline(&set->crtc->mode);
10189 drm_mode_debug_printmodeline(set->mode);
10190 config->mode_changed = true;
10193 DRM_DEBUG_KMS("computed changes for [CRTC:%d], mode_changed=%d, fb_changed=%d\n",
10194 set->crtc->base.id, config->mode_changed, config->fb_changed);
10198 intel_modeset_stage_output_state(struct drm_device *dev,
10199 struct drm_mode_set *set,
10200 struct intel_set_config *config)
10202 struct intel_connector *connector;
10203 struct intel_encoder *encoder;
10204 struct intel_crtc *crtc;
10207 /* The upper layers ensure that we either disable a crtc or have a list
10208 * of connectors. For paranoia, double-check this. */
10209 WARN_ON(!set->fb && (set->num_connectors != 0));
10210 WARN_ON(set->fb && (set->num_connectors == 0));
10212 list_for_each_entry(connector, &dev->mode_config.connector_list,
10214 /* Otherwise traverse passed in connector list and get encoders
10216 for (ro = 0; ro < set->num_connectors; ro++) {
10217 if (set->connectors[ro] == &connector->base) {
10218 connector->new_encoder = connector->encoder;
10223 /* If we disable the crtc, disable all its connectors. Also, if
10224 * the connector is on the changing crtc but not on the new
10225 * connector list, disable it. */
10226 if ((!set->fb || ro == set->num_connectors) &&
10227 connector->base.encoder &&
10228 connector->base.encoder->crtc == set->crtc) {
10229 connector->new_encoder = NULL;
10231 DRM_DEBUG_KMS("[CONNECTOR:%d:%s] to [NOCRTC]\n",
10232 connector->base.base.id,
10233 drm_get_connector_name(&connector->base));
10237 if (&connector->new_encoder->base != connector->base.encoder) {
10238 DRM_DEBUG_KMS("encoder changed, full mode switch\n");
10239 config->mode_changed = true;
10242 /* connector->new_encoder is now updated for all connectors. */
10244 /* Update crtc of enabled connectors. */
10245 list_for_each_entry(connector, &dev->mode_config.connector_list,
10247 struct drm_crtc *new_crtc;
10249 if (!connector->new_encoder)
10252 new_crtc = connector->new_encoder->base.crtc;
10254 for (ro = 0; ro < set->num_connectors; ro++) {
10255 if (set->connectors[ro] == &connector->base)
10256 new_crtc = set->crtc;
10259 /* Make sure the new CRTC will work with the encoder */
10260 if (!drm_encoder_crtc_ok(&connector->new_encoder->base,
10264 connector->encoder->new_crtc = to_intel_crtc(new_crtc);
10266 DRM_DEBUG_KMS("[CONNECTOR:%d:%s] to [CRTC:%d]\n",
10267 connector->base.base.id,
10268 drm_get_connector_name(&connector->base),
10269 new_crtc->base.id);
10272 /* Check for any encoders that needs to be disabled. */
10273 list_for_each_entry(encoder, &dev->mode_config.encoder_list,
10275 int num_connectors = 0;
10276 list_for_each_entry(connector,
10277 &dev->mode_config.connector_list,
10279 if (connector->new_encoder == encoder) {
10280 WARN_ON(!connector->new_encoder->new_crtc);
10285 if (num_connectors == 0)
10286 encoder->new_crtc = NULL;
10287 else if (num_connectors > 1)
10290 /* Only now check for crtc changes so we don't miss encoders
10291 * that will be disabled. */
10292 if (&encoder->new_crtc->base != encoder->base.crtc) {
10293 DRM_DEBUG_KMS("crtc changed, full mode switch\n");
10294 config->mode_changed = true;
10297 /* Now we've also updated encoder->new_crtc for all encoders. */
10299 list_for_each_entry(crtc, &dev->mode_config.crtc_list,
10301 crtc->new_enabled = false;
10303 list_for_each_entry(encoder,
10304 &dev->mode_config.encoder_list,
10306 if (encoder->new_crtc == crtc) {
10307 crtc->new_enabled = true;
10312 if (crtc->new_enabled != crtc->base.enabled) {
10313 DRM_DEBUG_KMS("crtc %sabled, full mode switch\n",
10314 crtc->new_enabled ? "en" : "dis");
10315 config->mode_changed = true;
10318 if (crtc->new_enabled)
10319 crtc->new_config = &crtc->config;
10321 crtc->new_config = NULL;
10327 static void disable_crtc_nofb(struct intel_crtc *crtc)
10329 struct drm_device *dev = crtc->base.dev;
10330 struct intel_encoder *encoder;
10331 struct intel_connector *connector;
10333 DRM_DEBUG_KMS("Trying to restore without FB -> disabling pipe %c\n",
10334 pipe_name(crtc->pipe));
10336 list_for_each_entry(connector, &dev->mode_config.connector_list, base.head) {
10337 if (connector->new_encoder &&
10338 connector->new_encoder->new_crtc == crtc)
10339 connector->new_encoder = NULL;
10342 list_for_each_entry(encoder, &dev->mode_config.encoder_list, base.head) {
10343 if (encoder->new_crtc == crtc)
10344 encoder->new_crtc = NULL;
10347 crtc->new_enabled = false;
10348 crtc->new_config = NULL;
10351 static int intel_crtc_set_config(struct drm_mode_set *set)
10353 struct drm_device *dev;
10354 struct drm_mode_set save_set;
10355 struct intel_set_config *config;
10359 BUG_ON(!set->crtc);
10360 BUG_ON(!set->crtc->helper_private);
10362 /* Enforce sane interface api - has been abused by the fb helper. */
10363 BUG_ON(!set->mode && set->fb);
10364 BUG_ON(set->fb && set->num_connectors == 0);
10367 DRM_DEBUG_KMS("[CRTC:%d] [FB:%d] #connectors=%d (x y) (%i %i)\n",
10368 set->crtc->base.id, set->fb->base.id,
10369 (int)set->num_connectors, set->x, set->y);
10371 DRM_DEBUG_KMS("[CRTC:%d] [NOFB]\n", set->crtc->base.id);
10374 dev = set->crtc->dev;
10377 config = kzalloc(sizeof(*config), GFP_KERNEL);
10381 ret = intel_set_config_save_state(dev, config);
10385 save_set.crtc = set->crtc;
10386 save_set.mode = &set->crtc->mode;
10387 save_set.x = set->crtc->x;
10388 save_set.y = set->crtc->y;
10389 save_set.fb = set->crtc->primary->fb;
10391 /* Compute whether we need a full modeset, only an fb base update or no
10392 * change at all. In the future we might also check whether only the
10393 * mode changed, e.g. for LVDS where we only change the panel fitter in
10395 intel_set_config_compute_mode_changes(set, config);
10397 ret = intel_modeset_stage_output_state(dev, set, config);
10401 if (config->mode_changed) {
10402 ret = intel_set_mode(set->crtc, set->mode,
10403 set->x, set->y, set->fb);
10404 } else if (config->fb_changed) {
10405 intel_crtc_wait_for_pending_flips(set->crtc);
10407 ret = intel_pipe_set_base(set->crtc,
10408 set->x, set->y, set->fb);
10410 * In the fastboot case this may be our only check of the
10411 * state after boot. It would be better to only do it on
10412 * the first update, but we don't have a nice way of doing that
10413 * (and really, set_config isn't used much for high freq page
10414 * flipping, so increasing its cost here shouldn't be a big
10417 if (i915.fastboot && ret == 0)
10418 intel_modeset_check_state(set->crtc->dev);
10422 DRM_DEBUG_KMS("failed to set mode on [CRTC:%d], err = %d\n",
10423 set->crtc->base.id, ret);
10425 intel_set_config_restore_state(dev, config);
10428 * HACK: if the pipe was on, but we didn't have a framebuffer,
10429 * force the pipe off to avoid oopsing in the modeset code
10430 * due to fb==NULL. This should only happen during boot since
10431 * we don't yet reconstruct the FB from the hardware state.
10433 if (to_intel_crtc(save_set.crtc)->new_enabled && !save_set.fb)
10434 disable_crtc_nofb(to_intel_crtc(save_set.crtc));
10436 /* Try to restore the config */
10437 if (config->mode_changed &&
10438 intel_set_mode(save_set.crtc, save_set.mode,
10439 save_set.x, save_set.y, save_set.fb))
10440 DRM_ERROR("failed to restore config after modeset failure\n");
10444 intel_set_config_free(config);
10448 static const struct drm_crtc_funcs intel_crtc_funcs = {
10449 .cursor_set = intel_crtc_cursor_set,
10450 .cursor_move = intel_crtc_cursor_move,
10451 .gamma_set = intel_crtc_gamma_set,
10452 .set_config = intel_crtc_set_config,
10453 .destroy = intel_crtc_destroy,
10454 .page_flip = intel_crtc_page_flip,
10457 static void intel_cpu_pll_init(struct drm_device *dev)
10460 intel_ddi_pll_init(dev);
10463 static bool ibx_pch_dpll_get_hw_state(struct drm_i915_private *dev_priv,
10464 struct intel_shared_dpll *pll,
10465 struct intel_dpll_hw_state *hw_state)
10469 val = I915_READ(PCH_DPLL(pll->id));
10470 hw_state->dpll = val;
10471 hw_state->fp0 = I915_READ(PCH_FP0(pll->id));
10472 hw_state->fp1 = I915_READ(PCH_FP1(pll->id));
10474 return val & DPLL_VCO_ENABLE;
10477 static void ibx_pch_dpll_mode_set(struct drm_i915_private *dev_priv,
10478 struct intel_shared_dpll *pll)
10480 I915_WRITE(PCH_FP0(pll->id), pll->hw_state.fp0);
10481 I915_WRITE(PCH_FP1(pll->id), pll->hw_state.fp1);
10484 static void ibx_pch_dpll_enable(struct drm_i915_private *dev_priv,
10485 struct intel_shared_dpll *pll)
10487 /* PCH refclock must be enabled first */
10488 ibx_assert_pch_refclk_enabled(dev_priv);
10490 I915_WRITE(PCH_DPLL(pll->id), pll->hw_state.dpll);
10492 /* Wait for the clocks to stabilize. */
10493 POSTING_READ(PCH_DPLL(pll->id));
10496 /* The pixel multiplier can only be updated once the
10497 * DPLL is enabled and the clocks are stable.
10499 * So write it again.
10501 I915_WRITE(PCH_DPLL(pll->id), pll->hw_state.dpll);
10502 POSTING_READ(PCH_DPLL(pll->id));
10506 static void ibx_pch_dpll_disable(struct drm_i915_private *dev_priv,
10507 struct intel_shared_dpll *pll)
10509 struct drm_device *dev = dev_priv->dev;
10510 struct intel_crtc *crtc;
10512 /* Make sure no transcoder isn't still depending on us. */
10513 list_for_each_entry(crtc, &dev->mode_config.crtc_list, base.head) {
10514 if (intel_crtc_to_shared_dpll(crtc) == pll)
10515 assert_pch_transcoder_disabled(dev_priv, crtc->pipe);
10518 I915_WRITE(PCH_DPLL(pll->id), 0);
10519 POSTING_READ(PCH_DPLL(pll->id));
10523 static char *ibx_pch_dpll_names[] = {
10528 static void ibx_pch_dpll_init(struct drm_device *dev)
10530 struct drm_i915_private *dev_priv = dev->dev_private;
10533 dev_priv->num_shared_dpll = 2;
10535 for (i = 0; i < dev_priv->num_shared_dpll; i++) {
10536 dev_priv->shared_dplls[i].id = i;
10537 dev_priv->shared_dplls[i].name = ibx_pch_dpll_names[i];
10538 dev_priv->shared_dplls[i].mode_set = ibx_pch_dpll_mode_set;
10539 dev_priv->shared_dplls[i].enable = ibx_pch_dpll_enable;
10540 dev_priv->shared_dplls[i].disable = ibx_pch_dpll_disable;
10541 dev_priv->shared_dplls[i].get_hw_state =
10542 ibx_pch_dpll_get_hw_state;
10546 static void intel_shared_dpll_init(struct drm_device *dev)
10548 struct drm_i915_private *dev_priv = dev->dev_private;
10550 if (HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev))
10551 ibx_pch_dpll_init(dev);
10553 dev_priv->num_shared_dpll = 0;
10555 BUG_ON(dev_priv->num_shared_dpll > I915_NUM_PLLS);
10558 static void intel_crtc_init(struct drm_device *dev, int pipe)
10560 struct drm_i915_private *dev_priv = dev->dev_private;
10561 struct intel_crtc *intel_crtc;
10564 intel_crtc = kzalloc(sizeof(*intel_crtc), GFP_KERNEL);
10565 if (intel_crtc == NULL)
10568 drm_crtc_init(dev, &intel_crtc->base, &intel_crtc_funcs);
10570 if (IS_GEN2(dev)) {
10571 intel_crtc->max_cursor_width = GEN2_CURSOR_WIDTH;
10572 intel_crtc->max_cursor_height = GEN2_CURSOR_HEIGHT;
10574 intel_crtc->max_cursor_width = CURSOR_WIDTH;
10575 intel_crtc->max_cursor_height = CURSOR_HEIGHT;
10577 dev->mode_config.cursor_width = intel_crtc->max_cursor_width;
10578 dev->mode_config.cursor_height = intel_crtc->max_cursor_height;
10580 drm_mode_crtc_set_gamma_size(&intel_crtc->base, 256);
10581 for (i = 0; i < 256; i++) {
10582 intel_crtc->lut_r[i] = i;
10583 intel_crtc->lut_g[i] = i;
10584 intel_crtc->lut_b[i] = i;
10588 * On gen2/3 only plane A can do fbc, but the panel fitter and lvds port
10589 * is hooked to plane B. Hence we want plane A feeding pipe B.
10591 intel_crtc->pipe = pipe;
10592 intel_crtc->plane = pipe;
10593 if (HAS_FBC(dev) && INTEL_INFO(dev)->gen < 4) {
10594 DRM_DEBUG_KMS("swapping pipes & planes for FBC\n");
10595 intel_crtc->plane = !pipe;
10598 BUG_ON(pipe >= ARRAY_SIZE(dev_priv->plane_to_crtc_mapping) ||
10599 dev_priv->plane_to_crtc_mapping[intel_crtc->plane] != NULL);
10600 dev_priv->plane_to_crtc_mapping[intel_crtc->plane] = &intel_crtc->base;
10601 dev_priv->pipe_to_crtc_mapping[intel_crtc->pipe] = &intel_crtc->base;
10603 drm_crtc_helper_add(&intel_crtc->base, &intel_helper_funcs);
10606 enum pipe intel_get_pipe_from_connector(struct intel_connector *connector)
10608 struct drm_encoder *encoder = connector->base.encoder;
10610 WARN_ON(!mutex_is_locked(&connector->base.dev->mode_config.mutex));
10613 return INVALID_PIPE;
10615 return to_intel_crtc(encoder->crtc)->pipe;
10618 int intel_get_pipe_from_crtc_id(struct drm_device *dev, void *data,
10619 struct drm_file *file)
10621 struct drm_i915_get_pipe_from_crtc_id *pipe_from_crtc_id = data;
10622 struct drm_mode_object *drmmode_obj;
10623 struct intel_crtc *crtc;
10625 if (!drm_core_check_feature(dev, DRIVER_MODESET))
10628 drmmode_obj = drm_mode_object_find(dev, pipe_from_crtc_id->crtc_id,
10629 DRM_MODE_OBJECT_CRTC);
10631 if (!drmmode_obj) {
10632 DRM_ERROR("no such CRTC id\n");
10636 crtc = to_intel_crtc(obj_to_crtc(drmmode_obj));
10637 pipe_from_crtc_id->pipe = crtc->pipe;
10642 static int intel_encoder_clones(struct intel_encoder *encoder)
10644 struct drm_device *dev = encoder->base.dev;
10645 struct intel_encoder *source_encoder;
10646 int index_mask = 0;
10649 list_for_each_entry(source_encoder,
10650 &dev->mode_config.encoder_list, base.head) {
10651 if (encoders_cloneable(encoder, source_encoder))
10652 index_mask |= (1 << entry);
10660 static bool has_edp_a(struct drm_device *dev)
10662 struct drm_i915_private *dev_priv = dev->dev_private;
10664 if (!IS_MOBILE(dev))
10667 if ((I915_READ(DP_A) & DP_DETECTED) == 0)
10670 if (IS_GEN5(dev) && (I915_READ(FUSE_STRAP) & ILK_eDP_A_DISABLE))
10676 const char *intel_output_name(int output)
10678 static const char *names[] = {
10679 [INTEL_OUTPUT_UNUSED] = "Unused",
10680 [INTEL_OUTPUT_ANALOG] = "Analog",
10681 [INTEL_OUTPUT_DVO] = "DVO",
10682 [INTEL_OUTPUT_SDVO] = "SDVO",
10683 [INTEL_OUTPUT_LVDS] = "LVDS",
10684 [INTEL_OUTPUT_TVOUT] = "TV",
10685 [INTEL_OUTPUT_HDMI] = "HDMI",
10686 [INTEL_OUTPUT_DISPLAYPORT] = "DisplayPort",
10687 [INTEL_OUTPUT_EDP] = "eDP",
10688 [INTEL_OUTPUT_DSI] = "DSI",
10689 [INTEL_OUTPUT_UNKNOWN] = "Unknown",
10692 if (output < 0 || output >= ARRAY_SIZE(names) || !names[output])
10695 return names[output];
10698 static void intel_setup_outputs(struct drm_device *dev)
10700 struct drm_i915_private *dev_priv = dev->dev_private;
10701 struct intel_encoder *encoder;
10702 bool dpd_is_edp = false;
10704 intel_lvds_init(dev);
10707 intel_crt_init(dev);
10709 if (HAS_DDI(dev)) {
10712 /* Haswell uses DDI functions to detect digital outputs */
10713 found = I915_READ(DDI_BUF_CTL_A) & DDI_INIT_DISPLAY_DETECTED;
10714 /* DDI A only supports eDP */
10716 intel_ddi_init(dev, PORT_A);
10718 /* DDI B, C and D detection is indicated by the SFUSE_STRAP
10720 found = I915_READ(SFUSE_STRAP);
10722 if (found & SFUSE_STRAP_DDIB_DETECTED)
10723 intel_ddi_init(dev, PORT_B);
10724 if (found & SFUSE_STRAP_DDIC_DETECTED)
10725 intel_ddi_init(dev, PORT_C);
10726 if (found & SFUSE_STRAP_DDID_DETECTED)
10727 intel_ddi_init(dev, PORT_D);
10728 } else if (HAS_PCH_SPLIT(dev)) {
10730 dpd_is_edp = intel_dp_is_edp(dev, PORT_D);
10732 if (has_edp_a(dev))
10733 intel_dp_init(dev, DP_A, PORT_A);
10735 if (I915_READ(PCH_HDMIB) & SDVO_DETECTED) {
10736 /* PCH SDVOB multiplex with HDMIB */
10737 found = intel_sdvo_init(dev, PCH_SDVOB, true);
10739 intel_hdmi_init(dev, PCH_HDMIB, PORT_B);
10740 if (!found && (I915_READ(PCH_DP_B) & DP_DETECTED))
10741 intel_dp_init(dev, PCH_DP_B, PORT_B);
10744 if (I915_READ(PCH_HDMIC) & SDVO_DETECTED)
10745 intel_hdmi_init(dev, PCH_HDMIC, PORT_C);
10747 if (!dpd_is_edp && I915_READ(PCH_HDMID) & SDVO_DETECTED)
10748 intel_hdmi_init(dev, PCH_HDMID, PORT_D);
10750 if (I915_READ(PCH_DP_C) & DP_DETECTED)
10751 intel_dp_init(dev, PCH_DP_C, PORT_C);
10753 if (I915_READ(PCH_DP_D) & DP_DETECTED)
10754 intel_dp_init(dev, PCH_DP_D, PORT_D);
10755 } else if (IS_VALLEYVIEW(dev)) {
10756 if (I915_READ(VLV_DISPLAY_BASE + GEN4_HDMIB) & SDVO_DETECTED) {
10757 intel_hdmi_init(dev, VLV_DISPLAY_BASE + GEN4_HDMIB,
10759 if (I915_READ(VLV_DISPLAY_BASE + DP_B) & DP_DETECTED)
10760 intel_dp_init(dev, VLV_DISPLAY_BASE + DP_B, PORT_B);
10763 if (I915_READ(VLV_DISPLAY_BASE + GEN4_HDMIC) & SDVO_DETECTED) {
10764 intel_hdmi_init(dev, VLV_DISPLAY_BASE + GEN4_HDMIC,
10766 if (I915_READ(VLV_DISPLAY_BASE + DP_C) & DP_DETECTED)
10767 intel_dp_init(dev, VLV_DISPLAY_BASE + DP_C, PORT_C);
10770 intel_dsi_init(dev);
10771 } else if (SUPPORTS_DIGITAL_OUTPUTS(dev)) {
10772 bool found = false;
10774 if (I915_READ(GEN3_SDVOB) & SDVO_DETECTED) {
10775 DRM_DEBUG_KMS("probing SDVOB\n");
10776 found = intel_sdvo_init(dev, GEN3_SDVOB, true);
10777 if (!found && SUPPORTS_INTEGRATED_HDMI(dev)) {
10778 DRM_DEBUG_KMS("probing HDMI on SDVOB\n");
10779 intel_hdmi_init(dev, GEN4_HDMIB, PORT_B);
10782 if (!found && SUPPORTS_INTEGRATED_DP(dev))
10783 intel_dp_init(dev, DP_B, PORT_B);
10786 /* Before G4X SDVOC doesn't have its own detect register */
10788 if (I915_READ(GEN3_SDVOB) & SDVO_DETECTED) {
10789 DRM_DEBUG_KMS("probing SDVOC\n");
10790 found = intel_sdvo_init(dev, GEN3_SDVOC, false);
10793 if (!found && (I915_READ(GEN3_SDVOC) & SDVO_DETECTED)) {
10795 if (SUPPORTS_INTEGRATED_HDMI(dev)) {
10796 DRM_DEBUG_KMS("probing HDMI on SDVOC\n");
10797 intel_hdmi_init(dev, GEN4_HDMIC, PORT_C);
10799 if (SUPPORTS_INTEGRATED_DP(dev))
10800 intel_dp_init(dev, DP_C, PORT_C);
10803 if (SUPPORTS_INTEGRATED_DP(dev) &&
10804 (I915_READ(DP_D) & DP_DETECTED))
10805 intel_dp_init(dev, DP_D, PORT_D);
10806 } else if (IS_GEN2(dev))
10807 intel_dvo_init(dev);
10809 if (SUPPORTS_TV(dev))
10810 intel_tv_init(dev);
10812 list_for_each_entry(encoder, &dev->mode_config.encoder_list, base.head) {
10813 encoder->base.possible_crtcs = encoder->crtc_mask;
10814 encoder->base.possible_clones =
10815 intel_encoder_clones(encoder);
10818 intel_init_pch_refclk(dev);
10820 drm_helper_move_panel_connectors_to_head(dev);
10823 static void intel_user_framebuffer_destroy(struct drm_framebuffer *fb)
10825 struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
10827 drm_framebuffer_cleanup(fb);
10828 WARN_ON(!intel_fb->obj->framebuffer_references--);
10829 drm_gem_object_unreference_unlocked(&intel_fb->obj->base);
10833 static int intel_user_framebuffer_create_handle(struct drm_framebuffer *fb,
10834 struct drm_file *file,
10835 unsigned int *handle)
10837 struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
10838 struct drm_i915_gem_object *obj = intel_fb->obj;
10840 return drm_gem_handle_create(file, &obj->base, handle);
10843 static const struct drm_framebuffer_funcs intel_fb_funcs = {
10844 .destroy = intel_user_framebuffer_destroy,
10845 .create_handle = intel_user_framebuffer_create_handle,
10848 static int intel_framebuffer_init(struct drm_device *dev,
10849 struct intel_framebuffer *intel_fb,
10850 struct drm_mode_fb_cmd2 *mode_cmd,
10851 struct drm_i915_gem_object *obj)
10853 int aligned_height;
10857 WARN_ON(!mutex_is_locked(&dev->struct_mutex));
10859 if (obj->tiling_mode == I915_TILING_Y) {
10860 DRM_DEBUG("hardware does not support tiling Y\n");
10864 if (mode_cmd->pitches[0] & 63) {
10865 DRM_DEBUG("pitch (%d) must be at least 64 byte aligned\n",
10866 mode_cmd->pitches[0]);
10870 if (INTEL_INFO(dev)->gen >= 5 && !IS_VALLEYVIEW(dev)) {
10871 pitch_limit = 32*1024;
10872 } else if (INTEL_INFO(dev)->gen >= 4) {
10873 if (obj->tiling_mode)
10874 pitch_limit = 16*1024;
10876 pitch_limit = 32*1024;
10877 } else if (INTEL_INFO(dev)->gen >= 3) {
10878 if (obj->tiling_mode)
10879 pitch_limit = 8*1024;
10881 pitch_limit = 16*1024;
10883 /* XXX DSPC is limited to 4k tiled */
10884 pitch_limit = 8*1024;
10886 if (mode_cmd->pitches[0] > pitch_limit) {
10887 DRM_DEBUG("%s pitch (%d) must be at less than %d\n",
10888 obj->tiling_mode ? "tiled" : "linear",
10889 mode_cmd->pitches[0], pitch_limit);
10893 if (obj->tiling_mode != I915_TILING_NONE &&
10894 mode_cmd->pitches[0] != obj->stride) {
10895 DRM_DEBUG("pitch (%d) must match tiling stride (%d)\n",
10896 mode_cmd->pitches[0], obj->stride);
10900 /* Reject formats not supported by any plane early. */
10901 switch (mode_cmd->pixel_format) {
10902 case DRM_FORMAT_C8:
10903 case DRM_FORMAT_RGB565:
10904 case DRM_FORMAT_XRGB8888:
10905 case DRM_FORMAT_ARGB8888:
10907 case DRM_FORMAT_XRGB1555:
10908 case DRM_FORMAT_ARGB1555:
10909 if (INTEL_INFO(dev)->gen > 3) {
10910 DRM_DEBUG("unsupported pixel format: %s\n",
10911 drm_get_format_name(mode_cmd->pixel_format));
10915 case DRM_FORMAT_XBGR8888:
10916 case DRM_FORMAT_ABGR8888:
10917 case DRM_FORMAT_XRGB2101010:
10918 case DRM_FORMAT_ARGB2101010:
10919 case DRM_FORMAT_XBGR2101010:
10920 case DRM_FORMAT_ABGR2101010:
10921 if (INTEL_INFO(dev)->gen < 4) {
10922 DRM_DEBUG("unsupported pixel format: %s\n",
10923 drm_get_format_name(mode_cmd->pixel_format));
10927 case DRM_FORMAT_YUYV:
10928 case DRM_FORMAT_UYVY:
10929 case DRM_FORMAT_YVYU:
10930 case DRM_FORMAT_VYUY:
10931 if (INTEL_INFO(dev)->gen < 5) {
10932 DRM_DEBUG("unsupported pixel format: %s\n",
10933 drm_get_format_name(mode_cmd->pixel_format));
10938 DRM_DEBUG("unsupported pixel format: %s\n",
10939 drm_get_format_name(mode_cmd->pixel_format));
10943 /* FIXME need to adjust LINOFF/TILEOFF accordingly. */
10944 if (mode_cmd->offsets[0] != 0)
10947 aligned_height = intel_align_height(dev, mode_cmd->height,
10949 /* FIXME drm helper for size checks (especially planar formats)? */
10950 if (obj->base.size < aligned_height * mode_cmd->pitches[0])
10953 drm_helper_mode_fill_fb_struct(&intel_fb->base, mode_cmd);
10954 intel_fb->obj = obj;
10955 intel_fb->obj->framebuffer_references++;
10957 ret = drm_framebuffer_init(dev, &intel_fb->base, &intel_fb_funcs);
10959 DRM_ERROR("framebuffer init failed %d\n", ret);
10966 static struct drm_framebuffer *
10967 intel_user_framebuffer_create(struct drm_device *dev,
10968 struct drm_file *filp,
10969 struct drm_mode_fb_cmd2 *mode_cmd)
10971 struct drm_i915_gem_object *obj;
10973 obj = to_intel_bo(drm_gem_object_lookup(dev, filp,
10974 mode_cmd->handles[0]));
10975 if (&obj->base == NULL)
10976 return ERR_PTR(-ENOENT);
10978 return intel_framebuffer_create(dev, mode_cmd, obj);
10981 #ifndef CONFIG_DRM_I915_FBDEV
10982 static inline void intel_fbdev_output_poll_changed(struct drm_device *dev)
10987 static const struct drm_mode_config_funcs intel_mode_funcs = {
10988 .fb_create = intel_user_framebuffer_create,
10989 .output_poll_changed = intel_fbdev_output_poll_changed,
10992 /* Set up chip specific display functions */
10993 static void intel_init_display(struct drm_device *dev)
10995 struct drm_i915_private *dev_priv = dev->dev_private;
10997 if (HAS_PCH_SPLIT(dev) || IS_G4X(dev))
10998 dev_priv->display.find_dpll = g4x_find_best_dpll;
10999 else if (IS_VALLEYVIEW(dev))
11000 dev_priv->display.find_dpll = vlv_find_best_dpll;
11001 else if (IS_PINEVIEW(dev))
11002 dev_priv->display.find_dpll = pnv_find_best_dpll;
11004 dev_priv->display.find_dpll = i9xx_find_best_dpll;
11006 if (HAS_DDI(dev)) {
11007 dev_priv->display.get_pipe_config = haswell_get_pipe_config;
11008 dev_priv->display.get_plane_config = ironlake_get_plane_config;
11009 dev_priv->display.crtc_mode_set = haswell_crtc_mode_set;
11010 dev_priv->display.crtc_enable = haswell_crtc_enable;
11011 dev_priv->display.crtc_disable = haswell_crtc_disable;
11012 dev_priv->display.off = haswell_crtc_off;
11013 dev_priv->display.update_primary_plane =
11014 ironlake_update_primary_plane;
11015 } else if (HAS_PCH_SPLIT(dev)) {
11016 dev_priv->display.get_pipe_config = ironlake_get_pipe_config;
11017 dev_priv->display.get_plane_config = ironlake_get_plane_config;
11018 dev_priv->display.crtc_mode_set = ironlake_crtc_mode_set;
11019 dev_priv->display.crtc_enable = ironlake_crtc_enable;
11020 dev_priv->display.crtc_disable = ironlake_crtc_disable;
11021 dev_priv->display.off = ironlake_crtc_off;
11022 dev_priv->display.update_primary_plane =
11023 ironlake_update_primary_plane;
11024 } else if (IS_VALLEYVIEW(dev)) {
11025 dev_priv->display.get_pipe_config = i9xx_get_pipe_config;
11026 dev_priv->display.get_plane_config = i9xx_get_plane_config;
11027 dev_priv->display.crtc_mode_set = i9xx_crtc_mode_set;
11028 dev_priv->display.crtc_enable = valleyview_crtc_enable;
11029 dev_priv->display.crtc_disable = i9xx_crtc_disable;
11030 dev_priv->display.off = i9xx_crtc_off;
11031 dev_priv->display.update_primary_plane =
11032 i9xx_update_primary_plane;
11034 dev_priv->display.get_pipe_config = i9xx_get_pipe_config;
11035 dev_priv->display.get_plane_config = i9xx_get_plane_config;
11036 dev_priv->display.crtc_mode_set = i9xx_crtc_mode_set;
11037 dev_priv->display.crtc_enable = i9xx_crtc_enable;
11038 dev_priv->display.crtc_disable = i9xx_crtc_disable;
11039 dev_priv->display.off = i9xx_crtc_off;
11040 dev_priv->display.update_primary_plane =
11041 i9xx_update_primary_plane;
11044 /* Returns the core display clock speed */
11045 if (IS_VALLEYVIEW(dev))
11046 dev_priv->display.get_display_clock_speed =
11047 valleyview_get_display_clock_speed;
11048 else if (IS_I945G(dev) || (IS_G33(dev) && !IS_PINEVIEW_M(dev)))
11049 dev_priv->display.get_display_clock_speed =
11050 i945_get_display_clock_speed;
11051 else if (IS_I915G(dev))
11052 dev_priv->display.get_display_clock_speed =
11053 i915_get_display_clock_speed;
11054 else if (IS_I945GM(dev) || IS_845G(dev))
11055 dev_priv->display.get_display_clock_speed =
11056 i9xx_misc_get_display_clock_speed;
11057 else if (IS_PINEVIEW(dev))
11058 dev_priv->display.get_display_clock_speed =
11059 pnv_get_display_clock_speed;
11060 else if (IS_I915GM(dev))
11061 dev_priv->display.get_display_clock_speed =
11062 i915gm_get_display_clock_speed;
11063 else if (IS_I865G(dev))
11064 dev_priv->display.get_display_clock_speed =
11065 i865_get_display_clock_speed;
11066 else if (IS_I85X(dev))
11067 dev_priv->display.get_display_clock_speed =
11068 i855_get_display_clock_speed;
11069 else /* 852, 830 */
11070 dev_priv->display.get_display_clock_speed =
11071 i830_get_display_clock_speed;
11073 if (HAS_PCH_SPLIT(dev)) {
11074 if (IS_GEN5(dev)) {
11075 dev_priv->display.fdi_link_train = ironlake_fdi_link_train;
11076 dev_priv->display.write_eld = ironlake_write_eld;
11077 } else if (IS_GEN6(dev)) {
11078 dev_priv->display.fdi_link_train = gen6_fdi_link_train;
11079 dev_priv->display.write_eld = ironlake_write_eld;
11080 } else if (IS_IVYBRIDGE(dev)) {
11081 /* FIXME: detect B0+ stepping and use auto training */
11082 dev_priv->display.fdi_link_train = ivb_manual_fdi_link_train;
11083 dev_priv->display.write_eld = ironlake_write_eld;
11084 dev_priv->display.modeset_global_resources =
11085 ivb_modeset_global_resources;
11086 } else if (IS_HASWELL(dev) || IS_GEN8(dev)) {
11087 dev_priv->display.fdi_link_train = hsw_fdi_link_train;
11088 dev_priv->display.write_eld = haswell_write_eld;
11089 dev_priv->display.modeset_global_resources =
11090 haswell_modeset_global_resources;
11092 } else if (IS_G4X(dev)) {
11093 dev_priv->display.write_eld = g4x_write_eld;
11094 } else if (IS_VALLEYVIEW(dev)) {
11095 dev_priv->display.modeset_global_resources =
11096 valleyview_modeset_global_resources;
11097 dev_priv->display.write_eld = ironlake_write_eld;
11100 /* Default just returns -ENODEV to indicate unsupported */
11101 dev_priv->display.queue_flip = intel_default_queue_flip;
11103 switch (INTEL_INFO(dev)->gen) {
11105 dev_priv->display.queue_flip = intel_gen2_queue_flip;
11109 dev_priv->display.queue_flip = intel_gen3_queue_flip;
11114 dev_priv->display.queue_flip = intel_gen4_queue_flip;
11118 dev_priv->display.queue_flip = intel_gen6_queue_flip;
11121 case 8: /* FIXME(BDW): Check that the gen8 RCS flip works. */
11122 dev_priv->display.queue_flip = intel_gen7_queue_flip;
11126 intel_panel_init_backlight_funcs(dev);
11130 * Some BIOSes insist on assuming the GPU's pipe A is enabled at suspend,
11131 * resume, or other times. This quirk makes sure that's the case for
11132 * affected systems.
11134 static void quirk_pipea_force(struct drm_device *dev)
11136 struct drm_i915_private *dev_priv = dev->dev_private;
11138 dev_priv->quirks |= QUIRK_PIPEA_FORCE;
11139 DRM_INFO("applying pipe a force quirk\n");
11143 * Some machines (Lenovo U160) do not work with SSC on LVDS for some reason
11145 static void quirk_ssc_force_disable(struct drm_device *dev)
11147 struct drm_i915_private *dev_priv = dev->dev_private;
11148 dev_priv->quirks |= QUIRK_LVDS_SSC_DISABLE;
11149 DRM_INFO("applying lvds SSC disable quirk\n");
11153 * A machine (e.g. Acer Aspire 5734Z) may need to invert the panel backlight
11156 static void quirk_invert_brightness(struct drm_device *dev)
11158 struct drm_i915_private *dev_priv = dev->dev_private;
11159 dev_priv->quirks |= QUIRK_INVERT_BRIGHTNESS;
11160 DRM_INFO("applying inverted panel brightness quirk\n");
11163 struct intel_quirk {
11165 int subsystem_vendor;
11166 int subsystem_device;
11167 void (*hook)(struct drm_device *dev);
11170 /* For systems that don't have a meaningful PCI subdevice/subvendor ID */
11171 struct intel_dmi_quirk {
11172 void (*hook)(struct drm_device *dev);
11173 const struct dmi_system_id (*dmi_id_list)[];
11176 static int intel_dmi_reverse_brightness(const struct dmi_system_id *id)
11178 DRM_INFO("Backlight polarity reversed on %s\n", id->ident);
11182 static const struct intel_dmi_quirk intel_dmi_quirks[] = {
11184 .dmi_id_list = &(const struct dmi_system_id[]) {
11186 .callback = intel_dmi_reverse_brightness,
11187 .ident = "NCR Corporation",
11188 .matches = {DMI_MATCH(DMI_SYS_VENDOR, "NCR Corporation"),
11189 DMI_MATCH(DMI_PRODUCT_NAME, ""),
11192 { } /* terminating entry */
11194 .hook = quirk_invert_brightness,
11198 static struct intel_quirk intel_quirks[] = {
11199 /* HP Mini needs pipe A force quirk (LP: #322104) */
11200 { 0x27ae, 0x103c, 0x361a, quirk_pipea_force },
11202 /* Toshiba Protege R-205, S-209 needs pipe A force quirk */
11203 { 0x2592, 0x1179, 0x0001, quirk_pipea_force },
11205 /* ThinkPad T60 needs pipe A force quirk (bug #16494) */
11206 { 0x2782, 0x17aa, 0x201a, quirk_pipea_force },
11208 /* 830 needs to leave pipe A & dpll A up */
11209 { 0x3577, PCI_ANY_ID, PCI_ANY_ID, quirk_pipea_force },
11211 /* Lenovo U160 cannot use SSC on LVDS */
11212 { 0x0046, 0x17aa, 0x3920, quirk_ssc_force_disable },
11214 /* Sony Vaio Y cannot use SSC on LVDS */
11215 { 0x0046, 0x104d, 0x9076, quirk_ssc_force_disable },
11217 /* Acer Aspire 5734Z must invert backlight brightness */
11218 { 0x2a42, 0x1025, 0x0459, quirk_invert_brightness },
11220 /* Acer/eMachines G725 */
11221 { 0x2a42, 0x1025, 0x0210, quirk_invert_brightness },
11223 /* Acer/eMachines e725 */
11224 { 0x2a42, 0x1025, 0x0212, quirk_invert_brightness },
11226 /* Acer/Packard Bell NCL20 */
11227 { 0x2a42, 0x1025, 0x034b, quirk_invert_brightness },
11229 /* Acer Aspire 4736Z */
11230 { 0x2a42, 0x1025, 0x0260, quirk_invert_brightness },
11232 /* Acer Aspire 5336 */
11233 { 0x2a42, 0x1025, 0x048a, quirk_invert_brightness },
11236 static void intel_init_quirks(struct drm_device *dev)
11238 struct pci_dev *d = dev->pdev;
11241 for (i = 0; i < ARRAY_SIZE(intel_quirks); i++) {
11242 struct intel_quirk *q = &intel_quirks[i];
11244 if (d->device == q->device &&
11245 (d->subsystem_vendor == q->subsystem_vendor ||
11246 q->subsystem_vendor == PCI_ANY_ID) &&
11247 (d->subsystem_device == q->subsystem_device ||
11248 q->subsystem_device == PCI_ANY_ID))
11251 for (i = 0; i < ARRAY_SIZE(intel_dmi_quirks); i++) {
11252 if (dmi_check_system(*intel_dmi_quirks[i].dmi_id_list) != 0)
11253 intel_dmi_quirks[i].hook(dev);
11257 /* Disable the VGA plane that we never use */
11258 static void i915_disable_vga(struct drm_device *dev)
11260 struct drm_i915_private *dev_priv = dev->dev_private;
11262 u32 vga_reg = i915_vgacntrl_reg(dev);
11264 /* WaEnableVGAAccessThroughIOPort:ctg,elk,ilk,snb,ivb,vlv,hsw */
11265 vga_get_uninterruptible(dev->pdev, VGA_RSRC_LEGACY_IO);
11266 outb(SR01, VGA_SR_INDEX);
11267 sr1 = inb(VGA_SR_DATA);
11268 outb(sr1 | 1<<5, VGA_SR_DATA);
11269 vga_put(dev->pdev, VGA_RSRC_LEGACY_IO);
11272 I915_WRITE(vga_reg, VGA_DISP_DISABLE);
11273 POSTING_READ(vga_reg);
11276 void intel_modeset_init_hw(struct drm_device *dev)
11278 intel_prepare_ddi(dev);
11280 intel_init_clock_gating(dev);
11282 intel_reset_dpio(dev);
11284 mutex_lock(&dev->struct_mutex);
11285 intel_enable_gt_powersave(dev);
11286 mutex_unlock(&dev->struct_mutex);
11289 void intel_modeset_suspend_hw(struct drm_device *dev)
11291 intel_suspend_hw(dev);
11294 void intel_modeset_init(struct drm_device *dev)
11296 struct drm_i915_private *dev_priv = dev->dev_private;
11299 struct intel_crtc *crtc;
11301 drm_mode_config_init(dev);
11303 dev->mode_config.min_width = 0;
11304 dev->mode_config.min_height = 0;
11306 dev->mode_config.preferred_depth = 24;
11307 dev->mode_config.prefer_shadow = 1;
11309 dev->mode_config.funcs = &intel_mode_funcs;
11311 intel_init_quirks(dev);
11313 intel_init_pm(dev);
11315 if (INTEL_INFO(dev)->num_pipes == 0)
11318 intel_init_display(dev);
11320 if (IS_GEN2(dev)) {
11321 dev->mode_config.max_width = 2048;
11322 dev->mode_config.max_height = 2048;
11323 } else if (IS_GEN3(dev)) {
11324 dev->mode_config.max_width = 4096;
11325 dev->mode_config.max_height = 4096;
11327 dev->mode_config.max_width = 8192;
11328 dev->mode_config.max_height = 8192;
11330 dev->mode_config.fb_base = dev_priv->gtt.mappable_base;
11332 DRM_DEBUG_KMS("%d display pipe%s available.\n",
11333 INTEL_INFO(dev)->num_pipes,
11334 INTEL_INFO(dev)->num_pipes > 1 ? "s" : "");
11336 for_each_pipe(pipe) {
11337 intel_crtc_init(dev, pipe);
11338 for_each_sprite(pipe, sprite) {
11339 ret = intel_plane_init(dev, pipe, sprite);
11341 DRM_DEBUG_KMS("pipe %c sprite %c init failed: %d\n",
11342 pipe_name(pipe), sprite_name(pipe, sprite), ret);
11346 intel_init_dpio(dev);
11347 intel_reset_dpio(dev);
11349 intel_cpu_pll_init(dev);
11350 intel_shared_dpll_init(dev);
11352 /* Just disable it once at startup */
11353 i915_disable_vga(dev);
11354 intel_setup_outputs(dev);
11356 /* Just in case the BIOS is doing something questionable. */
11357 intel_disable_fbc(dev);
11359 mutex_lock(&dev->mode_config.mutex);
11360 intel_modeset_setup_hw_state(dev, false);
11361 mutex_unlock(&dev->mode_config.mutex);
11363 list_for_each_entry(crtc, &dev->mode_config.crtc_list,
11369 * Note that reserving the BIOS fb up front prevents us
11370 * from stuffing other stolen allocations like the ring
11371 * on top. This prevents some ugliness at boot time, and
11372 * can even allow for smooth boot transitions if the BIOS
11373 * fb is large enough for the active pipe configuration.
11375 if (dev_priv->display.get_plane_config) {
11376 dev_priv->display.get_plane_config(crtc,
11377 &crtc->plane_config);
11379 * If the fb is shared between multiple heads, we'll
11380 * just get the first one.
11382 intel_find_plane_obj(crtc, &crtc->plane_config);
11388 intel_connector_break_all_links(struct intel_connector *connector)
11390 connector->base.dpms = DRM_MODE_DPMS_OFF;
11391 connector->base.encoder = NULL;
11392 connector->encoder->connectors_active = false;
11393 connector->encoder->base.crtc = NULL;
11396 static void intel_enable_pipe_a(struct drm_device *dev)
11398 struct intel_connector *connector;
11399 struct drm_connector *crt = NULL;
11400 struct intel_load_detect_pipe load_detect_temp;
11402 /* We can't just switch on the pipe A, we need to set things up with a
11403 * proper mode and output configuration. As a gross hack, enable pipe A
11404 * by enabling the load detect pipe once. */
11405 list_for_each_entry(connector,
11406 &dev->mode_config.connector_list,
11408 if (connector->encoder->type == INTEL_OUTPUT_ANALOG) {
11409 crt = &connector->base;
11417 if (intel_get_load_detect_pipe(crt, NULL, &load_detect_temp))
11418 intel_release_load_detect_pipe(crt, &load_detect_temp);
11424 intel_check_plane_mapping(struct intel_crtc *crtc)
11426 struct drm_device *dev = crtc->base.dev;
11427 struct drm_i915_private *dev_priv = dev->dev_private;
11430 if (INTEL_INFO(dev)->num_pipes == 1)
11433 reg = DSPCNTR(!crtc->plane);
11434 val = I915_READ(reg);
11436 if ((val & DISPLAY_PLANE_ENABLE) &&
11437 (!!(val & DISPPLANE_SEL_PIPE_MASK) == crtc->pipe))
11443 static void intel_sanitize_crtc(struct intel_crtc *crtc)
11445 struct drm_device *dev = crtc->base.dev;
11446 struct drm_i915_private *dev_priv = dev->dev_private;
11449 /* Clear any frame start delays used for debugging left by the BIOS */
11450 reg = PIPECONF(crtc->config.cpu_transcoder);
11451 I915_WRITE(reg, I915_READ(reg) & ~PIPECONF_FRAME_START_DELAY_MASK);
11453 /* We need to sanitize the plane -> pipe mapping first because this will
11454 * disable the crtc (and hence change the state) if it is wrong. Note
11455 * that gen4+ has a fixed plane -> pipe mapping. */
11456 if (INTEL_INFO(dev)->gen < 4 && !intel_check_plane_mapping(crtc)) {
11457 struct intel_connector *connector;
11460 DRM_DEBUG_KMS("[CRTC:%d] wrong plane connection detected!\n",
11461 crtc->base.base.id);
11463 /* Pipe has the wrong plane attached and the plane is active.
11464 * Temporarily change the plane mapping and disable everything
11466 plane = crtc->plane;
11467 crtc->plane = !plane;
11468 dev_priv->display.crtc_disable(&crtc->base);
11469 crtc->plane = plane;
11471 /* ... and break all links. */
11472 list_for_each_entry(connector, &dev->mode_config.connector_list,
11474 if (connector->encoder->base.crtc != &crtc->base)
11477 intel_connector_break_all_links(connector);
11480 WARN_ON(crtc->active);
11481 crtc->base.enabled = false;
11484 if (dev_priv->quirks & QUIRK_PIPEA_FORCE &&
11485 crtc->pipe == PIPE_A && !crtc->active) {
11486 /* BIOS forgot to enable pipe A, this mostly happens after
11487 * resume. Force-enable the pipe to fix this, the update_dpms
11488 * call below we restore the pipe to the right state, but leave
11489 * the required bits on. */
11490 intel_enable_pipe_a(dev);
11493 /* Adjust the state of the output pipe according to whether we
11494 * have active connectors/encoders. */
11495 intel_crtc_update_dpms(&crtc->base);
11497 if (crtc->active != crtc->base.enabled) {
11498 struct intel_encoder *encoder;
11500 /* This can happen either due to bugs in the get_hw_state
11501 * functions or because the pipe is force-enabled due to the
11503 DRM_DEBUG_KMS("[CRTC:%d] hw state adjusted, was %s, now %s\n",
11504 crtc->base.base.id,
11505 crtc->base.enabled ? "enabled" : "disabled",
11506 crtc->active ? "enabled" : "disabled");
11508 crtc->base.enabled = crtc->active;
11510 /* Because we only establish the connector -> encoder ->
11511 * crtc links if something is active, this means the
11512 * crtc is now deactivated. Break the links. connector
11513 * -> encoder links are only establish when things are
11514 * actually up, hence no need to break them. */
11515 WARN_ON(crtc->active);
11517 for_each_encoder_on_crtc(dev, &crtc->base, encoder) {
11518 WARN_ON(encoder->connectors_active);
11519 encoder->base.crtc = NULL;
11522 if (crtc->active) {
11524 * We start out with underrun reporting disabled to avoid races.
11525 * For correct bookkeeping mark this on active crtcs.
11527 * No protection against concurrent access is required - at
11528 * worst a fifo underrun happens which also sets this to false.
11530 crtc->cpu_fifo_underrun_disabled = true;
11531 crtc->pch_fifo_underrun_disabled = true;
11535 static void intel_sanitize_encoder(struct intel_encoder *encoder)
11537 struct intel_connector *connector;
11538 struct drm_device *dev = encoder->base.dev;
11540 /* We need to check both for a crtc link (meaning that the
11541 * encoder is active and trying to read from a pipe) and the
11542 * pipe itself being active. */
11543 bool has_active_crtc = encoder->base.crtc &&
11544 to_intel_crtc(encoder->base.crtc)->active;
11546 if (encoder->connectors_active && !has_active_crtc) {
11547 DRM_DEBUG_KMS("[ENCODER:%d:%s] has active connectors but no active pipe!\n",
11548 encoder->base.base.id,
11549 drm_get_encoder_name(&encoder->base));
11551 /* Connector is active, but has no active pipe. This is
11552 * fallout from our resume register restoring. Disable
11553 * the encoder manually again. */
11554 if (encoder->base.crtc) {
11555 DRM_DEBUG_KMS("[ENCODER:%d:%s] manually disabled\n",
11556 encoder->base.base.id,
11557 drm_get_encoder_name(&encoder->base));
11558 encoder->disable(encoder);
11561 /* Inconsistent output/port/pipe state happens presumably due to
11562 * a bug in one of the get_hw_state functions. Or someplace else
11563 * in our code, like the register restore mess on resume. Clamp
11564 * things to off as a safer default. */
11565 list_for_each_entry(connector,
11566 &dev->mode_config.connector_list,
11568 if (connector->encoder != encoder)
11571 intel_connector_break_all_links(connector);
11574 /* Enabled encoders without active connectors will be fixed in
11575 * the crtc fixup. */
11578 void i915_redisable_vga_power_on(struct drm_device *dev)
11580 struct drm_i915_private *dev_priv = dev->dev_private;
11581 u32 vga_reg = i915_vgacntrl_reg(dev);
11583 if (!(I915_READ(vga_reg) & VGA_DISP_DISABLE)) {
11584 DRM_DEBUG_KMS("Something enabled VGA plane, disabling it\n");
11585 i915_disable_vga(dev);
11589 void i915_redisable_vga(struct drm_device *dev)
11591 struct drm_i915_private *dev_priv = dev->dev_private;
11593 /* This function can be called both from intel_modeset_setup_hw_state or
11594 * at a very early point in our resume sequence, where the power well
11595 * structures are not yet restored. Since this function is at a very
11596 * paranoid "someone might have enabled VGA while we were not looking"
11597 * level, just check if the power well is enabled instead of trying to
11598 * follow the "don't touch the power well if we don't need it" policy
11599 * the rest of the driver uses. */
11600 if (!intel_display_power_enabled(dev_priv, POWER_DOMAIN_VGA))
11603 i915_redisable_vga_power_on(dev);
11606 static void intel_modeset_readout_hw_state(struct drm_device *dev)
11608 struct drm_i915_private *dev_priv = dev->dev_private;
11610 struct intel_crtc *crtc;
11611 struct intel_encoder *encoder;
11612 struct intel_connector *connector;
11615 list_for_each_entry(crtc, &dev->mode_config.crtc_list,
11617 memset(&crtc->config, 0, sizeof(crtc->config));
11619 crtc->active = dev_priv->display.get_pipe_config(crtc,
11622 crtc->base.enabled = crtc->active;
11623 crtc->primary_enabled = crtc->active;
11625 DRM_DEBUG_KMS("[CRTC:%d] hw state readout: %s\n",
11626 crtc->base.base.id,
11627 crtc->active ? "enabled" : "disabled");
11630 /* FIXME: Smash this into the new shared dpll infrastructure. */
11632 intel_ddi_setup_hw_pll_state(dev);
11634 for (i = 0; i < dev_priv->num_shared_dpll; i++) {
11635 struct intel_shared_dpll *pll = &dev_priv->shared_dplls[i];
11637 pll->on = pll->get_hw_state(dev_priv, pll, &pll->hw_state);
11639 list_for_each_entry(crtc, &dev->mode_config.crtc_list,
11641 if (crtc->active && intel_crtc_to_shared_dpll(crtc) == pll)
11644 pll->refcount = pll->active;
11646 DRM_DEBUG_KMS("%s hw state readout: refcount %i, on %i\n",
11647 pll->name, pll->refcount, pll->on);
11650 list_for_each_entry(encoder, &dev->mode_config.encoder_list,
11654 if (encoder->get_hw_state(encoder, &pipe)) {
11655 crtc = to_intel_crtc(dev_priv->pipe_to_crtc_mapping[pipe]);
11656 encoder->base.crtc = &crtc->base;
11657 encoder->get_config(encoder, &crtc->config);
11659 encoder->base.crtc = NULL;
11662 encoder->connectors_active = false;
11663 DRM_DEBUG_KMS("[ENCODER:%d:%s] hw state readout: %s, pipe %c\n",
11664 encoder->base.base.id,
11665 drm_get_encoder_name(&encoder->base),
11666 encoder->base.crtc ? "enabled" : "disabled",
11670 list_for_each_entry(connector, &dev->mode_config.connector_list,
11672 if (connector->get_hw_state(connector)) {
11673 connector->base.dpms = DRM_MODE_DPMS_ON;
11674 connector->encoder->connectors_active = true;
11675 connector->base.encoder = &connector->encoder->base;
11677 connector->base.dpms = DRM_MODE_DPMS_OFF;
11678 connector->base.encoder = NULL;
11680 DRM_DEBUG_KMS("[CONNECTOR:%d:%s] hw state readout: %s\n",
11681 connector->base.base.id,
11682 drm_get_connector_name(&connector->base),
11683 connector->base.encoder ? "enabled" : "disabled");
11687 /* Scan out the current hw modeset state, sanitizes it and maps it into the drm
11688 * and i915 state tracking structures. */
11689 void intel_modeset_setup_hw_state(struct drm_device *dev,
11690 bool force_restore)
11692 struct drm_i915_private *dev_priv = dev->dev_private;
11694 struct intel_crtc *crtc;
11695 struct intel_encoder *encoder;
11698 intel_modeset_readout_hw_state(dev);
11701 * Now that we have the config, copy it to each CRTC struct
11702 * Note that this could go away if we move to using crtc_config
11703 * checking everywhere.
11705 list_for_each_entry(crtc, &dev->mode_config.crtc_list,
11707 if (crtc->active && i915.fastboot) {
11708 intel_mode_from_pipe_config(&crtc->base.mode, &crtc->config);
11709 DRM_DEBUG_KMS("[CRTC:%d] found active mode: ",
11710 crtc->base.base.id);
11711 drm_mode_debug_printmodeline(&crtc->base.mode);
11715 /* HW state is read out, now we need to sanitize this mess. */
11716 list_for_each_entry(encoder, &dev->mode_config.encoder_list,
11718 intel_sanitize_encoder(encoder);
11721 for_each_pipe(pipe) {
11722 crtc = to_intel_crtc(dev_priv->pipe_to_crtc_mapping[pipe]);
11723 intel_sanitize_crtc(crtc);
11724 intel_dump_pipe_config(crtc, &crtc->config, "[setup_hw_state]");
11727 for (i = 0; i < dev_priv->num_shared_dpll; i++) {
11728 struct intel_shared_dpll *pll = &dev_priv->shared_dplls[i];
11730 if (!pll->on || pll->active)
11733 DRM_DEBUG_KMS("%s enabled but not in use, disabling\n", pll->name);
11735 pll->disable(dev_priv, pll);
11739 if (HAS_PCH_SPLIT(dev))
11740 ilk_wm_get_hw_state(dev);
11742 if (force_restore) {
11743 i915_redisable_vga(dev);
11746 * We need to use raw interfaces for restoring state to avoid
11747 * checking (bogus) intermediate states.
11749 for_each_pipe(pipe) {
11750 struct drm_crtc *crtc =
11751 dev_priv->pipe_to_crtc_mapping[pipe];
11753 __intel_set_mode(crtc, &crtc->mode, crtc->x, crtc->y,
11754 crtc->primary->fb);
11757 intel_modeset_update_staged_output_state(dev);
11760 intel_modeset_check_state(dev);
11763 void intel_modeset_gem_init(struct drm_device *dev)
11765 struct drm_crtc *c;
11766 struct intel_framebuffer *fb;
11768 mutex_lock(&dev->struct_mutex);
11769 intel_init_gt_powersave(dev);
11770 mutex_unlock(&dev->struct_mutex);
11772 intel_modeset_init_hw(dev);
11774 intel_setup_overlay(dev);
11777 * Make sure any fbs we allocated at startup are properly
11778 * pinned & fenced. When we do the allocation it's too early
11781 mutex_lock(&dev->struct_mutex);
11782 list_for_each_entry(c, &dev->mode_config.crtc_list, head) {
11783 if (!c->primary->fb)
11786 fb = to_intel_framebuffer(c->primary->fb);
11787 if (intel_pin_and_fence_fb_obj(dev, fb->obj, NULL)) {
11788 DRM_ERROR("failed to pin boot fb on pipe %d\n",
11789 to_intel_crtc(c)->pipe);
11790 drm_framebuffer_unreference(c->primary->fb);
11791 c->primary->fb = NULL;
11794 mutex_unlock(&dev->struct_mutex);
11797 void intel_connector_unregister(struct intel_connector *intel_connector)
11799 struct drm_connector *connector = &intel_connector->base;
11801 intel_panel_destroy_backlight(connector);
11802 drm_sysfs_connector_remove(connector);
11805 void intel_modeset_cleanup(struct drm_device *dev)
11807 struct drm_i915_private *dev_priv = dev->dev_private;
11808 struct drm_crtc *crtc;
11809 struct drm_connector *connector;
11812 * Interrupts and polling as the first thing to avoid creating havoc.
11813 * Too much stuff here (turning of rps, connectors, ...) would
11814 * experience fancy races otherwise.
11816 drm_irq_uninstall(dev);
11817 cancel_work_sync(&dev_priv->hotplug_work);
11819 * Due to the hpd irq storm handling the hotplug work can re-arm the
11820 * poll handlers. Hence disable polling after hpd handling is shut down.
11822 drm_kms_helper_poll_fini(dev);
11824 mutex_lock(&dev->struct_mutex);
11826 intel_unregister_dsm_handler();
11828 list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
11829 /* Skip inactive CRTCs */
11830 if (!crtc->primary->fb)
11833 intel_increase_pllclock(crtc);
11836 intel_disable_fbc(dev);
11838 intel_disable_gt_powersave(dev);
11840 ironlake_teardown_rc6(dev);
11842 mutex_unlock(&dev->struct_mutex);
11844 /* flush any delayed tasks or pending work */
11845 flush_scheduled_work();
11847 /* destroy the backlight and sysfs files before encoders/connectors */
11848 list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
11849 struct intel_connector *intel_connector;
11851 intel_connector = to_intel_connector(connector);
11852 intel_connector->unregister(intel_connector);
11855 drm_mode_config_cleanup(dev);
11857 intel_cleanup_overlay(dev);
11859 mutex_lock(&dev->struct_mutex);
11860 intel_cleanup_gt_powersave(dev);
11861 mutex_unlock(&dev->struct_mutex);
11865 * Return which encoder is currently attached for connector.
11867 struct drm_encoder *intel_best_encoder(struct drm_connector *connector)
11869 return &intel_attached_encoder(connector)->base;
11872 void intel_connector_attach_encoder(struct intel_connector *connector,
11873 struct intel_encoder *encoder)
11875 connector->encoder = encoder;
11876 drm_mode_connector_attach_encoder(&connector->base,
11881 * set vga decode state - true == enable VGA decode
11883 int intel_modeset_vga_set_state(struct drm_device *dev, bool state)
11885 struct drm_i915_private *dev_priv = dev->dev_private;
11886 unsigned reg = INTEL_INFO(dev)->gen >= 6 ? SNB_GMCH_CTRL : INTEL_GMCH_CTRL;
11889 if (pci_read_config_word(dev_priv->bridge_dev, reg, &gmch_ctrl)) {
11890 DRM_ERROR("failed to read control word\n");
11894 if (!!(gmch_ctrl & INTEL_GMCH_VGA_DISABLE) == !state)
11898 gmch_ctrl &= ~INTEL_GMCH_VGA_DISABLE;
11900 gmch_ctrl |= INTEL_GMCH_VGA_DISABLE;
11902 if (pci_write_config_word(dev_priv->bridge_dev, reg, gmch_ctrl)) {
11903 DRM_ERROR("failed to write control word\n");
11910 struct intel_display_error_state {
11912 u32 power_well_driver;
11914 int num_transcoders;
11916 struct intel_cursor_error_state {
11921 } cursor[I915_MAX_PIPES];
11923 struct intel_pipe_error_state {
11924 bool power_domain_on;
11926 } pipe[I915_MAX_PIPES];
11928 struct intel_plane_error_state {
11936 } plane[I915_MAX_PIPES];
11938 struct intel_transcoder_error_state {
11939 bool power_domain_on;
11940 enum transcoder cpu_transcoder;
11953 struct intel_display_error_state *
11954 intel_display_capture_error_state(struct drm_device *dev)
11956 struct drm_i915_private *dev_priv = dev->dev_private;
11957 struct intel_display_error_state *error;
11958 int transcoders[] = {
11966 if (INTEL_INFO(dev)->num_pipes == 0)
11969 error = kzalloc(sizeof(*error), GFP_ATOMIC);
11973 if (IS_HASWELL(dev) || IS_BROADWELL(dev))
11974 error->power_well_driver = I915_READ(HSW_PWR_WELL_DRIVER);
11977 error->pipe[i].power_domain_on =
11978 intel_display_power_enabled_sw(dev_priv,
11979 POWER_DOMAIN_PIPE(i));
11980 if (!error->pipe[i].power_domain_on)
11983 if (INTEL_INFO(dev)->gen <= 6 || IS_VALLEYVIEW(dev)) {
11984 error->cursor[i].control = I915_READ(CURCNTR(i));
11985 error->cursor[i].position = I915_READ(CURPOS(i));
11986 error->cursor[i].base = I915_READ(CURBASE(i));
11988 error->cursor[i].control = I915_READ(CURCNTR_IVB(i));
11989 error->cursor[i].position = I915_READ(CURPOS_IVB(i));
11990 error->cursor[i].base = I915_READ(CURBASE_IVB(i));
11993 error->plane[i].control = I915_READ(DSPCNTR(i));
11994 error->plane[i].stride = I915_READ(DSPSTRIDE(i));
11995 if (INTEL_INFO(dev)->gen <= 3) {
11996 error->plane[i].size = I915_READ(DSPSIZE(i));
11997 error->plane[i].pos = I915_READ(DSPPOS(i));
11999 if (INTEL_INFO(dev)->gen <= 7 && !IS_HASWELL(dev))
12000 error->plane[i].addr = I915_READ(DSPADDR(i));
12001 if (INTEL_INFO(dev)->gen >= 4) {
12002 error->plane[i].surface = I915_READ(DSPSURF(i));
12003 error->plane[i].tile_offset = I915_READ(DSPTILEOFF(i));
12006 error->pipe[i].source = I915_READ(PIPESRC(i));
12009 error->num_transcoders = INTEL_INFO(dev)->num_pipes;
12010 if (HAS_DDI(dev_priv->dev))
12011 error->num_transcoders++; /* Account for eDP. */
12013 for (i = 0; i < error->num_transcoders; i++) {
12014 enum transcoder cpu_transcoder = transcoders[i];
12016 error->transcoder[i].power_domain_on =
12017 intel_display_power_enabled_sw(dev_priv,
12018 POWER_DOMAIN_TRANSCODER(cpu_transcoder));
12019 if (!error->transcoder[i].power_domain_on)
12022 error->transcoder[i].cpu_transcoder = cpu_transcoder;
12024 error->transcoder[i].conf = I915_READ(PIPECONF(cpu_transcoder));
12025 error->transcoder[i].htotal = I915_READ(HTOTAL(cpu_transcoder));
12026 error->transcoder[i].hblank = I915_READ(HBLANK(cpu_transcoder));
12027 error->transcoder[i].hsync = I915_READ(HSYNC(cpu_transcoder));
12028 error->transcoder[i].vtotal = I915_READ(VTOTAL(cpu_transcoder));
12029 error->transcoder[i].vblank = I915_READ(VBLANK(cpu_transcoder));
12030 error->transcoder[i].vsync = I915_READ(VSYNC(cpu_transcoder));
12036 #define err_printf(e, ...) i915_error_printf(e, __VA_ARGS__)
12039 intel_display_print_error_state(struct drm_i915_error_state_buf *m,
12040 struct drm_device *dev,
12041 struct intel_display_error_state *error)
12048 err_printf(m, "Num Pipes: %d\n", INTEL_INFO(dev)->num_pipes);
12049 if (IS_HASWELL(dev) || IS_BROADWELL(dev))
12050 err_printf(m, "PWR_WELL_CTL2: %08x\n",
12051 error->power_well_driver);
12053 err_printf(m, "Pipe [%d]:\n", i);
12054 err_printf(m, " Power: %s\n",
12055 error->pipe[i].power_domain_on ? "on" : "off");
12056 err_printf(m, " SRC: %08x\n", error->pipe[i].source);
12058 err_printf(m, "Plane [%d]:\n", i);
12059 err_printf(m, " CNTR: %08x\n", error->plane[i].control);
12060 err_printf(m, " STRIDE: %08x\n", error->plane[i].stride);
12061 if (INTEL_INFO(dev)->gen <= 3) {
12062 err_printf(m, " SIZE: %08x\n", error->plane[i].size);
12063 err_printf(m, " POS: %08x\n", error->plane[i].pos);
12065 if (INTEL_INFO(dev)->gen <= 7 && !IS_HASWELL(dev))
12066 err_printf(m, " ADDR: %08x\n", error->plane[i].addr);
12067 if (INTEL_INFO(dev)->gen >= 4) {
12068 err_printf(m, " SURF: %08x\n", error->plane[i].surface);
12069 err_printf(m, " TILEOFF: %08x\n", error->plane[i].tile_offset);
12072 err_printf(m, "Cursor [%d]:\n", i);
12073 err_printf(m, " CNTR: %08x\n", error->cursor[i].control);
12074 err_printf(m, " POS: %08x\n", error->cursor[i].position);
12075 err_printf(m, " BASE: %08x\n", error->cursor[i].base);
12078 for (i = 0; i < error->num_transcoders; i++) {
12079 err_printf(m, "CPU transcoder: %c\n",
12080 transcoder_name(error->transcoder[i].cpu_transcoder));
12081 err_printf(m, " Power: %s\n",
12082 error->transcoder[i].power_domain_on ? "on" : "off");
12083 err_printf(m, " CONF: %08x\n", error->transcoder[i].conf);
12084 err_printf(m, " HTOTAL: %08x\n", error->transcoder[i].htotal);
12085 err_printf(m, " HBLANK: %08x\n", error->transcoder[i].hblank);
12086 err_printf(m, " HSYNC: %08x\n", error->transcoder[i].hsync);
12087 err_printf(m, " VTOTAL: %08x\n", error->transcoder[i].vtotal);
12088 err_printf(m, " VBLANK: %08x\n", error->transcoder[i].vblank);
12089 err_printf(m, " VSYNC: %08x\n", error->transcoder[i].vsync);