2 * Copyright © 2006-2007 Intel Corporation
4 * Permission is hereby granted, free of charge, to any person obtaining a
5 * copy of this software and associated documentation files (the "Software"),
6 * to deal in the Software without restriction, including without limitation
7 * the rights to use, copy, modify, merge, publish, distribute, sublicense,
8 * and/or sell copies of the Software, and to permit persons to whom the
9 * Software is furnished to do so, subject to the following conditions:
11 * The above copyright notice and this permission notice (including the next
12 * paragraph) shall be included in all copies or substantial portions of the
15 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
16 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
17 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
18 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
19 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
20 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
21 * DEALINGS IN THE SOFTWARE.
24 * Eric Anholt <eric@anholt.net>
27 #include <linux/dmi.h>
28 #include <linux/module.h>
29 #include <linux/input.h>
30 #include <linux/i2c.h>
31 #include <linux/kernel.h>
32 #include <linux/slab.h>
33 #include <linux/vgaarb.h>
34 #include <drm/drm_edid.h>
36 #include "intel_drv.h"
37 #include <drm/i915_drm.h>
39 #include "i915_trace.h"
40 #include <drm/drm_dp_helper.h>
41 #include <drm/drm_crtc_helper.h>
42 #include <drm/drm_plane_helper.h>
43 #include <drm/drm_rect.h>
44 #include <linux/dma_remapping.h>
46 /* Primary plane formats supported by all gen */
47 #define COMMON_PRIMARY_FORMATS \
50 DRM_FORMAT_XRGB8888, \
53 /* Primary plane formats for gen <= 3 */
54 static const uint32_t intel_primary_formats_gen2[] = {
55 COMMON_PRIMARY_FORMATS,
60 /* Primary plane formats for gen >= 4 */
61 static const uint32_t intel_primary_formats_gen4[] = {
62 COMMON_PRIMARY_FORMATS, \
65 DRM_FORMAT_XRGB2101010,
66 DRM_FORMAT_ARGB2101010,
67 DRM_FORMAT_XBGR2101010,
68 DRM_FORMAT_ABGR2101010,
72 static const uint32_t intel_cursor_formats[] = {
76 static void intel_crtc_update_cursor(struct drm_crtc *crtc, bool on);
78 static void i9xx_crtc_clock_get(struct intel_crtc *crtc,
79 struct intel_crtc_config *pipe_config);
80 static void ironlake_pch_clock_get(struct intel_crtc *crtc,
81 struct intel_crtc_config *pipe_config);
83 static int intel_set_mode(struct drm_crtc *crtc, struct drm_display_mode *mode,
84 int x, int y, struct drm_framebuffer *old_fb);
85 static int intel_framebuffer_init(struct drm_device *dev,
86 struct intel_framebuffer *ifb,
87 struct drm_mode_fb_cmd2 *mode_cmd,
88 struct drm_i915_gem_object *obj);
89 static void i9xx_set_pipeconf(struct intel_crtc *intel_crtc);
90 static void intel_set_pipe_timings(struct intel_crtc *intel_crtc);
91 static void intel_cpu_transcoder_set_m_n(struct intel_crtc *crtc,
92 struct intel_link_m_n *m_n,
93 struct intel_link_m_n *m2_n2);
94 static void ironlake_set_pipeconf(struct drm_crtc *crtc);
95 static void haswell_set_pipeconf(struct drm_crtc *crtc);
96 static void intel_set_pipe_csc(struct drm_crtc *crtc);
97 static void vlv_prepare_pll(struct intel_crtc *crtc,
98 const struct intel_crtc_config *pipe_config);
99 static void chv_prepare_pll(struct intel_crtc *crtc,
100 const struct intel_crtc_config *pipe_config);
102 static struct intel_encoder *intel_find_encoder(struct intel_connector *connector, int pipe)
104 if (!connector->mst_port)
105 return connector->encoder;
107 return &connector->mst_port->mst_encoders[pipe]->base;
116 int p2_slow, p2_fast;
119 typedef struct intel_limit intel_limit_t;
121 intel_range_t dot, vco, n, m, m1, m2, p, p1;
126 intel_pch_rawclk(struct drm_device *dev)
128 struct drm_i915_private *dev_priv = dev->dev_private;
130 WARN_ON(!HAS_PCH_SPLIT(dev));
132 return I915_READ(PCH_RAWCLK_FREQ) & RAWCLK_FREQ_MASK;
135 static inline u32 /* units of 100MHz */
136 intel_fdi_link_freq(struct drm_device *dev)
139 struct drm_i915_private *dev_priv = dev->dev_private;
140 return (I915_READ(FDI_PLL_BIOS_0) & FDI_PLL_FB_CLOCK_MASK) + 2;
145 static const intel_limit_t intel_limits_i8xx_dac = {
146 .dot = { .min = 25000, .max = 350000 },
147 .vco = { .min = 908000, .max = 1512000 },
148 .n = { .min = 2, .max = 16 },
149 .m = { .min = 96, .max = 140 },
150 .m1 = { .min = 18, .max = 26 },
151 .m2 = { .min = 6, .max = 16 },
152 .p = { .min = 4, .max = 128 },
153 .p1 = { .min = 2, .max = 33 },
154 .p2 = { .dot_limit = 165000,
155 .p2_slow = 4, .p2_fast = 2 },
158 static const intel_limit_t intel_limits_i8xx_dvo = {
159 .dot = { .min = 25000, .max = 350000 },
160 .vco = { .min = 908000, .max = 1512000 },
161 .n = { .min = 2, .max = 16 },
162 .m = { .min = 96, .max = 140 },
163 .m1 = { .min = 18, .max = 26 },
164 .m2 = { .min = 6, .max = 16 },
165 .p = { .min = 4, .max = 128 },
166 .p1 = { .min = 2, .max = 33 },
167 .p2 = { .dot_limit = 165000,
168 .p2_slow = 4, .p2_fast = 4 },
171 static const intel_limit_t intel_limits_i8xx_lvds = {
172 .dot = { .min = 25000, .max = 350000 },
173 .vco = { .min = 908000, .max = 1512000 },
174 .n = { .min = 2, .max = 16 },
175 .m = { .min = 96, .max = 140 },
176 .m1 = { .min = 18, .max = 26 },
177 .m2 = { .min = 6, .max = 16 },
178 .p = { .min = 4, .max = 128 },
179 .p1 = { .min = 1, .max = 6 },
180 .p2 = { .dot_limit = 165000,
181 .p2_slow = 14, .p2_fast = 7 },
184 static const intel_limit_t intel_limits_i9xx_sdvo = {
185 .dot = { .min = 20000, .max = 400000 },
186 .vco = { .min = 1400000, .max = 2800000 },
187 .n = { .min = 1, .max = 6 },
188 .m = { .min = 70, .max = 120 },
189 .m1 = { .min = 8, .max = 18 },
190 .m2 = { .min = 3, .max = 7 },
191 .p = { .min = 5, .max = 80 },
192 .p1 = { .min = 1, .max = 8 },
193 .p2 = { .dot_limit = 200000,
194 .p2_slow = 10, .p2_fast = 5 },
197 static const intel_limit_t intel_limits_i9xx_lvds = {
198 .dot = { .min = 20000, .max = 400000 },
199 .vco = { .min = 1400000, .max = 2800000 },
200 .n = { .min = 1, .max = 6 },
201 .m = { .min = 70, .max = 120 },
202 .m1 = { .min = 8, .max = 18 },
203 .m2 = { .min = 3, .max = 7 },
204 .p = { .min = 7, .max = 98 },
205 .p1 = { .min = 1, .max = 8 },
206 .p2 = { .dot_limit = 112000,
207 .p2_slow = 14, .p2_fast = 7 },
211 static const intel_limit_t intel_limits_g4x_sdvo = {
212 .dot = { .min = 25000, .max = 270000 },
213 .vco = { .min = 1750000, .max = 3500000},
214 .n = { .min = 1, .max = 4 },
215 .m = { .min = 104, .max = 138 },
216 .m1 = { .min = 17, .max = 23 },
217 .m2 = { .min = 5, .max = 11 },
218 .p = { .min = 10, .max = 30 },
219 .p1 = { .min = 1, .max = 3},
220 .p2 = { .dot_limit = 270000,
226 static const intel_limit_t intel_limits_g4x_hdmi = {
227 .dot = { .min = 22000, .max = 400000 },
228 .vco = { .min = 1750000, .max = 3500000},
229 .n = { .min = 1, .max = 4 },
230 .m = { .min = 104, .max = 138 },
231 .m1 = { .min = 16, .max = 23 },
232 .m2 = { .min = 5, .max = 11 },
233 .p = { .min = 5, .max = 80 },
234 .p1 = { .min = 1, .max = 8},
235 .p2 = { .dot_limit = 165000,
236 .p2_slow = 10, .p2_fast = 5 },
239 static const intel_limit_t intel_limits_g4x_single_channel_lvds = {
240 .dot = { .min = 20000, .max = 115000 },
241 .vco = { .min = 1750000, .max = 3500000 },
242 .n = { .min = 1, .max = 3 },
243 .m = { .min = 104, .max = 138 },
244 .m1 = { .min = 17, .max = 23 },
245 .m2 = { .min = 5, .max = 11 },
246 .p = { .min = 28, .max = 112 },
247 .p1 = { .min = 2, .max = 8 },
248 .p2 = { .dot_limit = 0,
249 .p2_slow = 14, .p2_fast = 14
253 static const intel_limit_t intel_limits_g4x_dual_channel_lvds = {
254 .dot = { .min = 80000, .max = 224000 },
255 .vco = { .min = 1750000, .max = 3500000 },
256 .n = { .min = 1, .max = 3 },
257 .m = { .min = 104, .max = 138 },
258 .m1 = { .min = 17, .max = 23 },
259 .m2 = { .min = 5, .max = 11 },
260 .p = { .min = 14, .max = 42 },
261 .p1 = { .min = 2, .max = 6 },
262 .p2 = { .dot_limit = 0,
263 .p2_slow = 7, .p2_fast = 7
267 static const intel_limit_t intel_limits_pineview_sdvo = {
268 .dot = { .min = 20000, .max = 400000},
269 .vco = { .min = 1700000, .max = 3500000 },
270 /* Pineview's Ncounter is a ring counter */
271 .n = { .min = 3, .max = 6 },
272 .m = { .min = 2, .max = 256 },
273 /* Pineview only has one combined m divider, which we treat as m2. */
274 .m1 = { .min = 0, .max = 0 },
275 .m2 = { .min = 0, .max = 254 },
276 .p = { .min = 5, .max = 80 },
277 .p1 = { .min = 1, .max = 8 },
278 .p2 = { .dot_limit = 200000,
279 .p2_slow = 10, .p2_fast = 5 },
282 static const intel_limit_t intel_limits_pineview_lvds = {
283 .dot = { .min = 20000, .max = 400000 },
284 .vco = { .min = 1700000, .max = 3500000 },
285 .n = { .min = 3, .max = 6 },
286 .m = { .min = 2, .max = 256 },
287 .m1 = { .min = 0, .max = 0 },
288 .m2 = { .min = 0, .max = 254 },
289 .p = { .min = 7, .max = 112 },
290 .p1 = { .min = 1, .max = 8 },
291 .p2 = { .dot_limit = 112000,
292 .p2_slow = 14, .p2_fast = 14 },
295 /* Ironlake / Sandybridge
297 * We calculate clock using (register_value + 2) for N/M1/M2, so here
298 * the range value for them is (actual_value - 2).
300 static const intel_limit_t intel_limits_ironlake_dac = {
301 .dot = { .min = 25000, .max = 350000 },
302 .vco = { .min = 1760000, .max = 3510000 },
303 .n = { .min = 1, .max = 5 },
304 .m = { .min = 79, .max = 127 },
305 .m1 = { .min = 12, .max = 22 },
306 .m2 = { .min = 5, .max = 9 },
307 .p = { .min = 5, .max = 80 },
308 .p1 = { .min = 1, .max = 8 },
309 .p2 = { .dot_limit = 225000,
310 .p2_slow = 10, .p2_fast = 5 },
313 static const intel_limit_t intel_limits_ironlake_single_lvds = {
314 .dot = { .min = 25000, .max = 350000 },
315 .vco = { .min = 1760000, .max = 3510000 },
316 .n = { .min = 1, .max = 3 },
317 .m = { .min = 79, .max = 118 },
318 .m1 = { .min = 12, .max = 22 },
319 .m2 = { .min = 5, .max = 9 },
320 .p = { .min = 28, .max = 112 },
321 .p1 = { .min = 2, .max = 8 },
322 .p2 = { .dot_limit = 225000,
323 .p2_slow = 14, .p2_fast = 14 },
326 static const intel_limit_t intel_limits_ironlake_dual_lvds = {
327 .dot = { .min = 25000, .max = 350000 },
328 .vco = { .min = 1760000, .max = 3510000 },
329 .n = { .min = 1, .max = 3 },
330 .m = { .min = 79, .max = 127 },
331 .m1 = { .min = 12, .max = 22 },
332 .m2 = { .min = 5, .max = 9 },
333 .p = { .min = 14, .max = 56 },
334 .p1 = { .min = 2, .max = 8 },
335 .p2 = { .dot_limit = 225000,
336 .p2_slow = 7, .p2_fast = 7 },
339 /* LVDS 100mhz refclk limits. */
340 static const intel_limit_t intel_limits_ironlake_single_lvds_100m = {
341 .dot = { .min = 25000, .max = 350000 },
342 .vco = { .min = 1760000, .max = 3510000 },
343 .n = { .min = 1, .max = 2 },
344 .m = { .min = 79, .max = 126 },
345 .m1 = { .min = 12, .max = 22 },
346 .m2 = { .min = 5, .max = 9 },
347 .p = { .min = 28, .max = 112 },
348 .p1 = { .min = 2, .max = 8 },
349 .p2 = { .dot_limit = 225000,
350 .p2_slow = 14, .p2_fast = 14 },
353 static const intel_limit_t intel_limits_ironlake_dual_lvds_100m = {
354 .dot = { .min = 25000, .max = 350000 },
355 .vco = { .min = 1760000, .max = 3510000 },
356 .n = { .min = 1, .max = 3 },
357 .m = { .min = 79, .max = 126 },
358 .m1 = { .min = 12, .max = 22 },
359 .m2 = { .min = 5, .max = 9 },
360 .p = { .min = 14, .max = 42 },
361 .p1 = { .min = 2, .max = 6 },
362 .p2 = { .dot_limit = 225000,
363 .p2_slow = 7, .p2_fast = 7 },
366 static const intel_limit_t intel_limits_vlv = {
368 * These are the data rate limits (measured in fast clocks)
369 * since those are the strictest limits we have. The fast
370 * clock and actual rate limits are more relaxed, so checking
371 * them would make no difference.
373 .dot = { .min = 25000 * 5, .max = 270000 * 5 },
374 .vco = { .min = 4000000, .max = 6000000 },
375 .n = { .min = 1, .max = 7 },
376 .m1 = { .min = 2, .max = 3 },
377 .m2 = { .min = 11, .max = 156 },
378 .p1 = { .min = 2, .max = 3 },
379 .p2 = { .p2_slow = 2, .p2_fast = 20 }, /* slow=min, fast=max */
382 static const intel_limit_t intel_limits_chv = {
384 * These are the data rate limits (measured in fast clocks)
385 * since those are the strictest limits we have. The fast
386 * clock and actual rate limits are more relaxed, so checking
387 * them would make no difference.
389 .dot = { .min = 25000 * 5, .max = 540000 * 5},
390 .vco = { .min = 4860000, .max = 6700000 },
391 .n = { .min = 1, .max = 1 },
392 .m1 = { .min = 2, .max = 2 },
393 .m2 = { .min = 24 << 22, .max = 175 << 22 },
394 .p1 = { .min = 2, .max = 4 },
395 .p2 = { .p2_slow = 1, .p2_fast = 14 },
398 static void vlv_clock(int refclk, intel_clock_t *clock)
400 clock->m = clock->m1 * clock->m2;
401 clock->p = clock->p1 * clock->p2;
402 if (WARN_ON(clock->n == 0 || clock->p == 0))
404 clock->vco = DIV_ROUND_CLOSEST(refclk * clock->m, clock->n);
405 clock->dot = DIV_ROUND_CLOSEST(clock->vco, clock->p);
409 * Returns whether any output on the specified pipe is of the specified type
411 bool intel_pipe_has_type(struct intel_crtc *crtc, enum intel_output_type type)
413 struct drm_device *dev = crtc->base.dev;
414 struct intel_encoder *encoder;
416 for_each_encoder_on_crtc(dev, &crtc->base, encoder)
417 if (encoder->type == type)
424 * Returns whether any output on the specified pipe will have the specified
425 * type after a staged modeset is complete, i.e., the same as
426 * intel_pipe_has_type() but looking at encoder->new_crtc instead of
429 static bool intel_pipe_will_have_type(struct intel_crtc *crtc, int type)
431 struct drm_device *dev = crtc->base.dev;
432 struct intel_encoder *encoder;
434 for_each_intel_encoder(dev, encoder)
435 if (encoder->new_crtc == crtc && encoder->type == type)
441 static const intel_limit_t *intel_ironlake_limit(struct intel_crtc *crtc,
444 struct drm_device *dev = crtc->base.dev;
445 const intel_limit_t *limit;
447 if (intel_pipe_will_have_type(crtc, INTEL_OUTPUT_LVDS)) {
448 if (intel_is_dual_link_lvds(dev)) {
449 if (refclk == 100000)
450 limit = &intel_limits_ironlake_dual_lvds_100m;
452 limit = &intel_limits_ironlake_dual_lvds;
454 if (refclk == 100000)
455 limit = &intel_limits_ironlake_single_lvds_100m;
457 limit = &intel_limits_ironlake_single_lvds;
460 limit = &intel_limits_ironlake_dac;
465 static const intel_limit_t *intel_g4x_limit(struct intel_crtc *crtc)
467 struct drm_device *dev = crtc->base.dev;
468 const intel_limit_t *limit;
470 if (intel_pipe_will_have_type(crtc, INTEL_OUTPUT_LVDS)) {
471 if (intel_is_dual_link_lvds(dev))
472 limit = &intel_limits_g4x_dual_channel_lvds;
474 limit = &intel_limits_g4x_single_channel_lvds;
475 } else if (intel_pipe_will_have_type(crtc, INTEL_OUTPUT_HDMI) ||
476 intel_pipe_will_have_type(crtc, INTEL_OUTPUT_ANALOG)) {
477 limit = &intel_limits_g4x_hdmi;
478 } else if (intel_pipe_will_have_type(crtc, INTEL_OUTPUT_SDVO)) {
479 limit = &intel_limits_g4x_sdvo;
480 } else /* The option is for other outputs */
481 limit = &intel_limits_i9xx_sdvo;
486 static const intel_limit_t *intel_limit(struct intel_crtc *crtc, int refclk)
488 struct drm_device *dev = crtc->base.dev;
489 const intel_limit_t *limit;
491 if (HAS_PCH_SPLIT(dev))
492 limit = intel_ironlake_limit(crtc, refclk);
493 else if (IS_G4X(dev)) {
494 limit = intel_g4x_limit(crtc);
495 } else if (IS_PINEVIEW(dev)) {
496 if (intel_pipe_will_have_type(crtc, INTEL_OUTPUT_LVDS))
497 limit = &intel_limits_pineview_lvds;
499 limit = &intel_limits_pineview_sdvo;
500 } else if (IS_CHERRYVIEW(dev)) {
501 limit = &intel_limits_chv;
502 } else if (IS_VALLEYVIEW(dev)) {
503 limit = &intel_limits_vlv;
504 } else if (!IS_GEN2(dev)) {
505 if (intel_pipe_will_have_type(crtc, INTEL_OUTPUT_LVDS))
506 limit = &intel_limits_i9xx_lvds;
508 limit = &intel_limits_i9xx_sdvo;
510 if (intel_pipe_will_have_type(crtc, INTEL_OUTPUT_LVDS))
511 limit = &intel_limits_i8xx_lvds;
512 else if (intel_pipe_will_have_type(crtc, INTEL_OUTPUT_DVO))
513 limit = &intel_limits_i8xx_dvo;
515 limit = &intel_limits_i8xx_dac;
520 /* m1 is reserved as 0 in Pineview, n is a ring counter */
521 static void pineview_clock(int refclk, intel_clock_t *clock)
523 clock->m = clock->m2 + 2;
524 clock->p = clock->p1 * clock->p2;
525 if (WARN_ON(clock->n == 0 || clock->p == 0))
527 clock->vco = DIV_ROUND_CLOSEST(refclk * clock->m, clock->n);
528 clock->dot = DIV_ROUND_CLOSEST(clock->vco, clock->p);
531 static uint32_t i9xx_dpll_compute_m(struct dpll *dpll)
533 return 5 * (dpll->m1 + 2) + (dpll->m2 + 2);
536 static void i9xx_clock(int refclk, intel_clock_t *clock)
538 clock->m = i9xx_dpll_compute_m(clock);
539 clock->p = clock->p1 * clock->p2;
540 if (WARN_ON(clock->n + 2 == 0 || clock->p == 0))
542 clock->vco = DIV_ROUND_CLOSEST(refclk * clock->m, clock->n + 2);
543 clock->dot = DIV_ROUND_CLOSEST(clock->vco, clock->p);
546 static void chv_clock(int refclk, intel_clock_t *clock)
548 clock->m = clock->m1 * clock->m2;
549 clock->p = clock->p1 * clock->p2;
550 if (WARN_ON(clock->n == 0 || clock->p == 0))
552 clock->vco = DIV_ROUND_CLOSEST_ULL((uint64_t)refclk * clock->m,
554 clock->dot = DIV_ROUND_CLOSEST(clock->vco, clock->p);
557 #define INTELPllInvalid(s) do { /* DRM_DEBUG(s); */ return false; } while (0)
559 * Returns whether the given set of divisors are valid for a given refclk with
560 * the given connectors.
563 static bool intel_PLL_is_valid(struct drm_device *dev,
564 const intel_limit_t *limit,
565 const intel_clock_t *clock)
567 if (clock->n < limit->n.min || limit->n.max < clock->n)
568 INTELPllInvalid("n out of range\n");
569 if (clock->p1 < limit->p1.min || limit->p1.max < clock->p1)
570 INTELPllInvalid("p1 out of range\n");
571 if (clock->m2 < limit->m2.min || limit->m2.max < clock->m2)
572 INTELPllInvalid("m2 out of range\n");
573 if (clock->m1 < limit->m1.min || limit->m1.max < clock->m1)
574 INTELPllInvalid("m1 out of range\n");
576 if (!IS_PINEVIEW(dev) && !IS_VALLEYVIEW(dev))
577 if (clock->m1 <= clock->m2)
578 INTELPllInvalid("m1 <= m2\n");
580 if (!IS_VALLEYVIEW(dev)) {
581 if (clock->p < limit->p.min || limit->p.max < clock->p)
582 INTELPllInvalid("p out of range\n");
583 if (clock->m < limit->m.min || limit->m.max < clock->m)
584 INTELPllInvalid("m out of range\n");
587 if (clock->vco < limit->vco.min || limit->vco.max < clock->vco)
588 INTELPllInvalid("vco out of range\n");
589 /* XXX: We may need to be checking "Dot clock" depending on the multiplier,
590 * connector, etc., rather than just a single range.
592 if (clock->dot < limit->dot.min || limit->dot.max < clock->dot)
593 INTELPllInvalid("dot out of range\n");
599 i9xx_find_best_dpll(const intel_limit_t *limit, struct intel_crtc *crtc,
600 int target, int refclk, intel_clock_t *match_clock,
601 intel_clock_t *best_clock)
603 struct drm_device *dev = crtc->base.dev;
607 if (intel_pipe_will_have_type(crtc, INTEL_OUTPUT_LVDS)) {
609 * For LVDS just rely on its current settings for dual-channel.
610 * We haven't figured out how to reliably set up different
611 * single/dual channel state, if we even can.
613 if (intel_is_dual_link_lvds(dev))
614 clock.p2 = limit->p2.p2_fast;
616 clock.p2 = limit->p2.p2_slow;
618 if (target < limit->p2.dot_limit)
619 clock.p2 = limit->p2.p2_slow;
621 clock.p2 = limit->p2.p2_fast;
624 memset(best_clock, 0, sizeof(*best_clock));
626 for (clock.m1 = limit->m1.min; clock.m1 <= limit->m1.max;
628 for (clock.m2 = limit->m2.min;
629 clock.m2 <= limit->m2.max; clock.m2++) {
630 if (clock.m2 >= clock.m1)
632 for (clock.n = limit->n.min;
633 clock.n <= limit->n.max; clock.n++) {
634 for (clock.p1 = limit->p1.min;
635 clock.p1 <= limit->p1.max; clock.p1++) {
638 i9xx_clock(refclk, &clock);
639 if (!intel_PLL_is_valid(dev, limit,
643 clock.p != match_clock->p)
646 this_err = abs(clock.dot - target);
647 if (this_err < err) {
656 return (err != target);
660 pnv_find_best_dpll(const intel_limit_t *limit, struct intel_crtc *crtc,
661 int target, int refclk, intel_clock_t *match_clock,
662 intel_clock_t *best_clock)
664 struct drm_device *dev = crtc->base.dev;
668 if (intel_pipe_will_have_type(crtc, INTEL_OUTPUT_LVDS)) {
670 * For LVDS just rely on its current settings for dual-channel.
671 * We haven't figured out how to reliably set up different
672 * single/dual channel state, if we even can.
674 if (intel_is_dual_link_lvds(dev))
675 clock.p2 = limit->p2.p2_fast;
677 clock.p2 = limit->p2.p2_slow;
679 if (target < limit->p2.dot_limit)
680 clock.p2 = limit->p2.p2_slow;
682 clock.p2 = limit->p2.p2_fast;
685 memset(best_clock, 0, sizeof(*best_clock));
687 for (clock.m1 = limit->m1.min; clock.m1 <= limit->m1.max;
689 for (clock.m2 = limit->m2.min;
690 clock.m2 <= limit->m2.max; clock.m2++) {
691 for (clock.n = limit->n.min;
692 clock.n <= limit->n.max; clock.n++) {
693 for (clock.p1 = limit->p1.min;
694 clock.p1 <= limit->p1.max; clock.p1++) {
697 pineview_clock(refclk, &clock);
698 if (!intel_PLL_is_valid(dev, limit,
702 clock.p != match_clock->p)
705 this_err = abs(clock.dot - target);
706 if (this_err < err) {
715 return (err != target);
719 g4x_find_best_dpll(const intel_limit_t *limit, struct intel_crtc *crtc,
720 int target, int refclk, intel_clock_t *match_clock,
721 intel_clock_t *best_clock)
723 struct drm_device *dev = crtc->base.dev;
727 /* approximately equals target * 0.00585 */
728 int err_most = (target >> 8) + (target >> 9);
731 if (intel_pipe_will_have_type(crtc, INTEL_OUTPUT_LVDS)) {
732 if (intel_is_dual_link_lvds(dev))
733 clock.p2 = limit->p2.p2_fast;
735 clock.p2 = limit->p2.p2_slow;
737 if (target < limit->p2.dot_limit)
738 clock.p2 = limit->p2.p2_slow;
740 clock.p2 = limit->p2.p2_fast;
743 memset(best_clock, 0, sizeof(*best_clock));
744 max_n = limit->n.max;
745 /* based on hardware requirement, prefer smaller n to precision */
746 for (clock.n = limit->n.min; clock.n <= max_n; clock.n++) {
747 /* based on hardware requirement, prefere larger m1,m2 */
748 for (clock.m1 = limit->m1.max;
749 clock.m1 >= limit->m1.min; clock.m1--) {
750 for (clock.m2 = limit->m2.max;
751 clock.m2 >= limit->m2.min; clock.m2--) {
752 for (clock.p1 = limit->p1.max;
753 clock.p1 >= limit->p1.min; clock.p1--) {
756 i9xx_clock(refclk, &clock);
757 if (!intel_PLL_is_valid(dev, limit,
761 this_err = abs(clock.dot - target);
762 if (this_err < err_most) {
776 vlv_find_best_dpll(const intel_limit_t *limit, struct intel_crtc *crtc,
777 int target, int refclk, intel_clock_t *match_clock,
778 intel_clock_t *best_clock)
780 struct drm_device *dev = crtc->base.dev;
782 unsigned int bestppm = 1000000;
783 /* min update 19.2 MHz */
784 int max_n = min(limit->n.max, refclk / 19200);
787 target *= 5; /* fast clock */
789 memset(best_clock, 0, sizeof(*best_clock));
791 /* based on hardware requirement, prefer smaller n to precision */
792 for (clock.n = limit->n.min; clock.n <= max_n; clock.n++) {
793 for (clock.p1 = limit->p1.max; clock.p1 >= limit->p1.min; clock.p1--) {
794 for (clock.p2 = limit->p2.p2_fast; clock.p2 >= limit->p2.p2_slow;
795 clock.p2 -= clock.p2 > 10 ? 2 : 1) {
796 clock.p = clock.p1 * clock.p2;
797 /* based on hardware requirement, prefer bigger m1,m2 values */
798 for (clock.m1 = limit->m1.min; clock.m1 <= limit->m1.max; clock.m1++) {
799 unsigned int ppm, diff;
801 clock.m2 = DIV_ROUND_CLOSEST(target * clock.p * clock.n,
804 vlv_clock(refclk, &clock);
806 if (!intel_PLL_is_valid(dev, limit,
810 diff = abs(clock.dot - target);
811 ppm = div_u64(1000000ULL * diff, target);
813 if (ppm < 100 && clock.p > best_clock->p) {
819 if (bestppm >= 10 && ppm < bestppm - 10) {
833 chv_find_best_dpll(const intel_limit_t *limit, struct intel_crtc *crtc,
834 int target, int refclk, intel_clock_t *match_clock,
835 intel_clock_t *best_clock)
837 struct drm_device *dev = crtc->base.dev;
842 memset(best_clock, 0, sizeof(*best_clock));
845 * Based on hardware doc, the n always set to 1, and m1 always
846 * set to 2. If requires to support 200Mhz refclk, we need to
847 * revisit this because n may not 1 anymore.
849 clock.n = 1, clock.m1 = 2;
850 target *= 5; /* fast clock */
852 for (clock.p1 = limit->p1.max; clock.p1 >= limit->p1.min; clock.p1--) {
853 for (clock.p2 = limit->p2.p2_fast;
854 clock.p2 >= limit->p2.p2_slow;
855 clock.p2 -= clock.p2 > 10 ? 2 : 1) {
857 clock.p = clock.p1 * clock.p2;
859 m2 = DIV_ROUND_CLOSEST_ULL(((uint64_t)target * clock.p *
860 clock.n) << 22, refclk * clock.m1);
862 if (m2 > INT_MAX/clock.m1)
867 chv_clock(refclk, &clock);
869 if (!intel_PLL_is_valid(dev, limit, &clock))
872 /* based on hardware requirement, prefer bigger p
874 if (clock.p > best_clock->p) {
884 bool intel_crtc_active(struct drm_crtc *crtc)
886 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
888 /* Be paranoid as we can arrive here with only partial
889 * state retrieved from the hardware during setup.
891 * We can ditch the adjusted_mode.crtc_clock check as soon
892 * as Haswell has gained clock readout/fastboot support.
894 * We can ditch the crtc->primary->fb check as soon as we can
895 * properly reconstruct framebuffers.
897 return intel_crtc->active && crtc->primary->fb &&
898 intel_crtc->config.adjusted_mode.crtc_clock;
901 enum transcoder intel_pipe_to_cpu_transcoder(struct drm_i915_private *dev_priv,
904 struct drm_crtc *crtc = dev_priv->pipe_to_crtc_mapping[pipe];
905 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
907 return intel_crtc->config.cpu_transcoder;
910 static bool pipe_dsl_stopped(struct drm_device *dev, enum pipe pipe)
912 struct drm_i915_private *dev_priv = dev->dev_private;
913 u32 reg = PIPEDSL(pipe);
918 line_mask = DSL_LINEMASK_GEN2;
920 line_mask = DSL_LINEMASK_GEN3;
922 line1 = I915_READ(reg) & line_mask;
924 line2 = I915_READ(reg) & line_mask;
926 return line1 == line2;
930 * intel_wait_for_pipe_off - wait for pipe to turn off
931 * @crtc: crtc whose pipe to wait for
933 * After disabling a pipe, we can't wait for vblank in the usual way,
934 * spinning on the vblank interrupt status bit, since we won't actually
935 * see an interrupt when the pipe is disabled.
938 * wait for the pipe register state bit to turn off
941 * wait for the display line value to settle (it usually
942 * ends up stopping at the start of the next frame).
945 static void intel_wait_for_pipe_off(struct intel_crtc *crtc)
947 struct drm_device *dev = crtc->base.dev;
948 struct drm_i915_private *dev_priv = dev->dev_private;
949 enum transcoder cpu_transcoder = crtc->config.cpu_transcoder;
950 enum pipe pipe = crtc->pipe;
952 if (INTEL_INFO(dev)->gen >= 4) {
953 int reg = PIPECONF(cpu_transcoder);
955 /* Wait for the Pipe State to go off */
956 if (wait_for((I915_READ(reg) & I965_PIPECONF_ACTIVE) == 0,
958 WARN(1, "pipe_off wait timed out\n");
960 /* Wait for the display line to settle */
961 if (wait_for(pipe_dsl_stopped(dev, pipe), 100))
962 WARN(1, "pipe_off wait timed out\n");
967 * ibx_digital_port_connected - is the specified port connected?
968 * @dev_priv: i915 private structure
969 * @port: the port to test
971 * Returns true if @port is connected, false otherwise.
973 bool ibx_digital_port_connected(struct drm_i915_private *dev_priv,
974 struct intel_digital_port *port)
978 if (HAS_PCH_IBX(dev_priv->dev)) {
979 switch (port->port) {
981 bit = SDE_PORTB_HOTPLUG;
984 bit = SDE_PORTC_HOTPLUG;
987 bit = SDE_PORTD_HOTPLUG;
993 switch (port->port) {
995 bit = SDE_PORTB_HOTPLUG_CPT;
998 bit = SDE_PORTC_HOTPLUG_CPT;
1001 bit = SDE_PORTD_HOTPLUG_CPT;
1008 return I915_READ(SDEISR) & bit;
1011 static const char *state_string(bool enabled)
1013 return enabled ? "on" : "off";
1016 /* Only for pre-ILK configs */
1017 void assert_pll(struct drm_i915_private *dev_priv,
1018 enum pipe pipe, bool state)
1025 val = I915_READ(reg);
1026 cur_state = !!(val & DPLL_VCO_ENABLE);
1027 WARN(cur_state != state,
1028 "PLL state assertion failure (expected %s, current %s)\n",
1029 state_string(state), state_string(cur_state));
1032 /* XXX: the dsi pll is shared between MIPI DSI ports */
1033 static void assert_dsi_pll(struct drm_i915_private *dev_priv, bool state)
1038 mutex_lock(&dev_priv->dpio_lock);
1039 val = vlv_cck_read(dev_priv, CCK_REG_DSI_PLL_CONTROL);
1040 mutex_unlock(&dev_priv->dpio_lock);
1042 cur_state = val & DSI_PLL_VCO_EN;
1043 WARN(cur_state != state,
1044 "DSI PLL state assertion failure (expected %s, current %s)\n",
1045 state_string(state), state_string(cur_state));
1047 #define assert_dsi_pll_enabled(d) assert_dsi_pll(d, true)
1048 #define assert_dsi_pll_disabled(d) assert_dsi_pll(d, false)
1050 struct intel_shared_dpll *
1051 intel_crtc_to_shared_dpll(struct intel_crtc *crtc)
1053 struct drm_i915_private *dev_priv = crtc->base.dev->dev_private;
1055 if (crtc->config.shared_dpll < 0)
1058 return &dev_priv->shared_dplls[crtc->config.shared_dpll];
1062 void assert_shared_dpll(struct drm_i915_private *dev_priv,
1063 struct intel_shared_dpll *pll,
1067 struct intel_dpll_hw_state hw_state;
1070 "asserting DPLL %s with no DPLL\n", state_string(state)))
1073 cur_state = pll->get_hw_state(dev_priv, pll, &hw_state);
1074 WARN(cur_state != state,
1075 "%s assertion failure (expected %s, current %s)\n",
1076 pll->name, state_string(state), state_string(cur_state));
1079 static void assert_fdi_tx(struct drm_i915_private *dev_priv,
1080 enum pipe pipe, bool state)
1085 enum transcoder cpu_transcoder = intel_pipe_to_cpu_transcoder(dev_priv,
1088 if (HAS_DDI(dev_priv->dev)) {
1089 /* DDI does not have a specific FDI_TX register */
1090 reg = TRANS_DDI_FUNC_CTL(cpu_transcoder);
1091 val = I915_READ(reg);
1092 cur_state = !!(val & TRANS_DDI_FUNC_ENABLE);
1094 reg = FDI_TX_CTL(pipe);
1095 val = I915_READ(reg);
1096 cur_state = !!(val & FDI_TX_ENABLE);
1098 WARN(cur_state != state,
1099 "FDI TX state assertion failure (expected %s, current %s)\n",
1100 state_string(state), state_string(cur_state));
1102 #define assert_fdi_tx_enabled(d, p) assert_fdi_tx(d, p, true)
1103 #define assert_fdi_tx_disabled(d, p) assert_fdi_tx(d, p, false)
1105 static void assert_fdi_rx(struct drm_i915_private *dev_priv,
1106 enum pipe pipe, bool state)
1112 reg = FDI_RX_CTL(pipe);
1113 val = I915_READ(reg);
1114 cur_state = !!(val & FDI_RX_ENABLE);
1115 WARN(cur_state != state,
1116 "FDI RX state assertion failure (expected %s, current %s)\n",
1117 state_string(state), state_string(cur_state));
1119 #define assert_fdi_rx_enabled(d, p) assert_fdi_rx(d, p, true)
1120 #define assert_fdi_rx_disabled(d, p) assert_fdi_rx(d, p, false)
1122 static void assert_fdi_tx_pll_enabled(struct drm_i915_private *dev_priv,
1128 /* ILK FDI PLL is always enabled */
1129 if (INTEL_INFO(dev_priv->dev)->gen == 5)
1132 /* On Haswell, DDI ports are responsible for the FDI PLL setup */
1133 if (HAS_DDI(dev_priv->dev))
1136 reg = FDI_TX_CTL(pipe);
1137 val = I915_READ(reg);
1138 WARN(!(val & FDI_TX_PLL_ENABLE), "FDI TX PLL assertion failure, should be active but is disabled\n");
1141 void assert_fdi_rx_pll(struct drm_i915_private *dev_priv,
1142 enum pipe pipe, bool state)
1148 reg = FDI_RX_CTL(pipe);
1149 val = I915_READ(reg);
1150 cur_state = !!(val & FDI_RX_PLL_ENABLE);
1151 WARN(cur_state != state,
1152 "FDI RX PLL assertion failure (expected %s, current %s)\n",
1153 state_string(state), state_string(cur_state));
1156 void assert_panel_unlocked(struct drm_i915_private *dev_priv,
1159 struct drm_device *dev = dev_priv->dev;
1162 enum pipe panel_pipe = PIPE_A;
1165 if (WARN_ON(HAS_DDI(dev)))
1168 if (HAS_PCH_SPLIT(dev)) {
1171 pp_reg = PCH_PP_CONTROL;
1172 port_sel = I915_READ(PCH_PP_ON_DELAYS) & PANEL_PORT_SELECT_MASK;
1174 if (port_sel == PANEL_PORT_SELECT_LVDS &&
1175 I915_READ(PCH_LVDS) & LVDS_PIPEB_SELECT)
1176 panel_pipe = PIPE_B;
1177 /* XXX: else fix for eDP */
1178 } else if (IS_VALLEYVIEW(dev)) {
1179 /* presumably write lock depends on pipe, not port select */
1180 pp_reg = VLV_PIPE_PP_CONTROL(pipe);
1183 pp_reg = PP_CONTROL;
1184 if (I915_READ(LVDS) & LVDS_PIPEB_SELECT)
1185 panel_pipe = PIPE_B;
1188 val = I915_READ(pp_reg);
1189 if (!(val & PANEL_POWER_ON) ||
1190 ((val & PANEL_UNLOCK_MASK) == PANEL_UNLOCK_REGS))
1193 WARN(panel_pipe == pipe && locked,
1194 "panel assertion failure, pipe %c regs locked\n",
1198 static void assert_cursor(struct drm_i915_private *dev_priv,
1199 enum pipe pipe, bool state)
1201 struct drm_device *dev = dev_priv->dev;
1204 if (IS_845G(dev) || IS_I865G(dev))
1205 cur_state = I915_READ(_CURACNTR) & CURSOR_ENABLE;
1207 cur_state = I915_READ(CURCNTR(pipe)) & CURSOR_MODE;
1209 WARN(cur_state != state,
1210 "cursor on pipe %c assertion failure (expected %s, current %s)\n",
1211 pipe_name(pipe), state_string(state), state_string(cur_state));
1213 #define assert_cursor_enabled(d, p) assert_cursor(d, p, true)
1214 #define assert_cursor_disabled(d, p) assert_cursor(d, p, false)
1216 void assert_pipe(struct drm_i915_private *dev_priv,
1217 enum pipe pipe, bool state)
1222 enum transcoder cpu_transcoder = intel_pipe_to_cpu_transcoder(dev_priv,
1225 /* if we need the pipe quirk it must be always on */
1226 if ((pipe == PIPE_A && dev_priv->quirks & QUIRK_PIPEA_FORCE) ||
1227 (pipe == PIPE_B && dev_priv->quirks & QUIRK_PIPEB_FORCE))
1230 if (!intel_display_power_is_enabled(dev_priv,
1231 POWER_DOMAIN_TRANSCODER(cpu_transcoder))) {
1234 reg = PIPECONF(cpu_transcoder);
1235 val = I915_READ(reg);
1236 cur_state = !!(val & PIPECONF_ENABLE);
1239 WARN(cur_state != state,
1240 "pipe %c assertion failure (expected %s, current %s)\n",
1241 pipe_name(pipe), state_string(state), state_string(cur_state));
1244 static void assert_plane(struct drm_i915_private *dev_priv,
1245 enum plane plane, bool state)
1251 reg = DSPCNTR(plane);
1252 val = I915_READ(reg);
1253 cur_state = !!(val & DISPLAY_PLANE_ENABLE);
1254 WARN(cur_state != state,
1255 "plane %c assertion failure (expected %s, current %s)\n",
1256 plane_name(plane), state_string(state), state_string(cur_state));
1259 #define assert_plane_enabled(d, p) assert_plane(d, p, true)
1260 #define assert_plane_disabled(d, p) assert_plane(d, p, false)
1262 static void assert_planes_disabled(struct drm_i915_private *dev_priv,
1265 struct drm_device *dev = dev_priv->dev;
1270 /* Primary planes are fixed to pipes on gen4+ */
1271 if (INTEL_INFO(dev)->gen >= 4) {
1272 reg = DSPCNTR(pipe);
1273 val = I915_READ(reg);
1274 WARN(val & DISPLAY_PLANE_ENABLE,
1275 "plane %c assertion failure, should be disabled but not\n",
1280 /* Need to check both planes against the pipe */
1281 for_each_pipe(dev_priv, i) {
1283 val = I915_READ(reg);
1284 cur_pipe = (val & DISPPLANE_SEL_PIPE_MASK) >>
1285 DISPPLANE_SEL_PIPE_SHIFT;
1286 WARN((val & DISPLAY_PLANE_ENABLE) && pipe == cur_pipe,
1287 "plane %c assertion failure, should be off on pipe %c but is still active\n",
1288 plane_name(i), pipe_name(pipe));
1292 static void assert_sprites_disabled(struct drm_i915_private *dev_priv,
1295 struct drm_device *dev = dev_priv->dev;
1299 if (INTEL_INFO(dev)->gen >= 9) {
1300 for_each_sprite(pipe, sprite) {
1301 val = I915_READ(PLANE_CTL(pipe, sprite));
1302 WARN(val & PLANE_CTL_ENABLE,
1303 "plane %d assertion failure, should be off on pipe %c but is still active\n",
1304 sprite, pipe_name(pipe));
1306 } else if (IS_VALLEYVIEW(dev)) {
1307 for_each_sprite(pipe, sprite) {
1308 reg = SPCNTR(pipe, sprite);
1309 val = I915_READ(reg);
1310 WARN(val & SP_ENABLE,
1311 "sprite %c assertion failure, should be off on pipe %c but is still active\n",
1312 sprite_name(pipe, sprite), pipe_name(pipe));
1314 } else if (INTEL_INFO(dev)->gen >= 7) {
1316 val = I915_READ(reg);
1317 WARN(val & SPRITE_ENABLE,
1318 "sprite %c assertion failure, should be off on pipe %c but is still active\n",
1319 plane_name(pipe), pipe_name(pipe));
1320 } else if (INTEL_INFO(dev)->gen >= 5) {
1321 reg = DVSCNTR(pipe);
1322 val = I915_READ(reg);
1323 WARN(val & DVS_ENABLE,
1324 "sprite %c assertion failure, should be off on pipe %c but is still active\n",
1325 plane_name(pipe), pipe_name(pipe));
1329 static void assert_vblank_disabled(struct drm_crtc *crtc)
1331 if (WARN_ON(drm_crtc_vblank_get(crtc) == 0))
1332 drm_crtc_vblank_put(crtc);
1335 static void ibx_assert_pch_refclk_enabled(struct drm_i915_private *dev_priv)
1340 WARN_ON(!(HAS_PCH_IBX(dev_priv->dev) || HAS_PCH_CPT(dev_priv->dev)));
1342 val = I915_READ(PCH_DREF_CONTROL);
1343 enabled = !!(val & (DREF_SSC_SOURCE_MASK | DREF_NONSPREAD_SOURCE_MASK |
1344 DREF_SUPERSPREAD_SOURCE_MASK));
1345 WARN(!enabled, "PCH refclk assertion failure, should be active but is disabled\n");
1348 static void assert_pch_transcoder_disabled(struct drm_i915_private *dev_priv,
1355 reg = PCH_TRANSCONF(pipe);
1356 val = I915_READ(reg);
1357 enabled = !!(val & TRANS_ENABLE);
1359 "transcoder assertion failed, should be off on pipe %c but is still active\n",
1363 static bool dp_pipe_enabled(struct drm_i915_private *dev_priv,
1364 enum pipe pipe, u32 port_sel, u32 val)
1366 if ((val & DP_PORT_EN) == 0)
1369 if (HAS_PCH_CPT(dev_priv->dev)) {
1370 u32 trans_dp_ctl_reg = TRANS_DP_CTL(pipe);
1371 u32 trans_dp_ctl = I915_READ(trans_dp_ctl_reg);
1372 if ((trans_dp_ctl & TRANS_DP_PORT_SEL_MASK) != port_sel)
1374 } else if (IS_CHERRYVIEW(dev_priv->dev)) {
1375 if ((val & DP_PIPE_MASK_CHV) != DP_PIPE_SELECT_CHV(pipe))
1378 if ((val & DP_PIPE_MASK) != (pipe << 30))
1384 static bool hdmi_pipe_enabled(struct drm_i915_private *dev_priv,
1385 enum pipe pipe, u32 val)
1387 if ((val & SDVO_ENABLE) == 0)
1390 if (HAS_PCH_CPT(dev_priv->dev)) {
1391 if ((val & SDVO_PIPE_SEL_MASK_CPT) != SDVO_PIPE_SEL_CPT(pipe))
1393 } else if (IS_CHERRYVIEW(dev_priv->dev)) {
1394 if ((val & SDVO_PIPE_SEL_MASK_CHV) != SDVO_PIPE_SEL_CHV(pipe))
1397 if ((val & SDVO_PIPE_SEL_MASK) != SDVO_PIPE_SEL(pipe))
1403 static bool lvds_pipe_enabled(struct drm_i915_private *dev_priv,
1404 enum pipe pipe, u32 val)
1406 if ((val & LVDS_PORT_EN) == 0)
1409 if (HAS_PCH_CPT(dev_priv->dev)) {
1410 if ((val & PORT_TRANS_SEL_MASK) != PORT_TRANS_SEL_CPT(pipe))
1413 if ((val & LVDS_PIPE_MASK) != LVDS_PIPE(pipe))
1419 static bool adpa_pipe_enabled(struct drm_i915_private *dev_priv,
1420 enum pipe pipe, u32 val)
1422 if ((val & ADPA_DAC_ENABLE) == 0)
1424 if (HAS_PCH_CPT(dev_priv->dev)) {
1425 if ((val & PORT_TRANS_SEL_MASK) != PORT_TRANS_SEL_CPT(pipe))
1428 if ((val & ADPA_PIPE_SELECT_MASK) != ADPA_PIPE_SELECT(pipe))
1434 static void assert_pch_dp_disabled(struct drm_i915_private *dev_priv,
1435 enum pipe pipe, int reg, u32 port_sel)
1437 u32 val = I915_READ(reg);
1438 WARN(dp_pipe_enabled(dev_priv, pipe, port_sel, val),
1439 "PCH DP (0x%08x) enabled on transcoder %c, should be disabled\n",
1440 reg, pipe_name(pipe));
1442 WARN(HAS_PCH_IBX(dev_priv->dev) && (val & DP_PORT_EN) == 0
1443 && (val & DP_PIPEB_SELECT),
1444 "IBX PCH dp port still using transcoder B\n");
1447 static void assert_pch_hdmi_disabled(struct drm_i915_private *dev_priv,
1448 enum pipe pipe, int reg)
1450 u32 val = I915_READ(reg);
1451 WARN(hdmi_pipe_enabled(dev_priv, pipe, val),
1452 "PCH HDMI (0x%08x) enabled on transcoder %c, should be disabled\n",
1453 reg, pipe_name(pipe));
1455 WARN(HAS_PCH_IBX(dev_priv->dev) && (val & SDVO_ENABLE) == 0
1456 && (val & SDVO_PIPE_B_SELECT),
1457 "IBX PCH hdmi port still using transcoder B\n");
1460 static void assert_pch_ports_disabled(struct drm_i915_private *dev_priv,
1466 assert_pch_dp_disabled(dev_priv, pipe, PCH_DP_B, TRANS_DP_PORT_SEL_B);
1467 assert_pch_dp_disabled(dev_priv, pipe, PCH_DP_C, TRANS_DP_PORT_SEL_C);
1468 assert_pch_dp_disabled(dev_priv, pipe, PCH_DP_D, TRANS_DP_PORT_SEL_D);
1471 val = I915_READ(reg);
1472 WARN(adpa_pipe_enabled(dev_priv, pipe, val),
1473 "PCH VGA enabled on transcoder %c, should be disabled\n",
1477 val = I915_READ(reg);
1478 WARN(lvds_pipe_enabled(dev_priv, pipe, val),
1479 "PCH LVDS enabled on transcoder %c, should be disabled\n",
1482 assert_pch_hdmi_disabled(dev_priv, pipe, PCH_HDMIB);
1483 assert_pch_hdmi_disabled(dev_priv, pipe, PCH_HDMIC);
1484 assert_pch_hdmi_disabled(dev_priv, pipe, PCH_HDMID);
1487 static void intel_init_dpio(struct drm_device *dev)
1489 struct drm_i915_private *dev_priv = dev->dev_private;
1491 if (!IS_VALLEYVIEW(dev))
1495 * IOSF_PORT_DPIO is used for VLV x2 PHY (DP/HDMI B and C),
1496 * CHV x1 PHY (DP/HDMI D)
1497 * IOSF_PORT_DPIO_2 is used for CHV x2 PHY (DP/HDMI B and C)
1499 if (IS_CHERRYVIEW(dev)) {
1500 DPIO_PHY_IOSF_PORT(DPIO_PHY0) = IOSF_PORT_DPIO_2;
1501 DPIO_PHY_IOSF_PORT(DPIO_PHY1) = IOSF_PORT_DPIO;
1503 DPIO_PHY_IOSF_PORT(DPIO_PHY0) = IOSF_PORT_DPIO;
1507 static void vlv_enable_pll(struct intel_crtc *crtc,
1508 const struct intel_crtc_config *pipe_config)
1510 struct drm_device *dev = crtc->base.dev;
1511 struct drm_i915_private *dev_priv = dev->dev_private;
1512 int reg = DPLL(crtc->pipe);
1513 u32 dpll = pipe_config->dpll_hw_state.dpll;
1515 assert_pipe_disabled(dev_priv, crtc->pipe);
1517 /* No really, not for ILK+ */
1518 BUG_ON(!IS_VALLEYVIEW(dev_priv->dev));
1520 /* PLL is protected by panel, make sure we can write it */
1521 if (IS_MOBILE(dev_priv->dev))
1522 assert_panel_unlocked(dev_priv, crtc->pipe);
1524 I915_WRITE(reg, dpll);
1528 if (wait_for(((I915_READ(reg) & DPLL_LOCK_VLV) == DPLL_LOCK_VLV), 1))
1529 DRM_ERROR("DPLL %d failed to lock\n", crtc->pipe);
1531 I915_WRITE(DPLL_MD(crtc->pipe), pipe_config->dpll_hw_state.dpll_md);
1532 POSTING_READ(DPLL_MD(crtc->pipe));
1534 /* We do this three times for luck */
1535 I915_WRITE(reg, dpll);
1537 udelay(150); /* wait for warmup */
1538 I915_WRITE(reg, dpll);
1540 udelay(150); /* wait for warmup */
1541 I915_WRITE(reg, dpll);
1543 udelay(150); /* wait for warmup */
1546 static void chv_enable_pll(struct intel_crtc *crtc,
1547 const struct intel_crtc_config *pipe_config)
1549 struct drm_device *dev = crtc->base.dev;
1550 struct drm_i915_private *dev_priv = dev->dev_private;
1551 int pipe = crtc->pipe;
1552 enum dpio_channel port = vlv_pipe_to_channel(pipe);
1555 assert_pipe_disabled(dev_priv, crtc->pipe);
1557 BUG_ON(!IS_CHERRYVIEW(dev_priv->dev));
1559 mutex_lock(&dev_priv->dpio_lock);
1561 /* Enable back the 10bit clock to display controller */
1562 tmp = vlv_dpio_read(dev_priv, pipe, CHV_CMN_DW14(port));
1563 tmp |= DPIO_DCLKP_EN;
1564 vlv_dpio_write(dev_priv, pipe, CHV_CMN_DW14(port), tmp);
1567 * Need to wait > 100ns between dclkp clock enable bit and PLL enable.
1572 I915_WRITE(DPLL(pipe), pipe_config->dpll_hw_state.dpll);
1574 /* Check PLL is locked */
1575 if (wait_for(((I915_READ(DPLL(pipe)) & DPLL_LOCK_VLV) == DPLL_LOCK_VLV), 1))
1576 DRM_ERROR("PLL %d failed to lock\n", pipe);
1578 /* not sure when this should be written */
1579 I915_WRITE(DPLL_MD(pipe), pipe_config->dpll_hw_state.dpll_md);
1580 POSTING_READ(DPLL_MD(pipe));
1582 mutex_unlock(&dev_priv->dpio_lock);
1585 static int intel_num_dvo_pipes(struct drm_device *dev)
1587 struct intel_crtc *crtc;
1590 for_each_intel_crtc(dev, crtc)
1591 count += crtc->active &&
1592 intel_pipe_has_type(crtc, INTEL_OUTPUT_DVO);
1597 static void i9xx_enable_pll(struct intel_crtc *crtc)
1599 struct drm_device *dev = crtc->base.dev;
1600 struct drm_i915_private *dev_priv = dev->dev_private;
1601 int reg = DPLL(crtc->pipe);
1602 u32 dpll = crtc->config.dpll_hw_state.dpll;
1604 assert_pipe_disabled(dev_priv, crtc->pipe);
1606 /* No really, not for ILK+ */
1607 BUG_ON(INTEL_INFO(dev)->gen >= 5);
1609 /* PLL is protected by panel, make sure we can write it */
1610 if (IS_MOBILE(dev) && !IS_I830(dev))
1611 assert_panel_unlocked(dev_priv, crtc->pipe);
1613 /* Enable DVO 2x clock on both PLLs if necessary */
1614 if (IS_I830(dev) && intel_num_dvo_pipes(dev) > 0) {
1616 * It appears to be important that we don't enable this
1617 * for the current pipe before otherwise configuring the
1618 * PLL. No idea how this should be handled if multiple
1619 * DVO outputs are enabled simultaneosly.
1621 dpll |= DPLL_DVO_2X_MODE;
1622 I915_WRITE(DPLL(!crtc->pipe),
1623 I915_READ(DPLL(!crtc->pipe)) | DPLL_DVO_2X_MODE);
1626 /* Wait for the clocks to stabilize. */
1630 if (INTEL_INFO(dev)->gen >= 4) {
1631 I915_WRITE(DPLL_MD(crtc->pipe),
1632 crtc->config.dpll_hw_state.dpll_md);
1634 /* The pixel multiplier can only be updated once the
1635 * DPLL is enabled and the clocks are stable.
1637 * So write it again.
1639 I915_WRITE(reg, dpll);
1642 /* We do this three times for luck */
1643 I915_WRITE(reg, dpll);
1645 udelay(150); /* wait for warmup */
1646 I915_WRITE(reg, dpll);
1648 udelay(150); /* wait for warmup */
1649 I915_WRITE(reg, dpll);
1651 udelay(150); /* wait for warmup */
1655 * i9xx_disable_pll - disable a PLL
1656 * @dev_priv: i915 private structure
1657 * @pipe: pipe PLL to disable
1659 * Disable the PLL for @pipe, making sure the pipe is off first.
1661 * Note! This is for pre-ILK only.
1663 static void i9xx_disable_pll(struct intel_crtc *crtc)
1665 struct drm_device *dev = crtc->base.dev;
1666 struct drm_i915_private *dev_priv = dev->dev_private;
1667 enum pipe pipe = crtc->pipe;
1669 /* Disable DVO 2x clock on both PLLs if necessary */
1671 intel_pipe_has_type(crtc, INTEL_OUTPUT_DVO) &&
1672 intel_num_dvo_pipes(dev) == 1) {
1673 I915_WRITE(DPLL(PIPE_B),
1674 I915_READ(DPLL(PIPE_B)) & ~DPLL_DVO_2X_MODE);
1675 I915_WRITE(DPLL(PIPE_A),
1676 I915_READ(DPLL(PIPE_A)) & ~DPLL_DVO_2X_MODE);
1679 /* Don't disable pipe or pipe PLLs if needed */
1680 if ((pipe == PIPE_A && dev_priv->quirks & QUIRK_PIPEA_FORCE) ||
1681 (pipe == PIPE_B && dev_priv->quirks & QUIRK_PIPEB_FORCE))
1684 /* Make sure the pipe isn't still relying on us */
1685 assert_pipe_disabled(dev_priv, pipe);
1687 I915_WRITE(DPLL(pipe), 0);
1688 POSTING_READ(DPLL(pipe));
1691 static void vlv_disable_pll(struct drm_i915_private *dev_priv, enum pipe pipe)
1695 /* Make sure the pipe isn't still relying on us */
1696 assert_pipe_disabled(dev_priv, pipe);
1699 * Leave integrated clock source and reference clock enabled for pipe B.
1700 * The latter is needed for VGA hotplug / manual detection.
1703 val = DPLL_INTEGRATED_CRI_CLK_VLV | DPLL_REFA_CLK_ENABLE_VLV;
1704 I915_WRITE(DPLL(pipe), val);
1705 POSTING_READ(DPLL(pipe));
1709 static void chv_disable_pll(struct drm_i915_private *dev_priv, enum pipe pipe)
1711 enum dpio_channel port = vlv_pipe_to_channel(pipe);
1714 /* Make sure the pipe isn't still relying on us */
1715 assert_pipe_disabled(dev_priv, pipe);
1717 /* Set PLL en = 0 */
1718 val = DPLL_SSC_REF_CLOCK_CHV | DPLL_REFA_CLK_ENABLE_VLV;
1720 val |= DPLL_INTEGRATED_CRI_CLK_VLV;
1721 I915_WRITE(DPLL(pipe), val);
1722 POSTING_READ(DPLL(pipe));
1724 mutex_lock(&dev_priv->dpio_lock);
1726 /* Disable 10bit clock to display controller */
1727 val = vlv_dpio_read(dev_priv, pipe, CHV_CMN_DW14(port));
1728 val &= ~DPIO_DCLKP_EN;
1729 vlv_dpio_write(dev_priv, pipe, CHV_CMN_DW14(port), val);
1731 /* disable left/right clock distribution */
1732 if (pipe != PIPE_B) {
1733 val = vlv_dpio_read(dev_priv, pipe, _CHV_CMN_DW5_CH0);
1734 val &= ~(CHV_BUFLEFTENA1_MASK | CHV_BUFRIGHTENA1_MASK);
1735 vlv_dpio_write(dev_priv, pipe, _CHV_CMN_DW5_CH0, val);
1737 val = vlv_dpio_read(dev_priv, pipe, _CHV_CMN_DW1_CH1);
1738 val &= ~(CHV_BUFLEFTENA2_MASK | CHV_BUFRIGHTENA2_MASK);
1739 vlv_dpio_write(dev_priv, pipe, _CHV_CMN_DW1_CH1, val);
1742 mutex_unlock(&dev_priv->dpio_lock);
1745 void vlv_wait_port_ready(struct drm_i915_private *dev_priv,
1746 struct intel_digital_port *dport)
1751 switch (dport->port) {
1753 port_mask = DPLL_PORTB_READY_MASK;
1757 port_mask = DPLL_PORTC_READY_MASK;
1761 port_mask = DPLL_PORTD_READY_MASK;
1762 dpll_reg = DPIO_PHY_STATUS;
1768 if (wait_for((I915_READ(dpll_reg) & port_mask) == 0, 1000))
1769 WARN(1, "timed out waiting for port %c ready: 0x%08x\n",
1770 port_name(dport->port), I915_READ(dpll_reg));
1773 static void intel_prepare_shared_dpll(struct intel_crtc *crtc)
1775 struct drm_device *dev = crtc->base.dev;
1776 struct drm_i915_private *dev_priv = dev->dev_private;
1777 struct intel_shared_dpll *pll = intel_crtc_to_shared_dpll(crtc);
1779 if (WARN_ON(pll == NULL))
1782 WARN_ON(!pll->config.crtc_mask);
1783 if (pll->active == 0) {
1784 DRM_DEBUG_DRIVER("setting up %s\n", pll->name);
1786 assert_shared_dpll_disabled(dev_priv, pll);
1788 pll->mode_set(dev_priv, pll);
1793 * intel_enable_shared_dpll - enable PCH PLL
1794 * @dev_priv: i915 private structure
1795 * @pipe: pipe PLL to enable
1797 * The PCH PLL needs to be enabled before the PCH transcoder, since it
1798 * drives the transcoder clock.
1800 static void intel_enable_shared_dpll(struct intel_crtc *crtc)
1802 struct drm_device *dev = crtc->base.dev;
1803 struct drm_i915_private *dev_priv = dev->dev_private;
1804 struct intel_shared_dpll *pll = intel_crtc_to_shared_dpll(crtc);
1806 if (WARN_ON(pll == NULL))
1809 if (WARN_ON(pll->config.crtc_mask == 0))
1812 DRM_DEBUG_KMS("enable %s (active %d, on? %d) for crtc %d\n",
1813 pll->name, pll->active, pll->on,
1814 crtc->base.base.id);
1816 if (pll->active++) {
1818 assert_shared_dpll_enabled(dev_priv, pll);
1823 intel_display_power_get(dev_priv, POWER_DOMAIN_PLLS);
1825 DRM_DEBUG_KMS("enabling %s\n", pll->name);
1826 pll->enable(dev_priv, pll);
1830 static void intel_disable_shared_dpll(struct intel_crtc *crtc)
1832 struct drm_device *dev = crtc->base.dev;
1833 struct drm_i915_private *dev_priv = dev->dev_private;
1834 struct intel_shared_dpll *pll = intel_crtc_to_shared_dpll(crtc);
1836 /* PCH only available on ILK+ */
1837 BUG_ON(INTEL_INFO(dev)->gen < 5);
1838 if (WARN_ON(pll == NULL))
1841 if (WARN_ON(pll->config.crtc_mask == 0))
1844 DRM_DEBUG_KMS("disable %s (active %d, on? %d) for crtc %d\n",
1845 pll->name, pll->active, pll->on,
1846 crtc->base.base.id);
1848 if (WARN_ON(pll->active == 0)) {
1849 assert_shared_dpll_disabled(dev_priv, pll);
1853 assert_shared_dpll_enabled(dev_priv, pll);
1858 DRM_DEBUG_KMS("disabling %s\n", pll->name);
1859 pll->disable(dev_priv, pll);
1862 intel_display_power_put(dev_priv, POWER_DOMAIN_PLLS);
1865 static void ironlake_enable_pch_transcoder(struct drm_i915_private *dev_priv,
1868 struct drm_device *dev = dev_priv->dev;
1869 struct drm_crtc *crtc = dev_priv->pipe_to_crtc_mapping[pipe];
1870 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
1871 uint32_t reg, val, pipeconf_val;
1873 /* PCH only available on ILK+ */
1874 BUG_ON(!HAS_PCH_SPLIT(dev));
1876 /* Make sure PCH DPLL is enabled */
1877 assert_shared_dpll_enabled(dev_priv,
1878 intel_crtc_to_shared_dpll(intel_crtc));
1880 /* FDI must be feeding us bits for PCH ports */
1881 assert_fdi_tx_enabled(dev_priv, pipe);
1882 assert_fdi_rx_enabled(dev_priv, pipe);
1884 if (HAS_PCH_CPT(dev)) {
1885 /* Workaround: Set the timing override bit before enabling the
1886 * pch transcoder. */
1887 reg = TRANS_CHICKEN2(pipe);
1888 val = I915_READ(reg);
1889 val |= TRANS_CHICKEN2_TIMING_OVERRIDE;
1890 I915_WRITE(reg, val);
1893 reg = PCH_TRANSCONF(pipe);
1894 val = I915_READ(reg);
1895 pipeconf_val = I915_READ(PIPECONF(pipe));
1897 if (HAS_PCH_IBX(dev_priv->dev)) {
1899 * make the BPC in transcoder be consistent with
1900 * that in pipeconf reg.
1902 val &= ~PIPECONF_BPC_MASK;
1903 val |= pipeconf_val & PIPECONF_BPC_MASK;
1906 val &= ~TRANS_INTERLACE_MASK;
1907 if ((pipeconf_val & PIPECONF_INTERLACE_MASK) == PIPECONF_INTERLACED_ILK)
1908 if (HAS_PCH_IBX(dev_priv->dev) &&
1909 intel_pipe_has_type(intel_crtc, INTEL_OUTPUT_SDVO))
1910 val |= TRANS_LEGACY_INTERLACED_ILK;
1912 val |= TRANS_INTERLACED;
1914 val |= TRANS_PROGRESSIVE;
1916 I915_WRITE(reg, val | TRANS_ENABLE);
1917 if (wait_for(I915_READ(reg) & TRANS_STATE_ENABLE, 100))
1918 DRM_ERROR("failed to enable transcoder %c\n", pipe_name(pipe));
1921 static void lpt_enable_pch_transcoder(struct drm_i915_private *dev_priv,
1922 enum transcoder cpu_transcoder)
1924 u32 val, pipeconf_val;
1926 /* PCH only available on ILK+ */
1927 BUG_ON(!HAS_PCH_SPLIT(dev_priv->dev));
1929 /* FDI must be feeding us bits for PCH ports */
1930 assert_fdi_tx_enabled(dev_priv, (enum pipe) cpu_transcoder);
1931 assert_fdi_rx_enabled(dev_priv, TRANSCODER_A);
1933 /* Workaround: set timing override bit. */
1934 val = I915_READ(_TRANSA_CHICKEN2);
1935 val |= TRANS_CHICKEN2_TIMING_OVERRIDE;
1936 I915_WRITE(_TRANSA_CHICKEN2, val);
1939 pipeconf_val = I915_READ(PIPECONF(cpu_transcoder));
1941 if ((pipeconf_val & PIPECONF_INTERLACE_MASK_HSW) ==
1942 PIPECONF_INTERLACED_ILK)
1943 val |= TRANS_INTERLACED;
1945 val |= TRANS_PROGRESSIVE;
1947 I915_WRITE(LPT_TRANSCONF, val);
1948 if (wait_for(I915_READ(LPT_TRANSCONF) & TRANS_STATE_ENABLE, 100))
1949 DRM_ERROR("Failed to enable PCH transcoder\n");
1952 static void ironlake_disable_pch_transcoder(struct drm_i915_private *dev_priv,
1955 struct drm_device *dev = dev_priv->dev;
1958 /* FDI relies on the transcoder */
1959 assert_fdi_tx_disabled(dev_priv, pipe);
1960 assert_fdi_rx_disabled(dev_priv, pipe);
1962 /* Ports must be off as well */
1963 assert_pch_ports_disabled(dev_priv, pipe);
1965 reg = PCH_TRANSCONF(pipe);
1966 val = I915_READ(reg);
1967 val &= ~TRANS_ENABLE;
1968 I915_WRITE(reg, val);
1969 /* wait for PCH transcoder off, transcoder state */
1970 if (wait_for((I915_READ(reg) & TRANS_STATE_ENABLE) == 0, 50))
1971 DRM_ERROR("failed to disable transcoder %c\n", pipe_name(pipe));
1973 if (!HAS_PCH_IBX(dev)) {
1974 /* Workaround: Clear the timing override chicken bit again. */
1975 reg = TRANS_CHICKEN2(pipe);
1976 val = I915_READ(reg);
1977 val &= ~TRANS_CHICKEN2_TIMING_OVERRIDE;
1978 I915_WRITE(reg, val);
1982 static void lpt_disable_pch_transcoder(struct drm_i915_private *dev_priv)
1986 val = I915_READ(LPT_TRANSCONF);
1987 val &= ~TRANS_ENABLE;
1988 I915_WRITE(LPT_TRANSCONF, val);
1989 /* wait for PCH transcoder off, transcoder state */
1990 if (wait_for((I915_READ(LPT_TRANSCONF) & TRANS_STATE_ENABLE) == 0, 50))
1991 DRM_ERROR("Failed to disable PCH transcoder\n");
1993 /* Workaround: clear timing override bit. */
1994 val = I915_READ(_TRANSA_CHICKEN2);
1995 val &= ~TRANS_CHICKEN2_TIMING_OVERRIDE;
1996 I915_WRITE(_TRANSA_CHICKEN2, val);
2000 * intel_enable_pipe - enable a pipe, asserting requirements
2001 * @crtc: crtc responsible for the pipe
2003 * Enable @crtc's pipe, making sure that various hardware specific requirements
2004 * are met, if applicable, e.g. PLL enabled, LVDS pairs enabled, etc.
2006 static void intel_enable_pipe(struct intel_crtc *crtc)
2008 struct drm_device *dev = crtc->base.dev;
2009 struct drm_i915_private *dev_priv = dev->dev_private;
2010 enum pipe pipe = crtc->pipe;
2011 enum transcoder cpu_transcoder = intel_pipe_to_cpu_transcoder(dev_priv,
2013 enum pipe pch_transcoder;
2017 assert_planes_disabled(dev_priv, pipe);
2018 assert_cursor_disabled(dev_priv, pipe);
2019 assert_sprites_disabled(dev_priv, pipe);
2021 if (HAS_PCH_LPT(dev_priv->dev))
2022 pch_transcoder = TRANSCODER_A;
2024 pch_transcoder = pipe;
2027 * A pipe without a PLL won't actually be able to drive bits from
2028 * a plane. On ILK+ the pipe PLLs are integrated, so we don't
2031 if (!HAS_PCH_SPLIT(dev_priv->dev))
2032 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DSI))
2033 assert_dsi_pll_enabled(dev_priv);
2035 assert_pll_enabled(dev_priv, pipe);
2037 if (crtc->config.has_pch_encoder) {
2038 /* if driving the PCH, we need FDI enabled */
2039 assert_fdi_rx_pll_enabled(dev_priv, pch_transcoder);
2040 assert_fdi_tx_pll_enabled(dev_priv,
2041 (enum pipe) cpu_transcoder);
2043 /* FIXME: assert CPU port conditions for SNB+ */
2046 reg = PIPECONF(cpu_transcoder);
2047 val = I915_READ(reg);
2048 if (val & PIPECONF_ENABLE) {
2049 WARN_ON(!((pipe == PIPE_A && dev_priv->quirks & QUIRK_PIPEA_FORCE) ||
2050 (pipe == PIPE_B && dev_priv->quirks & QUIRK_PIPEB_FORCE)));
2054 I915_WRITE(reg, val | PIPECONF_ENABLE);
2059 * intel_disable_pipe - disable a pipe, asserting requirements
2060 * @crtc: crtc whose pipes is to be disabled
2062 * Disable the pipe of @crtc, making sure that various hardware
2063 * specific requirements are met, if applicable, e.g. plane
2064 * disabled, panel fitter off, etc.
2066 * Will wait until the pipe has shut down before returning.
2068 static void intel_disable_pipe(struct intel_crtc *crtc)
2070 struct drm_i915_private *dev_priv = crtc->base.dev->dev_private;
2071 enum transcoder cpu_transcoder = crtc->config.cpu_transcoder;
2072 enum pipe pipe = crtc->pipe;
2077 * Make sure planes won't keep trying to pump pixels to us,
2078 * or we might hang the display.
2080 assert_planes_disabled(dev_priv, pipe);
2081 assert_cursor_disabled(dev_priv, pipe);
2082 assert_sprites_disabled(dev_priv, pipe);
2084 reg = PIPECONF(cpu_transcoder);
2085 val = I915_READ(reg);
2086 if ((val & PIPECONF_ENABLE) == 0)
2090 * Double wide has implications for planes
2091 * so best keep it disabled when not needed.
2093 if (crtc->config.double_wide)
2094 val &= ~PIPECONF_DOUBLE_WIDE;
2096 /* Don't disable pipe or pipe PLLs if needed */
2097 if (!(pipe == PIPE_A && dev_priv->quirks & QUIRK_PIPEA_FORCE) &&
2098 !(pipe == PIPE_B && dev_priv->quirks & QUIRK_PIPEB_FORCE))
2099 val &= ~PIPECONF_ENABLE;
2101 I915_WRITE(reg, val);
2102 if ((val & PIPECONF_ENABLE) == 0)
2103 intel_wait_for_pipe_off(crtc);
2107 * Plane regs are double buffered, going from enabled->disabled needs a
2108 * trigger in order to latch. The display address reg provides this.
2110 void intel_flush_primary_plane(struct drm_i915_private *dev_priv,
2113 struct drm_device *dev = dev_priv->dev;
2114 u32 reg = INTEL_INFO(dev)->gen >= 4 ? DSPSURF(plane) : DSPADDR(plane);
2116 I915_WRITE(reg, I915_READ(reg));
2121 * intel_enable_primary_hw_plane - enable the primary plane on a given pipe
2122 * @plane: plane to be enabled
2123 * @crtc: crtc for the plane
2125 * Enable @plane on @crtc, making sure that the pipe is running first.
2127 static void intel_enable_primary_hw_plane(struct drm_plane *plane,
2128 struct drm_crtc *crtc)
2130 struct drm_device *dev = plane->dev;
2131 struct drm_i915_private *dev_priv = dev->dev_private;
2132 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
2134 /* If the pipe isn't enabled, we can't pump pixels and may hang */
2135 assert_pipe_enabled(dev_priv, intel_crtc->pipe);
2137 if (intel_crtc->primary_enabled)
2140 intel_crtc->primary_enabled = true;
2142 dev_priv->display.update_primary_plane(crtc, plane->fb,
2146 * BDW signals flip done immediately if the plane
2147 * is disabled, even if the plane enable is already
2148 * armed to occur at the next vblank :(
2150 if (IS_BROADWELL(dev))
2151 intel_wait_for_vblank(dev, intel_crtc->pipe);
2155 * intel_disable_primary_hw_plane - disable the primary hardware plane
2156 * @plane: plane to be disabled
2157 * @crtc: crtc for the plane
2159 * Disable @plane on @crtc, making sure that the pipe is running first.
2161 static void intel_disable_primary_hw_plane(struct drm_plane *plane,
2162 struct drm_crtc *crtc)
2164 struct drm_device *dev = plane->dev;
2165 struct drm_i915_private *dev_priv = dev->dev_private;
2166 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
2168 assert_pipe_enabled(dev_priv, intel_crtc->pipe);
2170 if (!intel_crtc->primary_enabled)
2173 intel_crtc->primary_enabled = false;
2175 dev_priv->display.update_primary_plane(crtc, plane->fb,
2179 static bool need_vtd_wa(struct drm_device *dev)
2181 #ifdef CONFIG_INTEL_IOMMU
2182 if (INTEL_INFO(dev)->gen >= 6 && intel_iommu_gfx_mapped)
2188 static int intel_align_height(struct drm_device *dev, int height, bool tiled)
2192 tile_height = tiled ? (IS_GEN2(dev) ? 16 : 8) : 1;
2193 return ALIGN(height, tile_height);
2197 intel_pin_and_fence_fb_obj(struct drm_plane *plane,
2198 struct drm_framebuffer *fb,
2199 struct intel_engine_cs *pipelined)
2201 struct drm_device *dev = fb->dev;
2202 struct drm_i915_private *dev_priv = dev->dev_private;
2203 struct drm_i915_gem_object *obj = intel_fb_obj(fb);
2207 WARN_ON(!mutex_is_locked(&dev->struct_mutex));
2209 switch (obj->tiling_mode) {
2210 case I915_TILING_NONE:
2211 if (INTEL_INFO(dev)->gen >= 9)
2212 alignment = 256 * 1024;
2213 else if (IS_BROADWATER(dev) || IS_CRESTLINE(dev))
2214 alignment = 128 * 1024;
2215 else if (INTEL_INFO(dev)->gen >= 4)
2216 alignment = 4 * 1024;
2218 alignment = 64 * 1024;
2221 if (INTEL_INFO(dev)->gen >= 9)
2222 alignment = 256 * 1024;
2224 /* pin() will align the object as required by fence */
2229 WARN(1, "Y tiled bo slipped through, driver bug!\n");
2235 /* Note that the w/a also requires 64 PTE of padding following the
2236 * bo. We currently fill all unused PTE with the shadow page and so
2237 * we should always have valid PTE following the scanout preventing
2240 if (need_vtd_wa(dev) && alignment < 256 * 1024)
2241 alignment = 256 * 1024;
2244 * Global gtt pte registers are special registers which actually forward
2245 * writes to a chunk of system memory. Which means that there is no risk
2246 * that the register values disappear as soon as we call
2247 * intel_runtime_pm_put(), so it is correct to wrap only the
2248 * pin/unpin/fence and not more.
2250 intel_runtime_pm_get(dev_priv);
2252 dev_priv->mm.interruptible = false;
2253 ret = i915_gem_object_pin_to_display_plane(obj, alignment, pipelined);
2255 goto err_interruptible;
2257 /* Install a fence for tiled scan-out. Pre-i965 always needs a
2258 * fence, whereas 965+ only requires a fence if using
2259 * framebuffer compression. For simplicity, we always install
2260 * a fence as the cost is not that onerous.
2262 ret = i915_gem_object_get_fence(obj);
2266 i915_gem_object_pin_fence(obj);
2268 dev_priv->mm.interruptible = true;
2269 intel_runtime_pm_put(dev_priv);
2273 i915_gem_object_unpin_from_display_plane(obj);
2275 dev_priv->mm.interruptible = true;
2276 intel_runtime_pm_put(dev_priv);
2280 void intel_unpin_fb_obj(struct drm_i915_gem_object *obj)
2282 WARN_ON(!mutex_is_locked(&obj->base.dev->struct_mutex));
2284 i915_gem_object_unpin_fence(obj);
2285 i915_gem_object_unpin_from_display_plane(obj);
2288 /* Computes the linear offset to the base tile and adjusts x, y. bytes per pixel
2289 * is assumed to be a power-of-two. */
2290 unsigned long intel_gen4_compute_page_offset(int *x, int *y,
2291 unsigned int tiling_mode,
2295 if (tiling_mode != I915_TILING_NONE) {
2296 unsigned int tile_rows, tiles;
2301 tiles = *x / (512/cpp);
2304 return tile_rows * pitch * 8 + tiles * 4096;
2306 unsigned int offset;
2308 offset = *y * pitch + *x * cpp;
2310 *x = (offset & 4095) / cpp;
2311 return offset & -4096;
2315 int intel_format_to_fourcc(int format)
2318 case DISPPLANE_8BPP:
2319 return DRM_FORMAT_C8;
2320 case DISPPLANE_BGRX555:
2321 return DRM_FORMAT_XRGB1555;
2322 case DISPPLANE_BGRX565:
2323 return DRM_FORMAT_RGB565;
2325 case DISPPLANE_BGRX888:
2326 return DRM_FORMAT_XRGB8888;
2327 case DISPPLANE_RGBX888:
2328 return DRM_FORMAT_XBGR8888;
2329 case DISPPLANE_BGRX101010:
2330 return DRM_FORMAT_XRGB2101010;
2331 case DISPPLANE_RGBX101010:
2332 return DRM_FORMAT_XBGR2101010;
2336 static bool intel_alloc_plane_obj(struct intel_crtc *crtc,
2337 struct intel_plane_config *plane_config)
2339 struct drm_device *dev = crtc->base.dev;
2340 struct drm_i915_gem_object *obj = NULL;
2341 struct drm_mode_fb_cmd2 mode_cmd = { 0 };
2342 u32 base = plane_config->base;
2344 if (plane_config->size == 0)
2347 obj = i915_gem_object_create_stolen_for_preallocated(dev, base, base,
2348 plane_config->size);
2352 if (plane_config->tiled) {
2353 obj->tiling_mode = I915_TILING_X;
2354 obj->stride = crtc->base.primary->fb->pitches[0];
2357 mode_cmd.pixel_format = crtc->base.primary->fb->pixel_format;
2358 mode_cmd.width = crtc->base.primary->fb->width;
2359 mode_cmd.height = crtc->base.primary->fb->height;
2360 mode_cmd.pitches[0] = crtc->base.primary->fb->pitches[0];
2362 mutex_lock(&dev->struct_mutex);
2364 if (intel_framebuffer_init(dev, to_intel_framebuffer(crtc->base.primary->fb),
2366 DRM_DEBUG_KMS("intel fb init failed\n");
2370 obj->frontbuffer_bits = INTEL_FRONTBUFFER_PRIMARY(crtc->pipe);
2371 mutex_unlock(&dev->struct_mutex);
2373 DRM_DEBUG_KMS("plane fb obj %p\n", obj);
2377 drm_gem_object_unreference(&obj->base);
2378 mutex_unlock(&dev->struct_mutex);
2382 static void intel_find_plane_obj(struct intel_crtc *intel_crtc,
2383 struct intel_plane_config *plane_config)
2385 struct drm_device *dev = intel_crtc->base.dev;
2386 struct drm_i915_private *dev_priv = dev->dev_private;
2388 struct intel_crtc *i;
2389 struct drm_i915_gem_object *obj;
2391 if (!intel_crtc->base.primary->fb)
2394 if (intel_alloc_plane_obj(intel_crtc, plane_config))
2397 kfree(intel_crtc->base.primary->fb);
2398 intel_crtc->base.primary->fb = NULL;
2401 * Failed to alloc the obj, check to see if we should share
2402 * an fb with another CRTC instead
2404 for_each_crtc(dev, c) {
2405 i = to_intel_crtc(c);
2407 if (c == &intel_crtc->base)
2413 obj = intel_fb_obj(c->primary->fb);
2417 if (i915_gem_obj_ggtt_offset(obj) == plane_config->base) {
2418 if (obj->tiling_mode != I915_TILING_NONE)
2419 dev_priv->preserve_bios_swizzle = true;
2421 drm_framebuffer_reference(c->primary->fb);
2422 intel_crtc->base.primary->fb = c->primary->fb;
2423 obj->frontbuffer_bits |= INTEL_FRONTBUFFER_PRIMARY(intel_crtc->pipe);
2429 static void i9xx_update_primary_plane(struct drm_crtc *crtc,
2430 struct drm_framebuffer *fb,
2433 struct drm_device *dev = crtc->dev;
2434 struct drm_i915_private *dev_priv = dev->dev_private;
2435 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
2436 struct drm_i915_gem_object *obj;
2437 int plane = intel_crtc->plane;
2438 unsigned long linear_offset;
2440 u32 reg = DSPCNTR(plane);
2443 if (!intel_crtc->primary_enabled) {
2445 if (INTEL_INFO(dev)->gen >= 4)
2446 I915_WRITE(DSPSURF(plane), 0);
2448 I915_WRITE(DSPADDR(plane), 0);
2453 obj = intel_fb_obj(fb);
2454 if (WARN_ON(obj == NULL))
2457 pixel_size = drm_format_plane_cpp(fb->pixel_format, 0);
2459 dspcntr = DISPPLANE_GAMMA_ENABLE;
2461 dspcntr |= DISPLAY_PLANE_ENABLE;
2463 if (INTEL_INFO(dev)->gen < 4) {
2464 if (intel_crtc->pipe == PIPE_B)
2465 dspcntr |= DISPPLANE_SEL_PIPE_B;
2467 /* pipesrc and dspsize control the size that is scaled from,
2468 * which should always be the user's requested size.
2470 I915_WRITE(DSPSIZE(plane),
2471 ((intel_crtc->config.pipe_src_h - 1) << 16) |
2472 (intel_crtc->config.pipe_src_w - 1));
2473 I915_WRITE(DSPPOS(plane), 0);
2474 } else if (IS_CHERRYVIEW(dev) && plane == PLANE_B) {
2475 I915_WRITE(PRIMSIZE(plane),
2476 ((intel_crtc->config.pipe_src_h - 1) << 16) |
2477 (intel_crtc->config.pipe_src_w - 1));
2478 I915_WRITE(PRIMPOS(plane), 0);
2479 I915_WRITE(PRIMCNSTALPHA(plane), 0);
2482 switch (fb->pixel_format) {
2484 dspcntr |= DISPPLANE_8BPP;
2486 case DRM_FORMAT_XRGB1555:
2487 case DRM_FORMAT_ARGB1555:
2488 dspcntr |= DISPPLANE_BGRX555;
2490 case DRM_FORMAT_RGB565:
2491 dspcntr |= DISPPLANE_BGRX565;
2493 case DRM_FORMAT_XRGB8888:
2494 case DRM_FORMAT_ARGB8888:
2495 dspcntr |= DISPPLANE_BGRX888;
2497 case DRM_FORMAT_XBGR8888:
2498 case DRM_FORMAT_ABGR8888:
2499 dspcntr |= DISPPLANE_RGBX888;
2501 case DRM_FORMAT_XRGB2101010:
2502 case DRM_FORMAT_ARGB2101010:
2503 dspcntr |= DISPPLANE_BGRX101010;
2505 case DRM_FORMAT_XBGR2101010:
2506 case DRM_FORMAT_ABGR2101010:
2507 dspcntr |= DISPPLANE_RGBX101010;
2513 if (INTEL_INFO(dev)->gen >= 4 &&
2514 obj->tiling_mode != I915_TILING_NONE)
2515 dspcntr |= DISPPLANE_TILED;
2518 dspcntr |= DISPPLANE_TRICKLE_FEED_DISABLE;
2520 linear_offset = y * fb->pitches[0] + x * pixel_size;
2522 if (INTEL_INFO(dev)->gen >= 4) {
2523 intel_crtc->dspaddr_offset =
2524 intel_gen4_compute_page_offset(&x, &y, obj->tiling_mode,
2527 linear_offset -= intel_crtc->dspaddr_offset;
2529 intel_crtc->dspaddr_offset = linear_offset;
2532 if (to_intel_plane(crtc->primary)->rotation == BIT(DRM_ROTATE_180)) {
2533 dspcntr |= DISPPLANE_ROTATE_180;
2535 x += (intel_crtc->config.pipe_src_w - 1);
2536 y += (intel_crtc->config.pipe_src_h - 1);
2538 /* Finding the last pixel of the last line of the display
2539 data and adding to linear_offset*/
2541 (intel_crtc->config.pipe_src_h - 1) * fb->pitches[0] +
2542 (intel_crtc->config.pipe_src_w - 1) * pixel_size;
2545 I915_WRITE(reg, dspcntr);
2547 DRM_DEBUG_KMS("Writing base %08lX %08lX %d %d %d\n",
2548 i915_gem_obj_ggtt_offset(obj), linear_offset, x, y,
2550 I915_WRITE(DSPSTRIDE(plane), fb->pitches[0]);
2551 if (INTEL_INFO(dev)->gen >= 4) {
2552 I915_WRITE(DSPSURF(plane),
2553 i915_gem_obj_ggtt_offset(obj) + intel_crtc->dspaddr_offset);
2554 I915_WRITE(DSPTILEOFF(plane), (y << 16) | x);
2555 I915_WRITE(DSPLINOFF(plane), linear_offset);
2557 I915_WRITE(DSPADDR(plane), i915_gem_obj_ggtt_offset(obj) + linear_offset);
2561 static void ironlake_update_primary_plane(struct drm_crtc *crtc,
2562 struct drm_framebuffer *fb,
2565 struct drm_device *dev = crtc->dev;
2566 struct drm_i915_private *dev_priv = dev->dev_private;
2567 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
2568 struct drm_i915_gem_object *obj;
2569 int plane = intel_crtc->plane;
2570 unsigned long linear_offset;
2572 u32 reg = DSPCNTR(plane);
2575 if (!intel_crtc->primary_enabled) {
2577 I915_WRITE(DSPSURF(plane), 0);
2582 obj = intel_fb_obj(fb);
2583 if (WARN_ON(obj == NULL))
2586 pixel_size = drm_format_plane_cpp(fb->pixel_format, 0);
2588 dspcntr = DISPPLANE_GAMMA_ENABLE;
2590 dspcntr |= DISPLAY_PLANE_ENABLE;
2592 if (IS_HASWELL(dev) || IS_BROADWELL(dev))
2593 dspcntr |= DISPPLANE_PIPE_CSC_ENABLE;
2595 switch (fb->pixel_format) {
2597 dspcntr |= DISPPLANE_8BPP;
2599 case DRM_FORMAT_RGB565:
2600 dspcntr |= DISPPLANE_BGRX565;
2602 case DRM_FORMAT_XRGB8888:
2603 case DRM_FORMAT_ARGB8888:
2604 dspcntr |= DISPPLANE_BGRX888;
2606 case DRM_FORMAT_XBGR8888:
2607 case DRM_FORMAT_ABGR8888:
2608 dspcntr |= DISPPLANE_RGBX888;
2610 case DRM_FORMAT_XRGB2101010:
2611 case DRM_FORMAT_ARGB2101010:
2612 dspcntr |= DISPPLANE_BGRX101010;
2614 case DRM_FORMAT_XBGR2101010:
2615 case DRM_FORMAT_ABGR2101010:
2616 dspcntr |= DISPPLANE_RGBX101010;
2622 if (obj->tiling_mode != I915_TILING_NONE)
2623 dspcntr |= DISPPLANE_TILED;
2625 if (!IS_HASWELL(dev) && !IS_BROADWELL(dev))
2626 dspcntr |= DISPPLANE_TRICKLE_FEED_DISABLE;
2628 linear_offset = y * fb->pitches[0] + x * pixel_size;
2629 intel_crtc->dspaddr_offset =
2630 intel_gen4_compute_page_offset(&x, &y, obj->tiling_mode,
2633 linear_offset -= intel_crtc->dspaddr_offset;
2634 if (to_intel_plane(crtc->primary)->rotation == BIT(DRM_ROTATE_180)) {
2635 dspcntr |= DISPPLANE_ROTATE_180;
2637 if (!IS_HASWELL(dev) && !IS_BROADWELL(dev)) {
2638 x += (intel_crtc->config.pipe_src_w - 1);
2639 y += (intel_crtc->config.pipe_src_h - 1);
2641 /* Finding the last pixel of the last line of the display
2642 data and adding to linear_offset*/
2644 (intel_crtc->config.pipe_src_h - 1) * fb->pitches[0] +
2645 (intel_crtc->config.pipe_src_w - 1) * pixel_size;
2649 I915_WRITE(reg, dspcntr);
2651 DRM_DEBUG_KMS("Writing base %08lX %08lX %d %d %d\n",
2652 i915_gem_obj_ggtt_offset(obj), linear_offset, x, y,
2654 I915_WRITE(DSPSTRIDE(plane), fb->pitches[0]);
2655 I915_WRITE(DSPSURF(plane),
2656 i915_gem_obj_ggtt_offset(obj) + intel_crtc->dspaddr_offset);
2657 if (IS_HASWELL(dev) || IS_BROADWELL(dev)) {
2658 I915_WRITE(DSPOFFSET(plane), (y << 16) | x);
2660 I915_WRITE(DSPTILEOFF(plane), (y << 16) | x);
2661 I915_WRITE(DSPLINOFF(plane), linear_offset);
2666 static void skylake_update_primary_plane(struct drm_crtc *crtc,
2667 struct drm_framebuffer *fb,
2670 struct drm_device *dev = crtc->dev;
2671 struct drm_i915_private *dev_priv = dev->dev_private;
2672 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
2673 struct intel_framebuffer *intel_fb;
2674 struct drm_i915_gem_object *obj;
2675 int pipe = intel_crtc->pipe;
2676 u32 plane_ctl, stride;
2678 if (!intel_crtc->primary_enabled) {
2679 I915_WRITE(PLANE_CTL(pipe, 0), 0);
2680 I915_WRITE(PLANE_SURF(pipe, 0), 0);
2681 POSTING_READ(PLANE_CTL(pipe, 0));
2685 plane_ctl = PLANE_CTL_ENABLE |
2686 PLANE_CTL_PIPE_GAMMA_ENABLE |
2687 PLANE_CTL_PIPE_CSC_ENABLE;
2689 switch (fb->pixel_format) {
2690 case DRM_FORMAT_RGB565:
2691 plane_ctl |= PLANE_CTL_FORMAT_RGB_565;
2693 case DRM_FORMAT_XRGB8888:
2694 plane_ctl |= PLANE_CTL_FORMAT_XRGB_8888;
2696 case DRM_FORMAT_XBGR8888:
2697 plane_ctl |= PLANE_CTL_ORDER_RGBX;
2698 plane_ctl |= PLANE_CTL_FORMAT_XRGB_8888;
2700 case DRM_FORMAT_XRGB2101010:
2701 plane_ctl |= PLANE_CTL_FORMAT_XRGB_2101010;
2703 case DRM_FORMAT_XBGR2101010:
2704 plane_ctl |= PLANE_CTL_ORDER_RGBX;
2705 plane_ctl |= PLANE_CTL_FORMAT_XRGB_2101010;
2711 intel_fb = to_intel_framebuffer(fb);
2712 obj = intel_fb->obj;
2715 * The stride is either expressed as a multiple of 64 bytes chunks for
2716 * linear buffers or in number of tiles for tiled buffers.
2718 switch (obj->tiling_mode) {
2719 case I915_TILING_NONE:
2720 stride = fb->pitches[0] >> 6;
2723 plane_ctl |= PLANE_CTL_TILED_X;
2724 stride = fb->pitches[0] >> 9;
2730 plane_ctl |= PLANE_CTL_PLANE_GAMMA_DISABLE;
2731 if (to_intel_plane(crtc->primary)->rotation == BIT(DRM_ROTATE_180))
2732 plane_ctl |= PLANE_CTL_ROTATE_180;
2734 I915_WRITE(PLANE_CTL(pipe, 0), plane_ctl);
2736 DRM_DEBUG_KMS("Writing base %08lX %d,%d,%d,%d pitch=%d\n",
2737 i915_gem_obj_ggtt_offset(obj),
2738 x, y, fb->width, fb->height,
2741 I915_WRITE(PLANE_POS(pipe, 0), 0);
2742 I915_WRITE(PLANE_OFFSET(pipe, 0), (y << 16) | x);
2743 I915_WRITE(PLANE_SIZE(pipe, 0),
2744 (intel_crtc->config.pipe_src_h - 1) << 16 |
2745 (intel_crtc->config.pipe_src_w - 1));
2746 I915_WRITE(PLANE_STRIDE(pipe, 0), stride);
2747 I915_WRITE(PLANE_SURF(pipe, 0), i915_gem_obj_ggtt_offset(obj));
2749 POSTING_READ(PLANE_SURF(pipe, 0));
2752 /* Assume fb object is pinned & idle & fenced and just update base pointers */
2754 intel_pipe_set_base_atomic(struct drm_crtc *crtc, struct drm_framebuffer *fb,
2755 int x, int y, enum mode_set_atomic state)
2757 struct drm_device *dev = crtc->dev;
2758 struct drm_i915_private *dev_priv = dev->dev_private;
2760 if (dev_priv->display.disable_fbc)
2761 dev_priv->display.disable_fbc(dev);
2763 dev_priv->display.update_primary_plane(crtc, fb, x, y);
2768 void intel_display_handle_reset(struct drm_device *dev)
2770 struct drm_i915_private *dev_priv = dev->dev_private;
2771 struct drm_crtc *crtc;
2774 * Flips in the rings have been nuked by the reset,
2775 * so complete all pending flips so that user space
2776 * will get its events and not get stuck.
2778 * Also update the base address of all primary
2779 * planes to the the last fb to make sure we're
2780 * showing the correct fb after a reset.
2782 * Need to make two loops over the crtcs so that we
2783 * don't try to grab a crtc mutex before the
2784 * pending_flip_queue really got woken up.
2787 for_each_crtc(dev, crtc) {
2788 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
2789 enum plane plane = intel_crtc->plane;
2791 intel_prepare_page_flip(dev, plane);
2792 intel_finish_page_flip_plane(dev, plane);
2795 for_each_crtc(dev, crtc) {
2796 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
2798 drm_modeset_lock(&crtc->mutex, NULL);
2800 * FIXME: Once we have proper support for primary planes (and
2801 * disabling them without disabling the entire crtc) allow again
2802 * a NULL crtc->primary->fb.
2804 if (intel_crtc->active && crtc->primary->fb)
2805 dev_priv->display.update_primary_plane(crtc,
2809 drm_modeset_unlock(&crtc->mutex);
2814 intel_finish_fb(struct drm_framebuffer *old_fb)
2816 struct drm_i915_gem_object *obj = intel_fb_obj(old_fb);
2817 struct drm_i915_private *dev_priv = obj->base.dev->dev_private;
2818 bool was_interruptible = dev_priv->mm.interruptible;
2821 /* Big Hammer, we also need to ensure that any pending
2822 * MI_WAIT_FOR_EVENT inside a user batch buffer on the
2823 * current scanout is retired before unpinning the old
2826 * This should only fail upon a hung GPU, in which case we
2827 * can safely continue.
2829 dev_priv->mm.interruptible = false;
2830 ret = i915_gem_object_finish_gpu(obj);
2831 dev_priv->mm.interruptible = was_interruptible;
2836 static bool intel_crtc_has_pending_flip(struct drm_crtc *crtc)
2838 struct drm_device *dev = crtc->dev;
2839 struct drm_i915_private *dev_priv = dev->dev_private;
2840 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
2843 if (i915_reset_in_progress(&dev_priv->gpu_error) ||
2844 intel_crtc->reset_counter != atomic_read(&dev_priv->gpu_error.reset_counter))
2847 spin_lock_irq(&dev->event_lock);
2848 pending = to_intel_crtc(crtc)->unpin_work != NULL;
2849 spin_unlock_irq(&dev->event_lock);
2854 static void intel_update_pipe_size(struct intel_crtc *crtc)
2856 struct drm_device *dev = crtc->base.dev;
2857 struct drm_i915_private *dev_priv = dev->dev_private;
2858 const struct drm_display_mode *adjusted_mode;
2864 * Update pipe size and adjust fitter if needed: the reason for this is
2865 * that in compute_mode_changes we check the native mode (not the pfit
2866 * mode) to see if we can flip rather than do a full mode set. In the
2867 * fastboot case, we'll flip, but if we don't update the pipesrc and
2868 * pfit state, we'll end up with a big fb scanned out into the wrong
2871 * To fix this properly, we need to hoist the checks up into
2872 * compute_mode_changes (or above), check the actual pfit state and
2873 * whether the platform allows pfit disable with pipe active, and only
2874 * then update the pipesrc and pfit state, even on the flip path.
2877 adjusted_mode = &crtc->config.adjusted_mode;
2879 I915_WRITE(PIPESRC(crtc->pipe),
2880 ((adjusted_mode->crtc_hdisplay - 1) << 16) |
2881 (adjusted_mode->crtc_vdisplay - 1));
2882 if (!crtc->config.pch_pfit.enabled &&
2883 (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) ||
2884 intel_pipe_has_type(crtc, INTEL_OUTPUT_EDP))) {
2885 I915_WRITE(PF_CTL(crtc->pipe), 0);
2886 I915_WRITE(PF_WIN_POS(crtc->pipe), 0);
2887 I915_WRITE(PF_WIN_SZ(crtc->pipe), 0);
2889 crtc->config.pipe_src_w = adjusted_mode->crtc_hdisplay;
2890 crtc->config.pipe_src_h = adjusted_mode->crtc_vdisplay;
2894 intel_pipe_set_base(struct drm_crtc *crtc, int x, int y,
2895 struct drm_framebuffer *fb)
2897 struct drm_device *dev = crtc->dev;
2898 struct drm_i915_private *dev_priv = dev->dev_private;
2899 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
2900 enum pipe pipe = intel_crtc->pipe;
2901 struct drm_framebuffer *old_fb = crtc->primary->fb;
2902 struct drm_i915_gem_object *old_obj = intel_fb_obj(old_fb);
2905 if (intel_crtc_has_pending_flip(crtc)) {
2906 DRM_ERROR("pipe is still busy with an old pageflip\n");
2912 DRM_ERROR("No FB bound\n");
2916 if (intel_crtc->plane > INTEL_INFO(dev)->num_pipes) {
2917 DRM_ERROR("no plane for crtc: plane %c, num_pipes %d\n",
2918 plane_name(intel_crtc->plane),
2919 INTEL_INFO(dev)->num_pipes);
2923 mutex_lock(&dev->struct_mutex);
2924 ret = intel_pin_and_fence_fb_obj(crtc->primary, fb, NULL);
2926 i915_gem_track_fb(old_obj, intel_fb_obj(fb),
2927 INTEL_FRONTBUFFER_PRIMARY(pipe));
2928 mutex_unlock(&dev->struct_mutex);
2930 DRM_ERROR("pin & fence failed\n");
2934 intel_update_pipe_size(intel_crtc);
2936 dev_priv->display.update_primary_plane(crtc, fb, x, y);
2938 if (intel_crtc->active)
2939 intel_frontbuffer_flip(dev, INTEL_FRONTBUFFER_PRIMARY(pipe));
2941 crtc->primary->fb = fb;
2946 if (intel_crtc->active && old_fb != fb)
2947 intel_wait_for_vblank(dev, intel_crtc->pipe);
2948 mutex_lock(&dev->struct_mutex);
2949 intel_unpin_fb_obj(old_obj);
2950 mutex_unlock(&dev->struct_mutex);
2953 mutex_lock(&dev->struct_mutex);
2954 intel_update_fbc(dev);
2955 mutex_unlock(&dev->struct_mutex);
2960 static void intel_fdi_normal_train(struct drm_crtc *crtc)
2962 struct drm_device *dev = crtc->dev;
2963 struct drm_i915_private *dev_priv = dev->dev_private;
2964 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
2965 int pipe = intel_crtc->pipe;
2968 /* enable normal train */
2969 reg = FDI_TX_CTL(pipe);
2970 temp = I915_READ(reg);
2971 if (IS_IVYBRIDGE(dev)) {
2972 temp &= ~FDI_LINK_TRAIN_NONE_IVB;
2973 temp |= FDI_LINK_TRAIN_NONE_IVB | FDI_TX_ENHANCE_FRAME_ENABLE;
2975 temp &= ~FDI_LINK_TRAIN_NONE;
2976 temp |= FDI_LINK_TRAIN_NONE | FDI_TX_ENHANCE_FRAME_ENABLE;
2978 I915_WRITE(reg, temp);
2980 reg = FDI_RX_CTL(pipe);
2981 temp = I915_READ(reg);
2982 if (HAS_PCH_CPT(dev)) {
2983 temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
2984 temp |= FDI_LINK_TRAIN_NORMAL_CPT;
2986 temp &= ~FDI_LINK_TRAIN_NONE;
2987 temp |= FDI_LINK_TRAIN_NONE;
2989 I915_WRITE(reg, temp | FDI_RX_ENHANCE_FRAME_ENABLE);
2991 /* wait one idle pattern time */
2995 /* IVB wants error correction enabled */
2996 if (IS_IVYBRIDGE(dev))
2997 I915_WRITE(reg, I915_READ(reg) | FDI_FS_ERRC_ENABLE |
2998 FDI_FE_ERRC_ENABLE);
3001 static bool pipe_has_enabled_pch(struct intel_crtc *crtc)
3003 return crtc->base.enabled && crtc->active &&
3004 crtc->config.has_pch_encoder;
3007 static void ivb_modeset_global_resources(struct drm_device *dev)
3009 struct drm_i915_private *dev_priv = dev->dev_private;
3010 struct intel_crtc *pipe_B_crtc =
3011 to_intel_crtc(dev_priv->pipe_to_crtc_mapping[PIPE_B]);
3012 struct intel_crtc *pipe_C_crtc =
3013 to_intel_crtc(dev_priv->pipe_to_crtc_mapping[PIPE_C]);
3017 * When everything is off disable fdi C so that we could enable fdi B
3018 * with all lanes. Note that we don't care about enabled pipes without
3019 * an enabled pch encoder.
3021 if (!pipe_has_enabled_pch(pipe_B_crtc) &&
3022 !pipe_has_enabled_pch(pipe_C_crtc)) {
3023 WARN_ON(I915_READ(FDI_RX_CTL(PIPE_B)) & FDI_RX_ENABLE);
3024 WARN_ON(I915_READ(FDI_RX_CTL(PIPE_C)) & FDI_RX_ENABLE);
3026 temp = I915_READ(SOUTH_CHICKEN1);
3027 temp &= ~FDI_BC_BIFURCATION_SELECT;
3028 DRM_DEBUG_KMS("disabling fdi C rx\n");
3029 I915_WRITE(SOUTH_CHICKEN1, temp);
3033 /* The FDI link training functions for ILK/Ibexpeak. */
3034 static void ironlake_fdi_link_train(struct drm_crtc *crtc)
3036 struct drm_device *dev = crtc->dev;
3037 struct drm_i915_private *dev_priv = dev->dev_private;
3038 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3039 int pipe = intel_crtc->pipe;
3040 u32 reg, temp, tries;
3042 /* FDI needs bits from pipe first */
3043 assert_pipe_enabled(dev_priv, pipe);
3045 /* Train 1: umask FDI RX Interrupt symbol_lock and bit_lock bit
3047 reg = FDI_RX_IMR(pipe);
3048 temp = I915_READ(reg);
3049 temp &= ~FDI_RX_SYMBOL_LOCK;
3050 temp &= ~FDI_RX_BIT_LOCK;
3051 I915_WRITE(reg, temp);
3055 /* enable CPU FDI TX and PCH FDI RX */
3056 reg = FDI_TX_CTL(pipe);
3057 temp = I915_READ(reg);
3058 temp &= ~FDI_DP_PORT_WIDTH_MASK;
3059 temp |= FDI_DP_PORT_WIDTH(intel_crtc->config.fdi_lanes);
3060 temp &= ~FDI_LINK_TRAIN_NONE;
3061 temp |= FDI_LINK_TRAIN_PATTERN_1;
3062 I915_WRITE(reg, temp | FDI_TX_ENABLE);
3064 reg = FDI_RX_CTL(pipe);
3065 temp = I915_READ(reg);
3066 temp &= ~FDI_LINK_TRAIN_NONE;
3067 temp |= FDI_LINK_TRAIN_PATTERN_1;
3068 I915_WRITE(reg, temp | FDI_RX_ENABLE);
3073 /* Ironlake workaround, enable clock pointer after FDI enable*/
3074 I915_WRITE(FDI_RX_CHICKEN(pipe), FDI_RX_PHASE_SYNC_POINTER_OVR);
3075 I915_WRITE(FDI_RX_CHICKEN(pipe), FDI_RX_PHASE_SYNC_POINTER_OVR |
3076 FDI_RX_PHASE_SYNC_POINTER_EN);
3078 reg = FDI_RX_IIR(pipe);
3079 for (tries = 0; tries < 5; tries++) {
3080 temp = I915_READ(reg);
3081 DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
3083 if ((temp & FDI_RX_BIT_LOCK)) {
3084 DRM_DEBUG_KMS("FDI train 1 done.\n");
3085 I915_WRITE(reg, temp | FDI_RX_BIT_LOCK);
3090 DRM_ERROR("FDI train 1 fail!\n");
3093 reg = FDI_TX_CTL(pipe);
3094 temp = I915_READ(reg);
3095 temp &= ~FDI_LINK_TRAIN_NONE;
3096 temp |= FDI_LINK_TRAIN_PATTERN_2;
3097 I915_WRITE(reg, temp);
3099 reg = FDI_RX_CTL(pipe);
3100 temp = I915_READ(reg);
3101 temp &= ~FDI_LINK_TRAIN_NONE;
3102 temp |= FDI_LINK_TRAIN_PATTERN_2;
3103 I915_WRITE(reg, temp);
3108 reg = FDI_RX_IIR(pipe);
3109 for (tries = 0; tries < 5; tries++) {
3110 temp = I915_READ(reg);
3111 DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
3113 if (temp & FDI_RX_SYMBOL_LOCK) {
3114 I915_WRITE(reg, temp | FDI_RX_SYMBOL_LOCK);
3115 DRM_DEBUG_KMS("FDI train 2 done.\n");
3120 DRM_ERROR("FDI train 2 fail!\n");
3122 DRM_DEBUG_KMS("FDI train done\n");
3126 static const int snb_b_fdi_train_param[] = {
3127 FDI_LINK_TRAIN_400MV_0DB_SNB_B,
3128 FDI_LINK_TRAIN_400MV_6DB_SNB_B,
3129 FDI_LINK_TRAIN_600MV_3_5DB_SNB_B,
3130 FDI_LINK_TRAIN_800MV_0DB_SNB_B,
3133 /* The FDI link training functions for SNB/Cougarpoint. */
3134 static void gen6_fdi_link_train(struct drm_crtc *crtc)
3136 struct drm_device *dev = crtc->dev;
3137 struct drm_i915_private *dev_priv = dev->dev_private;
3138 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3139 int pipe = intel_crtc->pipe;
3140 u32 reg, temp, i, retry;
3142 /* Train 1: umask FDI RX Interrupt symbol_lock and bit_lock bit
3144 reg = FDI_RX_IMR(pipe);
3145 temp = I915_READ(reg);
3146 temp &= ~FDI_RX_SYMBOL_LOCK;
3147 temp &= ~FDI_RX_BIT_LOCK;
3148 I915_WRITE(reg, temp);
3153 /* enable CPU FDI TX and PCH FDI RX */
3154 reg = FDI_TX_CTL(pipe);
3155 temp = I915_READ(reg);
3156 temp &= ~FDI_DP_PORT_WIDTH_MASK;
3157 temp |= FDI_DP_PORT_WIDTH(intel_crtc->config.fdi_lanes);
3158 temp &= ~FDI_LINK_TRAIN_NONE;
3159 temp |= FDI_LINK_TRAIN_PATTERN_1;
3160 temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
3162 temp |= FDI_LINK_TRAIN_400MV_0DB_SNB_B;
3163 I915_WRITE(reg, temp | FDI_TX_ENABLE);
3165 I915_WRITE(FDI_RX_MISC(pipe),
3166 FDI_RX_TP1_TO_TP2_48 | FDI_RX_FDI_DELAY_90);
3168 reg = FDI_RX_CTL(pipe);
3169 temp = I915_READ(reg);
3170 if (HAS_PCH_CPT(dev)) {
3171 temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
3172 temp |= FDI_LINK_TRAIN_PATTERN_1_CPT;
3174 temp &= ~FDI_LINK_TRAIN_NONE;
3175 temp |= FDI_LINK_TRAIN_PATTERN_1;
3177 I915_WRITE(reg, temp | FDI_RX_ENABLE);
3182 for (i = 0; i < 4; i++) {
3183 reg = FDI_TX_CTL(pipe);
3184 temp = I915_READ(reg);
3185 temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
3186 temp |= snb_b_fdi_train_param[i];
3187 I915_WRITE(reg, temp);
3192 for (retry = 0; retry < 5; retry++) {
3193 reg = FDI_RX_IIR(pipe);
3194 temp = I915_READ(reg);
3195 DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
3196 if (temp & FDI_RX_BIT_LOCK) {
3197 I915_WRITE(reg, temp | FDI_RX_BIT_LOCK);
3198 DRM_DEBUG_KMS("FDI train 1 done.\n");
3207 DRM_ERROR("FDI train 1 fail!\n");
3210 reg = FDI_TX_CTL(pipe);
3211 temp = I915_READ(reg);
3212 temp &= ~FDI_LINK_TRAIN_NONE;
3213 temp |= FDI_LINK_TRAIN_PATTERN_2;
3215 temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
3217 temp |= FDI_LINK_TRAIN_400MV_0DB_SNB_B;
3219 I915_WRITE(reg, temp);
3221 reg = FDI_RX_CTL(pipe);
3222 temp = I915_READ(reg);
3223 if (HAS_PCH_CPT(dev)) {
3224 temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
3225 temp |= FDI_LINK_TRAIN_PATTERN_2_CPT;
3227 temp &= ~FDI_LINK_TRAIN_NONE;
3228 temp |= FDI_LINK_TRAIN_PATTERN_2;
3230 I915_WRITE(reg, temp);
3235 for (i = 0; i < 4; i++) {
3236 reg = FDI_TX_CTL(pipe);
3237 temp = I915_READ(reg);
3238 temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
3239 temp |= snb_b_fdi_train_param[i];
3240 I915_WRITE(reg, temp);
3245 for (retry = 0; retry < 5; retry++) {
3246 reg = FDI_RX_IIR(pipe);
3247 temp = I915_READ(reg);
3248 DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
3249 if (temp & FDI_RX_SYMBOL_LOCK) {
3250 I915_WRITE(reg, temp | FDI_RX_SYMBOL_LOCK);
3251 DRM_DEBUG_KMS("FDI train 2 done.\n");
3260 DRM_ERROR("FDI train 2 fail!\n");
3262 DRM_DEBUG_KMS("FDI train done.\n");
3265 /* Manual link training for Ivy Bridge A0 parts */
3266 static void ivb_manual_fdi_link_train(struct drm_crtc *crtc)
3268 struct drm_device *dev = crtc->dev;
3269 struct drm_i915_private *dev_priv = dev->dev_private;
3270 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3271 int pipe = intel_crtc->pipe;
3272 u32 reg, temp, i, j;
3274 /* Train 1: umask FDI RX Interrupt symbol_lock and bit_lock bit
3276 reg = FDI_RX_IMR(pipe);
3277 temp = I915_READ(reg);
3278 temp &= ~FDI_RX_SYMBOL_LOCK;
3279 temp &= ~FDI_RX_BIT_LOCK;
3280 I915_WRITE(reg, temp);
3285 DRM_DEBUG_KMS("FDI_RX_IIR before link train 0x%x\n",
3286 I915_READ(FDI_RX_IIR(pipe)));
3288 /* Try each vswing and preemphasis setting twice before moving on */
3289 for (j = 0; j < ARRAY_SIZE(snb_b_fdi_train_param) * 2; j++) {
3290 /* disable first in case we need to retry */
3291 reg = FDI_TX_CTL(pipe);
3292 temp = I915_READ(reg);
3293 temp &= ~(FDI_LINK_TRAIN_AUTO | FDI_LINK_TRAIN_NONE_IVB);
3294 temp &= ~FDI_TX_ENABLE;
3295 I915_WRITE(reg, temp);
3297 reg = FDI_RX_CTL(pipe);
3298 temp = I915_READ(reg);
3299 temp &= ~FDI_LINK_TRAIN_AUTO;
3300 temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
3301 temp &= ~FDI_RX_ENABLE;
3302 I915_WRITE(reg, temp);
3304 /* enable CPU FDI TX and PCH FDI RX */
3305 reg = FDI_TX_CTL(pipe);
3306 temp = I915_READ(reg);
3307 temp &= ~FDI_DP_PORT_WIDTH_MASK;
3308 temp |= FDI_DP_PORT_WIDTH(intel_crtc->config.fdi_lanes);
3309 temp |= FDI_LINK_TRAIN_PATTERN_1_IVB;
3310 temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
3311 temp |= snb_b_fdi_train_param[j/2];
3312 temp |= FDI_COMPOSITE_SYNC;
3313 I915_WRITE(reg, temp | FDI_TX_ENABLE);
3315 I915_WRITE(FDI_RX_MISC(pipe),
3316 FDI_RX_TP1_TO_TP2_48 | FDI_RX_FDI_DELAY_90);
3318 reg = FDI_RX_CTL(pipe);
3319 temp = I915_READ(reg);
3320 temp |= FDI_LINK_TRAIN_PATTERN_1_CPT;
3321 temp |= FDI_COMPOSITE_SYNC;
3322 I915_WRITE(reg, temp | FDI_RX_ENABLE);
3325 udelay(1); /* should be 0.5us */
3327 for (i = 0; i < 4; i++) {
3328 reg = FDI_RX_IIR(pipe);
3329 temp = I915_READ(reg);
3330 DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
3332 if (temp & FDI_RX_BIT_LOCK ||
3333 (I915_READ(reg) & FDI_RX_BIT_LOCK)) {
3334 I915_WRITE(reg, temp | FDI_RX_BIT_LOCK);
3335 DRM_DEBUG_KMS("FDI train 1 done, level %i.\n",
3339 udelay(1); /* should be 0.5us */
3342 DRM_DEBUG_KMS("FDI train 1 fail on vswing %d\n", j / 2);
3347 reg = FDI_TX_CTL(pipe);
3348 temp = I915_READ(reg);
3349 temp &= ~FDI_LINK_TRAIN_NONE_IVB;
3350 temp |= FDI_LINK_TRAIN_PATTERN_2_IVB;
3351 I915_WRITE(reg, temp);
3353 reg = FDI_RX_CTL(pipe);
3354 temp = I915_READ(reg);
3355 temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
3356 temp |= FDI_LINK_TRAIN_PATTERN_2_CPT;
3357 I915_WRITE(reg, temp);
3360 udelay(2); /* should be 1.5us */
3362 for (i = 0; i < 4; i++) {
3363 reg = FDI_RX_IIR(pipe);
3364 temp = I915_READ(reg);
3365 DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
3367 if (temp & FDI_RX_SYMBOL_LOCK ||
3368 (I915_READ(reg) & FDI_RX_SYMBOL_LOCK)) {
3369 I915_WRITE(reg, temp | FDI_RX_SYMBOL_LOCK);
3370 DRM_DEBUG_KMS("FDI train 2 done, level %i.\n",
3374 udelay(2); /* should be 1.5us */
3377 DRM_DEBUG_KMS("FDI train 2 fail on vswing %d\n", j / 2);
3381 DRM_DEBUG_KMS("FDI train done.\n");
3384 static void ironlake_fdi_pll_enable(struct intel_crtc *intel_crtc)
3386 struct drm_device *dev = intel_crtc->base.dev;
3387 struct drm_i915_private *dev_priv = dev->dev_private;
3388 int pipe = intel_crtc->pipe;
3392 /* enable PCH FDI RX PLL, wait warmup plus DMI latency */
3393 reg = FDI_RX_CTL(pipe);
3394 temp = I915_READ(reg);
3395 temp &= ~(FDI_DP_PORT_WIDTH_MASK | (0x7 << 16));
3396 temp |= FDI_DP_PORT_WIDTH(intel_crtc->config.fdi_lanes);
3397 temp |= (I915_READ(PIPECONF(pipe)) & PIPECONF_BPC_MASK) << 11;
3398 I915_WRITE(reg, temp | FDI_RX_PLL_ENABLE);
3403 /* Switch from Rawclk to PCDclk */
3404 temp = I915_READ(reg);
3405 I915_WRITE(reg, temp | FDI_PCDCLK);
3410 /* Enable CPU FDI TX PLL, always on for Ironlake */
3411 reg = FDI_TX_CTL(pipe);
3412 temp = I915_READ(reg);
3413 if ((temp & FDI_TX_PLL_ENABLE) == 0) {
3414 I915_WRITE(reg, temp | FDI_TX_PLL_ENABLE);
3421 static void ironlake_fdi_pll_disable(struct intel_crtc *intel_crtc)
3423 struct drm_device *dev = intel_crtc->base.dev;
3424 struct drm_i915_private *dev_priv = dev->dev_private;
3425 int pipe = intel_crtc->pipe;
3428 /* Switch from PCDclk to Rawclk */
3429 reg = FDI_RX_CTL(pipe);
3430 temp = I915_READ(reg);
3431 I915_WRITE(reg, temp & ~FDI_PCDCLK);
3433 /* Disable CPU FDI TX PLL */
3434 reg = FDI_TX_CTL(pipe);
3435 temp = I915_READ(reg);
3436 I915_WRITE(reg, temp & ~FDI_TX_PLL_ENABLE);
3441 reg = FDI_RX_CTL(pipe);
3442 temp = I915_READ(reg);
3443 I915_WRITE(reg, temp & ~FDI_RX_PLL_ENABLE);
3445 /* Wait for the clocks to turn off. */
3450 static void ironlake_fdi_disable(struct drm_crtc *crtc)
3452 struct drm_device *dev = crtc->dev;
3453 struct drm_i915_private *dev_priv = dev->dev_private;
3454 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3455 int pipe = intel_crtc->pipe;
3458 /* disable CPU FDI tx and PCH FDI rx */
3459 reg = FDI_TX_CTL(pipe);
3460 temp = I915_READ(reg);
3461 I915_WRITE(reg, temp & ~FDI_TX_ENABLE);
3464 reg = FDI_RX_CTL(pipe);
3465 temp = I915_READ(reg);
3466 temp &= ~(0x7 << 16);
3467 temp |= (I915_READ(PIPECONF(pipe)) & PIPECONF_BPC_MASK) << 11;
3468 I915_WRITE(reg, temp & ~FDI_RX_ENABLE);
3473 /* Ironlake workaround, disable clock pointer after downing FDI */
3474 if (HAS_PCH_IBX(dev))
3475 I915_WRITE(FDI_RX_CHICKEN(pipe), FDI_RX_PHASE_SYNC_POINTER_OVR);
3477 /* still set train pattern 1 */
3478 reg = FDI_TX_CTL(pipe);
3479 temp = I915_READ(reg);
3480 temp &= ~FDI_LINK_TRAIN_NONE;
3481 temp |= FDI_LINK_TRAIN_PATTERN_1;
3482 I915_WRITE(reg, temp);
3484 reg = FDI_RX_CTL(pipe);
3485 temp = I915_READ(reg);
3486 if (HAS_PCH_CPT(dev)) {
3487 temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
3488 temp |= FDI_LINK_TRAIN_PATTERN_1_CPT;
3490 temp &= ~FDI_LINK_TRAIN_NONE;
3491 temp |= FDI_LINK_TRAIN_PATTERN_1;
3493 /* BPC in FDI rx is consistent with that in PIPECONF */
3494 temp &= ~(0x07 << 16);
3495 temp |= (I915_READ(PIPECONF(pipe)) & PIPECONF_BPC_MASK) << 11;
3496 I915_WRITE(reg, temp);
3502 bool intel_has_pending_fb_unpin(struct drm_device *dev)
3504 struct intel_crtc *crtc;
3506 /* Note that we don't need to be called with mode_config.lock here
3507 * as our list of CRTC objects is static for the lifetime of the
3508 * device and so cannot disappear as we iterate. Similarly, we can
3509 * happily treat the predicates as racy, atomic checks as userspace
3510 * cannot claim and pin a new fb without at least acquring the
3511 * struct_mutex and so serialising with us.
3513 for_each_intel_crtc(dev, crtc) {
3514 if (atomic_read(&crtc->unpin_work_count) == 0)
3517 if (crtc->unpin_work)
3518 intel_wait_for_vblank(dev, crtc->pipe);
3526 static void page_flip_completed(struct intel_crtc *intel_crtc)
3528 struct drm_i915_private *dev_priv = to_i915(intel_crtc->base.dev);
3529 struct intel_unpin_work *work = intel_crtc->unpin_work;
3531 /* ensure that the unpin work is consistent wrt ->pending. */
3533 intel_crtc->unpin_work = NULL;
3536 drm_send_vblank_event(intel_crtc->base.dev,
3540 drm_crtc_vblank_put(&intel_crtc->base);
3542 wake_up_all(&dev_priv->pending_flip_queue);
3543 queue_work(dev_priv->wq, &work->work);
3545 trace_i915_flip_complete(intel_crtc->plane,
3546 work->pending_flip_obj);
3549 void intel_crtc_wait_for_pending_flips(struct drm_crtc *crtc)
3551 struct drm_device *dev = crtc->dev;
3552 struct drm_i915_private *dev_priv = dev->dev_private;
3554 WARN_ON(waitqueue_active(&dev_priv->pending_flip_queue));
3555 if (WARN_ON(wait_event_timeout(dev_priv->pending_flip_queue,
3556 !intel_crtc_has_pending_flip(crtc),
3558 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3560 spin_lock_irq(&dev->event_lock);
3561 if (intel_crtc->unpin_work) {
3562 WARN_ONCE(1, "Removing stuck page flip\n");
3563 page_flip_completed(intel_crtc);
3565 spin_unlock_irq(&dev->event_lock);
3568 if (crtc->primary->fb) {
3569 mutex_lock(&dev->struct_mutex);
3570 intel_finish_fb(crtc->primary->fb);
3571 mutex_unlock(&dev->struct_mutex);
3575 /* Program iCLKIP clock to the desired frequency */
3576 static void lpt_program_iclkip(struct drm_crtc *crtc)
3578 struct drm_device *dev = crtc->dev;
3579 struct drm_i915_private *dev_priv = dev->dev_private;
3580 int clock = to_intel_crtc(crtc)->config.adjusted_mode.crtc_clock;
3581 u32 divsel, phaseinc, auxdiv, phasedir = 0;
3584 mutex_lock(&dev_priv->dpio_lock);
3586 /* It is necessary to ungate the pixclk gate prior to programming
3587 * the divisors, and gate it back when it is done.
3589 I915_WRITE(PIXCLK_GATE, PIXCLK_GATE_GATE);
3591 /* Disable SSCCTL */
3592 intel_sbi_write(dev_priv, SBI_SSCCTL6,
3593 intel_sbi_read(dev_priv, SBI_SSCCTL6, SBI_ICLK) |
3597 /* 20MHz is a corner case which is out of range for the 7-bit divisor */
3598 if (clock == 20000) {
3603 /* The iCLK virtual clock root frequency is in MHz,
3604 * but the adjusted_mode->crtc_clock in in KHz. To get the
3605 * divisors, it is necessary to divide one by another, so we
3606 * convert the virtual clock precision to KHz here for higher
3609 u32 iclk_virtual_root_freq = 172800 * 1000;
3610 u32 iclk_pi_range = 64;
3611 u32 desired_divisor, msb_divisor_value, pi_value;
3613 desired_divisor = (iclk_virtual_root_freq / clock);
3614 msb_divisor_value = desired_divisor / iclk_pi_range;
3615 pi_value = desired_divisor % iclk_pi_range;
3618 divsel = msb_divisor_value - 2;
3619 phaseinc = pi_value;
3622 /* This should not happen with any sane values */
3623 WARN_ON(SBI_SSCDIVINTPHASE_DIVSEL(divsel) &
3624 ~SBI_SSCDIVINTPHASE_DIVSEL_MASK);
3625 WARN_ON(SBI_SSCDIVINTPHASE_DIR(phasedir) &
3626 ~SBI_SSCDIVINTPHASE_INCVAL_MASK);
3628 DRM_DEBUG_KMS("iCLKIP clock: found settings for %dKHz refresh rate: auxdiv=%x, divsel=%x, phasedir=%x, phaseinc=%x\n",
3635 /* Program SSCDIVINTPHASE6 */
3636 temp = intel_sbi_read(dev_priv, SBI_SSCDIVINTPHASE6, SBI_ICLK);
3637 temp &= ~SBI_SSCDIVINTPHASE_DIVSEL_MASK;
3638 temp |= SBI_SSCDIVINTPHASE_DIVSEL(divsel);
3639 temp &= ~SBI_SSCDIVINTPHASE_INCVAL_MASK;
3640 temp |= SBI_SSCDIVINTPHASE_INCVAL(phaseinc);
3641 temp |= SBI_SSCDIVINTPHASE_DIR(phasedir);
3642 temp |= SBI_SSCDIVINTPHASE_PROPAGATE;
3643 intel_sbi_write(dev_priv, SBI_SSCDIVINTPHASE6, temp, SBI_ICLK);
3645 /* Program SSCAUXDIV */
3646 temp = intel_sbi_read(dev_priv, SBI_SSCAUXDIV6, SBI_ICLK);
3647 temp &= ~SBI_SSCAUXDIV_FINALDIV2SEL(1);
3648 temp |= SBI_SSCAUXDIV_FINALDIV2SEL(auxdiv);
3649 intel_sbi_write(dev_priv, SBI_SSCAUXDIV6, temp, SBI_ICLK);
3651 /* Enable modulator and associated divider */
3652 temp = intel_sbi_read(dev_priv, SBI_SSCCTL6, SBI_ICLK);
3653 temp &= ~SBI_SSCCTL_DISABLE;
3654 intel_sbi_write(dev_priv, SBI_SSCCTL6, temp, SBI_ICLK);
3656 /* Wait for initialization time */
3659 I915_WRITE(PIXCLK_GATE, PIXCLK_GATE_UNGATE);
3661 mutex_unlock(&dev_priv->dpio_lock);
3664 static void ironlake_pch_transcoder_set_timings(struct intel_crtc *crtc,
3665 enum pipe pch_transcoder)
3667 struct drm_device *dev = crtc->base.dev;
3668 struct drm_i915_private *dev_priv = dev->dev_private;
3669 enum transcoder cpu_transcoder = crtc->config.cpu_transcoder;
3671 I915_WRITE(PCH_TRANS_HTOTAL(pch_transcoder),
3672 I915_READ(HTOTAL(cpu_transcoder)));
3673 I915_WRITE(PCH_TRANS_HBLANK(pch_transcoder),
3674 I915_READ(HBLANK(cpu_transcoder)));
3675 I915_WRITE(PCH_TRANS_HSYNC(pch_transcoder),
3676 I915_READ(HSYNC(cpu_transcoder)));
3678 I915_WRITE(PCH_TRANS_VTOTAL(pch_transcoder),
3679 I915_READ(VTOTAL(cpu_transcoder)));
3680 I915_WRITE(PCH_TRANS_VBLANK(pch_transcoder),
3681 I915_READ(VBLANK(cpu_transcoder)));
3682 I915_WRITE(PCH_TRANS_VSYNC(pch_transcoder),
3683 I915_READ(VSYNC(cpu_transcoder)));
3684 I915_WRITE(PCH_TRANS_VSYNCSHIFT(pch_transcoder),
3685 I915_READ(VSYNCSHIFT(cpu_transcoder)));
3688 static void cpt_enable_fdi_bc_bifurcation(struct drm_device *dev)
3690 struct drm_i915_private *dev_priv = dev->dev_private;
3693 temp = I915_READ(SOUTH_CHICKEN1);
3694 if (temp & FDI_BC_BIFURCATION_SELECT)
3697 WARN_ON(I915_READ(FDI_RX_CTL(PIPE_B)) & FDI_RX_ENABLE);
3698 WARN_ON(I915_READ(FDI_RX_CTL(PIPE_C)) & FDI_RX_ENABLE);
3700 temp |= FDI_BC_BIFURCATION_SELECT;
3701 DRM_DEBUG_KMS("enabling fdi C rx\n");
3702 I915_WRITE(SOUTH_CHICKEN1, temp);
3703 POSTING_READ(SOUTH_CHICKEN1);
3706 static void ivybridge_update_fdi_bc_bifurcation(struct intel_crtc *intel_crtc)
3708 struct drm_device *dev = intel_crtc->base.dev;
3709 struct drm_i915_private *dev_priv = dev->dev_private;
3711 switch (intel_crtc->pipe) {
3715 if (intel_crtc->config.fdi_lanes > 2)
3716 WARN_ON(I915_READ(SOUTH_CHICKEN1) & FDI_BC_BIFURCATION_SELECT);
3718 cpt_enable_fdi_bc_bifurcation(dev);
3722 cpt_enable_fdi_bc_bifurcation(dev);
3731 * Enable PCH resources required for PCH ports:
3733 * - FDI training & RX/TX
3734 * - update transcoder timings
3735 * - DP transcoding bits
3738 static void ironlake_pch_enable(struct drm_crtc *crtc)
3740 struct drm_device *dev = crtc->dev;
3741 struct drm_i915_private *dev_priv = dev->dev_private;
3742 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3743 int pipe = intel_crtc->pipe;
3746 assert_pch_transcoder_disabled(dev_priv, pipe);
3748 if (IS_IVYBRIDGE(dev))
3749 ivybridge_update_fdi_bc_bifurcation(intel_crtc);
3751 /* Write the TU size bits before fdi link training, so that error
3752 * detection works. */
3753 I915_WRITE(FDI_RX_TUSIZE1(pipe),
3754 I915_READ(PIPE_DATA_M1(pipe)) & TU_SIZE_MASK);
3756 /* For PCH output, training FDI link */
3757 dev_priv->display.fdi_link_train(crtc);
3759 /* We need to program the right clock selection before writing the pixel
3760 * mutliplier into the DPLL. */
3761 if (HAS_PCH_CPT(dev)) {
3764 temp = I915_READ(PCH_DPLL_SEL);
3765 temp |= TRANS_DPLL_ENABLE(pipe);
3766 sel = TRANS_DPLLB_SEL(pipe);
3767 if (intel_crtc->config.shared_dpll == DPLL_ID_PCH_PLL_B)
3771 I915_WRITE(PCH_DPLL_SEL, temp);
3774 /* XXX: pch pll's can be enabled any time before we enable the PCH
3775 * transcoder, and we actually should do this to not upset any PCH
3776 * transcoder that already use the clock when we share it.
3778 * Note that enable_shared_dpll tries to do the right thing, but
3779 * get_shared_dpll unconditionally resets the pll - we need that to have
3780 * the right LVDS enable sequence. */
3781 intel_enable_shared_dpll(intel_crtc);
3783 /* set transcoder timing, panel must allow it */
3784 assert_panel_unlocked(dev_priv, pipe);
3785 ironlake_pch_transcoder_set_timings(intel_crtc, pipe);
3787 intel_fdi_normal_train(crtc);
3789 /* For PCH DP, enable TRANS_DP_CTL */
3790 if (HAS_PCH_CPT(dev) && intel_crtc->config.has_dp_encoder) {
3791 u32 bpc = (I915_READ(PIPECONF(pipe)) & PIPECONF_BPC_MASK) >> 5;
3792 reg = TRANS_DP_CTL(pipe);
3793 temp = I915_READ(reg);
3794 temp &= ~(TRANS_DP_PORT_SEL_MASK |
3795 TRANS_DP_SYNC_MASK |
3797 temp |= (TRANS_DP_OUTPUT_ENABLE |
3798 TRANS_DP_ENH_FRAMING);
3799 temp |= bpc << 9; /* same format but at 11:9 */
3801 if (crtc->mode.flags & DRM_MODE_FLAG_PHSYNC)
3802 temp |= TRANS_DP_HSYNC_ACTIVE_HIGH;
3803 if (crtc->mode.flags & DRM_MODE_FLAG_PVSYNC)
3804 temp |= TRANS_DP_VSYNC_ACTIVE_HIGH;
3806 switch (intel_trans_dp_port_sel(crtc)) {
3808 temp |= TRANS_DP_PORT_SEL_B;
3811 temp |= TRANS_DP_PORT_SEL_C;
3814 temp |= TRANS_DP_PORT_SEL_D;
3820 I915_WRITE(reg, temp);
3823 ironlake_enable_pch_transcoder(dev_priv, pipe);
3826 static void lpt_pch_enable(struct drm_crtc *crtc)
3828 struct drm_device *dev = crtc->dev;
3829 struct drm_i915_private *dev_priv = dev->dev_private;
3830 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3831 enum transcoder cpu_transcoder = intel_crtc->config.cpu_transcoder;
3833 assert_pch_transcoder_disabled(dev_priv, TRANSCODER_A);
3835 lpt_program_iclkip(crtc);
3837 /* Set transcoder timing. */
3838 ironlake_pch_transcoder_set_timings(intel_crtc, PIPE_A);
3840 lpt_enable_pch_transcoder(dev_priv, cpu_transcoder);
3843 void intel_put_shared_dpll(struct intel_crtc *crtc)
3845 struct intel_shared_dpll *pll = intel_crtc_to_shared_dpll(crtc);
3850 if (!(pll->config.crtc_mask & (1 << crtc->pipe))) {
3851 WARN(1, "bad %s crtc mask\n", pll->name);
3855 pll->config.crtc_mask &= ~(1 << crtc->pipe);
3856 if (pll->config.crtc_mask == 0) {
3858 WARN_ON(pll->active);
3861 crtc->config.shared_dpll = DPLL_ID_PRIVATE;
3864 struct intel_shared_dpll *intel_get_shared_dpll(struct intel_crtc *crtc)
3866 struct drm_i915_private *dev_priv = crtc->base.dev->dev_private;
3867 struct intel_shared_dpll *pll;
3868 enum intel_dpll_id i;
3870 if (HAS_PCH_IBX(dev_priv->dev)) {
3871 /* Ironlake PCH has a fixed PLL->PCH pipe mapping. */
3872 i = (enum intel_dpll_id) crtc->pipe;
3873 pll = &dev_priv->shared_dplls[i];
3875 DRM_DEBUG_KMS("CRTC:%d using pre-allocated %s\n",
3876 crtc->base.base.id, pll->name);
3878 WARN_ON(pll->new_config->crtc_mask);
3883 for (i = 0; i < dev_priv->num_shared_dpll; i++) {
3884 pll = &dev_priv->shared_dplls[i];
3886 /* Only want to check enabled timings first */
3887 if (pll->new_config->crtc_mask == 0)
3890 if (memcmp(&crtc->new_config->dpll_hw_state,
3891 &pll->new_config->hw_state,
3892 sizeof(pll->new_config->hw_state)) == 0) {
3893 DRM_DEBUG_KMS("CRTC:%d sharing existing %s (crtc mask 0x%08x, ative %d)\n",
3894 crtc->base.base.id, pll->name,
3895 pll->new_config->crtc_mask,
3901 /* Ok no matching timings, maybe there's a free one? */
3902 for (i = 0; i < dev_priv->num_shared_dpll; i++) {
3903 pll = &dev_priv->shared_dplls[i];
3904 if (pll->new_config->crtc_mask == 0) {
3905 DRM_DEBUG_KMS("CRTC:%d allocated %s\n",
3906 crtc->base.base.id, pll->name);
3914 if (pll->new_config->crtc_mask == 0)
3915 pll->new_config->hw_state = crtc->new_config->dpll_hw_state;
3917 crtc->new_config->shared_dpll = i;
3918 DRM_DEBUG_DRIVER("using %s for pipe %c\n", pll->name,
3919 pipe_name(crtc->pipe));
3921 pll->new_config->crtc_mask |= 1 << crtc->pipe;
3927 * intel_shared_dpll_start_config - start a new PLL staged config
3928 * @dev_priv: DRM device
3929 * @clear_pipes: mask of pipes that will have their PLLs freed
3931 * Starts a new PLL staged config, copying the current config but
3932 * releasing the references of pipes specified in clear_pipes.
3934 static int intel_shared_dpll_start_config(struct drm_i915_private *dev_priv,
3935 unsigned clear_pipes)
3937 struct intel_shared_dpll *pll;
3938 enum intel_dpll_id i;
3940 for (i = 0; i < dev_priv->num_shared_dpll; i++) {
3941 pll = &dev_priv->shared_dplls[i];
3943 pll->new_config = kmemdup(&pll->config, sizeof pll->config,
3945 if (!pll->new_config)
3948 pll->new_config->crtc_mask &= ~clear_pipes;
3955 pll = &dev_priv->shared_dplls[i];
3956 kfree(pll->new_config);
3957 pll->new_config = NULL;
3963 static void intel_shared_dpll_commit(struct drm_i915_private *dev_priv)
3965 struct intel_shared_dpll *pll;
3966 enum intel_dpll_id i;
3968 for (i = 0; i < dev_priv->num_shared_dpll; i++) {
3969 pll = &dev_priv->shared_dplls[i];
3971 WARN_ON(pll->new_config == &pll->config);
3973 pll->config = *pll->new_config;
3974 kfree(pll->new_config);
3975 pll->new_config = NULL;
3979 static void intel_shared_dpll_abort_config(struct drm_i915_private *dev_priv)
3981 struct intel_shared_dpll *pll;
3982 enum intel_dpll_id i;
3984 for (i = 0; i < dev_priv->num_shared_dpll; i++) {
3985 pll = &dev_priv->shared_dplls[i];
3987 WARN_ON(pll->new_config == &pll->config);
3989 kfree(pll->new_config);
3990 pll->new_config = NULL;
3994 static void cpt_verify_modeset(struct drm_device *dev, int pipe)
3996 struct drm_i915_private *dev_priv = dev->dev_private;
3997 int dslreg = PIPEDSL(pipe);
4000 temp = I915_READ(dslreg);
4002 if (wait_for(I915_READ(dslreg) != temp, 5)) {
4003 if (wait_for(I915_READ(dslreg) != temp, 5))
4004 DRM_ERROR("mode set failed: pipe %c stuck\n", pipe_name(pipe));
4008 static void ironlake_pfit_enable(struct intel_crtc *crtc)
4010 struct drm_device *dev = crtc->base.dev;
4011 struct drm_i915_private *dev_priv = dev->dev_private;
4012 int pipe = crtc->pipe;
4014 if (crtc->config.pch_pfit.enabled) {
4015 /* Force use of hard-coded filter coefficients
4016 * as some pre-programmed values are broken,
4019 if (IS_IVYBRIDGE(dev) || IS_HASWELL(dev))
4020 I915_WRITE(PF_CTL(pipe), PF_ENABLE | PF_FILTER_MED_3x3 |
4021 PF_PIPE_SEL_IVB(pipe));
4023 I915_WRITE(PF_CTL(pipe), PF_ENABLE | PF_FILTER_MED_3x3);
4024 I915_WRITE(PF_WIN_POS(pipe), crtc->config.pch_pfit.pos);
4025 I915_WRITE(PF_WIN_SZ(pipe), crtc->config.pch_pfit.size);
4029 static void intel_enable_planes(struct drm_crtc *crtc)
4031 struct drm_device *dev = crtc->dev;
4032 enum pipe pipe = to_intel_crtc(crtc)->pipe;
4033 struct drm_plane *plane;
4034 struct intel_plane *intel_plane;
4036 drm_for_each_legacy_plane(plane, &dev->mode_config.plane_list) {
4037 intel_plane = to_intel_plane(plane);
4038 if (intel_plane->pipe == pipe)
4039 intel_plane_restore(&intel_plane->base);
4043 static void intel_disable_planes(struct drm_crtc *crtc)
4045 struct drm_device *dev = crtc->dev;
4046 enum pipe pipe = to_intel_crtc(crtc)->pipe;
4047 struct drm_plane *plane;
4048 struct intel_plane *intel_plane;
4050 drm_for_each_legacy_plane(plane, &dev->mode_config.plane_list) {
4051 intel_plane = to_intel_plane(plane);
4052 if (intel_plane->pipe == pipe)
4053 intel_plane_disable(&intel_plane->base);
4057 void hsw_enable_ips(struct intel_crtc *crtc)
4059 struct drm_device *dev = crtc->base.dev;
4060 struct drm_i915_private *dev_priv = dev->dev_private;
4062 if (!crtc->config.ips_enabled)
4065 /* We can only enable IPS after we enable a plane and wait for a vblank */
4066 intel_wait_for_vblank(dev, crtc->pipe);
4068 assert_plane_enabled(dev_priv, crtc->plane);
4069 if (IS_BROADWELL(dev)) {
4070 mutex_lock(&dev_priv->rps.hw_lock);
4071 WARN_ON(sandybridge_pcode_write(dev_priv, DISPLAY_IPS_CONTROL, 0xc0000000));
4072 mutex_unlock(&dev_priv->rps.hw_lock);
4073 /* Quoting Art Runyan: "its not safe to expect any particular
4074 * value in IPS_CTL bit 31 after enabling IPS through the
4075 * mailbox." Moreover, the mailbox may return a bogus state,
4076 * so we need to just enable it and continue on.
4079 I915_WRITE(IPS_CTL, IPS_ENABLE);
4080 /* The bit only becomes 1 in the next vblank, so this wait here
4081 * is essentially intel_wait_for_vblank. If we don't have this
4082 * and don't wait for vblanks until the end of crtc_enable, then
4083 * the HW state readout code will complain that the expected
4084 * IPS_CTL value is not the one we read. */
4085 if (wait_for(I915_READ_NOTRACE(IPS_CTL) & IPS_ENABLE, 50))
4086 DRM_ERROR("Timed out waiting for IPS enable\n");
4090 void hsw_disable_ips(struct intel_crtc *crtc)
4092 struct drm_device *dev = crtc->base.dev;
4093 struct drm_i915_private *dev_priv = dev->dev_private;
4095 if (!crtc->config.ips_enabled)
4098 assert_plane_enabled(dev_priv, crtc->plane);
4099 if (IS_BROADWELL(dev)) {
4100 mutex_lock(&dev_priv->rps.hw_lock);
4101 WARN_ON(sandybridge_pcode_write(dev_priv, DISPLAY_IPS_CONTROL, 0));
4102 mutex_unlock(&dev_priv->rps.hw_lock);
4103 /* wait for pcode to finish disabling IPS, which may take up to 42ms */
4104 if (wait_for((I915_READ(IPS_CTL) & IPS_ENABLE) == 0, 42))
4105 DRM_ERROR("Timed out waiting for IPS disable\n");
4107 I915_WRITE(IPS_CTL, 0);
4108 POSTING_READ(IPS_CTL);
4111 /* We need to wait for a vblank before we can disable the plane. */
4112 intel_wait_for_vblank(dev, crtc->pipe);
4115 /** Loads the palette/gamma unit for the CRTC with the prepared values */
4116 static void intel_crtc_load_lut(struct drm_crtc *crtc)
4118 struct drm_device *dev = crtc->dev;
4119 struct drm_i915_private *dev_priv = dev->dev_private;
4120 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
4121 enum pipe pipe = intel_crtc->pipe;
4122 int palreg = PALETTE(pipe);
4124 bool reenable_ips = false;
4126 /* The clocks have to be on to load the palette. */
4127 if (!crtc->enabled || !intel_crtc->active)
4130 if (!HAS_PCH_SPLIT(dev_priv->dev)) {
4131 if (intel_pipe_has_type(intel_crtc, INTEL_OUTPUT_DSI))
4132 assert_dsi_pll_enabled(dev_priv);
4134 assert_pll_enabled(dev_priv, pipe);
4137 /* use legacy palette for Ironlake */
4138 if (!HAS_GMCH_DISPLAY(dev))
4139 palreg = LGC_PALETTE(pipe);
4141 /* Workaround : Do not read or write the pipe palette/gamma data while
4142 * GAMMA_MODE is configured for split gamma and IPS_CTL has IPS enabled.
4144 if (IS_HASWELL(dev) && intel_crtc->config.ips_enabled &&
4145 ((I915_READ(GAMMA_MODE(pipe)) & GAMMA_MODE_MODE_MASK) ==
4146 GAMMA_MODE_MODE_SPLIT)) {
4147 hsw_disable_ips(intel_crtc);
4148 reenable_ips = true;
4151 for (i = 0; i < 256; i++) {
4152 I915_WRITE(palreg + 4 * i,
4153 (intel_crtc->lut_r[i] << 16) |
4154 (intel_crtc->lut_g[i] << 8) |
4155 intel_crtc->lut_b[i]);
4159 hsw_enable_ips(intel_crtc);
4162 static void intel_crtc_dpms_overlay(struct intel_crtc *intel_crtc, bool enable)
4164 if (!enable && intel_crtc->overlay) {
4165 struct drm_device *dev = intel_crtc->base.dev;
4166 struct drm_i915_private *dev_priv = dev->dev_private;
4168 mutex_lock(&dev->struct_mutex);
4169 dev_priv->mm.interruptible = false;
4170 (void) intel_overlay_switch_off(intel_crtc->overlay);
4171 dev_priv->mm.interruptible = true;
4172 mutex_unlock(&dev->struct_mutex);
4175 /* Let userspace switch the overlay on again. In most cases userspace
4176 * has to recompute where to put it anyway.
4180 static void intel_crtc_enable_planes(struct drm_crtc *crtc)
4182 struct drm_device *dev = crtc->dev;
4183 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
4184 int pipe = intel_crtc->pipe;
4186 intel_enable_primary_hw_plane(crtc->primary, crtc);
4187 intel_enable_planes(crtc);
4188 intel_crtc_update_cursor(crtc, true);
4189 intel_crtc_dpms_overlay(intel_crtc, true);
4191 hsw_enable_ips(intel_crtc);
4193 mutex_lock(&dev->struct_mutex);
4194 intel_update_fbc(dev);
4195 mutex_unlock(&dev->struct_mutex);
4198 * FIXME: Once we grow proper nuclear flip support out of this we need
4199 * to compute the mask of flip planes precisely. For the time being
4200 * consider this a flip from a NULL plane.
4202 intel_frontbuffer_flip(dev, INTEL_FRONTBUFFER_ALL_MASK(pipe));
4205 static void intel_crtc_disable_planes(struct drm_crtc *crtc)
4207 struct drm_device *dev = crtc->dev;
4208 struct drm_i915_private *dev_priv = dev->dev_private;
4209 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
4210 int pipe = intel_crtc->pipe;
4211 int plane = intel_crtc->plane;
4213 intel_crtc_wait_for_pending_flips(crtc);
4215 if (dev_priv->fbc.plane == plane)
4216 intel_disable_fbc(dev);
4218 hsw_disable_ips(intel_crtc);
4220 intel_crtc_dpms_overlay(intel_crtc, false);
4221 intel_crtc_update_cursor(crtc, false);
4222 intel_disable_planes(crtc);
4223 intel_disable_primary_hw_plane(crtc->primary, crtc);
4226 * FIXME: Once we grow proper nuclear flip support out of this we need
4227 * to compute the mask of flip planes precisely. For the time being
4228 * consider this a flip to a NULL plane.
4230 intel_frontbuffer_flip(dev, INTEL_FRONTBUFFER_ALL_MASK(pipe));
4233 static void ironlake_crtc_enable(struct drm_crtc *crtc)
4235 struct drm_device *dev = crtc->dev;
4236 struct drm_i915_private *dev_priv = dev->dev_private;
4237 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
4238 struct intel_encoder *encoder;
4239 int pipe = intel_crtc->pipe;
4241 WARN_ON(!crtc->enabled);
4243 if (intel_crtc->active)
4246 if (intel_crtc->config.has_pch_encoder)
4247 intel_prepare_shared_dpll(intel_crtc);
4249 if (intel_crtc->config.has_dp_encoder)
4250 intel_dp_set_m_n(intel_crtc);
4252 intel_set_pipe_timings(intel_crtc);
4254 if (intel_crtc->config.has_pch_encoder) {
4255 intel_cpu_transcoder_set_m_n(intel_crtc,
4256 &intel_crtc->config.fdi_m_n, NULL);
4259 ironlake_set_pipeconf(crtc);
4261 intel_crtc->active = true;
4263 intel_set_cpu_fifo_underrun_reporting(dev_priv, pipe, true);
4264 intel_set_pch_fifo_underrun_reporting(dev_priv, pipe, true);
4266 for_each_encoder_on_crtc(dev, crtc, encoder)
4267 if (encoder->pre_enable)
4268 encoder->pre_enable(encoder);
4270 if (intel_crtc->config.has_pch_encoder) {
4271 /* Note: FDI PLL enabling _must_ be done before we enable the
4272 * cpu pipes, hence this is separate from all the other fdi/pch
4274 ironlake_fdi_pll_enable(intel_crtc);
4276 assert_fdi_tx_disabled(dev_priv, pipe);
4277 assert_fdi_rx_disabled(dev_priv, pipe);
4280 ironlake_pfit_enable(intel_crtc);
4283 * On ILK+ LUT must be loaded before the pipe is running but with
4286 intel_crtc_load_lut(crtc);
4288 intel_update_watermarks(crtc);
4289 intel_enable_pipe(intel_crtc);
4291 if (intel_crtc->config.has_pch_encoder)
4292 ironlake_pch_enable(crtc);
4294 for_each_encoder_on_crtc(dev, crtc, encoder)
4295 encoder->enable(encoder);
4297 if (HAS_PCH_CPT(dev))
4298 cpt_verify_modeset(dev, intel_crtc->pipe);
4300 assert_vblank_disabled(crtc);
4301 drm_crtc_vblank_on(crtc);
4303 intel_crtc_enable_planes(crtc);
4306 /* IPS only exists on ULT machines and is tied to pipe A. */
4307 static bool hsw_crtc_supports_ips(struct intel_crtc *crtc)
4309 return HAS_IPS(crtc->base.dev) && crtc->pipe == PIPE_A;
4313 * This implements the workaround described in the "notes" section of the mode
4314 * set sequence documentation. When going from no pipes or single pipe to
4315 * multiple pipes, and planes are enabled after the pipe, we need to wait at
4316 * least 2 vblanks on the first pipe before enabling planes on the second pipe.
4318 static void haswell_mode_set_planes_workaround(struct intel_crtc *crtc)
4320 struct drm_device *dev = crtc->base.dev;
4321 struct intel_crtc *crtc_it, *other_active_crtc = NULL;
4323 /* We want to get the other_active_crtc only if there's only 1 other
4325 for_each_intel_crtc(dev, crtc_it) {
4326 if (!crtc_it->active || crtc_it == crtc)
4329 if (other_active_crtc)
4332 other_active_crtc = crtc_it;
4334 if (!other_active_crtc)
4337 intel_wait_for_vblank(dev, other_active_crtc->pipe);
4338 intel_wait_for_vblank(dev, other_active_crtc->pipe);
4341 static void haswell_crtc_enable(struct drm_crtc *crtc)
4343 struct drm_device *dev = crtc->dev;
4344 struct drm_i915_private *dev_priv = dev->dev_private;
4345 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
4346 struct intel_encoder *encoder;
4347 int pipe = intel_crtc->pipe;
4349 WARN_ON(!crtc->enabled);
4351 if (intel_crtc->active)
4354 if (intel_crtc_to_shared_dpll(intel_crtc))
4355 intel_enable_shared_dpll(intel_crtc);
4357 if (intel_crtc->config.has_dp_encoder)
4358 intel_dp_set_m_n(intel_crtc);
4360 intel_set_pipe_timings(intel_crtc);
4362 if (intel_crtc->config.cpu_transcoder != TRANSCODER_EDP) {
4363 I915_WRITE(PIPE_MULT(intel_crtc->config.cpu_transcoder),
4364 intel_crtc->config.pixel_multiplier - 1);
4367 if (intel_crtc->config.has_pch_encoder) {
4368 intel_cpu_transcoder_set_m_n(intel_crtc,
4369 &intel_crtc->config.fdi_m_n, NULL);
4372 haswell_set_pipeconf(crtc);
4374 intel_set_pipe_csc(crtc);
4376 intel_crtc->active = true;
4378 intel_set_cpu_fifo_underrun_reporting(dev_priv, pipe, true);
4379 for_each_encoder_on_crtc(dev, crtc, encoder)
4380 if (encoder->pre_enable)
4381 encoder->pre_enable(encoder);
4383 if (intel_crtc->config.has_pch_encoder) {
4384 intel_set_pch_fifo_underrun_reporting(dev_priv, TRANSCODER_A,
4386 dev_priv->display.fdi_link_train(crtc);
4389 intel_ddi_enable_pipe_clock(intel_crtc);
4391 ironlake_pfit_enable(intel_crtc);
4394 * On ILK+ LUT must be loaded before the pipe is running but with
4397 intel_crtc_load_lut(crtc);
4399 intel_ddi_set_pipe_settings(crtc);
4400 intel_ddi_enable_transcoder_func(crtc);
4402 intel_update_watermarks(crtc);
4403 intel_enable_pipe(intel_crtc);
4405 if (intel_crtc->config.has_pch_encoder)
4406 lpt_pch_enable(crtc);
4408 if (intel_crtc->config.dp_encoder_is_mst)
4409 intel_ddi_set_vc_payload_alloc(crtc, true);
4411 for_each_encoder_on_crtc(dev, crtc, encoder) {
4412 encoder->enable(encoder);
4413 intel_opregion_notify_encoder(encoder, true);
4416 assert_vblank_disabled(crtc);
4417 drm_crtc_vblank_on(crtc);
4419 /* If we change the relative order between pipe/planes enabling, we need
4420 * to change the workaround. */
4421 haswell_mode_set_planes_workaround(intel_crtc);
4422 intel_crtc_enable_planes(crtc);
4425 static void ironlake_pfit_disable(struct intel_crtc *crtc)
4427 struct drm_device *dev = crtc->base.dev;
4428 struct drm_i915_private *dev_priv = dev->dev_private;
4429 int pipe = crtc->pipe;
4431 /* To avoid upsetting the power well on haswell only disable the pfit if
4432 * it's in use. The hw state code will make sure we get this right. */
4433 if (crtc->config.pch_pfit.enabled) {
4434 I915_WRITE(PF_CTL(pipe), 0);
4435 I915_WRITE(PF_WIN_POS(pipe), 0);
4436 I915_WRITE(PF_WIN_SZ(pipe), 0);
4440 static void ironlake_crtc_disable(struct drm_crtc *crtc)
4442 struct drm_device *dev = crtc->dev;
4443 struct drm_i915_private *dev_priv = dev->dev_private;
4444 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
4445 struct intel_encoder *encoder;
4446 int pipe = intel_crtc->pipe;
4449 if (!intel_crtc->active)
4452 intel_crtc_disable_planes(crtc);
4454 drm_crtc_vblank_off(crtc);
4455 assert_vblank_disabled(crtc);
4457 for_each_encoder_on_crtc(dev, crtc, encoder)
4458 encoder->disable(encoder);
4460 if (intel_crtc->config.has_pch_encoder)
4461 intel_set_pch_fifo_underrun_reporting(dev_priv, pipe, false);
4463 intel_disable_pipe(intel_crtc);
4465 ironlake_pfit_disable(intel_crtc);
4467 for_each_encoder_on_crtc(dev, crtc, encoder)
4468 if (encoder->post_disable)
4469 encoder->post_disable(encoder);
4471 if (intel_crtc->config.has_pch_encoder) {
4472 ironlake_fdi_disable(crtc);
4474 ironlake_disable_pch_transcoder(dev_priv, pipe);
4475 intel_set_pch_fifo_underrun_reporting(dev_priv, pipe, true);
4477 if (HAS_PCH_CPT(dev)) {
4478 /* disable TRANS_DP_CTL */
4479 reg = TRANS_DP_CTL(pipe);
4480 temp = I915_READ(reg);
4481 temp &= ~(TRANS_DP_OUTPUT_ENABLE |
4482 TRANS_DP_PORT_SEL_MASK);
4483 temp |= TRANS_DP_PORT_SEL_NONE;
4484 I915_WRITE(reg, temp);
4486 /* disable DPLL_SEL */
4487 temp = I915_READ(PCH_DPLL_SEL);
4488 temp &= ~(TRANS_DPLL_ENABLE(pipe) | TRANS_DPLLB_SEL(pipe));
4489 I915_WRITE(PCH_DPLL_SEL, temp);
4492 /* disable PCH DPLL */
4493 intel_disable_shared_dpll(intel_crtc);
4495 ironlake_fdi_pll_disable(intel_crtc);
4498 intel_crtc->active = false;
4499 intel_update_watermarks(crtc);
4501 mutex_lock(&dev->struct_mutex);
4502 intel_update_fbc(dev);
4503 mutex_unlock(&dev->struct_mutex);
4506 static void haswell_crtc_disable(struct drm_crtc *crtc)
4508 struct drm_device *dev = crtc->dev;
4509 struct drm_i915_private *dev_priv = dev->dev_private;
4510 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
4511 struct intel_encoder *encoder;
4512 enum transcoder cpu_transcoder = intel_crtc->config.cpu_transcoder;
4514 if (!intel_crtc->active)
4517 intel_crtc_disable_planes(crtc);
4519 drm_crtc_vblank_off(crtc);
4520 assert_vblank_disabled(crtc);
4522 for_each_encoder_on_crtc(dev, crtc, encoder) {
4523 intel_opregion_notify_encoder(encoder, false);
4524 encoder->disable(encoder);
4527 if (intel_crtc->config.has_pch_encoder)
4528 intel_set_pch_fifo_underrun_reporting(dev_priv, TRANSCODER_A,
4530 intel_disable_pipe(intel_crtc);
4532 if (intel_crtc->config.dp_encoder_is_mst)
4533 intel_ddi_set_vc_payload_alloc(crtc, false);
4535 intel_ddi_disable_transcoder_func(dev_priv, cpu_transcoder);
4537 ironlake_pfit_disable(intel_crtc);
4539 intel_ddi_disable_pipe_clock(intel_crtc);
4541 if (intel_crtc->config.has_pch_encoder) {
4542 lpt_disable_pch_transcoder(dev_priv);
4543 intel_set_pch_fifo_underrun_reporting(dev_priv, TRANSCODER_A,
4545 intel_ddi_fdi_disable(crtc);
4548 for_each_encoder_on_crtc(dev, crtc, encoder)
4549 if (encoder->post_disable)
4550 encoder->post_disable(encoder);
4552 intel_crtc->active = false;
4553 intel_update_watermarks(crtc);
4555 mutex_lock(&dev->struct_mutex);
4556 intel_update_fbc(dev);
4557 mutex_unlock(&dev->struct_mutex);
4559 if (intel_crtc_to_shared_dpll(intel_crtc))
4560 intel_disable_shared_dpll(intel_crtc);
4563 static void ironlake_crtc_off(struct drm_crtc *crtc)
4565 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
4566 intel_put_shared_dpll(intel_crtc);
4570 static void i9xx_pfit_enable(struct intel_crtc *crtc)
4572 struct drm_device *dev = crtc->base.dev;
4573 struct drm_i915_private *dev_priv = dev->dev_private;
4574 struct intel_crtc_config *pipe_config = &crtc->config;
4576 if (!crtc->config.gmch_pfit.control)
4580 * The panel fitter should only be adjusted whilst the pipe is disabled,
4581 * according to register description and PRM.
4583 WARN_ON(I915_READ(PFIT_CONTROL) & PFIT_ENABLE);
4584 assert_pipe_disabled(dev_priv, crtc->pipe);
4586 I915_WRITE(PFIT_PGM_RATIOS, pipe_config->gmch_pfit.pgm_ratios);
4587 I915_WRITE(PFIT_CONTROL, pipe_config->gmch_pfit.control);
4589 /* Border color in case we don't scale up to the full screen. Black by
4590 * default, change to something else for debugging. */
4591 I915_WRITE(BCLRPAT(crtc->pipe), 0);
4594 static enum intel_display_power_domain port_to_power_domain(enum port port)
4598 return POWER_DOMAIN_PORT_DDI_A_4_LANES;
4600 return POWER_DOMAIN_PORT_DDI_B_4_LANES;
4602 return POWER_DOMAIN_PORT_DDI_C_4_LANES;
4604 return POWER_DOMAIN_PORT_DDI_D_4_LANES;
4607 return POWER_DOMAIN_PORT_OTHER;
4611 #define for_each_power_domain(domain, mask) \
4612 for ((domain) = 0; (domain) < POWER_DOMAIN_NUM; (domain)++) \
4613 if ((1 << (domain)) & (mask))
4615 enum intel_display_power_domain
4616 intel_display_port_power_domain(struct intel_encoder *intel_encoder)
4618 struct drm_device *dev = intel_encoder->base.dev;
4619 struct intel_digital_port *intel_dig_port;
4621 switch (intel_encoder->type) {
4622 case INTEL_OUTPUT_UNKNOWN:
4623 /* Only DDI platforms should ever use this output type */
4624 WARN_ON_ONCE(!HAS_DDI(dev));
4625 case INTEL_OUTPUT_DISPLAYPORT:
4626 case INTEL_OUTPUT_HDMI:
4627 case INTEL_OUTPUT_EDP:
4628 intel_dig_port = enc_to_dig_port(&intel_encoder->base);
4629 return port_to_power_domain(intel_dig_port->port);
4630 case INTEL_OUTPUT_DP_MST:
4631 intel_dig_port = enc_to_mst(&intel_encoder->base)->primary;
4632 return port_to_power_domain(intel_dig_port->port);
4633 case INTEL_OUTPUT_ANALOG:
4634 return POWER_DOMAIN_PORT_CRT;
4635 case INTEL_OUTPUT_DSI:
4636 return POWER_DOMAIN_PORT_DSI;
4638 return POWER_DOMAIN_PORT_OTHER;
4642 static unsigned long get_crtc_power_domains(struct drm_crtc *crtc)
4644 struct drm_device *dev = crtc->dev;
4645 struct intel_encoder *intel_encoder;
4646 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
4647 enum pipe pipe = intel_crtc->pipe;
4649 enum transcoder transcoder;
4651 transcoder = intel_pipe_to_cpu_transcoder(dev->dev_private, pipe);
4653 mask = BIT(POWER_DOMAIN_PIPE(pipe));
4654 mask |= BIT(POWER_DOMAIN_TRANSCODER(transcoder));
4655 if (intel_crtc->config.pch_pfit.enabled ||
4656 intel_crtc->config.pch_pfit.force_thru)
4657 mask |= BIT(POWER_DOMAIN_PIPE_PANEL_FITTER(pipe));
4659 for_each_encoder_on_crtc(dev, crtc, intel_encoder)
4660 mask |= BIT(intel_display_port_power_domain(intel_encoder));
4665 static void modeset_update_crtc_power_domains(struct drm_device *dev)
4667 struct drm_i915_private *dev_priv = dev->dev_private;
4668 unsigned long pipe_domains[I915_MAX_PIPES] = { 0, };
4669 struct intel_crtc *crtc;
4672 * First get all needed power domains, then put all unneeded, to avoid
4673 * any unnecessary toggling of the power wells.
4675 for_each_intel_crtc(dev, crtc) {
4676 enum intel_display_power_domain domain;
4678 if (!crtc->base.enabled)
4681 pipe_domains[crtc->pipe] = get_crtc_power_domains(&crtc->base);
4683 for_each_power_domain(domain, pipe_domains[crtc->pipe])
4684 intel_display_power_get(dev_priv, domain);
4687 if (dev_priv->display.modeset_global_resources)
4688 dev_priv->display.modeset_global_resources(dev);
4690 for_each_intel_crtc(dev, crtc) {
4691 enum intel_display_power_domain domain;
4693 for_each_power_domain(domain, crtc->enabled_power_domains)
4694 intel_display_power_put(dev_priv, domain);
4696 crtc->enabled_power_domains = pipe_domains[crtc->pipe];
4699 intel_display_set_init_power(dev_priv, false);
4702 /* returns HPLL frequency in kHz */
4703 static int valleyview_get_vco(struct drm_i915_private *dev_priv)
4705 int hpll_freq, vco_freq[] = { 800, 1600, 2000, 2400 };
4707 /* Obtain SKU information */
4708 mutex_lock(&dev_priv->dpio_lock);
4709 hpll_freq = vlv_cck_read(dev_priv, CCK_FUSE_REG) &
4710 CCK_FUSE_HPLL_FREQ_MASK;
4711 mutex_unlock(&dev_priv->dpio_lock);
4713 return vco_freq[hpll_freq] * 1000;
4716 static void vlv_update_cdclk(struct drm_device *dev)
4718 struct drm_i915_private *dev_priv = dev->dev_private;
4720 dev_priv->vlv_cdclk_freq = dev_priv->display.get_display_clock_speed(dev);
4721 DRM_DEBUG_DRIVER("Current CD clock rate: %d kHz\n",
4722 dev_priv->vlv_cdclk_freq);
4725 * Program the gmbus_freq based on the cdclk frequency.
4726 * BSpec erroneously claims we should aim for 4MHz, but
4727 * in fact 1MHz is the correct frequency.
4729 I915_WRITE(GMBUSFREQ_VLV, dev_priv->vlv_cdclk_freq);
4732 /* Adjust CDclk dividers to allow high res or save power if possible */
4733 static void valleyview_set_cdclk(struct drm_device *dev, int cdclk)
4735 struct drm_i915_private *dev_priv = dev->dev_private;
4738 WARN_ON(dev_priv->display.get_display_clock_speed(dev) != dev_priv->vlv_cdclk_freq);
4740 if (cdclk >= 320000) /* jump to highest voltage for 400MHz too */
4742 else if (cdclk == 266667)
4747 mutex_lock(&dev_priv->rps.hw_lock);
4748 val = vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ);
4749 val &= ~DSPFREQGUAR_MASK;
4750 val |= (cmd << DSPFREQGUAR_SHIFT);
4751 vlv_punit_write(dev_priv, PUNIT_REG_DSPFREQ, val);
4752 if (wait_for((vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ) &
4753 DSPFREQSTAT_MASK) == (cmd << DSPFREQSTAT_SHIFT),
4755 DRM_ERROR("timed out waiting for CDclk change\n");
4757 mutex_unlock(&dev_priv->rps.hw_lock);
4759 if (cdclk == 400000) {
4762 divider = DIV_ROUND_CLOSEST(dev_priv->hpll_freq << 1, cdclk) - 1;
4764 mutex_lock(&dev_priv->dpio_lock);
4765 /* adjust cdclk divider */
4766 val = vlv_cck_read(dev_priv, CCK_DISPLAY_CLOCK_CONTROL);
4767 val &= ~DISPLAY_FREQUENCY_VALUES;
4769 vlv_cck_write(dev_priv, CCK_DISPLAY_CLOCK_CONTROL, val);
4771 if (wait_for((vlv_cck_read(dev_priv, CCK_DISPLAY_CLOCK_CONTROL) &
4772 DISPLAY_FREQUENCY_STATUS) == (divider << DISPLAY_FREQUENCY_STATUS_SHIFT),
4774 DRM_ERROR("timed out waiting for CDclk change\n");
4775 mutex_unlock(&dev_priv->dpio_lock);
4778 mutex_lock(&dev_priv->dpio_lock);
4779 /* adjust self-refresh exit latency value */
4780 val = vlv_bunit_read(dev_priv, BUNIT_REG_BISOC);
4784 * For high bandwidth configs, we set a higher latency in the bunit
4785 * so that the core display fetch happens in time to avoid underruns.
4787 if (cdclk == 400000)
4788 val |= 4500 / 250; /* 4.5 usec */
4790 val |= 3000 / 250; /* 3.0 usec */
4791 vlv_bunit_write(dev_priv, BUNIT_REG_BISOC, val);
4792 mutex_unlock(&dev_priv->dpio_lock);
4794 vlv_update_cdclk(dev);
4797 static void cherryview_set_cdclk(struct drm_device *dev, int cdclk)
4799 struct drm_i915_private *dev_priv = dev->dev_private;
4802 WARN_ON(dev_priv->display.get_display_clock_speed(dev) != dev_priv->vlv_cdclk_freq);
4823 mutex_lock(&dev_priv->rps.hw_lock);
4824 val = vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ);
4825 val &= ~DSPFREQGUAR_MASK_CHV;
4826 val |= (cmd << DSPFREQGUAR_SHIFT_CHV);
4827 vlv_punit_write(dev_priv, PUNIT_REG_DSPFREQ, val);
4828 if (wait_for((vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ) &
4829 DSPFREQSTAT_MASK_CHV) == (cmd << DSPFREQSTAT_SHIFT_CHV),
4831 DRM_ERROR("timed out waiting for CDclk change\n");
4833 mutex_unlock(&dev_priv->rps.hw_lock);
4835 vlv_update_cdclk(dev);
4838 static int valleyview_calc_cdclk(struct drm_i915_private *dev_priv,
4841 int freq_320 = (dev_priv->hpll_freq << 1) % 320000 != 0 ? 333333 : 320000;
4843 /* FIXME: Punit isn't quite ready yet */
4844 if (IS_CHERRYVIEW(dev_priv->dev))
4848 * Really only a few cases to deal with, as only 4 CDclks are supported:
4851 * 320/333MHz (depends on HPLL freq)
4853 * So we check to see whether we're above 90% of the lower bin and
4856 * We seem to get an unstable or solid color picture at 200MHz.
4857 * Not sure what's wrong. For now use 200MHz only when all pipes
4860 if (max_pixclk > freq_320*9/10)
4862 else if (max_pixclk > 266667*9/10)
4864 else if (max_pixclk > 0)
4870 /* compute the max pixel clock for new configuration */
4871 static int intel_mode_max_pixclk(struct drm_i915_private *dev_priv)
4873 struct drm_device *dev = dev_priv->dev;
4874 struct intel_crtc *intel_crtc;
4877 for_each_intel_crtc(dev, intel_crtc) {
4878 if (intel_crtc->new_enabled)
4879 max_pixclk = max(max_pixclk,
4880 intel_crtc->new_config->adjusted_mode.crtc_clock);
4886 static void valleyview_modeset_global_pipes(struct drm_device *dev,
4887 unsigned *prepare_pipes)
4889 struct drm_i915_private *dev_priv = dev->dev_private;
4890 struct intel_crtc *intel_crtc;
4891 int max_pixclk = intel_mode_max_pixclk(dev_priv);
4893 if (valleyview_calc_cdclk(dev_priv, max_pixclk) ==
4894 dev_priv->vlv_cdclk_freq)
4897 /* disable/enable all currently active pipes while we change cdclk */
4898 for_each_intel_crtc(dev, intel_crtc)
4899 if (intel_crtc->base.enabled)
4900 *prepare_pipes |= (1 << intel_crtc->pipe);
4903 static void valleyview_modeset_global_resources(struct drm_device *dev)
4905 struct drm_i915_private *dev_priv = dev->dev_private;
4906 int max_pixclk = intel_mode_max_pixclk(dev_priv);
4907 int req_cdclk = valleyview_calc_cdclk(dev_priv, max_pixclk);
4909 if (req_cdclk != dev_priv->vlv_cdclk_freq) {
4910 if (IS_CHERRYVIEW(dev))
4911 cherryview_set_cdclk(dev, req_cdclk);
4913 valleyview_set_cdclk(dev, req_cdclk);
4917 static void valleyview_crtc_enable(struct drm_crtc *crtc)
4919 struct drm_device *dev = crtc->dev;
4920 struct drm_i915_private *dev_priv = to_i915(dev);
4921 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
4922 struct intel_encoder *encoder;
4923 int pipe = intel_crtc->pipe;
4926 WARN_ON(!crtc->enabled);
4928 if (intel_crtc->active)
4931 is_dsi = intel_pipe_has_type(intel_crtc, INTEL_OUTPUT_DSI);
4934 if (IS_CHERRYVIEW(dev))
4935 chv_prepare_pll(intel_crtc, &intel_crtc->config);
4937 vlv_prepare_pll(intel_crtc, &intel_crtc->config);
4940 if (intel_crtc->config.has_dp_encoder)
4941 intel_dp_set_m_n(intel_crtc);
4943 intel_set_pipe_timings(intel_crtc);
4945 if (IS_CHERRYVIEW(dev) && pipe == PIPE_B) {
4946 struct drm_i915_private *dev_priv = dev->dev_private;
4948 I915_WRITE(CHV_BLEND(pipe), CHV_BLEND_LEGACY);
4949 I915_WRITE(CHV_CANVAS(pipe), 0);
4952 i9xx_set_pipeconf(intel_crtc);
4954 intel_crtc->active = true;
4956 intel_set_cpu_fifo_underrun_reporting(dev_priv, pipe, true);
4958 for_each_encoder_on_crtc(dev, crtc, encoder)
4959 if (encoder->pre_pll_enable)
4960 encoder->pre_pll_enable(encoder);
4963 if (IS_CHERRYVIEW(dev))
4964 chv_enable_pll(intel_crtc, &intel_crtc->config);
4966 vlv_enable_pll(intel_crtc, &intel_crtc->config);
4969 for_each_encoder_on_crtc(dev, crtc, encoder)
4970 if (encoder->pre_enable)
4971 encoder->pre_enable(encoder);
4973 i9xx_pfit_enable(intel_crtc);
4975 intel_crtc_load_lut(crtc);
4977 intel_update_watermarks(crtc);
4978 intel_enable_pipe(intel_crtc);
4980 for_each_encoder_on_crtc(dev, crtc, encoder)
4981 encoder->enable(encoder);
4983 assert_vblank_disabled(crtc);
4984 drm_crtc_vblank_on(crtc);
4986 intel_crtc_enable_planes(crtc);
4988 /* Underruns don't raise interrupts, so check manually. */
4989 i9xx_check_fifo_underruns(dev_priv);
4992 static void i9xx_set_pll_dividers(struct intel_crtc *crtc)
4994 struct drm_device *dev = crtc->base.dev;
4995 struct drm_i915_private *dev_priv = dev->dev_private;
4997 I915_WRITE(FP0(crtc->pipe), crtc->config.dpll_hw_state.fp0);
4998 I915_WRITE(FP1(crtc->pipe), crtc->config.dpll_hw_state.fp1);
5001 static void i9xx_crtc_enable(struct drm_crtc *crtc)
5003 struct drm_device *dev = crtc->dev;
5004 struct drm_i915_private *dev_priv = to_i915(dev);
5005 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
5006 struct intel_encoder *encoder;
5007 int pipe = intel_crtc->pipe;
5009 WARN_ON(!crtc->enabled);
5011 if (intel_crtc->active)
5014 i9xx_set_pll_dividers(intel_crtc);
5016 if (intel_crtc->config.has_dp_encoder)
5017 intel_dp_set_m_n(intel_crtc);
5019 intel_set_pipe_timings(intel_crtc);
5021 i9xx_set_pipeconf(intel_crtc);
5023 intel_crtc->active = true;
5026 intel_set_cpu_fifo_underrun_reporting(dev_priv, pipe, true);
5028 for_each_encoder_on_crtc(dev, crtc, encoder)
5029 if (encoder->pre_enable)
5030 encoder->pre_enable(encoder);
5032 i9xx_enable_pll(intel_crtc);
5034 i9xx_pfit_enable(intel_crtc);
5036 intel_crtc_load_lut(crtc);
5038 intel_update_watermarks(crtc);
5039 intel_enable_pipe(intel_crtc);
5041 for_each_encoder_on_crtc(dev, crtc, encoder)
5042 encoder->enable(encoder);
5044 assert_vblank_disabled(crtc);
5045 drm_crtc_vblank_on(crtc);
5047 intel_crtc_enable_planes(crtc);
5050 * Gen2 reports pipe underruns whenever all planes are disabled.
5051 * So don't enable underrun reporting before at least some planes
5053 * FIXME: Need to fix the logic to work when we turn off all planes
5054 * but leave the pipe running.
5057 intel_set_cpu_fifo_underrun_reporting(dev_priv, pipe, true);
5059 /* Underruns don't raise interrupts, so check manually. */
5060 i9xx_check_fifo_underruns(dev_priv);
5063 static void i9xx_pfit_disable(struct intel_crtc *crtc)
5065 struct drm_device *dev = crtc->base.dev;
5066 struct drm_i915_private *dev_priv = dev->dev_private;
5068 if (!crtc->config.gmch_pfit.control)
5071 assert_pipe_disabled(dev_priv, crtc->pipe);
5073 DRM_DEBUG_DRIVER("disabling pfit, current: 0x%08x\n",
5074 I915_READ(PFIT_CONTROL));
5075 I915_WRITE(PFIT_CONTROL, 0);
5078 static void i9xx_crtc_disable(struct drm_crtc *crtc)
5080 struct drm_device *dev = crtc->dev;
5081 struct drm_i915_private *dev_priv = dev->dev_private;
5082 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
5083 struct intel_encoder *encoder;
5084 int pipe = intel_crtc->pipe;
5086 if (!intel_crtc->active)
5090 * Gen2 reports pipe underruns whenever all planes are disabled.
5091 * So diasble underrun reporting before all the planes get disabled.
5092 * FIXME: Need to fix the logic to work when we turn off all planes
5093 * but leave the pipe running.
5096 intel_set_cpu_fifo_underrun_reporting(dev_priv, pipe, false);
5099 * Vblank time updates from the shadow to live plane control register
5100 * are blocked if the memory self-refresh mode is active at that
5101 * moment. So to make sure the plane gets truly disabled, disable
5102 * first the self-refresh mode. The self-refresh enable bit in turn
5103 * will be checked/applied by the HW only at the next frame start
5104 * event which is after the vblank start event, so we need to have a
5105 * wait-for-vblank between disabling the plane and the pipe.
5107 intel_set_memory_cxsr(dev_priv, false);
5108 intel_crtc_disable_planes(crtc);
5111 * On gen2 planes are double buffered but the pipe isn't, so we must
5112 * wait for planes to fully turn off before disabling the pipe.
5113 * We also need to wait on all gmch platforms because of the
5114 * self-refresh mode constraint explained above.
5116 intel_wait_for_vblank(dev, pipe);
5118 drm_crtc_vblank_off(crtc);
5119 assert_vblank_disabled(crtc);
5121 for_each_encoder_on_crtc(dev, crtc, encoder)
5122 encoder->disable(encoder);
5124 intel_disable_pipe(intel_crtc);
5126 i9xx_pfit_disable(intel_crtc);
5128 for_each_encoder_on_crtc(dev, crtc, encoder)
5129 if (encoder->post_disable)
5130 encoder->post_disable(encoder);
5132 if (!intel_pipe_has_type(intel_crtc, INTEL_OUTPUT_DSI)) {
5133 if (IS_CHERRYVIEW(dev))
5134 chv_disable_pll(dev_priv, pipe);
5135 else if (IS_VALLEYVIEW(dev))
5136 vlv_disable_pll(dev_priv, pipe);
5138 i9xx_disable_pll(intel_crtc);
5142 intel_set_cpu_fifo_underrun_reporting(dev_priv, pipe, false);
5144 intel_crtc->active = false;
5145 intel_update_watermarks(crtc);
5147 mutex_lock(&dev->struct_mutex);
5148 intel_update_fbc(dev);
5149 mutex_unlock(&dev->struct_mutex);
5152 static void i9xx_crtc_off(struct drm_crtc *crtc)
5156 static void intel_crtc_update_sarea(struct drm_crtc *crtc,
5159 struct drm_device *dev = crtc->dev;
5160 struct drm_i915_master_private *master_priv;
5161 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
5162 int pipe = intel_crtc->pipe;
5164 if (!dev->primary->master)
5167 master_priv = dev->primary->master->driver_priv;
5168 if (!master_priv->sarea_priv)
5173 master_priv->sarea_priv->pipeA_w = enabled ? crtc->mode.hdisplay : 0;
5174 master_priv->sarea_priv->pipeA_h = enabled ? crtc->mode.vdisplay : 0;
5177 master_priv->sarea_priv->pipeB_w = enabled ? crtc->mode.hdisplay : 0;
5178 master_priv->sarea_priv->pipeB_h = enabled ? crtc->mode.vdisplay : 0;
5181 DRM_ERROR("Can't update pipe %c in SAREA\n", pipe_name(pipe));
5186 /* Master function to enable/disable CRTC and corresponding power wells */
5187 void intel_crtc_control(struct drm_crtc *crtc, bool enable)
5189 struct drm_device *dev = crtc->dev;
5190 struct drm_i915_private *dev_priv = dev->dev_private;
5191 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
5192 enum intel_display_power_domain domain;
5193 unsigned long domains;
5196 if (!intel_crtc->active) {
5197 domains = get_crtc_power_domains(crtc);
5198 for_each_power_domain(domain, domains)
5199 intel_display_power_get(dev_priv, domain);
5200 intel_crtc->enabled_power_domains = domains;
5202 dev_priv->display.crtc_enable(crtc);
5205 if (intel_crtc->active) {
5206 dev_priv->display.crtc_disable(crtc);
5208 domains = intel_crtc->enabled_power_domains;
5209 for_each_power_domain(domain, domains)
5210 intel_display_power_put(dev_priv, domain);
5211 intel_crtc->enabled_power_domains = 0;
5217 * Sets the power management mode of the pipe and plane.
5219 void intel_crtc_update_dpms(struct drm_crtc *crtc)
5221 struct drm_device *dev = crtc->dev;
5222 struct intel_encoder *intel_encoder;
5223 bool enable = false;
5225 for_each_encoder_on_crtc(dev, crtc, intel_encoder)
5226 enable |= intel_encoder->connectors_active;
5228 intel_crtc_control(crtc, enable);
5230 intel_crtc_update_sarea(crtc, enable);
5233 static void intel_crtc_disable(struct drm_crtc *crtc)
5235 struct drm_device *dev = crtc->dev;
5236 struct drm_connector *connector;
5237 struct drm_i915_private *dev_priv = dev->dev_private;
5238 struct drm_i915_gem_object *old_obj = intel_fb_obj(crtc->primary->fb);
5239 enum pipe pipe = to_intel_crtc(crtc)->pipe;
5241 /* crtc should still be enabled when we disable it. */
5242 WARN_ON(!crtc->enabled);
5244 dev_priv->display.crtc_disable(crtc);
5245 intel_crtc_update_sarea(crtc, false);
5246 dev_priv->display.off(crtc);
5248 if (crtc->primary->fb) {
5249 mutex_lock(&dev->struct_mutex);
5250 intel_unpin_fb_obj(old_obj);
5251 i915_gem_track_fb(old_obj, NULL,
5252 INTEL_FRONTBUFFER_PRIMARY(pipe));
5253 mutex_unlock(&dev->struct_mutex);
5254 crtc->primary->fb = NULL;
5257 /* Update computed state. */
5258 list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
5259 if (!connector->encoder || !connector->encoder->crtc)
5262 if (connector->encoder->crtc != crtc)
5265 connector->dpms = DRM_MODE_DPMS_OFF;
5266 to_intel_encoder(connector->encoder)->connectors_active = false;
5270 void intel_encoder_destroy(struct drm_encoder *encoder)
5272 struct intel_encoder *intel_encoder = to_intel_encoder(encoder);
5274 drm_encoder_cleanup(encoder);
5275 kfree(intel_encoder);
5278 /* Simple dpms helper for encoders with just one connector, no cloning and only
5279 * one kind of off state. It clamps all !ON modes to fully OFF and changes the
5280 * state of the entire output pipe. */
5281 static void intel_encoder_dpms(struct intel_encoder *encoder, int mode)
5283 if (mode == DRM_MODE_DPMS_ON) {
5284 encoder->connectors_active = true;
5286 intel_crtc_update_dpms(encoder->base.crtc);
5288 encoder->connectors_active = false;
5290 intel_crtc_update_dpms(encoder->base.crtc);
5294 /* Cross check the actual hw state with our own modeset state tracking (and it's
5295 * internal consistency). */
5296 static void intel_connector_check_state(struct intel_connector *connector)
5298 if (connector->get_hw_state(connector)) {
5299 struct intel_encoder *encoder = connector->encoder;
5300 struct drm_crtc *crtc;
5301 bool encoder_enabled;
5304 DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n",
5305 connector->base.base.id,
5306 connector->base.name);
5308 /* there is no real hw state for MST connectors */
5309 if (connector->mst_port)
5312 WARN(connector->base.dpms == DRM_MODE_DPMS_OFF,
5313 "wrong connector dpms state\n");
5314 WARN(connector->base.encoder != &encoder->base,
5315 "active connector not linked to encoder\n");
5318 WARN(!encoder->connectors_active,
5319 "encoder->connectors_active not set\n");
5321 encoder_enabled = encoder->get_hw_state(encoder, &pipe);
5322 WARN(!encoder_enabled, "encoder not enabled\n");
5323 if (WARN_ON(!encoder->base.crtc))
5326 crtc = encoder->base.crtc;
5328 WARN(!crtc->enabled, "crtc not enabled\n");
5329 WARN(!to_intel_crtc(crtc)->active, "crtc not active\n");
5330 WARN(pipe != to_intel_crtc(crtc)->pipe,
5331 "encoder active on the wrong pipe\n");
5336 /* Even simpler default implementation, if there's really no special case to
5338 void intel_connector_dpms(struct drm_connector *connector, int mode)
5340 /* All the simple cases only support two dpms states. */
5341 if (mode != DRM_MODE_DPMS_ON)
5342 mode = DRM_MODE_DPMS_OFF;
5344 if (mode == connector->dpms)
5347 connector->dpms = mode;
5349 /* Only need to change hw state when actually enabled */
5350 if (connector->encoder)
5351 intel_encoder_dpms(to_intel_encoder(connector->encoder), mode);
5353 intel_modeset_check_state(connector->dev);
5356 /* Simple connector->get_hw_state implementation for encoders that support only
5357 * one connector and no cloning and hence the encoder state determines the state
5358 * of the connector. */
5359 bool intel_connector_get_hw_state(struct intel_connector *connector)
5362 struct intel_encoder *encoder = connector->encoder;
5364 return encoder->get_hw_state(encoder, &pipe);
5367 static bool ironlake_check_fdi_lanes(struct drm_device *dev, enum pipe pipe,
5368 struct intel_crtc_config *pipe_config)
5370 struct drm_i915_private *dev_priv = dev->dev_private;
5371 struct intel_crtc *pipe_B_crtc =
5372 to_intel_crtc(dev_priv->pipe_to_crtc_mapping[PIPE_B]);
5374 DRM_DEBUG_KMS("checking fdi config on pipe %c, lanes %i\n",
5375 pipe_name(pipe), pipe_config->fdi_lanes);
5376 if (pipe_config->fdi_lanes > 4) {
5377 DRM_DEBUG_KMS("invalid fdi lane config on pipe %c: %i lanes\n",
5378 pipe_name(pipe), pipe_config->fdi_lanes);
5382 if (IS_HASWELL(dev) || IS_BROADWELL(dev)) {
5383 if (pipe_config->fdi_lanes > 2) {
5384 DRM_DEBUG_KMS("only 2 lanes on haswell, required: %i lanes\n",
5385 pipe_config->fdi_lanes);
5392 if (INTEL_INFO(dev)->num_pipes == 2)
5395 /* Ivybridge 3 pipe is really complicated */
5400 if (dev_priv->pipe_to_crtc_mapping[PIPE_C]->enabled &&
5401 pipe_config->fdi_lanes > 2) {
5402 DRM_DEBUG_KMS("invalid shared fdi lane config on pipe %c: %i lanes\n",
5403 pipe_name(pipe), pipe_config->fdi_lanes);
5408 if (!pipe_has_enabled_pch(pipe_B_crtc) ||
5409 pipe_B_crtc->config.fdi_lanes <= 2) {
5410 if (pipe_config->fdi_lanes > 2) {
5411 DRM_DEBUG_KMS("invalid shared fdi lane config on pipe %c: %i lanes\n",
5412 pipe_name(pipe), pipe_config->fdi_lanes);
5416 DRM_DEBUG_KMS("fdi link B uses too many lanes to enable link C\n");
5426 static int ironlake_fdi_compute_config(struct intel_crtc *intel_crtc,
5427 struct intel_crtc_config *pipe_config)
5429 struct drm_device *dev = intel_crtc->base.dev;
5430 struct drm_display_mode *adjusted_mode = &pipe_config->adjusted_mode;
5431 int lane, link_bw, fdi_dotclock;
5432 bool setup_ok, needs_recompute = false;
5435 /* FDI is a binary signal running at ~2.7GHz, encoding
5436 * each output octet as 10 bits. The actual frequency
5437 * is stored as a divider into a 100MHz clock, and the
5438 * mode pixel clock is stored in units of 1KHz.
5439 * Hence the bw of each lane in terms of the mode signal
5442 link_bw = intel_fdi_link_freq(dev) * MHz(100)/KHz(1)/10;
5444 fdi_dotclock = adjusted_mode->crtc_clock;
5446 lane = ironlake_get_lanes_required(fdi_dotclock, link_bw,
5447 pipe_config->pipe_bpp);
5449 pipe_config->fdi_lanes = lane;
5451 intel_link_compute_m_n(pipe_config->pipe_bpp, lane, fdi_dotclock,
5452 link_bw, &pipe_config->fdi_m_n);
5454 setup_ok = ironlake_check_fdi_lanes(intel_crtc->base.dev,
5455 intel_crtc->pipe, pipe_config);
5456 if (!setup_ok && pipe_config->pipe_bpp > 6*3) {
5457 pipe_config->pipe_bpp -= 2*3;
5458 DRM_DEBUG_KMS("fdi link bw constraint, reducing pipe bpp to %i\n",
5459 pipe_config->pipe_bpp);
5460 needs_recompute = true;
5461 pipe_config->bw_constrained = true;
5466 if (needs_recompute)
5469 return setup_ok ? 0 : -EINVAL;
5472 static void hsw_compute_ips_config(struct intel_crtc *crtc,
5473 struct intel_crtc_config *pipe_config)
5475 pipe_config->ips_enabled = i915.enable_ips &&
5476 hsw_crtc_supports_ips(crtc) &&
5477 pipe_config->pipe_bpp <= 24;
5480 static int intel_crtc_compute_config(struct intel_crtc *crtc,
5481 struct intel_crtc_config *pipe_config)
5483 struct drm_device *dev = crtc->base.dev;
5484 struct drm_i915_private *dev_priv = dev->dev_private;
5485 struct drm_display_mode *adjusted_mode = &pipe_config->adjusted_mode;
5487 /* FIXME should check pixel clock limits on all platforms */
5488 if (INTEL_INFO(dev)->gen < 4) {
5490 dev_priv->display.get_display_clock_speed(dev);
5493 * Enable pixel doubling when the dot clock
5494 * is > 90% of the (display) core speed.
5496 * GDG double wide on either pipe,
5497 * otherwise pipe A only.
5499 if ((crtc->pipe == PIPE_A || IS_I915G(dev)) &&
5500 adjusted_mode->crtc_clock > clock_limit * 9 / 10) {
5502 pipe_config->double_wide = true;
5505 if (adjusted_mode->crtc_clock > clock_limit * 9 / 10)
5510 * Pipe horizontal size must be even in:
5512 * - LVDS dual channel mode
5513 * - Double wide pipe
5515 if ((intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) &&
5516 intel_is_dual_link_lvds(dev)) || pipe_config->double_wide)
5517 pipe_config->pipe_src_w &= ~1;
5519 /* Cantiga+ cannot handle modes with a hsync front porch of 0.
5520 * WaPruneModeWithIncorrectHsyncOffset:ctg,elk,ilk,snb,ivb,vlv,hsw.
5522 if ((INTEL_INFO(dev)->gen > 4 || IS_G4X(dev)) &&
5523 adjusted_mode->hsync_start == adjusted_mode->hdisplay)
5526 if ((IS_G4X(dev) || IS_VALLEYVIEW(dev)) && pipe_config->pipe_bpp > 10*3) {
5527 pipe_config->pipe_bpp = 10*3; /* 12bpc is gen5+ */
5528 } else if (INTEL_INFO(dev)->gen <= 4 && pipe_config->pipe_bpp > 8*3) {
5529 /* only a 8bpc pipe, with 6bpc dither through the panel fitter
5531 pipe_config->pipe_bpp = 8*3;
5535 hsw_compute_ips_config(crtc, pipe_config);
5537 if (pipe_config->has_pch_encoder)
5538 return ironlake_fdi_compute_config(crtc, pipe_config);
5543 static int valleyview_get_display_clock_speed(struct drm_device *dev)
5545 struct drm_i915_private *dev_priv = dev->dev_private;
5549 /* FIXME: Punit isn't quite ready yet */
5550 if (IS_CHERRYVIEW(dev))
5553 if (dev_priv->hpll_freq == 0)
5554 dev_priv->hpll_freq = valleyview_get_vco(dev_priv);
5556 mutex_lock(&dev_priv->dpio_lock);
5557 val = vlv_cck_read(dev_priv, CCK_DISPLAY_CLOCK_CONTROL);
5558 mutex_unlock(&dev_priv->dpio_lock);
5560 divider = val & DISPLAY_FREQUENCY_VALUES;
5562 WARN((val & DISPLAY_FREQUENCY_STATUS) !=
5563 (divider << DISPLAY_FREQUENCY_STATUS_SHIFT),
5564 "cdclk change in progress\n");
5566 return DIV_ROUND_CLOSEST(dev_priv->hpll_freq << 1, divider + 1);
5569 static int i945_get_display_clock_speed(struct drm_device *dev)
5574 static int i915_get_display_clock_speed(struct drm_device *dev)
5579 static int i9xx_misc_get_display_clock_speed(struct drm_device *dev)
5584 static int pnv_get_display_clock_speed(struct drm_device *dev)
5588 pci_read_config_word(dev->pdev, GCFGC, &gcfgc);
5590 switch (gcfgc & GC_DISPLAY_CLOCK_MASK) {
5591 case GC_DISPLAY_CLOCK_267_MHZ_PNV:
5593 case GC_DISPLAY_CLOCK_333_MHZ_PNV:
5595 case GC_DISPLAY_CLOCK_444_MHZ_PNV:
5597 case GC_DISPLAY_CLOCK_200_MHZ_PNV:
5600 DRM_ERROR("Unknown pnv display core clock 0x%04x\n", gcfgc);
5601 case GC_DISPLAY_CLOCK_133_MHZ_PNV:
5603 case GC_DISPLAY_CLOCK_167_MHZ_PNV:
5608 static int i915gm_get_display_clock_speed(struct drm_device *dev)
5612 pci_read_config_word(dev->pdev, GCFGC, &gcfgc);
5614 if (gcfgc & GC_LOW_FREQUENCY_ENABLE)
5617 switch (gcfgc & GC_DISPLAY_CLOCK_MASK) {
5618 case GC_DISPLAY_CLOCK_333_MHZ:
5621 case GC_DISPLAY_CLOCK_190_200_MHZ:
5627 static int i865_get_display_clock_speed(struct drm_device *dev)
5632 static int i855_get_display_clock_speed(struct drm_device *dev)
5635 /* Assume that the hardware is in the high speed state. This
5636 * should be the default.
5638 switch (hpllcc & GC_CLOCK_CONTROL_MASK) {
5639 case GC_CLOCK_133_200:
5640 case GC_CLOCK_100_200:
5642 case GC_CLOCK_166_250:
5644 case GC_CLOCK_100_133:
5648 /* Shouldn't happen */
5652 static int i830_get_display_clock_speed(struct drm_device *dev)
5658 intel_reduce_m_n_ratio(uint32_t *num, uint32_t *den)
5660 while (*num > DATA_LINK_M_N_MASK ||
5661 *den > DATA_LINK_M_N_MASK) {
5667 static void compute_m_n(unsigned int m, unsigned int n,
5668 uint32_t *ret_m, uint32_t *ret_n)
5670 *ret_n = min_t(unsigned int, roundup_pow_of_two(n), DATA_LINK_N_MAX);
5671 *ret_m = div_u64((uint64_t) m * *ret_n, n);
5672 intel_reduce_m_n_ratio(ret_m, ret_n);
5676 intel_link_compute_m_n(int bits_per_pixel, int nlanes,
5677 int pixel_clock, int link_clock,
5678 struct intel_link_m_n *m_n)
5682 compute_m_n(bits_per_pixel * pixel_clock,
5683 link_clock * nlanes * 8,
5684 &m_n->gmch_m, &m_n->gmch_n);
5686 compute_m_n(pixel_clock, link_clock,
5687 &m_n->link_m, &m_n->link_n);
5690 static inline bool intel_panel_use_ssc(struct drm_i915_private *dev_priv)
5692 if (i915.panel_use_ssc >= 0)
5693 return i915.panel_use_ssc != 0;
5694 return dev_priv->vbt.lvds_use_ssc
5695 && !(dev_priv->quirks & QUIRK_LVDS_SSC_DISABLE);
5698 static int i9xx_get_refclk(struct intel_crtc *crtc, int num_connectors)
5700 struct drm_device *dev = crtc->base.dev;
5701 struct drm_i915_private *dev_priv = dev->dev_private;
5704 if (IS_VALLEYVIEW(dev)) {
5706 } else if (intel_pipe_will_have_type(crtc, INTEL_OUTPUT_LVDS) &&
5707 intel_panel_use_ssc(dev_priv) && num_connectors < 2) {
5708 refclk = dev_priv->vbt.lvds_ssc_freq;
5709 DRM_DEBUG_KMS("using SSC reference clock of %d kHz\n", refclk);
5710 } else if (!IS_GEN2(dev)) {
5719 static uint32_t pnv_dpll_compute_fp(struct dpll *dpll)
5721 return (1 << dpll->n) << 16 | dpll->m2;
5724 static uint32_t i9xx_dpll_compute_fp(struct dpll *dpll)
5726 return dpll->n << 16 | dpll->m1 << 8 | dpll->m2;
5729 static void i9xx_update_pll_dividers(struct intel_crtc *crtc,
5730 intel_clock_t *reduced_clock)
5732 struct drm_device *dev = crtc->base.dev;
5735 if (IS_PINEVIEW(dev)) {
5736 fp = pnv_dpll_compute_fp(&crtc->new_config->dpll);
5738 fp2 = pnv_dpll_compute_fp(reduced_clock);
5740 fp = i9xx_dpll_compute_fp(&crtc->new_config->dpll);
5742 fp2 = i9xx_dpll_compute_fp(reduced_clock);
5745 crtc->new_config->dpll_hw_state.fp0 = fp;
5747 crtc->lowfreq_avail = false;
5748 if (intel_pipe_will_have_type(crtc, INTEL_OUTPUT_LVDS) &&
5749 reduced_clock && i915.powersave) {
5750 crtc->new_config->dpll_hw_state.fp1 = fp2;
5751 crtc->lowfreq_avail = true;
5753 crtc->new_config->dpll_hw_state.fp1 = fp;
5757 static void vlv_pllb_recal_opamp(struct drm_i915_private *dev_priv, enum pipe
5763 * PLLB opamp always calibrates to max value of 0x3f, force enable it
5764 * and set it to a reasonable value instead.
5766 reg_val = vlv_dpio_read(dev_priv, pipe, VLV_PLL_DW9(1));
5767 reg_val &= 0xffffff00;
5768 reg_val |= 0x00000030;
5769 vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW9(1), reg_val);
5771 reg_val = vlv_dpio_read(dev_priv, pipe, VLV_REF_DW13);
5772 reg_val &= 0x8cffffff;
5773 reg_val = 0x8c000000;
5774 vlv_dpio_write(dev_priv, pipe, VLV_REF_DW13, reg_val);
5776 reg_val = vlv_dpio_read(dev_priv, pipe, VLV_PLL_DW9(1));
5777 reg_val &= 0xffffff00;
5778 vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW9(1), reg_val);
5780 reg_val = vlv_dpio_read(dev_priv, pipe, VLV_REF_DW13);
5781 reg_val &= 0x00ffffff;
5782 reg_val |= 0xb0000000;
5783 vlv_dpio_write(dev_priv, pipe, VLV_REF_DW13, reg_val);
5786 static void intel_pch_transcoder_set_m_n(struct intel_crtc *crtc,
5787 struct intel_link_m_n *m_n)
5789 struct drm_device *dev = crtc->base.dev;
5790 struct drm_i915_private *dev_priv = dev->dev_private;
5791 int pipe = crtc->pipe;
5793 I915_WRITE(PCH_TRANS_DATA_M1(pipe), TU_SIZE(m_n->tu) | m_n->gmch_m);
5794 I915_WRITE(PCH_TRANS_DATA_N1(pipe), m_n->gmch_n);
5795 I915_WRITE(PCH_TRANS_LINK_M1(pipe), m_n->link_m);
5796 I915_WRITE(PCH_TRANS_LINK_N1(pipe), m_n->link_n);
5799 static void intel_cpu_transcoder_set_m_n(struct intel_crtc *crtc,
5800 struct intel_link_m_n *m_n,
5801 struct intel_link_m_n *m2_n2)
5803 struct drm_device *dev = crtc->base.dev;
5804 struct drm_i915_private *dev_priv = dev->dev_private;
5805 int pipe = crtc->pipe;
5806 enum transcoder transcoder = crtc->config.cpu_transcoder;
5808 if (INTEL_INFO(dev)->gen >= 5) {
5809 I915_WRITE(PIPE_DATA_M1(transcoder), TU_SIZE(m_n->tu) | m_n->gmch_m);
5810 I915_WRITE(PIPE_DATA_N1(transcoder), m_n->gmch_n);
5811 I915_WRITE(PIPE_LINK_M1(transcoder), m_n->link_m);
5812 I915_WRITE(PIPE_LINK_N1(transcoder), m_n->link_n);
5813 /* M2_N2 registers to be set only for gen < 8 (M2_N2 available
5814 * for gen < 8) and if DRRS is supported (to make sure the
5815 * registers are not unnecessarily accessed).
5817 if (m2_n2 && INTEL_INFO(dev)->gen < 8 &&
5818 crtc->config.has_drrs) {
5819 I915_WRITE(PIPE_DATA_M2(transcoder),
5820 TU_SIZE(m2_n2->tu) | m2_n2->gmch_m);
5821 I915_WRITE(PIPE_DATA_N2(transcoder), m2_n2->gmch_n);
5822 I915_WRITE(PIPE_LINK_M2(transcoder), m2_n2->link_m);
5823 I915_WRITE(PIPE_LINK_N2(transcoder), m2_n2->link_n);
5826 I915_WRITE(PIPE_DATA_M_G4X(pipe), TU_SIZE(m_n->tu) | m_n->gmch_m);
5827 I915_WRITE(PIPE_DATA_N_G4X(pipe), m_n->gmch_n);
5828 I915_WRITE(PIPE_LINK_M_G4X(pipe), m_n->link_m);
5829 I915_WRITE(PIPE_LINK_N_G4X(pipe), m_n->link_n);
5833 void intel_dp_set_m_n(struct intel_crtc *crtc)
5835 if (crtc->config.has_pch_encoder)
5836 intel_pch_transcoder_set_m_n(crtc, &crtc->config.dp_m_n);
5838 intel_cpu_transcoder_set_m_n(crtc, &crtc->config.dp_m_n,
5839 &crtc->config.dp_m2_n2);
5842 static void vlv_update_pll(struct intel_crtc *crtc,
5843 struct intel_crtc_config *pipe_config)
5848 * Enable DPIO clock input. We should never disable the reference
5849 * clock for pipe B, since VGA hotplug / manual detection depends
5852 dpll = DPLL_EXT_BUFFER_ENABLE_VLV | DPLL_REFA_CLK_ENABLE_VLV |
5853 DPLL_VGA_MODE_DIS | DPLL_INTEGRATED_CLOCK_VLV;
5854 /* We should never disable this, set it here for state tracking */
5855 if (crtc->pipe == PIPE_B)
5856 dpll |= DPLL_INTEGRATED_CRI_CLK_VLV;
5857 dpll |= DPLL_VCO_ENABLE;
5858 pipe_config->dpll_hw_state.dpll = dpll;
5860 dpll_md = (pipe_config->pixel_multiplier - 1)
5861 << DPLL_MD_UDI_MULTIPLIER_SHIFT;
5862 pipe_config->dpll_hw_state.dpll_md = dpll_md;
5865 static void vlv_prepare_pll(struct intel_crtc *crtc,
5866 const struct intel_crtc_config *pipe_config)
5868 struct drm_device *dev = crtc->base.dev;
5869 struct drm_i915_private *dev_priv = dev->dev_private;
5870 int pipe = crtc->pipe;
5872 u32 bestn, bestm1, bestm2, bestp1, bestp2;
5873 u32 coreclk, reg_val;
5875 mutex_lock(&dev_priv->dpio_lock);
5877 bestn = pipe_config->dpll.n;
5878 bestm1 = pipe_config->dpll.m1;
5879 bestm2 = pipe_config->dpll.m2;
5880 bestp1 = pipe_config->dpll.p1;
5881 bestp2 = pipe_config->dpll.p2;
5883 /* See eDP HDMI DPIO driver vbios notes doc */
5885 /* PLL B needs special handling */
5887 vlv_pllb_recal_opamp(dev_priv, pipe);
5889 /* Set up Tx target for periodic Rcomp update */
5890 vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW9_BCAST, 0x0100000f);
5892 /* Disable target IRef on PLL */
5893 reg_val = vlv_dpio_read(dev_priv, pipe, VLV_PLL_DW8(pipe));
5894 reg_val &= 0x00ffffff;
5895 vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW8(pipe), reg_val);
5897 /* Disable fast lock */
5898 vlv_dpio_write(dev_priv, pipe, VLV_CMN_DW0, 0x610);
5900 /* Set idtafcrecal before PLL is enabled */
5901 mdiv = ((bestm1 << DPIO_M1DIV_SHIFT) | (bestm2 & DPIO_M2DIV_MASK));
5902 mdiv |= ((bestp1 << DPIO_P1_SHIFT) | (bestp2 << DPIO_P2_SHIFT));
5903 mdiv |= ((bestn << DPIO_N_SHIFT));
5904 mdiv |= (1 << DPIO_K_SHIFT);
5907 * Post divider depends on pixel clock rate, DAC vs digital (and LVDS,
5908 * but we don't support that).
5909 * Note: don't use the DAC post divider as it seems unstable.
5911 mdiv |= (DPIO_POST_DIV_HDMIDP << DPIO_POST_DIV_SHIFT);
5912 vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW3(pipe), mdiv);
5914 mdiv |= DPIO_ENABLE_CALIBRATION;
5915 vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW3(pipe), mdiv);
5917 /* Set HBR and RBR LPF coefficients */
5918 if (pipe_config->port_clock == 162000 ||
5919 intel_pipe_has_type(crtc, INTEL_OUTPUT_ANALOG) ||
5920 intel_pipe_has_type(crtc, INTEL_OUTPUT_HDMI))
5921 vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW10(pipe),
5924 vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW10(pipe),
5927 if (crtc->config.has_dp_encoder) {
5928 /* Use SSC source */
5930 vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW5(pipe),
5933 vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW5(pipe),
5935 } else { /* HDMI or VGA */
5936 /* Use bend source */
5938 vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW5(pipe),
5941 vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW5(pipe),
5945 coreclk = vlv_dpio_read(dev_priv, pipe, VLV_PLL_DW7(pipe));
5946 coreclk = (coreclk & 0x0000ff00) | 0x01c00000;
5947 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT) ||
5948 intel_pipe_has_type(crtc, INTEL_OUTPUT_EDP))
5949 coreclk |= 0x01000000;
5950 vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW7(pipe), coreclk);
5952 vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW11(pipe), 0x87871000);
5953 mutex_unlock(&dev_priv->dpio_lock);
5956 static void chv_update_pll(struct intel_crtc *crtc,
5957 struct intel_crtc_config *pipe_config)
5959 pipe_config->dpll_hw_state.dpll = DPLL_SSC_REF_CLOCK_CHV |
5960 DPLL_REFA_CLK_ENABLE_VLV | DPLL_VGA_MODE_DIS |
5962 if (crtc->pipe != PIPE_A)
5963 pipe_config->dpll_hw_state.dpll |= DPLL_INTEGRATED_CRI_CLK_VLV;
5965 pipe_config->dpll_hw_state.dpll_md =
5966 (pipe_config->pixel_multiplier - 1) << DPLL_MD_UDI_MULTIPLIER_SHIFT;
5969 static void chv_prepare_pll(struct intel_crtc *crtc,
5970 const struct intel_crtc_config *pipe_config)
5972 struct drm_device *dev = crtc->base.dev;
5973 struct drm_i915_private *dev_priv = dev->dev_private;
5974 int pipe = crtc->pipe;
5975 int dpll_reg = DPLL(crtc->pipe);
5976 enum dpio_channel port = vlv_pipe_to_channel(pipe);
5977 u32 loopfilter, intcoeff;
5978 u32 bestn, bestm1, bestm2, bestp1, bestp2, bestm2_frac;
5981 bestn = pipe_config->dpll.n;
5982 bestm2_frac = pipe_config->dpll.m2 & 0x3fffff;
5983 bestm1 = pipe_config->dpll.m1;
5984 bestm2 = pipe_config->dpll.m2 >> 22;
5985 bestp1 = pipe_config->dpll.p1;
5986 bestp2 = pipe_config->dpll.p2;
5989 * Enable Refclk and SSC
5991 I915_WRITE(dpll_reg,
5992 pipe_config->dpll_hw_state.dpll & ~DPLL_VCO_ENABLE);
5994 mutex_lock(&dev_priv->dpio_lock);
5996 /* p1 and p2 divider */
5997 vlv_dpio_write(dev_priv, pipe, CHV_CMN_DW13(port),
5998 5 << DPIO_CHV_S1_DIV_SHIFT |
5999 bestp1 << DPIO_CHV_P1_DIV_SHIFT |
6000 bestp2 << DPIO_CHV_P2_DIV_SHIFT |
6001 1 << DPIO_CHV_K_DIV_SHIFT);
6003 /* Feedback post-divider - m2 */
6004 vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW0(port), bestm2);
6006 /* Feedback refclk divider - n and m1 */
6007 vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW1(port),
6008 DPIO_CHV_M1_DIV_BY_2 |
6009 1 << DPIO_CHV_N_DIV_SHIFT);
6011 /* M2 fraction division */
6012 vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW2(port), bestm2_frac);
6014 /* M2 fraction division enable */
6015 vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW3(port),
6016 DPIO_CHV_FRAC_DIV_EN |
6017 (2 << DPIO_CHV_FEEDFWD_GAIN_SHIFT));
6020 refclk = i9xx_get_refclk(crtc, 0);
6021 loopfilter = 5 << DPIO_CHV_PROP_COEFF_SHIFT |
6022 2 << DPIO_CHV_GAIN_CTRL_SHIFT;
6023 if (refclk == 100000)
6025 else if (refclk == 38400)
6029 loopfilter |= intcoeff << DPIO_CHV_INT_COEFF_SHIFT;
6030 vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW6(port), loopfilter);
6033 vlv_dpio_write(dev_priv, pipe, CHV_CMN_DW14(port),
6034 vlv_dpio_read(dev_priv, pipe, CHV_CMN_DW14(port)) |
6037 mutex_unlock(&dev_priv->dpio_lock);
6041 * vlv_force_pll_on - forcibly enable just the PLL
6042 * @dev_priv: i915 private structure
6043 * @pipe: pipe PLL to enable
6044 * @dpll: PLL configuration
6046 * Enable the PLL for @pipe using the supplied @dpll config. To be used
6047 * in cases where we need the PLL enabled even when @pipe is not going to
6050 void vlv_force_pll_on(struct drm_device *dev, enum pipe pipe,
6051 const struct dpll *dpll)
6053 struct intel_crtc *crtc =
6054 to_intel_crtc(intel_get_crtc_for_pipe(dev, pipe));
6055 struct intel_crtc_config pipe_config = {
6056 .pixel_multiplier = 1,
6060 if (IS_CHERRYVIEW(dev)) {
6061 chv_update_pll(crtc, &pipe_config);
6062 chv_prepare_pll(crtc, &pipe_config);
6063 chv_enable_pll(crtc, &pipe_config);
6065 vlv_update_pll(crtc, &pipe_config);
6066 vlv_prepare_pll(crtc, &pipe_config);
6067 vlv_enable_pll(crtc, &pipe_config);
6072 * vlv_force_pll_off - forcibly disable just the PLL
6073 * @dev_priv: i915 private structure
6074 * @pipe: pipe PLL to disable
6076 * Disable the PLL for @pipe. To be used in cases where we need
6077 * the PLL enabled even when @pipe is not going to be enabled.
6079 void vlv_force_pll_off(struct drm_device *dev, enum pipe pipe)
6081 if (IS_CHERRYVIEW(dev))
6082 chv_disable_pll(to_i915(dev), pipe);
6084 vlv_disable_pll(to_i915(dev), pipe);
6087 static void i9xx_update_pll(struct intel_crtc *crtc,
6088 intel_clock_t *reduced_clock,
6091 struct drm_device *dev = crtc->base.dev;
6092 struct drm_i915_private *dev_priv = dev->dev_private;
6095 struct dpll *clock = &crtc->new_config->dpll;
6097 i9xx_update_pll_dividers(crtc, reduced_clock);
6099 is_sdvo = intel_pipe_will_have_type(crtc, INTEL_OUTPUT_SDVO) ||
6100 intel_pipe_will_have_type(crtc, INTEL_OUTPUT_HDMI);
6102 dpll = DPLL_VGA_MODE_DIS;
6104 if (intel_pipe_will_have_type(crtc, INTEL_OUTPUT_LVDS))
6105 dpll |= DPLLB_MODE_LVDS;
6107 dpll |= DPLLB_MODE_DAC_SERIAL;
6109 if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev)) {
6110 dpll |= (crtc->new_config->pixel_multiplier - 1)
6111 << SDVO_MULTIPLIER_SHIFT_HIRES;
6115 dpll |= DPLL_SDVO_HIGH_SPEED;
6117 if (crtc->new_config->has_dp_encoder)
6118 dpll |= DPLL_SDVO_HIGH_SPEED;
6120 /* compute bitmask from p1 value */
6121 if (IS_PINEVIEW(dev))
6122 dpll |= (1 << (clock->p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT_PINEVIEW;
6124 dpll |= (1 << (clock->p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT;
6125 if (IS_G4X(dev) && reduced_clock)
6126 dpll |= (1 << (reduced_clock->p1 - 1)) << DPLL_FPA1_P1_POST_DIV_SHIFT;
6128 switch (clock->p2) {
6130 dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_5;
6133 dpll |= DPLLB_LVDS_P2_CLOCK_DIV_7;
6136 dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_10;
6139 dpll |= DPLLB_LVDS_P2_CLOCK_DIV_14;
6142 if (INTEL_INFO(dev)->gen >= 4)
6143 dpll |= (6 << PLL_LOAD_PULSE_PHASE_SHIFT);
6145 if (crtc->new_config->sdvo_tv_clock)
6146 dpll |= PLL_REF_INPUT_TVCLKINBC;
6147 else if (intel_pipe_will_have_type(crtc, INTEL_OUTPUT_LVDS) &&
6148 intel_panel_use_ssc(dev_priv) && num_connectors < 2)
6149 dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN;
6151 dpll |= PLL_REF_INPUT_DREFCLK;
6153 dpll |= DPLL_VCO_ENABLE;
6154 crtc->new_config->dpll_hw_state.dpll = dpll;
6156 if (INTEL_INFO(dev)->gen >= 4) {
6157 u32 dpll_md = (crtc->new_config->pixel_multiplier - 1)
6158 << DPLL_MD_UDI_MULTIPLIER_SHIFT;
6159 crtc->new_config->dpll_hw_state.dpll_md = dpll_md;
6163 static void i8xx_update_pll(struct intel_crtc *crtc,
6164 intel_clock_t *reduced_clock,
6167 struct drm_device *dev = crtc->base.dev;
6168 struct drm_i915_private *dev_priv = dev->dev_private;
6170 struct dpll *clock = &crtc->new_config->dpll;
6172 i9xx_update_pll_dividers(crtc, reduced_clock);
6174 dpll = DPLL_VGA_MODE_DIS;
6176 if (intel_pipe_will_have_type(crtc, INTEL_OUTPUT_LVDS)) {
6177 dpll |= (1 << (clock->p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT;
6180 dpll |= PLL_P1_DIVIDE_BY_TWO;
6182 dpll |= (clock->p1 - 2) << DPLL_FPA01_P1_POST_DIV_SHIFT;
6184 dpll |= PLL_P2_DIVIDE_BY_4;
6187 if (!IS_I830(dev) && intel_pipe_will_have_type(crtc, INTEL_OUTPUT_DVO))
6188 dpll |= DPLL_DVO_2X_MODE;
6190 if (intel_pipe_will_have_type(crtc, INTEL_OUTPUT_LVDS) &&
6191 intel_panel_use_ssc(dev_priv) && num_connectors < 2)
6192 dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN;
6194 dpll |= PLL_REF_INPUT_DREFCLK;
6196 dpll |= DPLL_VCO_ENABLE;
6197 crtc->new_config->dpll_hw_state.dpll = dpll;
6200 static void intel_set_pipe_timings(struct intel_crtc *intel_crtc)
6202 struct drm_device *dev = intel_crtc->base.dev;
6203 struct drm_i915_private *dev_priv = dev->dev_private;
6204 enum pipe pipe = intel_crtc->pipe;
6205 enum transcoder cpu_transcoder = intel_crtc->config.cpu_transcoder;
6206 struct drm_display_mode *adjusted_mode =
6207 &intel_crtc->config.adjusted_mode;
6208 uint32_t crtc_vtotal, crtc_vblank_end;
6211 /* We need to be careful not to changed the adjusted mode, for otherwise
6212 * the hw state checker will get angry at the mismatch. */
6213 crtc_vtotal = adjusted_mode->crtc_vtotal;
6214 crtc_vblank_end = adjusted_mode->crtc_vblank_end;
6216 if (adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE) {
6217 /* the chip adds 2 halflines automatically */
6219 crtc_vblank_end -= 1;
6221 if (intel_pipe_has_type(intel_crtc, INTEL_OUTPUT_SDVO))
6222 vsyncshift = (adjusted_mode->crtc_htotal - 1) / 2;
6224 vsyncshift = adjusted_mode->crtc_hsync_start -
6225 adjusted_mode->crtc_htotal / 2;
6227 vsyncshift += adjusted_mode->crtc_htotal;
6230 if (INTEL_INFO(dev)->gen > 3)
6231 I915_WRITE(VSYNCSHIFT(cpu_transcoder), vsyncshift);
6233 I915_WRITE(HTOTAL(cpu_transcoder),
6234 (adjusted_mode->crtc_hdisplay - 1) |
6235 ((adjusted_mode->crtc_htotal - 1) << 16));
6236 I915_WRITE(HBLANK(cpu_transcoder),
6237 (adjusted_mode->crtc_hblank_start - 1) |
6238 ((adjusted_mode->crtc_hblank_end - 1) << 16));
6239 I915_WRITE(HSYNC(cpu_transcoder),
6240 (adjusted_mode->crtc_hsync_start - 1) |
6241 ((adjusted_mode->crtc_hsync_end - 1) << 16));
6243 I915_WRITE(VTOTAL(cpu_transcoder),
6244 (adjusted_mode->crtc_vdisplay - 1) |
6245 ((crtc_vtotal - 1) << 16));
6246 I915_WRITE(VBLANK(cpu_transcoder),
6247 (adjusted_mode->crtc_vblank_start - 1) |
6248 ((crtc_vblank_end - 1) << 16));
6249 I915_WRITE(VSYNC(cpu_transcoder),
6250 (adjusted_mode->crtc_vsync_start - 1) |
6251 ((adjusted_mode->crtc_vsync_end - 1) << 16));
6253 /* Workaround: when the EDP input selection is B, the VTOTAL_B must be
6254 * programmed with the VTOTAL_EDP value. Same for VTOTAL_C. This is
6255 * documented on the DDI_FUNC_CTL register description, EDP Input Select
6257 if (IS_HASWELL(dev) && cpu_transcoder == TRANSCODER_EDP &&
6258 (pipe == PIPE_B || pipe == PIPE_C))
6259 I915_WRITE(VTOTAL(pipe), I915_READ(VTOTAL(cpu_transcoder)));
6261 /* pipesrc controls the size that is scaled from, which should
6262 * always be the user's requested size.
6264 I915_WRITE(PIPESRC(pipe),
6265 ((intel_crtc->config.pipe_src_w - 1) << 16) |
6266 (intel_crtc->config.pipe_src_h - 1));
6269 static void intel_get_pipe_timings(struct intel_crtc *crtc,
6270 struct intel_crtc_config *pipe_config)
6272 struct drm_device *dev = crtc->base.dev;
6273 struct drm_i915_private *dev_priv = dev->dev_private;
6274 enum transcoder cpu_transcoder = pipe_config->cpu_transcoder;
6277 tmp = I915_READ(HTOTAL(cpu_transcoder));
6278 pipe_config->adjusted_mode.crtc_hdisplay = (tmp & 0xffff) + 1;
6279 pipe_config->adjusted_mode.crtc_htotal = ((tmp >> 16) & 0xffff) + 1;
6280 tmp = I915_READ(HBLANK(cpu_transcoder));
6281 pipe_config->adjusted_mode.crtc_hblank_start = (tmp & 0xffff) + 1;
6282 pipe_config->adjusted_mode.crtc_hblank_end = ((tmp >> 16) & 0xffff) + 1;
6283 tmp = I915_READ(HSYNC(cpu_transcoder));
6284 pipe_config->adjusted_mode.crtc_hsync_start = (tmp & 0xffff) + 1;
6285 pipe_config->adjusted_mode.crtc_hsync_end = ((tmp >> 16) & 0xffff) + 1;
6287 tmp = I915_READ(VTOTAL(cpu_transcoder));
6288 pipe_config->adjusted_mode.crtc_vdisplay = (tmp & 0xffff) + 1;
6289 pipe_config->adjusted_mode.crtc_vtotal = ((tmp >> 16) & 0xffff) + 1;
6290 tmp = I915_READ(VBLANK(cpu_transcoder));
6291 pipe_config->adjusted_mode.crtc_vblank_start = (tmp & 0xffff) + 1;
6292 pipe_config->adjusted_mode.crtc_vblank_end = ((tmp >> 16) & 0xffff) + 1;
6293 tmp = I915_READ(VSYNC(cpu_transcoder));
6294 pipe_config->adjusted_mode.crtc_vsync_start = (tmp & 0xffff) + 1;
6295 pipe_config->adjusted_mode.crtc_vsync_end = ((tmp >> 16) & 0xffff) + 1;
6297 if (I915_READ(PIPECONF(cpu_transcoder)) & PIPECONF_INTERLACE_MASK) {
6298 pipe_config->adjusted_mode.flags |= DRM_MODE_FLAG_INTERLACE;
6299 pipe_config->adjusted_mode.crtc_vtotal += 1;
6300 pipe_config->adjusted_mode.crtc_vblank_end += 1;
6303 tmp = I915_READ(PIPESRC(crtc->pipe));
6304 pipe_config->pipe_src_h = (tmp & 0xffff) + 1;
6305 pipe_config->pipe_src_w = ((tmp >> 16) & 0xffff) + 1;
6307 pipe_config->requested_mode.vdisplay = pipe_config->pipe_src_h;
6308 pipe_config->requested_mode.hdisplay = pipe_config->pipe_src_w;
6311 void intel_mode_from_pipe_config(struct drm_display_mode *mode,
6312 struct intel_crtc_config *pipe_config)
6314 mode->hdisplay = pipe_config->adjusted_mode.crtc_hdisplay;
6315 mode->htotal = pipe_config->adjusted_mode.crtc_htotal;
6316 mode->hsync_start = pipe_config->adjusted_mode.crtc_hsync_start;
6317 mode->hsync_end = pipe_config->adjusted_mode.crtc_hsync_end;
6319 mode->vdisplay = pipe_config->adjusted_mode.crtc_vdisplay;
6320 mode->vtotal = pipe_config->adjusted_mode.crtc_vtotal;
6321 mode->vsync_start = pipe_config->adjusted_mode.crtc_vsync_start;
6322 mode->vsync_end = pipe_config->adjusted_mode.crtc_vsync_end;
6324 mode->flags = pipe_config->adjusted_mode.flags;
6326 mode->clock = pipe_config->adjusted_mode.crtc_clock;
6327 mode->flags |= pipe_config->adjusted_mode.flags;
6330 static void i9xx_set_pipeconf(struct intel_crtc *intel_crtc)
6332 struct drm_device *dev = intel_crtc->base.dev;
6333 struct drm_i915_private *dev_priv = dev->dev_private;
6338 if ((intel_crtc->pipe == PIPE_A && dev_priv->quirks & QUIRK_PIPEA_FORCE) ||
6339 (intel_crtc->pipe == PIPE_B && dev_priv->quirks & QUIRK_PIPEB_FORCE))
6340 pipeconf |= I915_READ(PIPECONF(intel_crtc->pipe)) & PIPECONF_ENABLE;
6342 if (intel_crtc->config.double_wide)
6343 pipeconf |= PIPECONF_DOUBLE_WIDE;
6345 /* only g4x and later have fancy bpc/dither controls */
6346 if (IS_G4X(dev) || IS_VALLEYVIEW(dev)) {
6347 /* Bspec claims that we can't use dithering for 30bpp pipes. */
6348 if (intel_crtc->config.dither && intel_crtc->config.pipe_bpp != 30)
6349 pipeconf |= PIPECONF_DITHER_EN |
6350 PIPECONF_DITHER_TYPE_SP;
6352 switch (intel_crtc->config.pipe_bpp) {
6354 pipeconf |= PIPECONF_6BPC;
6357 pipeconf |= PIPECONF_8BPC;
6360 pipeconf |= PIPECONF_10BPC;
6363 /* Case prevented by intel_choose_pipe_bpp_dither. */
6368 if (HAS_PIPE_CXSR(dev)) {
6369 if (intel_crtc->lowfreq_avail) {
6370 DRM_DEBUG_KMS("enabling CxSR downclocking\n");
6371 pipeconf |= PIPECONF_CXSR_DOWNCLOCK;
6373 DRM_DEBUG_KMS("disabling CxSR downclocking\n");
6377 if (intel_crtc->config.adjusted_mode.flags & DRM_MODE_FLAG_INTERLACE) {
6378 if (INTEL_INFO(dev)->gen < 4 ||
6379 intel_pipe_has_type(intel_crtc, INTEL_OUTPUT_SDVO))
6380 pipeconf |= PIPECONF_INTERLACE_W_FIELD_INDICATION;
6382 pipeconf |= PIPECONF_INTERLACE_W_SYNC_SHIFT;
6384 pipeconf |= PIPECONF_PROGRESSIVE;
6386 if (IS_VALLEYVIEW(dev) && intel_crtc->config.limited_color_range)
6387 pipeconf |= PIPECONF_COLOR_RANGE_SELECT;
6389 I915_WRITE(PIPECONF(intel_crtc->pipe), pipeconf);
6390 POSTING_READ(PIPECONF(intel_crtc->pipe));
6393 static int i9xx_crtc_compute_clock(struct intel_crtc *crtc)
6395 struct drm_device *dev = crtc->base.dev;
6396 struct drm_i915_private *dev_priv = dev->dev_private;
6397 int refclk, num_connectors = 0;
6398 intel_clock_t clock, reduced_clock;
6399 bool ok, has_reduced_clock = false;
6400 bool is_lvds = false, is_dsi = false;
6401 struct intel_encoder *encoder;
6402 const intel_limit_t *limit;
6404 for_each_intel_encoder(dev, encoder) {
6405 if (encoder->new_crtc != crtc)
6408 switch (encoder->type) {
6409 case INTEL_OUTPUT_LVDS:
6412 case INTEL_OUTPUT_DSI:
6425 if (!crtc->new_config->clock_set) {
6426 refclk = i9xx_get_refclk(crtc, num_connectors);
6429 * Returns a set of divisors for the desired target clock with
6430 * the given refclk, or FALSE. The returned values represent
6431 * the clock equation: reflck * (5 * (m1 + 2) + (m2 + 2)) / (n +
6434 limit = intel_limit(crtc, refclk);
6435 ok = dev_priv->display.find_dpll(limit, crtc,
6436 crtc->new_config->port_clock,
6437 refclk, NULL, &clock);
6439 DRM_ERROR("Couldn't find PLL settings for mode!\n");
6443 if (is_lvds && dev_priv->lvds_downclock_avail) {
6445 * Ensure we match the reduced clock's P to the target
6446 * clock. If the clocks don't match, we can't switch
6447 * the display clock by using the FP0/FP1. In such case
6448 * we will disable the LVDS downclock feature.
6451 dev_priv->display.find_dpll(limit, crtc,
6452 dev_priv->lvds_downclock,
6456 /* Compat-code for transition, will disappear. */
6457 crtc->new_config->dpll.n = clock.n;
6458 crtc->new_config->dpll.m1 = clock.m1;
6459 crtc->new_config->dpll.m2 = clock.m2;
6460 crtc->new_config->dpll.p1 = clock.p1;
6461 crtc->new_config->dpll.p2 = clock.p2;
6465 i8xx_update_pll(crtc,
6466 has_reduced_clock ? &reduced_clock : NULL,
6468 } else if (IS_CHERRYVIEW(dev)) {
6469 chv_update_pll(crtc, crtc->new_config);
6470 } else if (IS_VALLEYVIEW(dev)) {
6471 vlv_update_pll(crtc, crtc->new_config);
6473 i9xx_update_pll(crtc,
6474 has_reduced_clock ? &reduced_clock : NULL,
6481 static void i9xx_get_pfit_config(struct intel_crtc *crtc,
6482 struct intel_crtc_config *pipe_config)
6484 struct drm_device *dev = crtc->base.dev;
6485 struct drm_i915_private *dev_priv = dev->dev_private;
6488 if (INTEL_INFO(dev)->gen <= 3 && (IS_I830(dev) || !IS_MOBILE(dev)))
6491 tmp = I915_READ(PFIT_CONTROL);
6492 if (!(tmp & PFIT_ENABLE))
6495 /* Check whether the pfit is attached to our pipe. */
6496 if (INTEL_INFO(dev)->gen < 4) {
6497 if (crtc->pipe != PIPE_B)
6500 if ((tmp & PFIT_PIPE_MASK) != (crtc->pipe << PFIT_PIPE_SHIFT))
6504 pipe_config->gmch_pfit.control = tmp;
6505 pipe_config->gmch_pfit.pgm_ratios = I915_READ(PFIT_PGM_RATIOS);
6506 if (INTEL_INFO(dev)->gen < 5)
6507 pipe_config->gmch_pfit.lvds_border_bits =
6508 I915_READ(LVDS) & LVDS_BORDER_ENABLE;
6511 static void vlv_crtc_clock_get(struct intel_crtc *crtc,
6512 struct intel_crtc_config *pipe_config)
6514 struct drm_device *dev = crtc->base.dev;
6515 struct drm_i915_private *dev_priv = dev->dev_private;
6516 int pipe = pipe_config->cpu_transcoder;
6517 intel_clock_t clock;
6519 int refclk = 100000;
6521 /* In case of MIPI DPLL will not even be used */
6522 if (!(pipe_config->dpll_hw_state.dpll & DPLL_VCO_ENABLE))
6525 mutex_lock(&dev_priv->dpio_lock);
6526 mdiv = vlv_dpio_read(dev_priv, pipe, VLV_PLL_DW3(pipe));
6527 mutex_unlock(&dev_priv->dpio_lock);
6529 clock.m1 = (mdiv >> DPIO_M1DIV_SHIFT) & 7;
6530 clock.m2 = mdiv & DPIO_M2DIV_MASK;
6531 clock.n = (mdiv >> DPIO_N_SHIFT) & 0xf;
6532 clock.p1 = (mdiv >> DPIO_P1_SHIFT) & 7;
6533 clock.p2 = (mdiv >> DPIO_P2_SHIFT) & 0x1f;
6535 vlv_clock(refclk, &clock);
6537 /* clock.dot is the fast clock */
6538 pipe_config->port_clock = clock.dot / 5;
6541 static void i9xx_get_plane_config(struct intel_crtc *crtc,
6542 struct intel_plane_config *plane_config)
6544 struct drm_device *dev = crtc->base.dev;
6545 struct drm_i915_private *dev_priv = dev->dev_private;
6546 u32 val, base, offset;
6547 int pipe = crtc->pipe, plane = crtc->plane;
6548 int fourcc, pixel_format;
6551 crtc->base.primary->fb = kzalloc(sizeof(struct intel_framebuffer), GFP_KERNEL);
6552 if (!crtc->base.primary->fb) {
6553 DRM_DEBUG_KMS("failed to alloc fb\n");
6557 val = I915_READ(DSPCNTR(plane));
6559 if (INTEL_INFO(dev)->gen >= 4)
6560 if (val & DISPPLANE_TILED)
6561 plane_config->tiled = true;
6563 pixel_format = val & DISPPLANE_PIXFORMAT_MASK;
6564 fourcc = intel_format_to_fourcc(pixel_format);
6565 crtc->base.primary->fb->pixel_format = fourcc;
6566 crtc->base.primary->fb->bits_per_pixel =
6567 drm_format_plane_cpp(fourcc, 0) * 8;
6569 if (INTEL_INFO(dev)->gen >= 4) {
6570 if (plane_config->tiled)
6571 offset = I915_READ(DSPTILEOFF(plane));
6573 offset = I915_READ(DSPLINOFF(plane));
6574 base = I915_READ(DSPSURF(plane)) & 0xfffff000;
6576 base = I915_READ(DSPADDR(plane));
6578 plane_config->base = base;
6580 val = I915_READ(PIPESRC(pipe));
6581 crtc->base.primary->fb->width = ((val >> 16) & 0xfff) + 1;
6582 crtc->base.primary->fb->height = ((val >> 0) & 0xfff) + 1;
6584 val = I915_READ(DSPSTRIDE(pipe));
6585 crtc->base.primary->fb->pitches[0] = val & 0xffffffc0;
6587 aligned_height = intel_align_height(dev, crtc->base.primary->fb->height,
6588 plane_config->tiled);
6590 plane_config->size = PAGE_ALIGN(crtc->base.primary->fb->pitches[0] *
6593 DRM_DEBUG_KMS("pipe/plane %d/%d with fb: size=%dx%d@%d, offset=%x, pitch %d, size 0x%x\n",
6594 pipe, plane, crtc->base.primary->fb->width,
6595 crtc->base.primary->fb->height,
6596 crtc->base.primary->fb->bits_per_pixel, base,
6597 crtc->base.primary->fb->pitches[0],
6598 plane_config->size);
6602 static void chv_crtc_clock_get(struct intel_crtc *crtc,
6603 struct intel_crtc_config *pipe_config)
6605 struct drm_device *dev = crtc->base.dev;
6606 struct drm_i915_private *dev_priv = dev->dev_private;
6607 int pipe = pipe_config->cpu_transcoder;
6608 enum dpio_channel port = vlv_pipe_to_channel(pipe);
6609 intel_clock_t clock;
6610 u32 cmn_dw13, pll_dw0, pll_dw1, pll_dw2;
6611 int refclk = 100000;
6613 mutex_lock(&dev_priv->dpio_lock);
6614 cmn_dw13 = vlv_dpio_read(dev_priv, pipe, CHV_CMN_DW13(port));
6615 pll_dw0 = vlv_dpio_read(dev_priv, pipe, CHV_PLL_DW0(port));
6616 pll_dw1 = vlv_dpio_read(dev_priv, pipe, CHV_PLL_DW1(port));
6617 pll_dw2 = vlv_dpio_read(dev_priv, pipe, CHV_PLL_DW2(port));
6618 mutex_unlock(&dev_priv->dpio_lock);
6620 clock.m1 = (pll_dw1 & 0x7) == DPIO_CHV_M1_DIV_BY_2 ? 2 : 0;
6621 clock.m2 = ((pll_dw0 & 0xff) << 22) | (pll_dw2 & 0x3fffff);
6622 clock.n = (pll_dw1 >> DPIO_CHV_N_DIV_SHIFT) & 0xf;
6623 clock.p1 = (cmn_dw13 >> DPIO_CHV_P1_DIV_SHIFT) & 0x7;
6624 clock.p2 = (cmn_dw13 >> DPIO_CHV_P2_DIV_SHIFT) & 0x1f;
6626 chv_clock(refclk, &clock);
6628 /* clock.dot is the fast clock */
6629 pipe_config->port_clock = clock.dot / 5;
6632 static bool i9xx_get_pipe_config(struct intel_crtc *crtc,
6633 struct intel_crtc_config *pipe_config)
6635 struct drm_device *dev = crtc->base.dev;
6636 struct drm_i915_private *dev_priv = dev->dev_private;
6639 if (!intel_display_power_is_enabled(dev_priv,
6640 POWER_DOMAIN_PIPE(crtc->pipe)))
6643 pipe_config->cpu_transcoder = (enum transcoder) crtc->pipe;
6644 pipe_config->shared_dpll = DPLL_ID_PRIVATE;
6646 tmp = I915_READ(PIPECONF(crtc->pipe));
6647 if (!(tmp & PIPECONF_ENABLE))
6650 if (IS_G4X(dev) || IS_VALLEYVIEW(dev)) {
6651 switch (tmp & PIPECONF_BPC_MASK) {
6653 pipe_config->pipe_bpp = 18;
6656 pipe_config->pipe_bpp = 24;
6658 case PIPECONF_10BPC:
6659 pipe_config->pipe_bpp = 30;
6666 if (IS_VALLEYVIEW(dev) && (tmp & PIPECONF_COLOR_RANGE_SELECT))
6667 pipe_config->limited_color_range = true;
6669 if (INTEL_INFO(dev)->gen < 4)
6670 pipe_config->double_wide = tmp & PIPECONF_DOUBLE_WIDE;
6672 intel_get_pipe_timings(crtc, pipe_config);
6674 i9xx_get_pfit_config(crtc, pipe_config);
6676 if (INTEL_INFO(dev)->gen >= 4) {
6677 tmp = I915_READ(DPLL_MD(crtc->pipe));
6678 pipe_config->pixel_multiplier =
6679 ((tmp & DPLL_MD_UDI_MULTIPLIER_MASK)
6680 >> DPLL_MD_UDI_MULTIPLIER_SHIFT) + 1;
6681 pipe_config->dpll_hw_state.dpll_md = tmp;
6682 } else if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev)) {
6683 tmp = I915_READ(DPLL(crtc->pipe));
6684 pipe_config->pixel_multiplier =
6685 ((tmp & SDVO_MULTIPLIER_MASK)
6686 >> SDVO_MULTIPLIER_SHIFT_HIRES) + 1;
6688 /* Note that on i915G/GM the pixel multiplier is in the sdvo
6689 * port and will be fixed up in the encoder->get_config
6691 pipe_config->pixel_multiplier = 1;
6693 pipe_config->dpll_hw_state.dpll = I915_READ(DPLL(crtc->pipe));
6694 if (!IS_VALLEYVIEW(dev)) {
6696 * DPLL_DVO_2X_MODE must be enabled for both DPLLs
6697 * on 830. Filter it out here so that we don't
6698 * report errors due to that.
6701 pipe_config->dpll_hw_state.dpll &= ~DPLL_DVO_2X_MODE;
6703 pipe_config->dpll_hw_state.fp0 = I915_READ(FP0(crtc->pipe));
6704 pipe_config->dpll_hw_state.fp1 = I915_READ(FP1(crtc->pipe));
6706 /* Mask out read-only status bits. */
6707 pipe_config->dpll_hw_state.dpll &= ~(DPLL_LOCK_VLV |
6708 DPLL_PORTC_READY_MASK |
6709 DPLL_PORTB_READY_MASK);
6712 if (IS_CHERRYVIEW(dev))
6713 chv_crtc_clock_get(crtc, pipe_config);
6714 else if (IS_VALLEYVIEW(dev))
6715 vlv_crtc_clock_get(crtc, pipe_config);
6717 i9xx_crtc_clock_get(crtc, pipe_config);
6722 static void ironlake_init_pch_refclk(struct drm_device *dev)
6724 struct drm_i915_private *dev_priv = dev->dev_private;
6725 struct intel_encoder *encoder;
6727 bool has_lvds = false;
6728 bool has_cpu_edp = false;
6729 bool has_panel = false;
6730 bool has_ck505 = false;
6731 bool can_ssc = false;
6733 /* We need to take the global config into account */
6734 for_each_intel_encoder(dev, encoder) {
6735 switch (encoder->type) {
6736 case INTEL_OUTPUT_LVDS:
6740 case INTEL_OUTPUT_EDP:
6742 if (enc_to_dig_port(&encoder->base)->port == PORT_A)
6750 if (HAS_PCH_IBX(dev)) {
6751 has_ck505 = dev_priv->vbt.display_clock_mode;
6752 can_ssc = has_ck505;
6758 DRM_DEBUG_KMS("has_panel %d has_lvds %d has_ck505 %d\n",
6759 has_panel, has_lvds, has_ck505);
6761 /* Ironlake: try to setup display ref clock before DPLL
6762 * enabling. This is only under driver's control after
6763 * PCH B stepping, previous chipset stepping should be
6764 * ignoring this setting.
6766 val = I915_READ(PCH_DREF_CONTROL);
6768 /* As we must carefully and slowly disable/enable each source in turn,
6769 * compute the final state we want first and check if we need to
6770 * make any changes at all.
6773 final &= ~DREF_NONSPREAD_SOURCE_MASK;
6775 final |= DREF_NONSPREAD_CK505_ENABLE;
6777 final |= DREF_NONSPREAD_SOURCE_ENABLE;
6779 final &= ~DREF_SSC_SOURCE_MASK;
6780 final &= ~DREF_CPU_SOURCE_OUTPUT_MASK;
6781 final &= ~DREF_SSC1_ENABLE;
6784 final |= DREF_SSC_SOURCE_ENABLE;
6786 if (intel_panel_use_ssc(dev_priv) && can_ssc)
6787 final |= DREF_SSC1_ENABLE;
6790 if (intel_panel_use_ssc(dev_priv) && can_ssc)
6791 final |= DREF_CPU_SOURCE_OUTPUT_DOWNSPREAD;
6793 final |= DREF_CPU_SOURCE_OUTPUT_NONSPREAD;
6795 final |= DREF_CPU_SOURCE_OUTPUT_DISABLE;
6797 final |= DREF_SSC_SOURCE_DISABLE;
6798 final |= DREF_CPU_SOURCE_OUTPUT_DISABLE;
6804 /* Always enable nonspread source */
6805 val &= ~DREF_NONSPREAD_SOURCE_MASK;
6808 val |= DREF_NONSPREAD_CK505_ENABLE;
6810 val |= DREF_NONSPREAD_SOURCE_ENABLE;
6813 val &= ~DREF_SSC_SOURCE_MASK;
6814 val |= DREF_SSC_SOURCE_ENABLE;
6816 /* SSC must be turned on before enabling the CPU output */
6817 if (intel_panel_use_ssc(dev_priv) && can_ssc) {
6818 DRM_DEBUG_KMS("Using SSC on panel\n");
6819 val |= DREF_SSC1_ENABLE;
6821 val &= ~DREF_SSC1_ENABLE;
6823 /* Get SSC going before enabling the outputs */
6824 I915_WRITE(PCH_DREF_CONTROL, val);
6825 POSTING_READ(PCH_DREF_CONTROL);
6828 val &= ~DREF_CPU_SOURCE_OUTPUT_MASK;
6830 /* Enable CPU source on CPU attached eDP */
6832 if (intel_panel_use_ssc(dev_priv) && can_ssc) {
6833 DRM_DEBUG_KMS("Using SSC on eDP\n");
6834 val |= DREF_CPU_SOURCE_OUTPUT_DOWNSPREAD;
6836 val |= DREF_CPU_SOURCE_OUTPUT_NONSPREAD;
6838 val |= DREF_CPU_SOURCE_OUTPUT_DISABLE;
6840 I915_WRITE(PCH_DREF_CONTROL, val);
6841 POSTING_READ(PCH_DREF_CONTROL);
6844 DRM_DEBUG_KMS("Disabling SSC entirely\n");
6846 val &= ~DREF_CPU_SOURCE_OUTPUT_MASK;
6848 /* Turn off CPU output */
6849 val |= DREF_CPU_SOURCE_OUTPUT_DISABLE;
6851 I915_WRITE(PCH_DREF_CONTROL, val);
6852 POSTING_READ(PCH_DREF_CONTROL);
6855 /* Turn off the SSC source */
6856 val &= ~DREF_SSC_SOURCE_MASK;
6857 val |= DREF_SSC_SOURCE_DISABLE;
6860 val &= ~DREF_SSC1_ENABLE;
6862 I915_WRITE(PCH_DREF_CONTROL, val);
6863 POSTING_READ(PCH_DREF_CONTROL);
6867 BUG_ON(val != final);
6870 static void lpt_reset_fdi_mphy(struct drm_i915_private *dev_priv)
6874 tmp = I915_READ(SOUTH_CHICKEN2);
6875 tmp |= FDI_MPHY_IOSFSB_RESET_CTL;
6876 I915_WRITE(SOUTH_CHICKEN2, tmp);
6878 if (wait_for_atomic_us(I915_READ(SOUTH_CHICKEN2) &
6879 FDI_MPHY_IOSFSB_RESET_STATUS, 100))
6880 DRM_ERROR("FDI mPHY reset assert timeout\n");
6882 tmp = I915_READ(SOUTH_CHICKEN2);
6883 tmp &= ~FDI_MPHY_IOSFSB_RESET_CTL;
6884 I915_WRITE(SOUTH_CHICKEN2, tmp);
6886 if (wait_for_atomic_us((I915_READ(SOUTH_CHICKEN2) &
6887 FDI_MPHY_IOSFSB_RESET_STATUS) == 0, 100))
6888 DRM_ERROR("FDI mPHY reset de-assert timeout\n");
6891 /* WaMPhyProgramming:hsw */
6892 static void lpt_program_fdi_mphy(struct drm_i915_private *dev_priv)
6896 tmp = intel_sbi_read(dev_priv, 0x8008, SBI_MPHY);
6897 tmp &= ~(0xFF << 24);
6898 tmp |= (0x12 << 24);
6899 intel_sbi_write(dev_priv, 0x8008, tmp, SBI_MPHY);
6901 tmp = intel_sbi_read(dev_priv, 0x2008, SBI_MPHY);
6903 intel_sbi_write(dev_priv, 0x2008, tmp, SBI_MPHY);
6905 tmp = intel_sbi_read(dev_priv, 0x2108, SBI_MPHY);
6907 intel_sbi_write(dev_priv, 0x2108, tmp, SBI_MPHY);
6909 tmp = intel_sbi_read(dev_priv, 0x206C, SBI_MPHY);
6910 tmp |= (1 << 24) | (1 << 21) | (1 << 18);
6911 intel_sbi_write(dev_priv, 0x206C, tmp, SBI_MPHY);
6913 tmp = intel_sbi_read(dev_priv, 0x216C, SBI_MPHY);
6914 tmp |= (1 << 24) | (1 << 21) | (1 << 18);
6915 intel_sbi_write(dev_priv, 0x216C, tmp, SBI_MPHY);
6917 tmp = intel_sbi_read(dev_priv, 0x2080, SBI_MPHY);
6920 intel_sbi_write(dev_priv, 0x2080, tmp, SBI_MPHY);
6922 tmp = intel_sbi_read(dev_priv, 0x2180, SBI_MPHY);
6925 intel_sbi_write(dev_priv, 0x2180, tmp, SBI_MPHY);
6927 tmp = intel_sbi_read(dev_priv, 0x208C, SBI_MPHY);
6930 intel_sbi_write(dev_priv, 0x208C, tmp, SBI_MPHY);
6932 tmp = intel_sbi_read(dev_priv, 0x218C, SBI_MPHY);
6935 intel_sbi_write(dev_priv, 0x218C, tmp, SBI_MPHY);
6937 tmp = intel_sbi_read(dev_priv, 0x2098, SBI_MPHY);
6938 tmp &= ~(0xFF << 16);
6939 tmp |= (0x1C << 16);
6940 intel_sbi_write(dev_priv, 0x2098, tmp, SBI_MPHY);
6942 tmp = intel_sbi_read(dev_priv, 0x2198, SBI_MPHY);
6943 tmp &= ~(0xFF << 16);
6944 tmp |= (0x1C << 16);
6945 intel_sbi_write(dev_priv, 0x2198, tmp, SBI_MPHY);
6947 tmp = intel_sbi_read(dev_priv, 0x20C4, SBI_MPHY);
6949 intel_sbi_write(dev_priv, 0x20C4, tmp, SBI_MPHY);
6951 tmp = intel_sbi_read(dev_priv, 0x21C4, SBI_MPHY);
6953 intel_sbi_write(dev_priv, 0x21C4, tmp, SBI_MPHY);
6955 tmp = intel_sbi_read(dev_priv, 0x20EC, SBI_MPHY);
6956 tmp &= ~(0xF << 28);
6958 intel_sbi_write(dev_priv, 0x20EC, tmp, SBI_MPHY);
6960 tmp = intel_sbi_read(dev_priv, 0x21EC, SBI_MPHY);
6961 tmp &= ~(0xF << 28);
6963 intel_sbi_write(dev_priv, 0x21EC, tmp, SBI_MPHY);
6966 /* Implements 3 different sequences from BSpec chapter "Display iCLK
6967 * Programming" based on the parameters passed:
6968 * - Sequence to enable CLKOUT_DP
6969 * - Sequence to enable CLKOUT_DP without spread
6970 * - Sequence to enable CLKOUT_DP for FDI usage and configure PCH FDI I/O
6972 static void lpt_enable_clkout_dp(struct drm_device *dev, bool with_spread,
6975 struct drm_i915_private *dev_priv = dev->dev_private;
6978 if (WARN(with_fdi && !with_spread, "FDI requires downspread\n"))
6980 if (WARN(dev_priv->pch_id == INTEL_PCH_LPT_LP_DEVICE_ID_TYPE &&
6981 with_fdi, "LP PCH doesn't have FDI\n"))
6984 mutex_lock(&dev_priv->dpio_lock);
6986 tmp = intel_sbi_read(dev_priv, SBI_SSCCTL, SBI_ICLK);
6987 tmp &= ~SBI_SSCCTL_DISABLE;
6988 tmp |= SBI_SSCCTL_PATHALT;
6989 intel_sbi_write(dev_priv, SBI_SSCCTL, tmp, SBI_ICLK);
6994 tmp = intel_sbi_read(dev_priv, SBI_SSCCTL, SBI_ICLK);
6995 tmp &= ~SBI_SSCCTL_PATHALT;
6996 intel_sbi_write(dev_priv, SBI_SSCCTL, tmp, SBI_ICLK);
6999 lpt_reset_fdi_mphy(dev_priv);
7000 lpt_program_fdi_mphy(dev_priv);
7004 reg = (dev_priv->pch_id == INTEL_PCH_LPT_LP_DEVICE_ID_TYPE) ?
7005 SBI_GEN0 : SBI_DBUFF0;
7006 tmp = intel_sbi_read(dev_priv, reg, SBI_ICLK);
7007 tmp |= SBI_GEN0_CFG_BUFFENABLE_DISABLE;
7008 intel_sbi_write(dev_priv, reg, tmp, SBI_ICLK);
7010 mutex_unlock(&dev_priv->dpio_lock);
7013 /* Sequence to disable CLKOUT_DP */
7014 static void lpt_disable_clkout_dp(struct drm_device *dev)
7016 struct drm_i915_private *dev_priv = dev->dev_private;
7019 mutex_lock(&dev_priv->dpio_lock);
7021 reg = (dev_priv->pch_id == INTEL_PCH_LPT_LP_DEVICE_ID_TYPE) ?
7022 SBI_GEN0 : SBI_DBUFF0;
7023 tmp = intel_sbi_read(dev_priv, reg, SBI_ICLK);
7024 tmp &= ~SBI_GEN0_CFG_BUFFENABLE_DISABLE;
7025 intel_sbi_write(dev_priv, reg, tmp, SBI_ICLK);
7027 tmp = intel_sbi_read(dev_priv, SBI_SSCCTL, SBI_ICLK);
7028 if (!(tmp & SBI_SSCCTL_DISABLE)) {
7029 if (!(tmp & SBI_SSCCTL_PATHALT)) {
7030 tmp |= SBI_SSCCTL_PATHALT;
7031 intel_sbi_write(dev_priv, SBI_SSCCTL, tmp, SBI_ICLK);
7034 tmp |= SBI_SSCCTL_DISABLE;
7035 intel_sbi_write(dev_priv, SBI_SSCCTL, tmp, SBI_ICLK);
7038 mutex_unlock(&dev_priv->dpio_lock);
7041 static void lpt_init_pch_refclk(struct drm_device *dev)
7043 struct intel_encoder *encoder;
7044 bool has_vga = false;
7046 for_each_intel_encoder(dev, encoder) {
7047 switch (encoder->type) {
7048 case INTEL_OUTPUT_ANALOG:
7057 lpt_enable_clkout_dp(dev, true, true);
7059 lpt_disable_clkout_dp(dev);
7063 * Initialize reference clocks when the driver loads
7065 void intel_init_pch_refclk(struct drm_device *dev)
7067 if (HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev))
7068 ironlake_init_pch_refclk(dev);
7069 else if (HAS_PCH_LPT(dev))
7070 lpt_init_pch_refclk(dev);
7073 static int ironlake_get_refclk(struct drm_crtc *crtc)
7075 struct drm_device *dev = crtc->dev;
7076 struct drm_i915_private *dev_priv = dev->dev_private;
7077 struct intel_encoder *encoder;
7078 int num_connectors = 0;
7079 bool is_lvds = false;
7081 for_each_intel_encoder(dev, encoder) {
7082 if (encoder->new_crtc != to_intel_crtc(crtc))
7085 switch (encoder->type) {
7086 case INTEL_OUTPUT_LVDS:
7095 if (is_lvds && intel_panel_use_ssc(dev_priv) && num_connectors < 2) {
7096 DRM_DEBUG_KMS("using SSC reference clock of %d kHz\n",
7097 dev_priv->vbt.lvds_ssc_freq);
7098 return dev_priv->vbt.lvds_ssc_freq;
7104 static void ironlake_set_pipeconf(struct drm_crtc *crtc)
7106 struct drm_i915_private *dev_priv = crtc->dev->dev_private;
7107 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
7108 int pipe = intel_crtc->pipe;
7113 switch (intel_crtc->config.pipe_bpp) {
7115 val |= PIPECONF_6BPC;
7118 val |= PIPECONF_8BPC;
7121 val |= PIPECONF_10BPC;
7124 val |= PIPECONF_12BPC;
7127 /* Case prevented by intel_choose_pipe_bpp_dither. */
7131 if (intel_crtc->config.dither)
7132 val |= (PIPECONF_DITHER_EN | PIPECONF_DITHER_TYPE_SP);
7134 if (intel_crtc->config.adjusted_mode.flags & DRM_MODE_FLAG_INTERLACE)
7135 val |= PIPECONF_INTERLACED_ILK;
7137 val |= PIPECONF_PROGRESSIVE;
7139 if (intel_crtc->config.limited_color_range)
7140 val |= PIPECONF_COLOR_RANGE_SELECT;
7142 I915_WRITE(PIPECONF(pipe), val);
7143 POSTING_READ(PIPECONF(pipe));
7147 * Set up the pipe CSC unit.
7149 * Currently only full range RGB to limited range RGB conversion
7150 * is supported, but eventually this should handle various
7151 * RGB<->YCbCr scenarios as well.
7153 static void intel_set_pipe_csc(struct drm_crtc *crtc)
7155 struct drm_device *dev = crtc->dev;
7156 struct drm_i915_private *dev_priv = dev->dev_private;
7157 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
7158 int pipe = intel_crtc->pipe;
7159 uint16_t coeff = 0x7800; /* 1.0 */
7162 * TODO: Check what kind of values actually come out of the pipe
7163 * with these coeff/postoff values and adjust to get the best
7164 * accuracy. Perhaps we even need to take the bpc value into
7168 if (intel_crtc->config.limited_color_range)
7169 coeff = ((235 - 16) * (1 << 12) / 255) & 0xff8; /* 0.xxx... */
7172 * GY/GU and RY/RU should be the other way around according
7173 * to BSpec, but reality doesn't agree. Just set them up in
7174 * a way that results in the correct picture.
7176 I915_WRITE(PIPE_CSC_COEFF_RY_GY(pipe), coeff << 16);
7177 I915_WRITE(PIPE_CSC_COEFF_BY(pipe), 0);
7179 I915_WRITE(PIPE_CSC_COEFF_RU_GU(pipe), coeff);
7180 I915_WRITE(PIPE_CSC_COEFF_BU(pipe), 0);
7182 I915_WRITE(PIPE_CSC_COEFF_RV_GV(pipe), 0);
7183 I915_WRITE(PIPE_CSC_COEFF_BV(pipe), coeff << 16);
7185 I915_WRITE(PIPE_CSC_PREOFF_HI(pipe), 0);
7186 I915_WRITE(PIPE_CSC_PREOFF_ME(pipe), 0);
7187 I915_WRITE(PIPE_CSC_PREOFF_LO(pipe), 0);
7189 if (INTEL_INFO(dev)->gen > 6) {
7190 uint16_t postoff = 0;
7192 if (intel_crtc->config.limited_color_range)
7193 postoff = (16 * (1 << 12) / 255) & 0x1fff;
7195 I915_WRITE(PIPE_CSC_POSTOFF_HI(pipe), postoff);
7196 I915_WRITE(PIPE_CSC_POSTOFF_ME(pipe), postoff);
7197 I915_WRITE(PIPE_CSC_POSTOFF_LO(pipe), postoff);
7199 I915_WRITE(PIPE_CSC_MODE(pipe), 0);
7201 uint32_t mode = CSC_MODE_YUV_TO_RGB;
7203 if (intel_crtc->config.limited_color_range)
7204 mode |= CSC_BLACK_SCREEN_OFFSET;
7206 I915_WRITE(PIPE_CSC_MODE(pipe), mode);
7210 static void haswell_set_pipeconf(struct drm_crtc *crtc)
7212 struct drm_device *dev = crtc->dev;
7213 struct drm_i915_private *dev_priv = dev->dev_private;
7214 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
7215 enum pipe pipe = intel_crtc->pipe;
7216 enum transcoder cpu_transcoder = intel_crtc->config.cpu_transcoder;
7221 if (IS_HASWELL(dev) && intel_crtc->config.dither)
7222 val |= (PIPECONF_DITHER_EN | PIPECONF_DITHER_TYPE_SP);
7224 if (intel_crtc->config.adjusted_mode.flags & DRM_MODE_FLAG_INTERLACE)
7225 val |= PIPECONF_INTERLACED_ILK;
7227 val |= PIPECONF_PROGRESSIVE;
7229 I915_WRITE(PIPECONF(cpu_transcoder), val);
7230 POSTING_READ(PIPECONF(cpu_transcoder));
7232 I915_WRITE(GAMMA_MODE(intel_crtc->pipe), GAMMA_MODE_MODE_8BIT);
7233 POSTING_READ(GAMMA_MODE(intel_crtc->pipe));
7235 if (IS_BROADWELL(dev) || INTEL_INFO(dev)->gen >= 9) {
7238 switch (intel_crtc->config.pipe_bpp) {
7240 val |= PIPEMISC_DITHER_6_BPC;
7243 val |= PIPEMISC_DITHER_8_BPC;
7246 val |= PIPEMISC_DITHER_10_BPC;
7249 val |= PIPEMISC_DITHER_12_BPC;
7252 /* Case prevented by pipe_config_set_bpp. */
7256 if (intel_crtc->config.dither)
7257 val |= PIPEMISC_DITHER_ENABLE | PIPEMISC_DITHER_TYPE_SP;
7259 I915_WRITE(PIPEMISC(pipe), val);
7263 static bool ironlake_compute_clocks(struct drm_crtc *crtc,
7264 intel_clock_t *clock,
7265 bool *has_reduced_clock,
7266 intel_clock_t *reduced_clock)
7268 struct drm_device *dev = crtc->dev;
7269 struct drm_i915_private *dev_priv = dev->dev_private;
7270 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
7272 const intel_limit_t *limit;
7273 bool ret, is_lvds = false;
7275 is_lvds = intel_pipe_will_have_type(intel_crtc, INTEL_OUTPUT_LVDS);
7277 refclk = ironlake_get_refclk(crtc);
7280 * Returns a set of divisors for the desired target clock with the given
7281 * refclk, or FALSE. The returned values represent the clock equation:
7282 * reflck * (5 * (m1 + 2) + (m2 + 2)) / (n + 2) / p1 / p2.
7284 limit = intel_limit(intel_crtc, refclk);
7285 ret = dev_priv->display.find_dpll(limit, intel_crtc,
7286 intel_crtc->new_config->port_clock,
7287 refclk, NULL, clock);
7291 if (is_lvds && dev_priv->lvds_downclock_avail) {
7293 * Ensure we match the reduced clock's P to the target clock.
7294 * If the clocks don't match, we can't switch the display clock
7295 * by using the FP0/FP1. In such case we will disable the LVDS
7296 * downclock feature.
7298 *has_reduced_clock =
7299 dev_priv->display.find_dpll(limit, intel_crtc,
7300 dev_priv->lvds_downclock,
7308 int ironlake_get_lanes_required(int target_clock, int link_bw, int bpp)
7311 * Account for spread spectrum to avoid
7312 * oversubscribing the link. Max center spread
7313 * is 2.5%; use 5% for safety's sake.
7315 u32 bps = target_clock * bpp * 21 / 20;
7316 return DIV_ROUND_UP(bps, link_bw * 8);
7319 static bool ironlake_needs_fb_cb_tune(struct dpll *dpll, int factor)
7321 return i9xx_dpll_compute_m(dpll) < factor * dpll->n;
7324 static uint32_t ironlake_compute_dpll(struct intel_crtc *intel_crtc,
7326 intel_clock_t *reduced_clock, u32 *fp2)
7328 struct drm_crtc *crtc = &intel_crtc->base;
7329 struct drm_device *dev = crtc->dev;
7330 struct drm_i915_private *dev_priv = dev->dev_private;
7331 struct intel_encoder *intel_encoder;
7333 int factor, num_connectors = 0;
7334 bool is_lvds = false, is_sdvo = false;
7336 for_each_intel_encoder(dev, intel_encoder) {
7337 if (intel_encoder->new_crtc != to_intel_crtc(crtc))
7340 switch (intel_encoder->type) {
7341 case INTEL_OUTPUT_LVDS:
7344 case INTEL_OUTPUT_SDVO:
7345 case INTEL_OUTPUT_HDMI:
7355 /* Enable autotuning of the PLL clock (if permissible) */
7358 if ((intel_panel_use_ssc(dev_priv) &&
7359 dev_priv->vbt.lvds_ssc_freq == 100000) ||
7360 (HAS_PCH_IBX(dev) && intel_is_dual_link_lvds(dev)))
7362 } else if (intel_crtc->new_config->sdvo_tv_clock)
7365 if (ironlake_needs_fb_cb_tune(&intel_crtc->new_config->dpll, factor))
7368 if (fp2 && (reduced_clock->m < factor * reduced_clock->n))
7374 dpll |= DPLLB_MODE_LVDS;
7376 dpll |= DPLLB_MODE_DAC_SERIAL;
7378 dpll |= (intel_crtc->new_config->pixel_multiplier - 1)
7379 << PLL_REF_SDVO_HDMI_MULTIPLIER_SHIFT;
7382 dpll |= DPLL_SDVO_HIGH_SPEED;
7383 if (intel_crtc->new_config->has_dp_encoder)
7384 dpll |= DPLL_SDVO_HIGH_SPEED;
7386 /* compute bitmask from p1 value */
7387 dpll |= (1 << (intel_crtc->new_config->dpll.p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT;
7389 dpll |= (1 << (intel_crtc->new_config->dpll.p1 - 1)) << DPLL_FPA1_P1_POST_DIV_SHIFT;
7391 switch (intel_crtc->new_config->dpll.p2) {
7393 dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_5;
7396 dpll |= DPLLB_LVDS_P2_CLOCK_DIV_7;
7399 dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_10;
7402 dpll |= DPLLB_LVDS_P2_CLOCK_DIV_14;
7406 if (is_lvds && intel_panel_use_ssc(dev_priv) && num_connectors < 2)
7407 dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN;
7409 dpll |= PLL_REF_INPUT_DREFCLK;
7411 return dpll | DPLL_VCO_ENABLE;
7414 static int ironlake_crtc_compute_clock(struct intel_crtc *crtc)
7416 struct drm_device *dev = crtc->base.dev;
7417 intel_clock_t clock, reduced_clock;
7418 u32 dpll = 0, fp = 0, fp2 = 0;
7419 bool ok, has_reduced_clock = false;
7420 bool is_lvds = false;
7421 struct intel_shared_dpll *pll;
7423 is_lvds = intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS);
7425 WARN(!(HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev)),
7426 "Unexpected PCH type %d\n", INTEL_PCH_TYPE(dev));
7428 ok = ironlake_compute_clocks(&crtc->base, &clock,
7429 &has_reduced_clock, &reduced_clock);
7430 if (!ok && !crtc->new_config->clock_set) {
7431 DRM_ERROR("Couldn't find PLL settings for mode!\n");
7434 /* Compat-code for transition, will disappear. */
7435 if (!crtc->new_config->clock_set) {
7436 crtc->new_config->dpll.n = clock.n;
7437 crtc->new_config->dpll.m1 = clock.m1;
7438 crtc->new_config->dpll.m2 = clock.m2;
7439 crtc->new_config->dpll.p1 = clock.p1;
7440 crtc->new_config->dpll.p2 = clock.p2;
7443 /* CPU eDP is the only output that doesn't need a PCH PLL of its own. */
7444 if (crtc->new_config->has_pch_encoder) {
7445 fp = i9xx_dpll_compute_fp(&crtc->new_config->dpll);
7446 if (has_reduced_clock)
7447 fp2 = i9xx_dpll_compute_fp(&reduced_clock);
7449 dpll = ironlake_compute_dpll(crtc,
7450 &fp, &reduced_clock,
7451 has_reduced_clock ? &fp2 : NULL);
7453 crtc->new_config->dpll_hw_state.dpll = dpll;
7454 crtc->new_config->dpll_hw_state.fp0 = fp;
7455 if (has_reduced_clock)
7456 crtc->new_config->dpll_hw_state.fp1 = fp2;
7458 crtc->new_config->dpll_hw_state.fp1 = fp;
7460 pll = intel_get_shared_dpll(crtc);
7462 DRM_DEBUG_DRIVER("failed to find PLL for pipe %c\n",
7463 pipe_name(crtc->pipe));
7468 if (is_lvds && has_reduced_clock && i915.powersave)
7469 crtc->lowfreq_avail = true;
7471 crtc->lowfreq_avail = false;
7476 static void intel_pch_transcoder_get_m_n(struct intel_crtc *crtc,
7477 struct intel_link_m_n *m_n)
7479 struct drm_device *dev = crtc->base.dev;
7480 struct drm_i915_private *dev_priv = dev->dev_private;
7481 enum pipe pipe = crtc->pipe;
7483 m_n->link_m = I915_READ(PCH_TRANS_LINK_M1(pipe));
7484 m_n->link_n = I915_READ(PCH_TRANS_LINK_N1(pipe));
7485 m_n->gmch_m = I915_READ(PCH_TRANS_DATA_M1(pipe))
7487 m_n->gmch_n = I915_READ(PCH_TRANS_DATA_N1(pipe));
7488 m_n->tu = ((I915_READ(PCH_TRANS_DATA_M1(pipe))
7489 & TU_SIZE_MASK) >> TU_SIZE_SHIFT) + 1;
7492 static void intel_cpu_transcoder_get_m_n(struct intel_crtc *crtc,
7493 enum transcoder transcoder,
7494 struct intel_link_m_n *m_n,
7495 struct intel_link_m_n *m2_n2)
7497 struct drm_device *dev = crtc->base.dev;
7498 struct drm_i915_private *dev_priv = dev->dev_private;
7499 enum pipe pipe = crtc->pipe;
7501 if (INTEL_INFO(dev)->gen >= 5) {
7502 m_n->link_m = I915_READ(PIPE_LINK_M1(transcoder));
7503 m_n->link_n = I915_READ(PIPE_LINK_N1(transcoder));
7504 m_n->gmch_m = I915_READ(PIPE_DATA_M1(transcoder))
7506 m_n->gmch_n = I915_READ(PIPE_DATA_N1(transcoder));
7507 m_n->tu = ((I915_READ(PIPE_DATA_M1(transcoder))
7508 & TU_SIZE_MASK) >> TU_SIZE_SHIFT) + 1;
7509 /* Read M2_N2 registers only for gen < 8 (M2_N2 available for
7510 * gen < 8) and if DRRS is supported (to make sure the
7511 * registers are not unnecessarily read).
7513 if (m2_n2 && INTEL_INFO(dev)->gen < 8 &&
7514 crtc->config.has_drrs) {
7515 m2_n2->link_m = I915_READ(PIPE_LINK_M2(transcoder));
7516 m2_n2->link_n = I915_READ(PIPE_LINK_N2(transcoder));
7517 m2_n2->gmch_m = I915_READ(PIPE_DATA_M2(transcoder))
7519 m2_n2->gmch_n = I915_READ(PIPE_DATA_N2(transcoder));
7520 m2_n2->tu = ((I915_READ(PIPE_DATA_M2(transcoder))
7521 & TU_SIZE_MASK) >> TU_SIZE_SHIFT) + 1;
7524 m_n->link_m = I915_READ(PIPE_LINK_M_G4X(pipe));
7525 m_n->link_n = I915_READ(PIPE_LINK_N_G4X(pipe));
7526 m_n->gmch_m = I915_READ(PIPE_DATA_M_G4X(pipe))
7528 m_n->gmch_n = I915_READ(PIPE_DATA_N_G4X(pipe));
7529 m_n->tu = ((I915_READ(PIPE_DATA_M_G4X(pipe))
7530 & TU_SIZE_MASK) >> TU_SIZE_SHIFT) + 1;
7534 void intel_dp_get_m_n(struct intel_crtc *crtc,
7535 struct intel_crtc_config *pipe_config)
7537 if (crtc->config.has_pch_encoder)
7538 intel_pch_transcoder_get_m_n(crtc, &pipe_config->dp_m_n);
7540 intel_cpu_transcoder_get_m_n(crtc, pipe_config->cpu_transcoder,
7541 &pipe_config->dp_m_n,
7542 &pipe_config->dp_m2_n2);
7545 static void ironlake_get_fdi_m_n_config(struct intel_crtc *crtc,
7546 struct intel_crtc_config *pipe_config)
7548 intel_cpu_transcoder_get_m_n(crtc, pipe_config->cpu_transcoder,
7549 &pipe_config->fdi_m_n, NULL);
7552 static void ironlake_get_pfit_config(struct intel_crtc *crtc,
7553 struct intel_crtc_config *pipe_config)
7555 struct drm_device *dev = crtc->base.dev;
7556 struct drm_i915_private *dev_priv = dev->dev_private;
7559 tmp = I915_READ(PF_CTL(crtc->pipe));
7561 if (tmp & PF_ENABLE) {
7562 pipe_config->pch_pfit.enabled = true;
7563 pipe_config->pch_pfit.pos = I915_READ(PF_WIN_POS(crtc->pipe));
7564 pipe_config->pch_pfit.size = I915_READ(PF_WIN_SZ(crtc->pipe));
7566 /* We currently do not free assignements of panel fitters on
7567 * ivb/hsw (since we don't use the higher upscaling modes which
7568 * differentiates them) so just WARN about this case for now. */
7570 WARN_ON((tmp & PF_PIPE_SEL_MASK_IVB) !=
7571 PF_PIPE_SEL_IVB(crtc->pipe));
7576 static void ironlake_get_plane_config(struct intel_crtc *crtc,
7577 struct intel_plane_config *plane_config)
7579 struct drm_device *dev = crtc->base.dev;
7580 struct drm_i915_private *dev_priv = dev->dev_private;
7581 u32 val, base, offset;
7582 int pipe = crtc->pipe, plane = crtc->plane;
7583 int fourcc, pixel_format;
7586 crtc->base.primary->fb = kzalloc(sizeof(struct intel_framebuffer), GFP_KERNEL);
7587 if (!crtc->base.primary->fb) {
7588 DRM_DEBUG_KMS("failed to alloc fb\n");
7592 val = I915_READ(DSPCNTR(plane));
7594 if (INTEL_INFO(dev)->gen >= 4)
7595 if (val & DISPPLANE_TILED)
7596 plane_config->tiled = true;
7598 pixel_format = val & DISPPLANE_PIXFORMAT_MASK;
7599 fourcc = intel_format_to_fourcc(pixel_format);
7600 crtc->base.primary->fb->pixel_format = fourcc;
7601 crtc->base.primary->fb->bits_per_pixel =
7602 drm_format_plane_cpp(fourcc, 0) * 8;
7604 base = I915_READ(DSPSURF(plane)) & 0xfffff000;
7605 if (IS_HASWELL(dev) || IS_BROADWELL(dev)) {
7606 offset = I915_READ(DSPOFFSET(plane));
7608 if (plane_config->tiled)
7609 offset = I915_READ(DSPTILEOFF(plane));
7611 offset = I915_READ(DSPLINOFF(plane));
7613 plane_config->base = base;
7615 val = I915_READ(PIPESRC(pipe));
7616 crtc->base.primary->fb->width = ((val >> 16) & 0xfff) + 1;
7617 crtc->base.primary->fb->height = ((val >> 0) & 0xfff) + 1;
7619 val = I915_READ(DSPSTRIDE(pipe));
7620 crtc->base.primary->fb->pitches[0] = val & 0xffffffc0;
7622 aligned_height = intel_align_height(dev, crtc->base.primary->fb->height,
7623 plane_config->tiled);
7625 plane_config->size = PAGE_ALIGN(crtc->base.primary->fb->pitches[0] *
7628 DRM_DEBUG_KMS("pipe/plane %d/%d with fb: size=%dx%d@%d, offset=%x, pitch %d, size 0x%x\n",
7629 pipe, plane, crtc->base.primary->fb->width,
7630 crtc->base.primary->fb->height,
7631 crtc->base.primary->fb->bits_per_pixel, base,
7632 crtc->base.primary->fb->pitches[0],
7633 plane_config->size);
7636 static bool ironlake_get_pipe_config(struct intel_crtc *crtc,
7637 struct intel_crtc_config *pipe_config)
7639 struct drm_device *dev = crtc->base.dev;
7640 struct drm_i915_private *dev_priv = dev->dev_private;
7643 if (!intel_display_power_is_enabled(dev_priv,
7644 POWER_DOMAIN_PIPE(crtc->pipe)))
7647 pipe_config->cpu_transcoder = (enum transcoder) crtc->pipe;
7648 pipe_config->shared_dpll = DPLL_ID_PRIVATE;
7650 tmp = I915_READ(PIPECONF(crtc->pipe));
7651 if (!(tmp & PIPECONF_ENABLE))
7654 switch (tmp & PIPECONF_BPC_MASK) {
7656 pipe_config->pipe_bpp = 18;
7659 pipe_config->pipe_bpp = 24;
7661 case PIPECONF_10BPC:
7662 pipe_config->pipe_bpp = 30;
7664 case PIPECONF_12BPC:
7665 pipe_config->pipe_bpp = 36;
7671 if (tmp & PIPECONF_COLOR_RANGE_SELECT)
7672 pipe_config->limited_color_range = true;
7674 if (I915_READ(PCH_TRANSCONF(crtc->pipe)) & TRANS_ENABLE) {
7675 struct intel_shared_dpll *pll;
7677 pipe_config->has_pch_encoder = true;
7679 tmp = I915_READ(FDI_RX_CTL(crtc->pipe));
7680 pipe_config->fdi_lanes = ((FDI_DP_PORT_WIDTH_MASK & tmp) >>
7681 FDI_DP_PORT_WIDTH_SHIFT) + 1;
7683 ironlake_get_fdi_m_n_config(crtc, pipe_config);
7685 if (HAS_PCH_IBX(dev_priv->dev)) {
7686 pipe_config->shared_dpll =
7687 (enum intel_dpll_id) crtc->pipe;
7689 tmp = I915_READ(PCH_DPLL_SEL);
7690 if (tmp & TRANS_DPLLB_SEL(crtc->pipe))
7691 pipe_config->shared_dpll = DPLL_ID_PCH_PLL_B;
7693 pipe_config->shared_dpll = DPLL_ID_PCH_PLL_A;
7696 pll = &dev_priv->shared_dplls[pipe_config->shared_dpll];
7698 WARN_ON(!pll->get_hw_state(dev_priv, pll,
7699 &pipe_config->dpll_hw_state));
7701 tmp = pipe_config->dpll_hw_state.dpll;
7702 pipe_config->pixel_multiplier =
7703 ((tmp & PLL_REF_SDVO_HDMI_MULTIPLIER_MASK)
7704 >> PLL_REF_SDVO_HDMI_MULTIPLIER_SHIFT) + 1;
7706 ironlake_pch_clock_get(crtc, pipe_config);
7708 pipe_config->pixel_multiplier = 1;
7711 intel_get_pipe_timings(crtc, pipe_config);
7713 ironlake_get_pfit_config(crtc, pipe_config);
7718 static void assert_can_disable_lcpll(struct drm_i915_private *dev_priv)
7720 struct drm_device *dev = dev_priv->dev;
7721 struct intel_crtc *crtc;
7723 for_each_intel_crtc(dev, crtc)
7724 WARN(crtc->active, "CRTC for pipe %c enabled\n",
7725 pipe_name(crtc->pipe));
7727 WARN(I915_READ(HSW_PWR_WELL_DRIVER), "Power well on\n");
7728 WARN(I915_READ(SPLL_CTL) & SPLL_PLL_ENABLE, "SPLL enabled\n");
7729 WARN(I915_READ(WRPLL_CTL1) & WRPLL_PLL_ENABLE, "WRPLL1 enabled\n");
7730 WARN(I915_READ(WRPLL_CTL2) & WRPLL_PLL_ENABLE, "WRPLL2 enabled\n");
7731 WARN(I915_READ(PCH_PP_STATUS) & PP_ON, "Panel power on\n");
7732 WARN(I915_READ(BLC_PWM_CPU_CTL2) & BLM_PWM_ENABLE,
7733 "CPU PWM1 enabled\n");
7734 if (IS_HASWELL(dev))
7735 WARN(I915_READ(HSW_BLC_PWM2_CTL) & BLM_PWM_ENABLE,
7736 "CPU PWM2 enabled\n");
7737 WARN(I915_READ(BLC_PWM_PCH_CTL1) & BLM_PCH_PWM_ENABLE,
7738 "PCH PWM1 enabled\n");
7739 WARN(I915_READ(UTIL_PIN_CTL) & UTIL_PIN_ENABLE,
7740 "Utility pin enabled\n");
7741 WARN(I915_READ(PCH_GTC_CTL) & PCH_GTC_ENABLE, "PCH GTC enabled\n");
7744 * In theory we can still leave IRQs enabled, as long as only the HPD
7745 * interrupts remain enabled. We used to check for that, but since it's
7746 * gen-specific and since we only disable LCPLL after we fully disable
7747 * the interrupts, the check below should be enough.
7749 WARN(intel_irqs_enabled(dev_priv), "IRQs enabled\n");
7752 static uint32_t hsw_read_dcomp(struct drm_i915_private *dev_priv)
7754 struct drm_device *dev = dev_priv->dev;
7756 if (IS_HASWELL(dev))
7757 return I915_READ(D_COMP_HSW);
7759 return I915_READ(D_COMP_BDW);
7762 static void hsw_write_dcomp(struct drm_i915_private *dev_priv, uint32_t val)
7764 struct drm_device *dev = dev_priv->dev;
7766 if (IS_HASWELL(dev)) {
7767 mutex_lock(&dev_priv->rps.hw_lock);
7768 if (sandybridge_pcode_write(dev_priv, GEN6_PCODE_WRITE_D_COMP,
7770 DRM_ERROR("Failed to write to D_COMP\n");
7771 mutex_unlock(&dev_priv->rps.hw_lock);
7773 I915_WRITE(D_COMP_BDW, val);
7774 POSTING_READ(D_COMP_BDW);
7779 * This function implements pieces of two sequences from BSpec:
7780 * - Sequence for display software to disable LCPLL
7781 * - Sequence for display software to allow package C8+
7782 * The steps implemented here are just the steps that actually touch the LCPLL
7783 * register. Callers should take care of disabling all the display engine
7784 * functions, doing the mode unset, fixing interrupts, etc.
7786 static void hsw_disable_lcpll(struct drm_i915_private *dev_priv,
7787 bool switch_to_fclk, bool allow_power_down)
7791 assert_can_disable_lcpll(dev_priv);
7793 val = I915_READ(LCPLL_CTL);
7795 if (switch_to_fclk) {
7796 val |= LCPLL_CD_SOURCE_FCLK;
7797 I915_WRITE(LCPLL_CTL, val);
7799 if (wait_for_atomic_us(I915_READ(LCPLL_CTL) &
7800 LCPLL_CD_SOURCE_FCLK_DONE, 1))
7801 DRM_ERROR("Switching to FCLK failed\n");
7803 val = I915_READ(LCPLL_CTL);
7806 val |= LCPLL_PLL_DISABLE;
7807 I915_WRITE(LCPLL_CTL, val);
7808 POSTING_READ(LCPLL_CTL);
7810 if (wait_for((I915_READ(LCPLL_CTL) & LCPLL_PLL_LOCK) == 0, 1))
7811 DRM_ERROR("LCPLL still locked\n");
7813 val = hsw_read_dcomp(dev_priv);
7814 val |= D_COMP_COMP_DISABLE;
7815 hsw_write_dcomp(dev_priv, val);
7818 if (wait_for((hsw_read_dcomp(dev_priv) & D_COMP_RCOMP_IN_PROGRESS) == 0,
7820 DRM_ERROR("D_COMP RCOMP still in progress\n");
7822 if (allow_power_down) {
7823 val = I915_READ(LCPLL_CTL);
7824 val |= LCPLL_POWER_DOWN_ALLOW;
7825 I915_WRITE(LCPLL_CTL, val);
7826 POSTING_READ(LCPLL_CTL);
7831 * Fully restores LCPLL, disallowing power down and switching back to LCPLL
7834 static void hsw_restore_lcpll(struct drm_i915_private *dev_priv)
7838 val = I915_READ(LCPLL_CTL);
7840 if ((val & (LCPLL_PLL_LOCK | LCPLL_PLL_DISABLE | LCPLL_CD_SOURCE_FCLK |
7841 LCPLL_POWER_DOWN_ALLOW)) == LCPLL_PLL_LOCK)
7845 * Make sure we're not on PC8 state before disabling PC8, otherwise
7846 * we'll hang the machine. To prevent PC8 state, just enable force_wake.
7848 * The other problem is that hsw_restore_lcpll() is called as part of
7849 * the runtime PM resume sequence, so we can't just call
7850 * gen6_gt_force_wake_get() because that function calls
7851 * intel_runtime_pm_get(), and we can't change the runtime PM refcount
7852 * while we are on the resume sequence. So to solve this problem we have
7853 * to call special forcewake code that doesn't touch runtime PM and
7854 * doesn't enable the forcewake delayed work.
7856 spin_lock_irq(&dev_priv->uncore.lock);
7857 if (dev_priv->uncore.forcewake_count++ == 0)
7858 dev_priv->uncore.funcs.force_wake_get(dev_priv, FORCEWAKE_ALL);
7859 spin_unlock_irq(&dev_priv->uncore.lock);
7861 if (val & LCPLL_POWER_DOWN_ALLOW) {
7862 val &= ~LCPLL_POWER_DOWN_ALLOW;
7863 I915_WRITE(LCPLL_CTL, val);
7864 POSTING_READ(LCPLL_CTL);
7867 val = hsw_read_dcomp(dev_priv);
7868 val |= D_COMP_COMP_FORCE;
7869 val &= ~D_COMP_COMP_DISABLE;
7870 hsw_write_dcomp(dev_priv, val);
7872 val = I915_READ(LCPLL_CTL);
7873 val &= ~LCPLL_PLL_DISABLE;
7874 I915_WRITE(LCPLL_CTL, val);
7876 if (wait_for(I915_READ(LCPLL_CTL) & LCPLL_PLL_LOCK, 5))
7877 DRM_ERROR("LCPLL not locked yet\n");
7879 if (val & LCPLL_CD_SOURCE_FCLK) {
7880 val = I915_READ(LCPLL_CTL);
7881 val &= ~LCPLL_CD_SOURCE_FCLK;
7882 I915_WRITE(LCPLL_CTL, val);
7884 if (wait_for_atomic_us((I915_READ(LCPLL_CTL) &
7885 LCPLL_CD_SOURCE_FCLK_DONE) == 0, 1))
7886 DRM_ERROR("Switching back to LCPLL failed\n");
7889 /* See the big comment above. */
7890 spin_lock_irq(&dev_priv->uncore.lock);
7891 if (--dev_priv->uncore.forcewake_count == 0)
7892 dev_priv->uncore.funcs.force_wake_put(dev_priv, FORCEWAKE_ALL);
7893 spin_unlock_irq(&dev_priv->uncore.lock);
7897 * Package states C8 and deeper are really deep PC states that can only be
7898 * reached when all the devices on the system allow it, so even if the graphics
7899 * device allows PC8+, it doesn't mean the system will actually get to these
7900 * states. Our driver only allows PC8+ when going into runtime PM.
7902 * The requirements for PC8+ are that all the outputs are disabled, the power
7903 * well is disabled and most interrupts are disabled, and these are also
7904 * requirements for runtime PM. When these conditions are met, we manually do
7905 * the other conditions: disable the interrupts, clocks and switch LCPLL refclk
7906 * to Fclk. If we're in PC8+ and we get an non-hotplug interrupt, we can hard
7909 * When we really reach PC8 or deeper states (not just when we allow it) we lose
7910 * the state of some registers, so when we come back from PC8+ we need to
7911 * restore this state. We don't get into PC8+ if we're not in RC6, so we don't
7912 * need to take care of the registers kept by RC6. Notice that this happens even
7913 * if we don't put the device in PCI D3 state (which is what currently happens
7914 * because of the runtime PM support).
7916 * For more, read "Display Sequences for Package C8" on the hardware
7919 void hsw_enable_pc8(struct drm_i915_private *dev_priv)
7921 struct drm_device *dev = dev_priv->dev;
7924 DRM_DEBUG_KMS("Enabling package C8+\n");
7926 if (dev_priv->pch_id == INTEL_PCH_LPT_LP_DEVICE_ID_TYPE) {
7927 val = I915_READ(SOUTH_DSPCLK_GATE_D);
7928 val &= ~PCH_LP_PARTITION_LEVEL_DISABLE;
7929 I915_WRITE(SOUTH_DSPCLK_GATE_D, val);
7932 lpt_disable_clkout_dp(dev);
7933 hsw_disable_lcpll(dev_priv, true, true);
7936 void hsw_disable_pc8(struct drm_i915_private *dev_priv)
7938 struct drm_device *dev = dev_priv->dev;
7941 DRM_DEBUG_KMS("Disabling package C8+\n");
7943 hsw_restore_lcpll(dev_priv);
7944 lpt_init_pch_refclk(dev);
7946 if (dev_priv->pch_id == INTEL_PCH_LPT_LP_DEVICE_ID_TYPE) {
7947 val = I915_READ(SOUTH_DSPCLK_GATE_D);
7948 val |= PCH_LP_PARTITION_LEVEL_DISABLE;
7949 I915_WRITE(SOUTH_DSPCLK_GATE_D, val);
7952 intel_prepare_ddi(dev);
7955 static int haswell_crtc_compute_clock(struct intel_crtc *crtc)
7957 if (!intel_ddi_pll_select(crtc))
7960 crtc->lowfreq_avail = false;
7965 static void haswell_get_ddi_pll(struct drm_i915_private *dev_priv,
7967 struct intel_crtc_config *pipe_config)
7969 pipe_config->ddi_pll_sel = I915_READ(PORT_CLK_SEL(port));
7971 switch (pipe_config->ddi_pll_sel) {
7972 case PORT_CLK_SEL_WRPLL1:
7973 pipe_config->shared_dpll = DPLL_ID_WRPLL1;
7975 case PORT_CLK_SEL_WRPLL2:
7976 pipe_config->shared_dpll = DPLL_ID_WRPLL2;
7981 static void haswell_get_ddi_port_state(struct intel_crtc *crtc,
7982 struct intel_crtc_config *pipe_config)
7984 struct drm_device *dev = crtc->base.dev;
7985 struct drm_i915_private *dev_priv = dev->dev_private;
7986 struct intel_shared_dpll *pll;
7990 tmp = I915_READ(TRANS_DDI_FUNC_CTL(pipe_config->cpu_transcoder));
7992 port = (tmp & TRANS_DDI_PORT_MASK) >> TRANS_DDI_PORT_SHIFT;
7994 haswell_get_ddi_pll(dev_priv, port, pipe_config);
7996 if (pipe_config->shared_dpll >= 0) {
7997 pll = &dev_priv->shared_dplls[pipe_config->shared_dpll];
7999 WARN_ON(!pll->get_hw_state(dev_priv, pll,
8000 &pipe_config->dpll_hw_state));
8004 * Haswell has only FDI/PCH transcoder A. It is which is connected to
8005 * DDI E. So just check whether this pipe is wired to DDI E and whether
8006 * the PCH transcoder is on.
8008 if (INTEL_INFO(dev)->gen < 9 &&
8009 (port == PORT_E) && I915_READ(LPT_TRANSCONF) & TRANS_ENABLE) {
8010 pipe_config->has_pch_encoder = true;
8012 tmp = I915_READ(FDI_RX_CTL(PIPE_A));
8013 pipe_config->fdi_lanes = ((FDI_DP_PORT_WIDTH_MASK & tmp) >>
8014 FDI_DP_PORT_WIDTH_SHIFT) + 1;
8016 ironlake_get_fdi_m_n_config(crtc, pipe_config);
8020 static bool haswell_get_pipe_config(struct intel_crtc *crtc,
8021 struct intel_crtc_config *pipe_config)
8023 struct drm_device *dev = crtc->base.dev;
8024 struct drm_i915_private *dev_priv = dev->dev_private;
8025 enum intel_display_power_domain pfit_domain;
8028 if (!intel_display_power_is_enabled(dev_priv,
8029 POWER_DOMAIN_PIPE(crtc->pipe)))
8032 pipe_config->cpu_transcoder = (enum transcoder) crtc->pipe;
8033 pipe_config->shared_dpll = DPLL_ID_PRIVATE;
8035 tmp = I915_READ(TRANS_DDI_FUNC_CTL(TRANSCODER_EDP));
8036 if (tmp & TRANS_DDI_FUNC_ENABLE) {
8037 enum pipe trans_edp_pipe;
8038 switch (tmp & TRANS_DDI_EDP_INPUT_MASK) {
8040 WARN(1, "unknown pipe linked to edp transcoder\n");
8041 case TRANS_DDI_EDP_INPUT_A_ONOFF:
8042 case TRANS_DDI_EDP_INPUT_A_ON:
8043 trans_edp_pipe = PIPE_A;
8045 case TRANS_DDI_EDP_INPUT_B_ONOFF:
8046 trans_edp_pipe = PIPE_B;
8048 case TRANS_DDI_EDP_INPUT_C_ONOFF:
8049 trans_edp_pipe = PIPE_C;
8053 if (trans_edp_pipe == crtc->pipe)
8054 pipe_config->cpu_transcoder = TRANSCODER_EDP;
8057 if (!intel_display_power_is_enabled(dev_priv,
8058 POWER_DOMAIN_TRANSCODER(pipe_config->cpu_transcoder)))
8061 tmp = I915_READ(PIPECONF(pipe_config->cpu_transcoder));
8062 if (!(tmp & PIPECONF_ENABLE))
8065 haswell_get_ddi_port_state(crtc, pipe_config);
8067 intel_get_pipe_timings(crtc, pipe_config);
8069 pfit_domain = POWER_DOMAIN_PIPE_PANEL_FITTER(crtc->pipe);
8070 if (intel_display_power_is_enabled(dev_priv, pfit_domain))
8071 ironlake_get_pfit_config(crtc, pipe_config);
8073 if (IS_HASWELL(dev))
8074 pipe_config->ips_enabled = hsw_crtc_supports_ips(crtc) &&
8075 (I915_READ(IPS_CTL) & IPS_ENABLE);
8077 if (pipe_config->cpu_transcoder != TRANSCODER_EDP) {
8078 pipe_config->pixel_multiplier =
8079 I915_READ(PIPE_MULT(pipe_config->cpu_transcoder)) + 1;
8081 pipe_config->pixel_multiplier = 1;
8087 static void i845_update_cursor(struct drm_crtc *crtc, u32 base)
8089 struct drm_device *dev = crtc->dev;
8090 struct drm_i915_private *dev_priv = dev->dev_private;
8091 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
8092 uint32_t cntl = 0, size = 0;
8095 unsigned int width = intel_crtc->cursor_width;
8096 unsigned int height = intel_crtc->cursor_height;
8097 unsigned int stride = roundup_pow_of_two(width) * 4;
8101 WARN_ONCE(1, "Invalid cursor width/stride, width=%u, stride=%u\n",
8112 cntl |= CURSOR_ENABLE |
8113 CURSOR_GAMMA_ENABLE |
8114 CURSOR_FORMAT_ARGB |
8115 CURSOR_STRIDE(stride);
8117 size = (height << 12) | width;
8120 if (intel_crtc->cursor_cntl != 0 &&
8121 (intel_crtc->cursor_base != base ||
8122 intel_crtc->cursor_size != size ||
8123 intel_crtc->cursor_cntl != cntl)) {
8124 /* On these chipsets we can only modify the base/size/stride
8125 * whilst the cursor is disabled.
8127 I915_WRITE(_CURACNTR, 0);
8128 POSTING_READ(_CURACNTR);
8129 intel_crtc->cursor_cntl = 0;
8132 if (intel_crtc->cursor_base != base) {
8133 I915_WRITE(_CURABASE, base);
8134 intel_crtc->cursor_base = base;
8137 if (intel_crtc->cursor_size != size) {
8138 I915_WRITE(CURSIZE, size);
8139 intel_crtc->cursor_size = size;
8142 if (intel_crtc->cursor_cntl != cntl) {
8143 I915_WRITE(_CURACNTR, cntl);
8144 POSTING_READ(_CURACNTR);
8145 intel_crtc->cursor_cntl = cntl;
8149 static void i9xx_update_cursor(struct drm_crtc *crtc, u32 base)
8151 struct drm_device *dev = crtc->dev;
8152 struct drm_i915_private *dev_priv = dev->dev_private;
8153 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
8154 int pipe = intel_crtc->pipe;
8159 cntl = MCURSOR_GAMMA_ENABLE;
8160 switch (intel_crtc->cursor_width) {
8162 cntl |= CURSOR_MODE_64_ARGB_AX;
8165 cntl |= CURSOR_MODE_128_ARGB_AX;
8168 cntl |= CURSOR_MODE_256_ARGB_AX;
8174 cntl |= pipe << 28; /* Connect to correct pipe */
8176 if (IS_HASWELL(dev) || IS_BROADWELL(dev))
8177 cntl |= CURSOR_PIPE_CSC_ENABLE;
8180 if (to_intel_plane(crtc->cursor)->rotation == BIT(DRM_ROTATE_180))
8181 cntl |= CURSOR_ROTATE_180;
8183 if (intel_crtc->cursor_cntl != cntl) {
8184 I915_WRITE(CURCNTR(pipe), cntl);
8185 POSTING_READ(CURCNTR(pipe));
8186 intel_crtc->cursor_cntl = cntl;
8189 /* and commit changes on next vblank */
8190 I915_WRITE(CURBASE(pipe), base);
8191 POSTING_READ(CURBASE(pipe));
8193 intel_crtc->cursor_base = base;
8196 /* If no-part of the cursor is visible on the framebuffer, then the GPU may hang... */
8197 static void intel_crtc_update_cursor(struct drm_crtc *crtc,
8200 struct drm_device *dev = crtc->dev;
8201 struct drm_i915_private *dev_priv = dev->dev_private;
8202 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
8203 int pipe = intel_crtc->pipe;
8204 int x = crtc->cursor_x;
8205 int y = crtc->cursor_y;
8206 u32 base = 0, pos = 0;
8209 base = intel_crtc->cursor_addr;
8211 if (x >= intel_crtc->config.pipe_src_w)
8214 if (y >= intel_crtc->config.pipe_src_h)
8218 if (x + intel_crtc->cursor_width <= 0)
8221 pos |= CURSOR_POS_SIGN << CURSOR_X_SHIFT;
8224 pos |= x << CURSOR_X_SHIFT;
8227 if (y + intel_crtc->cursor_height <= 0)
8230 pos |= CURSOR_POS_SIGN << CURSOR_Y_SHIFT;
8233 pos |= y << CURSOR_Y_SHIFT;
8235 if (base == 0 && intel_crtc->cursor_base == 0)
8238 I915_WRITE(CURPOS(pipe), pos);
8240 /* ILK+ do this automagically */
8241 if (HAS_GMCH_DISPLAY(dev) &&
8242 to_intel_plane(crtc->cursor)->rotation == BIT(DRM_ROTATE_180)) {
8243 base += (intel_crtc->cursor_height *
8244 intel_crtc->cursor_width - 1) * 4;
8247 if (IS_845G(dev) || IS_I865G(dev))
8248 i845_update_cursor(crtc, base);
8250 i9xx_update_cursor(crtc, base);
8253 static bool cursor_size_ok(struct drm_device *dev,
8254 uint32_t width, uint32_t height)
8256 if (width == 0 || height == 0)
8260 * 845g/865g are special in that they are only limited by
8261 * the width of their cursors, the height is arbitrary up to
8262 * the precision of the register. Everything else requires
8263 * square cursors, limited to a few power-of-two sizes.
8265 if (IS_845G(dev) || IS_I865G(dev)) {
8266 if ((width & 63) != 0)
8269 if (width > (IS_845G(dev) ? 64 : 512))
8275 switch (width | height) {
8290 static int intel_crtc_cursor_set_obj(struct drm_crtc *crtc,
8291 struct drm_i915_gem_object *obj,
8292 uint32_t width, uint32_t height)
8294 struct drm_device *dev = crtc->dev;
8295 struct drm_i915_private *dev_priv = dev->dev_private;
8296 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
8297 enum pipe pipe = intel_crtc->pipe;
8302 /* if we want to turn off the cursor ignore width and height */
8304 DRM_DEBUG_KMS("cursor off\n");
8306 mutex_lock(&dev->struct_mutex);
8310 /* we only need to pin inside GTT if cursor is non-phy */
8311 mutex_lock(&dev->struct_mutex);
8312 if (!INTEL_INFO(dev)->cursor_needs_physical) {
8316 * Global gtt pte registers are special registers which actually
8317 * forward writes to a chunk of system memory. Which means that
8318 * there is no risk that the register values disappear as soon
8319 * as we call intel_runtime_pm_put(), so it is correct to wrap
8320 * only the pin/unpin/fence and not more.
8322 intel_runtime_pm_get(dev_priv);
8324 /* Note that the w/a also requires 2 PTE of padding following
8325 * the bo. We currently fill all unused PTE with the shadow
8326 * page and so we should always have valid PTE following the
8327 * cursor preventing the VT-d warning.
8330 if (need_vtd_wa(dev))
8331 alignment = 64*1024;
8333 ret = i915_gem_object_pin_to_display_plane(obj, alignment, NULL);
8335 DRM_DEBUG_KMS("failed to move cursor bo into the GTT\n");
8336 intel_runtime_pm_put(dev_priv);
8340 ret = i915_gem_object_put_fence(obj);
8342 DRM_DEBUG_KMS("failed to release fence for cursor");
8343 intel_runtime_pm_put(dev_priv);
8347 addr = i915_gem_obj_ggtt_offset(obj);
8349 intel_runtime_pm_put(dev_priv);
8351 int align = IS_I830(dev) ? 16 * 1024 : 256;
8352 ret = i915_gem_object_attach_phys(obj, align);
8354 DRM_DEBUG_KMS("failed to attach phys object\n");
8357 addr = obj->phys_handle->busaddr;
8361 if (intel_crtc->cursor_bo) {
8362 if (!INTEL_INFO(dev)->cursor_needs_physical)
8363 i915_gem_object_unpin_from_display_plane(intel_crtc->cursor_bo);
8366 i915_gem_track_fb(intel_crtc->cursor_bo, obj,
8367 INTEL_FRONTBUFFER_CURSOR(pipe));
8368 mutex_unlock(&dev->struct_mutex);
8370 old_width = intel_crtc->cursor_width;
8372 intel_crtc->cursor_addr = addr;
8373 intel_crtc->cursor_bo = obj;
8374 intel_crtc->cursor_width = width;
8375 intel_crtc->cursor_height = height;
8377 if (intel_crtc->active) {
8378 if (old_width != width)
8379 intel_update_watermarks(crtc);
8380 intel_crtc_update_cursor(crtc, intel_crtc->cursor_bo != NULL);
8382 intel_frontbuffer_flip(dev, INTEL_FRONTBUFFER_CURSOR(pipe));
8387 i915_gem_object_unpin_from_display_plane(obj);
8389 mutex_unlock(&dev->struct_mutex);
8393 static void intel_crtc_gamma_set(struct drm_crtc *crtc, u16 *red, u16 *green,
8394 u16 *blue, uint32_t start, uint32_t size)
8396 int end = (start + size > 256) ? 256 : start + size, i;
8397 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
8399 for (i = start; i < end; i++) {
8400 intel_crtc->lut_r[i] = red[i] >> 8;
8401 intel_crtc->lut_g[i] = green[i] >> 8;
8402 intel_crtc->lut_b[i] = blue[i] >> 8;
8405 intel_crtc_load_lut(crtc);
8408 /* VESA 640x480x72Hz mode to set on the pipe */
8409 static struct drm_display_mode load_detect_mode = {
8410 DRM_MODE("640x480", DRM_MODE_TYPE_DEFAULT, 31500, 640, 664,
8411 704, 832, 0, 480, 489, 491, 520, 0, DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC),
8414 struct drm_framebuffer *
8415 __intel_framebuffer_create(struct drm_device *dev,
8416 struct drm_mode_fb_cmd2 *mode_cmd,
8417 struct drm_i915_gem_object *obj)
8419 struct intel_framebuffer *intel_fb;
8422 intel_fb = kzalloc(sizeof(*intel_fb), GFP_KERNEL);
8424 drm_gem_object_unreference(&obj->base);
8425 return ERR_PTR(-ENOMEM);
8428 ret = intel_framebuffer_init(dev, intel_fb, mode_cmd, obj);
8432 return &intel_fb->base;
8434 drm_gem_object_unreference(&obj->base);
8437 return ERR_PTR(ret);
8440 static struct drm_framebuffer *
8441 intel_framebuffer_create(struct drm_device *dev,
8442 struct drm_mode_fb_cmd2 *mode_cmd,
8443 struct drm_i915_gem_object *obj)
8445 struct drm_framebuffer *fb;
8448 ret = i915_mutex_lock_interruptible(dev);
8450 return ERR_PTR(ret);
8451 fb = __intel_framebuffer_create(dev, mode_cmd, obj);
8452 mutex_unlock(&dev->struct_mutex);
8458 intel_framebuffer_pitch_for_width(int width, int bpp)
8460 u32 pitch = DIV_ROUND_UP(width * bpp, 8);
8461 return ALIGN(pitch, 64);
8465 intel_framebuffer_size_for_mode(struct drm_display_mode *mode, int bpp)
8467 u32 pitch = intel_framebuffer_pitch_for_width(mode->hdisplay, bpp);
8468 return PAGE_ALIGN(pitch * mode->vdisplay);
8471 static struct drm_framebuffer *
8472 intel_framebuffer_create_for_mode(struct drm_device *dev,
8473 struct drm_display_mode *mode,
8476 struct drm_i915_gem_object *obj;
8477 struct drm_mode_fb_cmd2 mode_cmd = { 0 };
8479 obj = i915_gem_alloc_object(dev,
8480 intel_framebuffer_size_for_mode(mode, bpp));
8482 return ERR_PTR(-ENOMEM);
8484 mode_cmd.width = mode->hdisplay;
8485 mode_cmd.height = mode->vdisplay;
8486 mode_cmd.pitches[0] = intel_framebuffer_pitch_for_width(mode_cmd.width,
8488 mode_cmd.pixel_format = drm_mode_legacy_fb_format(bpp, depth);
8490 return intel_framebuffer_create(dev, &mode_cmd, obj);
8493 static struct drm_framebuffer *
8494 mode_fits_in_fbdev(struct drm_device *dev,
8495 struct drm_display_mode *mode)
8497 #ifdef CONFIG_DRM_I915_FBDEV
8498 struct drm_i915_private *dev_priv = dev->dev_private;
8499 struct drm_i915_gem_object *obj;
8500 struct drm_framebuffer *fb;
8502 if (!dev_priv->fbdev)
8505 if (!dev_priv->fbdev->fb)
8508 obj = dev_priv->fbdev->fb->obj;
8511 fb = &dev_priv->fbdev->fb->base;
8512 if (fb->pitches[0] < intel_framebuffer_pitch_for_width(mode->hdisplay,
8513 fb->bits_per_pixel))
8516 if (obj->base.size < mode->vdisplay * fb->pitches[0])
8525 bool intel_get_load_detect_pipe(struct drm_connector *connector,
8526 struct drm_display_mode *mode,
8527 struct intel_load_detect_pipe *old,
8528 struct drm_modeset_acquire_ctx *ctx)
8530 struct intel_crtc *intel_crtc;
8531 struct intel_encoder *intel_encoder =
8532 intel_attached_encoder(connector);
8533 struct drm_crtc *possible_crtc;
8534 struct drm_encoder *encoder = &intel_encoder->base;
8535 struct drm_crtc *crtc = NULL;
8536 struct drm_device *dev = encoder->dev;
8537 struct drm_framebuffer *fb;
8538 struct drm_mode_config *config = &dev->mode_config;
8541 DRM_DEBUG_KMS("[CONNECTOR:%d:%s], [ENCODER:%d:%s]\n",
8542 connector->base.id, connector->name,
8543 encoder->base.id, encoder->name);
8546 ret = drm_modeset_lock(&config->connection_mutex, ctx);
8551 * Algorithm gets a little messy:
8553 * - if the connector already has an assigned crtc, use it (but make
8554 * sure it's on first)
8556 * - try to find the first unused crtc that can drive this connector,
8557 * and use that if we find one
8560 /* See if we already have a CRTC for this connector */
8561 if (encoder->crtc) {
8562 crtc = encoder->crtc;
8564 ret = drm_modeset_lock(&crtc->mutex, ctx);
8568 old->dpms_mode = connector->dpms;
8569 old->load_detect_temp = false;
8571 /* Make sure the crtc and connector are running */
8572 if (connector->dpms != DRM_MODE_DPMS_ON)
8573 connector->funcs->dpms(connector, DRM_MODE_DPMS_ON);
8578 /* Find an unused one (if possible) */
8579 for_each_crtc(dev, possible_crtc) {
8581 if (!(encoder->possible_crtcs & (1 << i)))
8583 if (possible_crtc->enabled)
8585 /* This can occur when applying the pipe A quirk on resume. */
8586 if (to_intel_crtc(possible_crtc)->new_enabled)
8589 crtc = possible_crtc;
8594 * If we didn't find an unused CRTC, don't use any.
8597 DRM_DEBUG_KMS("no pipe available for load-detect\n");
8601 ret = drm_modeset_lock(&crtc->mutex, ctx);
8604 intel_encoder->new_crtc = to_intel_crtc(crtc);
8605 to_intel_connector(connector)->new_encoder = intel_encoder;
8607 intel_crtc = to_intel_crtc(crtc);
8608 intel_crtc->new_enabled = true;
8609 intel_crtc->new_config = &intel_crtc->config;
8610 old->dpms_mode = connector->dpms;
8611 old->load_detect_temp = true;
8612 old->release_fb = NULL;
8615 mode = &load_detect_mode;
8617 /* We need a framebuffer large enough to accommodate all accesses
8618 * that the plane may generate whilst we perform load detection.
8619 * We can not rely on the fbcon either being present (we get called
8620 * during its initialisation to detect all boot displays, or it may
8621 * not even exist) or that it is large enough to satisfy the
8624 fb = mode_fits_in_fbdev(dev, mode);
8626 DRM_DEBUG_KMS("creating tmp fb for load-detection\n");
8627 fb = intel_framebuffer_create_for_mode(dev, mode, 24, 32);
8628 old->release_fb = fb;
8630 DRM_DEBUG_KMS("reusing fbdev for load-detection framebuffer\n");
8632 DRM_DEBUG_KMS("failed to allocate framebuffer for load-detection\n");
8636 if (intel_set_mode(crtc, mode, 0, 0, fb)) {
8637 DRM_DEBUG_KMS("failed to set mode on load-detect pipe\n");
8638 if (old->release_fb)
8639 old->release_fb->funcs->destroy(old->release_fb);
8643 /* let the connector get through one full cycle before testing */
8644 intel_wait_for_vblank(dev, intel_crtc->pipe);
8648 intel_crtc->new_enabled = crtc->enabled;
8649 if (intel_crtc->new_enabled)
8650 intel_crtc->new_config = &intel_crtc->config;
8652 intel_crtc->new_config = NULL;
8654 if (ret == -EDEADLK) {
8655 drm_modeset_backoff(ctx);
8662 void intel_release_load_detect_pipe(struct drm_connector *connector,
8663 struct intel_load_detect_pipe *old)
8665 struct intel_encoder *intel_encoder =
8666 intel_attached_encoder(connector);
8667 struct drm_encoder *encoder = &intel_encoder->base;
8668 struct drm_crtc *crtc = encoder->crtc;
8669 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
8671 DRM_DEBUG_KMS("[CONNECTOR:%d:%s], [ENCODER:%d:%s]\n",
8672 connector->base.id, connector->name,
8673 encoder->base.id, encoder->name);
8675 if (old->load_detect_temp) {
8676 to_intel_connector(connector)->new_encoder = NULL;
8677 intel_encoder->new_crtc = NULL;
8678 intel_crtc->new_enabled = false;
8679 intel_crtc->new_config = NULL;
8680 intel_set_mode(crtc, NULL, 0, 0, NULL);
8682 if (old->release_fb) {
8683 drm_framebuffer_unregister_private(old->release_fb);
8684 drm_framebuffer_unreference(old->release_fb);
8690 /* Switch crtc and encoder back off if necessary */
8691 if (old->dpms_mode != DRM_MODE_DPMS_ON)
8692 connector->funcs->dpms(connector, old->dpms_mode);
8695 static int i9xx_pll_refclk(struct drm_device *dev,
8696 const struct intel_crtc_config *pipe_config)
8698 struct drm_i915_private *dev_priv = dev->dev_private;
8699 u32 dpll = pipe_config->dpll_hw_state.dpll;
8701 if ((dpll & PLL_REF_INPUT_MASK) == PLLB_REF_INPUT_SPREADSPECTRUMIN)
8702 return dev_priv->vbt.lvds_ssc_freq;
8703 else if (HAS_PCH_SPLIT(dev))
8705 else if (!IS_GEN2(dev))
8711 /* Returns the clock of the currently programmed mode of the given pipe. */
8712 static void i9xx_crtc_clock_get(struct intel_crtc *crtc,
8713 struct intel_crtc_config *pipe_config)
8715 struct drm_device *dev = crtc->base.dev;
8716 struct drm_i915_private *dev_priv = dev->dev_private;
8717 int pipe = pipe_config->cpu_transcoder;
8718 u32 dpll = pipe_config->dpll_hw_state.dpll;
8720 intel_clock_t clock;
8721 int refclk = i9xx_pll_refclk(dev, pipe_config);
8723 if ((dpll & DISPLAY_RATE_SELECT_FPA1) == 0)
8724 fp = pipe_config->dpll_hw_state.fp0;
8726 fp = pipe_config->dpll_hw_state.fp1;
8728 clock.m1 = (fp & FP_M1_DIV_MASK) >> FP_M1_DIV_SHIFT;
8729 if (IS_PINEVIEW(dev)) {
8730 clock.n = ffs((fp & FP_N_PINEVIEW_DIV_MASK) >> FP_N_DIV_SHIFT) - 1;
8731 clock.m2 = (fp & FP_M2_PINEVIEW_DIV_MASK) >> FP_M2_DIV_SHIFT;
8733 clock.n = (fp & FP_N_DIV_MASK) >> FP_N_DIV_SHIFT;
8734 clock.m2 = (fp & FP_M2_DIV_MASK) >> FP_M2_DIV_SHIFT;
8737 if (!IS_GEN2(dev)) {
8738 if (IS_PINEVIEW(dev))
8739 clock.p1 = ffs((dpll & DPLL_FPA01_P1_POST_DIV_MASK_PINEVIEW) >>
8740 DPLL_FPA01_P1_POST_DIV_SHIFT_PINEVIEW);
8742 clock.p1 = ffs((dpll & DPLL_FPA01_P1_POST_DIV_MASK) >>
8743 DPLL_FPA01_P1_POST_DIV_SHIFT);
8745 switch (dpll & DPLL_MODE_MASK) {
8746 case DPLLB_MODE_DAC_SERIAL:
8747 clock.p2 = dpll & DPLL_DAC_SERIAL_P2_CLOCK_DIV_5 ?
8750 case DPLLB_MODE_LVDS:
8751 clock.p2 = dpll & DPLLB_LVDS_P2_CLOCK_DIV_7 ?
8755 DRM_DEBUG_KMS("Unknown DPLL mode %08x in programmed "
8756 "mode\n", (int)(dpll & DPLL_MODE_MASK));
8760 if (IS_PINEVIEW(dev))
8761 pineview_clock(refclk, &clock);
8763 i9xx_clock(refclk, &clock);
8765 u32 lvds = IS_I830(dev) ? 0 : I915_READ(LVDS);
8766 bool is_lvds = (pipe == 1) && (lvds & LVDS_PORT_EN);
8769 clock.p1 = ffs((dpll & DPLL_FPA01_P1_POST_DIV_MASK_I830_LVDS) >>
8770 DPLL_FPA01_P1_POST_DIV_SHIFT);
8772 if (lvds & LVDS_CLKB_POWER_UP)
8777 if (dpll & PLL_P1_DIVIDE_BY_TWO)
8780 clock.p1 = ((dpll & DPLL_FPA01_P1_POST_DIV_MASK_I830) >>
8781 DPLL_FPA01_P1_POST_DIV_SHIFT) + 2;
8783 if (dpll & PLL_P2_DIVIDE_BY_4)
8789 i9xx_clock(refclk, &clock);
8793 * This value includes pixel_multiplier. We will use
8794 * port_clock to compute adjusted_mode.crtc_clock in the
8795 * encoder's get_config() function.
8797 pipe_config->port_clock = clock.dot;
8800 int intel_dotclock_calculate(int link_freq,
8801 const struct intel_link_m_n *m_n)
8804 * The calculation for the data clock is:
8805 * pixel_clock = ((m/n)*(link_clock * nr_lanes))/bpp
8806 * But we want to avoid losing precison if possible, so:
8807 * pixel_clock = ((m * link_clock * nr_lanes)/(n*bpp))
8809 * and the link clock is simpler:
8810 * link_clock = (m * link_clock) / n
8816 return div_u64((u64)m_n->link_m * link_freq, m_n->link_n);
8819 static void ironlake_pch_clock_get(struct intel_crtc *crtc,
8820 struct intel_crtc_config *pipe_config)
8822 struct drm_device *dev = crtc->base.dev;
8824 /* read out port_clock from the DPLL */
8825 i9xx_crtc_clock_get(crtc, pipe_config);
8828 * This value does not include pixel_multiplier.
8829 * We will check that port_clock and adjusted_mode.crtc_clock
8830 * agree once we know their relationship in the encoder's
8831 * get_config() function.
8833 pipe_config->adjusted_mode.crtc_clock =
8834 intel_dotclock_calculate(intel_fdi_link_freq(dev) * 10000,
8835 &pipe_config->fdi_m_n);
8838 /** Returns the currently programmed mode of the given pipe. */
8839 struct drm_display_mode *intel_crtc_mode_get(struct drm_device *dev,
8840 struct drm_crtc *crtc)
8842 struct drm_i915_private *dev_priv = dev->dev_private;
8843 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
8844 enum transcoder cpu_transcoder = intel_crtc->config.cpu_transcoder;
8845 struct drm_display_mode *mode;
8846 struct intel_crtc_config pipe_config;
8847 int htot = I915_READ(HTOTAL(cpu_transcoder));
8848 int hsync = I915_READ(HSYNC(cpu_transcoder));
8849 int vtot = I915_READ(VTOTAL(cpu_transcoder));
8850 int vsync = I915_READ(VSYNC(cpu_transcoder));
8851 enum pipe pipe = intel_crtc->pipe;
8853 mode = kzalloc(sizeof(*mode), GFP_KERNEL);
8858 * Construct a pipe_config sufficient for getting the clock info
8859 * back out of crtc_clock_get.
8861 * Note, if LVDS ever uses a non-1 pixel multiplier, we'll need
8862 * to use a real value here instead.
8864 pipe_config.cpu_transcoder = (enum transcoder) pipe;
8865 pipe_config.pixel_multiplier = 1;
8866 pipe_config.dpll_hw_state.dpll = I915_READ(DPLL(pipe));
8867 pipe_config.dpll_hw_state.fp0 = I915_READ(FP0(pipe));
8868 pipe_config.dpll_hw_state.fp1 = I915_READ(FP1(pipe));
8869 i9xx_crtc_clock_get(intel_crtc, &pipe_config);
8871 mode->clock = pipe_config.port_clock / pipe_config.pixel_multiplier;
8872 mode->hdisplay = (htot & 0xffff) + 1;
8873 mode->htotal = ((htot & 0xffff0000) >> 16) + 1;
8874 mode->hsync_start = (hsync & 0xffff) + 1;
8875 mode->hsync_end = ((hsync & 0xffff0000) >> 16) + 1;
8876 mode->vdisplay = (vtot & 0xffff) + 1;
8877 mode->vtotal = ((vtot & 0xffff0000) >> 16) + 1;
8878 mode->vsync_start = (vsync & 0xffff) + 1;
8879 mode->vsync_end = ((vsync & 0xffff0000) >> 16) + 1;
8881 drm_mode_set_name(mode);
8886 static void intel_decrease_pllclock(struct drm_crtc *crtc)
8888 struct drm_device *dev = crtc->dev;
8889 struct drm_i915_private *dev_priv = dev->dev_private;
8890 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
8892 if (!HAS_GMCH_DISPLAY(dev))
8895 if (!dev_priv->lvds_downclock_avail)
8899 * Since this is called by a timer, we should never get here in
8902 if (!HAS_PIPE_CXSR(dev) && intel_crtc->lowfreq_avail) {
8903 int pipe = intel_crtc->pipe;
8904 int dpll_reg = DPLL(pipe);
8907 DRM_DEBUG_DRIVER("downclocking LVDS\n");
8909 assert_panel_unlocked(dev_priv, pipe);
8911 dpll = I915_READ(dpll_reg);
8912 dpll |= DISPLAY_RATE_SELECT_FPA1;
8913 I915_WRITE(dpll_reg, dpll);
8914 intel_wait_for_vblank(dev, pipe);
8915 dpll = I915_READ(dpll_reg);
8916 if (!(dpll & DISPLAY_RATE_SELECT_FPA1))
8917 DRM_DEBUG_DRIVER("failed to downclock LVDS!\n");
8922 void intel_mark_busy(struct drm_device *dev)
8924 struct drm_i915_private *dev_priv = dev->dev_private;
8926 if (dev_priv->mm.busy)
8929 intel_runtime_pm_get(dev_priv);
8930 i915_update_gfx_val(dev_priv);
8931 dev_priv->mm.busy = true;
8934 void intel_mark_idle(struct drm_device *dev)
8936 struct drm_i915_private *dev_priv = dev->dev_private;
8937 struct drm_crtc *crtc;
8939 if (!dev_priv->mm.busy)
8942 dev_priv->mm.busy = false;
8944 if (!i915.powersave)
8947 for_each_crtc(dev, crtc) {
8948 if (!crtc->primary->fb)
8951 intel_decrease_pllclock(crtc);
8954 if (INTEL_INFO(dev)->gen >= 6)
8955 gen6_rps_idle(dev->dev_private);
8958 intel_runtime_pm_put(dev_priv);
8961 static void intel_crtc_destroy(struct drm_crtc *crtc)
8963 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
8964 struct drm_device *dev = crtc->dev;
8965 struct intel_unpin_work *work;
8967 spin_lock_irq(&dev->event_lock);
8968 work = intel_crtc->unpin_work;
8969 intel_crtc->unpin_work = NULL;
8970 spin_unlock_irq(&dev->event_lock);
8973 cancel_work_sync(&work->work);
8977 drm_crtc_cleanup(crtc);
8982 static void intel_unpin_work_fn(struct work_struct *__work)
8984 struct intel_unpin_work *work =
8985 container_of(__work, struct intel_unpin_work, work);
8986 struct drm_device *dev = work->crtc->dev;
8987 enum pipe pipe = to_intel_crtc(work->crtc)->pipe;
8989 mutex_lock(&dev->struct_mutex);
8990 intel_unpin_fb_obj(work->old_fb_obj);
8991 drm_gem_object_unreference(&work->pending_flip_obj->base);
8992 drm_gem_object_unreference(&work->old_fb_obj->base);
8994 intel_update_fbc(dev);
8995 mutex_unlock(&dev->struct_mutex);
8997 intel_frontbuffer_flip_complete(dev, INTEL_FRONTBUFFER_PRIMARY(pipe));
8999 BUG_ON(atomic_read(&to_intel_crtc(work->crtc)->unpin_work_count) == 0);
9000 atomic_dec(&to_intel_crtc(work->crtc)->unpin_work_count);
9005 static void do_intel_finish_page_flip(struct drm_device *dev,
9006 struct drm_crtc *crtc)
9008 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
9009 struct intel_unpin_work *work;
9010 unsigned long flags;
9012 /* Ignore early vblank irqs */
9013 if (intel_crtc == NULL)
9017 * This is called both by irq handlers and the reset code (to complete
9018 * lost pageflips) so needs the full irqsave spinlocks.
9020 spin_lock_irqsave(&dev->event_lock, flags);
9021 work = intel_crtc->unpin_work;
9023 /* Ensure we don't miss a work->pending update ... */
9026 if (work == NULL || atomic_read(&work->pending) < INTEL_FLIP_COMPLETE) {
9027 spin_unlock_irqrestore(&dev->event_lock, flags);
9031 page_flip_completed(intel_crtc);
9033 spin_unlock_irqrestore(&dev->event_lock, flags);
9036 void intel_finish_page_flip(struct drm_device *dev, int pipe)
9038 struct drm_i915_private *dev_priv = dev->dev_private;
9039 struct drm_crtc *crtc = dev_priv->pipe_to_crtc_mapping[pipe];
9041 do_intel_finish_page_flip(dev, crtc);
9044 void intel_finish_page_flip_plane(struct drm_device *dev, int plane)
9046 struct drm_i915_private *dev_priv = dev->dev_private;
9047 struct drm_crtc *crtc = dev_priv->plane_to_crtc_mapping[plane];
9049 do_intel_finish_page_flip(dev, crtc);
9052 /* Is 'a' after or equal to 'b'? */
9053 static bool g4x_flip_count_after_eq(u32 a, u32 b)
9055 return !((a - b) & 0x80000000);
9058 static bool page_flip_finished(struct intel_crtc *crtc)
9060 struct drm_device *dev = crtc->base.dev;
9061 struct drm_i915_private *dev_priv = dev->dev_private;
9064 * The relevant registers doen't exist on pre-ctg.
9065 * As the flip done interrupt doesn't trigger for mmio
9066 * flips on gmch platforms, a flip count check isn't
9067 * really needed there. But since ctg has the registers,
9068 * include it in the check anyway.
9070 if (INTEL_INFO(dev)->gen < 5 && !IS_G4X(dev))
9074 * A DSPSURFLIVE check isn't enough in case the mmio and CS flips
9075 * used the same base address. In that case the mmio flip might
9076 * have completed, but the CS hasn't even executed the flip yet.
9078 * A flip count check isn't enough as the CS might have updated
9079 * the base address just after start of vblank, but before we
9080 * managed to process the interrupt. This means we'd complete the
9083 * Combining both checks should get us a good enough result. It may
9084 * still happen that the CS flip has been executed, but has not
9085 * yet actually completed. But in case the base address is the same
9086 * anyway, we don't really care.
9088 return (I915_READ(DSPSURFLIVE(crtc->plane)) & ~0xfff) ==
9089 crtc->unpin_work->gtt_offset &&
9090 g4x_flip_count_after_eq(I915_READ(PIPE_FLIPCOUNT_GM45(crtc->pipe)),
9091 crtc->unpin_work->flip_count);
9094 void intel_prepare_page_flip(struct drm_device *dev, int plane)
9096 struct drm_i915_private *dev_priv = dev->dev_private;
9097 struct intel_crtc *intel_crtc =
9098 to_intel_crtc(dev_priv->plane_to_crtc_mapping[plane]);
9099 unsigned long flags;
9103 * This is called both by irq handlers and the reset code (to complete
9104 * lost pageflips) so needs the full irqsave spinlocks.
9106 * NB: An MMIO update of the plane base pointer will also
9107 * generate a page-flip completion irq, i.e. every modeset
9108 * is also accompanied by a spurious intel_prepare_page_flip().
9110 spin_lock_irqsave(&dev->event_lock, flags);
9111 if (intel_crtc->unpin_work && page_flip_finished(intel_crtc))
9112 atomic_inc_not_zero(&intel_crtc->unpin_work->pending);
9113 spin_unlock_irqrestore(&dev->event_lock, flags);
9116 static inline void intel_mark_page_flip_active(struct intel_crtc *intel_crtc)
9118 /* Ensure that the work item is consistent when activating it ... */
9120 atomic_set(&intel_crtc->unpin_work->pending, INTEL_FLIP_PENDING);
9121 /* and that it is marked active as soon as the irq could fire. */
9125 static int intel_gen2_queue_flip(struct drm_device *dev,
9126 struct drm_crtc *crtc,
9127 struct drm_framebuffer *fb,
9128 struct drm_i915_gem_object *obj,
9129 struct intel_engine_cs *ring,
9132 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
9136 ret = intel_ring_begin(ring, 6);
9140 /* Can't queue multiple flips, so wait for the previous
9141 * one to finish before executing the next.
9143 if (intel_crtc->plane)
9144 flip_mask = MI_WAIT_FOR_PLANE_B_FLIP;
9146 flip_mask = MI_WAIT_FOR_PLANE_A_FLIP;
9147 intel_ring_emit(ring, MI_WAIT_FOR_EVENT | flip_mask);
9148 intel_ring_emit(ring, MI_NOOP);
9149 intel_ring_emit(ring, MI_DISPLAY_FLIP |
9150 MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
9151 intel_ring_emit(ring, fb->pitches[0]);
9152 intel_ring_emit(ring, intel_crtc->unpin_work->gtt_offset);
9153 intel_ring_emit(ring, 0); /* aux display base address, unused */
9155 intel_mark_page_flip_active(intel_crtc);
9156 __intel_ring_advance(ring);
9160 static int intel_gen3_queue_flip(struct drm_device *dev,
9161 struct drm_crtc *crtc,
9162 struct drm_framebuffer *fb,
9163 struct drm_i915_gem_object *obj,
9164 struct intel_engine_cs *ring,
9167 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
9171 ret = intel_ring_begin(ring, 6);
9175 if (intel_crtc->plane)
9176 flip_mask = MI_WAIT_FOR_PLANE_B_FLIP;
9178 flip_mask = MI_WAIT_FOR_PLANE_A_FLIP;
9179 intel_ring_emit(ring, MI_WAIT_FOR_EVENT | flip_mask);
9180 intel_ring_emit(ring, MI_NOOP);
9181 intel_ring_emit(ring, MI_DISPLAY_FLIP_I915 |
9182 MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
9183 intel_ring_emit(ring, fb->pitches[0]);
9184 intel_ring_emit(ring, intel_crtc->unpin_work->gtt_offset);
9185 intel_ring_emit(ring, MI_NOOP);
9187 intel_mark_page_flip_active(intel_crtc);
9188 __intel_ring_advance(ring);
9192 static int intel_gen4_queue_flip(struct drm_device *dev,
9193 struct drm_crtc *crtc,
9194 struct drm_framebuffer *fb,
9195 struct drm_i915_gem_object *obj,
9196 struct intel_engine_cs *ring,
9199 struct drm_i915_private *dev_priv = dev->dev_private;
9200 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
9201 uint32_t pf, pipesrc;
9204 ret = intel_ring_begin(ring, 4);
9208 /* i965+ uses the linear or tiled offsets from the
9209 * Display Registers (which do not change across a page-flip)
9210 * so we need only reprogram the base address.
9212 intel_ring_emit(ring, MI_DISPLAY_FLIP |
9213 MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
9214 intel_ring_emit(ring, fb->pitches[0]);
9215 intel_ring_emit(ring, intel_crtc->unpin_work->gtt_offset |
9218 /* XXX Enabling the panel-fitter across page-flip is so far
9219 * untested on non-native modes, so ignore it for now.
9220 * pf = I915_READ(pipe == 0 ? PFA_CTL_1 : PFB_CTL_1) & PF_ENABLE;
9223 pipesrc = I915_READ(PIPESRC(intel_crtc->pipe)) & 0x0fff0fff;
9224 intel_ring_emit(ring, pf | pipesrc);
9226 intel_mark_page_flip_active(intel_crtc);
9227 __intel_ring_advance(ring);
9231 static int intel_gen6_queue_flip(struct drm_device *dev,
9232 struct drm_crtc *crtc,
9233 struct drm_framebuffer *fb,
9234 struct drm_i915_gem_object *obj,
9235 struct intel_engine_cs *ring,
9238 struct drm_i915_private *dev_priv = dev->dev_private;
9239 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
9240 uint32_t pf, pipesrc;
9243 ret = intel_ring_begin(ring, 4);
9247 intel_ring_emit(ring, MI_DISPLAY_FLIP |
9248 MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
9249 intel_ring_emit(ring, fb->pitches[0] | obj->tiling_mode);
9250 intel_ring_emit(ring, intel_crtc->unpin_work->gtt_offset);
9252 /* Contrary to the suggestions in the documentation,
9253 * "Enable Panel Fitter" does not seem to be required when page
9254 * flipping with a non-native mode, and worse causes a normal
9256 * pf = I915_READ(PF_CTL(intel_crtc->pipe)) & PF_ENABLE;
9259 pipesrc = I915_READ(PIPESRC(intel_crtc->pipe)) & 0x0fff0fff;
9260 intel_ring_emit(ring, pf | pipesrc);
9262 intel_mark_page_flip_active(intel_crtc);
9263 __intel_ring_advance(ring);
9267 static int intel_gen7_queue_flip(struct drm_device *dev,
9268 struct drm_crtc *crtc,
9269 struct drm_framebuffer *fb,
9270 struct drm_i915_gem_object *obj,
9271 struct intel_engine_cs *ring,
9274 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
9275 uint32_t plane_bit = 0;
9278 switch (intel_crtc->plane) {
9280 plane_bit = MI_DISPLAY_FLIP_IVB_PLANE_A;
9283 plane_bit = MI_DISPLAY_FLIP_IVB_PLANE_B;
9286 plane_bit = MI_DISPLAY_FLIP_IVB_PLANE_C;
9289 WARN_ONCE(1, "unknown plane in flip command\n");
9294 if (ring->id == RCS) {
9297 * On Gen 8, SRM is now taking an extra dword to accommodate
9298 * 48bits addresses, and we need a NOOP for the batch size to
9306 * BSpec MI_DISPLAY_FLIP for IVB:
9307 * "The full packet must be contained within the same cache line."
9309 * Currently the LRI+SRM+MI_DISPLAY_FLIP all fit within the same
9310 * cacheline, if we ever start emitting more commands before
9311 * the MI_DISPLAY_FLIP we may need to first emit everything else,
9312 * then do the cacheline alignment, and finally emit the
9315 ret = intel_ring_cacheline_align(ring);
9319 ret = intel_ring_begin(ring, len);
9323 /* Unmask the flip-done completion message. Note that the bspec says that
9324 * we should do this for both the BCS and RCS, and that we must not unmask
9325 * more than one flip event at any time (or ensure that one flip message
9326 * can be sent by waiting for flip-done prior to queueing new flips).
9327 * Experimentation says that BCS works despite DERRMR masking all
9328 * flip-done completion events and that unmasking all planes at once
9329 * for the RCS also doesn't appear to drop events. Setting the DERRMR
9330 * to zero does lead to lockups within MI_DISPLAY_FLIP.
9332 if (ring->id == RCS) {
9333 intel_ring_emit(ring, MI_LOAD_REGISTER_IMM(1));
9334 intel_ring_emit(ring, DERRMR);
9335 intel_ring_emit(ring, ~(DERRMR_PIPEA_PRI_FLIP_DONE |
9336 DERRMR_PIPEB_PRI_FLIP_DONE |
9337 DERRMR_PIPEC_PRI_FLIP_DONE));
9339 intel_ring_emit(ring, MI_STORE_REGISTER_MEM_GEN8(1) |
9340 MI_SRM_LRM_GLOBAL_GTT);
9342 intel_ring_emit(ring, MI_STORE_REGISTER_MEM(1) |
9343 MI_SRM_LRM_GLOBAL_GTT);
9344 intel_ring_emit(ring, DERRMR);
9345 intel_ring_emit(ring, ring->scratch.gtt_offset + 256);
9347 intel_ring_emit(ring, 0);
9348 intel_ring_emit(ring, MI_NOOP);
9352 intel_ring_emit(ring, MI_DISPLAY_FLIP_I915 | plane_bit);
9353 intel_ring_emit(ring, (fb->pitches[0] | obj->tiling_mode));
9354 intel_ring_emit(ring, intel_crtc->unpin_work->gtt_offset);
9355 intel_ring_emit(ring, (MI_NOOP));
9357 intel_mark_page_flip_active(intel_crtc);
9358 __intel_ring_advance(ring);
9362 static bool use_mmio_flip(struct intel_engine_cs *ring,
9363 struct drm_i915_gem_object *obj)
9366 * This is not being used for older platforms, because
9367 * non-availability of flip done interrupt forces us to use
9368 * CS flips. Older platforms derive flip done using some clever
9369 * tricks involving the flip_pending status bits and vblank irqs.
9370 * So using MMIO flips there would disrupt this mechanism.
9376 if (INTEL_INFO(ring->dev)->gen < 5)
9379 if (i915.use_mmio_flip < 0)
9381 else if (i915.use_mmio_flip > 0)
9383 else if (i915.enable_execlists)
9386 return ring != obj->ring;
9389 static void intel_do_mmio_flip(struct intel_crtc *intel_crtc)
9391 struct drm_device *dev = intel_crtc->base.dev;
9392 struct drm_i915_private *dev_priv = dev->dev_private;
9393 struct intel_framebuffer *intel_fb =
9394 to_intel_framebuffer(intel_crtc->base.primary->fb);
9395 struct drm_i915_gem_object *obj = intel_fb->obj;
9397 u32 start_vbl_count;
9401 intel_mark_page_flip_active(intel_crtc);
9403 atomic_update = intel_pipe_update_start(intel_crtc, &start_vbl_count);
9405 reg = DSPCNTR(intel_crtc->plane);
9406 dspcntr = I915_READ(reg);
9408 if (obj->tiling_mode != I915_TILING_NONE)
9409 dspcntr |= DISPPLANE_TILED;
9411 dspcntr &= ~DISPPLANE_TILED;
9413 I915_WRITE(reg, dspcntr);
9415 I915_WRITE(DSPSURF(intel_crtc->plane),
9416 intel_crtc->unpin_work->gtt_offset);
9417 POSTING_READ(DSPSURF(intel_crtc->plane));
9420 intel_pipe_update_end(intel_crtc, start_vbl_count);
9423 static void intel_mmio_flip_work_func(struct work_struct *work)
9425 struct intel_crtc *intel_crtc =
9426 container_of(work, struct intel_crtc, mmio_flip.work);
9427 struct intel_engine_cs *ring;
9430 seqno = intel_crtc->mmio_flip.seqno;
9431 ring = intel_crtc->mmio_flip.ring;
9434 WARN_ON(__i915_wait_seqno(ring, seqno,
9435 intel_crtc->reset_counter,
9436 false, NULL, NULL) != 0);
9438 intel_do_mmio_flip(intel_crtc);
9441 static int intel_queue_mmio_flip(struct drm_device *dev,
9442 struct drm_crtc *crtc,
9443 struct drm_framebuffer *fb,
9444 struct drm_i915_gem_object *obj,
9445 struct intel_engine_cs *ring,
9448 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
9450 intel_crtc->mmio_flip.seqno = obj->last_write_seqno;
9451 intel_crtc->mmio_flip.ring = obj->ring;
9453 schedule_work(&intel_crtc->mmio_flip.work);
9458 static int intel_default_queue_flip(struct drm_device *dev,
9459 struct drm_crtc *crtc,
9460 struct drm_framebuffer *fb,
9461 struct drm_i915_gem_object *obj,
9462 struct intel_engine_cs *ring,
9468 static bool __intel_pageflip_stall_check(struct drm_device *dev,
9469 struct drm_crtc *crtc)
9471 struct drm_i915_private *dev_priv = dev->dev_private;
9472 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
9473 struct intel_unpin_work *work = intel_crtc->unpin_work;
9476 if (atomic_read(&work->pending) >= INTEL_FLIP_COMPLETE)
9479 if (!work->enable_stall_check)
9482 if (work->flip_ready_vblank == 0) {
9483 if (work->flip_queued_ring &&
9484 !i915_seqno_passed(work->flip_queued_ring->get_seqno(work->flip_queued_ring, true),
9485 work->flip_queued_seqno))
9488 work->flip_ready_vblank = drm_vblank_count(dev, intel_crtc->pipe);
9491 if (drm_vblank_count(dev, intel_crtc->pipe) - work->flip_ready_vblank < 3)
9494 /* Potential stall - if we see that the flip has happened,
9495 * assume a missed interrupt. */
9496 if (INTEL_INFO(dev)->gen >= 4)
9497 addr = I915_HI_DISPBASE(I915_READ(DSPSURF(intel_crtc->plane)));
9499 addr = I915_READ(DSPADDR(intel_crtc->plane));
9501 /* There is a potential issue here with a false positive after a flip
9502 * to the same address. We could address this by checking for a
9503 * non-incrementing frame counter.
9505 return addr == work->gtt_offset;
9508 void intel_check_page_flip(struct drm_device *dev, int pipe)
9510 struct drm_i915_private *dev_priv = dev->dev_private;
9511 struct drm_crtc *crtc = dev_priv->pipe_to_crtc_mapping[pipe];
9512 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
9519 spin_lock(&dev->event_lock);
9520 if (intel_crtc->unpin_work && __intel_pageflip_stall_check(dev, crtc)) {
9521 WARN_ONCE(1, "Kicking stuck page flip: queued at %d, now %d\n",
9522 intel_crtc->unpin_work->flip_queued_vblank, drm_vblank_count(dev, pipe));
9523 page_flip_completed(intel_crtc);
9525 spin_unlock(&dev->event_lock);
9528 static int intel_crtc_page_flip(struct drm_crtc *crtc,
9529 struct drm_framebuffer *fb,
9530 struct drm_pending_vblank_event *event,
9531 uint32_t page_flip_flags)
9533 struct drm_device *dev = crtc->dev;
9534 struct drm_i915_private *dev_priv = dev->dev_private;
9535 struct drm_framebuffer *old_fb = crtc->primary->fb;
9536 struct drm_i915_gem_object *obj = intel_fb_obj(fb);
9537 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
9538 enum pipe pipe = intel_crtc->pipe;
9539 struct intel_unpin_work *work;
9540 struct intel_engine_cs *ring;
9544 * drm_mode_page_flip_ioctl() should already catch this, but double
9545 * check to be safe. In the future we may enable pageflipping from
9546 * a disabled primary plane.
9548 if (WARN_ON(intel_fb_obj(old_fb) == NULL))
9551 /* Can't change pixel format via MI display flips. */
9552 if (fb->pixel_format != crtc->primary->fb->pixel_format)
9556 * TILEOFF/LINOFF registers can't be changed via MI display flips.
9557 * Note that pitch changes could also affect these register.
9559 if (INTEL_INFO(dev)->gen > 3 &&
9560 (fb->offsets[0] != crtc->primary->fb->offsets[0] ||
9561 fb->pitches[0] != crtc->primary->fb->pitches[0]))
9564 if (i915_terminally_wedged(&dev_priv->gpu_error))
9567 work = kzalloc(sizeof(*work), GFP_KERNEL);
9571 work->event = event;
9573 work->old_fb_obj = intel_fb_obj(old_fb);
9574 INIT_WORK(&work->work, intel_unpin_work_fn);
9576 ret = drm_crtc_vblank_get(crtc);
9580 /* We borrow the event spin lock for protecting unpin_work */
9581 spin_lock_irq(&dev->event_lock);
9582 if (intel_crtc->unpin_work) {
9583 /* Before declaring the flip queue wedged, check if
9584 * the hardware completed the operation behind our backs.
9586 if (__intel_pageflip_stall_check(dev, crtc)) {
9587 DRM_DEBUG_DRIVER("flip queue: previous flip completed, continuing\n");
9588 page_flip_completed(intel_crtc);
9590 DRM_DEBUG_DRIVER("flip queue: crtc already busy\n");
9591 spin_unlock_irq(&dev->event_lock);
9593 drm_crtc_vblank_put(crtc);
9598 intel_crtc->unpin_work = work;
9599 spin_unlock_irq(&dev->event_lock);
9601 if (atomic_read(&intel_crtc->unpin_work_count) >= 2)
9602 flush_workqueue(dev_priv->wq);
9604 ret = i915_mutex_lock_interruptible(dev);
9608 /* Reference the objects for the scheduled work. */
9609 drm_gem_object_reference(&work->old_fb_obj->base);
9610 drm_gem_object_reference(&obj->base);
9612 crtc->primary->fb = fb;
9614 work->pending_flip_obj = obj;
9616 atomic_inc(&intel_crtc->unpin_work_count);
9617 intel_crtc->reset_counter = atomic_read(&dev_priv->gpu_error.reset_counter);
9619 if (INTEL_INFO(dev)->gen >= 5 || IS_G4X(dev))
9620 work->flip_count = I915_READ(PIPE_FLIPCOUNT_GM45(pipe)) + 1;
9622 if (IS_VALLEYVIEW(dev)) {
9623 ring = &dev_priv->ring[BCS];
9624 if (obj->tiling_mode != work->old_fb_obj->tiling_mode)
9625 /* vlv: DISPLAY_FLIP fails to change tiling */
9627 } else if (IS_IVYBRIDGE(dev)) {
9628 ring = &dev_priv->ring[BCS];
9629 } else if (INTEL_INFO(dev)->gen >= 7) {
9631 if (ring == NULL || ring->id != RCS)
9632 ring = &dev_priv->ring[BCS];
9634 ring = &dev_priv->ring[RCS];
9637 ret = intel_pin_and_fence_fb_obj(crtc->primary, fb, ring);
9639 goto cleanup_pending;
9642 i915_gem_obj_ggtt_offset(obj) + intel_crtc->dspaddr_offset;
9644 if (use_mmio_flip(ring, obj)) {
9645 ret = intel_queue_mmio_flip(dev, crtc, fb, obj, ring,
9650 work->flip_queued_seqno = obj->last_write_seqno;
9651 work->flip_queued_ring = obj->ring;
9653 ret = dev_priv->display.queue_flip(dev, crtc, fb, obj, ring,
9658 work->flip_queued_seqno = intel_ring_get_seqno(ring);
9659 work->flip_queued_ring = ring;
9662 work->flip_queued_vblank = drm_vblank_count(dev, intel_crtc->pipe);
9663 work->enable_stall_check = true;
9665 i915_gem_track_fb(work->old_fb_obj, obj,
9666 INTEL_FRONTBUFFER_PRIMARY(pipe));
9668 intel_disable_fbc(dev);
9669 intel_frontbuffer_flip_prepare(dev, INTEL_FRONTBUFFER_PRIMARY(pipe));
9670 mutex_unlock(&dev->struct_mutex);
9672 trace_i915_flip_request(intel_crtc->plane, obj);
9677 intel_unpin_fb_obj(obj);
9679 atomic_dec(&intel_crtc->unpin_work_count);
9680 crtc->primary->fb = old_fb;
9681 drm_gem_object_unreference(&work->old_fb_obj->base);
9682 drm_gem_object_unreference(&obj->base);
9683 mutex_unlock(&dev->struct_mutex);
9686 spin_lock_irq(&dev->event_lock);
9687 intel_crtc->unpin_work = NULL;
9688 spin_unlock_irq(&dev->event_lock);
9690 drm_crtc_vblank_put(crtc);
9696 intel_crtc_wait_for_pending_flips(crtc);
9697 ret = intel_pipe_set_base(crtc, crtc->x, crtc->y, fb);
9698 if (ret == 0 && event) {
9699 spin_lock_irq(&dev->event_lock);
9700 drm_send_vblank_event(dev, pipe, event);
9701 spin_unlock_irq(&dev->event_lock);
9707 static struct drm_crtc_helper_funcs intel_helper_funcs = {
9708 .mode_set_base_atomic = intel_pipe_set_base_atomic,
9709 .load_lut = intel_crtc_load_lut,
9713 * intel_modeset_update_staged_output_state
9715 * Updates the staged output configuration state, e.g. after we've read out the
9718 static void intel_modeset_update_staged_output_state(struct drm_device *dev)
9720 struct intel_crtc *crtc;
9721 struct intel_encoder *encoder;
9722 struct intel_connector *connector;
9724 list_for_each_entry(connector, &dev->mode_config.connector_list,
9726 connector->new_encoder =
9727 to_intel_encoder(connector->base.encoder);
9730 for_each_intel_encoder(dev, encoder) {
9732 to_intel_crtc(encoder->base.crtc);
9735 for_each_intel_crtc(dev, crtc) {
9736 crtc->new_enabled = crtc->base.enabled;
9738 if (crtc->new_enabled)
9739 crtc->new_config = &crtc->config;
9741 crtc->new_config = NULL;
9746 * intel_modeset_commit_output_state
9748 * This function copies the stage display pipe configuration to the real one.
9750 static void intel_modeset_commit_output_state(struct drm_device *dev)
9752 struct intel_crtc *crtc;
9753 struct intel_encoder *encoder;
9754 struct intel_connector *connector;
9756 list_for_each_entry(connector, &dev->mode_config.connector_list,
9758 connector->base.encoder = &connector->new_encoder->base;
9761 for_each_intel_encoder(dev, encoder) {
9762 encoder->base.crtc = &encoder->new_crtc->base;
9765 for_each_intel_crtc(dev, crtc) {
9766 crtc->base.enabled = crtc->new_enabled;
9771 connected_sink_compute_bpp(struct intel_connector *connector,
9772 struct intel_crtc_config *pipe_config)
9774 int bpp = pipe_config->pipe_bpp;
9776 DRM_DEBUG_KMS("[CONNECTOR:%d:%s] checking for sink bpp constrains\n",
9777 connector->base.base.id,
9778 connector->base.name);
9780 /* Don't use an invalid EDID bpc value */
9781 if (connector->base.display_info.bpc &&
9782 connector->base.display_info.bpc * 3 < bpp) {
9783 DRM_DEBUG_KMS("clamping display bpp (was %d) to EDID reported max of %d\n",
9784 bpp, connector->base.display_info.bpc*3);
9785 pipe_config->pipe_bpp = connector->base.display_info.bpc*3;
9788 /* Clamp bpp to 8 on screens without EDID 1.4 */
9789 if (connector->base.display_info.bpc == 0 && bpp > 24) {
9790 DRM_DEBUG_KMS("clamping display bpp (was %d) to default limit of 24\n",
9792 pipe_config->pipe_bpp = 24;
9797 compute_baseline_pipe_bpp(struct intel_crtc *crtc,
9798 struct drm_framebuffer *fb,
9799 struct intel_crtc_config *pipe_config)
9801 struct drm_device *dev = crtc->base.dev;
9802 struct intel_connector *connector;
9805 switch (fb->pixel_format) {
9807 bpp = 8*3; /* since we go through a colormap */
9809 case DRM_FORMAT_XRGB1555:
9810 case DRM_FORMAT_ARGB1555:
9811 /* checked in intel_framebuffer_init already */
9812 if (WARN_ON(INTEL_INFO(dev)->gen > 3))
9814 case DRM_FORMAT_RGB565:
9815 bpp = 6*3; /* min is 18bpp */
9817 case DRM_FORMAT_XBGR8888:
9818 case DRM_FORMAT_ABGR8888:
9819 /* checked in intel_framebuffer_init already */
9820 if (WARN_ON(INTEL_INFO(dev)->gen < 4))
9822 case DRM_FORMAT_XRGB8888:
9823 case DRM_FORMAT_ARGB8888:
9826 case DRM_FORMAT_XRGB2101010:
9827 case DRM_FORMAT_ARGB2101010:
9828 case DRM_FORMAT_XBGR2101010:
9829 case DRM_FORMAT_ABGR2101010:
9830 /* checked in intel_framebuffer_init already */
9831 if (WARN_ON(INTEL_INFO(dev)->gen < 4))
9835 /* TODO: gen4+ supports 16 bpc floating point, too. */
9837 DRM_DEBUG_KMS("unsupported depth\n");
9841 pipe_config->pipe_bpp = bpp;
9843 /* Clamp display bpp to EDID value */
9844 list_for_each_entry(connector, &dev->mode_config.connector_list,
9846 if (!connector->new_encoder ||
9847 connector->new_encoder->new_crtc != crtc)
9850 connected_sink_compute_bpp(connector, pipe_config);
9856 static void intel_dump_crtc_timings(const struct drm_display_mode *mode)
9858 DRM_DEBUG_KMS("crtc timings: %d %d %d %d %d %d %d %d %d, "
9859 "type: 0x%x flags: 0x%x\n",
9861 mode->crtc_hdisplay, mode->crtc_hsync_start,
9862 mode->crtc_hsync_end, mode->crtc_htotal,
9863 mode->crtc_vdisplay, mode->crtc_vsync_start,
9864 mode->crtc_vsync_end, mode->crtc_vtotal, mode->type, mode->flags);
9867 static void intel_dump_pipe_config(struct intel_crtc *crtc,
9868 struct intel_crtc_config *pipe_config,
9869 const char *context)
9871 DRM_DEBUG_KMS("[CRTC:%d]%s config for pipe %c\n", crtc->base.base.id,
9872 context, pipe_name(crtc->pipe));
9874 DRM_DEBUG_KMS("cpu_transcoder: %c\n", transcoder_name(pipe_config->cpu_transcoder));
9875 DRM_DEBUG_KMS("pipe bpp: %i, dithering: %i\n",
9876 pipe_config->pipe_bpp, pipe_config->dither);
9877 DRM_DEBUG_KMS("fdi/pch: %i, lanes: %i, gmch_m: %u, gmch_n: %u, link_m: %u, link_n: %u, tu: %u\n",
9878 pipe_config->has_pch_encoder,
9879 pipe_config->fdi_lanes,
9880 pipe_config->fdi_m_n.gmch_m, pipe_config->fdi_m_n.gmch_n,
9881 pipe_config->fdi_m_n.link_m, pipe_config->fdi_m_n.link_n,
9882 pipe_config->fdi_m_n.tu);
9883 DRM_DEBUG_KMS("dp: %i, gmch_m: %u, gmch_n: %u, link_m: %u, link_n: %u, tu: %u\n",
9884 pipe_config->has_dp_encoder,
9885 pipe_config->dp_m_n.gmch_m, pipe_config->dp_m_n.gmch_n,
9886 pipe_config->dp_m_n.link_m, pipe_config->dp_m_n.link_n,
9887 pipe_config->dp_m_n.tu);
9889 DRM_DEBUG_KMS("dp: %i, gmch_m2: %u, gmch_n2: %u, link_m2: %u, link_n2: %u, tu2: %u\n",
9890 pipe_config->has_dp_encoder,
9891 pipe_config->dp_m2_n2.gmch_m,
9892 pipe_config->dp_m2_n2.gmch_n,
9893 pipe_config->dp_m2_n2.link_m,
9894 pipe_config->dp_m2_n2.link_n,
9895 pipe_config->dp_m2_n2.tu);
9897 DRM_DEBUG_KMS("requested mode:\n");
9898 drm_mode_debug_printmodeline(&pipe_config->requested_mode);
9899 DRM_DEBUG_KMS("adjusted mode:\n");
9900 drm_mode_debug_printmodeline(&pipe_config->adjusted_mode);
9901 intel_dump_crtc_timings(&pipe_config->adjusted_mode);
9902 DRM_DEBUG_KMS("port clock: %d\n", pipe_config->port_clock);
9903 DRM_DEBUG_KMS("pipe src size: %dx%d\n",
9904 pipe_config->pipe_src_w, pipe_config->pipe_src_h);
9905 DRM_DEBUG_KMS("gmch pfit: control: 0x%08x, ratios: 0x%08x, lvds border: 0x%08x\n",
9906 pipe_config->gmch_pfit.control,
9907 pipe_config->gmch_pfit.pgm_ratios,
9908 pipe_config->gmch_pfit.lvds_border_bits);
9909 DRM_DEBUG_KMS("pch pfit: pos: 0x%08x, size: 0x%08x, %s\n",
9910 pipe_config->pch_pfit.pos,
9911 pipe_config->pch_pfit.size,
9912 pipe_config->pch_pfit.enabled ? "enabled" : "disabled");
9913 DRM_DEBUG_KMS("ips: %i\n", pipe_config->ips_enabled);
9914 DRM_DEBUG_KMS("double wide: %i\n", pipe_config->double_wide);
9917 static bool encoders_cloneable(const struct intel_encoder *a,
9918 const struct intel_encoder *b)
9920 /* masks could be asymmetric, so check both ways */
9921 return a == b || (a->cloneable & (1 << b->type) &&
9922 b->cloneable & (1 << a->type));
9925 static bool check_single_encoder_cloning(struct intel_crtc *crtc,
9926 struct intel_encoder *encoder)
9928 struct drm_device *dev = crtc->base.dev;
9929 struct intel_encoder *source_encoder;
9931 for_each_intel_encoder(dev, source_encoder) {
9932 if (source_encoder->new_crtc != crtc)
9935 if (!encoders_cloneable(encoder, source_encoder))
9942 static bool check_encoder_cloning(struct intel_crtc *crtc)
9944 struct drm_device *dev = crtc->base.dev;
9945 struct intel_encoder *encoder;
9947 for_each_intel_encoder(dev, encoder) {
9948 if (encoder->new_crtc != crtc)
9951 if (!check_single_encoder_cloning(crtc, encoder))
9958 static struct intel_crtc_config *
9959 intel_modeset_pipe_config(struct drm_crtc *crtc,
9960 struct drm_framebuffer *fb,
9961 struct drm_display_mode *mode)
9963 struct drm_device *dev = crtc->dev;
9964 struct intel_encoder *encoder;
9965 struct intel_crtc_config *pipe_config;
9966 int plane_bpp, ret = -EINVAL;
9969 if (!check_encoder_cloning(to_intel_crtc(crtc))) {
9970 DRM_DEBUG_KMS("rejecting invalid cloning configuration\n");
9971 return ERR_PTR(-EINVAL);
9974 pipe_config = kzalloc(sizeof(*pipe_config), GFP_KERNEL);
9976 return ERR_PTR(-ENOMEM);
9978 drm_mode_copy(&pipe_config->adjusted_mode, mode);
9979 drm_mode_copy(&pipe_config->requested_mode, mode);
9981 pipe_config->cpu_transcoder =
9982 (enum transcoder) to_intel_crtc(crtc)->pipe;
9983 pipe_config->shared_dpll = DPLL_ID_PRIVATE;
9986 * Sanitize sync polarity flags based on requested ones. If neither
9987 * positive or negative polarity is requested, treat this as meaning
9988 * negative polarity.
9990 if (!(pipe_config->adjusted_mode.flags &
9991 (DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NHSYNC)))
9992 pipe_config->adjusted_mode.flags |= DRM_MODE_FLAG_NHSYNC;
9994 if (!(pipe_config->adjusted_mode.flags &
9995 (DRM_MODE_FLAG_PVSYNC | DRM_MODE_FLAG_NVSYNC)))
9996 pipe_config->adjusted_mode.flags |= DRM_MODE_FLAG_NVSYNC;
9998 /* Compute a starting value for pipe_config->pipe_bpp taking the source
9999 * plane pixel format and any sink constraints into account. Returns the
10000 * source plane bpp so that dithering can be selected on mismatches
10001 * after encoders and crtc also have had their say. */
10002 plane_bpp = compute_baseline_pipe_bpp(to_intel_crtc(crtc),
10008 * Determine the real pipe dimensions. Note that stereo modes can
10009 * increase the actual pipe size due to the frame doubling and
10010 * insertion of additional space for blanks between the frame. This
10011 * is stored in the crtc timings. We use the requested mode to do this
10012 * computation to clearly distinguish it from the adjusted mode, which
10013 * can be changed by the connectors in the below retry loop.
10015 drm_mode_set_crtcinfo(&pipe_config->requested_mode, CRTC_STEREO_DOUBLE);
10016 pipe_config->pipe_src_w = pipe_config->requested_mode.crtc_hdisplay;
10017 pipe_config->pipe_src_h = pipe_config->requested_mode.crtc_vdisplay;
10020 /* Ensure the port clock defaults are reset when retrying. */
10021 pipe_config->port_clock = 0;
10022 pipe_config->pixel_multiplier = 1;
10024 /* Fill in default crtc timings, allow encoders to overwrite them. */
10025 drm_mode_set_crtcinfo(&pipe_config->adjusted_mode, CRTC_STEREO_DOUBLE);
10027 /* Pass our mode to the connectors and the CRTC to give them a chance to
10028 * adjust it according to limitations or connector properties, and also
10029 * a chance to reject the mode entirely.
10031 for_each_intel_encoder(dev, encoder) {
10033 if (&encoder->new_crtc->base != crtc)
10036 if (!(encoder->compute_config(encoder, pipe_config))) {
10037 DRM_DEBUG_KMS("Encoder config failure\n");
10042 /* Set default port clock if not overwritten by the encoder. Needs to be
10043 * done afterwards in case the encoder adjusts the mode. */
10044 if (!pipe_config->port_clock)
10045 pipe_config->port_clock = pipe_config->adjusted_mode.crtc_clock
10046 * pipe_config->pixel_multiplier;
10048 ret = intel_crtc_compute_config(to_intel_crtc(crtc), pipe_config);
10050 DRM_DEBUG_KMS("CRTC fixup failed\n");
10054 if (ret == RETRY) {
10055 if (WARN(!retry, "loop in pipe configuration computation\n")) {
10060 DRM_DEBUG_KMS("CRTC bw constrained, retrying\n");
10062 goto encoder_retry;
10065 pipe_config->dither = pipe_config->pipe_bpp != plane_bpp;
10066 DRM_DEBUG_KMS("plane bpp: %i, pipe bpp: %i, dithering: %i\n",
10067 plane_bpp, pipe_config->pipe_bpp, pipe_config->dither);
10069 return pipe_config;
10071 kfree(pipe_config);
10072 return ERR_PTR(ret);
10075 /* Computes which crtcs are affected and sets the relevant bits in the mask. For
10076 * simplicity we use the crtc's pipe number (because it's easier to obtain). */
10078 intel_modeset_affected_pipes(struct drm_crtc *crtc, unsigned *modeset_pipes,
10079 unsigned *prepare_pipes, unsigned *disable_pipes)
10081 struct intel_crtc *intel_crtc;
10082 struct drm_device *dev = crtc->dev;
10083 struct intel_encoder *encoder;
10084 struct intel_connector *connector;
10085 struct drm_crtc *tmp_crtc;
10087 *disable_pipes = *modeset_pipes = *prepare_pipes = 0;
10089 /* Check which crtcs have changed outputs connected to them, these need
10090 * to be part of the prepare_pipes mask. We don't (yet) support global
10091 * modeset across multiple crtcs, so modeset_pipes will only have one
10092 * bit set at most. */
10093 list_for_each_entry(connector, &dev->mode_config.connector_list,
10095 if (connector->base.encoder == &connector->new_encoder->base)
10098 if (connector->base.encoder) {
10099 tmp_crtc = connector->base.encoder->crtc;
10101 *prepare_pipes |= 1 << to_intel_crtc(tmp_crtc)->pipe;
10104 if (connector->new_encoder)
10106 1 << connector->new_encoder->new_crtc->pipe;
10109 for_each_intel_encoder(dev, encoder) {
10110 if (encoder->base.crtc == &encoder->new_crtc->base)
10113 if (encoder->base.crtc) {
10114 tmp_crtc = encoder->base.crtc;
10116 *prepare_pipes |= 1 << to_intel_crtc(tmp_crtc)->pipe;
10119 if (encoder->new_crtc)
10120 *prepare_pipes |= 1 << encoder->new_crtc->pipe;
10123 /* Check for pipes that will be enabled/disabled ... */
10124 for_each_intel_crtc(dev, intel_crtc) {
10125 if (intel_crtc->base.enabled == intel_crtc->new_enabled)
10128 if (!intel_crtc->new_enabled)
10129 *disable_pipes |= 1 << intel_crtc->pipe;
10131 *prepare_pipes |= 1 << intel_crtc->pipe;
10135 /* set_mode is also used to update properties on life display pipes. */
10136 intel_crtc = to_intel_crtc(crtc);
10137 if (intel_crtc->new_enabled)
10138 *prepare_pipes |= 1 << intel_crtc->pipe;
10141 * For simplicity do a full modeset on any pipe where the output routing
10142 * changed. We could be more clever, but that would require us to be
10143 * more careful with calling the relevant encoder->mode_set functions.
10145 if (*prepare_pipes)
10146 *modeset_pipes = *prepare_pipes;
10148 /* ... and mask these out. */
10149 *modeset_pipes &= ~(*disable_pipes);
10150 *prepare_pipes &= ~(*disable_pipes);
10153 * HACK: We don't (yet) fully support global modesets. intel_set_config
10154 * obies this rule, but the modeset restore mode of
10155 * intel_modeset_setup_hw_state does not.
10157 *modeset_pipes &= 1 << intel_crtc->pipe;
10158 *prepare_pipes &= 1 << intel_crtc->pipe;
10160 DRM_DEBUG_KMS("set mode pipe masks: modeset: %x, prepare: %x, disable: %x\n",
10161 *modeset_pipes, *prepare_pipes, *disable_pipes);
10164 static bool intel_crtc_in_use(struct drm_crtc *crtc)
10166 struct drm_encoder *encoder;
10167 struct drm_device *dev = crtc->dev;
10169 list_for_each_entry(encoder, &dev->mode_config.encoder_list, head)
10170 if (encoder->crtc == crtc)
10177 intel_modeset_update_state(struct drm_device *dev, unsigned prepare_pipes)
10179 struct drm_i915_private *dev_priv = dev->dev_private;
10180 struct intel_encoder *intel_encoder;
10181 struct intel_crtc *intel_crtc;
10182 struct drm_connector *connector;
10184 intel_shared_dpll_commit(dev_priv);
10186 for_each_intel_encoder(dev, intel_encoder) {
10187 if (!intel_encoder->base.crtc)
10190 intel_crtc = to_intel_crtc(intel_encoder->base.crtc);
10192 if (prepare_pipes & (1 << intel_crtc->pipe))
10193 intel_encoder->connectors_active = false;
10196 intel_modeset_commit_output_state(dev);
10198 /* Double check state. */
10199 for_each_intel_crtc(dev, intel_crtc) {
10200 WARN_ON(intel_crtc->base.enabled != intel_crtc_in_use(&intel_crtc->base));
10201 WARN_ON(intel_crtc->new_config &&
10202 intel_crtc->new_config != &intel_crtc->config);
10203 WARN_ON(intel_crtc->base.enabled != !!intel_crtc->new_config);
10206 list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
10207 if (!connector->encoder || !connector->encoder->crtc)
10210 intel_crtc = to_intel_crtc(connector->encoder->crtc);
10212 if (prepare_pipes & (1 << intel_crtc->pipe)) {
10213 struct drm_property *dpms_property =
10214 dev->mode_config.dpms_property;
10216 connector->dpms = DRM_MODE_DPMS_ON;
10217 drm_object_property_set_value(&connector->base,
10221 intel_encoder = to_intel_encoder(connector->encoder);
10222 intel_encoder->connectors_active = true;
10228 static bool intel_fuzzy_clock_check(int clock1, int clock2)
10232 if (clock1 == clock2)
10235 if (!clock1 || !clock2)
10238 diff = abs(clock1 - clock2);
10240 if (((((diff + clock1 + clock2) * 100)) / (clock1 + clock2)) < 105)
10246 #define for_each_intel_crtc_masked(dev, mask, intel_crtc) \
10247 list_for_each_entry((intel_crtc), \
10248 &(dev)->mode_config.crtc_list, \
10250 if (mask & (1 <<(intel_crtc)->pipe))
10253 intel_pipe_config_compare(struct drm_device *dev,
10254 struct intel_crtc_config *current_config,
10255 struct intel_crtc_config *pipe_config)
10257 #define PIPE_CONF_CHECK_X(name) \
10258 if (current_config->name != pipe_config->name) { \
10259 DRM_ERROR("mismatch in " #name " " \
10260 "(expected 0x%08x, found 0x%08x)\n", \
10261 current_config->name, \
10262 pipe_config->name); \
10266 #define PIPE_CONF_CHECK_I(name) \
10267 if (current_config->name != pipe_config->name) { \
10268 DRM_ERROR("mismatch in " #name " " \
10269 "(expected %i, found %i)\n", \
10270 current_config->name, \
10271 pipe_config->name); \
10275 /* This is required for BDW+ where there is only one set of registers for
10276 * switching between high and low RR.
10277 * This macro can be used whenever a comparison has to be made between one
10278 * hw state and multiple sw state variables.
10280 #define PIPE_CONF_CHECK_I_ALT(name, alt_name) \
10281 if ((current_config->name != pipe_config->name) && \
10282 (current_config->alt_name != pipe_config->name)) { \
10283 DRM_ERROR("mismatch in " #name " " \
10284 "(expected %i or %i, found %i)\n", \
10285 current_config->name, \
10286 current_config->alt_name, \
10287 pipe_config->name); \
10291 #define PIPE_CONF_CHECK_FLAGS(name, mask) \
10292 if ((current_config->name ^ pipe_config->name) & (mask)) { \
10293 DRM_ERROR("mismatch in " #name "(" #mask ") " \
10294 "(expected %i, found %i)\n", \
10295 current_config->name & (mask), \
10296 pipe_config->name & (mask)); \
10300 #define PIPE_CONF_CHECK_CLOCK_FUZZY(name) \
10301 if (!intel_fuzzy_clock_check(current_config->name, pipe_config->name)) { \
10302 DRM_ERROR("mismatch in " #name " " \
10303 "(expected %i, found %i)\n", \
10304 current_config->name, \
10305 pipe_config->name); \
10309 #define PIPE_CONF_QUIRK(quirk) \
10310 ((current_config->quirks | pipe_config->quirks) & (quirk))
10312 PIPE_CONF_CHECK_I(cpu_transcoder);
10314 PIPE_CONF_CHECK_I(has_pch_encoder);
10315 PIPE_CONF_CHECK_I(fdi_lanes);
10316 PIPE_CONF_CHECK_I(fdi_m_n.gmch_m);
10317 PIPE_CONF_CHECK_I(fdi_m_n.gmch_n);
10318 PIPE_CONF_CHECK_I(fdi_m_n.link_m);
10319 PIPE_CONF_CHECK_I(fdi_m_n.link_n);
10320 PIPE_CONF_CHECK_I(fdi_m_n.tu);
10322 PIPE_CONF_CHECK_I(has_dp_encoder);
10324 if (INTEL_INFO(dev)->gen < 8) {
10325 PIPE_CONF_CHECK_I(dp_m_n.gmch_m);
10326 PIPE_CONF_CHECK_I(dp_m_n.gmch_n);
10327 PIPE_CONF_CHECK_I(dp_m_n.link_m);
10328 PIPE_CONF_CHECK_I(dp_m_n.link_n);
10329 PIPE_CONF_CHECK_I(dp_m_n.tu);
10331 if (current_config->has_drrs) {
10332 PIPE_CONF_CHECK_I(dp_m2_n2.gmch_m);
10333 PIPE_CONF_CHECK_I(dp_m2_n2.gmch_n);
10334 PIPE_CONF_CHECK_I(dp_m2_n2.link_m);
10335 PIPE_CONF_CHECK_I(dp_m2_n2.link_n);
10336 PIPE_CONF_CHECK_I(dp_m2_n2.tu);
10339 PIPE_CONF_CHECK_I_ALT(dp_m_n.gmch_m, dp_m2_n2.gmch_m);
10340 PIPE_CONF_CHECK_I_ALT(dp_m_n.gmch_n, dp_m2_n2.gmch_n);
10341 PIPE_CONF_CHECK_I_ALT(dp_m_n.link_m, dp_m2_n2.link_m);
10342 PIPE_CONF_CHECK_I_ALT(dp_m_n.link_n, dp_m2_n2.link_n);
10343 PIPE_CONF_CHECK_I_ALT(dp_m_n.tu, dp_m2_n2.tu);
10346 PIPE_CONF_CHECK_I(adjusted_mode.crtc_hdisplay);
10347 PIPE_CONF_CHECK_I(adjusted_mode.crtc_htotal);
10348 PIPE_CONF_CHECK_I(adjusted_mode.crtc_hblank_start);
10349 PIPE_CONF_CHECK_I(adjusted_mode.crtc_hblank_end);
10350 PIPE_CONF_CHECK_I(adjusted_mode.crtc_hsync_start);
10351 PIPE_CONF_CHECK_I(adjusted_mode.crtc_hsync_end);
10353 PIPE_CONF_CHECK_I(adjusted_mode.crtc_vdisplay);
10354 PIPE_CONF_CHECK_I(adjusted_mode.crtc_vtotal);
10355 PIPE_CONF_CHECK_I(adjusted_mode.crtc_vblank_start);
10356 PIPE_CONF_CHECK_I(adjusted_mode.crtc_vblank_end);
10357 PIPE_CONF_CHECK_I(adjusted_mode.crtc_vsync_start);
10358 PIPE_CONF_CHECK_I(adjusted_mode.crtc_vsync_end);
10360 PIPE_CONF_CHECK_I(pixel_multiplier);
10361 PIPE_CONF_CHECK_I(has_hdmi_sink);
10362 if ((INTEL_INFO(dev)->gen < 8 && !IS_HASWELL(dev)) ||
10363 IS_VALLEYVIEW(dev))
10364 PIPE_CONF_CHECK_I(limited_color_range);
10365 PIPE_CONF_CHECK_I(has_infoframe);
10367 PIPE_CONF_CHECK_I(has_audio);
10369 PIPE_CONF_CHECK_FLAGS(adjusted_mode.flags,
10370 DRM_MODE_FLAG_INTERLACE);
10372 if (!PIPE_CONF_QUIRK(PIPE_CONFIG_QUIRK_MODE_SYNC_FLAGS)) {
10373 PIPE_CONF_CHECK_FLAGS(adjusted_mode.flags,
10374 DRM_MODE_FLAG_PHSYNC);
10375 PIPE_CONF_CHECK_FLAGS(adjusted_mode.flags,
10376 DRM_MODE_FLAG_NHSYNC);
10377 PIPE_CONF_CHECK_FLAGS(adjusted_mode.flags,
10378 DRM_MODE_FLAG_PVSYNC);
10379 PIPE_CONF_CHECK_FLAGS(adjusted_mode.flags,
10380 DRM_MODE_FLAG_NVSYNC);
10383 PIPE_CONF_CHECK_I(pipe_src_w);
10384 PIPE_CONF_CHECK_I(pipe_src_h);
10387 * FIXME: BIOS likes to set up a cloned config with lvds+external
10388 * screen. Since we don't yet re-compute the pipe config when moving
10389 * just the lvds port away to another pipe the sw tracking won't match.
10391 * Proper atomic modesets with recomputed global state will fix this.
10392 * Until then just don't check gmch state for inherited modes.
10394 if (!PIPE_CONF_QUIRK(PIPE_CONFIG_QUIRK_INHERITED_MODE)) {
10395 PIPE_CONF_CHECK_I(gmch_pfit.control);
10396 /* pfit ratios are autocomputed by the hw on gen4+ */
10397 if (INTEL_INFO(dev)->gen < 4)
10398 PIPE_CONF_CHECK_I(gmch_pfit.pgm_ratios);
10399 PIPE_CONF_CHECK_I(gmch_pfit.lvds_border_bits);
10402 PIPE_CONF_CHECK_I(pch_pfit.enabled);
10403 if (current_config->pch_pfit.enabled) {
10404 PIPE_CONF_CHECK_I(pch_pfit.pos);
10405 PIPE_CONF_CHECK_I(pch_pfit.size);
10408 /* BDW+ don't expose a synchronous way to read the state */
10409 if (IS_HASWELL(dev))
10410 PIPE_CONF_CHECK_I(ips_enabled);
10412 PIPE_CONF_CHECK_I(double_wide);
10414 PIPE_CONF_CHECK_X(ddi_pll_sel);
10416 PIPE_CONF_CHECK_I(shared_dpll);
10417 PIPE_CONF_CHECK_X(dpll_hw_state.dpll);
10418 PIPE_CONF_CHECK_X(dpll_hw_state.dpll_md);
10419 PIPE_CONF_CHECK_X(dpll_hw_state.fp0);
10420 PIPE_CONF_CHECK_X(dpll_hw_state.fp1);
10421 PIPE_CONF_CHECK_X(dpll_hw_state.wrpll);
10423 if (IS_G4X(dev) || INTEL_INFO(dev)->gen >= 5)
10424 PIPE_CONF_CHECK_I(pipe_bpp);
10426 PIPE_CONF_CHECK_CLOCK_FUZZY(adjusted_mode.crtc_clock);
10427 PIPE_CONF_CHECK_CLOCK_FUZZY(port_clock);
10429 #undef PIPE_CONF_CHECK_X
10430 #undef PIPE_CONF_CHECK_I
10431 #undef PIPE_CONF_CHECK_I_ALT
10432 #undef PIPE_CONF_CHECK_FLAGS
10433 #undef PIPE_CONF_CHECK_CLOCK_FUZZY
10434 #undef PIPE_CONF_QUIRK
10439 static void check_wm_state(struct drm_device *dev)
10441 struct drm_i915_private *dev_priv = dev->dev_private;
10442 struct skl_ddb_allocation hw_ddb, *sw_ddb;
10443 struct intel_crtc *intel_crtc;
10446 if (INTEL_INFO(dev)->gen < 9)
10449 skl_ddb_get_hw_state(dev_priv, &hw_ddb);
10450 sw_ddb = &dev_priv->wm.skl_hw.ddb;
10452 for_each_intel_crtc(dev, intel_crtc) {
10453 struct skl_ddb_entry *hw_entry, *sw_entry;
10454 const enum pipe pipe = intel_crtc->pipe;
10456 if (!intel_crtc->active)
10460 for_each_plane(pipe, plane) {
10461 hw_entry = &hw_ddb.plane[pipe][plane];
10462 sw_entry = &sw_ddb->plane[pipe][plane];
10464 if (skl_ddb_entry_equal(hw_entry, sw_entry))
10467 DRM_ERROR("mismatch in DDB state pipe %c plane %d "
10468 "(expected (%u,%u), found (%u,%u))\n",
10469 pipe_name(pipe), plane + 1,
10470 sw_entry->start, sw_entry->end,
10471 hw_entry->start, hw_entry->end);
10475 hw_entry = &hw_ddb.cursor[pipe];
10476 sw_entry = &sw_ddb->cursor[pipe];
10478 if (skl_ddb_entry_equal(hw_entry, sw_entry))
10481 DRM_ERROR("mismatch in DDB state pipe %c cursor "
10482 "(expected (%u,%u), found (%u,%u))\n",
10484 sw_entry->start, sw_entry->end,
10485 hw_entry->start, hw_entry->end);
10490 check_connector_state(struct drm_device *dev)
10492 struct intel_connector *connector;
10494 list_for_each_entry(connector, &dev->mode_config.connector_list,
10496 /* This also checks the encoder/connector hw state with the
10497 * ->get_hw_state callbacks. */
10498 intel_connector_check_state(connector);
10500 WARN(&connector->new_encoder->base != connector->base.encoder,
10501 "connector's staged encoder doesn't match current encoder\n");
10506 check_encoder_state(struct drm_device *dev)
10508 struct intel_encoder *encoder;
10509 struct intel_connector *connector;
10511 for_each_intel_encoder(dev, encoder) {
10512 bool enabled = false;
10513 bool active = false;
10514 enum pipe pipe, tracked_pipe;
10516 DRM_DEBUG_KMS("[ENCODER:%d:%s]\n",
10517 encoder->base.base.id,
10518 encoder->base.name);
10520 WARN(&encoder->new_crtc->base != encoder->base.crtc,
10521 "encoder's stage crtc doesn't match current crtc\n");
10522 WARN(encoder->connectors_active && !encoder->base.crtc,
10523 "encoder's active_connectors set, but no crtc\n");
10525 list_for_each_entry(connector, &dev->mode_config.connector_list,
10527 if (connector->base.encoder != &encoder->base)
10530 if (connector->base.dpms != DRM_MODE_DPMS_OFF)
10534 * for MST connectors if we unplug the connector is gone
10535 * away but the encoder is still connected to a crtc
10536 * until a modeset happens in response to the hotplug.
10538 if (!enabled && encoder->base.encoder_type == DRM_MODE_ENCODER_DPMST)
10541 WARN(!!encoder->base.crtc != enabled,
10542 "encoder's enabled state mismatch "
10543 "(expected %i, found %i)\n",
10544 !!encoder->base.crtc, enabled);
10545 WARN(active && !encoder->base.crtc,
10546 "active encoder with no crtc\n");
10548 WARN(encoder->connectors_active != active,
10549 "encoder's computed active state doesn't match tracked active state "
10550 "(expected %i, found %i)\n", active, encoder->connectors_active);
10552 active = encoder->get_hw_state(encoder, &pipe);
10553 WARN(active != encoder->connectors_active,
10554 "encoder's hw state doesn't match sw tracking "
10555 "(expected %i, found %i)\n",
10556 encoder->connectors_active, active);
10558 if (!encoder->base.crtc)
10561 tracked_pipe = to_intel_crtc(encoder->base.crtc)->pipe;
10562 WARN(active && pipe != tracked_pipe,
10563 "active encoder's pipe doesn't match"
10564 "(expected %i, found %i)\n",
10565 tracked_pipe, pipe);
10571 check_crtc_state(struct drm_device *dev)
10573 struct drm_i915_private *dev_priv = dev->dev_private;
10574 struct intel_crtc *crtc;
10575 struct intel_encoder *encoder;
10576 struct intel_crtc_config pipe_config;
10578 for_each_intel_crtc(dev, crtc) {
10579 bool enabled = false;
10580 bool active = false;
10582 memset(&pipe_config, 0, sizeof(pipe_config));
10584 DRM_DEBUG_KMS("[CRTC:%d]\n",
10585 crtc->base.base.id);
10587 WARN(crtc->active && !crtc->base.enabled,
10588 "active crtc, but not enabled in sw tracking\n");
10590 for_each_intel_encoder(dev, encoder) {
10591 if (encoder->base.crtc != &crtc->base)
10594 if (encoder->connectors_active)
10598 WARN(active != crtc->active,
10599 "crtc's computed active state doesn't match tracked active state "
10600 "(expected %i, found %i)\n", active, crtc->active);
10601 WARN(enabled != crtc->base.enabled,
10602 "crtc's computed enabled state doesn't match tracked enabled state "
10603 "(expected %i, found %i)\n", enabled, crtc->base.enabled);
10605 active = dev_priv->display.get_pipe_config(crtc,
10608 /* hw state is inconsistent with the pipe quirk */
10609 if ((crtc->pipe == PIPE_A && dev_priv->quirks & QUIRK_PIPEA_FORCE) ||
10610 (crtc->pipe == PIPE_B && dev_priv->quirks & QUIRK_PIPEB_FORCE))
10611 active = crtc->active;
10613 for_each_intel_encoder(dev, encoder) {
10615 if (encoder->base.crtc != &crtc->base)
10617 if (encoder->get_hw_state(encoder, &pipe))
10618 encoder->get_config(encoder, &pipe_config);
10621 WARN(crtc->active != active,
10622 "crtc active state doesn't match with hw state "
10623 "(expected %i, found %i)\n", crtc->active, active);
10626 !intel_pipe_config_compare(dev, &crtc->config, &pipe_config)) {
10627 WARN(1, "pipe state doesn't match!\n");
10628 intel_dump_pipe_config(crtc, &pipe_config,
10630 intel_dump_pipe_config(crtc, &crtc->config,
10637 check_shared_dpll_state(struct drm_device *dev)
10639 struct drm_i915_private *dev_priv = dev->dev_private;
10640 struct intel_crtc *crtc;
10641 struct intel_dpll_hw_state dpll_hw_state;
10644 for (i = 0; i < dev_priv->num_shared_dpll; i++) {
10645 struct intel_shared_dpll *pll = &dev_priv->shared_dplls[i];
10646 int enabled_crtcs = 0, active_crtcs = 0;
10649 memset(&dpll_hw_state, 0, sizeof(dpll_hw_state));
10651 DRM_DEBUG_KMS("%s\n", pll->name);
10653 active = pll->get_hw_state(dev_priv, pll, &dpll_hw_state);
10655 WARN(pll->active > hweight32(pll->config.crtc_mask),
10656 "more active pll users than references: %i vs %i\n",
10657 pll->active, hweight32(pll->config.crtc_mask));
10658 WARN(pll->active && !pll->on,
10659 "pll in active use but not on in sw tracking\n");
10660 WARN(pll->on && !pll->active,
10661 "pll in on but not on in use in sw tracking\n");
10662 WARN(pll->on != active,
10663 "pll on state mismatch (expected %i, found %i)\n",
10666 for_each_intel_crtc(dev, crtc) {
10667 if (crtc->base.enabled && intel_crtc_to_shared_dpll(crtc) == pll)
10669 if (crtc->active && intel_crtc_to_shared_dpll(crtc) == pll)
10672 WARN(pll->active != active_crtcs,
10673 "pll active crtcs mismatch (expected %i, found %i)\n",
10674 pll->active, active_crtcs);
10675 WARN(hweight32(pll->config.crtc_mask) != enabled_crtcs,
10676 "pll enabled crtcs mismatch (expected %i, found %i)\n",
10677 hweight32(pll->config.crtc_mask), enabled_crtcs);
10679 WARN(pll->on && memcmp(&pll->config.hw_state, &dpll_hw_state,
10680 sizeof(dpll_hw_state)),
10681 "pll hw state mismatch\n");
10686 intel_modeset_check_state(struct drm_device *dev)
10688 check_wm_state(dev);
10689 check_connector_state(dev);
10690 check_encoder_state(dev);
10691 check_crtc_state(dev);
10692 check_shared_dpll_state(dev);
10695 void ironlake_check_encoder_dotclock(const struct intel_crtc_config *pipe_config,
10699 * FDI already provided one idea for the dotclock.
10700 * Yell if the encoder disagrees.
10702 WARN(!intel_fuzzy_clock_check(pipe_config->adjusted_mode.crtc_clock, dotclock),
10703 "FDI dotclock and encoder dotclock mismatch, fdi: %i, encoder: %i\n",
10704 pipe_config->adjusted_mode.crtc_clock, dotclock);
10707 static void update_scanline_offset(struct intel_crtc *crtc)
10709 struct drm_device *dev = crtc->base.dev;
10712 * The scanline counter increments at the leading edge of hsync.
10714 * On most platforms it starts counting from vtotal-1 on the
10715 * first active line. That means the scanline counter value is
10716 * always one less than what we would expect. Ie. just after
10717 * start of vblank, which also occurs at start of hsync (on the
10718 * last active line), the scanline counter will read vblank_start-1.
10720 * On gen2 the scanline counter starts counting from 1 instead
10721 * of vtotal-1, so we have to subtract one (or rather add vtotal-1
10722 * to keep the value positive), instead of adding one.
10724 * On HSW+ the behaviour of the scanline counter depends on the output
10725 * type. For DP ports it behaves like most other platforms, but on HDMI
10726 * there's an extra 1 line difference. So we need to add two instead of
10727 * one to the value.
10729 if (IS_GEN2(dev)) {
10730 const struct drm_display_mode *mode = &crtc->config.adjusted_mode;
10733 vtotal = mode->crtc_vtotal;
10734 if (mode->flags & DRM_MODE_FLAG_INTERLACE)
10737 crtc->scanline_offset = vtotal - 1;
10738 } else if (HAS_DDI(dev) &&
10739 intel_pipe_has_type(crtc, INTEL_OUTPUT_HDMI)) {
10740 crtc->scanline_offset = 2;
10742 crtc->scanline_offset = 1;
10745 static struct intel_crtc_config *
10746 intel_modeset_compute_config(struct drm_crtc *crtc,
10747 struct drm_display_mode *mode,
10748 struct drm_framebuffer *fb,
10749 unsigned *modeset_pipes,
10750 unsigned *prepare_pipes,
10751 unsigned *disable_pipes)
10753 struct intel_crtc_config *pipe_config = NULL;
10755 intel_modeset_affected_pipes(crtc, modeset_pipes,
10756 prepare_pipes, disable_pipes);
10758 if ((*modeset_pipes) == 0)
10762 * Note this needs changes when we start tracking multiple modes
10763 * and crtcs. At that point we'll need to compute the whole config
10764 * (i.e. one pipe_config for each crtc) rather than just the one
10767 pipe_config = intel_modeset_pipe_config(crtc, fb, mode);
10768 if (IS_ERR(pipe_config)) {
10771 intel_dump_pipe_config(to_intel_crtc(crtc), pipe_config,
10773 to_intel_crtc(crtc)->new_config = pipe_config;
10776 return pipe_config;
10779 static int __intel_set_mode(struct drm_crtc *crtc,
10780 struct drm_display_mode *mode,
10781 int x, int y, struct drm_framebuffer *fb,
10782 struct intel_crtc_config *pipe_config,
10783 unsigned modeset_pipes,
10784 unsigned prepare_pipes,
10785 unsigned disable_pipes)
10787 struct drm_device *dev = crtc->dev;
10788 struct drm_i915_private *dev_priv = dev->dev_private;
10789 struct drm_display_mode *saved_mode;
10790 struct intel_crtc *intel_crtc;
10793 saved_mode = kmalloc(sizeof(*saved_mode), GFP_KERNEL);
10797 *saved_mode = crtc->mode;
10800 * See if the config requires any additional preparation, e.g.
10801 * to adjust global state with pipes off. We need to do this
10802 * here so we can get the modeset_pipe updated config for the new
10803 * mode set on this crtc. For other crtcs we need to use the
10804 * adjusted_mode bits in the crtc directly.
10806 if (IS_VALLEYVIEW(dev)) {
10807 valleyview_modeset_global_pipes(dev, &prepare_pipes);
10809 /* may have added more to prepare_pipes than we should */
10810 prepare_pipes &= ~disable_pipes;
10813 if (dev_priv->display.crtc_compute_clock) {
10814 unsigned clear_pipes = modeset_pipes | disable_pipes;
10816 ret = intel_shared_dpll_start_config(dev_priv, clear_pipes);
10820 for_each_intel_crtc_masked(dev, modeset_pipes, intel_crtc) {
10821 ret = dev_priv->display.crtc_compute_clock(intel_crtc);
10823 intel_shared_dpll_abort_config(dev_priv);
10829 for_each_intel_crtc_masked(dev, disable_pipes, intel_crtc)
10830 intel_crtc_disable(&intel_crtc->base);
10832 for_each_intel_crtc_masked(dev, prepare_pipes, intel_crtc) {
10833 if (intel_crtc->base.enabled)
10834 dev_priv->display.crtc_disable(&intel_crtc->base);
10837 /* crtc->mode is already used by the ->mode_set callbacks, hence we need
10838 * to set it here already despite that we pass it down the callchain.
10840 * Note we'll need to fix this up when we start tracking multiple
10841 * pipes; here we assume a single modeset_pipe and only track the
10842 * single crtc and mode.
10844 if (modeset_pipes) {
10845 crtc->mode = *mode;
10846 /* mode_set/enable/disable functions rely on a correct pipe
10848 to_intel_crtc(crtc)->config = *pipe_config;
10849 to_intel_crtc(crtc)->new_config = &to_intel_crtc(crtc)->config;
10852 * Calculate and store various constants which
10853 * are later needed by vblank and swap-completion
10854 * timestamping. They are derived from true hwmode.
10856 drm_calc_timestamping_constants(crtc,
10857 &pipe_config->adjusted_mode);
10860 /* Only after disabling all output pipelines that will be changed can we
10861 * update the the output configuration. */
10862 intel_modeset_update_state(dev, prepare_pipes);
10864 modeset_update_crtc_power_domains(dev);
10866 /* Set up the DPLL and any encoders state that needs to adjust or depend
10869 for_each_intel_crtc_masked(dev, modeset_pipes, intel_crtc) {
10870 struct drm_framebuffer *old_fb = crtc->primary->fb;
10871 struct drm_i915_gem_object *old_obj = intel_fb_obj(old_fb);
10872 struct drm_i915_gem_object *obj = intel_fb_obj(fb);
10874 mutex_lock(&dev->struct_mutex);
10875 ret = intel_pin_and_fence_fb_obj(crtc->primary, fb, NULL);
10877 DRM_ERROR("pin & fence failed\n");
10878 mutex_unlock(&dev->struct_mutex);
10882 intel_unpin_fb_obj(old_obj);
10883 i915_gem_track_fb(old_obj, obj,
10884 INTEL_FRONTBUFFER_PRIMARY(intel_crtc->pipe));
10885 mutex_unlock(&dev->struct_mutex);
10887 crtc->primary->fb = fb;
10892 /* Now enable the clocks, plane, pipe, and connectors that we set up. */
10893 for_each_intel_crtc_masked(dev, prepare_pipes, intel_crtc) {
10894 update_scanline_offset(intel_crtc);
10896 dev_priv->display.crtc_enable(&intel_crtc->base);
10899 /* FIXME: add subpixel order */
10901 if (ret && crtc->enabled)
10902 crtc->mode = *saved_mode;
10904 kfree(pipe_config);
10909 static int intel_set_mode_pipes(struct drm_crtc *crtc,
10910 struct drm_display_mode *mode,
10911 int x, int y, struct drm_framebuffer *fb,
10912 struct intel_crtc_config *pipe_config,
10913 unsigned modeset_pipes,
10914 unsigned prepare_pipes,
10915 unsigned disable_pipes)
10919 ret = __intel_set_mode(crtc, mode, x, y, fb, pipe_config, modeset_pipes,
10920 prepare_pipes, disable_pipes);
10923 intel_modeset_check_state(crtc->dev);
10928 static int intel_set_mode(struct drm_crtc *crtc,
10929 struct drm_display_mode *mode,
10930 int x, int y, struct drm_framebuffer *fb)
10932 struct intel_crtc_config *pipe_config;
10933 unsigned modeset_pipes, prepare_pipes, disable_pipes;
10935 pipe_config = intel_modeset_compute_config(crtc, mode, fb,
10940 if (IS_ERR(pipe_config))
10941 return PTR_ERR(pipe_config);
10943 return intel_set_mode_pipes(crtc, mode, x, y, fb, pipe_config,
10944 modeset_pipes, prepare_pipes,
10948 void intel_crtc_restore_mode(struct drm_crtc *crtc)
10950 intel_set_mode(crtc, &crtc->mode, crtc->x, crtc->y, crtc->primary->fb);
10953 #undef for_each_intel_crtc_masked
10955 static void intel_set_config_free(struct intel_set_config *config)
10960 kfree(config->save_connector_encoders);
10961 kfree(config->save_encoder_crtcs);
10962 kfree(config->save_crtc_enabled);
10966 static int intel_set_config_save_state(struct drm_device *dev,
10967 struct intel_set_config *config)
10969 struct drm_crtc *crtc;
10970 struct drm_encoder *encoder;
10971 struct drm_connector *connector;
10974 config->save_crtc_enabled =
10975 kcalloc(dev->mode_config.num_crtc,
10976 sizeof(bool), GFP_KERNEL);
10977 if (!config->save_crtc_enabled)
10980 config->save_encoder_crtcs =
10981 kcalloc(dev->mode_config.num_encoder,
10982 sizeof(struct drm_crtc *), GFP_KERNEL);
10983 if (!config->save_encoder_crtcs)
10986 config->save_connector_encoders =
10987 kcalloc(dev->mode_config.num_connector,
10988 sizeof(struct drm_encoder *), GFP_KERNEL);
10989 if (!config->save_connector_encoders)
10992 /* Copy data. Note that driver private data is not affected.
10993 * Should anything bad happen only the expected state is
10994 * restored, not the drivers personal bookkeeping.
10997 for_each_crtc(dev, crtc) {
10998 config->save_crtc_enabled[count++] = crtc->enabled;
11002 list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
11003 config->save_encoder_crtcs[count++] = encoder->crtc;
11007 list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
11008 config->save_connector_encoders[count++] = connector->encoder;
11014 static void intel_set_config_restore_state(struct drm_device *dev,
11015 struct intel_set_config *config)
11017 struct intel_crtc *crtc;
11018 struct intel_encoder *encoder;
11019 struct intel_connector *connector;
11023 for_each_intel_crtc(dev, crtc) {
11024 crtc->new_enabled = config->save_crtc_enabled[count++];
11026 if (crtc->new_enabled)
11027 crtc->new_config = &crtc->config;
11029 crtc->new_config = NULL;
11033 for_each_intel_encoder(dev, encoder) {
11034 encoder->new_crtc =
11035 to_intel_crtc(config->save_encoder_crtcs[count++]);
11039 list_for_each_entry(connector, &dev->mode_config.connector_list, base.head) {
11040 connector->new_encoder =
11041 to_intel_encoder(config->save_connector_encoders[count++]);
11046 is_crtc_connector_off(struct drm_mode_set *set)
11050 if (set->num_connectors == 0)
11053 if (WARN_ON(set->connectors == NULL))
11056 for (i = 0; i < set->num_connectors; i++)
11057 if (set->connectors[i]->encoder &&
11058 set->connectors[i]->encoder->crtc == set->crtc &&
11059 set->connectors[i]->dpms != DRM_MODE_DPMS_ON)
11066 intel_set_config_compute_mode_changes(struct drm_mode_set *set,
11067 struct intel_set_config *config)
11070 /* We should be able to check here if the fb has the same properties
11071 * and then just flip_or_move it */
11072 if (is_crtc_connector_off(set)) {
11073 config->mode_changed = true;
11074 } else if (set->crtc->primary->fb != set->fb) {
11076 * If we have no fb, we can only flip as long as the crtc is
11077 * active, otherwise we need a full mode set. The crtc may
11078 * be active if we've only disabled the primary plane, or
11079 * in fastboot situations.
11081 if (set->crtc->primary->fb == NULL) {
11082 struct intel_crtc *intel_crtc =
11083 to_intel_crtc(set->crtc);
11085 if (intel_crtc->active) {
11086 DRM_DEBUG_KMS("crtc has no fb, will flip\n");
11087 config->fb_changed = true;
11089 DRM_DEBUG_KMS("inactive crtc, full mode set\n");
11090 config->mode_changed = true;
11092 } else if (set->fb == NULL) {
11093 config->mode_changed = true;
11094 } else if (set->fb->pixel_format !=
11095 set->crtc->primary->fb->pixel_format) {
11096 config->mode_changed = true;
11098 config->fb_changed = true;
11102 if (set->fb && (set->x != set->crtc->x || set->y != set->crtc->y))
11103 config->fb_changed = true;
11105 if (set->mode && !drm_mode_equal(set->mode, &set->crtc->mode)) {
11106 DRM_DEBUG_KMS("modes are different, full mode set\n");
11107 drm_mode_debug_printmodeline(&set->crtc->mode);
11108 drm_mode_debug_printmodeline(set->mode);
11109 config->mode_changed = true;
11112 DRM_DEBUG_KMS("computed changes for [CRTC:%d], mode_changed=%d, fb_changed=%d\n",
11113 set->crtc->base.id, config->mode_changed, config->fb_changed);
11117 intel_modeset_stage_output_state(struct drm_device *dev,
11118 struct drm_mode_set *set,
11119 struct intel_set_config *config)
11121 struct intel_connector *connector;
11122 struct intel_encoder *encoder;
11123 struct intel_crtc *crtc;
11126 /* The upper layers ensure that we either disable a crtc or have a list
11127 * of connectors. For paranoia, double-check this. */
11128 WARN_ON(!set->fb && (set->num_connectors != 0));
11129 WARN_ON(set->fb && (set->num_connectors == 0));
11131 list_for_each_entry(connector, &dev->mode_config.connector_list,
11133 /* Otherwise traverse passed in connector list and get encoders
11135 for (ro = 0; ro < set->num_connectors; ro++) {
11136 if (set->connectors[ro] == &connector->base) {
11137 connector->new_encoder = intel_find_encoder(connector, to_intel_crtc(set->crtc)->pipe);
11142 /* If we disable the crtc, disable all its connectors. Also, if
11143 * the connector is on the changing crtc but not on the new
11144 * connector list, disable it. */
11145 if ((!set->fb || ro == set->num_connectors) &&
11146 connector->base.encoder &&
11147 connector->base.encoder->crtc == set->crtc) {
11148 connector->new_encoder = NULL;
11150 DRM_DEBUG_KMS("[CONNECTOR:%d:%s] to [NOCRTC]\n",
11151 connector->base.base.id,
11152 connector->base.name);
11156 if (&connector->new_encoder->base != connector->base.encoder) {
11157 DRM_DEBUG_KMS("encoder changed, full mode switch\n");
11158 config->mode_changed = true;
11161 /* connector->new_encoder is now updated for all connectors. */
11163 /* Update crtc of enabled connectors. */
11164 list_for_each_entry(connector, &dev->mode_config.connector_list,
11166 struct drm_crtc *new_crtc;
11168 if (!connector->new_encoder)
11171 new_crtc = connector->new_encoder->base.crtc;
11173 for (ro = 0; ro < set->num_connectors; ro++) {
11174 if (set->connectors[ro] == &connector->base)
11175 new_crtc = set->crtc;
11178 /* Make sure the new CRTC will work with the encoder */
11179 if (!drm_encoder_crtc_ok(&connector->new_encoder->base,
11183 connector->new_encoder->new_crtc = to_intel_crtc(new_crtc);
11185 DRM_DEBUG_KMS("[CONNECTOR:%d:%s] to [CRTC:%d]\n",
11186 connector->base.base.id,
11187 connector->base.name,
11188 new_crtc->base.id);
11191 /* Check for any encoders that needs to be disabled. */
11192 for_each_intel_encoder(dev, encoder) {
11193 int num_connectors = 0;
11194 list_for_each_entry(connector,
11195 &dev->mode_config.connector_list,
11197 if (connector->new_encoder == encoder) {
11198 WARN_ON(!connector->new_encoder->new_crtc);
11203 if (num_connectors == 0)
11204 encoder->new_crtc = NULL;
11205 else if (num_connectors > 1)
11208 /* Only now check for crtc changes so we don't miss encoders
11209 * that will be disabled. */
11210 if (&encoder->new_crtc->base != encoder->base.crtc) {
11211 DRM_DEBUG_KMS("crtc changed, full mode switch\n");
11212 config->mode_changed = true;
11215 /* Now we've also updated encoder->new_crtc for all encoders. */
11216 list_for_each_entry(connector, &dev->mode_config.connector_list,
11218 if (connector->new_encoder)
11219 if (connector->new_encoder != connector->encoder)
11220 connector->encoder = connector->new_encoder;
11222 for_each_intel_crtc(dev, crtc) {
11223 crtc->new_enabled = false;
11225 for_each_intel_encoder(dev, encoder) {
11226 if (encoder->new_crtc == crtc) {
11227 crtc->new_enabled = true;
11232 if (crtc->new_enabled != crtc->base.enabled) {
11233 DRM_DEBUG_KMS("crtc %sabled, full mode switch\n",
11234 crtc->new_enabled ? "en" : "dis");
11235 config->mode_changed = true;
11238 if (crtc->new_enabled)
11239 crtc->new_config = &crtc->config;
11241 crtc->new_config = NULL;
11247 static void disable_crtc_nofb(struct intel_crtc *crtc)
11249 struct drm_device *dev = crtc->base.dev;
11250 struct intel_encoder *encoder;
11251 struct intel_connector *connector;
11253 DRM_DEBUG_KMS("Trying to restore without FB -> disabling pipe %c\n",
11254 pipe_name(crtc->pipe));
11256 list_for_each_entry(connector, &dev->mode_config.connector_list, base.head) {
11257 if (connector->new_encoder &&
11258 connector->new_encoder->new_crtc == crtc)
11259 connector->new_encoder = NULL;
11262 for_each_intel_encoder(dev, encoder) {
11263 if (encoder->new_crtc == crtc)
11264 encoder->new_crtc = NULL;
11267 crtc->new_enabled = false;
11268 crtc->new_config = NULL;
11271 static int intel_crtc_set_config(struct drm_mode_set *set)
11273 struct drm_device *dev;
11274 struct drm_mode_set save_set;
11275 struct intel_set_config *config;
11276 struct intel_crtc_config *pipe_config;
11277 unsigned modeset_pipes, prepare_pipes, disable_pipes;
11281 BUG_ON(!set->crtc);
11282 BUG_ON(!set->crtc->helper_private);
11284 /* Enforce sane interface api - has been abused by the fb helper. */
11285 BUG_ON(!set->mode && set->fb);
11286 BUG_ON(set->fb && set->num_connectors == 0);
11289 DRM_DEBUG_KMS("[CRTC:%d] [FB:%d] #connectors=%d (x y) (%i %i)\n",
11290 set->crtc->base.id, set->fb->base.id,
11291 (int)set->num_connectors, set->x, set->y);
11293 DRM_DEBUG_KMS("[CRTC:%d] [NOFB]\n", set->crtc->base.id);
11296 dev = set->crtc->dev;
11299 config = kzalloc(sizeof(*config), GFP_KERNEL);
11303 ret = intel_set_config_save_state(dev, config);
11307 save_set.crtc = set->crtc;
11308 save_set.mode = &set->crtc->mode;
11309 save_set.x = set->crtc->x;
11310 save_set.y = set->crtc->y;
11311 save_set.fb = set->crtc->primary->fb;
11313 /* Compute whether we need a full modeset, only an fb base update or no
11314 * change at all. In the future we might also check whether only the
11315 * mode changed, e.g. for LVDS where we only change the panel fitter in
11317 intel_set_config_compute_mode_changes(set, config);
11319 ret = intel_modeset_stage_output_state(dev, set, config);
11323 pipe_config = intel_modeset_compute_config(set->crtc, set->mode,
11328 if (IS_ERR(pipe_config))
11331 /* set_mode will free it in the mode_changed case */
11332 if (!config->mode_changed)
11333 kfree(pipe_config);
11335 if (config->mode_changed) {
11336 ret = intel_set_mode_pipes(set->crtc, set->mode,
11337 set->x, set->y, set->fb, pipe_config,
11338 modeset_pipes, prepare_pipes,
11340 } else if (config->fb_changed) {
11341 struct intel_crtc *intel_crtc = to_intel_crtc(set->crtc);
11343 intel_crtc_wait_for_pending_flips(set->crtc);
11345 ret = intel_pipe_set_base(set->crtc,
11346 set->x, set->y, set->fb);
11349 * We need to make sure the primary plane is re-enabled if it
11350 * has previously been turned off.
11352 if (!intel_crtc->primary_enabled && ret == 0) {
11353 WARN_ON(!intel_crtc->active);
11354 intel_enable_primary_hw_plane(set->crtc->primary, set->crtc);
11358 * In the fastboot case this may be our only check of the
11359 * state after boot. It would be better to only do it on
11360 * the first update, but we don't have a nice way of doing that
11361 * (and really, set_config isn't used much for high freq page
11362 * flipping, so increasing its cost here shouldn't be a big
11365 if (i915.fastboot && ret == 0)
11366 intel_modeset_check_state(set->crtc->dev);
11370 DRM_DEBUG_KMS("failed to set mode on [CRTC:%d], err = %d\n",
11371 set->crtc->base.id, ret);
11373 intel_set_config_restore_state(dev, config);
11376 * HACK: if the pipe was on, but we didn't have a framebuffer,
11377 * force the pipe off to avoid oopsing in the modeset code
11378 * due to fb==NULL. This should only happen during boot since
11379 * we don't yet reconstruct the FB from the hardware state.
11381 if (to_intel_crtc(save_set.crtc)->new_enabled && !save_set.fb)
11382 disable_crtc_nofb(to_intel_crtc(save_set.crtc));
11384 /* Try to restore the config */
11385 if (config->mode_changed &&
11386 intel_set_mode(save_set.crtc, save_set.mode,
11387 save_set.x, save_set.y, save_set.fb))
11388 DRM_ERROR("failed to restore config after modeset failure\n");
11392 intel_set_config_free(config);
11396 static const struct drm_crtc_funcs intel_crtc_funcs = {
11397 .gamma_set = intel_crtc_gamma_set,
11398 .set_config = intel_crtc_set_config,
11399 .destroy = intel_crtc_destroy,
11400 .page_flip = intel_crtc_page_flip,
11403 static bool ibx_pch_dpll_get_hw_state(struct drm_i915_private *dev_priv,
11404 struct intel_shared_dpll *pll,
11405 struct intel_dpll_hw_state *hw_state)
11409 if (!intel_display_power_is_enabled(dev_priv, POWER_DOMAIN_PLLS))
11412 val = I915_READ(PCH_DPLL(pll->id));
11413 hw_state->dpll = val;
11414 hw_state->fp0 = I915_READ(PCH_FP0(pll->id));
11415 hw_state->fp1 = I915_READ(PCH_FP1(pll->id));
11417 return val & DPLL_VCO_ENABLE;
11420 static void ibx_pch_dpll_mode_set(struct drm_i915_private *dev_priv,
11421 struct intel_shared_dpll *pll)
11423 I915_WRITE(PCH_FP0(pll->id), pll->config.hw_state.fp0);
11424 I915_WRITE(PCH_FP1(pll->id), pll->config.hw_state.fp1);
11427 static void ibx_pch_dpll_enable(struct drm_i915_private *dev_priv,
11428 struct intel_shared_dpll *pll)
11430 /* PCH refclock must be enabled first */
11431 ibx_assert_pch_refclk_enabled(dev_priv);
11433 I915_WRITE(PCH_DPLL(pll->id), pll->config.hw_state.dpll);
11435 /* Wait for the clocks to stabilize. */
11436 POSTING_READ(PCH_DPLL(pll->id));
11439 /* The pixel multiplier can only be updated once the
11440 * DPLL is enabled and the clocks are stable.
11442 * So write it again.
11444 I915_WRITE(PCH_DPLL(pll->id), pll->config.hw_state.dpll);
11445 POSTING_READ(PCH_DPLL(pll->id));
11449 static void ibx_pch_dpll_disable(struct drm_i915_private *dev_priv,
11450 struct intel_shared_dpll *pll)
11452 struct drm_device *dev = dev_priv->dev;
11453 struct intel_crtc *crtc;
11455 /* Make sure no transcoder isn't still depending on us. */
11456 for_each_intel_crtc(dev, crtc) {
11457 if (intel_crtc_to_shared_dpll(crtc) == pll)
11458 assert_pch_transcoder_disabled(dev_priv, crtc->pipe);
11461 I915_WRITE(PCH_DPLL(pll->id), 0);
11462 POSTING_READ(PCH_DPLL(pll->id));
11466 static char *ibx_pch_dpll_names[] = {
11471 static void ibx_pch_dpll_init(struct drm_device *dev)
11473 struct drm_i915_private *dev_priv = dev->dev_private;
11476 dev_priv->num_shared_dpll = 2;
11478 for (i = 0; i < dev_priv->num_shared_dpll; i++) {
11479 dev_priv->shared_dplls[i].id = i;
11480 dev_priv->shared_dplls[i].name = ibx_pch_dpll_names[i];
11481 dev_priv->shared_dplls[i].mode_set = ibx_pch_dpll_mode_set;
11482 dev_priv->shared_dplls[i].enable = ibx_pch_dpll_enable;
11483 dev_priv->shared_dplls[i].disable = ibx_pch_dpll_disable;
11484 dev_priv->shared_dplls[i].get_hw_state =
11485 ibx_pch_dpll_get_hw_state;
11489 static void intel_shared_dpll_init(struct drm_device *dev)
11491 struct drm_i915_private *dev_priv = dev->dev_private;
11494 intel_ddi_pll_init(dev);
11495 else if (HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev))
11496 ibx_pch_dpll_init(dev);
11498 dev_priv->num_shared_dpll = 0;
11500 BUG_ON(dev_priv->num_shared_dpll > I915_NUM_PLLS);
11504 intel_primary_plane_disable(struct drm_plane *plane)
11506 struct drm_device *dev = plane->dev;
11507 struct intel_crtc *intel_crtc;
11512 BUG_ON(!plane->crtc);
11514 intel_crtc = to_intel_crtc(plane->crtc);
11517 * Even though we checked plane->fb above, it's still possible that
11518 * the primary plane has been implicitly disabled because the crtc
11519 * coordinates given weren't visible, or because we detected
11520 * that it was 100% covered by a sprite plane. Or, the CRTC may be
11521 * off and we've set a fb, but haven't actually turned on the CRTC yet.
11522 * In either case, we need to unpin the FB and let the fb pointer get
11523 * updated, but otherwise we don't need to touch the hardware.
11525 if (!intel_crtc->primary_enabled)
11526 goto disable_unpin;
11528 intel_crtc_wait_for_pending_flips(plane->crtc);
11529 intel_disable_primary_hw_plane(plane, plane->crtc);
11532 mutex_lock(&dev->struct_mutex);
11533 i915_gem_track_fb(intel_fb_obj(plane->fb), NULL,
11534 INTEL_FRONTBUFFER_PRIMARY(intel_crtc->pipe));
11535 intel_unpin_fb_obj(intel_fb_obj(plane->fb));
11536 mutex_unlock(&dev->struct_mutex);
11543 intel_check_primary_plane(struct drm_plane *plane,
11544 struct intel_plane_state *state)
11546 struct drm_crtc *crtc = state->crtc;
11547 struct drm_framebuffer *fb = state->fb;
11548 struct drm_rect *dest = &state->dst;
11549 struct drm_rect *src = &state->src;
11550 const struct drm_rect *clip = &state->clip;
11552 return drm_plane_helper_check_update(plane, crtc, fb,
11554 DRM_PLANE_HELPER_NO_SCALING,
11555 DRM_PLANE_HELPER_NO_SCALING,
11556 false, true, &state->visible);
11560 intel_prepare_primary_plane(struct drm_plane *plane,
11561 struct intel_plane_state *state)
11563 struct drm_crtc *crtc = state->crtc;
11564 struct drm_framebuffer *fb = state->fb;
11565 struct drm_device *dev = crtc->dev;
11566 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
11567 enum pipe pipe = intel_crtc->pipe;
11568 struct drm_i915_gem_object *obj = intel_fb_obj(fb);
11569 struct drm_i915_gem_object *old_obj = intel_fb_obj(plane->fb);
11572 intel_crtc_wait_for_pending_flips(crtc);
11574 if (intel_crtc_has_pending_flip(crtc)) {
11575 DRM_ERROR("pipe is still busy with an old pageflip\n");
11579 if (old_obj != obj) {
11580 mutex_lock(&dev->struct_mutex);
11581 ret = intel_pin_and_fence_fb_obj(plane, fb, NULL);
11583 i915_gem_track_fb(old_obj, obj,
11584 INTEL_FRONTBUFFER_PRIMARY(pipe));
11585 mutex_unlock(&dev->struct_mutex);
11587 DRM_DEBUG_KMS("pin & fence failed\n");
11596 intel_commit_primary_plane(struct drm_plane *plane,
11597 struct intel_plane_state *state)
11599 struct drm_crtc *crtc = state->crtc;
11600 struct drm_framebuffer *fb = state->fb;
11601 struct drm_device *dev = crtc->dev;
11602 struct drm_i915_private *dev_priv = dev->dev_private;
11603 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
11604 enum pipe pipe = intel_crtc->pipe;
11605 struct drm_framebuffer *old_fb = plane->fb;
11606 struct drm_i915_gem_object *obj = intel_fb_obj(fb);
11607 struct drm_i915_gem_object *old_obj = intel_fb_obj(plane->fb);
11608 struct intel_plane *intel_plane = to_intel_plane(plane);
11609 struct drm_rect *src = &state->src;
11611 crtc->primary->fb = fb;
11615 intel_plane->crtc_x = state->orig_dst.x1;
11616 intel_plane->crtc_y = state->orig_dst.y1;
11617 intel_plane->crtc_w = drm_rect_width(&state->orig_dst);
11618 intel_plane->crtc_h = drm_rect_height(&state->orig_dst);
11619 intel_plane->src_x = state->orig_src.x1;
11620 intel_plane->src_y = state->orig_src.y1;
11621 intel_plane->src_w = drm_rect_width(&state->orig_src);
11622 intel_plane->src_h = drm_rect_height(&state->orig_src);
11623 intel_plane->obj = obj;
11625 if (intel_crtc->active) {
11627 * FBC does not work on some platforms for rotated
11628 * planes, so disable it when rotation is not 0 and
11629 * update it when rotation is set back to 0.
11631 * FIXME: This is redundant with the fbc update done in
11632 * the primary plane enable function except that that
11633 * one is done too late. We eventually need to unify
11636 if (intel_crtc->primary_enabled &&
11637 INTEL_INFO(dev)->gen <= 4 && !IS_G4X(dev) &&
11638 dev_priv->fbc.plane == intel_crtc->plane &&
11639 intel_plane->rotation != BIT(DRM_ROTATE_0)) {
11640 intel_disable_fbc(dev);
11643 if (state->visible) {
11644 bool was_enabled = intel_crtc->primary_enabled;
11646 /* FIXME: kill this fastboot hack */
11647 intel_update_pipe_size(intel_crtc);
11649 intel_crtc->primary_enabled = true;
11651 dev_priv->display.update_primary_plane(crtc, plane->fb,
11655 * BDW signals flip done immediately if the plane
11656 * is disabled, even if the plane enable is already
11657 * armed to occur at the next vblank :(
11659 if (IS_BROADWELL(dev) && !was_enabled)
11660 intel_wait_for_vblank(dev, intel_crtc->pipe);
11663 * If clipping results in a non-visible primary plane,
11664 * we'll disable the primary plane. Note that this is
11665 * a bit different than what happens if userspace
11666 * explicitly disables the plane by passing fb=0
11667 * because plane->fb still gets set and pinned.
11669 intel_disable_primary_hw_plane(plane, crtc);
11672 intel_frontbuffer_flip(dev, INTEL_FRONTBUFFER_PRIMARY(pipe));
11674 mutex_lock(&dev->struct_mutex);
11675 intel_update_fbc(dev);
11676 mutex_unlock(&dev->struct_mutex);
11679 if (old_fb && old_fb != fb) {
11680 if (intel_crtc->active)
11681 intel_wait_for_vblank(dev, intel_crtc->pipe);
11683 mutex_lock(&dev->struct_mutex);
11684 intel_unpin_fb_obj(old_obj);
11685 mutex_unlock(&dev->struct_mutex);
11690 intel_primary_plane_setplane(struct drm_plane *plane, struct drm_crtc *crtc,
11691 struct drm_framebuffer *fb, int crtc_x, int crtc_y,
11692 unsigned int crtc_w, unsigned int crtc_h,
11693 uint32_t src_x, uint32_t src_y,
11694 uint32_t src_w, uint32_t src_h)
11696 struct intel_plane_state state;
11697 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
11703 /* sample coordinates in 16.16 fixed point */
11704 state.src.x1 = src_x;
11705 state.src.x2 = src_x + src_w;
11706 state.src.y1 = src_y;
11707 state.src.y2 = src_y + src_h;
11709 /* integer pixels */
11710 state.dst.x1 = crtc_x;
11711 state.dst.x2 = crtc_x + crtc_w;
11712 state.dst.y1 = crtc_y;
11713 state.dst.y2 = crtc_y + crtc_h;
11717 state.clip.x2 = intel_crtc->active ? intel_crtc->config.pipe_src_w : 0;
11718 state.clip.y2 = intel_crtc->active ? intel_crtc->config.pipe_src_h : 0;
11720 state.orig_src = state.src;
11721 state.orig_dst = state.dst;
11723 ret = intel_check_primary_plane(plane, &state);
11727 ret = intel_prepare_primary_plane(plane, &state);
11731 intel_commit_primary_plane(plane, &state);
11736 /* Common destruction function for both primary and cursor planes */
11737 static void intel_plane_destroy(struct drm_plane *plane)
11739 struct intel_plane *intel_plane = to_intel_plane(plane);
11740 drm_plane_cleanup(plane);
11741 kfree(intel_plane);
11744 static const struct drm_plane_funcs intel_primary_plane_funcs = {
11745 .update_plane = intel_primary_plane_setplane,
11746 .disable_plane = intel_primary_plane_disable,
11747 .destroy = intel_plane_destroy,
11748 .set_property = intel_plane_set_property
11751 static struct drm_plane *intel_primary_plane_create(struct drm_device *dev,
11754 struct intel_plane *primary;
11755 const uint32_t *intel_primary_formats;
11758 primary = kzalloc(sizeof(*primary), GFP_KERNEL);
11759 if (primary == NULL)
11762 primary->can_scale = false;
11763 primary->max_downscale = 1;
11764 primary->pipe = pipe;
11765 primary->plane = pipe;
11766 primary->rotation = BIT(DRM_ROTATE_0);
11767 if (HAS_FBC(dev) && INTEL_INFO(dev)->gen < 4)
11768 primary->plane = !pipe;
11770 if (INTEL_INFO(dev)->gen <= 3) {
11771 intel_primary_formats = intel_primary_formats_gen2;
11772 num_formats = ARRAY_SIZE(intel_primary_formats_gen2);
11774 intel_primary_formats = intel_primary_formats_gen4;
11775 num_formats = ARRAY_SIZE(intel_primary_formats_gen4);
11778 drm_universal_plane_init(dev, &primary->base, 0,
11779 &intel_primary_plane_funcs,
11780 intel_primary_formats, num_formats,
11781 DRM_PLANE_TYPE_PRIMARY);
11783 if (INTEL_INFO(dev)->gen >= 4) {
11784 if (!dev->mode_config.rotation_property)
11785 dev->mode_config.rotation_property =
11786 drm_mode_create_rotation_property(dev,
11787 BIT(DRM_ROTATE_0) |
11788 BIT(DRM_ROTATE_180));
11789 if (dev->mode_config.rotation_property)
11790 drm_object_attach_property(&primary->base.base,
11791 dev->mode_config.rotation_property,
11792 primary->rotation);
11795 return &primary->base;
11799 intel_cursor_plane_disable(struct drm_plane *plane)
11804 BUG_ON(!plane->crtc);
11806 return intel_crtc_cursor_set_obj(plane->crtc, NULL, 0, 0);
11810 intel_check_cursor_plane(struct drm_plane *plane,
11811 struct intel_plane_state *state)
11813 struct drm_crtc *crtc = state->crtc;
11814 struct drm_device *dev = crtc->dev;
11815 struct drm_framebuffer *fb = state->fb;
11816 struct drm_rect *dest = &state->dst;
11817 struct drm_rect *src = &state->src;
11818 const struct drm_rect *clip = &state->clip;
11819 struct drm_i915_gem_object *obj = intel_fb_obj(fb);
11820 int crtc_w, crtc_h;
11824 ret = drm_plane_helper_check_update(plane, crtc, fb,
11826 DRM_PLANE_HELPER_NO_SCALING,
11827 DRM_PLANE_HELPER_NO_SCALING,
11828 true, true, &state->visible);
11833 /* if we want to turn off the cursor ignore width and height */
11837 /* Check for which cursor types we support */
11838 crtc_w = drm_rect_width(&state->orig_dst);
11839 crtc_h = drm_rect_height(&state->orig_dst);
11840 if (!cursor_size_ok(dev, crtc_w, crtc_h)) {
11841 DRM_DEBUG("Cursor dimension not supported\n");
11845 stride = roundup_pow_of_two(crtc_w) * 4;
11846 if (obj->base.size < stride * crtc_h) {
11847 DRM_DEBUG_KMS("buffer is too small\n");
11851 if (fb == crtc->cursor->fb)
11854 /* we only need to pin inside GTT if cursor is non-phy */
11855 mutex_lock(&dev->struct_mutex);
11856 if (!INTEL_INFO(dev)->cursor_needs_physical && obj->tiling_mode) {
11857 DRM_DEBUG_KMS("cursor cannot be tiled\n");
11860 mutex_unlock(&dev->struct_mutex);
11866 intel_commit_cursor_plane(struct drm_plane *plane,
11867 struct intel_plane_state *state)
11869 struct drm_crtc *crtc = state->crtc;
11870 struct drm_framebuffer *fb = state->fb;
11871 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
11872 struct intel_plane *intel_plane = to_intel_plane(plane);
11873 struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
11874 struct drm_i915_gem_object *obj = intel_fb->obj;
11875 int crtc_w, crtc_h;
11877 crtc->cursor_x = state->orig_dst.x1;
11878 crtc->cursor_y = state->orig_dst.y1;
11880 intel_plane->crtc_x = state->orig_dst.x1;
11881 intel_plane->crtc_y = state->orig_dst.y1;
11882 intel_plane->crtc_w = drm_rect_width(&state->orig_dst);
11883 intel_plane->crtc_h = drm_rect_height(&state->orig_dst);
11884 intel_plane->src_x = state->orig_src.x1;
11885 intel_plane->src_y = state->orig_src.y1;
11886 intel_plane->src_w = drm_rect_width(&state->orig_src);
11887 intel_plane->src_h = drm_rect_height(&state->orig_src);
11888 intel_plane->obj = obj;
11890 if (fb != crtc->cursor->fb) {
11891 crtc_w = drm_rect_width(&state->orig_dst);
11892 crtc_h = drm_rect_height(&state->orig_dst);
11893 return intel_crtc_cursor_set_obj(crtc, obj, crtc_w, crtc_h);
11895 intel_crtc_update_cursor(crtc, state->visible);
11897 intel_frontbuffer_flip(crtc->dev,
11898 INTEL_FRONTBUFFER_CURSOR(intel_crtc->pipe));
11905 intel_cursor_plane_update(struct drm_plane *plane, struct drm_crtc *crtc,
11906 struct drm_framebuffer *fb, int crtc_x, int crtc_y,
11907 unsigned int crtc_w, unsigned int crtc_h,
11908 uint32_t src_x, uint32_t src_y,
11909 uint32_t src_w, uint32_t src_h)
11911 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
11912 struct intel_plane_state state;
11918 /* sample coordinates in 16.16 fixed point */
11919 state.src.x1 = src_x;
11920 state.src.x2 = src_x + src_w;
11921 state.src.y1 = src_y;
11922 state.src.y2 = src_y + src_h;
11924 /* integer pixels */
11925 state.dst.x1 = crtc_x;
11926 state.dst.x2 = crtc_x + crtc_w;
11927 state.dst.y1 = crtc_y;
11928 state.dst.y2 = crtc_y + crtc_h;
11932 state.clip.x2 = intel_crtc->active ? intel_crtc->config.pipe_src_w : 0;
11933 state.clip.y2 = intel_crtc->active ? intel_crtc->config.pipe_src_h : 0;
11935 state.orig_src = state.src;
11936 state.orig_dst = state.dst;
11938 ret = intel_check_cursor_plane(plane, &state);
11942 return intel_commit_cursor_plane(plane, &state);
11945 static const struct drm_plane_funcs intel_cursor_plane_funcs = {
11946 .update_plane = intel_cursor_plane_update,
11947 .disable_plane = intel_cursor_plane_disable,
11948 .destroy = intel_plane_destroy,
11949 .set_property = intel_plane_set_property,
11952 static struct drm_plane *intel_cursor_plane_create(struct drm_device *dev,
11955 struct intel_plane *cursor;
11957 cursor = kzalloc(sizeof(*cursor), GFP_KERNEL);
11958 if (cursor == NULL)
11961 cursor->can_scale = false;
11962 cursor->max_downscale = 1;
11963 cursor->pipe = pipe;
11964 cursor->plane = pipe;
11965 cursor->rotation = BIT(DRM_ROTATE_0);
11967 drm_universal_plane_init(dev, &cursor->base, 0,
11968 &intel_cursor_plane_funcs,
11969 intel_cursor_formats,
11970 ARRAY_SIZE(intel_cursor_formats),
11971 DRM_PLANE_TYPE_CURSOR);
11973 if (INTEL_INFO(dev)->gen >= 4) {
11974 if (!dev->mode_config.rotation_property)
11975 dev->mode_config.rotation_property =
11976 drm_mode_create_rotation_property(dev,
11977 BIT(DRM_ROTATE_0) |
11978 BIT(DRM_ROTATE_180));
11979 if (dev->mode_config.rotation_property)
11980 drm_object_attach_property(&cursor->base.base,
11981 dev->mode_config.rotation_property,
11985 return &cursor->base;
11988 static void intel_crtc_init(struct drm_device *dev, int pipe)
11990 struct drm_i915_private *dev_priv = dev->dev_private;
11991 struct intel_crtc *intel_crtc;
11992 struct drm_plane *primary = NULL;
11993 struct drm_plane *cursor = NULL;
11996 intel_crtc = kzalloc(sizeof(*intel_crtc), GFP_KERNEL);
11997 if (intel_crtc == NULL)
12000 primary = intel_primary_plane_create(dev, pipe);
12004 cursor = intel_cursor_plane_create(dev, pipe);
12008 ret = drm_crtc_init_with_planes(dev, &intel_crtc->base, primary,
12009 cursor, &intel_crtc_funcs);
12013 drm_mode_crtc_set_gamma_size(&intel_crtc->base, 256);
12014 for (i = 0; i < 256; i++) {
12015 intel_crtc->lut_r[i] = i;
12016 intel_crtc->lut_g[i] = i;
12017 intel_crtc->lut_b[i] = i;
12021 * On gen2/3 only plane A can do fbc, but the panel fitter and lvds port
12022 * is hooked to pipe B. Hence we want plane A feeding pipe B.
12024 intel_crtc->pipe = pipe;
12025 intel_crtc->plane = pipe;
12026 if (HAS_FBC(dev) && INTEL_INFO(dev)->gen < 4) {
12027 DRM_DEBUG_KMS("swapping pipes & planes for FBC\n");
12028 intel_crtc->plane = !pipe;
12031 intel_crtc->cursor_base = ~0;
12032 intel_crtc->cursor_cntl = ~0;
12033 intel_crtc->cursor_size = ~0;
12035 BUG_ON(pipe >= ARRAY_SIZE(dev_priv->plane_to_crtc_mapping) ||
12036 dev_priv->plane_to_crtc_mapping[intel_crtc->plane] != NULL);
12037 dev_priv->plane_to_crtc_mapping[intel_crtc->plane] = &intel_crtc->base;
12038 dev_priv->pipe_to_crtc_mapping[intel_crtc->pipe] = &intel_crtc->base;
12040 INIT_WORK(&intel_crtc->mmio_flip.work, intel_mmio_flip_work_func);
12042 drm_crtc_helper_add(&intel_crtc->base, &intel_helper_funcs);
12044 WARN_ON(drm_crtc_index(&intel_crtc->base) != intel_crtc->pipe);
12049 drm_plane_cleanup(primary);
12051 drm_plane_cleanup(cursor);
12055 enum pipe intel_get_pipe_from_connector(struct intel_connector *connector)
12057 struct drm_encoder *encoder = connector->base.encoder;
12058 struct drm_device *dev = connector->base.dev;
12060 WARN_ON(!drm_modeset_is_locked(&dev->mode_config.connection_mutex));
12062 if (!encoder || WARN_ON(!encoder->crtc))
12063 return INVALID_PIPE;
12065 return to_intel_crtc(encoder->crtc)->pipe;
12068 int intel_get_pipe_from_crtc_id(struct drm_device *dev, void *data,
12069 struct drm_file *file)
12071 struct drm_i915_get_pipe_from_crtc_id *pipe_from_crtc_id = data;
12072 struct drm_crtc *drmmode_crtc;
12073 struct intel_crtc *crtc;
12075 if (!drm_core_check_feature(dev, DRIVER_MODESET))
12078 drmmode_crtc = drm_crtc_find(dev, pipe_from_crtc_id->crtc_id);
12080 if (!drmmode_crtc) {
12081 DRM_ERROR("no such CRTC id\n");
12085 crtc = to_intel_crtc(drmmode_crtc);
12086 pipe_from_crtc_id->pipe = crtc->pipe;
12091 static int intel_encoder_clones(struct intel_encoder *encoder)
12093 struct drm_device *dev = encoder->base.dev;
12094 struct intel_encoder *source_encoder;
12095 int index_mask = 0;
12098 for_each_intel_encoder(dev, source_encoder) {
12099 if (encoders_cloneable(encoder, source_encoder))
12100 index_mask |= (1 << entry);
12108 static bool has_edp_a(struct drm_device *dev)
12110 struct drm_i915_private *dev_priv = dev->dev_private;
12112 if (!IS_MOBILE(dev))
12115 if ((I915_READ(DP_A) & DP_DETECTED) == 0)
12118 if (IS_GEN5(dev) && (I915_READ(FUSE_STRAP) & ILK_eDP_A_DISABLE))
12124 const char *intel_output_name(int output)
12126 static const char *names[] = {
12127 [INTEL_OUTPUT_UNUSED] = "Unused",
12128 [INTEL_OUTPUT_ANALOG] = "Analog",
12129 [INTEL_OUTPUT_DVO] = "DVO",
12130 [INTEL_OUTPUT_SDVO] = "SDVO",
12131 [INTEL_OUTPUT_LVDS] = "LVDS",
12132 [INTEL_OUTPUT_TVOUT] = "TV",
12133 [INTEL_OUTPUT_HDMI] = "HDMI",
12134 [INTEL_OUTPUT_DISPLAYPORT] = "DisplayPort",
12135 [INTEL_OUTPUT_EDP] = "eDP",
12136 [INTEL_OUTPUT_DSI] = "DSI",
12137 [INTEL_OUTPUT_UNKNOWN] = "Unknown",
12140 if (output < 0 || output >= ARRAY_SIZE(names) || !names[output])
12143 return names[output];
12146 static bool intel_crt_present(struct drm_device *dev)
12148 struct drm_i915_private *dev_priv = dev->dev_private;
12150 if (INTEL_INFO(dev)->gen >= 9)
12153 if (IS_HSW_ULT(dev) || IS_BDW_ULT(dev))
12156 if (IS_CHERRYVIEW(dev))
12159 if (IS_VALLEYVIEW(dev) && !dev_priv->vbt.int_crt_support)
12165 static void intel_setup_outputs(struct drm_device *dev)
12167 struct drm_i915_private *dev_priv = dev->dev_private;
12168 struct intel_encoder *encoder;
12169 bool dpd_is_edp = false;
12171 intel_lvds_init(dev);
12173 if (intel_crt_present(dev))
12174 intel_crt_init(dev);
12176 if (HAS_DDI(dev)) {
12179 /* Haswell uses DDI functions to detect digital outputs */
12180 found = I915_READ(DDI_BUF_CTL_A) & DDI_INIT_DISPLAY_DETECTED;
12181 /* DDI A only supports eDP */
12183 intel_ddi_init(dev, PORT_A);
12185 /* DDI B, C and D detection is indicated by the SFUSE_STRAP
12187 found = I915_READ(SFUSE_STRAP);
12189 if (found & SFUSE_STRAP_DDIB_DETECTED)
12190 intel_ddi_init(dev, PORT_B);
12191 if (found & SFUSE_STRAP_DDIC_DETECTED)
12192 intel_ddi_init(dev, PORT_C);
12193 if (found & SFUSE_STRAP_DDID_DETECTED)
12194 intel_ddi_init(dev, PORT_D);
12195 } else if (HAS_PCH_SPLIT(dev)) {
12197 dpd_is_edp = intel_dp_is_edp(dev, PORT_D);
12199 if (has_edp_a(dev))
12200 intel_dp_init(dev, DP_A, PORT_A);
12202 if (I915_READ(PCH_HDMIB) & SDVO_DETECTED) {
12203 /* PCH SDVOB multiplex with HDMIB */
12204 found = intel_sdvo_init(dev, PCH_SDVOB, true);
12206 intel_hdmi_init(dev, PCH_HDMIB, PORT_B);
12207 if (!found && (I915_READ(PCH_DP_B) & DP_DETECTED))
12208 intel_dp_init(dev, PCH_DP_B, PORT_B);
12211 if (I915_READ(PCH_HDMIC) & SDVO_DETECTED)
12212 intel_hdmi_init(dev, PCH_HDMIC, PORT_C);
12214 if (!dpd_is_edp && I915_READ(PCH_HDMID) & SDVO_DETECTED)
12215 intel_hdmi_init(dev, PCH_HDMID, PORT_D);
12217 if (I915_READ(PCH_DP_C) & DP_DETECTED)
12218 intel_dp_init(dev, PCH_DP_C, PORT_C);
12220 if (I915_READ(PCH_DP_D) & DP_DETECTED)
12221 intel_dp_init(dev, PCH_DP_D, PORT_D);
12222 } else if (IS_VALLEYVIEW(dev)) {
12224 * The DP_DETECTED bit is the latched state of the DDC
12225 * SDA pin at boot. However since eDP doesn't require DDC
12226 * (no way to plug in a DP->HDMI dongle) the DDC pins for
12227 * eDP ports may have been muxed to an alternate function.
12228 * Thus we can't rely on the DP_DETECTED bit alone to detect
12229 * eDP ports. Consult the VBT as well as DP_DETECTED to
12230 * detect eDP ports.
12232 if (I915_READ(VLV_DISPLAY_BASE + GEN4_HDMIB) & SDVO_DETECTED)
12233 intel_hdmi_init(dev, VLV_DISPLAY_BASE + GEN4_HDMIB,
12235 if (I915_READ(VLV_DISPLAY_BASE + DP_B) & DP_DETECTED ||
12236 intel_dp_is_edp(dev, PORT_B))
12237 intel_dp_init(dev, VLV_DISPLAY_BASE + DP_B, PORT_B);
12239 if (I915_READ(VLV_DISPLAY_BASE + GEN4_HDMIC) & SDVO_DETECTED)
12240 intel_hdmi_init(dev, VLV_DISPLAY_BASE + GEN4_HDMIC,
12242 if (I915_READ(VLV_DISPLAY_BASE + DP_C) & DP_DETECTED ||
12243 intel_dp_is_edp(dev, PORT_C))
12244 intel_dp_init(dev, VLV_DISPLAY_BASE + DP_C, PORT_C);
12246 if (IS_CHERRYVIEW(dev)) {
12247 if (I915_READ(VLV_DISPLAY_BASE + CHV_HDMID) & SDVO_DETECTED)
12248 intel_hdmi_init(dev, VLV_DISPLAY_BASE + CHV_HDMID,
12250 /* eDP not supported on port D, so don't check VBT */
12251 if (I915_READ(VLV_DISPLAY_BASE + DP_D) & DP_DETECTED)
12252 intel_dp_init(dev, VLV_DISPLAY_BASE + DP_D, PORT_D);
12255 intel_dsi_init(dev);
12256 } else if (SUPPORTS_DIGITAL_OUTPUTS(dev)) {
12257 bool found = false;
12259 if (I915_READ(GEN3_SDVOB) & SDVO_DETECTED) {
12260 DRM_DEBUG_KMS("probing SDVOB\n");
12261 found = intel_sdvo_init(dev, GEN3_SDVOB, true);
12262 if (!found && SUPPORTS_INTEGRATED_HDMI(dev)) {
12263 DRM_DEBUG_KMS("probing HDMI on SDVOB\n");
12264 intel_hdmi_init(dev, GEN4_HDMIB, PORT_B);
12267 if (!found && SUPPORTS_INTEGRATED_DP(dev))
12268 intel_dp_init(dev, DP_B, PORT_B);
12271 /* Before G4X SDVOC doesn't have its own detect register */
12273 if (I915_READ(GEN3_SDVOB) & SDVO_DETECTED) {
12274 DRM_DEBUG_KMS("probing SDVOC\n");
12275 found = intel_sdvo_init(dev, GEN3_SDVOC, false);
12278 if (!found && (I915_READ(GEN3_SDVOC) & SDVO_DETECTED)) {
12280 if (SUPPORTS_INTEGRATED_HDMI(dev)) {
12281 DRM_DEBUG_KMS("probing HDMI on SDVOC\n");
12282 intel_hdmi_init(dev, GEN4_HDMIC, PORT_C);
12284 if (SUPPORTS_INTEGRATED_DP(dev))
12285 intel_dp_init(dev, DP_C, PORT_C);
12288 if (SUPPORTS_INTEGRATED_DP(dev) &&
12289 (I915_READ(DP_D) & DP_DETECTED))
12290 intel_dp_init(dev, DP_D, PORT_D);
12291 } else if (IS_GEN2(dev))
12292 intel_dvo_init(dev);
12294 if (SUPPORTS_TV(dev))
12295 intel_tv_init(dev);
12297 intel_edp_psr_init(dev);
12299 for_each_intel_encoder(dev, encoder) {
12300 encoder->base.possible_crtcs = encoder->crtc_mask;
12301 encoder->base.possible_clones =
12302 intel_encoder_clones(encoder);
12305 intel_init_pch_refclk(dev);
12307 drm_helper_move_panel_connectors_to_head(dev);
12310 static void intel_user_framebuffer_destroy(struct drm_framebuffer *fb)
12312 struct drm_device *dev = fb->dev;
12313 struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
12315 drm_framebuffer_cleanup(fb);
12316 mutex_lock(&dev->struct_mutex);
12317 WARN_ON(!intel_fb->obj->framebuffer_references--);
12318 drm_gem_object_unreference(&intel_fb->obj->base);
12319 mutex_unlock(&dev->struct_mutex);
12323 static int intel_user_framebuffer_create_handle(struct drm_framebuffer *fb,
12324 struct drm_file *file,
12325 unsigned int *handle)
12327 struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
12328 struct drm_i915_gem_object *obj = intel_fb->obj;
12330 return drm_gem_handle_create(file, &obj->base, handle);
12333 static const struct drm_framebuffer_funcs intel_fb_funcs = {
12334 .destroy = intel_user_framebuffer_destroy,
12335 .create_handle = intel_user_framebuffer_create_handle,
12338 static int intel_framebuffer_init(struct drm_device *dev,
12339 struct intel_framebuffer *intel_fb,
12340 struct drm_mode_fb_cmd2 *mode_cmd,
12341 struct drm_i915_gem_object *obj)
12343 int aligned_height;
12347 WARN_ON(!mutex_is_locked(&dev->struct_mutex));
12349 if (obj->tiling_mode == I915_TILING_Y) {
12350 DRM_DEBUG("hardware does not support tiling Y\n");
12354 if (mode_cmd->pitches[0] & 63) {
12355 DRM_DEBUG("pitch (%d) must be at least 64 byte aligned\n",
12356 mode_cmd->pitches[0]);
12360 if (INTEL_INFO(dev)->gen >= 5 && !IS_VALLEYVIEW(dev)) {
12361 pitch_limit = 32*1024;
12362 } else if (INTEL_INFO(dev)->gen >= 4) {
12363 if (obj->tiling_mode)
12364 pitch_limit = 16*1024;
12366 pitch_limit = 32*1024;
12367 } else if (INTEL_INFO(dev)->gen >= 3) {
12368 if (obj->tiling_mode)
12369 pitch_limit = 8*1024;
12371 pitch_limit = 16*1024;
12373 /* XXX DSPC is limited to 4k tiled */
12374 pitch_limit = 8*1024;
12376 if (mode_cmd->pitches[0] > pitch_limit) {
12377 DRM_DEBUG("%s pitch (%d) must be at less than %d\n",
12378 obj->tiling_mode ? "tiled" : "linear",
12379 mode_cmd->pitches[0], pitch_limit);
12383 if (obj->tiling_mode != I915_TILING_NONE &&
12384 mode_cmd->pitches[0] != obj->stride) {
12385 DRM_DEBUG("pitch (%d) must match tiling stride (%d)\n",
12386 mode_cmd->pitches[0], obj->stride);
12390 /* Reject formats not supported by any plane early. */
12391 switch (mode_cmd->pixel_format) {
12392 case DRM_FORMAT_C8:
12393 case DRM_FORMAT_RGB565:
12394 case DRM_FORMAT_XRGB8888:
12395 case DRM_FORMAT_ARGB8888:
12397 case DRM_FORMAT_XRGB1555:
12398 case DRM_FORMAT_ARGB1555:
12399 if (INTEL_INFO(dev)->gen > 3) {
12400 DRM_DEBUG("unsupported pixel format: %s\n",
12401 drm_get_format_name(mode_cmd->pixel_format));
12405 case DRM_FORMAT_XBGR8888:
12406 case DRM_FORMAT_ABGR8888:
12407 case DRM_FORMAT_XRGB2101010:
12408 case DRM_FORMAT_ARGB2101010:
12409 case DRM_FORMAT_XBGR2101010:
12410 case DRM_FORMAT_ABGR2101010:
12411 if (INTEL_INFO(dev)->gen < 4) {
12412 DRM_DEBUG("unsupported pixel format: %s\n",
12413 drm_get_format_name(mode_cmd->pixel_format));
12417 case DRM_FORMAT_YUYV:
12418 case DRM_FORMAT_UYVY:
12419 case DRM_FORMAT_YVYU:
12420 case DRM_FORMAT_VYUY:
12421 if (INTEL_INFO(dev)->gen < 5) {
12422 DRM_DEBUG("unsupported pixel format: %s\n",
12423 drm_get_format_name(mode_cmd->pixel_format));
12428 DRM_DEBUG("unsupported pixel format: %s\n",
12429 drm_get_format_name(mode_cmd->pixel_format));
12433 /* FIXME need to adjust LINOFF/TILEOFF accordingly. */
12434 if (mode_cmd->offsets[0] != 0)
12437 aligned_height = intel_align_height(dev, mode_cmd->height,
12439 /* FIXME drm helper for size checks (especially planar formats)? */
12440 if (obj->base.size < aligned_height * mode_cmd->pitches[0])
12443 drm_helper_mode_fill_fb_struct(&intel_fb->base, mode_cmd);
12444 intel_fb->obj = obj;
12445 intel_fb->obj->framebuffer_references++;
12447 ret = drm_framebuffer_init(dev, &intel_fb->base, &intel_fb_funcs);
12449 DRM_ERROR("framebuffer init failed %d\n", ret);
12456 static struct drm_framebuffer *
12457 intel_user_framebuffer_create(struct drm_device *dev,
12458 struct drm_file *filp,
12459 struct drm_mode_fb_cmd2 *mode_cmd)
12461 struct drm_i915_gem_object *obj;
12463 obj = to_intel_bo(drm_gem_object_lookup(dev, filp,
12464 mode_cmd->handles[0]));
12465 if (&obj->base == NULL)
12466 return ERR_PTR(-ENOENT);
12468 return intel_framebuffer_create(dev, mode_cmd, obj);
12471 #ifndef CONFIG_DRM_I915_FBDEV
12472 static inline void intel_fbdev_output_poll_changed(struct drm_device *dev)
12477 static const struct drm_mode_config_funcs intel_mode_funcs = {
12478 .fb_create = intel_user_framebuffer_create,
12479 .output_poll_changed = intel_fbdev_output_poll_changed,
12482 /* Set up chip specific display functions */
12483 static void intel_init_display(struct drm_device *dev)
12485 struct drm_i915_private *dev_priv = dev->dev_private;
12487 if (HAS_PCH_SPLIT(dev) || IS_G4X(dev))
12488 dev_priv->display.find_dpll = g4x_find_best_dpll;
12489 else if (IS_CHERRYVIEW(dev))
12490 dev_priv->display.find_dpll = chv_find_best_dpll;
12491 else if (IS_VALLEYVIEW(dev))
12492 dev_priv->display.find_dpll = vlv_find_best_dpll;
12493 else if (IS_PINEVIEW(dev))
12494 dev_priv->display.find_dpll = pnv_find_best_dpll;
12496 dev_priv->display.find_dpll = i9xx_find_best_dpll;
12498 if (HAS_DDI(dev)) {
12499 dev_priv->display.get_pipe_config = haswell_get_pipe_config;
12500 dev_priv->display.get_plane_config = ironlake_get_plane_config;
12501 dev_priv->display.crtc_compute_clock =
12502 haswell_crtc_compute_clock;
12503 dev_priv->display.crtc_enable = haswell_crtc_enable;
12504 dev_priv->display.crtc_disable = haswell_crtc_disable;
12505 dev_priv->display.off = ironlake_crtc_off;
12506 if (INTEL_INFO(dev)->gen >= 9)
12507 dev_priv->display.update_primary_plane =
12508 skylake_update_primary_plane;
12510 dev_priv->display.update_primary_plane =
12511 ironlake_update_primary_plane;
12512 } else if (HAS_PCH_SPLIT(dev)) {
12513 dev_priv->display.get_pipe_config = ironlake_get_pipe_config;
12514 dev_priv->display.get_plane_config = ironlake_get_plane_config;
12515 dev_priv->display.crtc_compute_clock =
12516 ironlake_crtc_compute_clock;
12517 dev_priv->display.crtc_enable = ironlake_crtc_enable;
12518 dev_priv->display.crtc_disable = ironlake_crtc_disable;
12519 dev_priv->display.off = ironlake_crtc_off;
12520 dev_priv->display.update_primary_plane =
12521 ironlake_update_primary_plane;
12522 } else if (IS_VALLEYVIEW(dev)) {
12523 dev_priv->display.get_pipe_config = i9xx_get_pipe_config;
12524 dev_priv->display.get_plane_config = i9xx_get_plane_config;
12525 dev_priv->display.crtc_compute_clock = i9xx_crtc_compute_clock;
12526 dev_priv->display.crtc_enable = valleyview_crtc_enable;
12527 dev_priv->display.crtc_disable = i9xx_crtc_disable;
12528 dev_priv->display.off = i9xx_crtc_off;
12529 dev_priv->display.update_primary_plane =
12530 i9xx_update_primary_plane;
12532 dev_priv->display.get_pipe_config = i9xx_get_pipe_config;
12533 dev_priv->display.get_plane_config = i9xx_get_plane_config;
12534 dev_priv->display.crtc_compute_clock = i9xx_crtc_compute_clock;
12535 dev_priv->display.crtc_enable = i9xx_crtc_enable;
12536 dev_priv->display.crtc_disable = i9xx_crtc_disable;
12537 dev_priv->display.off = i9xx_crtc_off;
12538 dev_priv->display.update_primary_plane =
12539 i9xx_update_primary_plane;
12542 /* Returns the core display clock speed */
12543 if (IS_VALLEYVIEW(dev))
12544 dev_priv->display.get_display_clock_speed =
12545 valleyview_get_display_clock_speed;
12546 else if (IS_I945G(dev) || (IS_G33(dev) && !IS_PINEVIEW_M(dev)))
12547 dev_priv->display.get_display_clock_speed =
12548 i945_get_display_clock_speed;
12549 else if (IS_I915G(dev))
12550 dev_priv->display.get_display_clock_speed =
12551 i915_get_display_clock_speed;
12552 else if (IS_I945GM(dev) || IS_845G(dev))
12553 dev_priv->display.get_display_clock_speed =
12554 i9xx_misc_get_display_clock_speed;
12555 else if (IS_PINEVIEW(dev))
12556 dev_priv->display.get_display_clock_speed =
12557 pnv_get_display_clock_speed;
12558 else if (IS_I915GM(dev))
12559 dev_priv->display.get_display_clock_speed =
12560 i915gm_get_display_clock_speed;
12561 else if (IS_I865G(dev))
12562 dev_priv->display.get_display_clock_speed =
12563 i865_get_display_clock_speed;
12564 else if (IS_I85X(dev))
12565 dev_priv->display.get_display_clock_speed =
12566 i855_get_display_clock_speed;
12567 else /* 852, 830 */
12568 dev_priv->display.get_display_clock_speed =
12569 i830_get_display_clock_speed;
12571 if (IS_GEN5(dev)) {
12572 dev_priv->display.fdi_link_train = ironlake_fdi_link_train;
12573 } else if (IS_GEN6(dev)) {
12574 dev_priv->display.fdi_link_train = gen6_fdi_link_train;
12575 } else if (IS_IVYBRIDGE(dev)) {
12576 /* FIXME: detect B0+ stepping and use auto training */
12577 dev_priv->display.fdi_link_train = ivb_manual_fdi_link_train;
12578 dev_priv->display.modeset_global_resources =
12579 ivb_modeset_global_resources;
12580 } else if (IS_HASWELL(dev) || IS_BROADWELL(dev)) {
12581 dev_priv->display.fdi_link_train = hsw_fdi_link_train;
12582 } else if (IS_VALLEYVIEW(dev)) {
12583 dev_priv->display.modeset_global_resources =
12584 valleyview_modeset_global_resources;
12587 /* Default just returns -ENODEV to indicate unsupported */
12588 dev_priv->display.queue_flip = intel_default_queue_flip;
12590 switch (INTEL_INFO(dev)->gen) {
12592 dev_priv->display.queue_flip = intel_gen2_queue_flip;
12596 dev_priv->display.queue_flip = intel_gen3_queue_flip;
12601 dev_priv->display.queue_flip = intel_gen4_queue_flip;
12605 dev_priv->display.queue_flip = intel_gen6_queue_flip;
12608 case 8: /* FIXME(BDW): Check that the gen8 RCS flip works. */
12609 dev_priv->display.queue_flip = intel_gen7_queue_flip;
12613 intel_panel_init_backlight_funcs(dev);
12615 mutex_init(&dev_priv->pps_mutex);
12619 * Some BIOSes insist on assuming the GPU's pipe A is enabled at suspend,
12620 * resume, or other times. This quirk makes sure that's the case for
12621 * affected systems.
12623 static void quirk_pipea_force(struct drm_device *dev)
12625 struct drm_i915_private *dev_priv = dev->dev_private;
12627 dev_priv->quirks |= QUIRK_PIPEA_FORCE;
12628 DRM_INFO("applying pipe a force quirk\n");
12631 static void quirk_pipeb_force(struct drm_device *dev)
12633 struct drm_i915_private *dev_priv = dev->dev_private;
12635 dev_priv->quirks |= QUIRK_PIPEB_FORCE;
12636 DRM_INFO("applying pipe b force quirk\n");
12640 * Some machines (Lenovo U160) do not work with SSC on LVDS for some reason
12642 static void quirk_ssc_force_disable(struct drm_device *dev)
12644 struct drm_i915_private *dev_priv = dev->dev_private;
12645 dev_priv->quirks |= QUIRK_LVDS_SSC_DISABLE;
12646 DRM_INFO("applying lvds SSC disable quirk\n");
12650 * A machine (e.g. Acer Aspire 5734Z) may need to invert the panel backlight
12653 static void quirk_invert_brightness(struct drm_device *dev)
12655 struct drm_i915_private *dev_priv = dev->dev_private;
12656 dev_priv->quirks |= QUIRK_INVERT_BRIGHTNESS;
12657 DRM_INFO("applying inverted panel brightness quirk\n");
12660 /* Some VBT's incorrectly indicate no backlight is present */
12661 static void quirk_backlight_present(struct drm_device *dev)
12663 struct drm_i915_private *dev_priv = dev->dev_private;
12664 dev_priv->quirks |= QUIRK_BACKLIGHT_PRESENT;
12665 DRM_INFO("applying backlight present quirk\n");
12668 struct intel_quirk {
12670 int subsystem_vendor;
12671 int subsystem_device;
12672 void (*hook)(struct drm_device *dev);
12675 /* For systems that don't have a meaningful PCI subdevice/subvendor ID */
12676 struct intel_dmi_quirk {
12677 void (*hook)(struct drm_device *dev);
12678 const struct dmi_system_id (*dmi_id_list)[];
12681 static int intel_dmi_reverse_brightness(const struct dmi_system_id *id)
12683 DRM_INFO("Backlight polarity reversed on %s\n", id->ident);
12687 static const struct intel_dmi_quirk intel_dmi_quirks[] = {
12689 .dmi_id_list = &(const struct dmi_system_id[]) {
12691 .callback = intel_dmi_reverse_brightness,
12692 .ident = "NCR Corporation",
12693 .matches = {DMI_MATCH(DMI_SYS_VENDOR, "NCR Corporation"),
12694 DMI_MATCH(DMI_PRODUCT_NAME, ""),
12697 { } /* terminating entry */
12699 .hook = quirk_invert_brightness,
12703 static struct intel_quirk intel_quirks[] = {
12704 /* HP Mini needs pipe A force quirk (LP: #322104) */
12705 { 0x27ae, 0x103c, 0x361a, quirk_pipea_force },
12707 /* Toshiba Protege R-205, S-209 needs pipe A force quirk */
12708 { 0x2592, 0x1179, 0x0001, quirk_pipea_force },
12710 /* ThinkPad T60 needs pipe A force quirk (bug #16494) */
12711 { 0x2782, 0x17aa, 0x201a, quirk_pipea_force },
12713 /* 830 needs to leave pipe A & dpll A up */
12714 { 0x3577, PCI_ANY_ID, PCI_ANY_ID, quirk_pipea_force },
12716 /* 830 needs to leave pipe B & dpll B up */
12717 { 0x3577, PCI_ANY_ID, PCI_ANY_ID, quirk_pipeb_force },
12719 /* Lenovo U160 cannot use SSC on LVDS */
12720 { 0x0046, 0x17aa, 0x3920, quirk_ssc_force_disable },
12722 /* Sony Vaio Y cannot use SSC on LVDS */
12723 { 0x0046, 0x104d, 0x9076, quirk_ssc_force_disable },
12725 /* Acer Aspire 5734Z must invert backlight brightness */
12726 { 0x2a42, 0x1025, 0x0459, quirk_invert_brightness },
12728 /* Acer/eMachines G725 */
12729 { 0x2a42, 0x1025, 0x0210, quirk_invert_brightness },
12731 /* Acer/eMachines e725 */
12732 { 0x2a42, 0x1025, 0x0212, quirk_invert_brightness },
12734 /* Acer/Packard Bell NCL20 */
12735 { 0x2a42, 0x1025, 0x034b, quirk_invert_brightness },
12737 /* Acer Aspire 4736Z */
12738 { 0x2a42, 0x1025, 0x0260, quirk_invert_brightness },
12740 /* Acer Aspire 5336 */
12741 { 0x2a42, 0x1025, 0x048a, quirk_invert_brightness },
12743 /* Acer C720 and C720P Chromebooks (Celeron 2955U) have backlights */
12744 { 0x0a06, 0x1025, 0x0a11, quirk_backlight_present },
12746 /* Acer C720 Chromebook (Core i3 4005U) */
12747 { 0x0a16, 0x1025, 0x0a11, quirk_backlight_present },
12749 /* Toshiba CB35 Chromebook (Celeron 2955U) */
12750 { 0x0a06, 0x1179, 0x0a88, quirk_backlight_present },
12752 /* HP Chromebook 14 (Celeron 2955U) */
12753 { 0x0a06, 0x103c, 0x21ed, quirk_backlight_present },
12756 static void intel_init_quirks(struct drm_device *dev)
12758 struct pci_dev *d = dev->pdev;
12761 for (i = 0; i < ARRAY_SIZE(intel_quirks); i++) {
12762 struct intel_quirk *q = &intel_quirks[i];
12764 if (d->device == q->device &&
12765 (d->subsystem_vendor == q->subsystem_vendor ||
12766 q->subsystem_vendor == PCI_ANY_ID) &&
12767 (d->subsystem_device == q->subsystem_device ||
12768 q->subsystem_device == PCI_ANY_ID))
12771 for (i = 0; i < ARRAY_SIZE(intel_dmi_quirks); i++) {
12772 if (dmi_check_system(*intel_dmi_quirks[i].dmi_id_list) != 0)
12773 intel_dmi_quirks[i].hook(dev);
12777 /* Disable the VGA plane that we never use */
12778 static void i915_disable_vga(struct drm_device *dev)
12780 struct drm_i915_private *dev_priv = dev->dev_private;
12782 u32 vga_reg = i915_vgacntrl_reg(dev);
12784 /* WaEnableVGAAccessThroughIOPort:ctg,elk,ilk,snb,ivb,vlv,hsw */
12785 vga_get_uninterruptible(dev->pdev, VGA_RSRC_LEGACY_IO);
12786 outb(SR01, VGA_SR_INDEX);
12787 sr1 = inb(VGA_SR_DATA);
12788 outb(sr1 | 1<<5, VGA_SR_DATA);
12789 vga_put(dev->pdev, VGA_RSRC_LEGACY_IO);
12793 * Fujitsu-Siemens Lifebook S6010 (830) has problems resuming
12794 * from S3 without preserving (some of?) the other bits.
12796 I915_WRITE(vga_reg, dev_priv->bios_vgacntr | VGA_DISP_DISABLE);
12797 POSTING_READ(vga_reg);
12800 void intel_modeset_init_hw(struct drm_device *dev)
12802 intel_prepare_ddi(dev);
12804 if (IS_VALLEYVIEW(dev))
12805 vlv_update_cdclk(dev);
12807 intel_init_clock_gating(dev);
12809 intel_enable_gt_powersave(dev);
12812 void intel_modeset_init(struct drm_device *dev)
12814 struct drm_i915_private *dev_priv = dev->dev_private;
12817 struct intel_crtc *crtc;
12819 drm_mode_config_init(dev);
12821 dev->mode_config.min_width = 0;
12822 dev->mode_config.min_height = 0;
12824 dev->mode_config.preferred_depth = 24;
12825 dev->mode_config.prefer_shadow = 1;
12827 dev->mode_config.funcs = &intel_mode_funcs;
12829 intel_init_quirks(dev);
12831 intel_init_pm(dev);
12833 if (INTEL_INFO(dev)->num_pipes == 0)
12836 intel_init_display(dev);
12837 intel_init_audio(dev);
12839 if (IS_GEN2(dev)) {
12840 dev->mode_config.max_width = 2048;
12841 dev->mode_config.max_height = 2048;
12842 } else if (IS_GEN3(dev)) {
12843 dev->mode_config.max_width = 4096;
12844 dev->mode_config.max_height = 4096;
12846 dev->mode_config.max_width = 8192;
12847 dev->mode_config.max_height = 8192;
12850 if (IS_845G(dev) || IS_I865G(dev)) {
12851 dev->mode_config.cursor_width = IS_845G(dev) ? 64 : 512;
12852 dev->mode_config.cursor_height = 1023;
12853 } else if (IS_GEN2(dev)) {
12854 dev->mode_config.cursor_width = GEN2_CURSOR_WIDTH;
12855 dev->mode_config.cursor_height = GEN2_CURSOR_HEIGHT;
12857 dev->mode_config.cursor_width = MAX_CURSOR_WIDTH;
12858 dev->mode_config.cursor_height = MAX_CURSOR_HEIGHT;
12861 dev->mode_config.fb_base = dev_priv->gtt.mappable_base;
12863 DRM_DEBUG_KMS("%d display pipe%s available.\n",
12864 INTEL_INFO(dev)->num_pipes,
12865 INTEL_INFO(dev)->num_pipes > 1 ? "s" : "");
12867 for_each_pipe(dev_priv, pipe) {
12868 intel_crtc_init(dev, pipe);
12869 for_each_sprite(pipe, sprite) {
12870 ret = intel_plane_init(dev, pipe, sprite);
12872 DRM_DEBUG_KMS("pipe %c sprite %c init failed: %d\n",
12873 pipe_name(pipe), sprite_name(pipe, sprite), ret);
12877 intel_init_dpio(dev);
12879 intel_shared_dpll_init(dev);
12881 /* save the BIOS value before clobbering it */
12882 dev_priv->bios_vgacntr = I915_READ(i915_vgacntrl_reg(dev));
12883 /* Just disable it once at startup */
12884 i915_disable_vga(dev);
12885 intel_setup_outputs(dev);
12887 /* Just in case the BIOS is doing something questionable. */
12888 intel_disable_fbc(dev);
12890 drm_modeset_lock_all(dev);
12891 intel_modeset_setup_hw_state(dev, false);
12892 drm_modeset_unlock_all(dev);
12894 for_each_intel_crtc(dev, crtc) {
12899 * Note that reserving the BIOS fb up front prevents us
12900 * from stuffing other stolen allocations like the ring
12901 * on top. This prevents some ugliness at boot time, and
12902 * can even allow for smooth boot transitions if the BIOS
12903 * fb is large enough for the active pipe configuration.
12905 if (dev_priv->display.get_plane_config) {
12906 dev_priv->display.get_plane_config(crtc,
12907 &crtc->plane_config);
12909 * If the fb is shared between multiple heads, we'll
12910 * just get the first one.
12912 intel_find_plane_obj(crtc, &crtc->plane_config);
12917 static void intel_enable_pipe_a(struct drm_device *dev)
12919 struct intel_connector *connector;
12920 struct drm_connector *crt = NULL;
12921 struct intel_load_detect_pipe load_detect_temp;
12922 struct drm_modeset_acquire_ctx *ctx = dev->mode_config.acquire_ctx;
12924 /* We can't just switch on the pipe A, we need to set things up with a
12925 * proper mode and output configuration. As a gross hack, enable pipe A
12926 * by enabling the load detect pipe once. */
12927 list_for_each_entry(connector,
12928 &dev->mode_config.connector_list,
12930 if (connector->encoder->type == INTEL_OUTPUT_ANALOG) {
12931 crt = &connector->base;
12939 if (intel_get_load_detect_pipe(crt, NULL, &load_detect_temp, ctx))
12940 intel_release_load_detect_pipe(crt, &load_detect_temp);
12944 intel_check_plane_mapping(struct intel_crtc *crtc)
12946 struct drm_device *dev = crtc->base.dev;
12947 struct drm_i915_private *dev_priv = dev->dev_private;
12950 if (INTEL_INFO(dev)->num_pipes == 1)
12953 reg = DSPCNTR(!crtc->plane);
12954 val = I915_READ(reg);
12956 if ((val & DISPLAY_PLANE_ENABLE) &&
12957 (!!(val & DISPPLANE_SEL_PIPE_MASK) == crtc->pipe))
12963 static void intel_sanitize_crtc(struct intel_crtc *crtc)
12965 struct drm_device *dev = crtc->base.dev;
12966 struct drm_i915_private *dev_priv = dev->dev_private;
12969 /* Clear any frame start delays used for debugging left by the BIOS */
12970 reg = PIPECONF(crtc->config.cpu_transcoder);
12971 I915_WRITE(reg, I915_READ(reg) & ~PIPECONF_FRAME_START_DELAY_MASK);
12973 /* restore vblank interrupts to correct state */
12974 if (crtc->active) {
12975 update_scanline_offset(crtc);
12976 drm_vblank_on(dev, crtc->pipe);
12978 drm_vblank_off(dev, crtc->pipe);
12980 /* We need to sanitize the plane -> pipe mapping first because this will
12981 * disable the crtc (and hence change the state) if it is wrong. Note
12982 * that gen4+ has a fixed plane -> pipe mapping. */
12983 if (INTEL_INFO(dev)->gen < 4 && !intel_check_plane_mapping(crtc)) {
12984 struct intel_connector *connector;
12987 DRM_DEBUG_KMS("[CRTC:%d] wrong plane connection detected!\n",
12988 crtc->base.base.id);
12990 /* Pipe has the wrong plane attached and the plane is active.
12991 * Temporarily change the plane mapping and disable everything
12993 plane = crtc->plane;
12994 crtc->plane = !plane;
12995 crtc->primary_enabled = true;
12996 dev_priv->display.crtc_disable(&crtc->base);
12997 crtc->plane = plane;
12999 /* ... and break all links. */
13000 list_for_each_entry(connector, &dev->mode_config.connector_list,
13002 if (connector->encoder->base.crtc != &crtc->base)
13005 connector->base.dpms = DRM_MODE_DPMS_OFF;
13006 connector->base.encoder = NULL;
13008 /* multiple connectors may have the same encoder:
13009 * handle them and break crtc link separately */
13010 list_for_each_entry(connector, &dev->mode_config.connector_list,
13012 if (connector->encoder->base.crtc == &crtc->base) {
13013 connector->encoder->base.crtc = NULL;
13014 connector->encoder->connectors_active = false;
13017 WARN_ON(crtc->active);
13018 crtc->base.enabled = false;
13021 if (dev_priv->quirks & QUIRK_PIPEA_FORCE &&
13022 crtc->pipe == PIPE_A && !crtc->active) {
13023 /* BIOS forgot to enable pipe A, this mostly happens after
13024 * resume. Force-enable the pipe to fix this, the update_dpms
13025 * call below we restore the pipe to the right state, but leave
13026 * the required bits on. */
13027 intel_enable_pipe_a(dev);
13030 /* Adjust the state of the output pipe according to whether we
13031 * have active connectors/encoders. */
13032 intel_crtc_update_dpms(&crtc->base);
13034 if (crtc->active != crtc->base.enabled) {
13035 struct intel_encoder *encoder;
13037 /* This can happen either due to bugs in the get_hw_state
13038 * functions or because the pipe is force-enabled due to the
13040 DRM_DEBUG_KMS("[CRTC:%d] hw state adjusted, was %s, now %s\n",
13041 crtc->base.base.id,
13042 crtc->base.enabled ? "enabled" : "disabled",
13043 crtc->active ? "enabled" : "disabled");
13045 crtc->base.enabled = crtc->active;
13047 /* Because we only establish the connector -> encoder ->
13048 * crtc links if something is active, this means the
13049 * crtc is now deactivated. Break the links. connector
13050 * -> encoder links are only establish when things are
13051 * actually up, hence no need to break them. */
13052 WARN_ON(crtc->active);
13054 for_each_encoder_on_crtc(dev, &crtc->base, encoder) {
13055 WARN_ON(encoder->connectors_active);
13056 encoder->base.crtc = NULL;
13060 if (crtc->active || HAS_GMCH_DISPLAY(dev)) {
13062 * We start out with underrun reporting disabled to avoid races.
13063 * For correct bookkeeping mark this on active crtcs.
13065 * Also on gmch platforms we dont have any hardware bits to
13066 * disable the underrun reporting. Which means we need to start
13067 * out with underrun reporting disabled also on inactive pipes,
13068 * since otherwise we'll complain about the garbage we read when
13069 * e.g. coming up after runtime pm.
13071 * No protection against concurrent access is required - at
13072 * worst a fifo underrun happens which also sets this to false.
13074 crtc->cpu_fifo_underrun_disabled = true;
13075 crtc->pch_fifo_underrun_disabled = true;
13079 static void intel_sanitize_encoder(struct intel_encoder *encoder)
13081 struct intel_connector *connector;
13082 struct drm_device *dev = encoder->base.dev;
13084 /* We need to check both for a crtc link (meaning that the
13085 * encoder is active and trying to read from a pipe) and the
13086 * pipe itself being active. */
13087 bool has_active_crtc = encoder->base.crtc &&
13088 to_intel_crtc(encoder->base.crtc)->active;
13090 if (encoder->connectors_active && !has_active_crtc) {
13091 DRM_DEBUG_KMS("[ENCODER:%d:%s] has active connectors but no active pipe!\n",
13092 encoder->base.base.id,
13093 encoder->base.name);
13095 /* Connector is active, but has no active pipe. This is
13096 * fallout from our resume register restoring. Disable
13097 * the encoder manually again. */
13098 if (encoder->base.crtc) {
13099 DRM_DEBUG_KMS("[ENCODER:%d:%s] manually disabled\n",
13100 encoder->base.base.id,
13101 encoder->base.name);
13102 encoder->disable(encoder);
13103 if (encoder->post_disable)
13104 encoder->post_disable(encoder);
13106 encoder->base.crtc = NULL;
13107 encoder->connectors_active = false;
13109 /* Inconsistent output/port/pipe state happens presumably due to
13110 * a bug in one of the get_hw_state functions. Or someplace else
13111 * in our code, like the register restore mess on resume. Clamp
13112 * things to off as a safer default. */
13113 list_for_each_entry(connector,
13114 &dev->mode_config.connector_list,
13116 if (connector->encoder != encoder)
13118 connector->base.dpms = DRM_MODE_DPMS_OFF;
13119 connector->base.encoder = NULL;
13122 /* Enabled encoders without active connectors will be fixed in
13123 * the crtc fixup. */
13126 void i915_redisable_vga_power_on(struct drm_device *dev)
13128 struct drm_i915_private *dev_priv = dev->dev_private;
13129 u32 vga_reg = i915_vgacntrl_reg(dev);
13131 if (!(I915_READ(vga_reg) & VGA_DISP_DISABLE)) {
13132 DRM_DEBUG_KMS("Something enabled VGA plane, disabling it\n");
13133 i915_disable_vga(dev);
13137 void i915_redisable_vga(struct drm_device *dev)
13139 struct drm_i915_private *dev_priv = dev->dev_private;
13141 /* This function can be called both from intel_modeset_setup_hw_state or
13142 * at a very early point in our resume sequence, where the power well
13143 * structures are not yet restored. Since this function is at a very
13144 * paranoid "someone might have enabled VGA while we were not looking"
13145 * level, just check if the power well is enabled instead of trying to
13146 * follow the "don't touch the power well if we don't need it" policy
13147 * the rest of the driver uses. */
13148 if (!intel_display_power_is_enabled(dev_priv, POWER_DOMAIN_VGA))
13151 i915_redisable_vga_power_on(dev);
13154 static bool primary_get_hw_state(struct intel_crtc *crtc)
13156 struct drm_i915_private *dev_priv = crtc->base.dev->dev_private;
13161 return I915_READ(DSPCNTR(crtc->plane)) & DISPLAY_PLANE_ENABLE;
13164 static void intel_modeset_readout_hw_state(struct drm_device *dev)
13166 struct drm_i915_private *dev_priv = dev->dev_private;
13168 struct intel_crtc *crtc;
13169 struct intel_encoder *encoder;
13170 struct intel_connector *connector;
13173 for_each_intel_crtc(dev, crtc) {
13174 memset(&crtc->config, 0, sizeof(crtc->config));
13176 crtc->config.quirks |= PIPE_CONFIG_QUIRK_INHERITED_MODE;
13178 crtc->active = dev_priv->display.get_pipe_config(crtc,
13181 crtc->base.enabled = crtc->active;
13182 crtc->primary_enabled = primary_get_hw_state(crtc);
13184 DRM_DEBUG_KMS("[CRTC:%d] hw state readout: %s\n",
13185 crtc->base.base.id,
13186 crtc->active ? "enabled" : "disabled");
13189 for (i = 0; i < dev_priv->num_shared_dpll; i++) {
13190 struct intel_shared_dpll *pll = &dev_priv->shared_dplls[i];
13192 pll->on = pll->get_hw_state(dev_priv, pll,
13193 &pll->config.hw_state);
13195 pll->config.crtc_mask = 0;
13196 for_each_intel_crtc(dev, crtc) {
13197 if (crtc->active && intel_crtc_to_shared_dpll(crtc) == pll) {
13199 pll->config.crtc_mask |= 1 << crtc->pipe;
13203 DRM_DEBUG_KMS("%s hw state readout: crtc_mask 0x%08x, on %i\n",
13204 pll->name, pll->config.crtc_mask, pll->on);
13206 if (pll->config.crtc_mask)
13207 intel_display_power_get(dev_priv, POWER_DOMAIN_PLLS);
13210 for_each_intel_encoder(dev, encoder) {
13213 if (encoder->get_hw_state(encoder, &pipe)) {
13214 crtc = to_intel_crtc(dev_priv->pipe_to_crtc_mapping[pipe]);
13215 encoder->base.crtc = &crtc->base;
13216 encoder->get_config(encoder, &crtc->config);
13218 encoder->base.crtc = NULL;
13221 encoder->connectors_active = false;
13222 DRM_DEBUG_KMS("[ENCODER:%d:%s] hw state readout: %s, pipe %c\n",
13223 encoder->base.base.id,
13224 encoder->base.name,
13225 encoder->base.crtc ? "enabled" : "disabled",
13229 list_for_each_entry(connector, &dev->mode_config.connector_list,
13231 if (connector->get_hw_state(connector)) {
13232 connector->base.dpms = DRM_MODE_DPMS_ON;
13233 connector->encoder->connectors_active = true;
13234 connector->base.encoder = &connector->encoder->base;
13236 connector->base.dpms = DRM_MODE_DPMS_OFF;
13237 connector->base.encoder = NULL;
13239 DRM_DEBUG_KMS("[CONNECTOR:%d:%s] hw state readout: %s\n",
13240 connector->base.base.id,
13241 connector->base.name,
13242 connector->base.encoder ? "enabled" : "disabled");
13246 /* Scan out the current hw modeset state, sanitizes it and maps it into the drm
13247 * and i915 state tracking structures. */
13248 void intel_modeset_setup_hw_state(struct drm_device *dev,
13249 bool force_restore)
13251 struct drm_i915_private *dev_priv = dev->dev_private;
13253 struct intel_crtc *crtc;
13254 struct intel_encoder *encoder;
13257 intel_modeset_readout_hw_state(dev);
13260 * Now that we have the config, copy it to each CRTC struct
13261 * Note that this could go away if we move to using crtc_config
13262 * checking everywhere.
13264 for_each_intel_crtc(dev, crtc) {
13265 if (crtc->active && i915.fastboot) {
13266 intel_mode_from_pipe_config(&crtc->base.mode, &crtc->config);
13267 DRM_DEBUG_KMS("[CRTC:%d] found active mode: ",
13268 crtc->base.base.id);
13269 drm_mode_debug_printmodeline(&crtc->base.mode);
13273 /* HW state is read out, now we need to sanitize this mess. */
13274 for_each_intel_encoder(dev, encoder) {
13275 intel_sanitize_encoder(encoder);
13278 for_each_pipe(dev_priv, pipe) {
13279 crtc = to_intel_crtc(dev_priv->pipe_to_crtc_mapping[pipe]);
13280 intel_sanitize_crtc(crtc);
13281 intel_dump_pipe_config(crtc, &crtc->config, "[setup_hw_state]");
13284 for (i = 0; i < dev_priv->num_shared_dpll; i++) {
13285 struct intel_shared_dpll *pll = &dev_priv->shared_dplls[i];
13287 if (!pll->on || pll->active)
13290 DRM_DEBUG_KMS("%s enabled but not in use, disabling\n", pll->name);
13292 pll->disable(dev_priv, pll);
13297 skl_wm_get_hw_state(dev);
13298 else if (HAS_PCH_SPLIT(dev))
13299 ilk_wm_get_hw_state(dev);
13301 if (force_restore) {
13302 i915_redisable_vga(dev);
13305 * We need to use raw interfaces for restoring state to avoid
13306 * checking (bogus) intermediate states.
13308 for_each_pipe(dev_priv, pipe) {
13309 struct drm_crtc *crtc =
13310 dev_priv->pipe_to_crtc_mapping[pipe];
13312 intel_set_mode(crtc, &crtc->mode, crtc->x, crtc->y,
13313 crtc->primary->fb);
13316 intel_modeset_update_staged_output_state(dev);
13319 intel_modeset_check_state(dev);
13322 void intel_modeset_gem_init(struct drm_device *dev)
13324 struct drm_crtc *c;
13325 struct drm_i915_gem_object *obj;
13327 mutex_lock(&dev->struct_mutex);
13328 intel_init_gt_powersave(dev);
13329 mutex_unlock(&dev->struct_mutex);
13331 intel_modeset_init_hw(dev);
13333 intel_setup_overlay(dev);
13336 * Make sure any fbs we allocated at startup are properly
13337 * pinned & fenced. When we do the allocation it's too early
13340 mutex_lock(&dev->struct_mutex);
13341 for_each_crtc(dev, c) {
13342 obj = intel_fb_obj(c->primary->fb);
13346 if (intel_pin_and_fence_fb_obj(c->primary,
13349 DRM_ERROR("failed to pin boot fb on pipe %d\n",
13350 to_intel_crtc(c)->pipe);
13351 drm_framebuffer_unreference(c->primary->fb);
13352 c->primary->fb = NULL;
13355 mutex_unlock(&dev->struct_mutex);
13357 intel_backlight_register(dev);
13360 void intel_connector_unregister(struct intel_connector *intel_connector)
13362 struct drm_connector *connector = &intel_connector->base;
13364 intel_panel_destroy_backlight(connector);
13365 drm_connector_unregister(connector);
13368 void intel_modeset_cleanup(struct drm_device *dev)
13370 struct drm_i915_private *dev_priv = dev->dev_private;
13371 struct drm_connector *connector;
13373 intel_backlight_unregister(dev);
13376 * Interrupts and polling as the first thing to avoid creating havoc.
13377 * Too much stuff here (turning of rps, connectors, ...) would
13378 * experience fancy races otherwise.
13380 intel_irq_uninstall(dev_priv);
13383 * Due to the hpd irq storm handling the hotplug work can re-arm the
13384 * poll handlers. Hence disable polling after hpd handling is shut down.
13386 drm_kms_helper_poll_fini(dev);
13388 mutex_lock(&dev->struct_mutex);
13390 intel_unregister_dsm_handler();
13392 intel_disable_fbc(dev);
13394 intel_disable_gt_powersave(dev);
13396 ironlake_teardown_rc6(dev);
13398 mutex_unlock(&dev->struct_mutex);
13400 /* flush any delayed tasks or pending work */
13401 flush_scheduled_work();
13403 /* destroy the backlight and sysfs files before encoders/connectors */
13404 list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
13405 struct intel_connector *intel_connector;
13407 intel_connector = to_intel_connector(connector);
13408 intel_connector->unregister(intel_connector);
13411 drm_mode_config_cleanup(dev);
13413 intel_cleanup_overlay(dev);
13415 mutex_lock(&dev->struct_mutex);
13416 intel_cleanup_gt_powersave(dev);
13417 mutex_unlock(&dev->struct_mutex);
13421 * Return which encoder is currently attached for connector.
13423 struct drm_encoder *intel_best_encoder(struct drm_connector *connector)
13425 return &intel_attached_encoder(connector)->base;
13428 void intel_connector_attach_encoder(struct intel_connector *connector,
13429 struct intel_encoder *encoder)
13431 connector->encoder = encoder;
13432 drm_mode_connector_attach_encoder(&connector->base,
13437 * set vga decode state - true == enable VGA decode
13439 int intel_modeset_vga_set_state(struct drm_device *dev, bool state)
13441 struct drm_i915_private *dev_priv = dev->dev_private;
13442 unsigned reg = INTEL_INFO(dev)->gen >= 6 ? SNB_GMCH_CTRL : INTEL_GMCH_CTRL;
13445 if (pci_read_config_word(dev_priv->bridge_dev, reg, &gmch_ctrl)) {
13446 DRM_ERROR("failed to read control word\n");
13450 if (!!(gmch_ctrl & INTEL_GMCH_VGA_DISABLE) == !state)
13454 gmch_ctrl &= ~INTEL_GMCH_VGA_DISABLE;
13456 gmch_ctrl |= INTEL_GMCH_VGA_DISABLE;
13458 if (pci_write_config_word(dev_priv->bridge_dev, reg, gmch_ctrl)) {
13459 DRM_ERROR("failed to write control word\n");
13466 struct intel_display_error_state {
13468 u32 power_well_driver;
13470 int num_transcoders;
13472 struct intel_cursor_error_state {
13477 } cursor[I915_MAX_PIPES];
13479 struct intel_pipe_error_state {
13480 bool power_domain_on;
13483 } pipe[I915_MAX_PIPES];
13485 struct intel_plane_error_state {
13493 } plane[I915_MAX_PIPES];
13495 struct intel_transcoder_error_state {
13496 bool power_domain_on;
13497 enum transcoder cpu_transcoder;
13510 struct intel_display_error_state *
13511 intel_display_capture_error_state(struct drm_device *dev)
13513 struct drm_i915_private *dev_priv = dev->dev_private;
13514 struct intel_display_error_state *error;
13515 int transcoders[] = {
13523 if (INTEL_INFO(dev)->num_pipes == 0)
13526 error = kzalloc(sizeof(*error), GFP_ATOMIC);
13530 if (IS_HASWELL(dev) || IS_BROADWELL(dev))
13531 error->power_well_driver = I915_READ(HSW_PWR_WELL_DRIVER);
13533 for_each_pipe(dev_priv, i) {
13534 error->pipe[i].power_domain_on =
13535 __intel_display_power_is_enabled(dev_priv,
13536 POWER_DOMAIN_PIPE(i));
13537 if (!error->pipe[i].power_domain_on)
13540 error->cursor[i].control = I915_READ(CURCNTR(i));
13541 error->cursor[i].position = I915_READ(CURPOS(i));
13542 error->cursor[i].base = I915_READ(CURBASE(i));
13544 error->plane[i].control = I915_READ(DSPCNTR(i));
13545 error->plane[i].stride = I915_READ(DSPSTRIDE(i));
13546 if (INTEL_INFO(dev)->gen <= 3) {
13547 error->plane[i].size = I915_READ(DSPSIZE(i));
13548 error->plane[i].pos = I915_READ(DSPPOS(i));
13550 if (INTEL_INFO(dev)->gen <= 7 && !IS_HASWELL(dev))
13551 error->plane[i].addr = I915_READ(DSPADDR(i));
13552 if (INTEL_INFO(dev)->gen >= 4) {
13553 error->plane[i].surface = I915_READ(DSPSURF(i));
13554 error->plane[i].tile_offset = I915_READ(DSPTILEOFF(i));
13557 error->pipe[i].source = I915_READ(PIPESRC(i));
13559 if (HAS_GMCH_DISPLAY(dev))
13560 error->pipe[i].stat = I915_READ(PIPESTAT(i));
13563 error->num_transcoders = INTEL_INFO(dev)->num_pipes;
13564 if (HAS_DDI(dev_priv->dev))
13565 error->num_transcoders++; /* Account for eDP. */
13567 for (i = 0; i < error->num_transcoders; i++) {
13568 enum transcoder cpu_transcoder = transcoders[i];
13570 error->transcoder[i].power_domain_on =
13571 __intel_display_power_is_enabled(dev_priv,
13572 POWER_DOMAIN_TRANSCODER(cpu_transcoder));
13573 if (!error->transcoder[i].power_domain_on)
13576 error->transcoder[i].cpu_transcoder = cpu_transcoder;
13578 error->transcoder[i].conf = I915_READ(PIPECONF(cpu_transcoder));
13579 error->transcoder[i].htotal = I915_READ(HTOTAL(cpu_transcoder));
13580 error->transcoder[i].hblank = I915_READ(HBLANK(cpu_transcoder));
13581 error->transcoder[i].hsync = I915_READ(HSYNC(cpu_transcoder));
13582 error->transcoder[i].vtotal = I915_READ(VTOTAL(cpu_transcoder));
13583 error->transcoder[i].vblank = I915_READ(VBLANK(cpu_transcoder));
13584 error->transcoder[i].vsync = I915_READ(VSYNC(cpu_transcoder));
13590 #define err_printf(e, ...) i915_error_printf(e, __VA_ARGS__)
13593 intel_display_print_error_state(struct drm_i915_error_state_buf *m,
13594 struct drm_device *dev,
13595 struct intel_display_error_state *error)
13597 struct drm_i915_private *dev_priv = dev->dev_private;
13603 err_printf(m, "Num Pipes: %d\n", INTEL_INFO(dev)->num_pipes);
13604 if (IS_HASWELL(dev) || IS_BROADWELL(dev))
13605 err_printf(m, "PWR_WELL_CTL2: %08x\n",
13606 error->power_well_driver);
13607 for_each_pipe(dev_priv, i) {
13608 err_printf(m, "Pipe [%d]:\n", i);
13609 err_printf(m, " Power: %s\n",
13610 error->pipe[i].power_domain_on ? "on" : "off");
13611 err_printf(m, " SRC: %08x\n", error->pipe[i].source);
13612 err_printf(m, " STAT: %08x\n", error->pipe[i].stat);
13614 err_printf(m, "Plane [%d]:\n", i);
13615 err_printf(m, " CNTR: %08x\n", error->plane[i].control);
13616 err_printf(m, " STRIDE: %08x\n", error->plane[i].stride);
13617 if (INTEL_INFO(dev)->gen <= 3) {
13618 err_printf(m, " SIZE: %08x\n", error->plane[i].size);
13619 err_printf(m, " POS: %08x\n", error->plane[i].pos);
13621 if (INTEL_INFO(dev)->gen <= 7 && !IS_HASWELL(dev))
13622 err_printf(m, " ADDR: %08x\n", error->plane[i].addr);
13623 if (INTEL_INFO(dev)->gen >= 4) {
13624 err_printf(m, " SURF: %08x\n", error->plane[i].surface);
13625 err_printf(m, " TILEOFF: %08x\n", error->plane[i].tile_offset);
13628 err_printf(m, "Cursor [%d]:\n", i);
13629 err_printf(m, " CNTR: %08x\n", error->cursor[i].control);
13630 err_printf(m, " POS: %08x\n", error->cursor[i].position);
13631 err_printf(m, " BASE: %08x\n", error->cursor[i].base);
13634 for (i = 0; i < error->num_transcoders; i++) {
13635 err_printf(m, "CPU transcoder: %c\n",
13636 transcoder_name(error->transcoder[i].cpu_transcoder));
13637 err_printf(m, " Power: %s\n",
13638 error->transcoder[i].power_domain_on ? "on" : "off");
13639 err_printf(m, " CONF: %08x\n", error->transcoder[i].conf);
13640 err_printf(m, " HTOTAL: %08x\n", error->transcoder[i].htotal);
13641 err_printf(m, " HBLANK: %08x\n", error->transcoder[i].hblank);
13642 err_printf(m, " HSYNC: %08x\n", error->transcoder[i].hsync);
13643 err_printf(m, " VTOTAL: %08x\n", error->transcoder[i].vtotal);
13644 err_printf(m, " VBLANK: %08x\n", error->transcoder[i].vblank);
13645 err_printf(m, " VSYNC: %08x\n", error->transcoder[i].vsync);
13649 void intel_modeset_preclose(struct drm_device *dev, struct drm_file *file)
13651 struct intel_crtc *crtc;
13653 for_each_intel_crtc(dev, crtc) {
13654 struct intel_unpin_work *work;
13656 spin_lock_irq(&dev->event_lock);
13658 work = crtc->unpin_work;
13660 if (work && work->event &&
13661 work->event->base.file_priv == file) {
13662 kfree(work->event);
13663 work->event = NULL;
13666 spin_unlock_irq(&dev->event_lock);