drivers/hwmon/thmc50.c

   1 /*
   2  * thmc50.c - Part of lm_sensors, Linux kernel modules for hardware
   3  *            monitoring
   4  * Copyright (C) 2007 Krzysztof Helt <krzysztof.h1@wp.pl>
   5  * Based on 2.4 driver by Frodo Looijaard <frodol@dds.nl> and
   6  * Philip Edelbrock <phil@netroedge.com>
   7  *
   8  * This program is free software; you can redistribute it and/or modify
   9  * it under the terms of the GNU General Public License as published by
  10  * the Free Software Foundation; either version 2 of the License, or
  11  * (at your option) any later version.
  12  *
  13  * This program is distributed in the hope that it will be useful,
  14  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  16  * GNU General Public License for more details.
  17  *
  18  * You should have received a copy of the GNU General Public License
  19  * along with this program; if not, write to the Free Software
  20  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  21  */
  22
  23 #include <linux/module.h>
  24 #include <linux/init.h>
  25 #include <linux/slab.h>
  26 #include <linux/i2c.h>
  27 #include <linux/hwmon.h>
  28 #include <linux/hwmon-sysfs.h>
  29 #include <linux/err.h>
  30 #include <linux/mutex.h>
  31 #include <linux/jiffies.h>
  32
  33 MODULE_LICENSE("GPL");
  34
  35 /* Addresses to scan */
  36 static const unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END };
  37
  38 /* Insmod parameters */
  39 enum chips { thmc50, adm1022 };
  40
  41 static unsigned short adm1022_temp3[16];
  42 static unsigned int adm1022_temp3_num;
  43 module_param_array(adm1022_temp3, ushort, &adm1022_temp3_num, 0);
  44 MODULE_PARM_DESC(adm1022_temp3,
  45                  "List of adapter,address pairs to enable 3rd temperature (ADM1022 only)");
  46
  47 /* Many THMC50 constants specified below */
  48
  49 /* The THMC50 registers */
  50 #define THMC50_REG_CONF                         0x40
  51 #define THMC50_REG_COMPANY_ID                   0x3E
  52 #define THMC50_REG_DIE_CODE                     0x3F
  53 #define THMC50_REG_ANALOG_OUT                   0x19
  54 /*
  55  * The mirror status register cannot be used as
  56  * reading it does not clear alarms.
  57  */
  58 #define THMC50_REG_INTR                         0x41
  59
  60 static const u8 THMC50_REG_TEMP[] = { 0x27, 0x26, 0x20 };
  61 static const u8 THMC50_REG_TEMP_MIN[] = { 0x3A, 0x38, 0x2C };
  62 static const u8 THMC50_REG_TEMP_MAX[] = { 0x39, 0x37, 0x2B };
  63 static const u8 THMC50_REG_TEMP_CRITICAL[] = { 0x13, 0x14, 0x14 };
  64 static const u8 THMC50_REG_TEMP_DEFAULT[] = { 0x17, 0x18, 0x18 };
  65
  66 #define THMC50_REG_CONF_nFANOFF                 0x20
  67 #define THMC50_REG_CONF_PROGRAMMED              0x08
  68
  69 /* Each client has this additional data */
  70 struct thmc50_data {
  71         struct i2c_client *client;
  72         const struct attribute_group *groups[3];
  73
  74         struct mutex update_lock;
  75         enum chips type;
  76         unsigned long last_updated;     /* In jiffies */
  77         char has_temp3;         /* !=0 if it is ADM1022 in temp3 mode */
  78         char valid;             /* !=0 if following fields are valid */
  79
  80         /* Register values */
  81         s8 temp_input[3];
  82         s8 temp_max[3];
  83         s8 temp_min[3];
  84         s8 temp_critical[3];
  85         u8 analog_out;
  86         u8 alarms;
  87 };
  88
  89 static struct thmc50_data *thmc50_update_device(struct device *dev)
  90 {
  91         struct thmc50_data *data = dev_get_drvdata(dev);
  92         struct i2c_client *client = data->client;
  93         int timeout = HZ / 5 + (data->type == thmc50 ? HZ : 0);
  94
  95         mutex_lock(&data->update_lock);
  96
  97         if (time_after(jiffies, data->last_updated + timeout)
  98             || !data->valid) {
  99
 100                 int temps = data->has_temp3 ? 3 : 2;
 101                 int i;
 102                 int prog = i2c_smbus_read_byte_data(client, THMC50_REG_CONF);
 103
 104                 prog &= THMC50_REG_CONF_PROGRAMMED;
 105
 106                 for (i = 0; i < temps; i++) {
 107                         data->temp_input[i] = i2c_smbus_read_byte_data(client,
 108                                                 THMC50_REG_TEMP[i]);
 109                         data->temp_max[i] = i2c_smbus_read_byte_data(client,
 110                                                 THMC50_REG_TEMP_MAX[i]);
 111                         data->temp_min[i] = i2c_smbus_read_byte_data(client,
 112                                                 THMC50_REG_TEMP_MIN[i]);
 113                         data->temp_critical[i] =
 114                                 i2c_smbus_read_byte_data(client,
 115                                         prog ? THMC50_REG_TEMP_CRITICAL[i]
 116                                              : THMC50_REG_TEMP_DEFAULT[i]);
 117                 }
 118                 data->analog_out =
 119                     i2c_smbus_read_byte_data(client, THMC50_REG_ANALOG_OUT);
 120                 data->alarms =
 121                     i2c_smbus_read_byte_data(client, THMC50_REG_INTR);
 122                 data->last_updated = jiffies;
 123                 data->valid = 1;
 124         }
 125
 126         mutex_unlock(&data->update_lock);
 127
 128         return data;
 129 }
 130
 131 static ssize_t show_analog_out(struct device *dev,
 132                                struct device_attribute *attr, char *buf)
 133 {
 134         struct thmc50_data *data = thmc50_update_device(dev);
 135         return sprintf(buf, "%d\n", data->analog_out);
 136 }
 137
 138 static ssize_t set_analog_out(struct device *dev,
 139                               struct device_attribute *attr,
 140                               const char *buf, size_t count)
 141 {
 142         struct thmc50_data *data = dev_get_drvdata(dev);
 143         struct i2c_client *client = data->client;
 144         int config;
 145         unsigned long tmp;
 146         int err;
 147
 148         err = kstrtoul(buf, 10, &tmp);
 149         if (err)
 150                 return err;
 151
 152         mutex_lock(&data->update_lock);
 153         data->analog_out = clamp_val(tmp, 0, 255);
 154         i2c_smbus_write_byte_data(client, THMC50_REG_ANALOG_OUT,
 155                                   data->analog_out);
 156
 157         config = i2c_smbus_read_byte_data(client, THMC50_REG_CONF);
 158         if (data->analog_out == 0)
 159                 config &= ~THMC50_REG_CONF_nFANOFF;
 160         else
 161                 config |= THMC50_REG_CONF_nFANOFF;
 162         i2c_smbus_write_byte_data(client, THMC50_REG_CONF, config);
 163
 164         mutex_unlock(&data->update_lock);
 165         return count;
 166 }
 167
 168 /* There is only one PWM mode = DC */
 169 static ssize_t show_pwm_mode(struct device *dev, struct device_attribute *attr,
 170                              char *buf)
 171 {
 172         return sprintf(buf, "0\n");
 173 }
 174
 175 /* Temperatures */
 176 static ssize_t show_temp(struct device *dev, struct device_attribute *attr,
 177                          char *buf)
 178 {
 179         int nr = to_sensor_dev_attr(attr)->index;
 180         struct thmc50_data *data = thmc50_update_device(dev);
 181         return sprintf(buf, "%d\n", data->temp_input[nr] * 1000);
 182 }
 183
 184 static ssize_t show_temp_min(struct device *dev, struct device_attribute *attr,
 185                              char *buf)
 186 {
 187         int nr = to_sensor_dev_attr(attr)->index;
 188         struct thmc50_data *data = thmc50_update_device(dev);
 189         return sprintf(buf, "%d\n", data->temp_min[nr] * 1000);
 190 }
 191
 192 static ssize_t set_temp_min(struct device *dev, struct device_attribute *attr,
 193                             const char *buf, size_t count)
 194 {
 195         int nr = to_sensor_dev_attr(attr)->index;
 196         struct thmc50_data *data = dev_get_drvdata(dev);
 197         struct i2c_client *client = data->client;
 198         long val;
 199         int err;
 200
 201         err = kstrtol(buf, 10, &val);
 202         if (err)
 203                 return err;
 204
 205         mutex_lock(&data->update_lock);
 206         data->temp_min[nr] = clamp_val(val / 1000, -128, 127);
 207         i2c_smbus_write_byte_data(client, THMC50_REG_TEMP_MIN[nr],
 208                                   data->temp_min[nr]);
 209         mutex_unlock(&data->update_lock);
 210         return count;
 211 }
 212
 213 static ssize_t show_temp_max(struct device *dev, struct device_attribute *attr,
 214                              char *buf)
 215 {
 216         int nr = to_sensor_dev_attr(attr)->index;
 217         struct thmc50_data *data = thmc50_update_device(dev);
 218         return sprintf(buf, "%d\n", data->temp_max[nr] * 1000);
 219 }
 220
 221 static ssize_t set_temp_max(struct device *dev, struct device_attribute *attr,
 222                             const char *buf, size_t count)
 223 {
 224         int nr = to_sensor_dev_attr(attr)->index;
 225         struct thmc50_data *data = dev_get_drvdata(dev);
 226         struct i2c_client *client = data->client;
 227         long val;
 228         int err;
 229
 230         err = kstrtol(buf, 10, &val);
 231         if (err)
 232                 return err;
 233
 234         mutex_lock(&data->update_lock);
 235         data->temp_max[nr] = clamp_val(val / 1000, -128, 127);
 236         i2c_smbus_write_byte_data(client, THMC50_REG_TEMP_MAX[nr],
 237                                   data->temp_max[nr]);
 238         mutex_unlock(&data->update_lock);
 239         return count;
 240 }
 241
 242 static ssize_t show_temp_critical(struct device *dev,
 243                                   struct device_attribute *attr,
 244                                   char *buf)
 245 {
 246         int nr = to_sensor_dev_attr(attr)->index;
 247         struct thmc50_data *data = thmc50_update_device(dev);
 248         return sprintf(buf, "%d\n", data->temp_critical[nr] * 1000);
 249 }
 250
 251 static ssize_t show_alarm(struct device *dev, struct device_attribute *attr,
 252                           char *buf)
 253 {
 254         int index = to_sensor_dev_attr(attr)->index;
 255         struct thmc50_data *data = thmc50_update_device(dev);
 256
 257         return sprintf(buf, "%u\n", (data->alarms >> index) & 1);
 258 }
 259
 260 #define temp_reg(offset)                                                \
 261 static SENSOR_DEVICE_ATTR(temp##offset##_input, S_IRUGO, show_temp,     \
 262                         NULL, offset - 1);                              \
 263 static SENSOR_DEVICE_ATTR(temp##offset##_min, S_IRUGO | S_IWUSR,        \
 264                         show_temp_min, set_temp_min, offset - 1);       \
 265 static SENSOR_DEVICE_ATTR(temp##offset##_max, S_IRUGO | S_IWUSR,        \
 266                         show_temp_max, set_temp_max, offset - 1);       \
 267 static SENSOR_DEVICE_ATTR(temp##offset##_crit, S_IRUGO,                 \
 268                         show_temp_critical, NULL, offset - 1);
 269
 270 temp_reg(1);
 271 temp_reg(2);
 272 temp_reg(3);
 273
 274 static SENSOR_DEVICE_ATTR(temp1_alarm, S_IRUGO, show_alarm, NULL, 0);
 275 static SENSOR_DEVICE_ATTR(temp2_alarm, S_IRUGO, show_alarm, NULL, 5);
 276 static SENSOR_DEVICE_ATTR(temp3_alarm, S_IRUGO, show_alarm, NULL, 1);
 277 static SENSOR_DEVICE_ATTR(temp2_fault, S_IRUGO, show_alarm, NULL, 7);
 278 static SENSOR_DEVICE_ATTR(temp3_fault, S_IRUGO, show_alarm, NULL, 2);
 279
 280 static SENSOR_DEVICE_ATTR(pwm1, S_IRUGO | S_IWUSR, show_analog_out,
 281                           set_analog_out, 0);
 282 static SENSOR_DEVICE_ATTR(pwm1_mode, S_IRUGO, show_pwm_mode, NULL, 0);
 283
 284 static struct attribute *thmc50_attributes[] = {
 285         &sensor_dev_attr_temp1_max.dev_attr.attr,
 286         &sensor_dev_attr_temp1_min.dev_attr.attr,
 287         &sensor_dev_attr_temp1_input.dev_attr.attr,
 288         &sensor_dev_attr_temp1_crit.dev_attr.attr,
 289         &sensor_dev_attr_temp1_alarm.dev_attr.attr,
 290         &sensor_dev_attr_temp2_max.dev_attr.attr,
 291         &sensor_dev_attr_temp2_min.dev_attr.attr,
 292         &sensor_dev_attr_temp2_input.dev_attr.attr,
 293         &sensor_dev_attr_temp2_crit.dev_attr.attr,
 294         &sensor_dev_attr_temp2_alarm.dev_attr.attr,
 295         &sensor_dev_attr_temp2_fault.dev_attr.attr,
 296         &sensor_dev_attr_pwm1.dev_attr.attr,
 297         &sensor_dev_attr_pwm1_mode.dev_attr.attr,
 298         NULL
 299 };
 300
 301 static const struct attribute_group thmc50_group = {
 302         .attrs = thmc50_attributes,
 303 };
 304
 305 /* for ADM1022 3rd temperature mode */
 306 static struct attribute *temp3_attributes[] = {
 307         &sensor_dev_attr_temp3_max.dev_attr.attr,
 308         &sensor_dev_attr_temp3_min.dev_attr.attr,
 309         &sensor_dev_attr_temp3_input.dev_attr.attr,
 310         &sensor_dev_attr_temp3_crit.dev_attr.attr,
 311         &sensor_dev_attr_temp3_alarm.dev_attr.attr,
 312         &sensor_dev_attr_temp3_fault.dev_attr.attr,
 313         NULL
 314 };
 315
 316 static const struct attribute_group temp3_group = {
 317         .attrs = temp3_attributes,
 318 };
 319
 320 /* Return 0 if detection is successful, -ENODEV otherwise */
 321 static int thmc50_detect(struct i2c_client *client,
 322                          struct i2c_board_info *info)
 323 {
 324         unsigned company;
 325         unsigned revision;
 326         unsigned config;
 327         struct i2c_adapter *adapter = client->adapter;
 328         const char *type_name;
 329
 330         if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
 331                 pr_debug("thmc50: detect failed, smbus byte data not supported!\n");
 332                 return -ENODEV;
 333         }
 334
 335         pr_debug("thmc50: Probing for THMC50 at 0x%2X on bus %d\n",
 336                  client->addr, i2c_adapter_id(client->adapter));
 337
 338         company = i2c_smbus_read_byte_data(client, THMC50_REG_COMPANY_ID);
 339         revision = i2c_smbus_read_byte_data(client, THMC50_REG_DIE_CODE);
 340         config = i2c_smbus_read_byte_data(client, THMC50_REG_CONF);
 341         if (revision < 0xc0 || (config & 0x10))
 342                 return -ENODEV;
 343
 344         if (company == 0x41) {
 345                 int id = i2c_adapter_id(client->adapter);
 346                 int i;
 347
 348                 type_name = "adm1022";
 349                 for (i = 0; i + 1 < adm1022_temp3_num; i += 2)
 350                         if (adm1022_temp3[i] == id &&
 351                             adm1022_temp3[i + 1] == client->addr) {
 352                                 /* enable 2nd remote temp */
 353                                 config |= (1 << 7);
 354                                 i2c_smbus_write_byte_data(client,
 355                                                           THMC50_REG_CONF,
 356                                                           config);
 357                                 break;
 358                         }
 359         } else if (company == 0x49) {
 360                 type_name = "thmc50";
 361         } else {
 362                 pr_debug("thmc50: Detection of THMC50/ADM1022 failed\n");
 363                 return -ENODEV;
 364         }
 365
 366         pr_debug("thmc50: Detected %s (version %x, revision %x)\n",
 367                  type_name, (revision >> 4) - 0xc, revision & 0xf);
 368
 369         strlcpy(info->type, type_name, I2C_NAME_SIZE);
 370
 371         return 0;
 372 }
 373
 374 static void thmc50_init_client(struct thmc50_data *data)
 375 {
 376         struct i2c_client *client = data->client;
 377         int config;
 378
 379         data->analog_out = i2c_smbus_read_byte_data(client,
 380                                                     THMC50_REG_ANALOG_OUT);
 381         /* set up to at least 1 */
 382         if (data->analog_out == 0) {
 383                 data->analog_out = 1;
 384                 i2c_smbus_write_byte_data(client, THMC50_REG_ANALOG_OUT,
 385                                           data->analog_out);
 386         }
 387         config = i2c_smbus_read_byte_data(client, THMC50_REG_CONF);
 388         config |= 0x1;  /* start the chip if it is in standby mode */
 389         if (data->type == adm1022 && (config & (1 << 7)))
 390                 data->has_temp3 = 1;
 391         i2c_smbus_write_byte_data(client, THMC50_REG_CONF, config);
 392 }
 393
 394 static int thmc50_probe(struct i2c_client *client,
 395                         const struct i2c_device_id *id)
 396 {
 397         struct device *dev = &client->dev;
 398         struct thmc50_data *data;
 399         struct device *hwmon_dev;
 400         int idx = 0;
 401
 402         data = devm_kzalloc(dev, sizeof(struct thmc50_data), GFP_KERNEL);
 403         if (!data)
 404                 return -ENOMEM;
 405
 406         data->client = client;
 407         data->type = id->driver_data;
 408         mutex_init(&data->update_lock);
 409
 410         thmc50_init_client(data);
 411
 412         /* sysfs hooks */
 413         data->groups[idx++] = &thmc50_group;
 414
 415         /* Register additional ADM1022 sysfs hooks */
 416         if (data->has_temp3)
 417                 data->groups[idx++] = &temp3_group;
 418
 419         hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name,
 420                                                            data, data->groups);
 421         return PTR_ERR_OR_ZERO(hwmon_dev);
 422 }
 423
 424 static const struct i2c_device_id thmc50_id[] = {
 425         { "adm1022", adm1022 },
 426         { "thmc50", thmc50 },
 427         { }
 428 };
 429 MODULE_DEVICE_TABLE(i2c, thmc50_id);
 430
 431 static struct i2c_driver thmc50_driver = {
 432         .class = I2C_CLASS_HWMON,
 433         .driver = {
 434                 .name = "thmc50",
 435         },
 436         .probe = thmc50_probe,
 437         .id_table = thmc50_id,
 438         .detect = thmc50_detect,
 439         .address_list = normal_i2c,
 440 };
 441
 442 module_i2c_driver(thmc50_driver);
 443
 444 MODULE_AUTHOR("Krzysztof Helt <krzysztof.h1@wp.pl>");
 445 MODULE_DESCRIPTION("THMC50 driver");