2 * Copyright (c) 1996-2004 Russell King.
4 * Please note that this platform does not support 32-bit IDE IO.
7 #include <linux/string.h>
8 #include <linux/module.h>
9 #include <linux/ioport.h>
10 #include <linux/slab.h>
11 #include <linux/blkdev.h>
12 #include <linux/errno.h>
13 #include <linux/ide.h>
14 #include <linux/dma-mapping.h>
15 #include <linux/device.h>
16 #include <linux/init.h>
17 #include <linux/scatterlist.h>
21 #include <asm/ecard.h>
23 #define DRV_NAME "icside"
25 #define ICS_IDENT_OFFSET 0x2280
27 #define ICS_ARCIN_V5_INTRSTAT 0x0000
28 #define ICS_ARCIN_V5_INTROFFSET 0x0004
29 #define ICS_ARCIN_V5_IDEOFFSET 0x2800
30 #define ICS_ARCIN_V5_IDEALTOFFSET 0x2b80
31 #define ICS_ARCIN_V5_IDESTEPPING 6
33 #define ICS_ARCIN_V6_IDEOFFSET_1 0x2000
34 #define ICS_ARCIN_V6_INTROFFSET_1 0x2200
35 #define ICS_ARCIN_V6_INTRSTAT_1 0x2290
36 #define ICS_ARCIN_V6_IDEALTOFFSET_1 0x2380
37 #define ICS_ARCIN_V6_IDEOFFSET_2 0x3000
38 #define ICS_ARCIN_V6_INTROFFSET_2 0x3200
39 #define ICS_ARCIN_V6_INTRSTAT_2 0x3290
40 #define ICS_ARCIN_V6_IDEALTOFFSET_2 0x3380
41 #define ICS_ARCIN_V6_IDESTEPPING 6
44 unsigned int dataoffset;
45 unsigned int ctrloffset;
46 unsigned int stepping;
49 static struct cardinfo icside_cardinfo_v5 = {
50 .dataoffset = ICS_ARCIN_V5_IDEOFFSET,
51 .ctrloffset = ICS_ARCIN_V5_IDEALTOFFSET,
52 .stepping = ICS_ARCIN_V5_IDESTEPPING,
55 static struct cardinfo icside_cardinfo_v6_1 = {
56 .dataoffset = ICS_ARCIN_V6_IDEOFFSET_1,
57 .ctrloffset = ICS_ARCIN_V6_IDEALTOFFSET_1,
58 .stepping = ICS_ARCIN_V6_IDESTEPPING,
61 static struct cardinfo icside_cardinfo_v6_2 = {
62 .dataoffset = ICS_ARCIN_V6_IDEOFFSET_2,
63 .ctrloffset = ICS_ARCIN_V6_IDEALTOFFSET_2,
64 .stepping = ICS_ARCIN_V6_IDESTEPPING,
70 void __iomem *irq_port;
71 void __iomem *ioc_base;
74 struct ide_host *host;
77 #define ICS_TYPE_A3IN 0
78 #define ICS_TYPE_A3USER 1
80 #define ICS_TYPE_V5 15
81 #define ICS_TYPE_NOTYPE ((unsigned int)-1)
83 /* ---------------- Version 5 PCB Support Functions --------------------- */
84 /* Prototype: icside_irqenable_arcin_v5 (struct expansion_card *ec, int irqnr)
85 * Purpose : enable interrupts from card
87 static void icside_irqenable_arcin_v5 (struct expansion_card *ec, int irqnr)
89 struct icside_state *state = ec->irq_data;
91 writeb(0, state->irq_port + ICS_ARCIN_V5_INTROFFSET);
94 /* Prototype: icside_irqdisable_arcin_v5 (struct expansion_card *ec, int irqnr)
95 * Purpose : disable interrupts from card
97 static void icside_irqdisable_arcin_v5 (struct expansion_card *ec, int irqnr)
99 struct icside_state *state = ec->irq_data;
101 readb(state->irq_port + ICS_ARCIN_V5_INTROFFSET);
104 static const expansioncard_ops_t icside_ops_arcin_v5 = {
105 .irqenable = icside_irqenable_arcin_v5,
106 .irqdisable = icside_irqdisable_arcin_v5,
110 /* ---------------- Version 6 PCB Support Functions --------------------- */
111 /* Prototype: icside_irqenable_arcin_v6 (struct expansion_card *ec, int irqnr)
112 * Purpose : enable interrupts from card
114 static void icside_irqenable_arcin_v6 (struct expansion_card *ec, int irqnr)
116 struct icside_state *state = ec->irq_data;
117 void __iomem *base = state->irq_port;
121 switch (state->channel) {
123 writeb(0, base + ICS_ARCIN_V6_INTROFFSET_1);
124 readb(base + ICS_ARCIN_V6_INTROFFSET_2);
127 writeb(0, base + ICS_ARCIN_V6_INTROFFSET_2);
128 readb(base + ICS_ARCIN_V6_INTROFFSET_1);
133 /* Prototype: icside_irqdisable_arcin_v6 (struct expansion_card *ec, int irqnr)
134 * Purpose : disable interrupts from card
136 static void icside_irqdisable_arcin_v6 (struct expansion_card *ec, int irqnr)
138 struct icside_state *state = ec->irq_data;
142 readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_1);
143 readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_2);
146 /* Prototype: icside_irqprobe(struct expansion_card *ec)
147 * Purpose : detect an active interrupt from card
149 static int icside_irqpending_arcin_v6(struct expansion_card *ec)
151 struct icside_state *state = ec->irq_data;
153 return readb(state->irq_port + ICS_ARCIN_V6_INTRSTAT_1) & 1 ||
154 readb(state->irq_port + ICS_ARCIN_V6_INTRSTAT_2) & 1;
157 static const expansioncard_ops_t icside_ops_arcin_v6 = {
158 .irqenable = icside_irqenable_arcin_v6,
159 .irqdisable = icside_irqdisable_arcin_v6,
160 .irqpending = icside_irqpending_arcin_v6,
164 * Handle routing of interrupts. This is called before
165 * we write the command to the drive.
167 static void icside_maskproc(ide_drive_t *drive, int mask)
169 ide_hwif_t *hwif = drive->hwif;
170 struct expansion_card *ec = ECARD_DEV(hwif->dev);
171 struct icside_state *state = ecard_get_drvdata(ec);
174 local_irq_save(flags);
176 state->channel = hwif->channel;
178 if (state->enabled && !mask) {
179 switch (hwif->channel) {
181 writeb(0, state->irq_port + ICS_ARCIN_V6_INTROFFSET_1);
182 readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_2);
185 writeb(0, state->irq_port + ICS_ARCIN_V6_INTROFFSET_2);
186 readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_1);
190 readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_2);
191 readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_1);
194 local_irq_restore(flags);
197 static const struct ide_port_ops icside_v6_no_dma_port_ops = {
198 .maskproc = icside_maskproc,
201 #ifdef CONFIG_BLK_DEV_IDEDMA_ICS
205 * Similar to the BM-DMA, but we use the RiscPCs IOMD DMA controllers.
206 * There is only one DMA controller per card, which means that only
207 * one drive can be accessed at one time. NOTE! We do not enforce that
208 * here, but we rely on the main IDE driver spotting that both
209 * interfaces use the same IRQ, which should guarantee this.
213 * Configure the IOMD to give the appropriate timings for the transfer
214 * mode being requested. We take the advice of the ATA standards, and
215 * calculate the cycle time based on the transfer mode, and the EIDE
216 * MW DMA specs that the drive provides in the IDENTIFY command.
218 * We have the following IOMD DMA modes to choose from:
220 * Type Active Recovery Cycle
221 * A 250 (250) 312 (550) 562 (800)
223 * C 125 (125) 125 (375) 250 (500)
226 * (figures in brackets are actual measured timings)
228 * However, we also need to take care of the read/write active and
232 * Mode Active -- Recovery -- Cycle IOMD type
233 * MW0 215 50 215 480 A
237 static void icside_set_dma_mode(ide_drive_t *drive, const u8 xfer_mode)
239 unsigned long cycle_time;
240 int use_dma_info = 0;
265 * If we're going to be doing MW_DMA_1 or MW_DMA_2, we should
266 * take care to note the values in the ID...
268 if (use_dma_info && drive->id[ATA_ID_EIDE_DMA_TIME] > cycle_time)
269 cycle_time = drive->id[ATA_ID_EIDE_DMA_TIME];
271 ide_set_drivedata(drive, (void *)cycle_time);
273 printk("%s: %s selected (peak %dMB/s)\n", drive->name,
274 ide_xfer_verbose(xfer_mode),
275 2000 / (unsigned long)ide_get_drivedata(drive));
278 static const struct ide_port_ops icside_v6_port_ops = {
279 .set_dma_mode = icside_set_dma_mode,
280 .maskproc = icside_maskproc,
283 static void icside_dma_host_set(ide_drive_t *drive, int on)
287 static int icside_dma_end(ide_drive_t *drive)
289 ide_hwif_t *hwif = drive->hwif;
290 struct expansion_card *ec = ECARD_DEV(hwif->dev);
292 disable_dma(ec->dma);
294 return get_dma_residue(ec->dma) != 0;
297 static void icside_dma_start(ide_drive_t *drive)
299 ide_hwif_t *hwif = drive->hwif;
300 struct expansion_card *ec = ECARD_DEV(hwif->dev);
302 /* We can not enable DMA on both channels simultaneously. */
303 BUG_ON(dma_channel_active(ec->dma));
307 static int icside_dma_setup(ide_drive_t *drive, struct ide_cmd *cmd)
309 ide_hwif_t *hwif = drive->hwif;
310 struct expansion_card *ec = ECARD_DEV(hwif->dev);
311 struct icside_state *state = ecard_get_drvdata(ec);
312 unsigned int dma_mode;
314 if (cmd->tf_flags & IDE_TFLAG_WRITE)
315 dma_mode = DMA_MODE_WRITE;
317 dma_mode = DMA_MODE_READ;
320 * We can not enable DMA on both channels.
322 BUG_ON(dma_channel_active(ec->dma));
325 * Ensure that we have the right interrupt routed.
327 icside_maskproc(drive, 0);
330 * Route the DMA signals to the correct interface.
332 writeb(state->sel | hwif->channel, state->ioc_base);
335 * Select the correct timing for this drive.
337 set_dma_speed(ec->dma, (unsigned long)ide_get_drivedata(drive));
340 * Tell the DMA engine about the SG table and
343 set_dma_sg(ec->dma, hwif->sg_table, cmd->sg_nents);
344 set_dma_mode(ec->dma, dma_mode);
349 static int icside_dma_test_irq(ide_drive_t *drive)
351 ide_hwif_t *hwif = drive->hwif;
352 struct expansion_card *ec = ECARD_DEV(hwif->dev);
353 struct icside_state *state = ecard_get_drvdata(ec);
355 return readb(state->irq_port +
357 ICS_ARCIN_V6_INTRSTAT_2 :
358 ICS_ARCIN_V6_INTRSTAT_1)) & 1;
361 static int icside_dma_init(ide_hwif_t *hwif, const struct ide_port_info *d)
363 hwif->dmatable_cpu = NULL;
364 hwif->dmatable_dma = 0;
369 static const struct ide_dma_ops icside_v6_dma_ops = {
370 .dma_host_set = icside_dma_host_set,
371 .dma_setup = icside_dma_setup,
372 .dma_start = icside_dma_start,
373 .dma_end = icside_dma_end,
374 .dma_test_irq = icside_dma_test_irq,
375 .dma_lost_irq = ide_dma_lost_irq,
378 #define icside_v6_dma_ops NULL
381 static int icside_dma_off_init(ide_hwif_t *hwif, const struct ide_port_info *d)
386 static void icside_setup_ports(struct ide_hw *hw, void __iomem *base,
387 struct cardinfo *info, struct expansion_card *ec)
389 unsigned long port = (unsigned long)base + info->dataoffset;
391 hw->io_ports.data_addr = port;
392 hw->io_ports.error_addr = port + (1 << info->stepping);
393 hw->io_ports.nsect_addr = port + (2 << info->stepping);
394 hw->io_ports.lbal_addr = port + (3 << info->stepping);
395 hw->io_ports.lbam_addr = port + (4 << info->stepping);
396 hw->io_ports.lbah_addr = port + (5 << info->stepping);
397 hw->io_ports.device_addr = port + (6 << info->stepping);
398 hw->io_ports.status_addr = port + (7 << info->stepping);
399 hw->io_ports.ctl_addr = (unsigned long)base + info->ctrloffset;
405 static const struct ide_port_info icside_v5_port_info = {
406 .host_flags = IDE_HFLAG_NO_DMA,
407 .chipset = ide_acorn,
411 icside_register_v5(struct icside_state *state, struct expansion_card *ec)
414 struct ide_host *host;
415 struct ide_hw hw, *hws[] = { &hw };
418 base = ecardm_iomap(ec, ECARD_RES_MEMC, 0, 0);
422 state->irq_port = base;
424 ec->irqaddr = base + ICS_ARCIN_V5_INTRSTAT;
427 ecard_setirq(ec, &icside_ops_arcin_v5, state);
430 * Be on the safe side - disable interrupts
432 icside_irqdisable_arcin_v5(ec, 0);
434 icside_setup_ports(&hw, base, &icside_cardinfo_v5, ec);
436 host = ide_host_alloc(&icside_v5_port_info, hws, 1);
442 ecard_set_drvdata(ec, state);
444 ret = ide_host_register(host, &icside_v5_port_info, hws);
451 ecard_set_drvdata(ec, NULL);
455 static const struct ide_port_info icside_v6_port_info __initdata = {
456 .init_dma = icside_dma_off_init,
457 .port_ops = &icside_v6_no_dma_port_ops,
458 .dma_ops = &icside_v6_dma_ops,
459 .host_flags = IDE_HFLAG_SERIALIZE | IDE_HFLAG_MMIO,
460 .mwdma_mask = ATA_MWDMA2,
461 .swdma_mask = ATA_SWDMA2,
462 .chipset = ide_acorn,
466 icside_register_v6(struct icside_state *state, struct expansion_card *ec)
468 void __iomem *ioc_base, *easi_base;
469 struct ide_host *host;
470 unsigned int sel = 0;
472 struct ide_hw hw[2], *hws[] = { &hw[0], &hw[1] };
473 struct ide_port_info d = icside_v6_port_info;
475 ioc_base = ecardm_iomap(ec, ECARD_RES_IOCFAST, 0, 0);
481 easi_base = ioc_base;
483 if (ecard_resource_flags(ec, ECARD_RES_EASI)) {
484 easi_base = ecardm_iomap(ec, ECARD_RES_EASI, 0, 0);
491 * Enable access to the EASI region.
496 writeb(sel, ioc_base);
498 ecard_setirq(ec, &icside_ops_arcin_v6, state);
500 state->irq_port = easi_base;
501 state->ioc_base = ioc_base;
505 * Be on the safe side - disable interrupts
507 icside_irqdisable_arcin_v6(ec, 0);
509 icside_setup_ports(&hw[0], easi_base, &icside_cardinfo_v6_1, ec);
510 icside_setup_ports(&hw[1], easi_base, &icside_cardinfo_v6_2, ec);
512 host = ide_host_alloc(&d, hws, 2);
518 ecard_set_drvdata(ec, state);
520 if (ec->dma != NO_DMA && !request_dma(ec->dma, DRV_NAME)) {
521 d.init_dma = icside_dma_init;
522 d.port_ops = &icside_v6_port_ops;
526 ret = ide_host_register(host, &d, hws);
535 ecard_set_drvdata(ec, NULL);
541 icside_probe(struct expansion_card *ec, const struct ecard_id *id)
543 struct icside_state *state;
547 ret = ecard_request_resources(ec);
551 state = kzalloc(sizeof(struct icside_state), GFP_KERNEL);
557 state->type = ICS_TYPE_NOTYPE;
559 idmem = ecardm_iomap(ec, ECARD_RES_IOCFAST, 0, 0);
563 type = readb(idmem + ICS_IDENT_OFFSET) & 1;
564 type |= (readb(idmem + ICS_IDENT_OFFSET + 4) & 1) << 1;
565 type |= (readb(idmem + ICS_IDENT_OFFSET + 8) & 1) << 2;
566 type |= (readb(idmem + ICS_IDENT_OFFSET + 12) & 1) << 3;
567 ecardm_iounmap(ec, idmem);
572 switch (state->type) {
574 dev_warn(&ec->dev, "A3IN unsupported\n");
578 case ICS_TYPE_A3USER:
579 dev_warn(&ec->dev, "A3USER unsupported\n");
584 ret = icside_register_v5(state, ec);
588 ret = icside_register_v6(state, ec);
592 dev_warn(&ec->dev, "unknown interface type\n");
602 ecard_release_resources(ec);
607 static void __devexit icside_remove(struct expansion_card *ec)
609 struct icside_state *state = ecard_get_drvdata(ec);
611 switch (state->type) {
613 /* FIXME: tell IDE to stop using the interface */
615 /* Disable interrupts */
616 icside_irqdisable_arcin_v5(ec, 0);
620 /* FIXME: tell IDE to stop using the interface */
621 if (ec->dma != NO_DMA)
624 /* Disable interrupts */
625 icside_irqdisable_arcin_v6(ec, 0);
627 /* Reset the ROM pointer/EASI selection */
628 writeb(0, state->ioc_base);
632 ecard_set_drvdata(ec, NULL);
635 ecard_release_resources(ec);
638 static void icside_shutdown(struct expansion_card *ec)
640 struct icside_state *state = ecard_get_drvdata(ec);
644 * Disable interrupts from this card. We need to do
645 * this before disabling EASI since we may be accessing
646 * this register via that region.
648 local_irq_save(flags);
649 ec->ops->irqdisable(ec, 0);
650 local_irq_restore(flags);
653 * Reset the ROM pointer so that we can read the ROM
654 * after a soft reboot. This also disables access to
655 * the IDE taskfile via the EASI region.
658 writeb(0, state->ioc_base);
661 static const struct ecard_id icside_ids[] = {
662 { MANU_ICS, PROD_ICS_IDE },
663 { MANU_ICS2, PROD_ICS2_IDE },
667 static struct ecard_driver icside_driver = {
668 .probe = icside_probe,
669 .remove = __devexit_p(icside_remove),
670 .shutdown = icside_shutdown,
671 .id_table = icside_ids,
677 static int __init icside_init(void)
679 return ecard_register_driver(&icside_driver);
682 static void __exit icside_exit(void)
684 ecard_remove_driver(&icside_driver);
687 MODULE_AUTHOR("Russell King <rmk@arm.linux.org.uk>");
688 MODULE_LICENSE("GPL");
689 MODULE_DESCRIPTION("ICS IDE driver");
691 module_init(icside_init);
692 module_exit(icside_exit);