4 # When adding new entries keep the list in alphabetical order
9 tristate "ACPI Ambient Light Sensor"
12 select IIO_TRIGGERED_BUFFER
15 Say Y here if you want to build a driver for the ACPI0008
18 To compile this driver as a module, choose M here: the module will
22 tristate "ADJD-S311-CR999 digital color sensor"
24 select IIO_TRIGGERED_BUFFER
27 If you say yes here you get support for the Avago ADJD-S311-CR999
28 digital color light sensor.
30 This driver can also be built as a module. If so, the module
31 will be called adjd_s311.
34 tristate "AL3320A ambient light sensor"
37 Say Y here if you want to build a driver for the Dyna Image AL3320A
40 To compile this driver as a module, choose M here: the
41 module will be called al3320a.
44 tristate "APDS9300 ambient light sensor"
47 Say Y here if you want to build a driver for the Avago APDS9300
50 To compile this driver as a module, choose M here: the
51 module will be called apds9300.
54 tristate "ROHM BH1750 ambient light sensor"
57 Say Y here to build support for the ROHM BH1710, BH1715, BH1721,
58 BH1750, BH1751 ambient light sensors.
60 To compile this driver as a module, choose M here: the module will
65 tristate "CM32181 driver"
67 Say Y here if you use cm32181.
68 This option enables ambient light sensor using
69 Capella cm32181 device driver.
71 To compile this driver as a module, choose M here:
72 the module will be called cm32181.
76 tristate "CM3232 ambient light sensor"
78 Say Y here if you use cm3232.
79 This option enables ambient light sensor using
80 Capella Microsystems cm3232 device driver.
82 To compile this driver as a module, choose M here:
83 the module will be called cm3232.
87 tristate "Capella CM3323 color light sensor"
89 Say Y here if you want to build a driver for Capela CM3323
92 To compile this driver as a module, choose M here: the module will
97 tristate "CM36651 driver"
99 Say Y here if you use cm36651.
100 This option enables proximity & RGB sensor using
101 Capella cm36651 device driver.
103 To compile this driver as a module, choose M here:
104 the module will be called cm36651.
107 tristate "Sharp GP2AP020A00F Proximity/ALS sensor"
111 select IIO_TRIGGERED_BUFFER
114 Say Y here if you have a Sharp GP2AP020A00F proximity/ALS combo-chip
115 hooked to an I2C bus.
117 To compile this driver as a module, choose M here: the
118 module will be called gp2ap020a00f.
121 tristate "Intersil ISL29125 digital color light sensor"
124 select IIO_TRIGGERED_BUFFER
126 Say Y here if you want to build a driver for the Intersil ISL29125
127 RGB light sensor for I2C.
129 To compile this driver as a module, choose M here: the module will be
132 config HID_SENSOR_ALS
133 depends on HID_SENSOR_HUB
135 select IIO_TRIGGERED_BUFFER
136 select HID_SENSOR_IIO_COMMON
137 select HID_SENSOR_IIO_TRIGGER
140 Say yes here to build support for the HID SENSOR
141 Ambient light sensor.
143 To compile this driver as a module, choose M here: the
144 module will be called hid-sensor-als.
146 config HID_SENSOR_PROX
147 depends on HID_SENSOR_HUB
149 select IIO_TRIGGERED_BUFFER
150 select HID_SENSOR_IIO_COMMON
151 select HID_SENSOR_IIO_TRIGGER
154 Say yes here to build support for the HID SENSOR
157 To compile this driver as a module, choose M here: the
158 module will be called hid-sensor-prox.
161 tristate "JSA1212 ALS and proximity sensor driver"
165 Say Y here if you want to build a IIO driver for JSA1212
166 proximity & ALS sensor device.
168 To compile this driver as a module, choose M here:
169 the module will be called jsa1212.
171 config SENSORS_LM3533
172 tristate "LM3533 ambient light sensor"
173 depends on MFD_LM3533
175 If you say yes here you get support for the ambient light sensor
176 interface on National Semiconductor / TI LM3533 Lighting Power
179 The sensor interface can be used to control the LEDs and backlights
180 of the chip through defining five light zones and three sets of
181 corresponding output-current values.
183 The driver provides raw and mean adc readings along with the current
184 light zone through sysfs. A threshold event can be generated on zone
185 changes. The ALS-control output values can be set per zone for the
186 three current output channels.
189 tristate "LTR-501ALS-01 light sensor"
192 select IIO_TRIGGERED_BUFFER
194 If you say yes here you get support for the Lite-On LTR-501ALS-01
195 ambient light and proximity sensor. This driver also supports LTR-559
196 ALS/PS or LTR-301 ALS sensors.
198 This driver can also be built as a module. If so, the module
199 will be called ltr501.
202 tristate "STK3310 ALS and proximity sensor"
205 Say yes here to get support for the Sensortek STK3310 ambient light
206 and proximity sensor. The STK3311 model is also supported by this
209 Choosing M will build the driver as a module. If so, the module
210 will be called stk3310.
213 tristate "TAOS TCS3414 digital color sensor"
216 select IIO_TRIGGERED_BUFFER
218 If you say yes here you get support for the TAOS TCS3414
219 family of digital color sensors.
221 This driver can also be built as a module. If so, the module
222 will be called tcs3414.
225 tristate "TAOS TCS3472 color light-to-digital converter"
228 select IIO_TRIGGERED_BUFFER
230 If you say yes here you get support for the TAOS TCS3472
231 family of color light-to-digital converters with IR filter.
233 This driver can also be built as a module. If so, the module
234 will be called tcs3472.
236 config SENSORS_TSL2563
237 tristate "TAOS TSL2560, TSL2561, TSL2562 and TSL2563 ambient light sensors"
240 If you say yes here you get support for the Taos TSL2560,
241 TSL2561, TSL2562 and TSL2563 ambient light sensors.
243 This driver can also be built as a module. If so, the module
244 will be called tsl2563.
247 tristate "TAOS TSL4531 ambient light sensors"
250 Say Y here if you want to build a driver for the TAOS TSL4531 family
251 of ambient light sensors with direct lux output.
253 To compile this driver as a module, choose M here: the
254 module will be called tsl4531.
257 tristate "VCNL4000 combined ALS and proximity sensor"
260 Say Y here if you want to build a driver for the Vishay VCNL4000
261 combined ambient light and proximity sensor.
263 To compile this driver as a module, choose M here: the
264 module will be called vcnl4000.