2 * AT and PS/2 keyboard driver
4 * Copyright (c) 1999-2002 Vojtech Pavlik
8 * This program is free software; you can redistribute it and/or modify it
9 * under the terms of the GNU General Public License version 2 as published by
10 * the Free Software Foundation.
14 * This driver can handle standard AT keyboards and PS/2 keyboards in
15 * Translated and Raw Set 2 and Set 3, as well as AT keyboards on dumb
16 * input-only controllers and AT keyboards connected over a one way RS232
20 #include <linux/delay.h>
21 #include <linux/module.h>
22 #include <linux/slab.h>
23 #include <linux/interrupt.h>
24 #include <linux/init.h>
25 #include <linux/input.h>
26 #include <linux/serio.h>
27 #include <linux/workqueue.h>
28 #include <linux/libps2.h>
29 #include <linux/mutex.h>
30 #include <linux/dmi.h>
32 #define DRIVER_DESC "AT and PS/2 keyboard driver"
34 MODULE_AUTHOR("Vojtech Pavlik <vojtech@suse.cz>");
35 MODULE_DESCRIPTION(DRIVER_DESC);
36 MODULE_LICENSE("GPL");
38 static int atkbd_set = 2;
39 module_param_named(set, atkbd_set, int, 0);
40 MODULE_PARM_DESC(set, "Select keyboard code set (2 = default, 3 = PS/2 native)");
42 #if defined(__i386__) || defined(__x86_64__) || defined(__hppa__)
43 static int atkbd_reset;
45 static int atkbd_reset = 1;
47 module_param_named(reset, atkbd_reset, bool, 0);
48 MODULE_PARM_DESC(reset, "Reset keyboard during initialization");
50 static int atkbd_softrepeat;
51 module_param_named(softrepeat, atkbd_softrepeat, bool, 0);
52 MODULE_PARM_DESC(softrepeat, "Use software keyboard repeat");
54 static int atkbd_softraw = 1;
55 module_param_named(softraw, atkbd_softraw, bool, 0);
56 MODULE_PARM_DESC(softraw, "Use software generated rawmode");
58 static int atkbd_scroll;
59 module_param_named(scroll, atkbd_scroll, bool, 0);
60 MODULE_PARM_DESC(scroll, "Enable scroll-wheel on MS Office and similar keyboards");
62 static int atkbd_extra;
63 module_param_named(extra, atkbd_extra, bool, 0);
64 MODULE_PARM_DESC(extra, "Enable extra LEDs and keys on IBM RapidAcces, EzKey and similar keyboards");
67 * Scancode to keycode tables. These are just the default setting, and
68 * are loadable via a userland utility.
71 static const unsigned short atkbd_set2_keycode[512] = {
73 #ifdef CONFIG_KEYBOARD_ATKBD_HP_KEYCODES
75 /* XXX: need a more general approach */
77 #include "hpps2atkbd.h" /* include the keyboard scancodes */
80 0, 67, 65, 63, 61, 59, 60, 88, 0, 68, 66, 64, 62, 15, 41,117,
81 0, 56, 42, 93, 29, 16, 2, 0, 0, 0, 44, 31, 30, 17, 3, 0,
82 0, 46, 45, 32, 18, 5, 4, 95, 0, 57, 47, 33, 20, 19, 6,183,
83 0, 49, 48, 35, 34, 21, 7,184, 0, 0, 50, 36, 22, 8, 9,185,
84 0, 51, 37, 23, 24, 11, 10, 0, 0, 52, 53, 38, 39, 25, 12, 0,
85 0, 89, 40, 0, 26, 13, 0, 0, 58, 54, 28, 27, 0, 43, 0, 85,
86 0, 86, 91, 90, 92, 0, 14, 94, 0, 79,124, 75, 71,121, 0, 0,
87 82, 83, 80, 76, 77, 72, 1, 69, 87, 78, 81, 74, 55, 73, 70, 99,
89 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
90 217,100,255, 0, 97,165, 0, 0,156, 0, 0, 0, 0, 0, 0,125,
91 173,114, 0,113, 0, 0, 0,126,128, 0, 0,140, 0, 0, 0,127,
92 159, 0,115, 0,164, 0, 0,116,158, 0,172,166, 0, 0, 0,142,
93 157, 0, 0, 0, 0, 0, 0, 0,155, 0, 98, 0, 0,163, 0, 0,
94 226, 0, 0, 0, 0, 0, 0, 0, 0,255, 96, 0, 0, 0,143, 0,
95 0, 0, 0, 0, 0, 0, 0, 0, 0,107, 0,105,102, 0, 0,112,
96 110,111,108,112,106,103, 0,119, 0,118,109, 0, 99,104,119, 0,
102 static const unsigned short atkbd_set3_keycode[512] = {
104 0, 0, 0, 0, 0, 0, 0, 59, 1,138,128,129,130, 15, 41, 60,
105 131, 29, 42, 86, 58, 16, 2, 61,133, 56, 44, 31, 30, 17, 3, 62,
106 134, 46, 45, 32, 18, 5, 4, 63,135, 57, 47, 33, 20, 19, 6, 64,
107 136, 49, 48, 35, 34, 21, 7, 65,137,100, 50, 36, 22, 8, 9, 66,
108 125, 51, 37, 23, 24, 11, 10, 67,126, 52, 53, 38, 39, 25, 12, 68,
109 113,114, 40, 43, 26, 13, 87, 99, 97, 54, 28, 27, 43, 43, 88, 70,
110 108,105,119,103,111,107, 14,110, 0, 79,106, 75, 71,109,102,104,
111 82, 83, 80, 76, 77, 72, 69, 98, 0, 96, 81, 0, 78, 73, 55,183,
113 184,185,186,187, 74, 94, 92, 93, 0, 0, 0,125,126,127,112, 0,
114 0,139,172,163,165,115,152,172,166,140,160,154,113,114,167,168,
118 static const unsigned short atkbd_unxlate_table[128] = {
119 0,118, 22, 30, 38, 37, 46, 54, 61, 62, 70, 69, 78, 85,102, 13,
120 21, 29, 36, 45, 44, 53, 60, 67, 68, 77, 84, 91, 90, 20, 28, 27,
121 35, 43, 52, 51, 59, 66, 75, 76, 82, 14, 18, 93, 26, 34, 33, 42,
122 50, 49, 58, 65, 73, 74, 89,124, 17, 41, 88, 5, 6, 4, 12, 3,
123 11, 2, 10, 1, 9,119,126,108,117,125,123,107,115,116,121,105,
124 114,122,112,113,127, 96, 97,120, 7, 15, 23, 31, 39, 47, 55, 63,
125 71, 79, 86, 94, 8, 16, 24, 32, 40, 48, 56, 64, 72, 80, 87,111,
126 19, 25, 57, 81, 83, 92, 95, 98, 99,100,101,103,104,106,109,110
129 #define ATKBD_CMD_SETLEDS 0x10ed
130 #define ATKBD_CMD_GSCANSET 0x11f0
131 #define ATKBD_CMD_SSCANSET 0x10f0
132 #define ATKBD_CMD_GETID 0x02f2
133 #define ATKBD_CMD_SETREP 0x10f3
134 #define ATKBD_CMD_ENABLE 0x00f4
135 #define ATKBD_CMD_RESET_DIS 0x00f5
136 #define ATKBD_CMD_SETALL_MBR 0x00fa
137 #define ATKBD_CMD_RESET_BAT 0x02ff
138 #define ATKBD_CMD_RESEND 0x00fe
139 #define ATKBD_CMD_EX_ENABLE 0x10ea
140 #define ATKBD_CMD_EX_SETLEDS 0x20eb
141 #define ATKBD_CMD_OK_GETID 0x02e8
143 #define ATKBD_RET_ACK 0xfa
144 #define ATKBD_RET_NAK 0xfe
145 #define ATKBD_RET_BAT 0xaa
146 #define ATKBD_RET_EMUL0 0xe0
147 #define ATKBD_RET_EMUL1 0xe1
148 #define ATKBD_RET_RELEASE 0xf0
149 #define ATKBD_RET_HANJA 0xf1
150 #define ATKBD_RET_HANGEUL 0xf2
151 #define ATKBD_RET_ERR 0xff
153 #define ATKBD_KEY_UNKNOWN 0
154 #define ATKBD_KEY_NULL 255
156 #define ATKBD_SCR_1 254
157 #define ATKBD_SCR_2 253
158 #define ATKBD_SCR_4 252
159 #define ATKBD_SCR_8 251
160 #define ATKBD_SCR_CLICK 250
161 #define ATKBD_SCR_LEFT 249
162 #define ATKBD_SCR_RIGHT 248
164 #define ATKBD_SPECIAL ATKBD_SCR_RIGHT
166 #define ATKBD_LED_EVENT_BIT 0
167 #define ATKBD_REP_EVENT_BIT 1
169 #define ATKBD_XL_ERR 0x01
170 #define ATKBD_XL_BAT 0x02
171 #define ATKBD_XL_ACK 0x04
172 #define ATKBD_XL_NAK 0x08
173 #define ATKBD_XL_HANGEUL 0x10
174 #define ATKBD_XL_HANJA 0x20
176 static const struct {
177 unsigned char keycode;
179 } atkbd_scroll_keys[] = {
180 { ATKBD_SCR_1, 0xc5 },
181 { ATKBD_SCR_2, 0x9d },
182 { ATKBD_SCR_4, 0xa4 },
183 { ATKBD_SCR_8, 0x9b },
184 { ATKBD_SCR_CLICK, 0xe0 },
185 { ATKBD_SCR_LEFT, 0xcb },
186 { ATKBD_SCR_RIGHT, 0xd2 },
190 * The atkbd control structure
195 struct ps2dev ps2dev;
196 struct input_dev *dev;
198 /* Written only during init */
203 unsigned short keycode[512];
204 DECLARE_BITMAP(force_release_mask, 512);
206 unsigned char translated;
209 unsigned char softrepeat;
210 unsigned char softraw;
211 unsigned char scroll;
212 unsigned char enabled;
214 /* Accessed only from interrupt */
216 unsigned char resend;
217 unsigned char release;
218 unsigned long xl_bit;
221 unsigned long err_count;
223 struct delayed_work event_work;
224 unsigned long event_jiffies;
225 struct mutex event_mutex;
226 unsigned long event_mask;
230 * System-specific ketymap fixup routine
232 static void (*atkbd_platform_fixup)(struct atkbd *, const void *data);
233 static void *atkbd_platform_fixup_data;
235 static ssize_t atkbd_attr_show_helper(struct device *dev, char *buf,
236 ssize_t (*handler)(struct atkbd *, char *));
237 static ssize_t atkbd_attr_set_helper(struct device *dev, const char *buf, size_t count,
238 ssize_t (*handler)(struct atkbd *, const char *, size_t));
239 #define ATKBD_DEFINE_ATTR(_name) \
240 static ssize_t atkbd_show_##_name(struct atkbd *, char *); \
241 static ssize_t atkbd_set_##_name(struct atkbd *, const char *, size_t); \
242 static ssize_t atkbd_do_show_##_name(struct device *d, \
243 struct device_attribute *attr, char *b) \
245 return atkbd_attr_show_helper(d, b, atkbd_show_##_name); \
247 static ssize_t atkbd_do_set_##_name(struct device *d, \
248 struct device_attribute *attr, const char *b, size_t s) \
250 return atkbd_attr_set_helper(d, b, s, atkbd_set_##_name); \
252 static struct device_attribute atkbd_attr_##_name = \
253 __ATTR(_name, S_IWUSR | S_IRUGO, atkbd_do_show_##_name, atkbd_do_set_##_name);
255 ATKBD_DEFINE_ATTR(extra);
256 ATKBD_DEFINE_ATTR(scroll);
257 ATKBD_DEFINE_ATTR(set);
258 ATKBD_DEFINE_ATTR(softrepeat);
259 ATKBD_DEFINE_ATTR(softraw);
261 #define ATKBD_DEFINE_RO_ATTR(_name) \
262 static ssize_t atkbd_show_##_name(struct atkbd *, char *); \
263 static ssize_t atkbd_do_show_##_name(struct device *d, \
264 struct device_attribute *attr, char *b) \
266 return atkbd_attr_show_helper(d, b, atkbd_show_##_name); \
268 static struct device_attribute atkbd_attr_##_name = \
269 __ATTR(_name, S_IRUGO, atkbd_do_show_##_name, NULL);
271 ATKBD_DEFINE_RO_ATTR(err_count);
273 static struct attribute *atkbd_attributes[] = {
274 &atkbd_attr_extra.attr,
275 &atkbd_attr_scroll.attr,
276 &atkbd_attr_set.attr,
277 &atkbd_attr_softrepeat.attr,
278 &atkbd_attr_softraw.attr,
279 &atkbd_attr_err_count.attr,
283 static struct attribute_group atkbd_attribute_group = {
284 .attrs = atkbd_attributes,
287 static const unsigned int xl_table[] = {
288 ATKBD_RET_BAT, ATKBD_RET_ERR, ATKBD_RET_ACK,
289 ATKBD_RET_NAK, ATKBD_RET_HANJA, ATKBD_RET_HANGEUL,
293 * Checks if we should mangle the scancode to extract 'release' bit
294 * in translated mode.
296 static int atkbd_need_xlate(unsigned long xl_bit, unsigned char code)
300 if (code == ATKBD_RET_EMUL0 || code == ATKBD_RET_EMUL1)
303 for (i = 0; i < ARRAY_SIZE(xl_table); i++)
304 if (code == xl_table[i])
305 return test_bit(i, &xl_bit);
311 * Calculates new value of xl_bit so the driver can distinguish
312 * between make/break pair of scancodes for select keys and PS/2
313 * protocol responses.
315 static void atkbd_calculate_xl_bit(struct atkbd *atkbd, unsigned char code)
319 for (i = 0; i < ARRAY_SIZE(xl_table); i++) {
320 if (!((code ^ xl_table[i]) & 0x7f)) {
322 __clear_bit(i, &atkbd->xl_bit);
324 __set_bit(i, &atkbd->xl_bit);
331 * Encode the scancode, 0xe0 prefix, and high bit into a single integer,
332 * keeping kernel 2.4 compatibility for set 2
334 static unsigned int atkbd_compat_scancode(struct atkbd *atkbd, unsigned int code)
336 if (atkbd->set == 3) {
337 if (atkbd->emul == 1)
340 code = (code & 0x7f) | ((code & 0x80) << 1);
341 if (atkbd->emul == 1)
349 * atkbd_interrupt(). Here takes place processing of data received from
350 * the keyboard into events.
353 static irqreturn_t atkbd_interrupt(struct serio *serio, unsigned char data,
356 struct atkbd *atkbd = serio_get_drvdata(serio);
357 struct input_dev *dev = atkbd->dev;
358 unsigned int code = data;
359 int scroll = 0, hscroll = 0, click = -1;
361 unsigned short keycode;
364 printk(KERN_DEBUG "atkbd.c: Received %02x flags %02x\n", data, flags);
367 #if !defined(__i386__) && !defined (__x86_64__)
368 if ((flags & (SERIO_FRAME | SERIO_PARITY)) && (~flags & SERIO_TIMEOUT) && !atkbd->resend && atkbd->write) {
369 printk(KERN_WARNING "atkbd.c: frame/parity error: %02x\n", flags);
370 serio_write(serio, ATKBD_CMD_RESEND);
375 if (!flags && data == ATKBD_RET_ACK)
379 if (unlikely(atkbd->ps2dev.flags & PS2_FLAG_ACK))
380 if (ps2_handle_ack(&atkbd->ps2dev, data))
383 if (unlikely(atkbd->ps2dev.flags & PS2_FLAG_CMD))
384 if (ps2_handle_response(&atkbd->ps2dev, data))
390 input_event(dev, EV_MSC, MSC_RAW, code);
392 if (atkbd->translated) {
394 if (atkbd->emul || atkbd_need_xlate(atkbd->xl_bit, code)) {
395 atkbd->release = code >> 7;
400 atkbd_calculate_xl_bit(atkbd, data);
406 serio_reconnect(atkbd->ps2dev.serio);
408 case ATKBD_RET_EMUL0:
411 case ATKBD_RET_EMUL1:
414 case ATKBD_RET_RELEASE:
419 if (printk_ratelimit())
420 printk(KERN_WARNING "atkbd.c: Spurious %s on %s. "
421 "Some program might be trying access hardware directly.\n",
422 data == ATKBD_RET_ACK ? "ACK" : "NAK", serio->phys);
427 printk(KERN_DEBUG "atkbd.c: Keyboard on %s reports too many keys pressed.\n", serio->phys);
432 code = atkbd_compat_scancode(atkbd, code);
434 if (atkbd->emul && --atkbd->emul)
437 keycode = atkbd->keycode[code];
439 if (keycode != ATKBD_KEY_NULL)
440 input_event(dev, EV_MSC, MSC_SCAN, code);
445 case ATKBD_KEY_UNKNOWN:
447 "atkbd.c: Unknown key %s (%s set %d, code %#x on %s).\n",
448 atkbd->release ? "released" : "pressed",
449 atkbd->translated ? "translated" : "raw",
450 atkbd->set, code, serio->phys);
452 "atkbd.c: Use 'setkeycodes %s%02x <keycode>' to make it known.\n",
453 code & 0x80 ? "e0" : "", code & 0x7f);
457 scroll = 1 - atkbd->release * 2;
460 scroll = 2 - atkbd->release * 4;
463 scroll = 4 - atkbd->release * 8;
466 scroll = 8 - atkbd->release * 16;
468 case ATKBD_SCR_CLICK:
469 click = !atkbd->release;
474 case ATKBD_SCR_RIGHT:
478 if (atkbd->release) {
481 } else if (!atkbd->softrepeat && test_bit(keycode, dev->key)) {
482 /* Workaround Toshiba laptop multiple keypress */
483 value = time_before(jiffies, atkbd->time) && atkbd->last == code ? 1 : 2;
487 atkbd->time = jiffies + msecs_to_jiffies(dev->rep[REP_DELAY]) / 2;
490 input_event(dev, EV_KEY, keycode, value);
493 if (value && test_bit(code, atkbd->force_release_mask)) {
494 input_report_key(dev, keycode, 0);
501 input_report_key(dev, BTN_MIDDLE, click);
502 input_report_rel(dev, REL_WHEEL, scroll);
503 input_report_rel(dev, REL_HWHEEL, hscroll);
512 static int atkbd_set_repeat_rate(struct atkbd *atkbd)
514 const short period[32] =
515 { 33, 37, 42, 46, 50, 54, 58, 63, 67, 75, 83, 92, 100, 109, 116, 125,
516 133, 149, 167, 182, 200, 217, 232, 250, 270, 303, 333, 370, 400, 435, 470, 500 };
517 const short delay[4] =
518 { 250, 500, 750, 1000 };
520 struct input_dev *dev = atkbd->dev;
524 while (i < ARRAY_SIZE(period) - 1 && period[i] < dev->rep[REP_PERIOD])
526 dev->rep[REP_PERIOD] = period[i];
528 while (j < ARRAY_SIZE(delay) - 1 && delay[j] < dev->rep[REP_DELAY])
530 dev->rep[REP_DELAY] = delay[j];
532 param = i | (j << 5);
533 return ps2_command(&atkbd->ps2dev, ¶m, ATKBD_CMD_SETREP);
536 static int atkbd_set_leds(struct atkbd *atkbd)
538 struct input_dev *dev = atkbd->dev;
539 unsigned char param[2];
541 param[0] = (test_bit(LED_SCROLLL, dev->led) ? 1 : 0)
542 | (test_bit(LED_NUML, dev->led) ? 2 : 0)
543 | (test_bit(LED_CAPSL, dev->led) ? 4 : 0);
544 if (ps2_command(&atkbd->ps2dev, param, ATKBD_CMD_SETLEDS))
549 param[1] = (test_bit(LED_COMPOSE, dev->led) ? 0x01 : 0)
550 | (test_bit(LED_SLEEP, dev->led) ? 0x02 : 0)
551 | (test_bit(LED_SUSPEND, dev->led) ? 0x04 : 0)
552 | (test_bit(LED_MISC, dev->led) ? 0x10 : 0)
553 | (test_bit(LED_MUTE, dev->led) ? 0x20 : 0);
554 if (ps2_command(&atkbd->ps2dev, param, ATKBD_CMD_EX_SETLEDS))
562 * atkbd_event_work() is used to complete processing of events that
563 * can not be processed by input_event() which is often called from
567 static void atkbd_event_work(struct work_struct *work)
569 struct atkbd *atkbd = container_of(work, struct atkbd, event_work.work);
571 mutex_lock(&atkbd->event_mutex);
573 if (test_and_clear_bit(ATKBD_LED_EVENT_BIT, &atkbd->event_mask))
574 atkbd_set_leds(atkbd);
576 if (test_and_clear_bit(ATKBD_REP_EVENT_BIT, &atkbd->event_mask))
577 atkbd_set_repeat_rate(atkbd);
579 mutex_unlock(&atkbd->event_mutex);
583 * Schedule switch for execution. We need to throttle requests,
584 * otherwise keyboard may become unresponsive.
586 static void atkbd_schedule_event_work(struct atkbd *atkbd, int event_bit)
588 unsigned long delay = msecs_to_jiffies(50);
590 if (time_after(jiffies, atkbd->event_jiffies + delay))
593 atkbd->event_jiffies = jiffies;
594 set_bit(event_bit, &atkbd->event_mask);
596 schedule_delayed_work(&atkbd->event_work, delay);
600 * Event callback from the input module. Events that change the state of
601 * the hardware are processed here. If action can not be performed in
602 * interrupt context it is offloaded to atkbd_event_work.
605 static int atkbd_event(struct input_dev *dev,
606 unsigned int type, unsigned int code, int value)
608 struct atkbd *atkbd = input_get_drvdata(dev);
616 atkbd_schedule_event_work(atkbd, ATKBD_LED_EVENT_BIT);
620 if (!atkbd->softrepeat)
621 atkbd_schedule_event_work(atkbd, ATKBD_REP_EVENT_BIT);
629 * atkbd_enable() signals that interrupt handler is allowed to
630 * generate input events.
633 static inline void atkbd_enable(struct atkbd *atkbd)
635 serio_pause_rx(atkbd->ps2dev.serio);
637 serio_continue_rx(atkbd->ps2dev.serio);
641 * atkbd_disable() tells input handler that all incoming data except
642 * for ACKs and command response should be dropped.
645 static inline void atkbd_disable(struct atkbd *atkbd)
647 serio_pause_rx(atkbd->ps2dev.serio);
649 serio_continue_rx(atkbd->ps2dev.serio);
653 * atkbd_probe() probes for an AT keyboard on a serio port.
656 static int atkbd_probe(struct atkbd *atkbd)
658 struct ps2dev *ps2dev = &atkbd->ps2dev;
659 unsigned char param[2];
662 * Some systems, where the bit-twiddling when testing the io-lines of the
663 * controller may confuse the keyboard need a full reset of the keyboard. On
664 * these systems the BIOS also usually doesn't do it for us.
668 if (ps2_command(ps2dev, NULL, ATKBD_CMD_RESET_BAT))
669 printk(KERN_WARNING "atkbd.c: keyboard reset failed on %s\n", ps2dev->serio->phys);
672 * Then we check the keyboard ID. We should get 0xab83 under normal conditions.
673 * Some keyboards report different values, but the first byte is always 0xab or
674 * 0xac. Some old AT keyboards don't report anything. If a mouse is connected, this
675 * should make sure we don't try to set the LEDs on it.
678 param[0] = param[1] = 0xa5; /* initialize with invalid values */
679 if (ps2_command(ps2dev, param, ATKBD_CMD_GETID)) {
682 * If the get ID command failed, we check if we can at least set the LEDs on
683 * the keyboard. This should work on every keyboard out there. It also turns
684 * the LEDs off, which we want anyway.
687 if (ps2_command(ps2dev, param, ATKBD_CMD_SETLEDS))
693 if (!ps2_is_keyboard_id(param[0]))
696 atkbd->id = (param[0] << 8) | param[1];
698 if (atkbd->id == 0xaca1 && atkbd->translated) {
699 printk(KERN_ERR "atkbd.c: NCD terminal keyboards are only supported on non-translating\n");
700 printk(KERN_ERR "atkbd.c: controllers. Use i8042.direct=1 to disable translation.\n");
708 * atkbd_select_set checks if a keyboard has a working Set 3 support, and
709 * sets it into that. Unfortunately there are keyboards that can be switched
710 * to Set 3, but don't work well in that (BTC Multimedia ...)
713 static int atkbd_select_set(struct atkbd *atkbd, int target_set, int allow_extra)
715 struct ps2dev *ps2dev = &atkbd->ps2dev;
716 unsigned char param[2];
720 * For known special keyboards we can go ahead and set the correct set.
721 * We check for NCD PS/2 Sun, NorthGate OmniKey 101 and
722 * IBM RapidAccess / IBM EzButton / Chicony KBP-8993 keyboards.
725 if (atkbd->translated)
728 if (atkbd->id == 0xaca1) {
730 ps2_command(ps2dev, param, ATKBD_CMD_SSCANSET);
736 if (!ps2_command(ps2dev, param, ATKBD_CMD_EX_ENABLE)) {
745 if (!ps2_command(ps2dev, param, ATKBD_CMD_OK_GETID)) {
746 atkbd->id = param[0] << 8 | param[1];
751 if (ps2_command(ps2dev, param, ATKBD_CMD_SSCANSET))
755 if (ps2_command(ps2dev, param, ATKBD_CMD_GSCANSET))
760 if (ps2_command(ps2dev, param, ATKBD_CMD_SSCANSET))
764 ps2_command(ps2dev, param, ATKBD_CMD_SETALL_MBR);
769 static int atkbd_activate(struct atkbd *atkbd)
771 struct ps2dev *ps2dev = &atkbd->ps2dev;
772 unsigned char param[1];
775 * Set the LEDs to a defined state.
779 if (ps2_command(ps2dev, param, ATKBD_CMD_SETLEDS))
783 * Set autorepeat to fastest possible.
787 if (ps2_command(ps2dev, param, ATKBD_CMD_SETREP))
791 * Enable the keyboard to receive keystrokes.
794 if (ps2_command(ps2dev, NULL, ATKBD_CMD_ENABLE)) {
795 printk(KERN_ERR "atkbd.c: Failed to enable keyboard on %s\n",
796 ps2dev->serio->phys);
804 * atkbd_cleanup() restores the keyboard state so that BIOS is happy after a
808 static void atkbd_cleanup(struct serio *serio)
810 struct atkbd *atkbd = serio_get_drvdata(serio);
812 atkbd_disable(atkbd);
813 ps2_command(&atkbd->ps2dev, NULL, ATKBD_CMD_RESET_BAT);
818 * atkbd_disconnect() closes and frees.
821 static void atkbd_disconnect(struct serio *serio)
823 struct atkbd *atkbd = serio_get_drvdata(serio);
825 atkbd_disable(atkbd);
827 /* make sure we don't have a command in flight */
828 cancel_delayed_work_sync(&atkbd->event_work);
830 sysfs_remove_group(&serio->dev.kobj, &atkbd_attribute_group);
831 input_unregister_device(atkbd->dev);
833 serio_set_drvdata(serio, NULL);
838 * generate release events for the keycodes given in data
840 static void atkbd_apply_forced_release_keylist(struct atkbd* atkbd,
843 const unsigned int *keys = data;
847 for (i = 0; keys[i] != -1U; i++)
848 __set_bit(keys[i], atkbd->force_release_mask);
852 * Most special keys (Fn+F?) on Dell laptops do not generate release
853 * events so we have to do it ourselves.
855 static unsigned int atkbd_dell_laptop_forced_release_keys[] = {
856 0x85, 0x86, 0x87, 0x88, 0x89, 0x8a, 0x8b, 0x8f, 0x93, -1U
860 * Perform fixup for HP system that doesn't generate release
861 * for its video switch
863 static unsigned int atkbd_hp_forced_release_keys[] = {
868 * Inventec system with broken key release on volume keys
870 static unsigned int atkbd_inventec_forced_release_keys[] = {
875 * Perform fixup for HP Pavilion ZV6100 laptop that doesn't generate release
876 * for its volume buttons
878 static unsigned int atkbd_hp_zv6100_forced_release_keys[] = {
883 * Samsung NC10,NC20 with Fn+F? key release not working
885 static unsigned int atkbd_samsung_forced_release_keys[] = {
886 0x82, 0x83, 0x84, 0x86, 0x88, 0x89, 0xb3, 0xf7, 0xf9, -1U
890 * The volume up and volume down special keys on a Fujitsu Amilo PA 1510 laptop
891 * do not generate release events so we have to do it ourselves.
893 static unsigned int atkbd_amilo_pa1510_forced_release_keys[] = {
898 * Amilo Pi 3525 key release for Fn+Volume keys not working
900 static unsigned int atkbd_amilo_pi3525_forced_release_keys[] = {
901 0x20, 0xa0, 0x2e, 0xae, 0x30, 0xb0, -1U
905 * Amilo Xi 3650 key release for light touch bar not working
907 static unsigned int atkbd_amilo_xi3650_forced_release_keys[] = {
908 0x67, 0xed, 0x90, 0xa2, 0x99, 0xa4, 0xae, 0xb0, -1U
912 * Soltech TA12 system with broken key release on volume keys and mute key
914 static unsigned int atkdb_soltech_ta12_forced_release_keys[] = {
915 0xa0, 0xae, 0xb0, -1U
919 * atkbd_set_keycode_table() initializes keyboard's keycode table
920 * according to the selected scancode set
923 static void atkbd_set_keycode_table(struct atkbd *atkbd)
925 unsigned int scancode;
928 memset(atkbd->keycode, 0, sizeof(atkbd->keycode));
929 bitmap_zero(atkbd->force_release_mask, 512);
931 if (atkbd->translated) {
932 for (i = 0; i < 128; i++) {
933 scancode = atkbd_unxlate_table[i];
934 atkbd->keycode[i] = atkbd_set2_keycode[scancode];
935 atkbd->keycode[i | 0x80] = atkbd_set2_keycode[scancode | 0x80];
937 for (j = 0; j < ARRAY_SIZE(atkbd_scroll_keys); j++)
938 if ((scancode | 0x80) == atkbd_scroll_keys[j].set2)
939 atkbd->keycode[i | 0x80] = atkbd_scroll_keys[j].keycode;
941 } else if (atkbd->set == 3) {
942 memcpy(atkbd->keycode, atkbd_set3_keycode, sizeof(atkbd->keycode));
944 memcpy(atkbd->keycode, atkbd_set2_keycode, sizeof(atkbd->keycode));
947 for (i = 0; i < ARRAY_SIZE(atkbd_scroll_keys); i++) {
948 scancode = atkbd_scroll_keys[i].set2;
949 atkbd->keycode[scancode] = atkbd_scroll_keys[i].keycode;
954 * HANGEUL and HANJA keys do not send release events so we need to
955 * generate such events ourselves
957 scancode = atkbd_compat_scancode(atkbd, ATKBD_RET_HANGEUL);
958 atkbd->keycode[scancode] = KEY_HANGEUL;
959 __set_bit(scancode, atkbd->force_release_mask);
961 scancode = atkbd_compat_scancode(atkbd, ATKBD_RET_HANJA);
962 atkbd->keycode[scancode] = KEY_HANJA;
963 __set_bit(scancode, atkbd->force_release_mask);
966 * Perform additional fixups
968 if (atkbd_platform_fixup)
969 atkbd_platform_fixup(atkbd, atkbd_platform_fixup_data);
973 * atkbd_set_device_attrs() sets up keyboard's input device structure
976 static void atkbd_set_device_attrs(struct atkbd *atkbd)
978 struct input_dev *input_dev = atkbd->dev;
982 snprintf(atkbd->name, sizeof(atkbd->name),
983 "AT Set 2 Extra keyboard");
985 snprintf(atkbd->name, sizeof(atkbd->name),
986 "AT %s Set %d keyboard",
987 atkbd->translated ? "Translated" : "Raw", atkbd->set);
989 snprintf(atkbd->phys, sizeof(atkbd->phys),
990 "%s/input0", atkbd->ps2dev.serio->phys);
992 input_dev->name = atkbd->name;
993 input_dev->phys = atkbd->phys;
994 input_dev->id.bustype = BUS_I8042;
995 input_dev->id.vendor = 0x0001;
996 input_dev->id.product = atkbd->translated ? 1 : atkbd->set;
997 input_dev->id.version = atkbd->id;
998 input_dev->event = atkbd_event;
999 input_dev->dev.parent = &atkbd->ps2dev.serio->dev;
1001 input_set_drvdata(input_dev, atkbd);
1003 input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP) |
1007 input_dev->evbit[0] |= BIT_MASK(EV_LED);
1008 input_dev->ledbit[0] = BIT_MASK(LED_NUML) |
1009 BIT_MASK(LED_CAPSL) | BIT_MASK(LED_SCROLLL);
1013 input_dev->ledbit[0] |= BIT_MASK(LED_COMPOSE) |
1014 BIT_MASK(LED_SUSPEND) | BIT_MASK(LED_SLEEP) |
1015 BIT_MASK(LED_MUTE) | BIT_MASK(LED_MISC);
1017 if (!atkbd->softrepeat) {
1018 input_dev->rep[REP_DELAY] = 250;
1019 input_dev->rep[REP_PERIOD] = 33;
1022 input_dev->mscbit[0] = atkbd->softraw ? BIT_MASK(MSC_SCAN) :
1023 BIT_MASK(MSC_RAW) | BIT_MASK(MSC_SCAN);
1025 if (atkbd->scroll) {
1026 input_dev->evbit[0] |= BIT_MASK(EV_REL);
1027 input_dev->relbit[0] = BIT_MASK(REL_WHEEL) |
1028 BIT_MASK(REL_HWHEEL);
1029 __set_bit(BTN_MIDDLE, input_dev->keybit);
1032 input_dev->keycode = atkbd->keycode;
1033 input_dev->keycodesize = sizeof(unsigned short);
1034 input_dev->keycodemax = ARRAY_SIZE(atkbd_set2_keycode);
1036 for (i = 0; i < 512; i++)
1037 if (atkbd->keycode[i] && atkbd->keycode[i] < ATKBD_SPECIAL)
1038 __set_bit(atkbd->keycode[i], input_dev->keybit);
1042 * atkbd_connect() is called when the serio module finds an interface
1043 * that isn't handled yet by an appropriate device driver. We check if
1044 * there is an AT keyboard out there and if yes, we register ourselves
1045 * to the input module.
1048 static int atkbd_connect(struct serio *serio, struct serio_driver *drv)
1050 struct atkbd *atkbd;
1051 struct input_dev *dev;
1054 atkbd = kzalloc(sizeof(struct atkbd), GFP_KERNEL);
1055 dev = input_allocate_device();
1060 ps2_init(&atkbd->ps2dev, serio);
1061 INIT_DELAYED_WORK(&atkbd->event_work, atkbd_event_work);
1062 mutex_init(&atkbd->event_mutex);
1064 switch (serio->id.type) {
1067 atkbd->translated = 1;
1074 atkbd->softraw = atkbd_softraw;
1075 atkbd->softrepeat = atkbd_softrepeat;
1076 atkbd->scroll = atkbd_scroll;
1078 if (atkbd->softrepeat)
1081 serio_set_drvdata(serio, atkbd);
1083 err = serio_open(serio, drv);
1089 if (atkbd_probe(atkbd)) {
1094 atkbd->set = atkbd_select_set(atkbd, atkbd_set, atkbd_extra);
1095 atkbd_activate(atkbd);
1102 atkbd_set_keycode_table(atkbd);
1103 atkbd_set_device_attrs(atkbd);
1105 err = sysfs_create_group(&serio->dev.kobj, &atkbd_attribute_group);
1109 atkbd_enable(atkbd);
1111 err = input_register_device(atkbd->dev);
1117 fail4: sysfs_remove_group(&serio->dev.kobj, &atkbd_attribute_group);
1118 fail3: serio_close(serio);
1119 fail2: serio_set_drvdata(serio, NULL);
1120 fail1: input_free_device(dev);
1126 * atkbd_reconnect() tries to restore keyboard into a sane state and is
1127 * most likely called on resume.
1130 static int atkbd_reconnect(struct serio *serio)
1132 struct atkbd *atkbd = serio_get_drvdata(serio);
1133 struct serio_driver *drv = serio->drv;
1135 if (!atkbd || !drv) {
1136 printk(KERN_DEBUG "atkbd: reconnect request, but serio is disconnected, ignoring...\n");
1140 atkbd_disable(atkbd);
1143 if (atkbd_probe(atkbd))
1145 if (atkbd->set != atkbd_select_set(atkbd, atkbd->set, atkbd->extra))
1148 atkbd_activate(atkbd);
1151 * Restore repeat rate and LEDs (that were reset by atkbd_activate)
1152 * to pre-resume state
1154 if (!atkbd->softrepeat)
1155 atkbd_set_repeat_rate(atkbd);
1156 atkbd_set_leds(atkbd);
1159 atkbd_enable(atkbd);
1164 static struct serio_device_id atkbd_serio_ids[] = {
1172 .type = SERIO_8042_XL,
1178 .type = SERIO_RS232,
1179 .proto = SERIO_PS2SER,
1186 MODULE_DEVICE_TABLE(serio, atkbd_serio_ids);
1188 static struct serio_driver atkbd_drv = {
1192 .description = DRIVER_DESC,
1193 .id_table = atkbd_serio_ids,
1194 .interrupt = atkbd_interrupt,
1195 .connect = atkbd_connect,
1196 .reconnect = atkbd_reconnect,
1197 .disconnect = atkbd_disconnect,
1198 .cleanup = atkbd_cleanup,
1201 static ssize_t atkbd_attr_show_helper(struct device *dev, char *buf,
1202 ssize_t (*handler)(struct atkbd *, char *))
1204 struct serio *serio = to_serio_port(dev);
1207 retval = serio_pin_driver(serio);
1211 if (serio->drv != &atkbd_drv) {
1216 retval = handler((struct atkbd *)serio_get_drvdata(serio), buf);
1219 serio_unpin_driver(serio);
1223 static ssize_t atkbd_attr_set_helper(struct device *dev, const char *buf, size_t count,
1224 ssize_t (*handler)(struct atkbd *, const char *, size_t))
1226 struct serio *serio = to_serio_port(dev);
1227 struct atkbd *atkbd;
1230 retval = serio_pin_driver(serio);
1234 if (serio->drv != &atkbd_drv) {
1239 atkbd = serio_get_drvdata(serio);
1240 atkbd_disable(atkbd);
1241 retval = handler(atkbd, buf, count);
1242 atkbd_enable(atkbd);
1245 serio_unpin_driver(serio);
1249 static ssize_t atkbd_show_extra(struct atkbd *atkbd, char *buf)
1251 return sprintf(buf, "%d\n", atkbd->extra ? 1 : 0);
1254 static ssize_t atkbd_set_extra(struct atkbd *atkbd, const char *buf, size_t count)
1256 struct input_dev *old_dev, *new_dev;
1257 unsigned long value;
1259 unsigned char old_extra, old_set;
1264 if (strict_strtoul(buf, 10, &value) || value > 1)
1267 if (atkbd->extra != value) {
1269 * Since device's properties will change we need to
1270 * unregister old device. But allocate and register
1271 * new one first to make sure we have it.
1273 old_dev = atkbd->dev;
1274 old_extra = atkbd->extra;
1275 old_set = atkbd->set;
1277 new_dev = input_allocate_device();
1281 atkbd->dev = new_dev;
1282 atkbd->set = atkbd_select_set(atkbd, atkbd->set, value);
1283 atkbd_activate(atkbd);
1284 atkbd_set_keycode_table(atkbd);
1285 atkbd_set_device_attrs(atkbd);
1287 err = input_register_device(atkbd->dev);
1289 input_free_device(new_dev);
1291 atkbd->dev = old_dev;
1292 atkbd->set = atkbd_select_set(atkbd, old_set, old_extra);
1293 atkbd_set_keycode_table(atkbd);
1294 atkbd_set_device_attrs(atkbd);
1298 input_unregister_device(old_dev);
1304 static ssize_t atkbd_show_scroll(struct atkbd *atkbd, char *buf)
1306 return sprintf(buf, "%d\n", atkbd->scroll ? 1 : 0);
1309 static ssize_t atkbd_set_scroll(struct atkbd *atkbd, const char *buf, size_t count)
1311 struct input_dev *old_dev, *new_dev;
1312 unsigned long value;
1314 unsigned char old_scroll;
1316 if (strict_strtoul(buf, 10, &value) || value > 1)
1319 if (atkbd->scroll != value) {
1320 old_dev = atkbd->dev;
1321 old_scroll = atkbd->scroll;
1323 new_dev = input_allocate_device();
1327 atkbd->dev = new_dev;
1328 atkbd->scroll = value;
1329 atkbd_set_keycode_table(atkbd);
1330 atkbd_set_device_attrs(atkbd);
1332 err = input_register_device(atkbd->dev);
1334 input_free_device(new_dev);
1336 atkbd->scroll = old_scroll;
1337 atkbd->dev = old_dev;
1338 atkbd_set_keycode_table(atkbd);
1339 atkbd_set_device_attrs(atkbd);
1343 input_unregister_device(old_dev);
1348 static ssize_t atkbd_show_set(struct atkbd *atkbd, char *buf)
1350 return sprintf(buf, "%d\n", atkbd->set);
1353 static ssize_t atkbd_set_set(struct atkbd *atkbd, const char *buf, size_t count)
1355 struct input_dev *old_dev, *new_dev;
1356 unsigned long value;
1358 unsigned char old_set, old_extra;
1363 if (strict_strtoul(buf, 10, &value) || (value != 2 && value != 3))
1366 if (atkbd->set != value) {
1367 old_dev = atkbd->dev;
1368 old_extra = atkbd->extra;
1369 old_set = atkbd->set;
1371 new_dev = input_allocate_device();
1375 atkbd->dev = new_dev;
1376 atkbd->set = atkbd_select_set(atkbd, value, atkbd->extra);
1377 atkbd_activate(atkbd);
1378 atkbd_set_keycode_table(atkbd);
1379 atkbd_set_device_attrs(atkbd);
1381 err = input_register_device(atkbd->dev);
1383 input_free_device(new_dev);
1385 atkbd->dev = old_dev;
1386 atkbd->set = atkbd_select_set(atkbd, old_set, old_extra);
1387 atkbd_set_keycode_table(atkbd);
1388 atkbd_set_device_attrs(atkbd);
1392 input_unregister_device(old_dev);
1397 static ssize_t atkbd_show_softrepeat(struct atkbd *atkbd, char *buf)
1399 return sprintf(buf, "%d\n", atkbd->softrepeat ? 1 : 0);
1402 static ssize_t atkbd_set_softrepeat(struct atkbd *atkbd, const char *buf, size_t count)
1404 struct input_dev *old_dev, *new_dev;
1405 unsigned long value;
1407 unsigned char old_softrepeat, old_softraw;
1412 if (strict_strtoul(buf, 10, &value) || value > 1)
1415 if (atkbd->softrepeat != value) {
1416 old_dev = atkbd->dev;
1417 old_softrepeat = atkbd->softrepeat;
1418 old_softraw = atkbd->softraw;
1420 new_dev = input_allocate_device();
1424 atkbd->dev = new_dev;
1425 atkbd->softrepeat = value;
1426 if (atkbd->softrepeat)
1428 atkbd_set_device_attrs(atkbd);
1430 err = input_register_device(atkbd->dev);
1432 input_free_device(new_dev);
1434 atkbd->dev = old_dev;
1435 atkbd->softrepeat = old_softrepeat;
1436 atkbd->softraw = old_softraw;
1437 atkbd_set_device_attrs(atkbd);
1441 input_unregister_device(old_dev);
1447 static ssize_t atkbd_show_softraw(struct atkbd *atkbd, char *buf)
1449 return sprintf(buf, "%d\n", atkbd->softraw ? 1 : 0);
1452 static ssize_t atkbd_set_softraw(struct atkbd *atkbd, const char *buf, size_t count)
1454 struct input_dev *old_dev, *new_dev;
1455 unsigned long value;
1457 unsigned char old_softraw;
1459 if (strict_strtoul(buf, 10, &value) || value > 1)
1462 if (atkbd->softraw != value) {
1463 old_dev = atkbd->dev;
1464 old_softraw = atkbd->softraw;
1466 new_dev = input_allocate_device();
1470 atkbd->dev = new_dev;
1471 atkbd->softraw = value;
1472 atkbd_set_device_attrs(atkbd);
1474 err = input_register_device(atkbd->dev);
1476 input_free_device(new_dev);
1478 atkbd->dev = old_dev;
1479 atkbd->softraw = old_softraw;
1480 atkbd_set_device_attrs(atkbd);
1484 input_unregister_device(old_dev);
1489 static ssize_t atkbd_show_err_count(struct atkbd *atkbd, char *buf)
1491 return sprintf(buf, "%lu\n", atkbd->err_count);
1494 static int __init atkbd_setup_forced_release(const struct dmi_system_id *id)
1496 atkbd_platform_fixup = atkbd_apply_forced_release_keylist;
1497 atkbd_platform_fixup_data = id->driver_data;
1502 static struct dmi_system_id atkbd_dmi_quirk_table[] __initdata = {
1504 .ident = "Dell Laptop",
1506 DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
1507 DMI_MATCH(DMI_CHASSIS_TYPE, "8"), /* Portable */
1509 .callback = atkbd_setup_forced_release,
1510 .driver_data = atkbd_dell_laptop_forced_release_keys,
1513 .ident = "Dell Laptop",
1515 DMI_MATCH(DMI_SYS_VENDOR, "Dell Computer Corporation"),
1516 DMI_MATCH(DMI_CHASSIS_TYPE, "8"), /* Portable */
1518 .callback = atkbd_setup_forced_release,
1519 .driver_data = atkbd_dell_laptop_forced_release_keys,
1524 DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
1525 DMI_MATCH(DMI_PRODUCT_NAME, "HP 2133"),
1527 .callback = atkbd_setup_forced_release,
1528 .driver_data = atkbd_hp_forced_release_keys,
1531 .ident = "HP Pavilion ZV6100",
1533 DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
1534 DMI_MATCH(DMI_PRODUCT_NAME, "Pavilion ZV6100"),
1536 .callback = atkbd_setup_forced_release,
1537 .driver_data = atkbd_hp_zv6100_forced_release_keys,
1540 .ident = "Inventec Symphony",
1542 DMI_MATCH(DMI_SYS_VENDOR, "INVENTEC"),
1543 DMI_MATCH(DMI_PRODUCT_NAME, "SYMPHONY 6.0/7.0"),
1545 .callback = atkbd_setup_forced_release,
1546 .driver_data = atkbd_inventec_forced_release_keys,
1549 .ident = "Samsung NC10",
1551 DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
1552 DMI_MATCH(DMI_PRODUCT_NAME, "NC10"),
1554 .callback = atkbd_setup_forced_release,
1555 .driver_data = atkbd_samsung_forced_release_keys,
1558 .ident = "Samsung NC20",
1560 DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
1561 DMI_MATCH(DMI_PRODUCT_NAME, "NC20"),
1563 .callback = atkbd_setup_forced_release,
1564 .driver_data = atkbd_samsung_forced_release_keys,
1567 .ident = "Samsung SQ45S70S",
1569 DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
1570 DMI_MATCH(DMI_PRODUCT_NAME, "SQ45S70S"),
1572 .callback = atkbd_setup_forced_release,
1573 .driver_data = atkbd_samsung_forced_release_keys,
1576 .ident = "Fujitsu Amilo PA 1510",
1578 DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
1579 DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Pa 1510"),
1581 .callback = atkbd_setup_forced_release,
1582 .driver_data = atkbd_amilo_pa1510_forced_release_keys,
1585 .ident = "Fujitsu Amilo Pi 3525",
1587 DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
1588 DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Pi 3525"),
1590 .callback = atkbd_setup_forced_release,
1591 .driver_data = atkbd_amilo_pi3525_forced_release_keys,
1594 .ident = "Fujitsu Amilo Xi 3650",
1596 DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
1597 DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Xi 3650"),
1599 .callback = atkbd_setup_forced_release,
1600 .driver_data = atkbd_amilo_xi3650_forced_release_keys,
1603 .ident = "Soltech Corporation TA12",
1605 DMI_MATCH(DMI_SYS_VENDOR, "Soltech Corporation"),
1606 DMI_MATCH(DMI_PRODUCT_NAME, "TA12"),
1608 .callback = atkbd_setup_forced_release,
1609 .driver_data = atkdb_soltech_ta12_forced_release_keys,
1614 static int __init atkbd_init(void)
1616 dmi_check_system(atkbd_dmi_quirk_table);
1618 return serio_register_driver(&atkbd_drv);
1621 static void __exit atkbd_exit(void)
1623 serio_unregister_driver(&atkbd_drv);
1626 module_init(atkbd_init);
1627 module_exit(atkbd_exit);