2 # Touchscreen driver configuration
4 menuconfig INPUT_TOUCHSCREEN
7 Say Y here, and a list of supported touchscreens will be displayed.
8 This option doesn't affect the kernel.
14 config TOUCHSCREEN_88PM860X
15 tristate "Marvell 88PM860x touchscreen"
16 depends on MFD_88PM860X
18 Say Y here if you have a 88PM860x PMIC and want to enable
19 support for the built-in touchscreen.
23 To compile this driver as a module, choose M here: the
24 module will be called 88pm860x-ts.
26 config TOUCHSCREEN_ADS7846
27 tristate "ADS7846/TSC2046/AD7873 and AD(S)7843 based touchscreens"
29 depends on HWMON = n || HWMON
31 Say Y here if you have a touchscreen interface using the
32 ADS7846/TSC2046/AD7873 or ADS7843/AD7843 controller,
33 and your board-specific setup code includes that in its
36 If HWMON is selected, and the driver is told the reference voltage
37 on your board, you will also get hwmon interfaces for the voltage
38 (and on ads7846/tsc2046/ad7873, temperature) sensors of this chip.
40 If unsure, say N (but it's safe to say "Y").
42 To compile this driver as a module, choose M here: the
43 module will be called ads7846.
45 config TOUCHSCREEN_AD7877
46 tristate "AD7877 based touchscreens"
49 Say Y here if you have a touchscreen interface using the
50 AD7877 controller, and your board-specific initialization
51 code includes that in its table of SPI devices.
53 If unsure, say N (but it's safe to say "Y").
55 To compile this driver as a module, choose M here: the
56 module will be called ad7877.
58 config TOUCHSCREEN_AD7879
59 tristate "Analog Devices AD7879-1/AD7889-1 touchscreen interface"
61 Say Y here if you want to support a touchscreen interface using
62 the AD7879-1/AD7889-1 controller.
64 You should select a bus connection too.
66 To compile this driver as a module, choose M here: the
67 module will be called ad7879.
69 config TOUCHSCREEN_AD7879_I2C
70 tristate "support I2C bus connection"
71 depends on TOUCHSCREEN_AD7879 && I2C
73 Say Y here if you have AD7879-1/AD7889-1 hooked to an I2C bus.
75 To compile this driver as a module, choose M here: the
76 module will be called ad7879-i2c.
78 config TOUCHSCREEN_AD7879_SPI
79 tristate "support SPI bus connection"
80 depends on TOUCHSCREEN_AD7879 && SPI_MASTER
82 Say Y here if you have AD7879-1/AD7889-1 hooked to a SPI bus.
84 If unsure, say N (but it's safe to say "Y").
86 To compile this driver as a module, choose M here: the
87 module will be called ad7879-spi.
89 config TOUCHSCREEN_ATMEL_MXT
90 tristate "Atmel mXT I2C Touchscreen"
93 Say Y here if you have Atmel mXT series I2C touchscreen,
94 such as AT42QT602240/ATMXT224, connected to your system.
98 To compile this driver as a module, choose M here: the
99 module will be called atmel_mxt_ts.
101 config TOUCHSCREEN_AUO_PIXCIR
102 tristate "AUO in-cell touchscreen using Pixcir ICs"
106 Say Y here if you have a AUO display with in-cell touchscreen
111 To compile this driver as a module, choose M here: the
112 module will be called auo-pixcir-ts.
114 config TOUCHSCREEN_BU21013
115 tristate "BU21013 based touch panel controllers"
118 Say Y here if you have a bu21013 touchscreen connected to
123 To compile this driver as a module, choose M here: the
124 module will be called bu21013_ts.
126 config TOUCHSCREEN_CY8CTMG110
127 tristate "cy8ctmg110 touchscreen"
131 Say Y here if you have a cy8ctmg110 capacitive touchscreen on
136 To compile this driver as a module, choose M here: the
137 module will be called cy8ctmg110_ts.
139 config TOUCHSCREEN_CYTTSP_CORE
140 tristate "Cypress TTSP touchscreen"
142 Say Y here if you have a touchscreen using controller from
143 the Cypress TrueTouch(tm) Standard Product family connected
144 to your system. You will also need to select appropriate
145 bus connection below.
149 To compile this driver as a module, choose M here: the
150 module will be called cyttsp_core.
152 config TOUCHSCREEN_CYTTSP_I2C
153 tristate "support I2C bus connection"
154 depends on TOUCHSCREEN_CYTTSP_CORE && I2C
156 Say Y here if the touchscreen is connected via I2C bus.
158 To compile this driver as a module, choose M here: the
159 module will be called cyttsp_i2c.
161 config TOUCHSCREEN_CYTTSP_SPI
162 tristate "support SPI bus connection"
163 depends on TOUCHSCREEN_CYTTSP_CORE && SPI_MASTER
165 Say Y here if the touchscreen is connected via SPI bus.
167 To compile this driver as a module, choose M here: the
168 module will be called cyttsp_spi.
170 config TOUCHSCREEN_CYTTSP4_CORE
171 tristate "Cypress TrueTouch Gen4 Touchscreen Driver"
173 Core driver for Cypress TrueTouch(tm) Standard Product
174 Generation4 touchscreen controllers.
176 Say Y here if you have a Cypress Gen4 touchscreen.
180 To compile this driver as a module, choose M here.
182 config TOUCHSCREEN_CYTTSP4_I2C
183 tristate "support I2C bus connection"
184 depends on TOUCHSCREEN_CYTTSP4_CORE && I2C
186 Say Y here if the touchscreen is connected via I2C bus.
188 To compile this driver as a module, choose M here: the
189 module will be called cyttsp4_i2c.
191 config TOUCHSCREEN_CYTTSP4_SPI
192 tristate "support SPI bus connection"
193 depends on TOUCHSCREEN_CYTTSP4_CORE && SPI_MASTER
195 Say Y here if the touchscreen is connected via SPI bus.
197 To compile this driver as a module, choose M here: the
198 module will be called cyttsp4_spi.
200 config TOUCHSCREEN_DA9034
201 tristate "Touchscreen support for Dialog Semiconductor DA9034"
202 depends on PMIC_DA903X
205 Say Y here to enable the support for the touchscreen found
206 on Dialog Semiconductor DA9034 PMIC.
210 To compile this driver as a module, choose M here: the
211 module will be called da9034-ts.
213 config TOUCHSCREEN_DA9052
214 tristate "Dialog DA9052/DA9053 TSI"
215 depends on PMIC_DA9052
217 Say Y here to support the touchscreen found on Dialog Semiconductor
218 DA9052-BC and DA9053-AA/Bx PMICs.
222 To compile this driver as a module, choose M here: the
223 module will be called da9052_tsi.
225 config TOUCHSCREEN_DYNAPRO
226 tristate "Dynapro serial touchscreen"
229 Say Y here if you have a Dynapro serial touchscreen connected to
234 To compile this driver as a module, choose M here: the
235 module will be called dynapro.
237 config TOUCHSCREEN_HAMPSHIRE
238 tristate "Hampshire serial touchscreen"
241 Say Y here if you have a Hampshire serial touchscreen connected to
246 To compile this driver as a module, choose M here: the
247 module will be called hampshire.
249 config TOUCHSCREEN_EETI
250 tristate "EETI touchscreen panel support"
253 Say Y here to enable support for I2C connected EETI touch panels.
255 To compile this driver as a module, choose M here: the
256 module will be called eeti_ts.
258 config TOUCHSCREEN_EGALAX
259 tristate "EETI eGalax multi-touch panel support"
262 Say Y here to enable support for I2C connected EETI
263 eGalax multi-touch panels.
265 To compile this driver as a module, choose M here: the
266 module will be called egalax_ts.
268 config TOUCHSCREEN_FUJITSU
269 tristate "Fujitsu serial touchscreen"
272 Say Y here if you have the Fujitsu touchscreen (such as one
273 installed in Lifebook P series laptop) connected to your
278 To compile this driver as a module, choose M here: the
279 module will be called fujitsu-ts.
281 config TOUCHSCREEN_ILI210X
282 tristate "Ilitek ILI210X based touchscreen"
285 Say Y here if you have a ILI210X based touchscreen
286 controller. This driver supports models ILI2102,
287 ILI2102s, ILI2103, ILI2103s and ILI2105.
288 Such kind of chipsets can be found in Amazon Kindle Fire
293 To compile this driver as a module, choose M here: the
294 module will be called ili210x.
296 config TOUCHSCREEN_S3C2410
297 tristate "Samsung S3C2410/generic touchscreen input driver"
298 depends on ARCH_S3C24XX || SAMSUNG_DEV_TS
301 Say Y here if you have the s3c2410 touchscreen.
305 To compile this driver as a module, choose M here: the
306 module will be called s3c2410_ts.
308 config TOUCHSCREEN_GUNZE
309 tristate "Gunze AHL-51S touchscreen"
312 Say Y here if you have the Gunze AHL-51 touchscreen connected to
317 To compile this driver as a module, choose M here: the
318 module will be called gunze.
320 config TOUCHSCREEN_ELO
321 tristate "Elo serial touchscreens"
324 Say Y here if you have an Elo serial touchscreen connected to
329 To compile this driver as a module, choose M here: the
330 module will be called elo.
332 config TOUCHSCREEN_WACOM_W8001
333 tristate "Wacom W8001 penabled serial touchscreen"
336 Say Y here if you have an Wacom W8001 penabled serial touchscreen
337 connected to your system.
341 To compile this driver as a module, choose M here: the
342 module will be called wacom_w8001.
344 config TOUCHSCREEN_WACOM_I2C
345 tristate "Wacom Tablet support (I2C)"
348 Say Y here if you want to use the I2C version of the Wacom
353 To compile this driver as a module, choose M here: the module
354 will be called wacom_i2c.
356 config TOUCHSCREEN_LPC32XX
357 tristate "LPC32XX touchscreen controller"
358 depends on ARCH_LPC32XX
360 Say Y here if you have a LPC32XX device and want
361 to support the built-in touchscreen.
363 To compile this driver as a module, choose M here: the
364 module will be called lpc32xx_ts.
366 config TOUCHSCREEN_MAX11801
367 tristate "MAX11801 based touchscreens"
370 Say Y here if you have a MAX11801 based touchscreen
375 To compile this driver as a module, choose M here: the
376 module will be called max11801_ts.
378 config TOUCHSCREEN_MCS5000
379 tristate "MELFAS MCS-5000 touchscreen"
382 Say Y here if you have the MELFAS MCS-5000 touchscreen controller
387 To compile this driver as a module, choose M here: the
388 module will be called mcs5000_ts.
390 config TOUCHSCREEN_MMS114
391 tristate "MELFAS MMS114 touchscreen"
394 Say Y here if you have the MELFAS MMS114 touchscreen controller
399 To compile this driver as a module, choose M here: the
400 module will be called mms114.
402 config TOUCHSCREEN_MTOUCH
403 tristate "MicroTouch serial touchscreens"
406 Say Y here if you have a MicroTouch (3M) serial touchscreen connected to
411 To compile this driver as a module, choose M here: the
412 module will be called mtouch.
414 config TOUCHSCREEN_INEXIO
415 tristate "iNexio serial touchscreens"
418 Say Y here if you have an iNexio serial touchscreen connected to
423 To compile this driver as a module, choose M here: the
424 module will be called inexio.
426 config TOUCHSCREEN_INTEL_MID
427 tristate "Intel MID platform resistive touchscreen"
428 depends on INTEL_SCU_IPC
430 Say Y here if you have a Intel MID based touchscreen in
435 To compile this driver as a module, choose M here: the
436 module will be called intel_mid_touch.
438 config TOUCHSCREEN_MK712
439 tristate "ICS MicroClock MK712 touchscreen"
441 Say Y here if you have the ICS MicroClock MK712 touchscreen
442 controller chip in your system.
446 To compile this driver as a module, choose M here: the
447 module will be called mk712.
449 config TOUCHSCREEN_HP600
450 tristate "HP Jornada 6xx touchscreen"
451 depends on SH_HP6XX && SH_ADC
453 Say Y here if you have a HP Jornada 620/660/680/690 and want to
454 support the built-in touchscreen.
456 To compile this driver as a module, choose M here: the
457 module will be called hp680_ts_input.
459 config TOUCHSCREEN_HP7XX
460 tristate "HP Jornada 7xx touchscreen"
461 depends on SA1100_JORNADA720_SSP
463 Say Y here if you have a HP Jornada 710/720/728 and want
464 to support the built-in touchscreen.
466 To compile this driver as a module, choose M here: the
467 module will be called jornada720_ts.
469 config TOUCHSCREEN_HTCPEN
470 tristate "HTC Shift X9500 touchscreen"
473 Say Y here if you have an HTC Shift UMPC also known as HTC X9500
474 Clio / Shangrila and want to support the built-in touchscreen.
478 To compile this driver as a module, choose M here: the
479 module will be called htcpen.
481 config TOUCHSCREEN_PENMOUNT
482 tristate "Penmount serial touchscreen"
485 Say Y here if you have a Penmount serial touchscreen connected to
490 To compile this driver as a module, choose M here: the
491 module will be called penmount.
493 config TOUCHSCREEN_EDT_FT5X06
494 tristate "EDT FocalTech FT5x06 I2C Touchscreen support"
497 Say Y here if you have an EDT "Polytouch" touchscreen based
498 on the FocalTech FT5x06 family of controllers connected to
503 To compile this driver as a module, choose M here: the
504 module will be called edt-ft5x06.
506 config TOUCHSCREEN_MIGOR
507 tristate "Renesas MIGO-R touchscreen"
508 depends on SH_MIGOR && I2C
510 Say Y here to enable MIGO-R touchscreen support.
514 To compile this driver as a module, choose M here: the
515 module will be called migor_ts.
517 config TOUCHSCREEN_TOUCHRIGHT
518 tristate "Touchright serial touchscreen"
521 Say Y here if you have a Touchright serial touchscreen connected to
526 To compile this driver as a module, choose M here: the
527 module will be called touchright.
529 config TOUCHSCREEN_TOUCHWIN
530 tristate "Touchwin serial touchscreen"
533 Say Y here if you have a Touchwin serial touchscreen connected to
538 To compile this driver as a module, choose M here: the
539 module will be called touchwin.
541 config TOUCHSCREEN_TI_AM335X_TSC
542 tristate "TI Touchscreen Interface"
543 depends on MFD_TI_AM335X_TSCADC
545 Say Y here if you have 4/5/8 wire touchscreen controller
546 to be connected to the ADC controller on your TI AM335x SoC.
550 To compile this driver as a module, choose M here: the
551 module will be called ti_am335x_tsc.
553 config TOUCHSCREEN_UCB1400
554 tristate "Philips UCB1400 touchscreen"
556 depends on UCB1400_CORE
558 This enables support for the Philips UCB1400 touchscreen interface.
559 The UCB1400 is an AC97 audio codec. The touchscreen interface
560 will be initialized only after the ALSA subsystem has been
561 brought up and the UCB1400 detected. You therefore have to
562 configure ALSA support as well (either built-in or modular,
563 independently of whether this driver is itself built-in or
564 modular) for this driver to work.
566 To compile this driver as a module, choose M here: the
567 module will be called ucb1400_ts.
569 config TOUCHSCREEN_PIXCIR
570 tristate "PIXCIR I2C touchscreens"
573 Say Y here if you have a pixcir i2c touchscreen
578 To compile this driver as a module, choose M here: the
579 module will be called pixcir_i2c_ts.
581 config TOUCHSCREEN_WM831X
582 tristate "Support for WM831x touchscreen controllers"
583 depends on MFD_WM831X
585 This enables support for the touchscreen controller on the WM831x
588 To compile this driver as a module, choose M here: the
589 module will be called wm831x-ts.
591 config TOUCHSCREEN_WM97XX
592 tristate "Support for WM97xx AC97 touchscreen controllers"
595 Say Y here if you have a Wolfson Microelectronics WM97xx
596 touchscreen connected to your system. Note that this option
597 only enables core driver, you will also need to select
598 support for appropriate chip below.
602 To compile this driver as a module, choose M here: the
603 module will be called wm97xx-ts.
605 config TOUCHSCREEN_WM9705
606 bool "WM9705 Touchscreen interface support"
607 depends on TOUCHSCREEN_WM97XX
610 Say Y here to enable support for the Wolfson Microelectronics
611 WM9705 touchscreen controller.
613 config TOUCHSCREEN_WM9712
614 bool "WM9712 Touchscreen interface support"
615 depends on TOUCHSCREEN_WM97XX
618 Say Y here to enable support for the Wolfson Microelectronics
619 WM9712 touchscreen controller.
621 config TOUCHSCREEN_WM9713
622 bool "WM9713 Touchscreen interface support"
623 depends on TOUCHSCREEN_WM97XX
626 Say Y here to enable support for the Wolfson Microelectronics
627 WM9713 touchscreen controller.
629 config TOUCHSCREEN_WM97XX_ATMEL
630 tristate "WM97xx Atmel accelerated touch"
631 depends on TOUCHSCREEN_WM97XX && AVR32
633 Say Y here for support for streaming mode with WM97xx touchscreens
634 on Atmel AT91 or AVR32 systems with an AC97C module.
636 Be aware that this will use channel B in the controller for
637 streaming data, this must not conflict with other AC97C drivers.
641 To compile this driver as a module, choose M here: the module will
642 be called atmel-wm97xx.
644 config TOUCHSCREEN_WM97XX_MAINSTONE
645 tristate "WM97xx Mainstone/Palm accelerated touch"
646 depends on TOUCHSCREEN_WM97XX && ARCH_PXA
648 Say Y here for support for streaming mode with WM97xx touchscreens
649 on Mainstone, Palm Tungsten T5, TX and LifeDrive systems.
653 To compile this driver as a module, choose M here: the
654 module will be called mainstone-wm97xx.
656 config TOUCHSCREEN_WM97XX_ZYLONITE
657 tristate "Zylonite accelerated touch"
658 depends on TOUCHSCREEN_WM97XX && MACH_ZYLONITE
659 select TOUCHSCREEN_WM9713
661 Say Y here for support for streaming mode with the touchscreen
666 To compile this driver as a module, choose M here: the
667 module will be called zylonite-wm97xx.
669 config TOUCHSCREEN_USB_COMPOSITE
670 tristate "USB Touchscreen Driver"
671 depends on USB_ARCH_HAS_HCD
674 USB Touchscreen driver for:
675 - eGalax Touchkit USB (also includes eTurboTouch CT-410/510/700)
676 - PanJit TouchSet USB
677 - 3M MicroTouch USB (EX II series)
679 - some other eTurboTouch
682 - IRTOUCHSYSTEMS/UNITOP
684 - GoTop Super_Q2/GogoPen/PenPower tablets
685 - JASTEC USB Touch Controller/DigiTech DTR-02U
686 - Zytronic controllers
687 - Elo TouchSystems 2700 IntelliTouch
688 - EasyTouch USB Touch Controller from Data Modul
689 - e2i (Mimo monitors)
691 Have a look at <http://linux.chapter7.ch/touchkit/> for
692 a usage description and the required user-space stuff.
694 To compile this driver as a module, choose M here: the
695 module will be called usbtouchscreen.
697 config TOUCHSCREEN_MC13783
698 tristate "Freescale MC13783 touchscreen input driver"
699 depends on MFD_MC13XXX
701 Say Y here if you have an Freescale MC13783 PMIC on your
702 board and want to use its touchscreen
706 To compile this driver as a module, choose M here: the
707 module will be called mc13783_ts.
709 config TOUCHSCREEN_USB_EGALAX
711 bool "eGalax, eTurboTouch CT-410/510/700 device support" if EXPERT
712 depends on TOUCHSCREEN_USB_COMPOSITE
714 config TOUCHSCREEN_USB_PANJIT
716 bool "PanJit device support" if EXPERT
717 depends on TOUCHSCREEN_USB_COMPOSITE
719 config TOUCHSCREEN_USB_3M
721 bool "3M/Microtouch EX II series device support" if EXPERT
722 depends on TOUCHSCREEN_USB_COMPOSITE
724 config TOUCHSCREEN_USB_ITM
726 bool "ITM device support" if EXPERT
727 depends on TOUCHSCREEN_USB_COMPOSITE
729 config TOUCHSCREEN_USB_ETURBO
731 bool "eTurboTouch (non-eGalax compatible) device support" if EXPERT
732 depends on TOUCHSCREEN_USB_COMPOSITE
734 config TOUCHSCREEN_USB_GUNZE
736 bool "Gunze AHL61 device support" if EXPERT
737 depends on TOUCHSCREEN_USB_COMPOSITE
739 config TOUCHSCREEN_USB_DMC_TSC10
741 bool "DMC TSC-10/25 device support" if EXPERT
742 depends on TOUCHSCREEN_USB_COMPOSITE
744 config TOUCHSCREEN_USB_IRTOUCH
746 bool "IRTOUCHSYSTEMS/UNITOP device support" if EXPERT
747 depends on TOUCHSCREEN_USB_COMPOSITE
749 config TOUCHSCREEN_USB_IDEALTEK
751 bool "IdealTEK URTC1000 device support" if EXPERT
752 depends on TOUCHSCREEN_USB_COMPOSITE
754 config TOUCHSCREEN_USB_GENERAL_TOUCH
756 bool "GeneralTouch Touchscreen device support" if EXPERT
757 depends on TOUCHSCREEN_USB_COMPOSITE
759 config TOUCHSCREEN_USB_GOTOP
761 bool "GoTop Super_Q2/GogoPen/PenPower tablet device support" if EXPERT
762 depends on TOUCHSCREEN_USB_COMPOSITE
764 config TOUCHSCREEN_USB_JASTEC
766 bool "JASTEC/DigiTech DTR-02U USB touch controller device support" if EXPERT
767 depends on TOUCHSCREEN_USB_COMPOSITE
769 config TOUCHSCREEN_USB_ELO
771 bool "Elo TouchSystems 2700 IntelliTouch controller device support" if EXPERT
772 depends on TOUCHSCREEN_USB_COMPOSITE
774 config TOUCHSCREEN_USB_E2I
776 bool "e2i Touchscreen controller (e.g. from Mimo 740)" if EXPERT
777 depends on TOUCHSCREEN_USB_COMPOSITE
779 config TOUCHSCREEN_USB_ZYTRONIC
781 bool "Zytronic controller" if EXPERT
782 depends on TOUCHSCREEN_USB_COMPOSITE
784 config TOUCHSCREEN_USB_ETT_TC45USB
786 bool "ET&T USB series TC4UM/TC5UH touchscreen controller support" if EXPERT
787 depends on TOUCHSCREEN_USB_COMPOSITE
789 config TOUCHSCREEN_USB_NEXIO
791 bool "NEXIO/iNexio device support" if EXPERT
792 depends on TOUCHSCREEN_USB_COMPOSITE
794 config TOUCHSCREEN_USB_EASYTOUCH
796 bool "EasyTouch USB Touch controller device support" if EMBEDDED
797 depends on TOUCHSCREEN_USB_COMPOSITE
799 Say Y here if you have an EasyTouch USB Touch controller.
802 config TOUCHSCREEN_TOUCHIT213
803 tristate "Sahara TouchIT-213 touchscreen"
806 Say Y here if you have a Sahara TouchIT-213 Tablet PC.
810 To compile this driver as a module, choose M here: the
811 module will be called touchit213.
813 config TOUCHSCREEN_TSC_SERIO
814 tristate "TSC-10/25/40 serial touchscreen support"
817 Say Y here if you have a TSC-10, 25 or 40 serial touchscreen connected
822 To compile this driver as a module, choose M here: the
823 module will be called tsc40.
825 config TOUCHSCREEN_TSC2005
826 tristate "TSC2005 based touchscreens"
827 depends on SPI_MASTER
829 Say Y here if you have a TSC2005 based touchscreen.
833 To compile this driver as a module, choose M here: the
834 module will be called tsc2005.
836 config TOUCHSCREEN_TSC2007
837 tristate "TSC2007 based touchscreens"
840 Say Y here if you have a TSC2007 based touchscreen.
844 To compile this driver as a module, choose M here: the
845 module will be called tsc2007.
847 config TOUCHSCREEN_W90X900
848 tristate "W90P910 touchscreen driver"
851 Say Y here if you have a W90P910 based touchscreen.
853 To compile this driver as a module, choose M here: the
854 module will be called w90p910_ts.
856 config TOUCHSCREEN_PCAP
857 tristate "Motorola PCAP touchscreen"
860 Say Y here if you have a Motorola EZX telephone and
861 want to enable support for the built-in touchscreen.
863 To compile this driver as a module, choose M here: the
864 module will be called pcap_ts.
866 config TOUCHSCREEN_ST1232
867 tristate "Sitronix ST1232 touchscreen controllers"
870 Say Y here if you want to support Sitronix ST1232
871 touchscreen controller.
875 To compile this driver as a module, choose M here: the
876 module will be called st1232_ts.
878 config TOUCHSCREEN_STMPE
879 tristate "STMicroelectronics STMPE touchscreens"
882 Say Y here if you want support for STMicroelectronics
883 STMPE touchscreen controllers.
885 To compile this driver as a module, choose M here: the
886 module will be called stmpe-ts.
888 config TOUCHSCREEN_SUR40
889 tristate "Samsung SUR40 (Surface 2.0/PixelSense) touchscreen"
893 Say Y here if you want support for the Samsung SUR40 touchscreen
894 (also known as Microsoft Surface 2.0 or Microsoft PixelSense).
896 To compile this driver as a module, choose M here: the
897 module will be called sur40.
899 config TOUCHSCREEN_TPS6507X
900 tristate "TPS6507x based touchscreens"
904 Say Y here if you have a TPS6507x based touchscreen
909 To compile this driver as a module, choose M here: the
910 module will be called tps6507x_ts.
912 config TOUCHSCREEN_ZFORCE
913 tristate "Neonode zForce infrared touchscreens"
917 Say Y here if you have a touchscreen using the zforce
918 infraread technology from Neonode.
922 To compile this driver as a module, choose M here: the
923 module will be called zforce_ts.