2 # Touchscreen driver configuration
4 menuconfig INPUT_TOUCHSCREEN
7 Say Y here, and a list of supported touchscreens will be displayed.
8 This option doesn't affect the kernel.
14 config TOUCHSCREEN_PROPERTIES
18 config TOUCHSCREEN_88PM860X
19 tristate "Marvell 88PM860x touchscreen"
20 depends on MFD_88PM860X
22 Say Y here if you have a 88PM860x PMIC and want to enable
23 support for the built-in touchscreen.
27 To compile this driver as a module, choose M here: the
28 module will be called 88pm860x-ts.
30 config TOUCHSCREEN_ADS7846
31 tristate "ADS7846/TSC2046/AD7873 and AD(S)7843 based touchscreens"
33 depends on HWMON = n || HWMON
35 Say Y here if you have a touchscreen interface using the
36 ADS7846/TSC2046/AD7873 or ADS7843/AD7843 controller,
37 and your board-specific setup code includes that in its
40 If HWMON is selected, and the driver is told the reference voltage
41 on your board, you will also get hwmon interfaces for the voltage
42 (and on ads7846/tsc2046/ad7873, temperature) sensors of this chip.
44 If unsure, say N (but it's safe to say "Y").
46 To compile this driver as a module, choose M here: the
47 module will be called ads7846.
49 config TOUCHSCREEN_AD7877
50 tristate "AD7877 based touchscreens"
53 Say Y here if you have a touchscreen interface using the
54 AD7877 controller, and your board-specific initialization
55 code includes that in its table of SPI devices.
57 If unsure, say N (but it's safe to say "Y").
59 To compile this driver as a module, choose M here: the
60 module will be called ad7877.
62 config TOUCHSCREEN_AD7879
63 tristate "Analog Devices AD7879-1/AD7889-1 touchscreen interface"
65 Say Y here if you want to support a touchscreen interface using
66 the AD7879-1/AD7889-1 controller.
68 You should select a bus connection too.
70 To compile this driver as a module, choose M here: the
71 module will be called ad7879.
73 config TOUCHSCREEN_AD7879_I2C
74 tristate "support I2C bus connection"
75 depends on TOUCHSCREEN_AD7879 && I2C
77 Say Y here if you have AD7879-1/AD7889-1 hooked to an I2C bus.
79 To compile this driver as a module, choose M here: the
80 module will be called ad7879-i2c.
82 config TOUCHSCREEN_AD7879_SPI
83 tristate "support SPI bus connection"
84 depends on TOUCHSCREEN_AD7879 && SPI_MASTER
86 Say Y here if you have AD7879-1/AD7889-1 hooked to a SPI bus.
88 If unsure, say N (but it's safe to say "Y").
90 To compile this driver as a module, choose M here: the
91 module will be called ad7879-spi.
93 config TOUCHSCREEN_AR1021_I2C
94 tristate "Microchip AR1021 i2c touchscreen"
97 Say Y here if you have the Microchip AR1021 touchscreen controller
102 To compile this driver as a module, choose M here: the
103 module will be called ar1021_i2c.
105 config TOUCHSCREEN_ATMEL_MXT
106 tristate "Atmel mXT I2C Touchscreen"
110 Say Y here if you have Atmel mXT series I2C touchscreen,
111 such as AT42QT602240/ATMXT224, connected to your system.
115 To compile this driver as a module, choose M here: the
116 module will be called atmel_mxt_ts.
118 config TOUCHSCREEN_AUO_PIXCIR
119 tristate "AUO in-cell touchscreen using Pixcir ICs"
121 depends on GPIOLIB || COMPILE_TEST
123 Say Y here if you have a AUO display with in-cell touchscreen
128 To compile this driver as a module, choose M here: the
129 module will be called auo-pixcir-ts.
131 config TOUCHSCREEN_BU21013
132 tristate "BU21013 based touch panel controllers"
135 Say Y here if you have a bu21013 touchscreen connected to
140 To compile this driver as a module, choose M here: the
141 module will be called bu21013_ts.
143 config TOUCHSCREEN_CHIPONE_ICN8318
144 tristate "chipone icn8318 touchscreen controller"
145 depends on GPIOLIB || COMPILE_TEST
149 Say Y here if you have a ChipOne icn8318 based I2C touchscreen.
153 To compile this driver as a module, choose M here: the
154 module will be called chipone_icn8318.
156 config TOUCHSCREEN_CY8CTMG110
157 tristate "cy8ctmg110 touchscreen"
159 depends on GPIOLIB || COMPILE_TEST
161 Say Y here if you have a cy8ctmg110 capacitive touchscreen on
166 To compile this driver as a module, choose M here: the
167 module will be called cy8ctmg110_ts.
169 config TOUCHSCREEN_CYTTSP_CORE
170 tristate "Cypress TTSP touchscreen"
172 Say Y here if you have a touchscreen using controller from
173 the Cypress TrueTouch(tm) Standard Product family connected
174 to your system. You will also need to select appropriate
175 bus connection below.
179 To compile this driver as a module, choose M here: the
180 module will be called cyttsp_core.
182 config TOUCHSCREEN_CYTTSP_I2C
183 tristate "support I2C bus connection"
184 depends on TOUCHSCREEN_CYTTSP_CORE && I2C
186 Say Y here if the touchscreen is connected via I2C bus.
188 To compile this driver as a module, choose M here: the
189 module will be called cyttsp_i2c.
191 config TOUCHSCREEN_CYTTSP_SPI
192 tristate "support SPI bus connection"
193 depends on TOUCHSCREEN_CYTTSP_CORE && SPI_MASTER
195 Say Y here if the touchscreen is connected via SPI bus.
197 To compile this driver as a module, choose M here: the
198 module will be called cyttsp_spi.
200 config TOUCHSCREEN_CYTTSP4_CORE
201 tristate "Cypress TrueTouch Gen4 Touchscreen Driver"
203 Core driver for Cypress TrueTouch(tm) Standard Product
204 Generation4 touchscreen controllers.
206 Say Y here if you have a Cypress Gen4 touchscreen.
210 To compile this driver as a module, choose M here.
212 config TOUCHSCREEN_CYTTSP4_I2C
213 tristate "support I2C bus connection"
214 depends on TOUCHSCREEN_CYTTSP4_CORE && I2C
216 Say Y here if the touchscreen is connected via I2C bus.
218 To compile this driver as a module, choose M here: the
219 module will be called cyttsp4_i2c.
221 config TOUCHSCREEN_CYTTSP4_SPI
222 tristate "support SPI bus connection"
223 depends on TOUCHSCREEN_CYTTSP4_CORE && SPI_MASTER
225 Say Y here if the touchscreen is connected via SPI bus.
227 To compile this driver as a module, choose M here: the
228 module will be called cyttsp4_spi.
230 config TOUCHSCREEN_DA9034
231 tristate "Touchscreen support for Dialog Semiconductor DA9034"
232 depends on PMIC_DA903X
235 Say Y here to enable the support for the touchscreen found
236 on Dialog Semiconductor DA9034 PMIC.
240 To compile this driver as a module, choose M here: the
241 module will be called da9034-ts.
243 config TOUCHSCREEN_DA9052
244 tristate "Dialog DA9052/DA9053 TSI"
245 depends on PMIC_DA9052
247 Say Y here to support the touchscreen found on Dialog Semiconductor
248 DA9052-BC and DA9053-AA/Bx PMICs.
252 To compile this driver as a module, choose M here: the
253 module will be called da9052_tsi.
255 config TOUCHSCREEN_DYNAPRO
256 tristate "Dynapro serial touchscreen"
259 Say Y here if you have a Dynapro serial touchscreen connected to
264 To compile this driver as a module, choose M here: the
265 module will be called dynapro.
267 config TOUCHSCREEN_HAMPSHIRE
268 tristate "Hampshire serial touchscreen"
271 Say Y here if you have a Hampshire serial touchscreen connected to
276 To compile this driver as a module, choose M here: the
277 module will be called hampshire.
279 config TOUCHSCREEN_EETI
280 tristate "EETI touchscreen panel support"
283 Say Y here to enable support for I2C connected EETI touch panels.
285 To compile this driver as a module, choose M here: the
286 module will be called eeti_ts.
288 config TOUCHSCREEN_EGALAX
289 tristate "EETI eGalax multi-touch panel support"
292 Say Y here to enable support for I2C connected EETI
293 eGalax multi-touch panels.
295 To compile this driver as a module, choose M here: the
296 module will be called egalax_ts.
298 config TOUCHSCREEN_FUJITSU
299 tristate "Fujitsu serial touchscreen"
302 Say Y here if you have the Fujitsu touchscreen (such as one
303 installed in Lifebook P series laptop) connected to your
308 To compile this driver as a module, choose M here: the
309 module will be called fujitsu-ts.
311 config TOUCHSCREEN_GOODIX
312 tristate "Goodix I2C touchscreen"
315 Say Y here if you have the Goodix touchscreen (such as one
316 installed in Onda v975w tablets) connected to your
317 system. It also supports 5-finger chip models, which can be
318 found on ARM tablets, like Wexler TAB7200 and MSI Primo73.
322 To compile this driver as a module, choose M here: the
323 module will be called goodix.
325 config TOUCHSCREEN_ILI210X
326 tristate "Ilitek ILI210X based touchscreen"
329 Say Y here if you have a ILI210X based touchscreen
330 controller. This driver supports models ILI2102,
331 ILI2102s, ILI2103, ILI2103s and ILI2105.
332 Such kind of chipsets can be found in Amazon Kindle Fire
337 To compile this driver as a module, choose M here: the
338 module will be called ili210x.
340 config TOUCHSCREEN_IPROC
341 tristate "IPROC touch panel driver support"
342 depends on ARCH_BCM_IPROC || COMPILE_TEST
344 Say Y here if you want to add support for the IPROC touch
345 controller to your system.
349 To compile this driver as a module, choose M here: the
350 module will be called bcm_iproc_tsc.
352 config TOUCHSCREEN_S3C2410
353 tristate "Samsung S3C2410/generic touchscreen input driver"
354 depends on ARCH_S3C24XX || SAMSUNG_DEV_TS
357 Say Y here if you have the s3c2410 touchscreen.
361 To compile this driver as a module, choose M here: the
362 module will be called s3c2410_ts.
364 config TOUCHSCREEN_GUNZE
365 tristate "Gunze AHL-51S touchscreen"
368 Say Y here if you have the Gunze AHL-51 touchscreen connected to
373 To compile this driver as a module, choose M here: the
374 module will be called gunze.
376 config TOUCHSCREEN_ELAN
377 tristate "Elan eKTH I2C touchscreen"
380 Say Y here if you have an Elan eKTH I2C touchscreen
381 connected to your system.
385 To compile this driver as a module, choose M here: the
386 module will be called elants_i2c.
388 config TOUCHSCREEN_ELO
389 tristate "Elo serial touchscreens"
392 Say Y here if you have an Elo serial touchscreen connected to
397 To compile this driver as a module, choose M here: the
398 module will be called elo.
400 config TOUCHSCREEN_WACOM_W8001
401 tristate "Wacom W8001 penabled serial touchscreen"
404 Say Y here if you have an Wacom W8001 penabled serial touchscreen
405 connected to your system.
409 To compile this driver as a module, choose M here: the
410 module will be called wacom_w8001.
412 config TOUCHSCREEN_WACOM_I2C
413 tristate "Wacom Tablet support (I2C)"
416 Say Y here if you want to use the I2C version of the Wacom
421 To compile this driver as a module, choose M here: the module
422 will be called wacom_i2c.
424 config TOUCHSCREEN_LPC32XX
425 tristate "LPC32XX touchscreen controller"
426 depends on ARCH_LPC32XX
428 Say Y here if you have a LPC32XX device and want
429 to support the built-in touchscreen.
431 To compile this driver as a module, choose M here: the
432 module will be called lpc32xx_ts.
434 config TOUCHSCREEN_MAX11801
435 tristate "MAX11801 based touchscreens"
438 Say Y here if you have a MAX11801 based touchscreen
443 To compile this driver as a module, choose M here: the
444 module will be called max11801_ts.
446 config TOUCHSCREEN_MCS5000
447 tristate "MELFAS MCS-5000 touchscreen"
450 Say Y here if you have the MELFAS MCS-5000 touchscreen controller
455 To compile this driver as a module, choose M here: the
456 module will be called mcs5000_ts.
458 config TOUCHSCREEN_MMS114
459 tristate "MELFAS MMS114 touchscreen"
462 Say Y here if you have the MELFAS MMS114 touchscreen controller
467 To compile this driver as a module, choose M here: the
468 module will be called mms114.
470 config TOUCHSCREEN_MTOUCH
471 tristate "MicroTouch serial touchscreens"
474 Say Y here if you have a MicroTouch (3M) serial touchscreen connected to
479 To compile this driver as a module, choose M here: the
480 module will be called mtouch.
482 config TOUCHSCREEN_INEXIO
483 tristate "iNexio serial touchscreens"
486 Say Y here if you have an iNexio serial touchscreen connected to
491 To compile this driver as a module, choose M here: the
492 module will be called inexio.
494 config TOUCHSCREEN_INTEL_MID
495 tristate "Intel MID platform resistive touchscreen"
496 depends on INTEL_SCU_IPC
498 Say Y here if you have a Intel MID based touchscreen in
503 To compile this driver as a module, choose M here: the
504 module will be called intel_mid_touch.
506 config TOUCHSCREEN_MK712
507 tristate "ICS MicroClock MK712 touchscreen"
509 Say Y here if you have the ICS MicroClock MK712 touchscreen
510 controller chip in your system.
514 To compile this driver as a module, choose M here: the
515 module will be called mk712.
517 config TOUCHSCREEN_HP600
518 tristate "HP Jornada 6xx touchscreen"
519 depends on SH_HP6XX && SH_ADC
521 Say Y here if you have a HP Jornada 620/660/680/690 and want to
522 support the built-in touchscreen.
524 To compile this driver as a module, choose M here: the
525 module will be called hp680_ts_input.
527 config TOUCHSCREEN_HP7XX
528 tristate "HP Jornada 7xx touchscreen"
529 depends on SA1100_JORNADA720_SSP
531 Say Y here if you have a HP Jornada 710/720/728 and want
532 to support the built-in touchscreen.
534 To compile this driver as a module, choose M here: the
535 module will be called jornada720_ts.
537 config TOUCHSCREEN_IPAQ_MICRO
538 tristate "HP iPAQ Atmel Micro ASIC touchscreen"
539 depends on MFD_IPAQ_MICRO
541 Say Y here to enable support for the touchscreen attached to
542 the Atmel Micro peripheral controller on iPAQ h3100/h3600/h3700
546 To compile this driver as a module, choose M here: the
547 module will be called ipaq-micro-ts.
549 config TOUCHSCREEN_HTCPEN
550 tristate "HTC Shift X9500 touchscreen"
553 Say Y here if you have an HTC Shift UMPC also known as HTC X9500
554 Clio / Shangrila and want to support the built-in touchscreen.
558 To compile this driver as a module, choose M here: the
559 module will be called htcpen.
561 config TOUCHSCREEN_PENMOUNT
562 tristate "Penmount serial touchscreen"
565 Say Y here if you have a Penmount serial touchscreen connected to
570 To compile this driver as a module, choose M here: the
571 module will be called penmount.
573 config TOUCHSCREEN_EDT_FT5X06
574 tristate "EDT FocalTech FT5x06 I2C Touchscreen support"
577 Say Y here if you have an EDT "Polytouch" touchscreen based
578 on the FocalTech FT5x06 family of controllers connected to
583 To compile this driver as a module, choose M here: the
584 module will be called edt-ft5x06.
586 config TOUCHSCREEN_MIGOR
587 tristate "Renesas MIGO-R touchscreen"
588 depends on SH_MIGOR && I2C
590 Say Y here to enable MIGO-R touchscreen support.
594 To compile this driver as a module, choose M here: the
595 module will be called migor_ts.
597 config TOUCHSCREEN_TOUCHRIGHT
598 tristate "Touchright serial touchscreen"
601 Say Y here if you have a Touchright serial touchscreen connected to
606 To compile this driver as a module, choose M here: the
607 module will be called touchright.
609 config TOUCHSCREEN_TOUCHWIN
610 tristate "Touchwin serial touchscreen"
613 Say Y here if you have a Touchwin serial touchscreen connected to
618 To compile this driver as a module, choose M here: the
619 module will be called touchwin.
621 config TOUCHSCREEN_TI_AM335X_TSC
622 tristate "TI Touchscreen Interface"
623 depends on MFD_TI_AM335X_TSCADC
625 Say Y here if you have 4/5/8 wire touchscreen controller
626 to be connected to the ADC controller on your TI AM335x SoC.
630 To compile this driver as a module, choose M here: the
631 module will be called ti_am335x_tsc.
633 config TOUCHSCREEN_UCB1400
634 tristate "Philips UCB1400 touchscreen"
636 depends on UCB1400_CORE
638 This enables support for the Philips UCB1400 touchscreen interface.
639 The UCB1400 is an AC97 audio codec. The touchscreen interface
640 will be initialized only after the ALSA subsystem has been
641 brought up and the UCB1400 detected. You therefore have to
642 configure ALSA support as well (either built-in or modular,
643 independently of whether this driver is itself built-in or
644 modular) for this driver to work.
646 To compile this driver as a module, choose M here: the
647 module will be called ucb1400_ts.
649 config TOUCHSCREEN_PIXCIR
650 tristate "PIXCIR I2C touchscreens"
653 Say Y here if you have a pixcir i2c touchscreen
658 To compile this driver as a module, choose M here: the
659 module will be called pixcir_i2c_ts.
661 config TOUCHSCREEN_WDT87XX_I2C
662 tristate "Weida HiTech I2C touchscreen"
665 Say Y here if you have a Weida WDT87XX I2C touchscreen
666 connected to your system.
670 To compile this driver as a module, choose M here: the
671 module will be called wdt87xx_i2c.
673 config TOUCHSCREEN_WM831X
674 tristate "Support for WM831x touchscreen controllers"
675 depends on MFD_WM831X
677 This enables support for the touchscreen controller on the WM831x
680 To compile this driver as a module, choose M here: the
681 module will be called wm831x-ts.
683 config TOUCHSCREEN_WM97XX
684 tristate "Support for WM97xx AC97 touchscreen controllers"
687 Say Y here if you have a Wolfson Microelectronics WM97xx
688 touchscreen connected to your system. Note that this option
689 only enables core driver, you will also need to select
690 support for appropriate chip below.
694 To compile this driver as a module, choose M here: the
695 module will be called wm97xx-ts.
697 config TOUCHSCREEN_WM9705
698 bool "WM9705 Touchscreen interface support"
699 depends on TOUCHSCREEN_WM97XX
702 Say Y here to enable support for the Wolfson Microelectronics
703 WM9705 touchscreen controller.
705 config TOUCHSCREEN_WM9712
706 bool "WM9712 Touchscreen interface support"
707 depends on TOUCHSCREEN_WM97XX
710 Say Y here to enable support for the Wolfson Microelectronics
711 WM9712 touchscreen controller.
713 config TOUCHSCREEN_WM9713
714 bool "WM9713 Touchscreen interface support"
715 depends on TOUCHSCREEN_WM97XX
718 Say Y here to enable support for the Wolfson Microelectronics
719 WM9713 touchscreen controller.
721 config TOUCHSCREEN_WM97XX_ATMEL
722 tristate "WM97xx Atmel accelerated touch"
723 depends on TOUCHSCREEN_WM97XX && AVR32
725 Say Y here for support for streaming mode with WM97xx touchscreens
726 on Atmel AT91 or AVR32 systems with an AC97C module.
728 Be aware that this will use channel B in the controller for
729 streaming data, this must not conflict with other AC97C drivers.
733 To compile this driver as a module, choose M here: the module will
734 be called atmel-wm97xx.
736 config TOUCHSCREEN_WM97XX_MAINSTONE
737 tristate "WM97xx Mainstone/Palm accelerated touch"
738 depends on TOUCHSCREEN_WM97XX && ARCH_PXA
740 Say Y here for support for streaming mode with WM97xx touchscreens
741 on Mainstone, Palm Tungsten T5, TX and LifeDrive systems.
745 To compile this driver as a module, choose M here: the
746 module will be called mainstone-wm97xx.
748 config TOUCHSCREEN_WM97XX_ZYLONITE
749 tristate "Zylonite accelerated touch"
750 depends on TOUCHSCREEN_WM97XX && MACH_ZYLONITE
751 select TOUCHSCREEN_WM9713
753 Say Y here for support for streaming mode with the touchscreen
758 To compile this driver as a module, choose M here: the
759 module will be called zylonite-wm97xx.
761 config TOUCHSCREEN_USB_COMPOSITE
762 tristate "USB Touchscreen Driver"
763 depends on USB_ARCH_HAS_HCD
766 USB Touchscreen driver for:
767 - eGalax Touchkit USB (also includes eTurboTouch CT-410/510/700)
768 - PanJit TouchSet USB
769 - 3M MicroTouch USB (EX II series)
771 - some other eTurboTouch
774 - IRTOUCHSYSTEMS/UNITOP
776 - GoTop Super_Q2/GogoPen/PenPower tablets
777 - JASTEC USB Touch Controller/DigiTech DTR-02U
778 - Zytronic controllers
779 - Elo TouchSystems 2700 IntelliTouch
780 - EasyTouch USB Touch Controller from Data Modul
781 - e2i (Mimo monitors)
783 Have a look at <http://linux.chapter7.ch/touchkit/> for
784 a usage description and the required user-space stuff.
786 To compile this driver as a module, choose M here: the
787 module will be called usbtouchscreen.
789 config TOUCHSCREEN_MC13783
790 tristate "Freescale MC13783 touchscreen input driver"
791 depends on MFD_MC13XXX
793 Say Y here if you have an Freescale MC13783 PMIC on your
794 board and want to use its touchscreen
798 To compile this driver as a module, choose M here: the
799 module will be called mc13783_ts.
801 config TOUCHSCREEN_USB_EGALAX
803 bool "eGalax, eTurboTouch CT-410/510/700 device support" if EXPERT
804 depends on TOUCHSCREEN_USB_COMPOSITE
806 config TOUCHSCREEN_USB_PANJIT
808 bool "PanJit device support" if EXPERT
809 depends on TOUCHSCREEN_USB_COMPOSITE
811 config TOUCHSCREEN_USB_3M
813 bool "3M/Microtouch EX II series device support" if EXPERT
814 depends on TOUCHSCREEN_USB_COMPOSITE
816 config TOUCHSCREEN_USB_ITM
818 bool "ITM device support" if EXPERT
819 depends on TOUCHSCREEN_USB_COMPOSITE
821 config TOUCHSCREEN_USB_ETURBO
823 bool "eTurboTouch (non-eGalax compatible) device support" if EXPERT
824 depends on TOUCHSCREEN_USB_COMPOSITE
826 config TOUCHSCREEN_USB_GUNZE
828 bool "Gunze AHL61 device support" if EXPERT
829 depends on TOUCHSCREEN_USB_COMPOSITE
831 config TOUCHSCREEN_USB_DMC_TSC10
833 bool "DMC TSC-10/25 device support" if EXPERT
834 depends on TOUCHSCREEN_USB_COMPOSITE
836 config TOUCHSCREEN_USB_IRTOUCH
838 bool "IRTOUCHSYSTEMS/UNITOP device support" if EXPERT
839 depends on TOUCHSCREEN_USB_COMPOSITE
841 config TOUCHSCREEN_USB_IDEALTEK
843 bool "IdealTEK URTC1000 device support" if EXPERT
844 depends on TOUCHSCREEN_USB_COMPOSITE
846 config TOUCHSCREEN_USB_GENERAL_TOUCH
848 bool "GeneralTouch Touchscreen device support" if EXPERT
849 depends on TOUCHSCREEN_USB_COMPOSITE
851 config TOUCHSCREEN_USB_GOTOP
853 bool "GoTop Super_Q2/GogoPen/PenPower tablet device support" if EXPERT
854 depends on TOUCHSCREEN_USB_COMPOSITE
856 config TOUCHSCREEN_USB_JASTEC
858 bool "JASTEC/DigiTech DTR-02U USB touch controller device support" if EXPERT
859 depends on TOUCHSCREEN_USB_COMPOSITE
861 config TOUCHSCREEN_USB_ELO
863 bool "Elo TouchSystems 2700 IntelliTouch controller device support" if EXPERT
864 depends on TOUCHSCREEN_USB_COMPOSITE
866 config TOUCHSCREEN_USB_E2I
868 bool "e2i Touchscreen controller (e.g. from Mimo 740)" if EXPERT
869 depends on TOUCHSCREEN_USB_COMPOSITE
871 config TOUCHSCREEN_USB_ZYTRONIC
873 bool "Zytronic controller" if EXPERT
874 depends on TOUCHSCREEN_USB_COMPOSITE
876 config TOUCHSCREEN_USB_ETT_TC45USB
878 bool "ET&T USB series TC4UM/TC5UH touchscreen controller support" if EXPERT
879 depends on TOUCHSCREEN_USB_COMPOSITE
881 config TOUCHSCREEN_USB_NEXIO
883 bool "NEXIO/iNexio device support" if EXPERT
884 depends on TOUCHSCREEN_USB_COMPOSITE
886 config TOUCHSCREEN_USB_EASYTOUCH
888 bool "EasyTouch USB Touch controller device support" if EMBEDDED
889 depends on TOUCHSCREEN_USB_COMPOSITE
891 Say Y here if you have an EasyTouch USB Touch controller.
894 config TOUCHSCREEN_TOUCHIT213
895 tristate "Sahara TouchIT-213 touchscreen"
898 Say Y here if you have a Sahara TouchIT-213 Tablet PC.
902 To compile this driver as a module, choose M here: the
903 module will be called touchit213.
905 config TOUCHSCREEN_TSC_SERIO
906 tristate "TSC-10/25/40 serial touchscreen support"
909 Say Y here if you have a TSC-10, 25 or 40 serial touchscreen connected
914 To compile this driver as a module, choose M here: the
915 module will be called tsc40.
917 config TOUCHSCREEN_TSC2005
918 tristate "TSC2005 based touchscreens"
919 depends on SPI_MASTER
922 Say Y here if you have a TSC2005 based touchscreen.
926 To compile this driver as a module, choose M here: the
927 module will be called tsc2005.
929 config TOUCHSCREEN_TSC2007
930 tristate "TSC2007 based touchscreens"
933 Say Y here if you have a TSC2007 based touchscreen.
937 To compile this driver as a module, choose M here: the
938 module will be called tsc2007.
940 config TOUCHSCREEN_W90X900
941 tristate "W90P910 touchscreen driver"
942 depends on ARCH_W90X900
944 Say Y here if you have a W90P910 based touchscreen.
946 To compile this driver as a module, choose M here: the
947 module will be called w90p910_ts.
949 config TOUCHSCREEN_PCAP
950 tristate "Motorola PCAP touchscreen"
953 Say Y here if you have a Motorola EZX telephone and
954 want to enable support for the built-in touchscreen.
956 To compile this driver as a module, choose M here: the
957 module will be called pcap_ts.
959 config TOUCHSCREEN_ST1232
960 tristate "Sitronix ST1232 touchscreen controllers"
963 Say Y here if you want to support Sitronix ST1232
964 touchscreen controller.
968 To compile this driver as a module, choose M here: the
969 module will be called st1232_ts.
971 config TOUCHSCREEN_STMPE
972 tristate "STMicroelectronics STMPE touchscreens"
974 depends on (OF || COMPILE_TEST)
976 Say Y here if you want support for STMicroelectronics
977 STMPE touchscreen controllers.
979 To compile this driver as a module, choose M here: the
980 module will be called stmpe-ts.
982 config TOUCHSCREEN_SUN4I
983 tristate "Allwinner sun4i resistive touchscreen controller support"
984 depends on ARCH_SUNXI || COMPILE_TEST
986 depends on THERMAL || !THERMAL_OF
988 This selects support for the resistive touchscreen controller
989 found on Allwinner sunxi SoCs.
991 To compile this driver as a module, choose M here: the
992 module will be called sun4i-ts.
994 config TOUCHSCREEN_SUR40
995 tristate "Samsung SUR40 (Surface 2.0/PixelSense) touchscreen"
996 depends on USB && MEDIA_USB_SUPPORT && HAS_DMA
998 select VIDEOBUF2_DMA_SG
1000 Say Y here if you want support for the Samsung SUR40 touchscreen
1001 (also known as Microsoft Surface 2.0 or Microsoft PixelSense).
1003 To compile this driver as a module, choose M here: the
1004 module will be called sur40.
1006 config TOUCHSCREEN_SX8654
1007 tristate "Semtech SX8654 touchscreen"
1010 Say Y here if you have a Semtech SX8654 touchscreen controller.
1014 To compile this driver as a module, choose M here: the
1015 module will be called sx8654.
1017 config TOUCHSCREEN_TPS6507X
1018 tristate "TPS6507x based touchscreens"
1020 select INPUT_POLLDEV
1022 Say Y here if you have a TPS6507x based touchscreen
1027 To compile this driver as a module, choose M here: the
1028 module will be called tps6507x_ts.
1030 config TOUCHSCREEN_ZFORCE
1031 tristate "Neonode zForce infrared touchscreens"
1033 depends on GPIOLIB || COMPILE_TEST
1035 Say Y here if you have a touchscreen using the zforce
1036 infraread technology from Neonode.
1040 To compile this driver as a module, choose M here: the
1041 module will be called zforce_ts.
1043 config TOUCHSCREEN_COLIBRI_VF50
1044 tristate "Toradex Colibri on board touchscreen driver"
1045 depends on GPIOLIB && IIO && VF610_ADC
1047 Say Y here if you have a Colibri VF50 and plan to use
1048 the on-board provided 4-wire touchscreen driver.
1052 To compile this driver as a module, choose M here: the
1053 module will be called colibri_vf50_ts.