2 # Touchscreen driver configuration
4 menuconfig INPUT_TOUCHSCREEN
7 Say Y here, and a list of supported touchscreens will be displayed.
8 This option doesn't affect the kernel.
14 config TOUCHSCREEN_PROPERTIES
18 config TOUCHSCREEN_88PM860X
19 tristate "Marvell 88PM860x touchscreen"
20 depends on MFD_88PM860X
22 Say Y here if you have a 88PM860x PMIC and want to enable
23 support for the built-in touchscreen.
27 To compile this driver as a module, choose M here: the
28 module will be called 88pm860x-ts.
30 config TOUCHSCREEN_ADS7846
31 tristate "ADS7846/TSC2046/AD7873 and AD(S)7843 based touchscreens"
33 depends on HWMON = n || HWMON
35 Say Y here if you have a touchscreen interface using the
36 ADS7846/TSC2046/AD7873 or ADS7843/AD7843 controller,
37 and your board-specific setup code includes that in its
40 If HWMON is selected, and the driver is told the reference voltage
41 on your board, you will also get hwmon interfaces for the voltage
42 (and on ads7846/tsc2046/ad7873, temperature) sensors of this chip.
44 If unsure, say N (but it's safe to say "Y").
46 To compile this driver as a module, choose M here: the
47 module will be called ads7846.
49 config TOUCHSCREEN_AD7877
50 tristate "AD7877 based touchscreens"
53 Say Y here if you have a touchscreen interface using the
54 AD7877 controller, and your board-specific initialization
55 code includes that in its table of SPI devices.
57 If unsure, say N (but it's safe to say "Y").
59 To compile this driver as a module, choose M here: the
60 module will be called ad7877.
62 config TOUCHSCREEN_AD7879
63 tristate "Analog Devices AD7879-1/AD7889-1 touchscreen interface"
65 Say Y here if you want to support a touchscreen interface using
66 the AD7879-1/AD7889-1 controller.
68 You should select a bus connection too.
70 To compile this driver as a module, choose M here: the
71 module will be called ad7879.
73 config TOUCHSCREEN_AD7879_I2C
74 tristate "support I2C bus connection"
75 depends on TOUCHSCREEN_AD7879 && I2C
77 Say Y here if you have AD7879-1/AD7889-1 hooked to an I2C bus.
79 To compile this driver as a module, choose M here: the
80 module will be called ad7879-i2c.
82 config TOUCHSCREEN_AD7879_SPI
83 tristate "support SPI bus connection"
84 depends on TOUCHSCREEN_AD7879 && SPI_MASTER
86 Say Y here if you have AD7879-1/AD7889-1 hooked to a SPI bus.
88 If unsure, say N (but it's safe to say "Y").
90 To compile this driver as a module, choose M here: the
91 module will be called ad7879-spi.
93 config TOUCHSCREEN_AR1021_I2C
94 tristate "Microchip AR1021 i2c touchscreen"
97 Say Y here if you have the Microchip AR1021 touchscreen controller
102 To compile this driver as a module, choose M here: the
103 module will be called ar1021_i2c.
105 config TOUCHSCREEN_ATMEL_MXT
106 tristate "Atmel mXT I2C Touchscreen"
110 Say Y here if you have Atmel mXT series I2C touchscreen,
111 such as AT42QT602240/ATMXT224, connected to your system.
115 To compile this driver as a module, choose M here: the
116 module will be called atmel_mxt_ts.
118 config TOUCHSCREEN_AUO_PIXCIR
119 tristate "AUO in-cell touchscreen using Pixcir ICs"
121 depends on GPIOLIB || COMPILE_TEST
123 Say Y here if you have a AUO display with in-cell touchscreen
128 To compile this driver as a module, choose M here: the
129 module will be called auo-pixcir-ts.
131 config TOUCHSCREEN_BU21013
132 tristate "BU21013 based touch panel controllers"
135 Say Y here if you have a bu21013 touchscreen connected to
140 To compile this driver as a module, choose M here: the
141 module will be called bu21013_ts.
143 config TOUCHSCREEN_CHIPONE_ICN8318
144 tristate "chipone icn8318 touchscreen controller"
145 depends on GPIOLIB || COMPILE_TEST
149 Say Y here if you have a ChipOne icn8318 based I2C touchscreen.
153 To compile this driver as a module, choose M here: the
154 module will be called chipone_icn8318.
156 config TOUCHSCREEN_CY8CTMG110
157 tristate "cy8ctmg110 touchscreen"
159 depends on GPIOLIB || COMPILE_TEST
161 Say Y here if you have a cy8ctmg110 capacitive touchscreen on
166 To compile this driver as a module, choose M here: the
167 module will be called cy8ctmg110_ts.
169 config TOUCHSCREEN_CYTTSP_CORE
170 tristate "Cypress TTSP touchscreen"
172 Say Y here if you have a touchscreen using controller from
173 the Cypress TrueTouch(tm) Standard Product family connected
174 to your system. You will also need to select appropriate
175 bus connection below.
179 To compile this driver as a module, choose M here: the
180 module will be called cyttsp_core.
182 config TOUCHSCREEN_CYTTSP_I2C
183 tristate "support I2C bus connection"
184 depends on TOUCHSCREEN_CYTTSP_CORE && I2C
186 Say Y here if the touchscreen is connected via I2C bus.
188 To compile this driver as a module, choose M here: the
189 module will be called cyttsp_i2c.
191 config TOUCHSCREEN_CYTTSP_SPI
192 tristate "support SPI bus connection"
193 depends on TOUCHSCREEN_CYTTSP_CORE && SPI_MASTER
195 Say Y here if the touchscreen is connected via SPI bus.
197 To compile this driver as a module, choose M here: the
198 module will be called cyttsp_spi.
200 config TOUCHSCREEN_CYTTSP4_CORE
201 tristate "Cypress TrueTouch Gen4 Touchscreen Driver"
203 Core driver for Cypress TrueTouch(tm) Standard Product
204 Generation4 touchscreen controllers.
206 Say Y here if you have a Cypress Gen4 touchscreen.
210 To compile this driver as a module, choose M here.
212 config TOUCHSCREEN_CYTTSP4_I2C
213 tristate "support I2C bus connection"
214 depends on TOUCHSCREEN_CYTTSP4_CORE && I2C
216 Say Y here if the touchscreen is connected via I2C bus.
218 To compile this driver as a module, choose M here: the
219 module will be called cyttsp4_i2c.
221 config TOUCHSCREEN_CYTTSP4_SPI
222 tristate "support SPI bus connection"
223 depends on TOUCHSCREEN_CYTTSP4_CORE && SPI_MASTER
225 Say Y here if the touchscreen is connected via SPI bus.
227 To compile this driver as a module, choose M here: the
228 module will be called cyttsp4_spi.
230 config TOUCHSCREEN_DA9034
231 tristate "Touchscreen support for Dialog Semiconductor DA9034"
232 depends on PMIC_DA903X
235 Say Y here to enable the support for the touchscreen found
236 on Dialog Semiconductor DA9034 PMIC.
240 To compile this driver as a module, choose M here: the
241 module will be called da9034-ts.
243 config TOUCHSCREEN_DA9052
244 tristate "Dialog DA9052/DA9053 TSI"
245 depends on PMIC_DA9052
247 Say Y here to support the touchscreen found on Dialog Semiconductor
248 DA9052-BC and DA9053-AA/Bx PMICs.
252 To compile this driver as a module, choose M here: the
253 module will be called da9052_tsi.
255 config TOUCHSCREEN_DYNAPRO
256 tristate "Dynapro serial touchscreen"
259 Say Y here if you have a Dynapro serial touchscreen connected to
264 To compile this driver as a module, choose M here: the
265 module will be called dynapro.
267 config TOUCHSCREEN_HAMPSHIRE
268 tristate "Hampshire serial touchscreen"
271 Say Y here if you have a Hampshire serial touchscreen connected to
276 To compile this driver as a module, choose M here: the
277 module will be called hampshire.
279 config TOUCHSCREEN_EETI
280 tristate "EETI touchscreen panel support"
283 Say Y here to enable support for I2C connected EETI touch panels.
285 To compile this driver as a module, choose M here: the
286 module will be called eeti_ts.
288 config TOUCHSCREEN_EGALAX
289 tristate "EETI eGalax multi-touch panel support"
292 Say Y here to enable support for I2C connected EETI
293 eGalax multi-touch panels.
295 To compile this driver as a module, choose M here: the
296 module will be called egalax_ts.
298 config TOUCHSCREEN_FUJITSU
299 tristate "Fujitsu serial touchscreen"
302 Say Y here if you have the Fujitsu touchscreen (such as one
303 installed in Lifebook P series laptop) connected to your
308 To compile this driver as a module, choose M here: the
309 module will be called fujitsu-ts.
311 config TOUCHSCREEN_GOODIX
312 tristate "Goodix I2C touchscreen"
315 Say Y here if you have the Goodix touchscreen (such as one
316 installed in Onda v975w tablets) connected to your
317 system. It also supports 5-finger chip models, which can be
318 found on ARM tablets, like Wexler TAB7200 and MSI Primo73.
322 To compile this driver as a module, choose M here: the
323 module will be called goodix.
325 config TOUCHSCREEN_ILI210X
326 tristate "Ilitek ILI210X based touchscreen"
329 Say Y here if you have a ILI210X based touchscreen
330 controller. This driver supports models ILI2102,
331 ILI2102s, ILI2103, ILI2103s and ILI2105.
332 Such kind of chipsets can be found in Amazon Kindle Fire
337 To compile this driver as a module, choose M here: the
338 module will be called ili210x.
340 config TOUCHSCREEN_IPROC
341 tristate "IPROC touch panel driver support"
342 depends on ARCH_BCM_IPROC || COMPILE_TEST
344 Say Y here if you want to add support for the IPROC touch
345 controller to your system.
349 To compile this driver as a module, choose M here: the
350 module will be called bcm_iproc_tsc.
352 config TOUCHSCREEN_S3C2410
353 tristate "Samsung S3C2410/generic touchscreen input driver"
354 depends on ARCH_S3C24XX || SAMSUNG_DEV_TS
357 Say Y here if you have the s3c2410 touchscreen.
361 To compile this driver as a module, choose M here: the
362 module will be called s3c2410_ts.
364 config TOUCHSCREEN_GUNZE
365 tristate "Gunze AHL-51S touchscreen"
368 Say Y here if you have the Gunze AHL-51 touchscreen connected to
373 To compile this driver as a module, choose M here: the
374 module will be called gunze.
376 config TOUCHSCREEN_ELAN
377 tristate "Elan eKTH I2C touchscreen"
380 Say Y here if you have an Elan eKTH I2C touchscreen
381 connected to your system.
385 To compile this driver as a module, choose M here: the
386 module will be called elants_i2c.
388 config TOUCHSCREEN_ELO
389 tristate "Elo serial touchscreens"
392 Say Y here if you have an Elo serial touchscreen connected to
397 To compile this driver as a module, choose M here: the
398 module will be called elo.
400 config TOUCHSCREEN_WACOM_W8001
401 tristate "Wacom W8001 penabled serial touchscreen"
404 Say Y here if you have an Wacom W8001 penabled serial touchscreen
405 connected to your system.
409 To compile this driver as a module, choose M here: the
410 module will be called wacom_w8001.
412 config TOUCHSCREEN_WACOM_I2C
413 tristate "Wacom Tablet support (I2C)"
416 Say Y here if you want to use the I2C version of the Wacom
421 To compile this driver as a module, choose M here: the module
422 will be called wacom_i2c.
424 config TOUCHSCREEN_LPC32XX
425 tristate "LPC32XX touchscreen controller"
426 depends on ARCH_LPC32XX
428 Say Y here if you have a LPC32XX device and want
429 to support the built-in touchscreen.
431 To compile this driver as a module, choose M here: the
432 module will be called lpc32xx_ts.
434 config TOUCHSCREEN_MAX11801
435 tristate "MAX11801 based touchscreens"
438 Say Y here if you have a MAX11801 based touchscreen
443 To compile this driver as a module, choose M here: the
444 module will be called max11801_ts.
446 config TOUCHSCREEN_MCS5000
447 tristate "MELFAS MCS-5000 touchscreen"
450 Say Y here if you have the MELFAS MCS-5000 touchscreen controller
455 To compile this driver as a module, choose M here: the
456 module will be called mcs5000_ts.
458 config TOUCHSCREEN_MMS114
459 tristate "MELFAS MMS114 touchscreen"
462 Say Y here if you have the MELFAS MMS114 touchscreen controller
467 To compile this driver as a module, choose M here: the
468 module will be called mms114.
470 config TOUCHSCREEN_MTOUCH
471 tristate "MicroTouch serial touchscreens"
474 Say Y here if you have a MicroTouch (3M) serial touchscreen connected to
479 To compile this driver as a module, choose M here: the
480 module will be called mtouch.
482 config TOUCHSCREEN_IMX6UL_TSC
483 tristate "Freescale i.MX6UL touchscreen controller"
484 depends on (OF && GPIOLIB) || COMPILE_TEST
486 Say Y here if you have a Freescale i.MX6UL, and want to
487 use the internal touchscreen controller.
491 To compile this driver as a module, choose M here: the
492 module will be called imx6ul_tsc.
494 config TOUCHSCREEN_INEXIO
495 tristate "iNexio serial touchscreens"
498 Say Y here if you have an iNexio serial touchscreen connected to
503 To compile this driver as a module, choose M here: the
504 module will be called inexio.
506 config TOUCHSCREEN_INTEL_MID
507 tristate "Intel MID platform resistive touchscreen"
508 depends on INTEL_SCU_IPC
510 Say Y here if you have a Intel MID based touchscreen in
515 To compile this driver as a module, choose M here: the
516 module will be called intel_mid_touch.
518 config TOUCHSCREEN_MK712
519 tristate "ICS MicroClock MK712 touchscreen"
521 Say Y here if you have the ICS MicroClock MK712 touchscreen
522 controller chip in your system.
526 To compile this driver as a module, choose M here: the
527 module will be called mk712.
529 config TOUCHSCREEN_HP600
530 tristate "HP Jornada 6xx touchscreen"
531 depends on SH_HP6XX && SH_ADC
533 Say Y here if you have a HP Jornada 620/660/680/690 and want to
534 support the built-in touchscreen.
536 To compile this driver as a module, choose M here: the
537 module will be called hp680_ts_input.
539 config TOUCHSCREEN_HP7XX
540 tristate "HP Jornada 7xx touchscreen"
541 depends on SA1100_JORNADA720_SSP
543 Say Y here if you have a HP Jornada 710/720/728 and want
544 to support the built-in touchscreen.
546 To compile this driver as a module, choose M here: the
547 module will be called jornada720_ts.
549 config TOUCHSCREEN_IPAQ_MICRO
550 tristate "HP iPAQ Atmel Micro ASIC touchscreen"
551 depends on MFD_IPAQ_MICRO
553 Say Y here to enable support for the touchscreen attached to
554 the Atmel Micro peripheral controller on iPAQ h3100/h3600/h3700
558 To compile this driver as a module, choose M here: the
559 module will be called ipaq-micro-ts.
561 config TOUCHSCREEN_HTCPEN
562 tristate "HTC Shift X9500 touchscreen"
565 Say Y here if you have an HTC Shift UMPC also known as HTC X9500
566 Clio / Shangrila and want to support the built-in touchscreen.
570 To compile this driver as a module, choose M here: the
571 module will be called htcpen.
573 config TOUCHSCREEN_PENMOUNT
574 tristate "Penmount serial touchscreen"
577 Say Y here if you have a Penmount serial touchscreen connected to
582 To compile this driver as a module, choose M here: the
583 module will be called penmount.
585 config TOUCHSCREEN_EDT_FT5X06
586 tristate "EDT FocalTech FT5x06 I2C Touchscreen support"
589 Say Y here if you have an EDT "Polytouch" touchscreen based
590 on the FocalTech FT5x06 family of controllers connected to
595 To compile this driver as a module, choose M here: the
596 module will be called edt-ft5x06.
598 config TOUCHSCREEN_MIGOR
599 tristate "Renesas MIGO-R touchscreen"
600 depends on SH_MIGOR && I2C
602 Say Y here to enable MIGO-R touchscreen support.
606 To compile this driver as a module, choose M here: the
607 module will be called migor_ts.
609 config TOUCHSCREEN_TOUCHRIGHT
610 tristate "Touchright serial touchscreen"
613 Say Y here if you have a Touchright serial touchscreen connected to
618 To compile this driver as a module, choose M here: the
619 module will be called touchright.
621 config TOUCHSCREEN_TOUCHWIN
622 tristate "Touchwin serial touchscreen"
625 Say Y here if you have a Touchwin serial touchscreen connected to
630 To compile this driver as a module, choose M here: the
631 module will be called touchwin.
633 config TOUCHSCREEN_TI_AM335X_TSC
634 tristate "TI Touchscreen Interface"
635 depends on MFD_TI_AM335X_TSCADC
637 Say Y here if you have 4/5/8 wire touchscreen controller
638 to be connected to the ADC controller on your TI AM335x SoC.
642 To compile this driver as a module, choose M here: the
643 module will be called ti_am335x_tsc.
645 config TOUCHSCREEN_UCB1400
646 tristate "Philips UCB1400 touchscreen"
648 depends on UCB1400_CORE
650 This enables support for the Philips UCB1400 touchscreen interface.
651 The UCB1400 is an AC97 audio codec. The touchscreen interface
652 will be initialized only after the ALSA subsystem has been
653 brought up and the UCB1400 detected. You therefore have to
654 configure ALSA support as well (either built-in or modular,
655 independently of whether this driver is itself built-in or
656 modular) for this driver to work.
658 To compile this driver as a module, choose M here: the
659 module will be called ucb1400_ts.
661 config TOUCHSCREEN_PIXCIR
662 tristate "PIXCIR I2C touchscreens"
665 Say Y here if you have a pixcir i2c touchscreen
670 To compile this driver as a module, choose M here: the
671 module will be called pixcir_i2c_ts.
673 config TOUCHSCREEN_WDT87XX_I2C
674 tristate "Weida HiTech I2C touchscreen"
677 Say Y here if you have a Weida WDT87XX I2C touchscreen
678 connected to your system.
682 To compile this driver as a module, choose M here: the
683 module will be called wdt87xx_i2c.
685 config TOUCHSCREEN_WM831X
686 tristate "Support for WM831x touchscreen controllers"
687 depends on MFD_WM831X
689 This enables support for the touchscreen controller on the WM831x
692 To compile this driver as a module, choose M here: the
693 module will be called wm831x-ts.
695 config TOUCHSCREEN_WM97XX
696 tristate "Support for WM97xx AC97 touchscreen controllers"
699 Say Y here if you have a Wolfson Microelectronics WM97xx
700 touchscreen connected to your system. Note that this option
701 only enables core driver, you will also need to select
702 support for appropriate chip below.
706 To compile this driver as a module, choose M here: the
707 module will be called wm97xx-ts.
709 config TOUCHSCREEN_WM9705
710 bool "WM9705 Touchscreen interface support"
711 depends on TOUCHSCREEN_WM97XX
714 Say Y here to enable support for the Wolfson Microelectronics
715 WM9705 touchscreen controller.
717 config TOUCHSCREEN_WM9712
718 bool "WM9712 Touchscreen interface support"
719 depends on TOUCHSCREEN_WM97XX
722 Say Y here to enable support for the Wolfson Microelectronics
723 WM9712 touchscreen controller.
725 config TOUCHSCREEN_WM9713
726 bool "WM9713 Touchscreen interface support"
727 depends on TOUCHSCREEN_WM97XX
730 Say Y here to enable support for the Wolfson Microelectronics
731 WM9713 touchscreen controller.
733 config TOUCHSCREEN_WM97XX_ATMEL
734 tristate "WM97xx Atmel accelerated touch"
735 depends on TOUCHSCREEN_WM97XX && AVR32
737 Say Y here for support for streaming mode with WM97xx touchscreens
738 on Atmel AT91 or AVR32 systems with an AC97C module.
740 Be aware that this will use channel B in the controller for
741 streaming data, this must not conflict with other AC97C drivers.
745 To compile this driver as a module, choose M here: the module will
746 be called atmel-wm97xx.
748 config TOUCHSCREEN_WM97XX_MAINSTONE
749 tristate "WM97xx Mainstone/Palm accelerated touch"
750 depends on TOUCHSCREEN_WM97XX && ARCH_PXA
752 Say Y here for support for streaming mode with WM97xx touchscreens
753 on Mainstone, Palm Tungsten T5, TX and LifeDrive systems.
757 To compile this driver as a module, choose M here: the
758 module will be called mainstone-wm97xx.
760 config TOUCHSCREEN_WM97XX_ZYLONITE
761 tristate "Zylonite accelerated touch"
762 depends on TOUCHSCREEN_WM97XX && MACH_ZYLONITE
763 select TOUCHSCREEN_WM9713
765 Say Y here for support for streaming mode with the touchscreen
770 To compile this driver as a module, choose M here: the
771 module will be called zylonite-wm97xx.
773 config TOUCHSCREEN_USB_COMPOSITE
774 tristate "USB Touchscreen Driver"
775 depends on USB_ARCH_HAS_HCD
778 USB Touchscreen driver for:
779 - eGalax Touchkit USB (also includes eTurboTouch CT-410/510/700)
780 - PanJit TouchSet USB
781 - 3M MicroTouch USB (EX II series)
783 - some other eTurboTouch
786 - IRTOUCHSYSTEMS/UNITOP
788 - GoTop Super_Q2/GogoPen/PenPower tablets
789 - JASTEC USB Touch Controller/DigiTech DTR-02U
790 - Zytronic controllers
791 - Elo TouchSystems 2700 IntelliTouch
792 - EasyTouch USB Touch Controller from Data Modul
793 - e2i (Mimo monitors)
795 Have a look at <http://linux.chapter7.ch/touchkit/> for
796 a usage description and the required user-space stuff.
798 To compile this driver as a module, choose M here: the
799 module will be called usbtouchscreen.
801 config TOUCHSCREEN_MC13783
802 tristate "Freescale MC13783 touchscreen input driver"
803 depends on MFD_MC13XXX
805 Say Y here if you have an Freescale MC13783 PMIC on your
806 board and want to use its touchscreen
810 To compile this driver as a module, choose M here: the
811 module will be called mc13783_ts.
813 config TOUCHSCREEN_USB_EGALAX
815 bool "eGalax, eTurboTouch CT-410/510/700 device support" if EXPERT
816 depends on TOUCHSCREEN_USB_COMPOSITE
818 config TOUCHSCREEN_USB_PANJIT
820 bool "PanJit device support" if EXPERT
821 depends on TOUCHSCREEN_USB_COMPOSITE
823 config TOUCHSCREEN_USB_3M
825 bool "3M/Microtouch EX II series device support" if EXPERT
826 depends on TOUCHSCREEN_USB_COMPOSITE
828 config TOUCHSCREEN_USB_ITM
830 bool "ITM device support" if EXPERT
831 depends on TOUCHSCREEN_USB_COMPOSITE
833 config TOUCHSCREEN_USB_ETURBO
835 bool "eTurboTouch (non-eGalax compatible) device support" if EXPERT
836 depends on TOUCHSCREEN_USB_COMPOSITE
838 config TOUCHSCREEN_USB_GUNZE
840 bool "Gunze AHL61 device support" if EXPERT
841 depends on TOUCHSCREEN_USB_COMPOSITE
843 config TOUCHSCREEN_USB_DMC_TSC10
845 bool "DMC TSC-10/25 device support" if EXPERT
846 depends on TOUCHSCREEN_USB_COMPOSITE
848 config TOUCHSCREEN_USB_IRTOUCH
850 bool "IRTOUCHSYSTEMS/UNITOP device support" if EXPERT
851 depends on TOUCHSCREEN_USB_COMPOSITE
853 config TOUCHSCREEN_USB_IDEALTEK
855 bool "IdealTEK URTC1000 device support" if EXPERT
856 depends on TOUCHSCREEN_USB_COMPOSITE
858 config TOUCHSCREEN_USB_GENERAL_TOUCH
860 bool "GeneralTouch Touchscreen device support" if EXPERT
861 depends on TOUCHSCREEN_USB_COMPOSITE
863 config TOUCHSCREEN_USB_GOTOP
865 bool "GoTop Super_Q2/GogoPen/PenPower tablet device support" if EXPERT
866 depends on TOUCHSCREEN_USB_COMPOSITE
868 config TOUCHSCREEN_USB_JASTEC
870 bool "JASTEC/DigiTech DTR-02U USB touch controller device support" if EXPERT
871 depends on TOUCHSCREEN_USB_COMPOSITE
873 config TOUCHSCREEN_USB_ELO
875 bool "Elo TouchSystems 2700 IntelliTouch controller device support" if EXPERT
876 depends on TOUCHSCREEN_USB_COMPOSITE
878 config TOUCHSCREEN_USB_E2I
880 bool "e2i Touchscreen controller (e.g. from Mimo 740)" if EXPERT
881 depends on TOUCHSCREEN_USB_COMPOSITE
883 config TOUCHSCREEN_USB_ZYTRONIC
885 bool "Zytronic controller" if EXPERT
886 depends on TOUCHSCREEN_USB_COMPOSITE
888 config TOUCHSCREEN_USB_ETT_TC45USB
890 bool "ET&T USB series TC4UM/TC5UH touchscreen controller support" if EXPERT
891 depends on TOUCHSCREEN_USB_COMPOSITE
893 config TOUCHSCREEN_USB_NEXIO
895 bool "NEXIO/iNexio device support" if EXPERT
896 depends on TOUCHSCREEN_USB_COMPOSITE
898 config TOUCHSCREEN_USB_EASYTOUCH
900 bool "EasyTouch USB Touch controller device support" if EMBEDDED
901 depends on TOUCHSCREEN_USB_COMPOSITE
903 Say Y here if you have an EasyTouch USB Touch controller.
906 config TOUCHSCREEN_TOUCHIT213
907 tristate "Sahara TouchIT-213 touchscreen"
910 Say Y here if you have a Sahara TouchIT-213 Tablet PC.
914 To compile this driver as a module, choose M here: the
915 module will be called touchit213.
917 config TOUCHSCREEN_TSC_SERIO
918 tristate "TSC-10/25/40 serial touchscreen support"
921 Say Y here if you have a TSC-10, 25 or 40 serial touchscreen connected
926 To compile this driver as a module, choose M here: the
927 module will be called tsc40.
929 config TOUCHSCREEN_TSC2005
930 tristate "TSC2005 based touchscreens"
931 depends on SPI_MASTER
934 Say Y here if you have a TSC2005 based touchscreen.
938 To compile this driver as a module, choose M here: the
939 module will be called tsc2005.
941 config TOUCHSCREEN_TSC2007
942 tristate "TSC2007 based touchscreens"
945 Say Y here if you have a TSC2007 based touchscreen.
949 To compile this driver as a module, choose M here: the
950 module will be called tsc2007.
952 config TOUCHSCREEN_W90X900
953 tristate "W90P910 touchscreen driver"
954 depends on ARCH_W90X900
956 Say Y here if you have a W90P910 based touchscreen.
958 To compile this driver as a module, choose M here: the
959 module will be called w90p910_ts.
961 config TOUCHSCREEN_PCAP
962 tristate "Motorola PCAP touchscreen"
965 Say Y here if you have a Motorola EZX telephone and
966 want to enable support for the built-in touchscreen.
968 To compile this driver as a module, choose M here: the
969 module will be called pcap_ts.
971 config TOUCHSCREEN_ST1232
972 tristate "Sitronix ST1232 touchscreen controllers"
975 Say Y here if you want to support Sitronix ST1232
976 touchscreen controller.
980 To compile this driver as a module, choose M here: the
981 module will be called st1232_ts.
983 config TOUCHSCREEN_STMPE
984 tristate "STMicroelectronics STMPE touchscreens"
986 depends on (OF || COMPILE_TEST)
988 Say Y here if you want support for STMicroelectronics
989 STMPE touchscreen controllers.
991 To compile this driver as a module, choose M here: the
992 module will be called stmpe-ts.
994 config TOUCHSCREEN_SUN4I
995 tristate "Allwinner sun4i resistive touchscreen controller support"
996 depends on ARCH_SUNXI || COMPILE_TEST
998 depends on THERMAL || !THERMAL_OF
1000 This selects support for the resistive touchscreen controller
1001 found on Allwinner sunxi SoCs.
1003 To compile this driver as a module, choose M here: the
1004 module will be called sun4i-ts.
1006 config TOUCHSCREEN_SUR40
1007 tristate "Samsung SUR40 (Surface 2.0/PixelSense) touchscreen"
1008 depends on USB && MEDIA_USB_SUPPORT && HAS_DMA
1009 select INPUT_POLLDEV
1010 select VIDEOBUF2_DMA_SG
1012 Say Y here if you want support for the Samsung SUR40 touchscreen
1013 (also known as Microsoft Surface 2.0 or Microsoft PixelSense).
1015 To compile this driver as a module, choose M here: the
1016 module will be called sur40.
1018 config TOUCHSCREEN_SX8654
1019 tristate "Semtech SX8654 touchscreen"
1022 Say Y here if you have a Semtech SX8654 touchscreen controller.
1026 To compile this driver as a module, choose M here: the
1027 module will be called sx8654.
1029 config TOUCHSCREEN_TPS6507X
1030 tristate "TPS6507x based touchscreens"
1032 select INPUT_POLLDEV
1034 Say Y here if you have a TPS6507x based touchscreen
1039 To compile this driver as a module, choose M here: the
1040 module will be called tps6507x_ts.
1042 config TOUCHSCREEN_ZFORCE
1043 tristate "Neonode zForce infrared touchscreens"
1045 depends on GPIOLIB || COMPILE_TEST
1047 Say Y here if you have a touchscreen using the zforce
1048 infraread technology from Neonode.
1052 To compile this driver as a module, choose M here: the
1053 module will be called zforce_ts.
1055 config TOUCHSCREEN_COLIBRI_VF50
1056 tristate "Toradex Colibri on board touchscreen driver"
1057 depends on GPIOLIB && IIO && VF610_ADC
1059 Say Y here if you have a Colibri VF50 and plan to use
1060 the on-board provided 4-wire touchscreen driver.
1064 To compile this driver as a module, choose M here: the
1065 module will be called colibri_vf50_ts.