2 * Copyright (C) 2002 ARM Limited, All Rights Reserved.
4 * This program is free software; you can redistribute it and/or modify
5 * it under the terms of the GNU General Public License version 2 as
6 * published by the Free Software Foundation.
8 * This program is distributed in the hope that it will be useful,
9 * but WITHOUT ANY WARRANTY; without even the implied warranty of
10 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
11 * GNU General Public License for more details.
13 * You should have received a copy of the GNU General Public License
14 * along with this program. If not, see <http://www.gnu.org/licenses/>.
17 #include <linux/interrupt.h>
19 #include <linux/irq.h>
20 #include <linux/irqchip/arm-gic.h>
22 #include "irq-gic-common.h"
24 void gic_enable_quirks(u32 iidr, const struct gic_quirk *quirks,
27 for (; quirks->desc; quirks++) {
28 if (quirks->iidr != (quirks->mask & iidr))
31 pr_info("GIC: enabling workaround for %s\n", quirks->desc);
35 int gic_configure_irq(unsigned int irq, unsigned int type,
36 void __iomem *base, void (*sync_access)(void))
38 u32 confmask = 0x2 << ((irq % 16) * 2);
39 u32 confoff = (irq / 16) * 4;
44 * Read current configuration register, and insert the config
45 * for "irq", depending on "type".
47 val = oldval = readl_relaxed(base + GIC_DIST_CONFIG + confoff);
48 if (type & IRQ_TYPE_LEVEL_MASK)
50 else if (type & IRQ_TYPE_EDGE_BOTH)
54 * Write back the new configuration, and possibly re-enable
55 * the interrupt. If we tried to write a new configuration and failed,
58 writel_relaxed(val, base + GIC_DIST_CONFIG + confoff);
59 if (readl_relaxed(base + GIC_DIST_CONFIG + confoff) != val && val != oldval)
68 void __init gic_dist_config(void __iomem *base, int gic_irqs,
69 void (*sync_access)(void))
74 * Set all global interrupts to be level triggered, active low.
76 for (i = 32; i < gic_irqs; i += 16)
77 writel_relaxed(GICD_INT_ACTLOW_LVLTRIG,
78 base + GIC_DIST_CONFIG + i / 4);
81 * Set priority on all global interrupts.
83 for (i = 32; i < gic_irqs; i += 4)
84 writel_relaxed(GICD_INT_DEF_PRI_X4, base + GIC_DIST_PRI + i);
87 * Disable all interrupts. Leave the PPI and SGIs alone
88 * as they are enabled by redistributor registers.
90 for (i = 32; i < gic_irqs; i += 32)
91 writel_relaxed(GICD_INT_EN_CLR_X32,
92 base + GIC_DIST_ENABLE_CLEAR + i / 8);
98 void gic_cpu_config(void __iomem *base, void (*sync_access)(void))
103 * Deal with the banked PPI and SGI interrupts - disable all
104 * PPI interrupts, ensure all SGI interrupts are enabled.
106 writel_relaxed(GICD_INT_EN_CLR_PPI, base + GIC_DIST_ENABLE_CLEAR);
107 writel_relaxed(GICD_INT_EN_SET_SGI, base + GIC_DIST_ENABLE_SET);
110 * Set priority on PPI and SGI interrupts
112 for (i = 0; i < 32; i += 4)
113 writel_relaxed(GICD_INT_DEF_PRI_X4,
114 base + GIC_DIST_PRI + i * 4 / 4);