2 * Audio crossconnecting/conferrencing (hardware level).
4 * Copyright 2002 by Andreas Eversberg (jolly@eversberg.eu)
6 * This software may be used and distributed according to the terms
7 * of the GNU General Public License, incorporated herein by reference.
12 * The process of adding and removing parties to/from a conference:
14 * There is a chain of struct dsp_conf which has one or more members in a chain
15 * of struct dsp_conf_member.
17 * After a party is added, the conference is checked for hardware capability.
18 * Also if a party is removed, the conference is checked again.
20 * There are 3 different solutions: -1 = software, 0 = hardware-crossconnect
21 * 1-n = hardware-conference. The n will give the conference number.
23 * Depending on the change after removal or insertion of a party, hardware
26 * The current solution is stored within the struct dsp_conf entry.
32 * There are 3 types of interaction: One member is alone, in this case only
33 * data flow from upper to lower layer is done.
34 * Two members will also exchange their data so they are crossconnected.
35 * Three or more members will be added in a conference and will hear each
36 * other but will not receive their own speech (echo) if not enabled.
38 * Features of CMX are:
39 * - Crossconnecting or even conference, if more than two members are together.
40 * - Force mixing of transmit data with other crossconnect/conference members.
41 * - Echo generation to benchmark the delay of audio processing.
42 * - Use hardware to minimize cpu load, disable FIFO load and minimize delay.
43 * - Dejittering and clock generation.
45 * There are 2 buffers:
51 * ----------------+-------------+-------------------
53 * The rx-buffer is a ring buffer used to store the received data for each
54 * individual member. This is only the case if data needs to be dejittered
55 * or in case of a conference where different clocks require reclocking.
56 * The transmit-clock (R) will read the buffer.
57 * If the clock overruns the write-pointer, we will have a buffer underrun.
58 * If the write pointer always has a certain distance from the transmit-
59 * clock, we will have a delay. The delay will dynamically be increased and
66 * -----------------+--------+-----------------------
68 * The tx-buffer is a ring buffer to queue the transmit data from user space
69 * until it will be mixed or sent. There are two pointers, R and W. If the write
70 * pointer W would reach or overrun R, the buffer would overrun. In this case
71 * (some) data is dropped so that it will not overrun.
72 * Additionally a dynamic dejittering can be enabled. this allows data from
73 * user space that have jitter and different clock source.
78 * A Clock is not required, if the data source has exactly one clock. In this
79 * case the data source is forwarded to the destination.
81 * A Clock is required, because the data source
82 * - has multiple clocks.
83 * - has no usable clock due to jitter or packet loss (VoIP).
84 * In this case the system's clock is used. The clock resolution depends on
85 * the jiffie resolution.
87 * If a member joins a conference:
89 * - If a member joins, its rx_buff is set to silence and change read pointer
92 * The procedure of received data from card is explained in cmx_receive.
93 * The procedure of received data from user space is explained in cmx_transmit.
94 * The procedure of transmit data to card is cmx_send.
97 * Interaction with other features:
100 * DTMF decoding is done before the data is crossconnected.
103 * Changing rx-volume is done before the data is crossconnected. The tx-volume
104 * must be changed whenever data is transmitted to the card by the cmx.
107 * If a tone is enabled, it will be processed whenever data is transmitted to
108 * the card. It will replace the tx-data from the user space.
109 * If tones are generated by hardware, this conference member is removed for
113 * If cmx is realized in hardware, rx data will be disabled if requested by
114 * the upper layer. If dtmf decoding is done by software and enabled, rx data
115 * will not be disabled but blocked to the upper layer.
117 * HFC conference engine:
118 * If it is possible to realize all features using hardware, hardware will be
119 * used if not forbidden by control command. Disabling rx-data provides
120 * absolutely traffic free audio processing. (except for the quick 1-frame
121 * upload of a tone loop, only once for a new tone)
125 /* delay.h is required for hw_lock.h */
127 #include <linux/slab.h>
128 #include <linux/delay.h>
129 #include <linux/mISDNif.h>
130 #include <linux/mISDNdsp.h>
134 * debugging of multi party conference,
135 * by using conference even with two members
138 /* #define CMX_CONF_DEBUG */
140 /*#define CMX_DEBUG * massive read/write pointer output */
141 /*#define CMX_DELAY_DEBUG * gives rx-buffer delay overview */
142 /*#define CMX_TX_DEBUG * massive read/write on tx-buffer with content */
145 count_list_member(struct list_head *head)
150 list_for_each(m, head)
156 * debug cmx memory structure
159 dsp_cmx_debug(struct dsp *dsp)
161 struct dsp_conf *conf;
162 struct dsp_conf_member *member;
165 printk(KERN_DEBUG "-----Current DSP\n");
166 list_for_each_entry(odsp, &dsp_ilist, list) {
167 printk(KERN_DEBUG "* %s hardecho=%d softecho=%d txmix=%d",
168 odsp->name, odsp->echo.hardware, odsp->echo.software,
171 printk(" (Conf %d)", odsp->conf->id);
176 printk(KERN_DEBUG "-----Current Conf:\n");
177 list_for_each_entry(conf, &conf_ilist, list) {
178 printk(KERN_DEBUG "* Conf %d (%p)\n", conf->id, conf);
179 list_for_each_entry(member, &conf->mlist, list) {
181 " - member = %s (slot_tx %d, bank_tx %d, "
182 "slot_rx %d, bank_rx %d hfc_conf %d "
183 "tx_data %d rx_is_off %d)%s\n",
184 member->dsp->name, member->dsp->pcm_slot_tx,
185 member->dsp->pcm_bank_tx, member->dsp->pcm_slot_rx,
186 member->dsp->pcm_bank_rx, member->dsp->hfc_conf,
187 member->dsp->tx_data, member->dsp->rx_is_off,
188 (member->dsp == dsp) ? " *this*" : "");
191 printk(KERN_DEBUG "-----end\n");
197 static struct dsp_conf *
198 dsp_cmx_search_conf(u32 id)
200 struct dsp_conf *conf;
203 printk(KERN_WARNING "%s: conference ID is 0.\n", __func__);
207 /* search conference */
208 list_for_each_entry(conf, &conf_ilist, list)
217 * add member to conference
220 dsp_cmx_add_conf_member(struct dsp *dsp, struct dsp_conf *conf)
222 struct dsp_conf_member *member;
225 printk(KERN_WARNING "%s: conf or dsp is 0.\n", __func__);
229 printk(KERN_WARNING "%s: dsp is already member in a conf.\n",
235 printk(KERN_WARNING "%s: dsp is already in a conf.\n",
240 member = kzalloc(sizeof(struct dsp_conf_member), GFP_ATOMIC);
242 printk(KERN_ERR "kzalloc struct dsp_conf_member failed\n");
246 /* clear rx buffer */
247 memset(dsp->rx_buff, dsp_silence, sizeof(dsp->rx_buff));
248 dsp->rx_init = 1; /* rx_W and rx_R will be adjusted on first frame */
252 list_add_tail(&member->list, &conf->mlist);
255 dsp->member = member;
262 * del member from conference
265 dsp_cmx_del_conf_member(struct dsp *dsp)
267 struct dsp_conf_member *member;
270 printk(KERN_WARNING "%s: dsp is 0.\n",
276 printk(KERN_WARNING "%s: dsp is not in a conf.\n",
281 if (list_empty(&dsp->conf->mlist)) {
282 printk(KERN_WARNING "%s: dsp has linked an empty conf.\n",
287 /* find us in conf */
288 list_for_each_entry(member, &dsp->conf->mlist, list) {
289 if (member->dsp == dsp) {
290 list_del(&member->list);
298 "%s: dsp is not present in its own conf_meber list.\n",
308 static struct dsp_conf
309 *dsp_cmx_new_conf(u32 id)
311 struct dsp_conf *conf;
314 printk(KERN_WARNING "%s: id is 0.\n",
319 conf = kzalloc(sizeof(struct dsp_conf), GFP_ATOMIC);
321 printk(KERN_ERR "kzalloc struct dsp_conf failed\n");
324 INIT_LIST_HEAD(&conf->mlist);
327 list_add_tail(&conf->list, &conf_ilist);
337 dsp_cmx_del_conf(struct dsp_conf *conf)
340 printk(KERN_WARNING "%s: conf is null.\n",
345 if (!list_empty(&conf->mlist)) {
346 printk(KERN_WARNING "%s: conf not empty.\n",
350 list_del(&conf->list);
358 * send HW message to hfc card
361 dsp_cmx_hw_message(struct dsp *dsp, u32 message, u32 param1, u32 param2,
362 u32 param3, u32 param4)
364 struct mISDN_ctrl_req cq;
366 memset(&cq, 0, sizeof(cq));
368 cq.p1 = param1 | (param2 << 8);
369 cq.p2 = param3 | (param4 << 8);
371 dsp->ch.peer->ctrl(dsp->ch.peer, CONTROL_CHANNEL, &cq);
376 * do hardware update and set the software/hardware flag
378 * either a conference or a dsp instance can be given
379 * if only dsp instance is given, the instance is not associated with a conf
380 * and therefore removed. if a conference is given, the dsp is expected to
381 * be member of that conference.
384 dsp_cmx_hardware(struct dsp_conf *conf, struct dsp *dsp)
386 struct dsp_conf_member *member, *nextm;
388 int memb = 0, i, ii, i1, i2;
390 u_char freeslots[256];
391 int same_hfc = -1, same_pcm = -1, current_conf = -1,
392 all_conf = 1, tx_data = 0;
394 /* dsp gets updated (no conf) */
398 if (dsp_debug & DEBUG_DSP_CMX)
399 printk(KERN_DEBUG "%s checking dsp %s\n",
400 __func__, dsp->name);
402 /* remove HFC conference if enabled */
403 if (dsp->hfc_conf >= 0) {
404 if (dsp_debug & DEBUG_DSP_CMX)
406 "%s removing %s from HFC conf %d "
407 "because dsp is split\n", __func__,
408 dsp->name, dsp->hfc_conf);
409 dsp_cmx_hw_message(dsp, MISDN_CTRL_HFC_CONF_SPLIT,
413 /* process hw echo */
414 if (dsp->features.pcm_banks < 1)
416 if (!dsp->echo.software && !dsp->echo.hardware) {
417 /* NO ECHO: remove PCM slot if assigned */
418 if (dsp->pcm_slot_tx >= 0 || dsp->pcm_slot_rx >= 0) {
419 if (dsp_debug & DEBUG_DSP_CMX)
420 printk(KERN_DEBUG "%s removing %s from"
421 " PCM slot %d (TX) %d (RX) because"
422 " dsp is split (no echo)\n",
424 dsp->pcm_slot_tx, dsp->pcm_slot_rx);
425 dsp_cmx_hw_message(dsp, MISDN_CTRL_HFC_PCM_DISC,
427 dsp->pcm_slot_tx = -1;
428 dsp->pcm_bank_tx = -1;
429 dsp->pcm_slot_rx = -1;
430 dsp->pcm_bank_rx = -1;
434 /* echo is enabled, find out if we use soft or hardware */
435 dsp->echo.software = dsp->tx_data;
436 dsp->echo.hardware = 0;
437 /* ECHO: already echo */
438 if (dsp->pcm_slot_tx >= 0 && dsp->pcm_slot_rx < 0 &&
439 dsp->pcm_bank_tx == 2 && dsp->pcm_bank_rx == 2) {
440 dsp->echo.hardware = 1;
443 /* ECHO: if slot already assigned */
444 if (dsp->pcm_slot_tx >= 0) {
445 dsp->pcm_slot_rx = dsp->pcm_slot_tx;
446 dsp->pcm_bank_tx = 2; /* 2 means loop */
447 dsp->pcm_bank_rx = 2;
448 if (dsp_debug & DEBUG_DSP_CMX)
450 "%s refresh %s for echo using slot %d\n",
453 dsp_cmx_hw_message(dsp, MISDN_CTRL_HFC_PCM_CONN,
454 dsp->pcm_slot_tx, 2, dsp->pcm_slot_rx, 2);
455 dsp->echo.hardware = 1;
458 /* ECHO: find slot */
459 dsp->pcm_slot_tx = -1;
460 dsp->pcm_slot_rx = -1;
461 memset(freeslots, 1, sizeof(freeslots));
462 list_for_each_entry(finddsp, &dsp_ilist, list) {
463 if (finddsp->features.pcm_id == dsp->features.pcm_id) {
464 if (finddsp->pcm_slot_rx >= 0 &&
465 finddsp->pcm_slot_rx < sizeof(freeslots))
466 freeslots[finddsp->pcm_slot_rx] = 0;
467 if (finddsp->pcm_slot_tx >= 0 &&
468 finddsp->pcm_slot_tx < sizeof(freeslots))
469 freeslots[finddsp->pcm_slot_tx] = 0;
473 ii = dsp->features.pcm_slots;
480 if (dsp_debug & DEBUG_DSP_CMX)
482 "%s no slot available for echo\n",
484 /* no more slots available */
485 dsp->echo.software = 1;
488 /* assign free slot */
489 dsp->pcm_slot_tx = i;
490 dsp->pcm_slot_rx = i;
491 dsp->pcm_bank_tx = 2; /* loop */
492 dsp->pcm_bank_rx = 2;
493 if (dsp_debug & DEBUG_DSP_CMX)
495 "%s assign echo for %s using slot %d\n",
496 __func__, dsp->name, dsp->pcm_slot_tx);
497 dsp_cmx_hw_message(dsp, MISDN_CTRL_HFC_PCM_CONN,
498 dsp->pcm_slot_tx, 2, dsp->pcm_slot_rx, 2);
499 dsp->echo.hardware = 1;
503 /* conf gets updated (all members) */
504 if (dsp_debug & DEBUG_DSP_CMX)
505 printk(KERN_DEBUG "%s checking conference %d\n",
508 if (list_empty(&conf->mlist)) {
509 printk(KERN_ERR "%s: conference whithout members\n",
513 member = list_entry(conf->mlist.next, struct dsp_conf_member, list);
514 same_hfc = member->dsp->features.hfc_id;
515 same_pcm = member->dsp->features.pcm_id;
516 /* check all members in our conference */
517 list_for_each_entry(member, &conf->mlist, list) {
518 /* check if member uses mixing */
519 if (member->dsp->tx_mix) {
520 if (dsp_debug & DEBUG_DSP_CMX)
522 "%s dsp %s cannot form a conf, because "
523 "tx_mix is turned on\n", __func__,
526 list_for_each_entry(member, &conf->mlist, list) {
528 /* remove HFC conference if enabled */
529 if (dsp->hfc_conf >= 0) {
530 if (dsp_debug & DEBUG_DSP_CMX)
532 "%s removing %s from HFC "
533 "conf %d because not "
534 "possible with hardware\n",
538 dsp_cmx_hw_message(dsp,
539 MISDN_CTRL_HFC_CONF_SPLIT,
543 /* remove PCM slot if assigned */
544 if (dsp->pcm_slot_tx >= 0 ||
545 dsp->pcm_slot_rx >= 0) {
546 if (dsp_debug & DEBUG_DSP_CMX)
547 printk(KERN_DEBUG "%s removing "
548 "%s from PCM slot %d (TX)"
549 " slot %d (RX) because not"
550 " possible with hardware\n",
555 dsp_cmx_hw_message(dsp,
556 MISDN_CTRL_HFC_PCM_DISC,
558 dsp->pcm_slot_tx = -1;
559 dsp->pcm_bank_tx = -1;
560 dsp->pcm_slot_rx = -1;
561 dsp->pcm_bank_rx = -1;
568 /* check if member has echo turned on */
569 if (member->dsp->echo.hardware || member->dsp->echo.software) {
570 if (dsp_debug & DEBUG_DSP_CMX)
572 "%s dsp %s cannot form a conf, because "
573 "echo is turned on\n", __func__,
577 /* check if member has tx_mix turned on */
578 if (member->dsp->tx_mix) {
579 if (dsp_debug & DEBUG_DSP_CMX)
581 "%s dsp %s cannot form a conf, because "
582 "tx_mix is turned on\n",
583 __func__, member->dsp->name);
586 /* check if member changes volume at an not suppoted level */
587 if (member->dsp->tx_volume) {
588 if (dsp_debug & DEBUG_DSP_CMX)
590 "%s dsp %s cannot form a conf, because "
591 "tx_volume is changed\n",
592 __func__, member->dsp->name);
595 if (member->dsp->rx_volume) {
596 if (dsp_debug & DEBUG_DSP_CMX)
598 "%s dsp %s cannot form a conf, because "
599 "rx_volume is changed\n",
600 __func__, member->dsp->name);
603 /* check if tx-data turned on */
604 if (member->dsp->tx_data) {
605 if (dsp_debug & DEBUG_DSP_CMX)
607 "%s dsp %s tx_data is turned on\n",
608 __func__, member->dsp->name);
611 /* check if pipeline exists */
612 if (member->dsp->pipeline.inuse) {
613 if (dsp_debug & DEBUG_DSP_CMX)
615 "%s dsp %s cannot form a conf, because "
616 "pipeline exists\n", __func__,
620 /* check if encryption is enabled */
621 if (member->dsp->bf_enable) {
622 if (dsp_debug & DEBUG_DSP_CMX)
623 printk(KERN_DEBUG "%s dsp %s cannot form a "
624 "conf, because encryption is enabled\n",
625 __func__, member->dsp->name);
628 /* check if member is on a card with PCM support */
629 if (member->dsp->features.pcm_id < 0) {
630 if (dsp_debug & DEBUG_DSP_CMX)
632 "%s dsp %s cannot form a conf, because "
633 "dsp has no PCM bus\n",
634 __func__, member->dsp->name);
637 /* check if relations are on the same PCM bus */
638 if (member->dsp->features.pcm_id != same_pcm) {
639 if (dsp_debug & DEBUG_DSP_CMX)
641 "%s dsp %s cannot form a conf, because "
642 "dsp is on a different PCM bus than the "
644 __func__, member->dsp->name);
647 /* determine if members are on the same hfc chip */
648 if (same_hfc != member->dsp->features.hfc_id)
650 /* if there are members already in a conference */
651 if (current_conf < 0 && member->dsp->hfc_conf >= 0)
652 current_conf = member->dsp->hfc_conf;
653 /* if any member is not in a conference */
654 if (member->dsp->hfc_conf < 0)
660 /* if no member, this is an error */
666 if (dsp_debug & DEBUG_DSP_CMX)
668 "%s conf %d cannot form a HW conference, "
669 "because dsp is alone\n", __func__, conf->id);
672 member = list_entry(conf->mlist.next, struct dsp_conf_member,
679 * ok, now we are sure that all members are on the same pcm.
680 * now we will see if we have only two members, so we can do
681 * crossconnections, which don't have any limitations.
684 /* if we have only two members */
686 member = list_entry(conf->mlist.next, struct dsp_conf_member,
688 nextm = list_entry(member->list.next, struct dsp_conf_member,
690 /* remove HFC conference if enabled */
691 if (member->dsp->hfc_conf >= 0) {
692 if (dsp_debug & DEBUG_DSP_CMX)
694 "%s removing %s from HFC conf %d because "
695 "two parties require only a PCM slot\n",
696 __func__, member->dsp->name,
697 member->dsp->hfc_conf);
698 dsp_cmx_hw_message(member->dsp,
699 MISDN_CTRL_HFC_CONF_SPLIT, 0, 0, 0, 0);
700 member->dsp->hfc_conf = -1;
702 if (nextm->dsp->hfc_conf >= 0) {
703 if (dsp_debug & DEBUG_DSP_CMX)
705 "%s removing %s from HFC conf %d because "
706 "two parties require only a PCM slot\n",
707 __func__, nextm->dsp->name,
708 nextm->dsp->hfc_conf);
709 dsp_cmx_hw_message(nextm->dsp,
710 MISDN_CTRL_HFC_CONF_SPLIT, 0, 0, 0, 0);
711 nextm->dsp->hfc_conf = -1;
713 /* if members have two banks (and not on the same chip) */
714 if (member->dsp->features.pcm_banks > 1 &&
715 nextm->dsp->features.pcm_banks > 1 &&
716 member->dsp->features.hfc_id !=
717 nextm->dsp->features.hfc_id) {
718 /* if both members have same slots with crossed banks */
719 if (member->dsp->pcm_slot_tx >= 0 &&
720 member->dsp->pcm_slot_rx >= 0 &&
721 nextm->dsp->pcm_slot_tx >= 0 &&
722 nextm->dsp->pcm_slot_rx >= 0 &&
723 nextm->dsp->pcm_slot_tx ==
724 member->dsp->pcm_slot_rx &&
725 nextm->dsp->pcm_slot_rx ==
726 member->dsp->pcm_slot_tx &&
727 nextm->dsp->pcm_slot_tx ==
728 member->dsp->pcm_slot_tx &&
729 member->dsp->pcm_bank_tx !=
730 member->dsp->pcm_bank_rx &&
731 nextm->dsp->pcm_bank_tx !=
732 nextm->dsp->pcm_bank_rx) {
733 /* all members have same slot */
734 if (dsp_debug & DEBUG_DSP_CMX)
736 "%s dsp %s & %s stay joined on "
737 "PCM slot %d bank %d (TX) bank %d "
738 "(RX) (on different chips)\n",
742 member->dsp->pcm_slot_tx,
743 member->dsp->pcm_bank_tx,
744 member->dsp->pcm_bank_rx);
749 /* find a new slot */
750 memset(freeslots, 1, sizeof(freeslots));
751 list_for_each_entry(dsp, &dsp_ilist, list) {
752 if (dsp != member->dsp &&
754 member->dsp->features.pcm_id ==
755 dsp->features.pcm_id) {
756 if (dsp->pcm_slot_rx >= 0 &&
759 freeslots[dsp->pcm_slot_rx] = 0;
760 if (dsp->pcm_slot_tx >= 0 &&
763 freeslots[dsp->pcm_slot_tx] = 0;
767 ii = member->dsp->features.pcm_slots;
774 if (dsp_debug & DEBUG_DSP_CMX)
776 "%s no slot available for "
777 "%s & %s\n", __func__,
780 /* no more slots available */
783 /* assign free slot */
784 member->dsp->pcm_slot_tx = i;
785 member->dsp->pcm_slot_rx = i;
786 nextm->dsp->pcm_slot_tx = i;
787 nextm->dsp->pcm_slot_rx = i;
788 member->dsp->pcm_bank_rx = 0;
789 member->dsp->pcm_bank_tx = 1;
790 nextm->dsp->pcm_bank_rx = 1;
791 nextm->dsp->pcm_bank_tx = 0;
792 if (dsp_debug & DEBUG_DSP_CMX)
794 "%s adding %s & %s to new PCM slot %d "
795 "(TX and RX on different chips) because "
796 "both members have not same slots\n",
800 member->dsp->pcm_slot_tx);
801 dsp_cmx_hw_message(member->dsp, MISDN_CTRL_HFC_PCM_CONN,
802 member->dsp->pcm_slot_tx, member->dsp->pcm_bank_tx,
803 member->dsp->pcm_slot_rx, member->dsp->pcm_bank_rx);
804 dsp_cmx_hw_message(nextm->dsp, MISDN_CTRL_HFC_PCM_CONN,
805 nextm->dsp->pcm_slot_tx, nextm->dsp->pcm_bank_tx,
806 nextm->dsp->pcm_slot_rx, nextm->dsp->pcm_bank_rx);
808 conf->software = tx_data;
810 /* if members have one bank (or on the same chip) */
812 /* if both members have different crossed slots */
813 if (member->dsp->pcm_slot_tx >= 0 &&
814 member->dsp->pcm_slot_rx >= 0 &&
815 nextm->dsp->pcm_slot_tx >= 0 &&
816 nextm->dsp->pcm_slot_rx >= 0 &&
817 nextm->dsp->pcm_slot_tx ==
818 member->dsp->pcm_slot_rx &&
819 nextm->dsp->pcm_slot_rx ==
820 member->dsp->pcm_slot_tx &&
821 member->dsp->pcm_slot_tx !=
822 member->dsp->pcm_slot_rx &&
823 member->dsp->pcm_bank_tx == 0 &&
824 member->dsp->pcm_bank_rx == 0 &&
825 nextm->dsp->pcm_bank_tx == 0 &&
826 nextm->dsp->pcm_bank_rx == 0) {
827 /* all members have same slot */
828 if (dsp_debug & DEBUG_DSP_CMX)
830 "%s dsp %s & %s stay joined on PCM "
831 "slot %d (TX) %d (RX) on same chip "
832 "or one bank PCM)\n", __func__,
835 member->dsp->pcm_slot_tx,
836 member->dsp->pcm_slot_rx);
841 /* find two new slot */
842 memset(freeslots, 1, sizeof(freeslots));
843 list_for_each_entry(dsp, &dsp_ilist, list) {
844 if (dsp != member->dsp &&
846 member->dsp->features.pcm_id ==
847 dsp->features.pcm_id) {
848 if (dsp->pcm_slot_rx >= 0 &&
851 freeslots[dsp->pcm_slot_rx] = 0;
852 if (dsp->pcm_slot_tx >= 0 &&
855 freeslots[dsp->pcm_slot_tx] = 0;
859 ii = member->dsp->features.pcm_slots;
866 if (dsp_debug & DEBUG_DSP_CMX)
868 "%s no slot available "
869 "for %s & %s\n", __func__,
872 /* no more slots available */
882 if (dsp_debug & DEBUG_DSP_CMX)
884 "%s no slot available "
889 /* no more slots available */
892 /* assign free slots */
893 member->dsp->pcm_slot_tx = i1;
894 member->dsp->pcm_slot_rx = i2;
895 nextm->dsp->pcm_slot_tx = i2;
896 nextm->dsp->pcm_slot_rx = i1;
897 member->dsp->pcm_bank_rx = 0;
898 member->dsp->pcm_bank_tx = 0;
899 nextm->dsp->pcm_bank_rx = 0;
900 nextm->dsp->pcm_bank_tx = 0;
901 if (dsp_debug & DEBUG_DSP_CMX)
903 "%s adding %s & %s to new PCM slot %d "
904 "(TX) %d (RX) on same chip or one bank "
905 "PCM, because both members have not "
906 "crossed slots\n", __func__,
909 member->dsp->pcm_slot_tx,
910 member->dsp->pcm_slot_rx);
911 dsp_cmx_hw_message(member->dsp, MISDN_CTRL_HFC_PCM_CONN,
912 member->dsp->pcm_slot_tx, member->dsp->pcm_bank_tx,
913 member->dsp->pcm_slot_rx, member->dsp->pcm_bank_rx);
914 dsp_cmx_hw_message(nextm->dsp, MISDN_CTRL_HFC_PCM_CONN,
915 nextm->dsp->pcm_slot_tx, nextm->dsp->pcm_bank_tx,
916 nextm->dsp->pcm_slot_rx, nextm->dsp->pcm_bank_rx);
918 conf->software = tx_data;
924 * if we have more than two, we may check if we have a conference
925 * unit available on the chip. also all members must be on the same
928 /* if not the same HFC chip */
930 if (dsp_debug & DEBUG_DSP_CMX)
932 "%s conference %d cannot be formed, because "
933 "members are on different chips or not "
939 /* for more than two members.. */
941 /* if all members already have the same conference */
946 * if there is an existing conference, but not all members have joined
948 if (current_conf >= 0) {
950 list_for_each_entry(member, &conf->mlist, list) {
951 /* if no conference engine on our chip, change to
953 if (!member->dsp->features.hfc_conf)
955 /* in case of hdlc, change to software */
956 if (member->dsp->hdlc)
958 /* join to current conference */
959 if (member->dsp->hfc_conf == current_conf)
961 /* get a free timeslot first */
962 memset(freeslots, 1, sizeof(freeslots));
963 list_for_each_entry(dsp, &dsp_ilist, list) {
965 * not checking current member, because
966 * slot will be overwritten.
969 dsp != member->dsp &&
970 /* dsp must be on the same PCM */
971 member->dsp->features.pcm_id ==
972 dsp->features.pcm_id) {
973 /* dsp must be on a slot */
974 if (dsp->pcm_slot_tx >= 0 &&
977 freeslots[dsp->pcm_slot_tx] = 0;
978 if (dsp->pcm_slot_rx >= 0 &&
981 freeslots[dsp->pcm_slot_rx] = 0;
985 ii = member->dsp->features.pcm_slots;
992 /* no more slots available */
993 if (dsp_debug & DEBUG_DSP_CMX)
995 "%s conference %d cannot be formed,"
996 " because no slot free\n",
1000 if (dsp_debug & DEBUG_DSP_CMX)
1002 "%s changing dsp %s to HW conference "
1003 "%d slot %d\n", __func__,
1004 member->dsp->name, current_conf, i);
1005 /* assign free slot & set PCM & join conf */
1006 member->dsp->pcm_slot_tx = i;
1007 member->dsp->pcm_slot_rx = i;
1008 member->dsp->pcm_bank_tx = 2; /* loop */
1009 member->dsp->pcm_bank_rx = 2;
1010 member->dsp->hfc_conf = current_conf;
1011 dsp_cmx_hw_message(member->dsp, MISDN_CTRL_HFC_PCM_CONN,
1013 dsp_cmx_hw_message(member->dsp,
1014 MISDN_CTRL_HFC_CONF_JOIN, current_conf, 0, 0, 0);
1020 * no member is in a conference yet, so we find a free one
1022 memset(freeunits, 1, sizeof(freeunits));
1023 list_for_each_entry(dsp, &dsp_ilist, list) {
1024 /* dsp must be on the same chip */
1025 if (dsp->features.hfc_id == same_hfc &&
1026 /* dsp must have joined a HW conference */
1027 dsp->hfc_conf >= 0 &&
1028 /* slot must be within range */
1030 freeunits[dsp->hfc_conf] = 0;
1040 /* no more conferences available */
1041 if (dsp_debug & DEBUG_DSP_CMX)
1043 "%s conference %d cannot be formed, because "
1044 "no conference number free\n",
1045 __func__, conf->id);
1048 /* join all members */
1055 * conf_id != 0: join or change conference
1056 * conf_id == 0: split from conference if not already
1059 dsp_cmx_conf(struct dsp *dsp, u32 conf_id)
1062 struct dsp_conf *conf;
1063 struct dsp_conf_member *member;
1065 /* if conference doesn't change */
1066 if (dsp->conf_id == conf_id)
1069 /* first remove us from current conf */
1071 if (dsp_debug & DEBUG_DSP_CMX)
1072 printk(KERN_DEBUG "removing us from conference %d\n",
1074 /* remove us from conf */
1076 err = dsp_cmx_del_conf_member(dsp);
1081 /* update hardware */
1082 dsp_cmx_hardware(NULL, dsp);
1084 /* conf now empty? */
1085 if (list_empty(&conf->mlist)) {
1086 if (dsp_debug & DEBUG_DSP_CMX)
1088 "conference is empty, so we remove it.\n");
1089 err = dsp_cmx_del_conf(conf);
1093 /* update members left on conf */
1094 dsp_cmx_hardware(conf, NULL);
1102 /* now add us to conf */
1103 if (dsp_debug & DEBUG_DSP_CMX)
1104 printk(KERN_DEBUG "searching conference %d\n",
1106 conf = dsp_cmx_search_conf(conf_id);
1108 if (dsp_debug & DEBUG_DSP_CMX)
1110 "conference doesn't exist yet, creating.\n");
1111 /* the conference doesn't exist, so we create */
1112 conf = dsp_cmx_new_conf(conf_id);
1115 } else if (!list_empty(&conf->mlist)) {
1116 member = list_entry(conf->mlist.next, struct dsp_conf_member,
1118 if (dsp->hdlc && !member->dsp->hdlc) {
1119 if (dsp_debug & DEBUG_DSP_CMX)
1121 "cannot join transparent conference.\n");
1124 if (!dsp->hdlc && member->dsp->hdlc) {
1125 if (dsp_debug & DEBUG_DSP_CMX)
1127 "cannot join hdlc conference.\n");
1131 /* add conference member */
1132 err = dsp_cmx_add_conf_member(dsp, conf);
1135 dsp->conf_id = conf_id;
1137 /* if we are alone, we do nothing! */
1138 if (list_empty(&conf->mlist)) {
1139 if (dsp_debug & DEBUG_DSP_CMX)
1141 "we are alone in this conference, so exit.\n");
1142 /* update hardware */
1143 dsp_cmx_hardware(NULL, dsp);
1147 /* update members on conf */
1148 dsp_cmx_hardware(conf, NULL);
1153 #ifdef CMX_DELAY_DEBUG
1156 showdelay(struct dsp *dsp, int samples, int delay)
1158 char bar[] = "--------------------------------------------------|";
1161 delaycount += samples;
1162 if (delaycount < 8000)
1166 sdelay = delay * 50 / (dsp_poll << 2);
1168 printk(KERN_DEBUG "DELAY (%s) %3d >%s\n", dsp->name, delay,
1169 sdelay > 50 ? "..." : bar + 50 - sdelay);
1174 * audio data is received from card
1177 dsp_cmx_receive(struct dsp *dsp, struct sk_buff *skb)
1181 struct mISDNhead *hh = mISDN_HEAD_P(skb);
1184 /* check if we have sompen */
1188 /* half of the buffer should be larger than maximum packet size */
1189 if (len >= CMX_BUFF_HALF) {
1191 "%s line %d: packet from card is too large (%d bytes). "
1192 "please make card send smaller packets OR increase "
1193 "CMX_BUFF_SIZE\n", __FILE__, __LINE__, len);
1198 * initialize pointers if not already -
1199 * also add delay if requested by PH_SIGNAL
1203 if (dsp->features.unordered) {
1204 dsp->rx_R = (hh->id & CMX_BUFF_MASK);
1206 dsp->rx_W = (dsp->rx_R + dsp->cmx_delay)
1209 dsp->rx_W = (dsp->rx_R + (dsp_poll >> 1))
1214 dsp->rx_W = dsp->cmx_delay;
1216 dsp->rx_W = dsp_poll >> 1;
1219 /* if frame contains time code, write directly */
1220 if (dsp->features.unordered) {
1221 dsp->rx_W = (hh->id & CMX_BUFF_MASK);
1222 /* printk(KERN_DEBUG "%s %08x\n", dsp->name, hh->id); */
1225 * if we underrun (or maybe overrun),
1226 * we set our new read pointer, and write silence to buffer
1228 if (((dsp->rx_W-dsp->rx_R) & CMX_BUFF_MASK) >= CMX_BUFF_HALF) {
1229 if (dsp_debug & DEBUG_DSP_CLOCK)
1231 "cmx_receive(dsp=%lx): UNDERRUN (or overrun the "
1232 "maximum delay), adjusting read pointer! "
1233 "(inst %s)\n", (u_long)dsp, dsp->name);
1234 /* flush rx buffer and set delay to dsp_poll / 2 */
1235 if (dsp->features.unordered) {
1236 dsp->rx_R = (hh->id & CMX_BUFF_MASK);
1238 dsp->rx_W = (dsp->rx_R + dsp->cmx_delay)
1241 dsp->rx_W = (dsp->rx_R + (dsp_poll >> 1))
1246 dsp->rx_W = dsp->cmx_delay;
1248 dsp->rx_W = dsp_poll >> 1;
1250 memset(dsp->rx_buff, dsp_silence, sizeof(dsp->rx_buff));
1252 /* if we have reached double delay, jump back to middle */
1254 if (((dsp->rx_W - dsp->rx_R) & CMX_BUFF_MASK) >=
1255 (dsp->cmx_delay << 1)) {
1256 if (dsp_debug & DEBUG_DSP_CLOCK)
1258 "cmx_receive(dsp=%lx): OVERRUN (because "
1259 "twice the delay is reached), adjusting "
1260 "read pointer! (inst %s)\n",
1261 (u_long)dsp, dsp->name);
1263 if (dsp->features.unordered) {
1264 dsp->rx_R = (hh->id & CMX_BUFF_MASK);
1265 dsp->rx_W = (dsp->rx_R + dsp->cmx_delay)
1269 dsp->rx_W = dsp->cmx_delay;
1271 memset(dsp->rx_buff, dsp_silence, sizeof(dsp->rx_buff));
1274 /* show where to write */
1277 "cmx_receive(dsp=%lx): rx_R(dsp)=%05x rx_W(dsp)=%05x len=%d %s\n",
1278 (u_long)dsp, dsp->rx_R, dsp->rx_W, len, dsp->name);
1281 /* write data into rx_buffer */
1288 d[w++ & CMX_BUFF_MASK] = *p++;
1292 /* increase write-pointer */
1293 dsp->rx_W = ((dsp->rx_W + len) & CMX_BUFF_MASK);
1294 #ifdef CMX_DELAY_DEBUG
1295 showdelay(dsp, len, (dsp->rx_W-dsp->rx_R) & CMX_BUFF_MASK);
1301 * send (mixed) audio data to card and control jitter
1304 dsp_cmx_send_member(struct dsp *dsp, int len, s32 *c, int members)
1306 struct dsp_conf *conf = dsp->conf;
1307 struct dsp *member, *other;
1308 register s32 sample;
1309 u8 *d, *p, *q, *o_q;
1310 struct sk_buff *nskb, *txskb;
1311 int r, rr, t, tt, o_r, o_rr;
1313 struct mISDNhead *hh, *thh;
1314 int tx_data_only = 0;
1316 /* don't process if: */
1317 if (!dsp->b_active) { /* if not active */
1321 if (((dsp->conf && dsp->conf->hardware) || /* hardware conf */
1322 dsp->echo.hardware) && /* OR hardware echo */
1323 dsp->tx_R == dsp->tx_W && /* AND no tx-data */
1324 !(dsp->tone.tone && dsp->tone.software)) { /* AND not soft tones */
1325 if (!dsp->tx_data) { /* no tx_data for user space required */
1329 if (dsp->conf && dsp->conf->software && dsp->conf->hardware)
1331 if (dsp->conf->software && dsp->echo.hardware)
1337 "SEND members=%d dsp=%s, conf=%p, rx_R=%05x rx_W=%05x\n",
1338 members, dsp->name, conf, dsp->rx_R, dsp->rx_W);
1341 /* preload if we have delay set */
1342 if (dsp->cmx_delay && !dsp->last_tx) {
1348 /* PREPARE RESULT */
1349 nskb = mI_alloc_skb(len + preload, GFP_ATOMIC);
1352 "FATAL ERROR in mISDN_dsp.o: cannot alloc %d bytes\n",
1356 hh = mISDN_HEAD_P(nskb);
1357 hh->prim = PH_DATA_REQ;
1361 /* set pointers, indexes and stuff */
1363 p = dsp->tx_buff; /* transmit data */
1364 q = dsp->rx_buff; /* received data */
1365 d = skb_put(nskb, preload + len); /* result */
1366 t = dsp->tx_R; /* tx-pointers */
1368 r = dsp->rx_R; /* rx-pointers */
1369 rr = (r + len) & CMX_BUFF_MASK;
1371 /* preload with silence, if required */
1373 memset(d, dsp_silence, preload);
1377 /* PROCESS TONES/TX-DATA ONLY */
1378 if (dsp->tone.tone && dsp->tone.software) {
1380 dsp_tone_copy(dsp, d, len);
1381 dsp->tx_R = 0; /* clear tx buffer */
1385 /* if we have tx-data but do not use mixing */
1386 if (!dsp->tx_mix && t != tt) {
1387 /* -> send tx-data and continue when not enough */
1389 sprintf(debugbuf, "TX sending (%04x-%04x)%p: ", t, tt, p);
1391 while (r != rr && t != tt) {
1393 if (strlen(debugbuf) < 48)
1394 sprintf(debugbuf + strlen(debugbuf), " %02x",
1397 *d++ = p[t]; /* write tx_buff */
1398 t = (t + 1) & CMX_BUFF_MASK;
1399 r = (r + 1) & CMX_BUFF_MASK;
1404 printk(KERN_DEBUG "%s\n", debugbuf);
1410 printk(KERN_DEBUG "%s\n", debugbuf);
1413 /* PROCESS DATA (one member / no conf) */
1414 if (!conf || members <= 1) {
1415 /* -> if echo is NOT enabled */
1416 if (!dsp->echo.software) {
1417 /* -> send tx-data if available or use 0-volume */
1418 while (r != rr && t != tt) {
1419 *d++ = p[t]; /* write tx_buff */
1420 t = (t + 1) & CMX_BUFF_MASK;
1421 r = (r + 1) & CMX_BUFF_MASK;
1424 if (dsp_debug & DEBUG_DSP_CLOCK)
1425 printk(KERN_DEBUG "%s: RX empty\n",
1427 memset(d, dsp_silence, (rr - r) & CMX_BUFF_MASK);
1429 /* -> if echo is enabled */
1432 * -> mix tx-data with echo if available,
1435 while (r != rr && t != tt) {
1436 *d++ = dsp_audio_mix_law[(p[t] << 8) | q[r]];
1437 t = (t + 1) & CMX_BUFF_MASK;
1438 r = (r + 1) & CMX_BUFF_MASK;
1441 *d++ = q[r]; /* echo */
1442 r = (r + 1) & CMX_BUFF_MASK;
1448 /* PROCESS DATA (two members) */
1449 #ifdef CMX_CONF_DEBUG
1454 /* "other" becomes other party */
1455 other = (list_entry(conf->mlist.next,
1456 struct dsp_conf_member, list))->dsp;
1457 if (other == member)
1458 other = (list_entry(conf->mlist.prev,
1459 struct dsp_conf_member, list))->dsp;
1460 o_q = other->rx_buff; /* received data */
1461 o_rr = (other->rx_R + len) & CMX_BUFF_MASK;
1462 /* end of rx-pointer */
1463 o_r = (o_rr - rr + r) & CMX_BUFF_MASK;
1464 /* start rx-pointer at current read position*/
1465 /* -> if echo is NOT enabled */
1466 if (!dsp->echo.software) {
1468 * -> copy other member's rx-data,
1469 * if tx-data is available, mix
1471 while (o_r != o_rr && t != tt) {
1472 *d++ = dsp_audio_mix_law[(p[t] << 8) | o_q[o_r]];
1473 t = (t + 1) & CMX_BUFF_MASK;
1474 o_r = (o_r + 1) & CMX_BUFF_MASK;
1476 while (o_r != o_rr) {
1478 o_r = (o_r + 1) & CMX_BUFF_MASK;
1480 /* -> if echo is enabled */
1483 * -> mix other member's rx-data with echo,
1484 * if tx-data is available, mix
1486 while (r != rr && t != tt) {
1487 sample = dsp_audio_law_to_s32[p[t]] +
1488 dsp_audio_law_to_s32[q[r]] +
1489 dsp_audio_law_to_s32[o_q[o_r]];
1490 if (sample < -32768)
1492 else if (sample > 32767)
1494 *d++ = dsp_audio_s16_to_law[sample & 0xffff];
1495 /* tx-data + rx_data + echo */
1496 t = (t + 1) & CMX_BUFF_MASK;
1497 r = (r + 1) & CMX_BUFF_MASK;
1498 o_r = (o_r + 1) & CMX_BUFF_MASK;
1501 *d++ = dsp_audio_mix_law[(q[r] << 8) | o_q[o_r]];
1502 r = (r + 1) & CMX_BUFF_MASK;
1503 o_r = (o_r + 1) & CMX_BUFF_MASK;
1509 #ifdef DSP_NEVER_DEFINED
1512 /* PROCESS DATA (three or more members) */
1513 /* -> if echo is NOT enabled */
1514 if (!dsp->echo.software) {
1516 * -> subtract rx-data from conf-data,
1517 * if tx-data is available, mix
1519 while (r != rr && t != tt) {
1520 sample = dsp_audio_law_to_s32[p[t]] + *c++ -
1521 dsp_audio_law_to_s32[q[r]];
1522 if (sample < -32768)
1524 else if (sample > 32767)
1526 *d++ = dsp_audio_s16_to_law[sample & 0xffff];
1528 r = (r + 1) & CMX_BUFF_MASK;
1529 t = (t + 1) & CMX_BUFF_MASK;
1532 sample = *c++ - dsp_audio_law_to_s32[q[r]];
1533 if (sample < -32768)
1535 else if (sample > 32767)
1537 *d++ = dsp_audio_s16_to_law[sample & 0xffff];
1539 r = (r + 1) & CMX_BUFF_MASK;
1541 /* -> if echo is enabled */
1544 * -> encode conf-data, if tx-data
1547 while (r != rr && t != tt) {
1548 sample = dsp_audio_law_to_s32[p[t]] + *c++;
1549 if (sample < -32768)
1551 else if (sample > 32767)
1553 *d++ = dsp_audio_s16_to_law[sample & 0xffff];
1555 t = (t + 1) & CMX_BUFF_MASK;
1556 r = (r + 1) & CMX_BUFF_MASK;
1560 if (sample < -32768)
1562 else if (sample > 32767)
1564 *d++ = dsp_audio_s16_to_law[sample & 0xffff];
1566 r = (r + 1) & CMX_BUFF_MASK;
1574 * send tx-data if enabled - don't filter,
1575 * because we want what we send, not what we filtered
1579 hh->prim = DL_DATA_REQ;
1581 /* queue and trigger */
1582 skb_queue_tail(&dsp->sendq, nskb);
1583 schedule_work(&dsp->workq);
1584 /* exit because only tx_data is used */
1587 txskb = mI_alloc_skb(len, GFP_ATOMIC);
1590 "FATAL ERROR in mISDN_dsp.o: "
1591 "cannot alloc %d bytes\n", len);
1593 thh = mISDN_HEAD_P(txskb);
1594 thh->prim = DL_DATA_REQ;
1596 memcpy(skb_put(txskb, len), nskb->data + preload,
1598 /* queue (trigger later) */
1599 skb_queue_tail(&dsp->sendq, txskb);
1604 /* send data only to card, if we don't just calculated tx_data */
1607 dsp_change_volume(nskb, dsp->tx_volume);
1609 if (dsp->pipeline.inuse)
1610 dsp_pipeline_process_tx(&dsp->pipeline, nskb->data,
1614 dsp_bf_encrypt(dsp, nskb->data, nskb->len);
1615 /* queue and trigger */
1616 skb_queue_tail(&dsp->sendq, nskb);
1617 schedule_work(&dsp->workq);
1620 static u32 jittercount; /* counter for jitter check */
1621 struct timer_list dsp_spl_tl;
1622 u32 dsp_spl_jiffies; /* calculate the next time to fire */
1623 static u16 dsp_count; /* last sample count */
1624 static int dsp_count_valid; /* if we have last sample count */
1627 dsp_cmx_send(void *arg)
1629 struct dsp_conf *conf;
1630 struct dsp_conf_member *member;
1632 int mustmix, members;
1633 static s32 mixbuffer[MAX_POLL + 100];
1637 int jittercheck = 0, delay, i;
1642 spin_lock_irqsave(&dsp_lock, flags);
1644 if (!dsp_count_valid) {
1645 dsp_count = mISDN_clock_get();
1647 dsp_count_valid = 1;
1649 count = mISDN_clock_get();
1650 length = count - dsp_count;
1653 if (length > MAX_POLL + 100)
1654 length = MAX_POLL + 100;
1655 /* printk(KERN_DEBUG "len=%d dsp_count=0x%x\n", length, dsp_count); */
1658 * check if jitter needs to be checked (this is every second)
1660 jittercount += length;
1661 if (jittercount >= 8000) {
1662 jittercount -= 8000;
1666 /* loop all members that do not require conference mixing */
1667 list_for_each_entry(dsp, &dsp_ilist, list) {
1674 members = count_list_member(&conf->mlist);
1675 #ifdef CMX_CONF_DEBUG
1676 if (conf->software && members > 1)
1678 if (conf->software && members > 2)
1683 /* transmission required */
1685 dsp_cmx_send_member(dsp, length, mixbuffer, members);
1688 * unused mixbuffer is given to prevent a
1689 * potential null-pointer-bug
1694 /* loop all members that require conference mixing */
1695 list_for_each_entry(conf, &conf_ilist, list) {
1696 /* count members and check hardware */
1697 members = count_list_member(&conf->mlist);
1698 #ifdef CMX_CONF_DEBUG
1699 if (conf->software && members > 1) {
1701 if (conf->software && members > 2) {
1703 /* check for hdlc conf */
1704 member = list_entry(conf->mlist.next,
1705 struct dsp_conf_member, list);
1706 if (member->dsp->hdlc)
1709 memset(mixbuffer, 0, length * sizeof(s32));
1710 list_for_each_entry(member, &conf->mlist, list) {
1712 /* get range of data to mix */
1716 rr = (r + length) & CMX_BUFF_MASK;
1717 /* add member's data */
1719 *c++ += dsp_audio_law_to_s32[q[r]];
1720 r = (r + 1) & CMX_BUFF_MASK;
1724 /* process each member */
1725 list_for_each_entry(member, &conf->mlist, list) {
1727 dsp_cmx_send_member(member->dsp, length,
1728 mixbuffer, members);
1733 /* delete rx-data, increment buffers, change pointers */
1734 list_for_each_entry(dsp, &dsp_ilist, list) {
1740 /* move receive pointer when receiving */
1741 if (!dsp->rx_is_off) {
1742 rr = (r + length) & CMX_BUFF_MASK;
1743 /* delete rx-data */
1746 r = (r + 1) & CMX_BUFF_MASK;
1748 /* increment rx-buffer pointer */
1749 dsp->rx_R = r; /* write incremented read pointer */
1752 /* check current rx_delay */
1753 delay = (dsp->rx_W-dsp->rx_R) & CMX_BUFF_MASK;
1754 if (delay >= CMX_BUFF_HALF)
1755 delay = 0; /* will be the delay before next write */
1756 /* check for lower delay */
1757 if (delay < dsp->rx_delay[0])
1758 dsp->rx_delay[0] = delay;
1759 /* check current tx_delay */
1760 delay = (dsp->tx_W-dsp->tx_R) & CMX_BUFF_MASK;
1761 if (delay >= CMX_BUFF_HALF)
1762 delay = 0; /* will be the delay before next write */
1763 /* check for lower delay */
1764 if (delay < dsp->tx_delay[0])
1765 dsp->tx_delay[0] = delay;
1767 /* find the lowest of all rx_delays */
1768 delay = dsp->rx_delay[0];
1770 while (i < MAX_SECONDS_JITTER_CHECK) {
1771 if (delay > dsp->rx_delay[i])
1772 delay = dsp->rx_delay[i];
1776 * remove rx_delay only if we have delay AND we
1777 * have not preset cmx_delay AND
1778 * the delay is greater dsp_poll
1780 if (delay > dsp_poll && !dsp->cmx_delay) {
1781 if (dsp_debug & DEBUG_DSP_CLOCK)
1783 "%s lowest rx_delay of %d bytes for"
1784 " dsp %s are now removed.\n",
1788 rr = (r + delay - (dsp_poll >> 1))
1790 /* delete rx-data */
1793 r = (r + 1) & CMX_BUFF_MASK;
1795 /* increment rx-buffer pointer */
1797 /* write incremented read pointer */
1799 /* find the lowest of all tx_delays */
1800 delay = dsp->tx_delay[0];
1802 while (i < MAX_SECONDS_JITTER_CHECK) {
1803 if (delay > dsp->tx_delay[i])
1804 delay = dsp->tx_delay[i];
1808 * remove delay only if we have delay AND we
1809 * have enabled tx_dejitter
1811 if (delay > dsp_poll && dsp->tx_dejitter) {
1812 if (dsp_debug & DEBUG_DSP_CLOCK)
1814 "%s lowest tx_delay of %d bytes for"
1815 " dsp %s are now removed.\n",
1819 rr = (r + delay - (dsp_poll >> 1))
1821 /* delete tx-data */
1824 r = (r + 1) & CMX_BUFF_MASK;
1826 /* increment rx-buffer pointer */
1828 /* write incremented read pointer */
1830 /* scroll up delays */
1831 i = MAX_SECONDS_JITTER_CHECK - 1;
1833 dsp->rx_delay[i] = dsp->rx_delay[i - 1];
1834 dsp->tx_delay[i] = dsp->tx_delay[i - 1];
1837 dsp->tx_delay[0] = CMX_BUFF_HALF; /* (infinite) delay */
1838 dsp->rx_delay[0] = CMX_BUFF_HALF; /* (infinite) delay */
1842 /* if next event would be in the past ... */
1843 if ((s32)(dsp_spl_jiffies + dsp_tics-jiffies) <= 0)
1844 dsp_spl_jiffies = jiffies + 1;
1846 dsp_spl_jiffies += dsp_tics;
1848 dsp_spl_tl.expires = dsp_spl_jiffies;
1849 add_timer(&dsp_spl_tl);
1852 spin_unlock_irqrestore(&dsp_lock, flags);
1856 * audio data is transmitted from upper layer to the dsp
1859 dsp_cmx_transmit(struct dsp *dsp, struct sk_buff *skb)
1863 int space; /* todo: , l = skb->len; */
1865 char debugbuf[256] = "";
1868 /* check if there is enough space, and then copy */
1873 space = (ww - w - 1) & CMX_BUFF_MASK;
1874 /* write-pointer should not overrun nor reach read pointer */
1875 if (space < skb->len) {
1876 /* write to the space we have left */
1877 ww = (ww - 1) & CMX_BUFF_MASK; /* end one byte prior tx_R */
1878 if (dsp_debug & DEBUG_DSP_CLOCK)
1879 printk(KERN_DEBUG "%s: TX overflow space=%d skb->len="
1880 "%d, w=0x%04x, ww=0x%04x\n", __func__, space,
1883 /* write until all byte are copied */
1884 ww = (w + skb->len) & CMX_BUFF_MASK;
1887 /* show current buffer */
1890 "cmx_transmit(dsp=%lx) %d bytes to 0x%x-0x%x. %s\n",
1891 (u_long)dsp, (ww - w) & CMX_BUFF_MASK, w, ww, dsp->name);
1894 /* copy transmit data to tx-buffer */
1896 sprintf(debugbuf, "TX getting (%04x-%04x)%p: ", w, ww, p);
1900 if (strlen(debugbuf) < 48)
1901 sprintf(debugbuf + strlen(debugbuf), " %02x", *d);
1904 w = (w + 1) & CMX_BUFF_MASK;
1907 printk(KERN_DEBUG "%s\n", debugbuf);
1913 * hdlc data is received from card and sent to all members.
1916 dsp_cmx_hdlc(struct dsp *dsp, struct sk_buff *skb)
1918 struct sk_buff *nskb = NULL;
1919 struct dsp_conf_member *member;
1920 struct mISDNhead *hh;
1922 /* not if not active */
1926 /* check if we have sompen */
1932 /* in case of software echo */
1933 if (dsp->echo.software) {
1934 nskb = skb_clone(skb, GFP_ATOMIC);
1936 hh = mISDN_HEAD_P(nskb);
1937 hh->prim = PH_DATA_REQ;
1939 skb_queue_tail(&dsp->sendq, nskb);
1940 schedule_work(&dsp->workq);
1945 /* in case of hardware conference */
1946 if (dsp->conf->hardware)
1948 list_for_each_entry(member, &dsp->conf->mlist, list) {
1949 if (dsp->echo.software || member->dsp != dsp) {
1950 nskb = skb_clone(skb, GFP_ATOMIC);
1952 hh = mISDN_HEAD_P(nskb);
1953 hh->prim = PH_DATA_REQ;
1955 skb_queue_tail(&member->dsp->sendq, nskb);
1956 schedule_work(&member->dsp->workq);