2 * lp5523.c - LP5523 LED Driver
4 * Copyright (C) 2010 Nokia Corporation
5 * Copyright (C) 2012 Texas Instruments
7 * Contact: Samu Onkalo <samu.p.onkalo@nokia.com>
8 * Milo(Woogyom) Kim <milo.kim@ti.com>
10 * This program is free software; you can redistribute it and/or
11 * modify it under the terms of the GNU General Public License
12 * version 2 as published by the Free Software Foundation.
14 * This program is distributed in the hope that it will be useful, but
15 * WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
17 * General Public License for more details.
19 * You should have received a copy of the GNU General Public License
20 * along with this program; if not, write to the Free Software
21 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
25 #include <linux/delay.h>
26 #include <linux/firmware.h>
27 #include <linux/i2c.h>
28 #include <linux/init.h>
29 #include <linux/leds.h>
30 #include <linux/module.h>
31 #include <linux/mutex.h>
32 #include <linux/platform_data/leds-lp55xx.h>
33 #include <linux/slab.h>
35 #include "leds-lp55xx-common.h"
37 #define LP5523_PROGRAM_LENGTH 32
38 #define LP5523_MAX_LEDS 9
41 #define LP5523_REG_ENABLE 0x00
42 #define LP5523_REG_OP_MODE 0x01
43 #define LP5523_REG_ENABLE_LEDS_MSB 0x04
44 #define LP5523_REG_ENABLE_LEDS_LSB 0x05
45 #define LP5523_REG_LED_PWM_BASE 0x16
46 #define LP5523_REG_LED_CURRENT_BASE 0x26
47 #define LP5523_REG_CONFIG 0x36
48 #define LP5523_REG_STATUS 0x3A
49 #define LP5523_REG_RESET 0x3D
50 #define LP5523_REG_LED_TEST_CTRL 0x41
51 #define LP5523_REG_LED_TEST_ADC 0x42
52 #define LP5523_REG_CH1_PROG_START 0x4C
53 #define LP5523_REG_CH2_PROG_START 0x4D
54 #define LP5523_REG_CH3_PROG_START 0x4E
55 #define LP5523_REG_PROG_PAGE_SEL 0x4F
56 #define LP5523_REG_PROG_MEM 0x50
58 /* Bit description in registers */
59 #define LP5523_ENABLE 0x40
60 #define LP5523_AUTO_INC 0x40
61 #define LP5523_PWR_SAVE 0x20
62 #define LP5523_PWM_PWR_SAVE 0x04
63 #define LP5523_CP_AUTO 0x18
64 #define LP5523_AUTO_CLK 0x02
66 #define LP5523_EN_LEDTEST 0x80
67 #define LP5523_LEDTEST_DONE 0x80
68 #define LP5523_RESET 0xFF
69 #define LP5523_ADC_SHORTCIRC_LIM 80
70 #define LP5523_EXT_CLK_USED 0x08
71 #define LP5523_ENG_STATUS_MASK 0x07
73 /* Memory Page Selection */
74 #define LP5523_PAGE_ENG1 0
75 #define LP5523_PAGE_ENG2 1
76 #define LP5523_PAGE_ENG3 2
77 #define LP5523_PAGE_MUX1 3
78 #define LP5523_PAGE_MUX2 4
79 #define LP5523_PAGE_MUX3 5
81 /* Program Memory Operations */
82 #define LP5523_MODE_ENG1_M 0x30 /* Operation Mode Register */
83 #define LP5523_MODE_ENG2_M 0x0C
84 #define LP5523_MODE_ENG3_M 0x03
85 #define LP5523_LOAD_ENG1 0x10
86 #define LP5523_LOAD_ENG2 0x04
87 #define LP5523_LOAD_ENG3 0x01
89 #define LP5523_ENG1_IS_LOADING(mode) \
90 ((mode & LP5523_MODE_ENG1_M) == LP5523_LOAD_ENG1)
91 #define LP5523_ENG2_IS_LOADING(mode) \
92 ((mode & LP5523_MODE_ENG2_M) == LP5523_LOAD_ENG2)
93 #define LP5523_ENG3_IS_LOADING(mode) \
94 ((mode & LP5523_MODE_ENG3_M) == LP5523_LOAD_ENG3)
96 #define LP5523_EXEC_ENG1_M 0x30 /* Enable Register */
97 #define LP5523_EXEC_ENG2_M 0x0C
98 #define LP5523_EXEC_ENG3_M 0x03
99 #define LP5523_EXEC_M 0x3F
100 #define LP5523_RUN_ENG1 0x20
101 #define LP5523_RUN_ENG2 0x08
102 #define LP5523_RUN_ENG3 0x02
104 #define LED_ACTIVE(mux, led) (!!(mux & (0x0001 << led)))
106 enum lp5523_chip_id {
111 static int lp5523_init_program_engine(struct lp55xx_chip *chip);
113 static inline void lp5523_wait_opmode_done(void)
115 usleep_range(1000, 2000);
118 static void lp5523_set_led_current(struct lp55xx_led *led, u8 led_current)
120 led->led_current = led_current;
121 lp55xx_write(led->chip, LP5523_REG_LED_CURRENT_BASE + led->chan_nr,
125 static int lp5523_post_init_device(struct lp55xx_chip *chip)
129 ret = lp55xx_write(chip, LP5523_REG_ENABLE, LP5523_ENABLE);
133 /* Chip startup time is 500 us, 1 - 2 ms gives some margin */
134 usleep_range(1000, 2000);
136 ret = lp55xx_write(chip, LP5523_REG_CONFIG,
137 LP5523_AUTO_INC | LP5523_PWR_SAVE |
138 LP5523_CP_AUTO | LP5523_AUTO_CLK |
139 LP5523_PWM_PWR_SAVE);
143 /* turn on all leds */
144 ret = lp55xx_write(chip, LP5523_REG_ENABLE_LEDS_MSB, 0x01);
148 ret = lp55xx_write(chip, LP5523_REG_ENABLE_LEDS_LSB, 0xff);
152 return lp5523_init_program_engine(chip);
155 static void lp5523_load_engine(struct lp55xx_chip *chip)
157 enum lp55xx_engine_index idx = chip->engine_idx;
159 [LP55XX_ENGINE_1] = LP5523_MODE_ENG1_M,
160 [LP55XX_ENGINE_2] = LP5523_MODE_ENG2_M,
161 [LP55XX_ENGINE_3] = LP5523_MODE_ENG3_M,
165 [LP55XX_ENGINE_1] = LP5523_LOAD_ENG1,
166 [LP55XX_ENGINE_2] = LP5523_LOAD_ENG2,
167 [LP55XX_ENGINE_3] = LP5523_LOAD_ENG3,
170 lp55xx_update_bits(chip, LP5523_REG_OP_MODE, mask[idx], val[idx]);
172 lp5523_wait_opmode_done();
175 static void lp5523_load_engine_and_select_page(struct lp55xx_chip *chip)
177 enum lp55xx_engine_index idx = chip->engine_idx;
179 [LP55XX_ENGINE_1] = LP5523_PAGE_ENG1,
180 [LP55XX_ENGINE_2] = LP5523_PAGE_ENG2,
181 [LP55XX_ENGINE_3] = LP5523_PAGE_ENG3,
184 lp5523_load_engine(chip);
186 lp55xx_write(chip, LP5523_REG_PROG_PAGE_SEL, page_sel[idx]);
189 static void lp5523_stop_engine(struct lp55xx_chip *chip)
191 lp55xx_write(chip, LP5523_REG_OP_MODE, 0);
192 lp5523_wait_opmode_done();
195 static void lp5523_turn_off_channels(struct lp55xx_chip *chip)
199 for (i = 0; i < LP5523_MAX_LEDS; i++)
200 lp55xx_write(chip, LP5523_REG_LED_PWM_BASE + i, 0);
203 static void lp5523_run_engine(struct lp55xx_chip *chip, bool start)
211 lp5523_stop_engine(chip);
212 lp5523_turn_off_channels(chip);
218 * operation mode and enable register should updated at the same time
221 ret = lp55xx_read(chip, LP5523_REG_OP_MODE, &mode);
225 ret = lp55xx_read(chip, LP5523_REG_ENABLE, &exec);
229 /* change operation mode to RUN only when each engine is loading */
230 if (LP5523_ENG1_IS_LOADING(mode)) {
231 mode = (mode & ~LP5523_MODE_ENG1_M) | LP5523_RUN_ENG1;
232 exec = (exec & ~LP5523_EXEC_ENG1_M) | LP5523_RUN_ENG1;
235 if (LP5523_ENG2_IS_LOADING(mode)) {
236 mode = (mode & ~LP5523_MODE_ENG2_M) | LP5523_RUN_ENG2;
237 exec = (exec & ~LP5523_EXEC_ENG2_M) | LP5523_RUN_ENG2;
240 if (LP5523_ENG3_IS_LOADING(mode)) {
241 mode = (mode & ~LP5523_MODE_ENG3_M) | LP5523_RUN_ENG3;
242 exec = (exec & ~LP5523_EXEC_ENG3_M) | LP5523_RUN_ENG3;
245 lp55xx_write(chip, LP5523_REG_OP_MODE, mode);
246 lp5523_wait_opmode_done();
248 lp55xx_update_bits(chip, LP5523_REG_ENABLE, LP5523_EXEC_M, exec);
251 static int lp5523_init_program_engine(struct lp55xx_chip *chip)
257 /* one pattern per engine setting LED MUX start and stop addresses */
258 static const u8 pattern[][LP5523_PROGRAM_LENGTH] = {
259 { 0x9c, 0x30, 0x9c, 0xb0, 0x9d, 0x80, 0xd8, 0x00, 0},
260 { 0x9c, 0x40, 0x9c, 0xc0, 0x9d, 0x80, 0xd8, 0x00, 0},
261 { 0x9c, 0x50, 0x9c, 0xd0, 0x9d, 0x80, 0xd8, 0x00, 0},
264 /* hardcode 32 bytes of memory for each engine from program memory */
265 ret = lp55xx_write(chip, LP5523_REG_CH1_PROG_START, 0x00);
269 ret = lp55xx_write(chip, LP5523_REG_CH2_PROG_START, 0x10);
273 ret = lp55xx_write(chip, LP5523_REG_CH3_PROG_START, 0x20);
277 /* write LED MUX address space for each engine */
278 for (i = LP55XX_ENGINE_1; i <= LP55XX_ENGINE_3; i++) {
279 chip->engine_idx = i;
280 lp5523_load_engine_and_select_page(chip);
282 for (j = 0; j < LP5523_PROGRAM_LENGTH; j++) {
283 ret = lp55xx_write(chip, LP5523_REG_PROG_MEM + j,
290 lp5523_run_engine(chip, true);
292 /* Let the programs run for couple of ms and check the engine status */
293 usleep_range(3000, 6000);
294 lp55xx_read(chip, LP5523_REG_STATUS, &status);
295 status &= LP5523_ENG_STATUS_MASK;
297 if (status != LP5523_ENG_STATUS_MASK) {
298 dev_err(&chip->cl->dev,
299 "cound not configure LED engine, status = 0x%.2x\n",
305 lp5523_stop_engine(chip);
309 static int lp5523_update_program_memory(struct lp55xx_chip *chip,
310 const u8 *data, size_t size)
312 u8 pattern[LP5523_PROGRAM_LENGTH] = {0};
320 while ((offset < size - 1) && (i < LP5523_PROGRAM_LENGTH)) {
321 /* separate sscanfs because length is working only for %s */
322 ret = sscanf(data + offset, "%2s%n ", c, &nrchars);
326 ret = sscanf(c, "%2x", &cmd);
330 pattern[i] = (u8)cmd;
335 /* Each instruction is 16bit long. Check that length is even */
339 mutex_lock(&chip->lock);
341 for (i = 0; i < LP5523_PROGRAM_LENGTH; i++) {
342 ret = lp55xx_write(chip, LP5523_REG_PROG_MEM + i, pattern[i]);
344 mutex_unlock(&chip->lock);
349 mutex_unlock(&chip->lock);
354 dev_err(&chip->cl->dev, "wrong pattern format\n");
358 static void lp5523_firmware_loaded(struct lp55xx_chip *chip)
360 const struct firmware *fw = chip->fw;
362 if (fw->size > LP5523_PROGRAM_LENGTH) {
363 dev_err(&chip->cl->dev, "firmware data size overflow: %zu\n",
369 * Program momery sequence
370 * 1) set engine mode to "LOAD"
371 * 2) write firmware data into program memory
374 lp5523_load_engine_and_select_page(chip);
375 lp5523_update_program_memory(chip, fw->data, fw->size);
378 static ssize_t show_engine_mode(struct device *dev,
379 struct device_attribute *attr,
382 struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev));
383 struct lp55xx_chip *chip = led->chip;
384 enum lp55xx_engine_mode mode = chip->engines[nr - 1].mode;
387 case LP55XX_ENGINE_RUN:
388 return sprintf(buf, "run\n");
389 case LP55XX_ENGINE_LOAD:
390 return sprintf(buf, "load\n");
391 case LP55XX_ENGINE_DISABLED:
393 return sprintf(buf, "disabled\n");
400 static ssize_t store_engine_mode(struct device *dev,
401 struct device_attribute *attr,
402 const char *buf, size_t len, int nr)
404 struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev));
405 struct lp55xx_chip *chip = led->chip;
406 struct lp55xx_engine *engine = &chip->engines[nr - 1];
408 mutex_lock(&chip->lock);
410 chip->engine_idx = nr;
412 if (!strncmp(buf, "run", 3)) {
413 lp5523_run_engine(chip, true);
414 engine->mode = LP55XX_ENGINE_RUN;
415 } else if (!strncmp(buf, "load", 4)) {
416 lp5523_stop_engine(chip);
417 lp5523_load_engine(chip);
418 engine->mode = LP55XX_ENGINE_LOAD;
419 } else if (!strncmp(buf, "disabled", 8)) {
420 lp5523_stop_engine(chip);
421 engine->mode = LP55XX_ENGINE_DISABLED;
424 mutex_unlock(&chip->lock);
432 static int lp5523_mux_parse(const char *buf, u16 *mux, size_t len)
437 len = min_t(int, len, LP5523_MAX_LEDS);
439 for (i = 0; i < len; i++) {
458 static void lp5523_mux_to_array(u16 led_mux, char *array)
461 for (i = 0; i < LP5523_MAX_LEDS; i++)
462 pos += sprintf(array + pos, "%x", LED_ACTIVE(led_mux, i));
467 static ssize_t show_engine_leds(struct device *dev,
468 struct device_attribute *attr,
471 struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev));
472 struct lp55xx_chip *chip = led->chip;
473 char mux[LP5523_MAX_LEDS + 1];
475 lp5523_mux_to_array(chip->engines[nr - 1].led_mux, mux);
477 return sprintf(buf, "%s\n", mux);
483 static int lp5523_load_mux(struct lp55xx_chip *chip, u16 mux, int nr)
485 struct lp55xx_engine *engine = &chip->engines[nr - 1];
488 [LP55XX_ENGINE_1] = LP5523_PAGE_MUX1,
489 [LP55XX_ENGINE_2] = LP5523_PAGE_MUX2,
490 [LP55XX_ENGINE_3] = LP5523_PAGE_MUX3,
493 lp5523_load_engine(chip);
495 ret = lp55xx_write(chip, LP5523_REG_PROG_PAGE_SEL, mux_page[nr]);
499 ret = lp55xx_write(chip, LP5523_REG_PROG_MEM , (u8)(mux >> 8));
503 ret = lp55xx_write(chip, LP5523_REG_PROG_MEM + 1, (u8)(mux));
507 engine->led_mux = mux;
511 static ssize_t store_engine_leds(struct device *dev,
512 struct device_attribute *attr,
513 const char *buf, size_t len, int nr)
515 struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev));
516 struct lp55xx_chip *chip = led->chip;
517 struct lp55xx_engine *engine = &chip->engines[nr - 1];
521 if (lp5523_mux_parse(buf, &mux, len))
524 mutex_lock(&chip->lock);
526 chip->engine_idx = nr;
529 if (engine->mode != LP55XX_ENGINE_LOAD)
532 if (lp5523_load_mux(chip, mux, nr))
537 mutex_unlock(&chip->lock);
544 static ssize_t store_engine_load(struct device *dev,
545 struct device_attribute *attr,
546 const char *buf, size_t len, int nr)
548 struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev));
549 struct lp55xx_chip *chip = led->chip;
551 mutex_lock(&chip->lock);
553 chip->engine_idx = nr;
554 lp5523_load_engine_and_select_page(chip);
556 mutex_unlock(&chip->lock);
558 return lp5523_update_program_memory(chip, buf, len);
564 static ssize_t lp5523_selftest(struct device *dev,
565 struct device_attribute *attr,
568 struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev));
569 struct lp55xx_chip *chip = led->chip;
570 struct lp55xx_platform_data *pdata = chip->pdata;
574 mutex_lock(&chip->lock);
576 ret = lp55xx_read(chip, LP5523_REG_STATUS, &status);
580 /* Check that ext clock is really in use if requested */
581 if (pdata->clock_mode == LP55XX_CLOCK_EXT) {
582 if ((status & LP5523_EXT_CLK_USED) == 0)
586 /* Measure VDD (i.e. VBAT) first (channel 16 corresponds to VDD) */
587 lp55xx_write(chip, LP5523_REG_LED_TEST_CTRL, LP5523_EN_LEDTEST | 16);
588 usleep_range(3000, 6000); /* ADC conversion time is typically 2.7 ms */
589 ret = lp55xx_read(chip, LP5523_REG_STATUS, &status);
593 if (!(status & LP5523_LEDTEST_DONE))
594 usleep_range(3000, 6000); /* Was not ready. Wait little bit */
596 ret = lp55xx_read(chip, LP5523_REG_LED_TEST_ADC, &vdd);
600 vdd--; /* There may be some fluctuation in measurement */
602 for (i = 0; i < LP5523_MAX_LEDS; i++) {
603 /* Skip non-existing channels */
604 if (pdata->led_config[i].led_current == 0)
607 /* Set default current */
608 lp55xx_write(chip, LP5523_REG_LED_CURRENT_BASE + i,
609 pdata->led_config[i].led_current);
611 lp55xx_write(chip, LP5523_REG_LED_PWM_BASE + i, 0xff);
612 /* let current stabilize 2 - 4ms before measurements start */
613 usleep_range(2000, 4000);
614 lp55xx_write(chip, LP5523_REG_LED_TEST_CTRL,
615 LP5523_EN_LEDTEST | i);
616 /* ADC conversion time is 2.7 ms typically */
617 usleep_range(3000, 6000);
618 ret = lp55xx_read(chip, LP5523_REG_STATUS, &status);
622 if (!(status & LP5523_LEDTEST_DONE))
623 usleep_range(3000, 6000);/* Was not ready. Wait. */
625 ret = lp55xx_read(chip, LP5523_REG_LED_TEST_ADC, &adc);
629 if (adc >= vdd || adc < LP5523_ADC_SHORTCIRC_LIM)
630 pos += sprintf(buf + pos, "LED %d FAIL\n", i);
632 lp55xx_write(chip, LP5523_REG_LED_PWM_BASE + i, 0x00);
634 /* Restore current */
635 lp55xx_write(chip, LP5523_REG_LED_CURRENT_BASE + i,
640 pos = sprintf(buf, "OK\n");
643 pos = sprintf(buf, "FAIL\n");
646 mutex_unlock(&chip->lock);
651 static void lp5523_led_brightness_work(struct work_struct *work)
653 struct lp55xx_led *led = container_of(work, struct lp55xx_led,
655 struct lp55xx_chip *chip = led->chip;
657 mutex_lock(&chip->lock);
658 lp55xx_write(chip, LP5523_REG_LED_PWM_BASE + led->chan_nr,
660 mutex_unlock(&chip->lock);
663 static LP55XX_DEV_ATTR_RW(engine1_mode, show_engine1_mode, store_engine1_mode);
664 static LP55XX_DEV_ATTR_RW(engine2_mode, show_engine2_mode, store_engine2_mode);
665 static LP55XX_DEV_ATTR_RW(engine3_mode, show_engine3_mode, store_engine3_mode);
666 static LP55XX_DEV_ATTR_RW(engine1_leds, show_engine1_leds, store_engine1_leds);
667 static LP55XX_DEV_ATTR_RW(engine2_leds, show_engine2_leds, store_engine2_leds);
668 static LP55XX_DEV_ATTR_RW(engine3_leds, show_engine3_leds, store_engine3_leds);
669 static LP55XX_DEV_ATTR_WO(engine1_load, store_engine1_load);
670 static LP55XX_DEV_ATTR_WO(engine2_load, store_engine2_load);
671 static LP55XX_DEV_ATTR_WO(engine3_load, store_engine3_load);
672 static LP55XX_DEV_ATTR_RO(selftest, lp5523_selftest);
674 static struct attribute *lp5523_attributes[] = {
675 &dev_attr_engine1_mode.attr,
676 &dev_attr_engine2_mode.attr,
677 &dev_attr_engine3_mode.attr,
678 &dev_attr_engine1_load.attr,
679 &dev_attr_engine2_load.attr,
680 &dev_attr_engine3_load.attr,
681 &dev_attr_engine1_leds.attr,
682 &dev_attr_engine2_leds.attr,
683 &dev_attr_engine3_leds.attr,
684 &dev_attr_selftest.attr,
688 static const struct attribute_group lp5523_group = {
689 .attrs = lp5523_attributes,
692 /* Chip specific configurations */
693 static struct lp55xx_device_config lp5523_cfg = {
695 .addr = LP5523_REG_RESET,
699 .addr = LP5523_REG_ENABLE,
700 .val = LP5523_ENABLE,
702 .max_channel = LP5523_MAX_LEDS,
703 .post_init_device = lp5523_post_init_device,
704 .brightness_work_fn = lp5523_led_brightness_work,
705 .set_led_current = lp5523_set_led_current,
706 .firmware_cb = lp5523_firmware_loaded,
707 .run_engine = lp5523_run_engine,
708 .dev_attr_group = &lp5523_group,
711 static int lp5523_probe(struct i2c_client *client,
712 const struct i2c_device_id *id)
715 struct lp55xx_chip *chip;
716 struct lp55xx_led *led;
717 struct lp55xx_platform_data *pdata;
718 struct device_node *np = client->dev.of_node;
720 if (!dev_get_platdata(&client->dev)) {
722 ret = lp55xx_of_populate_pdata(&client->dev, np);
726 dev_err(&client->dev, "no platform data\n");
730 pdata = dev_get_platdata(&client->dev);
732 chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL);
736 led = devm_kzalloc(&client->dev,
737 sizeof(*led) * pdata->num_channels, GFP_KERNEL);
743 chip->cfg = &lp5523_cfg;
745 mutex_init(&chip->lock);
747 i2c_set_clientdata(client, led);
749 ret = lp55xx_init_device(chip);
753 dev_info(&client->dev, "%s Programmable led chip found\n", id->name);
755 ret = lp55xx_register_leds(led, chip);
757 goto err_register_leds;
759 ret = lp55xx_register_sysfs(chip);
761 dev_err(&client->dev, "registering sysfs failed\n");
762 goto err_register_sysfs;
768 lp55xx_unregister_leds(led, chip);
770 lp55xx_deinit_device(chip);
775 static int lp5523_remove(struct i2c_client *client)
777 struct lp55xx_led *led = i2c_get_clientdata(client);
778 struct lp55xx_chip *chip = led->chip;
780 lp5523_stop_engine(chip);
781 lp55xx_unregister_sysfs(chip);
782 lp55xx_unregister_leds(led, chip);
783 lp55xx_deinit_device(chip);
788 static const struct i2c_device_id lp5523_id[] = {
789 { "lp5523", LP5523 },
790 { "lp55231", LP55231 },
794 MODULE_DEVICE_TABLE(i2c, lp5523_id);
797 static const struct of_device_id of_lp5523_leds_match[] = {
798 { .compatible = "national,lp5523", },
802 MODULE_DEVICE_TABLE(of, of_lp5523_leds_match);
805 static struct i2c_driver lp5523_driver = {
808 .of_match_table = of_match_ptr(of_lp5523_leds_match),
810 .probe = lp5523_probe,
811 .remove = lp5523_remove,
812 .id_table = lp5523_id,
815 module_i2c_driver(lp5523_driver);
817 MODULE_AUTHOR("Mathias Nyman <mathias.nyman@nokia.com>");
818 MODULE_AUTHOR("Milo Kim <milo.kim@ti.com>");
819 MODULE_DESCRIPTION("LP5523 LED engine");
820 MODULE_LICENSE("GPL");