2 * Analog Devices AD9389B/AD9889B video encoder driver
4 * Copyright 2012 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
6 * This program is free software; you may redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; version 2 of the License.
10 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
11 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
12 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
13 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
14 * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
15 * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
16 * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
21 * References (c = chapter, p = page):
22 * REF_01 - Analog Devices, Programming Guide, AD9889B/AD9389B,
23 * HDMI Transitter, Rev. A, October 2010
26 #include <linux/kernel.h>
27 #include <linux/module.h>
28 #include <linux/slab.h>
29 #include <linux/i2c.h>
30 #include <linux/delay.h>
31 #include <linux/videodev2.h>
32 #include <linux/workqueue.h>
33 #include <linux/v4l2-dv-timings.h>
34 #include <media/v4l2-device.h>
35 #include <media/v4l2-chip-ident.h>
36 #include <media/v4l2-common.h>
37 #include <media/v4l2-ctrls.h>
38 #include <media/ad9389b.h>
41 module_param(debug, int, 0644);
42 MODULE_PARM_DESC(debug, "debug level (0-2)");
44 MODULE_DESCRIPTION("Analog Devices AD9389B/AD9889B video encoder driver");
45 MODULE_AUTHOR("Hans Verkuil <hans.verkuil@cisco.com>");
46 MODULE_AUTHOR("Martin Bugge <marbugge@cisco.com>");
47 MODULE_LICENSE("GPL");
49 #define MASK_AD9389B_EDID_RDY_INT 0x04
50 #define MASK_AD9389B_MSEN_INT 0x40
51 #define MASK_AD9389B_HPD_INT 0x80
53 #define MASK_AD9389B_HPD_DETECT 0x40
54 #define MASK_AD9389B_MSEN_DETECT 0x20
55 #define MASK_AD9389B_EDID_RDY 0x10
57 #define EDID_MAX_RETRIES (8)
58 #define EDID_DELAY 250
59 #define EDID_MAX_SEGM 8
62 **********************************************************************
64 * Arrays with configuration parameters for the AD9389B
66 **********************************************************************
69 struct i2c_reg_value {
74 struct ad9389b_state_edid {
75 /* total number of blocks */
77 /* Number of segments read */
79 u8 data[EDID_MAX_SEGM * 256];
80 /* Number of EDID read retries left */
81 unsigned read_retries;
84 struct ad9389b_state {
85 struct ad9389b_platform_data pdata;
86 struct v4l2_subdev sd;
88 struct v4l2_ctrl_handler hdl;
90 /* Is the ad9389b powered on? */
92 /* Did we receive hotplug and rx-sense signals? */
94 /* timings from s_dv_timings */
95 struct v4l2_dv_timings dv_timings;
97 struct v4l2_ctrl *hdmi_mode_ctrl;
98 struct v4l2_ctrl *hotplug_ctrl;
99 struct v4l2_ctrl *rx_sense_ctrl;
100 struct v4l2_ctrl *have_edid0_ctrl;
101 struct v4l2_ctrl *rgb_quantization_range_ctrl;
102 struct i2c_client *edid_i2c_client;
103 struct ad9389b_state_edid edid;
104 /* Running counter of the number of detected EDIDs (for debugging) */
105 unsigned edid_detect_counter;
106 struct workqueue_struct *work_queue;
107 struct delayed_work edid_handler; /* work entry */
110 static void ad9389b_check_monitor_present_status(struct v4l2_subdev *sd);
111 static bool ad9389b_check_edid_status(struct v4l2_subdev *sd);
112 static void ad9389b_setup(struct v4l2_subdev *sd);
113 static int ad9389b_s_i2s_clock_freq(struct v4l2_subdev *sd, u32 freq);
114 static int ad9389b_s_clock_freq(struct v4l2_subdev *sd, u32 freq);
116 static inline struct ad9389b_state *get_ad9389b_state(struct v4l2_subdev *sd)
118 return container_of(sd, struct ad9389b_state, sd);
121 static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl)
123 return &container_of(ctrl->handler, struct ad9389b_state, hdl)->sd;
126 /* ------------------------ I2C ----------------------------------------------- */
128 static int ad9389b_rd(struct v4l2_subdev *sd, u8 reg)
130 struct i2c_client *client = v4l2_get_subdevdata(sd);
132 return i2c_smbus_read_byte_data(client, reg);
135 static int ad9389b_wr(struct v4l2_subdev *sd, u8 reg, u8 val)
137 struct i2c_client *client = v4l2_get_subdevdata(sd);
141 for (i = 0; i < 3; i++) {
142 ret = i2c_smbus_write_byte_data(client, reg, val);
146 v4l2_err(sd, "I2C Write Problem\n");
150 /* To set specific bits in the register, a clear-mask is given (to be AND-ed),
151 and then the value-mask (to be OR-ed). */
152 static inline void ad9389b_wr_and_or(struct v4l2_subdev *sd, u8 reg,
153 u8 clr_mask, u8 val_mask)
155 ad9389b_wr(sd, reg, (ad9389b_rd(sd, reg) & clr_mask) | val_mask);
158 static void ad9389b_edid_rd(struct v4l2_subdev *sd, u16 len, u8 *buf)
160 struct ad9389b_state *state = get_ad9389b_state(sd);
163 v4l2_dbg(1, debug, sd, "%s:\n", __func__);
165 for (i = 0; i < len; i++)
166 buf[i] = i2c_smbus_read_byte_data(state->edid_i2c_client, i);
169 static inline bool ad9389b_have_hotplug(struct v4l2_subdev *sd)
171 return ad9389b_rd(sd, 0x42) & MASK_AD9389B_HPD_DETECT;
174 static inline bool ad9389b_have_rx_sense(struct v4l2_subdev *sd)
176 return ad9389b_rd(sd, 0x42) & MASK_AD9389B_MSEN_DETECT;
179 static void ad9389b_csc_conversion_mode(struct v4l2_subdev *sd, u8 mode)
181 ad9389b_wr_and_or(sd, 0x17, 0xe7, (mode & 0x3)<<3);
182 ad9389b_wr_and_or(sd, 0x18, 0x9f, (mode & 0x3)<<5);
185 static void ad9389b_csc_coeff(struct v4l2_subdev *sd,
186 u16 A1, u16 A2, u16 A3, u16 A4,
187 u16 B1, u16 B2, u16 B3, u16 B4,
188 u16 C1, u16 C2, u16 C3, u16 C4)
191 ad9389b_wr_and_or(sd, 0x18, 0xe0, A1>>8);
192 ad9389b_wr(sd, 0x19, A1);
193 ad9389b_wr_and_or(sd, 0x1A, 0xe0, A2>>8);
194 ad9389b_wr(sd, 0x1B, A2);
195 ad9389b_wr_and_or(sd, 0x1c, 0xe0, A3>>8);
196 ad9389b_wr(sd, 0x1d, A3);
197 ad9389b_wr_and_or(sd, 0x1e, 0xe0, A4>>8);
198 ad9389b_wr(sd, 0x1f, A4);
201 ad9389b_wr_and_or(sd, 0x20, 0xe0, B1>>8);
202 ad9389b_wr(sd, 0x21, B1);
203 ad9389b_wr_and_or(sd, 0x22, 0xe0, B2>>8);
204 ad9389b_wr(sd, 0x23, B2);
205 ad9389b_wr_and_or(sd, 0x24, 0xe0, B3>>8);
206 ad9389b_wr(sd, 0x25, B3);
207 ad9389b_wr_and_or(sd, 0x26, 0xe0, B4>>8);
208 ad9389b_wr(sd, 0x27, B4);
211 ad9389b_wr_and_or(sd, 0x28, 0xe0, C1>>8);
212 ad9389b_wr(sd, 0x29, C1);
213 ad9389b_wr_and_or(sd, 0x2A, 0xe0, C2>>8);
214 ad9389b_wr(sd, 0x2B, C2);
215 ad9389b_wr_and_or(sd, 0x2C, 0xe0, C3>>8);
216 ad9389b_wr(sd, 0x2D, C3);
217 ad9389b_wr_and_or(sd, 0x2E, 0xe0, C4>>8);
218 ad9389b_wr(sd, 0x2F, C4);
221 static void ad9389b_csc_rgb_full2limit(struct v4l2_subdev *sd, bool enable)
226 ad9389b_csc_conversion_mode(sd, csc_mode);
227 ad9389b_csc_coeff(sd,
230 0, 0, 4096-564, 256);
232 ad9389b_wr_and_or(sd, 0x3b, 0xfe, 0x1);
233 /* AVI infoframe: Limited range RGB (16-235) */
234 ad9389b_wr_and_or(sd, 0xcd, 0xf9, 0x02);
237 ad9389b_wr_and_or(sd, 0x3b, 0xfe, 0x0);
238 /* AVI infoframe: Full range RGB (0-255) */
239 ad9389b_wr_and_or(sd, 0xcd, 0xf9, 0x04);
243 static void ad9389b_set_IT_content_AVI_InfoFrame(struct v4l2_subdev *sd)
245 struct ad9389b_state *state = get_ad9389b_state(sd);
247 if (state->dv_timings.bt.standards & V4L2_DV_BT_STD_CEA861) {
248 /* CEA format, not IT */
249 ad9389b_wr_and_or(sd, 0xcd, 0xbf, 0x00);
252 ad9389b_wr_and_or(sd, 0xcd, 0xbf, 0x40);
256 static int ad9389b_set_rgb_quantization_mode(struct v4l2_subdev *sd, struct v4l2_ctrl *ctrl)
258 struct ad9389b_state *state = get_ad9389b_state(sd);
261 case V4L2_DV_RGB_RANGE_AUTO:
263 if (state->dv_timings.bt.standards & V4L2_DV_BT_STD_CEA861) {
264 /* cea format, RGB limited range (16-235) */
265 ad9389b_csc_rgb_full2limit(sd, true);
267 /* not cea format, RGB full range (0-255) */
268 ad9389b_csc_rgb_full2limit(sd, false);
271 case V4L2_DV_RGB_RANGE_LIMITED:
272 /* RGB limited range (16-235) */
273 ad9389b_csc_rgb_full2limit(sd, true);
275 case V4L2_DV_RGB_RANGE_FULL:
276 /* RGB full range (0-255) */
277 ad9389b_csc_rgb_full2limit(sd, false);
285 static void ad9389b_set_manual_pll_gear(struct v4l2_subdev *sd, u32 pixelclock)
289 /* Workaround for TMDS PLL problem
290 * The TMDS PLL in AD9389b change gear when the chip is heated above a
291 * certain temperature. The output is disabled when the PLL change gear
292 * so the monitor has to lock on the signal again. A workaround for
293 * this is to use the manual PLL gears. This is a solution from Analog
294 * Devices that is not documented in the datasheets.
295 * 0x98 [7] = enable manual gearing. 0x98 [6:4] = gear
297 * The pixel frequency ranges are based on readout of the gear the
298 * automatic gearing selects for different pixel clocks
299 * (read from 0x9e [3:1]).
302 if (pixelclock > 140000000)
303 gear = 0xc0; /* 4th gear */
304 else if (pixelclock > 117000000)
305 gear = 0xb0; /* 3rd gear */
306 else if (pixelclock > 87000000)
307 gear = 0xa0; /* 2nd gear */
308 else if (pixelclock > 60000000)
309 gear = 0x90; /* 1st gear */
311 gear = 0x80; /* 0th gear */
313 ad9389b_wr_and_or(sd, 0x98, 0x0f, gear);
316 /* ------------------------------ CTRL OPS ------------------------------ */
318 static int ad9389b_s_ctrl(struct v4l2_ctrl *ctrl)
320 struct v4l2_subdev *sd = to_sd(ctrl);
321 struct ad9389b_state *state = get_ad9389b_state(sd);
323 v4l2_dbg(1, debug, sd,
324 "%s: ctrl id: %d, ctrl->val %d\n", __func__, ctrl->id, ctrl->val);
326 if (state->hdmi_mode_ctrl == ctrl) {
327 /* Set HDMI or DVI-D */
328 ad9389b_wr_and_or(sd, 0xaf, 0xfd,
329 ctrl->val == V4L2_DV_TX_MODE_HDMI ? 0x02 : 0x00);
332 if (state->rgb_quantization_range_ctrl == ctrl)
333 return ad9389b_set_rgb_quantization_mode(sd, ctrl);
337 static const struct v4l2_ctrl_ops ad9389b_ctrl_ops = {
338 .s_ctrl = ad9389b_s_ctrl,
341 /* ---------------------------- CORE OPS ------------------------------------------- */
343 #ifdef CONFIG_VIDEO_ADV_DEBUG
344 static int ad9389b_g_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg)
346 struct i2c_client *client = v4l2_get_subdevdata(sd);
348 if (!v4l2_chip_match_i2c_client(client, ®->match))
350 if (!capable(CAP_SYS_ADMIN))
352 reg->val = ad9389b_rd(sd, reg->reg & 0xff);
357 static int ad9389b_s_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg)
359 struct i2c_client *client = v4l2_get_subdevdata(sd);
361 if (!v4l2_chip_match_i2c_client(client, ®->match))
363 if (!capable(CAP_SYS_ADMIN))
365 ad9389b_wr(sd, reg->reg & 0xff, reg->val & 0xff);
370 static int ad9389b_g_chip_ident(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip)
372 struct i2c_client *client = v4l2_get_subdevdata(sd);
374 return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_AD9389B, 0);
377 static int ad9389b_log_status(struct v4l2_subdev *sd)
379 struct ad9389b_state *state = get_ad9389b_state(sd);
380 struct ad9389b_state_edid *edid = &state->edid;
382 static const char * const states[] = {
388 "initializing HDCP repeater",
389 "6", "7", "8", "9", "A", "B", "C", "D", "E", "F"
391 static const char * const errors[] = {
398 "max repeater cascade exceeded",
401 "9", "A", "B", "C", "D", "E", "F"
406 v4l2_info(sd, "chip revision %d\n", state->chip_revision);
407 v4l2_info(sd, "power %s\n", state->power_on ? "on" : "off");
408 v4l2_info(sd, "%s hotplug, %s Rx Sense, %s EDID (%d block(s))\n",
409 (ad9389b_rd(sd, 0x42) & MASK_AD9389B_HPD_DETECT) ?
411 (ad9389b_rd(sd, 0x42) & MASK_AD9389B_MSEN_DETECT) ?
413 edid->segments ? "found" : "no", edid->blocks);
414 if (state->have_monitor) {
415 v4l2_info(sd, "%s output %s\n",
416 (ad9389b_rd(sd, 0xaf) & 0x02) ?
418 (ad9389b_rd(sd, 0xa1) & 0x3c) ?
419 "disabled" : "enabled");
421 v4l2_info(sd, "ad9389b: %s\n", (ad9389b_rd(sd, 0xb8) & 0x40) ?
422 "encrypted" : "no encryption");
423 v4l2_info(sd, "state: %s, error: %s, detect count: %u, msk/irq: %02x/%02x\n",
424 states[ad9389b_rd(sd, 0xc8) & 0xf],
425 errors[ad9389b_rd(sd, 0xc8) >> 4],
426 state->edid_detect_counter,
427 ad9389b_rd(sd, 0x94), ad9389b_rd(sd, 0x96));
428 manual_gear = ad9389b_rd(sd, 0x98) & 0x80;
429 v4l2_info(sd, "ad9389b: RGB quantization: %s range\n",
430 ad9389b_rd(sd, 0x3b) & 0x01 ? "limited" : "full");
431 v4l2_info(sd, "ad9389b: %s gear %d\n",
432 manual_gear ? "manual" : "automatic",
433 manual_gear ? ((ad9389b_rd(sd, 0x98) & 0x70) >> 4) :
434 ((ad9389b_rd(sd, 0x9e) & 0x0e) >> 1));
435 if (state->have_monitor) {
436 if (ad9389b_rd(sd, 0xaf) & 0x02) {
438 u8 manual_cts = ad9389b_rd(sd, 0x0a) & 0x80;
439 u32 N = (ad9389b_rd(sd, 0x01) & 0xf) << 16 |
440 ad9389b_rd(sd, 0x02) << 8 |
441 ad9389b_rd(sd, 0x03);
442 u8 vic_detect = ad9389b_rd(sd, 0x3e) >> 2;
443 u8 vic_sent = ad9389b_rd(sd, 0x3d) & 0x3f;
447 CTS = (ad9389b_rd(sd, 0x07) & 0xf) << 16 |
448 ad9389b_rd(sd, 0x08) << 8 |
449 ad9389b_rd(sd, 0x09);
451 CTS = (ad9389b_rd(sd, 0x04) & 0xf) << 16 |
452 ad9389b_rd(sd, 0x05) << 8 |
453 ad9389b_rd(sd, 0x06);
454 N = (ad9389b_rd(sd, 0x01) & 0xf) << 16 |
455 ad9389b_rd(sd, 0x02) << 8 |
456 ad9389b_rd(sd, 0x03);
458 v4l2_info(sd, "ad9389b: CTS %s mode: N %d, CTS %d\n",
459 manual_cts ? "manual" : "automatic", N, CTS);
461 v4l2_info(sd, "ad9389b: VIC: detected %d, sent %d\n",
462 vic_detect, vic_sent);
465 if (state->dv_timings.type == V4L2_DV_BT_656_1120) {
466 struct v4l2_bt_timings *bt = bt = &state->dv_timings.bt;
467 u32 frame_width = bt->width + bt->hfrontporch +
468 bt->hsync + bt->hbackporch;
469 u32 frame_height = bt->height + bt->vfrontporch +
470 bt->vsync + bt->vbackporch;
471 u32 frame_size = frame_width * frame_height;
473 v4l2_info(sd, "timings: %ux%u%s%u (%ux%u). Pix freq. = %u Hz. Polarities = 0x%x\n",
474 bt->width, bt->height, bt->interlaced ? "i" : "p",
475 frame_size > 0 ? (unsigned)bt->pixelclock / frame_size : 0,
476 frame_width, frame_height,
477 (unsigned)bt->pixelclock, bt->polarities);
479 v4l2_info(sd, "no timings set\n");
484 /* Power up/down ad9389b */
485 static int ad9389b_s_power(struct v4l2_subdev *sd, int on)
487 struct ad9389b_state *state = get_ad9389b_state(sd);
488 struct ad9389b_platform_data *pdata = &state->pdata;
489 const int retries = 20;
492 v4l2_dbg(1, debug, sd, "%s: power %s\n", __func__, on ? "on" : "off");
494 state->power_on = on;
498 ad9389b_wr_and_or(sd, 0x41, 0xbf, 0x40);
503 /* The ad9389b does not always come up immediately.
504 Retry multiple times. */
505 for (i = 0; i < retries; i++) {
506 ad9389b_wr_and_or(sd, 0x41, 0xbf, 0x0);
507 if ((ad9389b_rd(sd, 0x41) & 0x40) == 0)
509 ad9389b_wr_and_or(sd, 0x41, 0xbf, 0x40);
513 v4l2_dbg(1, debug, sd, "failed to powerup the ad9389b\n");
514 ad9389b_s_power(sd, 0);
518 v4l2_dbg(1, debug, sd,
519 "needed %d retries to powerup the ad9389b\n", i);
521 /* Select chip: AD9389B */
522 ad9389b_wr_and_or(sd, 0xba, 0xef, 0x10);
524 /* Reserved registers that must be set according to REF_01 p. 11*/
525 ad9389b_wr_and_or(sd, 0x98, 0xf0, 0x07);
526 ad9389b_wr(sd, 0x9c, 0x38);
527 ad9389b_wr_and_or(sd, 0x9d, 0xfc, 0x01);
529 /* Differential output drive strength */
530 if (pdata->diff_data_drive_strength > 0)
531 ad9389b_wr(sd, 0xa2, pdata->diff_data_drive_strength);
533 ad9389b_wr(sd, 0xa2, 0x87);
535 if (pdata->diff_clk_drive_strength > 0)
536 ad9389b_wr(sd, 0xa3, pdata->diff_clk_drive_strength);
538 ad9389b_wr(sd, 0xa3, 0x87);
540 ad9389b_wr(sd, 0x0a, 0x01);
541 ad9389b_wr(sd, 0xbb, 0xff);
543 /* Set number of attempts to read the EDID */
544 ad9389b_wr(sd, 0xc9, 0xf);
548 /* Enable interrupts */
549 static void ad9389b_set_isr(struct v4l2_subdev *sd, bool enable)
551 u8 irqs = MASK_AD9389B_HPD_INT | MASK_AD9389B_MSEN_INT;
555 /* The datasheet says that the EDID ready interrupt should be
556 disabled if there is no hotplug. */
559 else if (ad9389b_have_hotplug(sd))
560 irqs |= MASK_AD9389B_EDID_RDY_INT;
563 * This i2c write can fail (approx. 1 in 1000 writes). But it
564 * is essential that this register is correct, so retry it
567 * Note that the i2c write does not report an error, but the readback
568 * clearly shows the wrong value.
571 ad9389b_wr(sd, 0x94, irqs);
572 irqs_rd = ad9389b_rd(sd, 0x94);
573 } while (retries-- && irqs_rd != irqs);
576 v4l2_err(sd, "Could not set interrupts: hw failure?\n");
579 /* Interrupt handler */
580 static int ad9389b_isr(struct v4l2_subdev *sd, u32 status, bool *handled)
584 /* disable interrupts to prevent a race condition */
585 ad9389b_set_isr(sd, false);
586 irq_status = ad9389b_rd(sd, 0x96);
587 /* clear detected interrupts */
588 ad9389b_wr(sd, 0x96, irq_status);
590 if (irq_status & (MASK_AD9389B_HPD_INT | MASK_AD9389B_MSEN_INT))
591 ad9389b_check_monitor_present_status(sd);
592 if (irq_status & MASK_AD9389B_EDID_RDY_INT)
593 ad9389b_check_edid_status(sd);
595 /* enable interrupts */
596 ad9389b_set_isr(sd, true);
601 static const struct v4l2_subdev_core_ops ad9389b_core_ops = {
602 .log_status = ad9389b_log_status,
603 .g_chip_ident = ad9389b_g_chip_ident,
604 #ifdef CONFIG_VIDEO_ADV_DEBUG
605 .g_register = ad9389b_g_register,
606 .s_register = ad9389b_s_register,
608 .s_power = ad9389b_s_power,
609 .interrupt_service_routine = ad9389b_isr,
612 /* ------------------------------ PAD OPS ------------------------------ */
614 static int ad9389b_get_edid(struct v4l2_subdev *sd, struct v4l2_subdev_edid *edid)
616 struct ad9389b_state *state = get_ad9389b_state(sd);
620 if (edid->blocks == 0 || edid->blocks > 256)
624 if (!state->edid.segments) {
625 v4l2_dbg(1, debug, sd, "EDID segment 0 not found\n");
628 if (edid->start_block >= state->edid.segments * 2)
630 if (edid->blocks + edid->start_block >= state->edid.segments * 2)
631 edid->blocks = state->edid.segments * 2 - edid->start_block;
632 memcpy(edid->edid, &state->edid.data[edid->start_block * 128],
637 static const struct v4l2_subdev_pad_ops ad9389b_pad_ops = {
638 .get_edid = ad9389b_get_edid,
641 /* ------------------------------ VIDEO OPS ------------------------------ */
643 /* Enable/disable ad9389b output */
644 static int ad9389b_s_stream(struct v4l2_subdev *sd, int enable)
646 struct ad9389b_state *state = get_ad9389b_state(sd);
648 v4l2_dbg(1, debug, sd, "%s: %sable\n", __func__, (enable ? "en" : "dis"));
650 ad9389b_wr_and_or(sd, 0xa1, ~0x3c, (enable ? 0 : 0x3c));
652 ad9389b_check_monitor_present_status(sd);
654 ad9389b_s_power(sd, 0);
655 state->have_monitor = false;
660 static const struct v4l2_dv_timings ad9389b_timings[] = {
661 V4L2_DV_BT_CEA_720X480P59_94,
662 V4L2_DV_BT_CEA_720X576P50,
663 V4L2_DV_BT_CEA_1280X720P24,
664 V4L2_DV_BT_CEA_1280X720P25,
665 V4L2_DV_BT_CEA_1280X720P30,
666 V4L2_DV_BT_CEA_1280X720P50,
667 V4L2_DV_BT_CEA_1280X720P60,
668 V4L2_DV_BT_CEA_1920X1080P24,
669 V4L2_DV_BT_CEA_1920X1080P25,
670 V4L2_DV_BT_CEA_1920X1080P30,
671 V4L2_DV_BT_CEA_1920X1080P50,
672 V4L2_DV_BT_CEA_1920X1080P60,
674 V4L2_DV_BT_DMT_640X350P85,
675 V4L2_DV_BT_DMT_640X400P85,
676 V4L2_DV_BT_DMT_720X400P85,
677 V4L2_DV_BT_DMT_640X480P60,
678 V4L2_DV_BT_DMT_640X480P72,
679 V4L2_DV_BT_DMT_640X480P75,
680 V4L2_DV_BT_DMT_640X480P85,
681 V4L2_DV_BT_DMT_800X600P56,
682 V4L2_DV_BT_DMT_800X600P60,
683 V4L2_DV_BT_DMT_800X600P72,
684 V4L2_DV_BT_DMT_800X600P75,
685 V4L2_DV_BT_DMT_800X600P85,
686 V4L2_DV_BT_DMT_848X480P60,
687 V4L2_DV_BT_DMT_1024X768P60,
688 V4L2_DV_BT_DMT_1024X768P70,
689 V4L2_DV_BT_DMT_1024X768P75,
690 V4L2_DV_BT_DMT_1024X768P85,
691 V4L2_DV_BT_DMT_1152X864P75,
692 V4L2_DV_BT_DMT_1280X768P60_RB,
693 V4L2_DV_BT_DMT_1280X768P60,
694 V4L2_DV_BT_DMT_1280X768P75,
695 V4L2_DV_BT_DMT_1280X768P85,
696 V4L2_DV_BT_DMT_1280X800P60_RB,
697 V4L2_DV_BT_DMT_1280X800P60,
698 V4L2_DV_BT_DMT_1280X800P75,
699 V4L2_DV_BT_DMT_1280X800P85,
700 V4L2_DV_BT_DMT_1280X960P60,
701 V4L2_DV_BT_DMT_1280X960P85,
702 V4L2_DV_BT_DMT_1280X1024P60,
703 V4L2_DV_BT_DMT_1280X1024P75,
704 V4L2_DV_BT_DMT_1280X1024P85,
705 V4L2_DV_BT_DMT_1360X768P60,
706 V4L2_DV_BT_DMT_1400X1050P60_RB,
707 V4L2_DV_BT_DMT_1400X1050P60,
708 V4L2_DV_BT_DMT_1400X1050P75,
709 V4L2_DV_BT_DMT_1400X1050P85,
710 V4L2_DV_BT_DMT_1440X900P60_RB,
711 V4L2_DV_BT_DMT_1440X900P60,
712 V4L2_DV_BT_DMT_1600X1200P60,
713 V4L2_DV_BT_DMT_1680X1050P60_RB,
714 V4L2_DV_BT_DMT_1680X1050P60,
715 V4L2_DV_BT_DMT_1792X1344P60,
716 V4L2_DV_BT_DMT_1856X1392P60,
717 V4L2_DV_BT_DMT_1920X1200P60_RB,
718 V4L2_DV_BT_DMT_1366X768P60,
719 V4L2_DV_BT_DMT_1920X1080P60,
723 static int ad9389b_s_dv_timings(struct v4l2_subdev *sd,
724 struct v4l2_dv_timings *timings)
726 struct ad9389b_state *state = get_ad9389b_state(sd);
729 v4l2_dbg(1, debug, sd, "%s:\n", __func__);
731 /* quick sanity check */
732 if (timings->type != V4L2_DV_BT_656_1120)
735 if (timings->bt.interlaced)
737 if (timings->bt.pixelclock < 27000000 ||
738 timings->bt.pixelclock > 170000000)
741 /* Fill the optional fields .standards and .flags in struct v4l2_dv_timings
742 if the format is listed in ad9389b_timings[] */
743 for (i = 0; ad9389b_timings[i].bt.width; i++) {
744 if (v4l_match_dv_timings(timings, &ad9389b_timings[i], 0)) {
745 *timings = ad9389b_timings[i];
750 timings->bt.flags &= ~V4L2_DV_FL_REDUCED_FPS;
753 state->dv_timings = *timings;
755 /* update quantization range based on new dv_timings */
756 ad9389b_set_rgb_quantization_mode(sd, state->rgb_quantization_range_ctrl);
758 /* update PLL gear based on new dv_timings */
759 if (state->pdata.tmds_pll_gear == AD9389B_TMDS_PLL_GEAR_SEMI_AUTOMATIC)
760 ad9389b_set_manual_pll_gear(sd, (u32)timings->bt.pixelclock);
762 /* update AVI infoframe */
763 ad9389b_set_IT_content_AVI_InfoFrame(sd);
768 static int ad9389b_g_dv_timings(struct v4l2_subdev *sd,
769 struct v4l2_dv_timings *timings)
771 struct ad9389b_state *state = get_ad9389b_state(sd);
773 v4l2_dbg(1, debug, sd, "%s:\n", __func__);
778 *timings = state->dv_timings;
783 static int ad9389b_enum_dv_timings(struct v4l2_subdev *sd,
784 struct v4l2_enum_dv_timings *timings)
786 if (timings->index >= ARRAY_SIZE(ad9389b_timings))
789 memset(timings->reserved, 0, sizeof(timings->reserved));
790 timings->timings = ad9389b_timings[timings->index];
794 static int ad9389b_dv_timings_cap(struct v4l2_subdev *sd,
795 struct v4l2_dv_timings_cap *cap)
797 cap->type = V4L2_DV_BT_656_1120;
798 cap->bt.max_width = 1920;
799 cap->bt.max_height = 1200;
800 cap->bt.min_pixelclock = 27000000;
801 cap->bt.max_pixelclock = 170000000;
802 cap->bt.standards = V4L2_DV_BT_STD_CEA861 | V4L2_DV_BT_STD_DMT |
803 V4L2_DV_BT_STD_GTF | V4L2_DV_BT_STD_CVT;
804 cap->bt.capabilities = V4L2_DV_BT_CAP_PROGRESSIVE |
805 V4L2_DV_BT_CAP_REDUCED_BLANKING | V4L2_DV_BT_CAP_CUSTOM;
809 static const struct v4l2_subdev_video_ops ad9389b_video_ops = {
810 .s_stream = ad9389b_s_stream,
811 .s_dv_timings = ad9389b_s_dv_timings,
812 .g_dv_timings = ad9389b_g_dv_timings,
813 .enum_dv_timings = ad9389b_enum_dv_timings,
814 .dv_timings_cap = ad9389b_dv_timings_cap,
817 static int ad9389b_s_audio_stream(struct v4l2_subdev *sd, int enable)
819 v4l2_dbg(1, debug, sd, "%s: %sable\n", __func__, (enable ? "en" : "dis"));
822 ad9389b_wr_and_or(sd, 0x45, 0x3f, 0x80);
824 ad9389b_wr_and_or(sd, 0x45, 0x3f, 0x40);
829 static int ad9389b_s_clock_freq(struct v4l2_subdev *sd, u32 freq)
834 case 32000: N = 4096; break;
835 case 44100: N = 6272; break;
836 case 48000: N = 6144; break;
837 case 88200: N = 12544; break;
838 case 96000: N = 12288; break;
839 case 176400: N = 25088; break;
840 case 192000: N = 24576; break;
845 /* Set N (used with CTS to regenerate the audio clock) */
846 ad9389b_wr(sd, 0x01, (N >> 16) & 0xf);
847 ad9389b_wr(sd, 0x02, (N >> 8) & 0xff);
848 ad9389b_wr(sd, 0x03, N & 0xff);
853 static int ad9389b_s_i2s_clock_freq(struct v4l2_subdev *sd, u32 freq)
858 case 32000: i2s_sf = 0x30; break;
859 case 44100: i2s_sf = 0x00; break;
860 case 48000: i2s_sf = 0x20; break;
861 case 88200: i2s_sf = 0x80; break;
862 case 96000: i2s_sf = 0xa0; break;
863 case 176400: i2s_sf = 0xc0; break;
864 case 192000: i2s_sf = 0xe0; break;
869 /* Set sampling frequency for I2S audio to 48 kHz */
870 ad9389b_wr_and_or(sd, 0x15, 0xf, i2s_sf);
875 static int ad9389b_s_routing(struct v4l2_subdev *sd, u32 input, u32 output, u32 config)
877 /* TODO based on input/output/config */
878 /* TODO See datasheet "Programmers guide" p. 39-40 */
880 /* Only 2 channels in use for application */
881 ad9389b_wr_and_or(sd, 0x50, 0x1f, 0x20);
882 /* Speaker mapping */
883 ad9389b_wr(sd, 0x51, 0x00);
885 /* TODO Where should this be placed? */
886 /* 16 bit audio word length */
887 ad9389b_wr_and_or(sd, 0x14, 0xf0, 0x02);
892 static const struct v4l2_subdev_audio_ops ad9389b_audio_ops = {
893 .s_stream = ad9389b_s_audio_stream,
894 .s_clock_freq = ad9389b_s_clock_freq,
895 .s_i2s_clock_freq = ad9389b_s_i2s_clock_freq,
896 .s_routing = ad9389b_s_routing,
899 /* --------------------- SUBDEV OPS --------------------------------------- */
901 static const struct v4l2_subdev_ops ad9389b_ops = {
902 .core = &ad9389b_core_ops,
903 .video = &ad9389b_video_ops,
904 .audio = &ad9389b_audio_ops,
905 .pad = &ad9389b_pad_ops,
908 /* ----------------------------------------------------------------------- */
909 static void ad9389b_dbg_dump_edid(int lvl, int debug, struct v4l2_subdev *sd,
910 int segment, u8 *buf)
917 v4l2_dbg(lvl, debug, sd, "edid segment %d\n", segment);
918 for (i = 0; i < 256; i += 16) {
923 v4l2_dbg(lvl, debug, sd, "\n");
924 for (j = i; j < i + 16; j++) {
925 sprintf(bp, "0x%02x, ", buf[j]);
929 v4l2_dbg(lvl, debug, sd, "%s\n", b);
933 static void ad9389b_edid_handler(struct work_struct *work)
935 struct delayed_work *dwork = to_delayed_work(work);
936 struct ad9389b_state *state = container_of(dwork,
937 struct ad9389b_state, edid_handler);
938 struct v4l2_subdev *sd = &state->sd;
939 struct ad9389b_edid_detect ed;
941 v4l2_dbg(1, debug, sd, "%s:\n", __func__);
943 if (ad9389b_check_edid_status(sd)) {
944 /* Return if we received the EDID. */
948 if (ad9389b_have_hotplug(sd)) {
949 /* We must retry reading the EDID several times, it is possible
950 * that initially the EDID couldn't be read due to i2c errors
951 * (DVI connectors are particularly prone to this problem). */
952 if (state->edid.read_retries) {
953 state->edid.read_retries--;
954 /* EDID read failed, trigger a retry */
955 ad9389b_wr(sd, 0xc9, 0xf);
956 queue_delayed_work(state->work_queue,
957 &state->edid_handler, EDID_DELAY);
962 /* We failed to read the EDID, so send an event for this. */
964 ed.segment = ad9389b_rd(sd, 0xc4);
965 v4l2_subdev_notify(sd, AD9389B_EDID_DETECT, (void *)&ed);
966 v4l2_dbg(1, debug, sd, "%s: no edid found\n", __func__);
969 static void ad9389b_audio_setup(struct v4l2_subdev *sd)
971 v4l2_dbg(1, debug, sd, "%s\n", __func__);
973 ad9389b_s_i2s_clock_freq(sd, 48000);
974 ad9389b_s_clock_freq(sd, 48000);
975 ad9389b_s_routing(sd, 0, 0, 0);
978 /* Initial setup of AD9389b */
980 /* Configure hdmi transmitter. */
981 static void ad9389b_setup(struct v4l2_subdev *sd)
983 struct ad9389b_state *state = get_ad9389b_state(sd);
985 v4l2_dbg(1, debug, sd, "%s\n", __func__);
987 /* Input format: RGB 4:4:4 */
988 ad9389b_wr_and_or(sd, 0x15, 0xf1, 0x0);
989 /* Output format: RGB 4:4:4 */
990 ad9389b_wr_and_or(sd, 0x16, 0x3f, 0x0);
991 /* CSC fixed point: +/-2, 1st order interpolation 4:2:2 -> 4:4:4 up
992 conversion, Aspect ratio: 16:9 */
993 ad9389b_wr_and_or(sd, 0x17, 0xe1, 0x0e);
994 /* Disable pixel repetition and CSC */
995 ad9389b_wr_and_or(sd, 0x3b, 0x9e, 0x0);
996 /* Output format: RGB 4:4:4, Active Format Information is valid. */
997 ad9389b_wr_and_or(sd, 0x45, 0xc7, 0x08);
999 ad9389b_wr_and_or(sd, 0x46, 0x3f, 0x80);
1000 /* Setup video format */
1001 ad9389b_wr(sd, 0x3c, 0x0);
1002 /* Active format aspect ratio: same as picure. */
1003 ad9389b_wr(sd, 0x47, 0x80);
1005 ad9389b_wr_and_or(sd, 0xaf, 0xef, 0x0);
1006 /* Positive clk edge capture for input video clock */
1007 ad9389b_wr_and_or(sd, 0xba, 0x1f, 0x60);
1009 ad9389b_audio_setup(sd);
1011 v4l2_ctrl_handler_setup(&state->hdl);
1013 ad9389b_set_IT_content_AVI_InfoFrame(sd);
1016 static void ad9389b_notify_monitor_detect(struct v4l2_subdev *sd)
1018 struct ad9389b_monitor_detect mdt;
1019 struct ad9389b_state *state = get_ad9389b_state(sd);
1021 mdt.present = state->have_monitor;
1022 v4l2_subdev_notify(sd, AD9389B_MONITOR_DETECT, (void *)&mdt);
1025 static void ad9389b_check_monitor_present_status(struct v4l2_subdev *sd)
1027 struct ad9389b_state *state = get_ad9389b_state(sd);
1028 /* read hotplug and rx-sense state */
1029 u8 status = ad9389b_rd(sd, 0x42);
1031 v4l2_dbg(1, debug, sd, "%s: status: 0x%x%s%s\n",
1034 status & MASK_AD9389B_HPD_DETECT ? ", hotplug" : "",
1035 status & MASK_AD9389B_MSEN_DETECT ? ", rx-sense" : "");
1037 if ((status & MASK_AD9389B_HPD_DETECT) &&
1038 ((status & MASK_AD9389B_MSEN_DETECT) || state->edid.segments)) {
1039 v4l2_dbg(1, debug, sd,
1040 "%s: hotplug and (rx-sense or edid)\n", __func__);
1041 if (!state->have_monitor) {
1042 v4l2_dbg(1, debug, sd, "%s: monitor detected\n", __func__);
1043 state->have_monitor = true;
1044 ad9389b_set_isr(sd, true);
1045 if (!ad9389b_s_power(sd, true)) {
1046 v4l2_dbg(1, debug, sd,
1047 "%s: monitor detected, powerup failed\n", __func__);
1051 ad9389b_notify_monitor_detect(sd);
1052 state->edid.read_retries = EDID_MAX_RETRIES;
1053 queue_delayed_work(state->work_queue,
1054 &state->edid_handler, EDID_DELAY);
1056 } else if (status & MASK_AD9389B_HPD_DETECT) {
1057 v4l2_dbg(1, debug, sd, "%s: hotplug detected\n", __func__);
1058 state->edid.read_retries = EDID_MAX_RETRIES;
1059 queue_delayed_work(state->work_queue,
1060 &state->edid_handler, EDID_DELAY);
1061 } else if (!(status & MASK_AD9389B_HPD_DETECT)) {
1062 v4l2_dbg(1, debug, sd, "%s: hotplug not detected\n", __func__);
1063 if (state->have_monitor) {
1064 v4l2_dbg(1, debug, sd, "%s: monitor not detected\n", __func__);
1065 state->have_monitor = false;
1066 ad9389b_notify_monitor_detect(sd);
1068 ad9389b_s_power(sd, false);
1069 memset(&state->edid, 0, sizeof(struct ad9389b_state_edid));
1072 /* update read only ctrls */
1073 v4l2_ctrl_s_ctrl(state->hotplug_ctrl, ad9389b_have_hotplug(sd) ? 0x1 : 0x0);
1074 v4l2_ctrl_s_ctrl(state->rx_sense_ctrl, ad9389b_have_rx_sense(sd) ? 0x1 : 0x0);
1075 v4l2_ctrl_s_ctrl(state->have_edid0_ctrl, state->edid.segments ? 0x1 : 0x0);
1078 static bool edid_block_verify_crc(u8 *edid_block)
1083 for (i = 0; i < 127; i++)
1084 sum += *(edid_block + i);
1085 return ((255 - sum + 1) == edid_block[127]);
1088 static bool edid_segment_verify_crc(struct v4l2_subdev *sd, u32 segment)
1090 struct ad9389b_state *state = get_ad9389b_state(sd);
1091 u32 blocks = state->edid.blocks;
1092 u8 *data = state->edid.data;
1094 if (edid_block_verify_crc(&data[segment * 256])) {
1095 if ((segment + 1) * 2 <= blocks)
1096 return edid_block_verify_crc(&data[segment * 256 + 128]);
1102 static bool ad9389b_check_edid_status(struct v4l2_subdev *sd)
1104 struct ad9389b_state *state = get_ad9389b_state(sd);
1105 struct ad9389b_edid_detect ed;
1107 u8 edidRdy = ad9389b_rd(sd, 0xc5);
1109 v4l2_dbg(1, debug, sd, "%s: edid ready (retries: %d)\n",
1110 __func__, EDID_MAX_RETRIES - state->edid.read_retries);
1112 if (!(edidRdy & MASK_AD9389B_EDID_RDY))
1115 segment = ad9389b_rd(sd, 0xc4);
1116 if (segment >= EDID_MAX_SEGM) {
1117 v4l2_err(sd, "edid segment number too big\n");
1120 v4l2_dbg(1, debug, sd, "%s: got segment %d\n", __func__, segment);
1121 ad9389b_edid_rd(sd, 256, &state->edid.data[segment * 256]);
1122 ad9389b_dbg_dump_edid(2, debug, sd, segment,
1123 &state->edid.data[segment * 256]);
1125 state->edid.blocks = state->edid.data[0x7e] + 1;
1126 v4l2_dbg(1, debug, sd, "%s: %d blocks in total\n",
1127 __func__, state->edid.blocks);
1129 if (!edid_segment_verify_crc(sd, segment)) {
1130 /* edid crc error, force reread of edid segment */
1131 ad9389b_s_power(sd, false);
1132 ad9389b_s_power(sd, true);
1135 /* one more segment read ok */
1136 state->edid.segments = segment + 1;
1137 if (((state->edid.data[0x7e] >> 1) + 1) > state->edid.segments) {
1138 /* Request next EDID segment */
1139 v4l2_dbg(1, debug, sd, "%s: request segment %d\n",
1140 __func__, state->edid.segments);
1141 ad9389b_wr(sd, 0xc9, 0xf);
1142 ad9389b_wr(sd, 0xc4, state->edid.segments);
1143 state->edid.read_retries = EDID_MAX_RETRIES;
1144 queue_delayed_work(state->work_queue,
1145 &state->edid_handler, EDID_DELAY);
1149 /* report when we have all segments but report only for segment 0 */
1152 v4l2_subdev_notify(sd, AD9389B_EDID_DETECT, (void *)&ed);
1153 state->edid_detect_counter++;
1154 v4l2_ctrl_s_ctrl(state->have_edid0_ctrl, state->edid.segments ? 0x1 : 0x0);
1158 /* ----------------------------------------------------------------------- */
1160 static void ad9389b_init_setup(struct v4l2_subdev *sd)
1162 struct ad9389b_state *state = get_ad9389b_state(sd);
1163 struct ad9389b_state_edid *edid = &state->edid;
1165 v4l2_dbg(1, debug, sd, "%s\n", __func__);
1167 /* clear all interrupts */
1168 ad9389b_wr(sd, 0x96, 0xff);
1170 memset(edid, 0, sizeof(struct ad9389b_state_edid));
1171 state->have_monitor = false;
1172 ad9389b_set_isr(sd, false);
1175 static int ad9389b_probe(struct i2c_client *client, const struct i2c_device_id *id)
1177 const struct v4l2_dv_timings dv1080p60 = V4L2_DV_BT_CEA_1920X1080P60;
1178 struct ad9389b_state *state;
1179 struct ad9389b_platform_data *pdata = client->dev.platform_data;
1180 struct v4l2_ctrl_handler *hdl;
1181 struct v4l2_subdev *sd;
1184 /* Check if the adapter supports the needed features */
1185 if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
1188 v4l_dbg(1, debug, client, "detecting ad9389b client on address 0x%x\n",
1191 state = kzalloc(sizeof(struct ad9389b_state), GFP_KERNEL);
1196 if (pdata == NULL) {
1197 v4l_err(client, "No platform data!\n");
1201 memcpy(&state->pdata, pdata, sizeof(state->pdata));
1204 v4l2_i2c_subdev_init(sd, client, &ad9389b_ops);
1205 sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
1208 v4l2_ctrl_handler_init(hdl, 5);
1210 /* private controls */
1212 state->hdmi_mode_ctrl = v4l2_ctrl_new_std_menu(hdl, &ad9389b_ctrl_ops,
1213 V4L2_CID_DV_TX_MODE, V4L2_DV_TX_MODE_HDMI,
1214 0, V4L2_DV_TX_MODE_DVI_D);
1215 state->hdmi_mode_ctrl->is_private = true;
1216 state->hotplug_ctrl = v4l2_ctrl_new_std(hdl, NULL,
1217 V4L2_CID_DV_TX_HOTPLUG, 0, 1, 0, 0);
1218 state->hotplug_ctrl->is_private = true;
1219 state->rx_sense_ctrl = v4l2_ctrl_new_std(hdl, NULL,
1220 V4L2_CID_DV_TX_RXSENSE, 0, 1, 0, 0);
1221 state->rx_sense_ctrl->is_private = true;
1222 state->have_edid0_ctrl = v4l2_ctrl_new_std(hdl, NULL,
1223 V4L2_CID_DV_TX_EDID_PRESENT, 0, 1, 0, 0);
1224 state->have_edid0_ctrl->is_private = true;
1225 state->rgb_quantization_range_ctrl =
1226 v4l2_ctrl_new_std_menu(hdl, &ad9389b_ctrl_ops,
1227 V4L2_CID_DV_TX_RGB_RANGE, V4L2_DV_RGB_RANGE_FULL,
1228 0, V4L2_DV_RGB_RANGE_AUTO);
1229 state->rgb_quantization_range_ctrl->is_private = true;
1230 sd->ctrl_handler = hdl;
1237 state->pad.flags = MEDIA_PAD_FL_SINK;
1238 err = media_entity_init(&sd->entity, 1, &state->pad, 0);
1242 state->chip_revision = ad9389b_rd(sd, 0x0);
1243 if (state->chip_revision != 2) {
1244 v4l2_err(sd, "chip_revision %d != 2\n", state->chip_revision);
1248 v4l2_dbg(1, debug, sd, "reg 0x41 0x%x, chip version (reg 0x00) 0x%x\n",
1249 ad9389b_rd(sd, 0x41), state->chip_revision);
1251 state->edid_i2c_client = i2c_new_dummy(client->adapter, (0x7e>>1));
1252 if (state->edid_i2c_client == NULL) {
1253 v4l2_err(sd, "failed to register edid i2c client\n");
1257 state->work_queue = create_singlethread_workqueue(sd->name);
1258 if (state->work_queue == NULL) {
1259 v4l2_err(sd, "could not create workqueue\n");
1263 INIT_DELAYED_WORK(&state->edid_handler, ad9389b_edid_handler);
1264 state->dv_timings = dv1080p60;
1266 ad9389b_init_setup(sd);
1267 ad9389b_set_isr(sd, true);
1269 v4l2_info(sd, "%s found @ 0x%x (%s)\n", client->name,
1270 client->addr << 1, client->adapter->name);
1274 i2c_unregister_device(state->edid_i2c_client);
1276 media_entity_cleanup(&sd->entity);
1278 v4l2_ctrl_handler_free(&state->hdl);
1284 /* ----------------------------------------------------------------------- */
1286 static int ad9389b_remove(struct i2c_client *client)
1288 struct v4l2_subdev *sd = i2c_get_clientdata(client);
1289 struct ad9389b_state *state = get_ad9389b_state(sd);
1291 state->chip_revision = -1;
1293 v4l2_dbg(1, debug, sd, "%s removed @ 0x%x (%s)\n", client->name,
1294 client->addr << 1, client->adapter->name);
1296 ad9389b_s_stream(sd, false);
1297 ad9389b_s_audio_stream(sd, false);
1298 ad9389b_init_setup(sd);
1299 cancel_delayed_work(&state->edid_handler);
1300 i2c_unregister_device(state->edid_i2c_client);
1301 destroy_workqueue(state->work_queue);
1302 v4l2_device_unregister_subdev(sd);
1303 media_entity_cleanup(&sd->entity);
1304 v4l2_ctrl_handler_free(sd->ctrl_handler);
1305 kfree(get_ad9389b_state(sd));
1309 /* ----------------------------------------------------------------------- */
1311 static struct i2c_device_id ad9389b_id[] = {
1312 { "ad9389b", V4L2_IDENT_AD9389B },
1313 { "ad9889b", V4L2_IDENT_AD9389B },
1316 MODULE_DEVICE_TABLE(i2c, ad9389b_id);
1318 static struct i2c_driver ad9389b_driver = {
1320 .owner = THIS_MODULE,
1323 .probe = ad9389b_probe,
1324 .remove = ad9389b_remove,
1325 .id_table = ad9389b_id,
1328 module_i2c_driver(ad9389b_driver);