2 * Analog Devices ADV7511 HDMI Transmitter Device Driver
4 * Copyright 2013 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
6 * This program is free software; you may redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; version 2 of the License.
10 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
11 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
12 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
13 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
14 * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
15 * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
16 * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
21 #include <linux/kernel.h>
22 #include <linux/module.h>
23 #include <linux/slab.h>
24 #include <linux/i2c.h>
25 #include <linux/delay.h>
26 #include <linux/videodev2.h>
27 #include <linux/gpio.h>
28 #include <linux/workqueue.h>
29 #include <linux/v4l2-dv-timings.h>
30 #include <media/v4l2-device.h>
31 #include <media/v4l2-common.h>
32 #include <media/v4l2-ctrls.h>
33 #include <media/v4l2-dv-timings.h>
34 #include <media/adv7511.h>
37 module_param(debug, int, 0644);
38 MODULE_PARM_DESC(debug, "debug level (0-2)");
40 MODULE_DESCRIPTION("Analog Devices ADV7511 HDMI Transmitter Device Driver");
41 MODULE_AUTHOR("Hans Verkuil");
42 MODULE_LICENSE("GPL");
44 #define MASK_ADV7511_EDID_RDY_INT 0x04
45 #define MASK_ADV7511_MSEN_INT 0x40
46 #define MASK_ADV7511_HPD_INT 0x80
48 #define MASK_ADV7511_HPD_DETECT 0x40
49 #define MASK_ADV7511_MSEN_DETECT 0x20
50 #define MASK_ADV7511_EDID_RDY 0x10
52 #define EDID_MAX_RETRIES (8)
53 #define EDID_DELAY 250
54 #define EDID_MAX_SEGM 8
56 #define ADV7511_MAX_WIDTH 1920
57 #define ADV7511_MAX_HEIGHT 1200
58 #define ADV7511_MIN_PIXELCLOCK 20000000
59 #define ADV7511_MAX_PIXELCLOCK 225000000
62 **********************************************************************
64 * Arrays with configuration parameters for the ADV7511
66 **********************************************************************
69 struct i2c_reg_value {
74 struct adv7511_state_edid {
75 /* total number of blocks */
77 /* Number of segments read */
79 uint8_t data[EDID_MAX_SEGM * 256];
80 /* Number of EDID read retries left */
81 unsigned read_retries;
85 struct adv7511_state {
86 struct adv7511_platform_data pdata;
87 struct v4l2_subdev sd;
89 struct v4l2_ctrl_handler hdl;
91 uint8_t i2c_edid_addr;
93 /* Is the adv7511 powered on? */
95 /* Did we receive hotplug and rx-sense signals? */
97 /* timings from s_dv_timings */
98 struct v4l2_dv_timings dv_timings;
100 struct v4l2_ctrl *hdmi_mode_ctrl;
101 struct v4l2_ctrl *hotplug_ctrl;
102 struct v4l2_ctrl *rx_sense_ctrl;
103 struct v4l2_ctrl *have_edid0_ctrl;
104 struct v4l2_ctrl *rgb_quantization_range_ctrl;
105 struct i2c_client *i2c_edid;
106 struct adv7511_state_edid edid;
107 /* Running counter of the number of detected EDIDs (for debugging) */
108 unsigned edid_detect_counter;
109 struct workqueue_struct *work_queue;
110 struct delayed_work edid_handler; /* work entry */
113 static void adv7511_check_monitor_present_status(struct v4l2_subdev *sd);
114 static bool adv7511_check_edid_status(struct v4l2_subdev *sd);
115 static void adv7511_setup(struct v4l2_subdev *sd);
116 static int adv7511_s_i2s_clock_freq(struct v4l2_subdev *sd, u32 freq);
117 static int adv7511_s_clock_freq(struct v4l2_subdev *sd, u32 freq);
120 static const struct v4l2_dv_timings_cap adv7511_timings_cap = {
121 .type = V4L2_DV_BT_656_1120,
122 /* keep this initialization for compatibility with GCC < 4.4.6 */
124 V4L2_INIT_BT_TIMINGS(0, ADV7511_MAX_WIDTH, 0, ADV7511_MAX_HEIGHT,
125 ADV7511_MIN_PIXELCLOCK, ADV7511_MAX_PIXELCLOCK,
126 V4L2_DV_BT_STD_CEA861 | V4L2_DV_BT_STD_DMT |
127 V4L2_DV_BT_STD_GTF | V4L2_DV_BT_STD_CVT,
128 V4L2_DV_BT_CAP_PROGRESSIVE | V4L2_DV_BT_CAP_REDUCED_BLANKING |
129 V4L2_DV_BT_CAP_CUSTOM)
132 static inline struct adv7511_state *get_adv7511_state(struct v4l2_subdev *sd)
134 return container_of(sd, struct adv7511_state, sd);
137 static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl)
139 return &container_of(ctrl->handler, struct adv7511_state, hdl)->sd;
142 /* ------------------------ I2C ----------------------------------------------- */
144 static s32 adv_smbus_read_byte_data_check(struct i2c_client *client,
145 u8 command, bool check)
147 union i2c_smbus_data data;
149 if (!i2c_smbus_xfer(client->adapter, client->addr, client->flags,
150 I2C_SMBUS_READ, command,
151 I2C_SMBUS_BYTE_DATA, &data))
154 v4l_err(client, "error reading %02x, %02x\n",
155 client->addr, command);
159 static s32 adv_smbus_read_byte_data(struct i2c_client *client, u8 command)
162 for (i = 0; i < 3; i++) {
163 int ret = adv_smbus_read_byte_data_check(client, command, true);
166 v4l_err(client, "read ok after %d retries\n", i);
170 v4l_err(client, "read failed\n");
174 static int adv7511_rd(struct v4l2_subdev *sd, u8 reg)
176 struct i2c_client *client = v4l2_get_subdevdata(sd);
178 return adv_smbus_read_byte_data(client, reg);
181 static int adv7511_wr(struct v4l2_subdev *sd, u8 reg, u8 val)
183 struct i2c_client *client = v4l2_get_subdevdata(sd);
187 for (i = 0; i < 3; i++) {
188 ret = i2c_smbus_write_byte_data(client, reg, val);
192 v4l2_err(sd, "%s: i2c write error\n", __func__);
196 /* To set specific bits in the register, a clear-mask is given (to be AND-ed),
197 and then the value-mask (to be OR-ed). */
198 static inline void adv7511_wr_and_or(struct v4l2_subdev *sd, u8 reg, uint8_t clr_mask, uint8_t val_mask)
200 adv7511_wr(sd, reg, (adv7511_rd(sd, reg) & clr_mask) | val_mask);
203 static int adv_smbus_read_i2c_block_data(struct i2c_client *client,
204 u8 command, unsigned length, u8 *values)
206 union i2c_smbus_data data;
209 if (length > I2C_SMBUS_BLOCK_MAX)
210 length = I2C_SMBUS_BLOCK_MAX;
211 data.block[0] = length;
213 ret = i2c_smbus_xfer(client->adapter, client->addr, client->flags,
214 I2C_SMBUS_READ, command,
215 I2C_SMBUS_I2C_BLOCK_DATA, &data);
216 memcpy(values, data.block + 1, length);
220 static inline void adv7511_edid_rd(struct v4l2_subdev *sd, uint16_t len, uint8_t *buf)
222 struct adv7511_state *state = get_adv7511_state(sd);
226 v4l2_dbg(1, debug, sd, "%s:\n", __func__);
228 for (i = 0; !err && i < len; i += I2C_SMBUS_BLOCK_MAX)
229 err = adv_smbus_read_i2c_block_data(state->i2c_edid, i,
230 I2C_SMBUS_BLOCK_MAX, buf + i);
232 v4l2_err(sd, "%s: i2c read error\n", __func__);
235 static inline bool adv7511_have_hotplug(struct v4l2_subdev *sd)
237 return adv7511_rd(sd, 0x42) & MASK_ADV7511_HPD_DETECT;
240 static inline bool adv7511_have_rx_sense(struct v4l2_subdev *sd)
242 return adv7511_rd(sd, 0x42) & MASK_ADV7511_MSEN_DETECT;
245 static void adv7511_csc_conversion_mode(struct v4l2_subdev *sd, uint8_t mode)
247 adv7511_wr_and_or(sd, 0x18, 0x9f, (mode & 0x3)<<5);
250 static void adv7511_csc_coeff(struct v4l2_subdev *sd,
251 u16 A1, u16 A2, u16 A3, u16 A4,
252 u16 B1, u16 B2, u16 B3, u16 B4,
253 u16 C1, u16 C2, u16 C3, u16 C4)
256 adv7511_wr_and_or(sd, 0x18, 0xe0, A1>>8);
257 adv7511_wr(sd, 0x19, A1);
258 adv7511_wr_and_or(sd, 0x1A, 0xe0, A2>>8);
259 adv7511_wr(sd, 0x1B, A2);
260 adv7511_wr_and_or(sd, 0x1c, 0xe0, A3>>8);
261 adv7511_wr(sd, 0x1d, A3);
262 adv7511_wr_and_or(sd, 0x1e, 0xe0, A4>>8);
263 adv7511_wr(sd, 0x1f, A4);
266 adv7511_wr_and_or(sd, 0x20, 0xe0, B1>>8);
267 adv7511_wr(sd, 0x21, B1);
268 adv7511_wr_and_or(sd, 0x22, 0xe0, B2>>8);
269 adv7511_wr(sd, 0x23, B2);
270 adv7511_wr_and_or(sd, 0x24, 0xe0, B3>>8);
271 adv7511_wr(sd, 0x25, B3);
272 adv7511_wr_and_or(sd, 0x26, 0xe0, B4>>8);
273 adv7511_wr(sd, 0x27, B4);
276 adv7511_wr_and_or(sd, 0x28, 0xe0, C1>>8);
277 adv7511_wr(sd, 0x29, C1);
278 adv7511_wr_and_or(sd, 0x2A, 0xe0, C2>>8);
279 adv7511_wr(sd, 0x2B, C2);
280 adv7511_wr_and_or(sd, 0x2C, 0xe0, C3>>8);
281 adv7511_wr(sd, 0x2D, C3);
282 adv7511_wr_and_or(sd, 0x2E, 0xe0, C4>>8);
283 adv7511_wr(sd, 0x2F, C4);
286 static void adv7511_csc_rgb_full2limit(struct v4l2_subdev *sd, bool enable)
289 uint8_t csc_mode = 0;
290 adv7511_csc_conversion_mode(sd, csc_mode);
291 adv7511_csc_coeff(sd,
294 0, 0, 4096-564, 256);
296 adv7511_wr_and_or(sd, 0x18, 0x7f, 0x80);
297 /* AVI infoframe: Limited range RGB (16-235) */
298 adv7511_wr_and_or(sd, 0x57, 0xf3, 0x04);
301 adv7511_wr_and_or(sd, 0x18, 0x7f, 0x0);
302 /* AVI infoframe: Full range RGB (0-255) */
303 adv7511_wr_and_or(sd, 0x57, 0xf3, 0x08);
307 static void adv7511_set_IT_content_AVI_InfoFrame(struct v4l2_subdev *sd)
309 struct adv7511_state *state = get_adv7511_state(sd);
310 if (state->dv_timings.bt.standards & V4L2_DV_BT_STD_CEA861) {
311 /* CEA format, not IT */
312 adv7511_wr_and_or(sd, 0x57, 0x7f, 0x00);
315 adv7511_wr_and_or(sd, 0x57, 0x7f, 0x80);
319 static int adv7511_set_rgb_quantization_mode(struct v4l2_subdev *sd, struct v4l2_ctrl *ctrl)
325 case V4L2_DV_RGB_RANGE_AUTO: {
327 struct adv7511_state *state = get_adv7511_state(sd);
329 if (state->dv_timings.bt.standards & V4L2_DV_BT_STD_CEA861) {
330 /* cea format, RGB limited range (16-235) */
331 adv7511_csc_rgb_full2limit(sd, true);
333 /* not cea format, RGB full range (0-255) */
334 adv7511_csc_rgb_full2limit(sd, false);
338 case V4L2_DV_RGB_RANGE_LIMITED:
339 /* RGB limited range (16-235) */
340 adv7511_csc_rgb_full2limit(sd, true);
342 case V4L2_DV_RGB_RANGE_FULL:
343 /* RGB full range (0-255) */
344 adv7511_csc_rgb_full2limit(sd, false);
350 /* ------------------------------ CTRL OPS ------------------------------ */
352 static int adv7511_s_ctrl(struct v4l2_ctrl *ctrl)
354 struct v4l2_subdev *sd = to_sd(ctrl);
355 struct adv7511_state *state = get_adv7511_state(sd);
357 v4l2_dbg(1, debug, sd, "%s: ctrl id: %d, ctrl->val %d\n", __func__, ctrl->id, ctrl->val);
359 if (state->hdmi_mode_ctrl == ctrl) {
360 /* Set HDMI or DVI-D */
361 adv7511_wr_and_or(sd, 0xaf, 0xfd, ctrl->val == V4L2_DV_TX_MODE_HDMI ? 0x02 : 0x00);
364 if (state->rgb_quantization_range_ctrl == ctrl)
365 return adv7511_set_rgb_quantization_mode(sd, ctrl);
370 static const struct v4l2_ctrl_ops adv7511_ctrl_ops = {
371 .s_ctrl = adv7511_s_ctrl,
374 /* ---------------------------- CORE OPS ------------------------------------------- */
376 #ifdef CONFIG_VIDEO_ADV_DEBUG
377 static void adv7511_inv_register(struct v4l2_subdev *sd)
379 v4l2_info(sd, "0x000-0x0ff: Main Map\n");
382 static int adv7511_g_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg)
385 switch (reg->reg >> 8) {
387 reg->val = adv7511_rd(sd, reg->reg & 0xff);
390 v4l2_info(sd, "Register %03llx not supported\n", reg->reg);
391 adv7511_inv_register(sd);
397 static int adv7511_s_register(struct v4l2_subdev *sd, const struct v4l2_dbg_register *reg)
399 switch (reg->reg >> 8) {
401 adv7511_wr(sd, reg->reg & 0xff, reg->val & 0xff);
404 v4l2_info(sd, "Register %03llx not supported\n", reg->reg);
405 adv7511_inv_register(sd);
412 static int adv7511_log_status(struct v4l2_subdev *sd)
414 struct adv7511_state *state = get_adv7511_state(sd);
415 struct adv7511_state_edid *edid = &state->edid;
417 static const char * const states[] = {
423 "initializing HDCP repeater",
424 "6", "7", "8", "9", "A", "B", "C", "D", "E", "F"
426 static const char * const errors[] = {
433 "max repeater cascade exceeded",
436 "9", "A", "B", "C", "D", "E", "F"
439 v4l2_info(sd, "power %s\n", state->power_on ? "on" : "off");
440 v4l2_info(sd, "%s hotplug, %s Rx Sense, %s EDID (%d block(s))\n",
441 (adv7511_rd(sd, 0x42) & MASK_ADV7511_HPD_DETECT) ? "detected" : "no",
442 (adv7511_rd(sd, 0x42) & MASK_ADV7511_MSEN_DETECT) ? "detected" : "no",
443 edid->segments ? "found" : "no",
445 v4l2_info(sd, "%s output %s\n",
446 (adv7511_rd(sd, 0xaf) & 0x02) ?
448 (adv7511_rd(sd, 0xa1) & 0x3c) ?
449 "disabled" : "enabled");
450 v4l2_info(sd, "state: %s, error: %s, detect count: %u, msk/irq: %02x/%02x\n",
451 states[adv7511_rd(sd, 0xc8) & 0xf],
452 errors[adv7511_rd(sd, 0xc8) >> 4], state->edid_detect_counter,
453 adv7511_rd(sd, 0x94), adv7511_rd(sd, 0x96));
454 v4l2_info(sd, "RGB quantization: %s range\n", adv7511_rd(sd, 0x18) & 0x80 ? "limited" : "full");
455 if (adv7511_rd(sd, 0xaf) & 0x02) {
457 u8 manual_cts = adv7511_rd(sd, 0x0a) & 0x80;
458 u32 N = (adv7511_rd(sd, 0x01) & 0xf) << 16 |
459 adv7511_rd(sd, 0x02) << 8 |
460 adv7511_rd(sd, 0x03);
461 u8 vic_detect = adv7511_rd(sd, 0x3e) >> 2;
462 u8 vic_sent = adv7511_rd(sd, 0x3d) & 0x3f;
466 CTS = (adv7511_rd(sd, 0x07) & 0xf) << 16 |
467 adv7511_rd(sd, 0x08) << 8 |
468 adv7511_rd(sd, 0x09);
470 CTS = (adv7511_rd(sd, 0x04) & 0xf) << 16 |
471 adv7511_rd(sd, 0x05) << 8 |
472 adv7511_rd(sd, 0x06);
473 v4l2_info(sd, "CTS %s mode: N %d, CTS %d\n",
474 manual_cts ? "manual" : "automatic", N, CTS);
475 v4l2_info(sd, "VIC: detected %d, sent %d\n",
476 vic_detect, vic_sent);
478 if (state->dv_timings.type == V4L2_DV_BT_656_1120)
479 v4l2_print_dv_timings(sd->name, "timings: ",
480 &state->dv_timings, false);
482 v4l2_info(sd, "no timings set\n");
483 v4l2_info(sd, "i2c edid addr: 0x%x\n", state->i2c_edid_addr);
484 v4l2_info(sd, "i2c cec addr: 0x%x\n", state->i2c_cec_addr);
488 /* Power up/down adv7511 */
489 static int adv7511_s_power(struct v4l2_subdev *sd, int on)
491 struct adv7511_state *state = get_adv7511_state(sd);
492 const int retries = 20;
495 v4l2_dbg(1, debug, sd, "%s: power %s\n", __func__, on ? "on" : "off");
497 state->power_on = on;
501 adv7511_wr_and_or(sd, 0x41, 0xbf, 0x40);
506 /* The adv7511 does not always come up immediately.
507 Retry multiple times. */
508 for (i = 0; i < retries; i++) {
509 adv7511_wr_and_or(sd, 0x41, 0xbf, 0x0);
510 if ((adv7511_rd(sd, 0x41) & 0x40) == 0)
512 adv7511_wr_and_or(sd, 0x41, 0xbf, 0x40);
516 v4l2_dbg(1, debug, sd, "%s: failed to powerup the adv7511!\n", __func__);
517 adv7511_s_power(sd, 0);
521 v4l2_dbg(1, debug, sd, "%s: needed %d retries to powerup the adv7511\n", __func__, i);
523 /* Reserved registers that must be set */
524 adv7511_wr(sd, 0x98, 0x03);
525 adv7511_wr_and_or(sd, 0x9a, 0xfe, 0x70);
526 adv7511_wr(sd, 0x9c, 0x30);
527 adv7511_wr_and_or(sd, 0x9d, 0xfc, 0x01);
528 adv7511_wr(sd, 0xa2, 0xa4);
529 adv7511_wr(sd, 0xa3, 0xa4);
530 adv7511_wr(sd, 0xe0, 0xd0);
531 adv7511_wr(sd, 0xf9, 0x00);
533 adv7511_wr(sd, 0x43, state->i2c_edid_addr);
535 /* Set number of attempts to read the EDID */
536 adv7511_wr(sd, 0xc9, 0xf);
540 /* Enable interrupts */
541 static void adv7511_set_isr(struct v4l2_subdev *sd, bool enable)
543 uint8_t irqs = MASK_ADV7511_HPD_INT | MASK_ADV7511_MSEN_INT;
547 v4l2_dbg(2, debug, sd, "%s: %s\n", __func__, enable ? "enable" : "disable");
549 /* The datasheet says that the EDID ready interrupt should be
550 disabled if there is no hotplug. */
553 else if (adv7511_have_hotplug(sd))
554 irqs |= MASK_ADV7511_EDID_RDY_INT;
557 * This i2c write can fail (approx. 1 in 1000 writes). But it
558 * is essential that this register is correct, so retry it
561 * Note that the i2c write does not report an error, but the readback
562 * clearly shows the wrong value.
565 adv7511_wr(sd, 0x94, irqs);
566 irqs_rd = adv7511_rd(sd, 0x94);
567 } while (retries-- && irqs_rd != irqs);
571 v4l2_err(sd, "Could not set interrupts: hw failure?\n");
574 /* Interrupt handler */
575 static int adv7511_isr(struct v4l2_subdev *sd, u32 status, bool *handled)
579 /* disable interrupts to prevent a race condition */
580 adv7511_set_isr(sd, false);
581 irq_status = adv7511_rd(sd, 0x96);
582 /* clear detected interrupts */
583 adv7511_wr(sd, 0x96, irq_status);
585 v4l2_dbg(1, debug, sd, "%s: irq 0x%x\n", __func__, irq_status);
587 if (irq_status & (MASK_ADV7511_HPD_INT | MASK_ADV7511_MSEN_INT))
588 adv7511_check_monitor_present_status(sd);
589 if (irq_status & MASK_ADV7511_EDID_RDY_INT)
590 adv7511_check_edid_status(sd);
592 /* enable interrupts */
593 adv7511_set_isr(sd, true);
600 static int adv7511_get_edid(struct v4l2_subdev *sd, struct v4l2_subdev_edid *edid)
602 struct adv7511_state *state = get_adv7511_state(sd);
606 if ((edid->blocks == 0) || (edid->blocks > 256))
610 if (!state->edid.segments) {
611 v4l2_dbg(1, debug, sd, "EDID segment 0 not found\n");
614 if (edid->start_block >= state->edid.segments * 2)
616 if ((edid->blocks + edid->start_block) >= state->edid.segments * 2)
617 edid->blocks = state->edid.segments * 2 - edid->start_block;
619 memcpy(edid->edid, &state->edid.data[edid->start_block * 128],
624 static const struct v4l2_subdev_pad_ops adv7511_pad_ops = {
625 .get_edid = adv7511_get_edid,
628 static const struct v4l2_subdev_core_ops adv7511_core_ops = {
629 .log_status = adv7511_log_status,
630 #ifdef CONFIG_VIDEO_ADV_DEBUG
631 .g_register = adv7511_g_register,
632 .s_register = adv7511_s_register,
634 .s_power = adv7511_s_power,
635 .interrupt_service_routine = adv7511_isr,
638 /* ------------------------------ VIDEO OPS ------------------------------ */
640 /* Enable/disable adv7511 output */
641 static int adv7511_s_stream(struct v4l2_subdev *sd, int enable)
643 struct adv7511_state *state = get_adv7511_state(sd);
645 v4l2_dbg(1, debug, sd, "%s: %sable\n", __func__, (enable ? "en" : "dis"));
646 adv7511_wr_and_or(sd, 0xa1, ~0x3c, (enable ? 0 : 0x3c));
648 adv7511_check_monitor_present_status(sd);
650 adv7511_s_power(sd, 0);
651 state->have_monitor = false;
656 static int adv7511_s_dv_timings(struct v4l2_subdev *sd,
657 struct v4l2_dv_timings *timings)
659 struct adv7511_state *state = get_adv7511_state(sd);
661 v4l2_dbg(1, debug, sd, "%s:\n", __func__);
663 /* quick sanity check */
664 if (!v4l2_valid_dv_timings(timings, &adv7511_timings_cap, NULL, NULL))
667 /* Fill the optional fields .standards and .flags in struct v4l2_dv_timings
668 if the format is one of the CEA or DMT timings. */
669 v4l2_find_dv_timings_cap(timings, &adv7511_timings_cap, 0, NULL, NULL);
671 timings->bt.flags &= ~V4L2_DV_FL_REDUCED_FPS;
674 state->dv_timings = *timings;
676 /* update quantization range based on new dv_timings */
677 adv7511_set_rgb_quantization_mode(sd, state->rgb_quantization_range_ctrl);
679 /* update AVI infoframe */
680 adv7511_set_IT_content_AVI_InfoFrame(sd);
685 static int adv7511_g_dv_timings(struct v4l2_subdev *sd,
686 struct v4l2_dv_timings *timings)
688 struct adv7511_state *state = get_adv7511_state(sd);
690 v4l2_dbg(1, debug, sd, "%s:\n", __func__);
695 *timings = state->dv_timings;
700 static int adv7511_enum_dv_timings(struct v4l2_subdev *sd,
701 struct v4l2_enum_dv_timings *timings)
703 return v4l2_enum_dv_timings_cap(timings, &adv7511_timings_cap, NULL, NULL);
706 static int adv7511_dv_timings_cap(struct v4l2_subdev *sd,
707 struct v4l2_dv_timings_cap *cap)
709 *cap = adv7511_timings_cap;
713 static const struct v4l2_subdev_video_ops adv7511_video_ops = {
714 .s_stream = adv7511_s_stream,
715 .s_dv_timings = adv7511_s_dv_timings,
716 .g_dv_timings = adv7511_g_dv_timings,
717 .enum_dv_timings = adv7511_enum_dv_timings,
718 .dv_timings_cap = adv7511_dv_timings_cap,
721 /* ------------------------------ AUDIO OPS ------------------------------ */
722 static int adv7511_s_audio_stream(struct v4l2_subdev *sd, int enable)
724 v4l2_dbg(1, debug, sd, "%s: %sable\n", __func__, (enable ? "en" : "dis"));
727 adv7511_wr_and_or(sd, 0x4b, 0x3f, 0x80);
729 adv7511_wr_and_or(sd, 0x4b, 0x3f, 0x40);
734 static int adv7511_s_clock_freq(struct v4l2_subdev *sd, u32 freq)
739 case 32000: N = 4096; break;
740 case 44100: N = 6272; break;
741 case 48000: N = 6144; break;
742 case 88200: N = 12544; break;
743 case 96000: N = 12288; break;
744 case 176400: N = 25088; break;
745 case 192000: N = 24576; break;
750 /* Set N (used with CTS to regenerate the audio clock) */
751 adv7511_wr(sd, 0x01, (N >> 16) & 0xf);
752 adv7511_wr(sd, 0x02, (N >> 8) & 0xff);
753 adv7511_wr(sd, 0x03, N & 0xff);
758 static int adv7511_s_i2s_clock_freq(struct v4l2_subdev *sd, u32 freq)
763 case 32000: i2s_sf = 0x30; break;
764 case 44100: i2s_sf = 0x00; break;
765 case 48000: i2s_sf = 0x20; break;
766 case 88200: i2s_sf = 0x80; break;
767 case 96000: i2s_sf = 0xa0; break;
768 case 176400: i2s_sf = 0xc0; break;
769 case 192000: i2s_sf = 0xe0; break;
774 /* Set sampling frequency for I2S audio to 48 kHz */
775 adv7511_wr_and_or(sd, 0x15, 0xf, i2s_sf);
780 static int adv7511_s_routing(struct v4l2_subdev *sd, u32 input, u32 output, u32 config)
782 /* Only 2 channels in use for application */
783 adv7511_wr_and_or(sd, 0x73, 0xf8, 0x1);
784 /* Speaker mapping */
785 adv7511_wr(sd, 0x76, 0x00);
787 /* 16 bit audio word length */
788 adv7511_wr_and_or(sd, 0x14, 0xf0, 0x02);
793 static const struct v4l2_subdev_audio_ops adv7511_audio_ops = {
794 .s_stream = adv7511_s_audio_stream,
795 .s_clock_freq = adv7511_s_clock_freq,
796 .s_i2s_clock_freq = adv7511_s_i2s_clock_freq,
797 .s_routing = adv7511_s_routing,
800 /* --------------------- SUBDEV OPS --------------------------------------- */
802 static const struct v4l2_subdev_ops adv7511_ops = {
803 .core = &adv7511_core_ops,
804 .pad = &adv7511_pad_ops,
805 .video = &adv7511_video_ops,
806 .audio = &adv7511_audio_ops,
809 /* ----------------------------------------------------------------------- */
810 static void adv7511_dbg_dump_edid(int lvl, int debug, struct v4l2_subdev *sd, int segment, uint8_t *buf)
814 v4l2_dbg(lvl, debug, sd, "edid segment %d\n", segment);
815 for (i = 0; i < 256; i += 16) {
819 v4l2_dbg(lvl, debug, sd, "\n");
820 for (j = i; j < i + 16; j++) {
821 sprintf(bp, "0x%02x, ", buf[j]);
825 v4l2_dbg(lvl, debug, sd, "%s\n", b);
830 static void adv7511_edid_handler(struct work_struct *work)
832 struct delayed_work *dwork = to_delayed_work(work);
833 struct adv7511_state *state = container_of(dwork, struct adv7511_state, edid_handler);
834 struct v4l2_subdev *sd = &state->sd;
835 struct adv7511_edid_detect ed;
837 v4l2_dbg(1, debug, sd, "%s:\n", __func__);
839 if (adv7511_check_edid_status(sd)) {
840 /* Return if we received the EDID. */
844 if (adv7511_have_hotplug(sd)) {
845 /* We must retry reading the EDID several times, it is possible
846 * that initially the EDID couldn't be read due to i2c errors
847 * (DVI connectors are particularly prone to this problem). */
848 if (state->edid.read_retries) {
849 state->edid.read_retries--;
850 v4l2_dbg(1, debug, sd, "%s: edid read failed\n", __func__);
851 state->have_monitor = false;
852 adv7511_s_power(sd, false);
853 adv7511_s_power(sd, true);
854 queue_delayed_work(state->work_queue, &state->edid_handler, EDID_DELAY);
859 /* We failed to read the EDID, so send an event for this. */
861 ed.segment = adv7511_rd(sd, 0xc4);
862 v4l2_subdev_notify(sd, ADV7511_EDID_DETECT, (void *)&ed);
863 v4l2_dbg(1, debug, sd, "%s: no edid found\n", __func__);
866 static void adv7511_audio_setup(struct v4l2_subdev *sd)
868 v4l2_dbg(1, debug, sd, "%s\n", __func__);
870 adv7511_s_i2s_clock_freq(sd, 48000);
871 adv7511_s_clock_freq(sd, 48000);
872 adv7511_s_routing(sd, 0, 0, 0);
875 /* Configure hdmi transmitter. */
876 static void adv7511_setup(struct v4l2_subdev *sd)
878 struct adv7511_state *state = get_adv7511_state(sd);
879 v4l2_dbg(1, debug, sd, "%s\n", __func__);
881 /* Input format: RGB 4:4:4 */
882 adv7511_wr_and_or(sd, 0x15, 0xf0, 0x0);
883 /* Output format: RGB 4:4:4 */
884 adv7511_wr_and_or(sd, 0x16, 0x7f, 0x0);
885 /* 1st order interpolation 4:2:2 -> 4:4:4 up conversion, Aspect ratio: 16:9 */
886 adv7511_wr_and_or(sd, 0x17, 0xf9, 0x06);
887 /* Disable pixel repetition */
888 adv7511_wr_and_or(sd, 0x3b, 0x9f, 0x0);
890 adv7511_wr_and_or(sd, 0x18, 0x7f, 0x0);
891 /* Output format: RGB 4:4:4, Active Format Information is valid,
893 adv7511_wr_and_or(sd, 0x55, 0x9c, 0x12);
894 /* AVI Info frame packet enable, Audio Info frame disable */
895 adv7511_wr_and_or(sd, 0x44, 0xe7, 0x10);
896 /* Colorimetry, Active format aspect ratio: same as picure. */
897 adv7511_wr(sd, 0x56, 0xa8);
899 adv7511_wr_and_or(sd, 0xaf, 0xed, 0x0);
901 /* Positive clk edge capture for input video clock */
902 adv7511_wr_and_or(sd, 0xba, 0x1f, 0x60);
904 adv7511_audio_setup(sd);
906 v4l2_ctrl_handler_setup(&state->hdl);
909 static void adv7511_notify_monitor_detect(struct v4l2_subdev *sd)
911 struct adv7511_monitor_detect mdt;
912 struct adv7511_state *state = get_adv7511_state(sd);
914 mdt.present = state->have_monitor;
915 v4l2_subdev_notify(sd, ADV7511_MONITOR_DETECT, (void *)&mdt);
918 static void adv7511_check_monitor_present_status(struct v4l2_subdev *sd)
920 struct adv7511_state *state = get_adv7511_state(sd);
921 /* read hotplug and rx-sense state */
922 uint8_t status = adv7511_rd(sd, 0x42);
924 v4l2_dbg(1, debug, sd, "%s: status: 0x%x%s%s\n",
927 status & MASK_ADV7511_HPD_DETECT ? ", hotplug" : "",
928 status & MASK_ADV7511_MSEN_DETECT ? ", rx-sense" : "");
930 /* update read only ctrls */
931 v4l2_ctrl_s_ctrl(state->hotplug_ctrl, adv7511_have_hotplug(sd) ? 0x1 : 0x0);
932 v4l2_ctrl_s_ctrl(state->rx_sense_ctrl, adv7511_have_rx_sense(sd) ? 0x1 : 0x0);
933 v4l2_ctrl_s_ctrl(state->have_edid0_ctrl, state->edid.segments ? 0x1 : 0x0);
935 if ((status & MASK_ADV7511_HPD_DETECT) && ((status & MASK_ADV7511_MSEN_DETECT) || state->edid.segments)) {
936 v4l2_dbg(1, debug, sd, "%s: hotplug and (rx-sense or edid)\n", __func__);
937 if (!state->have_monitor) {
938 v4l2_dbg(1, debug, sd, "%s: monitor detected\n", __func__);
939 state->have_monitor = true;
940 adv7511_set_isr(sd, true);
941 if (!adv7511_s_power(sd, true)) {
942 v4l2_dbg(1, debug, sd, "%s: monitor detected, powerup failed\n", __func__);
946 adv7511_notify_monitor_detect(sd);
947 state->edid.read_retries = EDID_MAX_RETRIES;
948 queue_delayed_work(state->work_queue, &state->edid_handler, EDID_DELAY);
950 } else if (status & MASK_ADV7511_HPD_DETECT) {
951 v4l2_dbg(1, debug, sd, "%s: hotplug detected\n", __func__);
952 state->edid.read_retries = EDID_MAX_RETRIES;
953 queue_delayed_work(state->work_queue, &state->edid_handler, EDID_DELAY);
954 } else if (!(status & MASK_ADV7511_HPD_DETECT)) {
955 v4l2_dbg(1, debug, sd, "%s: hotplug not detected\n", __func__);
956 if (state->have_monitor) {
957 v4l2_dbg(1, debug, sd, "%s: monitor not detected\n", __func__);
958 state->have_monitor = false;
959 adv7511_notify_monitor_detect(sd);
961 adv7511_s_power(sd, false);
962 memset(&state->edid, 0, sizeof(struct adv7511_state_edid));
966 static bool edid_block_verify_crc(uint8_t *edid_block)
971 for (i = 0; i < 128; i++)
972 sum += edid_block[i];
976 static bool edid_verify_crc(struct v4l2_subdev *sd, u32 segment)
978 struct adv7511_state *state = get_adv7511_state(sd);
979 u32 blocks = state->edid.blocks;
980 uint8_t *data = state->edid.data;
982 if (!edid_block_verify_crc(&data[segment * 256]))
984 if ((segment + 1) * 2 <= blocks)
985 return edid_block_verify_crc(&data[segment * 256 + 128]);
989 static bool edid_verify_header(struct v4l2_subdev *sd, u32 segment)
991 static const u8 hdmi_header[] = {
992 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00
994 struct adv7511_state *state = get_adv7511_state(sd);
995 u8 *data = state->edid.data;
999 return !memcmp(data, hdmi_header, sizeof(hdmi_header));
1002 static bool adv7511_check_edid_status(struct v4l2_subdev *sd)
1004 struct adv7511_state *state = get_adv7511_state(sd);
1005 uint8_t edidRdy = adv7511_rd(sd, 0xc5);
1007 v4l2_dbg(1, debug, sd, "%s: edid ready (retries: %d)\n",
1008 __func__, EDID_MAX_RETRIES - state->edid.read_retries);
1010 if (state->edid.complete)
1013 if (edidRdy & MASK_ADV7511_EDID_RDY) {
1014 int segment = adv7511_rd(sd, 0xc4);
1015 struct adv7511_edid_detect ed;
1017 if (segment >= EDID_MAX_SEGM) {
1018 v4l2_err(sd, "edid segment number too big\n");
1021 v4l2_dbg(1, debug, sd, "%s: got segment %d\n", __func__, segment);
1022 adv7511_edid_rd(sd, 256, &state->edid.data[segment * 256]);
1023 adv7511_dbg_dump_edid(2, debug, sd, segment, &state->edid.data[segment * 256]);
1025 state->edid.blocks = state->edid.data[0x7e] + 1;
1026 v4l2_dbg(1, debug, sd, "%s: %d blocks in total\n", __func__, state->edid.blocks);
1028 if (!edid_verify_crc(sd, segment) ||
1029 !edid_verify_header(sd, segment)) {
1030 /* edid crc error, force reread of edid segment */
1031 v4l2_err(sd, "%s: edid crc or header error\n", __func__);
1032 state->have_monitor = false;
1033 adv7511_s_power(sd, false);
1034 adv7511_s_power(sd, true);
1037 /* one more segment read ok */
1038 state->edid.segments = segment + 1;
1039 if (((state->edid.data[0x7e] >> 1) + 1) > state->edid.segments) {
1040 /* Request next EDID segment */
1041 v4l2_dbg(1, debug, sd, "%s: request segment %d\n", __func__, state->edid.segments);
1042 adv7511_wr(sd, 0xc9, 0xf);
1043 adv7511_wr(sd, 0xc4, state->edid.segments);
1044 state->edid.read_retries = EDID_MAX_RETRIES;
1045 queue_delayed_work(state->work_queue, &state->edid_handler, EDID_DELAY);
1049 v4l2_dbg(1, debug, sd, "%s: edid complete with %d segment(s)\n", __func__, state->edid.segments);
1050 state->edid.complete = true;
1052 /* report when we have all segments
1053 but report only for segment 0
1057 state->edid_detect_counter++;
1058 v4l2_ctrl_s_ctrl(state->have_edid0_ctrl, state->edid.segments ? 0x1 : 0x0);
1059 v4l2_subdev_notify(sd, ADV7511_EDID_DETECT, (void *)&ed);
1066 /* ----------------------------------------------------------------------- */
1068 static void adv7511_init_setup(struct v4l2_subdev *sd)
1070 struct adv7511_state *state = get_adv7511_state(sd);
1071 struct adv7511_state_edid *edid = &state->edid;
1073 v4l2_dbg(1, debug, sd, "%s\n", __func__);
1075 /* clear all interrupts */
1076 adv7511_wr(sd, 0x96, 0xff);
1078 * Stop HPD from resetting a lot of registers.
1079 * It might leave the chip in a partly un-initialized state,
1080 * in particular with regards to hotplug bounces.
1082 adv7511_wr_and_or(sd, 0xd6, 0x3f, 0xc0);
1083 memset(edid, 0, sizeof(struct adv7511_state_edid));
1084 state->have_monitor = false;
1085 adv7511_set_isr(sd, false);
1086 adv7511_s_stream(sd, false);
1087 adv7511_s_audio_stream(sd, false);
1090 static int adv7511_probe(struct i2c_client *client, const struct i2c_device_id *id)
1092 struct adv7511_state *state;
1093 struct adv7511_platform_data *pdata = client->dev.platform_data;
1094 struct v4l2_ctrl_handler *hdl;
1095 struct v4l2_subdev *sd;
1099 /* Check if the adapter supports the needed features */
1100 if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
1103 state = devm_kzalloc(&client->dev, sizeof(struct adv7511_state), GFP_KERNEL);
1109 v4l_err(client, "No platform data!\n");
1112 memcpy(&state->pdata, pdata, sizeof(state->pdata));
1116 v4l2_dbg(1, debug, sd, "detecting adv7511 client on address 0x%x\n",
1119 v4l2_i2c_subdev_init(sd, client, &adv7511_ops);
1122 v4l2_ctrl_handler_init(hdl, 10);
1123 /* add in ascending ID order */
1124 state->hdmi_mode_ctrl = v4l2_ctrl_new_std_menu(hdl, &adv7511_ctrl_ops,
1125 V4L2_CID_DV_TX_MODE, V4L2_DV_TX_MODE_HDMI,
1126 0, V4L2_DV_TX_MODE_DVI_D);
1127 state->hotplug_ctrl = v4l2_ctrl_new_std(hdl, NULL,
1128 V4L2_CID_DV_TX_HOTPLUG, 0, 1, 0, 0);
1129 state->rx_sense_ctrl = v4l2_ctrl_new_std(hdl, NULL,
1130 V4L2_CID_DV_TX_RXSENSE, 0, 1, 0, 0);
1131 state->have_edid0_ctrl = v4l2_ctrl_new_std(hdl, NULL,
1132 V4L2_CID_DV_TX_EDID_PRESENT, 0, 1, 0, 0);
1133 state->rgb_quantization_range_ctrl =
1134 v4l2_ctrl_new_std_menu(hdl, &adv7511_ctrl_ops,
1135 V4L2_CID_DV_TX_RGB_RANGE, V4L2_DV_RGB_RANGE_FULL,
1136 0, V4L2_DV_RGB_RANGE_AUTO);
1137 sd->ctrl_handler = hdl;
1142 state->hdmi_mode_ctrl->is_private = true;
1143 state->hotplug_ctrl->is_private = true;
1144 state->rx_sense_ctrl->is_private = true;
1145 state->have_edid0_ctrl->is_private = true;
1146 state->rgb_quantization_range_ctrl->is_private = true;
1148 state->pad.flags = MEDIA_PAD_FL_SINK;
1149 err = media_entity_init(&sd->entity, 1, &state->pad, 0);
1153 /* EDID and CEC i2c addr */
1154 state->i2c_edid_addr = state->pdata.i2c_edid << 1;
1155 state->i2c_cec_addr = state->pdata.i2c_cec << 1;
1157 state->chip_revision = adv7511_rd(sd, 0x0);
1158 chip_id[0] = adv7511_rd(sd, 0xf5);
1159 chip_id[1] = adv7511_rd(sd, 0xf6);
1160 if (chip_id[0] != 0x75 || chip_id[1] != 0x11) {
1161 v4l2_err(sd, "chip_id != 0x7511, read 0x%02x%02x\n", chip_id[0], chip_id[1]);
1166 state->i2c_edid = i2c_new_dummy(client->adapter, state->i2c_edid_addr >> 1);
1167 if (state->i2c_edid == NULL) {
1168 v4l2_err(sd, "failed to register edid i2c client\n");
1173 adv7511_wr(sd, 0xe2, 0x01); /* power down cec section */
1174 state->work_queue = create_singlethread_workqueue(sd->name);
1175 if (state->work_queue == NULL) {
1176 v4l2_err(sd, "could not create workqueue\n");
1181 INIT_DELAYED_WORK(&state->edid_handler, adv7511_edid_handler);
1183 adv7511_init_setup(sd);
1184 adv7511_set_isr(sd, true);
1185 adv7511_check_monitor_present_status(sd);
1187 v4l2_info(sd, "%s found @ 0x%x (%s)\n", client->name,
1188 client->addr << 1, client->adapter->name);
1192 i2c_unregister_device(state->i2c_edid);
1194 media_entity_cleanup(&sd->entity);
1196 v4l2_ctrl_handler_free(&state->hdl);
1200 /* ----------------------------------------------------------------------- */
1202 static int adv7511_remove(struct i2c_client *client)
1204 struct v4l2_subdev *sd = i2c_get_clientdata(client);
1205 struct adv7511_state *state = get_adv7511_state(sd);
1207 state->chip_revision = -1;
1209 v4l2_dbg(1, debug, sd, "%s removed @ 0x%x (%s)\n", client->name,
1210 client->addr << 1, client->adapter->name);
1212 adv7511_init_setup(sd);
1213 cancel_delayed_work(&state->edid_handler);
1214 i2c_unregister_device(state->i2c_edid);
1215 destroy_workqueue(state->work_queue);
1216 v4l2_device_unregister_subdev(sd);
1217 media_entity_cleanup(&sd->entity);
1218 v4l2_ctrl_handler_free(sd->ctrl_handler);
1222 /* ----------------------------------------------------------------------- */
1224 static struct i2c_device_id adv7511_id[] = {
1228 MODULE_DEVICE_TABLE(i2c, adv7511_id);
1230 static struct i2c_driver adv7511_driver = {
1232 .owner = THIS_MODULE,
1235 .probe = adv7511_probe,
1236 .remove = adv7511_remove,
1237 .id_table = adv7511_id,
1240 module_i2c_driver(adv7511_driver);