2 * drivers/media/i2c/tvp514x.c
4 * TI TVP5146/47 decoder driver
6 * Copyright (C) 2008 Texas Instruments Inc
7 * Author: Vaibhav Hiremath <hvaibhav@ti.com>
10 * Sivaraj R <sivaraj@ti.com>
11 * Brijesh R Jadav <brijesh.j@ti.com>
12 * Hardik Shah <hardik.shah@ti.com>
13 * Manjunath Hadli <mrh@ti.com>
14 * Karicheri Muralidharan <m-karicheri2@ti.com>
16 * This package is free software; you can redistribute it and/or modify
17 * it under the terms of the GNU General Public License version 2 as
18 * published by the Free Software Foundation.
20 * This program is distributed in the hope that it will be useful,
21 * but WITHOUT ANY WARRANTY; without even the implied warranty of
22 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
23 * GNU General Public License for more details.
25 * You should have received a copy of the GNU General Public License
26 * along with this program; if not, write to the Free Software
27 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
31 #include <linux/i2c.h>
32 #include <linux/slab.h>
33 #include <linux/delay.h>
34 #include <linux/videodev2.h>
35 #include <linux/module.h>
37 #include <media/v4l2-device.h>
38 #include <media/v4l2-common.h>
39 #include <media/v4l2-mediabus.h>
40 #include <media/v4l2-chip-ident.h>
41 #include <media/v4l2-ctrls.h>
42 #include <media/tvp514x.h>
44 #include "tvp514x_regs.h"
47 #define TVP514X_MODULE_NAME "tvp514x"
49 /* Private macros for TVP */
50 #define I2C_RETRY_COUNT (5)
51 #define LOCK_RETRY_COUNT (5)
52 #define LOCK_RETRY_DELAY (200)
56 module_param(debug, bool, 0644);
57 MODULE_PARM_DESC(debug, "Debug level (0-1)");
59 MODULE_AUTHOR("Texas Instruments");
60 MODULE_DESCRIPTION("TVP514X linux decoder driver");
61 MODULE_LICENSE("GPL");
63 /* enum tvp514x_std - enum for supported standards */
71 * struct tvp514x_std_info - Structure to store standard informations
72 * @width: Line width in pixels
73 * @height:Number of active lines
74 * @video_std: Value to write in REG_VIDEO_STD register
75 * @standard: v4l2 standard structure information
77 struct tvp514x_std_info {
81 struct v4l2_standard standard;
84 static struct tvp514x_reg tvp514x_reg_list_default[0x40];
86 static int tvp514x_s_stream(struct v4l2_subdev *sd, int enable);
88 * struct tvp514x_decoder - TVP5146/47 decoder object
89 * @sd: Subdevice Slave handle
90 * @tvp514x_regs: copy of hw's regs with preset values.
91 * @pdata: Board specific
93 * @streaming: TVP5146/47 decoder streaming - enabled or disabled.
94 * @current_std: Current standard
95 * @num_stds: Number of standards
96 * @std_list: Standards list
97 * @input: Input routing at chip level
98 * @output: Output routing at chip level
100 struct tvp514x_decoder {
101 struct v4l2_subdev sd;
102 struct v4l2_ctrl_handler hdl;
103 struct tvp514x_reg tvp514x_regs[ARRAY_SIZE(tvp514x_reg_list_default)];
104 const struct tvp514x_platform_data *pdata;
109 enum tvp514x_std current_std;
111 const struct tvp514x_std_info *std_list;
112 /* Input and Output Routing parameters */
117 /* TVP514x default register values */
118 static struct tvp514x_reg tvp514x_reg_list_default[] = {
119 /* Composite selected */
120 {TOK_WRITE, REG_INPUT_SEL, 0x05},
121 {TOK_WRITE, REG_AFE_GAIN_CTRL, 0x0F},
123 {TOK_WRITE, REG_VIDEO_STD, 0x00},
124 {TOK_WRITE, REG_OPERATION_MODE, 0x00},
125 {TOK_SKIP, REG_AUTOSWITCH_MASK, 0x3F},
126 {TOK_WRITE, REG_COLOR_KILLER, 0x10},
127 {TOK_WRITE, REG_LUMA_CONTROL1, 0x00},
128 {TOK_WRITE, REG_LUMA_CONTROL2, 0x00},
129 {TOK_WRITE, REG_LUMA_CONTROL3, 0x02},
130 {TOK_WRITE, REG_BRIGHTNESS, 0x80},
131 {TOK_WRITE, REG_CONTRAST, 0x80},
132 {TOK_WRITE, REG_SATURATION, 0x80},
133 {TOK_WRITE, REG_HUE, 0x00},
134 {TOK_WRITE, REG_CHROMA_CONTROL1, 0x00},
135 {TOK_WRITE, REG_CHROMA_CONTROL2, 0x0E},
137 {TOK_SKIP, 0x0F, 0x00},
138 {TOK_WRITE, REG_COMP_PR_SATURATION, 0x80},
139 {TOK_WRITE, REG_COMP_Y_CONTRAST, 0x80},
140 {TOK_WRITE, REG_COMP_PB_SATURATION, 0x80},
142 {TOK_SKIP, 0x13, 0x00},
143 {TOK_WRITE, REG_COMP_Y_BRIGHTNESS, 0x80},
145 {TOK_SKIP, 0x15, 0x00},
147 {TOK_SKIP, REG_AVID_START_PIXEL_LSB, 0x55},
148 {TOK_SKIP, REG_AVID_START_PIXEL_MSB, 0x00},
149 {TOK_SKIP, REG_AVID_STOP_PIXEL_LSB, 0x25},
150 {TOK_SKIP, REG_AVID_STOP_PIXEL_MSB, 0x03},
152 {TOK_SKIP, REG_HSYNC_START_PIXEL_LSB, 0x00},
153 {TOK_SKIP, REG_HSYNC_START_PIXEL_MSB, 0x00},
154 {TOK_SKIP, REG_HSYNC_STOP_PIXEL_LSB, 0x40},
155 {TOK_SKIP, REG_HSYNC_STOP_PIXEL_MSB, 0x00},
157 {TOK_SKIP, REG_VSYNC_START_LINE_LSB, 0x04},
158 {TOK_SKIP, REG_VSYNC_START_LINE_MSB, 0x00},
159 {TOK_SKIP, REG_VSYNC_STOP_LINE_LSB, 0x07},
160 {TOK_SKIP, REG_VSYNC_STOP_LINE_MSB, 0x00},
162 {TOK_SKIP, REG_VBLK_START_LINE_LSB, 0x01},
163 {TOK_SKIP, REG_VBLK_START_LINE_MSB, 0x00},
164 {TOK_SKIP, REG_VBLK_STOP_LINE_LSB, 0x15},
165 {TOK_SKIP, REG_VBLK_STOP_LINE_MSB, 0x00},
167 {TOK_SKIP, 0x26, 0x00},
169 {TOK_SKIP, 0x27, 0x00},
170 {TOK_SKIP, REG_FAST_SWTICH_CONTROL, 0xCC},
172 {TOK_SKIP, 0x29, 0x00},
173 {TOK_SKIP, REG_FAST_SWTICH_SCART_DELAY, 0x00},
175 {TOK_SKIP, 0x2B, 0x00},
176 {TOK_SKIP, REG_SCART_DELAY, 0x00},
177 {TOK_SKIP, REG_CTI_DELAY, 0x00},
178 {TOK_SKIP, REG_CTI_CONTROL, 0x00},
180 {TOK_SKIP, 0x2F, 0x00},
182 {TOK_SKIP, 0x30, 0x00},
184 {TOK_SKIP, 0x31, 0x00},
185 /* HS, VS active high */
186 {TOK_WRITE, REG_SYNC_CONTROL, 0x00},
188 {TOK_WRITE, REG_OUTPUT_FORMATTER1, 0x00},
189 /* Enable clk & data */
190 {TOK_WRITE, REG_OUTPUT_FORMATTER2, 0x11},
191 /* Enable AVID & FLD */
192 {TOK_WRITE, REG_OUTPUT_FORMATTER3, 0xEE},
194 {TOK_WRITE, REG_OUTPUT_FORMATTER4, 0xAF},
195 {TOK_WRITE, REG_OUTPUT_FORMATTER5, 0xFF},
196 {TOK_WRITE, REG_OUTPUT_FORMATTER6, 0xFF},
198 {TOK_WRITE, REG_CLEAR_LOST_LOCK, 0x01},
203 * Supported standards -
205 * Currently supports two standards only, need to add support for rest of the
206 * modes, like SECAM, etc...
208 static const struct tvp514x_std_info tvp514x_std_list[] = {
209 /* Standard: STD_NTSC_MJ */
211 .width = NTSC_NUM_ACTIVE_PIXELS,
212 .height = NTSC_NUM_ACTIVE_LINES,
213 .video_std = VIDEO_STD_NTSC_MJ_BIT,
218 .frameperiod = {1001, 30000},
221 /* Standard: STD_PAL_BDGHIN */
224 .width = PAL_NUM_ACTIVE_PIXELS,
225 .height = PAL_NUM_ACTIVE_LINES,
226 .video_std = VIDEO_STD_PAL_BDGHIN_BIT,
231 .frameperiod = {1, 25},
235 /* Standard: need to add for additional standard */
239 static inline struct tvp514x_decoder *to_decoder(struct v4l2_subdev *sd)
241 return container_of(sd, struct tvp514x_decoder, sd);
244 static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl)
246 return &container_of(ctrl->handler, struct tvp514x_decoder, hdl)->sd;
251 * tvp514x_read_reg() - Read a value from a register in an TVP5146/47.
252 * @sd: ptr to v4l2_subdev struct
253 * @reg: TVP5146/47 register address
255 * Returns value read if successful, or non-zero (-1) otherwise.
257 static int tvp514x_read_reg(struct v4l2_subdev *sd, u8 reg)
260 struct i2c_client *client = v4l2_get_subdevdata(sd);
264 err = i2c_smbus_read_byte_data(client, reg);
266 if (retry <= I2C_RETRY_COUNT) {
267 v4l2_warn(sd, "Read: retry ... %d\n", retry);
269 msleep_interruptible(10);
278 * dump_reg() - dump the register content of TVP5146/47.
279 * @sd: ptr to v4l2_subdev struct
280 * @reg: TVP5146/47 register address
282 static void dump_reg(struct v4l2_subdev *sd, u8 reg)
286 val = tvp514x_read_reg(sd, reg);
287 v4l2_info(sd, "Reg(0x%.2X): 0x%.2X\n", reg, val);
291 * tvp514x_write_reg() - Write a value to a register in TVP5146/47
292 * @sd: ptr to v4l2_subdev struct
293 * @reg: TVP5146/47 register address
294 * @val: value to be written to the register
296 * Write a value to a register in an TVP5146/47 decoder device.
297 * Returns zero if successful, or non-zero otherwise.
299 static int tvp514x_write_reg(struct v4l2_subdev *sd, u8 reg, u8 val)
302 struct i2c_client *client = v4l2_get_subdevdata(sd);
306 err = i2c_smbus_write_byte_data(client, reg, val);
308 if (retry <= I2C_RETRY_COUNT) {
309 v4l2_warn(sd, "Write: retry ... %d\n", retry);
311 msleep_interruptible(10);
320 * tvp514x_write_regs() : Initializes a list of TVP5146/47 registers
321 * @sd: ptr to v4l2_subdev struct
322 * @reglist: list of TVP5146/47 registers and values
324 * Initializes a list of TVP5146/47 registers:-
325 * if token is TOK_TERM, then entire write operation terminates
326 * if token is TOK_DELAY, then a delay of 'val' msec is introduced
327 * if token is TOK_SKIP, then the register write is skipped
328 * if token is TOK_WRITE, then the register write is performed
329 * Returns zero if successful, or non-zero otherwise.
331 static int tvp514x_write_regs(struct v4l2_subdev *sd,
332 const struct tvp514x_reg reglist[])
335 const struct tvp514x_reg *next = reglist;
337 for (; next->token != TOK_TERM; next++) {
338 if (next->token == TOK_DELAY) {
343 if (next->token == TOK_SKIP)
346 err = tvp514x_write_reg(sd, next->reg, (u8) next->val);
348 v4l2_err(sd, "Write failed. Err[%d]\n", err);
356 * tvp514x_query_current_std() : Query the current standard detected by TVP5146/47
357 * @sd: ptr to v4l2_subdev struct
359 * Returns the current standard detected by TVP5146/47, STD_INVALID if there is no
362 static enum tvp514x_std tvp514x_query_current_std(struct v4l2_subdev *sd)
366 std = tvp514x_read_reg(sd, REG_VIDEO_STD);
367 if ((std & VIDEO_STD_MASK) == VIDEO_STD_AUTO_SWITCH_BIT)
368 /* use the standard status register */
369 std_status = tvp514x_read_reg(sd, REG_VIDEO_STD_STATUS);
371 /* use the standard register itself */
374 switch (std_status & VIDEO_STD_MASK) {
375 case VIDEO_STD_NTSC_MJ_BIT:
378 case VIDEO_STD_PAL_BDGHIN_BIT:
379 return STD_PAL_BDGHIN;
388 /* TVP5146/47 register dump function */
389 static void tvp514x_reg_dump(struct v4l2_subdev *sd)
391 dump_reg(sd, REG_INPUT_SEL);
392 dump_reg(sd, REG_AFE_GAIN_CTRL);
393 dump_reg(sd, REG_VIDEO_STD);
394 dump_reg(sd, REG_OPERATION_MODE);
395 dump_reg(sd, REG_COLOR_KILLER);
396 dump_reg(sd, REG_LUMA_CONTROL1);
397 dump_reg(sd, REG_LUMA_CONTROL2);
398 dump_reg(sd, REG_LUMA_CONTROL3);
399 dump_reg(sd, REG_BRIGHTNESS);
400 dump_reg(sd, REG_CONTRAST);
401 dump_reg(sd, REG_SATURATION);
402 dump_reg(sd, REG_HUE);
403 dump_reg(sd, REG_CHROMA_CONTROL1);
404 dump_reg(sd, REG_CHROMA_CONTROL2);
405 dump_reg(sd, REG_COMP_PR_SATURATION);
406 dump_reg(sd, REG_COMP_Y_CONTRAST);
407 dump_reg(sd, REG_COMP_PB_SATURATION);
408 dump_reg(sd, REG_COMP_Y_BRIGHTNESS);
409 dump_reg(sd, REG_AVID_START_PIXEL_LSB);
410 dump_reg(sd, REG_AVID_START_PIXEL_MSB);
411 dump_reg(sd, REG_AVID_STOP_PIXEL_LSB);
412 dump_reg(sd, REG_AVID_STOP_PIXEL_MSB);
413 dump_reg(sd, REG_HSYNC_START_PIXEL_LSB);
414 dump_reg(sd, REG_HSYNC_START_PIXEL_MSB);
415 dump_reg(sd, REG_HSYNC_STOP_PIXEL_LSB);
416 dump_reg(sd, REG_HSYNC_STOP_PIXEL_MSB);
417 dump_reg(sd, REG_VSYNC_START_LINE_LSB);
418 dump_reg(sd, REG_VSYNC_START_LINE_MSB);
419 dump_reg(sd, REG_VSYNC_STOP_LINE_LSB);
420 dump_reg(sd, REG_VSYNC_STOP_LINE_MSB);
421 dump_reg(sd, REG_VBLK_START_LINE_LSB);
422 dump_reg(sd, REG_VBLK_START_LINE_MSB);
423 dump_reg(sd, REG_VBLK_STOP_LINE_LSB);
424 dump_reg(sd, REG_VBLK_STOP_LINE_MSB);
425 dump_reg(sd, REG_SYNC_CONTROL);
426 dump_reg(sd, REG_OUTPUT_FORMATTER1);
427 dump_reg(sd, REG_OUTPUT_FORMATTER2);
428 dump_reg(sd, REG_OUTPUT_FORMATTER3);
429 dump_reg(sd, REG_OUTPUT_FORMATTER4);
430 dump_reg(sd, REG_OUTPUT_FORMATTER5);
431 dump_reg(sd, REG_OUTPUT_FORMATTER6);
432 dump_reg(sd, REG_CLEAR_LOST_LOCK);
436 * tvp514x_configure() - Configure the TVP5146/47 registers
437 * @sd: ptr to v4l2_subdev struct
438 * @decoder: ptr to tvp514x_decoder structure
440 * Returns zero if successful, or non-zero otherwise.
442 static int tvp514x_configure(struct v4l2_subdev *sd,
443 struct tvp514x_decoder *decoder)
447 /* common register initialization */
449 tvp514x_write_regs(sd, decoder->tvp514x_regs);
454 tvp514x_reg_dump(sd);
460 * tvp514x_detect() - Detect if an tvp514x is present, and if so which revision.
461 * @sd: pointer to standard V4L2 sub-device structure
462 * @decoder: pointer to tvp514x_decoder structure
464 * A device is considered to be detected if the chip ID (LSB and MSB)
465 * registers match the expected values.
466 * Any value of the rom version register is accepted.
467 * Returns ENODEV error number if no device is detected, or zero
468 * if a device is detected.
470 static int tvp514x_detect(struct v4l2_subdev *sd,
471 struct tvp514x_decoder *decoder)
473 u8 chip_id_msb, chip_id_lsb, rom_ver;
474 struct i2c_client *client = v4l2_get_subdevdata(sd);
476 chip_id_msb = tvp514x_read_reg(sd, REG_CHIP_ID_MSB);
477 chip_id_lsb = tvp514x_read_reg(sd, REG_CHIP_ID_LSB);
478 rom_ver = tvp514x_read_reg(sd, REG_ROM_VERSION);
480 v4l2_dbg(1, debug, sd,
481 "chip id detected msb:0x%x lsb:0x%x rom version:0x%x\n",
482 chip_id_msb, chip_id_lsb, rom_ver);
483 if ((chip_id_msb != TVP514X_CHIP_ID_MSB)
484 || ((chip_id_lsb != TVP5146_CHIP_ID_LSB)
485 && (chip_id_lsb != TVP5147_CHIP_ID_LSB))) {
486 /* We didn't read the values we expected, so this must not be
489 v4l2_err(sd, "chip id mismatch msb:0x%x lsb:0x%x\n",
490 chip_id_msb, chip_id_lsb);
494 decoder->ver = rom_ver;
496 v4l2_info(sd, "%s (Version - 0x%.2x) found at 0x%x (%s)\n",
497 client->name, decoder->ver,
498 client->addr << 1, client->adapter->name);
503 * tvp514x_querystd() - V4L2 decoder interface handler for querystd
504 * @sd: pointer to standard V4L2 sub-device structure
505 * @std_id: standard V4L2 std_id ioctl enum
507 * Returns the current standard detected by TVP5146/47. If no active input is
508 * detected then *std_id is set to 0 and the function returns 0.
510 static int tvp514x_querystd(struct v4l2_subdev *sd, v4l2_std_id *std_id)
512 struct tvp514x_decoder *decoder = to_decoder(sd);
513 enum tvp514x_std current_std;
514 enum tvp514x_input input_sel;
515 u8 sync_lock_status, lock_mask;
520 *std_id = V4L2_STD_UNKNOWN;
522 /* To query the standard the TVP514x must power on the ADCs. */
523 if (!decoder->streaming) {
524 tvp514x_s_stream(sd, 1);
525 msleep(LOCK_RETRY_DELAY);
528 /* query the current standard */
529 current_std = tvp514x_query_current_std(sd);
530 if (current_std == STD_INVALID)
533 input_sel = decoder->input;
536 case INPUT_CVBS_VI1A:
537 case INPUT_CVBS_VI1B:
538 case INPUT_CVBS_VI1C:
539 case INPUT_CVBS_VI2A:
540 case INPUT_CVBS_VI2B:
541 case INPUT_CVBS_VI2C:
542 case INPUT_CVBS_VI3A:
543 case INPUT_CVBS_VI3B:
544 case INPUT_CVBS_VI3C:
545 case INPUT_CVBS_VI4A:
546 lock_mask = STATUS_CLR_SUBCAR_LOCK_BIT |
547 STATUS_HORZ_SYNC_LOCK_BIT |
548 STATUS_VIRT_SYNC_LOCK_BIT;
551 case INPUT_SVIDEO_VI2A_VI1A:
552 case INPUT_SVIDEO_VI2B_VI1B:
553 case INPUT_SVIDEO_VI2C_VI1C:
554 case INPUT_SVIDEO_VI2A_VI3A:
555 case INPUT_SVIDEO_VI2B_VI3B:
556 case INPUT_SVIDEO_VI2C_VI3C:
557 case INPUT_SVIDEO_VI4A_VI1A:
558 case INPUT_SVIDEO_VI4A_VI1B:
559 case INPUT_SVIDEO_VI4A_VI1C:
560 case INPUT_SVIDEO_VI4A_VI3A:
561 case INPUT_SVIDEO_VI4A_VI3B:
562 case INPUT_SVIDEO_VI4A_VI3C:
563 lock_mask = STATUS_HORZ_SYNC_LOCK_BIT |
564 STATUS_VIRT_SYNC_LOCK_BIT;
566 /*Need to add other interfaces*/
570 /* check whether signal is locked */
571 sync_lock_status = tvp514x_read_reg(sd, REG_STATUS1);
572 if (lock_mask != (sync_lock_status & lock_mask))
573 return 0; /* No input detected */
575 *std_id = decoder->std_list[current_std].standard.id;
577 v4l2_dbg(1, debug, sd, "Current STD: %s\n",
578 decoder->std_list[current_std].standard.name);
583 * tvp514x_s_std() - V4L2 decoder interface handler for s_std
584 * @sd: pointer to standard V4L2 sub-device structure
585 * @std_id: standard V4L2 v4l2_std_id ioctl enum
587 * If std_id is supported, sets the requested standard. Otherwise, returns
590 static int tvp514x_s_std(struct v4l2_subdev *sd, v4l2_std_id std_id)
592 struct tvp514x_decoder *decoder = to_decoder(sd);
595 for (i = 0; i < decoder->num_stds; i++)
596 if (std_id & decoder->std_list[i].standard.id)
599 if ((i == decoder->num_stds) || (i == STD_INVALID))
602 err = tvp514x_write_reg(sd, REG_VIDEO_STD,
603 decoder->std_list[i].video_std);
607 decoder->current_std = i;
608 decoder->tvp514x_regs[REG_VIDEO_STD].val =
609 decoder->std_list[i].video_std;
611 v4l2_dbg(1, debug, sd, "Standard set to: %s\n",
612 decoder->std_list[i].standard.name);
617 * tvp514x_s_routing() - V4L2 decoder interface handler for s_routing
618 * @sd: pointer to standard V4L2 sub-device structure
619 * @input: input selector for routing the signal
620 * @output: output selector for routing the signal
621 * @config: config value. Not used
623 * If index is valid, selects the requested input. Otherwise, returns -EINVAL if
624 * the input is not supported or there is no active signal present in the
627 static int tvp514x_s_routing(struct v4l2_subdev *sd,
628 u32 input, u32 output, u32 config)
630 struct tvp514x_decoder *decoder = to_decoder(sd);
632 enum tvp514x_input input_sel;
633 enum tvp514x_output output_sel;
635 if ((input >= INPUT_INVALID) ||
636 (output >= OUTPUT_INVALID))
637 /* Index out of bound */
643 err = tvp514x_write_reg(sd, REG_INPUT_SEL, input_sel);
647 output_sel |= tvp514x_read_reg(sd,
648 REG_OUTPUT_FORMATTER1) & 0x7;
649 err = tvp514x_write_reg(sd, REG_OUTPUT_FORMATTER1,
654 decoder->tvp514x_regs[REG_INPUT_SEL].val = input_sel;
655 decoder->tvp514x_regs[REG_OUTPUT_FORMATTER1].val = output_sel;
656 decoder->input = input;
657 decoder->output = output;
659 v4l2_dbg(1, debug, sd, "Input set to: %d\n", input_sel);
665 * tvp514x_s_ctrl() - V4L2 decoder interface handler for s_ctrl
666 * @ctrl: pointer to v4l2_ctrl structure
668 * If the requested control is supported, sets the control's current
669 * value in HW. Otherwise, returns -EINVAL if the control is not supported.
671 static int tvp514x_s_ctrl(struct v4l2_ctrl *ctrl)
673 struct v4l2_subdev *sd = to_sd(ctrl);
674 struct tvp514x_decoder *decoder = to_decoder(sd);
675 int err = -EINVAL, value;
680 case V4L2_CID_BRIGHTNESS:
681 err = tvp514x_write_reg(sd, REG_BRIGHTNESS, value);
683 decoder->tvp514x_regs[REG_BRIGHTNESS].val = value;
685 case V4L2_CID_CONTRAST:
686 err = tvp514x_write_reg(sd, REG_CONTRAST, value);
688 decoder->tvp514x_regs[REG_CONTRAST].val = value;
690 case V4L2_CID_SATURATION:
691 err = tvp514x_write_reg(sd, REG_SATURATION, value);
693 decoder->tvp514x_regs[REG_SATURATION].val = value;
698 else if (value == -180)
700 err = tvp514x_write_reg(sd, REG_HUE, value);
702 decoder->tvp514x_regs[REG_HUE].val = value;
704 case V4L2_CID_AUTOGAIN:
705 err = tvp514x_write_reg(sd, REG_AFE_GAIN_CTRL, value ? 0x0f : 0x0c);
707 decoder->tvp514x_regs[REG_AFE_GAIN_CTRL].val = value;
711 v4l2_dbg(1, debug, sd, "Set Control: ID - %d - %d\n",
712 ctrl->id, ctrl->val);
717 * tvp514x_enum_mbus_fmt() - V4L2 decoder interface handler for enum_mbus_fmt
718 * @sd: pointer to standard V4L2 sub-device structure
719 * @index: index of pixelcode to retrieve
720 * @code: receives the pixelcode
722 * Enumerates supported mediabus formats
725 tvp514x_enum_mbus_fmt(struct v4l2_subdev *sd, unsigned index,
726 enum v4l2_mbus_pixelcode *code)
731 *code = V4L2_MBUS_FMT_YUYV10_2X10;
736 * tvp514x_mbus_fmt_cap() - V4L2 decoder interface handler for try/s/g_mbus_fmt
737 * @sd: pointer to standard V4L2 sub-device structure
738 * @f: pointer to the mediabus format structure
740 * Negotiates the image capture size and mediabus format.
743 tvp514x_mbus_fmt(struct v4l2_subdev *sd, struct v4l2_mbus_framefmt *f)
745 struct tvp514x_decoder *decoder = to_decoder(sd);
746 enum tvp514x_std current_std;
751 /* Calculate height and width based on current standard */
752 current_std = decoder->current_std;
754 f->code = V4L2_MBUS_FMT_YUYV10_2X10;
755 f->width = decoder->std_list[current_std].width;
756 f->height = decoder->std_list[current_std].height;
757 f->field = V4L2_FIELD_INTERLACED;
758 f->colorspace = V4L2_COLORSPACE_SMPTE170M;
760 v4l2_dbg(1, debug, sd, "MBUS_FMT: Width - %d, Height - %d\n",
761 f->width, f->height);
766 * tvp514x_g_parm() - V4L2 decoder interface handler for g_parm
767 * @sd: pointer to standard V4L2 sub-device structure
768 * @a: pointer to standard V4L2 VIDIOC_G_PARM ioctl structure
770 * Returns the decoder's video CAPTURE parameters.
773 tvp514x_g_parm(struct v4l2_subdev *sd, struct v4l2_streamparm *a)
775 struct tvp514x_decoder *decoder = to_decoder(sd);
776 struct v4l2_captureparm *cparm;
777 enum tvp514x_std current_std;
782 if (a->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
783 /* only capture is supported */
786 /* get the current standard */
787 current_std = decoder->current_std;
789 cparm = &a->parm.capture;
790 cparm->capability = V4L2_CAP_TIMEPERFRAME;
791 cparm->timeperframe =
792 decoder->std_list[current_std].standard.frameperiod;
798 * tvp514x_s_parm() - V4L2 decoder interface handler for s_parm
799 * @sd: pointer to standard V4L2 sub-device structure
800 * @a: pointer to standard V4L2 VIDIOC_S_PARM ioctl structure
802 * Configures the decoder to use the input parameters, if possible. If
803 * not possible, returns the appropriate error code.
806 tvp514x_s_parm(struct v4l2_subdev *sd, struct v4l2_streamparm *a)
808 struct tvp514x_decoder *decoder = to_decoder(sd);
809 struct v4l2_fract *timeperframe;
810 enum tvp514x_std current_std;
815 if (a->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
816 /* only capture is supported */
819 timeperframe = &a->parm.capture.timeperframe;
821 /* get the current standard */
822 current_std = decoder->current_std;
825 decoder->std_list[current_std].standard.frameperiod;
831 * tvp514x_s_stream() - V4L2 decoder i/f handler for s_stream
832 * @sd: pointer to standard V4L2 sub-device structure
833 * @enable: streaming enable or disable
835 * Sets streaming to enable or disable, if possible.
837 static int tvp514x_s_stream(struct v4l2_subdev *sd, int enable)
840 struct i2c_client *client = v4l2_get_subdevdata(sd);
841 struct tvp514x_decoder *decoder = to_decoder(sd);
843 if (decoder->streaming == enable)
849 /* Power Down Sequence */
850 err = tvp514x_write_reg(sd, REG_OPERATION_MODE, 0x01);
852 v4l2_err(sd, "Unable to turn off decoder\n");
855 decoder->streaming = enable;
860 struct tvp514x_reg *int_seq = (struct tvp514x_reg *)
861 client->driver->id_table->driver_data;
863 /* Power Up Sequence */
864 err = tvp514x_write_regs(sd, int_seq);
866 v4l2_err(sd, "Unable to turn on decoder\n");
869 /* Detect if not already detected */
870 err = tvp514x_detect(sd, decoder);
872 v4l2_err(sd, "Unable to detect decoder\n");
875 err = tvp514x_configure(sd, decoder);
877 v4l2_err(sd, "Unable to configure decoder\n");
880 decoder->streaming = enable;
891 static const struct v4l2_ctrl_ops tvp514x_ctrl_ops = {
892 .s_ctrl = tvp514x_s_ctrl,
895 static const struct v4l2_subdev_core_ops tvp514x_core_ops = {
896 .g_ext_ctrls = v4l2_subdev_g_ext_ctrls,
897 .try_ext_ctrls = v4l2_subdev_try_ext_ctrls,
898 .s_ext_ctrls = v4l2_subdev_s_ext_ctrls,
899 .g_ctrl = v4l2_subdev_g_ctrl,
900 .s_ctrl = v4l2_subdev_s_ctrl,
901 .queryctrl = v4l2_subdev_queryctrl,
902 .querymenu = v4l2_subdev_querymenu,
903 .s_std = tvp514x_s_std,
906 static const struct v4l2_subdev_video_ops tvp514x_video_ops = {
907 .s_routing = tvp514x_s_routing,
908 .querystd = tvp514x_querystd,
909 .enum_mbus_fmt = tvp514x_enum_mbus_fmt,
910 .g_mbus_fmt = tvp514x_mbus_fmt,
911 .try_mbus_fmt = tvp514x_mbus_fmt,
912 .s_mbus_fmt = tvp514x_mbus_fmt,
913 .g_parm = tvp514x_g_parm,
914 .s_parm = tvp514x_s_parm,
915 .s_stream = tvp514x_s_stream,
918 static const struct v4l2_subdev_ops tvp514x_ops = {
919 .core = &tvp514x_core_ops,
920 .video = &tvp514x_video_ops,
923 static struct tvp514x_decoder tvp514x_dev = {
925 .current_std = STD_NTSC_MJ,
926 .std_list = tvp514x_std_list,
927 .num_stds = ARRAY_SIZE(tvp514x_std_list),
932 * tvp514x_probe() - decoder driver i2c probe handler
933 * @client: i2c driver client device structure
934 * @id: i2c driver id table
936 * Register decoder as an i2c client device and V4L2
940 tvp514x_probe(struct i2c_client *client, const struct i2c_device_id *id)
942 struct tvp514x_decoder *decoder;
943 struct v4l2_subdev *sd;
945 /* Check if the adapter supports the needed features */
946 if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
949 if (!client->dev.platform_data) {
950 v4l2_err(client, "No platform data!!\n");
954 decoder = kzalloc(sizeof(*decoder), GFP_KERNEL);
958 /* Initialize the tvp514x_decoder with default configuration */
959 *decoder = tvp514x_dev;
960 /* Copy default register configuration */
961 memcpy(decoder->tvp514x_regs, tvp514x_reg_list_default,
962 sizeof(tvp514x_reg_list_default));
964 /* Copy board specific information here */
965 decoder->pdata = client->dev.platform_data;
968 * Fetch platform specific data, and configure the
969 * tvp514x_reg_list[] accordingly. Since this is one
970 * time configuration, no need to preserve.
972 decoder->tvp514x_regs[REG_OUTPUT_FORMATTER2].val |=
973 (decoder->pdata->clk_polarity << 1);
974 decoder->tvp514x_regs[REG_SYNC_CONTROL].val |=
975 ((decoder->pdata->hs_polarity << 2) |
976 (decoder->pdata->vs_polarity << 3));
977 /* Set default standard to auto */
978 decoder->tvp514x_regs[REG_VIDEO_STD].val =
979 VIDEO_STD_AUTO_SWITCH_BIT;
981 /* Register with V4L2 layer as slave device */
983 v4l2_i2c_subdev_init(sd, client, &tvp514x_ops);
985 v4l2_ctrl_handler_init(&decoder->hdl, 5);
986 v4l2_ctrl_new_std(&decoder->hdl, &tvp514x_ctrl_ops,
987 V4L2_CID_BRIGHTNESS, 0, 255, 1, 128);
988 v4l2_ctrl_new_std(&decoder->hdl, &tvp514x_ctrl_ops,
989 V4L2_CID_CONTRAST, 0, 255, 1, 128);
990 v4l2_ctrl_new_std(&decoder->hdl, &tvp514x_ctrl_ops,
991 V4L2_CID_SATURATION, 0, 255, 1, 128);
992 v4l2_ctrl_new_std(&decoder->hdl, &tvp514x_ctrl_ops,
993 V4L2_CID_HUE, -180, 180, 180, 0);
994 v4l2_ctrl_new_std(&decoder->hdl, &tvp514x_ctrl_ops,
995 V4L2_CID_AUTOGAIN, 0, 1, 1, 1);
996 sd->ctrl_handler = &decoder->hdl;
997 if (decoder->hdl.error) {
998 int err = decoder->hdl.error;
1000 v4l2_ctrl_handler_free(&decoder->hdl);
1004 v4l2_ctrl_handler_setup(&decoder->hdl);
1006 v4l2_info(sd, "%s decoder driver registered !!\n", sd->name);
1013 * tvp514x_remove() - decoder driver i2c remove handler
1014 * @client: i2c driver client device structure
1016 * Unregister decoder as an i2c client device and V4L2
1017 * device. Complement of tvp514x_probe().
1019 static int tvp514x_remove(struct i2c_client *client)
1021 struct v4l2_subdev *sd = i2c_get_clientdata(client);
1022 struct tvp514x_decoder *decoder = to_decoder(sd);
1024 v4l2_device_unregister_subdev(sd);
1025 v4l2_ctrl_handler_free(&decoder->hdl);
1029 /* TVP5146 Init/Power on Sequence */
1030 static const struct tvp514x_reg tvp5146_init_reg_seq[] = {
1031 {TOK_WRITE, REG_VBUS_ADDRESS_ACCESS1, 0x02},
1032 {TOK_WRITE, REG_VBUS_ADDRESS_ACCESS2, 0x00},
1033 {TOK_WRITE, REG_VBUS_ADDRESS_ACCESS3, 0x80},
1034 {TOK_WRITE, REG_VBUS_DATA_ACCESS_NO_VBUS_ADDR_INCR, 0x01},
1035 {TOK_WRITE, REG_VBUS_ADDRESS_ACCESS1, 0x60},
1036 {TOK_WRITE, REG_VBUS_ADDRESS_ACCESS2, 0x00},
1037 {TOK_WRITE, REG_VBUS_ADDRESS_ACCESS3, 0xB0},
1038 {TOK_WRITE, REG_VBUS_DATA_ACCESS_NO_VBUS_ADDR_INCR, 0x01},
1039 {TOK_WRITE, REG_VBUS_DATA_ACCESS_NO_VBUS_ADDR_INCR, 0x00},
1040 {TOK_WRITE, REG_OPERATION_MODE, 0x01},
1041 {TOK_WRITE, REG_OPERATION_MODE, 0x00},
1045 /* TVP5147 Init/Power on Sequence */
1046 static const struct tvp514x_reg tvp5147_init_reg_seq[] = {
1047 {TOK_WRITE, REG_VBUS_ADDRESS_ACCESS1, 0x02},
1048 {TOK_WRITE, REG_VBUS_ADDRESS_ACCESS2, 0x00},
1049 {TOK_WRITE, REG_VBUS_ADDRESS_ACCESS3, 0x80},
1050 {TOK_WRITE, REG_VBUS_DATA_ACCESS_NO_VBUS_ADDR_INCR, 0x01},
1051 {TOK_WRITE, REG_VBUS_ADDRESS_ACCESS1, 0x60},
1052 {TOK_WRITE, REG_VBUS_ADDRESS_ACCESS2, 0x00},
1053 {TOK_WRITE, REG_VBUS_ADDRESS_ACCESS3, 0xB0},
1054 {TOK_WRITE, REG_VBUS_DATA_ACCESS_NO_VBUS_ADDR_INCR, 0x01},
1055 {TOK_WRITE, REG_VBUS_ADDRESS_ACCESS1, 0x16},
1056 {TOK_WRITE, REG_VBUS_ADDRESS_ACCESS2, 0x00},
1057 {TOK_WRITE, REG_VBUS_ADDRESS_ACCESS3, 0xA0},
1058 {TOK_WRITE, REG_VBUS_DATA_ACCESS_NO_VBUS_ADDR_INCR, 0x16},
1059 {TOK_WRITE, REG_VBUS_ADDRESS_ACCESS1, 0x60},
1060 {TOK_WRITE, REG_VBUS_ADDRESS_ACCESS2, 0x00},
1061 {TOK_WRITE, REG_VBUS_ADDRESS_ACCESS3, 0xB0},
1062 {TOK_WRITE, REG_VBUS_DATA_ACCESS_NO_VBUS_ADDR_INCR, 0x00},
1063 {TOK_WRITE, REG_OPERATION_MODE, 0x01},
1064 {TOK_WRITE, REG_OPERATION_MODE, 0x00},
1068 /* TVP5146M2/TVP5147M1 Init/Power on Sequence */
1069 static const struct tvp514x_reg tvp514xm_init_reg_seq[] = {
1070 {TOK_WRITE, REG_OPERATION_MODE, 0x01},
1071 {TOK_WRITE, REG_OPERATION_MODE, 0x00},
1076 * I2C Device Table -
1078 * name - Name of the actual device/chip.
1079 * driver_data - Driver data
1081 static const struct i2c_device_id tvp514x_id[] = {
1082 {"tvp5146", (unsigned long)tvp5146_init_reg_seq},
1083 {"tvp5146m2", (unsigned long)tvp514xm_init_reg_seq},
1084 {"tvp5147", (unsigned long)tvp5147_init_reg_seq},
1085 {"tvp5147m1", (unsigned long)tvp514xm_init_reg_seq},
1089 MODULE_DEVICE_TABLE(i2c, tvp514x_id);
1091 static struct i2c_driver tvp514x_driver = {
1093 .owner = THIS_MODULE,
1094 .name = TVP514X_MODULE_NAME,
1096 .probe = tvp514x_probe,
1097 .remove = tvp514x_remove,
1098 .id_table = tvp514x_id,
1101 module_i2c_driver(tvp514x_driver);