3 * (c) 2004 Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]
5 * Extended 3 / 2005 by Hartmut Hackmann to support various
6 * cards with the tda10046 DVB-T channel decoder
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License as published by
10 * the Free Software Foundation; either version 2 of the License, or
11 * (at your option) any later version.
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
23 #include <linux/init.h>
24 #include <linux/list.h>
25 #include <linux/module.h>
26 #include <linux/kernel.h>
27 #include <linux/delay.h>
28 #include <linux/kthread.h>
29 #include <linux/suspend.h>
31 #include "saa7134-reg.h"
33 #include <media/v4l2-common.h>
35 #include <dvb_frontend.h>
38 #include "mt352_priv.h" /* FIXME */
41 #include "tuner-xc2028.h"
50 #include "tuner-simple.h"
66 MODULE_AUTHOR("Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]");
67 MODULE_LICENSE("GPL");
69 static unsigned int antenna_pwr;
71 module_param(antenna_pwr, int, 0444);
72 MODULE_PARM_DESC(antenna_pwr,"enable antenna power (Pinnacle 300i)");
74 static int use_frontend;
75 module_param(use_frontend, int, 0644);
76 MODULE_PARM_DESC(use_frontend,"for cards with multiple frontends (0: terrestrial, 1: satellite)");
79 module_param(debug, int, 0644);
80 MODULE_PARM_DESC(debug, "Turn on/off module debugging (default:off).");
82 DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
84 #define dprintk(fmt, arg...) do { if (debug) \
85 printk(KERN_DEBUG "%s/dvb: " fmt, dev->name , ## arg); } while(0)
88 #define wprintk(fmt, arg...) \
89 printk(KERN_WARNING "%s/dvb: " fmt, dev->name, ## arg)
91 /* ------------------------------------------------------------------
92 * mt352 based DVB-T cards
95 static int pinnacle_antenna_pwr(struct saa7134_dev *dev, int on)
100 saa_setl(SAA7134_GPIO_GPMODE0 >> 2, (1 << 26));
101 saa_clearl(SAA7134_GPIO_GPSTATUS0 >> 2, (1 << 26));
105 saa_setl(SAA7134_GPIO_GPMODE0 >> 2, (1 << 26));
106 saa_setl(SAA7134_GPIO_GPSTATUS0 >> 2, (1 << 26));
109 saa_setl(SAA7134_GPIO_GPMODE0 >> 2, (1 << 28));
110 saa_clearl(SAA7134_GPIO_GPSTATUS0 >> 2, (1 << 28));
112 saa_setl(SAA7134_GPIO_GPSTATUS0 >> 2, (1 << 28));
114 ok = saa_readl(SAA7134_GPIO_GPSTATUS0) & (1 << 27);
115 dprintk("%s %s\n", __func__, ok ? "on" : "off");
118 saa_clearl(SAA7134_GPIO_GPSTATUS0 >> 2, (1 << 26));
122 static int mt352_pinnacle_init(struct dvb_frontend* fe)
124 static u8 clock_config [] = { CLOCK_CTL, 0x3d, 0x28 };
125 static u8 reset [] = { RESET, 0x80 };
126 static u8 adc_ctl_1_cfg [] = { ADC_CTL_1, 0x40 };
127 static u8 agc_cfg [] = { AGC_TARGET, 0x28, 0xa0 };
128 static u8 capt_range_cfg[] = { CAPT_RANGE, 0x31 };
129 static u8 fsm_ctl_cfg[] = { 0x7b, 0x04 };
130 static u8 gpp_ctl_cfg [] = { GPP_CTL, 0x0f };
131 static u8 scan_ctl_cfg [] = { SCAN_CTL, 0x0d };
132 static u8 irq_cfg [] = { INTERRUPT_EN_0, 0x00, 0x00, 0x00, 0x00 };
133 struct saa7134_dev *dev= fe->dvb->priv;
135 dprintk("%s called\n", __func__);
137 mt352_write(fe, clock_config, sizeof(clock_config));
139 mt352_write(fe, reset, sizeof(reset));
140 mt352_write(fe, adc_ctl_1_cfg, sizeof(adc_ctl_1_cfg));
141 mt352_write(fe, agc_cfg, sizeof(agc_cfg));
142 mt352_write(fe, capt_range_cfg, sizeof(capt_range_cfg));
143 mt352_write(fe, gpp_ctl_cfg, sizeof(gpp_ctl_cfg));
145 mt352_write(fe, fsm_ctl_cfg, sizeof(fsm_ctl_cfg));
146 mt352_write(fe, scan_ctl_cfg, sizeof(scan_ctl_cfg));
147 mt352_write(fe, irq_cfg, sizeof(irq_cfg));
152 static int mt352_aver777_init(struct dvb_frontend* fe)
154 static u8 clock_config [] = { CLOCK_CTL, 0x38, 0x2d };
155 static u8 reset [] = { RESET, 0x80 };
156 static u8 adc_ctl_1_cfg [] = { ADC_CTL_1, 0x40 };
157 static u8 agc_cfg [] = { AGC_TARGET, 0x28, 0xa0 };
158 static u8 capt_range_cfg[] = { CAPT_RANGE, 0x33 };
160 mt352_write(fe, clock_config, sizeof(clock_config));
162 mt352_write(fe, reset, sizeof(reset));
163 mt352_write(fe, adc_ctl_1_cfg, sizeof(adc_ctl_1_cfg));
164 mt352_write(fe, agc_cfg, sizeof(agc_cfg));
165 mt352_write(fe, capt_range_cfg, sizeof(capt_range_cfg));
170 static int mt352_avermedia_xc3028_init(struct dvb_frontend *fe)
172 static u8 clock_config [] = { CLOCK_CTL, 0x38, 0x2d };
173 static u8 reset [] = { RESET, 0x80 };
174 static u8 adc_ctl_1_cfg [] = { ADC_CTL_1, 0x40 };
175 static u8 agc_cfg [] = { AGC_TARGET, 0xe };
176 static u8 capt_range_cfg[] = { CAPT_RANGE, 0x33 };
178 mt352_write(fe, clock_config, sizeof(clock_config));
180 mt352_write(fe, reset, sizeof(reset));
181 mt352_write(fe, adc_ctl_1_cfg, sizeof(adc_ctl_1_cfg));
182 mt352_write(fe, agc_cfg, sizeof(agc_cfg));
183 mt352_write(fe, capt_range_cfg, sizeof(capt_range_cfg));
187 static int mt352_pinnacle_tuner_set_params(struct dvb_frontend *fe)
189 struct dtv_frontend_properties *c = &fe->dtv_property_cache;
190 u8 off[] = { 0x00, 0xf1};
191 u8 on[] = { 0x00, 0x71};
192 struct i2c_msg msg = {.addr=0x43, .flags=0, .buf=off, .len = sizeof(off)};
194 struct saa7134_dev *dev = fe->dvb->priv;
195 struct v4l2_frequency f;
197 /* set frequency (mt2050) */
199 f.type = V4L2_TUNER_DIGITAL_TV;
200 f.frequency = c->frequency / 1000 * 16 / 1000;
201 if (fe->ops.i2c_gate_ctrl)
202 fe->ops.i2c_gate_ctrl(fe, 1);
203 i2c_transfer(&dev->i2c_adap, &msg, 1);
204 saa_call_all(dev, tuner, s_frequency, &f);
206 if (fe->ops.i2c_gate_ctrl)
207 fe->ops.i2c_gate_ctrl(fe, 1);
208 i2c_transfer(&dev->i2c_adap, &msg, 1);
210 pinnacle_antenna_pwr(dev, antenna_pwr);
213 return mt352_pinnacle_init(fe);
216 static struct mt352_config pinnacle_300i = {
217 .demod_address = 0x3c >> 1,
221 .demod_init = mt352_pinnacle_init,
224 static struct mt352_config avermedia_777 = {
225 .demod_address = 0xf,
226 .demod_init = mt352_aver777_init,
229 static struct mt352_config avermedia_xc3028_mt352_dev = {
230 .demod_address = (0x1e >> 1),
232 .demod_init = mt352_avermedia_xc3028_init,
235 static struct tda18271_std_map mb86a20s_tda18271_std_map = {
236 .dvbt_6 = { .if_freq = 3300, .agc_mode = 3, .std = 4,
237 .if_lvl = 7, .rfagc_top = 0x37, },
240 static struct tda18271_config kworld_tda18271_config = {
241 .std_map = &mb86a20s_tda18271_std_map,
242 .gate = TDA18271_GATE_DIGITAL,
243 .config = 3, /* Use tuner callback for AGC */
247 static const struct mb86a20s_config kworld_mb86a20s_config = {
248 .demod_address = 0x10,
251 static int kworld_sbtvd_gate_ctrl(struct dvb_frontend* fe, int enable)
253 struct saa7134_dev *dev = fe->dvb->priv;
255 unsigned char initmsg[] = {0x45, 0x97};
256 unsigned char msg_enable[] = {0x45, 0xc1};
257 unsigned char msg_disable[] = {0x45, 0x81};
258 struct i2c_msg msg = {.addr = 0x4b, .flags = 0, .buf = initmsg, .len = 2};
260 if (i2c_transfer(&dev->i2c_adap, &msg, 1) != 1) {
261 wprintk("could not access the I2C gate\n");
265 msg.buf = msg_enable;
267 msg.buf = msg_disable;
268 if (i2c_transfer(&dev->i2c_adap, &msg, 1) != 1) {
269 wprintk("could not access the I2C gate\n");
276 /* ==================================================================
277 * tda1004x based DVB-T cards, helper functions
280 static int philips_tda1004x_request_firmware(struct dvb_frontend *fe,
281 const struct firmware **fw, char *name)
283 struct saa7134_dev *dev = fe->dvb->priv;
284 return request_firmware(fw, name, &dev->pci->dev);
287 /* ------------------------------------------------------------------
288 * these tuners are tu1216, td1316(a)
291 static int philips_tda6651_pll_set(struct dvb_frontend *fe)
293 struct dtv_frontend_properties *c = &fe->dtv_property_cache;
294 struct saa7134_dev *dev = fe->dvb->priv;
295 struct tda1004x_state *state = fe->demodulator_priv;
296 u8 addr = state->config->tuner_address;
298 struct i2c_msg tuner_msg = {.addr = addr,.flags = 0,.buf = tuner_buf,.len =
300 int tuner_frequency = 0;
303 /* determine charge pump */
304 tuner_frequency = c->frequency + 36166000;
305 if (tuner_frequency < 87000000)
307 else if (tuner_frequency < 130000000)
309 else if (tuner_frequency < 160000000)
311 else if (tuner_frequency < 200000000)
313 else if (tuner_frequency < 290000000)
315 else if (tuner_frequency < 420000000)
317 else if (tuner_frequency < 480000000)
319 else if (tuner_frequency < 620000000)
321 else if (tuner_frequency < 830000000)
323 else if (tuner_frequency < 895000000)
329 if (c->frequency < 49000000)
331 else if (c->frequency < 161000000)
333 else if (c->frequency < 444000000)
335 else if (c->frequency < 861000000)
340 /* setup PLL filter */
341 switch (c->bandwidth_hz) {
359 * ((36166000+((1000000/6)/2)) + Finput)/(1000000/6)
361 tuner_frequency = (((c->frequency / 1000) * 6) + 217496) / 1000;
363 /* setup tuner buffer */
364 tuner_buf[0] = (tuner_frequency >> 8) & 0x7f;
365 tuner_buf[1] = tuner_frequency & 0xff;
367 tuner_buf[3] = (cp << 5) | (filter << 3) | band;
369 if (fe->ops.i2c_gate_ctrl)
370 fe->ops.i2c_gate_ctrl(fe, 1);
371 if (i2c_transfer(&dev->i2c_adap, &tuner_msg, 1) != 1) {
372 wprintk("could not write to tuner at addr: 0x%02x\n",
380 static int philips_tu1216_init(struct dvb_frontend *fe)
382 struct saa7134_dev *dev = fe->dvb->priv;
383 struct tda1004x_state *state = fe->demodulator_priv;
384 u8 addr = state->config->tuner_address;
385 static u8 tu1216_init[] = { 0x0b, 0xf5, 0x85, 0xab };
386 struct i2c_msg tuner_msg = {.addr = addr,.flags = 0,.buf = tu1216_init,.len = sizeof(tu1216_init) };
388 /* setup PLL configuration */
389 if (fe->ops.i2c_gate_ctrl)
390 fe->ops.i2c_gate_ctrl(fe, 1);
391 if (i2c_transfer(&dev->i2c_adap, &tuner_msg, 1) != 1)
398 /* ------------------------------------------------------------------ */
400 static struct tda1004x_config philips_tu1216_60_config = {
401 .demod_address = 0x8,
404 .xtal_freq = TDA10046_XTAL_4M,
405 .agc_config = TDA10046_AGC_DEFAULT,
406 .if_freq = TDA10046_FREQ_3617,
407 .tuner_address = 0x60,
408 .request_firmware = philips_tda1004x_request_firmware
411 static struct tda1004x_config philips_tu1216_61_config = {
413 .demod_address = 0x8,
416 .xtal_freq = TDA10046_XTAL_4M,
417 .agc_config = TDA10046_AGC_DEFAULT,
418 .if_freq = TDA10046_FREQ_3617,
419 .tuner_address = 0x61,
420 .request_firmware = philips_tda1004x_request_firmware
423 /* ------------------------------------------------------------------ */
425 static int philips_td1316_tuner_init(struct dvb_frontend *fe)
427 struct saa7134_dev *dev = fe->dvb->priv;
428 struct tda1004x_state *state = fe->demodulator_priv;
429 u8 addr = state->config->tuner_address;
430 static u8 msg[] = { 0x0b, 0xf5, 0x86, 0xab };
431 struct i2c_msg init_msg = {.addr = addr,.flags = 0,.buf = msg,.len = sizeof(msg) };
433 /* setup PLL configuration */
434 if (fe->ops.i2c_gate_ctrl)
435 fe->ops.i2c_gate_ctrl(fe, 1);
436 if (i2c_transfer(&dev->i2c_adap, &init_msg, 1) != 1)
441 static int philips_td1316_tuner_set_params(struct dvb_frontend *fe)
443 return philips_tda6651_pll_set(fe);
446 static int philips_td1316_tuner_sleep(struct dvb_frontend *fe)
448 struct saa7134_dev *dev = fe->dvb->priv;
449 struct tda1004x_state *state = fe->demodulator_priv;
450 u8 addr = state->config->tuner_address;
451 static u8 msg[] = { 0x0b, 0xdc, 0x86, 0xa4 };
452 struct i2c_msg analog_msg = {.addr = addr,.flags = 0,.buf = msg,.len = sizeof(msg) };
454 /* switch the tuner to analog mode */
455 if (fe->ops.i2c_gate_ctrl)
456 fe->ops.i2c_gate_ctrl(fe, 1);
457 if (i2c_transfer(&dev->i2c_adap, &analog_msg, 1) != 1)
462 /* ------------------------------------------------------------------ */
464 static int philips_europa_tuner_init(struct dvb_frontend *fe)
466 struct saa7134_dev *dev = fe->dvb->priv;
467 static u8 msg[] = { 0x00, 0x40};
468 struct i2c_msg init_msg = {.addr = 0x43,.flags = 0,.buf = msg,.len = sizeof(msg) };
471 if (philips_td1316_tuner_init(fe))
474 if (i2c_transfer(&dev->i2c_adap, &init_msg, 1) != 1)
480 static int philips_europa_tuner_sleep(struct dvb_frontend *fe)
482 struct saa7134_dev *dev = fe->dvb->priv;
484 static u8 msg[] = { 0x00, 0x14 };
485 struct i2c_msg analog_msg = {.addr = 0x43,.flags = 0,.buf = msg,.len = sizeof(msg) };
487 if (philips_td1316_tuner_sleep(fe))
490 /* switch the board to analog mode */
491 if (fe->ops.i2c_gate_ctrl)
492 fe->ops.i2c_gate_ctrl(fe, 1);
493 i2c_transfer(&dev->i2c_adap, &analog_msg, 1);
497 static int philips_europa_demod_sleep(struct dvb_frontend *fe)
499 struct saa7134_dev *dev = fe->dvb->priv;
501 if (dev->original_demod_sleep)
502 dev->original_demod_sleep(fe);
503 fe->ops.i2c_gate_ctrl(fe, 1);
507 static struct tda1004x_config philips_europa_config = {
509 .demod_address = 0x8,
512 .xtal_freq = TDA10046_XTAL_4M,
513 .agc_config = TDA10046_AGC_IFO_AUTO_POS,
514 .if_freq = TDA10046_FREQ_052,
515 .tuner_address = 0x61,
516 .request_firmware = philips_tda1004x_request_firmware
519 static struct tda1004x_config medion_cardbus = {
520 .demod_address = 0x08,
523 .xtal_freq = TDA10046_XTAL_16M,
524 .agc_config = TDA10046_AGC_IFO_AUTO_NEG,
525 .if_freq = TDA10046_FREQ_3613,
526 .tuner_address = 0x61,
527 .request_firmware = philips_tda1004x_request_firmware
530 static struct tda1004x_config technotrend_budget_t3000_config = {
531 .demod_address = 0x8,
534 .xtal_freq = TDA10046_XTAL_4M,
535 .agc_config = TDA10046_AGC_DEFAULT,
536 .if_freq = TDA10046_FREQ_3617,
537 .tuner_address = 0x63,
538 .request_firmware = philips_tda1004x_request_firmware
541 /* ------------------------------------------------------------------
542 * tda 1004x based cards with philips silicon tuner
545 static int tda8290_i2c_gate_ctrl( struct dvb_frontend* fe, int enable)
547 struct tda1004x_state *state = fe->demodulator_priv;
549 u8 addr = state->config->i2c_gate;
550 static u8 tda8290_close[] = { 0x21, 0xc0};
551 static u8 tda8290_open[] = { 0x21, 0x80};
552 struct i2c_msg tda8290_msg = {.addr = addr,.flags = 0, .len = 2};
554 tda8290_msg.buf = tda8290_close;
556 tda8290_msg.buf = tda8290_open;
558 if (i2c_transfer(state->i2c, &tda8290_msg, 1) != 1) {
559 struct saa7134_dev *dev = fe->dvb->priv;
560 wprintk("could not access tda8290 I2C gate\n");
567 static int philips_tda827x_tuner_init(struct dvb_frontend *fe)
569 struct saa7134_dev *dev = fe->dvb->priv;
570 struct tda1004x_state *state = fe->demodulator_priv;
572 switch (state->config->antenna_switch) {
574 case 1: dprintk("setting GPIO21 to 0 (TV antenna?)\n");
575 saa7134_set_gpio(dev, 21, 0);
577 case 2: dprintk("setting GPIO21 to 1 (Radio antenna?)\n");
578 saa7134_set_gpio(dev, 21, 1);
584 static int philips_tda827x_tuner_sleep(struct dvb_frontend *fe)
586 struct saa7134_dev *dev = fe->dvb->priv;
587 struct tda1004x_state *state = fe->demodulator_priv;
589 switch (state->config->antenna_switch) {
591 case 1: dprintk("setting GPIO21 to 1 (Radio antenna?)\n");
592 saa7134_set_gpio(dev, 21, 1);
594 case 2: dprintk("setting GPIO21 to 0 (TV antenna?)\n");
595 saa7134_set_gpio(dev, 21, 0);
601 static int configure_tda827x_fe(struct saa7134_dev *dev,
602 struct tda1004x_config *cdec_conf,
603 struct tda827x_config *tuner_conf)
605 struct videobuf_dvb_frontend *fe0;
607 /* Get the first frontend */
608 fe0 = videobuf_dvb_get_frontend(&dev->frontends, 1);
613 fe0->dvb.frontend = dvb_attach(tda10046_attach, cdec_conf, &dev->i2c_adap);
614 if (fe0->dvb.frontend) {
615 if (cdec_conf->i2c_gate)
616 fe0->dvb.frontend->ops.i2c_gate_ctrl = tda8290_i2c_gate_ctrl;
617 if (dvb_attach(tda827x_attach, fe0->dvb.frontend,
618 cdec_conf->tuner_address,
619 &dev->i2c_adap, tuner_conf))
622 wprintk("no tda827x tuner found at addr: %02x\n",
623 cdec_conf->tuner_address);
628 /* ------------------------------------------------------------------ */
630 static struct tda827x_config tda827x_cfg_0 = {
631 .init = philips_tda827x_tuner_init,
632 .sleep = philips_tda827x_tuner_sleep,
637 static struct tda827x_config tda827x_cfg_1 = {
638 .init = philips_tda827x_tuner_init,
639 .sleep = philips_tda827x_tuner_sleep,
644 static struct tda827x_config tda827x_cfg_2 = {
645 .init = philips_tda827x_tuner_init,
646 .sleep = philips_tda827x_tuner_sleep,
651 static struct tda827x_config tda827x_cfg_2_sw42 = {
652 .init = philips_tda827x_tuner_init,
653 .sleep = philips_tda827x_tuner_sleep,
658 /* ------------------------------------------------------------------ */
660 static struct tda1004x_config tda827x_lifeview_config = {
661 .demod_address = 0x08,
664 .xtal_freq = TDA10046_XTAL_16M,
665 .agc_config = TDA10046_AGC_TDA827X,
666 .gpio_config = TDA10046_GP11_I,
667 .if_freq = TDA10046_FREQ_045,
668 .tuner_address = 0x60,
669 .request_firmware = philips_tda1004x_request_firmware
672 static struct tda1004x_config philips_tiger_config = {
673 .demod_address = 0x08,
676 .xtal_freq = TDA10046_XTAL_16M,
677 .agc_config = TDA10046_AGC_TDA827X,
678 .gpio_config = TDA10046_GP11_I,
679 .if_freq = TDA10046_FREQ_045,
681 .tuner_address = 0x61,
683 .request_firmware = philips_tda1004x_request_firmware
686 static struct tda1004x_config cinergy_ht_config = {
687 .demod_address = 0x08,
690 .xtal_freq = TDA10046_XTAL_16M,
691 .agc_config = TDA10046_AGC_TDA827X,
692 .gpio_config = TDA10046_GP01_I,
693 .if_freq = TDA10046_FREQ_045,
695 .tuner_address = 0x61,
696 .request_firmware = philips_tda1004x_request_firmware
699 static struct tda1004x_config cinergy_ht_pci_config = {
700 .demod_address = 0x08,
703 .xtal_freq = TDA10046_XTAL_16M,
704 .agc_config = TDA10046_AGC_TDA827X,
705 .gpio_config = TDA10046_GP01_I,
706 .if_freq = TDA10046_FREQ_045,
708 .tuner_address = 0x60,
709 .request_firmware = philips_tda1004x_request_firmware
712 static struct tda1004x_config philips_tiger_s_config = {
713 .demod_address = 0x08,
716 .xtal_freq = TDA10046_XTAL_16M,
717 .agc_config = TDA10046_AGC_TDA827X,
718 .gpio_config = TDA10046_GP01_I,
719 .if_freq = TDA10046_FREQ_045,
721 .tuner_address = 0x61,
723 .request_firmware = philips_tda1004x_request_firmware
726 static struct tda1004x_config pinnacle_pctv_310i_config = {
727 .demod_address = 0x08,
730 .xtal_freq = TDA10046_XTAL_16M,
731 .agc_config = TDA10046_AGC_TDA827X,
732 .gpio_config = TDA10046_GP11_I,
733 .if_freq = TDA10046_FREQ_045,
735 .tuner_address = 0x61,
736 .request_firmware = philips_tda1004x_request_firmware
739 static struct tda1004x_config hauppauge_hvr_1110_config = {
740 .demod_address = 0x08,
743 .xtal_freq = TDA10046_XTAL_16M,
744 .agc_config = TDA10046_AGC_TDA827X,
745 .gpio_config = TDA10046_GP11_I,
746 .if_freq = TDA10046_FREQ_045,
748 .tuner_address = 0x61,
749 .request_firmware = philips_tda1004x_request_firmware
752 static struct tda1004x_config asus_p7131_dual_config = {
753 .demod_address = 0x08,
756 .xtal_freq = TDA10046_XTAL_16M,
757 .agc_config = TDA10046_AGC_TDA827X,
758 .gpio_config = TDA10046_GP11_I,
759 .if_freq = TDA10046_FREQ_045,
761 .tuner_address = 0x61,
763 .request_firmware = philips_tda1004x_request_firmware
766 static struct tda1004x_config lifeview_trio_config = {
767 .demod_address = 0x09,
770 .xtal_freq = TDA10046_XTAL_16M,
771 .agc_config = TDA10046_AGC_TDA827X,
772 .gpio_config = TDA10046_GP00_I,
773 .if_freq = TDA10046_FREQ_045,
774 .tuner_address = 0x60,
775 .request_firmware = philips_tda1004x_request_firmware
778 static struct tda1004x_config tevion_dvbt220rf_config = {
779 .demod_address = 0x08,
782 .xtal_freq = TDA10046_XTAL_16M,
783 .agc_config = TDA10046_AGC_TDA827X,
784 .gpio_config = TDA10046_GP11_I,
785 .if_freq = TDA10046_FREQ_045,
786 .tuner_address = 0x60,
787 .request_firmware = philips_tda1004x_request_firmware
790 static struct tda1004x_config md8800_dvbt_config = {
791 .demod_address = 0x08,
794 .xtal_freq = TDA10046_XTAL_16M,
795 .agc_config = TDA10046_AGC_TDA827X,
796 .gpio_config = TDA10046_GP01_I,
797 .if_freq = TDA10046_FREQ_045,
799 .tuner_address = 0x60,
800 .request_firmware = philips_tda1004x_request_firmware
803 static struct tda1004x_config asus_p7131_4871_config = {
804 .demod_address = 0x08,
807 .xtal_freq = TDA10046_XTAL_16M,
808 .agc_config = TDA10046_AGC_TDA827X,
809 .gpio_config = TDA10046_GP01_I,
810 .if_freq = TDA10046_FREQ_045,
812 .tuner_address = 0x61,
814 .request_firmware = philips_tda1004x_request_firmware
817 static struct tda1004x_config asus_p7131_hybrid_lna_config = {
818 .demod_address = 0x08,
821 .xtal_freq = TDA10046_XTAL_16M,
822 .agc_config = TDA10046_AGC_TDA827X,
823 .gpio_config = TDA10046_GP11_I,
824 .if_freq = TDA10046_FREQ_045,
826 .tuner_address = 0x61,
828 .request_firmware = philips_tda1004x_request_firmware
831 static struct tda1004x_config kworld_dvb_t_210_config = {
832 .demod_address = 0x08,
835 .xtal_freq = TDA10046_XTAL_16M,
836 .agc_config = TDA10046_AGC_TDA827X,
837 .gpio_config = TDA10046_GP11_I,
838 .if_freq = TDA10046_FREQ_045,
840 .tuner_address = 0x61,
842 .request_firmware = philips_tda1004x_request_firmware
845 static struct tda1004x_config avermedia_super_007_config = {
846 .demod_address = 0x08,
849 .xtal_freq = TDA10046_XTAL_16M,
850 .agc_config = TDA10046_AGC_TDA827X,
851 .gpio_config = TDA10046_GP01_I,
852 .if_freq = TDA10046_FREQ_045,
854 .tuner_address = 0x60,
856 .request_firmware = philips_tda1004x_request_firmware
859 static struct tda1004x_config twinhan_dtv_dvb_3056_config = {
860 .demod_address = 0x08,
863 .xtal_freq = TDA10046_XTAL_16M,
864 .agc_config = TDA10046_AGC_TDA827X,
865 .gpio_config = TDA10046_GP01_I,
866 .if_freq = TDA10046_FREQ_045,
868 .tuner_address = 0x61,
870 .request_firmware = philips_tda1004x_request_firmware
873 static struct tda1004x_config asus_tiger_3in1_config = {
874 .demod_address = 0x0b,
877 .xtal_freq = TDA10046_XTAL_16M,
878 .agc_config = TDA10046_AGC_TDA827X,
879 .gpio_config = TDA10046_GP11_I,
880 .if_freq = TDA10046_FREQ_045,
882 .tuner_address = 0x61,
884 .request_firmware = philips_tda1004x_request_firmware
887 static struct tda1004x_config asus_ps3_100_config = {
888 .demod_address = 0x0b,
891 .xtal_freq = TDA10046_XTAL_16M,
892 .agc_config = TDA10046_AGC_TDA827X,
893 .gpio_config = TDA10046_GP11_I,
894 .if_freq = TDA10046_FREQ_045,
896 .tuner_address = 0x61,
898 .request_firmware = philips_tda1004x_request_firmware
901 /* ------------------------------------------------------------------
902 * special case: this card uses saa713x GPIO22 for the mode switch
905 static int ads_duo_tuner_init(struct dvb_frontend *fe)
907 struct saa7134_dev *dev = fe->dvb->priv;
908 philips_tda827x_tuner_init(fe);
909 /* route TDA8275a AGC input to the channel decoder */
910 saa7134_set_gpio(dev, 22, 1);
914 static int ads_duo_tuner_sleep(struct dvb_frontend *fe)
916 struct saa7134_dev *dev = fe->dvb->priv;
917 /* route TDA8275a AGC input to the analog IF chip*/
918 saa7134_set_gpio(dev, 22, 0);
919 philips_tda827x_tuner_sleep(fe);
923 static struct tda827x_config ads_duo_cfg = {
924 .init = ads_duo_tuner_init,
925 .sleep = ads_duo_tuner_sleep,
929 static struct tda1004x_config ads_tech_duo_config = {
930 .demod_address = 0x08,
933 .xtal_freq = TDA10046_XTAL_16M,
934 .agc_config = TDA10046_AGC_TDA827X,
935 .gpio_config = TDA10046_GP00_I,
936 .if_freq = TDA10046_FREQ_045,
937 .tuner_address = 0x61,
938 .request_firmware = philips_tda1004x_request_firmware
941 static struct zl10353_config behold_h6_config = {
942 .demod_address = 0x1e>>1,
945 .disable_i2c_gate_ctrl = 1,
948 static struct xc5000_config behold_x7_tunerconfig = {
949 .i2c_address = 0xc2>>1,
951 .radio_input = XC5000_RADIO_FM1,
954 static struct zl10353_config behold_x7_config = {
955 .demod_address = 0x1e>>1,
959 .disable_i2c_gate_ctrl = 1,
962 static struct zl10353_config videomate_t750_zl10353_config = {
963 .demod_address = 0x0f,
966 .disable_i2c_gate_ctrl = 1,
969 static struct qt1010_config videomate_t750_qt1010_config = {
974 /* ==================================================================
975 * tda10086 based DVB-S cards, helper functions
978 static struct tda10086_config flydvbs = {
979 .demod_address = 0x0e,
982 .xtal_freq = TDA10086_XTAL_16M,
985 static struct tda10086_config sd1878_4m = {
986 .demod_address = 0x0e,
989 .xtal_freq = TDA10086_XTAL_4M,
992 /* ------------------------------------------------------------------
993 * special case: lnb supply is connected to the gated i2c
996 static int md8800_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
999 struct saa7134_dev *dev = fe->dvb->priv;
1000 if (fe->ops.i2c_gate_ctrl) {
1001 fe->ops.i2c_gate_ctrl(fe, 1);
1002 if (dev->original_set_voltage)
1003 res = dev->original_set_voltage(fe, voltage);
1004 fe->ops.i2c_gate_ctrl(fe, 0);
1009 static int md8800_set_high_voltage(struct dvb_frontend *fe, long arg)
1012 struct saa7134_dev *dev = fe->dvb->priv;
1013 if (fe->ops.i2c_gate_ctrl) {
1014 fe->ops.i2c_gate_ctrl(fe, 1);
1015 if (dev->original_set_high_voltage)
1016 res = dev->original_set_high_voltage(fe, arg);
1017 fe->ops.i2c_gate_ctrl(fe, 0);
1022 static int md8800_set_voltage2(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
1024 struct saa7134_dev *dev = fe->dvb->priv;
1025 u8 wbuf[2] = { 0x1f, 00 };
1027 struct i2c_msg msg[] = { { .addr = 0x08, .flags = 0, .buf = wbuf, .len = 1 },
1028 { .addr = 0x08, .flags = I2C_M_RD, .buf = &rbuf, .len = 1 } };
1030 if (i2c_transfer(&dev->i2c_adap, msg, 2) != 2)
1032 /* NOTE: this assumes that gpo1 is used, it might be bit 5 (gpo2) */
1033 if (voltage == SEC_VOLTAGE_18)
1034 wbuf[1] = rbuf | 0x10;
1036 wbuf[1] = rbuf & 0xef;
1038 i2c_transfer(&dev->i2c_adap, msg, 1);
1042 static int md8800_set_high_voltage2(struct dvb_frontend *fe, long arg)
1044 struct saa7134_dev *dev = fe->dvb->priv;
1045 wprintk("%s: sorry can't set high LNB supply voltage from here\n", __func__);
1049 /* ==================================================================
1050 * nxt200x based ATSC cards, helper functions
1053 static struct nxt200x_config avertvhda180 = {
1054 .demod_address = 0x0a,
1057 static struct nxt200x_config kworldatsc110 = {
1058 .demod_address = 0x0a,
1061 /* ------------------------------------------------------------------ */
1063 static struct mt312_config avertv_a700_mt312 = {
1064 .demod_address = 0x0e,
1065 .voltage_inverted = 1,
1068 static struct zl10036_config avertv_a700_tuner = {
1069 .tuner_address = 0x60,
1072 static struct mt312_config zl10313_compro_s350_config = {
1073 .demod_address = 0x0e,
1076 static struct mt312_config zl10313_avermedia_a706_config = {
1077 .demod_address = 0x0e,
1080 static struct lgdt3305_config hcw_lgdt3305_config = {
1082 .mpeg_mode = LGDT3305_MPEG_SERIAL,
1083 .tpclk_edge = LGDT3305_TPCLK_RISING_EDGE,
1084 .tpvalid_polarity = LGDT3305_TP_VALID_HIGH,
1086 .spectral_inversion = 1,
1091 static struct tda10048_config hcw_tda10048_config = {
1092 .demod_address = 0x10 >> 1,
1093 .output_mode = TDA10048_SERIAL_OUTPUT,
1094 .fwbulkwritelen = TDA10048_BULKWRITE_200,
1095 .inversion = TDA10048_INVERSION_ON,
1096 .dtv6_if_freq_khz = TDA10048_IF_3300,
1097 .dtv7_if_freq_khz = TDA10048_IF_3500,
1098 .dtv8_if_freq_khz = TDA10048_IF_4000,
1099 .clk_freq_khz = TDA10048_CLK_16000,
1100 .disable_gate_access = 1,
1103 static struct tda18271_std_map hauppauge_tda18271_std_map = {
1104 .atsc_6 = { .if_freq = 3250, .agc_mode = 3, .std = 4,
1105 .if_lvl = 1, .rfagc_top = 0x58, },
1106 .qam_6 = { .if_freq = 4000, .agc_mode = 3, .std = 5,
1107 .if_lvl = 1, .rfagc_top = 0x58, },
1110 static struct tda18271_config hcw_tda18271_config = {
1111 .std_map = &hauppauge_tda18271_std_map,
1112 .gate = TDA18271_GATE_ANALOG,
1114 .output_opt = TDA18271_OUTPUT_LT_OFF,
1117 static struct tda829x_config tda829x_no_probe = {
1118 .probe_tuner = TDA829X_DONT_PROBE,
1121 static struct tda10048_config zolid_tda10048_config = {
1122 .demod_address = 0x10 >> 1,
1123 .output_mode = TDA10048_PARALLEL_OUTPUT,
1124 .fwbulkwritelen = TDA10048_BULKWRITE_200,
1125 .inversion = TDA10048_INVERSION_ON,
1126 .dtv6_if_freq_khz = TDA10048_IF_3300,
1127 .dtv7_if_freq_khz = TDA10048_IF_3500,
1128 .dtv8_if_freq_khz = TDA10048_IF_4000,
1129 .clk_freq_khz = TDA10048_CLK_16000,
1130 .disable_gate_access = 1,
1133 static struct tda18271_config zolid_tda18271_config = {
1134 .gate = TDA18271_GATE_ANALOG,
1137 static struct tda10048_config dtv1000s_tda10048_config = {
1138 .demod_address = 0x10 >> 1,
1139 .output_mode = TDA10048_PARALLEL_OUTPUT,
1140 .fwbulkwritelen = TDA10048_BULKWRITE_200,
1141 .inversion = TDA10048_INVERSION_ON,
1142 .dtv6_if_freq_khz = TDA10048_IF_3300,
1143 .dtv7_if_freq_khz = TDA10048_IF_3800,
1144 .dtv8_if_freq_khz = TDA10048_IF_4300,
1145 .clk_freq_khz = TDA10048_CLK_16000,
1146 .disable_gate_access = 1,
1149 static struct tda18271_std_map dtv1000s_tda18271_std_map = {
1150 .dvbt_6 = { .if_freq = 3300, .agc_mode = 3, .std = 4,
1151 .if_lvl = 1, .rfagc_top = 0x37, },
1152 .dvbt_7 = { .if_freq = 3800, .agc_mode = 3, .std = 5,
1153 .if_lvl = 1, .rfagc_top = 0x37, },
1154 .dvbt_8 = { .if_freq = 4300, .agc_mode = 3, .std = 6,
1155 .if_lvl = 1, .rfagc_top = 0x37, },
1158 static struct tda18271_config dtv1000s_tda18271_config = {
1159 .std_map = &dtv1000s_tda18271_std_map,
1160 .gate = TDA18271_GATE_ANALOG,
1163 static struct lgs8gxx_config prohdtv_pro2_lgs8g75_config = {
1164 .prod = LGS8GXX_PROD_LGS8G75,
1165 .demod_address = 0x1d,
1169 .if_clk_freq = 30400, /* 30.4 MHz */
1170 .if_freq = 4000, /* 4.00 MHz */
1174 .adc_vpp = 3, /* 2.0 Vpp */
1178 static struct tda18271_config prohdtv_pro2_tda18271_config = {
1179 .gate = TDA18271_GATE_ANALOG,
1180 .output_opt = TDA18271_OUTPUT_LT_OFF,
1183 static struct tda18271_std_map kworld_tda18271_std_map = {
1184 .atsc_6 = { .if_freq = 3250, .agc_mode = 3, .std = 3,
1185 .if_lvl = 6, .rfagc_top = 0x37 },
1186 .qam_6 = { .if_freq = 4000, .agc_mode = 3, .std = 0,
1187 .if_lvl = 6, .rfagc_top = 0x37 },
1190 static struct tda18271_config kworld_pc150u_tda18271_config = {
1191 .std_map = &kworld_tda18271_std_map,
1192 .gate = TDA18271_GATE_ANALOG,
1193 .output_opt = TDA18271_OUTPUT_LT_OFF,
1194 .config = 3, /* Use tuner callback for AGC */
1195 .rf_cal_on_startup = 1
1198 static struct s5h1411_config kworld_s5h1411_config = {
1199 .output_mode = S5H1411_PARALLEL_OUTPUT,
1200 .gpio = S5H1411_GPIO_OFF,
1201 .qam_if = S5H1411_IF_4000,
1202 .vsb_if = S5H1411_IF_3250,
1203 .inversion = S5H1411_INVERSION_ON,
1204 .status_mode = S5H1411_DEMODLOCKING,
1206 S5H1411_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK,
1210 /* ==================================================================
1214 static int dvb_init(struct saa7134_dev *dev)
1217 int attach_xc3028 = 0;
1218 struct videobuf_dvb_frontend *fe0;
1220 /* FIXME: add support for multi-frontend */
1221 mutex_init(&dev->frontends.lock);
1222 INIT_LIST_HEAD(&dev->frontends.felist);
1224 printk(KERN_INFO "%s() allocating 1 frontend\n", __func__);
1225 fe0 = videobuf_dvb_alloc_frontend(&dev->frontends, 1);
1227 printk(KERN_ERR "%s() failed to alloc\n", __func__);
1231 /* init struct videobuf_dvb */
1232 dev->ts.nr_bufs = 32;
1233 dev->ts.nr_packets = 32*4;
1234 fe0->dvb.name = dev->name;
1235 videobuf_queue_sg_init(&fe0->dvb.dvbq, &saa7134_ts_qops,
1236 &dev->pci->dev, &dev->slock,
1237 V4L2_BUF_TYPE_VIDEO_CAPTURE,
1238 V4L2_FIELD_ALTERNATE,
1239 sizeof(struct saa7134_buf),
1242 switch (dev->board) {
1243 case SAA7134_BOARD_PINNACLE_300I_DVBT_PAL:
1244 dprintk("pinnacle 300i dvb setup\n");
1245 fe0->dvb.frontend = dvb_attach(mt352_attach, &pinnacle_300i,
1247 if (fe0->dvb.frontend) {
1248 fe0->dvb.frontend->ops.tuner_ops.set_params = mt352_pinnacle_tuner_set_params;
1251 case SAA7134_BOARD_AVERMEDIA_777:
1252 case SAA7134_BOARD_AVERMEDIA_A16AR:
1253 dprintk("avertv 777 dvb setup\n");
1254 fe0->dvb.frontend = dvb_attach(mt352_attach, &avermedia_777,
1256 if (fe0->dvb.frontend) {
1257 dvb_attach(simple_tuner_attach, fe0->dvb.frontend,
1258 &dev->i2c_adap, 0x61,
1259 TUNER_PHILIPS_TD1316);
1262 case SAA7134_BOARD_AVERMEDIA_A16D:
1263 dprintk("AverMedia A16D dvb setup\n");
1264 fe0->dvb.frontend = dvb_attach(mt352_attach,
1265 &avermedia_xc3028_mt352_dev,
1269 case SAA7134_BOARD_MD7134:
1270 fe0->dvb.frontend = dvb_attach(tda10046_attach,
1273 if (fe0->dvb.frontend) {
1274 dvb_attach(simple_tuner_attach, fe0->dvb.frontend,
1275 &dev->i2c_adap, medion_cardbus.tuner_address,
1276 TUNER_PHILIPS_FMD1216ME_MK3);
1279 case SAA7134_BOARD_PHILIPS_TOUGH:
1280 fe0->dvb.frontend = dvb_attach(tda10046_attach,
1281 &philips_tu1216_60_config,
1283 if (fe0->dvb.frontend) {
1284 fe0->dvb.frontend->ops.tuner_ops.init = philips_tu1216_init;
1285 fe0->dvb.frontend->ops.tuner_ops.set_params = philips_tda6651_pll_set;
1288 case SAA7134_BOARD_FLYDVBTDUO:
1289 case SAA7134_BOARD_FLYDVBT_DUO_CARDBUS:
1290 if (configure_tda827x_fe(dev, &tda827x_lifeview_config,
1291 &tda827x_cfg_0) < 0)
1292 goto detach_frontend;
1294 case SAA7134_BOARD_PHILIPS_EUROPA:
1295 case SAA7134_BOARD_VIDEOMATE_DVBT_300:
1296 case SAA7134_BOARD_ASUS_EUROPA_HYBRID:
1297 fe0->dvb.frontend = dvb_attach(tda10046_attach,
1298 &philips_europa_config,
1300 if (fe0->dvb.frontend) {
1301 dev->original_demod_sleep = fe0->dvb.frontend->ops.sleep;
1302 fe0->dvb.frontend->ops.sleep = philips_europa_demod_sleep;
1303 fe0->dvb.frontend->ops.tuner_ops.init = philips_europa_tuner_init;
1304 fe0->dvb.frontend->ops.tuner_ops.sleep = philips_europa_tuner_sleep;
1305 fe0->dvb.frontend->ops.tuner_ops.set_params = philips_td1316_tuner_set_params;
1308 case SAA7134_BOARD_TECHNOTREND_BUDGET_T3000:
1309 fe0->dvb.frontend = dvb_attach(tda10046_attach,
1310 &technotrend_budget_t3000_config,
1312 if (fe0->dvb.frontend) {
1313 dev->original_demod_sleep = fe0->dvb.frontend->ops.sleep;
1314 fe0->dvb.frontend->ops.sleep = philips_europa_demod_sleep;
1315 fe0->dvb.frontend->ops.tuner_ops.init = philips_europa_tuner_init;
1316 fe0->dvb.frontend->ops.tuner_ops.sleep = philips_europa_tuner_sleep;
1317 fe0->dvb.frontend->ops.tuner_ops.set_params = philips_td1316_tuner_set_params;
1320 case SAA7134_BOARD_VIDEOMATE_DVBT_200:
1321 fe0->dvb.frontend = dvb_attach(tda10046_attach,
1322 &philips_tu1216_61_config,
1324 if (fe0->dvb.frontend) {
1325 fe0->dvb.frontend->ops.tuner_ops.init = philips_tu1216_init;
1326 fe0->dvb.frontend->ops.tuner_ops.set_params = philips_tda6651_pll_set;
1329 case SAA7134_BOARD_KWORLD_DVBT_210:
1330 if (configure_tda827x_fe(dev, &kworld_dvb_t_210_config,
1331 &tda827x_cfg_2) < 0)
1332 goto detach_frontend;
1334 case SAA7134_BOARD_HAUPPAUGE_HVR1120:
1335 fe0->dvb.frontend = dvb_attach(tda10048_attach,
1336 &hcw_tda10048_config,
1338 if (fe0->dvb.frontend != NULL) {
1339 dvb_attach(tda829x_attach, fe0->dvb.frontend,
1340 &dev->i2c_adap, 0x4b,
1342 dvb_attach(tda18271_attach, fe0->dvb.frontend,
1343 0x60, &dev->i2c_adap,
1344 &hcw_tda18271_config);
1347 case SAA7134_BOARD_PHILIPS_TIGER:
1348 if (configure_tda827x_fe(dev, &philips_tiger_config,
1349 &tda827x_cfg_0) < 0)
1350 goto detach_frontend;
1352 case SAA7134_BOARD_PINNACLE_PCTV_310i:
1353 if (configure_tda827x_fe(dev, &pinnacle_pctv_310i_config,
1354 &tda827x_cfg_1) < 0)
1355 goto detach_frontend;
1357 case SAA7134_BOARD_HAUPPAUGE_HVR1110:
1358 if (configure_tda827x_fe(dev, &hauppauge_hvr_1110_config,
1359 &tda827x_cfg_1) < 0)
1360 goto detach_frontend;
1362 case SAA7134_BOARD_HAUPPAUGE_HVR1150:
1363 fe0->dvb.frontend = dvb_attach(lgdt3305_attach,
1364 &hcw_lgdt3305_config,
1366 if (fe0->dvb.frontend) {
1367 dvb_attach(tda829x_attach, fe0->dvb.frontend,
1368 &dev->i2c_adap, 0x4b,
1370 dvb_attach(tda18271_attach, fe0->dvb.frontend,
1371 0x60, &dev->i2c_adap,
1372 &hcw_tda18271_config);
1375 case SAA7134_BOARD_ASUSTeK_P7131_DUAL:
1376 if (configure_tda827x_fe(dev, &asus_p7131_dual_config,
1377 &tda827x_cfg_0) < 0)
1378 goto detach_frontend;
1380 case SAA7134_BOARD_FLYDVBT_LR301:
1381 if (configure_tda827x_fe(dev, &tda827x_lifeview_config,
1382 &tda827x_cfg_0) < 0)
1383 goto detach_frontend;
1385 case SAA7134_BOARD_FLYDVB_TRIO:
1386 if (!use_frontend) { /* terrestrial */
1387 if (configure_tda827x_fe(dev, &lifeview_trio_config,
1388 &tda827x_cfg_0) < 0)
1389 goto detach_frontend;
1390 } else { /* satellite */
1391 fe0->dvb.frontend = dvb_attach(tda10086_attach, &flydvbs, &dev->i2c_adap);
1392 if (fe0->dvb.frontend) {
1393 if (dvb_attach(tda826x_attach, fe0->dvb.frontend, 0x63,
1394 &dev->i2c_adap, 0) == NULL) {
1395 wprintk("%s: Lifeview Trio, No tda826x found!\n", __func__);
1396 goto detach_frontend;
1398 if (dvb_attach(isl6421_attach, fe0->dvb.frontend,
1400 0x08, 0, 0, false) == NULL) {
1401 wprintk("%s: Lifeview Trio, No ISL6421 found!\n", __func__);
1402 goto detach_frontend;
1407 case SAA7134_BOARD_ADS_DUO_CARDBUS_PTV331:
1408 case SAA7134_BOARD_FLYDVBT_HYBRID_CARDBUS:
1409 fe0->dvb.frontend = dvb_attach(tda10046_attach,
1410 &ads_tech_duo_config,
1412 if (fe0->dvb.frontend) {
1413 if (dvb_attach(tda827x_attach,fe0->dvb.frontend,
1414 ads_tech_duo_config.tuner_address, &dev->i2c_adap,
1415 &ads_duo_cfg) == NULL) {
1416 wprintk("no tda827x tuner found at addr: %02x\n",
1417 ads_tech_duo_config.tuner_address);
1418 goto detach_frontend;
1421 wprintk("failed to attach tda10046\n");
1423 case SAA7134_BOARD_TEVION_DVBT_220RF:
1424 if (configure_tda827x_fe(dev, &tevion_dvbt220rf_config,
1425 &tda827x_cfg_0) < 0)
1426 goto detach_frontend;
1428 case SAA7134_BOARD_MEDION_MD8800_QUADRO:
1429 if (!use_frontend) { /* terrestrial */
1430 if (configure_tda827x_fe(dev, &md8800_dvbt_config,
1431 &tda827x_cfg_0) < 0)
1432 goto detach_frontend;
1433 } else { /* satellite */
1434 fe0->dvb.frontend = dvb_attach(tda10086_attach,
1435 &flydvbs, &dev->i2c_adap);
1436 if (fe0->dvb.frontend) {
1437 struct dvb_frontend *fe = fe0->dvb.frontend;
1438 u8 dev_id = dev->eedata[2];
1440 struct i2c_msg msg = {.addr = 0x08, .flags = 0, .len = 1};
1442 if (dvb_attach(tda826x_attach, fe0->dvb.frontend,
1443 0x60, &dev->i2c_adap, 0) == NULL) {
1444 wprintk("%s: Medion Quadro, no tda826x "
1445 "found !\n", __func__);
1446 goto detach_frontend;
1448 if (dev_id != 0x08) {
1449 /* we need to open the i2c gate (we know it exists) */
1450 fe->ops.i2c_gate_ctrl(fe, 1);
1451 if (dvb_attach(isl6405_attach, fe,
1452 &dev->i2c_adap, 0x08, 0, 0) == NULL) {
1453 wprintk("%s: Medion Quadro, no ISL6405 "
1454 "found !\n", __func__);
1455 goto detach_frontend;
1457 if (dev_id == 0x07) {
1458 /* fire up the 2nd section of the LNB supply since
1459 we can't do this from the other section */
1461 i2c_transfer(&dev->i2c_adap, &msg, 1);
1463 fe->ops.i2c_gate_ctrl(fe, 0);
1464 dev->original_set_voltage = fe->ops.set_voltage;
1465 fe->ops.set_voltage = md8800_set_voltage;
1466 dev->original_set_high_voltage = fe->ops.enable_high_lnb_voltage;
1467 fe->ops.enable_high_lnb_voltage = md8800_set_high_voltage;
1469 fe->ops.set_voltage = md8800_set_voltage2;
1470 fe->ops.enable_high_lnb_voltage = md8800_set_high_voltage2;
1475 case SAA7134_BOARD_AVERMEDIA_AVERTVHD_A180:
1476 fe0->dvb.frontend = dvb_attach(nxt200x_attach, &avertvhda180,
1478 if (fe0->dvb.frontend)
1479 dvb_attach(dvb_pll_attach, fe0->dvb.frontend, 0x61,
1480 NULL, DVB_PLL_TDHU2);
1482 case SAA7134_BOARD_ADS_INSTANT_HDTV_PCI:
1483 case SAA7134_BOARD_KWORLD_ATSC110:
1484 fe0->dvb.frontend = dvb_attach(nxt200x_attach, &kworldatsc110,
1486 if (fe0->dvb.frontend)
1487 dvb_attach(simple_tuner_attach, fe0->dvb.frontend,
1488 &dev->i2c_adap, 0x61,
1489 TUNER_PHILIPS_TUV1236D);
1491 case SAA7134_BOARD_KWORLD_PC150U:
1492 saa7134_set_gpio(dev, 18, 1); /* Switch to digital mode */
1493 saa7134_tuner_callback(dev, 0,
1494 TDA18271_CALLBACK_CMD_AGC_ENABLE, 1);
1495 fe0->dvb.frontend = dvb_attach(s5h1411_attach,
1496 &kworld_s5h1411_config,
1498 if (fe0->dvb.frontend != NULL) {
1499 dvb_attach(tda829x_attach, fe0->dvb.frontend,
1500 &dev->i2c_adap, 0x4b,
1502 dvb_attach(tda18271_attach, fe0->dvb.frontend,
1503 0x60, &dev->i2c_adap,
1504 &kworld_pc150u_tda18271_config);
1507 case SAA7134_BOARD_FLYDVBS_LR300:
1508 fe0->dvb.frontend = dvb_attach(tda10086_attach, &flydvbs,
1510 if (fe0->dvb.frontend) {
1511 if (dvb_attach(tda826x_attach, fe0->dvb.frontend, 0x60,
1512 &dev->i2c_adap, 0) == NULL) {
1513 wprintk("%s: No tda826x found!\n", __func__);
1514 goto detach_frontend;
1516 if (dvb_attach(isl6421_attach, fe0->dvb.frontend,
1518 0x08, 0, 0, false) == NULL) {
1519 wprintk("%s: No ISL6421 found!\n", __func__);
1520 goto detach_frontend;
1524 case SAA7134_BOARD_ASUS_EUROPA2_HYBRID:
1525 fe0->dvb.frontend = dvb_attach(tda10046_attach,
1528 if (fe0->dvb.frontend) {
1529 dev->original_demod_sleep = fe0->dvb.frontend->ops.sleep;
1530 fe0->dvb.frontend->ops.sleep = philips_europa_demod_sleep;
1532 dvb_attach(simple_tuner_attach, fe0->dvb.frontend,
1533 &dev->i2c_adap, medion_cardbus.tuner_address,
1534 TUNER_PHILIPS_FMD1216ME_MK3);
1537 case SAA7134_BOARD_VIDEOMATE_DVBT_200A:
1538 fe0->dvb.frontend = dvb_attach(tda10046_attach,
1539 &philips_europa_config,
1541 if (fe0->dvb.frontend) {
1542 fe0->dvb.frontend->ops.tuner_ops.init = philips_td1316_tuner_init;
1543 fe0->dvb.frontend->ops.tuner_ops.set_params = philips_td1316_tuner_set_params;
1546 case SAA7134_BOARD_CINERGY_HT_PCMCIA:
1547 if (configure_tda827x_fe(dev, &cinergy_ht_config,
1548 &tda827x_cfg_0) < 0)
1549 goto detach_frontend;
1551 case SAA7134_BOARD_CINERGY_HT_PCI:
1552 if (configure_tda827x_fe(dev, &cinergy_ht_pci_config,
1553 &tda827x_cfg_0) < 0)
1554 goto detach_frontend;
1556 case SAA7134_BOARD_PHILIPS_TIGER_S:
1557 if (configure_tda827x_fe(dev, &philips_tiger_s_config,
1558 &tda827x_cfg_2) < 0)
1559 goto detach_frontend;
1561 case SAA7134_BOARD_ASUS_P7131_4871:
1562 if (configure_tda827x_fe(dev, &asus_p7131_4871_config,
1563 &tda827x_cfg_2) < 0)
1564 goto detach_frontend;
1566 case SAA7134_BOARD_ASUSTeK_P7131_HYBRID_LNA:
1567 if (configure_tda827x_fe(dev, &asus_p7131_hybrid_lna_config,
1568 &tda827x_cfg_2) < 0)
1569 goto detach_frontend;
1571 case SAA7134_BOARD_AVERMEDIA_SUPER_007:
1572 if (configure_tda827x_fe(dev, &avermedia_super_007_config,
1573 &tda827x_cfg_0) < 0)
1574 goto detach_frontend;
1576 case SAA7134_BOARD_TWINHAN_DTV_DVB_3056:
1577 if (configure_tda827x_fe(dev, &twinhan_dtv_dvb_3056_config,
1578 &tda827x_cfg_2_sw42) < 0)
1579 goto detach_frontend;
1581 case SAA7134_BOARD_PHILIPS_SNAKE:
1582 fe0->dvb.frontend = dvb_attach(tda10086_attach, &flydvbs,
1584 if (fe0->dvb.frontend) {
1585 if (dvb_attach(tda826x_attach, fe0->dvb.frontend, 0x60,
1586 &dev->i2c_adap, 0) == NULL) {
1587 wprintk("%s: No tda826x found!\n", __func__);
1588 goto detach_frontend;
1590 if (dvb_attach(lnbp21_attach, fe0->dvb.frontend,
1591 &dev->i2c_adap, 0, 0) == NULL) {
1592 wprintk("%s: No lnbp21 found!\n", __func__);
1593 goto detach_frontend;
1597 case SAA7134_BOARD_CREATIX_CTX953:
1598 if (configure_tda827x_fe(dev, &md8800_dvbt_config,
1599 &tda827x_cfg_0) < 0)
1600 goto detach_frontend;
1602 case SAA7134_BOARD_MSI_TVANYWHERE_AD11:
1603 if (configure_tda827x_fe(dev, &philips_tiger_s_config,
1604 &tda827x_cfg_2) < 0)
1605 goto detach_frontend;
1607 case SAA7134_BOARD_AVERMEDIA_CARDBUS_506:
1608 dprintk("AverMedia E506R dvb setup\n");
1609 saa7134_set_gpio(dev, 25, 0);
1611 saa7134_set_gpio(dev, 25, 1);
1612 fe0->dvb.frontend = dvb_attach(mt352_attach,
1613 &avermedia_xc3028_mt352_dev,
1617 case SAA7134_BOARD_MD7134_BRIDGE_2:
1618 fe0->dvb.frontend = dvb_attach(tda10086_attach,
1619 &sd1878_4m, &dev->i2c_adap);
1620 if (fe0->dvb.frontend) {
1621 struct dvb_frontend *fe;
1622 if (dvb_attach(dvb_pll_attach, fe0->dvb.frontend, 0x60,
1623 &dev->i2c_adap, DVB_PLL_PHILIPS_SD1878_TDA8261) == NULL) {
1624 wprintk("%s: MD7134 DVB-S, no SD1878 "
1625 "found !\n", __func__);
1626 goto detach_frontend;
1628 /* we need to open the i2c gate (we know it exists) */
1629 fe = fe0->dvb.frontend;
1630 fe->ops.i2c_gate_ctrl(fe, 1);
1631 if (dvb_attach(isl6405_attach, fe,
1632 &dev->i2c_adap, 0x08, 0, 0) == NULL) {
1633 wprintk("%s: MD7134 DVB-S, no ISL6405 "
1634 "found !\n", __func__);
1635 goto detach_frontend;
1637 fe->ops.i2c_gate_ctrl(fe, 0);
1638 dev->original_set_voltage = fe->ops.set_voltage;
1639 fe->ops.set_voltage = md8800_set_voltage;
1640 dev->original_set_high_voltage = fe->ops.enable_high_lnb_voltage;
1641 fe->ops.enable_high_lnb_voltage = md8800_set_high_voltage;
1644 case SAA7134_BOARD_AVERMEDIA_M103:
1645 saa7134_set_gpio(dev, 25, 0);
1647 saa7134_set_gpio(dev, 25, 1);
1648 fe0->dvb.frontend = dvb_attach(mt352_attach,
1649 &avermedia_xc3028_mt352_dev,
1653 case SAA7134_BOARD_ASUSTeK_TIGER_3IN1:
1654 if (!use_frontend) { /* terrestrial */
1655 if (configure_tda827x_fe(dev, &asus_tiger_3in1_config,
1656 &tda827x_cfg_2) < 0)
1657 goto detach_frontend;
1658 } else { /* satellite */
1659 fe0->dvb.frontend = dvb_attach(tda10086_attach,
1660 &flydvbs, &dev->i2c_adap);
1661 if (fe0->dvb.frontend) {
1662 if (dvb_attach(tda826x_attach,
1663 fe0->dvb.frontend, 0x60,
1664 &dev->i2c_adap, 0) == NULL) {
1665 wprintk("%s: Asus Tiger 3in1, no "
1666 "tda826x found!\n", __func__);
1667 goto detach_frontend;
1669 if (dvb_attach(lnbp21_attach, fe0->dvb.frontend,
1670 &dev->i2c_adap, 0, 0) == NULL) {
1671 wprintk("%s: Asus Tiger 3in1, no lnbp21"
1672 " found!\n", __func__);
1673 goto detach_frontend;
1678 case SAA7134_BOARD_ASUSTeK_PS3_100:
1679 if (!use_frontend) { /* terrestrial */
1680 if (configure_tda827x_fe(dev, &asus_ps3_100_config,
1681 &tda827x_cfg_2) < 0)
1682 goto detach_frontend;
1683 } else { /* satellite */
1684 fe0->dvb.frontend = dvb_attach(tda10086_attach,
1685 &flydvbs, &dev->i2c_adap);
1686 if (fe0->dvb.frontend) {
1687 if (dvb_attach(tda826x_attach,
1688 fe0->dvb.frontend, 0x60,
1689 &dev->i2c_adap, 0) == NULL) {
1690 wprintk("%s: Asus My Cinema PS3-100, no "
1691 "tda826x found!\n", __func__);
1692 goto detach_frontend;
1694 if (dvb_attach(lnbp21_attach, fe0->dvb.frontend,
1695 &dev->i2c_adap, 0, 0) == NULL) {
1696 wprintk("%s: Asus My Cinema PS3-100, no lnbp21"
1697 " found!\n", __func__);
1698 goto detach_frontend;
1703 case SAA7134_BOARD_ASUSTeK_TIGER:
1704 if (configure_tda827x_fe(dev, &philips_tiger_config,
1705 &tda827x_cfg_0) < 0)
1706 goto detach_frontend;
1708 case SAA7134_BOARD_BEHOLD_H6:
1709 fe0->dvb.frontend = dvb_attach(zl10353_attach,
1712 if (fe0->dvb.frontend) {
1713 dvb_attach(simple_tuner_attach, fe0->dvb.frontend,
1714 &dev->i2c_adap, 0x61,
1715 TUNER_PHILIPS_FMD1216MEX_MK3);
1718 case SAA7134_BOARD_BEHOLD_X7:
1719 fe0->dvb.frontend = dvb_attach(zl10353_attach,
1722 if (fe0->dvb.frontend) {
1723 dvb_attach(xc5000_attach, fe0->dvb.frontend,
1724 &dev->i2c_adap, &behold_x7_tunerconfig);
1727 case SAA7134_BOARD_BEHOLD_H7:
1728 fe0->dvb.frontend = dvb_attach(zl10353_attach,
1731 if (fe0->dvb.frontend) {
1732 dvb_attach(xc5000_attach, fe0->dvb.frontend,
1733 &dev->i2c_adap, &behold_x7_tunerconfig);
1736 case SAA7134_BOARD_AVERMEDIA_A700_PRO:
1737 case SAA7134_BOARD_AVERMEDIA_A700_HYBRID:
1738 /* Zarlink ZL10313 */
1739 fe0->dvb.frontend = dvb_attach(mt312_attach,
1740 &avertv_a700_mt312, &dev->i2c_adap);
1741 if (fe0->dvb.frontend) {
1742 if (dvb_attach(zl10036_attach, fe0->dvb.frontend,
1743 &avertv_a700_tuner, &dev->i2c_adap) == NULL) {
1744 wprintk("%s: No zl10036 found!\n",
1749 case SAA7134_BOARD_VIDEOMATE_S350:
1750 fe0->dvb.frontend = dvb_attach(mt312_attach,
1751 &zl10313_compro_s350_config, &dev->i2c_adap);
1752 if (fe0->dvb.frontend)
1753 if (dvb_attach(zl10039_attach, fe0->dvb.frontend,
1754 0x60, &dev->i2c_adap) == NULL)
1755 wprintk("%s: No zl10039 found!\n",
1759 case SAA7134_BOARD_VIDEOMATE_T750:
1760 fe0->dvb.frontend = dvb_attach(zl10353_attach,
1761 &videomate_t750_zl10353_config,
1763 if (fe0->dvb.frontend != NULL) {
1764 if (dvb_attach(qt1010_attach,
1767 &videomate_t750_qt1010_config) == NULL)
1768 wprintk("error attaching QT1010\n");
1771 case SAA7134_BOARD_ZOLID_HYBRID_PCI:
1772 fe0->dvb.frontend = dvb_attach(tda10048_attach,
1773 &zolid_tda10048_config,
1775 if (fe0->dvb.frontend != NULL) {
1776 dvb_attach(tda829x_attach, fe0->dvb.frontend,
1777 &dev->i2c_adap, 0x4b,
1779 dvb_attach(tda18271_attach, fe0->dvb.frontend,
1780 0x60, &dev->i2c_adap,
1781 &zolid_tda18271_config);
1784 case SAA7134_BOARD_LEADTEK_WINFAST_DTV1000S:
1785 fe0->dvb.frontend = dvb_attach(tda10048_attach,
1786 &dtv1000s_tda10048_config,
1788 if (fe0->dvb.frontend != NULL) {
1789 dvb_attach(tda829x_attach, fe0->dvb.frontend,
1790 &dev->i2c_adap, 0x4b,
1792 dvb_attach(tda18271_attach, fe0->dvb.frontend,
1793 0x60, &dev->i2c_adap,
1794 &dtv1000s_tda18271_config);
1797 case SAA7134_BOARD_KWORLD_PCI_SBTVD_FULLSEG:
1798 /* Switch to digital mode */
1799 saa7134_tuner_callback(dev, 0,
1800 TDA18271_CALLBACK_CMD_AGC_ENABLE, 1);
1801 fe0->dvb.frontend = dvb_attach(mb86a20s_attach,
1802 &kworld_mb86a20s_config,
1804 if (fe0->dvb.frontend != NULL) {
1805 dvb_attach(tda829x_attach, fe0->dvb.frontend,
1806 &dev->i2c_adap, 0x4b,
1808 fe0->dvb.frontend->ops.i2c_gate_ctrl = kworld_sbtvd_gate_ctrl;
1809 dvb_attach(tda18271_attach, fe0->dvb.frontend,
1810 0x60, &dev->i2c_adap,
1811 &kworld_tda18271_config);
1814 /* mb86a20s need to use the I2C gateway */
1816 case SAA7134_BOARD_MAGICPRO_PROHDTV_PRO2:
1817 fe0->dvb.frontend = dvb_attach(lgs8gxx_attach,
1818 &prohdtv_pro2_lgs8g75_config,
1820 if (fe0->dvb.frontend != NULL) {
1821 dvb_attach(tda829x_attach, fe0->dvb.frontend,
1822 &dev->i2c_adap, 0x4b,
1824 dvb_attach(tda18271_attach, fe0->dvb.frontend,
1825 0x60, &dev->i2c_adap,
1826 &prohdtv_pro2_tda18271_config);
1829 case SAA7134_BOARD_AVERMEDIA_A706:
1830 /* Enable all DVB-S devices now */
1831 /* CE5039 DVB-S tuner SLEEP pin low */
1832 saa7134_set_gpio(dev, 23, 0);
1833 /* CE6313 DVB-S demod SLEEP pin low */
1834 saa7134_set_gpio(dev, 9, 0);
1835 /* CE6313 DVB-S demod RESET# pin high */
1836 saa7134_set_gpio(dev, 25, 1);
1838 fe0->dvb.frontend = dvb_attach(mt312_attach,
1839 &zl10313_avermedia_a706_config, &dev->i2c_adap);
1840 if (fe0->dvb.frontend) {
1841 fe0->dvb.frontend->ops.i2c_gate_ctrl = NULL;
1842 if (dvb_attach(zl10039_attach, fe0->dvb.frontend,
1843 0x60, &dev->i2c_adap) == NULL)
1844 wprintk("%s: No zl10039 found!\n",
1849 wprintk("Huh? unknown DVB card?\n");
1853 if (attach_xc3028) {
1854 struct dvb_frontend *fe;
1855 struct xc2028_config cfg = {
1856 .i2c_adap = &dev->i2c_adap,
1860 if (!fe0->dvb.frontend)
1861 goto detach_frontend;
1863 fe = dvb_attach(xc2028_attach, fe0->dvb.frontend, &cfg);
1865 printk(KERN_ERR "%s/2: xc3028 attach failed\n",
1867 goto detach_frontend;
1871 if (NULL == fe0->dvb.frontend) {
1872 printk(KERN_ERR "%s/dvb: frontend initialization failed\n", dev->name);
1873 goto detach_frontend;
1875 /* define general-purpose callback pointer */
1876 fe0->dvb.frontend->callback = saa7134_tuner_callback;
1878 /* register everything else */
1879 ret = videobuf_dvb_register_bus(&dev->frontends, THIS_MODULE, dev,
1880 &dev->pci->dev, adapter_nr, 0);
1882 /* this sequence is necessary to make the tda1004x load its firmware
1883 * and to enter analog mode of hybrid boards
1886 if (fe0->dvb.frontend->ops.init)
1887 fe0->dvb.frontend->ops.init(fe0->dvb.frontend);
1888 if (fe0->dvb.frontend->ops.sleep)
1889 fe0->dvb.frontend->ops.sleep(fe0->dvb.frontend);
1890 if (fe0->dvb.frontend->ops.tuner_ops.sleep)
1891 fe0->dvb.frontend->ops.tuner_ops.sleep(fe0->dvb.frontend);
1896 videobuf_dvb_dealloc_frontends(&dev->frontends);
1900 static int dvb_fini(struct saa7134_dev *dev)
1902 struct videobuf_dvb_frontend *fe0;
1904 /* Get the first frontend */
1905 fe0 = videobuf_dvb_get_frontend(&dev->frontends, 1);
1909 /* FIXME: I suspect that this code is bogus, since the entry for
1910 Pinnacle 300I DVB-T PAL already defines the proper init to allow
1911 the detection of mt2032 (TDA9887_PORT2_INACTIVE)
1913 if (dev->board == SAA7134_BOARD_PINNACLE_300I_DVBT_PAL) {
1914 struct v4l2_priv_tun_config tda9887_cfg;
1915 static int on = TDA9887_PRESENT | TDA9887_PORT2_INACTIVE;
1917 tda9887_cfg.tuner = TUNER_TDA9887;
1918 tda9887_cfg.priv = &on;
1920 /* otherwise we don't detect the tuner on next insmod */
1921 saa_call_all(dev, tuner, s_config, &tda9887_cfg);
1922 } else if (dev->board == SAA7134_BOARD_MEDION_MD8800_QUADRO) {
1923 if ((dev->eedata[2] == 0x07) && use_frontend) {
1924 /* turn off the 2nd lnb supply */
1926 struct i2c_msg msg = {.addr = 0x08, .buf = &data, .flags = 0, .len = 1};
1927 struct dvb_frontend *fe;
1928 fe = fe0->dvb.frontend;
1929 if (fe->ops.i2c_gate_ctrl) {
1930 fe->ops.i2c_gate_ctrl(fe, 1);
1931 i2c_transfer(&dev->i2c_adap, &msg, 1);
1932 fe->ops.i2c_gate_ctrl(fe, 0);
1936 videobuf_dvb_unregister_bus(&dev->frontends);
1940 static struct saa7134_mpeg_ops dvb_ops = {
1941 .type = SAA7134_MPEG_DVB,
1946 static int __init dvb_register(void)
1948 return saa7134_ts_register(&dvb_ops);
1951 static void __exit dvb_unregister(void)
1953 saa7134_ts_unregister(&dvb_ops);
1956 module_init(dvb_register);
1957 module_exit(dvb_unregister);
1959 /* ------------------------------------------------------------------ */