2 DVB device driver for em28xx
4 (c) 2008-2011 Mauro Carvalho Chehab <mchehab@infradead.org>
6 (c) 2008 Devin Heitmueller <devin.heitmueller@gmail.com>
7 - Fixes for the driver to properly work with HVR-950
8 - Fixes for the driver to properly work with Pinnacle PCTV HD Pro Stick
9 - Fixes for the driver to properly work with AMD ATI TV Wonder HD 600
11 (c) 2008 Aidan Thornton <makosoft@googlemail.com>
13 Based on cx88-dvb, saa7134-dvb and videobuf-dvb originally written by:
14 (c) 2004, 2005 Chris Pascoe <c.pascoe@itee.uq.edu.au>
15 (c) 2004 Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]
17 This program is free software; you can redistribute it and/or modify
18 it under the terms of the GNU General Public License as published by
19 the Free Software Foundation; either version 2 of the License.
22 #include <linux/kernel.h>
23 #include <linux/slab.h>
24 #include <linux/usb.h>
27 #include <media/v4l2-common.h>
28 #include <media/videobuf-vmalloc.h>
29 #include <media/tuner.h>
30 #include "tuner-simple.h"
31 #include <linux/gpio.h>
38 #include "mt352_priv.h" /* FIXME */
44 #include "tda18271c2dd.h"
50 MODULE_DESCRIPTION("driver for em28xx based DVB cards");
51 MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@infradead.org>");
52 MODULE_LICENSE("GPL");
54 static unsigned int debug;
55 module_param(debug, int, 0644);
56 MODULE_PARM_DESC(debug, "enable debug messages [dvb]");
58 DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
60 #define dprintk(level, fmt, arg...) do { \
62 printk(KERN_DEBUG "%s/2-dvb: " fmt, dev->name, ## arg); \
66 struct dvb_frontend *fe[2];
68 /* feed count management */
72 /* general boilerplate stuff */
73 struct dvb_adapter adapter;
74 struct dvb_demux demux;
76 struct dmx_frontend fe_hw;
77 struct dmx_frontend fe_mem;
80 /* Due to DRX-K - probably need changes */
81 int (*gate_ctrl)(struct dvb_frontend *, int);
82 struct semaphore pll_mutex;
88 static inline void print_err_status(struct em28xx *dev,
89 int packet, int status)
91 char *errmsg = "Unknown";
95 errmsg = "unlinked synchronuously";
98 errmsg = "unlinked asynchronuously";
101 errmsg = "Buffer error (overrun)";
104 errmsg = "Stalled (device not responding)";
107 errmsg = "Babble (bad cable?)";
110 errmsg = "Bit-stuff error (bad cable?)";
113 errmsg = "CRC/Timeout (could be anything)";
116 errmsg = "Device does not respond";
120 dprintk(1, "URB status %d [%s].\n", status, errmsg);
122 dprintk(1, "URB packet %d, status %d [%s].\n",
123 packet, status, errmsg);
127 static inline int em28xx_dvb_isoc_copy(struct em28xx *dev, struct urb *urb)
134 if ((dev->state & DEV_DISCONNECTED) || (dev->state & DEV_MISCONFIGURED))
137 if (urb->status < 0) {
138 print_err_status(dev, -1, urb->status);
139 if (urb->status == -ENOENT)
143 for (i = 0; i < urb->number_of_packets; i++) {
144 int status = urb->iso_frame_desc[i].status;
147 print_err_status(dev, i, status);
148 if (urb->iso_frame_desc[i].status != -EPROTO)
152 dvb_dmx_swfilter(&dev->dvb->demux, urb->transfer_buffer +
153 urb->iso_frame_desc[i].offset,
154 urb->iso_frame_desc[i].actual_length);
160 static int em28xx_start_streaming(struct em28xx_dvb *dvb)
163 struct em28xx *dev = dvb->adapter.priv;
164 int max_dvb_packet_size;
166 usb_set_interface(dev->udev, 0, dev->dvb_alt);
167 rc = em28xx_set_mode(dev, EM28XX_DIGITAL_MODE);
171 max_dvb_packet_size = dev->dvb_max_pkt_size;
172 if (max_dvb_packet_size < 0)
173 return max_dvb_packet_size;
174 dprintk(1, "Using %d buffers each with %d x %d bytes\n",
176 EM28XX_DVB_MAX_PACKETS,
177 max_dvb_packet_size);
179 return em28xx_init_isoc(dev, EM28XX_DIGITAL_MODE,
180 EM28XX_DVB_MAX_PACKETS, EM28XX_DVB_NUM_BUFS,
181 max_dvb_packet_size, em28xx_dvb_isoc_copy);
184 static int em28xx_stop_streaming(struct em28xx_dvb *dvb)
186 struct em28xx *dev = dvb->adapter.priv;
188 em28xx_stop_urbs(dev);
190 em28xx_set_mode(dev, EM28XX_SUSPEND);
195 static int em28xx_start_feed(struct dvb_demux_feed *feed)
197 struct dvb_demux *demux = feed->demux;
198 struct em28xx_dvb *dvb = demux->priv;
201 if (!demux->dmx.frontend)
204 mutex_lock(&dvb->lock);
208 if (dvb->nfeeds == 1) {
209 ret = em28xx_start_streaming(dvb);
214 mutex_unlock(&dvb->lock);
218 static int em28xx_stop_feed(struct dvb_demux_feed *feed)
220 struct dvb_demux *demux = feed->demux;
221 struct em28xx_dvb *dvb = demux->priv;
224 mutex_lock(&dvb->lock);
227 if (0 == dvb->nfeeds)
228 err = em28xx_stop_streaming(dvb);
230 mutex_unlock(&dvb->lock);
236 /* ------------------------------------------------------------------ */
237 static int em28xx_dvb_bus_ctrl(struct dvb_frontend *fe, int acquire)
239 struct em28xx *dev = fe->dvb->priv;
242 return em28xx_set_mode(dev, EM28XX_DIGITAL_MODE);
244 return em28xx_set_mode(dev, EM28XX_SUSPEND);
247 /* ------------------------------------------------------------------ */
249 static struct lgdt330x_config em2880_lgdt3303_dev = {
250 .demod_address = 0x0e,
251 .demod_chip = LGDT3303,
254 static struct lgdt3305_config em2870_lgdt3304_dev = {
256 .demod_chip = LGDT3304,
257 .spectral_inversion = 1,
259 .mpeg_mode = LGDT3305_MPEG_PARALLEL,
260 .tpclk_edge = LGDT3305_TPCLK_FALLING_EDGE,
261 .tpvalid_polarity = LGDT3305_TP_VALID_HIGH,
266 static struct s921_config sharp_isdbt = {
267 .demod_address = 0x30 >> 1
270 static struct zl10353_config em28xx_zl10353_with_xc3028 = {
271 .demod_address = (0x1e >> 1),
277 static struct s5h1409_config em28xx_s5h1409_with_xc3028 = {
278 .demod_address = 0x32 >> 1,
279 .output_mode = S5H1409_PARALLEL_OUTPUT,
280 .gpio = S5H1409_GPIO_OFF,
281 .inversion = S5H1409_INVERSION_OFF,
282 .status_mode = S5H1409_DEMODLOCKING,
283 .mpeg_timing = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK
286 static struct tda18271_std_map kworld_a340_std_map = {
287 .atsc_6 = { .if_freq = 3250, .agc_mode = 3, .std = 0,
288 .if_lvl = 1, .rfagc_top = 0x37, },
289 .qam_6 = { .if_freq = 4000, .agc_mode = 3, .std = 1,
290 .if_lvl = 1, .rfagc_top = 0x37, },
293 static struct tda18271_config kworld_a340_config = {
294 .std_map = &kworld_a340_std_map,
297 static struct zl10353_config em28xx_zl10353_xc3028_no_i2c_gate = {
298 .demod_address = (0x1e >> 1),
300 .disable_i2c_gate_ctrl = 1,
305 static struct drxd_config em28xx_drxd = {
306 .demod_address = 0x70,
307 .demod_revision = 0xa2,
308 .pll_type = DRXD_PLL_NONE,
312 .disable_i2c_gate_ctrl = 1,
315 static struct drxk_config terratec_h5_drxk = {
319 .microcode_name = "dvb-usb-terratec-h5-drxk.fw",
320 .qam_demod_parameter_count = 2,
321 .load_firmware_sync = true,
324 static struct drxk_config hauppauge_930c_drxk = {
328 .microcode_name = "dvb-usb-hauppauge-hvr930c-drxk.fw",
330 .qam_demod_parameter_count = 2,
331 .load_firmware_sync = true,
334 static struct drxk_config terratec_htc_stick_drxk = {
338 .microcode_name = "dvb-usb-terratec-htc-stick-drxk.fw",
340 .qam_demod_parameter_count = 2,
341 /* Required for the antenna_gpio to disable LNA. */
342 .antenna_dvbt = true,
343 /* The windows driver uses the same. This will disable LNA. */
345 .load_firmware_sync = true,
348 static struct drxk_config maxmedia_ub425_tc_drxk = {
352 .load_firmware_sync = true,
355 static struct drxk_config pctv_520e_drxk = {
358 .microcode_name = "dvb-demod-drxk-pctv.fw",
359 .qam_demod_parameter_count = 2,
361 .antenna_dvbt = true, /* disable LNA */
362 .antenna_gpio = (1 << 2), /* disable LNA */
363 .load_firmware_sync = true,
366 static int drxk_gate_ctrl(struct dvb_frontend *fe, int enable)
368 struct em28xx_dvb *dvb = fe->sec_priv;
375 down(&dvb->pll_mutex);
376 status = dvb->gate_ctrl(fe, 1);
378 status = dvb->gate_ctrl(fe, 0);
384 static void hauppauge_hvr930c_init(struct em28xx *dev)
388 struct em28xx_reg_seq hauppauge_hvr930c_init[] = {
389 {EM2874_R80_GPIO, 0xff, 0xff, 0x65},
390 {EM2874_R80_GPIO, 0xfb, 0xff, 0x32},
391 {EM2874_R80_GPIO, 0xff, 0xff, 0xb8},
394 struct em28xx_reg_seq hauppauge_hvr930c_end[] = {
395 {EM2874_R80_GPIO, 0xef, 0xff, 0x01},
396 {EM2874_R80_GPIO, 0xaf, 0xff, 0x65},
397 {EM2874_R80_GPIO, 0xef, 0xff, 0x76},
398 {EM2874_R80_GPIO, 0xef, 0xff, 0x01},
399 {EM2874_R80_GPIO, 0xcf, 0xff, 0x0b},
400 {EM2874_R80_GPIO, 0xef, 0xff, 0x40},
402 {EM2874_R80_GPIO, 0xcf, 0xff, 0x65},
403 {EM2874_R80_GPIO, 0xef, 0xff, 0x65},
404 {EM2874_R80_GPIO, 0xcf, 0xff, 0x0b},
405 {EM2874_R80_GPIO, 0xef, 0xff, 0x65},
414 {{ 0x06, 0x02, 0x00, 0x31 }, 4},
416 {{ 0x01, 0x02, 0x00, 0xc6 }, 4},
418 {{ 0x01, 0x00, 0xff, 0xaf }, 4},
419 {{ 0x01, 0x00, 0x03, 0xa0 }, 4},
421 {{ 0x01, 0x00, 0x73, 0xaf }, 4},
424 {{ 0x00, 0x04, 0x00, 0x0a }, 4},
426 {{ 0x04, 0x14, 0x00, 0x00 }, 4},
429 em28xx_gpio_set(dev, hauppauge_hvr930c_init);
430 em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, 0x40);
432 em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, 0x44);
435 dev->i2c_client.addr = 0x82 >> 1;
437 for (i = 0; i < ARRAY_SIZE(regs); i++)
438 i2c_master_send(&dev->i2c_client, regs[i].r, regs[i].len);
439 em28xx_gpio_set(dev, hauppauge_hvr930c_end);
443 em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, 0x44);
446 em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, 0x45);
451 static void terratec_h5_init(struct em28xx *dev)
454 struct em28xx_reg_seq terratec_h5_init[] = {
455 {EM28XX_R08_GPIO, 0xff, 0xff, 10},
456 {EM2874_R80_GPIO, 0xf6, 0xff, 100},
457 {EM2874_R80_GPIO, 0xf2, 0xff, 50},
458 {EM2874_R80_GPIO, 0xf6, 0xff, 100},
461 struct em28xx_reg_seq terratec_h5_end[] = {
462 {EM2874_R80_GPIO, 0xe6, 0xff, 100},
463 {EM2874_R80_GPIO, 0xa6, 0xff, 50},
464 {EM2874_R80_GPIO, 0xe6, 0xff, 100},
471 {{ 0x06, 0x02, 0x00, 0x31 }, 4},
473 {{ 0x01, 0x02, 0x00, 0xc6 }, 4},
475 {{ 0x01, 0x00, 0xff, 0xaf }, 4},
476 {{ 0x01, 0x00, 0x03, 0xa0 }, 4},
478 {{ 0x01, 0x00, 0x73, 0xaf }, 4},
481 {{ 0x00, 0x04, 0x00, 0x0a }, 4},
483 {{ 0x04, 0x14, 0x00, 0x00 }, 4},
486 em28xx_gpio_set(dev, terratec_h5_init);
487 em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, 0x40);
489 em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, 0x45);
492 dev->i2c_client.addr = 0x82 >> 1;
494 for (i = 0; i < ARRAY_SIZE(regs); i++)
495 i2c_master_send(&dev->i2c_client, regs[i].r, regs[i].len);
496 em28xx_gpio_set(dev, terratec_h5_end);
499 static void terratec_htc_stick_init(struct em28xx *dev)
504 * GPIO configuration:
505 * 0xff: unknown (does not affect DVB-T).
506 * 0xf6: DRX-K (demodulator).
507 * 0xe6: unknown (does not affect DVB-T).
508 * 0xb6: unknown (does not affect DVB-T).
510 struct em28xx_reg_seq terratec_htc_stick_init[] = {
511 {EM28XX_R08_GPIO, 0xff, 0xff, 10},
512 {EM2874_R80_GPIO, 0xf6, 0xff, 100},
513 {EM2874_R80_GPIO, 0xe6, 0xff, 50},
514 {EM2874_R80_GPIO, 0xf6, 0xff, 100},
517 struct em28xx_reg_seq terratec_htc_stick_end[] = {
518 {EM2874_R80_GPIO, 0xb6, 0xff, 100},
519 {EM2874_R80_GPIO, 0xf6, 0xff, 50},
524 * Init the analog decoder (not yet supported), but
525 * it's probably still a good idea.
531 {{ 0x06, 0x02, 0x00, 0x31 }, 4},
533 {{ 0x01, 0x02, 0x00, 0xc6 }, 4},
535 {{ 0x01, 0x00, 0xff, 0xaf }, 4},
538 em28xx_gpio_set(dev, terratec_htc_stick_init);
540 em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, 0x40);
542 em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, 0x44);
545 dev->i2c_client.addr = 0x82 >> 1;
547 for (i = 0; i < ARRAY_SIZE(regs); i++)
548 i2c_master_send(&dev->i2c_client, regs[i].r, regs[i].len);
550 em28xx_gpio_set(dev, terratec_htc_stick_end);
553 static void terratec_htc_usb_xs_init(struct em28xx *dev)
557 struct em28xx_reg_seq terratec_htc_usb_xs_init[] = {
558 {EM28XX_R08_GPIO, 0xff, 0xff, 10},
559 {EM2874_R80_GPIO, 0xb2, 0xff, 100},
560 {EM2874_R80_GPIO, 0xb2, 0xff, 50},
561 {EM2874_R80_GPIO, 0xb6, 0xff, 100},
564 struct em28xx_reg_seq terratec_htc_usb_xs_end[] = {
565 {EM2874_R80_GPIO, 0xa6, 0xff, 100},
566 {EM2874_R80_GPIO, 0xa6, 0xff, 50},
567 {EM2874_R80_GPIO, 0xe6, 0xff, 100},
572 * Init the analog decoder (not yet supported), but
573 * it's probably still a good idea.
579 {{ 0x06, 0x02, 0x00, 0x31 }, 4},
581 {{ 0x01, 0x02, 0x00, 0xc6 }, 4},
583 {{ 0x01, 0x00, 0xff, 0xaf }, 4},
584 {{ 0x01, 0x00, 0x03, 0xa0 }, 4},
586 {{ 0x01, 0x00, 0x73, 0xaf }, 4},
589 {{ 0x00, 0x04, 0x00, 0x0a }, 4},
591 {{ 0x04, 0x14, 0x00, 0x00 }, 4},
594 em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, 0x40);
596 em28xx_gpio_set(dev, terratec_htc_usb_xs_init);
598 em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, 0x40);
600 em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, 0x44);
603 dev->i2c_client.addr = 0x82 >> 1;
605 for (i = 0; i < ARRAY_SIZE(regs); i++)
606 i2c_master_send(&dev->i2c_client, regs[i].r, regs[i].len);
608 em28xx_gpio_set(dev, terratec_htc_usb_xs_end);
611 static void pctv_520e_init(struct em28xx *dev)
614 * Init AVF4910B analog decoder. Looks like I2C traffic to
615 * digital demodulator and tuner are routed via AVF4910B.
622 {{ 0x06, 0x02, 0x00, 0x31 }, 4},
624 {{ 0x01, 0x02, 0x00, 0xc6 }, 4},
626 {{ 0x01, 0x00, 0xff, 0xaf }, 4},
627 {{ 0x01, 0x00, 0x03, 0xa0 }, 4},
629 {{ 0x01, 0x00, 0x73, 0xaf }, 4},
632 dev->i2c_client.addr = 0x82 >> 1; /* 0x41 */
634 for (i = 0; i < ARRAY_SIZE(regs); i++)
635 i2c_master_send(&dev->i2c_client, regs[i].r, regs[i].len);
638 static int em28xx_pctv_290e_set_lna(struct dvb_frontend *fe)
640 struct dtv_frontend_properties *c = &fe->dtv_property_cache;
641 struct em28xx *dev = fe->dvb->priv;
642 #ifdef CONFIG_GPIOLIB
643 struct em28xx_dvb *dvb = dev->dvb;
648 flags = GPIOF_OUT_INIT_HIGH; /* enable LNA */
650 flags = GPIOF_OUT_INIT_LOW; /* disable LNA */
652 ret = gpio_request_one(dvb->lna_gpio, flags, NULL);
654 em28xx_errdev("gpio request failed %d\n", ret);
656 gpio_free(dvb->lna_gpio);
660 dev_warn(&dev->udev->dev, "%s: LNA control is disabled (lna=%u)\n",
661 KBUILD_MODNAME, c->lna);
666 static int em28xx_mt352_terratec_xs_init(struct dvb_frontend *fe)
668 /* Values extracted from a USB trace of the Terratec Windows driver */
669 static u8 clock_config[] = { CLOCK_CTL, 0x38, 0x2c };
670 static u8 reset[] = { RESET, 0x80 };
671 static u8 adc_ctl_1_cfg[] = { ADC_CTL_1, 0x40 };
672 static u8 agc_cfg[] = { AGC_TARGET, 0x28, 0xa0 };
673 static u8 input_freq_cfg[] = { INPUT_FREQ_1, 0x31, 0xb8 };
674 static u8 rs_err_cfg[] = { RS_ERR_PER_1, 0x00, 0x4d };
675 static u8 capt_range_cfg[] = { CAPT_RANGE, 0x32 };
676 static u8 trl_nom_cfg[] = { TRL_NOMINAL_RATE_1, 0x64, 0x00 };
677 static u8 tps_given_cfg[] = { TPS_GIVEN_1, 0x40, 0x80, 0x50 };
678 static u8 tuner_go[] = { TUNER_GO, 0x01};
680 mt352_write(fe, clock_config, sizeof(clock_config));
682 mt352_write(fe, reset, sizeof(reset));
683 mt352_write(fe, adc_ctl_1_cfg, sizeof(adc_ctl_1_cfg));
684 mt352_write(fe, agc_cfg, sizeof(agc_cfg));
685 mt352_write(fe, input_freq_cfg, sizeof(input_freq_cfg));
686 mt352_write(fe, rs_err_cfg, sizeof(rs_err_cfg));
687 mt352_write(fe, capt_range_cfg, sizeof(capt_range_cfg));
688 mt352_write(fe, trl_nom_cfg, sizeof(trl_nom_cfg));
689 mt352_write(fe, tps_given_cfg, sizeof(tps_given_cfg));
690 mt352_write(fe, tuner_go, sizeof(tuner_go));
694 static struct mt352_config terratec_xs_mt352_cfg = {
695 .demod_address = (0x1e >> 1),
698 .demod_init = em28xx_mt352_terratec_xs_init,
701 static struct tda10023_config em28xx_tda10023_config = {
702 .demod_address = 0x0c,
706 static struct cxd2820r_config em28xx_cxd2820r_config = {
707 .i2c_address = (0xd8 >> 1),
708 .ts_mode = CXD2820R_TS_SERIAL,
711 static struct tda18271_config em28xx_cxd2820r_tda18271_config = {
712 .output_opt = TDA18271_OUTPUT_LT_OFF,
713 .gate = TDA18271_GATE_DIGITAL,
716 static const struct tda10071_config em28xx_tda10071_config = {
717 .i2c_address = 0x55, /* (0xaa >> 1) */
719 .ts_mode = TDA10071_TS_SERIAL,
721 .xtal = 40444000, /* 40.444 MHz */
722 .pll_multiplier = 20,
725 static const struct a8293_config em28xx_a8293_config = {
726 .i2c_addr = 0x08, /* (0x10 >> 1) */
729 static struct zl10353_config em28xx_zl10353_no_i2c_gate_dev = {
730 .demod_address = (0x1e >> 1),
731 .disable_i2c_gate_ctrl = 1,
735 static struct qt1010_config em28xx_qt1010_config = {
740 /* ------------------------------------------------------------------ */
742 static int em28xx_attach_xc3028(u8 addr, struct em28xx *dev)
744 struct dvb_frontend *fe;
745 struct xc2028_config cfg;
747 memset(&cfg, 0, sizeof(cfg));
748 cfg.i2c_adap = &dev->i2c_adap;
751 if (!dev->dvb->fe[0]) {
752 em28xx_errdev("/2: dvb frontend not attached. "
753 "Can't attach xc3028\n");
757 fe = dvb_attach(xc2028_attach, dev->dvb->fe[0], &cfg);
759 em28xx_errdev("/2: xc3028 attach failed\n");
760 dvb_frontend_detach(dev->dvb->fe[0]);
761 dev->dvb->fe[0] = NULL;
765 em28xx_info("%s/2: xc3028 attached\n", dev->name);
770 /* ------------------------------------------------------------------ */
772 static int em28xx_register_dvb(struct em28xx_dvb *dvb, struct module *module,
773 struct em28xx *dev, struct device *device)
777 mutex_init(&dvb->lock);
779 /* register adapter */
780 result = dvb_register_adapter(&dvb->adapter, dev->name, module, device,
783 printk(KERN_WARNING "%s: dvb_register_adapter failed (errno = %d)\n",
788 /* Ensure all frontends negotiate bus access */
789 dvb->fe[0]->ops.ts_bus_ctrl = em28xx_dvb_bus_ctrl;
791 dvb->fe[1]->ops.ts_bus_ctrl = em28xx_dvb_bus_ctrl;
793 dvb->adapter.priv = dev;
795 /* register frontend */
796 result = dvb_register_frontend(&dvb->adapter, dvb->fe[0]);
798 printk(KERN_WARNING "%s: dvb_register_frontend failed (errno = %d)\n",
803 /* register 2nd frontend */
805 result = dvb_register_frontend(&dvb->adapter, dvb->fe[1]);
807 printk(KERN_WARNING "%s: 2nd dvb_register_frontend failed (errno = %d)\n",
813 /* register demux stuff */
814 dvb->demux.dmx.capabilities =
815 DMX_TS_FILTERING | DMX_SECTION_FILTERING |
816 DMX_MEMORY_BASED_FILTERING;
817 dvb->demux.priv = dvb;
818 dvb->demux.filternum = 256;
819 dvb->demux.feednum = 256;
820 dvb->demux.start_feed = em28xx_start_feed;
821 dvb->demux.stop_feed = em28xx_stop_feed;
823 result = dvb_dmx_init(&dvb->demux);
825 printk(KERN_WARNING "%s: dvb_dmx_init failed (errno = %d)\n",
830 dvb->dmxdev.filternum = 256;
831 dvb->dmxdev.demux = &dvb->demux.dmx;
832 dvb->dmxdev.capabilities = 0;
833 result = dvb_dmxdev_init(&dvb->dmxdev, &dvb->adapter);
835 printk(KERN_WARNING "%s: dvb_dmxdev_init failed (errno = %d)\n",
840 dvb->fe_hw.source = DMX_FRONTEND_0;
841 result = dvb->demux.dmx.add_frontend(&dvb->demux.dmx, &dvb->fe_hw);
843 printk(KERN_WARNING "%s: add_frontend failed (DMX_FRONTEND_0, errno = %d)\n",
848 dvb->fe_mem.source = DMX_MEMORY_FE;
849 result = dvb->demux.dmx.add_frontend(&dvb->demux.dmx, &dvb->fe_mem);
851 printk(KERN_WARNING "%s: add_frontend failed (DMX_MEMORY_FE, errno = %d)\n",
856 result = dvb->demux.dmx.connect_frontend(&dvb->demux.dmx, &dvb->fe_hw);
858 printk(KERN_WARNING "%s: connect_frontend failed (errno = %d)\n",
863 /* register network adapter */
864 dvb_net_init(&dvb->adapter, &dvb->net, &dvb->demux.dmx);
868 dvb->demux.dmx.remove_frontend(&dvb->demux.dmx, &dvb->fe_mem);
870 dvb->demux.dmx.remove_frontend(&dvb->demux.dmx, &dvb->fe_hw);
872 dvb_dmxdev_release(&dvb->dmxdev);
874 dvb_dmx_release(&dvb->demux);
877 dvb_unregister_frontend(dvb->fe[1]);
878 dvb_unregister_frontend(dvb->fe[0]);
881 dvb_frontend_detach(dvb->fe[1]);
883 dvb_frontend_detach(dvb->fe[0]);
884 dvb_unregister_adapter(&dvb->adapter);
889 static void em28xx_unregister_dvb(struct em28xx_dvb *dvb)
891 dvb_net_release(&dvb->net);
892 dvb->demux.dmx.remove_frontend(&dvb->demux.dmx, &dvb->fe_mem);
893 dvb->demux.dmx.remove_frontend(&dvb->demux.dmx, &dvb->fe_hw);
894 dvb_dmxdev_release(&dvb->dmxdev);
895 dvb_dmx_release(&dvb->demux);
897 dvb_unregister_frontend(dvb->fe[1]);
898 dvb_unregister_frontend(dvb->fe[0]);
899 if (dvb->fe[1] && !dvb->dont_attach_fe1)
900 dvb_frontend_detach(dvb->fe[1]);
901 dvb_frontend_detach(dvb->fe[0]);
902 dvb_unregister_adapter(&dvb->adapter);
905 static int em28xx_dvb_init(struct em28xx *dev)
907 int result = 0, mfe_shared = 0;
908 struct em28xx_dvb *dvb;
910 if (!dev->board.has_dvb) {
911 /* This device does not support the extension */
912 printk(KERN_INFO "em28xx_dvb: This device does not support the extension\n");
916 dvb = kzalloc(sizeof(struct em28xx_dvb), GFP_KERNEL);
919 em28xx_info("em28xx_dvb: memory allocation failed\n");
923 dvb->fe[0] = dvb->fe[1] = NULL;
925 mutex_lock(&dev->lock);
926 em28xx_set_mode(dev, EM28XX_DIGITAL_MODE);
928 switch (dev->model) {
929 case EM2874_BOARD_LEADERSHIP_ISDBT:
930 dvb->fe[0] = dvb_attach(s921_attach,
931 &sharp_isdbt, &dev->i2c_adap);
939 case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850:
940 case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950:
941 case EM2880_BOARD_PINNACLE_PCTV_HD_PRO:
942 case EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600:
943 dvb->fe[0] = dvb_attach(lgdt330x_attach,
944 &em2880_lgdt3303_dev,
946 if (em28xx_attach_xc3028(0x61, dev) < 0) {
951 case EM2880_BOARD_KWORLD_DVB_310U:
952 dvb->fe[0] = dvb_attach(zl10353_attach,
953 &em28xx_zl10353_with_xc3028,
955 if (em28xx_attach_xc3028(0x61, dev) < 0) {
960 case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900:
961 case EM2882_BOARD_TERRATEC_HYBRID_XS:
962 case EM2880_BOARD_EMPIRE_DUAL_TV:
963 dvb->fe[0] = dvb_attach(zl10353_attach,
964 &em28xx_zl10353_xc3028_no_i2c_gate,
966 if (em28xx_attach_xc3028(0x61, dev) < 0) {
971 case EM2880_BOARD_TERRATEC_HYBRID_XS:
972 case EM2880_BOARD_TERRATEC_HYBRID_XS_FR:
973 case EM2881_BOARD_PINNACLE_HYBRID_PRO:
974 case EM2882_BOARD_DIKOM_DK300:
975 case EM2882_BOARD_KWORLD_VS_DVBT:
976 dvb->fe[0] = dvb_attach(zl10353_attach,
977 &em28xx_zl10353_xc3028_no_i2c_gate,
979 if (dvb->fe[0] == NULL) {
980 /* This board could have either a zl10353 or a mt352.
981 If the chip id isn't for zl10353, try mt352 */
982 dvb->fe[0] = dvb_attach(mt352_attach,
983 &terratec_xs_mt352_cfg,
987 if (em28xx_attach_xc3028(0x61, dev) < 0) {
992 case EM2870_BOARD_KWORLD_355U:
993 dvb->fe[0] = dvb_attach(zl10353_attach,
994 &em28xx_zl10353_no_i2c_gate_dev,
996 if (dvb->fe[0] != NULL)
997 dvb_attach(qt1010_attach, dvb->fe[0],
998 &dev->i2c_adap, &em28xx_qt1010_config);
1000 case EM2883_BOARD_KWORLD_HYBRID_330U:
1001 case EM2882_BOARD_EVGA_INDTUBE:
1002 dvb->fe[0] = dvb_attach(s5h1409_attach,
1003 &em28xx_s5h1409_with_xc3028,
1005 if (em28xx_attach_xc3028(0x61, dev) < 0) {
1010 case EM2882_BOARD_KWORLD_ATSC_315U:
1011 dvb->fe[0] = dvb_attach(lgdt330x_attach,
1012 &em2880_lgdt3303_dev,
1014 if (dvb->fe[0] != NULL) {
1015 if (!dvb_attach(simple_tuner_attach, dvb->fe[0],
1016 &dev->i2c_adap, 0x61, TUNER_THOMSON_DTT761X)) {
1022 case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2:
1023 case EM2882_BOARD_PINNACLE_HYBRID_PRO_330E:
1024 dvb->fe[0] = dvb_attach(drxd_attach, &em28xx_drxd, NULL,
1025 &dev->i2c_adap, &dev->udev->dev);
1026 if (em28xx_attach_xc3028(0x61, dev) < 0) {
1031 case EM2870_BOARD_REDDO_DVB_C_USB_BOX:
1032 /* Philips CU1216L NIM (Philips TDA10023 + Infineon TUA6034) */
1033 dvb->fe[0] = dvb_attach(tda10023_attach,
1034 &em28xx_tda10023_config,
1035 &dev->i2c_adap, 0x48);
1037 if (!dvb_attach(simple_tuner_attach, dvb->fe[0],
1038 &dev->i2c_adap, 0x60, TUNER_PHILIPS_CU1216L)) {
1044 case EM2870_BOARD_KWORLD_A340:
1045 dvb->fe[0] = dvb_attach(lgdt3305_attach,
1046 &em2870_lgdt3304_dev,
1048 if (dvb->fe[0] != NULL)
1049 dvb_attach(tda18271_attach, dvb->fe[0], 0x60,
1050 &dev->i2c_adap, &kworld_a340_config);
1052 case EM28174_BOARD_PCTV_290E:
1053 /* set default GPIO0 for LNA, used if GPIOLIB is undefined */
1054 dvb->lna_gpio = CXD2820R_GPIO_E | CXD2820R_GPIO_O |
1056 dvb->fe[0] = dvb_attach(cxd2820r_attach,
1057 &em28xx_cxd2820r_config,
1061 /* FE 0 attach tuner */
1062 if (!dvb_attach(tda18271_attach,
1066 &em28xx_cxd2820r_tda18271_config)) {
1068 dvb_frontend_detach(dvb->fe[0]);
1073 #ifdef CONFIG_GPIOLIB
1074 /* enable LNA for DVB-T, DVB-T2 and DVB-C */
1075 result = gpio_request_one(dvb->lna_gpio,
1076 GPIOF_OUT_INIT_LOW, NULL);
1078 em28xx_errdev("gpio request failed %d\n",
1081 gpio_free(dvb->lna_gpio);
1083 result = 0; /* continue even set LNA fails */
1085 dvb->fe[0]->ops.set_lna = em28xx_pctv_290e_set_lna;
1089 case EM2884_BOARD_HAUPPAUGE_WINTV_HVR_930C:
1091 struct xc5000_config cfg;
1092 hauppauge_hvr930c_init(dev);
1094 dvb->fe[0] = dvb_attach(drxk_attach,
1095 &hauppauge_930c_drxk, &dev->i2c_adap);
1100 /* FIXME: do we need a pll semaphore? */
1101 dvb->fe[0]->sec_priv = dvb;
1102 sema_init(&dvb->pll_mutex, 1);
1103 dvb->gate_ctrl = dvb->fe[0]->ops.i2c_gate_ctrl;
1104 dvb->fe[0]->ops.i2c_gate_ctrl = drxk_gate_ctrl;
1107 memset(&cfg, 0, sizeof(cfg));
1108 cfg.i2c_address = 0x61;
1111 if (dvb->fe[0]->ops.i2c_gate_ctrl)
1112 dvb->fe[0]->ops.i2c_gate_ctrl(dvb->fe[0], 1);
1113 if (!dvb_attach(xc5000_attach, dvb->fe[0], &dev->i2c_adap,
1118 if (dvb->fe[0]->ops.i2c_gate_ctrl)
1119 dvb->fe[0]->ops.i2c_gate_ctrl(dvb->fe[0], 0);
1123 case EM2884_BOARD_TERRATEC_H5:
1124 terratec_h5_init(dev);
1126 dvb->fe[0] = dvb_attach(drxk_attach, &terratec_h5_drxk, &dev->i2c_adap);
1131 /* FIXME: do we need a pll semaphore? */
1132 dvb->fe[0]->sec_priv = dvb;
1133 sema_init(&dvb->pll_mutex, 1);
1134 dvb->gate_ctrl = dvb->fe[0]->ops.i2c_gate_ctrl;
1135 dvb->fe[0]->ops.i2c_gate_ctrl = drxk_gate_ctrl;
1137 /* Attach tda18271 to DVB-C frontend */
1138 if (dvb->fe[0]->ops.i2c_gate_ctrl)
1139 dvb->fe[0]->ops.i2c_gate_ctrl(dvb->fe[0], 1);
1140 if (!dvb_attach(tda18271c2dd_attach, dvb->fe[0], &dev->i2c_adap, 0x60)) {
1144 if (dvb->fe[0]->ops.i2c_gate_ctrl)
1145 dvb->fe[0]->ops.i2c_gate_ctrl(dvb->fe[0], 0);
1148 case EM28174_BOARD_PCTV_460E:
1150 dvb->fe[0] = dvb_attach(tda10071_attach,
1151 &em28xx_tda10071_config, &dev->i2c_adap);
1155 dvb_attach(a8293_attach, dvb->fe[0], &dev->i2c_adap,
1156 &em28xx_a8293_config);
1158 case EM2874_BOARD_MAXMEDIA_UB425_TC:
1159 /* attach demodulator */
1160 dvb->fe[0] = dvb_attach(drxk_attach, &maxmedia_ub425_tc_drxk,
1164 /* disable I2C-gate */
1165 dvb->fe[0]->ops.i2c_gate_ctrl = NULL;
1168 if (!dvb_attach(tda18271c2dd_attach, dvb->fe[0],
1169 &dev->i2c_adap, 0x60)) {
1170 dvb_frontend_detach(dvb->fe[0]);
1176 /* TODO: we need drx-3913k firmware in order to support DVB-T */
1177 em28xx_info("MaxMedia UB425-TC: only DVB-C supported by that " \
1178 "driver version\n");
1181 case EM2884_BOARD_PCTV_510E:
1182 case EM2884_BOARD_PCTV_520E:
1183 pctv_520e_init(dev);
1185 /* attach demodulator */
1186 dvb->fe[0] = dvb_attach(drxk_attach, &pctv_520e_drxk,
1191 if (!dvb_attach(tda18271_attach, dvb->fe[0], 0x60,
1193 &em28xx_cxd2820r_tda18271_config)) {
1194 dvb_frontend_detach(dvb->fe[0]);
1200 case EM2884_BOARD_CINERGY_HTC_STICK:
1201 terratec_htc_stick_init(dev);
1203 /* attach demodulator */
1204 dvb->fe[0] = dvb_attach(drxk_attach, &terratec_htc_stick_drxk,
1211 /* Attach the demodulator. */
1212 if (!dvb_attach(tda18271_attach, dvb->fe[0], 0x60,
1214 &em28xx_cxd2820r_tda18271_config)) {
1219 case EM2884_BOARD_TERRATEC_HTC_USB_XS:
1220 terratec_htc_usb_xs_init(dev);
1222 /* attach demodulator */
1223 dvb->fe[0] = dvb_attach(drxk_attach, &terratec_htc_stick_drxk,
1230 /* Attach the demodulator. */
1231 if (!dvb_attach(tda18271_attach, dvb->fe[0], 0x60,
1233 &em28xx_cxd2820r_tda18271_config)) {
1239 em28xx_errdev("/2: The frontend of your DVB/ATSC card"
1240 " isn't supported yet\n");
1243 if (NULL == dvb->fe[0]) {
1244 em28xx_errdev("/2: frontend initialization failed\n");
1248 /* define general-purpose callback pointer */
1249 dvb->fe[0]->callback = em28xx_tuner_callback;
1251 dvb->fe[1]->callback = em28xx_tuner_callback;
1253 /* register everything */
1254 result = em28xx_register_dvb(dvb, THIS_MODULE, dev, &dev->udev->dev);
1260 dvb->adapter.mfe_shared = mfe_shared;
1262 em28xx_info("Successfully loaded em28xx-dvb\n");
1264 em28xx_set_mode(dev, EM28XX_SUSPEND);
1265 mutex_unlock(&dev->lock);
1274 static inline void prevent_sleep(struct dvb_frontend_ops *ops)
1276 ops->set_voltage = NULL;
1278 ops->tuner_ops.sleep = NULL;
1281 static int em28xx_dvb_fini(struct em28xx *dev)
1283 if (!dev->board.has_dvb) {
1284 /* This device does not support the extension */
1289 struct em28xx_dvb *dvb = dev->dvb;
1291 if (dev->state & DEV_DISCONNECTED) {
1292 /* We cannot tell the device to sleep
1293 * once it has been unplugged. */
1295 prevent_sleep(&dvb->fe[0]->ops);
1297 prevent_sleep(&dvb->fe[1]->ops);
1300 em28xx_unregister_dvb(dvb);
1308 static struct em28xx_ops dvb_ops = {
1310 .name = "Em28xx dvb Extension",
1311 .init = em28xx_dvb_init,
1312 .fini = em28xx_dvb_fini,
1315 static int __init em28xx_dvb_register(void)
1317 return em28xx_register_extension(&dvb_ops);
1320 static void __exit em28xx_dvb_unregister(void)
1322 em28xx_unregister_extension(&dvb_ops);
1325 module_init(em28xx_dvb_register);
1326 module_exit(em28xx_dvb_unregister);