2 # Generic video config states
7 depends on VIDEO_DEV && VIDEO_V4L2_COMMON
8 default VIDEO_DEV && VIDEO_V4L2_COMMON
13 config VIDEOBUF_DMA_SG
18 config VIDEOBUF_VMALLOC
22 config VIDEOBUF_DMA_CONTIG
41 depends on MEDIA_TUNER
43 config V4L2_MEM2MEM_DEV
45 depends on VIDEOBUF2_CORE
50 config VIDEOBUF2_MEMOPS
53 config VIDEOBUF2_DMA_CONTIG
55 select VIDEOBUF2_MEMOPS
58 config VIDEOBUF2_VMALLOC
60 select VIDEOBUF2_MEMOPS
64 config VIDEOBUF2_DMA_SG
67 select VIDEOBUF2_MEMOPS
70 # Multimedia Video device configuration
73 menuconfig VIDEO_CAPTURE_DRIVERS
74 bool "Video capture adapters"
78 Say Y here to enable selecting the video adapters for
79 webcams, analog TV, and hybrid analog/digital TV.
80 Some of those devices also supports FM radio.
82 if VIDEO_CAPTURE_DRIVERS && VIDEO_V4L2
84 config VIDEO_ADV_DEBUG
85 bool "Enable advanced debug functionality"
88 Say Y here to enable advanced debugging functionality on some
92 config VIDEO_FIXED_MINOR_RANGES
93 bool "Enable old-style fixed minor ranges for video devices"
96 Say Y here to enable the old-style fixed-range minor assignments.
97 Only useful if you rely on the old behavior and use mknod instead of udev.
101 config VIDEO_HELPER_CHIPS_AUTO
102 bool "Autoselect pertinent encoders/decoders and other helper chips"
105 Most video cards may require additional modules to encode or
106 decode audio/video standards. This option will autoselect
107 all pertinent modules to each selected video module.
109 Unselect this only if you know exactly what you are doing, since
110 it may break support on some boards.
115 tristate "I2C module for IR" if !VIDEO_HELPER_CHIPS_AUTO
116 depends on I2C && RC_CORE
119 Most boards have an IR chip directly connected via GPIO. However,
120 some video boards have the IR connected via I2C bus.
122 If your board doesn't have an I2C IR chip, you may disable this
128 # Encoder / Decoder module configuration
131 menu "Encoders, decoders, sensors and other helper chips"
132 visible if !VIDEO_HELPER_CHIPS_AUTO
134 comment "Audio decoders, processors and mixers"
137 tristate "Simple audio decoder chips"
138 depends on VIDEO_V4L2 && I2C
140 Support for several audio decoder chips found on some bt8xx boards:
141 Philips: tda9840, tda9873h, tda9874h/a, tda9850, tda985x, tea6300,
142 tea6320, tea6420, tda8425, ta8874z.
143 Microchip: pic16c54 based design on ProVideo PV951 board.
145 To compile this driver as a module, choose M here: the
146 module will be called tvaudio.
149 tristate "Philips TDA7432 audio processor"
150 depends on VIDEO_V4L2 && I2C
152 Support for tda7432 audio decoder chip found on some bt8xx boards.
154 To compile this driver as a module, choose M here: the
155 module will be called tda7432.
158 tristate "Philips TDA9840 audio processor"
161 Support for tda9840 audio decoder chip found on some Zoran boards.
163 To compile this driver as a module, choose M here: the
164 module will be called tda9840.
166 config VIDEO_TEA6415C
167 tristate "Philips TEA6415C audio processor"
170 Support for tea6415c audio decoder chip found on some bt8xx boards.
172 To compile this driver as a module, choose M here: the
173 module will be called tea6415c.
176 tristate "Philips TEA6420 audio processor"
179 Support for tea6420 audio decoder chip found on some bt8xx boards.
181 To compile this driver as a module, choose M here: the
182 module will be called tea6420.
185 tristate "Micronas MSP34xx audio decoders"
186 depends on VIDEO_V4L2 && I2C
188 Support for the Micronas MSP34xx series of audio decoders.
190 To compile this driver as a module, choose M here: the
191 module will be called msp3400.
194 tristate "Cirrus Logic CS5345 audio ADC"
195 depends on VIDEO_V4L2 && I2C
197 Support for the Cirrus Logic CS5345 24-bit, 192 kHz
198 stereo A/D converter.
200 To compile this driver as a module, choose M here: the
201 module will be called cs5345.
203 config VIDEO_CS53L32A
204 tristate "Cirrus Logic CS53L32A audio ADC"
205 depends on VIDEO_V4L2 && I2C
207 Support for the Cirrus Logic CS53L32A low voltage
208 stereo A/D converter.
210 To compile this driver as a module, choose M here: the
211 module will be called cs53l32a.
213 config VIDEO_TLV320AIC23B
214 tristate "Texas Instruments TLV320AIC23B audio codec"
215 depends on VIDEO_V4L2 && I2C && EXPERIMENTAL
217 Support for the Texas Instruments TLV320AIC23B audio codec.
219 To compile this driver as a module, choose M here: the
220 module will be called tlv320aic23b.
223 tristate "Wolfson Microelectronics WM8775 audio ADC with input mixer"
224 depends on VIDEO_V4L2 && I2C
226 Support for the Wolfson Microelectronics WM8775 high
227 performance stereo A/D Converter with a 4 channel input mixer.
229 To compile this driver as a module, choose M here: the
230 module will be called wm8775.
233 tristate "Wolfson Microelectronics WM8739 stereo audio ADC"
234 depends on VIDEO_V4L2 && I2C
236 Support for the Wolfson Microelectronics WM8739
237 stereo A/D Converter.
239 To compile this driver as a module, choose M here: the
240 module will be called wm8739.
242 config VIDEO_VP27SMPX
243 tristate "Panasonic VP27s internal MPX"
244 depends on VIDEO_V4L2 && I2C
246 Support for the internal MPX of the Panasonic VP27s tuner.
248 To compile this driver as a module, choose M here: the
249 module will be called vp27smpx.
251 comment "RDS decoders"
254 tristate "SAA6588 Radio Chip RDS decoder support"
255 depends on VIDEO_V4L2 && I2C
258 Support for this Radio Data System (RDS) decoder. This allows
259 seeing radio station identification transmitted using this
262 To compile this driver as a module, choose M here: the
263 module will be called saa6588.
265 comment "Video decoders"
268 tristate "Analog Devices ADV7180 decoder"
269 depends on VIDEO_V4L2 && I2C
271 Support for the Analog Devices ADV7180 video decoder.
273 To compile this driver as a module, choose M here: the
274 module will be called adv7180.
277 tristate "Analog Devices ADV7183 decoder"
278 depends on VIDEO_V4L2 && I2C
280 V4l2 subdevice driver for the Analog Devices
281 ADV7183 video decoder.
283 To compile this driver as a module, choose M here: the
284 module will be called adv7183.
287 tristate "BT819A VideoStream decoder"
288 depends on VIDEO_V4L2 && I2C
290 Support for BT819A video decoder.
292 To compile this driver as a module, choose M here: the
293 module will be called bt819.
296 tristate "BT856 VideoStream decoder"
297 depends on VIDEO_V4L2 && I2C
299 Support for BT856 video decoder.
301 To compile this driver as a module, choose M here: the
302 module will be called bt856.
305 tristate "BT866 VideoStream decoder"
306 depends on VIDEO_V4L2 && I2C
308 Support for BT866 video decoder.
310 To compile this driver as a module, choose M here: the
311 module will be called bt866.
314 tristate "KS0127 video decoder"
315 depends on VIDEO_V4L2 && I2C
317 Support for KS0127 video decoder.
319 This chip is used on AverMedia AVS6EYES Zoran-based MJPEG
322 To compile this driver as a module, choose M here: the
323 module will be called ks0127.
326 tristate "Philips SAA7110 video decoder"
327 depends on VIDEO_V4L2 && I2C
329 Support for the Philips SAA7110 video decoders.
331 To compile this driver as a module, choose M here: the
332 module will be called saa7110.
335 tristate "Philips SAA7111/3/4/5 video decoders"
336 depends on VIDEO_V4L2 && I2C
338 Support for the Philips SAA7111/3/4/5 video decoders.
340 To compile this driver as a module, choose M here: the
341 module will be called saa7115.
344 tristate "Philips SAA7191 video decoder"
345 depends on VIDEO_V4L2 && I2C
347 Support for the Philips SAA7191 video decoder.
349 To compile this driver as a module, choose M here: the
350 module will be called saa7191.
353 tristate "Texas Instruments TVP514x video decoder"
354 depends on VIDEO_V4L2 && I2C
356 This is a Video4Linux2 sensor-level driver for the TI TVP5146/47
357 decoder. It is currently working with the TI OMAP3 camera
360 To compile this driver as a module, choose M here: the
361 module will be called tvp514x.
364 tristate "Texas Instruments TVP5150 video decoder"
365 depends on VIDEO_V4L2 && I2C
367 Support for the Texas Instruments TVP5150 video decoder.
369 To compile this driver as a module, choose M here: the
370 module will be called tvp5150.
373 tristate "Texas Instruments TVP7002 video decoder"
374 depends on VIDEO_V4L2 && I2C
376 Support for the Texas Instruments TVP7002 video decoder.
378 To compile this driver as a module, choose M here: the
379 module will be called tvp7002.
382 tristate "vpx3220a, vpx3216b & vpx3214c video decoders"
383 depends on VIDEO_V4L2 && I2C
385 Support for VPX322x video decoders.
387 To compile this driver as a module, choose M here: the
388 module will be called vpx3220.
390 comment "Video and audio decoders"
393 tristate "Philips SAA7171/3/4 audio/video decoders"
394 depends on VIDEO_V4L2 && I2C
396 Support for the Philips SAA7171/3/4 audio/video decoders.
398 To compile this driver as a module, choose M here: the
399 module will be called saa717x.
401 source "drivers/media/video/cx25840/Kconfig"
403 comment "MPEG video encoders"
406 tristate "Conexant CX2341x MPEG encoders"
407 depends on VIDEO_V4L2 && VIDEO_V4L2_COMMON
409 Support for the Conexant CX23416 MPEG encoders
410 and CX23415 MPEG encoder/decoders.
412 This module currently supports the encoding functions only.
414 To compile this driver as a module, choose M here: the
415 module will be called cx2341x.
417 comment "Video encoders"
420 tristate "Philips SAA7127/9 digital video encoders"
421 depends on VIDEO_V4L2 && I2C
423 Support for the Philips SAA7127/9 digital video encoders.
425 To compile this driver as a module, choose M here: the
426 module will be called saa7127.
429 tristate "Philips SAA7185 video encoder"
430 depends on VIDEO_V4L2 && I2C
432 Support for the Philips SAA7185 video encoder.
434 To compile this driver as a module, choose M here: the
435 module will be called saa7185.
438 tristate "Analog Devices ADV7170 video encoder"
439 depends on VIDEO_V4L2 && I2C
441 Support for the Analog Devices ADV7170 video encoder driver
443 To compile this driver as a module, choose M here: the
444 module will be called adv7170.
447 tristate "Analog Devices ADV7175 video encoder"
448 depends on VIDEO_V4L2 && I2C
450 Support for the Analog Devices ADV7175 video encoder driver
452 To compile this driver as a module, choose M here: the
453 module will be called adv7175.
456 tristate "ADV7343 video encoder"
459 Support for Analog Devices I2C bus based ADV7343 encoder.
461 To compile this driver as a module, choose M here: the
462 module will be called adv7343.
465 tristate "AK8813/AK8814 video encoders"
468 Video output driver for AKM AK8813 and AK8814 TV encoders
470 comment "Camera sensor devices"
472 config VIDEO_APTINA_PLL
476 tristate "OmniVision OV7670 sensor support"
477 depends on I2C && VIDEO_V4L2
479 This is a Video4Linux2 sensor-level driver for the OmniVision
480 OV7670 VGA camera. It currently only works with the M88ALP01
484 tristate "ST VS6624 sensor support"
485 depends on VIDEO_V4L2 && I2C
487 This is a Video4Linux2 sensor-level driver for the ST VS6624
490 To compile this driver as a module, choose M here: the
491 module will be called vs6624.
494 tristate "Aptina MT9P031 support"
495 depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
497 This is a Video4Linux2 sensor-level driver for the Aptina
498 (Micron) mt9p031 5 Mpixel camera.
501 tristate "Aptina MT9T001 support"
502 depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
504 This is a Video4Linux2 sensor-level driver for the Aptina
505 (Micron) mt0t001 3 Mpixel camera.
508 tristate "Micron mt9v011 sensor support"
509 depends on I2C && VIDEO_V4L2
511 This is a Video4Linux2 sensor-level driver for the Micron
512 mt0v011 1.3 Mpixel camera. It currently only works with the
516 tristate "Micron MT9V032 sensor support"
517 depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
519 This is a Video4Linux2 sensor-level driver for the Micron
520 MT9V032 752x480 CMOS sensor.
523 tristate "TCM825x camera sensor support"
524 depends on I2C && VIDEO_V4L2
526 This is a driver for the Toshiba TCM825x VGA camera sensor.
527 It is used for example in Nokia N800.
529 config VIDEO_SR030PC30
530 tristate "Siliconfile SR030PC30 sensor support"
531 depends on I2C && VIDEO_V4L2
533 This driver supports SR030PC30 VGA camera from Siliconfile
535 config VIDEO_NOON010PC30
536 tristate "Siliconfile NOON010PC30 sensor support"
537 depends on I2C && VIDEO_V4L2 && EXPERIMENTAL && VIDEO_V4L2_SUBDEV_API
539 This driver supports NOON010PC30 CIF camera from Siliconfile
541 source "drivers/media/video/m5mols/Kconfig"
544 tristate "Samsung S5K6AAFX sensor support"
545 depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
547 This is a V4L2 sensor-level driver for Samsung S5K6AA(FX) 1.3M
548 camera sensor with an embedded SoC image signal processor.
550 comment "Flash devices"
553 tristate "ADP1653 flash support"
554 depends on I2C && VIDEO_V4L2 && MEDIA_CONTROLLER
556 This is a driver for the ADP1653 flash controller. It is used for
557 example in Nokia N900.
560 tristate "AS3645A flash driver support"
561 depends on I2C && VIDEO_V4L2 && MEDIA_CONTROLLER
563 This is a driver for the AS3645A and LM3555 flash controllers. It has
564 build in control for flash, torch and indicator LEDs.
566 comment "Video improvement chips"
568 config VIDEO_UPD64031A
569 tristate "NEC Electronics uPD64031A Ghost Reduction"
570 depends on VIDEO_V4L2 && I2C
572 Support for the NEC Electronics uPD64031A Ghost Reduction
573 video chip. It is most often found in NTSC TV cards made for
574 Japan and is used to reduce the 'ghosting' effect that can
575 be present in analog TV broadcasts.
577 To compile this driver as a module, choose M here: the
578 module will be called upd64031a.
580 config VIDEO_UPD64083
581 tristate "NEC Electronics uPD64083 3-Dimensional Y/C separation"
582 depends on VIDEO_V4L2 && I2C
584 Support for the NEC Electronics uPD64083 3-Dimensional Y/C
585 separation video chip. It is used to improve the quality of
586 the colors of a composite signal.
588 To compile this driver as a module, choose M here: the
589 module will be called upd64083.
591 comment "Miscelaneous helper chips"
594 tristate "THS7303 Video Amplifier"
597 Support for TI THS7303 video amplifier
599 To compile this driver as a module, choose M here: the
600 module will be called ths7303.
603 tristate "Mitsubishi M52790 A/V switch"
604 depends on VIDEO_V4L2 && I2C
606 Support for the Mitsubishi M52790 A/V switch.
608 To compile this driver as a module, choose M here: the
609 module will be called m52790.
611 endmenu # encoder / decoder chips
614 tristate "Virtual Video Driver"
615 depends on VIDEO_DEV && VIDEO_V4L2 && !SPARC32 && !SPARC64
616 depends on FRAMEBUFFER_CONSOLE || STI_CONSOLE
618 select VIDEOBUF2_VMALLOC
621 Enables a virtual video driver. This device shows a color bar
622 and a timestamp, as a real device would generate by using V4L2
624 Say Y here if you want to test video apps or debug V4L devices.
628 # USB Multimedia device configuration
631 menuconfig V4L_USB_DRIVERS
632 bool "V4L USB devices"
638 source "drivers/media/video/uvc/Kconfig"
640 source "drivers/media/video/gspca/Kconfig"
642 source "drivers/media/video/pvrusb2/Kconfig"
644 source "drivers/media/video/hdpvr/Kconfig"
646 source "drivers/media/video/em28xx/Kconfig"
648 source "drivers/media/video/tlg2300/Kconfig"
650 source "drivers/media/video/cx231xx/Kconfig"
652 source "drivers/media/video/tm6000/Kconfig"
654 source "drivers/media/video/usbvision/Kconfig"
656 source "drivers/media/video/et61x251/Kconfig"
658 source "drivers/media/video/sn9c102/Kconfig"
660 source "drivers/media/video/pwc/Kconfig"
662 source "drivers/media/video/cpia2/Kconfig"
665 tristate "USB ZR364XX Camera support"
666 depends on VIDEO_V4L2
668 select VIDEOBUF_VMALLOC
670 Say Y here if you want to connect this type of camera to your
672 See <file:Documentation/video4linux/zr364xx.txt> for more info
673 and list of supported cameras.
675 To compile this driver as a module, choose M here: the
676 module will be called zr364xx.
679 tristate "USB Syntek DC1125 Camera support"
680 depends on VIDEO_V4L2 && EXPERIMENTAL
682 Say Y here if you want to use this type of camera.
683 Supported devices are typically found in some Asus laptops,
684 with USB id 174f:a311 and 05e1:0501. Other Syntek cameras
685 may be supported by the stk11xx driver, from which this is
686 derived, see <http://sourceforge.net/projects/syntekdriver/>
688 To compile this driver as a module, choose M here: the
689 module will be called stkwebcam.
692 tristate "USB Sensoray 2255 video capture device"
693 depends on VIDEO_V4L2
694 select VIDEOBUF_VMALLOC
697 Say Y here if you want support for the Sensoray 2255 USB device.
698 This driver can be compiled as a module, called s2255drv.
700 endif # V4L_USB_DRIVERS
703 # PCI drivers configuration
706 menuconfig V4L_PCI_DRIVERS
707 bool "V4L PCI(e) devices"
711 Say Y here to enable support for these PCI(e) drivers.
715 source "drivers/media/video/au0828/Kconfig"
717 source "drivers/media/video/bt8xx/Kconfig"
719 source "drivers/media/video/cx18/Kconfig"
721 source "drivers/media/video/cx23885/Kconfig"
723 source "drivers/media/video/cx25821/Kconfig"
725 source "drivers/media/video/cx88/Kconfig"
727 config VIDEO_HEXIUM_GEMINI
728 tristate "Hexium Gemini frame grabber"
729 depends on PCI && VIDEO_V4L2 && I2C
730 select VIDEO_SAA7146_VV
732 This is a video4linux driver for the Hexium Gemini frame
733 grabber card by Hexium. Please note that the Gemini Dual
734 card is *not* fully supported.
736 To compile this driver as a module, choose M here: the
737 module will be called hexium_gemini.
739 config VIDEO_HEXIUM_ORION
740 tristate "Hexium HV-PCI6 and Orion frame grabber"
741 depends on PCI && VIDEO_V4L2 && I2C
742 select VIDEO_SAA7146_VV
744 This is a video4linux driver for the Hexium HV-PCI6 and
745 Orion frame grabber cards by Hexium.
747 To compile this driver as a module, choose M here: the
748 module will be called hexium_orion.
750 source "drivers/media/video/ivtv/Kconfig"
753 tristate "Sony Vaio Picturebook Motion Eye Video For Linux"
754 depends on PCI && SONY_LAPTOP && VIDEO_V4L2
756 This is the video4linux driver for the Motion Eye camera found
757 in the Vaio Picturebook laptops. Please read the material in
758 <file:Documentation/video4linux/meye.txt> for more information.
760 If you say Y or M here, you need to say Y or M to "Sony Laptop
761 Extras" in the misc device section.
763 To compile this driver as a module, choose M here: the
764 module will be called meye.
767 tristate "Siemens-Nixdorf 'Multimedia eXtension Board'"
768 depends on PCI && VIDEO_V4L2 && I2C
769 select VIDEO_SAA7146_VV
771 select VIDEO_SAA711X if VIDEO_HELPER_CHIPS_AUTO
772 select VIDEO_TDA9840 if VIDEO_HELPER_CHIPS_AUTO
773 select VIDEO_TEA6415C if VIDEO_HELPER_CHIPS_AUTO
774 select VIDEO_TEA6420 if VIDEO_HELPER_CHIPS_AUTO
776 This is a video4linux driver for the 'Multimedia eXtension Board'
777 TV card by Siemens-Nixdorf.
779 To compile this driver as a module, choose M here: the
780 module will be called mxb.
782 source "drivers/media/video/saa7134/Kconfig"
784 source "drivers/media/video/saa7164/Kconfig"
786 source "drivers/media/video/zoran/Kconfig"
788 endif # V4L_PCI_DRIVERS
791 # ISA & parallel port drivers configuration
794 menuconfig V4L_ISA_PARPORT_DRIVERS
795 bool "V4L ISA and parallel port devices"
796 depends on ISA || PARPORT
799 Say Y here to enable support for these ISA and parallel port drivers.
801 if V4L_ISA_PARPORT_DRIVERS
804 tristate "Quickcam BW Video For Linux"
805 depends on PARPORT && VIDEO_V4L2
807 Say Y have if you the black and white version of the QuickCam
808 camera. See the next option for the color version.
810 To compile this driver as a module, choose M here: the
811 module will be called bw-qcam.
814 tristate "QuickCam Colour Video For Linux"
815 depends on PARPORT && VIDEO_V4L2
817 This is the video4linux driver for the colour version of the
818 Connectix QuickCam. If you have one of these cameras, say Y here,
819 otherwise say N. This driver does not work with the original
820 monochrome QuickCam, QuickCam VC or QuickClip. It is also available
821 as a module (c-qcam).
822 Read <file:Documentation/video4linux/CQcam.txt> for more information.
825 tristate "Mediavision Pro Movie Studio Video For Linux"
826 depends on ISA && VIDEO_V4L2
828 Say Y if you have the ISA Mediavision Pro Movie Studio
831 To compile this driver as a module, choose M here: the
832 module will be called pms.
835 tristate "W9966CF Webcam (FlyCam Supra and others) Video For Linux"
836 depends on PARPORT_1284 && PARPORT && VIDEO_V4L2
838 Video4linux driver for Winbond's w9966 based Webcams.
839 Currently tested with the LifeView FlyCam Supra.
840 If you have one of these cameras, say Y here
842 This driver is also available as a module (w9966).
844 Check out <file:Documentation/video4linux/w9966.txt> for more
847 endif # V4L_ISA_PARPORT_DRIVERS
849 menuconfig V4L_PLATFORM_DRIVERS
850 bool "V4L platform devices"
853 Say Y here to enable support for platform-specific V4L drivers.
855 if V4L_PLATFORM_DRIVERS
857 source "drivers/media/video/marvell-ccic/Kconfig"
859 config VIDEO_VIA_CAMERA
860 tristate "VIAFB camera controller support"
862 select VIDEOBUF_DMA_SG
865 Driver support for the integrated camera controller in VIA
866 Chrome9 chipsets. Currently only tested on OLPC xo-1.5 systems
870 # Platform multimedia device configuration
873 source "drivers/media/video/davinci/Kconfig"
875 source "drivers/media/video/omap/Kconfig"
877 source "drivers/media/video/blackfin/Kconfig"
880 tristate "SuperH VOU video output driver"
881 depends on VIDEO_DEV && ARCH_SHMOBILE
882 select VIDEOBUF_DMA_CONTIG
884 Support for the Video Output Unit (VOU) on SuperH SoCs.
887 tristate "Freescale VIU Video Driver"
888 depends on VIDEO_V4L2 && PPC_MPC512x
889 select VIDEOBUF_DMA_CONTIG
892 Support for Freescale VIU video driver. This device captures
893 video data, or overlays video on DIU frame buffer.
895 Say Y here if you want to enable VIU device on MPC5121e Rev2+.
898 config VIDEO_TIMBERDALE
899 tristate "Support for timberdale Video In/LogiWIN"
900 depends on VIDEO_V4L2 && I2C && DMADEVICES
904 select VIDEOBUF_DMA_CONTIG
906 Add support for the Video In peripherial of the timberdale FPGA.
909 tristate "SGI Vino Video For Linux"
910 depends on I2C && SGI_IP22 && VIDEO_V4L2
911 select VIDEO_SAA7191 if VIDEO_HELPER_CHIPS_AUTO
913 Say Y here to build in support for the Vino video input system found
914 on SGI Indy machines.
917 tristate "AR devices"
918 depends on M32R && VIDEO_V4L2
920 This is a video4linux driver for the Renesas AR (Artificial Retina)
923 config VIDEO_M32R_AR_M64278
924 tristate "AR device with color module M64278(VGA)"
925 depends on PLAT_M32700UT
928 This is a video4linux driver for the Renesas AR (Artificial
929 Retina) with M64278E-800 camera module.
930 This module supports VGA(640x480 pixels) resolutions.
932 To compile this driver as a module, choose M here: the
933 module will be called arv.
936 tristate "OMAP 3 Camera support (EXPERIMENTAL)"
937 depends on OMAP_IOVMM && VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API && ARCH_OMAP3 && EXPERIMENTAL
939 Driver for an OMAP 3 camera controller.
941 config VIDEO_OMAP3_DEBUG
942 bool "OMAP 3 Camera debug messages"
943 depends on VIDEO_OMAP3
945 Enable debug messages on OMAP 3 camera controller driver.
948 tristate "SoC camera support"
949 depends on VIDEO_V4L2 && HAS_DMA && I2C
951 select VIDEOBUF2_CORE
953 SoC Camera is a common API to several cameras, not connecting
954 over a bus like PCI or USB. For example some i2c camera connected
955 directly to the data bus of an SoC.
957 config SOC_CAMERA_IMX074
958 tristate "imx074 support"
959 depends on SOC_CAMERA && I2C
961 This driver supports IMX074 cameras from Sony
963 config SOC_CAMERA_MT9M001
964 tristate "mt9m001 support"
965 depends on SOC_CAMERA && I2C
966 select GPIO_PCA953X if MT9M001_PCA9536_SWITCH
968 This driver supports MT9M001 cameras from Micron, monochrome
971 config SOC_CAMERA_MT9M111
972 tristate "mt9m111, mt9m112 and mt9m131 support"
973 depends on SOC_CAMERA && I2C
975 This driver supports MT9M111, MT9M112 and MT9M131 cameras from
978 config SOC_CAMERA_MT9T031
979 tristate "mt9t031 support"
980 depends on SOC_CAMERA && I2C
982 This driver supports MT9T031 cameras from Micron.
984 config SOC_CAMERA_MT9T112
985 tristate "mt9t112 support"
986 depends on SOC_CAMERA && I2C
988 This driver supports MT9T112 cameras from Aptina.
990 config SOC_CAMERA_MT9V022
991 tristate "mt9v022 support"
992 depends on SOC_CAMERA && I2C
993 select GPIO_PCA953X if MT9V022_PCA9536_SWITCH
995 This driver supports MT9V022 cameras from Micron
997 config SOC_CAMERA_RJ54N1
998 tristate "rj54n1cb0c support"
999 depends on SOC_CAMERA && I2C
1001 This is a rj54n1cb0c video driver
1003 config SOC_CAMERA_TW9910
1004 tristate "tw9910 support"
1005 depends on SOC_CAMERA && I2C
1007 This is a tw9910 video driver
1009 config SOC_CAMERA_PLATFORM
1010 tristate "platform camera support"
1011 depends on SOC_CAMERA
1013 This is a generic SoC camera platform driver, useful for testing
1015 config SOC_CAMERA_OV2640
1016 tristate "ov2640 camera support"
1017 depends on SOC_CAMERA && I2C
1019 This is a ov2640 camera driver
1021 config SOC_CAMERA_OV5642
1022 tristate "ov5642 camera support"
1023 depends on SOC_CAMERA && I2C
1025 This is a V4L2 camera driver for the OmniVision OV5642 sensor
1027 config SOC_CAMERA_OV6650
1028 tristate "ov6650 sensor support"
1029 depends on SOC_CAMERA && I2C
1031 This is a V4L2 SoC camera driver for the OmniVision OV6650 sensor
1033 config SOC_CAMERA_OV772X
1034 tristate "ov772x camera support"
1035 depends on SOC_CAMERA && I2C
1037 This is a ov772x camera driver
1039 config SOC_CAMERA_OV9640
1040 tristate "ov9640 camera support"
1041 depends on SOC_CAMERA && I2C
1043 This is a ov9640 camera driver
1045 config SOC_CAMERA_OV9740
1046 tristate "ov9740 camera support"
1047 depends on SOC_CAMERA && I2C
1049 This is a ov9740 camera driver
1055 tristate "i.MX1/i.MXL CMOS Sensor Interface driver"
1056 depends on VIDEO_DEV && ARCH_MX1 && SOC_CAMERA
1058 select VIDEOBUF_DMA_CONTIG
1061 This is a v4l2 driver for the i.MX1/i.MXL CMOS Sensor Interface
1067 tristate "i.MX3x Camera Sensor Interface driver"
1068 depends on VIDEO_DEV && MX3_IPU && SOC_CAMERA
1069 select VIDEOBUF2_DMA_CONTIG
1072 This is a v4l2 driver for the i.MX3x Camera Sensor Interface
1075 tristate "PXA27x Quick Capture Interface driver"
1076 depends on VIDEO_DEV && PXA27x && SOC_CAMERA
1077 select VIDEOBUF_DMA_SG
1079 This is a v4l2 driver for the PXA27x Quick Capture Interface
1081 config VIDEO_SH_MOBILE_CSI2
1082 tristate "SuperH Mobile MIPI CSI-2 Interface driver"
1083 depends on VIDEO_DEV && SOC_CAMERA && HAVE_CLK
1085 This is a v4l2 driver for the SuperH MIPI CSI-2 Interface
1087 config VIDEO_SH_MOBILE_CEU
1088 tristate "SuperH Mobile CEU Interface driver"
1089 depends on VIDEO_DEV && SOC_CAMERA && HAS_DMA && HAVE_CLK
1090 select VIDEOBUF2_DMA_CONTIG
1092 This is a v4l2 driver for the SuperH Mobile CEU Interface
1095 tristate "OMAP1 Camera Interface driver"
1096 depends on VIDEO_DEV && ARCH_OMAP1 && SOC_CAMERA
1097 select VIDEOBUF_DMA_CONTIG
1098 select VIDEOBUF_DMA_SG
1100 This is a v4l2 driver for the TI OMAP1 camera interface
1103 tristate "OMAP2 Camera Capture Interface driver"
1104 depends on VIDEO_DEV && ARCH_OMAP2
1105 select VIDEOBUF_DMA_SG
1107 This is a v4l2 driver for the TI OMAP2 camera capture interface
1109 config VIDEO_MX2_HOSTSUPPORT
1113 tristate "i.MX27/i.MX25 Camera Sensor Interface driver"
1114 depends on VIDEO_DEV && SOC_CAMERA && (MACH_MX27 || ARCH_MX25)
1115 select VIDEOBUF2_DMA_CONTIG
1116 select VIDEO_MX2_HOSTSUPPORT
1118 This is a v4l2 driver for the i.MX27 and the i.MX25 Camera Sensor
1121 config VIDEO_SAMSUNG_S5P_FIMC
1122 tristate "Samsung S5P and EXYNOS4 camera interface driver (EXPERIMENTAL)"
1123 depends on VIDEO_V4L2 && I2C && PLAT_S5P && PM_RUNTIME && \
1124 VIDEO_V4L2_SUBDEV_API && EXPERIMENTAL
1125 select VIDEOBUF2_DMA_CONTIG
1126 select V4L2_MEM2MEM_DEV
1128 This is a v4l2 driver for Samsung S5P and EXYNOS4 camera
1129 host interface and video postprocessor.
1131 To compile this driver as a module, choose M here: the
1132 module will be called s5p-fimc.
1134 config VIDEO_ATMEL_ISI
1135 tristate "ATMEL Image Sensor Interface (ISI) support"
1136 depends on VIDEO_DEV && SOC_CAMERA && ARCH_AT91
1137 select VIDEOBUF2_DMA_CONTIG
1139 This module makes the ATMEL Image Sensor Interface available
1142 config VIDEO_S5P_MIPI_CSIS
1143 tristate "Samsung S5P and EXYNOS4 MIPI CSI receiver driver"
1144 depends on VIDEO_V4L2 && PM_RUNTIME && PLAT_S5P
1145 depends on VIDEO_V4L2_SUBDEV_API && REGULATOR
1147 This is a v4l2 driver for Samsung S5P/EXYNOS4 MIPI-CSI receiver.
1149 To compile this driver as a module, choose M here: the
1150 module will be called s5p-csis.
1152 source "drivers/media/video/s5p-tv/Kconfig"
1154 endif # V4L_PLATFORM_DRIVERS
1155 endif # VIDEO_CAPTURE_DRIVERS
1157 menuconfig V4L_MEM2MEM_DRIVERS
1158 bool "Memory-to-memory multimedia devices"
1159 depends on VIDEO_V4L2
1162 Say Y here to enable selecting drivers for V4L devices that
1163 use system memory for both source and destination buffers, as opposed
1164 to capture and output drivers, which use memory buffers for just
1167 if V4L_MEM2MEM_DRIVERS
1169 config VIDEO_MEM2MEM_TESTDEV
1170 tristate "Virtual test device for mem2mem framework"
1171 depends on VIDEO_DEV && VIDEO_V4L2
1172 select VIDEOBUF2_VMALLOC
1173 select V4L2_MEM2MEM_DEV
1176 This is a virtual test device for the memory-to-memory driver
1179 config VIDEO_SAMSUNG_S5P_G2D
1180 tristate "Samsung S5P and EXYNOS4 G2D 2d graphics accelerator driver"
1181 depends on VIDEO_DEV && VIDEO_V4L2 && PLAT_S5P
1182 select VIDEOBUF2_DMA_CONTIG
1183 select V4L2_MEM2MEM_DEV
1186 This is a v4l2 driver for Samsung S5P and EXYNOS4 G2D
1187 2d graphics accelerator.
1189 config VIDEO_SAMSUNG_S5P_JPEG
1190 tristate "Samsung S5P/Exynos4 JPEG codec driver (EXPERIMENTAL)"
1191 depends on VIDEO_DEV && VIDEO_V4L2 && PLAT_S5P && EXPERIMENTAL
1192 select VIDEOBUF2_DMA_CONTIG
1193 select V4L2_MEM2MEM_DEV
1195 This is a v4l2 driver for Samsung S5P and EXYNOS4 JPEG codec
1197 config VIDEO_SAMSUNG_S5P_MFC
1198 tristate "Samsung S5P MFC 5.1 Video Codec"
1199 depends on VIDEO_DEV && VIDEO_V4L2 && PLAT_S5P
1200 select VIDEOBUF2_DMA_CONTIG
1203 MFC 5.1 driver for V4L2.
1205 config VIDEO_MX2_EMMAPRP
1206 tristate "MX2 eMMa-PrP support"
1207 depends on VIDEO_DEV && VIDEO_V4L2 && SOC_IMX27
1208 select VIDEOBUF2_DMA_CONTIG
1209 select V4L2_MEM2MEM_DEV
1211 MX2X chips have a PrP that can be used to process buffers from
1212 memory to memory. Operations include resizing and format
1215 endif # V4L_MEM2MEM_DRIVERS