5 this file has configuration informations - card-specific stuff
6 like the big tvcards array for the most part
8 Copyright (C) 1996,97,98 Ralph Metzler (rjkm@thp.uni-koeln.de)
9 & Marcus Metzler (mocm@thp.uni-koeln.de)
10 (c) 1999-2001 Gerd Knorr <kraxel@goldbach.in-berlin.de>
12 This program is free software; you can redistribute it and/or modify
13 it under the terms of the GNU General Public License as published by
14 the Free Software Foundation; either version 2 of the License, or
15 (at your option) any later version.
17 This program is distributed in the hope that it will be useful,
18 but WITHOUT ANY WARRANTY; without even the implied warranty of
19 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
20 GNU General Public License for more details.
22 You should have received a copy of the GNU General Public License
23 along with this program; if not, write to the Free Software
24 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
28 #include <linux/delay.h>
29 #include <linux/module.h>
30 #include <linux/kmod.h>
31 #include <linux/init.h>
32 #include <linux/pci.h>
33 #include <linux/vmalloc.h>
34 #include <linux/firmware.h>
35 #include <net/checksum.h>
37 #include <asm/unaligned.h>
41 #include <media/v4l2-common.h>
42 #include <media/tvaudio.h>
43 #include "bttv-audio-hook.h"
46 static void boot_msp34xx(struct bttv *btv, int pin);
47 static void hauppauge_eeprom(struct bttv *btv);
48 static void avermedia_eeprom(struct bttv *btv);
49 static void osprey_eeprom(struct bttv *btv, const u8 ee[256]);
50 static void modtec_eeprom(struct bttv *btv);
51 static void init_PXC200(struct bttv *btv);
52 static void init_RTV24(struct bttv *btv);
54 static void rv605_muxsel(struct bttv *btv, unsigned int input);
55 static void eagle_muxsel(struct bttv *btv, unsigned int input);
56 static void xguard_muxsel(struct bttv *btv, unsigned int input);
57 static void ivc120_muxsel(struct bttv *btv, unsigned int input);
58 static void gvc1100_muxsel(struct bttv *btv, unsigned int input);
60 static void PXC200_muxsel(struct bttv *btv, unsigned int input);
62 static void picolo_tetra_muxsel(struct bttv *btv, unsigned int input);
63 static void picolo_tetra_init(struct bttv *btv);
65 static void tibetCS16_muxsel(struct bttv *btv, unsigned int input);
66 static void tibetCS16_init(struct bttv *btv);
68 static void kodicom4400r_muxsel(struct bttv *btv, unsigned int input);
69 static void kodicom4400r_init(struct bttv *btv);
71 static void sigmaSLC_muxsel(struct bttv *btv, unsigned int input);
72 static void sigmaSQ_muxsel(struct bttv *btv, unsigned int input);
74 static void geovision_muxsel(struct bttv *btv, unsigned int input);
76 static void phytec_muxsel(struct bttv *btv, unsigned int input);
78 static void gv800s_muxsel(struct bttv *btv, unsigned int input);
79 static void gv800s_init(struct bttv *btv);
81 static int terratec_active_radio_upgrade(struct bttv *btv);
82 static int tea5757_read(struct bttv *btv);
83 static int tea5757_write(struct bttv *btv, int value);
84 static void identify_by_eeprom(struct bttv *btv,
85 unsigned char eeprom_data[256]);
86 static int __devinit pvr_boot(struct bttv *btv);
88 /* config variables */
89 static unsigned int triton1;
90 static unsigned int vsfx;
91 static unsigned int latency = UNSET;
94 static unsigned int card[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
95 static unsigned int pll[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
96 static unsigned int tuner[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
97 static unsigned int svhs[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
98 static unsigned int remote[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
99 static struct bttv *master[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = NULL };
101 static unsigned int autoload = 1;
103 static unsigned int autoload;
105 static unsigned int gpiomask = UNSET;
106 static unsigned int audioall = UNSET;
107 static unsigned int audiomux[5] = { [ 0 ... 4 ] = UNSET };
110 module_param(triton1, int, 0444);
111 module_param(vsfx, int, 0444);
112 module_param(no_overlay, int, 0444);
113 module_param(latency, int, 0444);
114 module_param(gpiomask, int, 0444);
115 module_param(audioall, int, 0444);
116 module_param(autoload, int, 0444);
118 module_param_array(card, int, NULL, 0444);
119 module_param_array(pll, int, NULL, 0444);
120 module_param_array(tuner, int, NULL, 0444);
121 module_param_array(svhs, int, NULL, 0444);
122 module_param_array(remote, int, NULL, 0444);
123 module_param_array(audiomux, int, NULL, 0444);
125 MODULE_PARM_DESC(triton1,"set ETBF pci config bit "
126 "[enable bug compatibility for triton1 + others]");
127 MODULE_PARM_DESC(vsfx,"set VSFX pci config bit "
128 "[yet another chipset flaw workaround]");
129 MODULE_PARM_DESC(latency,"pci latency timer");
130 MODULE_PARM_DESC(card,"specify TV/grabber card model, see CARDLIST file for a list");
131 MODULE_PARM_DESC(pll,"specify installed crystal (0=none, 28=28 MHz, 35=35 MHz)");
132 MODULE_PARM_DESC(tuner,"specify installed tuner type");
133 MODULE_PARM_DESC(autoload,"automatically load i2c modules like tuner.o, default is 1 (yes)");
134 MODULE_PARM_DESC(no_overlay,"allow override overlay default (0 disables, 1 enables)"
135 " [some VIA/SIS chipsets are known to have problem with overlay]");
137 /* ----------------------------------------------------------------------- */
138 /* list of card IDs for bt878+ cards */
144 } cards[] __devinitdata = {
145 { 0x13eb0070, BTTV_BOARD_HAUPPAUGE878, "Hauppauge WinTV" },
146 { 0x39000070, BTTV_BOARD_HAUPPAUGE878, "Hauppauge WinTV-D" },
147 { 0x45000070, BTTV_BOARD_HAUPPAUGEPVR, "Hauppauge WinTV/PVR" },
148 { 0xff000070, BTTV_BOARD_OSPREY1x0, "Osprey-100" },
149 { 0xff010070, BTTV_BOARD_OSPREY2x0_SVID,"Osprey-200" },
150 { 0xff020070, BTTV_BOARD_OSPREY500, "Osprey-500" },
151 { 0xff030070, BTTV_BOARD_OSPREY2000, "Osprey-2000" },
152 { 0xff040070, BTTV_BOARD_OSPREY540, "Osprey-540" },
153 { 0xff070070, BTTV_BOARD_OSPREY440, "Osprey-440" },
155 { 0x00011002, BTTV_BOARD_ATI_TVWONDER, "ATI TV Wonder" },
156 { 0x00031002, BTTV_BOARD_ATI_TVWONDERVE,"ATI TV Wonder/VE" },
158 { 0x6606107d, BTTV_BOARD_WINFAST2000, "Leadtek WinFast TV 2000" },
159 { 0x6607107d, BTTV_BOARD_WINFASTVC100, "Leadtek WinFast VC 100" },
160 { 0x6609107d, BTTV_BOARD_WINFAST2000, "Leadtek TV 2000 XP" },
161 { 0x263610b4, BTTV_BOARD_STB2, "STB TV PCI FM, Gateway P/N 6000704" },
162 { 0x264510b4, BTTV_BOARD_STB2, "STB TV PCI FM, Gateway P/N 6000704" },
163 { 0x402010fc, BTTV_BOARD_GVBCTV3PCI, "I-O Data Co. GV-BCTV3/PCI" },
164 { 0x405010fc, BTTV_BOARD_GVBCTV4PCI, "I-O Data Co. GV-BCTV4/PCI" },
165 { 0x407010fc, BTTV_BOARD_GVBCTV5PCI, "I-O Data Co. GV-BCTV5/PCI" },
166 { 0xd01810fc, BTTV_BOARD_GVBCTV5PCI, "I-O Data Co. GV-BCTV5/PCI" },
168 { 0x001211bd, BTTV_BOARD_PINNACLE, "Pinnacle PCTV" },
169 /* some cards ship with byteswapped IDs ... */
170 { 0x1200bd11, BTTV_BOARD_PINNACLE, "Pinnacle PCTV [bswap]" },
171 { 0xff00bd11, BTTV_BOARD_PINNACLE, "Pinnacle PCTV [bswap]" },
172 /* this seems to happen as well ... */
173 { 0xff1211bd, BTTV_BOARD_PINNACLE, "Pinnacle PCTV" },
175 { 0x3000121a, BTTV_BOARD_VOODOOTV_200, "3Dfx VoodooTV 200" },
176 { 0x263710b4, BTTV_BOARD_VOODOOTV_FM, "3Dfx VoodooTV FM" },
177 { 0x3060121a, BTTV_BOARD_STB2, "3Dfx VoodooTV 100/ STB OEM" },
179 { 0x3000144f, BTTV_BOARD_MAGICTVIEW063, "(Askey Magic/others) TView99 CPH06x" },
180 { 0xa005144f, BTTV_BOARD_MAGICTVIEW063, "CPH06X TView99-Card" },
181 { 0x3002144f, BTTV_BOARD_MAGICTVIEW061, "(Askey Magic/others) TView99 CPH05x" },
182 { 0x3005144f, BTTV_BOARD_MAGICTVIEW061, "(Askey Magic/others) TView99 CPH061/06L (T1/LC)" },
183 { 0x5000144f, BTTV_BOARD_MAGICTVIEW061, "Askey CPH050" },
184 { 0x300014ff, BTTV_BOARD_MAGICTVIEW061, "TView 99 (CPH061)" },
185 { 0x300214ff, BTTV_BOARD_PHOEBE_TVMAS, "Phoebe TV Master (CPH060)" },
187 { 0x00011461, BTTV_BOARD_AVPHONE98, "AVerMedia TVPhone98" },
188 { 0x00021461, BTTV_BOARD_AVERMEDIA98, "AVermedia TVCapture 98" },
189 { 0x00031461, BTTV_BOARD_AVPHONE98, "AVerMedia TVPhone98" },
190 { 0x00041461, BTTV_BOARD_AVERMEDIA98, "AVerMedia TVCapture 98" },
191 { 0x03001461, BTTV_BOARD_AVERMEDIA98, "VDOMATE TV TUNER CARD" },
193 { 0x1117153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (Philips PAL B/G)" },
194 { 0x1118153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (Temic PAL B/G)" },
195 { 0x1119153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (Philips PAL I)" },
196 { 0x111a153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (Temic PAL I)" },
198 { 0x1123153b, BTTV_BOARD_TERRATVRADIO, "Terratec TV Radio+" },
199 { 0x1127153b, BTTV_BOARD_TERRATV, "Terratec TV+ (V1.05)" },
200 /* clashes with FlyVideo
201 *{ 0x18521852, BTTV_BOARD_TERRATV, "Terratec TV+ (V1.10)" }, */
202 { 0x1134153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (LR102)" },
203 { 0x1135153b, BTTV_BOARD_TERRATVALUER, "Terratec TValue Radio" }, /* LR102 */
204 { 0x5018153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue" }, /* ?? */
205 { 0xff3b153b, BTTV_BOARD_TERRATVALUER, "Terratec TValue Radio" }, /* ?? */
207 { 0x400015b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV" },
208 { 0x400a15b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV" },
209 { 0x400d15b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
210 { 0x401015b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
211 { 0x401615b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
213 { 0x1430aa00, BTTV_BOARD_PV143, "Provideo PV143A" },
214 { 0x1431aa00, BTTV_BOARD_PV143, "Provideo PV143B" },
215 { 0x1432aa00, BTTV_BOARD_PV143, "Provideo PV143C" },
216 { 0x1433aa00, BTTV_BOARD_PV143, "Provideo PV143D" },
217 { 0x1433aa03, BTTV_BOARD_PV143, "Security Eyes" },
219 { 0x1460aa00, BTTV_BOARD_PV150, "Provideo PV150A-1" },
220 { 0x1461aa01, BTTV_BOARD_PV150, "Provideo PV150A-2" },
221 { 0x1462aa02, BTTV_BOARD_PV150, "Provideo PV150A-3" },
222 { 0x1463aa03, BTTV_BOARD_PV150, "Provideo PV150A-4" },
224 { 0x1464aa04, BTTV_BOARD_PV150, "Provideo PV150B-1" },
225 { 0x1465aa05, BTTV_BOARD_PV150, "Provideo PV150B-2" },
226 { 0x1466aa06, BTTV_BOARD_PV150, "Provideo PV150B-3" },
227 { 0x1467aa07, BTTV_BOARD_PV150, "Provideo PV150B-4" },
229 { 0xa132ff00, BTTV_BOARD_IVC100, "IVC-100" },
230 { 0xa1550000, BTTV_BOARD_IVC200, "IVC-200" },
231 { 0xa1550001, BTTV_BOARD_IVC200, "IVC-200" },
232 { 0xa1550002, BTTV_BOARD_IVC200, "IVC-200" },
233 { 0xa1550003, BTTV_BOARD_IVC200, "IVC-200" },
234 { 0xa1550100, BTTV_BOARD_IVC200, "IVC-200G" },
235 { 0xa1550101, BTTV_BOARD_IVC200, "IVC-200G" },
236 { 0xa1550102, BTTV_BOARD_IVC200, "IVC-200G" },
237 { 0xa1550103, BTTV_BOARD_IVC200, "IVC-200G" },
238 { 0xa182ff00, BTTV_BOARD_IVC120, "IVC-120G" },
239 { 0xa182ff01, BTTV_BOARD_IVC120, "IVC-120G" },
240 { 0xa182ff02, BTTV_BOARD_IVC120, "IVC-120G" },
241 { 0xa182ff03, BTTV_BOARD_IVC120, "IVC-120G" },
242 { 0xa182ff04, BTTV_BOARD_IVC120, "IVC-120G" },
243 { 0xa182ff05, BTTV_BOARD_IVC120, "IVC-120G" },
244 { 0xa182ff06, BTTV_BOARD_IVC120, "IVC-120G" },
245 { 0xa182ff07, BTTV_BOARD_IVC120, "IVC-120G" },
246 { 0xa182ff08, BTTV_BOARD_IVC120, "IVC-120G" },
247 { 0xa182ff09, BTTV_BOARD_IVC120, "IVC-120G" },
248 { 0xa182ff0a, BTTV_BOARD_IVC120, "IVC-120G" },
249 { 0xa182ff0b, BTTV_BOARD_IVC120, "IVC-120G" },
250 { 0xa182ff0c, BTTV_BOARD_IVC120, "IVC-120G" },
251 { 0xa182ff0d, BTTV_BOARD_IVC120, "IVC-120G" },
252 { 0xa182ff0e, BTTV_BOARD_IVC120, "IVC-120G" },
253 { 0xa182ff0f, BTTV_BOARD_IVC120, "IVC-120G" },
254 { 0xf0500000, BTTV_BOARD_IVCE8784, "IVCE-8784" },
255 { 0xf0500001, BTTV_BOARD_IVCE8784, "IVCE-8784" },
256 { 0xf0500002, BTTV_BOARD_IVCE8784, "IVCE-8784" },
257 { 0xf0500003, BTTV_BOARD_IVCE8784, "IVCE-8784" },
259 { 0x41424344, BTTV_BOARD_GRANDTEC, "GrandTec Multi Capture" },
260 { 0x01020304, BTTV_BOARD_XGUARD, "Grandtec Grand X-Guard" },
262 { 0x18501851, BTTV_BOARD_CHRONOS_VS2, "FlyVideo 98 (LR50)/ Chronos Video Shuttle II" },
263 { 0xa0501851, BTTV_BOARD_CHRONOS_VS2, "FlyVideo 98 (LR50)/ Chronos Video Shuttle II" },
264 { 0x18511851, BTTV_BOARD_FLYVIDEO98EZ, "FlyVideo 98EZ (LR51)/ CyberMail AV" },
265 { 0x18521852, BTTV_BOARD_TYPHOON_TVIEW, "FlyVideo 98FM (LR50)/ Typhoon TView TV/FM Tuner" },
266 { 0x41a0a051, BTTV_BOARD_FLYVIDEO_98FM, "Lifeview FlyVideo 98 LR50 Rev Q" },
267 { 0x18501f7f, BTTV_BOARD_FLYVIDEO_98, "Lifeview Flyvideo 98" },
269 { 0x010115cb, BTTV_BOARD_GMV1, "AG GMV1" },
270 { 0x010114c7, BTTV_BOARD_MODTEC_205, "Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV" },
272 { 0x10b42636, BTTV_BOARD_HAUPPAUGE878, "STB ???" },
273 { 0x217d6606, BTTV_BOARD_WINFAST2000, "Leadtek WinFast TV 2000" },
274 { 0xfff6f6ff, BTTV_BOARD_WINFAST2000, "Leadtek WinFast TV 2000" },
275 { 0x03116000, BTTV_BOARD_SENSORAY311, "Sensoray 311" },
276 { 0x00790e11, BTTV_BOARD_WINDVR, "Canopus WinDVR PCI" },
277 { 0xa0fca1a0, BTTV_BOARD_ZOLTRIX, "Face to Face Tvmax" },
278 { 0x82b2aa6a, BTTV_BOARD_SIMUS_GVC1100, "SIMUS GVC1100" },
279 { 0x146caa0c, BTTV_BOARD_PV951, "ituner spectra8" },
280 { 0x200a1295, BTTV_BOARD_PXC200, "ImageNation PXC200A" },
282 { 0x40111554, BTTV_BOARD_PV_BT878P_9B, "Prolink Pixelview PV-BT" },
283 { 0x17de0a01, BTTV_BOARD_KWORLD, "Mecer TV/FM/Video Tuner" },
285 { 0x01051805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #1" },
286 { 0x01061805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #2" },
287 { 0x01071805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #3" },
288 { 0x01081805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #4" },
290 { 0x15409511, BTTV_BOARD_ACORP_Y878F, "Acorp Y878F" },
292 { 0x53534149, BTTV_BOARD_SSAI_SECURITY, "SSAI Security Video Interface" },
293 { 0x5353414a, BTTV_BOARD_SSAI_ULTRASOUND, "SSAI Ultrasound Video Interface" },
295 /* likely broken, vendor id doesn't match the other magic views ...
296 * { 0xa0fca04f, BTTV_BOARD_MAGICTVIEW063, "Guillemot Maxi TV Video 3" }, */
298 /* Duplicate PCI ID, reconfigure for this board during the eeprom read.
299 * { 0x13eb0070, BTTV_BOARD_HAUPPAUGE_IMPACTVCB, "Hauppauge ImpactVCB" }, */
301 { 0x109e036e, BTTV_BOARD_CONCEPTRONIC_CTVFMI2, "Conceptronic CTVFMi v2"},
303 /* DVB cards (using pci function .1 for mpeg data xfer) */
304 { 0x001c11bd, BTTV_BOARD_PINNACLESAT, "Pinnacle PCTV Sat" },
305 { 0x01010071, BTTV_BOARD_NEBULA_DIGITV, "Nebula Electronics DigiTV" },
306 { 0x20007063, BTTV_BOARD_PC_HDTV, "pcHDTV HD-2000 TV"},
307 { 0x002611bd, BTTV_BOARD_TWINHAN_DST, "Pinnacle PCTV SAT CI" },
308 { 0x00011822, BTTV_BOARD_TWINHAN_DST, "Twinhan VisionPlus DVB" },
309 { 0xfc00270f, BTTV_BOARD_TWINHAN_DST, "ChainTech digitop DST-1000 DVB-S" },
310 { 0x07711461, BTTV_BOARD_AVDVBT_771, "AVermedia AverTV DVB-T 771" },
311 { 0x07611461, BTTV_BOARD_AVDVBT_761, "AverMedia AverTV DVB-T 761" },
312 { 0xdb1018ac, BTTV_BOARD_DVICO_DVBT_LITE, "DViCO FusionHDTV DVB-T Lite" },
313 { 0xdb1118ac, BTTV_BOARD_DVICO_DVBT_LITE, "Ultraview DVB-T Lite" },
314 { 0xd50018ac, BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE, "DViCO FusionHDTV 5 Lite" },
315 { 0x00261822, BTTV_BOARD_TWINHAN_DST, "DNTV Live! Mini "},
316 { 0xd200dbc0, BTTV_BOARD_DVICO_FUSIONHDTV_2, "DViCO FusionHDTV 2" },
317 { 0x763c008a, BTTV_BOARD_GEOVISION_GV600, "GeoVision GV-600" },
318 { 0x18011000, BTTV_BOARD_ENLTV_FM_2, "Encore ENL TV-FM-2" },
319 { 0x763d800a, BTTV_BOARD_GEOVISION_GV800S, "GeoVision GV-800(S) (master)" },
320 { 0x763d800b, BTTV_BOARD_GEOVISION_GV800S_SL, "GeoVision GV-800(S) (slave)" },
321 { 0x763d800c, BTTV_BOARD_GEOVISION_GV800S_SL, "GeoVision GV-800(S) (slave)" },
322 { 0x763d800d, BTTV_BOARD_GEOVISION_GV800S_SL, "GeoVision GV-800(S) (slave)" },
326 /* ----------------------------------------------------------------------- */
327 /* array with description for bt848 / bt878 tv/grabber cards */
329 struct tvcard bttv_tvcards[] = {
330 /* ---- card 0x00 ---------------------------------- */
331 [BTTV_BOARD_UNKNOWN] = {
332 .name = " *** UNKNOWN/GENERIC *** ",
335 .muxsel = MUXSEL(2, 3, 1, 0),
337 .tuner_addr = ADDR_UNSET,
339 [BTTV_BOARD_MIRO] = {
342 /* .audio_inputs= 1, */
345 .muxsel = MUXSEL(2, 3, 1, 1),
346 .gpiomux = { 2, 0, 0, 0 },
350 .tuner_addr = ADDR_UNSET,
352 [BTTV_BOARD_HAUPPAUGE] = {
353 .name = "Hauppauge (bt848)",
355 /* .audio_inputs= 1, */
358 .muxsel = MUXSEL(2, 3, 1, 1),
359 .gpiomux = { 0, 1, 2, 3 },
363 .tuner_addr = ADDR_UNSET,
366 .name = "STB, Gateway P/N 6000699 (bt848)",
368 /* .audio_inputs= 1, */
371 .muxsel = MUXSEL(2, 3, 1, 1),
372 .gpiomux = { 4, 0, 2, 3 },
376 .tuner_type = TUNER_PHILIPS_NTSC,
377 .tuner_addr = ADDR_UNSET,
382 /* ---- card 0x04 ---------------------------------- */
383 [BTTV_BOARD_INTEL] = {
384 .name = "Intel Create and Share PCI/ Smart Video Recorder III",
386 /* .audio_inputs= 0, */
389 .muxsel = MUXSEL(2, 3, 1, 1),
392 .tuner_type = TUNER_ABSENT,
393 .tuner_addr = ADDR_UNSET,
395 [BTTV_BOARD_DIAMOND] = {
396 .name = "Diamond DTV2000",
398 /* .audio_inputs= 1, */
401 .muxsel = MUXSEL(2, 3, 1, 0),
402 .gpiomux = { 0, 1, 0, 1 },
406 .tuner_addr = ADDR_UNSET,
408 [BTTV_BOARD_AVERMEDIA] = {
409 .name = "AVerMedia TVPhone",
411 /* .audio_inputs= 1, */
413 .muxsel = MUXSEL(2, 3, 1, 1),
415 .gpiomux = { 0x0c, 0x04, 0x08, 0x04 },
416 /* 0x04 for some cards ?? */
419 .tuner_addr = ADDR_UNSET,
420 .audio_mode_gpio= avermedia_tvphone_audio,
423 [BTTV_BOARD_MATRIX_VISION] = {
424 .name = "MATRIX-Vision MV-Delta",
426 /* .audio_inputs= 1, */
429 .muxsel = MUXSEL(2, 3, 1, 0, 0),
432 .tuner_type = TUNER_ABSENT,
433 .tuner_addr = ADDR_UNSET,
436 /* ---- card 0x08 ---------------------------------- */
437 [BTTV_BOARD_FLYVIDEO] = {
438 .name = "Lifeview FlyVideo II (Bt848) LR26 / MAXI TV Video PCI2 LR26",
440 /* .audio_inputs= 1, */
443 .muxsel = MUXSEL(2, 3, 1, 1),
444 .gpiomux = { 0, 0xc00, 0x800, 0x400 },
449 .tuner_addr = ADDR_UNSET,
451 [BTTV_BOARD_TURBOTV] = {
452 .name = "IMS/IXmicro TurboTV",
454 /* .audio_inputs= 1, */
457 .muxsel = MUXSEL(2, 3, 1, 1),
458 .gpiomux = { 1, 1, 2, 3 },
461 .tuner_type = TUNER_TEMIC_PAL,
462 .tuner_addr = ADDR_UNSET,
464 [BTTV_BOARD_HAUPPAUGE878] = {
465 .name = "Hauppauge (bt878)",
467 /* .audio_inputs= 1, */
469 .gpiomask = 0x0f, /* old: 7 */
470 .muxsel = MUXSEL(2, 0, 1, 1),
471 .gpiomux = { 0, 1, 2, 3 },
476 .tuner_addr = ADDR_UNSET,
478 [BTTV_BOARD_MIROPRO] = {
479 .name = "MIRO PCTV pro",
481 /* .audio_inputs= 1, */
484 .muxsel = MUXSEL(2, 3, 1, 1),
485 .gpiomux = { 0x20001,0x10001, 0, 0 },
489 .tuner_addr = ADDR_UNSET,
492 /* ---- card 0x0c ---------------------------------- */
493 [BTTV_BOARD_ADSTECH_TV] = {
494 .name = "ADS Technologies Channel Surfer TV (bt848)",
496 /* .audio_inputs= 1, */
499 .muxsel = MUXSEL(2, 3, 1, 1),
500 .gpiomux = { 13, 14, 11, 7 },
503 .tuner_addr = ADDR_UNSET,
505 [BTTV_BOARD_AVERMEDIA98] = {
506 .name = "AVerMedia TVCapture 98",
508 /* .audio_inputs= 4, */
511 .muxsel = MUXSEL(2, 3, 1, 1),
512 .gpiomux = { 13, 14, 11, 7 },
516 .tuner_type = TUNER_PHILIPS_PAL,
517 .tuner_addr = ADDR_UNSET,
518 .audio_mode_gpio= avermedia_tv_stereo_audio,
522 .name = "Aimslab Video Highway Xtreme (VHX)",
524 /* .audio_inputs= 1, */
527 .muxsel = MUXSEL(2, 3, 1, 1),
528 .gpiomux = { 0, 2, 1, 3 }, /* old: {0, 1, 2, 3, 4} */
533 .tuner_addr = ADDR_UNSET,
535 [BTTV_BOARD_ZOLTRIX] = {
536 .name = "Zoltrix TV-Max",
538 /* .audio_inputs= 1, */
541 .muxsel = MUXSEL(2, 3, 1, 1),
542 .gpiomux = { 0, 0, 1, 0 },
546 .tuner_addr = ADDR_UNSET,
549 /* ---- card 0x10 ---------------------------------- */
550 [BTTV_BOARD_PIXVIEWPLAYTV] = {
551 .name = "Prolink Pixelview PlayTV (bt878)",
553 /* .audio_inputs= 1, */
555 .gpiomask = 0x01fe00,
556 .muxsel = MUXSEL(2, 3, 1, 1),
557 /* 2003-10-20 by "Anton A. Arapov" <arapov@mail.ru> */
558 .gpiomux = { 0x001e00, 0, 0x018000, 0x014000 },
559 .gpiomute = 0x002000,
563 .tuner_addr = ADDR_UNSET,
565 [BTTV_BOARD_WINVIEW_601] = {
566 .name = "Leadtek WinView 601",
568 /* .audio_inputs= 1, */
570 .gpiomask = 0x8300f8,
571 .muxsel = MUXSEL(2, 3, 1, 1, 0),
572 .gpiomux = { 0x4fa007,0xcfa007,0xcfa007,0xcfa007 },
573 .gpiomute = 0xcfa007,
576 .tuner_addr = ADDR_UNSET,
577 .volume_gpio = winview_volume,
580 [BTTV_BOARD_AVEC_INTERCAP] = {
581 .name = "AVEC Intercapture",
583 /* .audio_inputs= 2, */
586 .muxsel = MUXSEL(2, 3, 1, 1),
587 .gpiomux = { 1, 0, 0, 0 },
590 .tuner_addr = ADDR_UNSET,
592 [BTTV_BOARD_LIFE_FLYKIT] = {
593 .name = "Lifeview FlyVideo II EZ /FlyKit LR38 Bt848 (capture only)",
595 /* .audio_inputs= 1, */
597 .gpiomask = 0x8dff00,
598 .muxsel = MUXSEL(2, 3, 1, 1),
601 .tuner_type = TUNER_ABSENT,
602 .tuner_addr = ADDR_UNSET,
605 /* ---- card 0x14 ---------------------------------- */
606 [BTTV_BOARD_CEI_RAFFLES] = {
607 .name = "CEI Raffles Card",
609 /* .audio_inputs= 3, */
611 .muxsel = MUXSEL(2, 3, 1, 1),
613 .tuner_addr = ADDR_UNSET,
615 [BTTV_BOARD_CONFERENCETV] = {
616 .name = "Lifeview FlyVideo 98/ Lucky Star Image World ConferenceTV LR50",
618 /* .audio_inputs= 2, tuner, line in */
621 .muxsel = MUXSEL(2, 3, 1, 1),
622 .gpiomux = { 0, 0x800, 0x1000, 0x1000 },
625 .tuner_type = TUNER_PHILIPS_PAL_I,
626 .tuner_addr = ADDR_UNSET,
628 [BTTV_BOARD_PHOEBE_TVMAS] = {
629 .name = "Askey CPH050/ Phoebe Tv Master + FM",
631 /* .audio_inputs= 1, */
634 .muxsel = MUXSEL(2, 3, 1, 1),
635 .gpiomux = { 0, 1, 0x800, 0x400 },
640 .tuner_addr = ADDR_UNSET,
642 [BTTV_BOARD_MODTEC_205] = {
643 .name = "Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV, bt878",
645 /* .audio_inputs= 1, */
649 .muxsel = MUXSEL(2, 3, 0), /* input 2 is digital */
650 /* .digital_mode= DIGITAL_MODE_CAMERA, */
651 .gpiomux = { 0, 0, 0, 0 },
654 .tuner_type = TUNER_ALPS_TSBB5_PAL_I,
655 .tuner_addr = ADDR_UNSET,
658 /* ---- card 0x18 ---------------------------------- */
659 [BTTV_BOARD_MAGICTVIEW061] = {
660 .name = "Askey CPH05X/06X (bt878) [many vendors]",
662 /* .audio_inputs= 1, */
665 .muxsel = MUXSEL(2, 3, 1, 1),
666 .gpiomux = {0x400, 0x400, 0x400, 0x400 },
671 .tuner_addr = ADDR_UNSET,
674 [BTTV_BOARD_VOBIS_BOOSTAR] = {
675 .name = "Terratec TerraTV+ Version 1.0 (Bt848)/ Terra TValue Version 1.0/ Vobis TV-Boostar",
677 /* .audio_inputs= 1, */
679 .gpiomask = 0x1f0fff,
680 .muxsel = MUXSEL(2, 3, 1, 1),
681 .gpiomux = { 0x20000, 0x30000, 0x10000, 0 },
684 .tuner_type = TUNER_PHILIPS_PAL,
685 .tuner_addr = ADDR_UNSET,
686 .audio_mode_gpio= terratv_audio,
688 [BTTV_BOARD_HAUPPAUG_WCAM] = {
689 .name = "Hauppauge WinCam newer (bt878)",
691 /* .audio_inputs= 1, */
694 .muxsel = MUXSEL(2, 0, 1, 1),
695 .gpiomux = { 0, 1, 2, 3 },
699 .tuner_addr = ADDR_UNSET,
701 [BTTV_BOARD_MAXI] = {
702 .name = "Lifeview FlyVideo 98/ MAXI TV Video PCI2 LR50",
704 /* .audio_inputs= 2, */
707 .muxsel = MUXSEL(2, 3, 1, 1),
708 .gpiomux = { 0, 0x800, 0x1000, 0x1000 },
711 .tuner_type = TUNER_PHILIPS_SECAM,
712 .tuner_addr = ADDR_UNSET,
715 /* ---- card 0x1c ---------------------------------- */
716 [BTTV_BOARD_TERRATV] = {
717 .name = "Terratec TerraTV+ Version 1.1 (bt878)",
719 /* .audio_inputs= 1, */
721 .gpiomask = 0x1f0fff,
722 .muxsel = MUXSEL(2, 3, 1, 1),
723 .gpiomux = { 0x20000, 0x30000, 0x10000, 0x00000 },
726 .tuner_type = TUNER_PHILIPS_PAL,
727 .tuner_addr = ADDR_UNSET,
728 .audio_mode_gpio= terratv_audio,
730 External 20 pin connector (for Active Radio Upgrade board)
736 gpio05: om5610-stereo
740 gpio09+10: nIOR, nSEL ?? (bt878)
744 gpio16: u2-A0 (1st 4052bt)
747 gpio19: u4-A0 (2nd 4052)
751 00000 : Cdrom (internal audio input)
752 10000 : ext. Video audio input
761 [BTTV_BOARD_PXC200] = {
762 /* Jannik Fritsch <jannik@techfak.uni-bielefeld.de> */
763 .name = "Imagenation PXC200",
765 /* .audio_inputs= 1, */
766 .svhs = 1, /* was: 4 */
768 .muxsel = MUXSEL(2, 3, 1, 0, 0),
771 .tuner_type = TUNER_ABSENT,
772 .tuner_addr = ADDR_UNSET,
773 .muxsel_hook = PXC200_muxsel,
776 [BTTV_BOARD_FLYVIDEO_98] = {
777 .name = "Lifeview FlyVideo 98 LR50",
779 /* .audio_inputs= 1, */
781 .gpiomask = 0x1800, /* 0x8dfe00 */
782 .muxsel = MUXSEL(2, 3, 1, 1),
783 .gpiomux = { 0, 0x0800, 0x1000, 0x1000 },
787 .tuner_addr = ADDR_UNSET,
789 [BTTV_BOARD_IPROTV] = {
790 .name = "Formac iProTV, Formac ProTV I (bt848)",
792 /* .audio_inputs= 1, */
795 .muxsel = MUXSEL(2, 3, 1, 1),
796 .gpiomux = { 1, 0, 0, 0 },
798 .tuner_type = TUNER_PHILIPS_PAL,
799 .tuner_addr = ADDR_UNSET,
802 /* ---- card 0x20 ---------------------------------- */
803 [BTTV_BOARD_INTEL_C_S_PCI] = {
804 .name = "Intel Create and Share PCI/ Smart Video Recorder III",
806 /* .audio_inputs= 0, */
809 .muxsel = MUXSEL(2, 3, 1, 1),
812 .tuner_type = TUNER_ABSENT,
813 .tuner_addr = ADDR_UNSET,
815 [BTTV_BOARD_TERRATVALUE] = {
816 .name = "Terratec TerraTValue Version Bt878",
818 /* .audio_inputs= 1, */
820 .gpiomask = 0xffff00,
821 .muxsel = MUXSEL(2, 3, 1, 1),
822 .gpiomux = { 0x500, 0, 0x300, 0x900 },
826 .tuner_type = TUNER_PHILIPS_PAL,
827 .tuner_addr = ADDR_UNSET,
829 [BTTV_BOARD_WINFAST2000] = {
830 .name = "Leadtek WinFast 2000/ WinFast 2000 XP",
832 /* .audio_inputs= 1, */
834 /* TV, CVid, SVid, CVid over SVid connector */
835 .muxsel = MUXSEL(2, 3, 1, 1, 0),
836 /* Alexander Varakin <avarakin@hotmail.com> [stereo version] */
837 .gpiomask = 0xb33000,
838 .gpiomux = { 0x122000,0x1000,0x0000,0x620000 },
839 .gpiomute = 0x800000,
840 /* Audio Routing for "WinFast 2000 XP" (no tv stereo !)
841 gpio23 -- hef4052:nEnable (0x800000)
844 0x0000: external audio
848 Note: There exists another variant "Winfast 2000" with tv stereo !?
849 Note: eeprom only contains FF and pci subsystem id 107d:6606
854 .tuner_type = TUNER_PHILIPS_PAL, /* default for now, gpio reads BFFF06 for Pal bg+dk */
855 .tuner_addr = ADDR_UNSET,
856 .audio_mode_gpio= winfast2000_audio,
859 [BTTV_BOARD_CHRONOS_VS2] = {
860 .name = "Lifeview FlyVideo 98 LR50 / Chronos Video Shuttle II",
862 /* .audio_inputs= 3, */
865 .muxsel = MUXSEL(2, 3, 1, 1),
866 .gpiomux = { 0, 0x800, 0x1000, 0x1000 },
870 .tuner_addr = ADDR_UNSET,
873 /* ---- card 0x24 ---------------------------------- */
874 [BTTV_BOARD_TYPHOON_TVIEW] = {
875 .name = "Lifeview FlyVideo 98FM LR50 / Typhoon TView TV/FM Tuner",
877 /* .audio_inputs= 3, */
880 .muxsel = MUXSEL(2, 3, 1, 1),
881 .gpiomux = { 0, 0x800, 0x1000, 0x1000 },
885 .tuner_addr = ADDR_UNSET,
888 [BTTV_BOARD_PXELVWPLTVPRO] = {
889 .name = "Prolink PixelView PlayTV pro",
891 /* .audio_inputs= 1, */
894 .muxsel = MUXSEL(2, 3, 1, 1),
895 .gpiomux = { 0x21, 0x20, 0x24, 0x2c },
900 .tuner_addr = ADDR_UNSET,
902 [BTTV_BOARD_MAGICTVIEW063] = {
903 .name = "Askey CPH06X TView99",
905 /* .audio_inputs= 1, */
907 .gpiomask = 0x551e00,
908 .muxsel = MUXSEL(2, 3, 1, 0),
909 .gpiomux = { 0x551400, 0x551200, 0, 0 },
910 .gpiomute = 0x551c00,
913 .tuner_type = TUNER_PHILIPS_PAL_I,
914 .tuner_addr = ADDR_UNSET,
917 [BTTV_BOARD_PINNACLE] = {
918 .name = "Pinnacle PCTV Studio/Rave",
920 /* .audio_inputs= 1, */
922 .gpiomask = 0x03000F,
923 .muxsel = MUXSEL(2, 3, 1, 1),
924 .gpiomux = { 2, 0xd0001, 0, 0 },
929 .tuner_addr = ADDR_UNSET,
932 /* ---- card 0x28 ---------------------------------- */
933 [BTTV_BOARD_STB2] = {
934 .name = "STB TV PCI FM, Gateway P/N 6000704 (bt878), 3Dfx VoodooTV 100",
936 /* .audio_inputs= 1, */
939 .muxsel = MUXSEL(2, 3, 1, 1),
940 .gpiomux = { 4, 0, 2, 3 },
944 .tuner_type = TUNER_PHILIPS_NTSC,
945 .tuner_addr = ADDR_UNSET,
949 [BTTV_BOARD_AVPHONE98] = {
950 .name = "AVerMedia TVPhone 98",
952 /* .audio_inputs= 4, */
955 .muxsel = MUXSEL(2, 3, 1, 1),
956 .gpiomux = { 13, 4, 11, 7 },
960 .tuner_addr = ADDR_UNSET,
962 .audio_mode_gpio= avermedia_tvphone_audio,
964 [BTTV_BOARD_PV951] = {
965 .name = "ProVideo PV951", /* pic16c54 */
967 /* .audio_inputs= 1, */
970 .muxsel = MUXSEL(2, 3, 1, 1),
971 .gpiomux = { 0, 0, 0, 0},
975 .tuner_type = TUNER_PHILIPS_PAL_I,
976 .tuner_addr = ADDR_UNSET,
978 [BTTV_BOARD_ONAIR_TV] = {
979 .name = "Little OnAir TV",
981 /* .audio_inputs= 1, */
984 .muxsel = MUXSEL(2, 3, 1, 1),
985 .gpiomux = { 0xff9ff6, 0xff9ff6, 0xff1ff7, 0 },
986 .gpiomute = 0xff3ffc,
989 .tuner_addr = ADDR_UNSET,
992 /* ---- card 0x2c ---------------------------------- */
993 [BTTV_BOARD_SIGMA_TVII_FM] = {
994 .name = "Sigma TVII-FM",
996 /* .audio_inputs= 1, */
999 .muxsel = MUXSEL(2, 3, 1, 1),
1000 .gpiomux = { 1, 1, 0, 2 },
1004 .tuner_type = UNSET,
1005 .tuner_addr = ADDR_UNSET,
1007 [BTTV_BOARD_MATRIX_VISION2] = {
1008 .name = "MATRIX-Vision MV-Delta 2",
1010 /* .audio_inputs= 1, */
1013 .muxsel = MUXSEL(2, 3, 1, 0, 0),
1017 .tuner_type = TUNER_ABSENT,
1018 .tuner_addr = ADDR_UNSET,
1020 [BTTV_BOARD_ZOLTRIX_GENIE] = {
1021 .name = "Zoltrix Genie TV/FM",
1023 /* .audio_inputs= 1, */
1025 .gpiomask = 0xbcf03f,
1026 .muxsel = MUXSEL(2, 3, 1, 1),
1027 .gpiomux = { 0xbc803f, 0xbc903f, 0xbcb03f, 0 },
1028 .gpiomute = 0xbcb03f,
1031 .tuner_type = TUNER_TEMIC_4039FR5_NTSC,
1032 .tuner_addr = ADDR_UNSET,
1034 [BTTV_BOARD_TERRATVRADIO] = {
1035 .name = "Terratec TV/Radio+",
1037 /* .audio_inputs= 1, */
1039 .gpiomask = 0x70000,
1040 .muxsel = MUXSEL(2, 3, 1, 1),
1041 .gpiomux = { 0x20000, 0x30000, 0x10000, 0 },
1042 .gpiomute = 0x40000,
1046 .tuner_type = TUNER_PHILIPS_PAL_I,
1047 .tuner_addr = ADDR_UNSET,
1051 /* ---- card 0x30 ---------------------------------- */
1052 [BTTV_BOARD_DYNALINK] = {
1053 .name = "Askey CPH03x/ Dynalink Magic TView",
1055 /* .audio_inputs= 1, */
1058 .muxsel = MUXSEL(2, 3, 1, 1),
1059 .gpiomux = {2,0,0,0 },
1063 .tuner_type = UNSET,
1064 .tuner_addr = ADDR_UNSET,
1066 [BTTV_BOARD_GVBCTV3PCI] = {
1067 .name = "IODATA GV-BCTV3/PCI",
1069 /* .audio_inputs= 1, */
1071 .gpiomask = 0x010f00,
1072 .muxsel = MUXSEL(2, 3, 0, 0),
1073 .gpiomux = {0x10000, 0, 0x10000, 0 },
1076 .tuner_type = TUNER_ALPS_TSHC6_NTSC,
1077 .tuner_addr = ADDR_UNSET,
1078 .audio_mode_gpio= gvbctv3pci_audio,
1080 [BTTV_BOARD_PXELVWPLTVPAK] = {
1081 .name = "Prolink PV-BT878P+4E / PixelView PlayTV PAK / Lenco MXTV-9578 CP",
1083 /* .audio_inputs= 1, */
1086 .gpiomask = 0xAA0000,
1087 .muxsel = MUXSEL(2, 3, 1, 1, 0), /* in 4 is digital */
1088 /* .digital_mode= DIGITAL_MODE_CAMERA, */
1089 .gpiomux = { 0x20000, 0, 0x80000, 0x80000 },
1090 .gpiomute = 0xa8000,
1093 .tuner_type = TUNER_PHILIPS_PAL_I,
1094 .tuner_addr = ADDR_UNSET,
1096 /* GPIO wiring: (different from Rev.4C !)
1097 GPIO17: U4.A0 (first hef4052bt)
1099 GPIO20: U5.A1 (second hef4052bt)
1101 GPIO22: BT832 Reset Line
1102 GPIO23: A5,A0, U5,nEN
1103 Note: At i2c=0x8a is a Bt832 chip, which changes to 0x88 after being reset via GPIO22
1106 [BTTV_BOARD_EAGLE] = {
1107 .name = "Eagle Wireless Capricorn2 (bt878A)",
1109 /* .audio_inputs= 1, */
1112 .muxsel = MUXSEL(2, 0, 1, 1),
1113 .gpiomux = { 0, 1, 2, 3 },
1116 .tuner_type = UNSET /* TUNER_ALPS_TMDH2_NTSC */,
1117 .tuner_addr = ADDR_UNSET,
1120 /* ---- card 0x34 ---------------------------------- */
1121 [BTTV_BOARD_PINNACLEPRO] = {
1122 /* David Härdeman <david@2gen.com> */
1123 .name = "Pinnacle PCTV Studio Pro",
1125 /* .audio_inputs= 1, */
1127 .gpiomask = 0x03000F,
1128 .muxsel = MUXSEL(2, 3, 1, 1),
1129 .gpiomux = { 1, 0xd0001, 0, 0 },
1131 /* sound path (5 sources):
1132 MUX1 (mask 0x03), Enable Pin 0x08 (0=enable, 1=disable)
1135 2= Mono TV sound from Tuner
1137 MUX2 (mask 0x30000):
1139 1= FM stereo Radio from Tuner */
1142 .tuner_type = UNSET,
1143 .tuner_addr = ADDR_UNSET,
1145 [BTTV_BOARD_TVIEW_RDS_FM] = {
1146 /* Claas Langbehn <claas@bigfoot.com>,
1147 Sven Grothklags <sven@upb.de> */
1148 .name = "Typhoon TView RDS + FM Stereo / KNC1 TV Station RDS",
1150 /* .audio_inputs= 3, */
1153 .muxsel = MUXSEL(2, 3, 1, 1),
1154 .gpiomux = { 0, 0, 0x10, 8 },
1158 .tuner_type = TUNER_PHILIPS_PAL,
1159 .tuner_addr = ADDR_UNSET,
1162 [BTTV_BOARD_LIFETEC_9415] = {
1163 /* Tim Röstermundt <rosterm@uni-muenster.de>
1164 in de.comp.os.unix.linux.hardware:
1165 options bttv card=0 pll=1 radio=1 gpiomask=0x18e0
1166 gpiomux =0x44c71f,0x44d71f,0,0x44d71f,0x44dfff
1167 options tuner type=5 */
1168 .name = "Lifeview FlyVideo 2000 /FlyVideo A2/ Lifetec LT 9415 TV [LR90]",
1170 /* .audio_inputs= 1, */
1173 .muxsel = MUXSEL(2, 3, 1, 1),
1174 .gpiomux = { 0x0000,0x0800,0x1000,0x1000 },
1176 /* For cards with tda9820/tda9821:
1177 0x0000: Tuner normal stereo
1178 0x0080: Tuner A2 SAP (second audio program = Zweikanalton)
1179 0x0880: Tuner A2 stereo */
1181 .tuner_type = UNSET,
1182 .tuner_addr = ADDR_UNSET,
1184 [BTTV_BOARD_BESTBUY_EASYTV] = {
1185 /* Miguel Angel Alvarez <maacruz@navegalia.com>
1186 old Easy TV BT848 version (model CPH031) */
1187 .name = "Askey CPH031/ BESTBUY Easy TV",
1189 /* .audio_inputs= 1, */
1192 .muxsel = MUXSEL(2, 3, 1, 0),
1193 .gpiomux = { 2, 0, 0, 0 },
1197 .tuner_type = TUNER_TEMIC_PAL,
1198 .tuner_addr = ADDR_UNSET,
1201 /* ---- card 0x38 ---------------------------------- */
1202 [BTTV_BOARD_FLYVIDEO_98FM] = {
1203 /* Gordon Heydon <gjheydon@bigfoot.com ('98) */
1204 .name = "Lifeview FlyVideo 98FM LR50",
1206 /* .audio_inputs= 3, */
1209 .muxsel = MUXSEL(2, 3, 1, 1),
1210 .gpiomux = { 0, 0x800, 0x1000, 0x1000 },
1213 .tuner_type = TUNER_PHILIPS_PAL,
1214 .tuner_addr = ADDR_UNSET,
1216 /* This is the ultimate cheapo capture card
1217 * just a BT848A on a small PCB!
1218 * Steve Hosgood <steve@equiinet.com> */
1219 [BTTV_BOARD_GRANDTEC] = {
1220 .name = "GrandTec 'Grand Video Capture' (Bt848)",
1222 /* .audio_inputs= 0, */
1225 .muxsel = MUXSEL(3, 1),
1230 .tuner_type = TUNER_ABSENT,
1231 .tuner_addr = ADDR_UNSET,
1233 [BTTV_BOARD_ASKEY_CPH060] = {
1234 /* Daniel Herrington <daniel.herrington@home.com> */
1235 .name = "Askey CPH060/ Phoebe TV Master Only (No FM)",
1237 /* .audio_inputs= 1, */
1240 .muxsel = MUXSEL(2, 3, 1, 1),
1241 .gpiomux = { 0x400, 0x400, 0x400, 0x400 },
1245 .tuner_type = TUNER_TEMIC_4036FY5_NTSC,
1246 .tuner_addr = ADDR_UNSET,
1248 [BTTV_BOARD_ASKEY_CPH03X] = {
1249 /* Matti Mottus <mottus@physic.ut.ee> */
1250 .name = "Askey CPH03x TV Capturer",
1252 /* .audio_inputs= 1, */
1254 .gpiomask = 0x03000F,
1255 .muxsel = MUXSEL(2, 3, 1, 0),
1256 .gpiomux = { 2, 0, 0, 0 },
1259 .tuner_type = TUNER_TEMIC_PAL,
1260 .tuner_addr = ADDR_UNSET,
1263 /* ---- card 0x3c ---------------------------------- */
1264 [BTTV_BOARD_MM100PCTV] = {
1265 /* Philip Blundell <philb@gnu.org> */
1266 .name = "Modular Technology MM100PCTV",
1268 /* .audio_inputs= 2, */
1271 .muxsel = MUXSEL(2, 3, 1, 1),
1272 .gpiomux = { 2, 0, 0, 1 },
1275 .tuner_type = TUNER_TEMIC_PAL,
1276 .tuner_addr = ADDR_UNSET,
1278 [BTTV_BOARD_GMV1] = {
1279 /* Adrian Cox <adrian@humboldt.co.uk */
1280 .name = "AG Electronics GMV1",
1282 /* .audio_inputs= 0, */
1285 .muxsel = MUXSEL(2, 2),
1290 .tuner_type = TUNER_ABSENT,
1291 .tuner_addr = ADDR_UNSET,
1293 [BTTV_BOARD_BESTBUY_EASYTV2] = {
1294 /* Miguel Angel Alvarez <maacruz@navegalia.com>
1295 new Easy TV BT878 version (model CPH061)
1296 special thanks to Informatica Mieres for providing the card */
1297 .name = "Askey CPH061/ BESTBUY Easy TV (bt878)",
1299 /* .audio_inputs= 2, */
1302 .muxsel = MUXSEL(2, 3, 1, 0),
1303 .gpiomux = { 1, 0, 4, 4 },
1307 .tuner_type = TUNER_PHILIPS_PAL,
1308 .tuner_addr = ADDR_UNSET,
1310 [BTTV_BOARD_ATI_TVWONDER] = {
1311 /* Lukas Gebauer <geby@volny.cz> */
1312 .name = "ATI TV-Wonder",
1314 /* .audio_inputs= 1, */
1317 .muxsel = MUXSEL(2, 3, 1, 0),
1318 .gpiomux = { 0xbffe, 0, 0xbfff, 0 },
1321 .tuner_type = TUNER_TEMIC_4006FN5_MULTI_PAL,
1322 .tuner_addr = ADDR_UNSET,
1325 /* ---- card 0x40 ---------------------------------- */
1326 [BTTV_BOARD_ATI_TVWONDERVE] = {
1327 /* Lukas Gebauer <geby@volny.cz> */
1328 .name = "ATI TV-Wonder VE",
1330 /* .audio_inputs= 1, */
1333 .muxsel = MUXSEL(2, 3, 0, 1),
1334 .gpiomux = { 0, 0, 1, 0 },
1337 .tuner_type = TUNER_TEMIC_4006FN5_MULTI_PAL,
1338 .tuner_addr = ADDR_UNSET,
1340 [BTTV_BOARD_FLYVIDEO2000] = {
1341 /* DeeJay <deejay@westel900.net (2000S) */
1342 .name = "Lifeview FlyVideo 2000S LR90",
1344 /* .audio_inputs= 3, */
1347 .muxsel = MUXSEL(2, 3, 0, 1),
1348 /* Radio changed from 1e80 to 0x800 to make
1349 FlyVideo2000S in .hu happy (gm)*/
1350 /* -dk-???: set mute=0x1800 for tda9874h daughterboard */
1351 .gpiomux = { 0x0000,0x0800,0x1000,0x1000 },
1353 .audio_mode_gpio= fv2000s_audio,
1358 .tuner_type = TUNER_PHILIPS_PAL,
1359 .tuner_addr = ADDR_UNSET,
1361 [BTTV_BOARD_TERRATVALUER] = {
1362 .name = "Terratec TValueRadio",
1364 /* .audio_inputs= 1, */
1366 .gpiomask = 0xffff00,
1367 .muxsel = MUXSEL(2, 3, 1, 1),
1368 .gpiomux = { 0x500, 0x500, 0x300, 0x900 },
1372 .tuner_type = TUNER_PHILIPS_PAL,
1373 .tuner_addr = ADDR_UNSET,
1376 [BTTV_BOARD_GVBCTV4PCI] = {
1377 /* TANAKA Kei <peg00625@nifty.com> */
1378 .name = "IODATA GV-BCTV4/PCI",
1380 /* .audio_inputs= 1, */
1382 .gpiomask = 0x010f00,
1383 .muxsel = MUXSEL(2, 3, 0, 0),
1384 .gpiomux = {0x10000, 0, 0x10000, 0 },
1387 .tuner_type = TUNER_SHARP_2U5JF5540_NTSC,
1388 .tuner_addr = ADDR_UNSET,
1389 .audio_mode_gpio= gvbctv3pci_audio,
1392 /* ---- card 0x44 ---------------------------------- */
1393 [BTTV_BOARD_VOODOOTV_FM] = {
1394 .name = "3Dfx VoodooTV FM (Euro)",
1395 /* try "insmod msp3400 simple=0" if you have
1396 * sound problems with this card. */
1398 /* .audio_inputs= 1, */
1400 .gpiomask = 0x4f8a00,
1401 /* 0x100000: 1=MSP enabled (0=disable again)
1402 * 0x010000: Connected to "S0" on tda9880 (0=Pal/BG, 1=NTSC) */
1403 .gpiomux = {0x947fff, 0x987fff,0x947fff,0x947fff },
1404 .gpiomute = 0x947fff,
1405 /* tvtuner, radio, external,internal, mute, stereo
1406 * tuner, Composit, SVid, Composit-on-Svid-adapter */
1407 .muxsel = MUXSEL(2, 3, 0, 1),
1408 .tuner_type = TUNER_MT2032,
1409 .tuner_addr = ADDR_UNSET,
1413 [BTTV_BOARD_VOODOOTV_200] = {
1414 .name = "VoodooTV 200 (USA)",
1415 /* try "insmod msp3400 simple=0" if you have
1416 * sound problems with this card. */
1418 /* .audio_inputs= 1, */
1420 .gpiomask = 0x4f8a00,
1421 /* 0x100000: 1=MSP enabled (0=disable again)
1422 * 0x010000: Connected to "S0" on tda9880 (0=Pal/BG, 1=NTSC) */
1423 .gpiomux = {0x947fff, 0x987fff,0x947fff,0x947fff },
1424 .gpiomute = 0x947fff,
1425 /* tvtuner, radio, external,internal, mute, stereo
1426 * tuner, Composit, SVid, Composit-on-Svid-adapter */
1427 .muxsel = MUXSEL(2, 3, 0, 1),
1428 .tuner_type = TUNER_MT2032,
1429 .tuner_addr = ADDR_UNSET,
1433 [BTTV_BOARD_AIMMS] = {
1434 /* Philip Blundell <pb@nexus.co.uk> */
1435 .name = "Active Imaging AIMMS",
1437 /* .audio_inputs= 0, */
1438 .tuner_type = TUNER_ABSENT,
1439 .tuner_addr = ADDR_UNSET,
1441 .muxsel = MUXSEL(2),
1444 [BTTV_BOARD_PV_BT878P_PLUS] = {
1445 /* Tomasz Pyra <hellfire@sedez.iq.pl> */
1446 .name = "Prolink Pixelview PV-BT878P+ (Rev.4C,8E)",
1448 /* .audio_inputs= 4, */
1451 .muxsel = MUXSEL(2, 3, 1, 1),
1452 .gpiomux = { 0, 0, 11, 7 }, /* TV and Radio with same GPIO ! */
1456 .tuner_type = TUNER_LG_PAL_I_FM,
1457 .tuner_addr = ADDR_UNSET,
1460 GPIO0: U4.A0 (hef4052bt)
1462 GPIO2: U4.A1 (second hef4052bt)
1463 GPIO3: U4.nEN, U5.A0, A5.nEN
1467 [BTTV_BOARD_FLYVIDEO98EZ] = {
1468 .name = "Lifeview FlyVideo 98EZ (capture only) LR51",
1470 /* .audio_inputs= 0, */
1472 /* AV1, AV2, SVHS, CVid adapter on SVHS */
1473 .muxsel = MUXSEL(2, 3, 1, 1),
1476 .tuner_type = TUNER_ABSENT,
1477 .tuner_addr = ADDR_UNSET,
1480 /* ---- card 0x48 ---------------------------------- */
1481 [BTTV_BOARD_PV_BT878P_9B] = {
1482 /* Dariusz Kowalewski <darekk@automex.pl> */
1483 .name = "Prolink Pixelview PV-BT878P+9B (PlayTV Pro rev.9B FM+NICAM)",
1485 /* .audio_inputs= 1, */
1488 .muxsel = MUXSEL(2, 3, 1, 1),
1489 .gpiomux = { 0x01, 0x00, 0x03, 0x03 },
1495 .tuner_type = TUNER_PHILIPS_PAL,
1496 .tuner_addr = ADDR_UNSET,
1497 .audio_mode_gpio= pvbt878p9b_audio, /* Note: not all cards have stereo */
1498 .has_radio = 1, /* Note: not all cards have radio */
1505 GPIO20,22,23: R30,R29,R28
1508 [BTTV_BOARD_SENSORAY311] = {
1509 /* Clay Kunz <ckunz@mail.arc.nasa.gov> */
1510 /* you must jumper JP5 for the card to work */
1511 .name = "Sensoray 311",
1513 /* .audio_inputs= 0, */
1516 .muxsel = MUXSEL(2, 3, 1, 0, 0),
1519 .tuner_type = TUNER_ABSENT,
1520 .tuner_addr = ADDR_UNSET,
1522 [BTTV_BOARD_RV605] = {
1523 /* Miguel Freitas <miguel@cetuc.puc-rio.br> */
1524 .name = "RemoteVision MX (RV605)",
1526 /* .audio_inputs= 0, */
1529 .gpiomask2 = 0x07ff,
1530 .muxsel = MUXSEL(3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3),
1533 .tuner_type = TUNER_ABSENT,
1534 .tuner_addr = ADDR_UNSET,
1535 .muxsel_hook = rv605_muxsel,
1537 [BTTV_BOARD_POWERCLR_MTV878] = {
1538 .name = "Powercolor MTV878/ MTV878R/ MTV878F",
1540 /* .audio_inputs= 2, */
1542 .gpiomask = 0x1C800F, /* Bit0-2: Audio select, 8-12:remote control 14:remote valid 15:remote reset */
1543 .muxsel = MUXSEL(2, 1, 1),
1544 .gpiomux = { 0, 1, 2, 2 },
1547 .tuner_type = TUNER_PHILIPS_PAL,
1548 .tuner_addr = ADDR_UNSET,
1553 /* ---- card 0x4c ---------------------------------- */
1554 [BTTV_BOARD_WINDVR] = {
1555 /* Masaki Suzuki <masaki@btree.org> */
1556 .name = "Canopus WinDVR PCI (COMPAQ Presario 3524JP, 5112JP)",
1558 /* .audio_inputs= 1, */
1560 .gpiomask = 0x140007,
1561 .muxsel = MUXSEL(2, 3, 1, 1),
1562 .gpiomux = { 0, 1, 2, 3 },
1564 .tuner_type = TUNER_PHILIPS_NTSC,
1565 .tuner_addr = ADDR_UNSET,
1566 .audio_mode_gpio= windvr_audio,
1568 [BTTV_BOARD_GRANDTEC_MULTI] = {
1569 .name = "GrandTec Multi Capture Card (Bt878)",
1571 /* .audio_inputs= 0, */
1574 .muxsel = MUXSEL(2, 3, 1, 0),
1579 .tuner_type = TUNER_ABSENT,
1580 .tuner_addr = ADDR_UNSET,
1582 [BTTV_BOARD_KWORLD] = {
1583 .name = "Jetway TV/Capture JW-TV878-FBK, Kworld KW-TV878RF",
1585 /* .audio_inputs= 3, */
1588 /* Tuner, SVid, SVHS, SVid to SVHS connector */
1589 .muxsel = MUXSEL(2, 3, 1, 1),
1590 .gpiomux = { 0, 0, 4, 4 },/* Yes, this tuner uses the same audio output for TV and FM radio!
1591 * This card lacks external Audio In, so we mute it on Ext. & Int.
1592 * The PCB can take a sbx1637/sbx1673, wiring unknown.
1593 * This card lacks PCI subsystem ID, sigh.
1594 * gpiomux =1: lower volume, 2+3: mute
1595 * btwincap uses 0x80000/0x80003
1601 .tuner_type = TUNER_PHILIPS_PAL,
1602 .tuner_addr = ADDR_UNSET,
1603 /* Samsung TCPA9095PC27A (BG+DK), philips compatible, w/FM, stereo and
1604 radio signal strength indicators work fine. */
1607 GPIO0,1: HEF4052 A0,A1
1608 GPIO2: HEF4052 nENABLE
1610 GPIO8-13: IRDC357 data0-5 (data6 n.c. ?) [chip not present on my card]
1614 ?? : mtu8b56ep microcontroller for IR (GPIO wiring unknown)*/
1616 [BTTV_BOARD_DSP_TCVIDEO] = {
1617 /* Arthur Tetzlaff-Deas, DSP Design Ltd <software@dspdesign.com> */
1618 .name = "DSP Design TCVIDEO",
1621 .muxsel = MUXSEL(2, 3, 1, 0),
1623 .tuner_type = UNSET,
1624 .tuner_addr = ADDR_UNSET,
1627 /* ---- card 0x50 ---------------------------------- */
1628 [BTTV_BOARD_HAUPPAUGEPVR] = {
1629 .name = "Hauppauge WinTV PVR",
1631 /* .audio_inputs= 1, */
1633 .muxsel = MUXSEL(2, 0, 1, 1),
1636 .tuner_type = UNSET,
1637 .tuner_addr = ADDR_UNSET,
1642 [BTTV_BOARD_GVBCTV5PCI] = {
1643 .name = "IODATA GV-BCTV5/PCI",
1645 /* .audio_inputs= 1, */
1647 .gpiomask = 0x0f0f80,
1648 .muxsel = MUXSEL(2, 3, 1, 0),
1649 .gpiomux = {0x030000, 0x010000, 0, 0 },
1650 .gpiomute = 0x020000,
1653 .tuner_type = TUNER_PHILIPS_NTSC_M,
1654 .tuner_addr = ADDR_UNSET,
1655 .audio_mode_gpio= gvbctv5pci_audio,
1658 [BTTV_BOARD_OSPREY1x0] = {
1659 .name = "Osprey 100/150 (878)", /* 0x1(2|3)-45C6-C1 */
1660 .video_inputs = 4, /* id-inputs-clock */
1661 /* .audio_inputs= 0, */
1663 .muxsel = MUXSEL(3, 2, 0, 1),
1665 .tuner_type = TUNER_ABSENT,
1666 .tuner_addr = ADDR_UNSET,
1671 [BTTV_BOARD_OSPREY1x0_848] = {
1672 .name = "Osprey 100/150 (848)", /* 0x04-54C0-C1 & older boards */
1674 /* .audio_inputs= 0, */
1676 .muxsel = MUXSEL(2, 3, 1),
1678 .tuner_type = TUNER_ABSENT,
1679 .tuner_addr = ADDR_UNSET,
1685 /* ---- card 0x54 ---------------------------------- */
1686 [BTTV_BOARD_OSPREY101_848] = {
1687 .name = "Osprey 101 (848)", /* 0x05-40C0-C1 */
1689 /* .audio_inputs= 0, */
1691 .muxsel = MUXSEL(3, 1),
1693 .tuner_type = TUNER_ABSENT,
1694 .tuner_addr = ADDR_UNSET,
1699 [BTTV_BOARD_OSPREY1x1] = {
1700 .name = "Osprey 101/151", /* 0x1(4|5)-0004-C4 */
1702 /* .audio_inputs= 0, */
1704 .muxsel = MUXSEL(0),
1706 .tuner_type = TUNER_ABSENT,
1707 .tuner_addr = ADDR_UNSET,
1712 [BTTV_BOARD_OSPREY1x1_SVID] = {
1713 .name = "Osprey 101/151 w/ svid", /* 0x(16|17|20)-00C4-C1 */
1715 /* .audio_inputs= 0, */
1717 .muxsel = MUXSEL(0, 1),
1719 .tuner_type = TUNER_ABSENT,
1720 .tuner_addr = ADDR_UNSET,
1725 [BTTV_BOARD_OSPREY2xx] = {
1726 .name = "Osprey 200/201/250/251", /* 0x1(8|9|E|F)-0004-C4 */
1728 /* .audio_inputs= 1, */
1730 .muxsel = MUXSEL(0),
1732 .tuner_type = TUNER_ABSENT,
1733 .tuner_addr = ADDR_UNSET,
1739 /* ---- card 0x58 ---------------------------------- */
1740 [BTTV_BOARD_OSPREY2x0_SVID] = {
1741 .name = "Osprey 200/250", /* 0x1(A|B)-00C4-C1 */
1743 /* .audio_inputs= 1, */
1745 .muxsel = MUXSEL(0, 1),
1747 .tuner_type = TUNER_ABSENT,
1748 .tuner_addr = ADDR_UNSET,
1753 [BTTV_BOARD_OSPREY2x0] = {
1754 .name = "Osprey 210/220/230", /* 0x1(A|B)-04C0-C1 */
1756 /* .audio_inputs= 1, */
1758 .muxsel = MUXSEL(2, 3),
1760 .tuner_type = TUNER_ABSENT,
1761 .tuner_addr = ADDR_UNSET,
1766 [BTTV_BOARD_OSPREY500] = {
1767 .name = "Osprey 500", /* 500 */
1769 /* .audio_inputs= 1, */
1771 .muxsel = MUXSEL(2, 3),
1773 .tuner_type = TUNER_ABSENT,
1774 .tuner_addr = ADDR_UNSET,
1779 [BTTV_BOARD_OSPREY540] = {
1780 .name = "Osprey 540", /* 540 */
1782 /* .audio_inputs= 1, */
1784 .tuner_type = TUNER_ABSENT,
1785 .tuner_addr = ADDR_UNSET,
1791 /* ---- card 0x5C ---------------------------------- */
1792 [BTTV_BOARD_OSPREY2000] = {
1793 .name = "Osprey 2000", /* 2000 */
1795 /* .audio_inputs= 1, */
1797 .muxsel = MUXSEL(2, 3),
1799 .tuner_type = TUNER_ABSENT,
1800 .tuner_addr = ADDR_UNSET,
1803 .no_tda7432 = 1, /* must avoid, conflicts with the bt860 */
1805 [BTTV_BOARD_IDS_EAGLE] = {
1806 /* M G Berberich <berberic@forwiss.uni-passau.de> */
1807 .name = "IDS Eagle",
1809 /* .audio_inputs= 0, */
1810 .tuner_type = TUNER_ABSENT,
1811 .tuner_addr = ADDR_UNSET,
1814 .muxsel = MUXSEL(2, 2, 2, 2),
1815 .muxsel_hook = eagle_muxsel,
1820 [BTTV_BOARD_PINNACLESAT] = {
1821 .name = "Pinnacle PCTV Sat",
1823 /* .audio_inputs= 0, */
1825 .tuner_type = TUNER_ABSENT,
1826 .tuner_addr = ADDR_UNSET,
1830 .muxsel = MUXSEL(3, 1),
1835 [BTTV_BOARD_FORMAC_PROTV] = {
1836 .name = "Formac ProTV II (bt878)",
1838 /* .audio_inputs= 1, */
1841 /* TV, Comp1, Composite over SVID con, SVID */
1842 .muxsel = MUXSEL(2, 3, 1, 1),
1843 .gpiomux = { 2, 2, 0, 0 },
1846 .tuner_type = TUNER_PHILIPS_PAL,
1847 .tuner_addr = ADDR_UNSET,
1849 GPIO=0x00,0x01,0x03: mute (?)
1850 0x02: both TV and radio (tuner: FM1216/I)
1851 The card has onboard audio connectors labeled "cdrom" and "board",
1852 not soldered here, though unknown wiring.
1853 Card lacks: external audio in, pci subsystem id.
1857 /* ---- card 0x60 ---------------------------------- */
1858 [BTTV_BOARD_MACHTV] = {
1861 /* .audio_inputs= 1, */
1864 .muxsel = MUXSEL(2, 3, 1, 1),
1865 .gpiomux = { 0, 1, 2, 3},
1868 .tuner_type = TUNER_PHILIPS_PAL,
1869 .tuner_addr = ADDR_UNSET,
1872 [BTTV_BOARD_EURESYS_PICOLO] = {
1873 .name = "Euresys Picolo",
1875 /* .audio_inputs= 0, */
1881 .muxsel = MUXSEL(2, 0, 1),
1883 .tuner_type = TUNER_ABSENT,
1884 .tuner_addr = ADDR_UNSET,
1886 [BTTV_BOARD_PV150] = {
1887 /* Luc Van Hoeylandt <luc@e-magic.be> */
1888 .name = "ProVideo PV150", /* 0x4f */
1890 /* .audio_inputs= 0, */
1893 .muxsel = MUXSEL(2, 3),
1898 .tuner_type = TUNER_ABSENT,
1899 .tuner_addr = ADDR_UNSET,
1901 [BTTV_BOARD_AD_TVK503] = {
1902 /* Hiroshi Takekawa <sian@big.or.jp> */
1903 /* This card lacks subsystem ID */
1904 .name = "AD-TVK503", /* 0x63 */
1906 /* .audio_inputs= 1, */
1908 .gpiomask = 0x001e8007,
1909 .muxsel = MUXSEL(2, 3, 1, 0),
1910 /* Tuner, Radio, external, internal, off, on */
1911 .gpiomux = { 0x08, 0x0f, 0x0a, 0x08 },
1916 .tuner_type = TUNER_PHILIPS_NTSC,
1917 .tuner_addr = ADDR_UNSET,
1918 .audio_mode_gpio= adtvk503_audio,
1921 /* ---- card 0x64 ---------------------------------- */
1922 [BTTV_BOARD_HERCULES_SM_TV] = {
1923 .name = "Hercules Smart TV Stereo",
1925 /* .audio_inputs= 1, */
1928 .muxsel = MUXSEL(2, 3, 1, 1),
1932 .tuner_type = TUNER_PHILIPS_PAL,
1933 .tuner_addr = ADDR_UNSET,
1935 - card lacks subsystem ID
1936 - stereo variant w/ daughter board with tda9874a @0xb0
1938 always from tda9874 independent of GPIO (?)
1939 external line in: unknown
1940 - Other chips: em78p156elp @ 0x96 (probably IR remote control)
1941 hef4053 (instead 4052) for unknown function
1944 [BTTV_BOARD_PACETV] = {
1945 .name = "Pace TV & Radio Card",
1947 /* .audio_inputs= 1, */
1949 /* Tuner, CVid, SVid, CVid over SVid connector */
1950 .muxsel = MUXSEL(2, 3, 1, 1),
1954 .tuner_type = TUNER_PHILIPS_PAL_I,
1955 .tuner_addr = ADDR_UNSET,
1958 /* Bt878, Bt832, FI1246 tuner; no pci subsystem id
1959 only internal line out: (4pin header) RGGL
1960 Radio must be decoded by msp3410d (not routed through)*/
1962 .digital_mode = DIGITAL_MODE_CAMERA, todo!
1965 [BTTV_BOARD_IVC200] = {
1966 /* Chris Willing <chris@vislab.usyd.edu.au> */
1969 /* .audio_inputs= 0, */
1970 .tuner_type = TUNER_ABSENT,
1971 .tuner_addr = ADDR_UNSET,
1974 .muxsel = MUXSEL(2),
1977 [BTTV_BOARD_IVCE8784] = {
1978 .name = "IVCE-8784",
1980 /* .audio_inputs= 0, */
1981 .tuner_type = TUNER_ABSENT,
1982 .tuner_addr = ADDR_UNSET,
1985 .muxsel = MUXSEL(2),
1988 [BTTV_BOARD_XGUARD] = {
1989 .name = "Grand X-Guard / Trust 814PCI",
1991 /* .audio_inputs= 0, */
1993 .tuner_type = TUNER_ABSENT,
1994 .tuner_addr = ADDR_UNSET,
1996 .muxsel = MUXSEL(2,2,2,2, 3,3,3,3, 1,1,1,1, 0,0,0,0),
1997 .muxsel_hook = xguard_muxsel,
2004 /* ---- card 0x68 ---------------------------------- */
2005 [BTTV_BOARD_NEBULA_DIGITV] = {
2006 .name = "Nebula Electronics DigiTV",
2009 .muxsel = MUXSEL(2, 3, 1, 0),
2014 .tuner_type = TUNER_ABSENT,
2015 .tuner_addr = ADDR_UNSET,
2021 [BTTV_BOARD_PV143] = {
2022 /* Jorge Boncompte - DTI2 <jorge@dti2.net> */
2023 .name = "ProVideo PV143",
2025 /* .audio_inputs= 0, */
2028 .muxsel = MUXSEL(2, 3, 1, 0),
2033 .tuner_type = TUNER_ABSENT,
2034 .tuner_addr = ADDR_UNSET,
2036 [BTTV_BOARD_VD009X1_VD011_MINIDIN] = {
2037 /* M.Klahr@phytec.de */
2038 .name = "PHYTEC VD-009-X1 VD-011 MiniDIN (bt878)",
2040 /* .audio_inputs= 0, */
2043 .muxsel = MUXSEL(2, 3, 1, 0),
2044 .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
2047 .tuner_type = TUNER_ABSENT,
2048 .tuner_addr = ADDR_UNSET,
2050 [BTTV_BOARD_VD009X1_VD011_COMBI] = {
2051 .name = "PHYTEC VD-009-X1 VD-011 Combi (bt878)",
2053 /* .audio_inputs= 0, */
2056 .muxsel = MUXSEL(2, 3, 1, 1),
2057 .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
2060 .tuner_type = TUNER_ABSENT,
2061 .tuner_addr = ADDR_UNSET,
2064 /* ---- card 0x6c ---------------------------------- */
2065 [BTTV_BOARD_VD009_MINIDIN] = {
2066 .name = "PHYTEC VD-009 MiniDIN (bt878)",
2068 /* .audio_inputs= 0, */
2071 .gpiomask2 = 0x03, /* used for external vodeo mux */
2072 .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 0),
2073 .muxsel_hook = phytec_muxsel,
2074 .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
2077 .tuner_type = TUNER_ABSENT,
2078 .tuner_addr = ADDR_UNSET,
2080 [BTTV_BOARD_VD009_COMBI] = {
2081 .name = "PHYTEC VD-009 Combi (bt878)",
2083 /* .audio_inputs= 0, */
2086 .gpiomask2 = 0x03, /* used for external vodeo mux */
2087 .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1),
2088 .muxsel_hook = phytec_muxsel,
2089 .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
2092 .tuner_type = TUNER_ABSENT,
2093 .tuner_addr = ADDR_UNSET,
2095 [BTTV_BOARD_IVC100] = {
2098 /* .audio_inputs= 0, */
2099 .tuner_type = TUNER_ABSENT,
2100 .tuner_addr = ADDR_UNSET,
2103 .muxsel = MUXSEL(2, 3, 1, 0),
2106 [BTTV_BOARD_IVC120] = {
2107 /* IVC-120G - Alan Garfield <alan@fromorbit.com> */
2110 /* .audio_inputs= 0, */
2111 .tuner_type = TUNER_ABSENT,
2112 .tuner_addr = ADDR_UNSET,
2113 .svhs = NO_SVHS, /* card has no svhs */
2119 .muxsel = MUXSEL(0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0),
2120 .muxsel_hook = ivc120_muxsel,
2124 /* ---- card 0x70 ---------------------------------- */
2125 [BTTV_BOARD_PC_HDTV] = {
2126 .name = "pcHDTV HD-2000 TV",
2128 /* .audio_inputs= 1, */
2130 .muxsel = MUXSEL(2, 3, 1, 0),
2131 .tuner_type = TUNER_PHILIPS_FCV1236D,
2132 .tuner_addr = ADDR_UNSET,
2135 [BTTV_BOARD_TWINHAN_DST] = {
2136 .name = "Twinhan DST + clones",
2140 .tuner_type = TUNER_ABSENT,
2141 .tuner_addr = ADDR_UNSET,
2145 [BTTV_BOARD_WINFASTVC100] = {
2146 .name = "Winfast VC100",
2148 /* .audio_inputs= 0, */
2150 /* Vid In, SVid In, Vid over SVid in connector */
2151 .muxsel = MUXSEL(3, 1, 1, 3),
2155 .tuner_type = TUNER_ABSENT,
2156 .tuner_addr = ADDR_UNSET,
2159 [BTTV_BOARD_TEV560] = {
2160 .name = "Teppro TEV-560/InterVision IV-560",
2162 /* .audio_inputs= 1, */
2165 .muxsel = MUXSEL(2, 3, 1, 1),
2166 .gpiomux = { 1, 1, 1, 1 },
2168 .tuner_type = TUNER_PHILIPS_PAL,
2169 .tuner_addr = ADDR_UNSET,
2173 /* ---- card 0x74 ---------------------------------- */
2174 [BTTV_BOARD_SIMUS_GVC1100] = {
2175 .name = "SIMUS GVC1100",
2177 /* .audio_inputs= 0, */
2179 .tuner_type = TUNER_ABSENT,
2180 .tuner_addr = ADDR_UNSET,
2182 .muxsel = MUXSEL(2, 2, 2, 2),
2184 .muxsel_hook = gvc1100_muxsel,
2186 [BTTV_BOARD_NGSTV_PLUS] = {
2187 /* Carlos Silva r3pek@r3pek.homelinux.org || card 0x75 */
2188 .name = "NGS NGSTV+",
2191 .gpiomask = 0x008007,
2192 .muxsel = MUXSEL(2, 3, 0, 0),
2193 .gpiomux = { 0, 0, 0, 0 },
2194 .gpiomute = 0x000003,
2196 .tuner_type = TUNER_PHILIPS_PAL,
2197 .tuner_addr = ADDR_UNSET,
2200 [BTTV_BOARD_LMLBT4] = {
2201 /* http://linuxmedialabs.com */
2203 .video_inputs = 4, /* IN1,IN2,IN3,IN4 */
2204 /* .audio_inputs= 0, */
2206 .muxsel = MUXSEL(2, 3, 1, 0),
2211 .tuner_type = TUNER_ABSENT,
2212 .tuner_addr = ADDR_UNSET,
2214 [BTTV_BOARD_TEKRAM_M205] = {
2215 /* Helmroos Harri <harri.helmroos@pp.inet.fi> */
2216 .name = "Tekram M205 PRO",
2218 /* .audio_inputs= 1, */
2219 .tuner_type = TUNER_PHILIPS_PAL,
2220 .tuner_addr = ADDR_UNSET,
2224 .muxsel = MUXSEL(2, 3, 1),
2225 .gpiomux = { 0x68, 0x68, 0x61, 0x61 },
2229 /* ---- card 0x78 ---------------------------------- */
2230 [BTTV_BOARD_CONTVFMI] = {
2231 /* Javier Cendan Ares <jcendan@lycos.es> */
2232 /* bt878 TV + FM without subsystem ID */
2233 .name = "Conceptronic CONTVFMi",
2235 /* .audio_inputs= 1, */
2237 .gpiomask = 0x008007,
2238 .muxsel = MUXSEL(2, 3, 1, 1),
2239 .gpiomux = { 0, 1, 2, 2 },
2243 .tuner_type = TUNER_PHILIPS_PAL,
2244 .tuner_addr = ADDR_UNSET,
2248 [BTTV_BOARD_PICOLO_TETRA_CHIP] = {
2249 /*Eric DEBIEF <debief@telemsa.com>*/
2250 /*EURESYS Picolo Tetra : 4 Conexant Fusion 878A, no audio, video input set with analog multiplexers GPIO controled*/
2251 /* adds picolo_tetra_muxsel(), picolo_tetra_init(), the folowing declaration strucure, and #define BTTV_BOARD_PICOLO_TETRA_CHIP*/
2253 .name = "Euresys Picolo Tetra",
2255 /* .audio_inputs= 0, */
2258 .gpiomask2 = 0x3C<<16,/*Set the GPIO[18]->GPIO[21] as output pin.==> drive the video inputs through analog multiplexers*/
2262 /*878A input is always MUX0, see above.*/
2263 .muxsel = MUXSEL(2, 2, 2, 2),
2264 .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
2267 .muxsel_hook = picolo_tetra_muxsel,/*Required as it doesn't follow the classic input selection policy*/
2268 .tuner_type = TUNER_ABSENT,
2269 .tuner_addr = ADDR_UNSET,
2271 [BTTV_BOARD_SPIRIT_TV] = {
2272 /* Spirit TV Tuner from http://spiritmodems.com.au */
2273 /* Stafford Goodsell <surge@goliath.homeunix.org> */
2274 .name = "Spirit TV Tuner",
2276 /* .audio_inputs= 1, */
2278 .gpiomask = 0x0000000f,
2279 .muxsel = MUXSEL(2, 1, 1),
2280 .gpiomux = { 0x02, 0x00, 0x00, 0x00 },
2281 .tuner_type = TUNER_TEMIC_PAL,
2282 .tuner_addr = ADDR_UNSET,
2286 [BTTV_BOARD_AVDVBT_771] = {
2287 /* Wolfram Joost <wojo@frokaschwei.de> */
2288 .name = "AVerMedia AVerTV DVB-T 771",
2291 .tuner_type = TUNER_ABSENT,
2292 .tuner_addr = ADDR_UNSET,
2293 .muxsel = MUXSEL(3, 3),
2302 /* ---- card 0x7c ---------------------------------- */
2303 [BTTV_BOARD_AVDVBT_761] = {
2304 /* Matt Jesson <dvb@jesson.eclipse.co.uk> */
2305 /* Based on the Nebula card data - added remote and new card number - BTTV_BOARD_AVDVBT_761, see also ir-kbd-gpio.c */
2306 .name = "AverMedia AverTV DVB-T 761",
2309 .muxsel = MUXSEL(3, 1, 2, 0), /* Comp0, S-Video, ?, ? */
2314 .tuner_type = TUNER_ABSENT,
2315 .tuner_addr = ADDR_UNSET,
2320 [BTTV_BOARD_MATRIX_VISIONSQ] = {
2321 /* andre.schwarz@matrix-vision.de */
2322 .name = "MATRIX Vision Sigma-SQ",
2324 /* .audio_inputs= 0, */
2327 .muxsel = MUXSEL(2, 2, 2, 2, 2, 2, 2, 2, 3, 3, 3, 3, 3, 3, 3, 3),
2328 .muxsel_hook = sigmaSQ_muxsel,
2332 .tuner_type = TUNER_ABSENT,
2333 .tuner_addr = ADDR_UNSET,
2335 [BTTV_BOARD_MATRIX_VISIONSLC] = {
2336 /* andre.schwarz@matrix-vision.de */
2337 .name = "MATRIX Vision Sigma-SLC",
2339 /* .audio_inputs= 0, */
2342 .muxsel = MUXSEL(2, 2, 2, 2),
2343 .muxsel_hook = sigmaSLC_muxsel,
2347 .tuner_type = TUNER_ABSENT,
2348 .tuner_addr = ADDR_UNSET,
2350 /* BTTV_BOARD_APAC_VIEWCOMP */
2351 [BTTV_BOARD_APAC_VIEWCOMP] = {
2352 /* Attila Kondoros <attila.kondoros@chello.hu> */
2353 /* bt878 TV + FM 0x00000000 subsystem ID */
2354 .name = "APAC Viewcomp 878(AMAX)",
2356 /* .audio_inputs= 1, */
2359 .muxsel = MUXSEL(2, 3, 1, 1),
2360 .gpiomux = { 2, 0, 0, 0 },
2364 .tuner_type = TUNER_PHILIPS_PAL,
2365 .tuner_addr = ADDR_UNSET,
2366 .has_remote = 1, /* miniremote works, see ir-kbd-gpio.c */
2367 .has_radio = 1, /* not every card has radio */
2370 /* ---- card 0x80 ---------------------------------- */
2371 [BTTV_BOARD_DVICO_DVBT_LITE] = {
2372 /* Chris Pascoe <c.pascoe@itee.uq.edu.au> */
2373 .name = "DViCO FusionHDTV DVB-T Lite",
2380 .tuner_type = TUNER_ABSENT,
2381 .tuner_addr = ADDR_UNSET,
2383 [BTTV_BOARD_VGEAR_MYVCD] = {
2384 /* Steven <photon38@pchome.com.tw> */
2385 .name = "V-Gear MyVCD",
2387 /* .audio_inputs= 1, */
2390 .muxsel = MUXSEL(2, 3, 1, 0),
2391 .gpiomux = {0x31, 0x31, 0x31, 0x31 },
2395 .tuner_type = TUNER_PHILIPS_NTSC_M,
2396 .tuner_addr = ADDR_UNSET,
2399 [BTTV_BOARD_SUPER_TV] = {
2400 /* Rick C <cryptdragoon@gmail.com> */
2401 .name = "Super TV Tuner",
2403 /* .audio_inputs= 1, */
2405 .muxsel = MUXSEL(2, 3, 1, 0),
2406 .tuner_type = TUNER_PHILIPS_NTSC,
2407 .tuner_addr = ADDR_UNSET,
2408 .gpiomask = 0x008007,
2409 .gpiomux = { 0, 0x000001,0,0 },
2413 [BTTV_BOARD_TIBET_CS16] = {
2414 /* Chris Fanning <video4linux@haydon.net> */
2415 .name = "Tibet Systems 'Progress DVR' CS16",
2417 /* .audio_inputs= 0, */
2419 .muxsel = MUXSEL(2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2),
2424 .tuner_type = TUNER_ABSENT,
2425 .tuner_addr = ADDR_UNSET,
2426 .muxsel_hook = tibetCS16_muxsel,
2428 [BTTV_BOARD_KODICOM_4400R] = {
2429 /* Bill Brack <wbrack@mmm.com.hk> */
2431 * Note that, because of the card's wiring, the "master"
2432 * BT878A chip (i.e. the one which controls the analog switch
2433 * and must use this card type) is the 2nd one detected. The
2434 * other 3 chips should use card type 0x85, whose description
2435 * follows this one. There is a EEPROM on the card (which is
2436 * connected to the I2C of one of those other chips), but is
2437 * not currently handled. There is also a facility for a
2438 * "monitor", which is also not currently implemented.
2440 .name = "Kodicom 4400R (master)",
2442 /* .audio_inputs= 0, */
2443 .tuner_type = TUNER_ABSENT,
2444 .tuner_addr = ADDR_UNSET,
2446 /* GPIO bits 0-9 used for analog switch:
2447 * 00 - 03: camera selector
2448 * 04 - 06: channel (controller) selector
2449 * 07: data (1->on, 0->off)
2452 * bit 16 is input from sync separator for the channel
2454 .gpiomask = 0x0003ff,
2456 .muxsel = MUXSEL(3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3),
2461 .muxsel_hook = kodicom4400r_muxsel,
2463 [BTTV_BOARD_KODICOM_4400R_SL] = {
2464 /* Bill Brack <wbrack@mmm.com.hk> */
2465 /* Note that, for reasons unknown, the "master" BT878A chip (i.e. the
2466 * one which controls the analog switch, and must use the card type)
2467 * is the 2nd one detected. The other 3 chips should use this card
2470 .name = "Kodicom 4400R (slave)",
2472 /* .audio_inputs= 0, */
2473 .tuner_type = TUNER_ABSENT,
2474 .tuner_addr = ADDR_UNSET,
2476 .gpiomask = 0x010000,
2478 .muxsel = MUXSEL(3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3),
2483 .muxsel_hook = kodicom4400r_muxsel,
2485 /* ---- card 0x86---------------------------------- */
2486 [BTTV_BOARD_ADLINK_RTV24] = {
2487 /* Michael Henson <mhenson@clarityvi.com> */
2488 /* Adlink RTV24 with special unlock codes */
2489 .name = "Adlink RTV24",
2491 /* .audio_inputs= 1, */
2493 .muxsel = MUXSEL(2, 3, 1, 0),
2494 .tuner_type = UNSET,
2495 .tuner_addr = ADDR_UNSET,
2498 /* ---- card 0x87---------------------------------- */
2499 [BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE] = {
2500 /* Michael Krufky <mkrufky@m1k.net> */
2501 .name = "DViCO FusionHDTV 5 Lite",
2502 .tuner_type = TUNER_LG_TDVS_H06XF, /* TDVS-H064F */
2503 .tuner_addr = ADDR_UNSET,
2505 /* .audio_inputs= 1, */
2507 .muxsel = MUXSEL(2, 3, 1),
2508 .gpiomask = 0x00e00007,
2509 .gpiomux = { 0x00400005, 0, 0x00000001, 0 },
2510 .gpiomute = 0x00c00007,
2516 /* ---- card 0x88---------------------------------- */
2517 [BTTV_BOARD_ACORP_Y878F] = {
2518 /* Mauro Carvalho Chehab <mchehab@infradead.org> */
2519 .name = "Acorp Y878F",
2521 /* .audio_inputs= 1, */
2523 .gpiomask = 0x01fe00,
2524 .muxsel = MUXSEL(2, 3, 1, 1),
2525 .gpiomux = { 0x001e00, 0, 0x018000, 0x014000 },
2526 .gpiomute = 0x002000,
2529 .tuner_type = TUNER_YMEC_TVF66T5_B_DFF,
2530 .tuner_addr = 0xc1 >>1,
2533 /* ---- card 0x89 ---------------------------------- */
2534 [BTTV_BOARD_CONCEPTRONIC_CTVFMI2] = {
2535 .name = "Conceptronic CTVFMi v2",
2537 /* .audio_inputs= 1, */
2539 .gpiomask = 0x001c0007,
2540 .muxsel = MUXSEL(2, 3, 1, 1),
2541 .gpiomux = { 0, 1, 2, 2 },
2545 .tuner_type = TUNER_TENA_9533_DI,
2546 .tuner_addr = ADDR_UNSET,
2550 /* ---- card 0x8a ---------------------------------- */
2551 [BTTV_BOARD_PV_BT878P_2E] = {
2552 .name = "Prolink Pixelview PV-BT878P+ (Rev.2E)",
2554 /* .audio_inputs= 1, */
2557 .gpiomask = 0x01fe00,
2558 .muxsel = MUXSEL(2, 3, 1, 1, 0), /* in 4 is digital */
2559 /* .digital_mode= DIGITAL_MODE_CAMERA, */
2560 .gpiomux = { 0x00400, 0x10400, 0x04400, 0x80000 },
2561 .gpiomute = 0x12400,
2564 .tuner_type = TUNER_LG_PAL_FM,
2565 .tuner_addr = ADDR_UNSET,
2568 /* ---- card 0x8b ---------------------------------- */
2569 [BTTV_BOARD_PV_M4900] = {
2570 /* Sérgio Fortier <sergiofortier@yahoo.com.br> */
2571 .name = "Prolink PixelView PlayTV MPEG2 PV-M4900",
2573 /* .audio_inputs= 1, */
2576 .muxsel = MUXSEL(2, 3, 1, 1),
2577 .gpiomux = { 0x21, 0x20, 0x24, 0x2c },
2581 .tuner_type = TUNER_YMEC_TVF_5533MF,
2582 .tuner_addr = ADDR_UNSET,
2586 /* ---- card 0x8c ---------------------------------- */
2587 /* Has four Bt878 chips behind a PCI bridge, each chip has:
2588 one external BNC composite input (mux 2)
2589 three internal composite inputs (unknown muxes)
2590 an 18-bit stereo A/D (CS5331A), which has:
2591 one external stereo unblanced (RCA) audio connection
2592 one (or 3?) internal stereo balanced (XLR) audio connection
2593 input is selected via gpio to a 14052B mux
2594 (mask=0x300, unbal=0x000, bal=0x100, ??=0x200,0x300)
2595 gain is controlled via an X9221A chip on the I2C bus @0x28
2596 sample rate is controlled via gpio to an MK1413S
2597 (mask=0x3, 32kHz=0x0, 44.1kHz=0x1, 48kHz=0x2, ??=0x3)
2598 There is neither a tuner nor an svideo input. */
2599 [BTTV_BOARD_OSPREY440] = {
2600 .name = "Osprey 440",
2602 /* .audio_inputs= 2, */
2604 .muxsel = MUXSEL(2, 3, 0, 1), /* 3,0,1 are guesses */
2606 .gpiomute = 0x000, /* int + 32kHz */
2607 .gpiomux = { 0, 0, 0x000, 0x100},
2609 .tuner_type = TUNER_ABSENT,
2610 .tuner_addr = ADDR_UNSET,
2615 /* ---- card 0x8d ---------------------------------- */
2616 [BTTV_BOARD_ASOUND_SKYEYE] = {
2617 .name = "Asound Skyeye PCTV",
2619 /* .audio_inputs= 1, */
2622 .muxsel = MUXSEL(2, 3, 1, 1),
2623 .gpiomux = { 2, 0, 0, 0 },
2627 .tuner_type = TUNER_PHILIPS_NTSC,
2628 .tuner_addr = ADDR_UNSET,
2630 /* ---- card 0x8e ---------------------------------- */
2631 [BTTV_BOARD_SABRENT_TVFM] = {
2632 .name = "Sabrent TV-FM (bttv version)",
2634 /* .audio_inputs= 1, */
2636 .gpiomask = 0x108007,
2637 .muxsel = MUXSEL(2, 3, 1, 1),
2638 .gpiomux = { 100000, 100002, 100002, 100000 },
2643 .tuner_type = TUNER_TNF_5335MF,
2644 .tuner_addr = ADDR_UNSET,
2647 /* ---- card 0x8f ---------------------------------- */
2648 [BTTV_BOARD_HAUPPAUGE_IMPACTVCB] = {
2649 .name = "Hauppauge ImpactVCB (bt878)",
2651 /* .audio_inputs= 0, */
2653 .gpiomask = 0x0f, /* old: 7 */
2654 .muxsel = MUXSEL(0, 1, 3, 2), /* Composite 0-3 */
2658 .tuner_type = TUNER_ABSENT,
2659 .tuner_addr = ADDR_UNSET,
2661 [BTTV_BOARD_MACHTV_MAGICTV] = {
2662 /* Julian Calaby <julian.calaby@gmail.com>
2663 * Slightly different from original MachTV definition (0x60)
2665 * FIXME: RegSpy says gpiomask should be "0x001c800f", but it
2666 * stuffs up remote chip. Bug is a pin on the jaecs is not set
2667 * properly (methinks) causing no keyup bits being set */
2669 .name = "MagicTV", /* rebranded MachTV */
2671 /* .audio_inputs= 1, */
2674 .muxsel = MUXSEL(2, 3, 1, 1),
2675 .gpiomux = { 0, 1, 2, 3 },
2677 .tuner_type = TUNER_TEMIC_4009FR5_PAL,
2678 .tuner_addr = ADDR_UNSET,
2683 [BTTV_BOARD_SSAI_SECURITY] = {
2684 .name = "SSAI Security Video Interface",
2686 /* .audio_inputs= 0, */
2688 .muxsel = MUXSEL(0, 1, 2, 3),
2689 .tuner_type = TUNER_ABSENT,
2690 .tuner_addr = ADDR_UNSET,
2692 [BTTV_BOARD_SSAI_ULTRASOUND] = {
2693 .name = "SSAI Ultrasound Video Interface",
2695 /* .audio_inputs= 0, */
2697 .muxsel = MUXSEL(2, 0, 1, 3),
2698 .tuner_type = TUNER_ABSENT,
2699 .tuner_addr = ADDR_UNSET,
2701 /* ---- card 0x94---------------------------------- */
2702 [BTTV_BOARD_DVICO_FUSIONHDTV_2] = {
2703 .name = "DViCO FusionHDTV 2",
2704 .tuner_type = TUNER_PHILIPS_FCV1236D,
2705 .tuner_addr = ADDR_UNSET,
2707 /* .audio_inputs= 1, */
2709 .muxsel = MUXSEL(2, 3, 1),
2710 .gpiomask = 0x00e00007,
2711 .gpiomux = { 0x00400005, 0, 0x00000001, 0 },
2712 .gpiomute = 0x00c00007,
2717 /* ---- card 0x95---------------------------------- */
2718 [BTTV_BOARD_TYPHOON_TVTUNERPCI] = {
2719 .name = "Typhoon TV-Tuner PCI (50684)",
2721 /* .audio_inputs= 1, */
2723 .gpiomask = 0x3014f,
2724 .muxsel = MUXSEL(2, 3, 1, 1),
2725 .gpiomux = { 0x20001,0x10001, 0, 0 },
2729 .tuner_type = TUNER_PHILIPS_PAL_I,
2730 .tuner_addr = ADDR_UNSET,
2732 [BTTV_BOARD_GEOVISION_GV600] = {
2734 .name = "Geovision GV-600",
2736 /* .audio_inputs= 0, */
2739 .muxsel = MUXSEL(2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2),
2740 .muxsel_hook = geovision_muxsel,
2744 .tuner_type = TUNER_ABSENT,
2745 .tuner_addr = ADDR_UNSET,
2747 [BTTV_BOARD_KOZUMI_KTV_01C] = {
2748 /* Mauro Lacy <mauro@lacy.com.ar>
2749 * Based on MagicTV and Conceptronic CONTVFMi */
2751 .name = "Kozumi KTV-01C",
2753 /* .audio_inputs= 1, */
2755 .gpiomask = 0x008007,
2756 .muxsel = MUXSEL(2, 3, 1, 1),
2757 .gpiomux = { 0, 1, 2, 2 }, /* CONTVFMi */
2758 .gpiomute = 3, /* CONTVFMi */
2760 .tuner_type = TUNER_PHILIPS_FM1216ME_MK3, /* TCL MK3 */
2761 .tuner_addr = ADDR_UNSET,
2766 [BTTV_BOARD_ENLTV_FM_2] = {
2767 /* Encore TV Tuner Pro ENL TV-FM-2
2768 Mauro Carvalho Chehab <mchehab@infradead.org */
2769 .name = "Encore ENL TV-FM-2",
2771 /* .audio_inputs= 1, */
2773 /* bit 6 -> IR disabled
2774 bit 18/17 = 00 -> mute
2775 01 -> enable external audio input
2776 10 -> internal audio input (mono?)
2777 11 -> internal audio input
2779 .gpiomask = 0x060040,
2780 .muxsel = MUXSEL(2, 3, 3),
2781 .gpiomux = { 0x60000, 0x60000, 0x20000, 0x20000 },
2783 .tuner_type = TUNER_TCL_MF02GIP_5N,
2784 .tuner_addr = ADDR_UNSET,
2789 [BTTV_BOARD_VD012] = {
2790 /* D.Heer@Phytec.de */
2791 .name = "PHYTEC VD-012 (bt878)",
2793 /* .audio_inputs= 0, */
2796 .muxsel = MUXSEL(0, 2, 3, 1),
2797 .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
2800 .tuner_type = TUNER_ABSENT,
2801 .tuner_addr = ADDR_UNSET,
2803 [BTTV_BOARD_VD012_X1] = {
2804 /* D.Heer@Phytec.de */
2805 .name = "PHYTEC VD-012-X1 (bt878)",
2807 /* .audio_inputs= 0, */
2810 .muxsel = MUXSEL(2, 3, 1),
2811 .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
2814 .tuner_type = TUNER_ABSENT,
2815 .tuner_addr = ADDR_UNSET,
2817 [BTTV_BOARD_VD012_X2] = {
2818 /* D.Heer@Phytec.de */
2819 .name = "PHYTEC VD-012-X2 (bt878)",
2821 /* .audio_inputs= 0, */
2824 .muxsel = MUXSEL(3, 2, 1),
2825 .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
2828 .tuner_type = TUNER_ABSENT,
2829 .tuner_addr = ADDR_UNSET,
2831 [BTTV_BOARD_GEOVISION_GV800S] = {
2832 /* Bruno Christo <bchristo@inf.ufsm.br>
2834 * GeoVision GV-800(S) has 4 Conexant Fusion 878A:
2835 * 1 audio input per BT878A = 4 audio inputs
2836 * 4 video inputs per BT878A = 16 video inputs
2837 * This is the first BT878A chip of the GV-800(S). It's the
2838 * "master" chip and it controls the video inputs through an
2839 * analog multiplexer (a CD22M3494) via some GPIO pins. The
2840 * slaves should use card type 0x9e (following this one).
2841 * There is a EEPROM on the card which is currently not handled.
2842 * The audio input is not working yet.
2844 .name = "Geovision GV-800(S) (master)",
2846 /* .audio_inputs= 1, */
2847 .tuner_type = TUNER_ABSENT,
2848 .tuner_addr = ADDR_UNSET,
2850 .gpiomask = 0xf107f,
2852 .muxsel = MUXSEL(2, 2, 2, 2),
2857 .muxsel_hook = gv800s_muxsel,
2859 [BTTV_BOARD_GEOVISION_GV800S_SL] = {
2860 /* Bruno Christo <bchristo@inf.ufsm.br>
2862 * GeoVision GV-800(S) has 4 Conexant Fusion 878A:
2863 * 1 audio input per BT878A = 4 audio inputs
2864 * 4 video inputs per BT878A = 16 video inputs
2865 * The 3 other BT878A chips are "slave" chips of the GV-800(S)
2866 * and should use this card type.
2867 * The audio input is not working yet.
2869 .name = "Geovision GV-800(S) (slave)",
2871 /* .audio_inputs= 1, */
2872 .tuner_type = TUNER_ABSENT,
2873 .tuner_addr = ADDR_UNSET,
2877 .muxsel = MUXSEL(2, 2, 2, 2),
2882 .muxsel_hook = gv800s_muxsel,
2886 static const unsigned int bttv_num_tvcards = ARRAY_SIZE(bttv_tvcards);
2888 /* ----------------------------------------------------------------------- */
2890 static unsigned char eeprom_data[256];
2895 void __devinit bttv_idcard(struct bttv *btv)
2897 unsigned int gpiobits;
2901 /* read PCI subsystem ID */
2902 pci_read_config_word(btv->c.pci, PCI_SUBSYSTEM_ID, &tmp);
2903 btv->cardid = tmp << 16;
2904 pci_read_config_word(btv->c.pci, PCI_SUBSYSTEM_VENDOR_ID, &tmp);
2907 if (0 != btv->cardid && 0xffffffff != btv->cardid) {
2908 /* look for the card */
2909 for (type = -1, i = 0; cards[i].id != 0; i++)
2910 if (cards[i].id == btv->cardid)
2915 printk(KERN_INFO "bttv%d: detected: %s [card=%d], "
2916 "PCI subsystem ID is %04x:%04x\n",
2917 btv->c.nr,cards[type].name,cards[type].cardnr,
2918 btv->cardid & 0xffff,
2919 (btv->cardid >> 16) & 0xffff);
2920 btv->c.type = cards[type].cardnr;
2923 printk(KERN_INFO "bttv%d: subsystem: %04x:%04x (UNKNOWN)\n",
2924 btv->c.nr, btv->cardid & 0xffff,
2925 (btv->cardid >> 16) & 0xffff);
2926 printk(KERN_DEBUG "please mail id, board name and "
2927 "the correct card= insmod option to video4linux-list@redhat.com\n");
2931 /* let the user override the autodetected type */
2932 if (card[btv->c.nr] < bttv_num_tvcards)
2933 btv->c.type=card[btv->c.nr];
2935 /* print which card config we are using */
2936 printk(KERN_INFO "bttv%d: using: %s [card=%d,%s]\n",btv->c.nr,
2937 bttv_tvcards[btv->c.type].name, btv->c.type,
2938 card[btv->c.nr] < bttv_num_tvcards
2939 ? "insmod option" : "autodetected");
2941 /* overwrite gpio stuff ?? */
2942 if (UNSET == audioall && UNSET == audiomux[0])
2945 if (UNSET != audiomux[0]) {
2947 for (i = 0; i < ARRAY_SIZE(bttv_tvcards->gpiomux); i++) {
2948 bttv_tvcards[btv->c.type].gpiomux[i] = audiomux[i];
2949 gpiobits |= audiomux[i];
2952 gpiobits = audioall;
2953 for (i = 0; i < ARRAY_SIZE(bttv_tvcards->gpiomux); i++) {
2954 bttv_tvcards[btv->c.type].gpiomux[i] = audioall;
2957 bttv_tvcards[btv->c.type].gpiomask = (UNSET != gpiomask) ? gpiomask : gpiobits;
2958 printk(KERN_INFO "bttv%d: gpio config override: mask=0x%x, mux=",
2959 btv->c.nr,bttv_tvcards[btv->c.type].gpiomask);
2960 for (i = 0; i < ARRAY_SIZE(bttv_tvcards->gpiomux); i++) {
2961 printk("%s0x%x", i ? "," : "", bttv_tvcards[btv->c.type].gpiomux[i]);
2967 * (most) board specific initialisations goes here
2970 /* Some Modular Technology cards have an eeprom, but no subsystem ID */
2971 static void identify_by_eeprom(struct bttv *btv, unsigned char eeprom_data[256])
2975 if (0 == strncmp(eeprom_data,"GET MM20xPCTV",13))
2976 type = BTTV_BOARD_MODTEC_205;
2977 else if (0 == strncmp(eeprom_data+20,"Picolo",7))
2978 type = BTTV_BOARD_EURESYS_PICOLO;
2979 else if (eeprom_data[0] == 0x84 && eeprom_data[2]== 0)
2980 type = BTTV_BOARD_HAUPPAUGE; /* old bt848 */
2984 printk("bttv%d: detected by eeprom: %s [card=%d]\n",
2985 btv->c.nr, bttv_tvcards[btv->c.type].name, btv->c.type);
2989 static void flyvideo_gpio(struct bttv *btv)
2991 int gpio, has_remote, has_radio, is_capture_only;
2992 int is_lr90, has_tda9820_tda9821;
2993 int tuner_type = UNSET, ttype;
2995 gpio_inout(0xffffff, 0);
2996 udelay(8); /* without this we would see the 0x1800 mask */
2998 /* FIXME: must restore OUR_EN ??? */
3000 /* all cards provide GPIO info, some have an additional eeprom
3001 * LR50: GPIO coding can be found lower right CP1 .. CP9
3002 * CP9=GPIO23 .. CP1=GPIO15; when OPEN, the corresponding GPIO reads 1.
3004 * LR90: GP9=GPIO23 .. GP1=GPIO15 (right above the bt878)
3006 * lowest 3 bytes are remote control codes (no handshake needed)
3007 * xxxFFF: No remote control chip soldered
3008 * xxxF00(LR26/LR50), xxxFE0(LR90): Remote control chip (LVA001 or CF45) soldered
3009 * Note: Some bits are Audio_Mask !
3011 ttype = (gpio & 0x0f0000) >> 16;
3014 tuner_type = 2; /* NTSC, e.g. TPI8NSR11P */
3017 tuner_type = 39; /* LG NTSC (newer TAPC series) TAPC-H701P */
3020 tuner_type = 5; /* Philips PAL TPI8PSB02P, TPI8PSB12P, TPI8PSB12D or FI1216, FM1216 */
3023 tuner_type = 37; /* LG PAL (newer TAPC series) TAPC-G702P */
3026 tuner_type = 3; /* Philips SECAM(+PAL) FQ1216ME or FI1216MF */
3029 printk(KERN_INFO "bttv%d: FlyVideo_gpio: unknown tuner type.\n", btv->c.nr);
3033 has_remote = gpio & 0x800000;
3034 has_radio = gpio & 0x400000;
3035 /* unknown 0x200000;
3036 * unknown2 0x100000; */
3037 is_capture_only = !(gpio & 0x008000); /* GPIO15 */
3038 has_tda9820_tda9821 = !(gpio & 0x004000);
3039 is_lr90 = !(gpio & 0x002000); /* else LR26/LR50 (LR38/LR51 f. capture only) */
3041 * gpio & 0x001000 output bit for audio routing */
3043 if (is_capture_only)
3044 tuner_type = TUNER_ABSENT; /* No tuner present */
3046 printk(KERN_INFO "bttv%d: FlyVideo Radio=%s RemoteControl=%s Tuner=%d gpio=0x%06x\n",
3047 btv->c.nr, has_radio ? "yes" : "no ",
3048 has_remote ? "yes" : "no ", tuner_type, gpio);
3049 printk(KERN_INFO "bttv%d: FlyVideo LR90=%s tda9821/tda9820=%s capture_only=%s\n",
3050 btv->c.nr, is_lr90 ? "yes" : "no ",
3051 has_tda9820_tda9821 ? "yes" : "no ",
3052 is_capture_only ? "yes" : "no ");
3054 if (tuner_type != UNSET) /* only set if known tuner autodetected, else let insmod option through */
3055 btv->tuner_type = tuner_type;
3056 btv->has_radio = has_radio;
3058 /* LR90 Audio Routing is done by 2 hef4052, so Audio_Mask has 4 bits: 0x001c80
3059 * LR26/LR50 only has 1 hef4052, Audio_Mask 0x000c00
3060 * Audio options: from tuner, from tda9821/tda9821(mono,stereo,sap), from tda9874, ext., mute */
3061 if (has_tda9820_tda9821)
3062 btv->audio_mode_gpio = lt9415_audio;
3063 /* todo: if(has_tda9874) btv->audio_mode_gpio = fv2000s_audio; */
3066 static int miro_tunermap[] = { 0,6,2,3, 4,5,6,0, 3,0,4,5, 5,2,16,1,
3067 14,2,17,1, 4,1,4,3, 1,2,16,1, 4,4,4,4 };
3068 static int miro_fmtuner[] = { 0,0,0,0, 0,0,0,0, 0,0,0,0, 0,0,0,1,
3069 1,1,1,1, 1,1,1,0, 0,0,0,0, 0,1,0,0 };
3071 static void miro_pinnacle_gpio(struct bttv *btv)
3076 gpio_inout(0xffffff, 0);
3078 id = ((gpio>>10) & 63) -1;
3079 msp = bttv_I2CRead(btv, I2C_ADDR_MSP3400, "MSP34xx");
3081 btv->tuner_type = miro_tunermap[id];
3082 if (0 == (gpio & 0x20)) {
3084 if (!miro_fmtuner[id]) {
3085 btv->has_matchbox = 1;
3086 btv->mbox_we = (1<<6);
3087 btv->mbox_most = (1<<7);
3088 btv->mbox_clk = (1<<8);
3089 btv->mbox_data = (1<<9);
3090 btv->mbox_mask = (1<<6)|(1<<7)|(1<<8)|(1<<9);
3096 if (btv->c.type == BTTV_BOARD_MIRO)
3097 btv->c.type = BTTV_BOARD_MIROPRO;
3098 if (btv->c.type == BTTV_BOARD_PINNACLE)
3099 btv->c.type = BTTV_BOARD_PINNACLEPRO;
3102 "bttv%d: miro: id=%d tuner=%d radio=%s stereo=%s\n",
3103 btv->c.nr, id+1, btv->tuner_type,
3104 !btv->has_radio ? "no" :
3105 (btv->has_matchbox ? "matchbox" : "fmtuner"),
3106 (-1 == msp) ? "no" : "yes");
3108 /* new cards with microtune tuner */
3113 info = "PAL / mono";
3114 btv->tda9887_conf = TDA9887_INTERCARRIER;
3117 info = "PAL+SECAM / stereo";
3119 btv->tda9887_conf = TDA9887_QSS;
3122 info = "NTSC / stereo";
3124 btv->tda9887_conf = TDA9887_QSS;
3127 info = "PAL+SECAM / mono";
3128 btv->tda9887_conf = TDA9887_QSS;
3131 info = "NTSC / mono";
3132 btv->tda9887_conf = TDA9887_INTERCARRIER;
3135 info = "NTSC / stereo";
3136 btv->tda9887_conf = TDA9887_INTERCARRIER;
3139 info = "PAL / stereo";
3140 btv->tda9887_conf = TDA9887_INTERCARRIER;
3143 info = "oops: unknown card";
3147 btv->c.type = BTTV_BOARD_PINNACLEPRO;
3149 "bttv%d: pinnacle/mt: id=%d info=\"%s\" radio=%s\n",
3150 btv->c.nr, id, info, btv->has_radio ? "yes" : "no");
3151 btv->tuner_type = TUNER_MT2032;
3155 /* GPIO21 L: Buffer aktiv, H: Buffer inaktiv */
3156 #define LM1882_SYNC_DRIVE 0x200000L
3158 static void init_ids_eagle(struct bttv *btv)
3160 gpio_inout(0xffffff,0xFFFF37);
3161 gpio_write(0x200020);
3163 /* flash strobe inverter ?! */
3164 gpio_write(0x200024);
3166 /* switch sync drive off */
3167 gpio_bits(LM1882_SYNC_DRIVE,LM1882_SYNC_DRIVE);
3169 /* set BT848 muxel to 2 */
3170 btaor((2)<<5, ~(2<<5), BT848_IFORM);
3173 /* Muxsel helper for the IDS Eagle.
3174 * the eagles does not use the standard muxsel-bits but
3175 * has its own multiplexer */
3176 static void eagle_muxsel(struct bttv *btv, unsigned int input)
3178 gpio_bits(3, input & 3);
3181 /* set chroma ADC to sleep */
3182 btor(BT848_ADC_C_SLEEP, BT848_ADC);
3183 /* set to composite video */
3184 btand(~BT848_CONTROL_COMP, BT848_E_CONTROL);
3185 btand(~BT848_CONTROL_COMP, BT848_O_CONTROL);
3187 /* switch sync drive off */
3188 gpio_bits(LM1882_SYNC_DRIVE,LM1882_SYNC_DRIVE);
3191 static void gvc1100_muxsel(struct bttv *btv, unsigned int input)
3193 static const int masks[] = {0x30, 0x01, 0x12, 0x23};
3194 gpio_write(masks[input%4]);
3197 /* LMLBT4x initialization - to allow access to GPIO bits for sensors input and
3200 GPIObit | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
3201 assignment | TI | O3|INx| O2| O1|IN4|IN3|IN2|IN1| | |
3203 IN - sensor inputs, INx - sensor inputs and TI XORed together
3204 O1,O2,O3 - alarm outputs (relays)
3206 OUT ENABLE 1 1 0 . 1 1 0 0 . 0 0 0 0 = 0x6C0
3210 static void init_lmlbt4x(struct bttv *btv)
3212 printk(KERN_DEBUG "LMLBT4x init\n");
3213 btwrite(0x000000, BT848_GPIO_REG_INP);
3214 gpio_inout(0xffffff, 0x0006C0);
3215 gpio_write(0x000000);
3218 static void sigmaSQ_muxsel(struct bttv *btv, unsigned int input)
3220 unsigned int inmux = input % 8;
3221 gpio_inout( 0xf, 0xf );
3222 gpio_bits( 0xf, inmux );
3225 static void sigmaSLC_muxsel(struct bttv *btv, unsigned int input)
3227 unsigned int inmux = input % 4;
3228 gpio_inout( 3<<9, 3<<9 );
3229 gpio_bits( 3<<9, inmux<<9 );
3232 static void geovision_muxsel(struct bttv *btv, unsigned int input)
3234 unsigned int inmux = input % 16;
3235 gpio_inout(0xf, 0xf);
3236 gpio_bits(0xf, inmux);
3239 /* ----------------------------------------------------------------------- */
3241 static void bttv_reset_audio(struct bttv *btv)
3244 * BT878A has a audio-reset register.
3245 * 1. This register is an audio reset function but it is in
3246 * function-0 (video capture) address space.
3247 * 2. It is enough to do this once per power-up of the card.
3248 * 3. There is a typo in the Conexant doc -- it is not at
3249 * 0x5B, but at 0x058. (B is an odd-number, obviously a typo!).
3250 * --//Shrikumar 030609
3256 printk("bttv%d: BT878A ARESET\n",btv->c.nr);
3257 btwrite((1<<7), 0x058);
3262 /* initialization part one -- before registering i2c bus */
3263 void __devinit bttv_init_card1(struct bttv *btv)
3265 switch (btv->c.type) {
3266 case BTTV_BOARD_HAUPPAUGE:
3267 case BTTV_BOARD_HAUPPAUGE878:
3268 boot_msp34xx(btv,5);
3270 case BTTV_BOARD_VOODOOTV_200:
3271 case BTTV_BOARD_VOODOOTV_FM:
3272 boot_msp34xx(btv,20);
3274 case BTTV_BOARD_AVERMEDIA98:
3275 boot_msp34xx(btv,11);
3277 case BTTV_BOARD_HAUPPAUGEPVR:
3280 case BTTV_BOARD_TWINHAN_DST:
3281 case BTTV_BOARD_AVDVBT_771:
3282 case BTTV_BOARD_PINNACLESAT:
3283 btv->use_i2c_hw = 1;
3285 case BTTV_BOARD_ADLINK_RTV24:
3290 if (!bttv_tvcards[btv->c.type].has_dvb)
3291 bttv_reset_audio(btv);
3294 /* initialization part two -- after registering i2c bus */
3295 void __devinit bttv_init_card2(struct bttv *btv)
3297 int addr=ADDR_UNSET;
3299 btv->tuner_type = UNSET;
3301 if (BTTV_BOARD_UNKNOWN == btv->c.type) {
3302 bttv_readee(btv,eeprom_data,0xa0);
3303 identify_by_eeprom(btv,eeprom_data);
3306 switch (btv->c.type) {
3307 case BTTV_BOARD_MIRO:
3308 case BTTV_BOARD_MIROPRO:
3309 case BTTV_BOARD_PINNACLE:
3310 case BTTV_BOARD_PINNACLEPRO:
3312 miro_pinnacle_gpio(btv);
3314 case BTTV_BOARD_FLYVIDEO_98:
3315 case BTTV_BOARD_MAXI:
3316 case BTTV_BOARD_LIFE_FLYKIT:
3317 case BTTV_BOARD_FLYVIDEO:
3318 case BTTV_BOARD_TYPHOON_TVIEW:
3319 case BTTV_BOARD_CHRONOS_VS2:
3320 case BTTV_BOARD_FLYVIDEO_98FM:
3321 case BTTV_BOARD_FLYVIDEO2000:
3322 case BTTV_BOARD_FLYVIDEO98EZ:
3323 case BTTV_BOARD_CONFERENCETV:
3324 case BTTV_BOARD_LIFETEC_9415:
3327 case BTTV_BOARD_HAUPPAUGE:
3328 case BTTV_BOARD_HAUPPAUGE878:
3329 case BTTV_BOARD_HAUPPAUGEPVR:
3330 /* pick up some config infos from the eeprom */
3331 bttv_readee(btv,eeprom_data,0xa0);
3332 hauppauge_eeprom(btv);
3334 case BTTV_BOARD_AVERMEDIA98:
3335 case BTTV_BOARD_AVPHONE98:
3336 bttv_readee(btv,eeprom_data,0xa0);
3337 avermedia_eeprom(btv);
3339 case BTTV_BOARD_PXC200:
3342 case BTTV_BOARD_PICOLO_TETRA_CHIP:
3343 picolo_tetra_init(btv);
3345 case BTTV_BOARD_VHX:
3347 btv->has_matchbox = 1;
3348 btv->mbox_we = 0x20;
3350 btv->mbox_clk = 0x08;
3351 btv->mbox_data = 0x10;
3352 btv->mbox_mask = 0x38;
3354 case BTTV_BOARD_VOBIS_BOOSTAR:
3355 case BTTV_BOARD_TERRATV:
3356 terratec_active_radio_upgrade(btv);
3358 case BTTV_BOARD_MAGICTVIEW061:
3359 if (btv->cardid == 0x3002144f) {
3361 printk("bttv%d: radio detected by subsystem id (CPH05x)\n",btv->c.nr);
3364 case BTTV_BOARD_STB2:
3365 if (btv->cardid == 0x3060121a) {
3366 /* Fix up entry for 3DFX VoodooTV 100,
3367 which is an OEM STB card variant. */
3369 btv->tuner_type=TUNER_TEMIC_NTSC;
3372 case BTTV_BOARD_OSPREY1x0:
3373 case BTTV_BOARD_OSPREY1x0_848:
3374 case BTTV_BOARD_OSPREY101_848:
3375 case BTTV_BOARD_OSPREY1x1:
3376 case BTTV_BOARD_OSPREY1x1_SVID:
3377 case BTTV_BOARD_OSPREY2xx:
3378 case BTTV_BOARD_OSPREY2x0_SVID:
3379 case BTTV_BOARD_OSPREY2x0:
3380 case BTTV_BOARD_OSPREY440:
3381 case BTTV_BOARD_OSPREY500:
3382 case BTTV_BOARD_OSPREY540:
3383 case BTTV_BOARD_OSPREY2000:
3384 bttv_readee(btv,eeprom_data,0xa0);
3385 osprey_eeprom(btv, eeprom_data);
3387 case BTTV_BOARD_IDS_EAGLE:
3388 init_ids_eagle(btv);
3390 case BTTV_BOARD_MODTEC_205:
3391 bttv_readee(btv,eeprom_data,0xa0);
3394 case BTTV_BOARD_LMLBT4:
3397 case BTTV_BOARD_TIBET_CS16:
3398 tibetCS16_init(btv);
3400 case BTTV_BOARD_KODICOM_4400R:
3401 kodicom4400r_init(btv);
3403 case BTTV_BOARD_GEOVISION_GV800S:
3408 /* pll configuration */
3409 if (!(btv->id==848 && btv->revision==0x11)) {
3410 /* defaults from card list */
3411 if (PLL_28 == bttv_tvcards[btv->c.type].pll) {
3412 btv->pll.pll_ifreq=28636363;
3413 btv->pll.pll_crystal=BT848_IFORM_XT0;
3415 if (PLL_35 == bttv_tvcards[btv->c.type].pll) {
3416 btv->pll.pll_ifreq=35468950;
3417 btv->pll.pll_crystal=BT848_IFORM_XT1;
3419 /* insmod options can override */
3420 switch (pll[btv->c.nr]) {
3422 btv->pll.pll_crystal = 0;
3423 btv->pll.pll_ifreq = 0;
3424 btv->pll.pll_ofreq = 0;
3426 case 1: /* 28 MHz */
3428 btv->pll.pll_ifreq = 28636363;
3429 btv->pll.pll_ofreq = 0;
3430 btv->pll.pll_crystal = BT848_IFORM_XT0;
3432 case 2: /* 35 MHz */
3434 btv->pll.pll_ifreq = 35468950;
3435 btv->pll.pll_ofreq = 0;
3436 btv->pll.pll_crystal = BT848_IFORM_XT1;
3440 btv->pll.pll_current = -1;
3442 /* tuner configuration (from card list / autodetect / insmod option) */
3443 if (ADDR_UNSET != bttv_tvcards[btv->c.type].tuner_addr)
3444 addr = bttv_tvcards[btv->c.type].tuner_addr;
3446 if (UNSET != bttv_tvcards[btv->c.type].tuner_type)
3447 if (UNSET == btv->tuner_type)
3448 btv->tuner_type = bttv_tvcards[btv->c.type].tuner_type;
3449 if (UNSET != tuner[btv->c.nr])
3450 btv->tuner_type = tuner[btv->c.nr];
3452 if (btv->tuner_type == TUNER_ABSENT)
3453 printk(KERN_INFO "bttv%d: tuner absent\n", btv->c.nr);
3454 else if(btv->tuner_type == UNSET)
3455 printk(KERN_WARNING "bttv%d: tuner type unset\n", btv->c.nr);
3457 printk(KERN_INFO "bttv%d: tuner type=%d\n", btv->c.nr,
3460 if (UNSET == btv->tuner_type)
3461 btv->tuner_type = TUNER_ABSENT;
3463 if (btv->tuner_type != TUNER_ABSENT) {
3464 struct tuner_setup tun_setup;
3466 /* Load tuner module before issuing tuner config call! */
3468 request_module("tuner");
3470 tun_setup.mode_mask = T_ANALOG_TV | T_DIGITAL_TV;
3471 tun_setup.type = btv->tuner_type;
3472 tun_setup.addr = addr;
3474 if (bttv_tvcards[btv->c.type].has_radio)
3475 tun_setup.mode_mask |= T_RADIO;
3477 bttv_call_i2c_clients(btv, TUNER_SET_TYPE_ADDR, &tun_setup);
3480 if (btv->tda9887_conf) {
3481 struct v4l2_priv_tun_config tda9887_cfg;
3483 tda9887_cfg.tuner = TUNER_TDA9887;
3484 tda9887_cfg.priv = &btv->tda9887_conf;
3486 bttv_call_i2c_clients(btv, TUNER_SET_CONFIG, &tda9887_cfg);
3489 btv->dig = bttv_tvcards[btv->c.type].has_dig_in ?
3490 bttv_tvcards[btv->c.type].video_inputs - 1 : UNSET;
3491 btv->svhs = bttv_tvcards[btv->c.type].svhs == NO_SVHS ?
3492 UNSET : bttv_tvcards[btv->c.type].svhs;
3493 if (svhs[btv->c.nr] != UNSET)
3494 btv->svhs = svhs[btv->c.nr];
3495 if (remote[btv->c.nr] != UNSET)
3496 btv->has_remote = remote[btv->c.nr];
3498 if (bttv_tvcards[btv->c.type].has_radio)
3500 if (bttv_tvcards[btv->c.type].has_remote)
3502 if (!bttv_tvcards[btv->c.type].no_gpioirq)
3504 if (bttv_tvcards[btv->c.type].volume_gpio)
3505 btv->volume_gpio=bttv_tvcards[btv->c.type].volume_gpio;
3506 if (bttv_tvcards[btv->c.type].audio_mode_gpio)
3507 btv->audio_mode_gpio=bttv_tvcards[btv->c.type].audio_mode_gpio;
3512 if (btv->tuner_type == TUNER_ABSENT)
3513 return; /* no tuner or related drivers to load */
3515 /* try to detect audio/fader chips */
3516 if (!bttv_tvcards[btv->c.type].no_msp34xx &&
3517 bttv_I2CRead(btv, I2C_ADDR_MSP3400, "MSP34xx") >=0)
3518 request_module("msp3400");
3520 if (bttv_tvcards[btv->c.type].msp34xx_alt &&
3521 bttv_I2CRead(btv, I2C_ADDR_MSP3400_ALT, "MSP34xx (alternate address)") >=0)
3522 request_module("msp3400");
3524 if (!bttv_tvcards[btv->c.type].no_tda9875 &&
3525 bttv_I2CRead(btv, I2C_ADDR_TDA9875, "TDA9875") >=0)
3526 request_module("tda9875");
3528 if (!bttv_tvcards[btv->c.type].no_tda7432 &&
3529 bttv_I2CRead(btv, I2C_ADDR_TDA7432, "TDA7432") >=0)
3530 request_module("tda7432");
3532 if (bttv_tvcards[btv->c.type].needs_tvaudio)
3533 request_module("tvaudio");
3537 /* ----------------------------------------------------------------------- */
3539 static void modtec_eeprom(struct bttv *btv)
3541 if( strncmp(&(eeprom_data[0x1e]),"Temic 4066 FY5",14) ==0) {
3542 btv->tuner_type=TUNER_TEMIC_4066FY5_PAL_I;
3543 printk("bttv%d: Modtec: Tuner autodetected by eeprom: %s\n",
3544 btv->c.nr,&eeprom_data[0x1e]);
3545 } else if (strncmp(&(eeprom_data[0x1e]),"Alps TSBB5",10) ==0) {
3546 btv->tuner_type=TUNER_ALPS_TSBB5_PAL_I;
3547 printk("bttv%d: Modtec: Tuner autodetected by eeprom: %s\n",
3548 btv->c.nr,&eeprom_data[0x1e]);
3549 } else if (strncmp(&(eeprom_data[0x1e]),"Philips FM1246",14) ==0) {
3550 btv->tuner_type=TUNER_PHILIPS_NTSC;
3551 printk("bttv%d: Modtec: Tuner autodetected by eeprom: %s\n",
3552 btv->c.nr,&eeprom_data[0x1e]);
3554 printk("bttv%d: Modtec: Unknown TunerString: %s\n",
3555 btv->c.nr,&eeprom_data[0x1e]);
3559 static void __devinit hauppauge_eeprom(struct bttv *btv)
3563 tveeprom_hauppauge_analog(&btv->i2c_client, &tv, eeprom_data);
3564 btv->tuner_type = tv.tuner_type;
3565 btv->has_radio = tv.has_radio;
3567 printk("bttv%d: Hauppauge eeprom indicates model#%d\n",
3568 btv->c.nr, tv.model);
3571 * Some of the 878 boards have duplicate PCI IDs. Switch the board
3572 * type based on model #.
3574 if(tv.model == 64900) {
3575 printk("bttv%d: Switching board type from %s to %s\n",
3577 bttv_tvcards[btv->c.type].name,
3578 bttv_tvcards[BTTV_BOARD_HAUPPAUGE_IMPACTVCB].name);
3579 btv->c.type = BTTV_BOARD_HAUPPAUGE_IMPACTVCB;
3583 static int terratec_active_radio_upgrade(struct bttv *btv)
3588 btv->has_matchbox = 1;
3589 btv->mbox_we = 0x10;
3590 btv->mbox_most = 0x20;
3591 btv->mbox_clk = 0x08;
3592 btv->mbox_data = 0x04;
3593 btv->mbox_mask = 0x3c;
3595 btv->mbox_iow = 1 << 8;
3596 btv->mbox_ior = 1 << 9;
3597 btv->mbox_csel = 1 << 10;
3600 tea5757_write(btv, 5 * freq + 0x358); /* write 0x1ed8 */
3601 if (0x1ed8 == tea5757_read(btv)) {
3602 printk("bttv%d: Terratec Active Radio Upgrade found.\n",
3605 btv->has_matchbox = 1;
3608 btv->has_matchbox = 0;
3614 /* ----------------------------------------------------------------------- */
3617 * minimal bootstrap for the WinTV/PVR -- upload altera firmware.
3619 * The hcwamc.rbf firmware file is on the Hauppauge driver CD. Have
3620 * a look at Pvr/pvr45xxx.EXE (self-extracting zip archive, can be
3621 * unpacked with unzip).
3623 #define PVR_GPIO_DELAY 10
3625 #define BTTV_ALT_DATA 0x000001
3626 #define BTTV_ALT_DCLK 0x100000
3627 #define BTTV_ALT_NCONFIG 0x800000
3629 static int __devinit pvr_altera_load(struct bttv *btv, const u8 *micro,
3636 gpio_inout(0xffffff,BTTV_ALT_DATA|BTTV_ALT_DCLK|BTTV_ALT_NCONFIG);
3638 udelay(PVR_GPIO_DELAY);
3640 gpio_write(BTTV_ALT_NCONFIG);
3641 udelay(PVR_GPIO_DELAY);
3643 for (n = 0; n < microlen; n++) {
3645 for (i = 0 ; i < 8 ; i++) {
3646 gpio_bits(BTTV_ALT_DCLK,0);
3648 gpio_bits(BTTV_ALT_DATA,BTTV_ALT_DATA);
3650 gpio_bits(BTTV_ALT_DATA,0);
3651 gpio_bits(BTTV_ALT_DCLK,BTTV_ALT_DCLK);
3655 gpio_bits(BTTV_ALT_DCLK,0);
3656 udelay(PVR_GPIO_DELAY);
3658 /* begin Altera init loop (Not necessary,but doesn't hurt) */
3659 for (i = 0 ; i < 30 ; i++) {
3660 gpio_bits(BTTV_ALT_DCLK,0);
3661 gpio_bits(BTTV_ALT_DCLK,BTTV_ALT_DCLK);
3663 gpio_bits(BTTV_ALT_DCLK,0);
3667 static int __devinit pvr_boot(struct bttv *btv)
3669 const struct firmware *fw_entry;
3672 rc = request_firmware(&fw_entry, "hcwamc.rbf", &btv->c.pci->dev);
3674 printk(KERN_WARNING "bttv%d: no altera firmware [via hotplug]\n",
3678 rc = pvr_altera_load(btv, fw_entry->data, fw_entry->size);
3679 printk(KERN_INFO "bttv%d: altera firmware upload %s\n",
3680 btv->c.nr, (rc < 0) ? "failed" : "ok");
3681 release_firmware(fw_entry);
3685 /* ----------------------------------------------------------------------- */
3686 /* some osprey specific stuff */
3688 static void __devinit osprey_eeprom(struct bttv *btv, const u8 ee[256])
3694 /* This code will nevery actually get called in this case.... */
3695 if (btv->c.type == BTTV_BOARD_UNKNOWN) {
3696 /* this might be an antique... check for MMAC label in eeprom */
3697 if (!strncmp(ee, "MMAC", 4)) {
3699 for (i = 0; i < 21; i++)
3701 if (checksum != ee[21])
3703 cardid = BTTV_BOARD_OSPREY1x0_848;
3704 for (i = 12; i < 21; i++)
3705 serial *= 10, serial += ee[i] - '0';
3708 unsigned short type;
3710 for (i = 4*16; i < 8*16; i += 16) {
3711 u16 checksum = ip_compute_csum(ee + i, 16);
3713 if ((checksum&0xff) + (checksum>>8) == 0xff)
3720 /* found a valid descriptor */
3721 type = get_unaligned_be16((__be16 *)(ee+4));
3726 cardid = BTTV_BOARD_OSPREY1x0_848;
3729 cardid = BTTV_BOARD_OSPREY101_848;
3735 cardid = BTTV_BOARD_OSPREY1x0;
3739 cardid = BTTV_BOARD_OSPREY1x1;
3744 cardid = BTTV_BOARD_OSPREY1x1_SVID;
3750 cardid = BTTV_BOARD_OSPREY2xx;
3754 cardid = BTTV_BOARD_OSPREY2x0_SVID;
3757 cardid = BTTV_BOARD_OSPREY500;
3761 cardid = BTTV_BOARD_OSPREY540;
3762 /* bttv_osprey_540_init(btv); */
3767 cardid = BTTV_BOARD_OSPREY2x0;
3768 /* enable output on select control lines */
3769 gpio_inout(0xffffff,0x000303);
3772 cardid = BTTV_BOARD_OSPREY440;
3775 /* unknown...leave generic, but get serial # */
3776 printk(KERN_INFO "bttv%d: "
3777 "osprey eeprom: unknown card type 0x%04x\n",
3781 serial = get_unaligned_be32((__be32 *)(ee+6));
3784 printk(KERN_INFO "bttv%d: osprey eeprom: card=%d '%s' serial=%u\n",
3786 cardid>0 ? bttv_tvcards[cardid].name : "Unknown", serial);
3788 if (cardid<0 || btv->c.type == cardid)
3791 /* card type isn't set correctly */
3792 if (card[btv->c.nr] < bttv_num_tvcards) {
3793 printk(KERN_WARNING "bttv%d: osprey eeprom: "
3794 "Not overriding user specified card type\n", btv->c.nr);
3796 printk(KERN_INFO "bttv%d: osprey eeprom: "
3797 "Changing card type from %d to %d\n", btv->c.nr,
3798 btv->c.type, cardid);
3799 btv->c.type = cardid;
3803 /* ----------------------------------------------------------------------- */
3804 /* AVermedia specific stuff, from bktr_card.c */
3806 static int tuner_0_table[] = {
3807 TUNER_PHILIPS_NTSC, TUNER_PHILIPS_PAL /* PAL-BG*/,
3808 TUNER_PHILIPS_PAL, TUNER_PHILIPS_PAL /* PAL-I*/,
3809 TUNER_PHILIPS_PAL, TUNER_PHILIPS_PAL,
3810 TUNER_PHILIPS_SECAM, TUNER_PHILIPS_SECAM,
3811 TUNER_PHILIPS_SECAM, TUNER_PHILIPS_PAL,
3812 TUNER_PHILIPS_FM1216ME_MK3 };
3814 static int tuner_1_table[] = {
3815 TUNER_TEMIC_NTSC, TUNER_TEMIC_PAL,
3816 TUNER_TEMIC_PAL, TUNER_TEMIC_PAL,
3817 TUNER_TEMIC_PAL, TUNER_TEMIC_PAL,
3818 TUNER_TEMIC_4012FY5, TUNER_TEMIC_4012FY5, /* TUNER_TEMIC_SECAM */
3819 TUNER_TEMIC_4012FY5, TUNER_TEMIC_PAL};
3821 static void __devinit avermedia_eeprom(struct bttv *btv)
3823 int tuner_make, tuner_tv_fm, tuner_format, tuner_type = 0;
3825 tuner_make = (eeprom_data[0x41] & 0x7);
3826 tuner_tv_fm = (eeprom_data[0x41] & 0x18) >> 3;
3827 tuner_format = (eeprom_data[0x42] & 0xf0) >> 4;
3828 btv->has_remote = (eeprom_data[0x42] & 0x01);
3830 if (tuner_make == 0 || tuner_make == 2)
3831 if (tuner_format <= 0x0a)
3832 tuner_type = tuner_0_table[tuner_format];
3833 if (tuner_make == 1)
3834 if (tuner_format <= 9)
3835 tuner_type = tuner_1_table[tuner_format];
3837 if (tuner_make == 4)
3838 if (tuner_format == 0x09)
3839 tuner_type = TUNER_LG_NTSC_NEW_TAPC; /* TAPC-G702P */
3841 printk(KERN_INFO "bttv%d: Avermedia eeprom[0x%02x%02x]: tuner=",
3842 btv->c.nr, eeprom_data[0x41], eeprom_data[0x42]);
3844 btv->tuner_type = tuner_type;
3845 printk(KERN_CONT "%d", tuner_type);
3847 printk(KERN_CONT "Unknown type");
3848 printk(KERN_CONT " radio:%s remote control:%s\n",
3849 tuner_tv_fm ? "yes" : "no",
3850 btv->has_remote ? "yes" : "no");
3854 * For Voodoo TV/FM and Voodoo 200. These cards' tuners use a TDA9880
3855 * analog demod, which is not I2C controlled like the newer and more common
3856 * TDA9887 series. Instead is has two tri-state input pins, S0 and S1,
3857 * that control the IF for the video and audio. Apparently, bttv GPIO
3858 * 0x10000 is connected to S0. S0 low selects a 38.9 MHz VIF for B/G/D/K/I
3859 * (i.e., PAL) while high selects 45.75 MHz for M/N (i.e., NTSC).
3861 u32 bttv_tda9880_setnorm(struct bttv *btv, u32 gpiobits)
3864 if (btv->audio == TVAUDIO_INPUT_TUNER) {
3865 if (bttv_tvnorms[btv->tvnorm].v4l2_id & V4L2_STD_MN)
3866 gpiobits |= 0x10000;
3868 gpiobits &= ~0x10000;
3871 gpio_bits(bttv_tvcards[btv->c.type].gpiomask, gpiobits);
3877 * reset/enable the MSP on some Hauppauge cards
3878 * Thanks to Kyösti Mälkki (kmalkki@cc.hut.fi)!
3883 static void __devinit boot_msp34xx(struct bttv *btv, int pin)
3885 int mask = (1 << pin);
3887 gpio_inout(mask,mask);
3891 gpio_bits(mask,mask);
3894 bttv_gpio_tracking(btv,"msp34xx");
3896 printk(KERN_INFO "bttv%d: Hauppauge/Voodoo msp34xx: reset line "
3897 "init [%d]\n", btv->c.nr, pin);
3900 /* ----------------------------------------------------------------------- */
3901 /* Imagenation L-Model PXC200 Framegrabber */
3902 /* This is basically the same procedure as
3903 * used by Alessandro Rubini in his pxc200
3904 * driver, but using BTTV functions */
3906 static void __devinit init_PXC200(struct bttv *btv)
3908 static int vals[] __devinitdata = { 0x08, 0x09, 0x0a, 0x0b, 0x0d, 0x0d,
3909 0x01, 0x02, 0x03, 0x04, 0x05, 0x06,
3915 /* Initialise GPIO-connevted stuff */
3916 gpio_inout(0xffffff, (1<<13));
3920 /* GPIO inputs are pulled up, so no need to drive
3921 * reset pin any longer */
3922 gpio_bits(0xffffff, 0);
3924 bttv_gpio_tracking(btv,"pxc200");
3926 /* we could/should try and reset/control the AD pots? but
3927 right now we simply turned off the crushing. Without
3928 this the AGC drifts drifts
3929 remember the EN is reverse logic -->
3930 setting BT848_ADC_AGC_EN disable the AGC
3931 tboult@eecs.lehigh.edu
3934 btwrite(BT848_ADC_RESERVED|BT848_ADC_AGC_EN, BT848_ADC);
3936 /* Initialise MAX517 DAC */
3937 printk(KERN_INFO "Setting DAC reference voltage level ...\n");
3938 bttv_I2CWrite(btv,0x5E,0,0x80,1);
3940 /* Initialise 12C508 PIC */
3941 /* The I2CWrite and I2CRead commmands are actually to the
3942 * same chips - but the R/W bit is included in the address
3943 * argument so the numbers are different */
3946 printk(KERN_INFO "Initialising 12C508 PIC chip ...\n");
3948 /* First of all, enable the clock line. This is used in the PXC200-F */
3949 val = btread(BT848_GPIO_DMA_CTL);
3950 val |= BT848_GPIO_DMA_CTL_GPCLKMODE;
3951 btwrite(val, BT848_GPIO_DMA_CTL);
3953 /* Then, push to 0 the reset pin long enough to reset the *
3954 * device same as above for the reset line, but not the same
3955 * value sent to the GPIO-connected stuff
3956 * which one is the good one? */
3957 gpio_inout(0xffffff,(1<<2));
3962 for (i = 0; i < ARRAY_SIZE(vals); i++) {
3963 tmp=bttv_I2CWrite(btv,0x1E,0,vals[i],1);
3966 "I2C Write(%2.2x) = %i\nI2C Read () = %2.2x\n\n",
3967 vals[i],tmp,bttv_I2CRead(btv,0x1F,NULL));
3971 printk(KERN_INFO "PXC200 Initialised.\n");
3976 /* ----------------------------------------------------------------------- */
3978 * The Adlink RTV-24 (aka Angelo) has some special initialisation to unlock
3979 * it. This apparently involves the following procedure for each 878 chip:
3981 * 1) write 0x00C3FEFF to the GPIO_OUT_EN register
3983 * 2) write to GPIO_DATA
3989 * read from GPIO_DATA into buf (uint_32)
3990 * - if ( data>>18 & 0x01 != 0) || ( buf>>19 & 0x01 != 1 )
3991 * error. ERROR_CPLD_Check_Failed stop.
3993 * 3) write to GPIO_DATA
3994 * - write 0x4400 + 0x0E
3996 * - write 0x4410 + 0x0E
3999 * read from GPIO_DATA into buf (uint_32)
4000 * - if ( buf>>18 & 0x01 ) || ( buf>>19 & 0x01 != 0 )
4001 * error. ERROR_CPLD_Check_Failed.
4003 /* ----------------------------------------------------------------------- */
4005 init_RTV24 (struct bttv *btv)
4007 uint32_t dataRead = 0;
4008 long watchdog_value = 0x0E;
4011 "bttv%d: Adlink RTV-24 initialisation in progress ...\n",
4014 btwrite (0x00c3feff, BT848_GPIO_OUT_EN);
4016 btwrite (0 + watchdog_value, BT848_GPIO_DATA);
4018 btwrite (0x10 + watchdog_value, BT848_GPIO_DATA);
4020 btwrite (0 + watchdog_value, BT848_GPIO_DATA);
4022 dataRead = btread (BT848_GPIO_DATA);
4024 if ((((dataRead >> 18) & 0x01) != 0) || (((dataRead >> 19) & 0x01) != 1)) {
4026 "bttv%d: Adlink RTV-24 initialisation(1) ERROR_CPLD_Check_Failed (read %d)\n",
4027 btv->c.nr, dataRead);
4030 btwrite (0x4400 + watchdog_value, BT848_GPIO_DATA);
4032 btwrite (0x4410 + watchdog_value, BT848_GPIO_DATA);
4034 btwrite (watchdog_value, BT848_GPIO_DATA);
4036 dataRead = btread (BT848_GPIO_DATA);
4038 if ((((dataRead >> 18) & 0x01) != 0) || (((dataRead >> 19) & 0x01) != 0)) {
4040 "bttv%d: Adlink RTV-24 initialisation(2) ERROR_CPLD_Check_Failed (read %d)\n",
4041 btv->c.nr, dataRead);
4047 "bttv%d: Adlink RTV-24 initialisation complete.\n", btv->c.nr);
4052 /* ----------------------------------------------------------------------- */
4053 /* Miro Pro radio stuff -- the tea5757 is connected to some GPIO ports */
4055 * Copyright (c) 1999 Csaba Halasz <qgehali@uni-miskolc.hu>
4056 * This code is placed under the terms of the GNU General Public License
4058 * Brutally hacked by Dan Sheridan <dan.sheridan@contact.org.uk> djs52 8/3/00
4061 static void bus_low(struct bttv *btv, int bit)
4063 if (btv->mbox_ior) {
4064 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
4065 btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
4072 if (btv->mbox_ior) {
4073 gpio_bits(btv->mbox_iow | btv->mbox_csel, 0);
4078 static void bus_high(struct bttv *btv, int bit)
4080 if (btv->mbox_ior) {
4081 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
4082 btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
4089 if (btv->mbox_ior) {
4090 gpio_bits(btv->mbox_iow | btv->mbox_csel, 0);
4095 static int bus_in(struct bttv *btv, int bit)
4097 if (btv->mbox_ior) {
4098 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
4099 btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
4102 gpio_bits(btv->mbox_iow | btv->mbox_csel, 0);
4105 return gpio_read() & (bit);
4108 /* TEA5757 register bits */
4109 #define TEA_FREQ 0:14
4110 #define TEA_BUFFER 15:15
4112 #define TEA_SIGNAL_STRENGTH 16:17
4114 #define TEA_PORT1 18:18
4115 #define TEA_PORT0 19:19
4117 #define TEA_BAND 20:21
4118 #define TEA_BAND_FM 0
4119 #define TEA_BAND_MW 1
4120 #define TEA_BAND_LW 2
4121 #define TEA_BAND_SW 3
4123 #define TEA_MONO 22:22
4124 #define TEA_ALLOW_STEREO 0
4125 #define TEA_FORCE_MONO 1
4127 #define TEA_SEARCH_DIRECTION 23:23
4128 #define TEA_SEARCH_DOWN 0
4129 #define TEA_SEARCH_UP 1
4131 #define TEA_STATUS 24:24
4132 #define TEA_STATUS_TUNED 0
4133 #define TEA_STATUS_SEARCHING 1
4135 /* Low-level stuff */
4136 static int tea5757_read(struct bttv *btv)
4138 unsigned long timeout;
4142 /* better safe than sorry */
4143 gpio_inout(btv->mbox_mask, btv->mbox_clk | btv->mbox_we);
4145 if (btv->mbox_ior) {
4146 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
4147 btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
4152 bttv_gpio_tracking(btv,"tea5757 read");
4154 bus_low(btv,btv->mbox_we);
4155 bus_low(btv,btv->mbox_clk);
4158 timeout= jiffies + msecs_to_jiffies(1000);
4160 /* wait for DATA line to go low; error if it doesn't */
4161 while (bus_in(btv,btv->mbox_data) && time_before(jiffies, timeout))
4163 if (bus_in(btv,btv->mbox_data)) {
4164 printk(KERN_WARNING "bttv%d: tea5757: read timeout\n",btv->c.nr);
4168 dprintk("bttv%d: tea5757:",btv->c.nr);
4169 for (i = 0; i < 24; i++) {
4171 bus_high(btv,btv->mbox_clk);
4173 dprintk("%c",(bus_in(btv,btv->mbox_most) == 0)?'T':'-');
4174 bus_low(btv,btv->mbox_clk);
4176 value |= (bus_in(btv,btv->mbox_data) == 0)?0:1; /* MSB first */
4177 dprintk("%c", (bus_in(btv,btv->mbox_most) == 0)?'S':'M');
4179 dprintk("\nbttv%d: tea5757: read 0x%X\n", btv->c.nr, value);
4183 static int tea5757_write(struct bttv *btv, int value)
4188 gpio_inout(btv->mbox_mask, btv->mbox_clk | btv->mbox_we | btv->mbox_data);
4190 if (btv->mbox_ior) {
4191 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
4192 btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
4196 bttv_gpio_tracking(btv,"tea5757 write");
4198 dprintk("bttv%d: tea5757: write 0x%X\n", btv->c.nr, value);
4199 bus_low(btv,btv->mbox_clk);
4200 bus_high(btv,btv->mbox_we);
4201 for (i = 0; i < 25; i++) {
4202 if (reg & 0x1000000)
4203 bus_high(btv,btv->mbox_data);
4205 bus_low(btv,btv->mbox_data);
4207 bus_high(btv,btv->mbox_clk);
4209 bus_low(btv,btv->mbox_clk);
4212 bus_low(btv,btv->mbox_we); /* unmute !!! */
4216 void tea5757_set_freq(struct bttv *btv, unsigned short freq)
4218 dprintk("tea5757_set_freq %d\n",freq);
4219 tea5757_write(btv, 5 * freq + 0x358); /* add 10.7MHz (see docs) */
4222 /* RemoteVision MX (rv605) muxsel helper [Miguel Freitas]
4224 * This is needed because rv605 don't use a normal multiplex, but a crosspoint
4225 * switch instead (CD22M3494E). This IC can have multiple active connections
4226 * between Xn (input) and Yn (output) pins. We need to clear any existing
4227 * connection prior to establish a new one, pulsing the STROBE pin.
4229 * The board hardwire Y0 (xpoint) to MUX1 and MUXOUT to Yin.
4230 * GPIO pins are wired as:
4231 * GPIO[0:3] - AX[0:3] (xpoint) - P1[0:3] (microcontroller)
4232 * GPIO[4:6] - AY[0:2] (xpoint) - P1[4:6] (microcontroller)
4233 * GPIO[7] - DATA (xpoint) - P1[7] (microcontroller)
4234 * GPIO[8] - - P3[5] (microcontroller)
4235 * GPIO[9] - RESET (xpoint) - P3[6] (microcontroller)
4236 * GPIO[10] - STROBE (xpoint) - P3[7] (microcontroller)
4237 * GPINTR - - P3[4] (microcontroller)
4239 * The microcontroller is a 80C32 like. It should be possible to change xpoint
4240 * configuration either directly (as we are doing) or using the microcontroller
4241 * which is also wired to I2C interface. I have no further info on the
4242 * microcontroller features, one would need to disassembly the firmware.
4243 * note: the vendor refused to give any information on this product, all
4244 * that stuff was found using a multimeter! :)
4246 static void rv605_muxsel(struct bttv *btv, unsigned int input)
4248 static const u8 muxgpio[] = { 0x3, 0x1, 0x2, 0x4, 0xf, 0x7, 0xe, 0x0,
4249 0xd, 0xb, 0xc, 0x6, 0x9, 0x5, 0x8, 0xa };
4251 gpio_bits(0x07f, muxgpio[input]);
4253 /* reset all conections */
4254 gpio_bits(0x200,0x200);
4256 gpio_bits(0x200,0x000);
4259 /* create a new connection */
4260 gpio_bits(0x480,0x480);
4262 gpio_bits(0x480,0x080);
4266 /* Tibet Systems 'Progress DVR' CS16 muxsel helper [Chris Fanning]
4268 * The CS16 (available on eBay cheap) is a PCI board with four Fusion
4269 * 878A chips, a PCI bridge, an Atmel microcontroller, four sync seperator
4270 * chips, ten eight input analog multiplexors, a not chip and a few
4273 * 16 inputs on a secondary bracket are provided and can be selected
4274 * from each of the four capture chips. Two of the eight input
4275 * multiplexors are used to select from any of the 16 input signals.
4277 * Unsupported hardware capabilities:
4278 * . A video output monitor on the secondary bracket can be selected from
4279 * one of the 878A chips.
4280 * . Another passthrough but I haven't spent any time investigating it.
4281 * . Digital I/O (logic level connected to GPIO) is available from an
4284 * The on chip input mux should always be set to 2.
4285 * GPIO[16:19] - Video input selection
4286 * GPIO[0:3] - Video output monitor select (only available from one 878A)
4287 * GPIO[?:?] - Digital I/O.
4289 * There is an ATMEL microcontroller with an 8031 core on board. I have not
4290 * determined what function (if any) it provides. With the microcontroller
4291 * and sync seperator chips a guess is that it might have to do with video
4292 * switching and maybe some digital I/O.
4294 static void tibetCS16_muxsel(struct bttv *btv, unsigned int input)
4297 gpio_bits(0x0f0000, input << 16);
4300 static void tibetCS16_init(struct bttv *btv)
4302 /* enable gpio bits, mask obtained via btSpy */
4303 gpio_inout(0xffffff, 0x0f7fff);
4304 gpio_write(0x0f7fff);
4308 * The following routines for the Kodicom-4400r get a little mind-twisting.
4309 * There is a "master" controller and three "slave" controllers, together
4310 * an analog switch which connects any of 16 cameras to any of the BT87A's.
4311 * The analog switch is controlled by the "master", but the detection order
4312 * of the four BT878A chips is in an order which I just don't understand.
4313 * The "master" is actually the second controller to be detected. The
4314 * logic on the board uses logical numbers for the 4 controllers, but
4315 * those numbers are different from the detection sequence. When working
4316 * with the analog switch, we need to "map" from the detection sequence
4317 * over to the board's logical controller number. This mapping sequence
4318 * is {3, 0, 2, 1}, i.e. the first controller to be detected is logical
4319 * unit 3, the second (which is the master) is logical unit 0, etc.
4320 * We need to maintain the status of the analog switch (which of the 16
4321 * cameras is connected to which of the 4 controllers). Rather than
4322 * add to the bttv structure for this, we use the data reserved for
4323 * the mbox (unused for this card type).
4327 * First a routine to set the analog switch, which controls which camera
4328 * is routed to which controller. The switch comprises an X-address
4329 * (gpio bits 0-3, representing the camera, ranging from 0-15), and a
4330 * Y-address (gpio bits 4-6, representing the controller, ranging from 0-3).
4331 * A data value (gpio bit 7) of '1' enables the switch, and '0' disables
4332 * the switch. A STROBE bit (gpio bit 8) latches the data value into the
4333 * specified address. The idea is to set the address and data, then bring
4334 * STROBE high, and finally bring STROBE back to low.
4336 static void kodicom4400r_write(struct bttv *btv,
4337 unsigned char xaddr,
4338 unsigned char yaddr,
4339 unsigned char data) {
4342 udata = (data << 7) | ((yaddr&3) << 4) | (xaddr&0xf);
4343 gpio_bits(0x1ff, udata); /* write ADDR and DAT */
4344 gpio_bits(0x1ff, udata | (1 << 8)); /* strobe high */
4345 gpio_bits(0x1ff, udata); /* strobe low */
4349 * Next the mux select. Both the "master" and "slave" 'cards' (controllers)
4350 * use this routine. The routine finds the "master" for the card, maps
4351 * the controller number from the detected position over to the logical
4352 * number, writes the appropriate data to the analog switch, and housekeeps
4353 * the local copy of the switch information. The parameter 'input' is the
4354 * requested camera number (0 - 15).
4356 static void kodicom4400r_muxsel(struct bttv *btv, unsigned int input)
4361 static unsigned char map[4] = {3, 0, 2, 1};
4363 mctlr = master[btv->c.nr];
4364 if (mctlr == NULL) { /* ignore if master not yet detected */
4367 yaddr = (btv->c.nr - mctlr->c.nr + 1) & 3; /* the '&' is for safety */
4369 sw_status = (char *)(&mctlr->mbox_we);
4370 xaddr = input & 0xf;
4371 /* Check if the controller/camera pair has changed, else ignore */
4372 if (sw_status[yaddr] != xaddr)
4374 /* "open" the old switch, "close" the new one, save the new */
4375 kodicom4400r_write(mctlr, sw_status[yaddr], yaddr, 0);
4376 sw_status[yaddr] = xaddr;
4377 kodicom4400r_write(mctlr, xaddr, yaddr, 1);
4382 * During initialisation, we need to reset the analog switch. We
4383 * also preset the switch to map the 4 connectors on the card to the
4384 * *user's* (see above description of kodicom4400r_muxsel) channels
4387 static void kodicom4400r_init(struct bttv *btv)
4389 char *sw_status = (char *)(&btv->mbox_we);
4392 gpio_inout(0x0003ff, 0x0003ff);
4393 gpio_write(1 << 9); /* reset MUX */
4395 /* Preset camera 0 to the 4 controllers */
4396 for (ix = 0; ix < 4; ix++) {
4398 kodicom4400r_write(btv, ix, ix, 1);
4401 * Since this is the "master", we need to set up the
4402 * other three controller chips' pointers to this structure
4403 * for later use in the muxsel routine.
4405 if ((btv->c.nr<1) || (btv->c.nr>BTTV_MAX-3))
4407 master[btv->c.nr-1] = btv;
4408 master[btv->c.nr] = btv;
4409 master[btv->c.nr+1] = btv;
4410 master[btv->c.nr+2] = btv;
4413 /* The Grandtec X-Guard framegrabber card uses two Dual 4-channel
4414 * video multiplexers to provide up to 16 video inputs. These
4415 * multiplexers are controlled by the lower 8 GPIO pins of the
4416 * bt878. The multiplexers probably Pericom PI5V331Q or similar.
4418 * xxx0 is pin xxx of multiplexer U5,
4419 * yyy1 is pin yyy of multiplexer U2
4431 static void xguard_muxsel(struct bttv *btv, unsigned int input)
4433 static const int masks[] = {
4434 ENB0, ENB0|IN00, ENB0|IN10, ENB0|IN00|IN10,
4435 ENA0, ENA0|IN00, ENA0|IN10, ENA0|IN00|IN10,
4436 ENB1, ENB1|IN01, ENB1|IN11, ENB1|IN01|IN11,
4437 ENA1, ENA1|IN01, ENA1|IN11, ENA1|IN01|IN11,
4439 gpio_write(masks[input%16]);
4441 static void picolo_tetra_init(struct bttv *btv)
4443 /*This is the video input redirection fonctionality : I DID NOT USED IT. */
4444 btwrite (0x08<<16,BT848_GPIO_DATA);/*GPIO[19] [==> 4053 B+C] set to 1 */
4445 btwrite (0x04<<16,BT848_GPIO_DATA);/*GPIO[18] [==> 4053 A] set to 1*/
4447 static void picolo_tetra_muxsel (struct bttv* btv, unsigned int input)
4450 dprintk (KERN_DEBUG "bttv%d : picolo_tetra_muxsel => input = %d\n",btv->c.nr,input);
4451 /*Just set the right path in the analog multiplexers : channel 1 -> 4 ==> Analog Mux ==> MUX0*/
4452 /*GPIO[20]&GPIO[21] used to choose the right input*/
4453 btwrite (input<<20,BT848_GPIO_DATA);
4458 * ivc120_muxsel [Added by Alan Garfield <alan@fromorbit.com>]
4460 * The IVC120G security card has 4 i2c controlled TDA8540 matrix
4461 * swichers to provide 16 channels to MUX0. The TDA8540's have
4462 * 4 independent outputs and as such the IVC120G also has the
4463 * optional "Monitor Out" bus. This allows the card to be looking
4464 * at one input while the monitor is looking at another.
4466 * Since I've couldn't be bothered figuring out how to add an
4467 * independant muxsel for the monitor bus, I've just set it to
4468 * whatever the card is looking at.
4470 * OUT0 of the TDA8540's is connected to MUX0 (0x03)
4471 * OUT1 of the TDA8540's is connected to "Monitor Out" (0x0C)
4473 * TDA8540_ALT3 IN0-3 = Channel 13 - 16 (0x03)
4474 * TDA8540_ALT4 IN0-3 = Channel 1 - 4 (0x03)
4475 * TDA8540_ALT5 IN0-3 = Channel 5 - 8 (0x03)
4476 * TDA8540_ALT6 IN0-3 = Channel 9 - 12 (0x03)
4480 /* All 7 possible sub-ids for the TDA8540 Matrix Switcher */
4481 #define I2C_TDA8540 0x90
4482 #define I2C_TDA8540_ALT1 0x92
4483 #define I2C_TDA8540_ALT2 0x94
4484 #define I2C_TDA8540_ALT3 0x96
4485 #define I2C_TDA8540_ALT4 0x98
4486 #define I2C_TDA8540_ALT5 0x9a
4487 #define I2C_TDA8540_ALT6 0x9c
4489 static void ivc120_muxsel(struct bttv *btv, unsigned int input)
4492 int key = input % 4;
4493 int matrix = input / 4;
4495 dprintk("bttv%d: ivc120_muxsel: Input - %02d | TDA - %02d | In - %02d\n",
4496 btv->c.nr, input, matrix, key);
4498 /* Handles the input selection on the TDA8540's */
4499 bttv_I2CWrite(btv, I2C_TDA8540_ALT3, 0x00,
4500 ((matrix == 3) ? (key | key << 2) : 0x00), 1);
4501 bttv_I2CWrite(btv, I2C_TDA8540_ALT4, 0x00,
4502 ((matrix == 0) ? (key | key << 2) : 0x00), 1);
4503 bttv_I2CWrite(btv, I2C_TDA8540_ALT5, 0x00,
4504 ((matrix == 1) ? (key | key << 2) : 0x00), 1);
4505 bttv_I2CWrite(btv, I2C_TDA8540_ALT6, 0x00,
4506 ((matrix == 2) ? (key | key << 2) : 0x00), 1);
4508 /* Handles the output enables on the TDA8540's */
4509 bttv_I2CWrite(btv, I2C_TDA8540_ALT3, 0x02,
4510 ((matrix == 3) ? 0x03 : 0x00), 1); /* 13 - 16 */
4511 bttv_I2CWrite(btv, I2C_TDA8540_ALT4, 0x02,
4512 ((matrix == 0) ? 0x03 : 0x00), 1); /* 1-4 */
4513 bttv_I2CWrite(btv, I2C_TDA8540_ALT5, 0x02,
4514 ((matrix == 1) ? 0x03 : 0x00), 1); /* 5-8 */
4515 bttv_I2CWrite(btv, I2C_TDA8540_ALT6, 0x02,
4516 ((matrix == 2) ? 0x03 : 0x00), 1); /* 9-12 */
4518 /* 878's MUX0 is already selected for input via muxsel values */
4522 /* PXC200 muxsel helper
4523 * luke@syseng.anu.edu.au
4524 * another transplant
4525 * from Alessandro Rubini (rubini@linux.it)
4527 * There are 4 kinds of cards:
4528 * PXC200L which is bt848
4529 * PXC200F which is bt848 with PIC controlling mux
4530 * PXC200AL which is bt878
4531 * PXC200AF which is bt878 with PIC controlling mux
4533 #define PX_CFG_PXC200F 0x01
4534 #define PX_FLAG_PXC200A 0x00001000 /* a pxc200A is bt-878 based */
4535 #define PX_I2C_PIC 0x0f
4536 #define PX_PXC200A_CARDID 0x200a1295
4537 #define PX_I2C_CMD_CFG 0x00
4539 static void PXC200_muxsel(struct bttv *btv, unsigned int input)
4544 unsigned char buf[2];
4546 /* Read PIC config to determine if this is a PXC200F */
4550 rc=bttv_I2CWrite(btv,(PX_I2C_PIC<<1),buf[0],buf[1],1);
4552 printk(KERN_DEBUG "bttv%d: PXC200_muxsel: pic cfg write failed:%d\n", btv->c.nr,rc);
4553 /* not PXC ? do nothing */
4557 rc=bttv_I2CRead(btv,(PX_I2C_PIC<<1),NULL);
4558 if (!(rc & PX_CFG_PXC200F)) {
4559 printk(KERN_DEBUG "bttv%d: PXC200_muxsel: not PXC200F rc:%d \n", btv->c.nr,rc);
4564 /* The multiplexer in the 200F is handled by the GPIO port */
4565 /* get correct mapping between inputs */
4566 /* mux = bttv_tvcards[btv->type].muxsel[input] & 3; */
4567 /* ** not needed!? */
4570 /* make sure output pins are enabled */
4571 /* bitmask=0x30f; */
4573 /* check whether we have a PXC200A */
4574 if (btv->cardid == PX_PXC200A_CARDID) {
4575 bitmask ^= 0x180; /* use 7 and 9, not 8 and 9 */
4576 bitmask |= 7<<4; /* the DAC */
4578 btwrite(bitmask, BT848_GPIO_OUT_EN);
4580 bitmask = btread(BT848_GPIO_DATA);
4581 if (btv->cardid == PX_PXC200A_CARDID)
4582 bitmask = (bitmask & ~0x280) | ((mux & 2) << 8) | ((mux & 1) << 7);
4583 else /* older device */
4584 bitmask = (bitmask & ~0x300) | ((mux & 3) << 8);
4585 btwrite(bitmask,BT848_GPIO_DATA);
4588 * Was "to be safe, set the bt848 to input 0"
4589 * Actually, since it's ok at load time, better not messing
4590 * with these bits (on PXC200AF you need to set mux 2 here)
4592 * needed because bttv-driver sets mux before calling this function
4594 if (btv->cardid == PX_PXC200A_CARDID)
4595 btaor(2<<5, ~BT848_IFORM_MUXSEL, BT848_IFORM);
4596 else /* older device */
4597 btand(~BT848_IFORM_MUXSEL,BT848_IFORM);
4599 printk(KERN_DEBUG "bttv%d: setting input channel to:%d\n", btv->c.nr,(int)mux);
4602 static void phytec_muxsel(struct bttv *btv, unsigned int input)
4604 unsigned int mux = input % 4;
4606 if (input == btv->svhs)
4609 gpio_bits(0x3, mux);
4613 * GeoVision GV-800(S) functions
4614 * Bruno Christo <bchristo@inf.ufsm.br>
4617 /* This is a function to control the analog switch, which determines which
4618 * camera is routed to which controller. The switch comprises an X-address
4619 * (gpio bits 0-3, representing the camera, ranging from 0-15), and a
4620 * Y-address (gpio bits 4-6, representing the controller, ranging from 0-3).
4621 * A data value (gpio bit 18) of '1' enables the switch, and '0' disables
4622 * the switch. A STROBE bit (gpio bit 17) latches the data value into the
4623 * specified address. There is also a chip select (gpio bit 16).
4624 * The idea is to set the address and chip select together, bring
4625 * STROBE high, write the data, and finally bring STROBE back to low.
4627 static void gv800s_write(struct bttv *btv,
4628 unsigned char xaddr,
4629 unsigned char yaddr,
4630 unsigned char data) {
4631 /* On the "master" 878A:
4632 * GPIO bits 0-9 are used for the analog switch:
4633 * 00 - 03: camera selector
4634 * 04 - 06: 878A (controller) selector
4637 * 18: data (1->on, 0->off)
4640 const u32 ADDRESS = ((xaddr&0xf) | (yaddr&3)<<4);
4641 const u32 CSELECT = 1<<16;
4642 const u32 STROBE = 1<<17;
4643 const u32 DATA = data<<18;
4645 gpio_bits(0x1007f, ADDRESS | CSELECT); /* write ADDRESS and CSELECT */
4646 gpio_bits(0x20000, STROBE); /* STROBE high */
4647 gpio_bits(0x40000, DATA); /* write DATA */
4648 gpio_bits(0x20000, ~STROBE); /* STROBE low */
4652 * GeoVision GV-800(S) muxsel
4654 * Each of the 4 cards (controllers) use this function.
4655 * The controller using this function selects the input through the GPIO pins
4656 * of the "master" card. A pointer to this card is stored in master[btv->c.nr].
4658 * The parameter 'input' is the requested camera number (0-4) on the controller.
4659 * The map array has the address of each input. Note that the addresses in the
4660 * array are in the sequence the original GeoVision driver uses, that is, set
4661 * every controller to input 0, then to input 1, 2, 3, repeat. This means that
4662 * the physical "camera 1" connector corresponds to controller 0 input 0,
4663 * "camera 2" corresponds to controller 1 input 0, and so on.
4665 * After getting the input address, the function then writes the appropriate
4666 * data to the analog switch, and housekeeps the local copy of the switch
4669 static void gv800s_muxsel(struct bttv *btv, unsigned int input)
4674 static unsigned int map[4][4] = { { 0x0, 0x4, 0xa, 0x6 },
4675 { 0x1, 0x5, 0xb, 0x7 },
4676 { 0x2, 0x8, 0xc, 0xe },
4677 { 0x3, 0x9, 0xd, 0xf } };
4679 mctlr = master[btv->c.nr];
4680 if (mctlr == NULL) {
4681 /* do nothing until the "master" is detected */
4684 yaddr = (btv->c.nr - mctlr->c.nr) & 3;
4685 sw_status = (char *)(&mctlr->mbox_we);
4686 xaddr = map[yaddr][input] & 0xf;
4688 /* Check if the controller/camera pair has changed, ignore otherwise */
4689 if (sw_status[yaddr] != xaddr) {
4690 /* disable the old switch, enable the new one and save status */
4691 gv800s_write(mctlr, sw_status[yaddr], yaddr, 0);
4692 sw_status[yaddr] = xaddr;
4693 gv800s_write(mctlr, xaddr, yaddr, 1);
4697 /* GeoVision GV-800(S) "master" chip init */
4698 static void gv800s_init(struct bttv *btv)
4700 char *sw_status = (char *)(&btv->mbox_we);
4703 gpio_inout(0xf107f, 0xf107f);
4704 gpio_write(1<<19); /* reset the analog MUX */
4707 /* Preset camera 0 to the 4 controllers */
4708 for (ix = 0; ix < 4; ix++) {
4710 gv800s_write(btv, ix, ix, 1);
4713 /* Inputs on the "master" controller need this brightness fix */
4714 bttv_I2CWrite(btv, 0x18, 0x5, 0x90, 1);
4716 if (btv->c.nr > BTTV_MAX-4)
4719 * Store the "master" controller pointer in the master
4720 * array for later use in the muxsel function.
4722 master[btv->c.nr] = btv;
4723 master[btv->c.nr+1] = btv;
4724 master[btv->c.nr+2] = btv;
4725 master[btv->c.nr+3] = btv;
4728 /* ----------------------------------------------------------------------- */
4729 /* motherboard chipset specific stuff */
4731 void __init bttv_check_chipset(void)
4733 int pcipci_fail = 0;
4734 struct pci_dev *dev = NULL;
4736 if (pci_pci_problems & (PCIPCI_FAIL|PCIAGP_FAIL)) /* should check if target is AGP */
4738 if (pci_pci_problems & (PCIPCI_TRITON|PCIPCI_NATOMA|PCIPCI_VIAETBF))
4740 if (pci_pci_problems & PCIPCI_VSFX)
4742 #ifdef PCIPCI_ALIMAGIK
4743 if (pci_pci_problems & PCIPCI_ALIMAGIK)
4748 /* print warnings about any quirks found */
4750 printk(KERN_INFO "bttv: Host bridge needs ETBF enabled.\n");
4752 printk(KERN_INFO "bttv: Host bridge needs VSFX enabled.\n");
4754 printk(KERN_INFO "bttv: bttv and your chipset may not work "
4757 printk(KERN_INFO "bttv: overlay will be disabled.\n");
4760 printk(KERN_INFO "bttv: overlay forced. Use this "
4761 "option at your own risk.\n");
4764 if (UNSET != latency)
4765 printk(KERN_INFO "bttv: pci latency fixup [%d]\n",latency);
4766 while ((dev = pci_get_device(PCI_VENDOR_ID_INTEL,
4767 PCI_DEVICE_ID_INTEL_82441, dev))) {
4769 pci_read_config_byte(dev, 0x53, &b);
4771 printk(KERN_INFO "bttv: Host bridge: 82441FX Natoma, "
4772 "bufcon=0x%02x\n",b);
4776 int __devinit bttv_handle_chipset(struct bttv *btv)
4778 unsigned char command;
4780 if (!triton1 && !vsfx && UNSET == latency)
4785 printk(KERN_INFO "bttv%d: enabling ETBF (430FX/VP3 compatibilty)\n",btv->c.nr);
4786 if (vsfx && btv->id >= 878)
4787 printk(KERN_INFO "bttv%d: enabling VSFX\n",btv->c.nr);
4788 if (UNSET != latency)
4789 printk(KERN_INFO "bttv%d: setting pci timer to %d\n",
4793 if (btv->id < 878) {
4794 /* bt848 (mis)uses a bit in the irq mask for etbf */
4796 btv->triton1 = BT848_INT_ETBF;
4798 /* bt878 has a bit in the pci config space for it */
4799 pci_read_config_byte(btv->c.pci, BT878_DEVCTRL, &command);
4801 command |= BT878_EN_TBFX;
4803 command |= BT878_EN_VSFX;
4804 pci_write_config_byte(btv->c.pci, BT878_DEVCTRL, command);
4806 if (UNSET != latency)
4807 pci_write_config_byte(btv->c.pci, PCI_LATENCY_TIMER, latency);