drivers/media/video/em28xx/em28xx-cards.c

   1 /*
   2    em28xx-cards.c - driver for Empia EM2800/EM2820/2840 USB
   3                     video capture devices
   4
   5    Copyright (C) 2005 Ludovico Cavedon <cavedon@sssup.it>
   6                       Markus Rechberger <mrechberger@gmail.com>
   7                       Mauro Carvalho Chehab <mchehab@infradead.org>
   8                       Sascha Sommer <saschasommer@freenet.de>
   9
  10    This program is free software; you can redistribute it and/or modify
  11    it under the terms of the GNU General Public License as published by
  12    the Free Software Foundation; either version 2 of the License, or
  13    (at your option) any later version.
  14
  15    This program is distributed in the hope that it will be useful,
  16    but WITHOUT ANY WARRANTY; without even the implied warranty of
  17    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  18    GNU General Public License for more details.
  19
  20    You should have received a copy of the GNU General Public License
  21    along with this program; if not, write to the Free Software
  22    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  23  */
  24
  25 #include <linux/init.h>
  26 #include <linux/module.h>
  27 #include <linux/delay.h>
  28 #include <linux/i2c.h>
  29 #include <linux/usb.h>
  30 #include <media/tuner.h>
  31 #include <media/msp3400.h>
  32 #include <media/saa7115.h>
  33 #include <media/tvp5150.h>
  34 #include <media/tvaudio.h>
  35 #include <media/i2c-addr.h>
  36 #include <media/tveeprom.h>
  37 #include <media/v4l2-common.h>
  38 #include <media/v4l2-chip-ident.h>
  39
  40 #include "em28xx.h"
  41
  42 #define DRIVER_NAME         "em28xx"
  43
  44 static int tuner = -1;
  45 module_param(tuner, int, 0444);
  46 MODULE_PARM_DESC(tuner, "tuner type");
  47
  48 static unsigned int disable_ir;
  49 module_param(disable_ir, int, 0444);
  50 MODULE_PARM_DESC(disable_ir, "disable infrared remote support");
  51
  52 static unsigned int disable_usb_speed_check;
  53 module_param(disable_usb_speed_check, int, 0444);
  54 MODULE_PARM_DESC(disable_usb_speed_check,
  55                  "override min bandwidth requirement of 480M bps");
  56
  57 static unsigned int card[]     = {[0 ... (EM28XX_MAXBOARDS - 1)] = UNSET };
  58 module_param_array(card,  int, NULL, 0444);
  59 MODULE_PARM_DESC(card,     "card type");
  60
  61 /* Bitmask marking allocated devices from 0 to EM28XX_MAXBOARDS */
  62 static unsigned long em28xx_devused;
  63
  64 struct em28xx_hash_table {
  65         unsigned long hash;
  66         unsigned int  model;
  67         unsigned int  tuner;
  68 };
  69
  70 /*
  71  *  Reset sequences for analog/digital modes
  72  */
  73
  74 /* Reset for the most [analog] boards */
  75 static struct em28xx_reg_seq default_analog[] = {
  76         {EM28XX_R08_GPIO,       0x6d,   ~EM_GPIO_4,     10},
  77         {       -1,             -1,     -1,             -1},
  78 };
  79
  80 /* Reset for the most [digital] boards */
  81 static struct em28xx_reg_seq default_digital[] = {
  82         {EM28XX_R08_GPIO,       0x6e,   ~EM_GPIO_4,     10},
  83         {       -1,             -1,     -1,             -1},
  84 };
  85
  86 /* Board Hauppauge WinTV HVR 900 analog */
  87 static struct em28xx_reg_seq hauppauge_wintv_hvr_900_analog[] = {
  88         {EM28XX_R08_GPIO,       0x2d,   ~EM_GPIO_4,     10},
  89         {0x05,                  0xff,   0x10,           10},
  90         {  -1,                  -1,     -1,             -1},
  91 };
  92
  93 /* Board Hauppauge WinTV HVR 900 digital */
  94 static struct em28xx_reg_seq hauppauge_wintv_hvr_900_digital[] = {
  95         {EM28XX_R08_GPIO,       0x2e,   ~EM_GPIO_4,     10},
  96         {EM2880_R04_GPO,        0x04,   0x0f,           10},
  97         {EM2880_R04_GPO,        0x0c,   0x0f,           10},
  98         { -1,                   -1,     -1,             -1},
  99 };
 100
 101 /* Boards - EM2880 MSI DIGIVOX AD and EM2880_BOARD_MSI_DIGIVOX_AD_II */
 102 static struct em28xx_reg_seq em2880_msi_digivox_ad_analog[] = {
 103         {EM28XX_R08_GPIO,       0x69,   ~EM_GPIO_4,      10},
 104         {       -1,             -1,     -1,              -1},
 105 };
 106
 107 /* Boards - EM2880 MSI DIGIVOX AD and EM2880_BOARD_MSI_DIGIVOX_AD_II */
 108
 109 /* Board  - EM2870 Kworld 355u
 110    Analog - No input analog */
 111
 112 /* Board - EM2882 Kworld 315U digital */
 113 static struct em28xx_reg_seq em2882_kworld_315u_digital[] = {
 114         {EM28XX_R08_GPIO,       0xff,   0xff,           10},
 115         {EM28XX_R08_GPIO,       0xfe,   0xff,           10},
 116         {EM2880_R04_GPO,        0x04,   0xff,           10},
 117         {EM2880_R04_GPO,        0x0c,   0xff,           10},
 118         {EM28XX_R08_GPIO,       0x7e,   0xff,           10},
 119         {  -1,                  -1,     -1,             -1},
 120 };
 121
 122 static struct em28xx_reg_seq em2882_kworld_315u_tuner_gpio[] = {
 123         {EM2880_R04_GPO,        0x08,   0xff,           10},
 124         {EM2880_R04_GPO,        0x0c,   0xff,           10},
 125         {EM2880_R04_GPO,        0x08,   0xff,           10},
 126         {EM2880_R04_GPO,        0x0c,   0xff,           10},
 127         {  -1,                  -1,     -1,             -1},
 128 };
 129
 130 static struct em28xx_reg_seq kworld_330u_analog[] = {
 131         {EM28XX_R08_GPIO,       0x6d,   ~EM_GPIO_4,     10},
 132         {EM2880_R04_GPO,        0x00,   0xff,           10},
 133         { -1,                   -1,     -1,             -1},
 134 };
 135
 136 static struct em28xx_reg_seq kworld_330u_digital[] = {
 137         {EM28XX_R08_GPIO,       0x6e,   ~EM_GPIO_4,     10},
 138         {EM2880_R04_GPO,        0x08,   0xff,           10},
 139         { -1,                   -1,     -1,             -1},
 140 };
 141
 142 /* Evga inDtube
 143    GPIO0 - Enable digital power (s5h1409) - low to enable
 144    GPIO1 - Enable analog power (tvp5150/emp202) - low to enable
 145    GPIO4 - xc3028 reset
 146    GOP3  - s5h1409 reset
 147  */
 148 static struct em28xx_reg_seq evga_indtube_analog[] = {
 149         {EM28XX_R08_GPIO,       0x79,   0xff,           60},
 150         {       -1,             -1,     -1,             -1},
 151 };
 152
 153 static struct em28xx_reg_seq evga_indtube_digital[] = {
 154         {EM28XX_R08_GPIO,       0x7a,   0xff,            1},
 155         {EM2880_R04_GPO,        0x04,   0xff,           10},
 156         {EM2880_R04_GPO,        0x0c,   0xff,            1},
 157         { -1,                   -1,     -1,             -1},
 158 };
 159
 160 /* Pinnacle Hybrid Pro eb1a:2881 */
 161 static struct em28xx_reg_seq pinnacle_hybrid_pro_analog[] = {
 162         {EM28XX_R08_GPIO,       0xfd,   ~EM_GPIO_4,     10},
 163         {       -1,             -1,     -1,             -1},
 164 };
 165
 166 static struct em28xx_reg_seq pinnacle_hybrid_pro_digital[] = {
 167         {EM28XX_R08_GPIO,       0x6e,   ~EM_GPIO_4,     10},
 168         {EM2880_R04_GPO,        0x04,   0xff,          100},/* zl10353 reset */
 169         {EM2880_R04_GPO,        0x0c,   0xff,            1},
 170         {       -1,             -1,     -1,             -1},
 171 };
 172
 173
 174 /* Callback for the most boards */
 175 static struct em28xx_reg_seq default_tuner_gpio[] = {
 176         {EM28XX_R08_GPIO,       EM_GPIO_4,      EM_GPIO_4,      10},
 177         {EM28XX_R08_GPIO,       0,              EM_GPIO_4,      10},
 178         {EM28XX_R08_GPIO,       EM_GPIO_4,      EM_GPIO_4,      10},
 179         {  -1,                  -1,             -1,             -1},
 180 };
 181
 182 /* Mute/unmute */
 183 static struct em28xx_reg_seq compro_unmute_tv_gpio[] = {
 184         {EM28XX_R08_GPIO,       5,              7,              10},
 185         {  -1,                  -1,             -1,             -1},
 186 };
 187
 188 static struct em28xx_reg_seq compro_unmute_svid_gpio[] = {
 189         {EM28XX_R08_GPIO,       4,              7,              10},
 190         {  -1,                  -1,             -1,             -1},
 191 };
 192
 193 static struct em28xx_reg_seq compro_mute_gpio[] = {
 194         {EM28XX_R08_GPIO,       6,              7,              10},
 195         {  -1,                  -1,             -1,             -1},
 196 };
 197
 198 /* Terratec AV350 */
 199 static struct em28xx_reg_seq terratec_av350_mute_gpio[] = {
 200         {EM28XX_R08_GPIO,       0xff,   0x7f,           10},
 201         {       -1,             -1,     -1,             -1},
 202 };
 203
 204 static struct em28xx_reg_seq terratec_av350_unmute_gpio[] = {
 205         {EM28XX_R08_GPIO,       0xff,   0xff,           10},
 206         {       -1,             -1,     -1,             -1},
 207 };
 208
 209 static struct em28xx_reg_seq silvercrest_reg_seq[] = {
 210         {EM28XX_R08_GPIO,       0xff,   0xff,           10},
 211         {EM28XX_R08_GPIO,       0x01,   0xf7,           10},
 212         {       -1,             -1,     -1,             -1},
 213 };
 214
 215 /*
 216  *  Board definitions
 217  */
 218 struct em28xx_board em28xx_boards[] = {
 219         [EM2750_BOARD_UNKNOWN] = {
 220                 .name          = "EM2710/EM2750/EM2751 webcam grabber",
 221                 .xclk          = EM28XX_XCLK_FREQUENCY_48MHZ,
 222                 .tuner_type    = TUNER_ABSENT,
 223                 .is_webcam     = 1,
 224                 .input         = { {
 225                         .type     = EM28XX_VMUX_COMPOSITE1,
 226                         .vmux     = 0,
 227                         .amux     = EM28XX_AMUX_VIDEO,
 228                         .gpio     = silvercrest_reg_seq,
 229                 } },
 230         },
 231         [EM2800_BOARD_UNKNOWN] = {
 232                 .name         = "Unknown EM2800 video grabber",
 233                 .is_em2800    = 1,
 234                 .tda9887_conf = TDA9887_PRESENT,
 235                 .decoder      = EM28XX_SAA711X,
 236                 .tuner_type   = TUNER_ABSENT,
 237                 .input        = { {
 238                         .type     = EM28XX_VMUX_COMPOSITE1,
 239                         .vmux     = SAA7115_COMPOSITE0,
 240                         .amux     = EM28XX_AMUX_LINE_IN,
 241                 }, {
 242                         .type     = EM28XX_VMUX_SVIDEO,
 243                         .vmux     = SAA7115_SVIDEO3,
 244                         .amux     = EM28XX_AMUX_LINE_IN,
 245                 } },
 246         },
 247         [EM2820_BOARD_UNKNOWN] = {
 248                 .name          = "Unknown EM2750/28xx video grabber",
 249                 .tuner_type    = TUNER_ABSENT,
 250                 .is_webcam     = 1,     /* To enable sensor probe */
 251         },
 252         [EM2750_BOARD_DLCW_130] = {
 253                 /* Beijing Huaqi Information Digital Technology Co., Ltd */
 254                 .name          = "Huaqi DLCW-130",
 255                 .valid         = EM28XX_BOARD_NOT_VALIDATED,
 256                 .xclk          = EM28XX_XCLK_FREQUENCY_48MHZ,
 257                 .tuner_type    = TUNER_ABSENT,
 258                 .is_webcam     = 1,
 259                 .input         = { {
 260                         .type     = EM28XX_VMUX_COMPOSITE1,
 261                         .vmux     = 0,
 262                         .amux     = EM28XX_AMUX_VIDEO,
 263                 } },
 264         },
 265         [EM2820_BOARD_KWORLD_PVRTV2800RF] = {
 266                 .name         = "Kworld PVR TV 2800 RF",
 267                 .tuner_type   = TUNER_TEMIC_PAL,
 268                 .tda9887_conf = TDA9887_PRESENT,
 269                 .decoder      = EM28XX_SAA711X,
 270                 .input        = { {
 271                         .type     = EM28XX_VMUX_COMPOSITE1,
 272                         .vmux     = SAA7115_COMPOSITE0,
 273                         .amux     = EM28XX_AMUX_LINE_IN,
 274                 }, {
 275                         .type     = EM28XX_VMUX_SVIDEO,
 276                         .vmux     = SAA7115_SVIDEO3,
 277                         .amux     = EM28XX_AMUX_LINE_IN,
 278                 } },
 279         },
 280         [EM2820_BOARD_GADMEI_TVR200] = {
 281                 .name         = "Gadmei TVR200",
 282                 .tuner_type   = TUNER_LG_PAL_NEW_TAPC,
 283                 .tda9887_conf = TDA9887_PRESENT,
 284                 .decoder      = EM28XX_SAA711X,
 285                 .input        = { {
 286                         .type     = EM28XX_VMUX_TELEVISION,
 287                         .vmux     = SAA7115_COMPOSITE2,
 288                         .amux     = EM28XX_AMUX_LINE_IN,
 289                 }, {
 290                         .type     = EM28XX_VMUX_COMPOSITE1,
 291                         .vmux     = SAA7115_COMPOSITE0,
 292                         .amux     = EM28XX_AMUX_LINE_IN,
 293                 }, {
 294                         .type     = EM28XX_VMUX_SVIDEO,
 295                         .vmux     = SAA7115_SVIDEO3,
 296                         .amux     = EM28XX_AMUX_LINE_IN,
 297                 } },
 298         },
 299         [EM2820_BOARD_TERRATEC_CINERGY_250] = {
 300                 .name         = "Terratec Cinergy 250 USB",
 301                 .tuner_type   = TUNER_LG_PAL_NEW_TAPC,
 302                 .tda9887_conf = TDA9887_PRESENT,
 303                 .decoder      = EM28XX_SAA711X,
 304                 .input        = { {
 305                         .type     = EM28XX_VMUX_TELEVISION,
 306                         .vmux     = SAA7115_COMPOSITE2,
 307                         .amux     = EM28XX_AMUX_LINE_IN,
 308                 }, {
 309                         .type     = EM28XX_VMUX_COMPOSITE1,
 310                         .vmux     = SAA7115_COMPOSITE0,
 311                         .amux     = EM28XX_AMUX_LINE_IN,
 312                 }, {
 313                         .type     = EM28XX_VMUX_SVIDEO,
 314                         .vmux     = SAA7115_SVIDEO3,
 315                         .amux     = EM28XX_AMUX_LINE_IN,
 316                 } },
 317         },
 318         [EM2820_BOARD_PINNACLE_USB_2] = {
 319                 .name         = "Pinnacle PCTV USB 2",
 320                 .tuner_type   = TUNER_LG_PAL_NEW_TAPC,
 321                 .tda9887_conf = TDA9887_PRESENT,
 322                 .decoder      = EM28XX_SAA711X,
 323                 .input        = { {
 324                         .type     = EM28XX_VMUX_TELEVISION,
 325                         .vmux     = SAA7115_COMPOSITE2,
 326                         .amux     = EM28XX_AMUX_VIDEO,
 327                 }, {
 328                         .type     = EM28XX_VMUX_COMPOSITE1,
 329                         .vmux     = SAA7115_COMPOSITE0,
 330                         .amux     = EM28XX_AMUX_LINE_IN,
 331                 }, {
 332                         .type     = EM28XX_VMUX_SVIDEO,
 333                         .vmux     = SAA7115_SVIDEO3,
 334                         .amux     = EM28XX_AMUX_LINE_IN,
 335                 } },
 336         },
 337         [EM2820_BOARD_HAUPPAUGE_WINTV_USB_2] = {
 338                 .name         = "Hauppauge WinTV USB 2",
 339                 .tuner_type   = TUNER_PHILIPS_FM1236_MK3,
 340                 .tda9887_conf = TDA9887_PRESENT |
 341                                 TDA9887_PORT1_ACTIVE |
 342                                 TDA9887_PORT2_ACTIVE,
 343                 .decoder      = EM28XX_TVP5150,
 344                 .has_msp34xx  = 1,
 345                 .input        = { {
 346                         .type     = EM28XX_VMUX_TELEVISION,
 347                         .vmux     = TVP5150_COMPOSITE0,
 348                         .amux     = MSP_INPUT_DEFAULT,
 349                 }, {
 350                         .type     = EM28XX_VMUX_SVIDEO,
 351                         .vmux     = TVP5150_SVIDEO,
 352                         .amux     = MSP_INPUT(MSP_IN_SCART1, MSP_IN_TUNER1,
 353                                         MSP_DSP_IN_SCART, MSP_DSP_IN_SCART),
 354                 } },
 355         },
 356         [EM2820_BOARD_DLINK_USB_TV] = {
 357                 .name         = "D-Link DUB-T210 TV Tuner",
 358                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 359                 .tuner_type   = TUNER_LG_PAL_NEW_TAPC,
 360                 .tda9887_conf = TDA9887_PRESENT,
 361                 .decoder      = EM28XX_SAA711X,
 362                 .input        = { {
 363                         .type     = EM28XX_VMUX_TELEVISION,
 364                         .vmux     = SAA7115_COMPOSITE2,
 365                         .amux     = EM28XX_AMUX_LINE_IN,
 366                 }, {
 367                         .type     = EM28XX_VMUX_COMPOSITE1,
 368                         .vmux     = SAA7115_COMPOSITE0,
 369                         .amux     = EM28XX_AMUX_LINE_IN,
 370                 }, {
 371                         .type     = EM28XX_VMUX_SVIDEO,
 372                         .vmux     = SAA7115_SVIDEO3,
 373                         .amux     = EM28XX_AMUX_LINE_IN,
 374                 } },
 375         },
 376         [EM2820_BOARD_HERCULES_SMART_TV_USB2] = {
 377                 .name         = "Hercules Smart TV USB 2.0",
 378                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 379                 .tuner_type   = TUNER_LG_PAL_NEW_TAPC,
 380                 .tda9887_conf = TDA9887_PRESENT,
 381                 .decoder      = EM28XX_SAA711X,
 382                 .input        = { {
 383                         .type     = EM28XX_VMUX_TELEVISION,
 384                         .vmux     = SAA7115_COMPOSITE2,
 385                         .amux     = EM28XX_AMUX_LINE_IN,
 386                 }, {
 387                         .type     = EM28XX_VMUX_COMPOSITE1,
 388                         .vmux     = SAA7115_COMPOSITE0,
 389                         .amux     = EM28XX_AMUX_LINE_IN,
 390                 }, {
 391                         .type     = EM28XX_VMUX_SVIDEO,
 392                         .vmux     = SAA7115_SVIDEO3,
 393                         .amux     = EM28XX_AMUX_LINE_IN,
 394                 } },
 395         },
 396         [EM2820_BOARD_PINNACLE_USB_2_FM1216ME] = {
 397                 .name         = "Pinnacle PCTV USB 2 (Philips FM1216ME)",
 398                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 399                 .tuner_type   = TUNER_PHILIPS_FM1216ME_MK3,
 400                 .tda9887_conf = TDA9887_PRESENT,
 401                 .decoder      = EM28XX_SAA711X,
 402                 .input        = { {
 403                         .type     = EM28XX_VMUX_TELEVISION,
 404                         .vmux     = SAA7115_COMPOSITE2,
 405                         .amux     = EM28XX_AMUX_VIDEO,
 406                 }, {
 407                         .type     = EM28XX_VMUX_COMPOSITE1,
 408                         .vmux     = SAA7115_COMPOSITE0,
 409                         .amux     = EM28XX_AMUX_LINE_IN,
 410                 }, {
 411                         .type     = EM28XX_VMUX_SVIDEO,
 412                         .vmux     = SAA7115_SVIDEO3,
 413                         .amux     = EM28XX_AMUX_LINE_IN,
 414                 } },
 415         },
 416         [EM2820_BOARD_GADMEI_UTV310] = {
 417                 .name         = "Gadmei UTV310",
 418                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 419                 .tuner_type   = TUNER_TNF_5335MF,
 420                 .tda9887_conf = TDA9887_PRESENT,
 421                 .decoder      = EM28XX_SAA711X,
 422                 .input        = { {
 423                         .type     = EM28XX_VMUX_TELEVISION,
 424                         .vmux     = SAA7115_COMPOSITE1,
 425                         .amux     = EM28XX_AMUX_LINE_IN,
 426                 }, {
 427                         .type     = EM28XX_VMUX_COMPOSITE1,
 428                         .vmux     = SAA7115_COMPOSITE0,
 429                         .amux     = EM28XX_AMUX_LINE_IN,
 430                 }, {
 431                         .type     = EM28XX_VMUX_SVIDEO,
 432                         .vmux     = SAA7115_SVIDEO3,
 433                         .amux     = EM28XX_AMUX_LINE_IN,
 434                 } },
 435         },
 436         [EM2820_BOARD_LEADTEK_WINFAST_USBII_DELUXE] = {
 437                 .name         = "Leadtek Winfast USB II Deluxe",
 438                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 439                 .tuner_type   = TUNER_PHILIPS_FM1216ME_MK3,
 440                 .tda9887_conf = TDA9887_PRESENT,
 441                 .decoder      = EM28XX_SAA711X,
 442                 .input        = { {
 443                         .type     = EM28XX_VMUX_TELEVISION,
 444                         .vmux     = SAA7115_COMPOSITE2,
 445                         .amux     = EM28XX_AMUX_VIDEO,
 446                 }, {
 447                         .type     = EM28XX_VMUX_COMPOSITE1,
 448                         .vmux     = SAA7115_COMPOSITE0,
 449                         .amux     = EM28XX_AMUX_LINE_IN,
 450                 }, {
 451                         .type     = EM28XX_VMUX_SVIDEO,
 452                         .vmux     = SAA7115_COMPOSITE0,
 453                         .amux     = EM28XX_AMUX_LINE_IN,
 454                 } },
 455         },
 456         [EM2820_BOARD_VIDEOLOGY_20K14XUSB] = {
 457                 .name         = "Videology 20K14XUSB USB2.0",
 458                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 459                 .tuner_type   = TUNER_ABSENT,
 460                 .is_webcam    = 1,
 461                 .input        = { {
 462                         .type     = EM28XX_VMUX_COMPOSITE1,
 463                         .vmux     = 0,
 464                         .amux     = EM28XX_AMUX_VIDEO,
 465                 } },
 466         },
 467         [EM2820_BOARD_SILVERCREST_WEBCAM] = {
 468                 .name         = "Silvercrest Webcam 1.3mpix",
 469                 .tuner_type   = TUNER_ABSENT,
 470                 .is_webcam    = 1,
 471                 .input        = { {
 472                         .type     = EM28XX_VMUX_COMPOSITE1,
 473                         .vmux     = 0,
 474                         .amux     = EM28XX_AMUX_VIDEO,
 475                         .gpio     = silvercrest_reg_seq,
 476                 } },
 477         },
 478         [EM2821_BOARD_SUPERCOMP_USB_2] = {
 479                 .name         = "Supercomp USB 2.0 TV",
 480                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 481                 .tuner_type   = TUNER_PHILIPS_FM1236_MK3,
 482                 .tda9887_conf = TDA9887_PRESENT |
 483                                 TDA9887_PORT1_ACTIVE |
 484                                 TDA9887_PORT2_ACTIVE,
 485                 .decoder      = EM28XX_SAA711X,
 486                 .input        = { {
 487                         .type     = EM28XX_VMUX_TELEVISION,
 488                         .vmux     = SAA7115_COMPOSITE2,
 489                         .amux     = EM28XX_AMUX_LINE_IN,
 490                 }, {
 491                         .type     = EM28XX_VMUX_COMPOSITE1,
 492                         .vmux     = SAA7115_COMPOSITE0,
 493                         .amux     = EM28XX_AMUX_VIDEO,
 494                 }, {
 495                         .type     = EM28XX_VMUX_SVIDEO,
 496                         .vmux     = SAA7115_SVIDEO3,
 497                         .amux     = EM28XX_AMUX_LINE_IN,
 498                 } },
 499         },
 500         [EM2821_BOARD_USBGEAR_VD204] = {
 501                 .name         = "Usbgear VD204v9",
 502                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 503                 .tuner_type   = TUNER_ABSENT,   /* Capture only device */
 504                 .decoder      = EM28XX_SAA711X,
 505                 .input        = { {
 506                         .type  = EM28XX_VMUX_COMPOSITE1,
 507                         .vmux  = SAA7115_COMPOSITE0,
 508                         .amux  = EM28XX_AMUX_LINE_IN,
 509                 }, {
 510                         .type  = EM28XX_VMUX_SVIDEO,
 511                         .vmux  = SAA7115_SVIDEO3,
 512                         .amux  = EM28XX_AMUX_LINE_IN,
 513                 } },
 514         },
 515         [EM2860_BOARD_NETGMBH_CAM] = {
 516                 /* Beijing Huaqi Information Digital Technology Co., Ltd */
 517                 .name         = "NetGMBH Cam",
 518                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 519                 .tuner_type   = TUNER_ABSENT,
 520                 .is_webcam    = 1,
 521                 .input        = { {
 522                         .type     = EM28XX_VMUX_COMPOSITE1,
 523                         .vmux     = 0,
 524                         .amux     = EM28XX_AMUX_VIDEO,
 525                 } },
 526         },
 527         [EM2860_BOARD_TYPHOON_DVD_MAKER] = {
 528                 .name         = "Typhoon DVD Maker",
 529                 .decoder      = EM28XX_SAA711X,
 530                 .tuner_type   = TUNER_ABSENT,   /* Capture only device */
 531                 .input        = { {
 532                         .type  = EM28XX_VMUX_COMPOSITE1,
 533                         .vmux  = SAA7115_COMPOSITE0,
 534                         .amux  = EM28XX_AMUX_LINE_IN,
 535                 }, {
 536                         .type  = EM28XX_VMUX_SVIDEO,
 537                         .vmux  = SAA7115_SVIDEO3,
 538                         .amux  = EM28XX_AMUX_LINE_IN,
 539                 } },
 540         },
 541         [EM2860_BOARD_GADMEI_UTV330] = {
 542                 .name         = "Gadmei UTV330",
 543                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 544                 .tuner_type   = TUNER_TNF_5335MF,
 545                 .tda9887_conf = TDA9887_PRESENT,
 546                 .decoder      = EM28XX_SAA711X,
 547                 .input        = { {
 548                         .type     = EM28XX_VMUX_TELEVISION,
 549                         .vmux     = SAA7115_COMPOSITE2,
 550                         .amux     = EM28XX_AMUX_VIDEO,
 551                 }, {
 552                         .type     = EM28XX_VMUX_COMPOSITE1,
 553                         .vmux     = SAA7115_COMPOSITE0,
 554                         .amux     = EM28XX_AMUX_LINE_IN,
 555                 }, {
 556                         .type     = EM28XX_VMUX_SVIDEO,
 557                         .vmux     = SAA7115_SVIDEO3,
 558                         .amux     = EM28XX_AMUX_LINE_IN,
 559                 } },
 560         },
 561         [EM2860_BOARD_TERRATEC_HYBRID_XS] = {
 562                 .name         = "Terratec Cinergy A Hybrid XS",
 563                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 564                 .tuner_type   = TUNER_XC2028,
 565                 .tuner_gpio   = default_tuner_gpio,
 566                 .decoder      = EM28XX_TVP5150,
 567
 568                 .input        = { {
 569                         .type     = EM28XX_VMUX_TELEVISION,
 570                         .vmux     = TVP5150_COMPOSITE0,
 571                         .amux     = EM28XX_AMUX_VIDEO,
 572                         .gpio     = hauppauge_wintv_hvr_900_analog,
 573                 }, {
 574                         .type     = EM28XX_VMUX_COMPOSITE1,
 575                         .vmux     = TVP5150_COMPOSITE1,
 576                         .amux     = EM28XX_AMUX_LINE_IN,
 577                         .gpio     = hauppauge_wintv_hvr_900_analog,
 578                 }, {
 579                         .type     = EM28XX_VMUX_SVIDEO,
 580                         .vmux     = TVP5150_SVIDEO,
 581                         .amux     = EM28XX_AMUX_LINE_IN,
 582                         .gpio     = hauppauge_wintv_hvr_900_analog,
 583                 } },
 584         },
 585         [EM2861_BOARD_KWORLD_PVRTV_300U] = {
 586                 .name         = "KWorld PVRTV 300U",
 587                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 588                 .tuner_type   = TUNER_XC2028,
 589                 .tuner_gpio   = default_tuner_gpio,
 590                 .decoder      = EM28XX_TVP5150,
 591                 .input        = { {
 592                         .type     = EM28XX_VMUX_TELEVISION,
 593                         .vmux     = TVP5150_COMPOSITE0,
 594                         .amux     = EM28XX_AMUX_VIDEO,
 595                 }, {
 596                         .type     = EM28XX_VMUX_COMPOSITE1,
 597                         .vmux     = TVP5150_COMPOSITE1,
 598                         .amux     = EM28XX_AMUX_LINE_IN,
 599                 }, {
 600                         .type     = EM28XX_VMUX_SVIDEO,
 601                         .vmux     = TVP5150_SVIDEO,
 602                         .amux     = EM28XX_AMUX_LINE_IN,
 603                 } },
 604         },
 605         [EM2861_BOARD_YAKUMO_MOVIE_MIXER] = {
 606                 .name          = "Yakumo MovieMixer",
 607                 .tuner_type    = TUNER_ABSENT,  /* Capture only device */
 608                 .decoder       = EM28XX_TVP5150,
 609                 .input         = { {
 610                         .type     = EM28XX_VMUX_TELEVISION,
 611                         .vmux     = TVP5150_COMPOSITE0,
 612                         .amux     = EM28XX_AMUX_VIDEO,
 613                 }, {
 614                         .type     = EM28XX_VMUX_COMPOSITE1,
 615                         .vmux     = TVP5150_COMPOSITE1,
 616                         .amux     = EM28XX_AMUX_LINE_IN,
 617                 }, {
 618                         .type     = EM28XX_VMUX_SVIDEO,
 619                         .vmux     = TVP5150_SVIDEO,
 620                         .amux     = EM28XX_AMUX_LINE_IN,
 621                 } },
 622         },
 623         [EM2861_BOARD_PLEXTOR_PX_TV100U] = {
 624                 .name         = "Plextor ConvertX PX-TV100U",
 625                 .tuner_type   = TUNER_TNF_5335MF,
 626                 .xclk         = EM28XX_XCLK_I2S_MSB_TIMING |
 627                                 EM28XX_XCLK_FREQUENCY_12MHZ,
 628                 .tda9887_conf = TDA9887_PRESENT,
 629                 .decoder      = EM28XX_TVP5150,
 630                 .has_msp34xx  = 1,
 631                 .input        = { {
 632                         .type     = EM28XX_VMUX_TELEVISION,
 633                         .vmux     = TVP5150_COMPOSITE0,
 634                         .amux     = EM28XX_AMUX_LINE_IN,
 635                         .gpio     = pinnacle_hybrid_pro_analog,
 636                 }, {
 637                         .type     = EM28XX_VMUX_COMPOSITE1,
 638                         .vmux     = TVP5150_COMPOSITE1,
 639                         .amux     = EM28XX_AMUX_LINE_IN,
 640                         .gpio     = pinnacle_hybrid_pro_analog,
 641                 }, {
 642                         .type     = EM28XX_VMUX_SVIDEO,
 643                         .vmux     = TVP5150_SVIDEO,
 644                         .amux     = EM28XX_AMUX_LINE_IN,
 645                         .gpio     = pinnacle_hybrid_pro_analog,
 646                 } },
 647         },
 648
 649         /* Those boards with em2870 are DVB Only*/
 650
 651         [EM2870_BOARD_TERRATEC_XS] = {
 652                 .name         = "Terratec Cinergy T XS",
 653                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 654                 .tuner_type   = TUNER_XC2028,
 655                 .tuner_gpio   = default_tuner_gpio,
 656         },
 657         [EM2870_BOARD_TERRATEC_XS_MT2060] = {
 658                 .name         = "Terratec Cinergy T XS (MT2060)",
 659                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 660                 .tuner_type   = TUNER_ABSENT, /* MT2060 */
 661         },
 662         [EM2870_BOARD_KWORLD_350U] = {
 663                 .name         = "Kworld 350 U DVB-T",
 664                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 665                 .tuner_type   = TUNER_XC2028,
 666                 .tuner_gpio   = default_tuner_gpio,
 667         },
 668         [EM2870_BOARD_KWORLD_355U] = {
 669                 .name         = "Kworld 355 U DVB-T",
 670                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 671         },
 672         [EM2870_BOARD_PINNACLE_PCTV_DVB] = {
 673                 .name         = "Pinnacle PCTV DVB-T",
 674                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 675                 .tuner_type   = TUNER_ABSENT, /* MT2060 */
 676                 /* djh - I have serious doubts this is right... */
 677                 .xclk         = EM28XX_XCLK_IR_RC5_MODE |
 678                                 EM28XX_XCLK_FREQUENCY_10MHZ,
 679         },
 680         [EM2870_BOARD_COMPRO_VIDEOMATE] = {
 681                 .name         = "Compro, VideoMate U3",
 682                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 683                 .tuner_type   = TUNER_ABSENT, /* MT2060 */
 684         },
 685
 686         [EM2880_BOARD_TERRATEC_HYBRID_XS_FR] = {
 687                 .name         = "Terratec Hybrid XS Secam",
 688                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 689                 .has_msp34xx  = 1,
 690                 .tuner_type   = TUNER_XC2028,
 691                 .tuner_gpio   = default_tuner_gpio,
 692                 .decoder      = EM28XX_TVP5150,
 693                 .input        = { {
 694                         .type     = EM28XX_VMUX_TELEVISION,
 695                         .vmux     = TVP5150_COMPOSITE0,
 696                         .amux     = EM28XX_AMUX_VIDEO,
 697                         .gpio     = default_analog,
 698                 }, {
 699                         .type     = EM28XX_VMUX_COMPOSITE1,
 700                         .vmux     = TVP5150_COMPOSITE1,
 701                         .amux     = EM28XX_AMUX_LINE_IN,
 702                         .gpio     = default_analog,
 703                 }, {
 704                         .type     = EM28XX_VMUX_SVIDEO,
 705                         .vmux     = TVP5150_SVIDEO,
 706                         .amux     = EM28XX_AMUX_LINE_IN,
 707                         .gpio     = default_analog,
 708                 } },
 709         },
 710         [EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900] = {
 711                 .name         = "Hauppauge WinTV HVR 900",
 712                 .tda9887_conf = TDA9887_PRESENT,
 713                 .tuner_type   = TUNER_XC2028,
 714                 .tuner_gpio   = default_tuner_gpio,
 715                 .mts_firmware = 1,
 716                 .has_dvb      = 1,
 717                 .dvb_gpio     = hauppauge_wintv_hvr_900_digital,
 718                 .ir_codes     = ir_codes_hauppauge_new,
 719                 .decoder      = EM28XX_TVP5150,
 720                 .input        = { {
 721                         .type     = EM28XX_VMUX_TELEVISION,
 722                         .vmux     = TVP5150_COMPOSITE0,
 723                         .amux     = EM28XX_AMUX_VIDEO,
 724                         .gpio     = hauppauge_wintv_hvr_900_analog,
 725                 }, {
 726                         .type     = EM28XX_VMUX_COMPOSITE1,
 727                         .vmux     = TVP5150_COMPOSITE1,
 728                         .amux     = EM28XX_AMUX_LINE_IN,
 729                         .gpio     = hauppauge_wintv_hvr_900_analog,
 730                 }, {
 731                         .type     = EM28XX_VMUX_SVIDEO,
 732                         .vmux     = TVP5150_SVIDEO,
 733                         .amux     = EM28XX_AMUX_LINE_IN,
 734                         .gpio     = hauppauge_wintv_hvr_900_analog,
 735                 } },
 736         },
 737         [EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2] = {
 738                 .name         = "Hauppauge WinTV HVR 900 (R2)",
 739                 .tda9887_conf = TDA9887_PRESENT,
 740                 .tuner_type   = TUNER_XC2028,
 741                 .tuner_gpio   = default_tuner_gpio,
 742                 .mts_firmware = 1,
 743                 .ir_codes     = ir_codes_hauppauge_new,
 744                 .decoder      = EM28XX_TVP5150,
 745                 .input        = { {
 746                         .type     = EM28XX_VMUX_TELEVISION,
 747                         .vmux     = TVP5150_COMPOSITE0,
 748                         .amux     = EM28XX_AMUX_VIDEO,
 749                         .gpio     = hauppauge_wintv_hvr_900_analog,
 750                 }, {
 751                         .type     = EM28XX_VMUX_COMPOSITE1,
 752                         .vmux     = TVP5150_COMPOSITE1,
 753                         .amux     = EM28XX_AMUX_LINE_IN,
 754                         .gpio     = hauppauge_wintv_hvr_900_analog,
 755                 }, {
 756                         .type     = EM28XX_VMUX_SVIDEO,
 757                         .vmux     = TVP5150_SVIDEO,
 758                         .amux     = EM28XX_AMUX_LINE_IN,
 759                         .gpio     = hauppauge_wintv_hvr_900_analog,
 760                 } },
 761         },
 762         [EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850] = {
 763                 .name           = "Hauppauge WinTV HVR 850",
 764                 .tuner_type     = TUNER_XC2028,
 765                 .tuner_gpio     = default_tuner_gpio,
 766                 .mts_firmware   = 1,
 767                 .has_dvb        = 1,
 768                 .dvb_gpio       = hauppauge_wintv_hvr_900_digital,
 769                 .ir_codes       = ir_codes_hauppauge_new,
 770                 .decoder        = EM28XX_TVP5150,
 771                 .input          = { {
 772                         .type     = EM28XX_VMUX_TELEVISION,
 773                         .vmux     = TVP5150_COMPOSITE0,
 774                         .amux     = EM28XX_AMUX_VIDEO,
 775                         .gpio     = hauppauge_wintv_hvr_900_analog,
 776                 }, {
 777                         .type     = EM28XX_VMUX_COMPOSITE1,
 778                         .vmux     = TVP5150_COMPOSITE1,
 779                         .amux     = EM28XX_AMUX_LINE_IN,
 780                         .gpio     = hauppauge_wintv_hvr_900_analog,
 781                 }, {
 782                         .type     = EM28XX_VMUX_SVIDEO,
 783                         .vmux     = TVP5150_SVIDEO,
 784                         .amux     = EM28XX_AMUX_LINE_IN,
 785                         .gpio     = hauppauge_wintv_hvr_900_analog,
 786                 } },
 787         },
 788         [EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950] = {
 789                 .name           = "Hauppauge WinTV HVR 950",
 790                 .tuner_type     = TUNER_XC2028,
 791                 .tuner_gpio     = default_tuner_gpio,
 792                 .mts_firmware   = 1,
 793                 .has_dvb        = 1,
 794                 .dvb_gpio       = hauppauge_wintv_hvr_900_digital,
 795                 .ir_codes       = ir_codes_hauppauge_new,
 796                 .decoder        = EM28XX_TVP5150,
 797                 .input          = { {
 798                         .type     = EM28XX_VMUX_TELEVISION,
 799                         .vmux     = TVP5150_COMPOSITE0,
 800                         .amux     = EM28XX_AMUX_VIDEO,
 801                         .gpio     = hauppauge_wintv_hvr_900_analog,
 802                 }, {
 803                         .type     = EM28XX_VMUX_COMPOSITE1,
 804                         .vmux     = TVP5150_COMPOSITE1,
 805                         .amux     = EM28XX_AMUX_LINE_IN,
 806                         .gpio     = hauppauge_wintv_hvr_900_analog,
 807                 }, {
 808                         .type     = EM28XX_VMUX_SVIDEO,
 809                         .vmux     = TVP5150_SVIDEO,
 810                         .amux     = EM28XX_AMUX_LINE_IN,
 811                         .gpio     = hauppauge_wintv_hvr_900_analog,
 812                 } },
 813         },
 814         [EM2880_BOARD_PINNACLE_PCTV_HD_PRO] = {
 815                 .name           = "Pinnacle PCTV HD Pro Stick",
 816                 .tuner_type     = TUNER_XC2028,
 817                 .tuner_gpio   = default_tuner_gpio,
 818                 .mts_firmware   = 1,
 819                 .has_dvb        = 1,
 820                 .dvb_gpio       = hauppauge_wintv_hvr_900_digital,
 821                 .ir_codes       = ir_codes_pinnacle_pctv_hd,
 822                 .decoder        = EM28XX_TVP5150,
 823                 .input          = { {
 824                         .type     = EM28XX_VMUX_TELEVISION,
 825                         .vmux     = TVP5150_COMPOSITE0,
 826                         .amux     = EM28XX_AMUX_VIDEO,
 827                         .gpio     = hauppauge_wintv_hvr_900_analog,
 828                 }, {
 829                         .type     = EM28XX_VMUX_COMPOSITE1,
 830                         .vmux     = TVP5150_COMPOSITE1,
 831                         .amux     = EM28XX_AMUX_LINE_IN,
 832                         .gpio     = hauppauge_wintv_hvr_900_analog,
 833                 }, {
 834                         .type     = EM28XX_VMUX_SVIDEO,
 835                         .vmux     = TVP5150_SVIDEO,
 836                         .amux     = EM28XX_AMUX_LINE_IN,
 837                         .gpio     = hauppauge_wintv_hvr_900_analog,
 838                 } },
 839         },
 840         [EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600] = {
 841                 .name           = "AMD ATI TV Wonder HD 600",
 842                 .tuner_type     = TUNER_XC2028,
 843                 .tuner_gpio     = default_tuner_gpio,
 844                 .mts_firmware   = 1,
 845                 .has_dvb        = 1,
 846                 .dvb_gpio       = hauppauge_wintv_hvr_900_digital,
 847                 .ir_codes       = ir_codes_ati_tv_wonder_hd_600,
 848                 .decoder        = EM28XX_TVP5150,
 849                 .input          = { {
 850                         .type     = EM28XX_VMUX_TELEVISION,
 851                         .vmux     = TVP5150_COMPOSITE0,
 852                         .amux     = EM28XX_AMUX_VIDEO,
 853                         .gpio     = hauppauge_wintv_hvr_900_analog,
 854                 }, {
 855                         .type     = EM28XX_VMUX_COMPOSITE1,
 856                         .vmux     = TVP5150_COMPOSITE1,
 857                         .amux     = EM28XX_AMUX_LINE_IN,
 858                         .gpio     = hauppauge_wintv_hvr_900_analog,
 859                 }, {
 860                         .type     = EM28XX_VMUX_SVIDEO,
 861                         .vmux     = TVP5150_SVIDEO,
 862                         .amux     = EM28XX_AMUX_LINE_IN,
 863                         .gpio     = hauppauge_wintv_hvr_900_analog,
 864                 } },
 865         },
 866         [EM2880_BOARD_TERRATEC_HYBRID_XS] = {
 867                 .name           = "Terratec Hybrid XS",
 868                 .tuner_type     = TUNER_XC2028,
 869                 .tuner_gpio     = default_tuner_gpio,
 870                 .decoder        = EM28XX_TVP5150,
 871                 .has_dvb        = 1,
 872                 .dvb_gpio       = default_digital,
 873                 .input          = { {
 874                         .type     = EM28XX_VMUX_TELEVISION,
 875                         .vmux     = TVP5150_COMPOSITE0,
 876                         .amux     = EM28XX_AMUX_VIDEO,
 877                         .gpio     = default_analog,
 878                 }, {
 879                         .type     = EM28XX_VMUX_COMPOSITE1,
 880                         .vmux     = TVP5150_COMPOSITE1,
 881                         .amux     = EM28XX_AMUX_LINE_IN,
 882                         .gpio     = default_analog,
 883                 }, {
 884                         .type     = EM28XX_VMUX_SVIDEO,
 885                         .vmux     = TVP5150_SVIDEO,
 886                         .amux     = EM28XX_AMUX_LINE_IN,
 887                         .gpio     = default_analog,
 888                 } },
 889         },
 890         /* maybe there's a reason behind it why Terratec sells the Hybrid XS
 891            as Prodigy XS with a different PID, let's keep it separated for now
 892            maybe we'll need it lateron */
 893         [EM2880_BOARD_TERRATEC_PRODIGY_XS] = {
 894                 .name         = "Terratec Prodigy XS",
 895                 .tuner_type   = TUNER_XC2028,
 896                 .tuner_gpio   = default_tuner_gpio,
 897                 .decoder      = EM28XX_TVP5150,
 898                 .input        = { {
 899                         .type     = EM28XX_VMUX_TELEVISION,
 900                         .vmux     = TVP5150_COMPOSITE0,
 901                         .amux     = EM28XX_AMUX_VIDEO,
 902                         .gpio     = hauppauge_wintv_hvr_900_analog,
 903                 }, {
 904                         .type     = EM28XX_VMUX_COMPOSITE1,
 905                         .vmux     = TVP5150_COMPOSITE1,
 906                         .amux     = EM28XX_AMUX_LINE_IN,
 907                         .gpio     = hauppauge_wintv_hvr_900_analog,
 908                 }, {
 909                         .type     = EM28XX_VMUX_SVIDEO,
 910                         .vmux     = TVP5150_SVIDEO,
 911                         .amux     = EM28XX_AMUX_LINE_IN,
 912                         .gpio     = hauppauge_wintv_hvr_900_analog,
 913                 } },
 914         },
 915         [EM2820_BOARD_MSI_VOX_USB_2] = {
 916                 .name              = "MSI VOX USB 2.0",
 917                 .tuner_type        = TUNER_LG_PAL_NEW_TAPC,
 918                 .tda9887_conf      = TDA9887_PRESENT      |
 919                                      TDA9887_PORT1_ACTIVE |
 920                                      TDA9887_PORT2_ACTIVE,
 921                 .max_range_640_480 = 1,
 922                 .decoder           = EM28XX_SAA711X,
 923                 .input             = { {
 924                         .type      = EM28XX_VMUX_TELEVISION,
 925                         .vmux      = SAA7115_COMPOSITE4,
 926                         .amux      = EM28XX_AMUX_VIDEO,
 927                 }, {
 928                         .type      = EM28XX_VMUX_COMPOSITE1,
 929                         .vmux      = SAA7115_COMPOSITE0,
 930                         .amux      = EM28XX_AMUX_LINE_IN,
 931                 }, {
 932                         .type      = EM28XX_VMUX_SVIDEO,
 933                         .vmux      = SAA7115_SVIDEO3,
 934                         .amux      = EM28XX_AMUX_LINE_IN,
 935                 } },
 936         },
 937         [EM2800_BOARD_TERRATEC_CINERGY_200] = {
 938                 .name         = "Terratec Cinergy 200 USB",
 939                 .is_em2800    = 1,
 940                 .tuner_type   = TUNER_LG_PAL_NEW_TAPC,
 941                 .tda9887_conf = TDA9887_PRESENT,
 942                 .decoder      = EM28XX_SAA711X,
 943                 .input        = { {
 944                         .type     = EM28XX_VMUX_TELEVISION,
 945                         .vmux     = SAA7115_COMPOSITE2,
 946                         .amux     = EM28XX_AMUX_VIDEO,
 947                 }, {
 948                         .type     = EM28XX_VMUX_COMPOSITE1,
 949                         .vmux     = SAA7115_COMPOSITE0,
 950                         .amux     = EM28XX_AMUX_LINE_IN,
 951                 }, {
 952                         .type     = EM28XX_VMUX_SVIDEO,
 953                         .vmux     = SAA7115_SVIDEO3,
 954                         .amux     = EM28XX_AMUX_LINE_IN,
 955                 } },
 956         },
 957         [EM2800_BOARD_GRABBEEX_USB2800] = {
 958                 .name       = "eMPIA Technology, Inc. GrabBeeX+ Video Encoder",
 959                 .is_em2800  = 1,
 960                 .decoder    = EM28XX_SAA711X,
 961                 .tuner_type = TUNER_ABSENT, /* capture only board */
 962                 .input      = { {
 963                         .type     = EM28XX_VMUX_COMPOSITE1,
 964                         .vmux     = SAA7115_COMPOSITE0,
 965                         .amux     = EM28XX_AMUX_LINE_IN,
 966                 }, {
 967                         .type     = EM28XX_VMUX_SVIDEO,
 968                         .vmux     = SAA7115_SVIDEO3,
 969                         .amux     = EM28XX_AMUX_LINE_IN,
 970                 } },
 971         },
 972         [EM2800_BOARD_LEADTEK_WINFAST_USBII] = {
 973                 .name         = "Leadtek Winfast USB II",
 974                 .is_em2800    = 1,
 975                 .tuner_type   = TUNER_LG_PAL_NEW_TAPC,
 976                 .tda9887_conf = TDA9887_PRESENT,
 977                 .decoder      = EM28XX_SAA711X,
 978                 .input        = { {
 979                         .type     = EM28XX_VMUX_TELEVISION,
 980                         .vmux     = SAA7115_COMPOSITE2,
 981                         .amux     = EM28XX_AMUX_VIDEO,
 982                 }, {
 983                         .type     = EM28XX_VMUX_COMPOSITE1,
 984                         .vmux     = SAA7115_COMPOSITE0,
 985                         .amux     = EM28XX_AMUX_LINE_IN,
 986                 }, {
 987                         .type     = EM28XX_VMUX_SVIDEO,
 988                         .vmux     = SAA7115_SVIDEO3,
 989                         .amux     = EM28XX_AMUX_LINE_IN,
 990                 } },
 991         },
 992         [EM2800_BOARD_KWORLD_USB2800] = {
 993                 .name         = "Kworld USB2800",
 994                 .is_em2800    = 1,
 995                 .tuner_type   = TUNER_PHILIPS_FCV1236D,
 996                 .tda9887_conf = TDA9887_PRESENT,
 997                 .decoder      = EM28XX_SAA711X,
 998                 .input        = { {
 999                         .type     = EM28XX_VMUX_TELEVISION,
1000                         .vmux     = SAA7115_COMPOSITE2,
1001                         .amux     = EM28XX_AMUX_VIDEO,
1002                 }, {
1003                         .type     = EM28XX_VMUX_COMPOSITE1,
1004                         .vmux     = SAA7115_COMPOSITE0,
1005                         .amux     = EM28XX_AMUX_LINE_IN,
1006                 }, {
1007                         .type     = EM28XX_VMUX_SVIDEO,
1008                         .vmux     = SAA7115_SVIDEO3,
1009                         .amux     = EM28XX_AMUX_LINE_IN,
1010                 } },
1011         },
1012         [EM2820_BOARD_PINNACLE_DVC_90] = {
1013                 .name         = "Pinnacle Dazzle DVC 90/100/101/107 / Kaiser Baas Video to DVD maker",
1014                 .tuner_type   = TUNER_ABSENT, /* capture only board */
1015                 .decoder      = EM28XX_SAA711X,
1016                 .input        = { {
1017                         .type     = EM28XX_VMUX_COMPOSITE1,
1018                         .vmux     = SAA7115_COMPOSITE0,
1019                         .amux     = EM28XX_AMUX_LINE_IN,
1020                 }, {
1021                         .type     = EM28XX_VMUX_SVIDEO,
1022                         .vmux     = SAA7115_SVIDEO3,
1023                         .amux     = EM28XX_AMUX_LINE_IN,
1024                 } },
1025         },
1026         [EM2800_BOARD_VGEAR_POCKETTV] = {
1027                 .name         = "V-Gear PocketTV",
1028                 .is_em2800    = 1,
1029                 .tuner_type   = TUNER_LG_PAL_NEW_TAPC,
1030                 .tda9887_conf = TDA9887_PRESENT,
1031                 .decoder      = EM28XX_SAA711X,
1032                 .input        = { {
1033                         .type     = EM28XX_VMUX_TELEVISION,
1034                         .vmux     = SAA7115_COMPOSITE2,
1035                         .amux     = EM28XX_AMUX_VIDEO,
1036                 }, {
1037                         .type     = EM28XX_VMUX_COMPOSITE1,
1038                         .vmux     = SAA7115_COMPOSITE0,
1039                         .amux     = EM28XX_AMUX_LINE_IN,
1040                 }, {
1041                         .type     = EM28XX_VMUX_SVIDEO,
1042                         .vmux     = SAA7115_SVIDEO3,
1043                         .amux     = EM28XX_AMUX_LINE_IN,
1044                 } },
1045         },
1046         [EM2820_BOARD_PROLINK_PLAYTV_BOX4_USB2] = {
1047                 .name         = "Pixelview PlayTV Box 4 USB 2.0",
1048                 .tda9887_conf = TDA9887_PRESENT,
1049                 .tuner_type   = TUNER_YMEC_TVF_5533MF,
1050                 .decoder      = EM28XX_SAA711X,
1051                 .input        = { {
1052                         .type     = EM28XX_VMUX_TELEVISION,
1053                         .vmux     = SAA7115_COMPOSITE2,
1054                         .amux     = EM28XX_AMUX_VIDEO,
1055                         .aout     = EM28XX_AOUT_MONO |  /* I2S */
1056                                     EM28XX_AOUT_MASTER, /* Line out pin */
1057                 }, {
1058                         .type     = EM28XX_VMUX_COMPOSITE1,
1059                         .vmux     = SAA7115_COMPOSITE0,
1060                         .amux     = EM28XX_AMUX_LINE_IN,
1061                 }, {
1062                         .type     = EM28XX_VMUX_SVIDEO,
1063                         .vmux     = SAA7115_SVIDEO3,
1064                         .amux     = EM28XX_AMUX_LINE_IN,
1065                 } },
1066         },
1067         [EM2820_BOARD_PROLINK_PLAYTV_USB2] = {
1068                 .name         = "SIIG AVTuner-PVR / Pixelview Prolink PlayTV USB 2.0",
1069                 .has_snapshot_button = 1,
1070                 .tda9887_conf = TDA9887_PRESENT,
1071                 .tuner_type   = TUNER_YMEC_TVF_5533MF,
1072                 .decoder      = EM28XX_SAA711X,
1073                 .input        = { {
1074                         .type     = EM28XX_VMUX_TELEVISION,
1075                         .vmux     = SAA7115_COMPOSITE2,
1076                         .amux     = EM28XX_AMUX_VIDEO,
1077                         .aout     = EM28XX_AOUT_MONO |  /* I2S */
1078                                     EM28XX_AOUT_MASTER, /* Line out pin */
1079                 }, {
1080                         .type     = EM28XX_VMUX_COMPOSITE1,
1081                         .vmux     = SAA7115_COMPOSITE0,
1082                         .amux     = EM28XX_AMUX_LINE_IN,
1083                 }, {
1084                         .type     = EM28XX_VMUX_SVIDEO,
1085                         .vmux     = SAA7115_SVIDEO3,
1086                         .amux     = EM28XX_AMUX_LINE_IN,
1087                 } },
1088         },
1089         [EM2860_BOARD_SAA711X_REFERENCE_DESIGN] = {
1090                 .name                = "EM2860/SAA711X Reference Design",
1091                 .has_snapshot_button = 1,
1092                 .tuner_type          = TUNER_ABSENT,
1093                 .decoder             = EM28XX_SAA711X,
1094                 .input               = { {
1095                         .type     = EM28XX_VMUX_SVIDEO,
1096                         .vmux     = SAA7115_SVIDEO3,
1097                 }, {
1098                         .type     = EM28XX_VMUX_COMPOSITE1,
1099                         .vmux     = SAA7115_COMPOSITE0,
1100                 } },
1101         },
1102         [EM2880_BOARD_MSI_DIGIVOX_AD] = {
1103                 .name         = "MSI DigiVox A/D",
1104                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
1105                 .tuner_type   = TUNER_XC2028,
1106                 .tuner_gpio   = default_tuner_gpio,
1107                 .decoder      = EM28XX_TVP5150,
1108                 .input        = { {
1109                         .type     = EM28XX_VMUX_TELEVISION,
1110                         .vmux     = TVP5150_COMPOSITE0,
1111                         .amux     = EM28XX_AMUX_VIDEO,
1112                         .gpio     = em2880_msi_digivox_ad_analog,
1113                 }, {
1114                         .type     = EM28XX_VMUX_COMPOSITE1,
1115                         .vmux     = TVP5150_COMPOSITE1,
1116                         .amux     = EM28XX_AMUX_LINE_IN,
1117                         .gpio     = em2880_msi_digivox_ad_analog,
1118                 }, {
1119                         .type     = EM28XX_VMUX_SVIDEO,
1120                         .vmux     = TVP5150_SVIDEO,
1121                         .amux     = EM28XX_AMUX_LINE_IN,
1122                         .gpio     = em2880_msi_digivox_ad_analog,
1123                 } },
1124         },
1125         [EM2880_BOARD_MSI_DIGIVOX_AD_II] = {
1126                 .name         = "MSI DigiVox A/D II",
1127                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
1128                 .tuner_type   = TUNER_XC2028,
1129                 .tuner_gpio   = default_tuner_gpio,
1130                 .decoder      = EM28XX_TVP5150,
1131                 .input        = { {
1132                         .type     = EM28XX_VMUX_TELEVISION,
1133                         .vmux     = TVP5150_COMPOSITE0,
1134                         .amux     = EM28XX_AMUX_VIDEO,
1135                         .gpio     = em2880_msi_digivox_ad_analog,
1136                 }, {
1137                         .type     = EM28XX_VMUX_COMPOSITE1,
1138                         .vmux     = TVP5150_COMPOSITE1,
1139                         .amux     = EM28XX_AMUX_LINE_IN,
1140                         .gpio     = em2880_msi_digivox_ad_analog,
1141                 }, {
1142                         .type     = EM28XX_VMUX_SVIDEO,
1143                         .vmux     = TVP5150_SVIDEO,
1144                         .amux     = EM28XX_AMUX_LINE_IN,
1145                         .gpio     = em2880_msi_digivox_ad_analog,
1146                 } },
1147         },
1148         [EM2880_BOARD_KWORLD_DVB_305U] = {
1149                 .name         = "KWorld DVB-T 305U",
1150                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
1151                 .tuner_type   = TUNER_XC2028,
1152                 .tuner_gpio   = default_tuner_gpio,
1153                 .decoder      = EM28XX_TVP5150,
1154                 .input        = { {
1155                         .type     = EM28XX_VMUX_TELEVISION,
1156                         .vmux     = TVP5150_COMPOSITE0,
1157                         .amux     = EM28XX_AMUX_VIDEO,
1158                 }, {
1159                         .type     = EM28XX_VMUX_COMPOSITE1,
1160                         .vmux     = TVP5150_COMPOSITE1,
1161                         .amux     = EM28XX_AMUX_LINE_IN,
1162                 }, {
1163                         .type     = EM28XX_VMUX_SVIDEO,
1164                         .vmux     = TVP5150_SVIDEO,
1165                         .amux     = EM28XX_AMUX_LINE_IN,
1166                 } },
1167         },
1168         [EM2880_BOARD_KWORLD_DVB_310U] = {
1169                 .name         = "KWorld DVB-T 310U",
1170                 .tuner_type   = TUNER_XC2028,
1171                 .tuner_gpio   = default_tuner_gpio,
1172                 .has_dvb      = 1,
1173                 .dvb_gpio     = default_digital,
1174                 .mts_firmware = 1,
1175                 .decoder      = EM28XX_TVP5150,
1176                 .input        = { {
1177                         .type     = EM28XX_VMUX_TELEVISION,
1178                         .vmux     = TVP5150_COMPOSITE0,
1179                         .amux     = EM28XX_AMUX_VIDEO,
1180                         .gpio     = default_analog,
1181                 }, {
1182                         .type     = EM28XX_VMUX_COMPOSITE1,
1183                         .vmux     = TVP5150_COMPOSITE1,
1184                         .amux     = EM28XX_AMUX_LINE_IN,
1185                         .gpio     = default_analog,
1186                 }, {    /* S-video has not been tested yet */
1187                         .type     = EM28XX_VMUX_SVIDEO,
1188                         .vmux     = TVP5150_SVIDEO,
1189                         .amux     = EM28XX_AMUX_LINE_IN,
1190                         .gpio     = default_analog,
1191                 } },
1192         },
1193         [EM2882_BOARD_KWORLD_ATSC_315U] = {
1194                 .name           = "KWorld ATSC 315U HDTV TV Box",
1195                 .valid          = EM28XX_BOARD_NOT_VALIDATED,
1196                 .tuner_type     = TUNER_THOMSON_DTT761X,
1197                 .tuner_gpio     = em2882_kworld_315u_tuner_gpio,
1198                 .tda9887_conf   = TDA9887_PRESENT,
1199                 .decoder        = EM28XX_SAA711X,
1200                 .has_dvb        = 1,
1201                 .dvb_gpio       = em2882_kworld_315u_digital,
1202                 .xclk           = EM28XX_XCLK_FREQUENCY_12MHZ,
1203                 .i2c_speed      = EM28XX_I2C_CLK_WAIT_ENABLE,
1204                 /* Analog mode - still not ready */
1205                 /*.input        = { {
1206                         .type = EM28XX_VMUX_TELEVISION,
1207                         .vmux = SAA7115_COMPOSITE2,
1208                         .amux = EM28XX_AMUX_VIDEO,
1209                         .gpio = em2882_kworld_315u_analog,
1210                         .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
1211                 }, {
1212                         .type = EM28XX_VMUX_COMPOSITE1,
1213                         .vmux = SAA7115_COMPOSITE0,
1214                         .amux = EM28XX_AMUX_LINE_IN,
1215                         .gpio = em2882_kworld_315u_analog1,
1216                         .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
1217                 }, {
1218                         .type = EM28XX_VMUX_SVIDEO,
1219                         .vmux = SAA7115_SVIDEO3,
1220                         .amux = EM28XX_AMUX_LINE_IN,
1221                         .gpio = em2882_kworld_315u_analog1,
1222                         .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
1223                 } }, */
1224         },
1225         [EM2880_BOARD_EMPIRE_DUAL_TV] = {
1226                 .name = "Empire dual TV",
1227                 .tuner_type = TUNER_XC2028,
1228                 .tuner_gpio = default_tuner_gpio,
1229                 .has_dvb = 1,
1230                 .dvb_gpio = default_digital,
1231                 .mts_firmware = 1,
1232                 .decoder = EM28XX_TVP5150,
1233                 .input = { {
1234                         .type = EM28XX_VMUX_TELEVISION,
1235                         .vmux = TVP5150_COMPOSITE0,
1236                         .amux = EM28XX_AMUX_VIDEO,
1237                         .gpio = default_analog,
1238                 }, {
1239                         .type = EM28XX_VMUX_COMPOSITE1,
1240                         .vmux = TVP5150_COMPOSITE1,
1241                         .amux = EM28XX_AMUX_LINE_IN,
1242                         .gpio = default_analog,
1243                 }, {
1244                         .type = EM28XX_VMUX_SVIDEO,
1245                         .vmux = TVP5150_SVIDEO,
1246                         .amux = EM28XX_AMUX_LINE_IN,
1247                         .gpio = default_analog,
1248                 } },
1249         },
1250         [EM2881_BOARD_DNT_DA2_HYBRID] = {
1251                 .name         = "DNT DA2 Hybrid",
1252                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
1253                 .tuner_type   = TUNER_XC2028,
1254                 .tuner_gpio   = default_tuner_gpio,
1255                 .decoder      = EM28XX_TVP5150,
1256                 .input        = { {
1257                         .type     = EM28XX_VMUX_TELEVISION,
1258                         .vmux     = TVP5150_COMPOSITE0,
1259                         .amux     = EM28XX_AMUX_VIDEO,
1260                         .gpio     = default_analog,
1261                 }, {
1262                         .type     = EM28XX_VMUX_COMPOSITE1,
1263                         .vmux     = TVP5150_COMPOSITE1,
1264                         .amux     = EM28XX_AMUX_LINE_IN,
1265                         .gpio     = default_analog,
1266                 }, {
1267                         .type     = EM28XX_VMUX_SVIDEO,
1268                         .vmux     = TVP5150_SVIDEO,
1269                         .amux     = EM28XX_AMUX_LINE_IN,
1270                         .gpio     = default_analog,
1271                 } },
1272         },
1273         [EM2881_BOARD_PINNACLE_HYBRID_PRO] = {
1274                 .name         = "Pinnacle Hybrid Pro",
1275                 .tuner_type   = TUNER_XC2028,
1276                 .tuner_gpio   = default_tuner_gpio,
1277                 .decoder      = EM28XX_TVP5150,
1278                 .has_dvb      = 1,
1279                 .dvb_gpio     = pinnacle_hybrid_pro_digital,
1280                 .input        = { {
1281                         .type     = EM28XX_VMUX_TELEVISION,
1282                         .vmux     = TVP5150_COMPOSITE0,
1283                         .amux     = EM28XX_AMUX_VIDEO,
1284                         .gpio     = pinnacle_hybrid_pro_analog,
1285                 }, {
1286                         .type     = EM28XX_VMUX_COMPOSITE1,
1287                         .vmux     = TVP5150_COMPOSITE1,
1288                         .amux     = EM28XX_AMUX_LINE_IN,
1289                         .gpio     = pinnacle_hybrid_pro_analog,
1290                 }, {
1291                         .type     = EM28XX_VMUX_SVIDEO,
1292                         .vmux     = TVP5150_SVIDEO,
1293                         .amux     = EM28XX_AMUX_LINE_IN,
1294                         .gpio     = pinnacle_hybrid_pro_analog,
1295                 } },
1296         },
1297         [EM2882_BOARD_PINNACLE_HYBRID_PRO] = {
1298                 .name         = "Pinnacle Hybrid Pro (2)",
1299                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
1300                 .tuner_type   = TUNER_XC2028,
1301                 .tuner_gpio   = default_tuner_gpio,
1302                 .mts_firmware = 1,
1303                 .decoder      = EM28XX_TVP5150,
1304                 .input        = { {
1305                         .type     = EM28XX_VMUX_TELEVISION,
1306                         .vmux     = TVP5150_COMPOSITE0,
1307                         .amux     = EM28XX_AMUX_VIDEO,
1308                         .gpio     = hauppauge_wintv_hvr_900_analog,
1309                 }, {
1310                         .type     = EM28XX_VMUX_COMPOSITE1,
1311                         .vmux     = TVP5150_COMPOSITE1,
1312                         .amux     = EM28XX_AMUX_LINE_IN,
1313                         .gpio     = hauppauge_wintv_hvr_900_analog,
1314                 }, {
1315                         .type     = EM28XX_VMUX_SVIDEO,
1316                         .vmux     = TVP5150_SVIDEO,
1317                         .amux     = EM28XX_AMUX_LINE_IN,
1318                         .gpio     = hauppauge_wintv_hvr_900_analog,
1319                 } },
1320         },
1321         [EM2882_BOARD_KWORLD_VS_DVBT] = {
1322                 .name         = "Kworld VS-DVB-T 323UR",
1323                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
1324                 .tuner_type   = TUNER_XC2028,
1325                 .tuner_gpio   = default_tuner_gpio,
1326                 .decoder      = EM28XX_TVP5150,
1327                 .input        = { {
1328                         .type     = EM28XX_VMUX_TELEVISION,
1329                         .vmux     = TVP5150_COMPOSITE0,
1330                         .amux     = EM28XX_AMUX_VIDEO,
1331                 }, {
1332                         .type     = EM28XX_VMUX_COMPOSITE1,
1333                         .vmux     = TVP5150_COMPOSITE1,
1334                         .amux     = EM28XX_AMUX_LINE_IN,
1335                 }, {
1336                         .type     = EM28XX_VMUX_SVIDEO,
1337                         .vmux     = TVP5150_SVIDEO,
1338                         .amux     = EM28XX_AMUX_LINE_IN,
1339                 } },
1340         },
1341         [EM2882_BOARD_TERRATEC_HYBRID_XS] = {
1342                 .name         = "Terratec Hybrid XS (em2882)",
1343                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
1344                 .tuner_type   = TUNER_XC2028,
1345                 .tuner_gpio   = default_tuner_gpio,
1346                 .decoder      = EM28XX_TVP5150,
1347                 .input        = { {
1348                         .type     = EM28XX_VMUX_TELEVISION,
1349                         .vmux     = TVP5150_COMPOSITE0,
1350                         .amux     = EM28XX_AMUX_VIDEO,
1351                         .gpio     = hauppauge_wintv_hvr_900_analog,
1352                 }, {
1353                         .type     = EM28XX_VMUX_COMPOSITE1,
1354                         .vmux     = TVP5150_COMPOSITE1,
1355                         .amux     = EM28XX_AMUX_LINE_IN,
1356                         .gpio     = hauppauge_wintv_hvr_900_analog,
1357                 }, {
1358                         .type     = EM28XX_VMUX_SVIDEO,
1359                         .vmux     = TVP5150_SVIDEO,
1360                         .amux     = EM28XX_AMUX_LINE_IN,
1361                         .gpio     = hauppauge_wintv_hvr_900_analog,
1362                 } },
1363         },
1364         [EM2883_BOARD_KWORLD_HYBRID_330U] = {
1365                 .name         = "Kworld PlusTV HD Hybrid 330",
1366                 .tuner_type   = TUNER_XC2028,
1367                 .tuner_gpio   = default_tuner_gpio,
1368                 .decoder      = EM28XX_TVP5150,
1369                 .mts_firmware = 1,
1370                 .has_dvb      = 1,
1371                 .dvb_gpio     = kworld_330u_digital,
1372                 .xclk             = EM28XX_XCLK_FREQUENCY_12MHZ,
1373                 .i2c_speed        = EM28XX_I2C_CLK_WAIT_ENABLE |
1374                                     EM28XX_I2C_EEPROM_ON_BOARD |
1375                                     EM28XX_I2C_EEPROM_KEY_VALID,
1376                 .input        = { {
1377                         .type     = EM28XX_VMUX_TELEVISION,
1378                         .vmux     = TVP5150_COMPOSITE0,
1379                         .amux     = EM28XX_AMUX_VIDEO,
1380                         .gpio     = kworld_330u_analog,
1381                         .aout     = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
1382                 }, {
1383                         .type     = EM28XX_VMUX_COMPOSITE1,
1384                         .vmux     = TVP5150_COMPOSITE1,
1385                         .amux     = EM28XX_AMUX_LINE_IN,
1386                         .gpio     = kworld_330u_analog,
1387                         .aout     = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
1388                 }, {
1389                         .type     = EM28XX_VMUX_SVIDEO,
1390                         .vmux     = TVP5150_SVIDEO,
1391                         .amux     = EM28XX_AMUX_LINE_IN,
1392                         .gpio     = kworld_330u_analog,
1393                 } },
1394         },
1395         [EM2820_BOARD_COMPRO_VIDEOMATE_FORYOU] = {
1396                 .name         = "Compro VideoMate ForYou/Stereo",
1397                 .tuner_type   = TUNER_LG_PAL_NEW_TAPC,
1398                 .tvaudio_addr = 0xb0,
1399                 .tda9887_conf = TDA9887_PRESENT,
1400                 .decoder      = EM28XX_TVP5150,
1401                 .adecoder     = EM28XX_TVAUDIO,
1402                 .mute_gpio    = compro_mute_gpio,
1403                 .input        = { {
1404                         .type     = EM28XX_VMUX_TELEVISION,
1405                         .vmux     = TVP5150_COMPOSITE0,
1406                         .amux     = EM28XX_AMUX_VIDEO,
1407                         .gpio     = compro_unmute_tv_gpio,
1408                 }, {
1409                         .type     = EM28XX_VMUX_SVIDEO,
1410                         .vmux     = TVP5150_SVIDEO,
1411                         .amux     = EM28XX_AMUX_LINE_IN,
1412                         .gpio     = compro_unmute_svid_gpio,
1413                 } },
1414         },
1415         [EM2860_BOARD_KAIOMY_TVNPC_U2] = {
1416                 .name         = "Kaiomy TVnPC U2",
1417                 .vchannels    = 3,
1418                 .tuner_type   = TUNER_XC2028,
1419                 .tuner_addr   = 0x61,
1420                 .mts_firmware = 1,
1421                 .decoder      = EM28XX_TVP5150,
1422                 .tuner_gpio   = default_tuner_gpio,
1423                 .ir_codes     = ir_codes_kaiomy,
1424                 .input          = { {
1425                         .type     = EM28XX_VMUX_TELEVISION,
1426                         .vmux     = TVP5150_COMPOSITE0,
1427                         .amux     = EM28XX_AMUX_VIDEO,
1428
1429                 }, {
1430                         .type     = EM28XX_VMUX_COMPOSITE1,
1431                         .vmux     = TVP5150_COMPOSITE1,
1432                         .amux     = EM28XX_AMUX_LINE_IN,
1433                 }, {
1434                         .type     = EM28XX_VMUX_SVIDEO,
1435                         .vmux     = TVP5150_SVIDEO,
1436                         .amux     = EM28XX_AMUX_LINE_IN,
1437                 } },
1438                 .radio          = {
1439                         .type     = EM28XX_RADIO,
1440                         .amux     = EM28XX_AMUX_LINE_IN,
1441                 }
1442         },
1443         [EM2860_BOARD_EASYCAP] = {
1444                 .name         = "Easy Cap Capture DC-60",
1445                 .vchannels    = 2,
1446                 .tuner_type   = TUNER_ABSENT,
1447                 .decoder      = EM28XX_SAA711X,
1448                 .input           = { {
1449                         .type     = EM28XX_VMUX_COMPOSITE1,
1450                         .vmux     = SAA7115_COMPOSITE0,
1451                         .amux     = EM28XX_AMUX_LINE_IN,
1452                 }, {
1453                         .type     = EM28XX_VMUX_SVIDEO,
1454                         .vmux     = SAA7115_SVIDEO3,
1455                         .amux     = EM28XX_AMUX_LINE_IN,
1456                 } },
1457         },
1458         [EM2820_BOARD_IODATA_GVMVP_SZ] = {
1459                 .name       = "IO-DATA GV-MVP/SZ",
1460                 .tuner_type   = TUNER_PHILIPS_FM1236_MK3,
1461                 .tuner_gpio   = default_tuner_gpio,
1462                 .tda9887_conf = TDA9887_PRESENT,
1463                 .decoder      = EM28XX_TVP5150,
1464                 .input        = { {
1465                         .type     = EM28XX_VMUX_TELEVISION,
1466                         .vmux     = TVP5150_COMPOSITE0,
1467                         .amux     = EM28XX_AMUX_VIDEO,
1468                 }, { /* Composite has not been tested yet */
1469                         .type     = EM28XX_VMUX_COMPOSITE1,
1470                         .vmux     = TVP5150_COMPOSITE1,
1471                         .amux     = EM28XX_AMUX_VIDEO,
1472                 }, { /* S-video has not been tested yet */
1473                         .type     = EM28XX_VMUX_SVIDEO,
1474                         .vmux     = TVP5150_SVIDEO,
1475                         .amux     = EM28XX_AMUX_VIDEO,
1476                 } },
1477         },
1478         [EM2860_BOARD_TERRATEC_GRABBY] = {
1479                 .name            = "Terratec Grabby",
1480                 .vchannels       = 2,
1481                 .tuner_type      = TUNER_ABSENT,
1482                 .decoder         = EM28XX_SAA711X,
1483                 .xclk            = EM28XX_XCLK_FREQUENCY_12MHZ,
1484                 .input           = { {
1485                         .type     = EM28XX_VMUX_COMPOSITE1,
1486                         .vmux     = SAA7115_COMPOSITE0,
1487                         .amux     = EM28XX_AMUX_VIDEO2,
1488                 }, {
1489                         .type     = EM28XX_VMUX_SVIDEO,
1490                         .vmux     = SAA7115_SVIDEO3,
1491                         .amux     = EM28XX_AMUX_VIDEO2,
1492                 } },
1493         },
1494         [EM2860_BOARD_TERRATEC_AV350] = {
1495                 .name            = "Terratec AV350",
1496                 .vchannels       = 2,
1497                 .tuner_type      = TUNER_ABSENT,
1498                 .decoder         = EM28XX_TVP5150,
1499                 .xclk            = EM28XX_XCLK_FREQUENCY_12MHZ,
1500                 .mute_gpio       = terratec_av350_mute_gpio,
1501                 .input           = { {
1502                         .type     = EM28XX_VMUX_COMPOSITE1,
1503                         .vmux     = TVP5150_COMPOSITE1,
1504                         .amux     = EM28XX_AUDIO_SRC_LINE,
1505                         .gpio     = terratec_av350_unmute_gpio,
1506
1507                 }, {
1508                         .type     = EM28XX_VMUX_SVIDEO,
1509                         .vmux     = TVP5150_SVIDEO,
1510                         .amux     = EM28XX_AUDIO_SRC_LINE,
1511                         .gpio     = terratec_av350_unmute_gpio,
1512                 } },
1513         },
1514         [EM2882_BOARD_EVGA_INDTUBE] = {
1515                 .name         = "Evga inDtube",
1516                 .tuner_type   = TUNER_XC2028,
1517                 .tuner_gpio   = default_tuner_gpio,
1518                 .decoder      = EM28XX_TVP5150,
1519                 .xclk         = EM28XX_XCLK_FREQUENCY_12MHZ, /* NEC IR */
1520                 .mts_firmware = 1,
1521                 .has_dvb      = 1,
1522                 .dvb_gpio     = evga_indtube_digital,
1523                 .ir_codes     = ir_codes_evga_indtube,
1524                 .input        = { {
1525                         .type     = EM28XX_VMUX_TELEVISION,
1526                         .vmux     = TVP5150_COMPOSITE0,
1527                         .amux     = EM28XX_AMUX_VIDEO,
1528                         .gpio     = evga_indtube_analog,
1529                 }, {
1530                         .type     = EM28XX_VMUX_COMPOSITE1,
1531                         .vmux     = TVP5150_COMPOSITE1,
1532                         .amux     = EM28XX_AMUX_LINE_IN,
1533                         .gpio     = evga_indtube_analog,
1534                 }, {
1535                         .type     = EM28XX_VMUX_SVIDEO,
1536                         .vmux     = TVP5150_SVIDEO,
1537                         .amux     = EM28XX_AMUX_LINE_IN,
1538                         .gpio     = evga_indtube_analog,
1539                 } },
1540         },
1541 };
1542 const unsigned int em28xx_bcount = ARRAY_SIZE(em28xx_boards);
1543
1544 /* table of devices that work with this driver */
1545 struct usb_device_id em28xx_id_table[] = {
1546         { USB_DEVICE(0xeb1a, 0x2750),
1547                         .driver_info = EM2750_BOARD_UNKNOWN },
1548         { USB_DEVICE(0xeb1a, 0x2751),
1549                         .driver_info = EM2750_BOARD_UNKNOWN },
1550         { USB_DEVICE(0xeb1a, 0x2800),
1551                         .driver_info = EM2800_BOARD_UNKNOWN },
1552         { USB_DEVICE(0xeb1a, 0x2710),
1553                         .driver_info = EM2820_BOARD_UNKNOWN },
1554         { USB_DEVICE(0xeb1a, 0x2820),
1555                         .driver_info = EM2820_BOARD_UNKNOWN },
1556         { USB_DEVICE(0xeb1a, 0x2821),
1557                         .driver_info = EM2820_BOARD_UNKNOWN },
1558         { USB_DEVICE(0xeb1a, 0x2860),
1559                         .driver_info = EM2820_BOARD_UNKNOWN },
1560         { USB_DEVICE(0xeb1a, 0x2861),
1561                         .driver_info = EM2820_BOARD_UNKNOWN },
1562         { USB_DEVICE(0xeb1a, 0x2870),
1563                         .driver_info = EM2820_BOARD_UNKNOWN },
1564         { USB_DEVICE(0xeb1a, 0x2881),
1565                         .driver_info = EM2820_BOARD_UNKNOWN },
1566         { USB_DEVICE(0xeb1a, 0x2883),
1567                         .driver_info = EM2820_BOARD_UNKNOWN },
1568         { USB_DEVICE(0xeb1a, 0xe300),
1569                         .driver_info = EM2861_BOARD_KWORLD_PVRTV_300U },
1570         { USB_DEVICE(0xeb1a, 0xe303),
1571                         .driver_info = EM2860_BOARD_KAIOMY_TVNPC_U2 },
1572         { USB_DEVICE(0xeb1a, 0xe305),
1573                         .driver_info = EM2880_BOARD_KWORLD_DVB_305U },
1574         { USB_DEVICE(0xeb1a, 0xe310),
1575                         .driver_info = EM2880_BOARD_MSI_DIGIVOX_AD },
1576         { USB_DEVICE(0xeb1a, 0xa313),
1577                 .driver_info = EM2882_BOARD_KWORLD_ATSC_315U },
1578         { USB_DEVICE(0xeb1a, 0xa316),
1579                         .driver_info = EM2883_BOARD_KWORLD_HYBRID_330U },
1580         { USB_DEVICE(0xeb1a, 0xe320),
1581                         .driver_info = EM2880_BOARD_MSI_DIGIVOX_AD_II },
1582         { USB_DEVICE(0xeb1a, 0xe323),
1583                         .driver_info = EM2882_BOARD_KWORLD_VS_DVBT },
1584         { USB_DEVICE(0xeb1a, 0xe350),
1585                         .driver_info = EM2870_BOARD_KWORLD_350U },
1586         { USB_DEVICE(0xeb1a, 0xe355),
1587                         .driver_info = EM2870_BOARD_KWORLD_355U },
1588         { USB_DEVICE(0xeb1a, 0x2801),
1589                         .driver_info = EM2800_BOARD_GRABBEEX_USB2800 },
1590         { USB_DEVICE(0xeb1a, 0xe357),
1591                         .driver_info = EM2870_BOARD_KWORLD_355U },
1592         { USB_DEVICE(0x1b80, 0xe302),
1593                         .driver_info = EM2820_BOARD_PINNACLE_DVC_90 }, /* Kaiser Baas Video to DVD maker */
1594         { USB_DEVICE(0x0ccd, 0x0036),
1595                         .driver_info = EM2820_BOARD_TERRATEC_CINERGY_250 },
1596         { USB_DEVICE(0x0ccd, 0x004c),
1597                         .driver_info = EM2880_BOARD_TERRATEC_HYBRID_XS_FR },
1598         { USB_DEVICE(0x0ccd, 0x004f),
1599                         .driver_info = EM2860_BOARD_TERRATEC_HYBRID_XS },
1600         { USB_DEVICE(0x0ccd, 0x005e),
1601                         .driver_info = EM2882_BOARD_TERRATEC_HYBRID_XS },
1602         { USB_DEVICE(0x0ccd, 0x0042),
1603                         .driver_info = EM2880_BOARD_TERRATEC_HYBRID_XS },
1604         { USB_DEVICE(0x0ccd, 0x0043),
1605                         .driver_info = EM2870_BOARD_TERRATEC_XS },
1606         { USB_DEVICE(0x0ccd, 0x0047),
1607                         .driver_info = EM2880_BOARD_TERRATEC_PRODIGY_XS },
1608         { USB_DEVICE(0x0ccd, 0x0084),
1609                         .driver_info = EM2860_BOARD_TERRATEC_AV350 },
1610         { USB_DEVICE(0x0ccd, 0x0096),
1611                         .driver_info = EM2860_BOARD_TERRATEC_GRABBY },
1612         { USB_DEVICE(0x185b, 0x2870),
1613                         .driver_info = EM2870_BOARD_COMPRO_VIDEOMATE },
1614         { USB_DEVICE(0x185b, 0x2041),
1615                         .driver_info = EM2820_BOARD_COMPRO_VIDEOMATE_FORYOU },
1616         { USB_DEVICE(0x2040, 0x4200),
1617                         .driver_info = EM2820_BOARD_HAUPPAUGE_WINTV_USB_2 },
1618         { USB_DEVICE(0x2040, 0x4201),
1619                         .driver_info = EM2820_BOARD_HAUPPAUGE_WINTV_USB_2 },
1620         { USB_DEVICE(0x2040, 0x6500),
1621                         .driver_info = EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900 },
1622         { USB_DEVICE(0x2040, 0x6502),
1623                         .driver_info = EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2 },
1624         { USB_DEVICE(0x2040, 0x6513), /* HCW HVR-980 */
1625                         .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 },
1626         { USB_DEVICE(0x2040, 0x6517), /* HP  HVR-950 */
1627                         .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 },
1628         { USB_DEVICE(0x2040, 0x651b), /* RP  HVR-950 */
1629                         .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 },
1630         { USB_DEVICE(0x2040, 0x651f),
1631                         .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850 },
1632         { USB_DEVICE(0x0438, 0xb002),
1633                         .driver_info = EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600 },
1634         { USB_DEVICE(0x2001, 0xf112),
1635                         .driver_info = EM2820_BOARD_DLINK_USB_TV },
1636         { USB_DEVICE(0x2304, 0x0207),
1637                         .driver_info = EM2820_BOARD_PINNACLE_DVC_90 },
1638         { USB_DEVICE(0x2304, 0x0208),
1639                         .driver_info = EM2820_BOARD_PINNACLE_USB_2 },
1640         { USB_DEVICE(0x2304, 0x021a),
1641                         .driver_info = EM2820_BOARD_PINNACLE_DVC_90 },
1642         { USB_DEVICE(0x2304, 0x0226),
1643                         .driver_info = EM2882_BOARD_PINNACLE_HYBRID_PRO },
1644         { USB_DEVICE(0x2304, 0x0227),
1645                         .driver_info = EM2880_BOARD_PINNACLE_PCTV_HD_PRO },
1646         { USB_DEVICE(0x0413, 0x6023),
1647                         .driver_info = EM2800_BOARD_LEADTEK_WINFAST_USBII },
1648         { USB_DEVICE(0x093b, 0xa005),
1649                         .driver_info = EM2861_BOARD_PLEXTOR_PX_TV100U },
1650         { USB_DEVICE(0x04bb, 0x0515),
1651                         .driver_info = EM2820_BOARD_IODATA_GVMVP_SZ },
1652         { },
1653 };
1654 MODULE_DEVICE_TABLE(usb, em28xx_id_table);
1655
1656 /*
1657  * EEPROM hash table for devices with generic USB IDs
1658  */
1659 static struct em28xx_hash_table em28xx_eeprom_hash[] = {
1660         /* P/N: SA 60002070465 Tuner: TVF7533-MF */
1661         {0x6ce05a8f, EM2820_BOARD_PROLINK_PLAYTV_USB2, TUNER_YMEC_TVF_5533MF},
1662         {0x72cc5a8b, EM2820_BOARD_PROLINK_PLAYTV_BOX4_USB2, TUNER_YMEC_TVF_5533MF},
1663         {0x966a0441, EM2880_BOARD_KWORLD_DVB_310U, TUNER_XC2028},
1664         {0x9567eb1a, EM2880_BOARD_EMPIRE_DUAL_TV, TUNER_XC2028},
1665         {0xcee44a99, EM2882_BOARD_EVGA_INDTUBE, TUNER_XC2028},
1666         {0xb8846b20, EM2881_BOARD_PINNACLE_HYBRID_PRO, TUNER_XC2028},
1667 };
1668
1669 /* I2C devicelist hash table for devices with generic USB IDs */
1670 static struct em28xx_hash_table em28xx_i2c_hash[] = {
1671         {0xb06a32c3, EM2800_BOARD_TERRATEC_CINERGY_200, TUNER_LG_PAL_NEW_TAPC},
1672         {0xf51200e3, EM2800_BOARD_VGEAR_POCKETTV, TUNER_LG_PAL_NEW_TAPC},
1673         {0x1ba50080, EM2860_BOARD_SAA711X_REFERENCE_DESIGN, TUNER_ABSENT},
1674         {0xc51200e3, EM2820_BOARD_GADMEI_TVR200, TUNER_LG_PAL_NEW_TAPC},
1675 };
1676
1677 /* I2C possible address to saa7115, tvp5150, msp3400, tvaudio */
1678 static unsigned short saa711x_addrs[] = {
1679         0x4a >> 1, 0x48 >> 1,   /* SAA7111, SAA7111A and SAA7113 */
1680         0x42 >> 1, 0x40 >> 1,   /* SAA7114, SAA7115 and SAA7118 */
1681         I2C_CLIENT_END };
1682
1683 static unsigned short tvp5150_addrs[] = {
1684         0xb8 >> 1,
1685         0xba >> 1,
1686         I2C_CLIENT_END
1687 };
1688
1689 static unsigned short mt9v011_addrs[] = {
1690         0xba >> 1,
1691         I2C_CLIENT_END
1692 };
1693
1694 static unsigned short msp3400_addrs[] = {
1695         0x80 >> 1,
1696         0x88 >> 1,
1697         I2C_CLIENT_END
1698 };
1699
1700 int em28xx_tuner_callback(void *ptr, int component, int command, int arg)
1701 {
1702         int rc = 0;
1703         struct em28xx *dev = ptr;
1704
1705         if (dev->tuner_type != TUNER_XC2028)
1706                 return 0;
1707
1708         if (command != XC2028_TUNER_RESET)
1709                 return 0;
1710
1711         rc = em28xx_gpio_set(dev, dev->board.tuner_gpio);
1712
1713         return rc;
1714 }
1715 EXPORT_SYMBOL_GPL(em28xx_tuner_callback);
1716
1717 static inline void em28xx_set_model(struct em28xx *dev)
1718 {
1719         memcpy(&dev->board, &em28xx_boards[dev->model], sizeof(dev->board));
1720
1721         /* Those are the default values for the majority of boards
1722            Use those values if not specified otherwise at boards entry
1723          */
1724         if (!dev->board.xclk)
1725                 dev->board.xclk = EM28XX_XCLK_IR_RC5_MODE |
1726                                   EM28XX_XCLK_FREQUENCY_12MHZ;
1727
1728         if (!dev->board.i2c_speed)
1729                 dev->board.i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
1730                                        EM28XX_I2C_FREQ_100_KHZ;
1731 }
1732
1733 /* FIXME: Should be replaced by a proper mt9m001 driver */
1734 static int em28xx_initialize_mt9m001(struct em28xx *dev)
1735 {
1736         int i;
1737         unsigned char regs[][3] = {
1738                 { 0x0d, 0x00, 0x01, },
1739                 { 0x0d, 0x00, 0x00, },
1740                 { 0x04, 0x05, 0x00, },  /* hres = 1280 */
1741                 { 0x03, 0x04, 0x00, },  /* vres = 1024 */
1742                 { 0x20, 0x11, 0x00, },
1743                 { 0x06, 0x00, 0x10, },
1744                 { 0x2b, 0x00, 0x24, },
1745                 { 0x2e, 0x00, 0x24, },
1746                 { 0x35, 0x00, 0x24, },
1747                 { 0x2d, 0x00, 0x20, },
1748                 { 0x2c, 0x00, 0x20, },
1749                 { 0x09, 0x0a, 0xd4, },
1750                 { 0x35, 0x00, 0x57, },
1751         };
1752
1753         for (i = 0; i < ARRAY_SIZE(regs); i++)
1754                 i2c_master_send(&dev->i2c_client, &regs[i][0], 3);
1755
1756         return 0;
1757 }
1758
1759 /* HINT method: webcam I2C chips
1760  *
1761  * This method work for webcams with Micron sensors
1762  */
1763 static int em28xx_hint_sensor(struct em28xx *dev)
1764 {
1765         int rc;
1766         char *sensor_name;
1767         unsigned char cmd;
1768         __be16 version_be;
1769         u16 version;
1770
1771         dev->i2c_client.addr = 0xba >> 1;
1772         cmd = 0;
1773         i2c_master_send(&dev->i2c_client, &cmd, 1);
1774         rc = i2c_master_recv(&dev->i2c_client, (char *)&version_be, 2);
1775         if (rc != 2)
1776                 return -EINVAL;
1777
1778         version = be16_to_cpu(version_be);
1779
1780         switch (version) {
1781         case 0x8232:            /* mt9v011 640x480 1.3 Mpix sensor */
1782         case 0x8243:            /* mt9v011 rev B 640x480 1.3 Mpix sensor */
1783                 dev->model = EM2820_BOARD_SILVERCREST_WEBCAM;
1784                 sensor_name = "mt9v011";
1785                 dev->em28xx_sensor = EM28XX_MT9V011;
1786                 dev->sensor_xres = 640;
1787                 dev->sensor_yres = 480;
1788                 dev->sensor_xtal = 6300000;
1789
1790                 /* probably means GRGB 16 bit bayer */
1791                 dev->vinmode = 0x0d;
1792                 dev->vinctl = 0x00;
1793
1794                 break;
1795         case 0x8431:
1796                 dev->model = EM2750_BOARD_UNKNOWN;
1797                 sensor_name = "mt9m001";
1798                 dev->em28xx_sensor = EM28XX_MT9M001;
1799                 em28xx_initialize_mt9m001(dev);
1800                 dev->sensor_xres = 1280;
1801                 dev->sensor_yres = 1024;
1802
1803                 /* probably means BGGR 16 bit bayer */
1804                 dev->vinmode = 0x0c;
1805                 dev->vinctl = 0x00;
1806
1807                 break;
1808         default:
1809                 printk("Unknown Micron Sensor 0x%04x\n", be16_to_cpu(version));
1810                 return -EINVAL;
1811         }
1812
1813         em28xx_errdev("Sensor is %s, using model %s entry.\n",
1814                       sensor_name, em28xx_boards[dev->model].name);
1815
1816         return 0;
1817 }
1818
1819 /* Since em28xx_pre_card_setup() requires a proper dev->model,
1820  * this won't work for boards with generic PCI IDs
1821  */
1822 void em28xx_pre_card_setup(struct em28xx *dev)
1823 {
1824         int rc;
1825
1826         em28xx_set_model(dev);
1827
1828         em28xx_info("Identified as %s (card=%d)\n",
1829                     dev->board.name, dev->model);
1830
1831         /* Set the default GPO/GPIO for legacy devices */
1832         dev->reg_gpo_num = EM2880_R04_GPO;
1833         dev->reg_gpio_num = EM28XX_R08_GPIO;
1834
1835         dev->wait_after_write = 5;
1836
1837         /* Based on the Chip ID, set the device configuration */
1838         rc = em28xx_read_reg(dev, EM28XX_R0A_CHIPID);
1839         if (rc > 0) {
1840                 dev->chip_id = rc;
1841
1842                 switch (dev->chip_id) {
1843                 case CHIP_ID_EM2710:
1844                         em28xx_info("chip ID is em2710\n");
1845                         break;
1846                 case CHIP_ID_EM2750:
1847                         em28xx_info("chip ID is em2750\n");
1848                         break;
1849                 case CHIP_ID_EM2820:
1850                         em28xx_info("chip ID is em2820 (or em2710)\n");
1851                         break;
1852                 case CHIP_ID_EM2840:
1853                         em28xx_info("chip ID is em2840\n");
1854                         break;
1855                 case CHIP_ID_EM2860:
1856                         em28xx_info("chip ID is em2860\n");
1857                         break;
1858                 case CHIP_ID_EM2870:
1859                         em28xx_info("chip ID is em2870\n");
1860                         dev->wait_after_write = 0;
1861                         break;
1862                 case CHIP_ID_EM2874:
1863                         em28xx_info("chip ID is em2874\n");
1864                         dev->reg_gpio_num = EM2874_R80_GPIO;
1865                         dev->wait_after_write = 0;
1866                         break;
1867                 case CHIP_ID_EM2883:
1868                         em28xx_info("chip ID is em2882/em2883\n");
1869                         dev->wait_after_write = 0;
1870                         break;
1871                 default:
1872                         em28xx_info("em28xx chip ID = %d\n", dev->chip_id);
1873                 }
1874         }
1875
1876         /* Prepopulate cached GPO register content */
1877         rc = em28xx_read_reg(dev, dev->reg_gpo_num);
1878         if (rc >= 0)
1879                 dev->reg_gpo = rc;
1880
1881         /* Set the initial XCLK and I2C clock values based on the board
1882            definition */
1883         em28xx_write_reg(dev, EM28XX_R0F_XCLK, dev->board.xclk & 0x7f);
1884         em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, dev->board.i2c_speed);
1885         msleep(50);
1886
1887         /* request some modules */
1888         switch (dev->model) {
1889         case EM2861_BOARD_PLEXTOR_PX_TV100U:
1890                 /* Sets the msp34xx I2S speed */
1891                 dev->i2s_speed = 2048000;
1892                 break;
1893         case EM2861_BOARD_KWORLD_PVRTV_300U:
1894         case EM2880_BOARD_KWORLD_DVB_305U:
1895                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0x6d);
1896                 msleep(10);
1897                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0x7d);
1898                 msleep(10);
1899                 break;
1900         case EM2870_BOARD_COMPRO_VIDEOMATE:
1901                 /* TODO: someone can do some cleanup here...
1902                          not everything's needed */
1903                 em28xx_write_reg(dev, EM2880_R04_GPO, 0x00);
1904                 msleep(10);
1905                 em28xx_write_reg(dev, EM2880_R04_GPO, 0x01);
1906                 msleep(10);
1907                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd);
1908                 mdelay(70);
1909                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfc);
1910                 mdelay(70);
1911                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xdc);
1912                 mdelay(70);
1913                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfc);
1914                 mdelay(70);
1915                 break;
1916         case EM2870_BOARD_TERRATEC_XS_MT2060:
1917                 /* this device needs some gpio writes to get the DVB-T
1918                    demod work */
1919                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
1920                 mdelay(70);
1921                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xde);
1922                 mdelay(70);
1923                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
1924                 mdelay(70);
1925                 break;
1926         case EM2870_BOARD_PINNACLE_PCTV_DVB:
1927                 /* this device needs some gpio writes to get the
1928                    DVB-T demod work */
1929                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
1930                 mdelay(70);
1931                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xde);
1932                 mdelay(70);
1933                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
1934                 mdelay(70);
1935                 break;
1936         case EM2820_BOARD_GADMEI_UTV310:
1937         case EM2820_BOARD_MSI_VOX_USB_2:
1938                 /* enables audio for that devices */
1939                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd);
1940                 break;
1941
1942         case EM2882_BOARD_KWORLD_ATSC_315U:
1943                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xff);
1944                 msleep(10);
1945                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
1946                 msleep(10);
1947                 em28xx_write_reg(dev, EM2880_R04_GPO, 0x00);
1948                 msleep(10);
1949                 em28xx_write_reg(dev, EM2880_R04_GPO, 0x08);
1950                 msleep(10);
1951                 break;
1952
1953         case EM2860_BOARD_KAIOMY_TVNPC_U2:
1954                 em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x07", 1);
1955                 em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1);
1956                 em28xx_write_regs(dev, 0x0d, "\x42", 1);
1957                 em28xx_write_regs(dev, 0x08, "\xfd", 1);
1958                 msleep(10);
1959                 em28xx_write_regs(dev, 0x08, "\xff", 1);
1960                 msleep(10);
1961                 em28xx_write_regs(dev, 0x08, "\x7f", 1);
1962                 msleep(10);
1963                 em28xx_write_regs(dev, 0x08, "\x6b", 1);
1964
1965                 break;
1966         case EM2860_BOARD_EASYCAP:
1967                 em28xx_write_regs(dev, 0x08, "\xf8", 1);
1968                 break;
1969
1970         case EM2820_BOARD_IODATA_GVMVP_SZ:
1971                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xff);
1972                 msleep(70);
1973                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xf7);
1974                 msleep(10);
1975                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
1976                 msleep(70);
1977                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd);
1978                 msleep(70);
1979                 break;
1980         }
1981
1982         em28xx_gpio_set(dev, dev->board.tuner_gpio);
1983         em28xx_set_mode(dev, EM28XX_ANALOG_MODE);
1984
1985         /* Unlock device */
1986         em28xx_set_mode(dev, EM28XX_SUSPEND);
1987 }
1988
1989 static void em28xx_setup_xc3028(struct em28xx *dev, struct xc2028_ctrl *ctl)
1990 {
1991         memset(ctl, 0, sizeof(*ctl));
1992
1993         ctl->fname   = XC2028_DEFAULT_FIRMWARE;
1994         ctl->max_len = 64;
1995         ctl->mts = em28xx_boards[dev->model].mts_firmware;
1996
1997         switch (dev->model) {
1998         case EM2880_BOARD_EMPIRE_DUAL_TV:
1999         case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900:
2000                 ctl->demod = XC3028_FE_ZARLINK456;
2001                 break;
2002         case EM2880_BOARD_TERRATEC_HYBRID_XS:
2003         case EM2881_BOARD_PINNACLE_HYBRID_PRO:
2004                 ctl->demod = XC3028_FE_ZARLINK456;
2005                 break;
2006         case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2:
2007                 /* djh - Not sure which demod we need here */
2008                 ctl->demod = XC3028_FE_DEFAULT;
2009                 break;
2010         case EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600:
2011                 ctl->demod = XC3028_FE_DEFAULT;
2012                 ctl->fname = XC3028L_DEFAULT_FIRMWARE;
2013                 break;
2014         case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850:
2015         case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950:
2016         case EM2880_BOARD_PINNACLE_PCTV_HD_PRO:
2017                 /* FIXME: Better to specify the needed IF */
2018                 ctl->demod = XC3028_FE_DEFAULT;
2019                 break;
2020         case EM2883_BOARD_KWORLD_HYBRID_330U:
2021                 ctl->demod = XC3028_FE_CHINA;
2022                 ctl->fname = XC2028_DEFAULT_FIRMWARE;
2023                 break;
2024         case EM2882_BOARD_EVGA_INDTUBE:
2025                 ctl->demod = XC3028_FE_CHINA;
2026                 ctl->fname = XC3028L_DEFAULT_FIRMWARE;
2027                 break;
2028         default:
2029                 ctl->demod = XC3028_FE_OREN538;
2030         }
2031 }
2032
2033 static void em28xx_tuner_setup(struct em28xx *dev)
2034 {
2035         struct tuner_setup           tun_setup;
2036         struct v4l2_frequency        f;
2037
2038         if (dev->tuner_type == TUNER_ABSENT)
2039                 return;
2040
2041         memset(&tun_setup, 0, sizeof(tun_setup));
2042
2043         tun_setup.mode_mask = T_ANALOG_TV | T_RADIO;
2044         tun_setup.tuner_callback = em28xx_tuner_callback;
2045
2046         if (dev->board.radio.type) {
2047                 tun_setup.type = dev->board.radio.type;
2048                 tun_setup.addr = dev->board.radio_addr;
2049
2050                 v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_type_addr, &tun_setup);
2051         }
2052
2053         if ((dev->tuner_type != TUNER_ABSENT) && (dev->tuner_type)) {
2054                 tun_setup.type   = dev->tuner_type;
2055                 tun_setup.addr   = dev->tuner_addr;
2056
2057                 v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_type_addr, &tun_setup);
2058         }
2059
2060         if (dev->tda9887_conf) {
2061                 struct v4l2_priv_tun_config tda9887_cfg;
2062
2063                 tda9887_cfg.tuner = TUNER_TDA9887;
2064                 tda9887_cfg.priv = &dev->tda9887_conf;
2065
2066                 v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_config, &tda9887_cfg);
2067         }
2068
2069         if (dev->tuner_type == TUNER_XC2028) {
2070                 struct v4l2_priv_tun_config  xc2028_cfg;
2071                 struct xc2028_ctrl           ctl;
2072
2073                 memset(&xc2028_cfg, 0, sizeof(xc2028_cfg));
2074                 memset(&ctl, 0, sizeof(ctl));
2075
2076                 em28xx_setup_xc3028(dev, &ctl);
2077
2078                 xc2028_cfg.tuner = TUNER_XC2028;
2079                 xc2028_cfg.priv  = &ctl;
2080
2081                 v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_config, &xc2028_cfg);
2082         }
2083
2084         /* configure tuner */
2085         f.tuner = 0;
2086         f.type = V4L2_TUNER_ANALOG_TV;
2087         f.frequency = 9076;     /* just a magic number */
2088         dev->ctl_freq = f.frequency;
2089         v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_frequency, &f);
2090 }
2091
2092 static int em28xx_hint_board(struct em28xx *dev)
2093 {
2094         int i;
2095
2096         /* HINT method: EEPROM
2097          *
2098          * This method works only for boards with eeprom.
2099          * Uses a hash of all eeprom bytes. The hash should be
2100          * unique for a vendor/tuner pair.
2101          * There are a high chance that tuners for different
2102          * video standards produce different hashes.
2103          */
2104         for (i = 0; i < ARRAY_SIZE(em28xx_eeprom_hash); i++) {
2105                 if (dev->hash == em28xx_eeprom_hash[i].hash) {
2106                         dev->model = em28xx_eeprom_hash[i].model;
2107                         dev->tuner_type = em28xx_eeprom_hash[i].tuner;
2108
2109                         em28xx_errdev("Your board has no unique USB ID.\n");
2110                         em28xx_errdev("A hint were successfully done, "
2111                                       "based on eeprom hash.\n");
2112                         em28xx_errdev("This method is not 100%% failproof.\n");
2113                         em28xx_errdev("If the board were missdetected, "
2114                                       "please email this log to:\n");
2115                         em28xx_errdev("\tV4L Mailing List "
2116                                       " <linux-media@vger.kernel.org>\n");
2117                         em28xx_errdev("Board detected as %s\n",
2118                                       em28xx_boards[dev->model].name);
2119
2120                         return 0;
2121                 }
2122         }
2123
2124         /* HINT method: I2C attached devices
2125          *
2126          * This method works for all boards.
2127          * Uses a hash of i2c scanned devices.
2128          * Devices with the same i2c attached chips will
2129          * be considered equal.
2130          * This method is less precise than the eeprom one.
2131          */
2132
2133         /* user did not request i2c scanning => do it now */
2134         if (!dev->i2c_hash)
2135                 em28xx_do_i2c_scan(dev);
2136
2137         for (i = 0; i < ARRAY_SIZE(em28xx_i2c_hash); i++) {
2138                 if (dev->i2c_hash == em28xx_i2c_hash[i].hash) {
2139                         dev->model = em28xx_i2c_hash[i].model;
2140                         dev->tuner_type = em28xx_i2c_hash[i].tuner;
2141                         em28xx_errdev("Your board has no unique USB ID.\n");
2142                         em28xx_errdev("A hint were successfully done, "
2143                                       "based on i2c devicelist hash.\n");
2144                         em28xx_errdev("This method is not 100%% failproof.\n");
2145                         em28xx_errdev("If the board were missdetected, "
2146                                       "please email this log to:\n");
2147                         em28xx_errdev("\tV4L Mailing List "
2148                                       " <linux-media@vger.kernel.org>\n");
2149                         em28xx_errdev("Board detected as %s\n",
2150                                       em28xx_boards[dev->model].name);
2151
2152                         return 0;
2153                 }
2154         }
2155
2156         em28xx_errdev("Your board has no unique USB ID and thus need a "
2157                       "hint to be detected.\n");
2158         em28xx_errdev("You may try to use card=<n> insmod option to "
2159                       "workaround that.\n");
2160         em28xx_errdev("Please send an email with this log to:\n");
2161         em28xx_errdev("\tV4L Mailing List <linux-media@vger.kernel.org>\n");
2162         em28xx_errdev("Board eeprom hash is 0x%08lx\n", dev->hash);
2163         em28xx_errdev("Board i2c devicelist hash is 0x%08lx\n", dev->i2c_hash);
2164
2165         em28xx_errdev("Here is a list of valid choices for the card=<n>"
2166                       " insmod option:\n");
2167         for (i = 0; i < em28xx_bcount; i++) {
2168                 em28xx_errdev("    card=%d -> %s\n",
2169                                 i, em28xx_boards[i].name);
2170         }
2171         return -1;
2172 }
2173
2174 /* ----------------------------------------------------------------------- */
2175 void em28xx_register_i2c_ir(struct em28xx *dev)
2176 {
2177         struct i2c_board_info info;
2178         struct IR_i2c_init_data init_data;
2179         const unsigned short addr_list[] = {
2180                  0x30, 0x47, I2C_CLIENT_END
2181         };
2182
2183         if (disable_ir)
2184                 return;
2185
2186         memset(&info, 0, sizeof(struct i2c_board_info));
2187         memset(&init_data, 0, sizeof(struct IR_i2c_init_data));
2188         strlcpy(info.type, "ir_video", I2C_NAME_SIZE);
2189
2190         /* detect & configure */
2191         switch (dev->model) {
2192         case (EM2800_BOARD_UNKNOWN):
2193                 break;
2194         case (EM2820_BOARD_UNKNOWN):
2195                 break;
2196         case (EM2800_BOARD_TERRATEC_CINERGY_200):
2197         case (EM2820_BOARD_TERRATEC_CINERGY_250):
2198                 init_data.ir_codes = ir_codes_em_terratec;
2199                 init_data.get_key = em28xx_get_key_terratec;
2200                 init_data.name = "i2c IR (EM28XX Terratec)";
2201                 break;
2202         case (EM2820_BOARD_PINNACLE_USB_2):
2203                 init_data.ir_codes = ir_codes_pinnacle_grey;
2204                 init_data.get_key = em28xx_get_key_pinnacle_usb_grey;
2205                 init_data.name = "i2c IR (EM28XX Pinnacle PCTV)";
2206                 break;
2207         case (EM2820_BOARD_HAUPPAUGE_WINTV_USB_2):
2208                 init_data.ir_codes = ir_codes_hauppauge_new;
2209                 init_data.get_key = em28xx_get_key_em_haup;
2210                 init_data.name = "i2c IR (EM2840 Hauppauge)";
2211                 break;
2212         case (EM2820_BOARD_MSI_VOX_USB_2):
2213                 break;
2214         case (EM2800_BOARD_LEADTEK_WINFAST_USBII):
2215                 break;
2216         case (EM2800_BOARD_KWORLD_USB2800):
2217                 break;
2218         case (EM2800_BOARD_GRABBEEX_USB2800):
2219                 break;
2220         }
2221
2222         if (init_data.name)
2223                 info.platform_data = &init_data;
2224         i2c_new_probed_device(&dev->i2c_adap, &info, addr_list);
2225 }
2226
2227 void em28xx_card_setup(struct em28xx *dev)
2228 {
2229         em28xx_set_model(dev);
2230
2231         dev->tuner_type = em28xx_boards[dev->model].tuner_type;
2232         if (em28xx_boards[dev->model].tuner_addr)
2233                 dev->tuner_addr = em28xx_boards[dev->model].tuner_addr;
2234
2235         if (em28xx_boards[dev->model].tda9887_conf)
2236                 dev->tda9887_conf = em28xx_boards[dev->model].tda9887_conf;
2237
2238         /* request some modules */
2239         switch (dev->model) {
2240         case EM2820_BOARD_HAUPPAUGE_WINTV_USB_2:
2241         case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900:
2242         case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2:
2243         case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850:
2244         case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950:
2245         {
2246                 struct tveeprom tv;
2247 #ifdef CONFIG_MODULES
2248                 request_module("tveeprom");
2249 #endif
2250                 /* Call first TVeeprom */
2251
2252                 dev->i2c_client.addr = 0xa0 >> 1;
2253                 tveeprom_hauppauge_analog(&dev->i2c_client, &tv, dev->eedata);
2254
2255                 dev->tuner_type = tv.tuner_type;
2256
2257                 if (tv.audio_processor == V4L2_IDENT_MSPX4XX) {
2258                         dev->i2s_speed = 2048000;
2259                         dev->board.has_msp34xx = 1;
2260                 }
2261 #ifdef CONFIG_MODULES
2262                 if (tv.has_ir)
2263                         request_module("ir-kbd-i2c");
2264 #endif
2265                 break;
2266         }
2267         case EM2882_BOARD_KWORLD_ATSC_315U:
2268                 em28xx_write_reg(dev, 0x0d, 0x42);
2269                 msleep(10);
2270                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd);
2271                 msleep(10);
2272                 break;
2273         case EM2820_BOARD_KWORLD_PVRTV2800RF:
2274                 /* GPIO enables sound on KWORLD PVR TV 2800RF */
2275                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xf9);
2276                 break;
2277         case EM2820_BOARD_UNKNOWN:
2278         case EM2800_BOARD_UNKNOWN:
2279                 /*
2280                  * The K-WORLD DVB-T 310U is detected as an MSI Digivox AD.
2281                  *
2282                  * This occurs because they share identical USB vendor and
2283                  * product IDs.
2284                  *
2285                  * What we do here is look up the EEPROM hash of the K-WORLD
2286                  * and if it is found then we decide that we do not have
2287                  * a DIGIVOX and reset the device to the K-WORLD instead.
2288                  *
2289                  * This solution is only valid if they do not share eeprom
2290                  * hash identities which has not been determined as yet.
2291                  */
2292         case EM2880_BOARD_MSI_DIGIVOX_AD:
2293                 if (!em28xx_hint_board(dev))
2294                         em28xx_set_model(dev);
2295
2296                 /* In cases where we had to use a board hint, the call to
2297                    em28xx_set_mode() in em28xx_pre_card_setup() was a no-op,
2298                    so make the call now so the analog GPIOs are set properly
2299                    before probing the i2c bus. */
2300                 em28xx_gpio_set(dev, dev->board.tuner_gpio);
2301                 em28xx_set_mode(dev, EM28XX_ANALOG_MODE);
2302                 break;
2303         case EM2820_BOARD_SILVERCREST_WEBCAM:
2304                 /* FIXME: need to document the registers bellow */
2305                 em28xx_write_reg(dev, 0x0d, 0x42);
2306                 em28xx_write_reg(dev, 0x13, 0x08);
2307         }
2308
2309         if (dev->board.has_snapshot_button)
2310                 em28xx_register_snapshot_button(dev);
2311
2312         if (dev->board.valid == EM28XX_BOARD_NOT_VALIDATED) {
2313                 em28xx_errdev("\n\n");
2314                 em28xx_errdev("The support for this board weren't "
2315                               "valid yet.\n");
2316                 em28xx_errdev("Please send a report of having this working\n");
2317                 em28xx_errdev("not to V4L mailing list (and/or to other "
2318                                 "addresses)\n\n");
2319         }
2320
2321         /* Allow override tuner type by a module parameter */
2322         if (tuner >= 0)
2323                 dev->tuner_type = tuner;
2324
2325         /* request some modules */
2326         if (dev->board.has_msp34xx)
2327                 v4l2_i2c_new_probed_subdev(&dev->v4l2_dev, &dev->i2c_adap,
2328                         "msp3400", "msp3400", msp3400_addrs);
2329
2330         if (dev->board.decoder == EM28XX_SAA711X)
2331                 v4l2_i2c_new_probed_subdev(&dev->v4l2_dev, &dev->i2c_adap,
2332                         "saa7115", "saa7115_auto", saa711x_addrs);
2333
2334         if (dev->board.decoder == EM28XX_TVP5150)
2335                 v4l2_i2c_new_probed_subdev(&dev->v4l2_dev, &dev->i2c_adap,
2336                         "tvp5150", "tvp5150", tvp5150_addrs);
2337
2338         if (dev->em28xx_sensor == EM28XX_MT9V011) {
2339                 struct v4l2_subdev *sd;
2340
2341                 sd = v4l2_i2c_new_probed_subdev(&dev->v4l2_dev,
2342                          &dev->i2c_adap, "mt9v011", "mt9v011", mt9v011_addrs);
2343                 v4l2_subdev_call(sd, core, s_config, 0, &dev->sensor_xtal);
2344         }
2345
2346
2347         if (dev->board.adecoder == EM28XX_TVAUDIO)
2348                 v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
2349                         "tvaudio", "tvaudio", dev->board.tvaudio_addr);
2350
2351         if (dev->board.tuner_type != TUNER_ABSENT) {
2352                 int has_demod = (dev->tda9887_conf & TDA9887_PRESENT);
2353
2354                 if (dev->board.radio.type)
2355                         v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
2356                                 "tuner", "tuner", dev->board.radio_addr);
2357
2358                 if (has_demod)
2359                         v4l2_i2c_new_probed_subdev(&dev->v4l2_dev,
2360                                 &dev->i2c_adap, "tuner", "tuner",
2361                                 v4l2_i2c_tuner_addrs(ADDRS_DEMOD));
2362                 if (dev->tuner_addr == 0) {
2363                         enum v4l2_i2c_tuner_type type =
2364                                 has_demod ? ADDRS_TV_WITH_DEMOD : ADDRS_TV;
2365                         struct v4l2_subdev *sd;
2366
2367                         sd = v4l2_i2c_new_probed_subdev(&dev->v4l2_dev,
2368                                 &dev->i2c_adap, "tuner", "tuner",
2369                                 v4l2_i2c_tuner_addrs(type));
2370
2371                         if (sd)
2372                                 dev->tuner_addr = v4l2_i2c_subdev_addr(sd);
2373                 } else {
2374                         v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
2375                                 "tuner", "tuner", dev->tuner_addr);
2376                 }
2377         }
2378
2379         em28xx_tuner_setup(dev);
2380         em28xx_ir_init(dev);
2381 }
2382
2383
2384 #if defined(CONFIG_MODULES) && defined(MODULE)
2385 static void request_module_async(struct work_struct *work)
2386 {
2387         struct em28xx *dev = container_of(work,
2388                              struct em28xx, request_module_wk);
2389
2390         if (dev->has_audio_class)
2391                 request_module("snd-usb-audio");
2392         else if (dev->has_alsa_audio)
2393                 request_module("em28xx-alsa");
2394
2395         if (dev->board.has_dvb)
2396                 request_module("em28xx-dvb");
2397 }
2398
2399 static void request_modules(struct em28xx *dev)
2400 {
2401         INIT_WORK(&dev->request_module_wk, request_module_async);
2402         schedule_work(&dev->request_module_wk);
2403 }
2404 #else
2405 #define request_modules(dev)
2406 #endif /* CONFIG_MODULES */
2407
2408 /*
2409  * em28xx_realease_resources()
2410  * unregisters the v4l2,i2c and usb devices
2411  * called when the device gets disconected or at module unload
2412 */
2413 void em28xx_release_resources(struct em28xx *dev)
2414 {
2415         if (dev->sbutton_input_dev)
2416                 em28xx_deregister_snapshot_button(dev);
2417
2418         if (dev->ir)
2419                 em28xx_ir_fini(dev);
2420
2421         /*FIXME: I2C IR should be disconnected */
2422
2423         em28xx_release_analog_resources(dev);
2424
2425         em28xx_remove_from_devlist(dev);
2426
2427         em28xx_i2c_unregister(dev);
2428
2429         v4l2_device_unregister(&dev->v4l2_dev);
2430
2431         usb_put_dev(dev->udev);
2432
2433         /* Mark device as unused */
2434         em28xx_devused &= ~(1 << dev->devno);
2435 };
2436
2437 /*
2438  * em28xx_init_dev()
2439  * allocates and inits the device structs, registers i2c bus and v4l device
2440  */
2441 static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev,
2442                            struct usb_interface *interface,
2443                            int minor)
2444 {
2445         struct em28xx *dev = *devhandle;
2446         int retval = -ENOMEM;
2447         int errCode;
2448
2449         dev->udev = udev;
2450         mutex_init(&dev->ctrl_urb_lock);
2451         spin_lock_init(&dev->slock);
2452         init_waitqueue_head(&dev->open);
2453         init_waitqueue_head(&dev->wait_frame);
2454         init_waitqueue_head(&dev->wait_stream);
2455
2456         dev->em28xx_write_regs = em28xx_write_regs;
2457         dev->em28xx_read_reg = em28xx_read_reg;
2458         dev->em28xx_read_reg_req_len = em28xx_read_reg_req_len;
2459         dev->em28xx_write_regs_req = em28xx_write_regs_req;
2460         dev->em28xx_read_reg_req = em28xx_read_reg_req;
2461         dev->board.is_em2800 = em28xx_boards[dev->model].is_em2800;
2462
2463         em28xx_pre_card_setup(dev);
2464
2465         if (!dev->board.is_em2800) {
2466                 /* Sets I2C speed to 100 KHz */
2467                 retval = em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, 0x40);
2468                 if (retval < 0) {
2469                         em28xx_errdev("%s: em28xx_write_regs_req failed!"
2470                                       " retval [%d]\n",
2471                                       __func__, retval);
2472                         return retval;
2473                 }
2474         }
2475
2476         retval = v4l2_device_register(&interface->dev, &dev->v4l2_dev);
2477         if (retval < 0) {
2478                 em28xx_errdev("Call to v4l2_device_register() failed!\n");
2479                 return retval;
2480         }
2481
2482         /* register i2c bus */
2483         errCode = em28xx_i2c_register(dev);
2484         if (errCode < 0) {
2485                 v4l2_device_unregister(&dev->v4l2_dev);
2486                 em28xx_errdev("%s: em28xx_i2c_register - errCode [%d]!\n",
2487                         __func__, errCode);
2488                 return errCode;
2489         }
2490
2491         /*
2492          * Default format, used for tvp5150 or saa711x output formats
2493          */
2494         dev->vinmode = 0x10;
2495         dev->vinctl  = 0x11;
2496
2497         /*
2498          * If the device can be a webcam, seek for a sensor.
2499          * If sensor is not found, then it isn't a webcam.
2500          */
2501         if (dev->board.is_webcam)
2502                 if (em28xx_hint_sensor(dev) < 0)
2503                         dev->board.is_webcam = 0;
2504
2505         /* Do board specific init and eeprom reading */
2506         em28xx_card_setup(dev);
2507
2508         /* Configure audio */
2509         errCode = em28xx_audio_setup(dev);
2510         if (errCode < 0) {
2511                 v4l2_device_unregister(&dev->v4l2_dev);
2512                 em28xx_errdev("%s: Error while setting audio - errCode [%d]!\n",
2513                         __func__, errCode);
2514         }
2515
2516         /* wake i2c devices */
2517         em28xx_wake_i2c(dev);
2518
2519         /* init video dma queues */
2520         INIT_LIST_HEAD(&dev->vidq.active);
2521         INIT_LIST_HEAD(&dev->vidq.queued);
2522
2523
2524         if (dev->board.has_msp34xx) {
2525                 /* Send a reset to other chips via gpio */
2526                 errCode = em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xf7);
2527                 if (errCode < 0) {
2528                         em28xx_errdev("%s: em28xx_write_regs_req - "
2529                                       "msp34xx(1) failed! errCode [%d]\n",
2530                                       __func__, errCode);
2531                         return errCode;
2532                 }
2533                 msleep(3);
2534
2535                 errCode = em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xff);
2536                 if (errCode < 0) {
2537                         em28xx_errdev("%s: em28xx_write_regs_req - "
2538                                       "msp34xx(2) failed! errCode [%d]\n",
2539                                       __func__, errCode);
2540                         return errCode;
2541                 }
2542                 msleep(3);
2543         }
2544
2545         em28xx_add_into_devlist(dev);
2546
2547         retval = em28xx_register_analog_devices(dev);
2548         if (retval < 0) {
2549                 em28xx_release_resources(dev);
2550                 goto fail_reg_devices;
2551         }
2552
2553         em28xx_init_extension(dev);
2554
2555         /* Save some power by putting tuner to sleep */
2556         v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_standby);
2557
2558         return 0;
2559
2560 fail_reg_devices:
2561         return retval;
2562 }
2563
2564 /*
2565  * em28xx_usb_probe()
2566  * checks for supported devices
2567  */
2568 static int em28xx_usb_probe(struct usb_interface *interface,
2569                             const struct usb_device_id *id)
2570 {
2571         const struct usb_endpoint_descriptor *endpoint;
2572         struct usb_device *udev;
2573         struct usb_interface *uif;
2574         struct em28xx *dev = NULL;
2575         int retval;
2576         int i, nr, ifnum, isoc_pipe;
2577         char *speed;
2578         char descr[255] = "";
2579
2580         udev = usb_get_dev(interface_to_usbdev(interface));
2581         ifnum = interface->altsetting[0].desc.bInterfaceNumber;
2582
2583         /* Check to see next free device and mark as used */
2584         nr = find_first_zero_bit(&em28xx_devused, EM28XX_MAXBOARDS);
2585         em28xx_devused |= 1<<nr;
2586
2587         /* Don't register audio interfaces */
2588         if (interface->altsetting[0].desc.bInterfaceClass == USB_CLASS_AUDIO) {
2589                 em28xx_err(DRIVER_NAME " audio device (%04x:%04x): "
2590                         "interface %i, class %i\n",
2591                         le16_to_cpu(udev->descriptor.idVendor),
2592                         le16_to_cpu(udev->descriptor.idProduct),
2593                         ifnum,
2594                         interface->altsetting[0].desc.bInterfaceClass);
2595
2596                 em28xx_devused &= ~(1<<nr);
2597                 retval = -ENODEV;
2598                 goto err;
2599         }
2600
2601         endpoint = &interface->cur_altsetting->endpoint[0].desc;
2602
2603         /* check if the device has the iso in endpoint at the correct place */
2604         if (usb_endpoint_xfer_isoc(endpoint)
2605             &&
2606             (interface->altsetting[1].endpoint[0].desc.wMaxPacketSize == 940)) {
2607                 /* It's a newer em2874/em2875 device */
2608                 isoc_pipe = 0;
2609         } else {
2610                 int check_interface = 1;
2611                 isoc_pipe = 1;
2612                 endpoint = &interface->cur_altsetting->endpoint[1].desc;
2613                 if (!usb_endpoint_xfer_isoc(endpoint))
2614                         check_interface = 0;
2615
2616                 if (usb_endpoint_dir_out(endpoint))
2617                         check_interface = 0;
2618
2619                 if (!check_interface) {
2620                         em28xx_err(DRIVER_NAME " video device (%04x:%04x): "
2621                                 "interface %i, class %i found.\n",
2622                                 le16_to_cpu(udev->descriptor.idVendor),
2623                                 le16_to_cpu(udev->descriptor.idProduct),
2624                                 ifnum,
2625                                 interface->altsetting[0].desc.bInterfaceClass);
2626
2627                         em28xx_err(DRIVER_NAME " This is an anciliary "
2628                                 "interface not used by the driver\n");
2629
2630                         em28xx_devused &= ~(1<<nr);
2631                         retval = -ENODEV;
2632                         goto err;
2633                 }
2634         }
2635
2636         switch (udev->speed) {
2637         case USB_SPEED_LOW:
2638                 speed = "1.5";
2639                 break;
2640         case USB_SPEED_UNKNOWN:
2641         case USB_SPEED_FULL:
2642                 speed = "12";
2643                 break;
2644         case USB_SPEED_HIGH:
2645                 speed = "480";
2646                 break;
2647         default:
2648                 speed = "unknown";
2649         }
2650
2651         if (udev->manufacturer)
2652                 strlcpy(descr, udev->manufacturer, sizeof(descr));
2653
2654         if (udev->product) {
2655                 if (*descr)
2656                         strlcat(descr, " ", sizeof(descr));
2657                 strlcat(descr, udev->product, sizeof(descr));
2658         }
2659         if (*descr)
2660                 strlcat(descr, " ", sizeof(descr));
2661
2662         printk(DRIVER_NAME ": New device %s@ %s Mbps "
2663                 "(%04x:%04x, interface %d, class %d)\n",
2664                 descr,
2665                 speed,
2666                 le16_to_cpu(udev->descriptor.idVendor),
2667                 le16_to_cpu(udev->descriptor.idProduct),
2668                 ifnum,
2669                 interface->altsetting->desc.bInterfaceNumber);
2670
2671         /*
2672          * Make sure we have 480 Mbps of bandwidth, otherwise things like
2673          * video stream wouldn't likely work, since 12 Mbps is generally
2674          * not enough even for most Digital TV streams.
2675          */
2676         if (udev->speed != USB_SPEED_HIGH && disable_usb_speed_check == 0) {
2677                 printk(DRIVER_NAME ": Device initialization failed.\n");
2678                 printk(DRIVER_NAME ": Device must be connected to a high-speed"
2679                        " USB 2.0 port.\n");
2680                 em28xx_devused &= ~(1<<nr);
2681                 retval = -ENODEV;
2682                 goto err;
2683         }
2684
2685         if (nr >= EM28XX_MAXBOARDS) {
2686                 printk(DRIVER_NAME ": Supports only %i em28xx boards.\n",
2687                                 EM28XX_MAXBOARDS);
2688                 em28xx_devused &= ~(1<<nr);
2689                 retval = -ENOMEM;
2690                 goto err;
2691         }
2692
2693         /* allocate memory for our device state and initialize it */
2694         dev = kzalloc(sizeof(*dev), GFP_KERNEL);
2695         if (dev == NULL) {
2696                 em28xx_err(DRIVER_NAME ": out of memory!\n");
2697                 em28xx_devused &= ~(1<<nr);
2698                 retval = -ENOMEM;
2699                 goto err;
2700         }
2701
2702         snprintf(dev->name, 29, "em28xx #%d", nr);
2703         dev->devno = nr;
2704         dev->model = id->driver_info;
2705         dev->alt   = -1;
2706
2707         /* Checks if audio is provided by some interface */
2708         for (i = 0; i < udev->config->desc.bNumInterfaces; i++) {
2709                 uif = udev->config->interface[i];
2710                 if (uif->altsetting[0].desc.bInterfaceClass == USB_CLASS_AUDIO) {
2711                         dev->has_audio_class = 1;
2712                         break;
2713                 }
2714         }
2715
2716         /* compute alternate max packet sizes */
2717         uif = udev->actconfig->interface[0];
2718
2719         dev->num_alt = uif->num_altsetting;
2720         dev->alt_max_pkt_size = kmalloc(32 * dev->num_alt, GFP_KERNEL);
2721
2722         if (dev->alt_max_pkt_size == NULL) {
2723                 em28xx_errdev("out of memory!\n");
2724                 em28xx_devused &= ~(1<<nr);
2725                 kfree(dev);
2726                 retval = -ENOMEM;
2727                 goto err;
2728         }
2729
2730         for (i = 0; i < dev->num_alt ; i++) {
2731                 u16 tmp = le16_to_cpu(uif->altsetting[i].endpoint[isoc_pipe].desc.wMaxPacketSize);
2732                 dev->alt_max_pkt_size[i] =
2733                     (tmp & 0x07ff) * (((tmp & 0x1800) >> 11) + 1);
2734         }
2735
2736         if ((card[nr] >= 0) && (card[nr] < em28xx_bcount))
2737                 dev->model = card[nr];
2738
2739         /* allocate device struct */
2740         mutex_init(&dev->lock);
2741         mutex_lock(&dev->lock);
2742         retval = em28xx_init_dev(&dev, udev, interface, nr);
2743         if (retval) {
2744                 em28xx_devused &= ~(1<<dev->devno);
2745                 mutex_unlock(&dev->lock);
2746                 kfree(dev);
2747                 goto err;
2748         }
2749
2750         /* save our data pointer in this interface device */
2751         usb_set_intfdata(interface, dev);
2752
2753         request_modules(dev);
2754
2755         /* Should be the last thing to do, to avoid newer udev's to
2756            open the device before fully initializing it
2757          */
2758         mutex_unlock(&dev->lock);
2759
2760         return 0;
2761
2762 err:
2763         return retval;
2764 }
2765
2766 /*
2767  * em28xx_usb_disconnect()
2768  * called when the device gets diconencted
2769  * video device will be unregistered on v4l2_close in case it is still open
2770  */
2771 static void em28xx_usb_disconnect(struct usb_interface *interface)
2772 {
2773         struct em28xx *dev;
2774
2775         dev = usb_get_intfdata(interface);
2776         usb_set_intfdata(interface, NULL);
2777
2778         if (!dev)
2779                 return;
2780
2781         em28xx_info("disconnecting %s\n", dev->vdev->name);
2782
2783         /* wait until all current v4l2 io is finished then deallocate
2784            resources */
2785         mutex_lock(&dev->lock);
2786
2787         wake_up_interruptible_all(&dev->open);
2788
2789         v4l2_device_disconnect(&dev->v4l2_dev);
2790
2791         if (dev->users) {
2792                 em28xx_warn
2793                     ("device /dev/video%d is open! Deregistration and memory "
2794                      "deallocation are deferred on close.\n",
2795                                 dev->vdev->num);
2796
2797                 dev->state |= DEV_MISCONFIGURED;
2798                 em28xx_uninit_isoc(dev);
2799                 dev->state |= DEV_DISCONNECTED;
2800                 wake_up_interruptible(&dev->wait_frame);
2801                 wake_up_interruptible(&dev->wait_stream);
2802         } else {
2803                 dev->state |= DEV_DISCONNECTED;
2804                 em28xx_release_resources(dev);
2805         }
2806
2807         em28xx_close_extension(dev);
2808
2809         mutex_unlock(&dev->lock);
2810
2811         if (!dev->users) {
2812                 kfree(dev->alt_max_pkt_size);
2813                 kfree(dev);
2814         }
2815 }
2816
2817 static struct usb_driver em28xx_usb_driver = {
2818         .name = "em28xx",
2819         .probe = em28xx_usb_probe,
2820         .disconnect = em28xx_usb_disconnect,
2821         .id_table = em28xx_id_table,
2822 };
2823
2824 static int __init em28xx_module_init(void)
2825 {
2826         int result;
2827
2828         /* register this driver with the USB subsystem */
2829         result = usb_register(&em28xx_usb_driver);
2830         if (result)
2831                 em28xx_err(DRIVER_NAME
2832                            " usb_register failed. Error number %d.\n", result);
2833
2834         printk(KERN_INFO DRIVER_NAME " driver loaded\n");
2835
2836         return result;
2837 }
2838
2839 static void __exit em28xx_module_exit(void)
2840 {
2841         /* deregister this driver with the USB subsystem */
2842         usb_deregister(&em28xx_usb_driver);
2843 }
2844
2845 module_init(em28xx_module_init);
2846 module_exit(em28xx_module_exit);