2 # Multifunction miscellaneous devices
5 menu "Multifunction device drivers"
13 bool "Support Marvell 88PM8606/88PM8607"
17 This supports for Marvell 88PM8606/88PM8607 Power Management IC.
18 This includes the I2C driver and the core APIs _only_, you have to
19 select individual components like voltage regulators, RTC and
20 battery-charger under the corresponding menus.
23 tristate "Support for Silicon Motion SM501"
25 This is the core driver for the Silicon Motion SM501 multimedia
26 companion chip. This device is a multifunction device which may
27 provide numerous interfaces including USB host controller, USB gadget,
28 asynchronous serial ports, audio functions, and a dual display video
29 interface. The device may be connected by PCI or local bus with
30 varying functions enabled.
33 bool "Export GPIO via GPIO layer"
34 depends on MFD_SM501 && GPIOLIB
36 This option uses the gpio library layer to export the 64 GPIO
37 lines on the SM501. The platform data is used to supply the
38 base number for the first GPIO line to register.
41 bool "Support for Compaq ASIC3"
42 depends on GENERIC_HARDIRQS && GPIOLIB && ARM
45 This driver supports the ASIC3 multifunction chip found on many
46 PDAs (mainly iPAQ and HTC based ones)
48 config MFD_SH_MOBILE_SDHI
49 bool "Support for SuperH Mobile SDHI"
53 This driver supports the SDHI hardware block found in many
56 config MFD_DM355EVM_MSP
57 bool "DaVinci DM355 EVM microcontroller"
58 depends on I2C && MACH_DAVINCI_DM355_EVM
60 This driver supports the MSP430 microcontroller used on these
61 boards. MSP430 firmware manages resets and power sequencing,
62 inputs from buttons and the IR remote, LEDs, an RTC, and more.
65 bool "HTC EGPIO support"
66 depends on GENERIC_HARDIRQS && GPIOLIB && ARM
68 This driver supports the CPLD egpio chip present on
69 several HTC phones. It provides basic support for input
70 pins, output pins, and irqs.
73 tristate "HTC PASIC3 LED/DS1WM chip support"
76 This core driver provides register access for the LED/DS1WM
77 chips labeled "AIC2" and "AIC3", found on HTC Blueangel and
78 HTC Magician devices, respectively. Actual functionality is
79 handled by the leds-pasic3 and ds1wm drivers.
82 bool "HTC I2C PLD chip support"
85 If you say yes here you get support for the supposed CPLD
86 found on omap850 HTC devices like the HTC Wizard and HTC Herald.
87 This device provides input and output GPIOs through an I2C
88 interface to one or more sub-chips.
91 tristate "Philips UCB1400 Core driver"
95 This enables support for the Philips UCB1400 core functions.
96 The UCB1400 is an AC97 audio codec.
98 To compile this driver as a module, choose M here: the
99 module will be called ucb1400_core.
102 tristate "TPS6501x Power Management chips"
103 depends on I2C && GPIOLIB
104 default y if MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_OMAP_OSK
106 If you say yes here you get support for the TPS6501x series of
107 Power Management chips. These include voltage regulators,
108 lithium ion/polymer battery charging, and other features that
109 are often used in portable devices like cell phones and cameras.
111 This driver can also be built as a module. If so, the module
112 will be called tps65010.
115 bool "Texas Instruments TWL92330/Menelaus PM chip"
116 depends on I2C=y && ARCH_OMAP2
118 If you say yes here you get support for the Texas Instruments
119 TWL92330/Menelaus Power Management chip. This include voltage
120 regulators, Dual slot memory card transceivers, real-time clock
121 and other features that are often used in portable devices like
122 cell phones and PDAs.
125 bool "Texas Instruments TWL4030/TWL5030/TWL6030/TPS659x0 Support"
126 depends on I2C=y && GENERIC_HARDIRQS
128 Say yes here if you have TWL4030 / TWL6030 family chip on your board.
129 This core driver provides register access and IRQ handling
130 facilities, and registers devices for the various functions
131 so that function-specific drivers can bind to them.
133 These multi-function chips are found on many OMAP2 and OMAP3
134 boards, providing power management, RTC, GPIO, keypad, a
135 high speed USB OTG transceiver, an audio codec (on most
136 versions) and many other features.
139 bool "Support power resources on TWL4030 family chips"
140 depends on TWL4030_CORE && ARM
142 Say yes here if you want to use the power resources on the
143 TWL4030 family chips. Most of these resources are regulators,
144 which have a separate driver; some are control signals, such
145 as clock request handshaking.
147 This driver uses board-specific data to initialize the resources
148 and load scripts controling which resources are switched off/on
149 or reset when a sleep, wakeup or warm reset event occurs.
153 depends on TWL4030_CORE
162 bool "Support Toshiba T7L66XB"
163 depends on ARM && HAVE_CLK
167 Support for Toshiba Mobile IO Controller T7L66XB
170 bool "Support Toshiba TC6387XB"
171 depends on ARM && HAVE_CLK
175 Support for Toshiba Mobile IO Controller TC6387XB
178 bool "Support Toshiba TC6393XB"
179 depends on GPIOLIB && ARM
183 Support for Toshiba Mobile IO Controller TC6393XB
186 bool "Dialog Semiconductor DA9030/DA9034 PMIC Support"
189 Say yes here to support for Dialog Semiconductor DA9030 (a.k.a
190 ARAVA) and DA9034 (a.k.a MICCO), these are Power Management IC
191 usually found on PXA processors-based platforms. This includes
192 the I2C driver and the core APIs _only_, you have to select
193 individual components like LCD backlight, voltage regulators,
194 LEDs and battery-charger under the corresponding menus.
197 bool "Analog Devices ADP5520/01 MFD PMIC Core Support"
200 Say yes here to add support for Analog Devices AD5520 and ADP5501,
201 Multifunction Power Management IC. This includes
202 the I2C driver and the core APIs _only_, you have to select
203 individual components like LCD backlight, LEDs, GPIOs and Kepad
204 under the corresponding menus.
207 tristate "Maxim Semiconductor MAX8925 PMIC Support"
211 Say yes here to support for Maxim Semiconductor MAX8925. This is
212 a Power Management IC. This driver provies common support for
213 accessing the device, additional drivers must be enabled in order
214 to use the functionality of the device.
217 tristate "Support Wolfson Microelectronics WM8400"
221 Support for the Wolfson Microelecronics WM8400 PMIC and audio
222 CODEC. This driver provides common support for accessing
223 the device, additional drivers must be enabled in order to use
224 the functionality of the device.
227 bool "Support Wolfson Microelectronics WM831x/2x PMICs"
231 Support for the Wolfson Microelecronics WM831x and WM832x PMICs.
232 This driver provides common support for accessing the device,
233 additional drivers must be enabled in order to use the
234 functionality of the device.
239 config MFD_WM8350_CONFIG_MODE_0
241 depends on MFD_WM8350
243 config MFD_WM8350_CONFIG_MODE_1
245 depends on MFD_WM8350
247 config MFD_WM8350_CONFIG_MODE_2
249 depends on MFD_WM8350
251 config MFD_WM8350_CONFIG_MODE_3
253 depends on MFD_WM8350
255 config MFD_WM8351_CONFIG_MODE_0
257 depends on MFD_WM8350
259 config MFD_WM8351_CONFIG_MODE_1
261 depends on MFD_WM8350
263 config MFD_WM8351_CONFIG_MODE_2
265 depends on MFD_WM8350
267 config MFD_WM8351_CONFIG_MODE_3
269 depends on MFD_WM8350
271 config MFD_WM8352_CONFIG_MODE_0
273 depends on MFD_WM8350
275 config MFD_WM8352_CONFIG_MODE_1
277 depends on MFD_WM8350
279 config MFD_WM8352_CONFIG_MODE_2
281 depends on MFD_WM8350
283 config MFD_WM8352_CONFIG_MODE_3
285 depends on MFD_WM8350
287 config MFD_WM8350_I2C
288 bool "Support Wolfson Microelectronics WM8350 with I2C"
292 The WM8350 is an integrated audio and power management
293 subsystem with watchdog and RTC functionality for embedded
294 systems. This option enables core support for the WM8350 with
295 I2C as the control interface. Additional options must be
296 selected to enable support for the functionality of the chip.
299 tristate "Support for NXP PCF50633"
302 Say yes here if you have NXP PCF50633 chip on your board.
303 This core driver provides register access and IRQ handling
304 facilities, and registers devices for the various functions
305 so that function-specific drivers can bind to them.
308 tristate "Support Freescale MC13783"
309 depends on SPI_MASTER
312 Support for the Freescale (Atlas) MC13783 PMIC and audio CODEC.
313 This driver provides common support for accessing the device,
314 additional drivers must be enabled in order to use the
315 functionality of the device.
318 tristate "Support for NXP PCF50633 ADC"
319 depends on MFD_PCF50633
321 Say yes here if you want to include support for ADC in the
325 tristate "Support for NXP PCF50633 GPIO"
326 depends on MFD_PCF50633
328 Say yes here if you want to include support GPIO for pins on
332 tristate "ST-Ericsson AB3100 Mixed Signal Circuit core functions"
334 default y if ARCH_U300
336 Select this to enable the AB3100 Mixed Signal IC core
337 functionality. This connects to a AB3100 on the I2C bus
338 and expose a number of symbols needed for dependent devices
339 to read and write registers and subscribe to events from
340 this multi-functional IC. This is needed to use other features
341 of the AB3100 such as battery-backed RTC, charging control,
342 LEDs, vibrator, system power and temperature, power management
346 tristate "ST-Ericsson AB3100 OTP functions"
347 depends on AB3100_CORE
348 default y if AB3100_CORE
350 Select this to enable the AB3100 Mixed Signal IC OTP (one-time
351 programmable memory) support. This exposes a sysfs file to read
356 depends on GENERIC_HARDIRQS && SPI_MASTER
358 This enables the PCAP ASIC present on EZX Phones. This is
359 needed for MMC, TouchScreen, Sound, USB, etc..
362 tristate "ST-Ericsson's AB4500 Mixed Signal Power management chip"
365 Select this option to enable access to AB4500 power management
366 chip. This connects to U8500 on the SSP/SPI bus and exports
367 read/write functions for the devices to get access to this chip.
368 This chip embeds various other multimedia funtionalities as well.
370 config MFD_TIMBERDALE
371 tristate "Support for the Timberdale FPGA"
373 depends on PCI && GPIOLIB
375 This is the core driver for the timberdale FPGA. This device is a
376 multifunction device which exposes numerous platform devices.
378 The timberdale FPGA can be found on the Intel Atom development board
379 for in-vehicle infontainment, called Russellville.
382 menu "Multimedia Capabilities Port drivers"
383 depends on ARCH_SA1100
390 tristate "Support SA11x0 MCP interface"
391 depends on ARCH_SA1100
396 tristate "Support for UCB1200 / UCB1300"
399 config MCP_UCB1200_TS
400 tristate "Touchscreen interface support"
401 depends on MCP_UCB1200 && INPUT