5 menuconfig MISC_DEVICES
9 Say Y here to get to see options for device drivers from various
10 different categories. This option alone does not add any kernel code.
12 If you say N, all options in this submenu will be skipped and disabled.
17 tristate "Analog Devices Digital Potentiometers"
18 depends on (I2C || SPI) && SYSFS
20 If you say yes here, you get support for the Analog Devices
21 AD5258, AD5259, AD5251, AD5252, AD5253, AD5254, AD5255
22 AD5160, AD5161, AD5162, AD5165, AD5200, AD5201, AD5203,
23 AD5204, AD5206, AD5207, AD5231, AD5232, AD5233, AD5235,
24 AD5260, AD5262, AD5263, AD5290, AD5291, AD5292, AD5293,
25 AD7376, AD8400, AD8402, AD8403, ADN2850, AD5241, AD5242,
26 AD5243, AD5245, AD5246, AD5247, AD5248, AD5280, AD5282,
27 ADN2860, AD5273, AD5171, AD5170, AD5172, AD5173
28 digital potentiometer chips.
30 See Documentation/misc-devices/ad525x_dpot.txt for the
33 This driver can also be built as a module. If so, the module
34 will be called ad525x_dpot.
36 config AD525X_DPOT_I2C
37 tristate "support I2C bus connection"
38 depends on AD525X_DPOT && I2C
40 Say Y here if you have a digital potentiometers hooked to an I2C bus.
42 To compile this driver as a module, choose M here: the
43 module will be called ad525x_dpot-i2c.
45 config AD525X_DPOT_SPI
46 tristate "support SPI bus connection"
47 depends on AD525X_DPOT && SPI_MASTER
49 Say Y here if you have a digital potentiometers hooked to an SPI bus.
51 If unsure, say N (but it's safe to say "Y").
53 To compile this driver as a module, choose M here: the
54 module will be called ad525x_dpot-spi.
57 bool "Android pmem allocator"
61 tristate "Atmel AT32/AT91 PWM support"
62 depends on AVR32 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_AT91CAP9
64 This option enables device driver support for the PWM channels
65 on certain Atmel processors. Pulse Width Modulation is used for
66 purposes including software controlled power-efficient backlights
67 on LCD displays, motor control, and waveform generation.
70 bool "Atmel AT32/AT91 Timer/Counter Library"
71 depends on (AVR32 || ARCH_AT91)
73 Select this if you want a library to allocate the Timer/Counter
74 blocks found on many Atmel processors. This facilitates using
75 these blocks by different drivers despite processor differences.
77 config ATMEL_TCB_CLKSRC
78 bool "TC Block Clocksource"
79 depends on ATMEL_TCLIB
82 Select this to get a high precision clocksource based on a
83 TC block with a 5+ MHz base clock rate. Two timer channels
84 are combined to make a single 32-bit timer.
86 When GENERIC_CLOCKEVENTS is defined, the third timer channel
87 may be used as a clock event device supporting oneshot mode
88 (delays of up to two seconds) based on the 32 KiHz clock.
90 config ATMEL_TCB_CLKSRC_BLOCK
92 depends on ATMEL_TCB_CLKSRC
93 prompt "TC Block" if ARCH_AT91RM9200 || ARCH_AT91SAM9260 || CPU_AT32AP700X
97 Some chips provide more than one TC block, so you have the
98 choice of which one to use for the clock framework. The other
99 TC can be used for other purposes, such as PWM generation and
103 tristate "Device driver for IBM RSA service processor"
104 depends on X86 && PCI && INPUT && EXPERIMENTAL
106 This option enables device driver support for in-band access to the
107 IBM RSA (Condor) service processor in eServer xSeries systems.
108 The ibmasm device driver allows user space application to access
109 ASM (Advanced Systems Management) functions on the service
110 processor. The driver is meant to be used in conjunction with
112 The ibmasm driver also enables the OS to use the UART on the
113 service processor board as a regular serial port. To make use of
114 this feature serial driver support (CONFIG_SERIAL_8250) must be
117 WARNING: This software may not be supported or function
118 correctly on your IBM server. Please consult the IBM ServerProven
119 website <http://www.pc.ibm.com/ww/eserver/xseries/serverproven> for
120 information on the specific driver level and support statement
124 tristate "Sensable PHANToM (PCI)"
127 Say Y here if you want to build a driver for Sensable PHANToM device.
129 This driver is only for PCI PHANToMs.
131 If you choose to build module, its name will be phantom. If unsure,
135 tristate "SGI IOC4 Base IO support"
138 This option enables basic support for the IOC4 chip on certain
139 SGI IO controller cards (IO9, IO10, and PCI-RT). This option
140 does not enable any specific functions on such a card, but provides
141 necessary infrastructure for other drivers to utilize.
143 If you have an SGI Altix with an IOC4-based card say Y.
147 tristate "TI Flash Media interface support (EXPERIMENTAL)"
148 depends on EXPERIMENTAL && PCI
150 If you want support for Texas Instruments(R) Flash Media adapters
151 you should select this option and then also choose an appropriate
152 host adapter, such as 'TI Flash Media PCI74xx/PCI76xx host adapter
153 support', if you have a TI PCI74xx compatible card reader, for
155 You will also have to select some flash card format drivers. MMC/SD
156 cards are supported via 'MMC/SD Card support: TI Flash Media MMC/SD
157 Interface support (MMC_TIFM_SD)'.
159 To compile this driver as a module, choose M here: the module will
163 tristate "TI Flash Media PCI74xx/PCI76xx host adapter support (EXPERIMENTAL)"
164 depends on PCI && TIFM_CORE && EXPERIMENTAL
167 This option enables support for Texas Instruments(R) PCI74xx and
168 PCI76xx families of Flash Media adapters, found in many laptops.
169 To make actual use of the device, you will have to select some
170 flash card format drivers, as outlined in the TIFM_CORE Help.
172 To compile this driver as a module, choose M here: the module will
176 tristate "Integrated Circuits ICS932S401"
177 depends on I2C && EXPERIMENTAL
179 If you say yes here you get support for the Integrated Circuits
180 ICS932S401 clock control chips.
182 This driver can also be built as a module. If so, the module
183 will be called ics932s401.
186 tristate "Device driver for Atmel SSC peripheral"
187 depends on AVR32 || ARCH_AT91
189 This option enables device driver support for Atmel Synchronized
190 Serial Communication peripheral (SSC).
192 The SSC peripheral supports a wide variety of serial frame based
193 communications, i.e. I2S, SPI, etc.
197 config ENCLOSURE_SERVICES
198 tristate "Enclosure Services"
201 Provides support for intelligent enclosures (bays which
202 contain storage devices). You also need either a host
203 driver (SCSI/ATA) which supports enclosures
204 or a SCSI enclosure device (SES) to use these services.
206 config KERNEL_DEBUGGER_CORE
207 bool "Kernel Debugger Core"
210 Generic kernel debugging command processor used by low level
211 (interrupt context) platform-specific debuggers.
214 tristate "Support communication between SGI SSIs"
216 depends on (IA64_GENERIC || IA64_SGI_SN2 || IA64_SGI_UV || X86_UV) && SMP
217 select IA64_UNCACHED_ALLOCATOR if IA64_GENERIC || IA64_SGI_SN2
218 select GENERIC_ALLOCATOR if IA64_GENERIC || IA64_SGI_SN2
219 select SGI_GRU if X86_64 && SMP
221 An SGI machine can be divided into multiple Single System
222 Images which act independently of each other and have
223 hardware based memory protection from the others. Enabling
224 this feature will allow for direct communication between SSIs
225 based on a network adapter and DMA messaging.
228 tristate "CS5535/CS5536 Geode Multi-Function General Purpose Timer (MFGPT) support"
233 This driver provides access to MFGPT functionality for other
234 drivers that need timers. MFGPTs are available in the CS5535 and
235 CS5536 companion chips that are found in AMD Geode and several
236 other platforms. They have a better resolution and max interval
237 than the generic PIT, and are suitable for use as high-res timers.
238 You probably don't want to enable this manually; other drivers that
239 make use of it should enable it.
241 config CS5535_MFGPT_DEFAULT_IRQ
243 depends on CS5535_MFGPT
246 MFGPTs on the CS5535 require an interrupt. The selected IRQ
247 can be overridden as a module option as well as by driver that
248 use the cs5535_mfgpt_ API; however, different architectures might
249 want to use a different IRQ by default. This is here for
250 architectures to set as necessary.
252 config CS5535_CLOCK_EVENT_SRC
253 tristate "CS5535/CS5536 high-res timer (MFGPT) events"
254 depends on GENERIC_CLOCKEVENTS && CS5535_MFGPT
256 This driver provides a clock event source based on the MFGPT
257 timer(s) in the CS5535 and CS5536 companion chips.
258 MFGPTs have a better resolution and max interval than the
259 generic PIT, and are suitable for use as high-res timers.
262 tristate "Channel interface driver for HP iLO/iLO2 processor"
266 The channel interface driver allows applications to communicate
267 with iLO/iLO2 management processors present on HP ProLiant
268 servers. Upon loading, the driver creates /dev/hpilo/dXccbN files,
269 which can be used to gather data from the management processor,
270 via read and write system calls.
272 To compile this driver as a module, choose M here: the
273 module will be called hpilo.
276 tristate "SGI GRU driver"
277 depends on X86_UV && SMP
281 The GRU is a hardware resource located in the system chipset. The GRU
282 contains memory that can be mmapped into the user address space. This memory is
283 used to communicate with the GRU to perform functions such as load/store,
284 scatter/gather, bcopy, AMOs, etc. The GRU is directly accessed by user
285 instructions using user virtual addresses. GRU instructions (ex., bcopy) use
286 user virtual addresses for operands.
288 If you are not running on a SGI UV system, say N.
291 bool "SGI GRU driver debug"
295 This option enables addition debugging code for the SGI GRU driver. If
296 you are unsure, say N.
299 tristate "Intersil ISL29003 ambient light sensor"
300 depends on I2C && SYSFS
302 If you say yes here you get support for the Intersil ISL29003
303 ambient light sensor.
305 This driver can also be built as a module. If so, the module
306 will be called isl29003.
308 config SENSORS_TSL2550
309 tristate "Taos TSL2550 ambient light sensor"
310 depends on I2C && SYSFS
312 If you say yes here you get support for the Taos TSL2550
313 ambient light sensor.
315 This driver can also be built as a module. If so, the module
316 will be called tsl2550.
318 config SENSORS_BH1780
319 tristate "ROHM BH1780GLI ambient light sensor"
320 depends on I2C && SYSFS
322 If you say yes here you get support for the ROHM BH1780GLI
323 ambient light sensor.
325 This driver can also be built as a module. If so, the module
326 will be called bh1780gli.
329 tristate "Honeywell HMC6352 compass"
332 This driver provides support for the Honeywell HMC6352 compass,
333 providing configuration and heading data via sysfs.
335 config SENSORS_AK8975
336 tristate "AK8975 compass support"
340 If you say yes here you get support for Asahi Kasei's
341 orientation sensor AK8975.
343 config SENSORS_CAP_PROX
344 tristate "Motorola Capacitive Proximity Sensor"
348 Say yes here if you wish to include the Motorola
349 Capacitive Proximity Sensor driver.
352 tristate "KXTF9 Accelerometer"
356 Say yes here if you wish to include the Kionix
357 KXTF9 accelerometer driver.
359 config SENSORS_L3G4200D
360 tristate "ST Micro Gyroscope"
364 Say yes here if you wish to include the ST Micro
365 L3G4200D gyroscope driver.
367 config SENSORS_MAX9635
368 tristate "Maxim Ambient Light Sensor"
372 Say yes here if you wish to include the Maxim
373 MAX9635 ambient light sensor driver.
375 config SENSORS_NCT1008
376 tristate "ON Semiconductor Temperature Sensor"
380 Say yes here if you wish to include the ON Semiconductor
381 NCT1008 Temperature sensor.
383 config SENSORS_MOTO_BMP085
384 tristate "BMP085 Barometer (moto driver)"
388 Say yes here if you wish to include the Bosch
389 BMP085 barometer driver.
392 tristate "EP93xx PWM support"
393 depends on ARCH_EP93XX
395 This option enables device driver support for the PWM channels
396 on the Cirrus EP93xx processors. The EP9307 chip only has one
397 PWM channel all the others have two, the second channel is an
398 alternate function of the EGPIO14 pin. A sysfs interface is
399 provided to control the PWM channels.
401 To compile this driver as a module, choose M here: the module will
402 be called ep93xx_pwm.
405 bool "STE modem control driver"
408 bool "MTK6223D modem control driver"
411 bool "FM rda580x driver"
414 bool "MU509 modem control driver"
417 bool "RK29_NEWTON misc driver"
420 tristate "Dallas DS1682 Total Elapsed Time Recorder with Alarm"
421 depends on I2C && EXPERIMENTAL
423 If you say yes here you get support for Dallas Semiconductor
424 DS1682 Total Elapsed Time Recorder.
426 This driver can also be built as a module. If so, the module
427 will be called ds1682.
430 tristate "Texas Instruments DAC7512"
431 depends on SPI && SYSFS
433 If you say yes here you get support for the Texas Instruments
434 DAC7512 16-bit digital-to-analog converter.
436 This driver can also be built as a module. If so, the module
437 will be calles ti_dac7512.
440 bool "UID based statistics tracking exported to /proc/uid_stat"
443 config VMWARE_BALLOON
444 tristate "VMware Balloon Driver"
447 This is VMware physical memory management driver which acts
448 like a "balloon" that can be inflated to reclaim physical pages
449 by reserving them in the guest and invalidating them in the
450 monitor, freeing up the underlying machine pages so they can
451 be allocated to other guests. The balloon can also be deflated
452 to allow the guest to use more physical memory.
456 To compile this driver as a module, choose M here: the
457 module will be called vmw_balloon.
460 bool "ARM Ltd. Character LCD Driver"
461 depends on PLAT_VERSATILE
463 This is a driver for the character LCD found on the ARM Ltd.
464 Versatile and RealView Platform Baseboards. It doesn't do
465 very much more than display the text "ARM Linux" on the first
466 line and the Linux version on the second line, but that's
470 tristate "BMP085 digital pressure sensor"
471 depends on I2C && SYSFS
473 If you say yes here you get support for the Bosch Sensortec
474 BMP086 digital pressure sensor.
476 To compile this driver as a module, choose M here: the
477 module will be called bmp085.
480 tristate "Bluetooth power control driver for TI wl127x"
484 Creates an rfkill entry in sysfs for power control of Bluetooth
488 bool "Android kernel panic diagnostics driver"
491 Driver which handles kernel panics and attempts to write
492 critical debugging data to flash.
495 string "Android panic dump flash partition label"
499 If your platform uses a different flash partition label for storing
500 crashdumps, enter it here.
502 config GPS_GPIO_BRCM4750
503 bool "Enable gpio controller for GPS brcm 4750"
506 Adds GPIO controller driver for GPS Broadcom 4750 chipset
508 config TEGRA_CRYPTO_DEV
509 bool "Device node to access tegra aes hardware"
511 Dev node /dev/tegra-crypto in order to get access to tegra aes
512 hardware from user space
514 source "drivers/misc/c2port/Kconfig"
515 source "drivers/misc/eeprom/Kconfig"
516 source "drivers/misc/cb710/Kconfig"
517 source "drivers/misc/rk29_modem/Kconfig"
518 source "drivers/misc/gps/Kconfig"
519 source "drivers/misc/mpu3050/Kconfig"
520 source "drivers/misc/ts27010mux/Kconfig"
521 source "drivers/misc/iwmc3200top/Kconfig"
522 source "drivers/misc/radio_ctrl/Kconfig"