2 * Synopsys DesignWare Multimedia Card Interface driver
3 * (Based on NXP driver for lpc 31xx)
5 * Copyright (C) 2009 NXP Semiconductors
6 * Copyright (C) 2009, 2010 Imagination Technologies Ltd.
7 * Copyright (C) 2014 - 2015 Fuzhou Rockchip Electronics Co.Ltd.
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License as published by
11 * the Free Software Foundation; either version 2 of the License, or
12 * (at your option) any later version.
15 #include <linux/blkdev.h>
16 #include <linux/clk.h>
17 #include <linux/debugfs.h>
18 #include <linux/device.h>
19 #include <linux/dma-mapping.h>
20 #include <linux/dmaengine.h>
21 #include <linux/err.h>
22 #include <linux/init.h>
23 #include <linux/interrupt.h>
24 #include <linux/ioport.h>
25 #include <linux/module.h>
26 #include <linux/platform_device.h>
27 #include <linux/seq_file.h>
28 #include <linux/slab.h>
29 #include <linux/stat.h>
30 #include <linux/delay.h>
31 #include <linux/irq.h>
32 #include <linux/suspend.h>
33 #include <linux/mmc/host.h>
34 #include <linux/mmc/mmc.h>
35 #include <linux/mmc/sd.h>
36 #include <linux/mmc/card.h>
37 #include <linux/mmc/sdio.h>
38 #include <linux/mmc/rk_mmc.h>
39 #include <linux/bitops.h>
40 #include <linux/regulator/consumer.h>
41 #include <linux/workqueue.h>
43 #include <linux/of_gpio.h>
44 #include <linux/mmc/slot-gpio.h>
45 #include <linux/clk-private.h>
46 #include <linux/rockchip/cpu.h>
47 #include <linux/rfkill-wlan.h>
48 #include <linux/mfd/syscon.h>
49 #include <linux/regmap.h>
50 #include <linux/log2.h>
51 #include <asm-generic/dma-mapping-common.h>
53 #include "rk_sdmmc_dbg.h"
54 #include <linux/regulator/rockchip_io_vol_domain.h>
55 #include "../../clk/rockchip/clk-ops.h"
57 #define RK_SDMMC_DRIVER_VERSION "Ver 2.00 2015-06-10"
59 /* Common flag combinations */
60 #define DW_MCI_DATA_ERROR_FLAGS (SDMMC_INT_DRTO | SDMMC_INT_DCRC | \
63 #define DW_MCI_CMD_ERROR_FLAGS (SDMMC_INT_RTO | SDMMC_INT_RCRC | \
65 #define DW_MCI_ERROR_FLAGS (DW_MCI_DATA_ERROR_FLAGS | \
66 DW_MCI_CMD_ERROR_FLAGS | SDMMC_INT_HLE)
67 #define DW_MCI_SEND_STATUS 1
68 #define DW_MCI_RECV_STATUS 2
69 #define DW_MCI_DMA_THRESHOLD 16
70 #define DW_MCI_FREQ_MAX 50000000 /* unit: HZ */
71 #define DW_MCI_FREQ_MIN 300000 /* unit: HZ */
73 /* Max is 250ms showed in Spec */
74 #define SDMMC_DATA_TIMEOUT_SD 500
75 #define SDMMC_DATA_TIMEOUT_SDIO 250
76 #define SDMMC_DATA_TIMEOUT_EMMC 2500
77 #define SDMMC_CMD_RTO_MAX_HOLD 200
78 #define SDMMC_WAIT_FOR_UNBUSY 2500
80 #define DW_REGS_SIZE (0x0098 + 4)
81 #define DW_REGS_NUM (0x0098 / 4)
83 #ifdef CONFIG_MMC_DW_IDMAC
84 #define IDMAC_INT_CLR (SDMMC_IDMAC_INT_AI | SDMMC_IDMAC_INT_NI | \
85 SDMMC_IDMAC_INT_CES | SDMMC_IDMAC_INT_DU | \
86 SDMMC_IDMAC_INT_FBE | SDMMC_IDMAC_INT_RI | \
90 u32 des0; /* Control Descriptor */
91 #define IDMAC_DES0_DIC BIT(1)
92 #define IDMAC_DES0_LD BIT(2)
93 #define IDMAC_DES0_FD BIT(3)
94 #define IDMAC_DES0_CH BIT(4)
95 #define IDMAC_DES0_ER BIT(5)
96 #define IDMAC_DES0_CES BIT(30)
97 #define IDMAC_DES0_OWN BIT(31)
99 u32 des1; /* Buffer sizes */
100 #define IDMAC_SET_BUFFER1_SIZE(d, s) \
101 ((d)->des1 = ((d)->des1 & 0x03ffe000) | ((s) & 0x1fff))
103 u32 des2; /* buffer 1 physical address */
105 u32 des3; /* buffer 2 physical address */
107 #endif /* CONFIG_MMC_DW_IDMAC */
110 static inline bool dw_mci_fifo_reset(struct dw_mci *host);
111 static inline bool dw_mci_ctrl_all_reset(struct dw_mci *host);
112 static bool dw_mci_ctrl_reset(struct dw_mci *host, u32 reset);
113 static void dw_mci_disable_low_power(struct dw_mci_slot *slot);
114 extern void rk_send_wakeup_key(void);
116 #if defined(CONFIG_DEBUG_FS)
117 static int dw_mci_req_show(struct seq_file *s, void *v)
119 struct dw_mci_slot *slot = s->private;
120 struct mmc_request *mrq;
121 struct mmc_command *cmd;
122 struct mmc_command *stop;
123 struct mmc_data *data;
125 /* Make sure we get a consistent snapshot */
126 spin_lock_bh(&slot->host->lock);
136 "CMD%u(0x%x) flg %x rsp %x %x %x %x err %d\n",
137 cmd->opcode, cmd->arg, cmd->flags,
138 cmd->resp[0], cmd->resp[1], cmd->resp[2],
139 cmd->resp[2], cmd->error);
141 seq_printf(s, "DATA %u / %u * %u flg %x err %d\n",
142 data->bytes_xfered, data->blocks,
143 data->blksz, data->flags, data->error);
146 "CMD%u(0x%x) flg %x rsp %x %x %x %x err %d\n",
147 stop->opcode, stop->arg, stop->flags,
148 stop->resp[0], stop->resp[1], stop->resp[2],
149 stop->resp[2], stop->error);
152 spin_unlock_bh(&slot->host->lock);
157 static int dw_mci_req_open(struct inode *inode, struct file *file)
159 return single_open(file, dw_mci_req_show, inode->i_private);
162 static const struct file_operations dw_mci_req_fops = {
163 .owner = THIS_MODULE,
164 .open = dw_mci_req_open,
167 .release = single_release,
170 static int dw_mci_regs_show(struct seq_file *s, void *v)
172 seq_printf(s, "STATUS:\t0x%08x\n", SDMMC_STATUS);
173 seq_printf(s, "RINTSTS:\t0x%08x\n", SDMMC_RINTSTS);
174 seq_printf(s, "CMD:\t0x%08x\n", SDMMC_CMD);
175 seq_printf(s, "CTRL:\t0x%08x\n", SDMMC_CTRL);
176 seq_printf(s, "INTMASK:\t0x%08x\n", SDMMC_INTMASK);
177 seq_printf(s, "CLKENA:\t0x%08x\n", SDMMC_CLKENA);
182 static int dw_mci_regs_open(struct inode *inode, struct file *file)
184 return single_open(file, dw_mci_regs_show, inode->i_private);
187 static const struct file_operations dw_mci_regs_fops = {
188 .owner = THIS_MODULE,
189 .open = dw_mci_regs_open,
192 .release = single_release,
195 static void dw_mci_init_debugfs(struct dw_mci_slot *slot)
197 struct mmc_host *mmc = slot->mmc;
198 struct dw_mci *host = slot->host;
202 root = mmc->debugfs_root;
206 node = debugfs_create_file("regs", S_IRUSR, root, host,
211 node = debugfs_create_file("req", S_IRUSR, root, slot,
216 node = debugfs_create_u32("state", S_IRUSR, root, (u32 *)&host->state);
220 node = debugfs_create_x32("pending_events", S_IRUSR, root,
221 (u32 *)&host->pending_events);
225 node = debugfs_create_x32("completed_events", S_IRUSR, root,
226 (u32 *)&host->completed_events);
233 dev_err(&mmc->class_dev, "failed to initialize debugfs for slot\n");
235 #endif /* defined(CONFIG_DEBUG_FS) */
237 static void dw_mci_set_timeout(struct dw_mci *host)
239 /* timeout (maximum) */
240 mci_writel(host, TMOUT, 0xffffffff);
243 static u32 dw_mci_prepare_command(struct mmc_host *mmc, struct mmc_command *cmd)
245 struct mmc_data *data;
246 struct dw_mci_slot *slot = mmc_priv(mmc);
247 const struct dw_mci_drv_data *drv_data = slot->host->drv_data;
249 cmd->error = -EINPROGRESS;
253 if (cmdr == MMC_STOP_TRANSMISSION)
254 cmdr |= SDMMC_CMD_STOP;
256 cmdr |= SDMMC_CMD_PRV_DAT_WAIT;
258 if (cmd->flags & MMC_RSP_PRESENT) {
259 /* We expect a response, so set this bit */
260 cmdr |= SDMMC_CMD_RESP_EXP;
261 if (cmd->flags & MMC_RSP_136)
262 cmdr |= SDMMC_CMD_RESP_LONG;
265 if (cmd->flags & MMC_RSP_CRC)
266 cmdr |= SDMMC_CMD_RESP_CRC;
270 cmdr |= SDMMC_CMD_DAT_EXP;
271 if (data->flags & MMC_DATA_STREAM)
272 cmdr |= SDMMC_CMD_STRM_MODE;
273 if (data->flags & MMC_DATA_WRITE)
274 cmdr |= SDMMC_CMD_DAT_WR;
277 if (drv_data && drv_data->prepare_command)
278 drv_data->prepare_command(slot->host, &cmdr);
283 static void dw_mci_start_command(struct dw_mci *host,
284 struct mmc_command *cmd, u32 cmd_flags)
286 struct dw_mci_slot *slot = host->slot[0];
288 host->pre_cmd = host->cmd;
291 "start command: ARGR=0x%08x CMDR=0x%08x\n",
292 cmd->arg, cmd_flags);
294 if(SD_SWITCH_VOLTAGE == cmd->opcode){
295 /*confirm non-low-power mode*/
296 mci_writel(host, CMDARG, 0);
297 dw_mci_disable_low_power(slot);
299 MMC_DBG_INFO_FUNC(host->mmc,"Line%d..%s before start cmd=11,[%s]",
300 __LINE__, __FUNCTION__,mmc_hostname(host->mmc));
302 cmd_flags |= SDMMC_CMD_VOLT_SWITCH;
305 mci_writel(host, CMDARG, cmd->arg);
308 /* Fix the value to 1 in current soc */
309 if(host->mmc->hold_reg_flag)
310 cmd_flags |= SDMMC_CMD_USE_HOLD_REG;
312 mci_writel(host, CMD, cmd_flags | SDMMC_CMD_START);
316 static void send_stop_cmd(struct dw_mci *host, struct mmc_data *data)
318 dw_mci_start_command(host, data->stop, host->stop_cmdr);
321 /* DMA interface functions */
322 static void dw_mci_stop_dma(struct dw_mci *host)
324 if (host->using_dma) {
325 /* Fixme: No need to terminate edma, may cause flush op */
326 if(!(cpu_is_rk3036() || cpu_is_rk312x()))
327 host->dma_ops->stop(host);
328 host->dma_ops->cleanup(host);
331 /* Data transfer was stopped by the interrupt handler */
332 set_bit(EVENT_XFER_COMPLETE, &host->pending_events);
335 static int dw_mci_get_dma_dir(struct mmc_data *data)
337 if (data->flags & MMC_DATA_WRITE)
338 return DMA_TO_DEVICE;
340 return DMA_FROM_DEVICE;
343 #ifdef CONFIG_MMC_DW_IDMAC
344 static void dw_mci_dma_cleanup(struct dw_mci *host)
346 struct mmc_data *data = host->data;
349 if (!data->host_cookie)
350 dma_unmap_sg(host->dev,
353 dw_mci_get_dma_dir(data));
356 static void dw_mci_idmac_reset(struct dw_mci *host)
358 u32 bmod = mci_readl(host, BMOD);
359 /* Software reset of DMA */
360 bmod |= SDMMC_IDMAC_SWRESET;
361 mci_writel(host, BMOD, bmod);
364 static void dw_mci_idmac_stop_dma(struct dw_mci *host)
368 /* Disable and reset the IDMAC interface */
369 temp = mci_readl(host, CTRL);
370 temp &= ~SDMMC_CTRL_USE_IDMAC;
371 temp |= SDMMC_CTRL_DMA_RESET;
372 mci_writel(host, CTRL, temp);
374 /* Stop the IDMAC running */
375 temp = mci_readl(host, BMOD);
376 temp &= ~(SDMMC_IDMAC_ENABLE | SDMMC_IDMAC_FB);
377 temp |= SDMMC_IDMAC_SWRESET;
378 mci_writel(host, BMOD, temp);
381 static void dw_mci_idmac_complete_dma(void *arg)
383 struct dw_mci *host = arg;
384 struct mmc_data *data = host->data;
386 dev_vdbg(host->dev, "DMA complete\n");
388 host->dma_ops->cleanup(host);
391 * If the card was removed, data will be NULL. No point in trying to
392 * send the stop command or waiting for NBUSY in this case.
395 set_bit(EVENT_XFER_COMPLETE, &host->pending_events);
396 tasklet_schedule(&host->tasklet);
400 static void dw_mci_translate_sglist(struct dw_mci *host, struct mmc_data *data,
404 struct idmac_desc *desc = host->sg_cpu;
406 for (i = 0; i < sg_len; i++, desc++) {
407 unsigned int length = sg_dma_len(&data->sg[i]);
408 u32 mem_addr = sg_dma_address(&data->sg[i]);
410 /* Set the OWN bit and disable interrupts for this descriptor */
411 desc->des0 = IDMAC_DES0_OWN | IDMAC_DES0_DIC | IDMAC_DES0_CH;
414 IDMAC_SET_BUFFER1_SIZE(desc, length);
416 /* Physical address to DMA to/from */
417 desc->des2 = mem_addr;
420 /* Set first descriptor */
422 desc->des0 |= IDMAC_DES0_FD;
424 /* Set last descriptor */
425 desc = host->sg_cpu + (i - 1) * sizeof(struct idmac_desc);
426 desc->des0 &= ~(IDMAC_DES0_CH | IDMAC_DES0_DIC);
427 desc->des0 |= IDMAC_DES0_LD;
432 static void dw_mci_idmac_start_dma(struct dw_mci *host, unsigned int sg_len)
436 dw_mci_translate_sglist(host, host->data, sg_len);
438 /* Select IDMAC interface */
439 temp = mci_readl(host, CTRL);
440 temp |= SDMMC_CTRL_USE_IDMAC;
441 mci_writel(host, CTRL, temp);
445 /* Enable the IDMAC */
446 temp = mci_readl(host, BMOD);
447 temp |= SDMMC_IDMAC_ENABLE | SDMMC_IDMAC_FB;
448 mci_writel(host, BMOD, temp);
450 /* Start it running */
451 mci_writel(host, PLDMND, 1);
454 static int dw_mci_idmac_init(struct dw_mci *host)
456 struct idmac_desc *p;
459 /* Number of descriptors in the ring buffer */
460 host->ring_size = PAGE_SIZE / sizeof(struct idmac_desc);
462 /* Forward link the descriptor list */
463 for (i = 0, p = host->sg_cpu; i < host->ring_size - 1; i++, p++) {
464 p->des3 = host->sg_dma + (sizeof(struct idmac_desc) * (i + 1));
467 /* Set the last descriptor as the end-of-ring descriptor */
468 p->des3 = host->sg_dma;
469 p->des0 = IDMAC_DES0_ER;
471 dw_mci_idmac_reset(host);
473 /* Mask out interrupts - get Tx & Rx complete only */
474 mci_writel(host, IDSTS, IDMAC_INT_CLR);
475 mci_writel(host, IDINTEN, SDMMC_IDMAC_INT_NI | SDMMC_IDMAC_INT_RI |
478 /* Set the descriptor base address */
479 mci_writel(host, DBADDR, host->sg_dma);
483 static const struct dw_mci_dma_ops dw_mci_idmac_ops = {
484 .init = dw_mci_idmac_init,
485 .start = dw_mci_idmac_start_dma,
486 .stop = dw_mci_idmac_stop_dma,
487 .complete = dw_mci_idmac_complete_dma,
488 .cleanup = dw_mci_dma_cleanup,
492 static void dw_mci_edma_cleanup(struct dw_mci *host)
494 struct mmc_data *data = host->data;
497 if (!data->host_cookie)
498 dma_unmap_sg(host->dev,
499 data->sg, data->sg_len,
500 dw_mci_get_dma_dir(data));
503 static void dw_mci_edmac_stop_dma(struct dw_mci *host)
505 dmaengine_terminate_all(host->dms->ch);
508 static void dw_mci_edmac_complete_dma(void *arg)
510 struct dw_mci *host = arg;
511 struct mmc_data *data = host->data;
513 dev_vdbg(host->dev, "DMA complete\n");
516 if(data->flags & MMC_DATA_READ)
517 /* Invalidate cache after read */
518 dma_sync_sg_for_cpu(mmc_dev(host->mmc), data->sg,
519 data->sg_len, DMA_FROM_DEVICE);
521 host->dma_ops->cleanup(host);
524 * If the card was removed, data will be NULL. No point in trying to
525 * send the stop command or waiting for NBUSY in this case.
528 set_bit(EVENT_XFER_COMPLETE, &host->pending_events);
529 tasklet_schedule(&host->tasklet);
533 static void dw_mci_edmac_start_dma(struct dw_mci *host, unsigned int sg_len)
535 struct dma_slave_config slave_config;
536 struct dma_async_tx_descriptor *desc = NULL;
537 struct scatterlist *sgl = host->data->sg;
538 const u32 mszs[] = {1, 4, 8, 16, 32, 64, 128, 256};
539 u32 sg_elems = host->data->sg_len;
540 u32 fifoth_val, mburst;
542 u32 idx, rx_wmark, tx_wmark;
545 /* Set external dma config: burst size, burst width*/
546 slave_config.dst_addr = (dma_addr_t)(host->phy_regs + host->data_offset);
547 slave_config.src_addr = slave_config.dst_addr;
548 slave_config.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
549 slave_config.src_addr_width = slave_config.dst_addr_width;
551 /* Match FIFO dma burst MSIZE with external dma config*/
552 fifoth_val = mci_readl(host, FIFOTH);
553 mburst = mszs[(fifoth_val >> 28) & 0x7];
555 /* Edmac limit burst to 16, but work around for rk3036 to 8 */
556 if (unlikely(cpu_is_rk3036()))
561 if (mburst > burst_limit) {
562 mburst = burst_limit;
563 idx = (ilog2(mburst) > 0) ? (ilog2(mburst) - 1) : 0;
565 rx_wmark = mszs[idx] - 1;
566 tx_wmark = (host->fifo_depth) / 2;
567 fifoth_val = SDMMC_SET_FIFOTH(idx, rx_wmark, tx_wmark);
569 mci_writel(host, FIFOTH, fifoth_val);
572 slave_config.dst_maxburst = mburst;
573 slave_config.src_maxburst = slave_config.dst_maxburst;
575 if(host->data->flags & MMC_DATA_WRITE){
576 slave_config.direction = DMA_MEM_TO_DEV;
577 ret = dmaengine_slave_config(host->dms->ch, &slave_config);
580 "Error in dw_mci edmac write configuration.\n");
584 desc = dmaengine_prep_slave_sg(host->dms->ch, sgl, sg_len,
585 DMA_MEM_TO_DEV, DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
588 "Cannot prepare slave write sg the dw_mci edmac!\n");
592 /* Set dw_mci_edmac_complete_dma as callback */
593 desc->callback = dw_mci_edmac_complete_dma;
594 desc->callback_param = (void *)host;
595 dmaengine_submit(desc);
597 /* Flush cache before write */
598 dma_sync_sg_for_device(mmc_dev(host->mmc), sgl,
599 sg_elems, DMA_TO_DEVICE);
600 dma_async_issue_pending(host->dms->ch);
603 slave_config.direction = DMA_DEV_TO_MEM;
604 ret = dmaengine_slave_config(host->dms->ch, &slave_config);
607 "Error in dw_mci edmac read configuration.\n");
610 desc = dmaengine_prep_slave_sg(host->dms->ch, sgl, sg_len,
611 DMA_DEV_TO_MEM, DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
614 "Cannot prepare slave read sg for the dw_mci edmac!\n");
617 /* set dw_mci_edmac_complete_dma as callback */
618 desc->callback = dw_mci_edmac_complete_dma;
619 desc->callback_param = (void *)host;
620 dmaengine_submit(desc);
621 dma_async_issue_pending(host->dms->ch);
625 static int dw_mci_edmac_init(struct dw_mci *host)
629 /* Request external dma channel, SHOULD decide chn in dts */
631 host->dms = (struct dw_mci_dma_slave *)kzalloc
632 (sizeof(struct dw_mci_dma_slave), GFP_KERNEL);
633 if (NULL == host->dms) {
634 dev_err(host->dev, "No enough memory to alloc dms.\n");
638 host->dms->ch = dma_request_slave_channel(host->dev, "dw_mci");
639 if (!host->dms->ch) {
641 "Failed to get external DMA channel %d\n",
642 host->dms->ch->chan_id);
651 static void dw_mci_edmac_exit(struct dw_mci *host)
653 if (NULL != host->dms) {
654 if (NULL != host->dms->ch) {
655 dma_release_channel(host->dms->ch);
656 host->dms->ch = NULL;
663 static const struct dw_mci_dma_ops dw_mci_edmac_ops = {
664 .init = dw_mci_edmac_init,
665 .exit = dw_mci_edmac_exit,
666 .start = dw_mci_edmac_start_dma,
667 .stop = dw_mci_edmac_stop_dma,
668 .complete = dw_mci_edmac_complete_dma,
669 .cleanup = dw_mci_edma_cleanup,
671 #endif /* CONFIG_MMC_DW_IDMAC */
673 static struct dma_attrs dw_mci_direct_attrs;
675 static int dw_mci_pre_dma_transfer(struct dw_mci *host,
676 struct mmc_data *data,
679 struct scatterlist *sg;
680 unsigned int i, sg_len;
681 #ifdef CONFIG_MMC_DW_SKIP_CACHE_OP
682 struct dma_attrs *attrs;
685 if (!next && data->host_cookie)
686 return data->host_cookie;
689 * We don't do DMA on "complex" transfers, i.e. with
690 * non-word-aligned buffers or lengths. Also, we don't bother
691 * with all the DMA setup overhead for short transfers.
693 if (data->blocks * data->blksz < DW_MCI_DMA_THRESHOLD)
699 for_each_sg(data->sg, sg, data->sg_len, i) {
700 if (sg->offset & 3 || sg->length & 3)
703 #ifdef CONFIG_MMC_DW_SKIP_CACHE_OP
704 attrs = (data->flags & MMC_DATA_DIRECT) ? &dw_mci_direct_attrs : NULL;
705 sg_len = dma_map_sg_attrs(host->dev,
708 dw_mci_get_dma_dir(data), attrs);
711 sg_len = dma_map_sg(host->dev,
714 dw_mci_get_dma_dir(data));
720 data->host_cookie = sg_len;
725 static void dw_mci_pre_req(struct mmc_host *mmc,
726 struct mmc_request *mrq,
729 struct dw_mci_slot *slot = mmc_priv(mmc);
730 struct mmc_data *data = mrq->data;
732 if (!slot->host->use_dma || !data)
735 if (data->host_cookie) {
736 data->host_cookie = 0;
740 if (dw_mci_pre_dma_transfer(slot->host, mrq->data, 1) < 0)
741 data->host_cookie = 0;
744 static void dw_mci_post_req(struct mmc_host *mmc,
745 struct mmc_request *mrq,
748 struct dw_mci_slot *slot = mmc_priv(mmc);
749 struct mmc_data *data = mrq->data;
751 if (!slot->host->use_dma || !data)
754 if (data->host_cookie)
755 dma_unmap_sg(slot->host->dev,
758 dw_mci_get_dma_dir(data));
759 data->host_cookie = 0;
762 static void dw_mci_adjust_fifoth(struct dw_mci *host, struct mmc_data *data)
764 #ifdef CONFIG_MMC_DW_IDMAC
765 unsigned int blksz = data->blksz;
766 const u32 mszs[] = {1, 4, 8, 16, 32, 64, 128, 256};
767 u32 fifo_width = 1 << host->data_shift;
768 u32 blksz_depth = blksz / fifo_width, fifoth_val;
769 u32 msize = 0, rx_wmark = 1, tx_wmark, tx_wmark_invers;
770 int idx = (sizeof(mszs) / sizeof(mszs[0])) - 1;
772 tx_wmark = (host->fifo_depth) / 2;
773 tx_wmark_invers = host->fifo_depth - tx_wmark;
777 * if blksz is not a multiple of the FIFO width
779 if (blksz % fifo_width) {
786 if (!((blksz_depth % mszs[idx]) ||
787 (tx_wmark_invers % mszs[idx]))) {
789 rx_wmark = mszs[idx] - 1;
794 * If idx is '0', it won't be tried
795 * Thus, initial values are uesed
798 fifoth_val = SDMMC_SET_FIFOTH(msize, rx_wmark, tx_wmark);
799 mci_writel(host, FIFOTH, fifoth_val);
804 static void dw_mci_ctrl_rd_thld(struct dw_mci *host, struct mmc_data *data)
806 unsigned int blksz = data->blksz;
807 u32 blksz_depth, fifo_depth;
810 WARN_ON(!(data->flags & MMC_DATA_READ));
812 if (host->timing != MMC_TIMING_MMC_HS200 &&
813 host->timing != MMC_TIMING_UHS_SDR104)
816 blksz_depth = blksz / (1 << host->data_shift);
817 fifo_depth = host->fifo_depth;
819 if (blksz_depth > fifo_depth)
823 * If (blksz_depth) >= (fifo_depth >> 1), should be 'thld_size <= blksz'
824 * If (blksz_depth) < (fifo_depth >> 1), should be thld_size = blksz
825 * Currently just choose blksz.
828 mci_writel(host, CDTHRCTL, SDMMC_SET_RD_THLD(thld_size, 1));
832 mci_writel(host, CDTHRCTL, SDMMC_SET_RD_THLD(0, 0));
835 static int dw_mci_submit_data_dma(struct dw_mci *host, struct mmc_data *data)
843 /* If we don't have a channel, we can't do DMA */
847 sg_len = dw_mci_pre_dma_transfer(host, data, 0);
849 /* Fixme: No need terminate edma, may cause flush op */
850 if(!(cpu_is_rk3036() || cpu_is_rk312x()))
851 host->dma_ops->stop(host);
858 "sd sg_cpu: %#lx sg_dma: %#lx sg_len: %d\n",
859 (unsigned long)host->sg_cpu, (unsigned long)host->sg_dma,
863 * Decide the MSIZE and RX/TX Watermark.
864 * If current block size is same with previous size,
865 * no need to update fifoth.
867 if (host->prev_blksz != data->blksz)
868 dw_mci_adjust_fifoth(host, data);
871 dw_mci_ctrl_reset(host, SDMMC_CTRL_DMA_RESET);
873 /* Enable the DMA interface */
874 temp = mci_readl(host, CTRL);
875 temp |= SDMMC_CTRL_DMA_ENABLE;
876 mci_writel(host, CTRL, temp);
878 /* Disable RX/TX IRQs, let DMA handle it */
879 spin_lock_irqsave(&host->slock, flags);
880 temp = mci_readl(host, INTMASK);
881 temp &= ~(SDMMC_INT_RXDR | SDMMC_INT_TXDR);
882 mci_writel(host, INTMASK, temp);
883 spin_unlock_irqrestore(&host->slock, flags);
885 host->dma_ops->start(host, sg_len);
890 static void dw_mci_submit_data(struct dw_mci *host, struct mmc_data *data)
895 data->error = -EINPROGRESS;
897 //WARN_ON(host->data);
902 dw_mci_ctrl_reset(host, SDMMC_CTRL_DMA_RESET);
904 if (data->flags & MMC_DATA_READ) {
905 host->dir_status = DW_MCI_RECV_STATUS;
906 dw_mci_ctrl_rd_thld(host, data);
908 host->dir_status = DW_MCI_SEND_STATUS;
911 MMC_DBG_INFO_FUNC(host->mmc,
912 "Dw_mci_submit_data, blocks = %d, blksz = %d [%s]",
913 data->blocks, data->blksz, mmc_hostname(host->mmc));
915 if (dw_mci_submit_data_dma(host, data)) {
916 int flags = SG_MITER_ATOMIC;
917 if (host->data->flags & MMC_DATA_READ)
918 flags |= SG_MITER_TO_SG;
920 flags |= SG_MITER_FROM_SG;
922 sg_miter_start(&host->sg_miter, data->sg, data->sg_len, flags);
924 host->part_buf_start = 0;
925 host->part_buf_count = 0;
927 spin_lock_irqsave(&host->slock, flag);
928 mci_writel(host, RINTSTS, SDMMC_INT_TXDR | SDMMC_INT_RXDR);
929 temp = mci_readl(host, INTMASK);
930 temp |= SDMMC_INT_TXDR | SDMMC_INT_RXDR;
931 mci_writel(host, INTMASK, temp);
932 spin_unlock_irqrestore(&host->slock, flag);
934 temp = mci_readl(host, CTRL);
935 temp &= ~SDMMC_CTRL_DMA_ENABLE;
936 mci_writel(host, CTRL, temp);
939 * Use the initial fifoth_val for PIO mode.
940 * If next issued data may be transfered by DMA mode,
941 * prev_blksz should be invalidated.
943 mci_writel(host, FIFOTH, host->fifoth_val);
944 host->prev_blksz = 0;
947 * Keep the current block size.
948 * It will be used to decide whether to update
949 * fifoth register next time.
951 host->prev_blksz = data->blksz;
955 static void mci_send_cmd(struct dw_mci_slot *slot, u32 cmd, u32 arg)
957 struct dw_mci *host = slot->host;
958 unsigned long timeout = jiffies + msecs_to_jiffies(500);
959 unsigned int cmd_status = 0;
961 #ifdef SDMMC_WAIT_FOR_UNBUSY
963 timeout = jiffies + msecs_to_jiffies(SDMMC_WAIT_FOR_UNBUSY);
965 if (test_bit(DW_MMC_CARD_PRESENT, &slot->flags)) {
967 ret = time_before(jiffies, timeout);
968 cmd_status = mci_readl(host, STATUS);
970 (SDMMC_STAUTS_DATA_BUSY |
971 SDMMC_STAUTS_MC_BUSY)))
976 MMC_DBG_ERR_FUNC(host->mmc,
977 "mci_send_cmd: wait for unbusy timeout! [%s]",
978 mmc_hostname(host->mmc));
982 mci_writel(host, CMDARG, arg);
984 mci_writel(host, CMD, SDMMC_CMD_START | cmd);
985 if(cmd & SDMMC_CMD_UPD_CLK)
986 timeout = jiffies + msecs_to_jiffies(50);
988 timeout = jiffies + msecs_to_jiffies(500);
990 while (time_before(jiffies, timeout)) {
991 cmd_status = mci_readl(host, CMD);
992 if (!(cmd_status & SDMMC_CMD_START))
996 dev_err(&slot->mmc->class_dev,
997 "Timeout sending command (cmd %#x arg %#x status %#x)\n",
998 cmd, arg, cmd_status);
1001 static void dw_mci_setup_bus(struct dw_mci_slot *slot, bool force_clkinit)
1003 struct dw_mci *host = slot->host;
1004 unsigned int tempck,clock = slot->clock;
1009 MMC_DBG_INFO_FUNC(host->mmc,
1010 "%s: clock=%d, current_speed=%d, bus_hz=%d, forc=%d[%s]\n",
1011 __FUNCTION__, clock, host->current_speed, host->bus_hz,
1012 force_clkinit, mmc_hostname(host->mmc));
1015 mci_writel(host, CLKENA, 0);
1016 #ifdef CONFIG_MMC_DW_ROCKCHIP_SWITCH_VOLTAGE
1017 if(host->svi_flags == 0)
1018 mci_send_cmd(slot, SDMMC_CMD_UPD_CLK | SDMMC_CMD_PRV_DAT_WAIT, 0);
1020 mci_send_cmd(slot, SDMMC_CMD_UPD_CLK | SDMMC_CMD_PRV_DAT_WAIT, 0);
1022 } else if (clock != host->current_speed || force_clkinit) {
1023 div = host->bus_hz / clock;
1024 if (host->bus_hz % clock && host->bus_hz > clock)
1026 * move the + 1 after the divide to prevent
1027 * over-clocking the card.
1031 div = (host->bus_hz != clock) ? DIV_ROUND_UP(div, 2) : 0;
1033 if ((clock << div) != slot->__clk_old || force_clkinit) {
1034 tempck = div ? ((host->bus_hz / div) >> 1) :host->bus_hz;
1035 dev_info(&slot->mmc->class_dev,
1036 "Bus speed (slot %d) = %dHz (slot req %dHz, actual %dHZ div = %d)\n",
1037 slot->id, host->bus_hz, clock,
1040 host->set_speed = tempck;
1041 host->set_div = div;
1045 mci_writel(host, CLKENA, 0);
1046 mci_writel(host, CLKSRC, 0);
1050 SDMMC_CMD_UPD_CLK | SDMMC_CMD_PRV_DAT_WAIT, 0);
1052 if(clock <= 400*1000){
1053 MMC_DBG_BOOT_FUNC(host->mmc,
1054 "dw_mci_setup_bus: argue clk_mmc workaround out %dHz for init[%s]",
1055 clock * 2, mmc_hostname(host->mmc));
1056 /* clk_mmc will change parents to 24MHz xtal*/
1057 clk_set_rate(host->clk_mmc, clock * 2);
1060 host->set_div = div;
1064 MMC_DBG_BOOT_FUNC(host->mmc,
1065 "dw_mci_setup_bus: argue clk_mmc workaround out normal clock [%s]",
1066 mmc_hostname(host->mmc));
1069 MMC_DBG_ERR_FUNC(host->mmc,
1070 "dw_mci_setup_bus: div SHOULD NOT LARGER THAN ONE! [%s]",
1071 mmc_hostname(host->mmc));
1073 host->set_div = div;
1074 host->bus_hz = host->set_speed * 2;
1075 MMC_DBG_BOOT_FUNC(host->mmc,
1076 "dw_mci_setup_bus: workaround div = %d, host->bus_hz = %d [%s]",
1077 div, host->bus_hz, mmc_hostname(host->mmc));
1079 /* BUG may be here, come on, Linux BSP engineer looks!
1080 FIXME: HS-DDR eMMC, div SHOULD be ONE, but we here cannot fetch eMMC bus mode!!!!!!!!
1081 WRONG dts set clk = 50M, and calc div be zero. Controller denied this setting!
1082 some oops happened like that:
1083 mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0)
1084 rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out normal clock [mmc0]
1085 rk_sdmmc: BOOT Bus speed=50000000Hz,Bus width=8bits.[mmc0]
1086 mmc0: new high speed DDR MMC card at address 0001
1087 mmcblk0: mmc0:0001 M8G1GC 7.28 GiB
1089 mmcblk0: error -84 transferring data, sector 606208, nr 32, cmd response 0x900, card status 0xb00
1090 mmcblk0: retrying using single block read
1091 mmcblk0: error -110 sending status command, retrying
1093 We assume all eMMC in RK platform with 3.10 kernel, at least version 4.5
1096 (host->mmc->caps & (MMC_CAP_1_8V_DDR | MMC_CAP_1_2V_DDR)) &&
1097 !(host->mmc->caps2 & MMC_CAP2_HS200)) {
1100 host->set_div = div;
1101 host->bus_hz = host->set_speed * 2;
1102 MMC_DBG_BOOT_FUNC(host->mmc,
1103 "dw_mci_setup_bus: workaround div = %d, host->bus_hz = %d [%s]",
1104 div, host->bus_hz, mmc_hostname(host->mmc));
1107 if (host->verid < DW_MMC_240A)
1108 clk_set_rate(host->clk_mmc,(host->bus_hz));
1110 clk_set_rate(host->clk_mmc,(host->bus_hz) * 2);
1116 /* set clock to desired speed */
1117 mci_writel(host, CLKDIV, div);
1121 SDMMC_CMD_UPD_CLK | SDMMC_CMD_PRV_DAT_WAIT, 0);
1123 /* enable clock; only low power if no SDIO */
1124 clk_en_a = SDMMC_CLKEN_ENABLE << slot->id;
1126 if (host->verid < DW_MMC_240A)
1127 sdio_int = SDMMC_INT_SDIO(slot->id);
1129 sdio_int = SDMMC_INT_SDIO((slot->id) + 8);
1131 if (!(mci_readl(host, INTMASK) & sdio_int))
1132 clk_en_a |= SDMMC_CLKEN_LOW_PWR << slot->id;
1133 mci_writel(host, CLKENA, clk_en_a);
1137 SDMMC_CMD_UPD_CLK | SDMMC_CMD_PRV_DAT_WAIT, 0);
1138 /* keep the clock with reflecting clock dividor */
1139 slot->__clk_old = clock << div;
1142 host->current_speed = clock;
1144 if(slot->ctype != slot->pre_ctype)
1145 MMC_DBG_BOOT_FUNC(host->mmc,
1146 "Bus speed=%dHz,Bus width=%s.[%s]",
1148 (slot->ctype == SDMMC_CTYPE_4BIT) ? "4bits" : "8bits",
1149 mmc_hostname(host->mmc));
1151 slot->pre_ctype = slot->ctype;
1153 /* Set the current slot bus width */
1154 mci_writel(host, CTYPE, (slot->ctype << slot->id));
1157 extern struct mmc_card *this_card;
1158 static void dw_mci_wait_unbusy(struct dw_mci *host)
1160 unsigned int timeout = SDMMC_DATA_TIMEOUT_SDIO;
1161 unsigned long time_loop;
1162 unsigned int status;
1163 unsigned int tmo = 300000;
1164 /* Secure erase flag */
1167 MMC_DBG_INFO_FUNC(host->mmc,
1168 "dw_mci_wait_unbusy, status=0x%x ", mci_readl(host, STATUS));
1170 if (host->mmc->restrict_caps & RESTRICT_CARD_TYPE_EMMC) {
1171 if (host->cmd && (host->cmd->opcode == MMC_ERASE) && this_card) {
1172 /* Special care for (secure)erase timeout calculation */
1173 if ((host->cmd->arg & (0x1 << 31)) == 1)
1176 if (((this_card->ext_csd.erase_group_def) & 0x1) == 1)
1178 (timeout = (this_card->ext_csd.hc_erase_timeout) *
1179 tmo * (this_card->ext_csd.sec_erase_mult)) :
1180 (timeout = (this_card->ext_csd.hc_erase_timeout) * tmo);
1183 if(timeout < SDMMC_DATA_TIMEOUT_EMMC)
1184 timeout = SDMMC_DATA_TIMEOUT_EMMC;
1185 } else if (host->mmc->restrict_caps & RESTRICT_CARD_TYPE_SD) {
1186 timeout = SDMMC_DATA_TIMEOUT_SD;
1189 time_loop = jiffies + msecs_to_jiffies(timeout);
1191 status = mci_readl(host, STATUS);
1192 if (!(status & (SDMMC_STAUTS_DATA_BUSY | SDMMC_STAUTS_MC_BUSY)))
1194 } while (time_before(jiffies, time_loop));
1197 #ifdef CONFIG_MMC_DW_ROCKCHIP_SWITCH_VOLTAGE
1200 * 0--status is busy.
1201 * 1--status is unbusy.
1203 int dw_mci_card_busy(struct mmc_host *mmc)
1205 struct dw_mci_slot *slot = mmc_priv(mmc);
1206 struct dw_mci *host = slot->host;
1208 MMC_DBG_INFO_FUNC(host->mmc, "dw_mci_card_busy: svi_flags = %d [%s]", \
1209 host->svi_flags, mmc_hostname(host->mmc));
1212 if(host->svi_flags == 0){
1214 host->svi_flags = 1;
1215 return host->svi_flags;
1218 host->svi_flags = 0;
1219 return host->svi_flags;
1225 static void __dw_mci_start_request(struct dw_mci *host,
1226 struct dw_mci_slot *slot,
1227 struct mmc_command *cmd)
1229 struct mmc_request *mrq;
1230 struct mmc_data *data;
1234 if (host->pdata->select_slot)
1235 host->pdata->select_slot(slot->id);
1237 host->cur_slot = slot;
1240 dw_mci_wait_unbusy(host);
1242 host->pending_events = 0;
1243 host->completed_events = 0;
1244 host->data_status = 0;
1245 host->cmd_status = 0;
1249 dw_mci_set_timeout(host);
1250 mci_writel(host, BYTCNT, data->blksz*data->blocks);
1251 mci_writel(host, BLKSIZ, data->blksz);
1254 cmdflags = dw_mci_prepare_command(slot->mmc, cmd);
1256 /* this is the first command, send the initialization clock */
1257 if (test_and_clear_bit(DW_MMC_CARD_NEED_INIT, &slot->flags))
1258 cmdflags |= SDMMC_CMD_INIT;
1261 dw_mci_submit_data(host, data);
1265 dw_mci_start_command(host, cmd, cmdflags);
1268 host->stop_cmdr = dw_mci_prepare_command(slot->mmc, mrq->stop);
1271 static void dw_mci_start_request(struct dw_mci *host,
1272 struct dw_mci_slot *slot)
1274 struct mmc_request *mrq = slot->mrq;
1275 struct mmc_command *cmd;
1277 MMC_DBG_INFO_FUNC(host->mmc,
1278 " Begin to start the new request. cmd=%d(arg=0x%x)[%s]",
1279 mrq->cmd->opcode, mrq->cmd->arg, mmc_hostname(host->mmc));
1281 cmd = mrq->sbc ? mrq->sbc : mrq->cmd;
1282 __dw_mci_start_request(host, slot, cmd);
1285 /* must be called with host->lock held */
1286 static void dw_mci_queue_request(struct dw_mci *host, struct dw_mci_slot *slot,
1287 struct mmc_request *mrq)
1289 dev_vdbg(&slot->mmc->class_dev, "queue request: state=%d\n",
1294 if (host->state == STATE_IDLE) {
1295 host->state = STATE_SENDING_CMD;
1296 dw_mci_start_request(host, slot);
1298 list_add_tail(&slot->queue_node, &host->queue);
1302 static void dw_mci_request(struct mmc_host *mmc, struct mmc_request *mrq)
1304 struct dw_mci_slot *slot = mmc_priv(mmc);
1305 struct dw_mci *host = slot->host;
1310 * The check for card presence and queueing of the request must be
1311 * atomic, otherwise the card could be removed in between and the
1312 * request wouldn't fail until another card was inserted.
1314 spin_lock_bh(&host->lock);
1316 if (!test_bit(DW_MMC_CARD_PRESENT, &slot->flags)) {
1317 spin_unlock_bh(&host->lock);
1318 mrq->cmd->error = -ENOMEDIUM;
1319 MMC_DBG_CMD_FUNC(host->mmc, "%s: no card,so reqeuest done, cmd=%d [%s]",
1320 __FUNCTION__, mrq->cmd->opcode, mmc_hostname(host->mmc));
1322 mmc_request_done(mmc, mrq);
1326 MMC_DBG_CMD_FUNC(host->mmc,
1327 "======>\n pull a new request from MMC-frame to dw_mci_queue. cmd=%d(arg=0x%x)[%s]",
1328 mrq->cmd->opcode, mrq->cmd->arg, mmc_hostname(host->mmc));
1330 dw_mci_queue_request(host, slot, mrq);
1332 spin_unlock_bh(&host->lock);
1335 static void dw_mci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
1337 struct dw_mci_slot *slot = mmc_priv(mmc);
1338 #ifdef CONFIG_MMC_DW_ROCKCHIP_SWITCH_VOLTAGE
1339 struct dw_mci *host = slot->host;
1341 const struct dw_mci_drv_data *drv_data = slot->host->drv_data;
1344 #ifdef SDMMC_WAIT_FOR_UNBUSY
1345 unsigned long time_loop;
1348 #ifdef CONFIG_MMC_DW_ROCKCHIP_SWITCH_VOLTAGE
1349 if(host->svi_flags == 1)
1350 time_loop = jiffies + msecs_to_jiffies(SDMMC_DATA_TIMEOUT_SD);
1352 time_loop = jiffies + msecs_to_jiffies(SDMMC_WAIT_FOR_UNBUSY);
1354 time_loop = jiffies + msecs_to_jiffies(SDMMC_WAIT_FOR_UNBUSY);
1357 if(!test_bit(DW_MMC_CARD_PRESENT, &slot->flags)){
1358 printk("%d..%s: no card. [%s]\n", \
1359 __LINE__, __FUNCTION__, mmc_hostname(mmc));
1364 ret = time_before(jiffies, time_loop);
1365 regs = mci_readl(slot->host, STATUS);
1366 if (!(regs & (SDMMC_STAUTS_DATA_BUSY |
1367 SDMMC_STAUTS_MC_BUSY)))
1373 printk("slot->flags = %lu ", slot->flags);
1374 #ifdef CONFIG_MMC_DW_ROCKCHIP_SWITCH_VOLTAGE
1375 if(host->svi_flags != 1)
1378 printk("%s: wait for unbusy timeout....... STATUS = 0x%x [%s]\n",
1379 __FUNCTION__, regs, mmc_hostname(mmc));
1383 switch (ios->bus_width) {
1384 case MMC_BUS_WIDTH_4:
1385 slot->ctype = SDMMC_CTYPE_4BIT;
1387 case MMC_BUS_WIDTH_8:
1388 slot->ctype = SDMMC_CTYPE_8BIT;
1391 /* set default 1 bit mode */
1392 slot->ctype = SDMMC_CTYPE_1BIT;
1393 slot->pre_ctype = SDMMC_CTYPE_1BIT;
1396 regs = mci_readl(slot->host, UHS_REG);
1399 if (ios->timing == MMC_TIMING_UHS_DDR50)
1400 regs |= ((0x1 << slot->id) << 16);
1402 regs &= ~((0x1 << slot->id) << 16);
1404 mci_writel(slot->host, UHS_REG, regs);
1405 slot->host->timing = ios->timing;
1408 * Use mirror of ios->clock to prevent race with mmc
1409 * core ios update when finding the minimum.
1411 slot->clock = ios->clock;
1413 if (drv_data && drv_data->set_ios)
1414 drv_data->set_ios(slot->host, ios);
1416 /* Slot specific timing and width adjustment */
1417 dw_mci_setup_bus(slot, false);
1421 switch (ios->power_mode) {
1424 set_bit(DW_MMC_CARD_NEED_INIT, &slot->flags);
1425 if (slot->host->pdata->setpower)
1426 slot->host->pdata->setpower(slot->id, mmc->ocr_avail);
1427 regs = mci_readl(slot->host, PWREN);
1428 regs |= (1 << slot->id);
1429 mci_writel(slot->host, PWREN, regs);
1432 /* Power down slot */
1433 if(slot->host->pdata->setpower)
1434 slot->host->pdata->setpower(slot->id, 0);
1435 regs = mci_readl(slot->host, PWREN);
1436 regs &= ~(1 << slot->id);
1437 mci_writel(slot->host, PWREN, regs);
1444 static int dw_mci_get_ro(struct mmc_host *mmc)
1447 struct dw_mci_slot *slot = mmc_priv(mmc);
1448 struct dw_mci_board *brd = slot->host->pdata;
1450 /* Use platform get_ro function, else try on board write protect */
1451 if(slot->quirks & DW_MCI_SLOT_QUIRK_NO_WRITE_PROTECT)
1453 else if(brd->get_ro)
1454 read_only = brd->get_ro(slot->id);
1455 else if(gpio_is_valid(slot->wp_gpio))
1456 read_only = gpio_get_value(slot->wp_gpio);
1459 mci_readl(slot->host, WRTPRT) & (1 << slot->id) ? 1 : 0;
1461 dev_dbg(&mmc->class_dev, "card is %s\n",
1462 read_only ? "read-only" : "read-write");
1467 static int dw_mci_set_sdio_status(struct mmc_host *mmc, int val)
1469 struct dw_mci_slot *slot = mmc_priv(mmc);
1470 struct dw_mci *host = slot->host;
1472 if (!(mmc->restrict_caps & RESTRICT_CARD_TYPE_SDIO))
1475 spin_lock_bh(&host->lock);
1478 set_bit(DW_MMC_CARD_PRESENT, &slot->flags);
1480 clear_bit(DW_MMC_CARD_PRESENT, &slot->flags);
1482 spin_unlock_bh(&host->lock);
1484 if (test_bit(DW_MMC_CARD_PRESENT, &slot->flags)) {
1485 if (__clk_is_enabled(host->hclk_mmc) == false)
1486 clk_prepare_enable(host->hclk_mmc);
1487 if (__clk_is_enabled(host->clk_mmc) == false)
1488 clk_prepare_enable(host->clk_mmc);
1490 if (__clk_is_enabled(host->clk_mmc) == true)
1491 clk_disable_unprepare(slot->host->clk_mmc);
1492 if (__clk_is_enabled(host->hclk_mmc) == true)
1493 clk_disable_unprepare(slot->host->hclk_mmc);
1496 mmc_detect_change(slot->mmc, 20);
1502 static int dw_mci_get_cd(struct mmc_host *mmc)
1505 struct dw_mci_slot *slot = mmc_priv(mmc);
1506 struct dw_mci_board *brd = slot->host->pdata;
1507 struct dw_mci *host = slot->host;
1508 int gpio_cd = mmc_gpio_get_cd(mmc);
1509 int force_jtag_bit, force_jtag_reg;
1513 if ((soc_is_rk3126() || soc_is_rk3126b() || soc_is_rk3036()) &&
1514 (mmc->restrict_caps & RESTRICT_CARD_TYPE_SD)) {
1515 gpio_cd = slot->cd_gpio;
1516 irq = gpio_to_irq(gpio_cd);
1517 if (gpio_is_valid(gpio_cd)) {
1518 gpio_val = gpio_get_value(gpio_cd);
1519 if (soc_is_rk3036()) {
1520 force_jtag_bit = 11;
1521 force_jtag_reg = RK312X_GRF_SOC_CON0;
1522 } else if (soc_is_rk3126() || soc_is_rk3126b()) {
1523 force_jtag_reg = RK312X_GRF_SOC_CON0;
1527 if (gpio_val == gpio_get_value(gpio_cd)) {
1528 gpio_cd = (gpio_val == 0 ? 1 : 0);
1530 irq_set_irq_type(irq, IRQF_TRIGGER_LOW | IRQF_ONESHOT);
1531 /* Enable force_jtag wihtout card in slot, ONLY for NCD-package */
1532 grf_writel((0x1 << (force_jtag_bit + 16)) | (1 << force_jtag_bit),
1534 dw_mci_ctrl_all_reset(host);
1536 irq_set_irq_type(irq, IRQF_TRIGGER_HIGH | IRQF_ONESHOT);
1537 /* Really card detected: SHOULD disable force_jtag */
1538 grf_writel((0x1 << (force_jtag_bit + 16)) | (0 << force_jtag_bit),
1543 gpio_val = gpio_get_value(gpio_cd);
1545 irq_set_irq_type(irq, IRQF_TRIGGER_HIGH | IRQF_ONESHOT) :
1546 irq_set_irq_type(irq, IRQF_TRIGGER_LOW | IRQF_ONESHOT);
1547 return slot->last_detect_state;
1550 dev_err(host->dev, "dw_mci_get_cd: invalid gpio_cd!\n");
1554 if (mmc->restrict_caps & RESTRICT_CARD_TYPE_SDIO)
1555 return test_bit(DW_MMC_CARD_PRESENT, &slot->flags);
1557 /* Use platform get_cd function, else try onboard card detect */
1558 if (brd->quirks & DW_MCI_QUIRK_BROKEN_CARD_DETECTION)
1560 else if (brd->get_cd)
1561 present = !brd->get_cd(slot->id);
1562 else if (!IS_ERR_VALUE(gpio_cd))
1565 present = ((mci_readl(slot->host, CDETECT) & (1 << slot->id))
1568 spin_lock_bh(&host->lock);
1570 set_bit(DW_MMC_CARD_PRESENT, &slot->flags);
1571 dev_dbg(&mmc->class_dev, "card is present\n");
1573 clear_bit(DW_MMC_CARD_PRESENT, &slot->flags);
1574 dev_dbg(&mmc->class_dev, "card is not present\n");
1576 spin_unlock_bh(&host->lock);
1583 * Dts Should caps emmc controller with poll-hw-reset
1585 static void dw_mci_hw_reset(struct mmc_host *mmc)
1587 struct dw_mci_slot *slot = mmc_priv(mmc);
1588 struct dw_mci *host = slot->host;
1593 unsigned long timeout;
1596 /* (1) CMD12 to end any transfer in process */
1597 cmd_flags = SDMMC_CMD_STOP | SDMMC_CMD_RESP_CRC
1598 | SDMMC_CMD_RESP_EXP | MMC_STOP_TRANSMISSION;
1600 if(host->mmc->hold_reg_flag)
1601 cmd_flags |= SDMMC_CMD_USE_HOLD_REG;
1602 mci_writel(host, CMDARG, 0);
1604 mci_writel(host, CMD, cmd_flags | SDMMC_CMD_START);
1606 timeout = jiffies + msecs_to_jiffies(500);
1608 ret = time_before(jiffies, timeout);
1609 if(!(mci_readl(host, CMD) & SDMMC_CMD_START))
1614 MMC_DBG_ERR_FUNC(host->mmc,
1615 "%s dw_mci_hw_reset: STOP_TRANSMISSION failed!!! [%s]\n",
1616 __func__, mmc_hostname(host->mmc));
1618 /* (2) wait DTO, even if no response is sent back by card */
1620 timeout = jiffies + msecs_to_jiffies(5);
1622 ret = time_before(jiffies, timeout);
1623 if(!(mci_readl(host, MINTSTS) & SDMMC_INT_DATA_OVER)){
1624 mci_writel(host, RINTSTS, SDMMC_INT_DATA_OVER);
1630 /* (3) Reset following: DONNOT CHANGE RESET ORDER!*/
1632 /* Software reset - BMOD[0] for IDMA only */
1633 regs = mci_readl(host, BMOD);
1634 regs |= SDMMC_IDMAC_SWRESET;
1635 mci_writel(host, BMOD, regs);
1636 udelay(1); /* Auto cleared after 1 cycle, 1us is enough for hclk_mmc */
1637 regs = mci_readl(host, BMOD);
1638 if(regs & SDMMC_IDMAC_SWRESET)
1639 MMC_DBG_WARN_FUNC(host->mmc,
1640 "%s dw_mci_hw_reset: SDMMC_IDMAC_SWRESET failed!!! [%s]\n",
1641 __func__, mmc_hostname(host->mmc));
1643 /* DMA reset - CTRL[2] */
1644 regs = mci_readl(host, CTRL);
1645 regs |= SDMMC_CTRL_DMA_RESET;
1646 mci_writel(host, CTRL, regs);
1647 udelay(1); /* Auto cleared after 2 AHB clocks, 1us is enough plus mci_readl access */
1648 regs = mci_readl(host, CTRL);
1649 if(regs & SDMMC_CTRL_DMA_RESET)
1650 MMC_DBG_WARN_FUNC(host->mmc,
1651 "%s dw_mci_hw_reset: SDMMC_CTRL_DMA_RESET failed!!! [%s]\n",
1652 __func__, mmc_hostname(host->mmc));
1654 /* FIFO reset - CTRL[1] */
1655 regs = mci_readl(host, CTRL);
1656 regs |= SDMMC_CTRL_FIFO_RESET;
1657 mci_writel(host, CTRL, regs);
1658 mdelay(1); /* no timing limited, 1ms is random value */
1659 regs = mci_readl(host, CTRL);
1660 if(regs & SDMMC_CTRL_FIFO_RESET)
1661 MMC_DBG_WARN_FUNC(host->mmc,
1662 "%s dw_mci_hw_reset: SDMMC_CTRL_DMA_RESET failed!!! [%s]\n",
1663 __func__, mmc_hostname(host->mmc));
1666 According to eMMC spec
1667 tRstW >= 1us ; RST_n pulse width
1668 tRSCA >= 200us ; RST_n to Command time
1669 tRSTH >= 1us ; RST_n high period
1671 mci_writel(slot->host, PWREN, 0x0);
1672 mci_writel(slot->host, RST_N, 0x0);
1674 udelay(10); /* 10us for bad quality eMMc. */
1676 mci_writel(slot->host, PWREN, 0x1);
1677 mci_writel(slot->host, RST_N, 0x1);
1679 usleep_range(500, 1000); /* at least 500(> 200us) */
1683 * Disable lower power mode.
1685 * Low power mode will stop the card clock when idle. According to the
1686 * description of the CLKENA register we should disable low power mode
1687 * for SDIO cards if we need SDIO interrupts to work.
1689 * This function is fast if low power mode is already disabled.
1691 static void dw_mci_disable_low_power(struct dw_mci_slot *slot)
1693 struct dw_mci *host = slot->host;
1695 const u32 clken_low_pwr = SDMMC_CLKEN_LOW_PWR << slot->id;
1697 clk_en_a = mci_readl(host, CLKENA);
1699 if (clk_en_a & clken_low_pwr) {
1700 mci_writel(host, CLKENA, clk_en_a & ~clken_low_pwr);
1701 mci_send_cmd(slot, SDMMC_CMD_UPD_CLK |
1702 SDMMC_CMD_PRV_DAT_WAIT, 0);
1706 static void dw_mci_enable_sdio_irq(struct mmc_host *mmc, int enb)
1708 struct dw_mci_slot *slot = mmc_priv(mmc);
1709 struct dw_mci *host = slot->host;
1710 unsigned long flags;
1714 spin_lock_irqsave(&host->slock, flags);
1716 /* Enable/disable Slot Specific SDIO interrupt */
1717 int_mask = mci_readl(host, INTMASK);
1719 if (host->verid < DW_MMC_240A)
1720 sdio_int = SDMMC_INT_SDIO(slot->id);
1722 sdio_int = SDMMC_INT_SDIO((slot->id) + 8);
1726 * Turn off low power mode if it was enabled. This is a bit of
1727 * a heavy operation and we disable / enable IRQs a lot, so
1728 * we'll leave low power mode disabled and it will get
1729 * re-enabled again in dw_mci_setup_bus().
1731 dw_mci_disable_low_power(slot);
1733 mci_writel(host, INTMASK,
1734 (int_mask | sdio_int));
1736 mci_writel(host, INTMASK,
1737 (int_mask & ~sdio_int));
1740 spin_unlock_irqrestore(&host->slock, flags);
1743 #ifdef CONFIG_MMC_DW_ROCKCHIP_SWITCH_VOLTAGE
1745 IO_DOMAIN_12 = 1200,
1746 IO_DOMAIN_18 = 1800,
1747 IO_DOMAIN_33 = 3300,
1749 static void dw_mci_do_grf_io_domain_switch(struct dw_mci *host, u32 voltage)
1759 MMC_DBG_ERR_FUNC(host->mmc,
1760 "%s : Not support io domain voltage [%s]\n",
1761 __FUNCTION__, mmc_hostname(host->mmc));
1764 MMC_DBG_ERR_FUNC(host->mmc,
1765 "%s : Err io domain voltage [%s]\n",
1766 __FUNCTION__, mmc_hostname(host->mmc));
1770 if (cpu_is_rk3288()) {
1771 if(host->mmc->restrict_caps & RESTRICT_CARD_TYPE_SD)
1772 grf_writel((voltage << 7) | (1 << 23), RK3288_GRF_IO_VSEL);
1775 } else if (host->cid == DW_MCI_TYPE_RK3368) {
1776 if(host->mmc->restrict_caps & RESTRICT_CARD_TYPE_SD)
1777 regmap_write(host->grf, 0x900, (voltage << 6) | (1 << 22));
1781 MMC_DBG_ERR_FUNC(host->mmc,
1782 "%s : unknown chip [%s]\n",
1783 __FUNCTION__, mmc_hostname(host->mmc));
1787 static int dw_mci_do_start_signal_voltage_switch(struct dw_mci *host,
1788 struct mmc_ios *ios)
1791 unsigned int value,uhs_reg;
1794 * Signal Voltage Switching is only applicable for Host Controllers
1797 if (host->verid < DW_MMC_240A)
1800 uhs_reg = mci_readl(host, UHS_REG);
1801 MMC_DBG_SW_VOL_FUNC(host->mmc, "%s: vol=%d.[%s]\n",
1802 __FUNCTION__, ios->signal_voltage, mmc_hostname(host->mmc));
1804 switch (ios->signal_voltage) {
1805 case MMC_SIGNAL_VOLTAGE_330:
1806 /* Set 1.8V Signal Enable in the Host Control2 register to 0 */
1808 if (cpu_is_rk3288())
1809 ret = io_domain_regulator_set_voltage(
1810 host->vmmc, 3300000, 3300000);
1812 ret = regulator_set_voltage(host->vmmc,
1815 /* regulator_put(host->vmmc); */
1816 MMC_DBG_SW_VOL_FUNC(host->mmc,"%s =%dmV set 3.3 end, ret = %d\n",
1817 __func__, regulator_get_voltage(host->vmmc), ret);
1819 MMC_DBG_SW_VOL_FUNC(host->mmc,
1820 "%s: Switching to 3.3V signalling voltage "
1821 " failed\n", mmc_hostname(host->mmc));
1824 dw_mci_do_grf_io_domain_switch(host, IO_DOMAIN_33);
1827 MMC_DBG_SW_VOL_FUNC(host->mmc, "%s: [%s]\n",
1828 __FUNCTION__, mmc_hostname(host->mmc));
1830 /* set High-power mode */
1831 value = mci_readl(host, CLKENA);
1832 value &= ~SDMMC_CLKEN_LOW_PWR;
1833 mci_writel(host,CLKENA , value);
1835 uhs_reg &= ~SDMMC_UHS_VOLT_REG_18;
1836 mci_writel(host,UHS_REG , uhs_reg);
1839 usleep_range(5000, 5500);
1841 /* 3.3V regulator output should be stable within 5 ms */
1842 uhs_reg = mci_readl(host, UHS_REG);
1843 if( !(uhs_reg & SDMMC_UHS_VOLT_REG_18))
1846 MMC_DBG_SW_VOL_FUNC(host->mmc,
1847 "%s: 3.3V regulator output did not became stable\n",
1848 mmc_hostname(host->mmc));
1851 case MMC_SIGNAL_VOLTAGE_180:
1853 if (cpu_is_rk3288())
1854 ret = io_domain_regulator_set_voltage(
1855 host->vmmc, 1800000, 1800000);
1857 ret = regulator_set_voltage(
1858 host->vmmc, 1800000, 1800000);
1859 /* regulator_put(host->vmmc); */
1860 MMC_DBG_SW_VOL_FUNC(host->mmc,
1861 "%s =%dmV set 1.8end, ret=%d . \n",
1862 __func__, regulator_get_voltage(host->vmmc), ret);
1864 MMC_DBG_SW_VOL_FUNC(host->mmc,
1865 "%s: Switching to 1.8V signalling voltage "
1866 " failed\n", mmc_hostname(host->mmc));
1869 dw_mci_do_grf_io_domain_switch(host, IO_DOMAIN_18);
1873 * Enable 1.8V Signal Enable in the Host Control2
1876 mci_writel(host,UHS_REG , uhs_reg | SDMMC_UHS_VOLT_REG_18);
1879 usleep_range(5000, 5500);
1880 MMC_DBG_SW_VOL_FUNC(host->mmc, "%d..%s: .[%s]\n",__LINE__,
1881 __FUNCTION__, mmc_hostname(host->mmc));
1883 /* 1.8V regulator output should be stable within 5 ms */
1884 uhs_reg = mci_readl(host, UHS_REG);
1885 if (uhs_reg & SDMMC_UHS_VOLT_REG_18)
1888 MMC_DBG_SW_VOL_FUNC(host->mmc,
1889 "%s: 1.8V regulator output did not became stable\n",
1890 mmc_hostname(host->mmc));
1893 case MMC_SIGNAL_VOLTAGE_120:
1895 if (cpu_is_rk3288())
1896 ret = io_domain_regulator_set_voltage(
1897 host->vmmc, 1200000, 1200000);
1899 ret = regulator_set_voltage(host->vmmc,
1902 MMC_DBG_SW_VOL_FUNC(host->mmc,
1903 "%s: Switching to 1.2V signalling voltage "
1904 " failed\n", mmc_hostname(host->mmc));
1910 /* No signal voltage switch required */
1916 static int dw_mci_start_signal_voltage_switch(struct mmc_host *mmc,
1917 struct mmc_ios *ios)
1919 struct dw_mci_slot *slot = mmc_priv(mmc);
1920 struct dw_mci *host = slot->host;
1923 if (host->verid < DW_MMC_240A)
1926 err = dw_mci_do_start_signal_voltage_switch(host, ios);
1932 static int dw_mci_execute_tuning(struct mmc_host *mmc, u32 opcode)
1934 struct dw_mci_slot *slot = mmc_priv(mmc);
1935 struct dw_mci *host = slot->host;
1936 const struct dw_mci_drv_data *drv_data = host->drv_data;
1937 struct dw_mci_tuning_data tuning_data;
1940 /* Fixme: 3036/3126 doesn't support 1.8 io domain, no sense exe tuning */
1941 if(cpu_is_rk3036() || cpu_is_rk312x())
1944 if (opcode == MMC_SEND_TUNING_BLOCK_HS200) {
1945 if (mmc->ios.bus_width == MMC_BUS_WIDTH_8) {
1946 tuning_data.blk_pattern = tuning_blk_pattern_8bit;
1947 tuning_data.blksz = sizeof(tuning_blk_pattern_8bit);
1948 } else if (mmc->ios.bus_width == MMC_BUS_WIDTH_4) {
1949 tuning_data.blk_pattern = tuning_blk_pattern_4bit;
1950 tuning_data.blksz = sizeof(tuning_blk_pattern_4bit);
1954 } else if (opcode == MMC_SEND_TUNING_BLOCK) {
1955 tuning_data.blk_pattern = tuning_blk_pattern_4bit;
1956 tuning_data.blksz = sizeof(tuning_blk_pattern_4bit);
1959 "Undefined command(%d) for tuning\n", opcode);
1963 if (drv_data && drv_data->execute_tuning)
1964 err = drv_data->execute_tuning(slot, opcode, &tuning_data);
1969 static void dw_mci_post_tmo(struct mmc_host *mmc)
1971 struct dw_mci_slot *slot = mmc_priv(mmc);
1972 struct dw_mci *host = slot->host;
1973 u32 i, regs, cmd_flags;
1975 unsigned long timeout = 0;
1976 bool ret_timeout = true, is_retry = false;
1979 if (host->cur_slot->mrq->data)
1980 dw_mci_stop_dma(host);
1982 offset = host->cru_reset_offset;
1983 opcode = host->mrq->cmd->opcode;
1984 host->cur_slot->mrq = NULL;
1986 host->state = STATE_IDLE;
1989 if ((opcode == MMC_SEND_TUNING_BLOCK_HS200) ||
1990 (opcode == MMC_SEND_TUNING_BLOCK))
1993 printk("[%s] -- Timeout recovery procedure start --\n",
1994 mmc_hostname(host->mmc));
1997 mci_writel(host, INTMASK, 0x0);
2001 mci_writel(host, CMDARG, 0);
2003 cmd_flags = SDMMC_CMD_STOP | SDMMC_CMD_RESP_CRC |
2004 SDMMC_CMD_RESP_EXP | MMC_STOP_TRANSMISSION;
2006 if (host->mmc->hold_reg_flag)
2007 cmd_flags |= SDMMC_CMD_USE_HOLD_REG;
2009 mci_writel(host, CMD, cmd_flags | SDMMC_CMD_START);
2011 timeout = jiffies + msecs_to_jiffies(10);
2013 while(ret_timeout) {
2014 ret_timeout = time_before(jiffies, timeout);
2015 if(!(mci_readl(host, CMD) & SDMMC_CMD_START))
2019 if (false == ret_timeout) {
2020 MMC_DBG_ERR_FUNC(host->mmc, "stop recovery failed![%s]",
2021 mmc_hostname(host->mmc));
2022 if (host->cid == DW_MCI_TYPE_RK3368) {
2023 /* pd_peri mmc AHB bus software reset request */
2024 regmap_write(host->cru, host->cru_regsbase,
2025 (0x1<<offset)<<16 | (0x1 << offset));
2027 regmap_write(host->cru, host->cru_regsbase,
2028 (0x1<<offset)<<16 | (0x0 << offset));
2030 /* pd_peri mmc AHB bus software reset request */
2031 cru_writel(((0x1<<offset)<<16) | (0x1 << offset),
2032 host->cru_regsbase);
2034 cru_writel(((0x1<<offset)<<16) | (0x0 << offset),
2035 host->cru_regsbase);
2038 if (!dw_mci_ctrl_all_reset(host))
2040 if (is_retry == true)
2044 #ifdef CONFIG_MMC_DW_IDMAC
2045 if (!(cpu_is_rk3036() || cpu_is_rk312x()))
2046 if (host->use_dma && host->dma_ops->init)
2047 host->dma_ops->init(host);
2051 * Restore the initial value at FIFOTH register
2052 * And Invalidate the prev_blksz with zero
2054 mci_writel(host, FIFOTH, host->fifoth_val);
2055 host->prev_blksz = 0;
2056 mci_writel(host, TMOUT, 0xFFFFFFFF);
2057 mci_writel(host, RINTSTS, 0xFFFFFFFF);
2058 regs = SDMMC_INT_CMD_DONE | SDMMC_INT_DATA_OVER |
2059 SDMMC_INT_TXDR | SDMMC_INT_RXDR | SDMMC_INT_VSI |
2061 if (!(host->mmc->restrict_caps & RESTRICT_CARD_TYPE_SDIO))
2062 regs |= SDMMC_INT_CD;
2064 if ((host->mmc->restrict_caps & RESTRICT_CARD_TYPE_SDIO)) {
2065 if (host->verid < DW_MMC_240A)
2066 sdio_int = SDMMC_INT_SDIO(0);
2068 sdio_int = SDMMC_INT_SDIO(8);
2070 if (mci_readl(host, INTMASK) & sdio_int)
2074 mci_writel(host, INTMASK, regs);
2075 mci_writel(host, CTRL, SDMMC_CTRL_INT_ENABLE);
2076 for (i = 0; i < host->num_slots; i++) {
2077 struct dw_mci_slot *slot = host->slot[i];
2080 if (slot->mmc->pm_flags & MMC_PM_KEEP_POWER) {
2081 dw_mci_set_ios(slot->mmc, &slot->mmc->ios);
2082 dw_mci_setup_bus(slot, true);
2085 mci_writel(host, RINTSTS, 0xFFFFFFFF);
2086 if (ret_timeout == false) {
2093 printk("[%s] -- Timeout recovery procedure finished --\n",
2094 mmc_hostname(host->mmc));
2097 static const struct mmc_host_ops dw_mci_ops = {
2098 .request = dw_mci_request,
2099 .pre_req = dw_mci_pre_req,
2100 .post_req = dw_mci_post_req,
2101 .set_ios = dw_mci_set_ios,
2102 .get_ro = dw_mci_get_ro,
2103 .get_cd = dw_mci_get_cd,
2104 .set_sdio_status = dw_mci_set_sdio_status,
2105 .hw_reset = dw_mci_hw_reset,
2106 .enable_sdio_irq = dw_mci_enable_sdio_irq,
2107 .execute_tuning = dw_mci_execute_tuning,
2108 .post_tmo = dw_mci_post_tmo,
2109 #ifdef CONFIG_MMC_DW_ROCKCHIP_SWITCH_VOLTAGE
2110 .start_signal_voltage_switch
2111 = dw_mci_start_signal_voltage_switch,
2112 .card_busy = dw_mci_card_busy,
2116 static void dw_mci_deal_data_end(struct dw_mci *host, struct mmc_request *mrq)
2117 __releases(&host->lock)
2118 __acquires(&host->lock)
2120 if (DW_MCI_SEND_STATUS == host->dir_status){
2121 dw_mci_wait_unbusy(host);
2125 static void dw_mci_request_end(struct dw_mci *host, struct mmc_request *mrq)
2126 __releases(&host->lock)
2127 __acquires(&host->lock)
2129 struct dw_mci_slot *slot;
2130 struct mmc_host *prev_mmc = host->cur_slot->mmc;
2132 //WARN_ON(host->cmd || host->data);
2134 dw_mci_deal_data_end(host, mrq);
2137 MMC_DBG_CMD_FUNC(host->mmc,
2138 " reqeust end--reqeuest done, cmd=%d, "
2139 "cmderr=%d, host->state=%d [%s]",
2140 mrq->cmd->opcode, mrq->cmd->error,
2141 host->state,mmc_hostname(host->mmc));
2143 MMC_DBG_CMD_FUNC(host->mmc,
2144 " reqeust end--reqeuest done, cmd=%d, "
2145 "dataerr=%d, host->state=%d [%s]",
2146 mrq->cmd->opcode,mrq->data->error,
2147 host->state, mmc_hostname(host->mmc));
2149 host->cur_slot->mrq = NULL;
2151 if (!list_empty(&host->queue)) {
2152 slot = list_entry(host->queue.next,
2153 struct dw_mci_slot, queue_node);
2154 list_del(&slot->queue_node);
2155 dev_vdbg(host->dev, "list not empty: %s is next\n",
2156 mmc_hostname(slot->mmc));
2157 host->state = STATE_SENDING_CMD;
2158 MMC_DBG_CMD_FUNC(host->mmc,
2159 " list is not empty. run the request in list. [%s]",
2160 mmc_hostname(host->mmc));
2161 dw_mci_start_request(host, slot);
2163 dev_vdbg(host->dev, "list empty\n");
2164 host->state = STATE_IDLE;
2167 spin_unlock(&host->lock);
2168 mmc_request_done(prev_mmc, mrq);
2169 spin_lock(&host->lock);
2172 static void dw_mci_command_complete(struct dw_mci *host, struct mmc_command *cmd)
2174 u32 status = host->cmd_status;
2176 host->cmd_status = 0;
2178 /* Read the response from the card (up to 16 bytes) */
2179 if (cmd->flags & MMC_RSP_PRESENT) {
2180 if (cmd->flags & MMC_RSP_136) {
2181 cmd->resp[3] = mci_readl(host, RESP0);
2182 cmd->resp[2] = mci_readl(host, RESP1);
2183 cmd->resp[1] = mci_readl(host, RESP2);
2184 cmd->resp[0] = mci_readl(host, RESP3);
2186 MMC_DBG_INFO_FUNC(host->mmc,
2187 "Command complete cmd=%d, "
2188 "resp[3]=0x%x, resp[2]=0x%x,resp[1]=0x%x,resp[0]=0x%x.[%s]",
2189 cmd->opcode,cmd->resp[3], cmd->resp[2], cmd->resp[1], cmd->resp[0],
2190 mmc_hostname(host->mmc));
2192 cmd->resp[0] = mci_readl(host, RESP0);
2196 MMC_DBG_INFO_FUNC(host->mmc,
2197 "Command complete cmd=%d,resp[0]=0x%x. [%s]",
2198 cmd->opcode, cmd->resp[0], mmc_hostname(host->mmc));
2202 if (status & SDMMC_INT_RTO)
2204 if(host->mmc->restrict_caps & RESTRICT_CARD_TYPE_SDIO)
2207 cmd->error = -ETIMEDOUT;
2208 }else if ((cmd->flags & MMC_RSP_CRC) && (status & SDMMC_INT_RCRC)){
2209 cmd->error = -EILSEQ;
2210 }else if (status & SDMMC_INT_RESP_ERR){
2216 MMC_DBG_CMD_FUNC(host->mmc,
2217 "Command complete, cmd=%d,cmdError=%d [%s]",
2218 cmd->opcode, cmd->error, mmc_hostname(host->mmc));
2221 if(MMC_SEND_STATUS != cmd->opcode)
2222 if(host->cmd_rto >= SDMMC_CMD_RTO_MAX_HOLD){
2223 MMC_DBG_CMD_FUNC(host->mmc,
2224 "Command complete, cmd=%d,cmdError=%d [%s]",
2225 cmd->opcode, cmd->error, mmc_hostname(host->mmc));
2229 /* newer ip versions need a delay between retries */
2230 if (host->quirks & DW_MCI_QUIRK_RETRY_DELAY)
2235 static void dw_mci_tasklet_func(unsigned long priv)
2237 struct dw_mci *host = (struct dw_mci *)priv;
2238 struct dw_mci_slot *slot = mmc_priv(host->mmc);
2239 struct mmc_data *data;
2240 struct mmc_command *cmd;
2241 enum dw_mci_state state;
2242 enum dw_mci_state prev_state;
2243 u32 status, cmd_flags;
2244 unsigned long timeout = 0;
2247 spin_lock(&host->lock);
2249 state = host->state;
2259 case STATE_SENDING_CMD:
2260 if (!test_and_clear_bit(EVENT_CMD_COMPLETE,
2261 &host->pending_events))
2266 set_bit(EVENT_CMD_COMPLETE, &host->completed_events);
2267 dw_mci_command_complete(host, cmd);
2268 if (cmd == host->mrq->sbc && !cmd->error) {
2269 prev_state = state = STATE_SENDING_CMD;
2270 __dw_mci_start_request(host, host->cur_slot,
2275 if (cmd->data && cmd->error) {
2276 dw_mci_stop_dma(host);
2279 send_stop_cmd(host, data);
2280 state = STATE_SENDING_STOP;
2283 /* host->data = NULL; */
2286 send_stop_abort(host, data);
2287 state = STATE_SENDING_STOP;
2290 set_bit(EVENT_DATA_COMPLETE, &host->completed_events);
2293 if (!host->mrq->data || cmd->error) {
2294 dw_mci_request_end(host, host->mrq);
2298 prev_state = state = STATE_SENDING_DATA;
2301 case STATE_SENDING_DATA:
2302 if (test_and_clear_bit(EVENT_DATA_ERROR,
2303 &host->pending_events)) {
2304 dw_mci_stop_dma(host);
2307 send_stop_cmd(host, data);
2309 /*single block read/write, send stop cmd
2310 manually to prevent host controller halt*/
2311 MMC_DBG_INFO_FUNC(host->mmc,
2312 "%s status 1 0x%08x [%s]\n",
2313 __func__, mci_readl(host, STATUS),
2314 mmc_hostname(host->mmc));
2316 mci_writel(host, CMDARG, 0);
2318 cmd_flags = SDMMC_CMD_STOP | SDMMC_CMD_RESP_CRC |
2319 SDMMC_CMD_RESP_EXP | MMC_STOP_TRANSMISSION;
2321 if(host->mmc->hold_reg_flag)
2322 cmd_flags |= SDMMC_CMD_USE_HOLD_REG;
2324 mci_writel(host, CMD, cmd_flags | SDMMC_CMD_START);
2326 timeout = jiffies + msecs_to_jiffies(500);
2329 ret = time_before(jiffies, timeout);
2330 if (!(mci_readl(host, CMD) & SDMMC_CMD_START))
2334 MMC_DBG_ERR_FUNC(host->mmc,
2335 "%s EVENT_DATA_ERROR recovery failed!!! [%s]\n",
2336 __func__, mmc_hostname(host->mmc));
2339 send_stop_abort(host, data);
2341 state = STATE_DATA_ERROR;
2345 MMC_DBG_CMD_FUNC(host->mmc,
2346 "Pre-state[%d]-->NowState[%d]: STATE_SENDING_DATA, "
2347 "wait for EVENT_XFER_COMPLETE.[%s]",
2348 prev_state, state, mmc_hostname(host->mmc));
2350 if (!test_and_clear_bit(EVENT_XFER_COMPLETE,
2351 &host->pending_events))
2353 MMC_DBG_INFO_FUNC(host->mmc,
2354 "Pre-state[%d]-->NowState[%d]: STATE_SENDING_DATA, "
2355 "wait for EVENT_DATA_COMPLETE. [%s]",
2356 prev_state, state, mmc_hostname(host->mmc));
2358 set_bit(EVENT_XFER_COMPLETE, &host->completed_events);
2359 prev_state = state = STATE_DATA_BUSY;
2362 case STATE_DATA_BUSY:
2363 if (!test_and_clear_bit(EVENT_DATA_COMPLETE,
2364 &host->pending_events))
2367 dw_mci_deal_data_end(host, host->mrq);
2368 MMC_DBG_INFO_FUNC(host->mmc,
2369 "Pre-state[%d]-->NowState[%d]: STATE_DATA_BUSY, "
2370 "after EVENT_DATA_COMPLETE. [%s]",
2371 prev_state, state, mmc_hostname(host->mmc));
2373 /* host->data = NULL; */
2374 set_bit(EVENT_DATA_COMPLETE, &host->completed_events);
2375 status = host->data_status;
2377 if (status & DW_MCI_DATA_ERROR_FLAGS) {
2378 if((SDMMC_CTYPE_1BIT != slot->ctype) &&
2379 (MMC_SEND_EXT_CSD == host->mrq->cmd->opcode))
2380 MMC_DBG_ERR_FUNC(host->mmc,
2381 "Pre-state[%d]-->NowState[%d]: DW_MCI_DATA_ERROR_FLAGS,"
2382 "datastatus=0x%x [%s]",
2383 prev_state, state, status, mmc_hostname(host->mmc));
2385 if (status & SDMMC_INT_DRTO) {
2386 data->error = -ETIMEDOUT;
2387 } else if (status & SDMMC_INT_DCRC) {
2388 data->error = -EILSEQ;
2389 } else if (status & SDMMC_INT_EBE &&
2390 host->dir_status == DW_MCI_SEND_STATUS){
2392 * No data CRC status was returned.
2393 * The number of bytes transferred will
2394 * be exaggerated in PIO mode.
2396 data->bytes_xfered = 0;
2397 data->error = -ETIMEDOUT;
2406 * After an error, there may be data lingering
2407 * in the FIFO, so reset it - doing so
2408 * generates a block interrupt, hence setting
2409 * the scatter-gather pointer to NULL.
2411 dw_mci_fifo_reset(host);
2413 data->bytes_xfered = data->blocks * data->blksz;
2418 MMC_DBG_CMD_FUNC(host->mmc,
2419 "Pre-state[%d]-->NowState[%d]: "
2420 "no stop and no dataerr, exit [%s]",
2421 prev_state, state, mmc_hostname(host->mmc));
2422 dw_mci_request_end(host, host->mrq);
2425 MMC_DBG_CMD_FUNC(host->mmc,
2426 "Pre-state[%d]-->NowState[%d]: begin to stop [%s]",
2427 prev_state, state, mmc_hostname(host->mmc));
2429 if (host->mrq->sbc && !data->error) {
2430 data->stop->error = 0;
2432 MMC_DBG_CMD_FUNC(host->mmc,
2433 "Pre-state[%d]-->NowState[%d]: have stop and sbc, exit [%s]",
2434 prev_state,state,mmc_hostname(host->mmc));
2436 dw_mci_request_end(host, host->mrq);
2440 prev_state = state = STATE_SENDING_STOP;
2442 send_stop_cmd(host, data);
2444 MMC_DBG_CMD_FUNC(host->mmc,
2445 "Pre-state[%d]-->NowState[%d]: begin to STATE_SENDING_STOP [%s]",
2446 prev_state, state, mmc_hostname(host->mmc));
2448 case STATE_SENDING_STOP:
2449 if (!test_and_clear_bit(EVENT_CMD_COMPLETE,
2450 &host->pending_events))
2453 MMC_DBG_CMD_FUNC(host->mmc,
2454 "Pre-state[%d]-->NowState[%d]: begin to send cmd12 [%s]",
2455 prev_state, state, mmc_hostname(host->mmc));
2457 /* CMD error in data command */
2458 if (host->mrq->cmd->error && host->mrq->data) {
2459 dw_mci_fifo_reset(host);
2467 dw_mci_command_complete(host, host->mrq->stop);
2469 if (host->mrq->stop)
2470 dw_mci_command_complete(host, host->mrq->stop);
2472 host->cmd_status = 0;
2475 dw_mci_request_end(host, host->mrq);
2478 case STATE_DATA_ERROR:
2479 if (!test_and_clear_bit(EVENT_XFER_COMPLETE,
2480 &host->pending_events))
2483 state = STATE_DATA_BUSY;
2486 } while (state != prev_state);
2488 host->state = state;
2490 spin_unlock(&host->lock);
2493 /* push final bytes to part_buf, only use during push */
2494 static void dw_mci_set_part_bytes(struct dw_mci *host, void *buf, int cnt)
2496 memcpy((void *)&host->part_buf, buf, cnt);
2497 host->part_buf_count = cnt;
2500 /* append bytes to part_buf, only use during push */
2501 static int dw_mci_push_part_bytes(struct dw_mci *host, void *buf, int cnt)
2503 cnt = min(cnt, (1 << host->data_shift) - host->part_buf_count);
2504 memcpy((void *)&host->part_buf + host->part_buf_count, buf, cnt);
2505 host->part_buf_count += cnt;
2509 /* pull first bytes from part_buf, only use during pull */
2510 static int dw_mci_pull_part_bytes(struct dw_mci *host, void *buf, int cnt)
2512 cnt = min(cnt, (int)host->part_buf_count);
2514 memcpy(buf, (void *)&host->part_buf + host->part_buf_start,
2516 host->part_buf_count -= cnt;
2517 host->part_buf_start += cnt;
2522 /* pull final bytes from the part_buf, assuming it's just been filled */
2523 static void dw_mci_pull_final_bytes(struct dw_mci *host, void *buf, int cnt)
2525 memcpy(buf, &host->part_buf, cnt);
2526 host->part_buf_start = cnt;
2527 host->part_buf_count = (1 << host->data_shift) - cnt;
2530 static void dw_mci_push_data16(struct dw_mci *host, void *buf, int cnt)
2532 struct mmc_data *data = host->data;
2535 /* try and push anything in the part_buf */
2536 if (unlikely(host->part_buf_count)) {
2537 int len = dw_mci_push_part_bytes(host, buf, cnt);
2540 if (host->part_buf_count == 2) {
2541 mci_writew(host, DATA(host->data_offset),
2543 host->part_buf_count = 0;
2546 #ifndef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
2547 if (unlikely((unsigned long)buf & 0x1)) {
2549 u16 aligned_buf[64];
2550 int len = min(cnt & -2, (int)sizeof(aligned_buf));
2551 int items = len >> 1;
2553 /* memcpy from input buffer into aligned buffer */
2554 memcpy(aligned_buf, buf, len);
2557 /* push data from aligned buffer into fifo */
2558 for (i = 0; i < items; ++i)
2559 mci_writew(host, DATA(host->data_offset),
2566 for (; cnt >= 2; cnt -= 2)
2567 mci_writew(host, DATA(host->data_offset), *pdata++);
2570 /* put anything remaining in the part_buf */
2572 dw_mci_set_part_bytes(host, buf, cnt);
2573 /* Push data if we have reached the expected data length */
2574 if ((data->bytes_xfered + init_cnt) ==
2575 (data->blksz * data->blocks))
2576 mci_writew(host, DATA(host->data_offset),
2581 static void dw_mci_pull_data16(struct dw_mci *host, void *buf, int cnt)
2583 #ifndef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
2584 if (unlikely((unsigned long)buf & 0x1)) {
2586 /* pull data from fifo into aligned buffer */
2587 u16 aligned_buf[64];
2588 int len = min(cnt & -2, (int)sizeof(aligned_buf));
2589 int items = len >> 1;
2591 for (i = 0; i < items; ++i)
2592 aligned_buf[i] = mci_readw(host,
2593 DATA(host->data_offset));
2594 /* memcpy from aligned buffer into output buffer */
2595 memcpy(buf, aligned_buf, len);
2603 for (; cnt >= 2; cnt -= 2)
2604 *pdata++ = mci_readw(host, DATA(host->data_offset));
2608 host->part_buf16 = mci_readw(host, DATA(host->data_offset));
2609 dw_mci_pull_final_bytes(host, buf, cnt);
2613 static void dw_mci_push_data32(struct dw_mci *host, void *buf, int cnt)
2615 struct mmc_data *data = host->data;
2618 /* try and push anything in the part_buf */
2619 if (unlikely(host->part_buf_count)) {
2620 int len = dw_mci_push_part_bytes(host, buf, cnt);
2623 if (host->part_buf_count == 4) {
2624 mci_writel(host, DATA(host->data_offset),
2626 host->part_buf_count = 0;
2629 #ifndef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
2630 if (unlikely((unsigned long)buf & 0x3)) {
2632 u32 aligned_buf[32];
2633 int len = min(cnt & -4, (int)sizeof(aligned_buf));
2634 int items = len >> 2;
2636 /* memcpy from input buffer into aligned buffer */
2637 memcpy(aligned_buf, buf, len);
2640 /* push data from aligned buffer into fifo */
2641 for (i = 0; i < items; ++i)
2642 mci_writel(host, DATA(host->data_offset),
2649 for (; cnt >= 4; cnt -= 4)
2650 mci_writel(host, DATA(host->data_offset), *pdata++);
2653 /* put anything remaining in the part_buf */
2655 dw_mci_set_part_bytes(host, buf, cnt);
2656 /* Push data if we have reached the expected data length */
2657 if ((data->bytes_xfered + init_cnt) ==
2658 (data->blksz * data->blocks))
2659 mci_writel(host, DATA(host->data_offset),
2664 static void dw_mci_pull_data32(struct dw_mci *host, void *buf, int cnt)
2666 #ifndef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
2667 if (unlikely((unsigned long)buf & 0x3)) {
2669 /* pull data from fifo into aligned buffer */
2670 u32 aligned_buf[32];
2671 int len = min(cnt & -4, (int)sizeof(aligned_buf));
2672 int items = len >> 2;
2674 for (i = 0; i < items; ++i)
2675 aligned_buf[i] = mci_readl(host,
2676 DATA(host->data_offset));
2677 /* memcpy from aligned buffer into output buffer */
2678 memcpy(buf, aligned_buf, len);
2686 for (; cnt >= 4; cnt -= 4)
2687 *pdata++ = mci_readl(host, DATA(host->data_offset));
2691 host->part_buf32 = mci_readl(host, DATA(host->data_offset));
2692 dw_mci_pull_final_bytes(host, buf, cnt);
2696 static void dw_mci_push_data64(struct dw_mci *host, void *buf, int cnt)
2698 struct mmc_data *data = host->data;
2701 /* try and push anything in the part_buf */
2702 if (unlikely(host->part_buf_count)) {
2703 int len = dw_mci_push_part_bytes(host, buf, cnt);
2707 if (host->part_buf_count == 8) {
2708 mci_writeq(host, DATA(host->data_offset),
2710 host->part_buf_count = 0;
2713 #ifndef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
2714 if (unlikely((unsigned long)buf & 0x7)) {
2716 u64 aligned_buf[16];
2717 int len = min(cnt & -8, (int)sizeof(aligned_buf));
2718 int items = len >> 3;
2720 /* memcpy from input buffer into aligned buffer */
2721 memcpy(aligned_buf, buf, len);
2724 /* push data from aligned buffer into fifo */
2725 for (i = 0; i < items; ++i)
2726 mci_writeq(host, DATA(host->data_offset),
2733 for (; cnt >= 8; cnt -= 8)
2734 mci_writeq(host, DATA(host->data_offset), *pdata++);
2737 /* put anything remaining in the part_buf */
2739 dw_mci_set_part_bytes(host, buf, cnt);
2740 /* Push data if we have reached the expected data length */
2741 if ((data->bytes_xfered + init_cnt) ==
2742 (data->blksz * data->blocks))
2743 mci_writeq(host, DATA(host->data_offset),
2748 static void dw_mci_pull_data64(struct dw_mci *host, void *buf, int cnt)
2750 #ifndef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
2751 if (unlikely((unsigned long)buf & 0x7)) {
2753 /* pull data from fifo into aligned buffer */
2754 u64 aligned_buf[16];
2755 int len = min(cnt & -8, (int)sizeof(aligned_buf));
2756 int items = len >> 3;
2758 for (i = 0; i < items; ++i)
2759 aligned_buf[i] = mci_readq(host,
2760 DATA(host->data_offset));
2761 /* memcpy from aligned buffer into output buffer */
2762 memcpy(buf, aligned_buf, len);
2770 for (; cnt >= 8; cnt -= 8)
2771 *pdata++ = mci_readq(host, DATA(host->data_offset));
2775 host->part_buf = mci_readq(host, DATA(host->data_offset));
2776 dw_mci_pull_final_bytes(host, buf, cnt);
2780 static void dw_mci_pull_data(struct dw_mci *host, void *buf, int cnt)
2784 /* get remaining partial bytes */
2785 len = dw_mci_pull_part_bytes(host, buf, cnt);
2786 if (unlikely(len == cnt))
2791 /* get the rest of the data */
2792 host->pull_data(host, buf, cnt);
2795 static void dw_mci_read_data_pio(struct dw_mci *host, bool dto)
2797 struct sg_mapping_iter *sg_miter = &host->sg_miter;
2799 unsigned int offset;
2800 struct mmc_data *data = host->data;
2801 int shift = host->data_shift;
2804 unsigned int remain, fcnt;
2806 if(!host->mmc->bus_refs){
2807 printk("Note: %s host->mmc->bus_refs is 0!!!\n", __func__);
2811 if (!sg_miter_next(sg_miter))
2814 host->sg = sg_miter->piter.sg;
2815 buf = sg_miter->addr;
2816 remain = sg_miter->length;
2820 fcnt = (SDMMC_GET_FCNT(mci_readl(host, STATUS))
2821 << shift) + host->part_buf_count;
2822 len = min(remain, fcnt);
2825 dw_mci_pull_data(host, (void *)(buf + offset), len);
2826 data->bytes_xfered += len;
2831 sg_miter->consumed = offset;
2832 status = mci_readl(host, MINTSTS);
2833 mci_writel(host, RINTSTS, SDMMC_INT_RXDR);
2834 /* if the RXDR is ready read again */
2835 } while ((status & SDMMC_INT_RXDR) ||
2836 (dto && SDMMC_GET_FCNT(mci_readl(host, STATUS))));
2839 if (!sg_miter_next(sg_miter))
2841 sg_miter->consumed = 0;
2843 sg_miter_stop(sg_miter);
2847 sg_miter_stop(sg_miter);
2851 set_bit(EVENT_XFER_COMPLETE, &host->pending_events);
2854 static void dw_mci_write_data_pio(struct dw_mci *host)
2856 struct sg_mapping_iter *sg_miter = &host->sg_miter;
2858 unsigned int offset;
2859 struct mmc_data *data = host->data;
2860 int shift = host->data_shift;
2863 unsigned int fifo_depth = host->fifo_depth;
2864 unsigned int remain, fcnt;
2866 if (!host->mmc->bus_refs){
2867 printk("Note: %s host->mmc->bus_refs is 0!!!\n", __func__);
2872 if (!sg_miter_next(sg_miter))
2875 host->sg = sg_miter->piter.sg;
2876 buf = sg_miter->addr;
2877 remain = sg_miter->length;
2881 fcnt = ((fifo_depth -
2882 SDMMC_GET_FCNT(mci_readl(host, STATUS)))
2883 << shift) - host->part_buf_count;
2884 len = min(remain, fcnt);
2887 host->push_data(host, (void *)(buf + offset), len);
2888 data->bytes_xfered += len;
2893 sg_miter->consumed = offset;
2894 status = mci_readl(host, MINTSTS);
2895 mci_writel(host, RINTSTS, SDMMC_INT_TXDR);
2896 } while (status & SDMMC_INT_TXDR); /* if TXDR write again */
2899 if (!sg_miter_next(sg_miter))
2901 sg_miter->consumed = 0;
2903 sg_miter_stop(sg_miter);
2907 sg_miter_stop(sg_miter);
2911 set_bit(EVENT_XFER_COMPLETE, &host->pending_events);
2914 static void dw_mci_cmd_interrupt(struct dw_mci *host, u32 status)
2916 if (!host->cmd_status)
2917 host->cmd_status = status;
2924 set_bit(EVENT_CMD_COMPLETE, &host->pending_events);
2925 tasklet_schedule(&host->tasklet);
2928 static irqreturn_t dw_mci_interrupt(int irq, void *dev_id)
2930 struct dw_mci *host = dev_id;
2931 u32 pending, sdio_int;
2934 pending = mci_readl(host, MINTSTS); /* read-only mask reg */
2937 * DTO fix - version 2.10a and below, and only if internal DMA
2940 if (host->quirks & DW_MCI_QUIRK_IDMAC_DTO) {
2942 ((mci_readl(host, STATUS) >> 17) & 0x1fff))
2943 pending |= SDMMC_INT_DATA_OVER;
2947 if (pending & DW_MCI_CMD_ERROR_FLAGS) {
2948 mci_writel(host, RINTSTS, DW_MCI_CMD_ERROR_FLAGS);
2949 host->cmd_status = pending;
2951 MMC_DBG_INFO_FUNC(host->mmc,
2952 "%s cmd_status INT=0x%x,[%s]",
2953 __FUNCTION__, host->cmd_status,
2954 mmc_hostname(host->mmc));
2956 set_bit(EVENT_CMD_COMPLETE, &host->pending_events);
2959 if (pending & DW_MCI_DATA_ERROR_FLAGS) {
2960 /* if there is an error report DATA_ERROR */
2961 mci_writel(host, RINTSTS, DW_MCI_DATA_ERROR_FLAGS);
2962 host->data_status = pending;
2964 printk(KERN_ERR "[%s] Data transmission error !!!! MINTSTS: [0x%08x]\n",
2965 mmc_hostname(host->mmc), pending);
2966 mmc_retune_needed(host->mmc);
2967 set_bit(EVENT_DATA_ERROR, &host->pending_events);
2969 MMC_DBG_INFO_FUNC(host->mmc,
2970 "%s data_status INT=0x%x,[%s]",
2971 __FUNCTION__, host->data_status,
2972 mmc_hostname(host->mmc));
2973 tasklet_schedule(&host->tasklet);
2976 if (pending & SDMMC_INT_DATA_OVER) {
2977 mci_writel(host, RINTSTS, SDMMC_INT_DATA_OVER);
2978 MMC_DBG_CMD_FUNC(host->mmc,
2979 "SDMMC_INT_DATA_OVER, INT-pending=0x%x [%s]",
2980 pending, mmc_hostname(host->mmc));
2981 if (!host->data_status)
2982 host->data_status = pending;
2984 if (host->dir_status == DW_MCI_RECV_STATUS) {
2985 if (host->sg != NULL)
2986 dw_mci_read_data_pio(host, true);
2988 set_bit(EVENT_DATA_COMPLETE, &host->pending_events);
2989 tasklet_schedule(&host->tasklet);
2992 if (pending & SDMMC_INT_RXDR) {
2993 mci_writel(host, RINTSTS, SDMMC_INT_RXDR);
2994 if (host->dir_status == DW_MCI_RECV_STATUS && host->sg)
2995 dw_mci_read_data_pio(host, false);
2998 if (pending & SDMMC_INT_TXDR) {
2999 mci_writel(host, RINTSTS, SDMMC_INT_TXDR);
3000 if (host->dir_status == DW_MCI_SEND_STATUS && host->sg)
3001 dw_mci_write_data_pio(host);
3004 if (pending & SDMMC_INT_VSI) {
3005 MMC_DBG_SW_VOL_FUNC(host->mmc,
3006 "SDMMC_INT_VSI, INT-pending=0x%x. [%s]",
3007 pending, mmc_hostname(host->mmc));
3008 mci_writel(host, RINTSTS, SDMMC_INT_VSI);
3009 dw_mci_cmd_interrupt(host, pending);
3012 if (pending & SDMMC_INT_CMD_DONE) {
3013 MMC_DBG_CMD_FUNC(host->mmc,
3014 "SDMMC_INT_CMD_DONE, CMD = 0x%x, INT-pending=0x%x. [%s]",
3015 mci_readl(host, CMD), pending, mmc_hostname(host->mmc));
3016 mci_writel(host, RINTSTS, SDMMC_INT_CMD_DONE);
3017 dw_mci_cmd_interrupt(host, pending);
3020 if (pending & SDMMC_INT_CD) {
3021 mci_writel(host, RINTSTS, SDMMC_INT_CD);
3022 MMC_DBG_INFO_FUNC(host->mmc,
3023 "SDMMC_INT_CD, INT-pending=0x%x. [%s]",
3024 pending, mmc_hostname(host->mmc));
3025 wake_lock_timeout(&host->mmc->detect_wake_lock, 5 * HZ);
3026 queue_work(host->card_workqueue, &host->card_work);
3029 if (pending & SDMMC_INT_HLE) {
3030 mci_writel(host, RINTSTS, SDMMC_INT_HLE);
3031 MMC_DBG_CMD_FUNC(host->mmc,
3032 "SDMMC_INT_HLE INT-pending=0x%x. [%s]\n",
3033 pending, mmc_hostname(host->mmc));
3037 /* Handle SDIO Interrupts */
3038 for (i = 0; i < host->num_slots; i++) {
3039 struct dw_mci_slot *slot = host->slot[i];
3041 if (host->verid < DW_MMC_240A)
3042 sdio_int = SDMMC_INT_SDIO(i);
3044 sdio_int = SDMMC_INT_SDIO(i + 8);
3046 if (pending & sdio_int) {
3047 mci_writel(host, RINTSTS, sdio_int);
3048 mmc_signal_sdio_irq(slot->mmc);
3054 #ifdef CONFIG_MMC_DW_IDMAC
3055 /* External DMA Soc platform NOT need to ack interrupt IDSTS */
3056 if (!(cpu_is_rk3036() || cpu_is_rk312x())){
3057 /* Handle DMA interrupts */
3058 pending = mci_readl(host, IDSTS);
3059 if (pending & (SDMMC_IDMAC_INT_TI | SDMMC_IDMAC_INT_RI)) {
3060 mci_writel(host, IDSTS, SDMMC_IDMAC_INT_TI | SDMMC_IDMAC_INT_RI);
3061 mci_writel(host, IDSTS, SDMMC_IDMAC_INT_NI);
3062 host->dma_ops->complete((void *)host);
3070 static void dw_mci_work_routine_card(struct work_struct *work)
3072 struct dw_mci *host = container_of(work, struct dw_mci, card_work);
3075 for (i = 0; i < host->num_slots; i++) {
3076 struct dw_mci_slot *slot = host->slot[i];
3077 struct mmc_host *mmc = slot->mmc;
3078 struct mmc_request *mrq;
3081 present = dw_mci_get_cd(mmc);
3083 /* Card insert, switch data line to uart function, and vice verse.
3084 ONLY audi chip need switched by software, using udbg tag in dts!
3086 if (!(IS_ERR(host->pins_udbg)) &&
3087 !(IS_ERR(host->pins_default))) {
3089 if (pinctrl_select_state(host->pinctrl,
3090 host->pins_default) < 0)
3092 "%s: Default pinctrl setting failed!\n",
3093 mmc_hostname(host->mmc));
3095 if (pinctrl_select_state(host->pinctrl,
3096 host->pins_udbg) < 0)
3098 "%s: Udbg pinctrl setting failed!\n",
3099 mmc_hostname(host->mmc));
3103 while (present != slot->last_detect_state) {
3104 dev_dbg(&slot->mmc->class_dev, "card %s\n",
3105 present ? "inserted" : "removed");
3106 MMC_DBG_BOOT_FUNC(mmc, " The card is %s. ===!!!!!!==[%s]\n",
3107 present ? "inserted" : "removed.", mmc_hostname(mmc));
3109 dw_mci_ctrl_all_reset(host);
3110 /* Stop edma when rountine card triggered */
3111 if(cpu_is_rk3036() || cpu_is_rk312x())
3112 if(host->dma_ops && host->dma_ops->stop)
3113 host->dma_ops->stop(host);
3114 rk_send_wakeup_key();//wake up system
3115 spin_lock_bh(&host->lock);
3117 /* Card change detected */
3118 slot->last_detect_state = present;
3120 /* Clean up queue if present */
3123 if (mrq == host->mrq) {
3127 switch (host->state) {
3130 case STATE_SENDING_CMD:
3131 mrq->cmd->error = -ENOMEDIUM;
3135 case STATE_SENDING_DATA:
3136 mrq->data->error = -ENOMEDIUM;
3137 dw_mci_stop_dma(host);
3139 case STATE_DATA_BUSY:
3140 case STATE_DATA_ERROR:
3141 if (mrq->data->error == -EINPROGRESS)
3142 mrq->data->error = -ENOMEDIUM;
3146 case STATE_SENDING_STOP:
3147 mrq->stop->error = -ENOMEDIUM;
3151 dw_mci_request_end(host, mrq);
3153 list_del(&slot->queue_node);
3154 mrq->cmd->error = -ENOMEDIUM;
3156 mrq->data->error = -ENOMEDIUM;
3158 mrq->stop->error = -ENOMEDIUM;
3160 MMC_DBG_CMD_FUNC(host->mmc,
3161 "dw_mci_work--reqeuest done, cmd=%d [%s]",
3162 mrq->cmd->opcode, mmc_hostname(mmc));
3164 spin_unlock(&host->lock);
3165 mmc_request_done(slot->mmc, mrq);
3166 spin_lock(&host->lock);
3170 /* Power down slot */
3172 /* Clear down the FIFO */
3173 dw_mci_fifo_reset(host);
3174 #ifdef CONFIG_MMC_DW_IDMAC
3175 if (!(cpu_is_rk3036() || cpu_is_rk312x()))
3176 dw_mci_idmac_reset(host);
3180 spin_unlock_bh(&host->lock);
3182 present = dw_mci_get_cd(mmc);
3185 mmc_detect_change(slot->mmc,
3186 msecs_to_jiffies(host->pdata->detect_delay_ms));
3191 /* given a slot id, find out the device node representing that slot */
3192 static struct device_node *dw_mci_of_find_slot_node(struct device *dev, u8 slot)
3194 struct device_node *np;
3198 if (!dev || !dev->of_node)
3201 for_each_child_of_node(dev->of_node, np) {
3202 addr = of_get_property(np, "reg", &len);
3203 if (!addr || (len < sizeof(int)))
3205 if (be32_to_cpup(addr) == slot)
3211 static struct dw_mci_of_slot_quirks {
3214 } of_slot_quirks[] = {
3216 .quirk = "disable-wp",
3217 .id = DW_MCI_SLOT_QUIRK_NO_WRITE_PROTECT,
3221 static int dw_mci_of_get_slot_quirks(struct device *dev, u8 slot)
3223 struct device_node *np = dw_mci_of_find_slot_node(dev, slot);
3228 for (idx = 0; idx < ARRAY_SIZE(of_slot_quirks); idx++)
3229 if (of_get_property(np, of_slot_quirks[idx].quirk, NULL))
3230 quirks |= of_slot_quirks[idx].id;
3235 /* find out bus-width for a given slot */
3236 static u32 dw_mci_of_get_bus_wd(struct device *dev, u8 slot)
3238 struct device_node *np = dev->of_node;//dw_mci_of_find_slot_node(dev, slot);
3244 if (of_property_read_u32(np, "bus-width", &bus_wd))
3245 dev_err(dev, "bus-width property not found, assuming width"
3251 /* find the pwr-en gpio for a given slot; or -1 if none specified */
3252 static int dw_mci_of_get_pwr_en_gpio(struct device *dev, u8 slot)
3254 struct device_node *np = dev->of_node;//dw_mci_of_find_slot_node(dev, slot);
3260 gpio = of_get_named_gpio(np, "pwr-gpios", 0);
3262 /* Having a missing entry is valid; return silently */
3263 if (!gpio_is_valid(gpio))
3266 if (devm_gpio_request(dev, gpio, "dw-mci-pwr_en")) {
3267 dev_warn(dev, "gpio [%d] request failed\n", gpio);
3271 gpio_direction_output(gpio, 0);//set 0 to pwr-en
3277 /* find the write protect gpio for a given slot; or -1 if none specified */
3278 static int dw_mci_of_get_wp_gpio(struct device *dev, u8 slot)
3280 struct device_node *np = dw_mci_of_find_slot_node(dev, slot);
3286 gpio = of_get_named_gpio(np, "wp-gpios", 0);
3288 /* Having a missing entry is valid; return silently */
3289 if (!gpio_is_valid(gpio))
3292 if (devm_gpio_request(dev, gpio, "dw-mci-wp")) {
3293 dev_warn(dev, "gpio [%d] request failed\n", gpio);
3300 /* find the cd gpio for a given slot */
3301 static void dw_mci_of_get_cd_gpio(struct device *dev, u8 slot,
3302 struct mmc_host *mmc)
3304 struct device_node *np = dev->of_node;//dw_mci_of_find_slot_node(dev, slot);
3310 gpio = of_get_named_gpio(np, "cd-gpios", 0);
3312 /* Having a missing entry is valid; return silently */
3313 if (!gpio_is_valid(gpio))
3316 if (mmc_gpio_request_cd(mmc, gpio, 0))
3317 dev_warn(dev, "gpio [%d] request failed\n", gpio);
3320 static irqreturn_t dw_mci_gpio_cd_irqt(int irq, void *dev_id)
3322 struct mmc_host *mmc = dev_id;
3323 struct dw_mci_slot *slot = mmc_priv(mmc);
3324 struct dw_mci *host = slot->host;
3325 int gpio_cd = slot->cd_gpio;
3327 (gpio_get_value(gpio_cd) == 0) ?
3328 irq_set_irq_type(irq, IRQF_TRIGGER_HIGH | IRQF_ONESHOT) :
3329 irq_set_irq_type(irq, IRQF_TRIGGER_LOW | IRQF_ONESHOT);
3331 /* wakeup system whether gpio debounce or not */
3332 rk_send_wakeup_key();
3334 /* no need to trigger detect flow when rescan is disabled.
3335 This case happended in dpm, that we just wakeup system and
3336 let suspend_post notify callback handle it.
3338 if(mmc->rescan_disable == 0)
3339 queue_work(host->card_workqueue, &host->card_work);
3341 printk("%s: rescan been disabled!\n", __FUNCTION__);
3346 static void dw_mci_of_set_cd_gpio_irq(struct device *dev, u32 gpio,
3347 struct mmc_host *mmc)
3349 struct dw_mci_slot *slot = mmc_priv(mmc);
3350 struct dw_mci *host = slot->host;
3354 /* Having a missing entry is valid; return silently */
3355 if (!gpio_is_valid(gpio))
3358 irq = gpio_to_irq(gpio);
3360 ret = devm_request_threaded_irq(
3361 &mmc->class_dev, irq,
3362 NULL, dw_mci_gpio_cd_irqt,
3363 IRQF_TRIGGER_LOW | IRQF_ONESHOT,
3368 "Request cd-gpio %d interrupt error!\n", gpio);
3370 /* enable wakeup event for gpio-cd in idle or deep suspend*/
3371 enable_irq_wake(irq);
3374 dev_err(host->dev, "Cannot convert gpio %d to irq!\n", gpio);
3378 static void dw_mci_of_free_cd_gpio_irq(struct device *dev, u32 gpio,
3379 struct mmc_host *mmc)
3381 if (!gpio_is_valid(gpio))
3384 if (gpio_to_irq(gpio) >= 0) {
3385 devm_free_irq(&mmc->class_dev, gpio_to_irq(gpio), mmc);
3386 devm_gpio_free(&mmc->class_dev, gpio);
3389 #else /* CONFIG_OF */
3390 static int dw_mci_of_get_slot_quirks(struct device *dev, u8 slot)
3394 static u32 dw_mci_of_get_bus_wd(struct device *dev, u8 slot)
3398 static struct device_node *dw_mci_of_find_slot_node(struct device *dev, u8 slot)
3402 static int dw_mci_of_get_wp_gpio(struct device *dev, u8 slot)
3406 static void dw_mci_of_get_cd_gpio(struct device *dev, u8 slot,
3407 struct mmc_host *mmc)
3411 #endif /* CONFIG_OF */
3413 /* @host: dw_mci host prvdata
3414 * Init pinctrl for each platform. Usually we assign
3415 * "defalut" tag for functional usage, "idle" tag for gpio
3416 * state and "udbg" tag for uart_dbg if any.
3418 static void dw_mci_init_pinctrl(struct dw_mci *host)
3420 /* Fixme: DON'T TOUCH EMMC SETTING! */
3421 if (host->mmc->restrict_caps & RESTRICT_CARD_TYPE_EMMC)
3424 /* Get pinctrl for DTS */
3425 host->pinctrl = devm_pinctrl_get(host->dev);
3426 if (IS_ERR(host->pinctrl)) {
3427 dev_err(host->dev, "%s: No pinctrl used!\n",
3428 mmc_hostname(host->mmc));
3432 /* Lookup idle state */
3434 pinctrl_lookup_state(host->pinctrl, PINCTRL_STATE_IDLE);
3435 if (IS_ERR(host->pins_idle)) {
3436 dev_err(host->dev, "%s: No idle tag found!\n",
3437 mmc_hostname(host->mmc));
3439 if (pinctrl_select_state(host->pinctrl, host->pins_idle) < 0)
3441 "%s: Idle pinctrl setting failed!\n",
3442 mmc_hostname(host->mmc));
3445 /* Lookup default state */
3446 host->pins_default =
3447 pinctrl_lookup_state(host->pinctrl, PINCTRL_STATE_DEFAULT);
3448 if (IS_ERR(host->pins_default)) {
3449 dev_err(host->dev, "%s: No default pinctrl found!\n",
3450 mmc_hostname(host->mmc));
3452 if (pinctrl_select_state(host->pinctrl, host->pins_default) < 0)
3454 "%s: Default pinctrl setting failed!\n",
3455 mmc_hostname(host->mmc));
3458 /* Sd card data0/1 may be used for uart_dbg, so were data2/3 for Jtag */
3459 if ((host->mmc->restrict_caps & RESTRICT_CARD_TYPE_SD)) {
3460 host->pins_udbg = pinctrl_lookup_state(host->pinctrl, "udbg");
3461 if (IS_ERR(host->pins_udbg)) {
3462 dev_warn(host->dev, "%s: No udbg pinctrl found!\n",
3463 mmc_hostname(host->mmc));
3465 if (!dw_mci_get_cd(host->mmc))
3466 if (pinctrl_select_state(host->pinctrl, host->pins_udbg) < 0)
3467 dev_err(host->dev, "%s: Udbg pinctrl setting failed!\n",
3468 mmc_hostname(host->mmc));
3473 static int dw_mci_pm_notify(struct notifier_block *notify_block,
3474 unsigned long mode, void *unused)
3476 struct mmc_host *host = container_of(
3477 notify_block, struct mmc_host, pm_notify);
3478 unsigned long flags;
3481 case PM_HIBERNATION_PREPARE:
3482 case PM_SUSPEND_PREPARE:
3483 dev_err(host->parent,
3484 "dw_mci_pm_notify: suspend prepare\n");
3485 spin_lock_irqsave(&host->lock, flags);
3486 host->rescan_disable = 1;
3487 spin_unlock_irqrestore(&host->lock, flags);
3488 if (cancel_delayed_work(&host->detect))
3489 wake_unlock(&host->detect_wake_lock);
3492 case PM_POST_SUSPEND:
3493 case PM_POST_HIBERNATION:
3494 case PM_POST_RESTORE:
3495 dev_err(host->parent,
3496 "dw_mci_pm_notify: post suspend\n");
3497 spin_lock_irqsave(&host->lock, flags);
3498 host->rescan_disable = 0;
3499 spin_unlock_irqrestore(&host->lock, flags);
3500 mmc_detect_change(host, 10);
3506 static int dw_mci_init_slot(struct dw_mci *host, unsigned int id)
3508 struct mmc_host *mmc;
3509 struct dw_mci_slot *slot;
3510 const struct dw_mci_drv_data *drv_data = host->drv_data;
3515 mmc = mmc_alloc_host(sizeof(struct dw_mci_slot), host->dev);
3519 slot = mmc_priv(mmc);
3523 host->slot[id] = slot;
3526 slot->quirks = dw_mci_of_get_slot_quirks(host->dev, slot->id);
3528 mmc->ops = &dw_mci_ops;
3530 if (of_property_read_u32_array(host->dev->of_node,
3531 "clock-freq-min-max", freq, 2)) {
3532 mmc->f_min = DW_MCI_FREQ_MIN;
3533 mmc->f_max = DW_MCI_FREQ_MAX;
3535 printk("%s: fmin=%d, fmax=%d [%s]\n",
3536 __FUNCTION__, mmc->f_min,
3537 mmc->f_max, mmc_hostname(mmc));
3539 mmc->f_min = freq[0];
3540 mmc->f_max = freq[1];
3542 printk("%s: fmin=%d, fmax=%d [%s]\n",
3543 __FUNCTION__, mmc->f_min,
3544 mmc->f_max, mmc_hostname(mmc));
3547 if (of_find_property(host->dev->of_node, "supports-sd", NULL))
3548 mmc->restrict_caps |= RESTRICT_CARD_TYPE_SD;
3549 if (of_find_property(host->dev->of_node, "supports-sdio", NULL))
3550 mmc->restrict_caps |= RESTRICT_CARD_TYPE_SDIO;
3551 if (of_find_property(host->dev->of_node, "supports-emmc", NULL))
3552 mmc->restrict_caps |= RESTRICT_CARD_TYPE_EMMC;
3554 if (mmc->restrict_caps & RESTRICT_CARD_TYPE_SD) {
3555 mmc->pm_notify.notifier_call = dw_mci_pm_notify;
3556 if (register_pm_notifier(&mmc->pm_notify)) {
3557 pr_err("dw_mci: register_pm_notifier failed\n");
3558 goto err_pm_notifier;
3562 if (host->cid == DW_MCI_TYPE_RK3368) {
3563 if (IS_ERR(host->grf))
3564 pr_err("rk_sdmmc: dts couldn't find grf regmap for 3368\n");
3566 /* Disable force_jtag */
3567 regmap_write(host->grf, 0x43c, (1<<13)<<16 | (0 << 13));
3568 } else if (cpu_is_rk3288()) {
3569 grf_writel(((1 << 12) << 16) | (0 << 12), RK3288_GRF_SOC_CON0);
3572 /* We assume only low-level chip use gpio_cd */
3573 if ((soc_is_rk3126() || soc_is_rk3126b() || soc_is_rk3036()) &&
3574 (host->mmc->restrict_caps & RESTRICT_CARD_TYPE_SD)) {
3575 slot->cd_gpio = of_get_named_gpio(host->dev->of_node, "cd-gpios", 0);
3576 if (gpio_is_valid(slot->cd_gpio)) {
3577 /* Request gpio int for card detection */
3578 dw_mci_of_set_cd_gpio_irq(host->dev, slot->cd_gpio,host->mmc);
3580 slot->cd_gpio = -ENODEV;
3581 dev_err(host->dev, "failed to get your cd-gpios!\n");
3585 if (host->pdata->get_ocr)
3586 mmc->ocr_avail = host->pdata->get_ocr(id);
3589 mmc->ocr_avail = MMC_VDD_27_28 | MMC_VDD_28_29 | MMC_VDD_29_30 |
3590 MMC_VDD_30_31 | MMC_VDD_31_32 | MMC_VDD_32_33|
3591 MMC_VDD_33_34 | MMC_VDD_34_35 | MMC_VDD_35_36 |
3592 MMC_VDD_26_27 | MMC_VDD_25_26 | MMC_VDD_24_25 |
3593 MMC_VDD_23_24 | MMC_VDD_22_23 | MMC_VDD_21_22 |
3594 MMC_VDD_20_21 | MMC_VDD_165_195;
3598 * Start with slot power disabled, it will be enabled when a card
3601 if (host->pdata->setpower)
3602 host->pdata->setpower(id, 0);
3604 if (host->pdata->caps)
3605 mmc->caps = host->pdata->caps;
3607 if (host->pdata->pm_caps)
3608 mmc->pm_caps = host->pdata->pm_caps;
3610 if (host->dev->of_node) {
3611 ctrl_id = of_alias_get_id(host->dev->of_node, "mshc");
3615 ctrl_id = to_platform_device(host->dev)->id;
3617 if (drv_data && drv_data->caps)
3618 mmc->caps |= drv_data->caps[ctrl_id];
3619 if (drv_data && drv_data->hold_reg_flag)
3620 mmc->hold_reg_flag |= drv_data->hold_reg_flag[ctrl_id];
3622 /* set the compatibility of driver. */
3623 mmc->caps |= MMC_CAP_UHS_SDR12 | MMC_CAP_UHS_SDR25 | MMC_CAP_UHS_SDR50
3624 | MMC_CAP_UHS_SDR104 | MMC_CAP_ERASE ;
3626 if (host->pdata->caps2)
3627 mmc->caps2 = host->pdata->caps2;
3629 if (host->pdata->get_bus_wd)
3630 bus_width = host->pdata->get_bus_wd(slot->id);
3631 else if (host->dev->of_node)
3632 bus_width = dw_mci_of_get_bus_wd(host->dev, slot->id);
3636 switch (bus_width) {
3638 mmc->caps |= MMC_CAP_8_BIT_DATA;
3640 mmc->caps |= MMC_CAP_4_BIT_DATA;
3643 if (of_find_property(host->dev->of_node, "cap-power-off-card", NULL))
3644 mmc->caps |= MMC_CAP_POWER_OFF_CARD;
3645 if (of_find_property(host->dev->of_node, "cap-sdio-irq", NULL))
3646 mmc->caps |= MMC_CAP_SDIO_IRQ;
3647 if (of_find_property(host->dev->of_node, "poll-hw-reset", NULL))
3648 mmc->caps |= MMC_CAP_HW_RESET;
3649 if (of_find_property(host->dev->of_node, "full-pwr-cycle", NULL))
3650 mmc->caps2 |= MMC_CAP2_FULL_PWR_CYCLE;
3651 if (of_find_property(host->dev->of_node, "keep-power-in-suspend", NULL))
3652 mmc->pm_caps |= MMC_PM_KEEP_POWER;
3653 if (of_find_property(host->dev->of_node, "ignore-pm-notify", NULL))
3654 mmc->pm_caps |= MMC_PM_IGNORE_PM_NOTIFY;
3655 if (of_find_property(host->dev->of_node, "enable-sdio-wakeup", NULL))
3656 mmc->pm_caps |= MMC_PM_WAKE_SDIO_IRQ;
3658 /*Assign pm_caps pass to pm_flags*/
3659 mmc->pm_flags = mmc->pm_caps;
3661 if (host->pdata->blk_settings) {
3662 mmc->max_segs = host->pdata->blk_settings->max_segs;
3663 mmc->max_blk_size = host->pdata->blk_settings->max_blk_size;
3664 mmc->max_blk_count = host->pdata->blk_settings->max_blk_count;
3665 mmc->max_req_size = host->pdata->blk_settings->max_req_size;
3666 mmc->max_seg_size = host->pdata->blk_settings->max_seg_size;
3668 /* Useful defaults if platform data is unset. */
3669 #ifdef CONFIG_MMC_DW_IDMAC
3670 mmc->max_segs = host->ring_size;
3671 mmc->max_blk_size = 65536;
3672 mmc->max_blk_count = host->ring_size;
3673 mmc->max_seg_size = 0x1000;
3674 mmc->max_req_size = mmc->max_seg_size * mmc->max_blk_count;
3675 if(cpu_is_rk3036() || cpu_is_rk312x()){
3676 /* fixup for external dmac setting */
3678 mmc->max_blk_size = 65536; /* BLKSIZ is 16 bits */
3679 mmc->max_blk_count = 65535;
3680 mmc->max_req_size = mmc->max_blk_size * mmc->max_blk_count;
3681 mmc->max_seg_size = mmc->max_req_size;
3685 mmc->max_blk_size = 65536; /* BLKSIZ is 16 bits */
3686 mmc->max_blk_count = 512;
3687 mmc->max_req_size = mmc->max_blk_size * mmc->max_blk_count;
3688 mmc->max_seg_size = mmc->max_req_size;
3689 #endif /* CONFIG_MMC_DW_IDMAC */
3693 slot->pwr_en_gpio = dw_mci_of_get_pwr_en_gpio(host->dev, slot->id);
3695 if (!(mmc->restrict_caps & RESTRICT_CARD_TYPE_SD))
3700 if(mmc->restrict_caps & RESTRICT_CARD_TYPE_SD)
3701 host->vmmc = devm_regulator_get(mmc_dev(mmc), "vmmc");
3705 if (IS_ERR(host->vmmc)) {
3706 pr_info("%s: no vmmc regulator found\n", mmc_hostname(mmc));
3709 ret = regulator_enable(host->vmmc);
3712 "failed to enable regulator: %d\n", ret);
3719 slot->wp_gpio = dw_mci_of_get_wp_gpio(host->dev, slot->id);
3721 if (mmc->restrict_caps & RESTRICT_CARD_TYPE_SDIO)
3722 clear_bit(DW_MMC_CARD_PRESENT, &slot->flags);
3724 dw_mci_init_pinctrl(host);
3725 ret = mmc_add_host(mmc);
3729 #if defined(CONFIG_DEBUG_FS)
3730 dw_mci_init_debugfs(slot);
3733 /* Card initially undetected */
3734 slot->last_detect_state = 1;
3738 unregister_pm_notifier(&mmc->pm_notify);
3741 if (gpio_is_valid(slot->cd_gpio))
3742 dw_mci_of_free_cd_gpio_irq(host->dev, slot->cd_gpio,host->mmc);
3747 static void dw_mci_cleanup_slot(struct dw_mci_slot *slot, unsigned int id)
3749 /* Shutdown detect IRQ */
3750 if (slot->host->pdata->exit)
3751 slot->host->pdata->exit(id);
3753 /* Debugfs stuff is cleaned up by mmc core */
3754 mmc_remove_host(slot->mmc);
3755 slot->host->slot[id] = NULL;
3756 mmc_free_host(slot->mmc);
3759 static void dw_mci_init_dma(struct dw_mci *host)
3761 /* Alloc memory for sg translation */
3762 host->sg_cpu = dmam_alloc_coherent(host->dev, PAGE_SIZE,
3763 &host->sg_dma, GFP_KERNEL);
3764 if (!host->sg_cpu) {
3765 dev_err(host->dev, "%s: could not alloc DMA memory\n",
3770 /* Determine which DMA interface to use */
3771 #if defined(CONFIG_MMC_DW_IDMAC)
3772 if(cpu_is_rk3036() || cpu_is_rk312x()){
3773 host->dma_ops = &dw_mci_edmac_ops;
3774 dev_info(host->dev, "Using external DMA controller.\n");
3776 host->dma_ops = &dw_mci_idmac_ops;
3777 dev_info(host->dev, "Using internal DMA controller.\n");
3784 if (host->dma_ops->init && host->dma_ops->start &&
3785 host->dma_ops->stop && host->dma_ops->cleanup) {
3786 if (host->dma_ops->init(host)) {
3787 dev_err(host->dev, "%s: Unable to initialize "
3788 "DMA Controller.\n", __func__);
3792 dev_err(host->dev, "DMA initialization not found.\n");
3800 dev_info(host->dev, "Using PIO mode.\n");
3805 static bool dw_mci_ctrl_reset(struct dw_mci *host, u32 reset)
3807 unsigned long timeout = jiffies + msecs_to_jiffies(500);
3810 ctrl = mci_readl(host, CTRL);
3812 mci_writel(host, CTRL, ctrl);
3814 /* wait till resets clear */
3816 ctrl = mci_readl(host, CTRL);
3817 if (!(ctrl & reset))
3819 } while (time_before(jiffies, timeout));
3822 "Timeout resetting block (ctrl reset %#x)\n",
3828 static inline bool dw_mci_fifo_reset(struct dw_mci *host)
3831 * Reseting generates a block interrupt, hence setting
3832 * the scatter-gather pointer to NULL.
3835 sg_miter_stop(&host->sg_miter);
3839 return dw_mci_ctrl_reset(host, SDMMC_CTRL_FIFO_RESET);
3842 static inline bool dw_mci_ctrl_all_reset(struct dw_mci *host)
3844 return dw_mci_ctrl_reset(host,
3845 SDMMC_CTRL_FIFO_RESET |
3847 SDMMC_CTRL_DMA_RESET);
3850 static void dw_mci_rst_pre_suspend(struct dw_mci *host)
3855 buffer = host->regs_buffer;
3857 for (index = 0; index < DW_REGS_NUM ; index++){
3858 *buffer = mci_readreg(host, index*4);
3859 MMC_DBG_INFO_FUNC(host->mmc, "[%s] :0x%08x.\n",
3860 dw_mci_regs[index].name, *buffer);
3864 *buffer = mci_readl(host,CDTHRCTL);
3865 MMC_DBG_INFO_FUNC(host->mmc, "[%s] :0x%08x.\n", "CARDTHRCTL", *buffer);
3868 static void dw_mci_rst_post_resume(struct dw_mci *host)
3873 buffer = host->regs_buffer;
3875 for (index = 0; index < DW_REGS_NUM; index++){
3876 mci_writereg(host, index*4, *buffer);
3879 mci_writel(host, CDTHRCTL, *buffer);
3882 static const struct dw_mci_rst_ops dw_mci_pdrst_ops = {
3883 .pre_suspend = dw_mci_rst_pre_suspend,
3884 .post_resume = dw_mci_rst_post_resume,
3889 static struct dw_mci_of_quirks {
3894 .quirk = "broken-cd",
3895 .id = DW_MCI_QUIRK_BROKEN_CARD_DETECTION,
3899 static struct dw_mci_board *dw_mci_parse_dt(struct dw_mci *host)
3901 struct dw_mci_board *pdata;
3902 struct device *dev = host->dev;
3903 struct device_node *np = dev->of_node;
3904 const struct dw_mci_drv_data *drv_data = host->drv_data;
3906 u32 clock_frequency;
3908 pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
3910 dev_err(dev, "could not allocate memory for pdata\n");
3911 return ERR_PTR(-ENOMEM);
3914 /* find out number of slots supported */
3915 if (of_property_read_u32(dev->of_node, "num-slots",
3916 &pdata->num_slots)) {
3917 dev_info(dev, "num-slots property not found, "
3918 "assuming 1 slot is available\n");
3919 pdata->num_slots = 1;
3922 if (of_property_read_u32(np, "fifo-depth", &pdata->fifo_depth))
3923 dev_info(dev, "fifo-depth property not found, using "
3924 "value of FIFOTH register as default\n");
3926 of_property_read_u32(np, "card-detect-delay", &pdata->detect_delay_ms);
3928 if (!of_property_read_u32(np, "clock-frequency", &clock_frequency))
3929 pdata->bus_hz = clock_frequency;
3931 if (drv_data && drv_data->parse_dt) {
3932 ret = drv_data->parse_dt(host);
3934 return ERR_PTR(ret);
3937 if (of_find_property(np, "keep-power-in-suspend", NULL))
3938 pdata->pm_caps |= MMC_PM_KEEP_POWER;
3940 if (of_find_property(np, "enable-sdio-wakeup", NULL))
3941 pdata->pm_caps |= MMC_PM_WAKE_SDIO_IRQ;
3943 if (of_find_property(np, "supports-highspeed", NULL))
3944 pdata->caps |= MMC_CAP_SD_HIGHSPEED | MMC_CAP_MMC_HIGHSPEED;
3946 if (of_find_property(np, "supports-UHS_SDR104", NULL))
3947 pdata->caps |= MMC_CAP_UHS_SDR104 | MMC_CAP_UHS_SDR50;
3949 if (of_find_property(np, "supports-DDR_MODE", NULL))
3950 pdata->caps |= MMC_CAP_1_8V_DDR | MMC_CAP_1_2V_DDR;
3952 if (of_find_property(np, "caps2-mmc-hs200", NULL))
3953 pdata->caps2 |= MMC_CAP2_HS200;
3955 if (of_find_property(np, "caps2-mmc-hs200-1_8v", NULL))
3956 pdata->caps2 |= MMC_CAP2_HS200_1_8V_SDR;
3958 if (of_find_property(np, "caps2-mmc-hs200-1_2v", NULL))
3959 pdata->caps2 |= MMC_CAP2_HS200_1_2V_SDR;
3961 if (of_get_property(np, "cd-inverted", NULL))
3962 pdata->caps2 |= MMC_CAP2_CD_ACTIVE_HIGH;
3964 if (of_get_property(np, "bootpart-no-access", NULL))
3965 pdata->caps2 |= MMC_CAP2_BOOTPART_NOACC;
3967 if (of_get_property(np, "controller-power-down", NULL)) {
3969 (u32 *)devm_kzalloc(host->dev,
3970 DW_REGS_SIZE, GFP_KERNEL);
3971 if (!host->regs_buffer) {
3973 "could not allocate memory for regs_buffer\n");
3974 return ERR_PTR(-ENOMEM);
3977 host->rst_ops = &dw_mci_pdrst_ops;
3980 if (of_get_property(np, "assume_removable", NULL))
3981 mmc_assume_removable = 0;
3983 if (!of_property_read_u32(np, "cru_regsbase", &host->cru_regsbase)) {
3984 printk("dw cru_regsbase addr 0x%03x.\n", host->cru_regsbase);
3986 pr_err("dw cru_regsbase addr is missing!\n");
3990 if (!of_property_read_u32(np, "cru_reset_offset", &host->cru_reset_offset)) {
3991 printk("dw cru_reset_offset val %d.\n", host->cru_reset_offset);
3993 pr_err("dw cru_reset_offset val is missing!\n");
4000 #else /* CONFIG_OF */
4001 static struct dw_mci_board *dw_mci_parse_dt(struct dw_mci *host)
4003 return ERR_PTR(-EINVAL);
4005 #endif /* CONFIG_OF */
4007 int dw_mci_probe(struct dw_mci *host)
4009 const struct dw_mci_drv_data *drv_data = host->drv_data;
4010 int width, i, ret = 0;
4016 host->pdata = dw_mci_parse_dt(host);
4017 if (IS_ERR(host->pdata)) {
4018 dev_err(host->dev, "platform data not available\n");
4023 if (!host->pdata->select_slot && host->pdata->num_slots > 1) {
4025 "Platform data must supply select_slot function\n");
4030 * In 2.40a spec, Data offset is changed.
4031 * Need to check the version-id and set data-offset for DATA register.
4033 host->verid = SDMMC_GET_VERID(mci_readl(host, VERID));
4034 dev_info(host->dev, "Version ID is %04x\n", host->verid);
4036 if (host->verid < DW_MMC_240A)
4037 host->data_offset = DATA_OFFSET;
4039 host->data_offset = DATA_240A_OFFSET;
4042 host->hpclk_mmc= devm_clk_get(host->dev, "hpclk_mmc");
4043 if (IS_ERR(host->hpclk_mmc)) {
4044 dev_err(host->dev, "failed to get hpclk_mmc\n");
4046 clk_prepare_enable(host->hpclk_mmc);
4050 host->hclk_mmc= devm_clk_get(host->dev, "hclk_mmc");
4051 if (IS_ERR(host->hclk_mmc)) {
4052 dev_err(host->dev, "failed to get hclk_mmc\n");
4053 ret = PTR_ERR(host->hclk_mmc);
4057 clk_prepare_enable(host->hclk_mmc);
4060 host->clk_mmc = devm_clk_get(host->dev, "clk_mmc");
4061 if (IS_ERR(host->clk_mmc)) {
4062 dev_err(host->dev, "failed to get clk mmc_per\n");
4063 ret = PTR_ERR(host->clk_mmc);
4067 host->bus_hz = host->pdata->bus_hz;
4068 if (!host->bus_hz) {
4069 dev_err(host->dev, "Platform data must supply bus speed\n");
4074 if (host->verid < DW_MMC_240A)
4075 ret = clk_set_rate(host->clk_mmc, host->bus_hz);
4077 //rockchip: fix divider 2 in clksum before controlller
4078 ret = clk_set_rate(host->clk_mmc, host->bus_hz * 2);
4081 dev_err(host->dev, "failed to set clk mmc\n");
4084 clk_prepare_enable(host->clk_mmc);
4086 if (drv_data && drv_data->setup_clock) {
4087 ret = drv_data->setup_clock(host);
4090 "implementation specific clock setup failed\n");
4095 host->quirks = host->pdata->quirks;
4096 host->irq_state = true;
4097 host->set_speed = 0;
4099 host->svi_flags = 0;
4101 spin_lock_init(&host->lock);
4102 spin_lock_init(&host->slock);
4104 INIT_LIST_HEAD(&host->queue);
4106 * Get the host data width - this assumes that HCON has been set with
4107 * the correct values.
4109 i = (mci_readl(host, HCON) >> 7) & 0x7;
4111 host->push_data = dw_mci_push_data16;
4112 host->pull_data = dw_mci_pull_data16;
4114 host->data_shift = 1;
4115 } else if (i == 2) {
4116 host->push_data = dw_mci_push_data64;
4117 host->pull_data = dw_mci_pull_data64;
4119 host->data_shift = 3;
4121 /* Check for a reserved value, and warn if it is */
4123 "HCON reports a reserved host data width!\n"
4124 "Defaulting to 32-bit access.\n");
4125 host->push_data = dw_mci_push_data32;
4126 host->pull_data = dw_mci_pull_data32;
4128 host->data_shift = 2;
4131 /* Reset all blocks */
4132 if (!dw_mci_ctrl_all_reset(host))
4135 init_dma_attrs(&dw_mci_direct_attrs);
4136 dma_set_attr(DMA_ATTR_SKIP_CPU_SYNC, &dw_mci_direct_attrs);
4138 host->dma_ops = host->pdata->dma_ops;
4139 dw_mci_init_dma(host);
4141 /* Clear the interrupts for the host controller */
4142 mci_writel(host, RINTSTS, 0xFFFFFFFF);
4143 mci_writel(host, INTMASK, 0); /* disable all mmc interrupt first */
4145 /* Put in max timeout */
4146 mci_writel(host, TMOUT, 0xFFFFFFFF);
4149 * FIFO threshold settings RxMark = fifo_size / 2 - 1,
4150 * Tx Mark = fifo_size / 2 DMA Size = 8
4152 if (!host->pdata->fifo_depth) {
4154 * Power-on value of RX_WMark is FIFO_DEPTH-1, but this may
4155 * have been overwritten by the bootloader, just like we're
4156 * about to do, so if you know the value for your hardware, you
4157 * should put it in the platform data.
4159 fifo_size = mci_readl(host, FIFOTH);
4160 fifo_size = 1 + ((fifo_size >> 16) & 0xfff);
4162 fifo_size = host->pdata->fifo_depth;
4164 host->fifo_depth = fifo_size;
4166 SDMMC_SET_FIFOTH(0x2, fifo_size / 2 - 1, fifo_size / 2);
4167 mci_writel(host, FIFOTH, host->fifoth_val);
4169 /* disable clock to CIU */
4170 mci_writel(host, CLKENA, 0);
4171 mci_writel(host, CLKSRC, 0);
4173 tasklet_init(&host->tasklet, dw_mci_tasklet_func, (unsigned long)host);
4174 host->card_workqueue = alloc_workqueue("dw-mci-card",
4175 WQ_MEM_RECLAIM | WQ_NON_REENTRANT, 1);
4176 if (!host->card_workqueue) {
4180 INIT_WORK(&host->card_work, dw_mci_work_routine_card);
4181 ret = devm_request_irq(host->dev, host->irq, dw_mci_interrupt,
4182 host->irq_flags, "dw-mci", host);
4186 if (host->pdata->num_slots)
4187 host->num_slots = host->pdata->num_slots;
4189 host->num_slots = ((mci_readl(host, HCON) >> 1) & 0x1F) + 1;
4191 /* We need at least one slot to succeed */
4192 for (i = 0; i < host->num_slots; i++) {
4193 ret = dw_mci_init_slot(host, i);
4195 dev_dbg(host->dev, "slot %d init failed\n", i);
4201 * Enable interrupts for command done, data over, data empty, card det,
4202 * receive ready and error such as transmit, receive timeout, crc error
4204 mci_writel(host, RINTSTS, 0xFFFFFFFF);
4205 regs = SDMMC_INT_CMD_DONE | SDMMC_INT_DATA_OVER | SDMMC_INT_TXDR |
4206 SDMMC_INT_VSI | SDMMC_INT_RXDR | DW_MCI_ERROR_FLAGS;
4207 if (!(host->mmc->restrict_caps & RESTRICT_CARD_TYPE_SDIO) &&
4208 !(host->mmc->restrict_caps & RESTRICT_CARD_TYPE_EMMC))
4209 regs |= SDMMC_INT_CD;
4211 mci_writel(host, INTMASK, regs);
4213 mci_writel(host, CTRL, SDMMC_CTRL_INT_ENABLE); /* Enable mci interrupt */
4215 dev_info(host->dev, "DW MMC controller at irq %d, "
4216 "%d bit host data width, "
4218 host->irq, width, fifo_size);
4221 dev_info(host->dev, "%d slots initialized\n", init_slots);
4223 dev_dbg(host->dev, "attempted to initialize %d slots, "
4224 "but failed on all\n", host->num_slots);
4229 if (host->quirks & DW_MCI_QUIRK_IDMAC_DTO)
4230 dev_info(host->dev, "Internal DMAC interrupt fix enabled.\n");
4235 destroy_workqueue(host->card_workqueue);
4238 if (host->use_dma && host->dma_ops->exit)
4239 host->dma_ops->exit(host);
4242 regulator_disable(host->vmmc);
4243 regulator_put(host->vmmc);
4247 if (!IS_ERR(host->clk_mmc))
4248 clk_disable_unprepare(host->clk_mmc);
4250 if (!IS_ERR(host->hclk_mmc))
4251 clk_disable_unprepare(host->hclk_mmc);
4254 EXPORT_SYMBOL(dw_mci_probe);
4256 void dw_mci_remove(struct dw_mci *host)
4258 struct mmc_host *mmc = host->mmc;
4259 struct dw_mci_slot *slot = mmc_priv(mmc);
4262 mci_writel(host, RINTSTS, 0xFFFFFFFF);
4263 mci_writel(host, INTMASK, 0); /* disable all mmc interrupt first */
4265 for(i = 0; i < host->num_slots; i++){
4266 dev_dbg(host->dev, "remove slot %d\n", i);
4268 dw_mci_cleanup_slot(host->slot[i], i);
4271 /* disable clock to CIU */
4272 mci_writel(host, CLKENA, 0);
4273 mci_writel(host, CLKSRC, 0);
4275 destroy_workqueue(host->card_workqueue);
4276 if (host->mmc->restrict_caps & RESTRICT_CARD_TYPE_SD)
4277 unregister_pm_notifier(&host->mmc->pm_notify);
4279 if (host->use_dma && host->dma_ops->exit)
4280 host->dma_ops->exit(host);
4282 if (gpio_is_valid(slot->cd_gpio))
4283 dw_mci_of_free_cd_gpio_irq(host->dev, slot->cd_gpio, host->mmc);
4286 regulator_disable(host->vmmc);
4287 regulator_put(host->vmmc);
4289 if (!IS_ERR(host->clk_mmc))
4290 clk_disable_unprepare(host->clk_mmc);
4292 if (!IS_ERR(host->hclk_mmc))
4293 clk_disable_unprepare(host->hclk_mmc);
4294 if (!IS_ERR(host->hpclk_mmc))
4295 clk_disable_unprepare(host->hpclk_mmc);
4297 EXPORT_SYMBOL(dw_mci_remove);
4301 #ifdef CONFIG_PM_SLEEP
4303 * TODO: we should probably disable the clock to the card in the suspend path.
4305 extern int get_wifi_chip_type(void);
4306 int dw_mci_suspend(struct dw_mci *host)
4308 int present = dw_mci_get_cd(host->mmc);
4310 if((host->mmc->restrict_caps &
4311 RESTRICT_CARD_TYPE_SDIO) &&
4312 (get_wifi_chip_type() == WIFI_ESP8089 ||
4313 get_wifi_chip_type() > WIFI_AP6XXX_SERIES))
4317 regulator_disable(host->vmmc);
4319 /* Only for sdmmc controller */
4320 if (host->mmc->restrict_caps & RESTRICT_CARD_TYPE_SD) {
4321 disable_irq(host->irq);
4323 if (pinctrl_select_state(host->pinctrl, host->pins_idle) < 0)
4324 MMC_DBG_ERR_FUNC(host->mmc,
4325 "Idle pinctrl setting failed! [%s]",
4326 mmc_hostname(host->mmc));
4329 /* Soc rk3126/3036 already in gpio_cd mode */
4330 if (!soc_is_rk3126() && !soc_is_rk3126b() && !soc_is_rk3036()) {
4331 dw_mci_of_get_cd_gpio(host->dev, 0, host->mmc);
4332 enable_irq_wake(host->mmc->slot.cd_irq);
4336 mci_writel(host, RINTSTS, 0xFFFFFFFF);
4337 mci_writel(host, INTMASK, 0x00);
4338 mci_writel(host, CTRL, 0x00);
4340 if (host->rst_ops &&
4341 host->rst_ops->pre_suspend)
4342 host->rst_ops->pre_suspend(host);
4346 EXPORT_SYMBOL(dw_mci_suspend);
4348 int dw_mci_resume(struct dw_mci *host)
4352 struct dw_mci_slot *slot;
4353 int present = dw_mci_get_cd(host->mmc);
4355 if (host->rst_ops &&
4356 host->rst_ops->post_resume)
4357 host->rst_ops->post_resume(host);
4360 if ((host->mmc->restrict_caps & RESTRICT_CARD_TYPE_SDIO) &&
4361 (get_wifi_chip_type() == WIFI_ESP8089 ||
4362 get_wifi_chip_type() > WIFI_AP6XXX_SERIES))
4365 if (host->mmc->restrict_caps & RESTRICT_CARD_TYPE_SDIO) {
4366 slot = mmc_priv(host->mmc);
4367 if (!test_bit(DW_MMC_CARD_PRESENT, &slot->flags))
4371 /*only for sdmmc controller*/
4372 if (host->mmc->restrict_caps & RESTRICT_CARD_TYPE_SD) {
4373 /* Soc rk3126/3036 already in gpio_cd mode */
4374 if (!soc_is_rk3126() && !soc_is_rk3126b() && !soc_is_rk3036()) {
4375 disable_irq_wake(host->mmc->slot.cd_irq);
4376 mmc_gpio_free_cd(host->mmc);
4380 if (!IS_ERR(host->pins_udbg)) {
4381 if (pinctrl_select_state(host->pinctrl, host->pins_idle) < 0)
4382 MMC_DBG_ERR_FUNC(host->mmc,
4383 "Idle pinctrl setting failed! [%s]",
4384 mmc_hostname(host->mmc));
4385 if (pinctrl_select_state(host->pinctrl, host->pins_udbg) < 0)
4386 MMC_DBG_ERR_FUNC(host->mmc,
4387 "Udbg pinctrl setting failed! [%s]",
4388 mmc_hostname(host->mmc));
4390 if (pinctrl_select_state(host->pinctrl, host->pins_default) < 0)
4391 MMC_DBG_ERR_FUNC(host->mmc,
4392 "Default pinctrl setting failed! [%s]",
4393 mmc_hostname(host->mmc));
4396 if(pinctrl_select_state(host->pinctrl, host->pins_default) < 0)
4397 MMC_DBG_ERR_FUNC(host->mmc,
4398 "Default pinctrl setting failed! [%s]",
4399 mmc_hostname(host->mmc));
4403 if (cpu_is_rk3288())
4404 grf_writel(((1 << 12) << 16) | (0 << 12), RK3288_GRF_SOC_CON0);
4405 else if (cpu_is_rk3036())
4406 grf_writel(((1 << 11) << 16) | (0 << 11), RK3036_GRF_SOC_CON0);
4407 else if (cpu_is_rk312x())
4408 /* RK3036_GRF_SOC_CON0 is compatible with rk312x, tmp setting */
4409 grf_writel(((1 << 8) << 16) | (0 << 8), RK3036_GRF_SOC_CON0);
4412 ret = regulator_enable(host->vmmc);
4415 "failed to enable regulator: %d\n", ret);
4420 if (!dw_mci_ctrl_all_reset(host)){
4425 if (!(cpu_is_rk3036() || cpu_is_rk312x()))
4426 if(host->use_dma && host->dma_ops->init)
4427 host->dma_ops->init(host);
4430 * Restore the initial value at FIFOTH register
4431 * And Invalidate the prev_blksz with zero
4433 mci_writel(host, FIFOTH, host->fifoth_val);
4434 host->prev_blksz = 0;
4435 /* Put in max timeout */
4436 mci_writel(host, TMOUT, 0xFFFFFFFF);
4438 mci_writel(host, RINTSTS, 0xFFFFFFFF);
4439 regs = SDMMC_INT_CMD_DONE | SDMMC_INT_DATA_OVER | SDMMC_INT_TXDR |
4440 SDMMC_INT_RXDR | SDMMC_INT_VSI | DW_MCI_ERROR_FLAGS;
4442 if (!(host->mmc->restrict_caps & RESTRICT_CARD_TYPE_SDIO))
4443 regs |= SDMMC_INT_CD;
4445 mci_writel(host, INTMASK, regs);
4446 mci_writel(host, CTRL, SDMMC_CTRL_INT_ENABLE);
4448 /* Only for sdmmc controller */
4449 if ((host->mmc->restrict_caps & RESTRICT_CARD_TYPE_SD))
4450 enable_irq(host->irq);
4452 for (i = 0; i < host->num_slots; i++){
4453 struct dw_mci_slot *slot = host->slot[i];
4456 if (slot->mmc->pm_flags & MMC_PM_KEEP_POWER){
4457 dw_mci_set_ios(slot->mmc, &slot->mmc->ios);
4458 dw_mci_setup_bus(slot, true);
4464 EXPORT_SYMBOL(dw_mci_resume);
4465 #endif /* CONFIG_PM_SLEEP */
4467 static int __init dw_mci_init(void)
4469 pr_info("Synopsys Designware Multimedia Card Interface Driver\n");
4470 pr_info("MHSC version = %s\n", RK_SDMMC_DRIVER_VERSION);
4474 static void __exit dw_mci_exit(void)
4478 module_init(dw_mci_init);
4479 module_exit(dw_mci_exit);
4481 MODULE_DESCRIPTION("Rockchip specific DW Multimedia Card Interface driver");
4482 MODULE_AUTHOR("Shawn Lin <lintao@rock-chips.com>");
4483 MODULE_LICENSE("GPL v2");