2 * linux/drivers/mmc/host/sdhci.h - Secure Digital Host Controller Interface driver
4 * Header file for Host Controller registers and I/O accessors.
6 * Copyright (C) 2005-2008 Pierre Ossman, All Rights Reserved.
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License as published by
10 * the Free Software Foundation; either version 2 of the License, or (at
11 * your option) any later version.
16 #include <linux/scatterlist.h>
17 #include <linux/compiler.h>
18 #include <linux/types.h>
21 #include <linux/mmc/host.h>
24 * Controller registers
27 #define SDHCI_DMA_ADDRESS 0x00
28 #define SDHCI_ARGUMENT2 SDHCI_DMA_ADDRESS
30 #define SDHCI_BLOCK_SIZE 0x04
31 #define SDHCI_MAKE_BLKSZ(dma, blksz) (((dma & 0x7) << 12) | (blksz & 0xFFF))
33 #define SDHCI_BLOCK_COUNT 0x06
35 #define SDHCI_ARGUMENT 0x08
37 #define SDHCI_TRANSFER_MODE 0x0C
38 #define SDHCI_TRNS_DMA 0x01
39 #define SDHCI_TRNS_BLK_CNT_EN 0x02
40 #define SDHCI_TRNS_AUTO_CMD12 0x04
41 #define SDHCI_TRNS_AUTO_CMD23 0x08
42 #define SDHCI_TRNS_READ 0x10
43 #define SDHCI_TRNS_MULTI 0x20
45 #define SDHCI_COMMAND 0x0E
46 #define SDHCI_CMD_RESP_MASK 0x03
47 #define SDHCI_CMD_CRC 0x08
48 #define SDHCI_CMD_INDEX 0x10
49 #define SDHCI_CMD_DATA 0x20
50 #define SDHCI_CMD_ABORTCMD 0xC0
52 #define SDHCI_CMD_RESP_NONE 0x00
53 #define SDHCI_CMD_RESP_LONG 0x01
54 #define SDHCI_CMD_RESP_SHORT 0x02
55 #define SDHCI_CMD_RESP_SHORT_BUSY 0x03
57 #define SDHCI_MAKE_CMD(c, f) (((c & 0xff) << 8) | (f & 0xff))
58 #define SDHCI_GET_CMD(c) ((c>>8) & 0x3f)
60 #define SDHCI_RESPONSE 0x10
62 #define SDHCI_BUFFER 0x20
64 #define SDHCI_PRESENT_STATE 0x24
65 #define SDHCI_CMD_INHIBIT 0x00000001
66 #define SDHCI_DATA_INHIBIT 0x00000002
67 #define SDHCI_DOING_WRITE 0x00000100
68 #define SDHCI_DOING_READ 0x00000200
69 #define SDHCI_SPACE_AVAILABLE 0x00000400
70 #define SDHCI_DATA_AVAILABLE 0x00000800
71 #define SDHCI_CARD_PRESENT 0x00010000
72 #define SDHCI_WRITE_PROTECT 0x00080000
73 #define SDHCI_DATA_LVL_MASK 0x00F00000
74 #define SDHCI_DATA_LVL_SHIFT 20
75 #define SDHCI_DATA_0_LVL_MASK 0x00100000
77 #define SDHCI_HOST_CONTROL 0x28
78 #define SDHCI_CTRL_LED 0x01
79 #define SDHCI_CTRL_4BITBUS 0x02
80 #define SDHCI_CTRL_HISPD 0x04
81 #define SDHCI_CTRL_DMA_MASK 0x18
82 #define SDHCI_CTRL_SDMA 0x00
83 #define SDHCI_CTRL_ADMA1 0x08
84 #define SDHCI_CTRL_ADMA32 0x10
85 #define SDHCI_CTRL_ADMA64 0x18
86 #define SDHCI_CTRL_8BITBUS 0x20
88 #define SDHCI_POWER_CONTROL 0x29
89 #define SDHCI_POWER_ON 0x01
90 #define SDHCI_POWER_180 0x0A
91 #define SDHCI_POWER_300 0x0C
92 #define SDHCI_POWER_330 0x0E
94 #define SDHCI_BLOCK_GAP_CONTROL 0x2A
96 #define SDHCI_WAKE_UP_CONTROL 0x2B
97 #define SDHCI_WAKE_ON_INT 0x01
98 #define SDHCI_WAKE_ON_INSERT 0x02
99 #define SDHCI_WAKE_ON_REMOVE 0x04
101 #define SDHCI_CLOCK_CONTROL 0x2C
102 #define SDHCI_DIVIDER_SHIFT 8
103 #define SDHCI_DIVIDER_HI_SHIFT 6
104 #define SDHCI_DIV_MASK 0xFF
105 #define SDHCI_DIV_MASK_LEN 8
106 #define SDHCI_DIV_HI_MASK 0x300
107 #define SDHCI_PROG_CLOCK_MODE 0x0020
108 #define SDHCI_CLOCK_CARD_EN 0x0004
109 #define SDHCI_CLOCK_INT_STABLE 0x0002
110 #define SDHCI_CLOCK_INT_EN 0x0001
112 #define SDHCI_TIMEOUT_CONTROL 0x2E
114 #define SDHCI_SOFTWARE_RESET 0x2F
115 #define SDHCI_RESET_ALL 0x01
116 #define SDHCI_RESET_CMD 0x02
117 #define SDHCI_RESET_DATA 0x04
119 #define SDHCI_INT_STATUS 0x30
120 #define SDHCI_INT_ENABLE 0x34
121 #define SDHCI_SIGNAL_ENABLE 0x38
122 #define SDHCI_INT_RESPONSE 0x00000001
123 #define SDHCI_INT_DATA_END 0x00000002
124 #define SDHCI_INT_BLK_GAP 0x00000004
125 #define SDHCI_INT_DMA_END 0x00000008
126 #define SDHCI_INT_SPACE_AVAIL 0x00000010
127 #define SDHCI_INT_DATA_AVAIL 0x00000020
128 #define SDHCI_INT_CARD_INSERT 0x00000040
129 #define SDHCI_INT_CARD_REMOVE 0x00000080
130 #define SDHCI_INT_CARD_INT 0x00000100
131 #define SDHCI_INT_ERROR 0x00008000
132 #define SDHCI_INT_TIMEOUT 0x00010000
133 #define SDHCI_INT_CRC 0x00020000
134 #define SDHCI_INT_END_BIT 0x00040000
135 #define SDHCI_INT_INDEX 0x00080000
136 #define SDHCI_INT_DATA_TIMEOUT 0x00100000
137 #define SDHCI_INT_DATA_CRC 0x00200000
138 #define SDHCI_INT_DATA_END_BIT 0x00400000
139 #define SDHCI_INT_BUS_POWER 0x00800000
140 #define SDHCI_INT_ACMD12ERR 0x01000000
141 #define SDHCI_INT_ADMA_ERROR 0x02000000
143 #define SDHCI_INT_NORMAL_MASK 0x00007FFF
144 #define SDHCI_INT_ERROR_MASK 0xFFFF8000
146 #define SDHCI_INT_CMD_MASK (SDHCI_INT_RESPONSE | SDHCI_INT_TIMEOUT | \
147 SDHCI_INT_CRC | SDHCI_INT_END_BIT | SDHCI_INT_INDEX)
148 #define SDHCI_INT_DATA_MASK (SDHCI_INT_DATA_END | SDHCI_INT_DMA_END | \
149 SDHCI_INT_DATA_AVAIL | SDHCI_INT_SPACE_AVAIL | \
150 SDHCI_INT_DATA_TIMEOUT | SDHCI_INT_DATA_CRC | \
151 SDHCI_INT_DATA_END_BIT | SDHCI_INT_ADMA_ERROR | \
153 #define SDHCI_INT_ALL_MASK ((unsigned int)-1)
155 #define SDHCI_ACMD12_ERR 0x3C
157 #define SDHCI_HOST_CONTROL2 0x3E
158 #define SDHCI_CTRL_UHS_MASK 0x0007
159 #define SDHCI_CTRL_UHS_SDR12 0x0000
160 #define SDHCI_CTRL_UHS_SDR25 0x0001
161 #define SDHCI_CTRL_UHS_SDR50 0x0002
162 #define SDHCI_CTRL_UHS_SDR104 0x0003
163 #define SDHCI_CTRL_UHS_DDR50 0x0004
164 #define SDHCI_CTRL_HS400 0x0005 /* Non-standard */
165 #define SDHCI_CTRL_VDD_180 0x0008
166 #define SDHCI_CTRL_DRV_TYPE_MASK 0x0030
167 #define SDHCI_CTRL_DRV_TYPE_B 0x0000
168 #define SDHCI_CTRL_DRV_TYPE_A 0x0010
169 #define SDHCI_CTRL_DRV_TYPE_C 0x0020
170 #define SDHCI_CTRL_DRV_TYPE_D 0x0030
171 #define SDHCI_CTRL_EXEC_TUNING 0x0040
172 #define SDHCI_CTRL_TUNED_CLK 0x0080
173 #define SDHCI_CTRL_PRESET_VAL_ENABLE 0x8000
175 #define SDHCI_CAPABILITIES 0x40
176 #define SDHCI_TIMEOUT_CLK_MASK 0x0000003F
177 #define SDHCI_TIMEOUT_CLK_SHIFT 0
178 #define SDHCI_TIMEOUT_CLK_UNIT 0x00000080
179 #define SDHCI_CLOCK_BASE_MASK 0x00003F00
180 #define SDHCI_CLOCK_V3_BASE_MASK 0x0000FF00
181 #define SDHCI_CLOCK_BASE_SHIFT 8
182 #define SDHCI_MAX_BLOCK_MASK 0x00030000
183 #define SDHCI_MAX_BLOCK_SHIFT 16
184 #define SDHCI_CAN_DO_8BIT 0x00040000
185 #define SDHCI_CAN_DO_ADMA2 0x00080000
186 #define SDHCI_CAN_DO_ADMA1 0x00100000
187 #define SDHCI_CAN_DO_HISPD 0x00200000
188 #define SDHCI_CAN_DO_SDMA 0x00400000
189 #define SDHCI_CAN_VDD_330 0x01000000
190 #define SDHCI_CAN_VDD_300 0x02000000
191 #define SDHCI_CAN_VDD_180 0x04000000
192 #define SDHCI_CAN_64BIT 0x10000000
194 #define SDHCI_SUPPORT_SDR50 0x00000001
195 #define SDHCI_SUPPORT_SDR104 0x00000002
196 #define SDHCI_SUPPORT_DDR50 0x00000004
197 #define SDHCI_DRIVER_TYPE_A 0x00000010
198 #define SDHCI_DRIVER_TYPE_C 0x00000020
199 #define SDHCI_DRIVER_TYPE_D 0x00000040
200 #define SDHCI_RETUNING_TIMER_COUNT_MASK 0x00000F00
201 #define SDHCI_RETUNING_TIMER_COUNT_SHIFT 8
202 #define SDHCI_USE_SDR50_TUNING 0x00002000
203 #define SDHCI_RETUNING_MODE_MASK 0x0000C000
204 #define SDHCI_RETUNING_MODE_SHIFT 14
205 #define SDHCI_CLOCK_MUL_MASK 0x00FF0000
206 #define SDHCI_CLOCK_MUL_SHIFT 16
207 #define SDHCI_SUPPORT_HS400 0x80000000 /* Non-standard */
209 #define SDHCI_CAPABILITIES_1 0x44
211 #define SDHCI_MAX_CURRENT 0x48
212 #define SDHCI_MAX_CURRENT_LIMIT 0xFF
213 #define SDHCI_MAX_CURRENT_330_MASK 0x0000FF
214 #define SDHCI_MAX_CURRENT_330_SHIFT 0
215 #define SDHCI_MAX_CURRENT_300_MASK 0x00FF00
216 #define SDHCI_MAX_CURRENT_300_SHIFT 8
217 #define SDHCI_MAX_CURRENT_180_MASK 0xFF0000
218 #define SDHCI_MAX_CURRENT_180_SHIFT 16
219 #define SDHCI_MAX_CURRENT_MULTIPLIER 4
221 /* 4C-4F reserved for more max current */
223 #define SDHCI_SET_ACMD12_ERROR 0x50
224 #define SDHCI_SET_INT_ERROR 0x52
226 #define SDHCI_ADMA_ERROR 0x54
230 #define SDHCI_ADMA_ADDRESS 0x58
231 #define SDHCI_ADMA_ADDRESS_HI 0x5C
235 #define SDHCI_PRESET_FOR_SDR12 0x66
236 #define SDHCI_PRESET_FOR_SDR25 0x68
237 #define SDHCI_PRESET_FOR_SDR50 0x6A
238 #define SDHCI_PRESET_FOR_SDR104 0x6C
239 #define SDHCI_PRESET_FOR_DDR50 0x6E
240 #define SDHCI_PRESET_FOR_HS400 0x74 /* Non-standard */
241 #define SDHCI_PRESET_DRV_MASK 0xC000
242 #define SDHCI_PRESET_DRV_SHIFT 14
243 #define SDHCI_PRESET_CLKGEN_SEL_MASK 0x400
244 #define SDHCI_PRESET_CLKGEN_SEL_SHIFT 10
245 #define SDHCI_PRESET_SDCLK_FREQ_MASK 0x3FF
246 #define SDHCI_PRESET_SDCLK_FREQ_SHIFT 0
248 #define SDHCI_SLOT_INT_STATUS 0xFC
250 #define SDHCI_HOST_VERSION 0xFE
251 #define SDHCI_VENDOR_VER_MASK 0xFF00
252 #define SDHCI_VENDOR_VER_SHIFT 8
253 #define SDHCI_SPEC_VER_MASK 0x00FF
254 #define SDHCI_SPEC_VER_SHIFT 0
255 #define SDHCI_SPEC_100 0
256 #define SDHCI_SPEC_200 1
257 #define SDHCI_SPEC_300 2
260 * End of controller registers.
263 #define SDHCI_MAX_DIV_SPEC_200 256
264 #define SDHCI_MAX_DIV_SPEC_300 2046
267 * Host SDMA buffer boundary. Valid values from 4K to 512K in powers of 2.
269 #define SDHCI_DEFAULT_BOUNDARY_SIZE (512 * 1024)
270 #define SDHCI_DEFAULT_BOUNDARY_ARG (ilog2(SDHCI_DEFAULT_BOUNDARY_SIZE) - 12)
272 /* ADMA2 32-bit DMA descriptor size */
273 #define SDHCI_ADMA2_32_DESC_SZ 8
275 /* ADMA2 32-bit DMA alignment */
276 #define SDHCI_ADMA2_32_ALIGN 4
278 /* ADMA2 32-bit descriptor */
279 struct sdhci_adma2_32_desc {
283 } __packed __aligned(SDHCI_ADMA2_32_ALIGN);
285 /* ADMA2 64-bit DMA descriptor size */
286 #define SDHCI_ADMA2_64_DESC_SZ 12
288 /* ADMA2 64-bit DMA alignment */
289 #define SDHCI_ADMA2_64_ALIGN 8
292 * ADMA2 64-bit descriptor. Note 12-byte descriptor can't always be 8-byte
295 struct sdhci_adma2_64_desc {
300 } __packed __aligned(4);
302 #define ADMA2_TRAN_VALID 0x21
303 #define ADMA2_NOP_END_VALID 0x3
304 #define ADMA2_END 0x2
307 * Maximum segments assuming a 512KiB maximum requisition size and a minimum
310 #define SDHCI_MAX_SEGS 128
312 struct sdhci_host_next {
313 unsigned int sg_count;
318 /* Data set by hardware interface driver */
319 const char *hw_name; /* Hardware bus name */
321 unsigned int quirks; /* Deviations from spec. */
323 /* Controller doesn't honor resets unless we touch the clock register */
324 #define SDHCI_QUIRK_CLOCK_BEFORE_RESET (1<<0)
325 /* Controller has bad caps bits, but really supports DMA */
326 #define SDHCI_QUIRK_FORCE_DMA (1<<1)
327 /* Controller doesn't like to be reset when there is no card inserted. */
328 #define SDHCI_QUIRK_NO_CARD_NO_RESET (1<<2)
329 /* Controller doesn't like clearing the power reg before a change */
330 #define SDHCI_QUIRK_SINGLE_POWER_WRITE (1<<3)
331 /* Controller has flaky internal state so reset it on each ios change */
332 #define SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS (1<<4)
333 /* Controller has an unusable DMA engine */
334 #define SDHCI_QUIRK_BROKEN_DMA (1<<5)
335 /* Controller has an unusable ADMA engine */
336 #define SDHCI_QUIRK_BROKEN_ADMA (1<<6)
337 /* Controller can only DMA from 32-bit aligned addresses */
338 #define SDHCI_QUIRK_32BIT_DMA_ADDR (1<<7)
339 /* Controller can only DMA chunk sizes that are a multiple of 32 bits */
340 #define SDHCI_QUIRK_32BIT_DMA_SIZE (1<<8)
341 /* Controller can only ADMA chunks that are a multiple of 32 bits */
342 #define SDHCI_QUIRK_32BIT_ADMA_SIZE (1<<9)
343 /* Controller needs to be reset after each request to stay stable */
344 #define SDHCI_QUIRK_RESET_AFTER_REQUEST (1<<10)
345 /* Controller needs voltage and power writes to happen separately */
346 #define SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER (1<<11)
347 /* Controller provides an incorrect timeout value for transfers */
348 #define SDHCI_QUIRK_BROKEN_TIMEOUT_VAL (1<<12)
349 /* Controller has an issue with buffer bits for small transfers */
350 #define SDHCI_QUIRK_BROKEN_SMALL_PIO (1<<13)
351 /* Controller does not provide transfer-complete interrupt when not busy */
352 #define SDHCI_QUIRK_NO_BUSY_IRQ (1<<14)
353 /* Controller has unreliable card detection */
354 #define SDHCI_QUIRK_BROKEN_CARD_DETECTION (1<<15)
355 /* Controller reports inverted write-protect state */
356 #define SDHCI_QUIRK_INVERTED_WRITE_PROTECT (1<<16)
357 /* Controller does not like fast PIO transfers */
358 #define SDHCI_QUIRK_PIO_NEEDS_DELAY (1<<18)
359 /* Controller has to be forced to use block size of 2048 bytes */
360 #define SDHCI_QUIRK_FORCE_BLK_SZ_2048 (1<<20)
361 /* Controller cannot do multi-block transfers */
362 #define SDHCI_QUIRK_NO_MULTIBLOCK (1<<21)
363 /* Controller can only handle 1-bit data transfers */
364 #define SDHCI_QUIRK_FORCE_1_BIT_DATA (1<<22)
365 /* Controller needs 10ms delay between applying power and clock */
366 #define SDHCI_QUIRK_DELAY_AFTER_POWER (1<<23)
367 /* Controller uses SDCLK instead of TMCLK for data timeouts */
368 #define SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK (1<<24)
369 /* Controller reports wrong base clock capability */
370 #define SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN (1<<25)
371 /* Controller cannot support End Attribute in NOP ADMA descriptor */
372 #define SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC (1<<26)
373 /* Controller is missing device caps. Use caps provided by host */
374 #define SDHCI_QUIRK_MISSING_CAPS (1<<27)
375 /* Controller uses Auto CMD12 command to stop the transfer */
376 #define SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12 (1<<28)
377 /* Controller doesn't have HISPD bit field in HI-SPEED SD card */
378 #define SDHCI_QUIRK_NO_HISPD_BIT (1<<29)
379 /* Controller treats ADMA descriptors with length 0000h incorrectly */
380 #define SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC (1<<30)
381 /* The read-only detection via SDHCI_PRESENT_STATE register is unstable */
382 #define SDHCI_QUIRK_UNSTABLE_RO_DETECT (1<<31)
384 unsigned int quirks2; /* More deviations from spec. */
386 #define SDHCI_QUIRK2_HOST_OFF_CARD_ON (1<<0)
387 #define SDHCI_QUIRK2_HOST_NO_CMD23 (1<<1)
388 /* The system physically doesn't support 1.8v, even if the host does */
389 #define SDHCI_QUIRK2_NO_1_8_V (1<<2)
390 #define SDHCI_QUIRK2_PRESET_VALUE_BROKEN (1<<3)
391 #define SDHCI_QUIRK2_CARD_ON_NEEDS_BUS_ON (1<<4)
392 /* Controller has a non-standard host control register */
393 #define SDHCI_QUIRK2_BROKEN_HOST_CONTROL (1<<5)
394 /* Controller does not support HS200 */
395 #define SDHCI_QUIRK2_BROKEN_HS200 (1<<6)
396 /* Controller does not support DDR50 */
397 #define SDHCI_QUIRK2_BROKEN_DDR50 (1<<7)
398 /* Stop command (CMD12) can set Transfer Complete when not using MMC_RSP_BUSY */
399 #define SDHCI_QUIRK2_STOP_WITH_TC (1<<8)
400 /* Controller does not support 64-bit DMA */
401 #define SDHCI_QUIRK2_BROKEN_64_BIT_DMA (1<<9)
402 /* need clear transfer mode register before send cmd */
403 #define SDHCI_QUIRK2_CLEAR_TRANSFERMODE_REG_BEFORE_CMD (1<<10)
404 /* Capability register bit-63 indicates HS400 support */
405 #define SDHCI_QUIRK2_CAPS_BIT63_FOR_HS400 (1<<11)
406 /* forced tuned clock */
407 #define SDHCI_QUIRK2_TUNING_WORK_AROUND (1<<12)
408 /* disable the block count for single block transactions */
409 #define SDHCI_QUIRK2_SUPPORT_SINGLE (1<<13)
410 /* Controller broken with using ACMD23 */
411 #define SDHCI_QUIRK2_ACMD23_BROKEN (1<<14)
413 int irq; /* Device IRQ */
414 void __iomem *ioaddr; /* Mapped address */
416 const struct sdhci_ops *ops; /* Low level hw interface */
419 struct mmc_host *mmc; /* MMC structure */
420 u64 dma_mask; /* custom DMA mask */
422 #if defined(CONFIG_LEDS_CLASS) || defined(CONFIG_LEDS_CLASS_MODULE)
423 struct led_classdev led; /* LED control */
427 spinlock_t lock; /* Mutex */
429 int flags; /* Host attributes */
430 #define SDHCI_USE_SDMA (1<<0) /* Host is SDMA capable */
431 #define SDHCI_USE_ADMA (1<<1) /* Host is ADMA capable */
432 #define SDHCI_REQ_USE_DMA (1<<2) /* Use DMA for this req. */
433 #define SDHCI_DEVICE_DEAD (1<<3) /* Device unresponsive */
434 #define SDHCI_SDR50_NEEDS_TUNING (1<<4) /* SDR50 needs tuning */
435 #define SDHCI_NEEDS_RETUNING (1<<5) /* Host needs retuning */
436 #define SDHCI_AUTO_CMD12 (1<<6) /* Auto CMD12 support */
437 #define SDHCI_AUTO_CMD23 (1<<7) /* Auto CMD23 support */
438 #define SDHCI_PV_ENABLED (1<<8) /* Preset value enabled */
439 #define SDHCI_SDIO_IRQ_ENABLED (1<<9) /* SDIO irq enabled */
440 #define SDHCI_SDR104_NEEDS_TUNING (1<<10) /* SDR104/HS200 needs tuning */
441 #define SDHCI_USING_RETUNING_TIMER (1<<11) /* Host is using a retuning timer for the card */
442 #define SDHCI_USE_64_BIT_DMA (1<<12) /* Use 64-bit DMA */
443 #define SDHCI_HS400_TUNING (1<<13) /* Tuning for HS400 */
445 unsigned int version; /* SDHCI spec. version */
447 unsigned int max_clk; /* Max possible freq (MHz) */
448 unsigned int timeout_clk; /* Timeout freq (KHz) */
449 unsigned int clk_mul; /* Clock Muliplier value */
451 unsigned int clock; /* Current clock (MHz) */
452 u8 pwr; /* Current voltage */
454 bool runtime_suspended; /* Host is runtime suspended */
455 bool bus_on; /* Bus power prevents runtime suspend */
456 bool preset_enabled; /* Preset is enabled */
458 struct mmc_request *mrq; /* Current request */
459 struct mmc_command *cmd; /* Current command */
460 struct mmc_data *data; /* Current data request */
461 unsigned int data_early:1; /* Data finished before cmd */
462 unsigned int busy_handle:1; /* Handling the order of Busy-end */
464 struct sg_mapping_iter sg_miter; /* SG state for PIO */
465 unsigned int blocks; /* remaining PIO blocks */
467 int sg_count; /* Mapped sg entries */
469 void *adma_table; /* ADMA descriptor table */
470 void *align_buffer; /* Bounce buffer */
472 size_t adma_table_sz; /* ADMA descriptor table size */
473 size_t align_buffer_sz; /* Bounce buffer size */
475 dma_addr_t adma_addr; /* Mapped ADMA descr. table */
476 dma_addr_t align_addr; /* Mapped bounce buffer */
478 unsigned int desc_sz; /* ADMA descriptor size */
479 unsigned int align_sz; /* ADMA alignment */
480 unsigned int align_mask; /* ADMA alignment mask */
482 struct tasklet_struct finish_tasklet; /* Tasklet structures */
484 struct timer_list timer; /* Timer for timeouts */
486 u32 caps; /* Alternative CAPABILITY_0 */
487 u32 caps1; /* Alternative CAPABILITY_1 */
489 unsigned int ocr_avail_sdio; /* OCR bit masks */
490 unsigned int ocr_avail_sd;
491 unsigned int ocr_avail_mmc;
492 u32 ocr_mask; /* available voltages */
494 unsigned timing; /* Current timing */
498 /* cached registers */
501 wait_queue_head_t buf_ready_int; /* Waitqueue for Buffer Read Ready interrupt */
502 unsigned int tuning_done; /* Condition flag set when CMD19 succeeds */
504 unsigned int tuning_count; /* Timer count for re-tuning */
505 unsigned int tuning_mode; /* Re-tuning mode supported by host */
506 #define SDHCI_TUNING_MODE_1 0
507 struct timer_list tuning_timer; /* Timer for tuning */
509 struct sdhci_host_next next_data;
510 unsigned long private[0] ____cacheline_aligned;
514 #ifdef CONFIG_MMC_SDHCI_IO_ACCESSORS
515 u32 (*read_l)(struct sdhci_host *host, int reg);
516 u16 (*read_w)(struct sdhci_host *host, int reg);
517 u8 (*read_b)(struct sdhci_host *host, int reg);
518 void (*write_l)(struct sdhci_host *host, u32 val, int reg);
519 void (*write_w)(struct sdhci_host *host, u16 val, int reg);
520 void (*write_b)(struct sdhci_host *host, u8 val, int reg);
523 void (*set_clock)(struct sdhci_host *host, unsigned int clock);
525 int (*enable_dma)(struct sdhci_host *host);
526 unsigned int (*get_max_clock)(struct sdhci_host *host);
527 unsigned int (*get_min_clock)(struct sdhci_host *host);
528 unsigned int (*get_timeout_clock)(struct sdhci_host *host);
529 unsigned int (*get_max_timeout_count)(struct sdhci_host *host);
530 void (*set_timeout)(struct sdhci_host *host,
531 struct mmc_command *cmd);
532 void (*set_bus_width)(struct sdhci_host *host, int width);
533 void (*platform_send_init_74_clocks)(struct sdhci_host *host,
535 unsigned int (*get_ro)(struct sdhci_host *host);
536 void (*reset)(struct sdhci_host *host, u8 mask);
537 int (*platform_execute_tuning)(struct sdhci_host *host, u32 opcode);
538 void (*set_uhs_signaling)(struct sdhci_host *host, unsigned int uhs);
539 void (*hw_reset)(struct sdhci_host *host);
540 void (*adma_workaround)(struct sdhci_host *host, u32 intmask);
541 void (*platform_init)(struct sdhci_host *host);
542 void (*card_event)(struct sdhci_host *host);
543 void (*voltage_switch)(struct sdhci_host *host);
546 #ifdef CONFIG_MMC_SDHCI_IO_ACCESSORS
548 static inline void sdhci_writel(struct sdhci_host *host, u32 val, int reg)
550 if (unlikely(host->ops->write_l))
551 host->ops->write_l(host, val, reg);
553 writel(val, host->ioaddr + reg);
556 static inline void sdhci_writew(struct sdhci_host *host, u16 val, int reg)
558 if (unlikely(host->ops->write_w))
559 host->ops->write_w(host, val, reg);
561 writew(val, host->ioaddr + reg);
564 static inline void sdhci_writeb(struct sdhci_host *host, u8 val, int reg)
566 if (unlikely(host->ops->write_b))
567 host->ops->write_b(host, val, reg);
569 writeb(val, host->ioaddr + reg);
572 static inline u32 sdhci_readl(struct sdhci_host *host, int reg)
574 if (unlikely(host->ops->read_l))
575 return host->ops->read_l(host, reg);
577 return readl(host->ioaddr + reg);
580 static inline u16 sdhci_readw(struct sdhci_host *host, int reg)
582 if (unlikely(host->ops->read_w))
583 return host->ops->read_w(host, reg);
585 return readw(host->ioaddr + reg);
588 static inline u8 sdhci_readb(struct sdhci_host *host, int reg)
590 if (unlikely(host->ops->read_b))
591 return host->ops->read_b(host, reg);
593 return readb(host->ioaddr + reg);
598 static inline void sdhci_writel(struct sdhci_host *host, u32 val, int reg)
600 writel(val, host->ioaddr + reg);
603 static inline void sdhci_writew(struct sdhci_host *host, u16 val, int reg)
605 writew(val, host->ioaddr + reg);
608 static inline void sdhci_writeb(struct sdhci_host *host, u8 val, int reg)
610 writeb(val, host->ioaddr + reg);
613 static inline u32 sdhci_readl(struct sdhci_host *host, int reg)
615 return readl(host->ioaddr + reg);
618 static inline u16 sdhci_readw(struct sdhci_host *host, int reg)
620 return readw(host->ioaddr + reg);
623 static inline u8 sdhci_readb(struct sdhci_host *host, int reg)
625 return readb(host->ioaddr + reg);
628 #endif /* CONFIG_MMC_SDHCI_IO_ACCESSORS */
630 extern struct sdhci_host *sdhci_alloc_host(struct device *dev,
632 extern void sdhci_free_host(struct sdhci_host *host);
634 static inline void *sdhci_priv(struct sdhci_host *host)
636 return (void *)host->private;
639 extern void sdhci_card_detect(struct sdhci_host *host);
640 extern int sdhci_add_host(struct sdhci_host *host);
641 extern void sdhci_remove_host(struct sdhci_host *host, int dead);
642 extern void sdhci_send_command(struct sdhci_host *host,
643 struct mmc_command *cmd);
645 static inline bool sdhci_sdio_irq_enabled(struct sdhci_host *host)
647 return !!(host->flags & SDHCI_SDIO_IRQ_ENABLED);
650 void sdhci_set_clock(struct sdhci_host *host, unsigned int clock);
651 void sdhci_set_bus_width(struct sdhci_host *host, int width);
652 void sdhci_reset(struct sdhci_host *host, u8 mask);
653 void sdhci_set_uhs_signaling(struct sdhci_host *host, unsigned timing);
656 extern int sdhci_suspend_host(struct sdhci_host *host);
657 extern int sdhci_resume_host(struct sdhci_host *host);
658 extern void sdhci_enable_irq_wakeups(struct sdhci_host *host);
659 extern int sdhci_runtime_suspend_host(struct sdhci_host *host);
660 extern int sdhci_runtime_resume_host(struct sdhci_host *host);
663 #endif /* __SDHCI_HW_H */