2 * NAND flash simulator.
4 * Author: Artem B. Bityuckiy <dedekind@oktetlabs.ru>, <dedekind@infradead.org>
6 * Copyright (C) 2004 Nokia Corporation
8 * Note: NS means "NAND Simulator".
9 * Note: Input means input TO flash chip, output means output FROM chip.
11 * This program is free software; you can redistribute it and/or modify it
12 * under the terms of the GNU General Public License as published by the
13 * Free Software Foundation; either version 2, or (at your option) any later
16 * This program is distributed in the hope that it will be useful, but
17 * WITHOUT ANY WARRANTY; without even the implied warranty of
18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
19 * Public License for more details.
21 * You should have received a copy of the GNU General Public License
22 * along with this program; if not, write to the Free Software
23 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA
26 #include <linux/init.h>
27 #include <linux/types.h>
28 #include <linux/module.h>
29 #include <linux/moduleparam.h>
30 #include <linux/vmalloc.h>
31 #include <linux/math64.h>
32 #include <linux/slab.h>
33 #include <linux/errno.h>
34 #include <linux/string.h>
35 #include <linux/mtd/mtd.h>
36 #include <linux/mtd/nand.h>
37 #include <linux/mtd/nand_bch.h>
38 #include <linux/mtd/partitions.h>
39 #include <linux/delay.h>
40 #include <linux/list.h>
41 #include <linux/random.h>
42 #include <linux/sched.h>
44 #include <linux/pagemap.h>
46 /* Default simulator parameters values */
47 #if !defined(CONFIG_NANDSIM_FIRST_ID_BYTE) || \
48 !defined(CONFIG_NANDSIM_SECOND_ID_BYTE) || \
49 !defined(CONFIG_NANDSIM_THIRD_ID_BYTE) || \
50 !defined(CONFIG_NANDSIM_FOURTH_ID_BYTE)
51 #define CONFIG_NANDSIM_FIRST_ID_BYTE 0x98
52 #define CONFIG_NANDSIM_SECOND_ID_BYTE 0x39
53 #define CONFIG_NANDSIM_THIRD_ID_BYTE 0xFF /* No byte */
54 #define CONFIG_NANDSIM_FOURTH_ID_BYTE 0xFF /* No byte */
57 #ifndef CONFIG_NANDSIM_ACCESS_DELAY
58 #define CONFIG_NANDSIM_ACCESS_DELAY 25
60 #ifndef CONFIG_NANDSIM_PROGRAMM_DELAY
61 #define CONFIG_NANDSIM_PROGRAMM_DELAY 200
63 #ifndef CONFIG_NANDSIM_ERASE_DELAY
64 #define CONFIG_NANDSIM_ERASE_DELAY 2
66 #ifndef CONFIG_NANDSIM_OUTPUT_CYCLE
67 #define CONFIG_NANDSIM_OUTPUT_CYCLE 40
69 #ifndef CONFIG_NANDSIM_INPUT_CYCLE
70 #define CONFIG_NANDSIM_INPUT_CYCLE 50
72 #ifndef CONFIG_NANDSIM_BUS_WIDTH
73 #define CONFIG_NANDSIM_BUS_WIDTH 8
75 #ifndef CONFIG_NANDSIM_DO_DELAYS
76 #define CONFIG_NANDSIM_DO_DELAYS 0
78 #ifndef CONFIG_NANDSIM_LOG
79 #define CONFIG_NANDSIM_LOG 0
81 #ifndef CONFIG_NANDSIM_DBG
82 #define CONFIG_NANDSIM_DBG 0
84 #ifndef CONFIG_NANDSIM_MAX_PARTS
85 #define CONFIG_NANDSIM_MAX_PARTS 32
88 static uint first_id_byte = CONFIG_NANDSIM_FIRST_ID_BYTE;
89 static uint second_id_byte = CONFIG_NANDSIM_SECOND_ID_BYTE;
90 static uint third_id_byte = CONFIG_NANDSIM_THIRD_ID_BYTE;
91 static uint fourth_id_byte = CONFIG_NANDSIM_FOURTH_ID_BYTE;
92 static uint access_delay = CONFIG_NANDSIM_ACCESS_DELAY;
93 static uint programm_delay = CONFIG_NANDSIM_PROGRAMM_DELAY;
94 static uint erase_delay = CONFIG_NANDSIM_ERASE_DELAY;
95 static uint output_cycle = CONFIG_NANDSIM_OUTPUT_CYCLE;
96 static uint input_cycle = CONFIG_NANDSIM_INPUT_CYCLE;
97 static uint bus_width = CONFIG_NANDSIM_BUS_WIDTH;
98 static uint do_delays = CONFIG_NANDSIM_DO_DELAYS;
99 static uint log = CONFIG_NANDSIM_LOG;
100 static uint dbg = CONFIG_NANDSIM_DBG;
101 static unsigned long parts[CONFIG_NANDSIM_MAX_PARTS];
102 static unsigned int parts_num;
103 static char *badblocks = NULL;
104 static char *weakblocks = NULL;
105 static char *weakpages = NULL;
106 static unsigned int bitflips = 0;
107 static char *gravepages = NULL;
108 static unsigned int rptwear = 0;
109 static unsigned int overridesize = 0;
110 static char *cache_file = NULL;
111 static unsigned int bbt;
112 static unsigned int bch;
114 module_param(first_id_byte, uint, 0400);
115 module_param(second_id_byte, uint, 0400);
116 module_param(third_id_byte, uint, 0400);
117 module_param(fourth_id_byte, uint, 0400);
118 module_param(access_delay, uint, 0400);
119 module_param(programm_delay, uint, 0400);
120 module_param(erase_delay, uint, 0400);
121 module_param(output_cycle, uint, 0400);
122 module_param(input_cycle, uint, 0400);
123 module_param(bus_width, uint, 0400);
124 module_param(do_delays, uint, 0400);
125 module_param(log, uint, 0400);
126 module_param(dbg, uint, 0400);
127 module_param_array(parts, ulong, &parts_num, 0400);
128 module_param(badblocks, charp, 0400);
129 module_param(weakblocks, charp, 0400);
130 module_param(weakpages, charp, 0400);
131 module_param(bitflips, uint, 0400);
132 module_param(gravepages, charp, 0400);
133 module_param(rptwear, uint, 0400);
134 module_param(overridesize, uint, 0400);
135 module_param(cache_file, charp, 0400);
136 module_param(bbt, uint, 0400);
137 module_param(bch, uint, 0400);
139 MODULE_PARM_DESC(first_id_byte, "The first byte returned by NAND Flash 'read ID' command (manufacturer ID)");
140 MODULE_PARM_DESC(second_id_byte, "The second byte returned by NAND Flash 'read ID' command (chip ID)");
141 MODULE_PARM_DESC(third_id_byte, "The third byte returned by NAND Flash 'read ID' command");
142 MODULE_PARM_DESC(fourth_id_byte, "The fourth byte returned by NAND Flash 'read ID' command");
143 MODULE_PARM_DESC(access_delay, "Initial page access delay (microseconds)");
144 MODULE_PARM_DESC(programm_delay, "Page programm delay (microseconds");
145 MODULE_PARM_DESC(erase_delay, "Sector erase delay (milliseconds)");
146 MODULE_PARM_DESC(output_cycle, "Word output (from flash) time (nanoseconds)");
147 MODULE_PARM_DESC(input_cycle, "Word input (to flash) time (nanoseconds)");
148 MODULE_PARM_DESC(bus_width, "Chip's bus width (8- or 16-bit)");
149 MODULE_PARM_DESC(do_delays, "Simulate NAND delays using busy-waits if not zero");
150 MODULE_PARM_DESC(log, "Perform logging if not zero");
151 MODULE_PARM_DESC(dbg, "Output debug information if not zero");
152 MODULE_PARM_DESC(parts, "Partition sizes (in erase blocks) separated by commas");
153 /* Page and erase block positions for the following parameters are independent of any partitions */
154 MODULE_PARM_DESC(badblocks, "Erase blocks that are initially marked bad, separated by commas");
155 MODULE_PARM_DESC(weakblocks, "Weak erase blocks [: remaining erase cycles (defaults to 3)]"
156 " separated by commas e.g. 113:2 means eb 113"
157 " can be erased only twice before failing");
158 MODULE_PARM_DESC(weakpages, "Weak pages [: maximum writes (defaults to 3)]"
159 " separated by commas e.g. 1401:2 means page 1401"
160 " can be written only twice before failing");
161 MODULE_PARM_DESC(bitflips, "Maximum number of random bit flips per page (zero by default)");
162 MODULE_PARM_DESC(gravepages, "Pages that lose data [: maximum reads (defaults to 3)]"
163 " separated by commas e.g. 1401:2 means page 1401"
164 " can be read only twice before failing");
165 MODULE_PARM_DESC(rptwear, "Number of erases between reporting wear, if not zero");
166 MODULE_PARM_DESC(overridesize, "Specifies the NAND Flash size overriding the ID bytes. "
167 "The size is specified in erase blocks and as the exponent of a power of two"
168 " e.g. 5 means a size of 32 erase blocks");
169 MODULE_PARM_DESC(cache_file, "File to use to cache nand pages instead of memory");
170 MODULE_PARM_DESC(bbt, "0 OOB, 1 BBT with marker in OOB, 2 BBT with marker in data area");
171 MODULE_PARM_DESC(bch, "Enable BCH ecc and set how many bits should "
172 "be correctable in 512-byte blocks");
174 /* The largest possible page size */
175 #define NS_LARGEST_PAGE_SIZE 4096
177 /* The prefix for simulator output */
178 #define NS_OUTPUT_PREFIX "[nandsim]"
180 /* Simulator's output macros (logging, debugging, warning, error) */
181 #define NS_LOG(args...) \
182 do { if (log) printk(KERN_DEBUG NS_OUTPUT_PREFIX " log: " args); } while(0)
183 #define NS_DBG(args...) \
184 do { if (dbg) printk(KERN_DEBUG NS_OUTPUT_PREFIX " debug: " args); } while(0)
185 #define NS_WARN(args...) \
186 do { printk(KERN_WARNING NS_OUTPUT_PREFIX " warning: " args); } while(0)
187 #define NS_ERR(args...) \
188 do { printk(KERN_ERR NS_OUTPUT_PREFIX " error: " args); } while(0)
189 #define NS_INFO(args...) \
190 do { printk(KERN_INFO NS_OUTPUT_PREFIX " " args); } while(0)
192 /* Busy-wait delay macros (microseconds, milliseconds) */
193 #define NS_UDELAY(us) \
194 do { if (do_delays) udelay(us); } while(0)
195 #define NS_MDELAY(us) \
196 do { if (do_delays) mdelay(us); } while(0)
198 /* Is the nandsim structure initialized ? */
199 #define NS_IS_INITIALIZED(ns) ((ns)->geom.totsz != 0)
201 /* Good operation completion status */
202 #define NS_STATUS_OK(ns) (NAND_STATUS_READY | (NAND_STATUS_WP * ((ns)->lines.wp == 0)))
204 /* Operation failed completion status */
205 #define NS_STATUS_FAILED(ns) (NAND_STATUS_FAIL | NS_STATUS_OK(ns))
207 /* Calculate the page offset in flash RAM image by (row, column) address */
208 #define NS_RAW_OFFSET(ns) \
209 (((ns)->regs.row << (ns)->geom.pgshift) + ((ns)->regs.row * (ns)->geom.oobsz) + (ns)->regs.column)
211 /* Calculate the OOB offset in flash RAM image by (row, column) address */
212 #define NS_RAW_OFFSET_OOB(ns) (NS_RAW_OFFSET(ns) + ns->geom.pgsz)
214 /* After a command is input, the simulator goes to one of the following states */
215 #define STATE_CMD_READ0 0x00000001 /* read data from the beginning of page */
216 #define STATE_CMD_READ1 0x00000002 /* read data from the second half of page */
217 #define STATE_CMD_READSTART 0x00000003 /* read data second command (large page devices) */
218 #define STATE_CMD_PAGEPROG 0x00000004 /* start page program */
219 #define STATE_CMD_READOOB 0x00000005 /* read OOB area */
220 #define STATE_CMD_ERASE1 0x00000006 /* sector erase first command */
221 #define STATE_CMD_STATUS 0x00000007 /* read status */
222 #define STATE_CMD_STATUS_M 0x00000008 /* read multi-plane status (isn't implemented) */
223 #define STATE_CMD_SEQIN 0x00000009 /* sequential data input */
224 #define STATE_CMD_READID 0x0000000A /* read ID */
225 #define STATE_CMD_ERASE2 0x0000000B /* sector erase second command */
226 #define STATE_CMD_RESET 0x0000000C /* reset */
227 #define STATE_CMD_RNDOUT 0x0000000D /* random output command */
228 #define STATE_CMD_RNDOUTSTART 0x0000000E /* random output start command */
229 #define STATE_CMD_MASK 0x0000000F /* command states mask */
231 /* After an address is input, the simulator goes to one of these states */
232 #define STATE_ADDR_PAGE 0x00000010 /* full (row, column) address is accepted */
233 #define STATE_ADDR_SEC 0x00000020 /* sector address was accepted */
234 #define STATE_ADDR_COLUMN 0x00000030 /* column address was accepted */
235 #define STATE_ADDR_ZERO 0x00000040 /* one byte zero address was accepted */
236 #define STATE_ADDR_MASK 0x00000070 /* address states mask */
238 /* During data input/output the simulator is in these states */
239 #define STATE_DATAIN 0x00000100 /* waiting for data input */
240 #define STATE_DATAIN_MASK 0x00000100 /* data input states mask */
242 #define STATE_DATAOUT 0x00001000 /* waiting for page data output */
243 #define STATE_DATAOUT_ID 0x00002000 /* waiting for ID bytes output */
244 #define STATE_DATAOUT_STATUS 0x00003000 /* waiting for status output */
245 #define STATE_DATAOUT_STATUS_M 0x00004000 /* waiting for multi-plane status output */
246 #define STATE_DATAOUT_MASK 0x00007000 /* data output states mask */
248 /* Previous operation is done, ready to accept new requests */
249 #define STATE_READY 0x00000000
251 /* This state is used to mark that the next state isn't known yet */
252 #define STATE_UNKNOWN 0x10000000
254 /* Simulator's actions bit masks */
255 #define ACTION_CPY 0x00100000 /* copy page/OOB to the internal buffer */
256 #define ACTION_PRGPAGE 0x00200000 /* program the internal buffer to flash */
257 #define ACTION_SECERASE 0x00300000 /* erase sector */
258 #define ACTION_ZEROOFF 0x00400000 /* don't add any offset to address */
259 #define ACTION_HALFOFF 0x00500000 /* add to address half of page */
260 #define ACTION_OOBOFF 0x00600000 /* add to address OOB offset */
261 #define ACTION_MASK 0x00700000 /* action mask */
263 #define NS_OPER_NUM 13 /* Number of operations supported by the simulator */
264 #define NS_OPER_STATES 6 /* Maximum number of states in operation */
266 #define OPT_ANY 0xFFFFFFFF /* any chip supports this operation */
267 #define OPT_PAGE256 0x00000001 /* 256-byte page chips */
268 #define OPT_PAGE512 0x00000002 /* 512-byte page chips */
269 #define OPT_PAGE2048 0x00000008 /* 2048-byte page chips */
270 #define OPT_SMARTMEDIA 0x00000010 /* SmartMedia technology chips */
271 #define OPT_PAGE512_8BIT 0x00000040 /* 512-byte page chips with 8-bit bus width */
272 #define OPT_PAGE4096 0x00000080 /* 4096-byte page chips */
273 #define OPT_LARGEPAGE (OPT_PAGE2048 | OPT_PAGE4096) /* 2048 & 4096-byte page chips */
274 #define OPT_SMALLPAGE (OPT_PAGE256 | OPT_PAGE512) /* 256 and 512-byte page chips */
276 /* Remove action bits from state */
277 #define NS_STATE(x) ((x) & ~ACTION_MASK)
280 * Maximum previous states which need to be saved. Currently saving is
281 * only needed for page program operation with preceded read command
282 * (which is only valid for 512-byte pages).
284 #define NS_MAX_PREVSTATES 1
286 /* Maximum page cache pages needed to read or write a NAND page to the cache_file */
287 #define NS_MAX_HELD_PAGES 16
290 * A union to represent flash memory contents and flash buffer.
293 u_char *byte; /* for byte access */
294 uint16_t *word; /* for 16-bit word access */
298 * The structure which describes all the internal simulator data.
301 struct mtd_partition partitions[CONFIG_NANDSIM_MAX_PARTS];
302 unsigned int nbparts;
304 uint busw; /* flash chip bus width (8 or 16) */
305 u_char ids[4]; /* chip's ID bytes */
306 uint32_t options; /* chip's characteristic bits */
307 uint32_t state; /* current chip state */
308 uint32_t nxstate; /* next expected state */
310 uint32_t *op; /* current operation, NULL operations isn't known yet */
311 uint32_t pstates[NS_MAX_PREVSTATES]; /* previous states */
312 uint16_t npstates; /* number of previous states saved */
313 uint16_t stateidx; /* current state index */
315 /* The simulated NAND flash pages array */
318 /* Slab allocator for nand pages */
319 struct kmem_cache *nand_pages_slab;
321 /* Internal buffer of page + OOB size bytes */
324 /* NAND flash "geometry" */
326 uint64_t totsz; /* total flash size, bytes */
327 uint32_t secsz; /* flash sector (erase block) size, bytes */
328 uint pgsz; /* NAND flash page size, bytes */
329 uint oobsz; /* page OOB area size, bytes */
330 uint64_t totszoob; /* total flash size including OOB, bytes */
331 uint pgszoob; /* page size including OOB , bytes*/
332 uint secszoob; /* sector size including OOB, bytes */
333 uint pgnum; /* total number of pages */
334 uint pgsec; /* number of pages per sector */
335 uint secshift; /* bits number in sector size */
336 uint pgshift; /* bits number in page size */
337 uint oobshift; /* bits number in OOB size */
338 uint pgaddrbytes; /* bytes per page address */
339 uint secaddrbytes; /* bytes per sector address */
340 uint idbytes; /* the number ID bytes that this chip outputs */
343 /* NAND flash internal registers */
345 unsigned command; /* the command register */
346 u_char status; /* the status register */
347 uint row; /* the page number */
348 uint column; /* the offset within page */
349 uint count; /* internal counter */
350 uint num; /* number of bytes which must be processed */
351 uint off; /* fixed page offset */
354 /* NAND flash lines state */
356 int ce; /* chip Enable */
357 int cle; /* command Latch Enable */
358 int ale; /* address Latch Enable */
359 int wp; /* write Protect */
362 /* Fields needed when using a cache file */
363 struct file *cfile; /* Open file */
364 unsigned char *pages_written; /* Which pages have been written */
366 struct page *held_pages[NS_MAX_HELD_PAGES];
371 * Operations array. To perform any operation the simulator must pass
372 * through the correspondent states chain.
374 static struct nandsim_operations {
375 uint32_t reqopts; /* options which are required to perform the operation */
376 uint32_t states[NS_OPER_STATES]; /* operation's states */
377 } ops[NS_OPER_NUM] = {
378 /* Read page + OOB from the beginning */
379 {OPT_SMALLPAGE, {STATE_CMD_READ0 | ACTION_ZEROOFF, STATE_ADDR_PAGE | ACTION_CPY,
380 STATE_DATAOUT, STATE_READY}},
381 /* Read page + OOB from the second half */
382 {OPT_PAGE512_8BIT, {STATE_CMD_READ1 | ACTION_HALFOFF, STATE_ADDR_PAGE | ACTION_CPY,
383 STATE_DATAOUT, STATE_READY}},
385 {OPT_SMALLPAGE, {STATE_CMD_READOOB | ACTION_OOBOFF, STATE_ADDR_PAGE | ACTION_CPY,
386 STATE_DATAOUT, STATE_READY}},
387 /* Program page starting from the beginning */
388 {OPT_ANY, {STATE_CMD_SEQIN, STATE_ADDR_PAGE, STATE_DATAIN,
389 STATE_CMD_PAGEPROG | ACTION_PRGPAGE, STATE_READY}},
390 /* Program page starting from the beginning */
391 {OPT_SMALLPAGE, {STATE_CMD_READ0, STATE_CMD_SEQIN | ACTION_ZEROOFF, STATE_ADDR_PAGE,
392 STATE_DATAIN, STATE_CMD_PAGEPROG | ACTION_PRGPAGE, STATE_READY}},
393 /* Program page starting from the second half */
394 {OPT_PAGE512, {STATE_CMD_READ1, STATE_CMD_SEQIN | ACTION_HALFOFF, STATE_ADDR_PAGE,
395 STATE_DATAIN, STATE_CMD_PAGEPROG | ACTION_PRGPAGE, STATE_READY}},
397 {OPT_SMALLPAGE, {STATE_CMD_READOOB, STATE_CMD_SEQIN | ACTION_OOBOFF, STATE_ADDR_PAGE,
398 STATE_DATAIN, STATE_CMD_PAGEPROG | ACTION_PRGPAGE, STATE_READY}},
400 {OPT_ANY, {STATE_CMD_ERASE1, STATE_ADDR_SEC, STATE_CMD_ERASE2 | ACTION_SECERASE, STATE_READY}},
402 {OPT_ANY, {STATE_CMD_STATUS, STATE_DATAOUT_STATUS, STATE_READY}},
403 /* Read multi-plane status */
404 {OPT_SMARTMEDIA, {STATE_CMD_STATUS_M, STATE_DATAOUT_STATUS_M, STATE_READY}},
406 {OPT_ANY, {STATE_CMD_READID, STATE_ADDR_ZERO, STATE_DATAOUT_ID, STATE_READY}},
407 /* Large page devices read page */
408 {OPT_LARGEPAGE, {STATE_CMD_READ0, STATE_ADDR_PAGE, STATE_CMD_READSTART | ACTION_CPY,
409 STATE_DATAOUT, STATE_READY}},
410 /* Large page devices random page read */
411 {OPT_LARGEPAGE, {STATE_CMD_RNDOUT, STATE_ADDR_COLUMN, STATE_CMD_RNDOUTSTART | ACTION_CPY,
412 STATE_DATAOUT, STATE_READY}},
416 struct list_head list;
417 unsigned int erase_block_no;
418 unsigned int max_erases;
419 unsigned int erases_done;
422 static LIST_HEAD(weak_blocks);
425 struct list_head list;
426 unsigned int page_no;
427 unsigned int max_writes;
428 unsigned int writes_done;
431 static LIST_HEAD(weak_pages);
434 struct list_head list;
435 unsigned int page_no;
436 unsigned int max_reads;
437 unsigned int reads_done;
440 static LIST_HEAD(grave_pages);
442 static unsigned long *erase_block_wear = NULL;
443 static unsigned int wear_eb_count = 0;
444 static unsigned long total_wear = 0;
445 static unsigned int rptwear_cnt = 0;
447 /* MTD structure for NAND controller */
448 static struct mtd_info *nsmtd;
451 * Allocate array of page pointers, create slab allocation for an array
452 * and initialize the array by NULL pointers.
454 * RETURNS: 0 if success, -ENOMEM if memory alloc fails.
456 static int alloc_device(struct nandsim *ns)
462 cfile = filp_open(cache_file, O_CREAT | O_RDWR | O_LARGEFILE, 0600);
464 return PTR_ERR(cfile);
465 if (!cfile->f_op || (!cfile->f_op->read && !cfile->f_op->aio_read)) {
466 NS_ERR("alloc_device: cache file not readable\n");
470 if (!cfile->f_op->write && !cfile->f_op->aio_write) {
471 NS_ERR("alloc_device: cache file not writeable\n");
475 ns->pages_written = vzalloc(ns->geom.pgnum);
476 if (!ns->pages_written) {
477 NS_ERR("alloc_device: unable to allocate pages written array\n");
481 ns->file_buf = kmalloc(ns->geom.pgszoob, GFP_KERNEL);
483 NS_ERR("alloc_device: unable to allocate file buf\n");
491 ns->pages = vmalloc(ns->geom.pgnum * sizeof(union ns_mem));
493 NS_ERR("alloc_device: unable to allocate page array\n");
496 for (i = 0; i < ns->geom.pgnum; i++) {
497 ns->pages[i].byte = NULL;
499 ns->nand_pages_slab = kmem_cache_create("nandsim",
500 ns->geom.pgszoob, 0, 0, NULL);
501 if (!ns->nand_pages_slab) {
502 NS_ERR("cache_create: unable to create kmem_cache\n");
509 vfree(ns->pages_written);
511 filp_close(cfile, NULL);
516 * Free any allocated pages, and free the array of page pointers.
518 static void free_device(struct nandsim *ns)
524 vfree(ns->pages_written);
525 filp_close(ns->cfile, NULL);
530 for (i = 0; i < ns->geom.pgnum; i++) {
531 if (ns->pages[i].byte)
532 kmem_cache_free(ns->nand_pages_slab,
535 kmem_cache_destroy(ns->nand_pages_slab);
540 static char *get_partition_name(int i)
543 sprintf(buf, "NAND simulator partition %d", i);
544 return kstrdup(buf, GFP_KERNEL);
548 * Initialize the nandsim structure.
550 * RETURNS: 0 if success, -ERRNO if failure.
552 static int init_nandsim(struct mtd_info *mtd)
554 struct nand_chip *chip = mtd->priv;
555 struct nandsim *ns = chip->priv;
558 uint64_t next_offset;
560 if (NS_IS_INITIALIZED(ns)) {
561 NS_ERR("init_nandsim: nandsim is already initialized\n");
565 /* Force mtd to not do delays */
566 chip->chip_delay = 0;
568 /* Initialize the NAND flash parameters */
569 ns->busw = chip->options & NAND_BUSWIDTH_16 ? 16 : 8;
570 ns->geom.totsz = mtd->size;
571 ns->geom.pgsz = mtd->writesize;
572 ns->geom.oobsz = mtd->oobsize;
573 ns->geom.secsz = mtd->erasesize;
574 ns->geom.pgszoob = ns->geom.pgsz + ns->geom.oobsz;
575 ns->geom.pgnum = div_u64(ns->geom.totsz, ns->geom.pgsz);
576 ns->geom.totszoob = ns->geom.totsz + (uint64_t)ns->geom.pgnum * ns->geom.oobsz;
577 ns->geom.secshift = ffs(ns->geom.secsz) - 1;
578 ns->geom.pgshift = chip->page_shift;
579 ns->geom.oobshift = ffs(ns->geom.oobsz) - 1;
580 ns->geom.pgsec = ns->geom.secsz / ns->geom.pgsz;
581 ns->geom.secszoob = ns->geom.secsz + ns->geom.oobsz * ns->geom.pgsec;
584 if (ns->geom.pgsz == 256) {
585 ns->options |= OPT_PAGE256;
587 else if (ns->geom.pgsz == 512) {
588 ns->options |= OPT_PAGE512;
590 ns->options |= OPT_PAGE512_8BIT;
591 } else if (ns->geom.pgsz == 2048) {
592 ns->options |= OPT_PAGE2048;
593 } else if (ns->geom.pgsz == 4096) {
594 ns->options |= OPT_PAGE4096;
596 NS_ERR("init_nandsim: unknown page size %u\n", ns->geom.pgsz);
600 if (ns->options & OPT_SMALLPAGE) {
601 if (ns->geom.totsz <= (32 << 20)) {
602 ns->geom.pgaddrbytes = 3;
603 ns->geom.secaddrbytes = 2;
605 ns->geom.pgaddrbytes = 4;
606 ns->geom.secaddrbytes = 3;
609 if (ns->geom.totsz <= (128 << 20)) {
610 ns->geom.pgaddrbytes = 4;
611 ns->geom.secaddrbytes = 2;
613 ns->geom.pgaddrbytes = 5;
614 ns->geom.secaddrbytes = 3;
618 /* Fill the partition_info structure */
619 if (parts_num > ARRAY_SIZE(ns->partitions)) {
620 NS_ERR("too many partitions.\n");
624 remains = ns->geom.totsz;
626 for (i = 0; i < parts_num; ++i) {
627 uint64_t part_sz = (uint64_t)parts[i] * ns->geom.secsz;
629 if (!part_sz || part_sz > remains) {
630 NS_ERR("bad partition size.\n");
634 ns->partitions[i].name = get_partition_name(i);
635 ns->partitions[i].offset = next_offset;
636 ns->partitions[i].size = part_sz;
637 next_offset += ns->partitions[i].size;
638 remains -= ns->partitions[i].size;
640 ns->nbparts = parts_num;
642 if (parts_num + 1 > ARRAY_SIZE(ns->partitions)) {
643 NS_ERR("too many partitions.\n");
647 ns->partitions[i].name = get_partition_name(i);
648 ns->partitions[i].offset = next_offset;
649 ns->partitions[i].size = remains;
653 /* Detect how many ID bytes the NAND chip outputs */
654 for (i = 0; nand_flash_ids[i].name != NULL; i++) {
655 if (second_id_byte != nand_flash_ids[i].id)
660 NS_WARN("16-bit flashes support wasn't tested\n");
662 printk("flash size: %llu MiB\n",
663 (unsigned long long)ns->geom.totsz >> 20);
664 printk("page size: %u bytes\n", ns->geom.pgsz);
665 printk("OOB area size: %u bytes\n", ns->geom.oobsz);
666 printk("sector size: %u KiB\n", ns->geom.secsz >> 10);
667 printk("pages number: %u\n", ns->geom.pgnum);
668 printk("pages per sector: %u\n", ns->geom.pgsec);
669 printk("bus width: %u\n", ns->busw);
670 printk("bits in sector size: %u\n", ns->geom.secshift);
671 printk("bits in page size: %u\n", ns->geom.pgshift);
672 printk("bits in OOB size: %u\n", ns->geom.oobshift);
673 printk("flash size with OOB: %llu KiB\n",
674 (unsigned long long)ns->geom.totszoob >> 10);
675 printk("page address bytes: %u\n", ns->geom.pgaddrbytes);
676 printk("sector address bytes: %u\n", ns->geom.secaddrbytes);
677 printk("options: %#x\n", ns->options);
679 if ((ret = alloc_device(ns)) != 0)
682 /* Allocate / initialize the internal buffer */
683 ns->buf.byte = kmalloc(ns->geom.pgszoob, GFP_KERNEL);
685 NS_ERR("init_nandsim: unable to allocate %u bytes for the internal buffer\n",
690 memset(ns->buf.byte, 0xFF, ns->geom.pgszoob);
701 * Free the nandsim structure.
703 static void free_nandsim(struct nandsim *ns)
711 static int parse_badblocks(struct nandsim *ns, struct mtd_info *mtd)
715 unsigned int erase_block_no;
722 zero_ok = (*w == '0' ? 1 : 0);
723 erase_block_no = simple_strtoul(w, &w, 0);
724 if (!zero_ok && !erase_block_no) {
725 NS_ERR("invalid badblocks.\n");
728 offset = erase_block_no * ns->geom.secsz;
729 if (mtd_block_markbad(mtd, offset)) {
730 NS_ERR("invalid badblocks.\n");
739 static int parse_weakblocks(void)
743 unsigned int erase_block_no;
744 unsigned int max_erases;
745 struct weak_block *wb;
751 zero_ok = (*w == '0' ? 1 : 0);
752 erase_block_no = simple_strtoul(w, &w, 0);
753 if (!zero_ok && !erase_block_no) {
754 NS_ERR("invalid weakblocks.\n");
760 max_erases = simple_strtoul(w, &w, 0);
764 wb = kzalloc(sizeof(*wb), GFP_KERNEL);
766 NS_ERR("unable to allocate memory.\n");
769 wb->erase_block_no = erase_block_no;
770 wb->max_erases = max_erases;
771 list_add(&wb->list, &weak_blocks);
776 static int erase_error(unsigned int erase_block_no)
778 struct weak_block *wb;
780 list_for_each_entry(wb, &weak_blocks, list)
781 if (wb->erase_block_no == erase_block_no) {
782 if (wb->erases_done >= wb->max_erases)
784 wb->erases_done += 1;
790 static int parse_weakpages(void)
794 unsigned int page_no;
795 unsigned int max_writes;
796 struct weak_page *wp;
802 zero_ok = (*w == '0' ? 1 : 0);
803 page_no = simple_strtoul(w, &w, 0);
804 if (!zero_ok && !page_no) {
805 NS_ERR("invalid weakpagess.\n");
811 max_writes = simple_strtoul(w, &w, 0);
815 wp = kzalloc(sizeof(*wp), GFP_KERNEL);
817 NS_ERR("unable to allocate memory.\n");
820 wp->page_no = page_no;
821 wp->max_writes = max_writes;
822 list_add(&wp->list, &weak_pages);
827 static int write_error(unsigned int page_no)
829 struct weak_page *wp;
831 list_for_each_entry(wp, &weak_pages, list)
832 if (wp->page_no == page_no) {
833 if (wp->writes_done >= wp->max_writes)
835 wp->writes_done += 1;
841 static int parse_gravepages(void)
845 unsigned int page_no;
846 unsigned int max_reads;
847 struct grave_page *gp;
853 zero_ok = (*g == '0' ? 1 : 0);
854 page_no = simple_strtoul(g, &g, 0);
855 if (!zero_ok && !page_no) {
856 NS_ERR("invalid gravepagess.\n");
862 max_reads = simple_strtoul(g, &g, 0);
866 gp = kzalloc(sizeof(*gp), GFP_KERNEL);
868 NS_ERR("unable to allocate memory.\n");
871 gp->page_no = page_no;
872 gp->max_reads = max_reads;
873 list_add(&gp->list, &grave_pages);
878 static int read_error(unsigned int page_no)
880 struct grave_page *gp;
882 list_for_each_entry(gp, &grave_pages, list)
883 if (gp->page_no == page_no) {
884 if (gp->reads_done >= gp->max_reads)
892 static void free_lists(void)
894 struct list_head *pos, *n;
895 list_for_each_safe(pos, n, &weak_blocks) {
897 kfree(list_entry(pos, struct weak_block, list));
899 list_for_each_safe(pos, n, &weak_pages) {
901 kfree(list_entry(pos, struct weak_page, list));
903 list_for_each_safe(pos, n, &grave_pages) {
905 kfree(list_entry(pos, struct grave_page, list));
907 kfree(erase_block_wear);
910 static int setup_wear_reporting(struct mtd_info *mtd)
916 wear_eb_count = div_u64(mtd->size, mtd->erasesize);
917 mem = wear_eb_count * sizeof(unsigned long);
918 if (mem / sizeof(unsigned long) != wear_eb_count) {
919 NS_ERR("Too many erase blocks for wear reporting\n");
922 erase_block_wear = kzalloc(mem, GFP_KERNEL);
923 if (!erase_block_wear) {
924 NS_ERR("Too many erase blocks for wear reporting\n");
930 static void update_wear(unsigned int erase_block_no)
932 unsigned long wmin = -1, wmax = 0, avg;
933 unsigned long deciles[10], decile_max[10], tot = 0;
936 if (!erase_block_wear)
940 NS_ERR("Erase counter total overflow\n");
941 erase_block_wear[erase_block_no] += 1;
942 if (erase_block_wear[erase_block_no] == 0)
943 NS_ERR("Erase counter overflow for erase block %u\n", erase_block_no);
945 if (rptwear_cnt < rptwear)
948 /* Calc wear stats */
949 for (i = 0; i < wear_eb_count; ++i) {
950 unsigned long wear = erase_block_wear[i];
957 for (i = 0; i < 9; ++i) {
959 decile_max[i] = (wmax * (i + 1) + 5) / 10;
962 decile_max[9] = wmax;
963 for (i = 0; i < wear_eb_count; ++i) {
965 unsigned long wear = erase_block_wear[i];
966 for (d = 0; d < 10; ++d)
967 if (wear <= decile_max[d]) {
972 avg = tot / wear_eb_count;
973 /* Output wear report */
974 NS_INFO("*** Wear Report ***\n");
975 NS_INFO("Total numbers of erases: %lu\n", tot);
976 NS_INFO("Number of erase blocks: %u\n", wear_eb_count);
977 NS_INFO("Average number of erases: %lu\n", avg);
978 NS_INFO("Maximum number of erases: %lu\n", wmax);
979 NS_INFO("Minimum number of erases: %lu\n", wmin);
980 for (i = 0; i < 10; ++i) {
981 unsigned long from = (i ? decile_max[i - 1] + 1 : 0);
982 if (from > decile_max[i])
984 NS_INFO("Number of ebs with erase counts from %lu to %lu : %lu\n",
989 NS_INFO("*** End of Wear Report ***\n");
993 * Returns the string representation of 'state' state.
995 static char *get_state_name(uint32_t state)
997 switch (NS_STATE(state)) {
998 case STATE_CMD_READ0:
999 return "STATE_CMD_READ0";
1000 case STATE_CMD_READ1:
1001 return "STATE_CMD_READ1";
1002 case STATE_CMD_PAGEPROG:
1003 return "STATE_CMD_PAGEPROG";
1004 case STATE_CMD_READOOB:
1005 return "STATE_CMD_READOOB";
1006 case STATE_CMD_READSTART:
1007 return "STATE_CMD_READSTART";
1008 case STATE_CMD_ERASE1:
1009 return "STATE_CMD_ERASE1";
1010 case STATE_CMD_STATUS:
1011 return "STATE_CMD_STATUS";
1012 case STATE_CMD_STATUS_M:
1013 return "STATE_CMD_STATUS_M";
1014 case STATE_CMD_SEQIN:
1015 return "STATE_CMD_SEQIN";
1016 case STATE_CMD_READID:
1017 return "STATE_CMD_READID";
1018 case STATE_CMD_ERASE2:
1019 return "STATE_CMD_ERASE2";
1020 case STATE_CMD_RESET:
1021 return "STATE_CMD_RESET";
1022 case STATE_CMD_RNDOUT:
1023 return "STATE_CMD_RNDOUT";
1024 case STATE_CMD_RNDOUTSTART:
1025 return "STATE_CMD_RNDOUTSTART";
1026 case STATE_ADDR_PAGE:
1027 return "STATE_ADDR_PAGE";
1028 case STATE_ADDR_SEC:
1029 return "STATE_ADDR_SEC";
1030 case STATE_ADDR_ZERO:
1031 return "STATE_ADDR_ZERO";
1032 case STATE_ADDR_COLUMN:
1033 return "STATE_ADDR_COLUMN";
1035 return "STATE_DATAIN";
1037 return "STATE_DATAOUT";
1038 case STATE_DATAOUT_ID:
1039 return "STATE_DATAOUT_ID";
1040 case STATE_DATAOUT_STATUS:
1041 return "STATE_DATAOUT_STATUS";
1042 case STATE_DATAOUT_STATUS_M:
1043 return "STATE_DATAOUT_STATUS_M";
1045 return "STATE_READY";
1047 return "STATE_UNKNOWN";
1050 NS_ERR("get_state_name: unknown state, BUG\n");
1055 * Check if command is valid.
1057 * RETURNS: 1 if wrong command, 0 if right.
1059 static int check_command(int cmd)
1063 case NAND_CMD_READ0:
1064 case NAND_CMD_READ1:
1065 case NAND_CMD_READSTART:
1066 case NAND_CMD_PAGEPROG:
1067 case NAND_CMD_READOOB:
1068 case NAND_CMD_ERASE1:
1069 case NAND_CMD_STATUS:
1070 case NAND_CMD_SEQIN:
1071 case NAND_CMD_READID:
1072 case NAND_CMD_ERASE2:
1073 case NAND_CMD_RESET:
1074 case NAND_CMD_RNDOUT:
1075 case NAND_CMD_RNDOUTSTART:
1078 case NAND_CMD_STATUS_MULTI:
1085 * Returns state after command is accepted by command number.
1087 static uint32_t get_state_by_command(unsigned command)
1090 case NAND_CMD_READ0:
1091 return STATE_CMD_READ0;
1092 case NAND_CMD_READ1:
1093 return STATE_CMD_READ1;
1094 case NAND_CMD_PAGEPROG:
1095 return STATE_CMD_PAGEPROG;
1096 case NAND_CMD_READSTART:
1097 return STATE_CMD_READSTART;
1098 case NAND_CMD_READOOB:
1099 return STATE_CMD_READOOB;
1100 case NAND_CMD_ERASE1:
1101 return STATE_CMD_ERASE1;
1102 case NAND_CMD_STATUS:
1103 return STATE_CMD_STATUS;
1104 case NAND_CMD_STATUS_MULTI:
1105 return STATE_CMD_STATUS_M;
1106 case NAND_CMD_SEQIN:
1107 return STATE_CMD_SEQIN;
1108 case NAND_CMD_READID:
1109 return STATE_CMD_READID;
1110 case NAND_CMD_ERASE2:
1111 return STATE_CMD_ERASE2;
1112 case NAND_CMD_RESET:
1113 return STATE_CMD_RESET;
1114 case NAND_CMD_RNDOUT:
1115 return STATE_CMD_RNDOUT;
1116 case NAND_CMD_RNDOUTSTART:
1117 return STATE_CMD_RNDOUTSTART;
1120 NS_ERR("get_state_by_command: unknown command, BUG\n");
1125 * Move an address byte to the correspondent internal register.
1127 static inline void accept_addr_byte(struct nandsim *ns, u_char bt)
1129 uint byte = (uint)bt;
1131 if (ns->regs.count < (ns->geom.pgaddrbytes - ns->geom.secaddrbytes))
1132 ns->regs.column |= (byte << 8 * ns->regs.count);
1134 ns->regs.row |= (byte << 8 * (ns->regs.count -
1135 ns->geom.pgaddrbytes +
1136 ns->geom.secaddrbytes));
1143 * Switch to STATE_READY state.
1145 static inline void switch_to_ready_state(struct nandsim *ns, u_char status)
1147 NS_DBG("switch_to_ready_state: switch to %s state\n", get_state_name(STATE_READY));
1149 ns->state = STATE_READY;
1150 ns->nxstate = STATE_UNKNOWN;
1158 ns->regs.column = 0;
1159 ns->regs.status = status;
1163 * If the operation isn't known yet, try to find it in the global array
1164 * of supported operations.
1166 * Operation can be unknown because of the following.
1167 * 1. New command was accepted and this is the first call to find the
1168 * correspondent states chain. In this case ns->npstates = 0;
1169 * 2. There are several operations which begin with the same command(s)
1170 * (for example program from the second half and read from the
1171 * second half operations both begin with the READ1 command). In this
1172 * case the ns->pstates[] array contains previous states.
1174 * Thus, the function tries to find operation containing the following
1175 * states (if the 'flag' parameter is 0):
1176 * ns->pstates[0], ... ns->pstates[ns->npstates], ns->state
1178 * If (one and only one) matching operation is found, it is accepted (
1179 * ns->ops, ns->state, ns->nxstate are initialized, ns->npstate is
1182 * If there are several matches, the current state is pushed to the
1185 * The operation can be unknown only while commands are input to the chip.
1186 * As soon as address command is accepted, the operation must be known.
1187 * In such situation the function is called with 'flag' != 0, and the
1188 * operation is searched using the following pattern:
1189 * ns->pstates[0], ... ns->pstates[ns->npstates], <address input>
1191 * It is supposed that this pattern must either match one operation or
1192 * none. There can't be ambiguity in that case.
1194 * If no matches found, the function does the following:
1195 * 1. if there are saved states present, try to ignore them and search
1196 * again only using the last command. If nothing was found, switch
1197 * to the STATE_READY state.
1198 * 2. if there are no saved states, switch to the STATE_READY state.
1200 * RETURNS: -2 - no matched operations found.
1201 * -1 - several matches.
1202 * 0 - operation is found.
1204 static int find_operation(struct nandsim *ns, uint32_t flag)
1209 for (i = 0; i < NS_OPER_NUM; i++) {
1213 if (!(ns->options & ops[i].reqopts))
1214 /* Ignore operations we can't perform */
1218 if (!(ops[i].states[ns->npstates] & STATE_ADDR_MASK))
1221 if (NS_STATE(ns->state) != NS_STATE(ops[i].states[ns->npstates]))
1225 for (j = 0; j < ns->npstates; j++)
1226 if (NS_STATE(ops[i].states[j]) != NS_STATE(ns->pstates[j])
1227 && (ns->options & ops[idx].reqopts)) {
1238 if (opsfound == 1) {
1240 ns->op = &ops[idx].states[0];
1243 * In this case the find_operation function was
1244 * called when address has just began input. But it isn't
1245 * yet fully input and the current state must
1246 * not be one of STATE_ADDR_*, but the STATE_ADDR_*
1247 * state must be the next state (ns->nxstate).
1249 ns->stateidx = ns->npstates - 1;
1251 ns->stateidx = ns->npstates;
1254 ns->state = ns->op[ns->stateidx];
1255 ns->nxstate = ns->op[ns->stateidx + 1];
1256 NS_DBG("find_operation: operation found, index: %d, state: %s, nxstate %s\n",
1257 idx, get_state_name(ns->state), get_state_name(ns->nxstate));
1261 if (opsfound == 0) {
1262 /* Nothing was found. Try to ignore previous commands (if any) and search again */
1263 if (ns->npstates != 0) {
1264 NS_DBG("find_operation: no operation found, try again with state %s\n",
1265 get_state_name(ns->state));
1267 return find_operation(ns, 0);
1270 NS_DBG("find_operation: no operations found\n");
1271 switch_to_ready_state(ns, NS_STATUS_FAILED(ns));
1276 /* This shouldn't happen */
1277 NS_DBG("find_operation: BUG, operation must be known if address is input\n");
1281 NS_DBG("find_operation: there is still ambiguity\n");
1283 ns->pstates[ns->npstates++] = ns->state;
1288 static void put_pages(struct nandsim *ns)
1292 for (i = 0; i < ns->held_cnt; i++)
1293 page_cache_release(ns->held_pages[i]);
1296 /* Get page cache pages in advance to provide NOFS memory allocation */
1297 static int get_pages(struct nandsim *ns, struct file *file, size_t count, loff_t pos)
1299 pgoff_t index, start_index, end_index;
1301 struct address_space *mapping = file->f_mapping;
1303 start_index = pos >> PAGE_CACHE_SHIFT;
1304 end_index = (pos + count - 1) >> PAGE_CACHE_SHIFT;
1305 if (end_index - start_index + 1 > NS_MAX_HELD_PAGES)
1308 for (index = start_index; index <= end_index; index++) {
1309 page = find_get_page(mapping, index);
1311 page = find_or_create_page(mapping, index, GFP_NOFS);
1313 write_inode_now(mapping->host, 1);
1314 page = find_or_create_page(mapping, index, GFP_NOFS);
1322 ns->held_pages[ns->held_cnt++] = page;
1327 static int set_memalloc(void)
1329 if (current->flags & PF_MEMALLOC)
1331 current->flags |= PF_MEMALLOC;
1335 static void clear_memalloc(int memalloc)
1338 current->flags &= ~PF_MEMALLOC;
1341 static ssize_t read_file(struct nandsim *ns, struct file *file, void *buf, size_t count, loff_t *pos)
1343 mm_segment_t old_fs;
1347 err = get_pages(ns, file, count, *pos);
1352 memalloc = set_memalloc();
1353 tx = vfs_read(file, (char __user *)buf, count, pos);
1354 clear_memalloc(memalloc);
1360 static ssize_t write_file(struct nandsim *ns, struct file *file, void *buf, size_t count, loff_t *pos)
1362 mm_segment_t old_fs;
1366 err = get_pages(ns, file, count, *pos);
1371 memalloc = set_memalloc();
1372 tx = vfs_write(file, (char __user *)buf, count, pos);
1373 clear_memalloc(memalloc);
1380 * Returns a pointer to the current page.
1382 static inline union ns_mem *NS_GET_PAGE(struct nandsim *ns)
1384 return &(ns->pages[ns->regs.row]);
1388 * Retuns a pointer to the current byte, within the current page.
1390 static inline u_char *NS_PAGE_BYTE_OFF(struct nandsim *ns)
1392 return NS_GET_PAGE(ns)->byte + ns->regs.column + ns->regs.off;
1395 int do_read_error(struct nandsim *ns, int num)
1397 unsigned int page_no = ns->regs.row;
1399 if (read_error(page_no)) {
1400 prandom_bytes(ns->buf.byte, num);
1401 NS_WARN("simulating read error in page %u\n", page_no);
1407 void do_bit_flips(struct nandsim *ns, int num)
1409 if (bitflips && random32() < (1 << 22)) {
1412 flips = (random32() % (int) bitflips) + 1;
1414 int pos = random32() % (num * 8);
1415 ns->buf.byte[pos / 8] ^= (1 << (pos % 8));
1416 NS_WARN("read_page: flipping bit %d in page %d "
1417 "reading from %d ecc: corrected=%u failed=%u\n",
1418 pos, ns->regs.row, ns->regs.column + ns->regs.off,
1419 nsmtd->ecc_stats.corrected, nsmtd->ecc_stats.failed);
1425 * Fill the NAND buffer with data read from the specified page.
1427 static void read_page(struct nandsim *ns, int num)
1429 union ns_mem *mypage;
1432 if (!ns->pages_written[ns->regs.row]) {
1433 NS_DBG("read_page: page %d not written\n", ns->regs.row);
1434 memset(ns->buf.byte, 0xFF, num);
1439 NS_DBG("read_page: page %d written, reading from %d\n",
1440 ns->regs.row, ns->regs.column + ns->regs.off);
1441 if (do_read_error(ns, num))
1443 pos = (loff_t)ns->regs.row * ns->geom.pgszoob + ns->regs.column + ns->regs.off;
1444 tx = read_file(ns, ns->cfile, ns->buf.byte, num, &pos);
1446 NS_ERR("read_page: read error for page %d ret %ld\n", ns->regs.row, (long)tx);
1449 do_bit_flips(ns, num);
1454 mypage = NS_GET_PAGE(ns);
1455 if (mypage->byte == NULL) {
1456 NS_DBG("read_page: page %d not allocated\n", ns->regs.row);
1457 memset(ns->buf.byte, 0xFF, num);
1459 NS_DBG("read_page: page %d allocated, reading from %d\n",
1460 ns->regs.row, ns->regs.column + ns->regs.off);
1461 if (do_read_error(ns, num))
1463 memcpy(ns->buf.byte, NS_PAGE_BYTE_OFF(ns), num);
1464 do_bit_flips(ns, num);
1469 * Erase all pages in the specified sector.
1471 static void erase_sector(struct nandsim *ns)
1473 union ns_mem *mypage;
1477 for (i = 0; i < ns->geom.pgsec; i++)
1478 if (ns->pages_written[ns->regs.row + i]) {
1479 NS_DBG("erase_sector: freeing page %d\n", ns->regs.row + i);
1480 ns->pages_written[ns->regs.row + i] = 0;
1485 mypage = NS_GET_PAGE(ns);
1486 for (i = 0; i < ns->geom.pgsec; i++) {
1487 if (mypage->byte != NULL) {
1488 NS_DBG("erase_sector: freeing page %d\n", ns->regs.row+i);
1489 kmem_cache_free(ns->nand_pages_slab, mypage->byte);
1490 mypage->byte = NULL;
1497 * Program the specified page with the contents from the NAND buffer.
1499 static int prog_page(struct nandsim *ns, int num)
1502 union ns_mem *mypage;
1510 NS_DBG("prog_page: writing page %d\n", ns->regs.row);
1511 pg_off = ns->file_buf + ns->regs.column + ns->regs.off;
1512 off = (loff_t)ns->regs.row * ns->geom.pgszoob + ns->regs.column + ns->regs.off;
1513 if (!ns->pages_written[ns->regs.row]) {
1515 memset(ns->file_buf, 0xff, ns->geom.pgszoob);
1519 tx = read_file(ns, ns->cfile, pg_off, num, &pos);
1521 NS_ERR("prog_page: read error for page %d ret %ld\n", ns->regs.row, (long)tx);
1525 for (i = 0; i < num; i++)
1526 pg_off[i] &= ns->buf.byte[i];
1528 pos = (loff_t)ns->regs.row * ns->geom.pgszoob;
1529 tx = write_file(ns, ns->cfile, ns->file_buf, ns->geom.pgszoob, &pos);
1530 if (tx != ns->geom.pgszoob) {
1531 NS_ERR("prog_page: write error for page %d ret %ld\n", ns->regs.row, (long)tx);
1534 ns->pages_written[ns->regs.row] = 1;
1537 tx = write_file(ns, ns->cfile, pg_off, num, &pos);
1539 NS_ERR("prog_page: write error for page %d ret %ld\n", ns->regs.row, (long)tx);
1546 mypage = NS_GET_PAGE(ns);
1547 if (mypage->byte == NULL) {
1548 NS_DBG("prog_page: allocating page %d\n", ns->regs.row);
1550 * We allocate memory with GFP_NOFS because a flash FS may
1551 * utilize this. If it is holding an FS lock, then gets here,
1552 * then kernel memory alloc runs writeback which goes to the FS
1553 * again and deadlocks. This was seen in practice.
1555 mypage->byte = kmem_cache_alloc(ns->nand_pages_slab, GFP_NOFS);
1556 if (mypage->byte == NULL) {
1557 NS_ERR("prog_page: error allocating memory for page %d\n", ns->regs.row);
1560 memset(mypage->byte, 0xFF, ns->geom.pgszoob);
1563 pg_off = NS_PAGE_BYTE_OFF(ns);
1564 for (i = 0; i < num; i++)
1565 pg_off[i] &= ns->buf.byte[i];
1571 * If state has any action bit, perform this action.
1573 * RETURNS: 0 if success, -1 if error.
1575 static int do_state_action(struct nandsim *ns, uint32_t action)
1578 int busdiv = ns->busw == 8 ? 1 : 2;
1579 unsigned int erase_block_no, page_no;
1581 action &= ACTION_MASK;
1583 /* Check that page address input is correct */
1584 if (action != ACTION_SECERASE && ns->regs.row >= ns->geom.pgnum) {
1585 NS_WARN("do_state_action: wrong page number (%#x)\n", ns->regs.row);
1593 * Copy page data to the internal buffer.
1596 /* Column shouldn't be very large */
1597 if (ns->regs.column >= (ns->geom.pgszoob - ns->regs.off)) {
1598 NS_ERR("do_state_action: column number is too large\n");
1601 num = ns->geom.pgszoob - ns->regs.off - ns->regs.column;
1604 NS_DBG("do_state_action: (ACTION_CPY:) copy %d bytes to int buf, raw offset %d\n",
1605 num, NS_RAW_OFFSET(ns) + ns->regs.off);
1607 if (ns->regs.off == 0)
1608 NS_LOG("read page %d\n", ns->regs.row);
1609 else if (ns->regs.off < ns->geom.pgsz)
1610 NS_LOG("read page %d (second half)\n", ns->regs.row);
1612 NS_LOG("read OOB of page %d\n", ns->regs.row);
1614 NS_UDELAY(access_delay);
1615 NS_UDELAY(input_cycle * ns->geom.pgsz / 1000 / busdiv);
1619 case ACTION_SECERASE:
1625 NS_ERR("do_state_action: device is write-protected, ignore sector erase\n");
1629 if (ns->regs.row >= ns->geom.pgnum - ns->geom.pgsec
1630 || (ns->regs.row & ~(ns->geom.secsz - 1))) {
1631 NS_ERR("do_state_action: wrong sector address (%#x)\n", ns->regs.row);
1635 ns->regs.row = (ns->regs.row <<
1636 8 * (ns->geom.pgaddrbytes - ns->geom.secaddrbytes)) | ns->regs.column;
1637 ns->regs.column = 0;
1639 erase_block_no = ns->regs.row >> (ns->geom.secshift - ns->geom.pgshift);
1641 NS_DBG("do_state_action: erase sector at address %#x, off = %d\n",
1642 ns->regs.row, NS_RAW_OFFSET(ns));
1643 NS_LOG("erase sector %u\n", erase_block_no);
1647 NS_MDELAY(erase_delay);
1649 if (erase_block_wear)
1650 update_wear(erase_block_no);
1652 if (erase_error(erase_block_no)) {
1653 NS_WARN("simulating erase failure in erase block %u\n", erase_block_no);
1659 case ACTION_PRGPAGE:
1661 * Program page - move internal buffer data to the page.
1665 NS_WARN("do_state_action: device is write-protected, programm\n");
1669 num = ns->geom.pgszoob - ns->regs.off - ns->regs.column;
1670 if (num != ns->regs.count) {
1671 NS_ERR("do_state_action: too few bytes were input (%d instead of %d)\n",
1672 ns->regs.count, num);
1676 if (prog_page(ns, num) == -1)
1679 page_no = ns->regs.row;
1681 NS_DBG("do_state_action: copy %d bytes from int buf to (%#x, %#x), raw off = %d\n",
1682 num, ns->regs.row, ns->regs.column, NS_RAW_OFFSET(ns) + ns->regs.off);
1683 NS_LOG("programm page %d\n", ns->regs.row);
1685 NS_UDELAY(programm_delay);
1686 NS_UDELAY(output_cycle * ns->geom.pgsz / 1000 / busdiv);
1688 if (write_error(page_no)) {
1689 NS_WARN("simulating write failure in page %u\n", page_no);
1695 case ACTION_ZEROOFF:
1696 NS_DBG("do_state_action: set internal offset to 0\n");
1700 case ACTION_HALFOFF:
1701 if (!(ns->options & OPT_PAGE512_8BIT)) {
1702 NS_ERR("do_state_action: BUG! can't skip half of page for non-512"
1703 "byte page size 8x chips\n");
1706 NS_DBG("do_state_action: set internal offset to %d\n", ns->geom.pgsz/2);
1707 ns->regs.off = ns->geom.pgsz/2;
1711 NS_DBG("do_state_action: set internal offset to %d\n", ns->geom.pgsz);
1712 ns->regs.off = ns->geom.pgsz;
1716 NS_DBG("do_state_action: BUG! unknown action\n");
1723 * Switch simulator's state.
1725 static void switch_state(struct nandsim *ns)
1729 * The current operation have already been identified.
1730 * Just follow the states chain.
1734 ns->state = ns->nxstate;
1735 ns->nxstate = ns->op[ns->stateidx + 1];
1737 NS_DBG("switch_state: operation is known, switch to the next state, "
1738 "state: %s, nxstate: %s\n",
1739 get_state_name(ns->state), get_state_name(ns->nxstate));
1741 /* See, whether we need to do some action */
1742 if ((ns->state & ACTION_MASK) && do_state_action(ns, ns->state) < 0) {
1743 switch_to_ready_state(ns, NS_STATUS_FAILED(ns));
1749 * We don't yet know which operation we perform.
1750 * Try to identify it.
1754 * The only event causing the switch_state function to
1755 * be called with yet unknown operation is new command.
1757 ns->state = get_state_by_command(ns->regs.command);
1759 NS_DBG("switch_state: operation is unknown, try to find it\n");
1761 if (find_operation(ns, 0) != 0)
1764 if ((ns->state & ACTION_MASK) && do_state_action(ns, ns->state) < 0) {
1765 switch_to_ready_state(ns, NS_STATUS_FAILED(ns));
1770 /* For 16x devices column means the page offset in words */
1771 if ((ns->nxstate & STATE_ADDR_MASK) && ns->busw == 16) {
1772 NS_DBG("switch_state: double the column number for 16x device\n");
1773 ns->regs.column <<= 1;
1776 if (NS_STATE(ns->nxstate) == STATE_READY) {
1778 * The current state is the last. Return to STATE_READY
1781 u_char status = NS_STATUS_OK(ns);
1783 /* In case of data states, see if all bytes were input/output */
1784 if ((ns->state & (STATE_DATAIN_MASK | STATE_DATAOUT_MASK))
1785 && ns->regs.count != ns->regs.num) {
1786 NS_WARN("switch_state: not all bytes were processed, %d left\n",
1787 ns->regs.num - ns->regs.count);
1788 status = NS_STATUS_FAILED(ns);
1791 NS_DBG("switch_state: operation complete, switch to STATE_READY state\n");
1793 switch_to_ready_state(ns, status);
1796 } else if (ns->nxstate & (STATE_DATAIN_MASK | STATE_DATAOUT_MASK)) {
1798 * If the next state is data input/output, switch to it now
1801 ns->state = ns->nxstate;
1802 ns->nxstate = ns->op[++ns->stateidx + 1];
1803 ns->regs.num = ns->regs.count = 0;
1805 NS_DBG("switch_state: the next state is data I/O, switch, "
1806 "state: %s, nxstate: %s\n",
1807 get_state_name(ns->state), get_state_name(ns->nxstate));
1810 * Set the internal register to the count of bytes which
1811 * are expected to be input or output
1813 switch (NS_STATE(ns->state)) {
1816 ns->regs.num = ns->geom.pgszoob - ns->regs.off - ns->regs.column;
1819 case STATE_DATAOUT_ID:
1820 ns->regs.num = ns->geom.idbytes;
1823 case STATE_DATAOUT_STATUS:
1824 case STATE_DATAOUT_STATUS_M:
1825 ns->regs.count = ns->regs.num = 0;
1829 NS_ERR("switch_state: BUG! unknown data state\n");
1832 } else if (ns->nxstate & STATE_ADDR_MASK) {
1834 * If the next state is address input, set the internal
1835 * register to the number of expected address bytes
1840 switch (NS_STATE(ns->nxstate)) {
1841 case STATE_ADDR_PAGE:
1842 ns->regs.num = ns->geom.pgaddrbytes;
1845 case STATE_ADDR_SEC:
1846 ns->regs.num = ns->geom.secaddrbytes;
1849 case STATE_ADDR_ZERO:
1853 case STATE_ADDR_COLUMN:
1854 /* Column address is always 2 bytes */
1855 ns->regs.num = ns->geom.pgaddrbytes - ns->geom.secaddrbytes;
1859 NS_ERR("switch_state: BUG! unknown address state\n");
1863 * Just reset internal counters.
1871 static u_char ns_nand_read_byte(struct mtd_info *mtd)
1873 struct nandsim *ns = ((struct nand_chip *)mtd->priv)->priv;
1876 /* Sanity and correctness checks */
1877 if (!ns->lines.ce) {
1878 NS_ERR("read_byte: chip is disabled, return %#x\n", (uint)outb);
1881 if (ns->lines.ale || ns->lines.cle) {
1882 NS_ERR("read_byte: ALE or CLE pin is high, return %#x\n", (uint)outb);
1885 if (!(ns->state & STATE_DATAOUT_MASK)) {
1886 NS_WARN("read_byte: unexpected data output cycle, state is %s "
1887 "return %#x\n", get_state_name(ns->state), (uint)outb);
1891 /* Status register may be read as many times as it is wanted */
1892 if (NS_STATE(ns->state) == STATE_DATAOUT_STATUS) {
1893 NS_DBG("read_byte: return %#x status\n", ns->regs.status);
1894 return ns->regs.status;
1897 /* Check if there is any data in the internal buffer which may be read */
1898 if (ns->regs.count == ns->regs.num) {
1899 NS_WARN("read_byte: no more data to output, return %#x\n", (uint)outb);
1903 switch (NS_STATE(ns->state)) {
1905 if (ns->busw == 8) {
1906 outb = ns->buf.byte[ns->regs.count];
1907 ns->regs.count += 1;
1909 outb = (u_char)cpu_to_le16(ns->buf.word[ns->regs.count >> 1]);
1910 ns->regs.count += 2;
1913 case STATE_DATAOUT_ID:
1914 NS_DBG("read_byte: read ID byte %d, total = %d\n", ns->regs.count, ns->regs.num);
1915 outb = ns->ids[ns->regs.count];
1916 ns->regs.count += 1;
1922 if (ns->regs.count == ns->regs.num) {
1923 NS_DBG("read_byte: all bytes were read\n");
1925 if (NS_STATE(ns->nxstate) == STATE_READY)
1932 static void ns_nand_write_byte(struct mtd_info *mtd, u_char byte)
1934 struct nandsim *ns = ((struct nand_chip *)mtd->priv)->priv;
1936 /* Sanity and correctness checks */
1937 if (!ns->lines.ce) {
1938 NS_ERR("write_byte: chip is disabled, ignore write\n");
1941 if (ns->lines.ale && ns->lines.cle) {
1942 NS_ERR("write_byte: ALE and CLE pins are high simultaneously, ignore write\n");
1946 if (ns->lines.cle == 1) {
1948 * The byte written is a command.
1951 if (byte == NAND_CMD_RESET) {
1952 NS_LOG("reset chip\n");
1953 switch_to_ready_state(ns, NS_STATUS_OK(ns));
1957 /* Check that the command byte is correct */
1958 if (check_command(byte)) {
1959 NS_ERR("write_byte: unknown command %#x\n", (uint)byte);
1963 if (NS_STATE(ns->state) == STATE_DATAOUT_STATUS
1964 || NS_STATE(ns->state) == STATE_DATAOUT_STATUS_M
1965 || NS_STATE(ns->state) == STATE_DATAOUT) {
1966 int row = ns->regs.row;
1969 if (byte == NAND_CMD_RNDOUT)
1973 /* Check if chip is expecting command */
1974 if (NS_STATE(ns->nxstate) != STATE_UNKNOWN && !(ns->nxstate & STATE_CMD_MASK)) {
1975 /* Do not warn if only 2 id bytes are read */
1976 if (!(ns->regs.command == NAND_CMD_READID &&
1977 NS_STATE(ns->state) == STATE_DATAOUT_ID && ns->regs.count == 2)) {
1979 * We are in situation when something else (not command)
1980 * was expected but command was input. In this case ignore
1981 * previous command(s)/state(s) and accept the last one.
1983 NS_WARN("write_byte: command (%#x) wasn't expected, expected state is %s, "
1984 "ignore previous states\n", (uint)byte, get_state_name(ns->nxstate));
1986 switch_to_ready_state(ns, NS_STATUS_FAILED(ns));
1989 NS_DBG("command byte corresponding to %s state accepted\n",
1990 get_state_name(get_state_by_command(byte)));
1991 ns->regs.command = byte;
1994 } else if (ns->lines.ale == 1) {
1996 * The byte written is an address.
1999 if (NS_STATE(ns->nxstate) == STATE_UNKNOWN) {
2001 NS_DBG("write_byte: operation isn't known yet, identify it\n");
2003 if (find_operation(ns, 1) < 0)
2006 if ((ns->state & ACTION_MASK) && do_state_action(ns, ns->state) < 0) {
2007 switch_to_ready_state(ns, NS_STATUS_FAILED(ns));
2012 switch (NS_STATE(ns->nxstate)) {
2013 case STATE_ADDR_PAGE:
2014 ns->regs.num = ns->geom.pgaddrbytes;
2016 case STATE_ADDR_SEC:
2017 ns->regs.num = ns->geom.secaddrbytes;
2019 case STATE_ADDR_ZERO:
2027 /* Check that chip is expecting address */
2028 if (!(ns->nxstate & STATE_ADDR_MASK)) {
2029 NS_ERR("write_byte: address (%#x) isn't expected, expected state is %s, "
2030 "switch to STATE_READY\n", (uint)byte, get_state_name(ns->nxstate));
2031 switch_to_ready_state(ns, NS_STATUS_FAILED(ns));
2035 /* Check if this is expected byte */
2036 if (ns->regs.count == ns->regs.num) {
2037 NS_ERR("write_byte: no more address bytes expected\n");
2038 switch_to_ready_state(ns, NS_STATUS_FAILED(ns));
2042 accept_addr_byte(ns, byte);
2044 ns->regs.count += 1;
2046 NS_DBG("write_byte: address byte %#x was accepted (%d bytes input, %d expected)\n",
2047 (uint)byte, ns->regs.count, ns->regs.num);
2049 if (ns->regs.count == ns->regs.num) {
2050 NS_DBG("address (%#x, %#x) is accepted\n", ns->regs.row, ns->regs.column);
2056 * The byte written is an input data.
2059 /* Check that chip is expecting data input */
2060 if (!(ns->state & STATE_DATAIN_MASK)) {
2061 NS_ERR("write_byte: data input (%#x) isn't expected, state is %s, "
2062 "switch to %s\n", (uint)byte,
2063 get_state_name(ns->state), get_state_name(STATE_READY));
2064 switch_to_ready_state(ns, NS_STATUS_FAILED(ns));
2068 /* Check if this is expected byte */
2069 if (ns->regs.count == ns->regs.num) {
2070 NS_WARN("write_byte: %u input bytes has already been accepted, ignore write\n",
2075 if (ns->busw == 8) {
2076 ns->buf.byte[ns->regs.count] = byte;
2077 ns->regs.count += 1;
2079 ns->buf.word[ns->regs.count >> 1] = cpu_to_le16((uint16_t)byte);
2080 ns->regs.count += 2;
2087 static void ns_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int bitmask)
2089 struct nandsim *ns = ((struct nand_chip *)mtd->priv)->priv;
2091 ns->lines.cle = bitmask & NAND_CLE ? 1 : 0;
2092 ns->lines.ale = bitmask & NAND_ALE ? 1 : 0;
2093 ns->lines.ce = bitmask & NAND_NCE ? 1 : 0;
2095 if (cmd != NAND_CMD_NONE)
2096 ns_nand_write_byte(mtd, cmd);
2099 static int ns_device_ready(struct mtd_info *mtd)
2101 NS_DBG("device_ready\n");
2105 static uint16_t ns_nand_read_word(struct mtd_info *mtd)
2107 struct nand_chip *chip = (struct nand_chip *)mtd->priv;
2109 NS_DBG("read_word\n");
2111 return chip->read_byte(mtd) | (chip->read_byte(mtd) << 8);
2114 static void ns_nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
2116 struct nandsim *ns = ((struct nand_chip *)mtd->priv)->priv;
2118 /* Check that chip is expecting data input */
2119 if (!(ns->state & STATE_DATAIN_MASK)) {
2120 NS_ERR("write_buf: data input isn't expected, state is %s, "
2121 "switch to STATE_READY\n", get_state_name(ns->state));
2122 switch_to_ready_state(ns, NS_STATUS_FAILED(ns));
2126 /* Check if these are expected bytes */
2127 if (ns->regs.count + len > ns->regs.num) {
2128 NS_ERR("write_buf: too many input bytes\n");
2129 switch_to_ready_state(ns, NS_STATUS_FAILED(ns));
2133 memcpy(ns->buf.byte + ns->regs.count, buf, len);
2134 ns->regs.count += len;
2136 if (ns->regs.count == ns->regs.num) {
2137 NS_DBG("write_buf: %d bytes were written\n", ns->regs.count);
2141 static void ns_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
2143 struct nandsim *ns = ((struct nand_chip *)mtd->priv)->priv;
2145 /* Sanity and correctness checks */
2146 if (!ns->lines.ce) {
2147 NS_ERR("read_buf: chip is disabled\n");
2150 if (ns->lines.ale || ns->lines.cle) {
2151 NS_ERR("read_buf: ALE or CLE pin is high\n");
2154 if (!(ns->state & STATE_DATAOUT_MASK)) {
2155 NS_WARN("read_buf: unexpected data output cycle, current state is %s\n",
2156 get_state_name(ns->state));
2160 if (NS_STATE(ns->state) != STATE_DATAOUT) {
2163 for (i = 0; i < len; i++)
2164 buf[i] = ((struct nand_chip *)mtd->priv)->read_byte(mtd);
2169 /* Check if these are expected bytes */
2170 if (ns->regs.count + len > ns->regs.num) {
2171 NS_ERR("read_buf: too many bytes to read\n");
2172 switch_to_ready_state(ns, NS_STATUS_FAILED(ns));
2176 memcpy(buf, ns->buf.byte + ns->regs.count, len);
2177 ns->regs.count += len;
2179 if (ns->regs.count == ns->regs.num) {
2180 if (NS_STATE(ns->nxstate) == STATE_READY)
2188 * Module initialization function
2190 static int __init ns_init_module(void)
2192 struct nand_chip *chip;
2193 struct nandsim *nand;
2194 int retval = -ENOMEM, i;
2196 if (bus_width != 8 && bus_width != 16) {
2197 NS_ERR("wrong bus width (%d), use only 8 or 16\n", bus_width);
2201 /* Allocate and initialize mtd_info, nand_chip and nandsim structures */
2202 nsmtd = kzalloc(sizeof(struct mtd_info) + sizeof(struct nand_chip)
2203 + sizeof(struct nandsim), GFP_KERNEL);
2205 NS_ERR("unable to allocate core structures.\n");
2208 chip = (struct nand_chip *)(nsmtd + 1);
2209 nsmtd->priv = (void *)chip;
2210 nand = (struct nandsim *)(chip + 1);
2211 chip->priv = (void *)nand;
2214 * Register simulator's callbacks.
2216 chip->cmd_ctrl = ns_hwcontrol;
2217 chip->read_byte = ns_nand_read_byte;
2218 chip->dev_ready = ns_device_ready;
2219 chip->write_buf = ns_nand_write_buf;
2220 chip->read_buf = ns_nand_read_buf;
2221 chip->read_word = ns_nand_read_word;
2222 chip->ecc.mode = NAND_ECC_SOFT;
2223 /* The NAND_SKIP_BBTSCAN option is necessary for 'overridesize' */
2224 /* and 'badblocks' parameters to work */
2225 chip->options |= NAND_SKIP_BBTSCAN;
2229 chip->bbt_options |= NAND_BBT_NO_OOB;
2231 chip->bbt_options |= NAND_BBT_USE_FLASH;
2235 NS_ERR("bbt has to be 0..2\n");
2240 * Perform minimum nandsim structure initialization to handle
2241 * the initial ID read command correctly
2243 if (third_id_byte != 0xFF || fourth_id_byte != 0xFF)
2244 nand->geom.idbytes = 4;
2246 nand->geom.idbytes = 2;
2247 nand->regs.status = NS_STATUS_OK(nand);
2248 nand->nxstate = STATE_UNKNOWN;
2249 nand->options |= OPT_PAGE256; /* temporary value */
2250 nand->ids[0] = first_id_byte;
2251 nand->ids[1] = second_id_byte;
2252 nand->ids[2] = third_id_byte;
2253 nand->ids[3] = fourth_id_byte;
2254 if (bus_width == 16) {
2256 chip->options |= NAND_BUSWIDTH_16;
2259 nsmtd->owner = THIS_MODULE;
2261 if ((retval = parse_weakblocks()) != 0)
2264 if ((retval = parse_weakpages()) != 0)
2267 if ((retval = parse_gravepages()) != 0)
2270 retval = nand_scan_ident(nsmtd, 1, NULL);
2272 NS_ERR("cannot scan NAND Simulator device\n");
2279 unsigned int eccsteps, eccbytes;
2280 if (!mtd_nand_has_bch()) {
2281 NS_ERR("BCH ECC support is disabled\n");
2285 /* use 512-byte ecc blocks */
2286 eccsteps = nsmtd->writesize/512;
2287 eccbytes = (bch*13+7)/8;
2288 /* do not bother supporting small page devices */
2289 if ((nsmtd->oobsize < 64) || !eccsteps) {
2290 NS_ERR("bch not available on small page devices\n");
2294 if ((eccbytes*eccsteps+2) > nsmtd->oobsize) {
2295 NS_ERR("invalid bch value %u\n", bch);
2299 chip->ecc.mode = NAND_ECC_SOFT_BCH;
2300 chip->ecc.size = 512;
2301 chip->ecc.bytes = eccbytes;
2302 NS_INFO("using %u-bit/%u bytes BCH ECC\n", bch, chip->ecc.size);
2305 retval = nand_scan_tail(nsmtd);
2307 NS_ERR("can't register NAND Simulator\n");
2314 uint64_t new_size = (uint64_t)nsmtd->erasesize << overridesize;
2315 if (new_size >> overridesize != nsmtd->erasesize) {
2316 NS_ERR("overridesize is too big\n");
2320 /* N.B. This relies on nand_scan not doing anything with the size before we change it */
2321 nsmtd->size = new_size;
2322 chip->chipsize = new_size;
2323 chip->chip_shift = ffs(nsmtd->erasesize) + overridesize - 1;
2324 chip->pagemask = (chip->chipsize >> chip->page_shift) - 1;
2327 if ((retval = setup_wear_reporting(nsmtd)) != 0)
2330 if ((retval = init_nandsim(nsmtd)) != 0)
2333 if ((retval = nand_default_bbt(nsmtd)) != 0)
2336 if ((retval = parse_badblocks(nand, nsmtd)) != 0)
2339 /* Register NAND partitions */
2340 retval = mtd_device_register(nsmtd, &nand->partitions[0],
2349 nand_release(nsmtd);
2350 for (i = 0;i < ARRAY_SIZE(nand->partitions); ++i)
2351 kfree(nand->partitions[i].name);
2359 module_init(ns_init_module);
2362 * Module clean-up function
2364 static void __exit ns_cleanup_module(void)
2366 struct nandsim *ns = ((struct nand_chip *)nsmtd->priv)->priv;
2369 free_nandsim(ns); /* Free nandsim private resources */
2370 nand_release(nsmtd); /* Unregister driver */
2371 for (i = 0;i < ARRAY_SIZE(ns->partitions); ++i)
2372 kfree(ns->partitions[i].name);
2373 kfree(nsmtd); /* Free other structures */
2377 module_exit(ns_cleanup_module);
2379 MODULE_LICENSE ("GPL");
2380 MODULE_AUTHOR ("Artem B. Bityuckiy");
2381 MODULE_DESCRIPTION ("The NAND flash simulator");