2 * originally based on the dummy device.
4 * Copyright 1999, Thomas Davis, tadavis@lbl.gov.
5 * Licensed under the GPL. Based on dummy.c, and eql.c devices.
7 * bonding.c: an Ethernet Bonding driver
9 * This is useful to talk to a Cisco EtherChannel compatible equipment:
11 * Sun Trunking (Solaris)
12 * Alteon AceDirector Trunks
14 * and probably many L2 switches ...
17 * ifconfig bond0 ipaddress netmask up
18 * will setup a network device, with an ip address. No mac address
19 * will be assigned at this time. The hw mac address will come from
20 * the first slave bonded to the channel. All slaves will then use
21 * this hw mac address.
24 * will release all slaves, marking them as down.
26 * ifenslave bond0 eth0
27 * will attach eth0 to bond0 as a slave. eth0 hw mac address will either
28 * a: be used as initial mac address
29 * b: if a hw mac address already is there, eth0's hw mac address
30 * will then be set from bond0.
34 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
36 #include <linux/kernel.h>
37 #include <linux/module.h>
38 #include <linux/types.h>
39 #include <linux/fcntl.h>
40 #include <linux/interrupt.h>
41 #include <linux/ptrace.h>
42 #include <linux/ioport.h>
46 #include <linux/tcp.h>
47 #include <linux/udp.h>
48 #include <linux/slab.h>
49 #include <linux/string.h>
50 #include <linux/init.h>
51 #include <linux/timer.h>
52 #include <linux/socket.h>
53 #include <linux/ctype.h>
54 #include <linux/inet.h>
55 #include <linux/bitops.h>
58 #include <linux/uaccess.h>
59 #include <linux/errno.h>
60 #include <linux/netdevice.h>
61 #include <linux/inetdevice.h>
62 #include <linux/igmp.h>
63 #include <linux/etherdevice.h>
64 #include <linux/skbuff.h>
66 #include <linux/rtnetlink.h>
67 #include <linux/smp.h>
68 #include <linux/if_ether.h>
70 #include <linux/mii.h>
71 #include <linux/ethtool.h>
72 #include <linux/if_vlan.h>
73 #include <linux/if_bonding.h>
74 #include <linux/jiffies.h>
75 #include <linux/preempt.h>
76 #include <net/route.h>
77 #include <net/net_namespace.h>
78 #include <net/netns/generic.h>
79 #include <net/pkt_sched.h>
84 /*---------------------------- Module parameters ----------------------------*/
86 /* monitor all links that often (in milliseconds). <=0 disables monitoring */
87 #define BOND_LINK_MON_INTERV 0
88 #define BOND_LINK_ARP_INTERV 0
90 static int max_bonds = BOND_DEFAULT_MAX_BONDS;
91 static int tx_queues = BOND_DEFAULT_TX_QUEUES;
92 static int num_peer_notif = 1;
93 static int miimon = BOND_LINK_MON_INTERV;
96 static int use_carrier = 1;
99 static char *primary_reselect;
100 static char *lacp_rate;
101 static int min_links;
102 static char *ad_select;
103 static char *xmit_hash_policy;
104 static int arp_interval = BOND_LINK_ARP_INTERV;
105 static char *arp_ip_target[BOND_MAX_ARP_TARGETS];
106 static char *arp_validate;
107 static char *arp_all_targets;
108 static char *fail_over_mac;
109 static int all_slaves_active = 0;
110 static struct bond_params bonding_defaults;
111 static int resend_igmp = BOND_DEFAULT_RESEND_IGMP;
113 module_param(max_bonds, int, 0);
114 MODULE_PARM_DESC(max_bonds, "Max number of bonded devices");
115 module_param(tx_queues, int, 0);
116 MODULE_PARM_DESC(tx_queues, "Max number of transmit queues (default = 16)");
117 module_param_named(num_grat_arp, num_peer_notif, int, 0644);
118 MODULE_PARM_DESC(num_grat_arp, "Number of peer notifications to send on "
119 "failover event (alias of num_unsol_na)");
120 module_param_named(num_unsol_na, num_peer_notif, int, 0644);
121 MODULE_PARM_DESC(num_unsol_na, "Number of peer notifications to send on "
122 "failover event (alias of num_grat_arp)");
123 module_param(miimon, int, 0);
124 MODULE_PARM_DESC(miimon, "Link check interval in milliseconds");
125 module_param(updelay, int, 0);
126 MODULE_PARM_DESC(updelay, "Delay before considering link up, in milliseconds");
127 module_param(downdelay, int, 0);
128 MODULE_PARM_DESC(downdelay, "Delay before considering link down, "
130 module_param(use_carrier, int, 0);
131 MODULE_PARM_DESC(use_carrier, "Use netif_carrier_ok (vs MII ioctls) in miimon; "
132 "0 for off, 1 for on (default)");
133 module_param(mode, charp, 0);
134 MODULE_PARM_DESC(mode, "Mode of operation; 0 for balance-rr, "
135 "1 for active-backup, 2 for balance-xor, "
136 "3 for broadcast, 4 for 802.3ad, 5 for balance-tlb, "
137 "6 for balance-alb");
138 module_param(primary, charp, 0);
139 MODULE_PARM_DESC(primary, "Primary network device to use");
140 module_param(primary_reselect, charp, 0);
141 MODULE_PARM_DESC(primary_reselect, "Reselect primary slave "
143 "0 for always (default), "
144 "1 for only if speed of primary is "
146 "2 for only on active slave "
148 module_param(lacp_rate, charp, 0);
149 MODULE_PARM_DESC(lacp_rate, "LACPDU tx rate to request from 802.3ad partner; "
150 "0 for slow, 1 for fast");
151 module_param(ad_select, charp, 0);
152 MODULE_PARM_DESC(ad_select, "803.ad aggregation selection logic; "
153 "0 for stable (default), 1 for bandwidth, "
155 module_param(min_links, int, 0);
156 MODULE_PARM_DESC(min_links, "Minimum number of available links before turning on carrier");
158 module_param(xmit_hash_policy, charp, 0);
159 MODULE_PARM_DESC(xmit_hash_policy, "balance-xor and 802.3ad hashing method; "
160 "0 for layer 2 (default), 1 for layer 3+4, "
162 module_param(arp_interval, int, 0);
163 MODULE_PARM_DESC(arp_interval, "arp interval in milliseconds");
164 module_param_array(arp_ip_target, charp, NULL, 0);
165 MODULE_PARM_DESC(arp_ip_target, "arp targets in n.n.n.n form");
166 module_param(arp_validate, charp, 0);
167 MODULE_PARM_DESC(arp_validate, "validate src/dst of ARP probes; "
168 "0 for none (default), 1 for active, "
169 "2 for backup, 3 for all");
170 module_param(arp_all_targets, charp, 0);
171 MODULE_PARM_DESC(arp_all_targets, "fail on any/all arp targets timeout; 0 for any (default), 1 for all");
172 module_param(fail_over_mac, charp, 0);
173 MODULE_PARM_DESC(fail_over_mac, "For active-backup, do not set all slaves to "
174 "the same MAC; 0 for none (default), "
175 "1 for active, 2 for follow");
176 module_param(all_slaves_active, int, 0);
177 MODULE_PARM_DESC(all_slaves_active, "Keep all frames received on an interface"
178 "by setting active flag for all slaves; "
179 "0 for never (default), 1 for always.");
180 module_param(resend_igmp, int, 0);
181 MODULE_PARM_DESC(resend_igmp, "Number of IGMP membership reports to send on "
184 /*----------------------------- Global variables ----------------------------*/
186 #ifdef CONFIG_NET_POLL_CONTROLLER
187 atomic_t netpoll_block_tx = ATOMIC_INIT(0);
190 int bond_net_id __read_mostly;
192 static __be32 arp_target[BOND_MAX_ARP_TARGETS];
193 static int arp_ip_count;
194 static int bond_mode = BOND_MODE_ROUNDROBIN;
195 static int xmit_hashtype = BOND_XMIT_POLICY_LAYER2;
196 static int lacp_fast;
198 const struct bond_parm_tbl bond_lacp_tbl[] = {
199 { "slow", AD_LACP_SLOW},
200 { "fast", AD_LACP_FAST},
204 const struct bond_parm_tbl bond_mode_tbl[] = {
205 { "balance-rr", BOND_MODE_ROUNDROBIN},
206 { "active-backup", BOND_MODE_ACTIVEBACKUP},
207 { "balance-xor", BOND_MODE_XOR},
208 { "broadcast", BOND_MODE_BROADCAST},
209 { "802.3ad", BOND_MODE_8023AD},
210 { "balance-tlb", BOND_MODE_TLB},
211 { "balance-alb", BOND_MODE_ALB},
215 const struct bond_parm_tbl xmit_hashtype_tbl[] = {
216 { "layer2", BOND_XMIT_POLICY_LAYER2},
217 { "layer3+4", BOND_XMIT_POLICY_LAYER34},
218 { "layer2+3", BOND_XMIT_POLICY_LAYER23},
222 const struct bond_parm_tbl arp_all_targets_tbl[] = {
223 { "any", BOND_ARP_TARGETS_ANY},
224 { "all", BOND_ARP_TARGETS_ALL},
228 const struct bond_parm_tbl arp_validate_tbl[] = {
229 { "none", BOND_ARP_VALIDATE_NONE},
230 { "active", BOND_ARP_VALIDATE_ACTIVE},
231 { "backup", BOND_ARP_VALIDATE_BACKUP},
232 { "all", BOND_ARP_VALIDATE_ALL},
236 const struct bond_parm_tbl fail_over_mac_tbl[] = {
237 { "none", BOND_FOM_NONE},
238 { "active", BOND_FOM_ACTIVE},
239 { "follow", BOND_FOM_FOLLOW},
243 const struct bond_parm_tbl pri_reselect_tbl[] = {
244 { "always", BOND_PRI_RESELECT_ALWAYS},
245 { "better", BOND_PRI_RESELECT_BETTER},
246 { "failure", BOND_PRI_RESELECT_FAILURE},
250 struct bond_parm_tbl ad_select_tbl[] = {
251 { "stable", BOND_AD_STABLE},
252 { "bandwidth", BOND_AD_BANDWIDTH},
253 { "count", BOND_AD_COUNT},
257 /*-------------------------- Forward declarations ---------------------------*/
259 static int bond_init(struct net_device *bond_dev);
260 static void bond_uninit(struct net_device *bond_dev);
262 /*---------------------------- General routines -----------------------------*/
264 const char *bond_mode_name(int mode)
266 static const char *names[] = {
267 [BOND_MODE_ROUNDROBIN] = "load balancing (round-robin)",
268 [BOND_MODE_ACTIVEBACKUP] = "fault-tolerance (active-backup)",
269 [BOND_MODE_XOR] = "load balancing (xor)",
270 [BOND_MODE_BROADCAST] = "fault-tolerance (broadcast)",
271 [BOND_MODE_8023AD] = "IEEE 802.3ad Dynamic link aggregation",
272 [BOND_MODE_TLB] = "transmit load balancing",
273 [BOND_MODE_ALB] = "adaptive load balancing",
276 if (mode < 0 || mode > BOND_MODE_ALB)
282 /*---------------------------------- VLAN -----------------------------------*/
285 * bond_add_vlan - add a new vlan id on bond
286 * @bond: bond that got the notification
287 * @vlan_id: the vlan id to add
289 * Returns -ENOMEM if allocation failed.
291 static int bond_add_vlan(struct bonding *bond, unsigned short vlan_id)
293 struct vlan_entry *vlan;
295 pr_debug("bond: %s, vlan id %d\n",
296 (bond ? bond->dev->name : "None"), vlan_id);
298 vlan = kzalloc(sizeof(struct vlan_entry), GFP_KERNEL);
302 INIT_LIST_HEAD(&vlan->vlan_list);
303 vlan->vlan_id = vlan_id;
305 write_lock_bh(&bond->lock);
307 list_add_tail(&vlan->vlan_list, &bond->vlan_list);
309 write_unlock_bh(&bond->lock);
311 pr_debug("added VLAN ID %d on bond %s\n", vlan_id, bond->dev->name);
317 * bond_del_vlan - delete a vlan id from bond
318 * @bond: bond that got the notification
319 * @vlan_id: the vlan id to delete
321 * returns -ENODEV if @vlan_id was not found in @bond.
323 static int bond_del_vlan(struct bonding *bond, unsigned short vlan_id)
325 struct vlan_entry *vlan;
328 pr_debug("bond: %s, vlan id %d\n", bond->dev->name, vlan_id);
331 write_lock_bh(&bond->lock);
333 list_for_each_entry(vlan, &bond->vlan_list, vlan_list) {
334 if (vlan->vlan_id == vlan_id) {
335 list_del(&vlan->vlan_list);
337 if (bond_is_lb(bond))
338 bond_alb_clear_vlan(bond, vlan_id);
340 pr_debug("removed VLAN ID %d from bond %s\n",
341 vlan_id, bond->dev->name);
350 pr_debug("couldn't find VLAN ID %d in bond %s\n",
351 vlan_id, bond->dev->name);
354 write_unlock_bh(&bond->lock);
355 unblock_netpoll_tx();
360 * bond_next_vlan - safely skip to the next item in the vlans list.
361 * @bond: the bond we're working on
362 * @curr: item we're advancing from
364 * Returns %NULL if list is empty, bond->next_vlan if @curr is %NULL,
365 * or @curr->next otherwise (even if it is @curr itself again).
367 * Caller must hold bond->lock
369 struct vlan_entry *bond_next_vlan(struct bonding *bond, struct vlan_entry *curr)
371 struct vlan_entry *next, *last;
373 if (list_empty(&bond->vlan_list))
377 next = list_entry(bond->vlan_list.next,
378 struct vlan_entry, vlan_list);
380 last = list_entry(bond->vlan_list.prev,
381 struct vlan_entry, vlan_list);
383 next = list_entry(bond->vlan_list.next,
384 struct vlan_entry, vlan_list);
386 next = list_entry(curr->vlan_list.next,
387 struct vlan_entry, vlan_list);
395 * bond_dev_queue_xmit - Prepare skb for xmit.
397 * @bond: bond device that got this skb for tx.
398 * @skb: hw accel VLAN tagged skb to transmit
399 * @slave_dev: slave that is supposed to xmit this skbuff
401 int bond_dev_queue_xmit(struct bonding *bond, struct sk_buff *skb,
402 struct net_device *slave_dev)
404 skb->dev = slave_dev;
406 BUILD_BUG_ON(sizeof(skb->queue_mapping) !=
407 sizeof(qdisc_skb_cb(skb)->slave_dev_queue_mapping));
408 skb->queue_mapping = qdisc_skb_cb(skb)->slave_dev_queue_mapping;
410 if (unlikely(netpoll_tx_running(bond->dev)))
411 bond_netpoll_send_skb(bond_get_slave_by_dev(bond, slave_dev), skb);
419 * In the following 2 functions, bond_vlan_rx_add_vid and bond_vlan_rx_kill_vid,
420 * We don't protect the slave list iteration with a lock because:
421 * a. This operation is performed in IOCTL context,
422 * b. The operation is protected by the RTNL semaphore in the 8021q code,
423 * c. Holding a lock with BH disabled while directly calling a base driver
424 * entry point is generally a BAD idea.
426 * The design of synchronization/protection for this operation in the 8021q
427 * module is good for one or more VLAN devices over a single physical device
428 * and cannot be extended for a teaming solution like bonding, so there is a
429 * potential race condition here where a net device from the vlan group might
430 * be referenced (either by a base driver or the 8021q code) while it is being
431 * removed from the system. However, it turns out we're not making matters
432 * worse, and if it works for regular VLAN usage it will work here too.
436 * bond_vlan_rx_add_vid - Propagates adding an id to slaves
437 * @bond_dev: bonding net device that got called
438 * @vid: vlan id being added
440 static int bond_vlan_rx_add_vid(struct net_device *bond_dev,
441 __be16 proto, u16 vid)
443 struct bonding *bond = netdev_priv(bond_dev);
444 struct slave *slave, *stop_at;
447 bond_for_each_slave(bond, slave, i) {
448 res = vlan_vid_add(slave->dev, proto, vid);
453 res = bond_add_vlan(bond, vid);
455 pr_err("%s: Error: Failed to add vlan id %d\n",
456 bond_dev->name, vid);
463 /* unwind from head to the slave that failed */
465 bond_for_each_slave_from_to(bond, slave, i, bond->first_slave, stop_at)
466 vlan_vid_del(slave->dev, proto, vid);
472 * bond_vlan_rx_kill_vid - Propagates deleting an id to slaves
473 * @bond_dev: bonding net device that got called
474 * @vid: vlan id being removed
476 static int bond_vlan_rx_kill_vid(struct net_device *bond_dev,
477 __be16 proto, u16 vid)
479 struct bonding *bond = netdev_priv(bond_dev);
483 bond_for_each_slave(bond, slave, i)
484 vlan_vid_del(slave->dev, proto, vid);
486 res = bond_del_vlan(bond, vid);
488 pr_err("%s: Error: Failed to remove vlan id %d\n",
489 bond_dev->name, vid);
496 static void bond_add_vlans_on_slave(struct bonding *bond, struct net_device *slave_dev)
498 struct vlan_entry *vlan;
501 list_for_each_entry(vlan, &bond->vlan_list, vlan_list) {
502 res = vlan_vid_add(slave_dev, htons(ETH_P_8021Q),
505 pr_warning("%s: Failed to add vlan id %d to device %s\n",
506 bond->dev->name, vlan->vlan_id,
511 static void bond_del_vlans_from_slave(struct bonding *bond,
512 struct net_device *slave_dev)
514 struct vlan_entry *vlan;
516 list_for_each_entry(vlan, &bond->vlan_list, vlan_list) {
519 vlan_vid_del(slave_dev, htons(ETH_P_8021Q), vlan->vlan_id);
523 /*------------------------------- Link status -------------------------------*/
526 * Set the carrier state for the master according to the state of its
527 * slaves. If any slaves are up, the master is up. In 802.3ad mode,
528 * do special 802.3ad magic.
530 * Returns zero if carrier state does not change, nonzero if it does.
532 static int bond_set_carrier(struct bonding *bond)
537 if (bond->slave_cnt == 0)
540 if (bond->params.mode == BOND_MODE_8023AD)
541 return bond_3ad_set_carrier(bond);
543 bond_for_each_slave(bond, slave, i) {
544 if (slave->link == BOND_LINK_UP) {
545 if (!netif_carrier_ok(bond->dev)) {
546 netif_carrier_on(bond->dev);
554 if (netif_carrier_ok(bond->dev)) {
555 netif_carrier_off(bond->dev);
562 * Get link speed and duplex from the slave's base driver
563 * using ethtool. If for some reason the call fails or the
564 * values are invalid, set speed and duplex to -1,
567 static void bond_update_speed_duplex(struct slave *slave)
569 struct net_device *slave_dev = slave->dev;
570 struct ethtool_cmd ecmd;
574 slave->speed = SPEED_UNKNOWN;
575 slave->duplex = DUPLEX_UNKNOWN;
577 res = __ethtool_get_settings(slave_dev, &ecmd);
581 slave_speed = ethtool_cmd_speed(&ecmd);
582 if (slave_speed == 0 || slave_speed == ((__u32) -1))
585 switch (ecmd.duplex) {
593 slave->speed = slave_speed;
594 slave->duplex = ecmd.duplex;
600 * if <dev> supports MII link status reporting, check its link status.
602 * We either do MII/ETHTOOL ioctls, or check netif_carrier_ok(),
603 * depending upon the setting of the use_carrier parameter.
605 * Return either BMSR_LSTATUS, meaning that the link is up (or we
606 * can't tell and just pretend it is), or 0, meaning that the link is
609 * If reporting is non-zero, instead of faking link up, return -1 if
610 * both ETHTOOL and MII ioctls fail (meaning the device does not
611 * support them). If use_carrier is set, return whatever it says.
612 * It'd be nice if there was a good way to tell if a driver supports
613 * netif_carrier, but there really isn't.
615 static int bond_check_dev_link(struct bonding *bond,
616 struct net_device *slave_dev, int reporting)
618 const struct net_device_ops *slave_ops = slave_dev->netdev_ops;
619 int (*ioctl)(struct net_device *, struct ifreq *, int);
621 struct mii_ioctl_data *mii;
623 if (!reporting && !netif_running(slave_dev))
626 if (bond->params.use_carrier)
627 return netif_carrier_ok(slave_dev) ? BMSR_LSTATUS : 0;
629 /* Try to get link status using Ethtool first. */
630 if (slave_dev->ethtool_ops->get_link)
631 return slave_dev->ethtool_ops->get_link(slave_dev) ?
634 /* Ethtool can't be used, fallback to MII ioctls. */
635 ioctl = slave_ops->ndo_do_ioctl;
637 /* TODO: set pointer to correct ioctl on a per team member */
638 /* bases to make this more efficient. that is, once */
639 /* we determine the correct ioctl, we will always */
640 /* call it and not the others for that team */
644 * We cannot assume that SIOCGMIIPHY will also read a
645 * register; not all network drivers (e.g., e100)
649 /* Yes, the mii is overlaid on the ifreq.ifr_ifru */
650 strncpy(ifr.ifr_name, slave_dev->name, IFNAMSIZ);
652 if (IOCTL(slave_dev, &ifr, SIOCGMIIPHY) == 0) {
653 mii->reg_num = MII_BMSR;
654 if (IOCTL(slave_dev, &ifr, SIOCGMIIREG) == 0)
655 return mii->val_out & BMSR_LSTATUS;
660 * If reporting, report that either there's no dev->do_ioctl,
661 * or both SIOCGMIIREG and get_link failed (meaning that we
662 * cannot report link status). If not reporting, pretend
665 return reporting ? -1 : BMSR_LSTATUS;
668 /*----------------------------- Multicast list ------------------------------*/
671 * Push the promiscuity flag down to appropriate slaves
673 static int bond_set_promiscuity(struct bonding *bond, int inc)
676 if (USES_PRIMARY(bond->params.mode)) {
677 /* write lock already acquired */
678 if (bond->curr_active_slave) {
679 err = dev_set_promiscuity(bond->curr_active_slave->dev,
685 bond_for_each_slave(bond, slave, i) {
686 err = dev_set_promiscuity(slave->dev, inc);
695 * Push the allmulti flag down to all slaves
697 static int bond_set_allmulti(struct bonding *bond, int inc)
700 if (USES_PRIMARY(bond->params.mode)) {
701 /* write lock already acquired */
702 if (bond->curr_active_slave) {
703 err = dev_set_allmulti(bond->curr_active_slave->dev,
709 bond_for_each_slave(bond, slave, i) {
710 err = dev_set_allmulti(slave->dev, inc);
719 * Retrieve the list of registered multicast addresses for the bonding
720 * device and retransmit an IGMP JOIN request to the current active
723 static void bond_resend_igmp_join_requests(struct bonding *bond)
725 if (!rtnl_trylock()) {
726 queue_delayed_work(bond->wq, &bond->mcast_work, 0);
729 call_netdevice_notifiers(NETDEV_RESEND_IGMP, bond->dev);
732 /* We use curr_slave_lock to protect against concurrent access to
733 * igmp_retrans from multiple running instances of this function and
734 * bond_change_active_slave
736 write_lock_bh(&bond->curr_slave_lock);
737 if (bond->igmp_retrans > 1) {
738 bond->igmp_retrans--;
739 queue_delayed_work(bond->wq, &bond->mcast_work, HZ/5);
741 write_unlock_bh(&bond->curr_slave_lock);
742 read_unlock(&bond->lock);
745 static void bond_resend_igmp_join_requests_delayed(struct work_struct *work)
747 struct bonding *bond = container_of(work, struct bonding,
750 bond_resend_igmp_join_requests(bond);
753 /* Flush bond's hardware addresses from slave
755 static void bond_hw_addr_flush(struct net_device *bond_dev,
756 struct net_device *slave_dev)
758 struct bonding *bond = netdev_priv(bond_dev);
760 dev_uc_unsync(slave_dev, bond_dev);
761 dev_mc_unsync(slave_dev, bond_dev);
763 if (bond->params.mode == BOND_MODE_8023AD) {
764 /* del lacpdu mc addr from mc list */
765 u8 lacpdu_multicast[ETH_ALEN] = MULTICAST_LACPDU_ADDR;
767 dev_mc_del(slave_dev, lacpdu_multicast);
771 /*--------------------------- Active slave change ---------------------------*/
773 /* Update the hardware address list and promisc/allmulti for the new and
774 * old active slaves (if any). Modes that are !USES_PRIMARY keep all
775 * slaves up date at all times; only the USES_PRIMARY modes need to call
776 * this function to swap these settings during a failover.
778 static void bond_hw_addr_swap(struct bonding *bond, struct slave *new_active,
779 struct slave *old_active)
782 if (bond->dev->flags & IFF_PROMISC)
783 dev_set_promiscuity(old_active->dev, -1);
785 if (bond->dev->flags & IFF_ALLMULTI)
786 dev_set_allmulti(old_active->dev, -1);
788 bond_hw_addr_flush(bond->dev, old_active->dev);
792 /* FIXME: Signal errors upstream. */
793 if (bond->dev->flags & IFF_PROMISC)
794 dev_set_promiscuity(new_active->dev, 1);
796 if (bond->dev->flags & IFF_ALLMULTI)
797 dev_set_allmulti(new_active->dev, 1);
799 netif_addr_lock_bh(bond->dev);
800 dev_uc_sync(new_active->dev, bond->dev);
801 dev_mc_sync(new_active->dev, bond->dev);
802 netif_addr_unlock_bh(bond->dev);
807 * bond_set_dev_addr - clone slave's address to bond
808 * @bond_dev: bond net device
809 * @slave_dev: slave net device
811 * Should be called with RTNL held.
813 static void bond_set_dev_addr(struct net_device *bond_dev,
814 struct net_device *slave_dev)
816 pr_debug("bond_dev=%p slave_dev=%p slave_dev->addr_len=%d\n",
817 bond_dev, slave_dev, slave_dev->addr_len);
818 memcpy(bond_dev->dev_addr, slave_dev->dev_addr, slave_dev->addr_len);
819 bond_dev->addr_assign_type = NET_ADDR_STOLEN;
820 call_netdevice_notifiers(NETDEV_CHANGEADDR, bond_dev);
824 * bond_do_fail_over_mac
826 * Perform special MAC address swapping for fail_over_mac settings
828 * Called with RTNL, bond->lock for read, curr_slave_lock for write_bh.
830 static void bond_do_fail_over_mac(struct bonding *bond,
831 struct slave *new_active,
832 struct slave *old_active)
833 __releases(&bond->curr_slave_lock)
834 __releases(&bond->lock)
835 __acquires(&bond->lock)
836 __acquires(&bond->curr_slave_lock)
838 u8 tmp_mac[ETH_ALEN];
839 struct sockaddr saddr;
842 switch (bond->params.fail_over_mac) {
843 case BOND_FOM_ACTIVE:
845 write_unlock_bh(&bond->curr_slave_lock);
846 read_unlock(&bond->lock);
847 bond_set_dev_addr(bond->dev, new_active->dev);
848 read_lock(&bond->lock);
849 write_lock_bh(&bond->curr_slave_lock);
852 case BOND_FOM_FOLLOW:
854 * if new_active && old_active, swap them
855 * if just old_active, do nothing (going to no active slave)
856 * if just new_active, set new_active to bond's MAC
861 write_unlock_bh(&bond->curr_slave_lock);
862 read_unlock(&bond->lock);
865 memcpy(tmp_mac, new_active->dev->dev_addr, ETH_ALEN);
866 memcpy(saddr.sa_data, old_active->dev->dev_addr,
868 saddr.sa_family = new_active->dev->type;
870 memcpy(saddr.sa_data, bond->dev->dev_addr, ETH_ALEN);
871 saddr.sa_family = bond->dev->type;
874 rv = dev_set_mac_address(new_active->dev, &saddr);
876 pr_err("%s: Error %d setting MAC of slave %s\n",
877 bond->dev->name, -rv, new_active->dev->name);
884 memcpy(saddr.sa_data, tmp_mac, ETH_ALEN);
885 saddr.sa_family = old_active->dev->type;
887 rv = dev_set_mac_address(old_active->dev, &saddr);
889 pr_err("%s: Error %d setting MAC of slave %s\n",
890 bond->dev->name, -rv, new_active->dev->name);
892 read_lock(&bond->lock);
893 write_lock_bh(&bond->curr_slave_lock);
896 pr_err("%s: bond_do_fail_over_mac impossible: bad policy %d\n",
897 bond->dev->name, bond->params.fail_over_mac);
903 static bool bond_should_change_active(struct bonding *bond)
905 struct slave *prim = bond->primary_slave;
906 struct slave *curr = bond->curr_active_slave;
908 if (!prim || !curr || curr->link != BOND_LINK_UP)
910 if (bond->force_primary) {
911 bond->force_primary = false;
914 if (bond->params.primary_reselect == BOND_PRI_RESELECT_BETTER &&
915 (prim->speed < curr->speed ||
916 (prim->speed == curr->speed && prim->duplex <= curr->duplex)))
918 if (bond->params.primary_reselect == BOND_PRI_RESELECT_FAILURE)
924 * find_best_interface - select the best available slave to be the active one
925 * @bond: our bonding struct
927 * Warning: Caller must hold curr_slave_lock for writing.
929 static struct slave *bond_find_best_slave(struct bonding *bond)
931 struct slave *new_active, *old_active;
932 struct slave *bestslave = NULL;
933 int mintime = bond->params.updelay;
936 new_active = bond->curr_active_slave;
938 if (!new_active) { /* there were no active slaves left */
939 if (bond->slave_cnt > 0) /* found one slave */
940 new_active = bond->first_slave;
942 return NULL; /* still no slave, return NULL */
945 if ((bond->primary_slave) &&
946 bond->primary_slave->link == BOND_LINK_UP &&
947 bond_should_change_active(bond)) {
948 new_active = bond->primary_slave;
951 /* remember where to stop iterating over the slaves */
952 old_active = new_active;
954 bond_for_each_slave_from(bond, new_active, i, old_active) {
955 if (new_active->link == BOND_LINK_UP) {
957 } else if (new_active->link == BOND_LINK_BACK &&
958 IS_UP(new_active->dev)) {
959 /* link up, but waiting for stabilization */
960 if (new_active->delay < mintime) {
961 mintime = new_active->delay;
962 bestslave = new_active;
970 static bool bond_should_notify_peers(struct bonding *bond)
972 struct slave *slave = bond->curr_active_slave;
974 pr_debug("bond_should_notify_peers: bond %s slave %s\n",
975 bond->dev->name, slave ? slave->dev->name : "NULL");
977 if (!slave || !bond->send_peer_notif ||
978 test_bit(__LINK_STATE_LINKWATCH_PENDING, &slave->dev->state))
981 bond->send_peer_notif--;
986 * change_active_interface - change the active slave into the specified one
987 * @bond: our bonding struct
988 * @new: the new slave to make the active one
990 * Set the new slave to the bond's settings and unset them on the old
992 * Setting include flags, mc-list, promiscuity, allmulti, etc.
994 * If @new's link state is %BOND_LINK_BACK we'll set it to %BOND_LINK_UP,
995 * because it is apparently the best available slave we have, even though its
996 * updelay hasn't timed out yet.
998 * If new_active is not NULL, caller must hold bond->lock for read and
999 * curr_slave_lock for write_bh.
1001 void bond_change_active_slave(struct bonding *bond, struct slave *new_active)
1003 struct slave *old_active = bond->curr_active_slave;
1005 if (old_active == new_active)
1009 new_active->jiffies = jiffies;
1011 if (new_active->link == BOND_LINK_BACK) {
1012 if (USES_PRIMARY(bond->params.mode)) {
1013 pr_info("%s: making interface %s the new active one %d ms earlier.\n",
1014 bond->dev->name, new_active->dev->name,
1015 (bond->params.updelay - new_active->delay) * bond->params.miimon);
1018 new_active->delay = 0;
1019 new_active->link = BOND_LINK_UP;
1021 if (bond->params.mode == BOND_MODE_8023AD)
1022 bond_3ad_handle_link_change(new_active, BOND_LINK_UP);
1024 if (bond_is_lb(bond))
1025 bond_alb_handle_link_change(bond, new_active, BOND_LINK_UP);
1027 if (USES_PRIMARY(bond->params.mode)) {
1028 pr_info("%s: making interface %s the new active one.\n",
1029 bond->dev->name, new_active->dev->name);
1034 if (USES_PRIMARY(bond->params.mode))
1035 bond_hw_addr_swap(bond, new_active, old_active);
1037 if (bond_is_lb(bond)) {
1038 bond_alb_handle_active_change(bond, new_active);
1040 bond_set_slave_inactive_flags(old_active);
1042 bond_set_slave_active_flags(new_active);
1044 bond->curr_active_slave = new_active;
1047 if (bond->params.mode == BOND_MODE_ACTIVEBACKUP) {
1049 bond_set_slave_inactive_flags(old_active);
1052 bool should_notify_peers = false;
1054 bond_set_slave_active_flags(new_active);
1056 if (bond->params.fail_over_mac)
1057 bond_do_fail_over_mac(bond, new_active,
1060 if (netif_running(bond->dev)) {
1061 bond->send_peer_notif =
1062 bond->params.num_peer_notif;
1063 should_notify_peers =
1064 bond_should_notify_peers(bond);
1067 write_unlock_bh(&bond->curr_slave_lock);
1068 read_unlock(&bond->lock);
1070 call_netdevice_notifiers(NETDEV_BONDING_FAILOVER, bond->dev);
1071 if (should_notify_peers)
1072 call_netdevice_notifiers(NETDEV_NOTIFY_PEERS,
1075 read_lock(&bond->lock);
1076 write_lock_bh(&bond->curr_slave_lock);
1080 /* resend IGMP joins since active slave has changed or
1081 * all were sent on curr_active_slave.
1082 * resend only if bond is brought up with the affected
1083 * bonding modes and the retransmission is enabled */
1084 if (netif_running(bond->dev) && (bond->params.resend_igmp > 0) &&
1085 ((USES_PRIMARY(bond->params.mode) && new_active) ||
1086 bond->params.mode == BOND_MODE_ROUNDROBIN)) {
1087 bond->igmp_retrans = bond->params.resend_igmp;
1088 queue_delayed_work(bond->wq, &bond->mcast_work, 0);
1093 * bond_select_active_slave - select a new active slave, if needed
1094 * @bond: our bonding struct
1096 * This functions should be called when one of the following occurs:
1097 * - The old curr_active_slave has been released or lost its link.
1098 * - The primary_slave has got its link back.
1099 * - A slave has got its link back and there's no old curr_active_slave.
1101 * Caller must hold bond->lock for read and curr_slave_lock for write_bh.
1103 void bond_select_active_slave(struct bonding *bond)
1105 struct slave *best_slave;
1108 best_slave = bond_find_best_slave(bond);
1109 if (best_slave != bond->curr_active_slave) {
1110 bond_change_active_slave(bond, best_slave);
1111 rv = bond_set_carrier(bond);
1115 if (netif_carrier_ok(bond->dev)) {
1116 pr_info("%s: first active interface up!\n",
1119 pr_info("%s: now running without any active interface !\n",
1125 /*--------------------------- slave list handling ---------------------------*/
1128 * This function attaches the slave to the end of list.
1130 * bond->lock held for writing by caller.
1132 static void bond_attach_slave(struct bonding *bond, struct slave *new_slave)
1134 if (bond->first_slave == NULL) { /* attaching the first slave */
1135 new_slave->next = new_slave;
1136 new_slave->prev = new_slave;
1137 bond->first_slave = new_slave;
1139 new_slave->next = bond->first_slave;
1140 new_slave->prev = bond->first_slave->prev;
1141 new_slave->next->prev = new_slave;
1142 new_slave->prev->next = new_slave;
1149 * This function detaches the slave from the list.
1150 * WARNING: no check is made to verify if the slave effectively
1151 * belongs to <bond>.
1152 * Nothing is freed on return, structures are just unchained.
1153 * If any slave pointer in bond was pointing to <slave>,
1154 * it should be changed by the calling function.
1156 * bond->lock held for writing by caller.
1158 static void bond_detach_slave(struct bonding *bond, struct slave *slave)
1161 slave->next->prev = slave->prev;
1164 slave->prev->next = slave->next;
1166 if (bond->first_slave == slave) { /* slave is the first slave */
1167 if (bond->slave_cnt > 1) { /* there are more slave */
1168 bond->first_slave = slave->next;
1170 bond->first_slave = NULL; /* slave was the last one */
1179 #ifdef CONFIG_NET_POLL_CONTROLLER
1180 static inline int slave_enable_netpoll(struct slave *slave)
1185 np = kzalloc(sizeof(*np), GFP_ATOMIC);
1190 err = __netpoll_setup(np, slave->dev, GFP_ATOMIC);
1199 static inline void slave_disable_netpoll(struct slave *slave)
1201 struct netpoll *np = slave->np;
1207 __netpoll_free_async(np);
1209 static inline bool slave_dev_support_netpoll(struct net_device *slave_dev)
1211 if (slave_dev->priv_flags & IFF_DISABLE_NETPOLL)
1213 if (!slave_dev->netdev_ops->ndo_poll_controller)
1218 static void bond_poll_controller(struct net_device *bond_dev)
1222 static void bond_netpoll_cleanup(struct net_device *bond_dev)
1224 struct bonding *bond = netdev_priv(bond_dev);
1225 struct slave *slave;
1228 bond_for_each_slave(bond, slave, i)
1229 if (IS_UP(slave->dev))
1230 slave_disable_netpoll(slave);
1233 static int bond_netpoll_setup(struct net_device *dev, struct netpoll_info *ni, gfp_t gfp)
1235 struct bonding *bond = netdev_priv(dev);
1236 struct slave *slave;
1239 bond_for_each_slave(bond, slave, i) {
1240 err = slave_enable_netpoll(slave);
1242 bond_netpoll_cleanup(dev);
1249 static struct netpoll_info *bond_netpoll_info(struct bonding *bond)
1251 return bond->dev->npinfo;
1255 static inline int slave_enable_netpoll(struct slave *slave)
1259 static inline void slave_disable_netpoll(struct slave *slave)
1262 static void bond_netpoll_cleanup(struct net_device *bond_dev)
1267 /*---------------------------------- IOCTL ----------------------------------*/
1269 static netdev_features_t bond_fix_features(struct net_device *dev,
1270 netdev_features_t features)
1272 struct slave *slave;
1273 struct bonding *bond = netdev_priv(dev);
1274 netdev_features_t mask;
1277 read_lock(&bond->lock);
1279 if (!bond->first_slave) {
1280 /* Disable adding VLANs to empty bond. But why? --mq */
1281 features |= NETIF_F_VLAN_CHALLENGED;
1286 features &= ~NETIF_F_ONE_FOR_ALL;
1287 features |= NETIF_F_ALL_FOR_ALL;
1289 bond_for_each_slave(bond, slave, i) {
1290 features = netdev_increment_features(features,
1291 slave->dev->features,
1294 features = netdev_add_tso_features(features, mask);
1297 read_unlock(&bond->lock);
1301 #define BOND_VLAN_FEATURES (NETIF_F_ALL_CSUM | NETIF_F_SG | \
1302 NETIF_F_FRAGLIST | NETIF_F_ALL_TSO | \
1303 NETIF_F_HIGHDMA | NETIF_F_LRO)
1305 static void bond_compute_features(struct bonding *bond)
1307 struct slave *slave;
1308 struct net_device *bond_dev = bond->dev;
1309 netdev_features_t vlan_features = BOND_VLAN_FEATURES;
1310 unsigned short max_hard_header_len = ETH_HLEN;
1311 unsigned int gso_max_size = GSO_MAX_SIZE;
1312 u16 gso_max_segs = GSO_MAX_SEGS;
1314 unsigned int flags, dst_release_flag = IFF_XMIT_DST_RELEASE;
1316 read_lock(&bond->lock);
1318 if (!bond->first_slave)
1321 bond_for_each_slave(bond, slave, i) {
1322 vlan_features = netdev_increment_features(vlan_features,
1323 slave->dev->vlan_features, BOND_VLAN_FEATURES);
1325 dst_release_flag &= slave->dev->priv_flags;
1326 if (slave->dev->hard_header_len > max_hard_header_len)
1327 max_hard_header_len = slave->dev->hard_header_len;
1329 gso_max_size = min(gso_max_size, slave->dev->gso_max_size);
1330 gso_max_segs = min(gso_max_segs, slave->dev->gso_max_segs);
1334 bond_dev->vlan_features = vlan_features;
1335 bond_dev->hard_header_len = max_hard_header_len;
1336 bond_dev->gso_max_segs = gso_max_segs;
1337 netif_set_gso_max_size(bond_dev, gso_max_size);
1339 flags = bond_dev->priv_flags & ~IFF_XMIT_DST_RELEASE;
1340 bond_dev->priv_flags = flags | dst_release_flag;
1342 read_unlock(&bond->lock);
1344 netdev_change_features(bond_dev);
1347 static void bond_setup_by_slave(struct net_device *bond_dev,
1348 struct net_device *slave_dev)
1350 bond_dev->header_ops = slave_dev->header_ops;
1352 bond_dev->type = slave_dev->type;
1353 bond_dev->hard_header_len = slave_dev->hard_header_len;
1354 bond_dev->addr_len = slave_dev->addr_len;
1356 memcpy(bond_dev->broadcast, slave_dev->broadcast,
1357 slave_dev->addr_len);
1360 /* On bonding slaves other than the currently active slave, suppress
1361 * duplicates except for alb non-mcast/bcast.
1363 static bool bond_should_deliver_exact_match(struct sk_buff *skb,
1364 struct slave *slave,
1365 struct bonding *bond)
1367 if (bond_is_slave_inactive(slave)) {
1368 if (bond->params.mode == BOND_MODE_ALB &&
1369 skb->pkt_type != PACKET_BROADCAST &&
1370 skb->pkt_type != PACKET_MULTICAST)
1377 static rx_handler_result_t bond_handle_frame(struct sk_buff **pskb)
1379 struct sk_buff *skb = *pskb;
1380 struct slave *slave;
1381 struct bonding *bond;
1382 int (*recv_probe)(const struct sk_buff *, struct bonding *,
1384 int ret = RX_HANDLER_ANOTHER;
1386 skb = skb_share_check(skb, GFP_ATOMIC);
1388 return RX_HANDLER_CONSUMED;
1392 slave = bond_slave_get_rcu(skb->dev);
1395 if (bond->params.arp_interval)
1396 slave->dev->last_rx = jiffies;
1398 recv_probe = ACCESS_ONCE(bond->recv_probe);
1400 ret = recv_probe(skb, bond, slave);
1401 if (ret == RX_HANDLER_CONSUMED) {
1407 if (bond_should_deliver_exact_match(skb, slave, bond)) {
1408 return RX_HANDLER_EXACT;
1411 skb->dev = bond->dev;
1413 if (bond->params.mode == BOND_MODE_ALB &&
1414 bond->dev->priv_flags & IFF_BRIDGE_PORT &&
1415 skb->pkt_type == PACKET_HOST) {
1417 if (unlikely(skb_cow_head(skb,
1418 skb->data - skb_mac_header(skb)))) {
1420 return RX_HANDLER_CONSUMED;
1422 memcpy(eth_hdr(skb)->h_dest, bond->dev->dev_addr, ETH_ALEN);
1428 static int bond_master_upper_dev_link(struct net_device *bond_dev,
1429 struct net_device *slave_dev)
1433 err = netdev_master_upper_dev_link(slave_dev, bond_dev);
1436 slave_dev->flags |= IFF_SLAVE;
1437 rtmsg_ifinfo(RTM_NEWLINK, slave_dev, IFF_SLAVE);
1441 static void bond_upper_dev_unlink(struct net_device *bond_dev,
1442 struct net_device *slave_dev)
1444 netdev_upper_dev_unlink(slave_dev, bond_dev);
1445 slave_dev->flags &= ~IFF_SLAVE;
1446 rtmsg_ifinfo(RTM_NEWLINK, slave_dev, IFF_SLAVE);
1449 /* enslave device <slave> to bond device <master> */
1450 int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev)
1452 struct bonding *bond = netdev_priv(bond_dev);
1453 const struct net_device_ops *slave_ops = slave_dev->netdev_ops;
1454 struct slave *new_slave = NULL;
1455 struct sockaddr addr;
1459 if (!bond->params.use_carrier &&
1460 slave_dev->ethtool_ops->get_link == NULL &&
1461 slave_ops->ndo_do_ioctl == NULL) {
1462 pr_warning("%s: Warning: no link monitoring support for %s\n",
1463 bond_dev->name, slave_dev->name);
1466 /* already enslaved */
1467 if (slave_dev->flags & IFF_SLAVE) {
1468 pr_debug("Error, Device was already enslaved\n");
1472 /* vlan challenged mutual exclusion */
1473 /* no need to lock since we're protected by rtnl_lock */
1474 if (slave_dev->features & NETIF_F_VLAN_CHALLENGED) {
1475 pr_debug("%s: NETIF_F_VLAN_CHALLENGED\n", slave_dev->name);
1476 if (vlan_uses_dev(bond_dev)) {
1477 pr_err("%s: Error: cannot enslave VLAN challenged slave %s on VLAN enabled bond %s\n",
1478 bond_dev->name, slave_dev->name, bond_dev->name);
1481 pr_warning("%s: Warning: enslaved VLAN challenged slave %s. Adding VLANs will be blocked as long as %s is part of bond %s\n",
1482 bond_dev->name, slave_dev->name,
1483 slave_dev->name, bond_dev->name);
1486 pr_debug("%s: ! NETIF_F_VLAN_CHALLENGED\n", slave_dev->name);
1490 * Old ifenslave binaries are no longer supported. These can
1491 * be identified with moderate accuracy by the state of the slave:
1492 * the current ifenslave will set the interface down prior to
1493 * enslaving it; the old ifenslave will not.
1495 if ((slave_dev->flags & IFF_UP)) {
1496 pr_err("%s is up. This may be due to an out of date ifenslave.\n",
1499 goto err_undo_flags;
1502 /* set bonding device ether type by slave - bonding netdevices are
1503 * created with ether_setup, so when the slave type is not ARPHRD_ETHER
1504 * there is a need to override some of the type dependent attribs/funcs.
1506 * bond ether type mutual exclusion - don't allow slaves of dissimilar
1507 * ether type (eg ARPHRD_ETHER and ARPHRD_INFINIBAND) share the same bond
1509 if (bond->slave_cnt == 0) {
1510 if (bond_dev->type != slave_dev->type) {
1511 pr_debug("%s: change device type from %d to %d\n",
1513 bond_dev->type, slave_dev->type);
1515 res = call_netdevice_notifiers(NETDEV_PRE_TYPE_CHANGE,
1517 res = notifier_to_errno(res);
1519 pr_err("%s: refused to change device type\n",
1522 goto err_undo_flags;
1525 /* Flush unicast and multicast addresses */
1526 dev_uc_flush(bond_dev);
1527 dev_mc_flush(bond_dev);
1529 if (slave_dev->type != ARPHRD_ETHER)
1530 bond_setup_by_slave(bond_dev, slave_dev);
1532 ether_setup(bond_dev);
1533 bond_dev->priv_flags &= ~IFF_TX_SKB_SHARING;
1536 call_netdevice_notifiers(NETDEV_POST_TYPE_CHANGE,
1539 } else if (bond_dev->type != slave_dev->type) {
1540 pr_err("%s ether type (%d) is different from other slaves (%d), can not enslave it.\n",
1542 slave_dev->type, bond_dev->type);
1544 goto err_undo_flags;
1547 if (slave_ops->ndo_set_mac_address == NULL) {
1548 if (bond->slave_cnt == 0) {
1549 pr_warning("%s: Warning: The first slave device specified does not support setting the MAC address. Setting fail_over_mac to active.",
1551 bond->params.fail_over_mac = BOND_FOM_ACTIVE;
1552 } else if (bond->params.fail_over_mac != BOND_FOM_ACTIVE) {
1553 pr_err("%s: Error: The slave device specified does not support setting the MAC address, but fail_over_mac is not set to active.\n",
1556 goto err_undo_flags;
1560 call_netdevice_notifiers(NETDEV_JOIN, slave_dev);
1562 /* If this is the first slave, then we need to set the master's hardware
1563 * address to be the same as the slave's. */
1564 if (!bond->slave_cnt && bond->dev->addr_assign_type == NET_ADDR_RANDOM)
1565 bond_set_dev_addr(bond->dev, slave_dev);
1567 new_slave = kzalloc(sizeof(struct slave), GFP_KERNEL);
1570 goto err_undo_flags;
1574 * Set the new_slave's queue_id to be zero. Queue ID mapping
1575 * is set via sysfs or module option if desired.
1577 new_slave->queue_id = 0;
1579 /* Save slave's original mtu and then set it to match the bond */
1580 new_slave->original_mtu = slave_dev->mtu;
1581 res = dev_set_mtu(slave_dev, bond->dev->mtu);
1583 pr_debug("Error %d calling dev_set_mtu\n", res);
1588 * Save slave's original ("permanent") mac address for modes
1589 * that need it, and for restoring it upon release, and then
1590 * set it to the master's address
1592 memcpy(new_slave->perm_hwaddr, slave_dev->dev_addr, ETH_ALEN);
1594 if (!bond->params.fail_over_mac) {
1596 * Set slave to master's mac address. The application already
1597 * set the master's mac address to that of the first slave
1599 memcpy(addr.sa_data, bond_dev->dev_addr, bond_dev->addr_len);
1600 addr.sa_family = slave_dev->type;
1601 res = dev_set_mac_address(slave_dev, &addr);
1603 pr_debug("Error %d calling set_mac_address\n", res);
1604 goto err_restore_mtu;
1608 res = bond_master_upper_dev_link(bond_dev, slave_dev);
1610 pr_debug("Error %d calling bond_master_upper_dev_link\n", res);
1611 goto err_restore_mac;
1614 /* open the slave since the application closed it */
1615 res = dev_open(slave_dev);
1617 pr_debug("Opening slave %s failed\n", slave_dev->name);
1618 goto err_unset_master;
1621 new_slave->bond = bond;
1622 new_slave->dev = slave_dev;
1623 slave_dev->priv_flags |= IFF_BONDING;
1625 if (bond_is_lb(bond)) {
1626 /* bond_alb_init_slave() must be called before all other stages since
1627 * it might fail and we do not want to have to undo everything
1629 res = bond_alb_init_slave(bond, new_slave);
1634 /* If the mode USES_PRIMARY, then the following is handled by
1635 * bond_change_active_slave().
1637 if (!USES_PRIMARY(bond->params.mode)) {
1638 /* set promiscuity level to new slave */
1639 if (bond_dev->flags & IFF_PROMISC) {
1640 res = dev_set_promiscuity(slave_dev, 1);
1645 /* set allmulti level to new slave */
1646 if (bond_dev->flags & IFF_ALLMULTI) {
1647 res = dev_set_allmulti(slave_dev, 1);
1652 netif_addr_lock_bh(bond_dev);
1654 dev_mc_sync_multiple(slave_dev, bond_dev);
1655 dev_uc_sync_multiple(slave_dev, bond_dev);
1657 netif_addr_unlock_bh(bond_dev);
1660 if (bond->params.mode == BOND_MODE_8023AD) {
1661 /* add lacpdu mc addr to mc list */
1662 u8 lacpdu_multicast[ETH_ALEN] = MULTICAST_LACPDU_ADDR;
1664 dev_mc_add(slave_dev, lacpdu_multicast);
1667 bond_add_vlans_on_slave(bond, slave_dev);
1669 write_lock_bh(&bond->lock);
1671 bond_attach_slave(bond, new_slave);
1673 new_slave->delay = 0;
1674 new_slave->link_failure_count = 0;
1676 write_unlock_bh(&bond->lock);
1678 bond_compute_features(bond);
1680 bond_update_speed_duplex(new_slave);
1682 read_lock(&bond->lock);
1684 new_slave->last_arp_rx = jiffies -
1685 (msecs_to_jiffies(bond->params.arp_interval) + 1);
1686 for (i = 0; i < BOND_MAX_ARP_TARGETS; i++)
1687 new_slave->target_last_arp_rx[i] = new_slave->last_arp_rx;
1689 if (bond->params.miimon && !bond->params.use_carrier) {
1690 link_reporting = bond_check_dev_link(bond, slave_dev, 1);
1692 if ((link_reporting == -1) && !bond->params.arp_interval) {
1694 * miimon is set but a bonded network driver
1695 * does not support ETHTOOL/MII and
1696 * arp_interval is not set. Note: if
1697 * use_carrier is enabled, we will never go
1698 * here (because netif_carrier is always
1699 * supported); thus, we don't need to change
1700 * the messages for netif_carrier.
1702 pr_warning("%s: Warning: MII and ETHTOOL support not available for interface %s, and arp_interval/arp_ip_target module parameters not specified, thus bonding will not detect link failures! see bonding.txt for details.\n",
1703 bond_dev->name, slave_dev->name);
1704 } else if (link_reporting == -1) {
1705 /* unable get link status using mii/ethtool */
1706 pr_warning("%s: Warning: can't get link status from interface %s; the network driver associated with this interface does not support MII or ETHTOOL link status reporting, thus miimon has no effect on this interface.\n",
1707 bond_dev->name, slave_dev->name);
1711 /* check for initial state */
1712 if (bond->params.miimon) {
1713 if (bond_check_dev_link(bond, slave_dev, 0) == BMSR_LSTATUS) {
1714 if (bond->params.updelay) {
1715 new_slave->link = BOND_LINK_BACK;
1716 new_slave->delay = bond->params.updelay;
1718 new_slave->link = BOND_LINK_UP;
1721 new_slave->link = BOND_LINK_DOWN;
1723 } else if (bond->params.arp_interval) {
1724 new_slave->link = (netif_carrier_ok(slave_dev) ?
1725 BOND_LINK_UP : BOND_LINK_DOWN);
1727 new_slave->link = BOND_LINK_UP;
1730 if (new_slave->link != BOND_LINK_DOWN)
1731 new_slave->jiffies = jiffies;
1732 pr_debug("Initial state of slave_dev is BOND_LINK_%s\n",
1733 new_slave->link == BOND_LINK_DOWN ? "DOWN" :
1734 (new_slave->link == BOND_LINK_UP ? "UP" : "BACK"));
1736 if (USES_PRIMARY(bond->params.mode) && bond->params.primary[0]) {
1737 /* if there is a primary slave, remember it */
1738 if (strcmp(bond->params.primary, new_slave->dev->name) == 0) {
1739 bond->primary_slave = new_slave;
1740 bond->force_primary = true;
1744 write_lock_bh(&bond->curr_slave_lock);
1746 switch (bond->params.mode) {
1747 case BOND_MODE_ACTIVEBACKUP:
1748 bond_set_slave_inactive_flags(new_slave);
1749 bond_select_active_slave(bond);
1751 case BOND_MODE_8023AD:
1752 /* in 802.3ad mode, the internal mechanism
1753 * will activate the slaves in the selected
1756 bond_set_slave_inactive_flags(new_slave);
1757 /* if this is the first slave */
1758 if (bond->slave_cnt == 1) {
1759 SLAVE_AD_INFO(new_slave).id = 1;
1760 /* Initialize AD with the number of times that the AD timer is called in 1 second
1761 * can be called only after the mac address of the bond is set
1763 bond_3ad_initialize(bond, 1000/AD_TIMER_INTERVAL);
1765 SLAVE_AD_INFO(new_slave).id =
1766 SLAVE_AD_INFO(new_slave->prev).id + 1;
1769 bond_3ad_bind_slave(new_slave);
1773 bond_set_active_slave(new_slave);
1774 bond_set_slave_inactive_flags(new_slave);
1775 bond_select_active_slave(bond);
1778 pr_debug("This slave is always active in trunk mode\n");
1780 /* always active in trunk mode */
1781 bond_set_active_slave(new_slave);
1783 /* In trunking mode there is little meaning to curr_active_slave
1784 * anyway (it holds no special properties of the bond device),
1785 * so we can change it without calling change_active_interface()
1787 if (!bond->curr_active_slave && new_slave->link == BOND_LINK_UP)
1788 bond->curr_active_slave = new_slave;
1791 } /* switch(bond_mode) */
1793 write_unlock_bh(&bond->curr_slave_lock);
1795 bond_set_carrier(bond);
1797 #ifdef CONFIG_NET_POLL_CONTROLLER
1798 slave_dev->npinfo = bond_netpoll_info(bond);
1799 if (slave_dev->npinfo) {
1800 if (slave_enable_netpoll(new_slave)) {
1801 read_unlock(&bond->lock);
1802 pr_info("Error, %s: master_dev is using netpoll, "
1803 "but new slave device does not support netpoll.\n",
1811 read_unlock(&bond->lock);
1813 res = bond_create_slave_symlinks(bond_dev, slave_dev);
1817 res = netdev_rx_handler_register(slave_dev, bond_handle_frame,
1820 pr_debug("Error %d calling netdev_rx_handler_register\n", res);
1821 goto err_dest_symlinks;
1824 pr_info("%s: enslaving %s as a%s interface with a%s link.\n",
1825 bond_dev->name, slave_dev->name,
1826 bond_is_active_slave(new_slave) ? "n active" : " backup",
1827 new_slave->link != BOND_LINK_DOWN ? "n up" : " down");
1829 /* enslave is successful */
1832 /* Undo stages on error */
1834 bond_destroy_slave_symlinks(bond_dev, slave_dev);
1837 if (!USES_PRIMARY(bond->params.mode))
1838 bond_hw_addr_flush(bond_dev, slave_dev);
1840 bond_del_vlans_from_slave(bond, slave_dev);
1841 write_lock_bh(&bond->lock);
1842 bond_detach_slave(bond, new_slave);
1843 if (bond->primary_slave == new_slave)
1844 bond->primary_slave = NULL;
1845 if (bond->curr_active_slave == new_slave) {
1846 bond_change_active_slave(bond, NULL);
1847 write_unlock_bh(&bond->lock);
1848 read_lock(&bond->lock);
1849 write_lock_bh(&bond->curr_slave_lock);
1850 bond_select_active_slave(bond);
1851 write_unlock_bh(&bond->curr_slave_lock);
1852 read_unlock(&bond->lock);
1854 write_unlock_bh(&bond->lock);
1856 slave_disable_netpoll(new_slave);
1859 slave_dev->priv_flags &= ~IFF_BONDING;
1860 dev_close(slave_dev);
1863 bond_upper_dev_unlink(bond_dev, slave_dev);
1866 if (!bond->params.fail_over_mac) {
1867 /* XXX TODO - fom follow mode needs to change master's
1868 * MAC if this slave's MAC is in use by the bond, or at
1869 * least print a warning.
1871 memcpy(addr.sa_data, new_slave->perm_hwaddr, ETH_ALEN);
1872 addr.sa_family = slave_dev->type;
1873 dev_set_mac_address(slave_dev, &addr);
1877 dev_set_mtu(slave_dev, new_slave->original_mtu);
1883 bond_compute_features(bond);
1884 /* Enslave of first slave has failed and we need to fix master's mac */
1885 if (bond->slave_cnt == 0 &&
1886 ether_addr_equal(bond_dev->dev_addr, slave_dev->dev_addr))
1887 eth_hw_addr_random(bond_dev);
1893 * Try to release the slave device <slave> from the bond device <master>
1894 * It is legal to access curr_active_slave without a lock because all the function
1895 * is write-locked. If "all" is true it means that the function is being called
1896 * while destroying a bond interface and all slaves are being released.
1898 * The rules for slave state should be:
1899 * for Active/Backup:
1900 * Active stays on all backups go down
1901 * for Bonded connections:
1902 * The first up interface should be left on and all others downed.
1904 static int __bond_release_one(struct net_device *bond_dev,
1905 struct net_device *slave_dev,
1908 struct bonding *bond = netdev_priv(bond_dev);
1909 struct slave *slave, *oldcurrent;
1910 struct sockaddr addr;
1911 netdev_features_t old_features = bond_dev->features;
1913 /* slave is not a slave or master is not master of this slave */
1914 if (!(slave_dev->flags & IFF_SLAVE) ||
1915 !netdev_has_upper_dev(slave_dev, bond_dev)) {
1916 pr_err("%s: Error: cannot release %s.\n",
1917 bond_dev->name, slave_dev->name);
1922 write_lock_bh(&bond->lock);
1924 slave = bond_get_slave_by_dev(bond, slave_dev);
1926 /* not a slave of this bond */
1927 pr_info("%s: %s not enslaved\n",
1928 bond_dev->name, slave_dev->name);
1929 write_unlock_bh(&bond->lock);
1930 unblock_netpoll_tx();
1934 write_unlock_bh(&bond->lock);
1935 /* unregister rx_handler early so bond_handle_frame wouldn't be called
1936 * for this slave anymore.
1938 netdev_rx_handler_unregister(slave_dev);
1939 write_lock_bh(&bond->lock);
1941 if (!all && !bond->params.fail_over_mac) {
1942 if (ether_addr_equal(bond_dev->dev_addr, slave->perm_hwaddr) &&
1943 bond->slave_cnt > 1)
1944 pr_warning("%s: Warning: the permanent HWaddr of %s - %pM - is still in use by %s. Set the HWaddr of %s to a different address to avoid conflicts.\n",
1945 bond_dev->name, slave_dev->name,
1947 bond_dev->name, slave_dev->name);
1950 /* Inform AD package of unbinding of slave. */
1951 if (bond->params.mode == BOND_MODE_8023AD) {
1952 /* must be called before the slave is
1953 * detached from the list
1955 bond_3ad_unbind_slave(slave);
1958 pr_info("%s: releasing %s interface %s\n",
1960 bond_is_active_slave(slave) ? "active" : "backup",
1963 oldcurrent = bond->curr_active_slave;
1965 bond->current_arp_slave = NULL;
1967 /* release the slave from its bond */
1968 bond_detach_slave(bond, slave);
1970 if (bond->primary_slave == slave)
1971 bond->primary_slave = NULL;
1973 if (oldcurrent == slave)
1974 bond_change_active_slave(bond, NULL);
1976 if (bond_is_lb(bond)) {
1977 /* Must be called only after the slave has been
1978 * detached from the list and the curr_active_slave
1979 * has been cleared (if our_slave == old_current),
1980 * but before a new active slave is selected.
1982 write_unlock_bh(&bond->lock);
1983 bond_alb_deinit_slave(bond, slave);
1984 write_lock_bh(&bond->lock);
1988 bond->curr_active_slave = NULL;
1989 } else if (oldcurrent == slave) {
1991 * Note that we hold RTNL over this sequence, so there
1992 * is no concern that another slave add/remove event
1995 write_unlock_bh(&bond->lock);
1996 read_lock(&bond->lock);
1997 write_lock_bh(&bond->curr_slave_lock);
1999 bond_select_active_slave(bond);
2001 write_unlock_bh(&bond->curr_slave_lock);
2002 read_unlock(&bond->lock);
2003 write_lock_bh(&bond->lock);
2006 if (bond->slave_cnt == 0) {
2007 bond_set_carrier(bond);
2008 eth_hw_addr_random(bond_dev);
2010 if (bond_vlan_used(bond)) {
2011 pr_warning("%s: Warning: clearing HW address of %s while it still has VLANs.\n",
2012 bond_dev->name, bond_dev->name);
2013 pr_warning("%s: When re-adding slaves, make sure the bond's HW address matches its VLANs'.\n",
2018 write_unlock_bh(&bond->lock);
2019 unblock_netpoll_tx();
2021 if (bond->slave_cnt == 0) {
2022 call_netdevice_notifiers(NETDEV_CHANGEADDR, bond->dev);
2023 call_netdevice_notifiers(NETDEV_RELEASE, bond->dev);
2026 bond_compute_features(bond);
2027 if (!(bond_dev->features & NETIF_F_VLAN_CHALLENGED) &&
2028 (old_features & NETIF_F_VLAN_CHALLENGED))
2029 pr_info("%s: last VLAN challenged slave %s left bond %s. VLAN blocking is removed\n",
2030 bond_dev->name, slave_dev->name, bond_dev->name);
2032 /* must do this from outside any spinlocks */
2033 bond_destroy_slave_symlinks(bond_dev, slave_dev);
2035 bond_del_vlans_from_slave(bond, slave_dev);
2037 /* If the mode USES_PRIMARY, then this cases was handled above by
2038 * bond_change_active_slave(..., NULL)
2040 if (!USES_PRIMARY(bond->params.mode)) {
2041 /* unset promiscuity level from slave */
2042 if (bond_dev->flags & IFF_PROMISC)
2043 dev_set_promiscuity(slave_dev, -1);
2045 /* unset allmulti level from slave */
2046 if (bond_dev->flags & IFF_ALLMULTI)
2047 dev_set_allmulti(slave_dev, -1);
2049 bond_hw_addr_flush(bond_dev, slave_dev);
2052 bond_upper_dev_unlink(bond_dev, slave_dev);
2054 slave_disable_netpoll(slave);
2056 /* close slave before restoring its mac address */
2057 dev_close(slave_dev);
2059 if (bond->params.fail_over_mac != BOND_FOM_ACTIVE) {
2060 /* restore original ("permanent") mac address */
2061 memcpy(addr.sa_data, slave->perm_hwaddr, ETH_ALEN);
2062 addr.sa_family = slave_dev->type;
2063 dev_set_mac_address(slave_dev, &addr);
2066 dev_set_mtu(slave_dev, slave->original_mtu);
2068 slave_dev->priv_flags &= ~IFF_BONDING;
2072 return 0; /* deletion OK */
2075 /* A wrapper used because of ndo_del_link */
2076 int bond_release(struct net_device *bond_dev, struct net_device *slave_dev)
2078 return __bond_release_one(bond_dev, slave_dev, false);
2082 * First release a slave and then destroy the bond if no more slaves are left.
2083 * Must be under rtnl_lock when this function is called.
2085 static int bond_release_and_destroy(struct net_device *bond_dev,
2086 struct net_device *slave_dev)
2088 struct bonding *bond = netdev_priv(bond_dev);
2091 ret = bond_release(bond_dev, slave_dev);
2092 if ((ret == 0) && (bond->slave_cnt == 0)) {
2093 bond_dev->priv_flags |= IFF_DISABLE_NETPOLL;
2094 pr_info("%s: destroying bond %s.\n",
2095 bond_dev->name, bond_dev->name);
2096 unregister_netdevice(bond_dev);
2102 * This function changes the active slave to slave <slave_dev>.
2103 * It returns -EINVAL in the following cases.
2104 * - <slave_dev> is not found in the list.
2105 * - There is not active slave now.
2106 * - <slave_dev> is already active.
2107 * - The link state of <slave_dev> is not BOND_LINK_UP.
2108 * - <slave_dev> is not running.
2109 * In these cases, this function does nothing.
2110 * In the other cases, current_slave pointer is changed and 0 is returned.
2112 static int bond_ioctl_change_active(struct net_device *bond_dev, struct net_device *slave_dev)
2114 struct bonding *bond = netdev_priv(bond_dev);
2115 struct slave *old_active = NULL;
2116 struct slave *new_active = NULL;
2119 if (!USES_PRIMARY(bond->params.mode))
2122 /* Verify that bond_dev is indeed the master of slave_dev */
2123 if (!(slave_dev->flags & IFF_SLAVE) ||
2124 !netdev_has_upper_dev(slave_dev, bond_dev))
2127 read_lock(&bond->lock);
2129 read_lock(&bond->curr_slave_lock);
2130 old_active = bond->curr_active_slave;
2131 read_unlock(&bond->curr_slave_lock);
2133 new_active = bond_get_slave_by_dev(bond, slave_dev);
2136 * Changing to the current active: do nothing; return success.
2138 if (new_active && (new_active == old_active)) {
2139 read_unlock(&bond->lock);
2145 (new_active->link == BOND_LINK_UP) &&
2146 IS_UP(new_active->dev)) {
2148 write_lock_bh(&bond->curr_slave_lock);
2149 bond_change_active_slave(bond, new_active);
2150 write_unlock_bh(&bond->curr_slave_lock);
2151 unblock_netpoll_tx();
2155 read_unlock(&bond->lock);
2160 static int bond_info_query(struct net_device *bond_dev, struct ifbond *info)
2162 struct bonding *bond = netdev_priv(bond_dev);
2164 info->bond_mode = bond->params.mode;
2165 info->miimon = bond->params.miimon;
2167 read_lock(&bond->lock);
2168 info->num_slaves = bond->slave_cnt;
2169 read_unlock(&bond->lock);
2174 static int bond_slave_info_query(struct net_device *bond_dev, struct ifslave *info)
2176 struct bonding *bond = netdev_priv(bond_dev);
2177 struct slave *slave;
2178 int i, res = -ENODEV;
2180 read_lock(&bond->lock);
2182 bond_for_each_slave(bond, slave, i) {
2183 if (i == (int)info->slave_id) {
2185 strcpy(info->slave_name, slave->dev->name);
2186 info->link = slave->link;
2187 info->state = bond_slave_state(slave);
2188 info->link_failure_count = slave->link_failure_count;
2193 read_unlock(&bond->lock);
2198 /*-------------------------------- Monitoring -------------------------------*/
2201 static int bond_miimon_inspect(struct bonding *bond)
2203 struct slave *slave;
2204 int i, link_state, commit = 0;
2205 bool ignore_updelay;
2207 ignore_updelay = !bond->curr_active_slave ? true : false;
2209 bond_for_each_slave(bond, slave, i) {
2210 slave->new_link = BOND_LINK_NOCHANGE;
2212 link_state = bond_check_dev_link(bond, slave->dev, 0);
2214 switch (slave->link) {
2219 slave->link = BOND_LINK_FAIL;
2220 slave->delay = bond->params.downdelay;
2222 pr_info("%s: link status down for %sinterface %s, disabling it in %d ms.\n",
2224 (bond->params.mode ==
2225 BOND_MODE_ACTIVEBACKUP) ?
2226 (bond_is_active_slave(slave) ?
2227 "active " : "backup ") : "",
2229 bond->params.downdelay * bond->params.miimon);
2232 case BOND_LINK_FAIL:
2235 * recovered before downdelay expired
2237 slave->link = BOND_LINK_UP;
2238 slave->jiffies = jiffies;
2239 pr_info("%s: link status up again after %d ms for interface %s.\n",
2241 (bond->params.downdelay - slave->delay) *
2242 bond->params.miimon,
2247 if (slave->delay <= 0) {
2248 slave->new_link = BOND_LINK_DOWN;
2256 case BOND_LINK_DOWN:
2260 slave->link = BOND_LINK_BACK;
2261 slave->delay = bond->params.updelay;
2264 pr_info("%s: link status up for interface %s, enabling it in %d ms.\n",
2265 bond->dev->name, slave->dev->name,
2266 ignore_updelay ? 0 :
2267 bond->params.updelay *
2268 bond->params.miimon);
2271 case BOND_LINK_BACK:
2273 slave->link = BOND_LINK_DOWN;
2274 pr_info("%s: link status down again after %d ms for interface %s.\n",
2276 (bond->params.updelay - slave->delay) *
2277 bond->params.miimon,
2286 if (slave->delay <= 0) {
2287 slave->new_link = BOND_LINK_UP;
2289 ignore_updelay = false;
2301 static void bond_miimon_commit(struct bonding *bond)
2303 struct slave *slave;
2306 bond_for_each_slave(bond, slave, i) {
2307 switch (slave->new_link) {
2308 case BOND_LINK_NOCHANGE:
2312 slave->link = BOND_LINK_UP;
2313 slave->jiffies = jiffies;
2315 if (bond->params.mode == BOND_MODE_8023AD) {
2316 /* prevent it from being the active one */
2317 bond_set_backup_slave(slave);
2318 } else if (bond->params.mode != BOND_MODE_ACTIVEBACKUP) {
2319 /* make it immediately active */
2320 bond_set_active_slave(slave);
2321 } else if (slave != bond->primary_slave) {
2322 /* prevent it from being the active one */
2323 bond_set_backup_slave(slave);
2326 pr_info("%s: link status definitely up for interface %s, %u Mbps %s duplex.\n",
2327 bond->dev->name, slave->dev->name,
2328 slave->speed == SPEED_UNKNOWN ? 0 : slave->speed,
2329 slave->duplex ? "full" : "half");
2331 /* notify ad that the link status has changed */
2332 if (bond->params.mode == BOND_MODE_8023AD)
2333 bond_3ad_handle_link_change(slave, BOND_LINK_UP);
2335 if (bond_is_lb(bond))
2336 bond_alb_handle_link_change(bond, slave,
2339 if (!bond->curr_active_slave ||
2340 (slave == bond->primary_slave))
2345 case BOND_LINK_DOWN:
2346 if (slave->link_failure_count < UINT_MAX)
2347 slave->link_failure_count++;
2349 slave->link = BOND_LINK_DOWN;
2351 if (bond->params.mode == BOND_MODE_ACTIVEBACKUP ||
2352 bond->params.mode == BOND_MODE_8023AD)
2353 bond_set_slave_inactive_flags(slave);
2355 pr_info("%s: link status definitely down for interface %s, disabling it\n",
2356 bond->dev->name, slave->dev->name);
2358 if (bond->params.mode == BOND_MODE_8023AD)
2359 bond_3ad_handle_link_change(slave,
2362 if (bond_is_lb(bond))
2363 bond_alb_handle_link_change(bond, slave,
2366 if (slave == bond->curr_active_slave)
2372 pr_err("%s: invalid new link %d on slave %s\n",
2373 bond->dev->name, slave->new_link,
2375 slave->new_link = BOND_LINK_NOCHANGE;
2383 write_lock_bh(&bond->curr_slave_lock);
2384 bond_select_active_slave(bond);
2385 write_unlock_bh(&bond->curr_slave_lock);
2386 unblock_netpoll_tx();
2389 bond_set_carrier(bond);
2395 * Really a wrapper that splits the mii monitor into two phases: an
2396 * inspection, then (if inspection indicates something needs to be done)
2397 * an acquisition of appropriate locks followed by a commit phase to
2398 * implement whatever link state changes are indicated.
2400 void bond_mii_monitor(struct work_struct *work)
2402 struct bonding *bond = container_of(work, struct bonding,
2404 bool should_notify_peers = false;
2405 unsigned long delay;
2407 read_lock(&bond->lock);
2409 delay = msecs_to_jiffies(bond->params.miimon);
2411 if (bond->slave_cnt == 0)
2414 should_notify_peers = bond_should_notify_peers(bond);
2416 if (bond_miimon_inspect(bond)) {
2417 read_unlock(&bond->lock);
2419 /* Race avoidance with bond_close cancel of workqueue */
2420 if (!rtnl_trylock()) {
2421 read_lock(&bond->lock);
2423 should_notify_peers = false;
2427 read_lock(&bond->lock);
2429 bond_miimon_commit(bond);
2431 read_unlock(&bond->lock);
2432 rtnl_unlock(); /* might sleep, hold no other locks */
2433 read_lock(&bond->lock);
2437 if (bond->params.miimon)
2438 queue_delayed_work(bond->wq, &bond->mii_work, delay);
2440 read_unlock(&bond->lock);
2442 if (should_notify_peers) {
2443 if (!rtnl_trylock()) {
2444 read_lock(&bond->lock);
2445 bond->send_peer_notif++;
2446 read_unlock(&bond->lock);
2449 call_netdevice_notifiers(NETDEV_NOTIFY_PEERS, bond->dev);
2454 static int bond_has_this_ip(struct bonding *bond, __be32 ip)
2456 struct vlan_entry *vlan;
2457 struct net_device *vlan_dev;
2459 if (ip == bond_confirm_addr(bond->dev, 0, ip))
2462 list_for_each_entry(vlan, &bond->vlan_list, vlan_list) {
2464 vlan_dev = __vlan_find_dev_deep(bond->dev, htons(ETH_P_8021Q),
2467 if (vlan_dev && ip == bond_confirm_addr(vlan_dev, 0, ip))
2475 * We go to the (large) trouble of VLAN tagging ARP frames because
2476 * switches in VLAN mode (especially if ports are configured as
2477 * "native" to a VLAN) might not pass non-tagged frames.
2479 static void bond_arp_send(struct net_device *slave_dev, int arp_op, __be32 dest_ip, __be32 src_ip, unsigned short vlan_id)
2481 struct sk_buff *skb;
2483 pr_debug("arp %d on slave %s: dst %pI4 src %pI4 vid %d\n", arp_op,
2484 slave_dev->name, &dest_ip, &src_ip, vlan_id);
2486 skb = arp_create(arp_op, ETH_P_ARP, dest_ip, slave_dev, src_ip,
2487 NULL, slave_dev->dev_addr, NULL);
2490 pr_err("ARP packet allocation failed\n");
2494 skb = vlan_put_tag(skb, htons(ETH_P_8021Q), vlan_id);
2496 pr_err("failed to insert VLAN tag\n");
2504 static void bond_arp_send_all(struct bonding *bond, struct slave *slave)
2507 __be32 *targets = bond->params.arp_targets;
2508 struct vlan_entry *vlan;
2509 struct net_device *vlan_dev = NULL;
2512 for (i = 0; (i < BOND_MAX_ARP_TARGETS); i++) {
2516 pr_debug("basa: target %pI4\n", &targets[i]);
2517 if (!bond_vlan_used(bond)) {
2518 pr_debug("basa: empty vlan: arp_send\n");
2519 addr = bond_confirm_addr(bond->dev, targets[i], 0);
2520 bond_arp_send(slave->dev, ARPOP_REQUEST, targets[i],
2526 * If VLANs are configured, we do a route lookup to
2527 * determine which VLAN interface would be used, so we
2528 * can tag the ARP with the proper VLAN tag.
2530 rt = ip_route_output(dev_net(bond->dev), targets[i], 0,
2533 if (net_ratelimit()) {
2534 pr_warning("%s: no route to arp_ip_target %pI4\n",
2535 bond->dev->name, &targets[i]);
2541 * This target is not on a VLAN
2543 if (rt->dst.dev == bond->dev) {
2545 pr_debug("basa: rtdev == bond->dev: arp_send\n");
2546 addr = bond_confirm_addr(bond->dev, targets[i], 0);
2547 bond_arp_send(slave->dev, ARPOP_REQUEST, targets[i],
2553 list_for_each_entry(vlan, &bond->vlan_list, vlan_list) {
2555 vlan_dev = __vlan_find_dev_deep(bond->dev,
2559 if (vlan_dev == rt->dst.dev) {
2560 vlan_id = vlan->vlan_id;
2561 pr_debug("basa: vlan match on %s %d\n",
2562 vlan_dev->name, vlan_id);
2567 if (vlan_id && vlan_dev) {
2569 addr = bond_confirm_addr(vlan_dev, targets[i], 0);
2570 bond_arp_send(slave->dev, ARPOP_REQUEST, targets[i],
2575 if (net_ratelimit()) {
2576 pr_warning("%s: no path to arp_ip_target %pI4 via rt.dev %s\n",
2577 bond->dev->name, &targets[i],
2578 rt->dst.dev ? rt->dst.dev->name : "NULL");
2584 static void bond_validate_arp(struct bonding *bond, struct slave *slave, __be32 sip, __be32 tip)
2588 if (!sip || !bond_has_this_ip(bond, tip)) {
2589 pr_debug("bva: sip %pI4 tip %pI4 not found\n", &sip, &tip);
2593 i = bond_get_targets_ip(bond->params.arp_targets, sip);
2595 pr_debug("bva: sip %pI4 not found in targets\n", &sip);
2598 slave->last_arp_rx = jiffies;
2599 slave->target_last_arp_rx[i] = jiffies;
2602 static int bond_arp_rcv(const struct sk_buff *skb, struct bonding *bond,
2603 struct slave *slave)
2605 struct arphdr *arp = (struct arphdr *)skb->data;
2606 unsigned char *arp_ptr;
2610 if (skb->protocol != __cpu_to_be16(ETH_P_ARP))
2611 return RX_HANDLER_ANOTHER;
2613 read_lock(&bond->lock);
2615 if (!slave_do_arp_validate(bond, slave))
2618 alen = arp_hdr_len(bond->dev);
2620 pr_debug("bond_arp_rcv: bond %s skb->dev %s\n",
2621 bond->dev->name, skb->dev->name);
2623 if (alen > skb_headlen(skb)) {
2624 arp = kmalloc(alen, GFP_ATOMIC);
2627 if (skb_copy_bits(skb, 0, arp, alen) < 0)
2631 if (arp->ar_hln != bond->dev->addr_len ||
2632 skb->pkt_type == PACKET_OTHERHOST ||
2633 skb->pkt_type == PACKET_LOOPBACK ||
2634 arp->ar_hrd != htons(ARPHRD_ETHER) ||
2635 arp->ar_pro != htons(ETH_P_IP) ||
2639 arp_ptr = (unsigned char *)(arp + 1);
2640 arp_ptr += bond->dev->addr_len;
2641 memcpy(&sip, arp_ptr, 4);
2642 arp_ptr += 4 + bond->dev->addr_len;
2643 memcpy(&tip, arp_ptr, 4);
2645 pr_debug("bond_arp_rcv: %s %s/%d av %d sv %d sip %pI4 tip %pI4\n",
2646 bond->dev->name, slave->dev->name, bond_slave_state(slave),
2647 bond->params.arp_validate, slave_do_arp_validate(bond, slave),
2651 * Backup slaves won't see the ARP reply, but do come through
2652 * here for each ARP probe (so we swap the sip/tip to validate
2653 * the probe). In a "redundant switch, common router" type of
2654 * configuration, the ARP probe will (hopefully) travel from
2655 * the active, through one switch, the router, then the other
2656 * switch before reaching the backup.
2658 * We 'trust' the arp requests if there is an active slave and
2659 * it received valid arp reply(s) after it became active. This
2660 * is done to avoid endless looping when we can't reach the
2661 * arp_ip_target and fool ourselves with our own arp requests.
2663 if (bond_is_active_slave(slave))
2664 bond_validate_arp(bond, slave, sip, tip);
2665 else if (bond->curr_active_slave &&
2666 time_after(slave_last_rx(bond, bond->curr_active_slave),
2667 bond->curr_active_slave->jiffies))
2668 bond_validate_arp(bond, slave, tip, sip);
2671 read_unlock(&bond->lock);
2672 if (arp != (struct arphdr *)skb->data)
2674 return RX_HANDLER_ANOTHER;
2678 * this function is called regularly to monitor each slave's link
2679 * ensuring that traffic is being sent and received when arp monitoring
2680 * is used in load-balancing mode. if the adapter has been dormant, then an
2681 * arp is transmitted to generate traffic. see activebackup_arp_monitor for
2682 * arp monitoring in active backup mode.
2684 void bond_loadbalance_arp_mon(struct work_struct *work)
2686 struct bonding *bond = container_of(work, struct bonding,
2688 struct slave *slave, *oldcurrent;
2689 int do_failover = 0;
2690 int delta_in_ticks, extra_ticks;
2693 read_lock(&bond->lock);
2695 delta_in_ticks = msecs_to_jiffies(bond->params.arp_interval);
2696 extra_ticks = delta_in_ticks / 2;
2698 if (bond->slave_cnt == 0)
2701 read_lock(&bond->curr_slave_lock);
2702 oldcurrent = bond->curr_active_slave;
2703 read_unlock(&bond->curr_slave_lock);
2705 /* see if any of the previous devices are up now (i.e. they have
2706 * xmt and rcv traffic). the curr_active_slave does not come into
2707 * the picture unless it is null. also, slave->jiffies is not needed
2708 * here because we send an arp on each slave and give a slave as
2709 * long as it needs to get the tx/rx within the delta.
2710 * TODO: what about up/down delay in arp mode? it wasn't here before
2713 bond_for_each_slave(bond, slave, i) {
2714 unsigned long trans_start = dev_trans_start(slave->dev);
2716 if (slave->link != BOND_LINK_UP) {
2717 if (time_in_range(jiffies,
2718 trans_start - delta_in_ticks,
2719 trans_start + delta_in_ticks + extra_ticks) &&
2720 time_in_range(jiffies,
2721 slave->dev->last_rx - delta_in_ticks,
2722 slave->dev->last_rx + delta_in_ticks + extra_ticks)) {
2724 slave->link = BOND_LINK_UP;
2725 bond_set_active_slave(slave);
2727 /* primary_slave has no meaning in round-robin
2728 * mode. the window of a slave being up and
2729 * curr_active_slave being null after enslaving
2733 pr_info("%s: link status definitely up for interface %s, ",
2738 pr_info("%s: interface %s is now up\n",
2744 /* slave->link == BOND_LINK_UP */
2746 /* not all switches will respond to an arp request
2747 * when the source ip is 0, so don't take the link down
2748 * if we don't know our ip yet
2750 if (!time_in_range(jiffies,
2751 trans_start - delta_in_ticks,
2752 trans_start + 2 * delta_in_ticks + extra_ticks) ||
2753 !time_in_range(jiffies,
2754 slave->dev->last_rx - delta_in_ticks,
2755 slave->dev->last_rx + 2 * delta_in_ticks + extra_ticks)) {
2757 slave->link = BOND_LINK_DOWN;
2758 bond_set_backup_slave(slave);
2760 if (slave->link_failure_count < UINT_MAX)
2761 slave->link_failure_count++;
2763 pr_info("%s: interface %s is now down.\n",
2767 if (slave == oldcurrent)
2772 /* note: if switch is in round-robin mode, all links
2773 * must tx arp to ensure all links rx an arp - otherwise
2774 * links may oscillate or not come up at all; if switch is
2775 * in something like xor mode, there is nothing we can
2776 * do - all replies will be rx'ed on same link causing slaves
2777 * to be unstable during low/no traffic periods
2779 if (IS_UP(slave->dev))
2780 bond_arp_send_all(bond, slave);
2785 write_lock_bh(&bond->curr_slave_lock);
2787 bond_select_active_slave(bond);
2789 write_unlock_bh(&bond->curr_slave_lock);
2790 unblock_netpoll_tx();
2794 if (bond->params.arp_interval)
2795 queue_delayed_work(bond->wq, &bond->arp_work, delta_in_ticks);
2797 read_unlock(&bond->lock);
2801 * Called to inspect slaves for active-backup mode ARP monitor link state
2802 * changes. Sets new_link in slaves to specify what action should take
2803 * place for the slave. Returns 0 if no changes are found, >0 if changes
2804 * to link states must be committed.
2806 * Called with bond->lock held for read.
2808 static int bond_ab_arp_inspect(struct bonding *bond, int delta_in_ticks)
2810 struct slave *slave;
2812 unsigned long trans_start;
2815 /* All the time comparisons below need some extra time. Otherwise, on
2816 * fast networks the ARP probe/reply may arrive within the same jiffy
2817 * as it was sent. Then, the next time the ARP monitor is run, one
2818 * arp_interval will already have passed in the comparisons.
2820 extra_ticks = delta_in_ticks / 2;
2822 bond_for_each_slave(bond, slave, i) {
2823 slave->new_link = BOND_LINK_NOCHANGE;
2825 if (slave->link != BOND_LINK_UP) {
2826 if (time_in_range(jiffies,
2827 slave_last_rx(bond, slave) - delta_in_ticks,
2828 slave_last_rx(bond, slave) + delta_in_ticks + extra_ticks)) {
2830 slave->new_link = BOND_LINK_UP;
2838 * Give slaves 2*delta after being enslaved or made
2839 * active. This avoids bouncing, as the last receive
2840 * times need a full ARP monitor cycle to be updated.
2842 if (time_in_range(jiffies,
2843 slave->jiffies - delta_in_ticks,
2844 slave->jiffies + 2 * delta_in_ticks + extra_ticks))
2848 * Backup slave is down if:
2849 * - No current_arp_slave AND
2850 * - more than 3*delta since last receive AND
2851 * - the bond has an IP address
2853 * Note: a non-null current_arp_slave indicates
2854 * the curr_active_slave went down and we are
2855 * searching for a new one; under this condition
2856 * we only take the curr_active_slave down - this
2857 * gives each slave a chance to tx/rx traffic
2858 * before being taken out
2860 if (!bond_is_active_slave(slave) &&
2861 !bond->current_arp_slave &&
2862 !time_in_range(jiffies,
2863 slave_last_rx(bond, slave) - delta_in_ticks,
2864 slave_last_rx(bond, slave) + 3 * delta_in_ticks + extra_ticks)) {
2866 slave->new_link = BOND_LINK_DOWN;
2871 * Active slave is down if:
2872 * - more than 2*delta since transmitting OR
2873 * - (more than 2*delta since receive AND
2874 * the bond has an IP address)
2876 trans_start = dev_trans_start(slave->dev);
2877 if (bond_is_active_slave(slave) &&
2878 (!time_in_range(jiffies,
2879 trans_start - delta_in_ticks,
2880 trans_start + 2 * delta_in_ticks + extra_ticks) ||
2881 !time_in_range(jiffies,
2882 slave_last_rx(bond, slave) - delta_in_ticks,
2883 slave_last_rx(bond, slave) + 2 * delta_in_ticks + extra_ticks))) {
2885 slave->new_link = BOND_LINK_DOWN;
2894 * Called to commit link state changes noted by inspection step of
2895 * active-backup mode ARP monitor.
2897 * Called with RTNL and bond->lock for read.
2899 static void bond_ab_arp_commit(struct bonding *bond, int delta_in_ticks)
2901 struct slave *slave;
2903 unsigned long trans_start;
2905 bond_for_each_slave(bond, slave, i) {
2906 switch (slave->new_link) {
2907 case BOND_LINK_NOCHANGE:
2911 trans_start = dev_trans_start(slave->dev);
2912 if ((!bond->curr_active_slave &&
2913 time_in_range(jiffies,
2914 trans_start - delta_in_ticks,
2915 trans_start + delta_in_ticks + delta_in_ticks / 2)) ||
2916 bond->curr_active_slave != slave) {
2917 slave->link = BOND_LINK_UP;
2918 if (bond->current_arp_slave) {
2919 bond_set_slave_inactive_flags(
2920 bond->current_arp_slave);
2921 bond->current_arp_slave = NULL;
2924 pr_info("%s: link status definitely up for interface %s.\n",
2925 bond->dev->name, slave->dev->name);
2927 if (!bond->curr_active_slave ||
2928 (slave == bond->primary_slave))
2935 case BOND_LINK_DOWN:
2936 if (slave->link_failure_count < UINT_MAX)
2937 slave->link_failure_count++;
2939 slave->link = BOND_LINK_DOWN;
2940 bond_set_slave_inactive_flags(slave);
2942 pr_info("%s: link status definitely down for interface %s, disabling it\n",
2943 bond->dev->name, slave->dev->name);
2945 if (slave == bond->curr_active_slave) {
2946 bond->current_arp_slave = NULL;
2953 pr_err("%s: impossible: new_link %d on slave %s\n",
2954 bond->dev->name, slave->new_link,
2962 write_lock_bh(&bond->curr_slave_lock);
2963 bond_select_active_slave(bond);
2964 write_unlock_bh(&bond->curr_slave_lock);
2965 unblock_netpoll_tx();
2968 bond_set_carrier(bond);
2972 * Send ARP probes for active-backup mode ARP monitor.
2974 * Called with bond->lock held for read.
2976 static void bond_ab_arp_probe(struct bonding *bond)
2978 struct slave *slave;
2981 read_lock(&bond->curr_slave_lock);
2983 if (bond->current_arp_slave && bond->curr_active_slave)
2984 pr_info("PROBE: c_arp %s && cas %s BAD\n",
2985 bond->current_arp_slave->dev->name,
2986 bond->curr_active_slave->dev->name);
2988 if (bond->curr_active_slave) {
2989 bond_arp_send_all(bond, bond->curr_active_slave);
2990 read_unlock(&bond->curr_slave_lock);
2994 read_unlock(&bond->curr_slave_lock);
2996 /* if we don't have a curr_active_slave, search for the next available
2997 * backup slave from the current_arp_slave and make it the candidate
2998 * for becoming the curr_active_slave
3001 if (!bond->current_arp_slave) {
3002 bond->current_arp_slave = bond->first_slave;
3003 if (!bond->current_arp_slave)
3007 bond_set_slave_inactive_flags(bond->current_arp_slave);
3009 /* search for next candidate */
3010 bond_for_each_slave_from(bond, slave, i, bond->current_arp_slave->next) {
3011 if (IS_UP(slave->dev)) {
3012 slave->link = BOND_LINK_BACK;
3013 bond_set_slave_active_flags(slave);
3014 bond_arp_send_all(bond, slave);
3015 slave->jiffies = jiffies;
3016 bond->current_arp_slave = slave;
3020 /* if the link state is up at this point, we
3021 * mark it down - this can happen if we have
3022 * simultaneous link failures and
3023 * reselect_active_interface doesn't make this
3024 * one the current slave so it is still marked
3025 * up when it is actually down
3027 if (slave->link == BOND_LINK_UP) {
3028 slave->link = BOND_LINK_DOWN;
3029 if (slave->link_failure_count < UINT_MAX)
3030 slave->link_failure_count++;
3032 bond_set_slave_inactive_flags(slave);
3034 pr_info("%s: backup interface %s is now down.\n",
3035 bond->dev->name, slave->dev->name);
3040 void bond_activebackup_arp_mon(struct work_struct *work)
3042 struct bonding *bond = container_of(work, struct bonding,
3044 bool should_notify_peers = false;
3047 read_lock(&bond->lock);
3049 delta_in_ticks = msecs_to_jiffies(bond->params.arp_interval);
3051 if (bond->slave_cnt == 0)
3054 should_notify_peers = bond_should_notify_peers(bond);
3056 if (bond_ab_arp_inspect(bond, delta_in_ticks)) {
3057 read_unlock(&bond->lock);
3059 /* Race avoidance with bond_close flush of workqueue */
3060 if (!rtnl_trylock()) {
3061 read_lock(&bond->lock);
3063 should_notify_peers = false;
3067 read_lock(&bond->lock);
3069 bond_ab_arp_commit(bond, delta_in_ticks);
3071 read_unlock(&bond->lock);
3073 read_lock(&bond->lock);
3076 bond_ab_arp_probe(bond);
3079 if (bond->params.arp_interval)
3080 queue_delayed_work(bond->wq, &bond->arp_work, delta_in_ticks);
3082 read_unlock(&bond->lock);
3084 if (should_notify_peers) {
3085 if (!rtnl_trylock()) {
3086 read_lock(&bond->lock);
3087 bond->send_peer_notif++;
3088 read_unlock(&bond->lock);
3091 call_netdevice_notifiers(NETDEV_NOTIFY_PEERS, bond->dev);
3096 /*-------------------------- netdev event handling --------------------------*/
3099 * Change device name
3101 static int bond_event_changename(struct bonding *bond)
3103 bond_remove_proc_entry(bond);
3104 bond_create_proc_entry(bond);
3106 bond_debug_reregister(bond);
3111 static int bond_master_netdev_event(unsigned long event,
3112 struct net_device *bond_dev)
3114 struct bonding *event_bond = netdev_priv(bond_dev);
3117 case NETDEV_CHANGENAME:
3118 return bond_event_changename(event_bond);
3119 case NETDEV_UNREGISTER:
3120 bond_remove_proc_entry(event_bond);
3122 case NETDEV_REGISTER:
3123 bond_create_proc_entry(event_bond);
3132 static int bond_slave_netdev_event(unsigned long event,
3133 struct net_device *slave_dev)
3135 struct slave *slave = bond_slave_get_rtnl(slave_dev);
3136 struct bonding *bond;
3137 struct net_device *bond_dev;
3141 /* A netdev event can be generated while enslaving a device
3142 * before netdev_rx_handler_register is called in which case
3143 * slave will be NULL
3147 bond_dev = slave->bond->dev;
3151 case NETDEV_UNREGISTER:
3152 if (bond_dev->type != ARPHRD_ETHER)
3153 bond_release_and_destroy(bond_dev, slave_dev);
3155 bond_release(bond_dev, slave_dev);
3159 old_speed = slave->speed;
3160 old_duplex = slave->duplex;
3162 bond_update_speed_duplex(slave);
3164 if (bond->params.mode == BOND_MODE_8023AD) {
3165 if (old_speed != slave->speed)
3166 bond_3ad_adapter_speed_changed(slave);
3167 if (old_duplex != slave->duplex)
3168 bond_3ad_adapter_duplex_changed(slave);
3173 * ... Or is it this?
3176 case NETDEV_CHANGEMTU:
3178 * TODO: Should slaves be allowed to
3179 * independently alter their MTU? For
3180 * an active-backup bond, slaves need
3181 * not be the same type of device, so
3182 * MTUs may vary. For other modes,
3183 * slaves arguably should have the
3184 * same MTUs. To do this, we'd need to
3185 * take over the slave's change_mtu
3186 * function for the duration of their
3190 case NETDEV_CHANGENAME:
3192 * TODO: handle changing the primary's name
3195 case NETDEV_FEAT_CHANGE:
3196 bond_compute_features(bond);
3198 case NETDEV_RESEND_IGMP:
3199 /* Propagate to master device */
3200 call_netdevice_notifiers(event, slave->bond->dev);
3210 * bond_netdev_event: handle netdev notifier chain events.
3212 * This function receives events for the netdev chain. The caller (an
3213 * ioctl handler calling blocking_notifier_call_chain) holds the necessary
3214 * locks for us to safely manipulate the slave devices (RTNL lock,
3217 static int bond_netdev_event(struct notifier_block *this,
3218 unsigned long event, void *ptr)
3220 struct net_device *event_dev = netdev_notifier_info_to_dev(ptr);
3222 pr_debug("event_dev: %s, event: %lx\n",
3223 event_dev ? event_dev->name : "None",
3226 if (!(event_dev->priv_flags & IFF_BONDING))
3229 if (event_dev->flags & IFF_MASTER) {
3230 pr_debug("IFF_MASTER\n");
3231 return bond_master_netdev_event(event, event_dev);
3234 if (event_dev->flags & IFF_SLAVE) {
3235 pr_debug("IFF_SLAVE\n");
3236 return bond_slave_netdev_event(event, event_dev);
3242 static struct notifier_block bond_netdev_notifier = {
3243 .notifier_call = bond_netdev_event,
3246 /*---------------------------- Hashing Policies -----------------------------*/
3249 * Hash for the output device based upon layer 2 data
3251 static int bond_xmit_hash_policy_l2(struct sk_buff *skb, int count)
3253 struct ethhdr *data = (struct ethhdr *)skb->data;
3255 if (skb_headlen(skb) >= offsetof(struct ethhdr, h_proto))
3256 return (data->h_dest[5] ^ data->h_source[5]) % count;
3262 * Hash for the output device based upon layer 2 and layer 3 data. If
3263 * the packet is not IP, fall back on bond_xmit_hash_policy_l2()
3265 static int bond_xmit_hash_policy_l23(struct sk_buff *skb, int count)
3267 const struct ethhdr *data;
3268 const struct iphdr *iph;
3269 const struct ipv6hdr *ipv6h;
3271 const __be32 *s, *d;
3273 if (skb->protocol == htons(ETH_P_IP) &&
3274 pskb_network_may_pull(skb, sizeof(*iph))) {
3276 data = (struct ethhdr *)skb->data;
3277 return ((ntohl(iph->saddr ^ iph->daddr) & 0xffff) ^
3278 (data->h_dest[5] ^ data->h_source[5])) % count;
3279 } else if (skb->protocol == htons(ETH_P_IPV6) &&
3280 pskb_network_may_pull(skb, sizeof(*ipv6h))) {
3281 ipv6h = ipv6_hdr(skb);
3282 data = (struct ethhdr *)skb->data;
3283 s = &ipv6h->saddr.s6_addr32[0];
3284 d = &ipv6h->daddr.s6_addr32[0];
3285 v6hash = (s[1] ^ d[1]) ^ (s[2] ^ d[2]) ^ (s[3] ^ d[3]);
3286 v6hash ^= (v6hash >> 24) ^ (v6hash >> 16) ^ (v6hash >> 8);
3287 return (v6hash ^ data->h_dest[5] ^ data->h_source[5]) % count;
3290 return bond_xmit_hash_policy_l2(skb, count);
3294 * Hash for the output device based upon layer 3 and layer 4 data. If
3295 * the packet is a frag or not TCP or UDP, just use layer 3 data. If it is
3296 * altogether not IP, fall back on bond_xmit_hash_policy_l2()
3298 static int bond_xmit_hash_policy_l34(struct sk_buff *skb, int count)
3301 const struct iphdr *iph;
3302 const struct ipv6hdr *ipv6h;
3303 const __be32 *s, *d;
3304 const __be16 *l4 = NULL;
3306 int noff = skb_network_offset(skb);
3309 if (skb->protocol == htons(ETH_P_IP) &&
3310 pskb_may_pull(skb, noff + sizeof(*iph))) {
3312 poff = proto_ports_offset(iph->protocol);
3314 if (!ip_is_fragment(iph) && poff >= 0) {
3315 l4 = skb_header_pointer(skb, noff + (iph->ihl << 2) + poff,
3318 layer4_xor = ntohs(l4[0] ^ l4[1]);
3320 return (layer4_xor ^
3321 ((ntohl(iph->saddr ^ iph->daddr)) & 0xffff)) % count;
3322 } else if (skb->protocol == htons(ETH_P_IPV6) &&
3323 pskb_may_pull(skb, noff + sizeof(*ipv6h))) {
3324 ipv6h = ipv6_hdr(skb);
3325 poff = proto_ports_offset(ipv6h->nexthdr);
3327 l4 = skb_header_pointer(skb, noff + sizeof(*ipv6h) + poff,
3330 layer4_xor = ntohs(l4[0] ^ l4[1]);
3332 s = &ipv6h->saddr.s6_addr32[0];
3333 d = &ipv6h->daddr.s6_addr32[0];
3334 layer4_xor ^= (s[1] ^ d[1]) ^ (s[2] ^ d[2]) ^ (s[3] ^ d[3]);
3335 layer4_xor ^= (layer4_xor >> 24) ^ (layer4_xor >> 16) ^
3337 return layer4_xor % count;
3340 return bond_xmit_hash_policy_l2(skb, count);
3343 /*-------------------------- Device entry points ----------------------------*/
3345 static void bond_work_init_all(struct bonding *bond)
3347 INIT_DELAYED_WORK(&bond->mcast_work,
3348 bond_resend_igmp_join_requests_delayed);
3349 INIT_DELAYED_WORK(&bond->alb_work, bond_alb_monitor);
3350 INIT_DELAYED_WORK(&bond->mii_work, bond_mii_monitor);
3351 if (bond->params.mode == BOND_MODE_ACTIVEBACKUP)
3352 INIT_DELAYED_WORK(&bond->arp_work, bond_activebackup_arp_mon);
3354 INIT_DELAYED_WORK(&bond->arp_work, bond_loadbalance_arp_mon);
3355 INIT_DELAYED_WORK(&bond->ad_work, bond_3ad_state_machine_handler);
3358 static void bond_work_cancel_all(struct bonding *bond)
3360 cancel_delayed_work_sync(&bond->mii_work);
3361 cancel_delayed_work_sync(&bond->arp_work);
3362 cancel_delayed_work_sync(&bond->alb_work);
3363 cancel_delayed_work_sync(&bond->ad_work);
3364 cancel_delayed_work_sync(&bond->mcast_work);
3367 static int bond_open(struct net_device *bond_dev)
3369 struct bonding *bond = netdev_priv(bond_dev);
3370 struct slave *slave;
3373 /* reset slave->backup and slave->inactive */
3374 read_lock(&bond->lock);
3375 if (bond->slave_cnt > 0) {
3376 read_lock(&bond->curr_slave_lock);
3377 bond_for_each_slave(bond, slave, i) {
3378 if ((bond->params.mode == BOND_MODE_ACTIVEBACKUP)
3379 && (slave != bond->curr_active_slave)) {
3380 bond_set_slave_inactive_flags(slave);
3382 bond_set_slave_active_flags(slave);
3385 read_unlock(&bond->curr_slave_lock);
3387 read_unlock(&bond->lock);
3389 bond_work_init_all(bond);
3391 if (bond_is_lb(bond)) {
3392 /* bond_alb_initialize must be called before the timer
3395 if (bond_alb_initialize(bond, (bond->params.mode == BOND_MODE_ALB)))
3397 queue_delayed_work(bond->wq, &bond->alb_work, 0);
3400 if (bond->params.miimon) /* link check interval, in milliseconds. */
3401 queue_delayed_work(bond->wq, &bond->mii_work, 0);
3403 if (bond->params.arp_interval) { /* arp interval, in milliseconds. */
3404 queue_delayed_work(bond->wq, &bond->arp_work, 0);
3405 if (bond->params.arp_validate)
3406 bond->recv_probe = bond_arp_rcv;
3409 if (bond->params.mode == BOND_MODE_8023AD) {
3410 queue_delayed_work(bond->wq, &bond->ad_work, 0);
3411 /* register to receive LACPDUs */
3412 bond->recv_probe = bond_3ad_lacpdu_recv;
3413 bond_3ad_initiate_agg_selection(bond, 1);
3419 static int bond_close(struct net_device *bond_dev)
3421 struct bonding *bond = netdev_priv(bond_dev);
3423 write_lock_bh(&bond->lock);
3424 bond->send_peer_notif = 0;
3425 write_unlock_bh(&bond->lock);
3427 bond_work_cancel_all(bond);
3428 if (bond_is_lb(bond)) {
3429 /* Must be called only after all
3430 * slaves have been released
3432 bond_alb_deinitialize(bond);
3434 bond->recv_probe = NULL;
3439 static struct rtnl_link_stats64 *bond_get_stats(struct net_device *bond_dev,
3440 struct rtnl_link_stats64 *stats)
3442 struct bonding *bond = netdev_priv(bond_dev);
3443 struct rtnl_link_stats64 temp;
3444 struct slave *slave;
3447 memset(stats, 0, sizeof(*stats));
3449 read_lock_bh(&bond->lock);
3451 bond_for_each_slave(bond, slave, i) {
3452 const struct rtnl_link_stats64 *sstats =
3453 dev_get_stats(slave->dev, &temp);
3455 stats->rx_packets += sstats->rx_packets;
3456 stats->rx_bytes += sstats->rx_bytes;
3457 stats->rx_errors += sstats->rx_errors;
3458 stats->rx_dropped += sstats->rx_dropped;
3460 stats->tx_packets += sstats->tx_packets;
3461 stats->tx_bytes += sstats->tx_bytes;
3462 stats->tx_errors += sstats->tx_errors;
3463 stats->tx_dropped += sstats->tx_dropped;
3465 stats->multicast += sstats->multicast;
3466 stats->collisions += sstats->collisions;
3468 stats->rx_length_errors += sstats->rx_length_errors;
3469 stats->rx_over_errors += sstats->rx_over_errors;
3470 stats->rx_crc_errors += sstats->rx_crc_errors;
3471 stats->rx_frame_errors += sstats->rx_frame_errors;
3472 stats->rx_fifo_errors += sstats->rx_fifo_errors;
3473 stats->rx_missed_errors += sstats->rx_missed_errors;
3475 stats->tx_aborted_errors += sstats->tx_aborted_errors;
3476 stats->tx_carrier_errors += sstats->tx_carrier_errors;
3477 stats->tx_fifo_errors += sstats->tx_fifo_errors;
3478 stats->tx_heartbeat_errors += sstats->tx_heartbeat_errors;
3479 stats->tx_window_errors += sstats->tx_window_errors;
3482 read_unlock_bh(&bond->lock);
3487 static int bond_do_ioctl(struct net_device *bond_dev, struct ifreq *ifr, int cmd)
3489 struct net_device *slave_dev = NULL;
3490 struct ifbond k_binfo;
3491 struct ifbond __user *u_binfo = NULL;
3492 struct ifslave k_sinfo;
3493 struct ifslave __user *u_sinfo = NULL;
3494 struct mii_ioctl_data *mii = NULL;
3498 pr_debug("bond_ioctl: master=%s, cmd=%d\n", bond_dev->name, cmd);
3510 * We do this again just in case we were called by SIOCGMIIREG
3511 * instead of SIOCGMIIPHY.
3518 if (mii->reg_num == 1) {
3519 struct bonding *bond = netdev_priv(bond_dev);
3521 read_lock(&bond->lock);
3522 read_lock(&bond->curr_slave_lock);
3523 if (netif_carrier_ok(bond->dev))
3524 mii->val_out = BMSR_LSTATUS;
3526 read_unlock(&bond->curr_slave_lock);
3527 read_unlock(&bond->lock);
3531 case BOND_INFO_QUERY_OLD:
3532 case SIOCBONDINFOQUERY:
3533 u_binfo = (struct ifbond __user *)ifr->ifr_data;
3535 if (copy_from_user(&k_binfo, u_binfo, sizeof(ifbond)))
3538 res = bond_info_query(bond_dev, &k_binfo);
3540 copy_to_user(u_binfo, &k_binfo, sizeof(ifbond)))
3544 case BOND_SLAVE_INFO_QUERY_OLD:
3545 case SIOCBONDSLAVEINFOQUERY:
3546 u_sinfo = (struct ifslave __user *)ifr->ifr_data;
3548 if (copy_from_user(&k_sinfo, u_sinfo, sizeof(ifslave)))
3551 res = bond_slave_info_query(bond_dev, &k_sinfo);
3553 copy_to_user(u_sinfo, &k_sinfo, sizeof(ifslave)))
3562 net = dev_net(bond_dev);
3564 if (!ns_capable(net->user_ns, CAP_NET_ADMIN))
3567 slave_dev = dev_get_by_name(net, ifr->ifr_slave);
3569 pr_debug("slave_dev=%p:\n", slave_dev);
3574 pr_debug("slave_dev->name=%s:\n", slave_dev->name);
3576 case BOND_ENSLAVE_OLD:
3577 case SIOCBONDENSLAVE:
3578 res = bond_enslave(bond_dev, slave_dev);
3580 case BOND_RELEASE_OLD:
3581 case SIOCBONDRELEASE:
3582 res = bond_release(bond_dev, slave_dev);
3584 case BOND_SETHWADDR_OLD:
3585 case SIOCBONDSETHWADDR:
3586 bond_set_dev_addr(bond_dev, slave_dev);
3589 case BOND_CHANGE_ACTIVE_OLD:
3590 case SIOCBONDCHANGEACTIVE:
3591 res = bond_ioctl_change_active(bond_dev, slave_dev);
3603 static void bond_change_rx_flags(struct net_device *bond_dev, int change)
3605 struct bonding *bond = netdev_priv(bond_dev);
3607 if (change & IFF_PROMISC)
3608 bond_set_promiscuity(bond,
3609 bond_dev->flags & IFF_PROMISC ? 1 : -1);
3611 if (change & IFF_ALLMULTI)
3612 bond_set_allmulti(bond,
3613 bond_dev->flags & IFF_ALLMULTI ? 1 : -1);
3616 static void bond_set_rx_mode(struct net_device *bond_dev)
3618 struct bonding *bond = netdev_priv(bond_dev);
3619 struct slave *slave;
3622 read_lock(&bond->lock);
3624 if (USES_PRIMARY(bond->params.mode)) {
3625 read_lock(&bond->curr_slave_lock);
3626 slave = bond->curr_active_slave;
3628 dev_uc_sync(slave->dev, bond_dev);
3629 dev_mc_sync(slave->dev, bond_dev);
3631 read_unlock(&bond->curr_slave_lock);
3633 bond_for_each_slave(bond, slave, i) {
3634 dev_uc_sync_multiple(slave->dev, bond_dev);
3635 dev_mc_sync_multiple(slave->dev, bond_dev);
3639 read_unlock(&bond->lock);
3642 static int bond_neigh_init(struct neighbour *n)
3644 struct bonding *bond = netdev_priv(n->dev);
3645 struct slave *slave = bond->first_slave;
3646 const struct net_device_ops *slave_ops;
3647 struct neigh_parms parms;
3653 slave_ops = slave->dev->netdev_ops;
3655 if (!slave_ops->ndo_neigh_setup)
3658 parms.neigh_setup = NULL;
3659 parms.neigh_cleanup = NULL;
3660 ret = slave_ops->ndo_neigh_setup(slave->dev, &parms);
3665 * Assign slave's neigh_cleanup to neighbour in case cleanup is called
3666 * after the last slave has been detached. Assumes that all slaves
3667 * utilize the same neigh_cleanup (true at this writing as only user
3670 n->parms->neigh_cleanup = parms.neigh_cleanup;
3672 if (!parms.neigh_setup)
3675 return parms.neigh_setup(n);
3679 * The bonding ndo_neigh_setup is called at init time beofre any
3680 * slave exists. So we must declare proxy setup function which will
3681 * be used at run time to resolve the actual slave neigh param setup.
3683 static int bond_neigh_setup(struct net_device *dev,
3684 struct neigh_parms *parms)
3686 parms->neigh_setup = bond_neigh_init;
3692 * Change the MTU of all of a master's slaves to match the master
3694 static int bond_change_mtu(struct net_device *bond_dev, int new_mtu)
3696 struct bonding *bond = netdev_priv(bond_dev);
3697 struct slave *slave, *stop_at;
3701 pr_debug("bond=%p, name=%s, new_mtu=%d\n", bond,
3702 (bond_dev ? bond_dev->name : "None"), new_mtu);
3704 /* Can't hold bond->lock with bh disabled here since
3705 * some base drivers panic. On the other hand we can't
3706 * hold bond->lock without bh disabled because we'll
3707 * deadlock. The only solution is to rely on the fact
3708 * that we're under rtnl_lock here, and the slaves
3709 * list won't change. This doesn't solve the problem
3710 * of setting the slave's MTU while it is
3711 * transmitting, but the assumption is that the base
3712 * driver can handle that.
3714 * TODO: figure out a way to safely iterate the slaves
3715 * list, but without holding a lock around the actual
3716 * call to the base driver.
3719 bond_for_each_slave(bond, slave, i) {
3720 pr_debug("s %p s->p %p c_m %p\n",
3723 slave->dev->netdev_ops->ndo_change_mtu);
3725 res = dev_set_mtu(slave->dev, new_mtu);
3728 /* If we failed to set the slave's mtu to the new value
3729 * we must abort the operation even in ACTIVE_BACKUP
3730 * mode, because if we allow the backup slaves to have
3731 * different mtu values than the active slave we'll
3732 * need to change their mtu when doing a failover. That
3733 * means changing their mtu from timer context, which
3734 * is probably not a good idea.
3736 pr_debug("err %d %s\n", res, slave->dev->name);
3741 bond_dev->mtu = new_mtu;
3746 /* unwind from head to the slave that failed */
3748 bond_for_each_slave_from_to(bond, slave, i, bond->first_slave, stop_at) {
3751 tmp_res = dev_set_mtu(slave->dev, bond_dev->mtu);
3753 pr_debug("unwind err %d dev %s\n",
3754 tmp_res, slave->dev->name);
3764 * Note that many devices must be down to change the HW address, and
3765 * downing the master releases all slaves. We can make bonds full of
3766 * bonding devices to test this, however.
3768 static int bond_set_mac_address(struct net_device *bond_dev, void *addr)
3770 struct bonding *bond = netdev_priv(bond_dev);
3771 struct sockaddr *sa = addr, tmp_sa;
3772 struct slave *slave, *stop_at;
3776 if (bond->params.mode == BOND_MODE_ALB)
3777 return bond_alb_set_mac_address(bond_dev, addr);
3780 pr_debug("bond=%p, name=%s\n",
3781 bond, bond_dev ? bond_dev->name : "None");
3783 /* If fail_over_mac is enabled, do nothing and return success.
3784 * Returning an error causes ifenslave to fail.
3786 if (bond->params.fail_over_mac)
3789 if (!is_valid_ether_addr(sa->sa_data))
3790 return -EADDRNOTAVAIL;
3792 /* Can't hold bond->lock with bh disabled here since
3793 * some base drivers panic. On the other hand we can't
3794 * hold bond->lock without bh disabled because we'll
3795 * deadlock. The only solution is to rely on the fact
3796 * that we're under rtnl_lock here, and the slaves
3797 * list won't change. This doesn't solve the problem
3798 * of setting the slave's hw address while it is
3799 * transmitting, but the assumption is that the base
3800 * driver can handle that.
3802 * TODO: figure out a way to safely iterate the slaves
3803 * list, but without holding a lock around the actual
3804 * call to the base driver.
3807 bond_for_each_slave(bond, slave, i) {
3808 const struct net_device_ops *slave_ops = slave->dev->netdev_ops;
3809 pr_debug("slave %p %s\n", slave, slave->dev->name);
3811 if (slave_ops->ndo_set_mac_address == NULL) {
3813 pr_debug("EOPNOTSUPP %s\n", slave->dev->name);
3817 res = dev_set_mac_address(slave->dev, addr);
3819 /* TODO: consider downing the slave
3821 * User should expect communications
3822 * breakage anyway until ARP finish
3825 pr_debug("err %d %s\n", res, slave->dev->name);
3831 memcpy(bond_dev->dev_addr, sa->sa_data, bond_dev->addr_len);
3835 memcpy(tmp_sa.sa_data, bond_dev->dev_addr, bond_dev->addr_len);
3836 tmp_sa.sa_family = bond_dev->type;
3838 /* unwind from head to the slave that failed */
3840 bond_for_each_slave_from_to(bond, slave, i, bond->first_slave, stop_at) {
3843 tmp_res = dev_set_mac_address(slave->dev, &tmp_sa);
3845 pr_debug("unwind err %d dev %s\n",
3846 tmp_res, slave->dev->name);
3853 static int bond_xmit_roundrobin(struct sk_buff *skb, struct net_device *bond_dev)
3855 struct bonding *bond = netdev_priv(bond_dev);
3856 struct slave *slave, *start_at;
3857 int i, slave_no, res = 1;
3858 struct iphdr *iph = ip_hdr(skb);
3861 * Start with the curr_active_slave that joined the bond as the
3862 * default for sending IGMP traffic. For failover purposes one
3863 * needs to maintain some consistency for the interface that will
3864 * send the join/membership reports. The curr_active_slave found
3865 * will send all of this type of traffic.
3867 if ((iph->protocol == IPPROTO_IGMP) &&
3868 (skb->protocol == htons(ETH_P_IP))) {
3870 read_lock(&bond->curr_slave_lock);
3871 slave = bond->curr_active_slave;
3872 read_unlock(&bond->curr_slave_lock);
3878 * Concurrent TX may collide on rr_tx_counter; we accept
3879 * that as being rare enough not to justify using an
3882 slave_no = bond->rr_tx_counter++ % bond->slave_cnt;
3884 bond_for_each_slave(bond, slave, i) {
3892 bond_for_each_slave_from(bond, slave, i, start_at) {
3893 if (IS_UP(slave->dev) &&
3894 (slave->link == BOND_LINK_UP) &&
3895 bond_is_active_slave(slave)) {
3896 res = bond_dev_queue_xmit(bond, skb, slave->dev);
3903 /* no suitable interface, frame not sent */
3907 return NETDEV_TX_OK;
3912 * in active-backup mode, we know that bond->curr_active_slave is always valid if
3913 * the bond has a usable interface.
3915 static int bond_xmit_activebackup(struct sk_buff *skb, struct net_device *bond_dev)
3917 struct bonding *bond = netdev_priv(bond_dev);
3920 read_lock(&bond->curr_slave_lock);
3922 if (bond->curr_active_slave)
3923 res = bond_dev_queue_xmit(bond, skb,
3924 bond->curr_active_slave->dev);
3926 read_unlock(&bond->curr_slave_lock);
3929 /* no suitable interface, frame not sent */
3932 return NETDEV_TX_OK;
3936 * In bond_xmit_xor() , we determine the output device by using a pre-
3937 * determined xmit_hash_policy(), If the selected device is not enabled,
3938 * find the next active slave.
3940 static int bond_xmit_xor(struct sk_buff *skb, struct net_device *bond_dev)
3942 struct bonding *bond = netdev_priv(bond_dev);
3943 struct slave *slave, *start_at;
3948 slave_no = bond->xmit_hash_policy(skb, bond->slave_cnt);
3950 bond_for_each_slave(bond, slave, i) {
3958 bond_for_each_slave_from(bond, slave, i, start_at) {
3959 if (IS_UP(slave->dev) &&
3960 (slave->link == BOND_LINK_UP) &&
3961 bond_is_active_slave(slave)) {
3962 res = bond_dev_queue_xmit(bond, skb, slave->dev);
3968 /* no suitable interface, frame not sent */
3972 return NETDEV_TX_OK;
3976 * in broadcast mode, we send everything to all usable interfaces.
3978 static int bond_xmit_broadcast(struct sk_buff *skb, struct net_device *bond_dev)
3980 struct bonding *bond = netdev_priv(bond_dev);
3981 struct slave *slave, *start_at;
3982 struct net_device *tx_dev = NULL;
3986 read_lock(&bond->curr_slave_lock);
3987 start_at = bond->curr_active_slave;
3988 read_unlock(&bond->curr_slave_lock);
3993 bond_for_each_slave_from(bond, slave, i, start_at) {
3994 if (IS_UP(slave->dev) &&
3995 (slave->link == BOND_LINK_UP) &&
3996 bond_is_active_slave(slave)) {
3998 struct sk_buff *skb2 = skb_clone(skb, GFP_ATOMIC);
4000 pr_err("%s: Error: bond_xmit_broadcast(): skb_clone() failed\n",
4005 res = bond_dev_queue_xmit(bond, skb2, tx_dev);
4011 tx_dev = slave->dev;
4016 res = bond_dev_queue_xmit(bond, skb, tx_dev);
4020 /* no suitable interface, frame not sent */
4023 /* frame sent to all suitable interfaces */
4024 return NETDEV_TX_OK;
4027 /*------------------------- Device initialization ---------------------------*/
4029 static void bond_set_xmit_hash_policy(struct bonding *bond)
4031 switch (bond->params.xmit_policy) {
4032 case BOND_XMIT_POLICY_LAYER23:
4033 bond->xmit_hash_policy = bond_xmit_hash_policy_l23;
4035 case BOND_XMIT_POLICY_LAYER34:
4036 bond->xmit_hash_policy = bond_xmit_hash_policy_l34;
4038 case BOND_XMIT_POLICY_LAYER2:
4040 bond->xmit_hash_policy = bond_xmit_hash_policy_l2;
4046 * Lookup the slave that corresponds to a qid
4048 static inline int bond_slave_override(struct bonding *bond,
4049 struct sk_buff *skb)
4052 struct slave *slave = NULL;
4053 struct slave *check_slave;
4055 if (!skb->queue_mapping)
4058 /* Find out if any slaves have the same mapping as this skb. */
4059 bond_for_each_slave(bond, check_slave, i) {
4060 if (check_slave->queue_id == skb->queue_mapping) {
4061 slave = check_slave;
4066 /* If the slave isn't UP, use default transmit policy. */
4067 if (slave && slave->queue_id && IS_UP(slave->dev) &&
4068 (slave->link == BOND_LINK_UP)) {
4069 res = bond_dev_queue_xmit(bond, skb, slave->dev);
4076 static u16 bond_select_queue(struct net_device *dev, struct sk_buff *skb)
4079 * This helper function exists to help dev_pick_tx get the correct
4080 * destination queue. Using a helper function skips a call to
4081 * skb_tx_hash and will put the skbs in the queue we expect on their
4082 * way down to the bonding driver.
4084 u16 txq = skb_rx_queue_recorded(skb) ? skb_get_rx_queue(skb) : 0;
4087 * Save the original txq to restore before passing to the driver
4089 qdisc_skb_cb(skb)->slave_dev_queue_mapping = skb->queue_mapping;
4091 if (unlikely(txq >= dev->real_num_tx_queues)) {
4093 txq -= dev->real_num_tx_queues;
4094 } while (txq >= dev->real_num_tx_queues);
4099 static netdev_tx_t __bond_start_xmit(struct sk_buff *skb, struct net_device *dev)
4101 struct bonding *bond = netdev_priv(dev);
4103 if (TX_QUEUE_OVERRIDE(bond->params.mode)) {
4104 if (!bond_slave_override(bond, skb))
4105 return NETDEV_TX_OK;
4108 switch (bond->params.mode) {
4109 case BOND_MODE_ROUNDROBIN:
4110 return bond_xmit_roundrobin(skb, dev);
4111 case BOND_MODE_ACTIVEBACKUP:
4112 return bond_xmit_activebackup(skb, dev);
4114 return bond_xmit_xor(skb, dev);
4115 case BOND_MODE_BROADCAST:
4116 return bond_xmit_broadcast(skb, dev);
4117 case BOND_MODE_8023AD:
4118 return bond_3ad_xmit_xor(skb, dev);
4121 return bond_alb_xmit(skb, dev);
4123 /* Should never happen, mode already checked */
4124 pr_err("%s: Error: Unknown bonding mode %d\n",
4125 dev->name, bond->params.mode);
4128 return NETDEV_TX_OK;
4132 static netdev_tx_t bond_start_xmit(struct sk_buff *skb, struct net_device *dev)
4134 struct bonding *bond = netdev_priv(dev);
4135 netdev_tx_t ret = NETDEV_TX_OK;
4138 * If we risk deadlock from transmitting this in the
4139 * netpoll path, tell netpoll to queue the frame for later tx
4141 if (is_netpoll_tx_blocked(dev))
4142 return NETDEV_TX_BUSY;
4144 read_lock(&bond->lock);
4146 if (bond->slave_cnt)
4147 ret = __bond_start_xmit(skb, dev);
4151 read_unlock(&bond->lock);
4157 * set bond mode specific net device operations
4159 void bond_set_mode_ops(struct bonding *bond, int mode)
4161 struct net_device *bond_dev = bond->dev;
4164 case BOND_MODE_ROUNDROBIN:
4166 case BOND_MODE_ACTIVEBACKUP:
4169 bond_set_xmit_hash_policy(bond);
4171 case BOND_MODE_BROADCAST:
4173 case BOND_MODE_8023AD:
4174 bond_set_xmit_hash_policy(bond);
4181 /* Should never happen, mode already checked */
4182 pr_err("%s: Error: Unknown bonding mode %d\n",
4183 bond_dev->name, mode);
4188 static int bond_ethtool_get_settings(struct net_device *bond_dev,
4189 struct ethtool_cmd *ecmd)
4191 struct bonding *bond = netdev_priv(bond_dev);
4192 struct slave *slave;
4194 unsigned long speed = 0;
4196 ecmd->duplex = DUPLEX_UNKNOWN;
4197 ecmd->port = PORT_OTHER;
4199 /* Since SLAVE_IS_OK returns false for all inactive or down slaves, we
4200 * do not need to check mode. Though link speed might not represent
4201 * the true receive or transmit bandwidth (not all modes are symmetric)
4202 * this is an accurate maximum.
4204 read_lock(&bond->lock);
4205 bond_for_each_slave(bond, slave, i) {
4206 if (SLAVE_IS_OK(slave)) {
4207 if (slave->speed != SPEED_UNKNOWN)
4208 speed += slave->speed;
4209 if (ecmd->duplex == DUPLEX_UNKNOWN &&
4210 slave->duplex != DUPLEX_UNKNOWN)
4211 ecmd->duplex = slave->duplex;
4214 ethtool_cmd_speed_set(ecmd, speed ? : SPEED_UNKNOWN);
4215 read_unlock(&bond->lock);
4219 static void bond_ethtool_get_drvinfo(struct net_device *bond_dev,
4220 struct ethtool_drvinfo *drvinfo)
4222 strlcpy(drvinfo->driver, DRV_NAME, sizeof(drvinfo->driver));
4223 strlcpy(drvinfo->version, DRV_VERSION, sizeof(drvinfo->version));
4224 snprintf(drvinfo->fw_version, sizeof(drvinfo->fw_version), "%d",
4228 static const struct ethtool_ops bond_ethtool_ops = {
4229 .get_drvinfo = bond_ethtool_get_drvinfo,
4230 .get_settings = bond_ethtool_get_settings,
4231 .get_link = ethtool_op_get_link,
4234 static const struct net_device_ops bond_netdev_ops = {
4235 .ndo_init = bond_init,
4236 .ndo_uninit = bond_uninit,
4237 .ndo_open = bond_open,
4238 .ndo_stop = bond_close,
4239 .ndo_start_xmit = bond_start_xmit,
4240 .ndo_select_queue = bond_select_queue,
4241 .ndo_get_stats64 = bond_get_stats,
4242 .ndo_do_ioctl = bond_do_ioctl,
4243 .ndo_change_rx_flags = bond_change_rx_flags,
4244 .ndo_set_rx_mode = bond_set_rx_mode,
4245 .ndo_change_mtu = bond_change_mtu,
4246 .ndo_set_mac_address = bond_set_mac_address,
4247 .ndo_neigh_setup = bond_neigh_setup,
4248 .ndo_vlan_rx_add_vid = bond_vlan_rx_add_vid,
4249 .ndo_vlan_rx_kill_vid = bond_vlan_rx_kill_vid,
4250 #ifdef CONFIG_NET_POLL_CONTROLLER
4251 .ndo_netpoll_setup = bond_netpoll_setup,
4252 .ndo_netpoll_cleanup = bond_netpoll_cleanup,
4253 .ndo_poll_controller = bond_poll_controller,
4255 .ndo_add_slave = bond_enslave,
4256 .ndo_del_slave = bond_release,
4257 .ndo_fix_features = bond_fix_features,
4260 static const struct device_type bond_type = {
4264 static void bond_destructor(struct net_device *bond_dev)
4266 struct bonding *bond = netdev_priv(bond_dev);
4268 destroy_workqueue(bond->wq);
4269 free_netdev(bond_dev);
4272 static void bond_setup(struct net_device *bond_dev)
4274 struct bonding *bond = netdev_priv(bond_dev);
4276 /* initialize rwlocks */
4277 rwlock_init(&bond->lock);
4278 rwlock_init(&bond->curr_slave_lock);
4280 bond->params = bonding_defaults;
4282 /* Initialize pointers */
4283 bond->dev = bond_dev;
4284 INIT_LIST_HEAD(&bond->vlan_list);
4286 /* Initialize the device entry points */
4287 ether_setup(bond_dev);
4288 bond_dev->netdev_ops = &bond_netdev_ops;
4289 bond_dev->ethtool_ops = &bond_ethtool_ops;
4290 bond_set_mode_ops(bond, bond->params.mode);
4292 bond_dev->destructor = bond_destructor;
4294 SET_NETDEV_DEVTYPE(bond_dev, &bond_type);
4296 /* Initialize the device options */
4297 bond_dev->tx_queue_len = 0;
4298 bond_dev->flags |= IFF_MASTER|IFF_MULTICAST;
4299 bond_dev->priv_flags |= IFF_BONDING;
4300 bond_dev->priv_flags &= ~(IFF_XMIT_DST_RELEASE | IFF_TX_SKB_SHARING);
4302 /* At first, we block adding VLANs. That's the only way to
4303 * prevent problems that occur when adding VLANs over an
4304 * empty bond. The block will be removed once non-challenged
4305 * slaves are enslaved.
4307 bond_dev->features |= NETIF_F_VLAN_CHALLENGED;
4309 /* don't acquire bond device's netif_tx_lock when
4311 bond_dev->features |= NETIF_F_LLTX;
4313 /* By default, we declare the bond to be fully
4314 * VLAN hardware accelerated capable. Special
4315 * care is taken in the various xmit functions
4316 * when there are slaves that are not hw accel
4320 bond_dev->hw_features = BOND_VLAN_FEATURES |
4321 NETIF_F_HW_VLAN_CTAG_TX |
4322 NETIF_F_HW_VLAN_CTAG_RX |
4323 NETIF_F_HW_VLAN_CTAG_FILTER;
4325 bond_dev->hw_features &= ~(NETIF_F_ALL_CSUM & ~NETIF_F_HW_CSUM);
4326 bond_dev->features |= bond_dev->hw_features;
4330 * Destroy a bonding device.
4331 * Must be under rtnl_lock when this function is called.
4333 static void bond_uninit(struct net_device *bond_dev)
4335 struct bonding *bond = netdev_priv(bond_dev);
4336 struct vlan_entry *vlan, *tmp;
4338 bond_netpoll_cleanup(bond_dev);
4340 /* Release the bonded slaves */
4341 while (bond->first_slave != NULL)
4342 __bond_release_one(bond_dev, bond->first_slave->dev, true);
4343 pr_info("%s: released all slaves\n", bond_dev->name);
4345 list_del(&bond->bond_list);
4347 bond_debug_unregister(bond);
4349 list_for_each_entry_safe(vlan, tmp, &bond->vlan_list, vlan_list) {
4350 list_del(&vlan->vlan_list);
4355 /*------------------------- Module initialization ---------------------------*/
4358 * Convert string input module parms. Accept either the
4359 * number of the mode or its string name. A bit complicated because
4360 * some mode names are substrings of other names, and calls from sysfs
4361 * may have whitespace in the name (trailing newlines, for example).
4363 int bond_parse_parm(const char *buf, const struct bond_parm_tbl *tbl)
4365 int modeint = -1, i, rv;
4366 char *p, modestr[BOND_MAX_MODENAME_LEN + 1] = { 0, };
4368 for (p = (char *)buf; *p; p++)
4369 if (!(isdigit(*p) || isspace(*p)))
4373 rv = sscanf(buf, "%20s", modestr);
4375 rv = sscanf(buf, "%d", &modeint);
4380 for (i = 0; tbl[i].modename; i++) {
4381 if (modeint == tbl[i].mode)
4383 if (strcmp(modestr, tbl[i].modename) == 0)
4390 static int bond_check_params(struct bond_params *params)
4392 int arp_validate_value, fail_over_mac_value, primary_reselect_value, i;
4393 int arp_all_targets_value;
4396 * Convert string parameters.
4399 bond_mode = bond_parse_parm(mode, bond_mode_tbl);
4400 if (bond_mode == -1) {
4401 pr_err("Error: Invalid bonding mode \"%s\"\n",
4402 mode == NULL ? "NULL" : mode);
4407 if (xmit_hash_policy) {
4408 if ((bond_mode != BOND_MODE_XOR) &&
4409 (bond_mode != BOND_MODE_8023AD)) {
4410 pr_info("xmit_hash_policy param is irrelevant in mode %s\n",
4411 bond_mode_name(bond_mode));
4413 xmit_hashtype = bond_parse_parm(xmit_hash_policy,
4415 if (xmit_hashtype == -1) {
4416 pr_err("Error: Invalid xmit_hash_policy \"%s\"\n",
4417 xmit_hash_policy == NULL ? "NULL" :
4425 if (bond_mode != BOND_MODE_8023AD) {
4426 pr_info("lacp_rate param is irrelevant in mode %s\n",
4427 bond_mode_name(bond_mode));
4429 lacp_fast = bond_parse_parm(lacp_rate, bond_lacp_tbl);
4430 if (lacp_fast == -1) {
4431 pr_err("Error: Invalid lacp rate \"%s\"\n",
4432 lacp_rate == NULL ? "NULL" : lacp_rate);
4439 params->ad_select = bond_parse_parm(ad_select, ad_select_tbl);
4440 if (params->ad_select == -1) {
4441 pr_err("Error: Invalid ad_select \"%s\"\n",
4442 ad_select == NULL ? "NULL" : ad_select);
4446 if (bond_mode != BOND_MODE_8023AD) {
4447 pr_warning("ad_select param only affects 802.3ad mode\n");
4450 params->ad_select = BOND_AD_STABLE;
4453 if (max_bonds < 0) {
4454 pr_warning("Warning: max_bonds (%d) not in range %d-%d, so it was reset to BOND_DEFAULT_MAX_BONDS (%d)\n",
4455 max_bonds, 0, INT_MAX, BOND_DEFAULT_MAX_BONDS);
4456 max_bonds = BOND_DEFAULT_MAX_BONDS;
4460 pr_warning("Warning: miimon module parameter (%d), not in range 0-%d, so it was reset to %d\n",
4461 miimon, INT_MAX, BOND_LINK_MON_INTERV);
4462 miimon = BOND_LINK_MON_INTERV;
4466 pr_warning("Warning: updelay module parameter (%d), not in range 0-%d, so it was reset to 0\n",
4471 if (downdelay < 0) {
4472 pr_warning("Warning: downdelay module parameter (%d), not in range 0-%d, so it was reset to 0\n",
4473 downdelay, INT_MAX);
4477 if ((use_carrier != 0) && (use_carrier != 1)) {
4478 pr_warning("Warning: use_carrier module parameter (%d), not of valid value (0/1), so it was set to 1\n",
4483 if (num_peer_notif < 0 || num_peer_notif > 255) {
4484 pr_warning("Warning: num_grat_arp/num_unsol_na (%d) not in range 0-255 so it was reset to 1\n",
4489 /* reset values for 802.3ad */
4490 if (bond_mode == BOND_MODE_8023AD) {
4492 pr_warning("Warning: miimon must be specified, otherwise bonding will not detect link failure, speed and duplex which are essential for 802.3ad operation\n");
4493 pr_warning("Forcing miimon to 100msec\n");
4498 if (tx_queues < 1 || tx_queues > 255) {
4499 pr_warning("Warning: tx_queues (%d) should be between "
4500 "1 and 255, resetting to %d\n",
4501 tx_queues, BOND_DEFAULT_TX_QUEUES);
4502 tx_queues = BOND_DEFAULT_TX_QUEUES;
4505 if ((all_slaves_active != 0) && (all_slaves_active != 1)) {
4506 pr_warning("Warning: all_slaves_active module parameter (%d), "
4507 "not of valid value (0/1), so it was set to "
4508 "0\n", all_slaves_active);
4509 all_slaves_active = 0;
4512 if (resend_igmp < 0 || resend_igmp > 255) {
4513 pr_warning("Warning: resend_igmp (%d) should be between "
4514 "0 and 255, resetting to %d\n",
4515 resend_igmp, BOND_DEFAULT_RESEND_IGMP);
4516 resend_igmp = BOND_DEFAULT_RESEND_IGMP;
4519 /* reset values for TLB/ALB */
4520 if ((bond_mode == BOND_MODE_TLB) ||
4521 (bond_mode == BOND_MODE_ALB)) {
4523 pr_warning("Warning: miimon must be specified, otherwise bonding will not detect link failure and link speed which are essential for TLB/ALB load balancing\n");
4524 pr_warning("Forcing miimon to 100msec\n");
4529 if (bond_mode == BOND_MODE_ALB) {
4530 pr_notice("In ALB mode you might experience client disconnections upon reconnection of a link if the bonding module updelay parameter (%d msec) is incompatible with the forwarding delay time of the switch\n",
4535 if (updelay || downdelay) {
4536 /* just warn the user the up/down delay will have
4537 * no effect since miimon is zero...
4539 pr_warning("Warning: miimon module parameter not set and updelay (%d) or downdelay (%d) module parameter is set; updelay and downdelay have no effect unless miimon is set\n",
4540 updelay, downdelay);
4543 /* don't allow arp monitoring */
4545 pr_warning("Warning: miimon (%d) and arp_interval (%d) can't be used simultaneously, disabling ARP monitoring\n",
4546 miimon, arp_interval);
4550 if ((updelay % miimon) != 0) {
4551 pr_warning("Warning: updelay (%d) is not a multiple of miimon (%d), updelay rounded to %d ms\n",
4553 (updelay / miimon) * miimon);
4558 if ((downdelay % miimon) != 0) {
4559 pr_warning("Warning: downdelay (%d) is not a multiple of miimon (%d), downdelay rounded to %d ms\n",
4561 (downdelay / miimon) * miimon);
4564 downdelay /= miimon;
4567 if (arp_interval < 0) {
4568 pr_warning("Warning: arp_interval module parameter (%d) , not in range 0-%d, so it was reset to %d\n",
4569 arp_interval, INT_MAX, BOND_LINK_ARP_INTERV);
4570 arp_interval = BOND_LINK_ARP_INTERV;
4573 for (arp_ip_count = 0, i = 0;
4574 (arp_ip_count < BOND_MAX_ARP_TARGETS) && arp_ip_target[i]; i++) {
4575 /* not complete check, but should be good enough to
4577 __be32 ip = in_aton(arp_ip_target[i]);
4578 if (!isdigit(arp_ip_target[i][0]) || ip == 0 ||
4579 ip == htonl(INADDR_BROADCAST)) {
4580 pr_warning("Warning: bad arp_ip_target module parameter (%s), ARP monitoring will not be performed\n",
4584 if (bond_get_targets_ip(arp_target, ip) == -1)
4585 arp_target[arp_ip_count++] = ip;
4587 pr_warning("Warning: duplicate address %pI4 in arp_ip_target, skipping\n",
4592 if (arp_interval && !arp_ip_count) {
4593 /* don't allow arping if no arp_ip_target given... */
4594 pr_warning("Warning: arp_interval module parameter (%d) specified without providing an arp_ip_target parameter, arp_interval was reset to 0\n",
4600 if (bond_mode != BOND_MODE_ACTIVEBACKUP) {
4601 pr_err("arp_validate only supported in active-backup mode\n");
4604 if (!arp_interval) {
4605 pr_err("arp_validate requires arp_interval\n");
4609 arp_validate_value = bond_parse_parm(arp_validate,
4611 if (arp_validate_value == -1) {
4612 pr_err("Error: invalid arp_validate \"%s\"\n",
4613 arp_validate == NULL ? "NULL" : arp_validate);
4617 arp_validate_value = 0;
4619 arp_all_targets_value = 0;
4620 if (arp_all_targets) {
4621 arp_all_targets_value = bond_parse_parm(arp_all_targets,
4622 arp_all_targets_tbl);
4624 if (arp_all_targets_value == -1) {
4625 pr_err("Error: invalid arp_all_targets_value \"%s\"\n",
4627 arp_all_targets_value = 0;
4632 pr_info("MII link monitoring set to %d ms\n", miimon);
4633 } else if (arp_interval) {
4634 pr_info("ARP monitoring set to %d ms, validate %s, with %d target(s):",
4636 arp_validate_tbl[arp_validate_value].modename,
4639 for (i = 0; i < arp_ip_count; i++)
4640 pr_info(" %s", arp_ip_target[i]);
4644 } else if (max_bonds) {
4645 /* miimon and arp_interval not set, we need one so things
4646 * work as expected, see bonding.txt for details
4648 pr_debug("Warning: either miimon or arp_interval and arp_ip_target module parameters must be specified, otherwise bonding will not detect link failures! see bonding.txt for details.\n");
4651 if (primary && !USES_PRIMARY(bond_mode)) {
4652 /* currently, using a primary only makes sense
4653 * in active backup, TLB or ALB modes
4655 pr_warning("Warning: %s primary device specified but has no effect in %s mode\n",
4656 primary, bond_mode_name(bond_mode));
4660 if (primary && primary_reselect) {
4661 primary_reselect_value = bond_parse_parm(primary_reselect,
4663 if (primary_reselect_value == -1) {
4664 pr_err("Error: Invalid primary_reselect \"%s\"\n",
4666 NULL ? "NULL" : primary_reselect);
4670 primary_reselect_value = BOND_PRI_RESELECT_ALWAYS;
4673 if (fail_over_mac) {
4674 fail_over_mac_value = bond_parse_parm(fail_over_mac,
4676 if (fail_over_mac_value == -1) {
4677 pr_err("Error: invalid fail_over_mac \"%s\"\n",
4678 arp_validate == NULL ? "NULL" : arp_validate);
4682 if (bond_mode != BOND_MODE_ACTIVEBACKUP)
4683 pr_warning("Warning: fail_over_mac only affects active-backup mode.\n");
4685 fail_over_mac_value = BOND_FOM_NONE;
4688 /* fill params struct with the proper values */
4689 params->mode = bond_mode;
4690 params->xmit_policy = xmit_hashtype;
4691 params->miimon = miimon;
4692 params->num_peer_notif = num_peer_notif;
4693 params->arp_interval = arp_interval;
4694 params->arp_validate = arp_validate_value;
4695 params->arp_all_targets = arp_all_targets_value;
4696 params->updelay = updelay;
4697 params->downdelay = downdelay;
4698 params->use_carrier = use_carrier;
4699 params->lacp_fast = lacp_fast;
4700 params->primary[0] = 0;
4701 params->primary_reselect = primary_reselect_value;
4702 params->fail_over_mac = fail_over_mac_value;
4703 params->tx_queues = tx_queues;
4704 params->all_slaves_active = all_slaves_active;
4705 params->resend_igmp = resend_igmp;
4706 params->min_links = min_links;
4709 strncpy(params->primary, primary, IFNAMSIZ);
4710 params->primary[IFNAMSIZ - 1] = 0;
4713 memcpy(params->arp_targets, arp_target, sizeof(arp_target));
4718 static struct lock_class_key bonding_netdev_xmit_lock_key;
4719 static struct lock_class_key bonding_netdev_addr_lock_key;
4720 static struct lock_class_key bonding_tx_busylock_key;
4722 static void bond_set_lockdep_class_one(struct net_device *dev,
4723 struct netdev_queue *txq,
4726 lockdep_set_class(&txq->_xmit_lock,
4727 &bonding_netdev_xmit_lock_key);
4730 static void bond_set_lockdep_class(struct net_device *dev)
4732 lockdep_set_class(&dev->addr_list_lock,
4733 &bonding_netdev_addr_lock_key);
4734 netdev_for_each_tx_queue(dev, bond_set_lockdep_class_one, NULL);
4735 dev->qdisc_tx_busylock = &bonding_tx_busylock_key;
4739 * Called from registration process
4741 static int bond_init(struct net_device *bond_dev)
4743 struct bonding *bond = netdev_priv(bond_dev);
4744 struct bond_net *bn = net_generic(dev_net(bond_dev), bond_net_id);
4745 struct alb_bond_info *bond_info = &(BOND_ALB_INFO(bond));
4747 pr_debug("Begin bond_init for %s\n", bond_dev->name);
4750 * Initialize locks that may be required during
4751 * en/deslave operations. All of the bond_open work
4752 * (of which this is part) should really be moved to
4753 * a phase prior to dev_open
4755 spin_lock_init(&(bond_info->tx_hashtbl_lock));
4756 spin_lock_init(&(bond_info->rx_hashtbl_lock));
4758 bond->wq = create_singlethread_workqueue(bond_dev->name);
4762 bond_set_lockdep_class(bond_dev);
4764 list_add_tail(&bond->bond_list, &bn->dev_list);
4766 bond_prepare_sysfs_group(bond);
4768 bond_debug_register(bond);
4770 /* Ensure valid dev_addr */
4771 if (is_zero_ether_addr(bond_dev->dev_addr) &&
4772 bond_dev->addr_assign_type == NET_ADDR_PERM)
4773 eth_hw_addr_random(bond_dev);
4778 static int bond_validate(struct nlattr *tb[], struct nlattr *data[])
4780 if (tb[IFLA_ADDRESS]) {
4781 if (nla_len(tb[IFLA_ADDRESS]) != ETH_ALEN)
4783 if (!is_valid_ether_addr(nla_data(tb[IFLA_ADDRESS])))
4784 return -EADDRNOTAVAIL;
4789 static unsigned int bond_get_num_tx_queues(void)
4794 static struct rtnl_link_ops bond_link_ops __read_mostly = {
4796 .priv_size = sizeof(struct bonding),
4797 .setup = bond_setup,
4798 .validate = bond_validate,
4799 .get_num_tx_queues = bond_get_num_tx_queues,
4800 .get_num_rx_queues = bond_get_num_tx_queues, /* Use the same number
4804 /* Create a new bond based on the specified name and bonding parameters.
4805 * If name is NULL, obtain a suitable "bond%d" name for us.
4806 * Caller must NOT hold rtnl_lock; we need to release it here before we
4807 * set up our sysfs entries.
4809 int bond_create(struct net *net, const char *name)
4811 struct net_device *bond_dev;
4816 bond_dev = alloc_netdev_mq(sizeof(struct bonding),
4817 name ? name : "bond%d",
4818 bond_setup, tx_queues);
4820 pr_err("%s: eek! can't alloc netdev!\n", name);
4825 dev_net_set(bond_dev, net);
4826 bond_dev->rtnl_link_ops = &bond_link_ops;
4828 res = register_netdevice(bond_dev);
4830 netif_carrier_off(bond_dev);
4834 bond_destructor(bond_dev);
4838 static int __net_init bond_net_init(struct net *net)
4840 struct bond_net *bn = net_generic(net, bond_net_id);
4843 INIT_LIST_HEAD(&bn->dev_list);
4845 bond_create_proc_dir(bn);
4846 bond_create_sysfs(bn);
4851 static void __net_exit bond_net_exit(struct net *net)
4853 struct bond_net *bn = net_generic(net, bond_net_id);
4854 struct bonding *bond, *tmp_bond;
4857 bond_destroy_sysfs(bn);
4858 bond_destroy_proc_dir(bn);
4860 /* Kill off any bonds created after unregistering bond rtnl ops */
4862 list_for_each_entry_safe(bond, tmp_bond, &bn->dev_list, bond_list)
4863 unregister_netdevice_queue(bond->dev, &list);
4864 unregister_netdevice_many(&list);
4868 static struct pernet_operations bond_net_ops = {
4869 .init = bond_net_init,
4870 .exit = bond_net_exit,
4872 .size = sizeof(struct bond_net),
4875 static int __init bonding_init(void)
4880 pr_info("%s", bond_version);
4882 res = bond_check_params(&bonding_defaults);
4886 res = register_pernet_subsys(&bond_net_ops);
4890 res = rtnl_link_register(&bond_link_ops);
4894 bond_create_debugfs();
4896 for (i = 0; i < max_bonds; i++) {
4897 res = bond_create(&init_net, NULL);
4902 register_netdevice_notifier(&bond_netdev_notifier);
4906 rtnl_link_unregister(&bond_link_ops);
4908 unregister_pernet_subsys(&bond_net_ops);
4913 static void __exit bonding_exit(void)
4915 unregister_netdevice_notifier(&bond_netdev_notifier);
4917 bond_destroy_debugfs();
4919 rtnl_link_unregister(&bond_link_ops);
4920 unregister_pernet_subsys(&bond_net_ops);
4922 #ifdef CONFIG_NET_POLL_CONTROLLER
4924 * Make sure we don't have an imbalance on our netpoll blocking
4926 WARN_ON(atomic_read(&netpoll_block_tx));
4930 module_init(bonding_init);
4931 module_exit(bonding_exit);
4932 MODULE_LICENSE("GPL");
4933 MODULE_VERSION(DRV_VERSION);
4934 MODULE_DESCRIPTION(DRV_DESCRIPTION ", v" DRV_VERSION);
4935 MODULE_AUTHOR("Thomas Davis, tadavis@lbl.gov and many others");
4936 MODULE_ALIAS_RTNL_LINK("bond");