drivers/net/can/sja1000/sja1000.c

   1 /*
   2  * sja1000.c -  Philips SJA1000 network device driver
   3  *
   4  * Copyright (c) 2003 Matthias Brukner, Trajet Gmbh, Rebenring 33,
   5  * 38106 Braunschweig, GERMANY
   6  *
   7  * Copyright (c) 2002-2007 Volkswagen Group Electronic Research
   8  * All rights reserved.
   9  *
  10  * Redistribution and use in source and binary forms, with or without
  11  * modification, are permitted provided that the following conditions
  12  * are met:
  13  * 1. Redistributions of source code must retain the above copyright
  14  *    notice, this list of conditions and the following disclaimer.
  15  * 2. Redistributions in binary form must reproduce the above copyright
  16  *    notice, this list of conditions and the following disclaimer in the
  17  *    documentation and/or other materials provided with the distribution.
  18  * 3. Neither the name of Volkswagen nor the names of its contributors
  19  *    may be used to endorse or promote products derived from this software
  20  *    without specific prior written permission.
  21  *
  22  * Alternatively, provided that this notice is retained in full, this
  23  * software may be distributed under the terms of the GNU General
  24  * Public License ("GPL") version 2, in which case the provisions of the
  25  * GPL apply INSTEAD OF those given above.
  26  *
  27  * The provided data structures and external interfaces from this code
  28  * are not restricted to be used by modules with a GPL compatible license.
  29  *
  30  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  31  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  32  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
  33  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  34  * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
  35  * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
  36  * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
  37  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
  38  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  39  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
  40  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
  41  * DAMAGE.
  42  *
  43  * Send feedback to <socketcan-users@lists.berlios.de>
  44  *
  45  */
  46
  47 #include <linux/module.h>
  48 #include <linux/init.h>
  49 #include <linux/kernel.h>
  50 #include <linux/sched.h>
  51 #include <linux/types.h>
  52 #include <linux/fcntl.h>
  53 #include <linux/interrupt.h>
  54 #include <linux/ptrace.h>
  55 #include <linux/string.h>
  56 #include <linux/errno.h>
  57 #include <linux/netdevice.h>
  58 #include <linux/if_arp.h>
  59 #include <linux/if_ether.h>
  60 #include <linux/skbuff.h>
  61 #include <linux/delay.h>
  62
  63 #include <linux/can.h>
  64 #include <linux/can/dev.h>
  65 #include <linux/can/error.h>
  66
  67 #include "sja1000.h"
  68
  69 #define DRV_NAME "sja1000"
  70
  71 MODULE_AUTHOR("Oliver Hartkopp <oliver.hartkopp@volkswagen.de>");
  72 MODULE_LICENSE("Dual BSD/GPL");
  73 MODULE_DESCRIPTION(DRV_NAME "CAN netdevice driver");
  74
  75 static struct can_bittiming_const sja1000_bittiming_const = {
  76         .name = DRV_NAME,
  77         .tseg1_min = 1,
  78         .tseg1_max = 16,
  79         .tseg2_min = 1,
  80         .tseg2_max = 8,
  81         .sjw_max = 4,
  82         .brp_min = 1,
  83         .brp_max = 64,
  84         .brp_inc = 1,
  85 };
  86
  87 static int sja1000_probe_chip(struct net_device *dev)
  88 {
  89         struct sja1000_priv *priv = netdev_priv(dev);
  90
  91         if (priv->reg_base && (priv->read_reg(priv, 0) == 0xFF)) {
  92                 printk(KERN_INFO "%s: probing @0x%lX failed\n",
  93                        DRV_NAME, dev->base_addr);
  94                 return 0;
  95         }
  96         return -1;
  97 }
  98
  99 static void set_reset_mode(struct net_device *dev)
 100 {
 101         struct sja1000_priv *priv = netdev_priv(dev);
 102         unsigned char status = priv->read_reg(priv, REG_MOD);
 103         int i;
 104
 105         /* disable interrupts */
 106         priv->write_reg(priv, REG_IER, IRQ_OFF);
 107
 108         for (i = 0; i < 100; i++) {
 109                 /* check reset bit */
 110                 if (status & MOD_RM) {
 111                         priv->can.state = CAN_STATE_STOPPED;
 112                         return;
 113                 }
 114
 115                 priv->write_reg(priv, REG_MOD, MOD_RM); /* reset chip */
 116                 udelay(10);
 117                 status = priv->read_reg(priv, REG_MOD);
 118         }
 119
 120         dev_err(dev->dev.parent, "setting SJA1000 into reset mode failed!\n");
 121 }
 122
 123 static void set_normal_mode(struct net_device *dev)
 124 {
 125         struct sja1000_priv *priv = netdev_priv(dev);
 126         unsigned char status = priv->read_reg(priv, REG_MOD);
 127         int i;
 128
 129         for (i = 0; i < 100; i++) {
 130                 /* check reset bit */
 131                 if ((status & MOD_RM) == 0) {
 132                         priv->can.state = CAN_STATE_ERROR_ACTIVE;
 133                         /* enable all interrupts */
 134                         priv->write_reg(priv, REG_IER, IRQ_ALL);
 135                         return;
 136                 }
 137
 138                 /* set chip to normal mode */
 139                 priv->write_reg(priv, REG_MOD, 0x00);
 140                 udelay(10);
 141                 status = priv->read_reg(priv, REG_MOD);
 142         }
 143
 144         dev_err(dev->dev.parent, "setting SJA1000 into normal mode failed!\n");
 145 }
 146
 147 static void sja1000_start(struct net_device *dev)
 148 {
 149         struct sja1000_priv *priv = netdev_priv(dev);
 150
 151         /* leave reset mode */
 152         if (priv->can.state != CAN_STATE_STOPPED)
 153                 set_reset_mode(dev);
 154
 155         /* Clear error counters and error code capture */
 156         priv->write_reg(priv, REG_TXERR, 0x0);
 157         priv->write_reg(priv, REG_RXERR, 0x0);
 158         priv->read_reg(priv, REG_ECC);
 159
 160         /* leave reset mode */
 161         set_normal_mode(dev);
 162 }
 163
 164 static int sja1000_set_mode(struct net_device *dev, enum can_mode mode)
 165 {
 166         struct sja1000_priv *priv = netdev_priv(dev);
 167
 168         if (!priv->open_time)
 169                 return -EINVAL;
 170
 171         switch (mode) {
 172         case CAN_MODE_START:
 173                 sja1000_start(dev);
 174                 if (netif_queue_stopped(dev))
 175                         netif_wake_queue(dev);
 176                 break;
 177
 178         default:
 179                 return -EOPNOTSUPP;
 180         }
 181
 182         return 0;
 183 }
 184
 185 static int sja1000_set_bittiming(struct net_device *dev)
 186 {
 187         struct sja1000_priv *priv = netdev_priv(dev);
 188         struct can_bittiming *bt = &priv->can.bittiming;
 189         u8 btr0, btr1;
 190
 191         btr0 = ((bt->brp - 1) & 0x3f) | (((bt->sjw - 1) & 0x3) << 6);
 192         btr1 = ((bt->prop_seg + bt->phase_seg1 - 1) & 0xf) |
 193                 (((bt->phase_seg2 - 1) & 0x7) << 4);
 194         if (priv->can.ctrlmode & CAN_CTRLMODE_3_SAMPLES)
 195                 btr1 |= 0x80;
 196
 197         dev_info(dev->dev.parent,
 198                  "setting BTR0=0x%02x BTR1=0x%02x\n", btr0, btr1);
 199
 200         priv->write_reg(priv, REG_BTR0, btr0);
 201         priv->write_reg(priv, REG_BTR1, btr1);
 202
 203         return 0;
 204 }
 205
 206 /*
 207  * initialize SJA1000 chip:
 208  *   - reset chip
 209  *   - set output mode
 210  *   - set baudrate
 211  *   - enable interrupts
 212  *   - start operating mode
 213  */
 214 static void chipset_init(struct net_device *dev)
 215 {
 216         struct sja1000_priv *priv = netdev_priv(dev);
 217
 218         /* set clock divider and output control register */
 219         priv->write_reg(priv, REG_CDR, priv->cdr | CDR_PELICAN);
 220
 221         /* set acceptance filter (accept all) */
 222         priv->write_reg(priv, REG_ACCC0, 0x00);
 223         priv->write_reg(priv, REG_ACCC1, 0x00);
 224         priv->write_reg(priv, REG_ACCC2, 0x00);
 225         priv->write_reg(priv, REG_ACCC3, 0x00);
 226
 227         priv->write_reg(priv, REG_ACCM0, 0xFF);
 228         priv->write_reg(priv, REG_ACCM1, 0xFF);
 229         priv->write_reg(priv, REG_ACCM2, 0xFF);
 230         priv->write_reg(priv, REG_ACCM3, 0xFF);
 231
 232         priv->write_reg(priv, REG_OCR, priv->ocr | OCR_MODE_NORMAL);
 233 }
 234
 235 /*
 236  * transmit a CAN message
 237  * message layout in the sk_buff should be like this:
 238  * xx xx xx xx   ff      ll   00 11 22 33 44 55 66 77
 239  * [  can-id ] [flags] [len] [can data (up to 8 bytes]
 240  */
 241 static netdev_tx_t sja1000_start_xmit(struct sk_buff *skb,
 242                                             struct net_device *dev)
 243 {
 244         struct sja1000_priv *priv = netdev_priv(dev);
 245         struct net_device_stats *stats = &dev->stats;
 246         struct can_frame *cf = (struct can_frame *)skb->data;
 247         uint8_t fi;
 248         uint8_t dlc;
 249         canid_t id;
 250         uint8_t dreg;
 251         int i;
 252
 253         netif_stop_queue(dev);
 254
 255         fi = dlc = cf->can_dlc;
 256         id = cf->can_id;
 257
 258         if (id & CAN_RTR_FLAG)
 259                 fi |= FI_RTR;
 260
 261         if (id & CAN_EFF_FLAG) {
 262                 fi |= FI_FF;
 263                 dreg = EFF_BUF;
 264                 priv->write_reg(priv, REG_FI, fi);
 265                 priv->write_reg(priv, REG_ID1, (id & 0x1fe00000) >> (5 + 16));
 266                 priv->write_reg(priv, REG_ID2, (id & 0x001fe000) >> (5 + 8));
 267                 priv->write_reg(priv, REG_ID3, (id & 0x00001fe0) >> 5);
 268                 priv->write_reg(priv, REG_ID4, (id & 0x0000001f) << 3);
 269         } else {
 270                 dreg = SFF_BUF;
 271                 priv->write_reg(priv, REG_FI, fi);
 272                 priv->write_reg(priv, REG_ID1, (id & 0x000007f8) >> 3);
 273                 priv->write_reg(priv, REG_ID2, (id & 0x00000007) << 5);
 274         }
 275
 276         for (i = 0; i < dlc; i++)
 277                 priv->write_reg(priv, dreg++, cf->data[i]);
 278
 279         stats->tx_bytes += dlc;
 280         dev->trans_start = jiffies;
 281
 282         can_put_echo_skb(skb, dev, 0);
 283
 284         priv->write_reg(priv, REG_CMR, CMD_TR);
 285
 286         return NETDEV_TX_OK;
 287 }
 288
 289 static void sja1000_rx(struct net_device *dev)
 290 {
 291         struct sja1000_priv *priv = netdev_priv(dev);
 292         struct net_device_stats *stats = &dev->stats;
 293         struct can_frame *cf;
 294         struct sk_buff *skb;
 295         uint8_t fi;
 296         uint8_t dreg;
 297         canid_t id;
 298         uint8_t dlc;
 299         int i;
 300
 301         skb = dev_alloc_skb(sizeof(struct can_frame));
 302         if (skb == NULL)
 303                 return;
 304         skb->dev = dev;
 305         skb->protocol = htons(ETH_P_CAN);
 306
 307         fi = priv->read_reg(priv, REG_FI);
 308         dlc = fi & 0x0F;
 309
 310         if (fi & FI_FF) {
 311                 /* extended frame format (EFF) */
 312                 dreg = EFF_BUF;
 313                 id = (priv->read_reg(priv, REG_ID1) << (5 + 16))
 314                     | (priv->read_reg(priv, REG_ID2) << (5 + 8))
 315                     | (priv->read_reg(priv, REG_ID3) << 5)
 316                     | (priv->read_reg(priv, REG_ID4) >> 3);
 317                 id |= CAN_EFF_FLAG;
 318         } else {
 319                 /* standard frame format (SFF) */
 320                 dreg = SFF_BUF;
 321                 id = (priv->read_reg(priv, REG_ID1) << 3)
 322                     | (priv->read_reg(priv, REG_ID2) >> 5);
 323         }
 324
 325         if (fi & FI_RTR)
 326                 id |= CAN_RTR_FLAG;
 327
 328         cf = (struct can_frame *)skb_put(skb, sizeof(struct can_frame));
 329         memset(cf, 0, sizeof(struct can_frame));
 330         cf->can_id = id;
 331         cf->can_dlc = dlc;
 332         for (i = 0; i < dlc; i++)
 333                 cf->data[i] = priv->read_reg(priv, dreg++);
 334
 335         while (i < 8)
 336                 cf->data[i++] = 0;
 337
 338         /* release receive buffer */
 339         priv->write_reg(priv, REG_CMR, CMD_RRB);
 340
 341         netif_rx(skb);
 342
 343         stats->rx_packets++;
 344         stats->rx_bytes += dlc;
 345 }
 346
 347 static int sja1000_err(struct net_device *dev, uint8_t isrc, uint8_t status)
 348 {
 349         struct sja1000_priv *priv = netdev_priv(dev);
 350         struct net_device_stats *stats = &dev->stats;
 351         struct can_frame *cf;
 352         struct sk_buff *skb;
 353         enum can_state state = priv->can.state;
 354         uint8_t ecc, alc;
 355
 356         skb = dev_alloc_skb(sizeof(struct can_frame));
 357         if (skb == NULL)
 358                 return -ENOMEM;
 359         skb->dev = dev;
 360         skb->protocol = htons(ETH_P_CAN);
 361         cf = (struct can_frame *)skb_put(skb, sizeof(struct can_frame));
 362         memset(cf, 0, sizeof(struct can_frame));
 363         cf->can_id = CAN_ERR_FLAG;
 364         cf->can_dlc = CAN_ERR_DLC;
 365
 366         if (isrc & IRQ_DOI) {
 367                 /* data overrun interrupt */
 368                 dev_dbg(dev->dev.parent, "data overrun interrupt\n");
 369                 cf->can_id |= CAN_ERR_CRTL;
 370                 cf->data[1] = CAN_ERR_CRTL_RX_OVERFLOW;
 371                 stats->rx_over_errors++;
 372                 stats->rx_errors++;
 373                 priv->write_reg(priv, REG_CMR, CMD_CDO);        /* clear bit */
 374         }
 375
 376         if (isrc & IRQ_EI) {
 377                 /* error warning interrupt */
 378                 dev_dbg(dev->dev.parent, "error warning interrupt\n");
 379
 380                 if (status & SR_BS) {
 381                         state = CAN_STATE_BUS_OFF;
 382                         cf->can_id |= CAN_ERR_BUSOFF;
 383                         can_bus_off(dev);
 384                 } else if (status & SR_ES) {
 385                         state = CAN_STATE_ERROR_WARNING;
 386                 } else
 387                         state = CAN_STATE_ERROR_ACTIVE;
 388         }
 389         if (isrc & IRQ_BEI) {
 390                 /* bus error interrupt */
 391                 priv->can.can_stats.bus_error++;
 392                 stats->rx_errors++;
 393
 394                 ecc = priv->read_reg(priv, REG_ECC);
 395
 396                 cf->can_id |= CAN_ERR_PROT | CAN_ERR_BUSERROR;
 397
 398                 switch (ecc & ECC_MASK) {
 399                 case ECC_BIT:
 400                         cf->data[2] |= CAN_ERR_PROT_BIT;
 401                         break;
 402                 case ECC_FORM:
 403                         cf->data[2] |= CAN_ERR_PROT_FORM;
 404                         break;
 405                 case ECC_STUFF:
 406                         cf->data[2] |= CAN_ERR_PROT_STUFF;
 407                         break;
 408                 default:
 409                         cf->data[2] |= CAN_ERR_PROT_UNSPEC;
 410                         cf->data[3] = ecc & ECC_SEG;
 411                         break;
 412                 }
 413                 /* Error occured during transmission? */
 414                 if ((ecc & ECC_DIR) == 0)
 415                         cf->data[2] |= CAN_ERR_PROT_TX;
 416         }
 417         if (isrc & IRQ_EPI) {
 418                 /* error passive interrupt */
 419                 dev_dbg(dev->dev.parent, "error passive interrupt\n");
 420                 if (status & SR_ES)
 421                         state = CAN_STATE_ERROR_PASSIVE;
 422                 else
 423                         state = CAN_STATE_ERROR_ACTIVE;
 424         }
 425         if (isrc & IRQ_ALI) {
 426                 /* arbitration lost interrupt */
 427                 dev_dbg(dev->dev.parent, "arbitration lost interrupt\n");
 428                 alc = priv->read_reg(priv, REG_ALC);
 429                 priv->can.can_stats.arbitration_lost++;
 430                 stats->rx_errors++;
 431                 cf->can_id |= CAN_ERR_LOSTARB;
 432                 cf->data[0] = alc & 0x1f;
 433         }
 434
 435         if (state != priv->can.state && (state == CAN_STATE_ERROR_WARNING ||
 436                                          state == CAN_STATE_ERROR_PASSIVE)) {
 437                 uint8_t rxerr = priv->read_reg(priv, REG_RXERR);
 438                 uint8_t txerr = priv->read_reg(priv, REG_TXERR);
 439                 cf->can_id |= CAN_ERR_CRTL;
 440                 if (state == CAN_STATE_ERROR_WARNING) {
 441                         priv->can.can_stats.error_warning++;
 442                         cf->data[1] = (txerr > rxerr) ?
 443                                 CAN_ERR_CRTL_TX_WARNING :
 444                                 CAN_ERR_CRTL_RX_WARNING;
 445                 } else {
 446                         priv->can.can_stats.error_passive++;
 447                         cf->data[1] = (txerr > rxerr) ?
 448                                 CAN_ERR_CRTL_TX_PASSIVE :
 449                                 CAN_ERR_CRTL_RX_PASSIVE;
 450                 }
 451         }
 452
 453         priv->can.state = state;
 454
 455         netif_rx(skb);
 456
 457         stats->rx_packets++;
 458         stats->rx_bytes += cf->can_dlc;
 459
 460         return 0;
 461 }
 462
 463 irqreturn_t sja1000_interrupt(int irq, void *dev_id)
 464 {
 465         struct net_device *dev = (struct net_device *)dev_id;
 466         struct sja1000_priv *priv = netdev_priv(dev);
 467         struct net_device_stats *stats = &dev->stats;
 468         uint8_t isrc, status;
 469         int n = 0;
 470
 471         /* Shared interrupts and IRQ off? */
 472         if (priv->read_reg(priv, REG_IER) == IRQ_OFF)
 473                 return IRQ_NONE;
 474
 475         if (priv->pre_irq)
 476                 priv->pre_irq(priv);
 477
 478         while ((isrc = priv->read_reg(priv, REG_IR)) && (n < SJA1000_MAX_IRQ)) {
 479                 n++;
 480                 status = priv->read_reg(priv, REG_SR);
 481
 482                 if (isrc & IRQ_WUI)
 483                         dev_warn(dev->dev.parent, "wakeup interrupt\n");
 484
 485                 if (isrc & IRQ_TI) {
 486                         /* transmission complete interrupt */
 487                         stats->tx_packets++;
 488                         can_get_echo_skb(dev, 0);
 489                         netif_wake_queue(dev);
 490                 }
 491                 if (isrc & IRQ_RI) {
 492                         /* receive interrupt */
 493                         while (status & SR_RBS) {
 494                                 sja1000_rx(dev);
 495                                 status = priv->read_reg(priv, REG_SR);
 496                         }
 497                 }
 498                 if (isrc & (IRQ_DOI | IRQ_EI | IRQ_BEI | IRQ_EPI | IRQ_ALI)) {
 499                         /* error interrupt */
 500                         if (sja1000_err(dev, isrc, status))
 501                                 break;
 502                 }
 503         }
 504
 505         if (priv->post_irq)
 506                 priv->post_irq(priv);
 507
 508         if (n >= SJA1000_MAX_IRQ)
 509                 dev_dbg(dev->dev.parent, "%d messages handled in ISR", n);
 510
 511         return (n) ? IRQ_HANDLED : IRQ_NONE;
 512 }
 513 EXPORT_SYMBOL_GPL(sja1000_interrupt);
 514
 515 static int sja1000_open(struct net_device *dev)
 516 {
 517         struct sja1000_priv *priv = netdev_priv(dev);
 518         int err;
 519
 520         /* set chip into reset mode */
 521         set_reset_mode(dev);
 522
 523         /* common open */
 524         err = open_candev(dev);
 525         if (err)
 526                 return err;
 527
 528         /* register interrupt handler, if not done by the device driver */
 529         if (!(priv->flags & SJA1000_CUSTOM_IRQ_HANDLER)) {
 530                 err = request_irq(dev->irq, &sja1000_interrupt, priv->irq_flags,
 531                                   dev->name, (void *)dev);
 532                 if (err) {
 533                         close_candev(dev);
 534                         return -EAGAIN;
 535                 }
 536         }
 537
 538         /* init and start chi */
 539         sja1000_start(dev);
 540         priv->open_time = jiffies;
 541
 542         netif_start_queue(dev);
 543
 544         return 0;
 545 }
 546
 547 static int sja1000_close(struct net_device *dev)
 548 {
 549         struct sja1000_priv *priv = netdev_priv(dev);
 550
 551         netif_stop_queue(dev);
 552         set_reset_mode(dev);
 553
 554         if (!(priv->flags & SJA1000_CUSTOM_IRQ_HANDLER))
 555                 free_irq(dev->irq, (void *)dev);
 556
 557         close_candev(dev);
 558
 559         priv->open_time = 0;
 560
 561         return 0;
 562 }
 563
 564 struct net_device *alloc_sja1000dev(int sizeof_priv)
 565 {
 566         struct net_device *dev;
 567         struct sja1000_priv *priv;
 568
 569         dev = alloc_candev(sizeof(struct sja1000_priv) + sizeof_priv);
 570         if (!dev)
 571                 return NULL;
 572
 573         priv = netdev_priv(dev);
 574
 575         priv->dev = dev;
 576         priv->can.bittiming_const = &sja1000_bittiming_const;
 577         priv->can.do_set_bittiming = sja1000_set_bittiming;
 578         priv->can.do_set_mode = sja1000_set_mode;
 579
 580         if (sizeof_priv)
 581                 priv->priv = (void *)priv + sizeof(struct sja1000_priv);
 582
 583         return dev;
 584 }
 585 EXPORT_SYMBOL_GPL(alloc_sja1000dev);
 586
 587 void free_sja1000dev(struct net_device *dev)
 588 {
 589         free_candev(dev);
 590 }
 591 EXPORT_SYMBOL_GPL(free_sja1000dev);
 592
 593 static const struct net_device_ops sja1000_netdev_ops = {
 594        .ndo_open               = sja1000_open,
 595        .ndo_stop               = sja1000_close,
 596        .ndo_start_xmit         = sja1000_start_xmit,
 597 };
 598
 599 int register_sja1000dev(struct net_device *dev)
 600 {
 601         if (!sja1000_probe_chip(dev))
 602                 return -ENODEV;
 603
 604         dev->flags |= IFF_ECHO; /* we support local echo */
 605         dev->netdev_ops = &sja1000_netdev_ops;
 606
 607         set_reset_mode(dev);
 608         chipset_init(dev);
 609
 610         return register_candev(dev);
 611 }
 612 EXPORT_SYMBOL_GPL(register_sja1000dev);
 613
 614 void unregister_sja1000dev(struct net_device *dev)
 615 {
 616         set_reset_mode(dev);
 617         unregister_candev(dev);
 618 }
 619 EXPORT_SYMBOL_GPL(unregister_sja1000dev);
 620
 621 static __init int sja1000_init(void)
 622 {
 623         printk(KERN_INFO "%s CAN netdevice driver\n", DRV_NAME);
 624
 625         return 0;
 626 }
 627
 628 module_init(sja1000_init);
 629
 630 static __exit void sja1000_exit(void)
 631 {
 632         printk(KERN_INFO "%s: driver removed\n", DRV_NAME);
 633 }
 634
 635 module_exit(sja1000_exit);