2 # 8390 device configuration
6 bool "National Semi-conductor 8390 devices"
8 depends on NET_VENDOR_NATSEMI && (AMIGA_PCMCIA || PCI || SUPERH || \
9 ISA || MCA || EISA || MAC || M32R || MACH_TX49XX || \
10 MCA_LEGACY || H8300 || ARM || MIPS || ZORRO || PCMCIA || \
13 If you have a network (Ethernet) card belonging to this class, say Y
14 and read the Ethernet-HOWTO, available from
15 <http://www.tldp.org/docs.html#howto>.
17 Note that the answer to this question doesn't directly affect the
18 kernel: saying N will just cause the configurator to skip all
19 the questions about Western Digital cards. If you say Y, you will be
20 asked for your specific card in the following questions.
25 tristate "3c503 \"EtherLink II\" support"
29 If you have a network (Ethernet) card of this type, say Y and read
30 the Ethernet-HOWTO, available from
31 <http://www.tldp.org/docs.html#howto>.
33 To compile this driver as a module, choose M here. The module
37 tristate "Ansel Communications EISA 3200 support (EXPERIMENTAL)"
38 depends on PCI && (ISA || EISA) && EXPERIMENTAL
41 If you have a network (Ethernet) card of this type, say Y and read
42 the Ethernet-HOWTO, available from
43 <http://www.tldp.org/docs.html#howto>.
45 To compile this driver as a module, choose M here. The module
46 will be called ac3200.
49 tristate "Asix AX88190 PCMCIA support"
52 Say Y here if you intend to attach an Asix AX88190-based PCMCIA
53 (PC-card) Fast Ethernet card to your computer. These cards are
54 nearly NE2000 compatible but need a separate driver due to a few
57 To compile this driver as a module, choose M here: the module will be
58 called axnet_cs. If unsure, say N.
61 tristate "ASIX AX88796 NE2000 clone support"
62 depends on (ARM || MIPS || SUPERH)
67 AX88796 driver, using platform bus to provide
68 chip detection and resources
71 bool "ASIX AX88796 external 93CX6 eeprom support"
75 Select this if your platform comes with an external 93CX6 eeprom.
78 tristate "Cabletron E21xx support"
82 If you have a network (Ethernet) card of this type, say Y and read
83 the Ethernet-HOWTO, available from
84 <http://www.tldp.org/docs.html#howto>.
86 To compile this driver as a module, choose M here. The module
90 tristate "Racal-Interlan EISA ES3210 support (EXPERIMENTAL)"
91 depends on PCI && EISA && EXPERIMENTAL
94 If you have a network (Ethernet) card of this type, say Y and read
95 the Ethernet-HOWTO, available from
96 <http://www.tldp.org/docs.html#howto>.
98 To compile this driver as a module, choose M here. The module
99 will be called es3210.
102 tristate "HP PCLAN+ (27247B and 27252A) support"
106 If you have a network (Ethernet) card of this type, say Y and read
107 the Ethernet-HOWTO, available from
108 <http://www.tldp.org/docs.html#howto>.
110 To compile this driver as a module, choose M here. The module
111 will be called hp-plus.
114 tristate "HP PCLAN (27245 and other 27xxx series) support"
118 If you have a network (Ethernet) card of this type, say Y and read
119 the Ethernet-HOWTO, available from
120 <http://www.tldp.org/docs.html#howto>.
122 To compile this driver as a module, choose M here. The module
126 tristate "Hydra support"
130 If you have a Hydra Ethernet adapter, say Y. Otherwise, say N.
132 To compile this driver as a module, choose M here: the module
133 will be called hydra.
136 tristate "I-cubed EtherH/ANT EtherM support"
137 depends on ARM && ARCH_ACORN
140 If you have an Acorn system with one of these network cards, you
141 should say Y to this option if you wish to use it with Linux.
144 tristate "Mylex EISA LNE390A/B support (EXPERIMENTAL)"
145 depends on PCI && EISA && EXPERIMENTAL
148 If you have a network (Ethernet) card of this type, say Y and read
149 the Ethernet-HOWTO, available from
150 <http://www.tldp.org/docs.html#howto>.
152 To compile this driver as a module, choose M here. The module
153 will be called lne390.
156 bool "Macintosh NS 8390 based ethernet cards"
160 If you want to include a driver to support Nubus or LC-PDS
161 Ethernet cards using an NS8390 chipset or its equivalent, say Y
162 and read the Ethernet-HOWTO, available from
163 <http://www.tldp.org/docs.html#howto>.
166 tristate "NE2000/NE1000 support"
167 depends on (ISA || (Q40 && m) || M32R || MACH_TX49XX)
170 If you have a network (Ethernet) card of this type, say Y and read
171 the Ethernet-HOWTO, available from
172 <http://www.tldp.org/docs.html#howto>. Many Ethernet cards
173 without a specific driver are compatible with NE2000.
175 If you have a PCI NE2000 card however, say N here and Y to "PCI
176 NE2000 and clone support" under "EISA, VLB, PCI and on board
177 controllers" below. If you have a NE2000 card and are running on
178 an MCA system (a bus system used on some IBM PS/2 computers and
179 laptops), say N here and Y to "NE/2 (ne2000 MCA version) support",
182 To compile this driver as a module, choose M here. The module
186 tristate "PCI NE2000 and clones support (see help)"
190 This driver is for NE2000 compatible PCI cards. It will not work
191 with ISA NE2000 cards (they have their own driver, "NE2000/NE1000
192 support" below). If you have a PCI NE2000 network (Ethernet) card,
193 say Y and read the Ethernet-HOWTO, available from
194 <http://www.tldp.org/docs.html#howto>.
196 This driver also works for the following NE2000 clone cards:
197 RealTek RTL-8029 Winbond 89C940 Compex RL2000 KTI ET32P2
198 NetVin NV5000SC Via 86C926 SureCom NE34 Winbond
199 Holtek HT80232 Holtek HT80229
201 To compile this driver as a module, choose M here. The module
202 will be called ne2k-pci.
205 tristate "PCMCIA NE2000 support"
206 depends on AMIGA_PCMCIA
209 If you have a PCMCIA NE2000 compatible adapter, say Y. Otherwise,
212 To compile this driver as a module, choose M here: the module
216 tristate "Novell/Eagle/Microdyne NE3210 EISA support (EXPERIMENTAL)"
217 depends on PCI && EISA && EXPERIMENTAL
220 If you have a network (Ethernet) card of this type, say Y and read
221 the Ethernet-HOWTO, available from
222 <http://www.tldp.org/docs.html#howto>. Note that this driver
223 will NOT WORK for NE3200 cards as they are completely different.
225 To compile this driver as a module, choose M here. The module
226 will be called ne3210.
229 tristate "NE2000 compatible PCMCIA support"
233 Say Y here if you intend to attach an NE2000 compatible PCMCIA
234 (PC-card) Ethernet or Fast Ethernet card to your computer.
236 To compile this driver as a module, choose M here: the module will be
237 called pcnet_cs. If unsure, say N.
240 tristate "NE2000 compatible support for H8/300"
243 Say Y here if you want to use the NE2000 compatible
244 controller on the Renesas H8/300 processor.
247 tristate "National DP83902AV support"
251 Support for cards based on the National Semiconductor DP83902AV
252 ST-NIC Serial Network Interface Controller for Twisted Pair. This
253 is a 10Mbit/sec Ethernet controller. Product overview and specs at
254 <http://www.national.com/pf/DP/DP83902A.html>.
259 tristate "SMC Ultra support"
263 If you have a network (Ethernet) card of this type, say Y and read
264 the Ethernet-HOWTO, available from
265 <http://www.tldp.org/docs.html#howto>.
267 Important: There have been many reports that, with some motherboards
268 mixing an SMC Ultra and an Adaptec AHA154x SCSI card (or compatible,
269 such as some BusLogic models) causes corruption problems with many
270 operating systems. The Linux smc-ultra driver has a work-around for
271 this but keep it in mind if you have such a SCSI card and have
274 To compile this driver as a module, choose M here. The module
275 will be called smc-ultra.
278 tristate "SMC Ultra32 EISA support"
282 If you have a network (Ethernet) card of this type, say Y and read
283 the Ethernet-HOWTO, available from
284 <http://www.tldp.org/docs.html#howto>.
286 To compile this driver as a module, choose M here. The module
287 will be called smc-ultra32.
290 tristate "WD80*3 support"
294 If you have a network (Ethernet) card of this type, say Y and read
295 the Ethernet-HOWTO, available from
296 <http://www.tldp.org/docs.html#howto>.
298 To compile this driver as a module, choose M here. The module
302 tristate "Zorro NS8390-based Ethernet support"
306 This driver is for Zorro Ethernet cards using an NS8390-compatible
307 chipset, like the Village Tronic Ariadne II and the Individual
308 Computers X-Surf Ethernet cards. If you have such a card, say Y.
311 To compile this driver as a module, choose M here: the module
312 will be called zorro8390.
314 endif # NET_VENDOR_8390