1 /*******************************************************************************
3 Intel PRO/1000 Linux driver
4 Copyright(c) 1999 - 2006 Intel Corporation.
6 This program is free software; you can redistribute it and/or modify it
7 under the terms and conditions of the GNU General Public License,
8 version 2, as published by the Free Software Foundation.
10 This program is distributed in the hope it will be useful, but WITHOUT
11 ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
12 FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
15 You should have received a copy of the GNU General Public License along with
16 this program; if not, write to the Free Software Foundation, Inc.,
17 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
19 The full GNU General Public License is included in this distribution in
20 the file called "COPYING".
23 Linux NICS <linux.nics@intel.com>
24 e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
25 Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
27 *******************************************************************************/
30 #include <net/ip6_checksum.h>
32 #include <linux/prefetch.h>
33 #include <linux/bitops.h>
34 #include <linux/if_vlan.h>
36 char e1000_driver_name[] = "e1000";
37 static char e1000_driver_string[] = "Intel(R) PRO/1000 Network Driver";
38 #define DRV_VERSION "7.3.21-k8-NAPI"
39 const char e1000_driver_version[] = DRV_VERSION;
40 static const char e1000_copyright[] = "Copyright (c) 1999-2006 Intel Corporation.";
42 /* e1000_pci_tbl - PCI Device ID Table
44 * Last entry must be all 0s
47 * {PCI_DEVICE(PCI_VENDOR_ID_INTEL, device_id)}
49 static DEFINE_PCI_DEVICE_TABLE(e1000_pci_tbl) = {
50 INTEL_E1000_ETHERNET_DEVICE(0x1000),
51 INTEL_E1000_ETHERNET_DEVICE(0x1001),
52 INTEL_E1000_ETHERNET_DEVICE(0x1004),
53 INTEL_E1000_ETHERNET_DEVICE(0x1008),
54 INTEL_E1000_ETHERNET_DEVICE(0x1009),
55 INTEL_E1000_ETHERNET_DEVICE(0x100C),
56 INTEL_E1000_ETHERNET_DEVICE(0x100D),
57 INTEL_E1000_ETHERNET_DEVICE(0x100E),
58 INTEL_E1000_ETHERNET_DEVICE(0x100F),
59 INTEL_E1000_ETHERNET_DEVICE(0x1010),
60 INTEL_E1000_ETHERNET_DEVICE(0x1011),
61 INTEL_E1000_ETHERNET_DEVICE(0x1012),
62 INTEL_E1000_ETHERNET_DEVICE(0x1013),
63 INTEL_E1000_ETHERNET_DEVICE(0x1014),
64 INTEL_E1000_ETHERNET_DEVICE(0x1015),
65 INTEL_E1000_ETHERNET_DEVICE(0x1016),
66 INTEL_E1000_ETHERNET_DEVICE(0x1017),
67 INTEL_E1000_ETHERNET_DEVICE(0x1018),
68 INTEL_E1000_ETHERNET_DEVICE(0x1019),
69 INTEL_E1000_ETHERNET_DEVICE(0x101A),
70 INTEL_E1000_ETHERNET_DEVICE(0x101D),
71 INTEL_E1000_ETHERNET_DEVICE(0x101E),
72 INTEL_E1000_ETHERNET_DEVICE(0x1026),
73 INTEL_E1000_ETHERNET_DEVICE(0x1027),
74 INTEL_E1000_ETHERNET_DEVICE(0x1028),
75 INTEL_E1000_ETHERNET_DEVICE(0x1075),
76 INTEL_E1000_ETHERNET_DEVICE(0x1076),
77 INTEL_E1000_ETHERNET_DEVICE(0x1077),
78 INTEL_E1000_ETHERNET_DEVICE(0x1078),
79 INTEL_E1000_ETHERNET_DEVICE(0x1079),
80 INTEL_E1000_ETHERNET_DEVICE(0x107A),
81 INTEL_E1000_ETHERNET_DEVICE(0x107B),
82 INTEL_E1000_ETHERNET_DEVICE(0x107C),
83 INTEL_E1000_ETHERNET_DEVICE(0x108A),
84 INTEL_E1000_ETHERNET_DEVICE(0x1099),
85 INTEL_E1000_ETHERNET_DEVICE(0x10B5),
86 INTEL_E1000_ETHERNET_DEVICE(0x2E6E),
87 /* required last entry */
91 MODULE_DEVICE_TABLE(pci, e1000_pci_tbl);
93 int e1000_up(struct e1000_adapter *adapter);
94 void e1000_down(struct e1000_adapter *adapter);
95 void e1000_reinit_locked(struct e1000_adapter *adapter);
96 void e1000_reset(struct e1000_adapter *adapter);
97 int e1000_setup_all_tx_resources(struct e1000_adapter *adapter);
98 int e1000_setup_all_rx_resources(struct e1000_adapter *adapter);
99 void e1000_free_all_tx_resources(struct e1000_adapter *adapter);
100 void e1000_free_all_rx_resources(struct e1000_adapter *adapter);
101 static int e1000_setup_tx_resources(struct e1000_adapter *adapter,
102 struct e1000_tx_ring *txdr);
103 static int e1000_setup_rx_resources(struct e1000_adapter *adapter,
104 struct e1000_rx_ring *rxdr);
105 static void e1000_free_tx_resources(struct e1000_adapter *adapter,
106 struct e1000_tx_ring *tx_ring);
107 static void e1000_free_rx_resources(struct e1000_adapter *adapter,
108 struct e1000_rx_ring *rx_ring);
109 void e1000_update_stats(struct e1000_adapter *adapter);
111 static int e1000_init_module(void);
112 static void e1000_exit_module(void);
113 static int e1000_probe(struct pci_dev *pdev, const struct pci_device_id *ent);
114 static void __devexit e1000_remove(struct pci_dev *pdev);
115 static int e1000_alloc_queues(struct e1000_adapter *adapter);
116 static int e1000_sw_init(struct e1000_adapter *adapter);
117 static int e1000_open(struct net_device *netdev);
118 static int e1000_close(struct net_device *netdev);
119 static void e1000_configure_tx(struct e1000_adapter *adapter);
120 static void e1000_configure_rx(struct e1000_adapter *adapter);
121 static void e1000_setup_rctl(struct e1000_adapter *adapter);
122 static void e1000_clean_all_tx_rings(struct e1000_adapter *adapter);
123 static void e1000_clean_all_rx_rings(struct e1000_adapter *adapter);
124 static void e1000_clean_tx_ring(struct e1000_adapter *adapter,
125 struct e1000_tx_ring *tx_ring);
126 static void e1000_clean_rx_ring(struct e1000_adapter *adapter,
127 struct e1000_rx_ring *rx_ring);
128 static void e1000_set_rx_mode(struct net_device *netdev);
129 static void e1000_update_phy_info_task(struct work_struct *work);
130 static void e1000_watchdog(struct work_struct *work);
131 static void e1000_82547_tx_fifo_stall_task(struct work_struct *work);
132 static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb,
133 struct net_device *netdev);
134 static struct net_device_stats * e1000_get_stats(struct net_device *netdev);
135 static int e1000_change_mtu(struct net_device *netdev, int new_mtu);
136 static int e1000_set_mac(struct net_device *netdev, void *p);
137 static irqreturn_t e1000_intr(int irq, void *data);
138 static bool e1000_clean_tx_irq(struct e1000_adapter *adapter,
139 struct e1000_tx_ring *tx_ring);
140 static int e1000_clean(struct napi_struct *napi, int budget);
141 static bool e1000_clean_rx_irq(struct e1000_adapter *adapter,
142 struct e1000_rx_ring *rx_ring,
143 int *work_done, int work_to_do);
144 static bool e1000_clean_jumbo_rx_irq(struct e1000_adapter *adapter,
145 struct e1000_rx_ring *rx_ring,
146 int *work_done, int work_to_do);
147 static void e1000_alloc_rx_buffers(struct e1000_adapter *adapter,
148 struct e1000_rx_ring *rx_ring,
150 static void e1000_alloc_jumbo_rx_buffers(struct e1000_adapter *adapter,
151 struct e1000_rx_ring *rx_ring,
153 static int e1000_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd);
154 static int e1000_mii_ioctl(struct net_device *netdev, struct ifreq *ifr,
156 static void e1000_enter_82542_rst(struct e1000_adapter *adapter);
157 static void e1000_leave_82542_rst(struct e1000_adapter *adapter);
158 static void e1000_tx_timeout(struct net_device *dev);
159 static void e1000_reset_task(struct work_struct *work);
160 static void e1000_smartspeed(struct e1000_adapter *adapter);
161 static int e1000_82547_fifo_workaround(struct e1000_adapter *adapter,
162 struct sk_buff *skb);
164 static bool e1000_vlan_used(struct e1000_adapter *adapter);
165 static void e1000_vlan_mode(struct net_device *netdev,
166 netdev_features_t features);
167 static void e1000_vlan_filter_on_off(struct e1000_adapter *adapter,
169 static int e1000_vlan_rx_add_vid(struct net_device *netdev, u16 vid);
170 static int e1000_vlan_rx_kill_vid(struct net_device *netdev, u16 vid);
171 static void e1000_restore_vlan(struct e1000_adapter *adapter);
174 static int e1000_suspend(struct pci_dev *pdev, pm_message_t state);
175 static int e1000_resume(struct pci_dev *pdev);
177 static void e1000_shutdown(struct pci_dev *pdev);
179 #ifdef CONFIG_NET_POLL_CONTROLLER
180 /* for netdump / net console */
181 static void e1000_netpoll (struct net_device *netdev);
184 #define COPYBREAK_DEFAULT 256
185 static unsigned int copybreak __read_mostly = COPYBREAK_DEFAULT;
186 module_param(copybreak, uint, 0644);
187 MODULE_PARM_DESC(copybreak,
188 "Maximum size of packet that is copied to a new buffer on receive");
190 static pci_ers_result_t e1000_io_error_detected(struct pci_dev *pdev,
191 pci_channel_state_t state);
192 static pci_ers_result_t e1000_io_slot_reset(struct pci_dev *pdev);
193 static void e1000_io_resume(struct pci_dev *pdev);
195 static struct pci_error_handlers e1000_err_handler = {
196 .error_detected = e1000_io_error_detected,
197 .slot_reset = e1000_io_slot_reset,
198 .resume = e1000_io_resume,
201 static struct pci_driver e1000_driver = {
202 .name = e1000_driver_name,
203 .id_table = e1000_pci_tbl,
204 .probe = e1000_probe,
205 .remove = __devexit_p(e1000_remove),
207 /* Power Management Hooks */
208 .suspend = e1000_suspend,
209 .resume = e1000_resume,
211 .shutdown = e1000_shutdown,
212 .err_handler = &e1000_err_handler
215 MODULE_AUTHOR("Intel Corporation, <linux.nics@intel.com>");
216 MODULE_DESCRIPTION("Intel(R) PRO/1000 Network Driver");
217 MODULE_LICENSE("GPL");
218 MODULE_VERSION(DRV_VERSION);
220 #define DEFAULT_MSG_ENABLE (NETIF_MSG_DRV|NETIF_MSG_PROBE|NETIF_MSG_LINK)
221 static int debug = -1;
222 module_param(debug, int, 0);
223 MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)");
226 * e1000_get_hw_dev - return device
227 * used by hardware layer to print debugging information
230 struct net_device *e1000_get_hw_dev(struct e1000_hw *hw)
232 struct e1000_adapter *adapter = hw->back;
233 return adapter->netdev;
237 * e1000_init_module - Driver Registration Routine
239 * e1000_init_module is the first routine called when the driver is
240 * loaded. All it does is register with the PCI subsystem.
243 static int __init e1000_init_module(void)
246 pr_info("%s - version %s\n", e1000_driver_string, e1000_driver_version);
248 pr_info("%s\n", e1000_copyright);
250 ret = pci_register_driver(&e1000_driver);
251 if (copybreak != COPYBREAK_DEFAULT) {
253 pr_info("copybreak disabled\n");
255 pr_info("copybreak enabled for "
256 "packets <= %u bytes\n", copybreak);
261 module_init(e1000_init_module);
264 * e1000_exit_module - Driver Exit Cleanup Routine
266 * e1000_exit_module is called just before the driver is removed
270 static void __exit e1000_exit_module(void)
272 pci_unregister_driver(&e1000_driver);
275 module_exit(e1000_exit_module);
277 static int e1000_request_irq(struct e1000_adapter *adapter)
279 struct net_device *netdev = adapter->netdev;
280 irq_handler_t handler = e1000_intr;
281 int irq_flags = IRQF_SHARED;
284 err = request_irq(adapter->pdev->irq, handler, irq_flags, netdev->name,
287 e_err(probe, "Unable to allocate interrupt Error: %d\n", err);
293 static void e1000_free_irq(struct e1000_adapter *adapter)
295 struct net_device *netdev = adapter->netdev;
297 free_irq(adapter->pdev->irq, netdev);
301 * e1000_irq_disable - Mask off interrupt generation on the NIC
302 * @adapter: board private structure
305 static void e1000_irq_disable(struct e1000_adapter *adapter)
307 struct e1000_hw *hw = &adapter->hw;
311 synchronize_irq(adapter->pdev->irq);
315 * e1000_irq_enable - Enable default interrupt generation settings
316 * @adapter: board private structure
319 static void e1000_irq_enable(struct e1000_adapter *adapter)
321 struct e1000_hw *hw = &adapter->hw;
323 ew32(IMS, IMS_ENABLE_MASK);
327 static void e1000_update_mng_vlan(struct e1000_adapter *adapter)
329 struct e1000_hw *hw = &adapter->hw;
330 struct net_device *netdev = adapter->netdev;
331 u16 vid = hw->mng_cookie.vlan_id;
332 u16 old_vid = adapter->mng_vlan_id;
334 if (!e1000_vlan_used(adapter))
337 if (!test_bit(vid, adapter->active_vlans)) {
338 if (hw->mng_cookie.status &
339 E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT) {
340 e1000_vlan_rx_add_vid(netdev, vid);
341 adapter->mng_vlan_id = vid;
343 adapter->mng_vlan_id = E1000_MNG_VLAN_NONE;
345 if ((old_vid != (u16)E1000_MNG_VLAN_NONE) &&
347 !test_bit(old_vid, adapter->active_vlans))
348 e1000_vlan_rx_kill_vid(netdev, old_vid);
350 adapter->mng_vlan_id = vid;
354 static void e1000_init_manageability(struct e1000_adapter *adapter)
356 struct e1000_hw *hw = &adapter->hw;
358 if (adapter->en_mng_pt) {
359 u32 manc = er32(MANC);
361 /* disable hardware interception of ARP */
362 manc &= ~(E1000_MANC_ARP_EN);
368 static void e1000_release_manageability(struct e1000_adapter *adapter)
370 struct e1000_hw *hw = &adapter->hw;
372 if (adapter->en_mng_pt) {
373 u32 manc = er32(MANC);
375 /* re-enable hardware interception of ARP */
376 manc |= E1000_MANC_ARP_EN;
383 * e1000_configure - configure the hardware for RX and TX
384 * @adapter = private board structure
386 static void e1000_configure(struct e1000_adapter *adapter)
388 struct net_device *netdev = adapter->netdev;
391 e1000_set_rx_mode(netdev);
393 e1000_restore_vlan(adapter);
394 e1000_init_manageability(adapter);
396 e1000_configure_tx(adapter);
397 e1000_setup_rctl(adapter);
398 e1000_configure_rx(adapter);
399 /* call E1000_DESC_UNUSED which always leaves
400 * at least 1 descriptor unused to make sure
401 * next_to_use != next_to_clean */
402 for (i = 0; i < adapter->num_rx_queues; i++) {
403 struct e1000_rx_ring *ring = &adapter->rx_ring[i];
404 adapter->alloc_rx_buf(adapter, ring,
405 E1000_DESC_UNUSED(ring));
409 int e1000_up(struct e1000_adapter *adapter)
411 struct e1000_hw *hw = &adapter->hw;
413 /* hardware has been reset, we need to reload some things */
414 e1000_configure(adapter);
416 clear_bit(__E1000_DOWN, &adapter->flags);
418 napi_enable(&adapter->napi);
420 e1000_irq_enable(adapter);
422 netif_wake_queue(adapter->netdev);
424 /* fire a link change interrupt to start the watchdog */
425 ew32(ICS, E1000_ICS_LSC);
430 * e1000_power_up_phy - restore link in case the phy was powered down
431 * @adapter: address of board private structure
433 * The phy may be powered down to save power and turn off link when the
434 * driver is unloaded and wake on lan is not enabled (among others)
435 * *** this routine MUST be followed by a call to e1000_reset ***
439 void e1000_power_up_phy(struct e1000_adapter *adapter)
441 struct e1000_hw *hw = &adapter->hw;
444 /* Just clear the power down bit to wake the phy back up */
445 if (hw->media_type == e1000_media_type_copper) {
446 /* according to the manual, the phy will retain its
447 * settings across a power-down/up cycle */
448 e1000_read_phy_reg(hw, PHY_CTRL, &mii_reg);
449 mii_reg &= ~MII_CR_POWER_DOWN;
450 e1000_write_phy_reg(hw, PHY_CTRL, mii_reg);
454 static void e1000_power_down_phy(struct e1000_adapter *adapter)
456 struct e1000_hw *hw = &adapter->hw;
458 /* Power down the PHY so no link is implied when interface is down *
459 * The PHY cannot be powered down if any of the following is true *
462 * (c) SoL/IDER session is active */
463 if (!adapter->wol && hw->mac_type >= e1000_82540 &&
464 hw->media_type == e1000_media_type_copper) {
467 switch (hw->mac_type) {
470 case e1000_82545_rev_3:
473 case e1000_82546_rev_3:
475 case e1000_82541_rev_2:
477 case e1000_82547_rev_2:
478 if (er32(MANC) & E1000_MANC_SMBUS_EN)
484 e1000_read_phy_reg(hw, PHY_CTRL, &mii_reg);
485 mii_reg |= MII_CR_POWER_DOWN;
486 e1000_write_phy_reg(hw, PHY_CTRL, mii_reg);
493 static void e1000_down_and_stop(struct e1000_adapter *adapter)
495 set_bit(__E1000_DOWN, &adapter->flags);
496 cancel_work_sync(&adapter->reset_task);
497 cancel_delayed_work_sync(&adapter->watchdog_task);
498 cancel_delayed_work_sync(&adapter->phy_info_task);
499 cancel_delayed_work_sync(&adapter->fifo_stall_task);
502 void e1000_down(struct e1000_adapter *adapter)
504 struct e1000_hw *hw = &adapter->hw;
505 struct net_device *netdev = adapter->netdev;
509 /* disable receives in the hardware */
511 ew32(RCTL, rctl & ~E1000_RCTL_EN);
512 /* flush and sleep below */
514 netif_tx_disable(netdev);
516 /* disable transmits in the hardware */
518 tctl &= ~E1000_TCTL_EN;
520 /* flush both disables and wait for them to finish */
524 napi_disable(&adapter->napi);
526 e1000_irq_disable(adapter);
529 * Setting DOWN must be after irq_disable to prevent
530 * a screaming interrupt. Setting DOWN also prevents
531 * tasks from rescheduling.
533 e1000_down_and_stop(adapter);
535 adapter->link_speed = 0;
536 adapter->link_duplex = 0;
537 netif_carrier_off(netdev);
539 e1000_reset(adapter);
540 e1000_clean_all_tx_rings(adapter);
541 e1000_clean_all_rx_rings(adapter);
544 static void e1000_reinit_safe(struct e1000_adapter *adapter)
546 while (test_and_set_bit(__E1000_RESETTING, &adapter->flags))
548 mutex_lock(&adapter->mutex);
551 mutex_unlock(&adapter->mutex);
552 clear_bit(__E1000_RESETTING, &adapter->flags);
555 void e1000_reinit_locked(struct e1000_adapter *adapter)
557 /* if rtnl_lock is not held the call path is bogus */
559 WARN_ON(in_interrupt());
560 while (test_and_set_bit(__E1000_RESETTING, &adapter->flags))
564 clear_bit(__E1000_RESETTING, &adapter->flags);
567 void e1000_reset(struct e1000_adapter *adapter)
569 struct e1000_hw *hw = &adapter->hw;
570 u32 pba = 0, tx_space, min_tx_space, min_rx_space;
571 bool legacy_pba_adjust = false;
574 /* Repartition Pba for greater than 9k mtu
575 * To take effect CTRL.RST is required.
578 switch (hw->mac_type) {
579 case e1000_82542_rev2_0:
580 case e1000_82542_rev2_1:
585 case e1000_82541_rev_2:
586 legacy_pba_adjust = true;
590 case e1000_82545_rev_3:
593 case e1000_82546_rev_3:
597 case e1000_82547_rev_2:
598 legacy_pba_adjust = true;
601 case e1000_undefined:
606 if (legacy_pba_adjust) {
607 if (hw->max_frame_size > E1000_RXBUFFER_8192)
608 pba -= 8; /* allocate more FIFO for Tx */
610 if (hw->mac_type == e1000_82547) {
611 adapter->tx_fifo_head = 0;
612 adapter->tx_head_addr = pba << E1000_TX_HEAD_ADDR_SHIFT;
613 adapter->tx_fifo_size =
614 (E1000_PBA_40K - pba) << E1000_PBA_BYTES_SHIFT;
615 atomic_set(&adapter->tx_fifo_stall, 0);
617 } else if (hw->max_frame_size > ETH_FRAME_LEN + ETH_FCS_LEN) {
618 /* adjust PBA for jumbo frames */
621 /* To maintain wire speed transmits, the Tx FIFO should be
622 * large enough to accommodate two full transmit packets,
623 * rounded up to the next 1KB and expressed in KB. Likewise,
624 * the Rx FIFO should be large enough to accommodate at least
625 * one full receive packet and is similarly rounded up and
626 * expressed in KB. */
628 /* upper 16 bits has Tx packet buffer allocation size in KB */
629 tx_space = pba >> 16;
630 /* lower 16 bits has Rx packet buffer allocation size in KB */
633 * the tx fifo also stores 16 bytes of information about the tx
634 * but don't include ethernet FCS because hardware appends it
636 min_tx_space = (hw->max_frame_size +
637 sizeof(struct e1000_tx_desc) -
639 min_tx_space = ALIGN(min_tx_space, 1024);
641 /* software strips receive CRC, so leave room for it */
642 min_rx_space = hw->max_frame_size;
643 min_rx_space = ALIGN(min_rx_space, 1024);
646 /* If current Tx allocation is less than the min Tx FIFO size,
647 * and the min Tx FIFO size is less than the current Rx FIFO
648 * allocation, take space away from current Rx allocation */
649 if (tx_space < min_tx_space &&
650 ((min_tx_space - tx_space) < pba)) {
651 pba = pba - (min_tx_space - tx_space);
653 /* PCI/PCIx hardware has PBA alignment constraints */
654 switch (hw->mac_type) {
655 case e1000_82545 ... e1000_82546_rev_3:
656 pba &= ~(E1000_PBA_8K - 1);
662 /* if short on rx space, rx wins and must trump tx
663 * adjustment or use Early Receive if available */
664 if (pba < min_rx_space)
672 * flow control settings:
673 * The high water mark must be low enough to fit one full frame
674 * (or the size used for early receive) above it in the Rx FIFO.
675 * Set it to the lower of:
676 * - 90% of the Rx FIFO size, and
677 * - the full Rx FIFO size minus the early receive size (for parts
678 * with ERT support assuming ERT set to E1000_ERT_2048), or
679 * - the full Rx FIFO size minus one full frame
681 hwm = min(((pba << 10) * 9 / 10),
682 ((pba << 10) - hw->max_frame_size));
684 hw->fc_high_water = hwm & 0xFFF8; /* 8-byte granularity */
685 hw->fc_low_water = hw->fc_high_water - 8;
686 hw->fc_pause_time = E1000_FC_PAUSE_TIME;
688 hw->fc = hw->original_fc;
690 /* Allow time for pending master requests to run */
692 if (hw->mac_type >= e1000_82544)
695 if (e1000_init_hw(hw))
696 e_dev_err("Hardware Error\n");
697 e1000_update_mng_vlan(adapter);
699 /* if (adapter->hwflags & HWFLAGS_PHY_PWR_BIT) { */
700 if (hw->mac_type >= e1000_82544 &&
702 hw->autoneg_advertised == ADVERTISE_1000_FULL) {
703 u32 ctrl = er32(CTRL);
704 /* clear phy power management bit if we are in gig only mode,
705 * which if enabled will attempt negotiation to 100Mb, which
706 * can cause a loss of link at power off or driver unload */
707 ctrl &= ~E1000_CTRL_SWDPIN3;
711 /* Enable h/w to recognize an 802.1Q VLAN Ethernet packet */
712 ew32(VET, ETHERNET_IEEE_VLAN_TYPE);
714 e1000_reset_adaptive(hw);
715 e1000_phy_get_info(hw, &adapter->phy_info);
717 e1000_release_manageability(adapter);
721 * Dump the eeprom for users having checksum issues
723 static void e1000_dump_eeprom(struct e1000_adapter *adapter)
725 struct net_device *netdev = adapter->netdev;
726 struct ethtool_eeprom eeprom;
727 const struct ethtool_ops *ops = netdev->ethtool_ops;
730 u16 csum_old, csum_new = 0;
732 eeprom.len = ops->get_eeprom_len(netdev);
735 data = kmalloc(eeprom.len, GFP_KERNEL);
739 ops->get_eeprom(netdev, &eeprom, data);
741 csum_old = (data[EEPROM_CHECKSUM_REG * 2]) +
742 (data[EEPROM_CHECKSUM_REG * 2 + 1] << 8);
743 for (i = 0; i < EEPROM_CHECKSUM_REG * 2; i += 2)
744 csum_new += data[i] + (data[i + 1] << 8);
745 csum_new = EEPROM_SUM - csum_new;
747 pr_err("/*********************/\n");
748 pr_err("Current EEPROM Checksum : 0x%04x\n", csum_old);
749 pr_err("Calculated : 0x%04x\n", csum_new);
751 pr_err("Offset Values\n");
752 pr_err("======== ======\n");
753 print_hex_dump(KERN_ERR, "", DUMP_PREFIX_OFFSET, 16, 1, data, 128, 0);
755 pr_err("Include this output when contacting your support provider.\n");
756 pr_err("This is not a software error! Something bad happened to\n");
757 pr_err("your hardware or EEPROM image. Ignoring this problem could\n");
758 pr_err("result in further problems, possibly loss of data,\n");
759 pr_err("corruption or system hangs!\n");
760 pr_err("The MAC Address will be reset to 00:00:00:00:00:00,\n");
761 pr_err("which is invalid and requires you to set the proper MAC\n");
762 pr_err("address manually before continuing to enable this network\n");
763 pr_err("device. Please inspect the EEPROM dump and report the\n");
764 pr_err("issue to your hardware vendor or Intel Customer Support.\n");
765 pr_err("/*********************/\n");
771 * e1000_is_need_ioport - determine if an adapter needs ioport resources or not
772 * @pdev: PCI device information struct
774 * Return true if an adapter needs ioport resources
776 static int e1000_is_need_ioport(struct pci_dev *pdev)
778 switch (pdev->device) {
779 case E1000_DEV_ID_82540EM:
780 case E1000_DEV_ID_82540EM_LOM:
781 case E1000_DEV_ID_82540EP:
782 case E1000_DEV_ID_82540EP_LOM:
783 case E1000_DEV_ID_82540EP_LP:
784 case E1000_DEV_ID_82541EI:
785 case E1000_DEV_ID_82541EI_MOBILE:
786 case E1000_DEV_ID_82541ER:
787 case E1000_DEV_ID_82541ER_LOM:
788 case E1000_DEV_ID_82541GI:
789 case E1000_DEV_ID_82541GI_LF:
790 case E1000_DEV_ID_82541GI_MOBILE:
791 case E1000_DEV_ID_82544EI_COPPER:
792 case E1000_DEV_ID_82544EI_FIBER:
793 case E1000_DEV_ID_82544GC_COPPER:
794 case E1000_DEV_ID_82544GC_LOM:
795 case E1000_DEV_ID_82545EM_COPPER:
796 case E1000_DEV_ID_82545EM_FIBER:
797 case E1000_DEV_ID_82546EB_COPPER:
798 case E1000_DEV_ID_82546EB_FIBER:
799 case E1000_DEV_ID_82546EB_QUAD_COPPER:
806 static netdev_features_t e1000_fix_features(struct net_device *netdev,
807 netdev_features_t features)
810 * Since there is no support for separate rx/tx vlan accel
811 * enable/disable make sure tx flag is always in same state as rx.
813 if (features & NETIF_F_HW_VLAN_RX)
814 features |= NETIF_F_HW_VLAN_TX;
816 features &= ~NETIF_F_HW_VLAN_TX;
821 static int e1000_set_features(struct net_device *netdev,
822 netdev_features_t features)
824 struct e1000_adapter *adapter = netdev_priv(netdev);
825 netdev_features_t changed = features ^ netdev->features;
827 if (changed & NETIF_F_HW_VLAN_RX)
828 e1000_vlan_mode(netdev, features);
830 if (!(changed & (NETIF_F_RXCSUM | NETIF_F_RXALL)))
833 netdev->features = features;
834 adapter->rx_csum = !!(features & NETIF_F_RXCSUM);
836 if (netif_running(netdev))
837 e1000_reinit_locked(adapter);
839 e1000_reset(adapter);
844 static const struct net_device_ops e1000_netdev_ops = {
845 .ndo_open = e1000_open,
846 .ndo_stop = e1000_close,
847 .ndo_start_xmit = e1000_xmit_frame,
848 .ndo_get_stats = e1000_get_stats,
849 .ndo_set_rx_mode = e1000_set_rx_mode,
850 .ndo_set_mac_address = e1000_set_mac,
851 .ndo_tx_timeout = e1000_tx_timeout,
852 .ndo_change_mtu = e1000_change_mtu,
853 .ndo_do_ioctl = e1000_ioctl,
854 .ndo_validate_addr = eth_validate_addr,
855 .ndo_vlan_rx_add_vid = e1000_vlan_rx_add_vid,
856 .ndo_vlan_rx_kill_vid = e1000_vlan_rx_kill_vid,
857 #ifdef CONFIG_NET_POLL_CONTROLLER
858 .ndo_poll_controller = e1000_netpoll,
860 .ndo_fix_features = e1000_fix_features,
861 .ndo_set_features = e1000_set_features,
865 * e1000_init_hw_struct - initialize members of hw struct
866 * @adapter: board private struct
867 * @hw: structure used by e1000_hw.c
869 * Factors out initialization of the e1000_hw struct to its own function
870 * that can be called very early at init (just after struct allocation).
871 * Fields are initialized based on PCI device information and
872 * OS network device settings (MTU size).
873 * Returns negative error codes if MAC type setup fails.
875 static int e1000_init_hw_struct(struct e1000_adapter *adapter,
878 struct pci_dev *pdev = adapter->pdev;
880 /* PCI config space info */
881 hw->vendor_id = pdev->vendor;
882 hw->device_id = pdev->device;
883 hw->subsystem_vendor_id = pdev->subsystem_vendor;
884 hw->subsystem_id = pdev->subsystem_device;
885 hw->revision_id = pdev->revision;
887 pci_read_config_word(pdev, PCI_COMMAND, &hw->pci_cmd_word);
889 hw->max_frame_size = adapter->netdev->mtu +
890 ENET_HEADER_SIZE + ETHERNET_FCS_SIZE;
891 hw->min_frame_size = MINIMUM_ETHERNET_FRAME_SIZE;
893 /* identify the MAC */
894 if (e1000_set_mac_type(hw)) {
895 e_err(probe, "Unknown MAC Type\n");
899 switch (hw->mac_type) {
904 case e1000_82541_rev_2:
905 case e1000_82547_rev_2:
906 hw->phy_init_script = 1;
910 e1000_set_media_type(hw);
911 e1000_get_bus_info(hw);
913 hw->wait_autoneg_complete = false;
914 hw->tbi_compatibility_en = true;
915 hw->adaptive_ifs = true;
919 if (hw->media_type == e1000_media_type_copper) {
920 hw->mdix = AUTO_ALL_MODES;
921 hw->disable_polarity_correction = false;
922 hw->master_slave = E1000_MASTER_SLAVE;
929 * e1000_probe - Device Initialization Routine
930 * @pdev: PCI device information struct
931 * @ent: entry in e1000_pci_tbl
933 * Returns 0 on success, negative on failure
935 * e1000_probe initializes an adapter identified by a pci_dev structure.
936 * The OS initialization, configuring of the adapter private structure,
937 * and a hardware reset occur.
939 static int __devinit e1000_probe(struct pci_dev *pdev,
940 const struct pci_device_id *ent)
942 struct net_device *netdev;
943 struct e1000_adapter *adapter;
946 static int cards_found = 0;
947 static int global_quad_port_a = 0; /* global ksp3 port a indication */
948 int i, err, pci_using_dac;
951 u16 eeprom_apme_mask = E1000_EEPROM_APME;
952 int bars, need_ioport;
954 /* do not allocate ioport bars when not needed */
955 need_ioport = e1000_is_need_ioport(pdev);
957 bars = pci_select_bars(pdev, IORESOURCE_MEM | IORESOURCE_IO);
958 err = pci_enable_device(pdev);
960 bars = pci_select_bars(pdev, IORESOURCE_MEM);
961 err = pci_enable_device_mem(pdev);
966 err = pci_request_selected_regions(pdev, bars, e1000_driver_name);
970 pci_set_master(pdev);
971 err = pci_save_state(pdev);
973 goto err_alloc_etherdev;
976 netdev = alloc_etherdev(sizeof(struct e1000_adapter));
978 goto err_alloc_etherdev;
980 SET_NETDEV_DEV(netdev, &pdev->dev);
982 pci_set_drvdata(pdev, netdev);
983 adapter = netdev_priv(netdev);
984 adapter->netdev = netdev;
985 adapter->pdev = pdev;
986 adapter->msg_enable = netif_msg_init(debug, DEFAULT_MSG_ENABLE);
987 adapter->bars = bars;
988 adapter->need_ioport = need_ioport;
994 hw->hw_addr = pci_ioremap_bar(pdev, BAR_0);
998 if (adapter->need_ioport) {
999 for (i = BAR_1; i <= BAR_5; i++) {
1000 if (pci_resource_len(pdev, i) == 0)
1002 if (pci_resource_flags(pdev, i) & IORESOURCE_IO) {
1003 hw->io_base = pci_resource_start(pdev, i);
1009 /* make ready for any if (hw->...) below */
1010 err = e1000_init_hw_struct(adapter, hw);
1015 * there is a workaround being applied below that limits
1016 * 64-bit DMA addresses to 64-bit hardware. There are some
1017 * 32-bit adapters that Tx hang when given 64-bit DMA addresses
1020 if ((hw->bus_type == e1000_bus_type_pcix) &&
1021 !dma_set_mask(&pdev->dev, DMA_BIT_MASK(64))) {
1023 * according to DMA-API-HOWTO, coherent calls will always
1024 * succeed if the set call did
1026 dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64));
1029 err = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32));
1031 pr_err("No usable DMA config, aborting\n");
1034 dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
1037 netdev->netdev_ops = &e1000_netdev_ops;
1038 e1000_set_ethtool_ops(netdev);
1039 netdev->watchdog_timeo = 5 * HZ;
1040 netif_napi_add(netdev, &adapter->napi, e1000_clean, 64);
1042 strncpy(netdev->name, pci_name(pdev), sizeof(netdev->name) - 1);
1044 adapter->bd_number = cards_found;
1046 /* setup the private structure */
1048 err = e1000_sw_init(adapter);
1053 if (hw->mac_type == e1000_ce4100) {
1054 hw->ce4100_gbe_mdio_base_virt =
1055 ioremap(pci_resource_start(pdev, BAR_1),
1056 pci_resource_len(pdev, BAR_1));
1058 if (!hw->ce4100_gbe_mdio_base_virt)
1059 goto err_mdio_ioremap;
1062 if (hw->mac_type >= e1000_82543) {
1063 netdev->hw_features = NETIF_F_SG |
1066 netdev->features = NETIF_F_HW_VLAN_TX |
1067 NETIF_F_HW_VLAN_FILTER;
1070 if ((hw->mac_type >= e1000_82544) &&
1071 (hw->mac_type != e1000_82547))
1072 netdev->hw_features |= NETIF_F_TSO;
1074 netdev->priv_flags |= IFF_SUPP_NOFCS;
1076 netdev->features |= netdev->hw_features;
1077 netdev->hw_features |= NETIF_F_RXCSUM;
1078 netdev->hw_features |= NETIF_F_RXALL;
1079 netdev->hw_features |= NETIF_F_RXFCS;
1081 if (pci_using_dac) {
1082 netdev->features |= NETIF_F_HIGHDMA;
1083 netdev->vlan_features |= NETIF_F_HIGHDMA;
1086 netdev->vlan_features |= NETIF_F_TSO;
1087 netdev->vlan_features |= NETIF_F_HW_CSUM;
1088 netdev->vlan_features |= NETIF_F_SG;
1090 netdev->priv_flags |= IFF_UNICAST_FLT;
1092 adapter->en_mng_pt = e1000_enable_mng_pass_thru(hw);
1094 /* initialize eeprom parameters */
1095 if (e1000_init_eeprom_params(hw)) {
1096 e_err(probe, "EEPROM initialization failed\n");
1100 /* before reading the EEPROM, reset the controller to
1101 * put the device in a known good starting state */
1105 /* make sure the EEPROM is good */
1106 if (e1000_validate_eeprom_checksum(hw) < 0) {
1107 e_err(probe, "The EEPROM Checksum Is Not Valid\n");
1108 e1000_dump_eeprom(adapter);
1110 * set MAC address to all zeroes to invalidate and temporary
1111 * disable this device for the user. This blocks regular
1112 * traffic while still permitting ethtool ioctls from reaching
1113 * the hardware as well as allowing the user to run the
1114 * interface after manually setting a hw addr using
1117 memset(hw->mac_addr, 0, netdev->addr_len);
1119 /* copy the MAC address out of the EEPROM */
1120 if (e1000_read_mac_addr(hw))
1121 e_err(probe, "EEPROM Read Error\n");
1123 /* don't block initalization here due to bad MAC address */
1124 memcpy(netdev->dev_addr, hw->mac_addr, netdev->addr_len);
1125 memcpy(netdev->perm_addr, hw->mac_addr, netdev->addr_len);
1127 if (!is_valid_ether_addr(netdev->perm_addr))
1128 e_err(probe, "Invalid MAC Address\n");
1131 INIT_DELAYED_WORK(&adapter->watchdog_task, e1000_watchdog);
1132 INIT_DELAYED_WORK(&adapter->fifo_stall_task,
1133 e1000_82547_tx_fifo_stall_task);
1134 INIT_DELAYED_WORK(&adapter->phy_info_task, e1000_update_phy_info_task);
1135 INIT_WORK(&adapter->reset_task, e1000_reset_task);
1137 e1000_check_options(adapter);
1139 /* Initial Wake on LAN setting
1140 * If APM wake is enabled in the EEPROM,
1141 * enable the ACPI Magic Packet filter
1144 switch (hw->mac_type) {
1145 case e1000_82542_rev2_0:
1146 case e1000_82542_rev2_1:
1150 e1000_read_eeprom(hw,
1151 EEPROM_INIT_CONTROL2_REG, 1, &eeprom_data);
1152 eeprom_apme_mask = E1000_EEPROM_82544_APM;
1155 case e1000_82546_rev_3:
1156 if (er32(STATUS) & E1000_STATUS_FUNC_1){
1157 e1000_read_eeprom(hw,
1158 EEPROM_INIT_CONTROL3_PORT_B, 1, &eeprom_data);
1163 e1000_read_eeprom(hw,
1164 EEPROM_INIT_CONTROL3_PORT_A, 1, &eeprom_data);
1167 if (eeprom_data & eeprom_apme_mask)
1168 adapter->eeprom_wol |= E1000_WUFC_MAG;
1170 /* now that we have the eeprom settings, apply the special cases
1171 * where the eeprom may be wrong or the board simply won't support
1172 * wake on lan on a particular port */
1173 switch (pdev->device) {
1174 case E1000_DEV_ID_82546GB_PCIE:
1175 adapter->eeprom_wol = 0;
1177 case E1000_DEV_ID_82546EB_FIBER:
1178 case E1000_DEV_ID_82546GB_FIBER:
1179 /* Wake events only supported on port A for dual fiber
1180 * regardless of eeprom setting */
1181 if (er32(STATUS) & E1000_STATUS_FUNC_1)
1182 adapter->eeprom_wol = 0;
1184 case E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3:
1185 /* if quad port adapter, disable WoL on all but port A */
1186 if (global_quad_port_a != 0)
1187 adapter->eeprom_wol = 0;
1189 adapter->quad_port_a = true;
1190 /* Reset for multiple quad port adapters */
1191 if (++global_quad_port_a == 4)
1192 global_quad_port_a = 0;
1196 /* initialize the wol settings based on the eeprom settings */
1197 adapter->wol = adapter->eeprom_wol;
1198 device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol);
1200 /* Auto detect PHY address */
1201 if (hw->mac_type == e1000_ce4100) {
1202 for (i = 0; i < 32; i++) {
1204 e1000_read_phy_reg(hw, PHY_ID2, &tmp);
1205 if (tmp == 0 || tmp == 0xFF) {
1214 /* reset the hardware with the new settings */
1215 e1000_reset(adapter);
1217 strcpy(netdev->name, "eth%d");
1218 err = register_netdev(netdev);
1222 e1000_vlan_filter_on_off(adapter, false);
1224 /* print bus type/speed/width info */
1225 e_info(probe, "(PCI%s:%dMHz:%d-bit) %pM\n",
1226 ((hw->bus_type == e1000_bus_type_pcix) ? "-X" : ""),
1227 ((hw->bus_speed == e1000_bus_speed_133) ? 133 :
1228 (hw->bus_speed == e1000_bus_speed_120) ? 120 :
1229 (hw->bus_speed == e1000_bus_speed_100) ? 100 :
1230 (hw->bus_speed == e1000_bus_speed_66) ? 66 : 33),
1231 ((hw->bus_width == e1000_bus_width_64) ? 64 : 32),
1234 /* carrier off reporting is important to ethtool even BEFORE open */
1235 netif_carrier_off(netdev);
1237 e_info(probe, "Intel(R) PRO/1000 Network Connection\n");
1244 e1000_phy_hw_reset(hw);
1246 if (hw->flash_address)
1247 iounmap(hw->flash_address);
1248 kfree(adapter->tx_ring);
1249 kfree(adapter->rx_ring);
1253 iounmap(hw->ce4100_gbe_mdio_base_virt);
1254 iounmap(hw->hw_addr);
1256 free_netdev(netdev);
1258 pci_release_selected_regions(pdev, bars);
1260 pci_disable_device(pdev);
1265 * e1000_remove - Device Removal Routine
1266 * @pdev: PCI device information struct
1268 * e1000_remove is called by the PCI subsystem to alert the driver
1269 * that it should release a PCI device. The could be caused by a
1270 * Hot-Plug event, or because the driver is going to be removed from
1274 static void __devexit e1000_remove(struct pci_dev *pdev)
1276 struct net_device *netdev = pci_get_drvdata(pdev);
1277 struct e1000_adapter *adapter = netdev_priv(netdev);
1278 struct e1000_hw *hw = &adapter->hw;
1280 e1000_down_and_stop(adapter);
1281 e1000_release_manageability(adapter);
1283 unregister_netdev(netdev);
1285 e1000_phy_hw_reset(hw);
1287 kfree(adapter->tx_ring);
1288 kfree(adapter->rx_ring);
1290 if (hw->mac_type == e1000_ce4100)
1291 iounmap(hw->ce4100_gbe_mdio_base_virt);
1292 iounmap(hw->hw_addr);
1293 if (hw->flash_address)
1294 iounmap(hw->flash_address);
1295 pci_release_selected_regions(pdev, adapter->bars);
1297 free_netdev(netdev);
1299 pci_disable_device(pdev);
1303 * e1000_sw_init - Initialize general software structures (struct e1000_adapter)
1304 * @adapter: board private structure to initialize
1306 * e1000_sw_init initializes the Adapter private data structure.
1307 * e1000_init_hw_struct MUST be called before this function
1310 static int __devinit e1000_sw_init(struct e1000_adapter *adapter)
1312 adapter->rx_buffer_len = MAXIMUM_ETHERNET_VLAN_SIZE;
1314 adapter->num_tx_queues = 1;
1315 adapter->num_rx_queues = 1;
1317 if (e1000_alloc_queues(adapter)) {
1318 e_err(probe, "Unable to allocate memory for queues\n");
1322 /* Explicitly disable IRQ since the NIC can be in any state. */
1323 e1000_irq_disable(adapter);
1325 spin_lock_init(&adapter->stats_lock);
1326 mutex_init(&adapter->mutex);
1328 set_bit(__E1000_DOWN, &adapter->flags);
1334 * e1000_alloc_queues - Allocate memory for all rings
1335 * @adapter: board private structure to initialize
1337 * We allocate one ring per queue at run-time since we don't know the
1338 * number of queues at compile-time.
1341 static int __devinit e1000_alloc_queues(struct e1000_adapter *adapter)
1343 adapter->tx_ring = kcalloc(adapter->num_tx_queues,
1344 sizeof(struct e1000_tx_ring), GFP_KERNEL);
1345 if (!adapter->tx_ring)
1348 adapter->rx_ring = kcalloc(adapter->num_rx_queues,
1349 sizeof(struct e1000_rx_ring), GFP_KERNEL);
1350 if (!adapter->rx_ring) {
1351 kfree(adapter->tx_ring);
1355 return E1000_SUCCESS;
1359 * e1000_open - Called when a network interface is made active
1360 * @netdev: network interface device structure
1362 * Returns 0 on success, negative value on failure
1364 * The open entry point is called when a network interface is made
1365 * active by the system (IFF_UP). At this point all resources needed
1366 * for transmit and receive operations are allocated, the interrupt
1367 * handler is registered with the OS, the watchdog task is started,
1368 * and the stack is notified that the interface is ready.
1371 static int e1000_open(struct net_device *netdev)
1373 struct e1000_adapter *adapter = netdev_priv(netdev);
1374 struct e1000_hw *hw = &adapter->hw;
1377 /* disallow open during test */
1378 if (test_bit(__E1000_TESTING, &adapter->flags))
1381 netif_carrier_off(netdev);
1383 /* allocate transmit descriptors */
1384 err = e1000_setup_all_tx_resources(adapter);
1388 /* allocate receive descriptors */
1389 err = e1000_setup_all_rx_resources(adapter);
1393 e1000_power_up_phy(adapter);
1395 adapter->mng_vlan_id = E1000_MNG_VLAN_NONE;
1396 if ((hw->mng_cookie.status &
1397 E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT)) {
1398 e1000_update_mng_vlan(adapter);
1401 /* before we allocate an interrupt, we must be ready to handle it.
1402 * Setting DEBUG_SHIRQ in the kernel makes it fire an interrupt
1403 * as soon as we call pci_request_irq, so we have to setup our
1404 * clean_rx handler before we do so. */
1405 e1000_configure(adapter);
1407 err = e1000_request_irq(adapter);
1411 /* From here on the code is the same as e1000_up() */
1412 clear_bit(__E1000_DOWN, &adapter->flags);
1414 napi_enable(&adapter->napi);
1416 e1000_irq_enable(adapter);
1418 netif_start_queue(netdev);
1420 /* fire a link status change interrupt to start the watchdog */
1421 ew32(ICS, E1000_ICS_LSC);
1423 return E1000_SUCCESS;
1426 e1000_power_down_phy(adapter);
1427 e1000_free_all_rx_resources(adapter);
1429 e1000_free_all_tx_resources(adapter);
1431 e1000_reset(adapter);
1437 * e1000_close - Disables a network interface
1438 * @netdev: network interface device structure
1440 * Returns 0, this is not allowed to fail
1442 * The close entry point is called when an interface is de-activated
1443 * by the OS. The hardware is still under the drivers control, but
1444 * needs to be disabled. A global MAC reset is issued to stop the
1445 * hardware, and all transmit and receive resources are freed.
1448 static int e1000_close(struct net_device *netdev)
1450 struct e1000_adapter *adapter = netdev_priv(netdev);
1451 struct e1000_hw *hw = &adapter->hw;
1453 WARN_ON(test_bit(__E1000_RESETTING, &adapter->flags));
1454 e1000_down(adapter);
1455 e1000_power_down_phy(adapter);
1456 e1000_free_irq(adapter);
1458 e1000_free_all_tx_resources(adapter);
1459 e1000_free_all_rx_resources(adapter);
1461 /* kill manageability vlan ID if supported, but not if a vlan with
1462 * the same ID is registered on the host OS (let 8021q kill it) */
1463 if ((hw->mng_cookie.status &
1464 E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT) &&
1465 !test_bit(adapter->mng_vlan_id, adapter->active_vlans)) {
1466 e1000_vlan_rx_kill_vid(netdev, adapter->mng_vlan_id);
1473 * e1000_check_64k_bound - check that memory doesn't cross 64kB boundary
1474 * @adapter: address of board private structure
1475 * @start: address of beginning of memory
1476 * @len: length of memory
1478 static bool e1000_check_64k_bound(struct e1000_adapter *adapter, void *start,
1481 struct e1000_hw *hw = &adapter->hw;
1482 unsigned long begin = (unsigned long)start;
1483 unsigned long end = begin + len;
1485 /* First rev 82545 and 82546 need to not allow any memory
1486 * write location to cross 64k boundary due to errata 23 */
1487 if (hw->mac_type == e1000_82545 ||
1488 hw->mac_type == e1000_ce4100 ||
1489 hw->mac_type == e1000_82546) {
1490 return ((begin ^ (end - 1)) >> 16) != 0 ? false : true;
1497 * e1000_setup_tx_resources - allocate Tx resources (Descriptors)
1498 * @adapter: board private structure
1499 * @txdr: tx descriptor ring (for a specific queue) to setup
1501 * Return 0 on success, negative on failure
1504 static int e1000_setup_tx_resources(struct e1000_adapter *adapter,
1505 struct e1000_tx_ring *txdr)
1507 struct pci_dev *pdev = adapter->pdev;
1510 size = sizeof(struct e1000_buffer) * txdr->count;
1511 txdr->buffer_info = vzalloc(size);
1512 if (!txdr->buffer_info) {
1513 e_err(probe, "Unable to allocate memory for the Tx descriptor "
1518 /* round up to nearest 4K */
1520 txdr->size = txdr->count * sizeof(struct e1000_tx_desc);
1521 txdr->size = ALIGN(txdr->size, 4096);
1523 txdr->desc = dma_alloc_coherent(&pdev->dev, txdr->size, &txdr->dma,
1527 vfree(txdr->buffer_info);
1528 e_err(probe, "Unable to allocate memory for the Tx descriptor "
1533 /* Fix for errata 23, can't cross 64kB boundary */
1534 if (!e1000_check_64k_bound(adapter, txdr->desc, txdr->size)) {
1535 void *olddesc = txdr->desc;
1536 dma_addr_t olddma = txdr->dma;
1537 e_err(tx_err, "txdr align check failed: %u bytes at %p\n",
1538 txdr->size, txdr->desc);
1539 /* Try again, without freeing the previous */
1540 txdr->desc = dma_alloc_coherent(&pdev->dev, txdr->size,
1541 &txdr->dma, GFP_KERNEL);
1542 /* Failed allocation, critical failure */
1544 dma_free_coherent(&pdev->dev, txdr->size, olddesc,
1546 goto setup_tx_desc_die;
1549 if (!e1000_check_64k_bound(adapter, txdr->desc, txdr->size)) {
1551 dma_free_coherent(&pdev->dev, txdr->size, txdr->desc,
1553 dma_free_coherent(&pdev->dev, txdr->size, olddesc,
1555 e_err(probe, "Unable to allocate aligned memory "
1556 "for the transmit descriptor ring\n");
1557 vfree(txdr->buffer_info);
1560 /* Free old allocation, new allocation was successful */
1561 dma_free_coherent(&pdev->dev, txdr->size, olddesc,
1565 memset(txdr->desc, 0, txdr->size);
1567 txdr->next_to_use = 0;
1568 txdr->next_to_clean = 0;
1574 * e1000_setup_all_tx_resources - wrapper to allocate Tx resources
1575 * (Descriptors) for all queues
1576 * @adapter: board private structure
1578 * Return 0 on success, negative on failure
1581 int e1000_setup_all_tx_resources(struct e1000_adapter *adapter)
1585 for (i = 0; i < adapter->num_tx_queues; i++) {
1586 err = e1000_setup_tx_resources(adapter, &adapter->tx_ring[i]);
1588 e_err(probe, "Allocation for Tx Queue %u failed\n", i);
1589 for (i-- ; i >= 0; i--)
1590 e1000_free_tx_resources(adapter,
1591 &adapter->tx_ring[i]);
1600 * e1000_configure_tx - Configure 8254x Transmit Unit after Reset
1601 * @adapter: board private structure
1603 * Configure the Tx unit of the MAC after a reset.
1606 static void e1000_configure_tx(struct e1000_adapter *adapter)
1609 struct e1000_hw *hw = &adapter->hw;
1610 u32 tdlen, tctl, tipg;
1613 /* Setup the HW Tx Head and Tail descriptor pointers */
1615 switch (adapter->num_tx_queues) {
1618 tdba = adapter->tx_ring[0].dma;
1619 tdlen = adapter->tx_ring[0].count *
1620 sizeof(struct e1000_tx_desc);
1622 ew32(TDBAH, (tdba >> 32));
1623 ew32(TDBAL, (tdba & 0x00000000ffffffffULL));
1626 adapter->tx_ring[0].tdh = ((hw->mac_type >= e1000_82543) ? E1000_TDH : E1000_82542_TDH);
1627 adapter->tx_ring[0].tdt = ((hw->mac_type >= e1000_82543) ? E1000_TDT : E1000_82542_TDT);
1631 /* Set the default values for the Tx Inter Packet Gap timer */
1632 if ((hw->media_type == e1000_media_type_fiber ||
1633 hw->media_type == e1000_media_type_internal_serdes))
1634 tipg = DEFAULT_82543_TIPG_IPGT_FIBER;
1636 tipg = DEFAULT_82543_TIPG_IPGT_COPPER;
1638 switch (hw->mac_type) {
1639 case e1000_82542_rev2_0:
1640 case e1000_82542_rev2_1:
1641 tipg = DEFAULT_82542_TIPG_IPGT;
1642 ipgr1 = DEFAULT_82542_TIPG_IPGR1;
1643 ipgr2 = DEFAULT_82542_TIPG_IPGR2;
1646 ipgr1 = DEFAULT_82543_TIPG_IPGR1;
1647 ipgr2 = DEFAULT_82543_TIPG_IPGR2;
1650 tipg |= ipgr1 << E1000_TIPG_IPGR1_SHIFT;
1651 tipg |= ipgr2 << E1000_TIPG_IPGR2_SHIFT;
1654 /* Set the Tx Interrupt Delay register */
1656 ew32(TIDV, adapter->tx_int_delay);
1657 if (hw->mac_type >= e1000_82540)
1658 ew32(TADV, adapter->tx_abs_int_delay);
1660 /* Program the Transmit Control Register */
1663 tctl &= ~E1000_TCTL_CT;
1664 tctl |= E1000_TCTL_PSP | E1000_TCTL_RTLC |
1665 (E1000_COLLISION_THRESHOLD << E1000_CT_SHIFT);
1667 e1000_config_collision_dist(hw);
1669 /* Setup Transmit Descriptor Settings for eop descriptor */
1670 adapter->txd_cmd = E1000_TXD_CMD_EOP | E1000_TXD_CMD_IFCS;
1672 /* only set IDE if we are delaying interrupts using the timers */
1673 if (adapter->tx_int_delay)
1674 adapter->txd_cmd |= E1000_TXD_CMD_IDE;
1676 if (hw->mac_type < e1000_82543)
1677 adapter->txd_cmd |= E1000_TXD_CMD_RPS;
1679 adapter->txd_cmd |= E1000_TXD_CMD_RS;
1681 /* Cache if we're 82544 running in PCI-X because we'll
1682 * need this to apply a workaround later in the send path. */
1683 if (hw->mac_type == e1000_82544 &&
1684 hw->bus_type == e1000_bus_type_pcix)
1685 adapter->pcix_82544 = true;
1692 * e1000_setup_rx_resources - allocate Rx resources (Descriptors)
1693 * @adapter: board private structure
1694 * @rxdr: rx descriptor ring (for a specific queue) to setup
1696 * Returns 0 on success, negative on failure
1699 static int e1000_setup_rx_resources(struct e1000_adapter *adapter,
1700 struct e1000_rx_ring *rxdr)
1702 struct pci_dev *pdev = adapter->pdev;
1705 size = sizeof(struct e1000_buffer) * rxdr->count;
1706 rxdr->buffer_info = vzalloc(size);
1707 if (!rxdr->buffer_info) {
1708 e_err(probe, "Unable to allocate memory for the Rx descriptor "
1713 desc_len = sizeof(struct e1000_rx_desc);
1715 /* Round up to nearest 4K */
1717 rxdr->size = rxdr->count * desc_len;
1718 rxdr->size = ALIGN(rxdr->size, 4096);
1720 rxdr->desc = dma_alloc_coherent(&pdev->dev, rxdr->size, &rxdr->dma,
1724 e_err(probe, "Unable to allocate memory for the Rx descriptor "
1727 vfree(rxdr->buffer_info);
1731 /* Fix for errata 23, can't cross 64kB boundary */
1732 if (!e1000_check_64k_bound(adapter, rxdr->desc, rxdr->size)) {
1733 void *olddesc = rxdr->desc;
1734 dma_addr_t olddma = rxdr->dma;
1735 e_err(rx_err, "rxdr align check failed: %u bytes at %p\n",
1736 rxdr->size, rxdr->desc);
1737 /* Try again, without freeing the previous */
1738 rxdr->desc = dma_alloc_coherent(&pdev->dev, rxdr->size,
1739 &rxdr->dma, GFP_KERNEL);
1740 /* Failed allocation, critical failure */
1742 dma_free_coherent(&pdev->dev, rxdr->size, olddesc,
1744 e_err(probe, "Unable to allocate memory for the Rx "
1745 "descriptor ring\n");
1746 goto setup_rx_desc_die;
1749 if (!e1000_check_64k_bound(adapter, rxdr->desc, rxdr->size)) {
1751 dma_free_coherent(&pdev->dev, rxdr->size, rxdr->desc,
1753 dma_free_coherent(&pdev->dev, rxdr->size, olddesc,
1755 e_err(probe, "Unable to allocate aligned memory for "
1756 "the Rx descriptor ring\n");
1757 goto setup_rx_desc_die;
1759 /* Free old allocation, new allocation was successful */
1760 dma_free_coherent(&pdev->dev, rxdr->size, olddesc,
1764 memset(rxdr->desc, 0, rxdr->size);
1766 rxdr->next_to_clean = 0;
1767 rxdr->next_to_use = 0;
1768 rxdr->rx_skb_top = NULL;
1774 * e1000_setup_all_rx_resources - wrapper to allocate Rx resources
1775 * (Descriptors) for all queues
1776 * @adapter: board private structure
1778 * Return 0 on success, negative on failure
1781 int e1000_setup_all_rx_resources(struct e1000_adapter *adapter)
1785 for (i = 0; i < adapter->num_rx_queues; i++) {
1786 err = e1000_setup_rx_resources(adapter, &adapter->rx_ring[i]);
1788 e_err(probe, "Allocation for Rx Queue %u failed\n", i);
1789 for (i-- ; i >= 0; i--)
1790 e1000_free_rx_resources(adapter,
1791 &adapter->rx_ring[i]);
1800 * e1000_setup_rctl - configure the receive control registers
1801 * @adapter: Board private structure
1803 static void e1000_setup_rctl(struct e1000_adapter *adapter)
1805 struct e1000_hw *hw = &adapter->hw;
1810 rctl &= ~(3 << E1000_RCTL_MO_SHIFT);
1812 rctl |= E1000_RCTL_BAM | E1000_RCTL_LBM_NO |
1813 E1000_RCTL_RDMTS_HALF |
1814 (hw->mc_filter_type << E1000_RCTL_MO_SHIFT);
1816 if (hw->tbi_compatibility_on == 1)
1817 rctl |= E1000_RCTL_SBP;
1819 rctl &= ~E1000_RCTL_SBP;
1821 if (adapter->netdev->mtu <= ETH_DATA_LEN)
1822 rctl &= ~E1000_RCTL_LPE;
1824 rctl |= E1000_RCTL_LPE;
1826 /* Setup buffer sizes */
1827 rctl &= ~E1000_RCTL_SZ_4096;
1828 rctl |= E1000_RCTL_BSEX;
1829 switch (adapter->rx_buffer_len) {
1830 case E1000_RXBUFFER_2048:
1832 rctl |= E1000_RCTL_SZ_2048;
1833 rctl &= ~E1000_RCTL_BSEX;
1835 case E1000_RXBUFFER_4096:
1836 rctl |= E1000_RCTL_SZ_4096;
1838 case E1000_RXBUFFER_8192:
1839 rctl |= E1000_RCTL_SZ_8192;
1841 case E1000_RXBUFFER_16384:
1842 rctl |= E1000_RCTL_SZ_16384;
1846 /* This is useful for sniffing bad packets. */
1847 if (adapter->netdev->features & NETIF_F_RXALL) {
1848 /* UPE and MPE will be handled by normal PROMISC logic
1849 * in e1000e_set_rx_mode */
1850 rctl |= (E1000_RCTL_SBP | /* Receive bad packets */
1851 E1000_RCTL_BAM | /* RX All Bcast Pkts */
1852 E1000_RCTL_PMCF); /* RX All MAC Ctrl Pkts */
1854 rctl &= ~(E1000_RCTL_VFE | /* Disable VLAN filter */
1855 E1000_RCTL_DPF | /* Allow filtered pause */
1856 E1000_RCTL_CFIEN); /* Dis VLAN CFIEN Filter */
1857 /* Do not mess with E1000_CTRL_VME, it affects transmit as well,
1858 * and that breaks VLANs.
1866 * e1000_configure_rx - Configure 8254x Receive Unit after Reset
1867 * @adapter: board private structure
1869 * Configure the Rx unit of the MAC after a reset.
1872 static void e1000_configure_rx(struct e1000_adapter *adapter)
1875 struct e1000_hw *hw = &adapter->hw;
1876 u32 rdlen, rctl, rxcsum;
1878 if (adapter->netdev->mtu > ETH_DATA_LEN) {
1879 rdlen = adapter->rx_ring[0].count *
1880 sizeof(struct e1000_rx_desc);
1881 adapter->clean_rx = e1000_clean_jumbo_rx_irq;
1882 adapter->alloc_rx_buf = e1000_alloc_jumbo_rx_buffers;
1884 rdlen = adapter->rx_ring[0].count *
1885 sizeof(struct e1000_rx_desc);
1886 adapter->clean_rx = e1000_clean_rx_irq;
1887 adapter->alloc_rx_buf = e1000_alloc_rx_buffers;
1890 /* disable receives while setting up the descriptors */
1892 ew32(RCTL, rctl & ~E1000_RCTL_EN);
1894 /* set the Receive Delay Timer Register */
1895 ew32(RDTR, adapter->rx_int_delay);
1897 if (hw->mac_type >= e1000_82540) {
1898 ew32(RADV, adapter->rx_abs_int_delay);
1899 if (adapter->itr_setting != 0)
1900 ew32(ITR, 1000000000 / (adapter->itr * 256));
1903 /* Setup the HW Rx Head and Tail Descriptor Pointers and
1904 * the Base and Length of the Rx Descriptor Ring */
1905 switch (adapter->num_rx_queues) {
1908 rdba = adapter->rx_ring[0].dma;
1910 ew32(RDBAH, (rdba >> 32));
1911 ew32(RDBAL, (rdba & 0x00000000ffffffffULL));
1914 adapter->rx_ring[0].rdh = ((hw->mac_type >= e1000_82543) ? E1000_RDH : E1000_82542_RDH);
1915 adapter->rx_ring[0].rdt = ((hw->mac_type >= e1000_82543) ? E1000_RDT : E1000_82542_RDT);
1919 /* Enable 82543 Receive Checksum Offload for TCP and UDP */
1920 if (hw->mac_type >= e1000_82543) {
1921 rxcsum = er32(RXCSUM);
1922 if (adapter->rx_csum)
1923 rxcsum |= E1000_RXCSUM_TUOFL;
1925 /* don't need to clear IPPCSE as it defaults to 0 */
1926 rxcsum &= ~E1000_RXCSUM_TUOFL;
1927 ew32(RXCSUM, rxcsum);
1930 /* Enable Receives */
1931 ew32(RCTL, rctl | E1000_RCTL_EN);
1935 * e1000_free_tx_resources - Free Tx Resources per Queue
1936 * @adapter: board private structure
1937 * @tx_ring: Tx descriptor ring for a specific queue
1939 * Free all transmit software resources
1942 static void e1000_free_tx_resources(struct e1000_adapter *adapter,
1943 struct e1000_tx_ring *tx_ring)
1945 struct pci_dev *pdev = adapter->pdev;
1947 e1000_clean_tx_ring(adapter, tx_ring);
1949 vfree(tx_ring->buffer_info);
1950 tx_ring->buffer_info = NULL;
1952 dma_free_coherent(&pdev->dev, tx_ring->size, tx_ring->desc,
1955 tx_ring->desc = NULL;
1959 * e1000_free_all_tx_resources - Free Tx Resources for All Queues
1960 * @adapter: board private structure
1962 * Free all transmit software resources
1965 void e1000_free_all_tx_resources(struct e1000_adapter *adapter)
1969 for (i = 0; i < adapter->num_tx_queues; i++)
1970 e1000_free_tx_resources(adapter, &adapter->tx_ring[i]);
1973 static void e1000_unmap_and_free_tx_resource(struct e1000_adapter *adapter,
1974 struct e1000_buffer *buffer_info)
1976 if (buffer_info->dma) {
1977 if (buffer_info->mapped_as_page)
1978 dma_unmap_page(&adapter->pdev->dev, buffer_info->dma,
1979 buffer_info->length, DMA_TO_DEVICE);
1981 dma_unmap_single(&adapter->pdev->dev, buffer_info->dma,
1982 buffer_info->length,
1984 buffer_info->dma = 0;
1986 if (buffer_info->skb) {
1987 dev_kfree_skb_any(buffer_info->skb);
1988 buffer_info->skb = NULL;
1990 buffer_info->time_stamp = 0;
1991 /* buffer_info must be completely set up in the transmit path */
1995 * e1000_clean_tx_ring - Free Tx Buffers
1996 * @adapter: board private structure
1997 * @tx_ring: ring to be cleaned
2000 static void e1000_clean_tx_ring(struct e1000_adapter *adapter,
2001 struct e1000_tx_ring *tx_ring)
2003 struct e1000_hw *hw = &adapter->hw;
2004 struct e1000_buffer *buffer_info;
2008 /* Free all the Tx ring sk_buffs */
2010 for (i = 0; i < tx_ring->count; i++) {
2011 buffer_info = &tx_ring->buffer_info[i];
2012 e1000_unmap_and_free_tx_resource(adapter, buffer_info);
2015 size = sizeof(struct e1000_buffer) * tx_ring->count;
2016 memset(tx_ring->buffer_info, 0, size);
2018 /* Zero out the descriptor ring */
2020 memset(tx_ring->desc, 0, tx_ring->size);
2022 tx_ring->next_to_use = 0;
2023 tx_ring->next_to_clean = 0;
2024 tx_ring->last_tx_tso = false;
2026 writel(0, hw->hw_addr + tx_ring->tdh);
2027 writel(0, hw->hw_addr + tx_ring->tdt);
2031 * e1000_clean_all_tx_rings - Free Tx Buffers for all queues
2032 * @adapter: board private structure
2035 static void e1000_clean_all_tx_rings(struct e1000_adapter *adapter)
2039 for (i = 0; i < adapter->num_tx_queues; i++)
2040 e1000_clean_tx_ring(adapter, &adapter->tx_ring[i]);
2044 * e1000_free_rx_resources - Free Rx Resources
2045 * @adapter: board private structure
2046 * @rx_ring: ring to clean the resources from
2048 * Free all receive software resources
2051 static void e1000_free_rx_resources(struct e1000_adapter *adapter,
2052 struct e1000_rx_ring *rx_ring)
2054 struct pci_dev *pdev = adapter->pdev;
2056 e1000_clean_rx_ring(adapter, rx_ring);
2058 vfree(rx_ring->buffer_info);
2059 rx_ring->buffer_info = NULL;
2061 dma_free_coherent(&pdev->dev, rx_ring->size, rx_ring->desc,
2064 rx_ring->desc = NULL;
2068 * e1000_free_all_rx_resources - Free Rx Resources for All Queues
2069 * @adapter: board private structure
2071 * Free all receive software resources
2074 void e1000_free_all_rx_resources(struct e1000_adapter *adapter)
2078 for (i = 0; i < adapter->num_rx_queues; i++)
2079 e1000_free_rx_resources(adapter, &adapter->rx_ring[i]);
2083 * e1000_clean_rx_ring - Free Rx Buffers per Queue
2084 * @adapter: board private structure
2085 * @rx_ring: ring to free buffers from
2088 static void e1000_clean_rx_ring(struct e1000_adapter *adapter,
2089 struct e1000_rx_ring *rx_ring)
2091 struct e1000_hw *hw = &adapter->hw;
2092 struct e1000_buffer *buffer_info;
2093 struct pci_dev *pdev = adapter->pdev;
2097 /* Free all the Rx ring sk_buffs */
2098 for (i = 0; i < rx_ring->count; i++) {
2099 buffer_info = &rx_ring->buffer_info[i];
2100 if (buffer_info->dma &&
2101 adapter->clean_rx == e1000_clean_rx_irq) {
2102 dma_unmap_single(&pdev->dev, buffer_info->dma,
2103 buffer_info->length,
2105 } else if (buffer_info->dma &&
2106 adapter->clean_rx == e1000_clean_jumbo_rx_irq) {
2107 dma_unmap_page(&pdev->dev, buffer_info->dma,
2108 buffer_info->length,
2112 buffer_info->dma = 0;
2113 if (buffer_info->page) {
2114 put_page(buffer_info->page);
2115 buffer_info->page = NULL;
2117 if (buffer_info->skb) {
2118 dev_kfree_skb(buffer_info->skb);
2119 buffer_info->skb = NULL;
2123 /* there also may be some cached data from a chained receive */
2124 if (rx_ring->rx_skb_top) {
2125 dev_kfree_skb(rx_ring->rx_skb_top);
2126 rx_ring->rx_skb_top = NULL;
2129 size = sizeof(struct e1000_buffer) * rx_ring->count;
2130 memset(rx_ring->buffer_info, 0, size);
2132 /* Zero out the descriptor ring */
2133 memset(rx_ring->desc, 0, rx_ring->size);
2135 rx_ring->next_to_clean = 0;
2136 rx_ring->next_to_use = 0;
2138 writel(0, hw->hw_addr + rx_ring->rdh);
2139 writel(0, hw->hw_addr + rx_ring->rdt);
2143 * e1000_clean_all_rx_rings - Free Rx Buffers for all queues
2144 * @adapter: board private structure
2147 static void e1000_clean_all_rx_rings(struct e1000_adapter *adapter)
2151 for (i = 0; i < adapter->num_rx_queues; i++)
2152 e1000_clean_rx_ring(adapter, &adapter->rx_ring[i]);
2155 /* The 82542 2.0 (revision 2) needs to have the receive unit in reset
2156 * and memory write and invalidate disabled for certain operations
2158 static void e1000_enter_82542_rst(struct e1000_adapter *adapter)
2160 struct e1000_hw *hw = &adapter->hw;
2161 struct net_device *netdev = adapter->netdev;
2164 e1000_pci_clear_mwi(hw);
2167 rctl |= E1000_RCTL_RST;
2169 E1000_WRITE_FLUSH();
2172 if (netif_running(netdev))
2173 e1000_clean_all_rx_rings(adapter);
2176 static void e1000_leave_82542_rst(struct e1000_adapter *adapter)
2178 struct e1000_hw *hw = &adapter->hw;
2179 struct net_device *netdev = adapter->netdev;
2183 rctl &= ~E1000_RCTL_RST;
2185 E1000_WRITE_FLUSH();
2188 if (hw->pci_cmd_word & PCI_COMMAND_INVALIDATE)
2189 e1000_pci_set_mwi(hw);
2191 if (netif_running(netdev)) {
2192 /* No need to loop, because 82542 supports only 1 queue */
2193 struct e1000_rx_ring *ring = &adapter->rx_ring[0];
2194 e1000_configure_rx(adapter);
2195 adapter->alloc_rx_buf(adapter, ring, E1000_DESC_UNUSED(ring));
2200 * e1000_set_mac - Change the Ethernet Address of the NIC
2201 * @netdev: network interface device structure
2202 * @p: pointer to an address structure
2204 * Returns 0 on success, negative on failure
2207 static int e1000_set_mac(struct net_device *netdev, void *p)
2209 struct e1000_adapter *adapter = netdev_priv(netdev);
2210 struct e1000_hw *hw = &adapter->hw;
2211 struct sockaddr *addr = p;
2213 if (!is_valid_ether_addr(addr->sa_data))
2214 return -EADDRNOTAVAIL;
2216 /* 82542 2.0 needs to be in reset to write receive address registers */
2218 if (hw->mac_type == e1000_82542_rev2_0)
2219 e1000_enter_82542_rst(adapter);
2221 memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
2222 memcpy(hw->mac_addr, addr->sa_data, netdev->addr_len);
2224 e1000_rar_set(hw, hw->mac_addr, 0);
2226 if (hw->mac_type == e1000_82542_rev2_0)
2227 e1000_leave_82542_rst(adapter);
2233 * e1000_set_rx_mode - Secondary Unicast, Multicast and Promiscuous mode set
2234 * @netdev: network interface device structure
2236 * The set_rx_mode entry point is called whenever the unicast or multicast
2237 * address lists or the network interface flags are updated. This routine is
2238 * responsible for configuring the hardware for proper unicast, multicast,
2239 * promiscuous mode, and all-multi behavior.
2242 static void e1000_set_rx_mode(struct net_device *netdev)
2244 struct e1000_adapter *adapter = netdev_priv(netdev);
2245 struct e1000_hw *hw = &adapter->hw;
2246 struct netdev_hw_addr *ha;
2247 bool use_uc = false;
2250 int i, rar_entries = E1000_RAR_ENTRIES;
2251 int mta_reg_count = E1000_NUM_MTA_REGISTERS;
2252 u32 *mcarray = kcalloc(mta_reg_count, sizeof(u32), GFP_ATOMIC);
2255 e_err(probe, "memory allocation failed\n");
2259 /* Check for Promiscuous and All Multicast modes */
2263 if (netdev->flags & IFF_PROMISC) {
2264 rctl |= (E1000_RCTL_UPE | E1000_RCTL_MPE);
2265 rctl &= ~E1000_RCTL_VFE;
2267 if (netdev->flags & IFF_ALLMULTI)
2268 rctl |= E1000_RCTL_MPE;
2270 rctl &= ~E1000_RCTL_MPE;
2271 /* Enable VLAN filter if there is a VLAN */
2272 if (e1000_vlan_used(adapter))
2273 rctl |= E1000_RCTL_VFE;
2276 if (netdev_uc_count(netdev) > rar_entries - 1) {
2277 rctl |= E1000_RCTL_UPE;
2278 } else if (!(netdev->flags & IFF_PROMISC)) {
2279 rctl &= ~E1000_RCTL_UPE;
2285 /* 82542 2.0 needs to be in reset to write receive address registers */
2287 if (hw->mac_type == e1000_82542_rev2_0)
2288 e1000_enter_82542_rst(adapter);
2290 /* load the first 14 addresses into the exact filters 1-14. Unicast
2291 * addresses take precedence to avoid disabling unicast filtering
2294 * RAR 0 is used for the station MAC address
2295 * if there are not 14 addresses, go ahead and clear the filters
2299 netdev_for_each_uc_addr(ha, netdev) {
2300 if (i == rar_entries)
2302 e1000_rar_set(hw, ha->addr, i++);
2305 netdev_for_each_mc_addr(ha, netdev) {
2306 if (i == rar_entries) {
2307 /* load any remaining addresses into the hash table */
2308 u32 hash_reg, hash_bit, mta;
2309 hash_value = e1000_hash_mc_addr(hw, ha->addr);
2310 hash_reg = (hash_value >> 5) & 0x7F;
2311 hash_bit = hash_value & 0x1F;
2312 mta = (1 << hash_bit);
2313 mcarray[hash_reg] |= mta;
2315 e1000_rar_set(hw, ha->addr, i++);
2319 for (; i < rar_entries; i++) {
2320 E1000_WRITE_REG_ARRAY(hw, RA, i << 1, 0);
2321 E1000_WRITE_FLUSH();
2322 E1000_WRITE_REG_ARRAY(hw, RA, (i << 1) + 1, 0);
2323 E1000_WRITE_FLUSH();
2326 /* write the hash table completely, write from bottom to avoid
2327 * both stupid write combining chipsets, and flushing each write */
2328 for (i = mta_reg_count - 1; i >= 0 ; i--) {
2330 * If we are on an 82544 has an errata where writing odd
2331 * offsets overwrites the previous even offset, but writing
2332 * backwards over the range solves the issue by always
2333 * writing the odd offset first
2335 E1000_WRITE_REG_ARRAY(hw, MTA, i, mcarray[i]);
2337 E1000_WRITE_FLUSH();
2339 if (hw->mac_type == e1000_82542_rev2_0)
2340 e1000_leave_82542_rst(adapter);
2346 * e1000_update_phy_info_task - get phy info
2347 * @work: work struct contained inside adapter struct
2349 * Need to wait a few seconds after link up to get diagnostic information from
2352 static void e1000_update_phy_info_task(struct work_struct *work)
2354 struct e1000_adapter *adapter = container_of(work,
2355 struct e1000_adapter,
2356 phy_info_task.work);
2357 if (test_bit(__E1000_DOWN, &adapter->flags))
2359 mutex_lock(&adapter->mutex);
2360 e1000_phy_get_info(&adapter->hw, &adapter->phy_info);
2361 mutex_unlock(&adapter->mutex);
2365 * e1000_82547_tx_fifo_stall_task - task to complete work
2366 * @work: work struct contained inside adapter struct
2368 static void e1000_82547_tx_fifo_stall_task(struct work_struct *work)
2370 struct e1000_adapter *adapter = container_of(work,
2371 struct e1000_adapter,
2372 fifo_stall_task.work);
2373 struct e1000_hw *hw = &adapter->hw;
2374 struct net_device *netdev = adapter->netdev;
2377 if (test_bit(__E1000_DOWN, &adapter->flags))
2379 mutex_lock(&adapter->mutex);
2380 if (atomic_read(&adapter->tx_fifo_stall)) {
2381 if ((er32(TDT) == er32(TDH)) &&
2382 (er32(TDFT) == er32(TDFH)) &&
2383 (er32(TDFTS) == er32(TDFHS))) {
2385 ew32(TCTL, tctl & ~E1000_TCTL_EN);
2386 ew32(TDFT, adapter->tx_head_addr);
2387 ew32(TDFH, adapter->tx_head_addr);
2388 ew32(TDFTS, adapter->tx_head_addr);
2389 ew32(TDFHS, adapter->tx_head_addr);
2391 E1000_WRITE_FLUSH();
2393 adapter->tx_fifo_head = 0;
2394 atomic_set(&adapter->tx_fifo_stall, 0);
2395 netif_wake_queue(netdev);
2396 } else if (!test_bit(__E1000_DOWN, &adapter->flags)) {
2397 schedule_delayed_work(&adapter->fifo_stall_task, 1);
2400 mutex_unlock(&adapter->mutex);
2403 bool e1000_has_link(struct e1000_adapter *adapter)
2405 struct e1000_hw *hw = &adapter->hw;
2406 bool link_active = false;
2408 /* get_link_status is set on LSC (link status) interrupt or rx
2409 * sequence error interrupt (except on intel ce4100).
2410 * get_link_status will stay false until the
2411 * e1000_check_for_link establishes link for copper adapters
2414 switch (hw->media_type) {
2415 case e1000_media_type_copper:
2416 if (hw->mac_type == e1000_ce4100)
2417 hw->get_link_status = 1;
2418 if (hw->get_link_status) {
2419 e1000_check_for_link(hw);
2420 link_active = !hw->get_link_status;
2425 case e1000_media_type_fiber:
2426 e1000_check_for_link(hw);
2427 link_active = !!(er32(STATUS) & E1000_STATUS_LU);
2429 case e1000_media_type_internal_serdes:
2430 e1000_check_for_link(hw);
2431 link_active = hw->serdes_has_link;
2441 * e1000_watchdog - work function
2442 * @work: work struct contained inside adapter struct
2444 static void e1000_watchdog(struct work_struct *work)
2446 struct e1000_adapter *adapter = container_of(work,
2447 struct e1000_adapter,
2448 watchdog_task.work);
2449 struct e1000_hw *hw = &adapter->hw;
2450 struct net_device *netdev = adapter->netdev;
2451 struct e1000_tx_ring *txdr = adapter->tx_ring;
2454 if (test_bit(__E1000_DOWN, &adapter->flags))
2457 mutex_lock(&adapter->mutex);
2458 link = e1000_has_link(adapter);
2459 if ((netif_carrier_ok(netdev)) && link)
2463 if (!netif_carrier_ok(netdev)) {
2466 /* update snapshot of PHY registers on LSC */
2467 e1000_get_speed_and_duplex(hw,
2468 &adapter->link_speed,
2469 &adapter->link_duplex);
2472 pr_info("%s NIC Link is Up %d Mbps %s, "
2473 "Flow Control: %s\n",
2475 adapter->link_speed,
2476 adapter->link_duplex == FULL_DUPLEX ?
2477 "Full Duplex" : "Half Duplex",
2478 ((ctrl & E1000_CTRL_TFCE) && (ctrl &
2479 E1000_CTRL_RFCE)) ? "RX/TX" : ((ctrl &
2480 E1000_CTRL_RFCE) ? "RX" : ((ctrl &
2481 E1000_CTRL_TFCE) ? "TX" : "None")));
2483 /* adjust timeout factor according to speed/duplex */
2484 adapter->tx_timeout_factor = 1;
2485 switch (adapter->link_speed) {
2488 adapter->tx_timeout_factor = 16;
2492 /* maybe add some timeout factor ? */
2496 /* enable transmits in the hardware */
2498 tctl |= E1000_TCTL_EN;
2501 netif_carrier_on(netdev);
2502 if (!test_bit(__E1000_DOWN, &adapter->flags))
2503 schedule_delayed_work(&adapter->phy_info_task,
2505 adapter->smartspeed = 0;
2508 if (netif_carrier_ok(netdev)) {
2509 adapter->link_speed = 0;
2510 adapter->link_duplex = 0;
2511 pr_info("%s NIC Link is Down\n",
2513 netif_carrier_off(netdev);
2515 if (!test_bit(__E1000_DOWN, &adapter->flags))
2516 schedule_delayed_work(&adapter->phy_info_task,
2520 e1000_smartspeed(adapter);
2524 e1000_update_stats(adapter);
2526 hw->tx_packet_delta = adapter->stats.tpt - adapter->tpt_old;
2527 adapter->tpt_old = adapter->stats.tpt;
2528 hw->collision_delta = adapter->stats.colc - adapter->colc_old;
2529 adapter->colc_old = adapter->stats.colc;
2531 adapter->gorcl = adapter->stats.gorcl - adapter->gorcl_old;
2532 adapter->gorcl_old = adapter->stats.gorcl;
2533 adapter->gotcl = adapter->stats.gotcl - adapter->gotcl_old;
2534 adapter->gotcl_old = adapter->stats.gotcl;
2536 e1000_update_adaptive(hw);
2538 if (!netif_carrier_ok(netdev)) {
2539 if (E1000_DESC_UNUSED(txdr) + 1 < txdr->count) {
2540 /* We've lost link, so the controller stops DMA,
2541 * but we've got queued Tx work that's never going
2542 * to get done, so reset controller to flush Tx.
2543 * (Do the reset outside of interrupt context). */
2544 adapter->tx_timeout_count++;
2545 schedule_work(&adapter->reset_task);
2546 /* exit immediately since reset is imminent */
2551 /* Simple mode for Interrupt Throttle Rate (ITR) */
2552 if (hw->mac_type >= e1000_82540 && adapter->itr_setting == 4) {
2554 * Symmetric Tx/Rx gets a reduced ITR=2000;
2555 * Total asymmetrical Tx or Rx gets ITR=8000;
2556 * everyone else is between 2000-8000.
2558 u32 goc = (adapter->gotcl + adapter->gorcl) / 10000;
2559 u32 dif = (adapter->gotcl > adapter->gorcl ?
2560 adapter->gotcl - adapter->gorcl :
2561 adapter->gorcl - adapter->gotcl) / 10000;
2562 u32 itr = goc > 0 ? (dif * 6000 / goc + 2000) : 8000;
2564 ew32(ITR, 1000000000 / (itr * 256));
2567 /* Cause software interrupt to ensure rx ring is cleaned */
2568 ew32(ICS, E1000_ICS_RXDMT0);
2570 /* Force detection of hung controller every watchdog period */
2571 adapter->detect_tx_hung = true;
2573 /* Reschedule the task */
2574 if (!test_bit(__E1000_DOWN, &adapter->flags))
2575 schedule_delayed_work(&adapter->watchdog_task, 2 * HZ);
2578 mutex_unlock(&adapter->mutex);
2581 enum latency_range {
2585 latency_invalid = 255
2589 * e1000_update_itr - update the dynamic ITR value based on statistics
2590 * @adapter: pointer to adapter
2591 * @itr_setting: current adapter->itr
2592 * @packets: the number of packets during this measurement interval
2593 * @bytes: the number of bytes during this measurement interval
2595 * Stores a new ITR value based on packets and byte
2596 * counts during the last interrupt. The advantage of per interrupt
2597 * computation is faster updates and more accurate ITR for the current
2598 * traffic pattern. Constants in this function were computed
2599 * based on theoretical maximum wire speed and thresholds were set based
2600 * on testing data as well as attempting to minimize response time
2601 * while increasing bulk throughput.
2602 * this functionality is controlled by the InterruptThrottleRate module
2603 * parameter (see e1000_param.c)
2605 static unsigned int e1000_update_itr(struct e1000_adapter *adapter,
2606 u16 itr_setting, int packets, int bytes)
2608 unsigned int retval = itr_setting;
2609 struct e1000_hw *hw = &adapter->hw;
2611 if (unlikely(hw->mac_type < e1000_82540))
2612 goto update_itr_done;
2615 goto update_itr_done;
2617 switch (itr_setting) {
2618 case lowest_latency:
2619 /* jumbo frames get bulk treatment*/
2620 if (bytes/packets > 8000)
2621 retval = bulk_latency;
2622 else if ((packets < 5) && (bytes > 512))
2623 retval = low_latency;
2625 case low_latency: /* 50 usec aka 20000 ints/s */
2626 if (bytes > 10000) {
2627 /* jumbo frames need bulk latency setting */
2628 if (bytes/packets > 8000)
2629 retval = bulk_latency;
2630 else if ((packets < 10) || ((bytes/packets) > 1200))
2631 retval = bulk_latency;
2632 else if ((packets > 35))
2633 retval = lowest_latency;
2634 } else if (bytes/packets > 2000)
2635 retval = bulk_latency;
2636 else if (packets <= 2 && bytes < 512)
2637 retval = lowest_latency;
2639 case bulk_latency: /* 250 usec aka 4000 ints/s */
2640 if (bytes > 25000) {
2642 retval = low_latency;
2643 } else if (bytes < 6000) {
2644 retval = low_latency;
2653 static void e1000_set_itr(struct e1000_adapter *adapter)
2655 struct e1000_hw *hw = &adapter->hw;
2657 u32 new_itr = adapter->itr;
2659 if (unlikely(hw->mac_type < e1000_82540))
2662 /* for non-gigabit speeds, just fix the interrupt rate at 4000 */
2663 if (unlikely(adapter->link_speed != SPEED_1000)) {
2669 adapter->tx_itr = e1000_update_itr(adapter,
2671 adapter->total_tx_packets,
2672 adapter->total_tx_bytes);
2673 /* conservative mode (itr 3) eliminates the lowest_latency setting */
2674 if (adapter->itr_setting == 3 && adapter->tx_itr == lowest_latency)
2675 adapter->tx_itr = low_latency;
2677 adapter->rx_itr = e1000_update_itr(adapter,
2679 adapter->total_rx_packets,
2680 adapter->total_rx_bytes);
2681 /* conservative mode (itr 3) eliminates the lowest_latency setting */
2682 if (adapter->itr_setting == 3 && adapter->rx_itr == lowest_latency)
2683 adapter->rx_itr = low_latency;
2685 current_itr = max(adapter->rx_itr, adapter->tx_itr);
2687 switch (current_itr) {
2688 /* counts and packets in update_itr are dependent on these numbers */
2689 case lowest_latency:
2693 new_itr = 20000; /* aka hwitr = ~200 */
2703 if (new_itr != adapter->itr) {
2704 /* this attempts to bias the interrupt rate towards Bulk
2705 * by adding intermediate steps when interrupt rate is
2707 new_itr = new_itr > adapter->itr ?
2708 min(adapter->itr + (new_itr >> 2), new_itr) :
2710 adapter->itr = new_itr;
2711 ew32(ITR, 1000000000 / (new_itr * 256));
2715 #define E1000_TX_FLAGS_CSUM 0x00000001
2716 #define E1000_TX_FLAGS_VLAN 0x00000002
2717 #define E1000_TX_FLAGS_TSO 0x00000004
2718 #define E1000_TX_FLAGS_IPV4 0x00000008
2719 #define E1000_TX_FLAGS_NO_FCS 0x00000010
2720 #define E1000_TX_FLAGS_VLAN_MASK 0xffff0000
2721 #define E1000_TX_FLAGS_VLAN_SHIFT 16
2723 static int e1000_tso(struct e1000_adapter *adapter,
2724 struct e1000_tx_ring *tx_ring, struct sk_buff *skb)
2726 struct e1000_context_desc *context_desc;
2727 struct e1000_buffer *buffer_info;
2730 u16 ipcse = 0, tucse, mss;
2731 u8 ipcss, ipcso, tucss, tucso, hdr_len;
2734 if (skb_is_gso(skb)) {
2735 if (skb_header_cloned(skb)) {
2736 err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC);
2741 hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb);
2742 mss = skb_shinfo(skb)->gso_size;
2743 if (skb->protocol == htons(ETH_P_IP)) {
2744 struct iphdr *iph = ip_hdr(skb);
2747 tcp_hdr(skb)->check = ~csum_tcpudp_magic(iph->saddr,
2751 cmd_length = E1000_TXD_CMD_IP;
2752 ipcse = skb_transport_offset(skb) - 1;
2753 } else if (skb->protocol == htons(ETH_P_IPV6)) {
2754 ipv6_hdr(skb)->payload_len = 0;
2755 tcp_hdr(skb)->check =
2756 ~csum_ipv6_magic(&ipv6_hdr(skb)->saddr,
2757 &ipv6_hdr(skb)->daddr,
2761 ipcss = skb_network_offset(skb);
2762 ipcso = (void *)&(ip_hdr(skb)->check) - (void *)skb->data;
2763 tucss = skb_transport_offset(skb);
2764 tucso = (void *)&(tcp_hdr(skb)->check) - (void *)skb->data;
2767 cmd_length |= (E1000_TXD_CMD_DEXT | E1000_TXD_CMD_TSE |
2768 E1000_TXD_CMD_TCP | (skb->len - (hdr_len)));
2770 i = tx_ring->next_to_use;
2771 context_desc = E1000_CONTEXT_DESC(*tx_ring, i);
2772 buffer_info = &tx_ring->buffer_info[i];
2774 context_desc->lower_setup.ip_fields.ipcss = ipcss;
2775 context_desc->lower_setup.ip_fields.ipcso = ipcso;
2776 context_desc->lower_setup.ip_fields.ipcse = cpu_to_le16(ipcse);
2777 context_desc->upper_setup.tcp_fields.tucss = tucss;
2778 context_desc->upper_setup.tcp_fields.tucso = tucso;
2779 context_desc->upper_setup.tcp_fields.tucse = cpu_to_le16(tucse);
2780 context_desc->tcp_seg_setup.fields.mss = cpu_to_le16(mss);
2781 context_desc->tcp_seg_setup.fields.hdr_len = hdr_len;
2782 context_desc->cmd_and_length = cpu_to_le32(cmd_length);
2784 buffer_info->time_stamp = jiffies;
2785 buffer_info->next_to_watch = i;
2787 if (++i == tx_ring->count) i = 0;
2788 tx_ring->next_to_use = i;
2795 static bool e1000_tx_csum(struct e1000_adapter *adapter,
2796 struct e1000_tx_ring *tx_ring, struct sk_buff *skb)
2798 struct e1000_context_desc *context_desc;
2799 struct e1000_buffer *buffer_info;
2802 u32 cmd_len = E1000_TXD_CMD_DEXT;
2804 if (skb->ip_summed != CHECKSUM_PARTIAL)
2807 switch (skb->protocol) {
2808 case cpu_to_be16(ETH_P_IP):
2809 if (ip_hdr(skb)->protocol == IPPROTO_TCP)
2810 cmd_len |= E1000_TXD_CMD_TCP;
2812 case cpu_to_be16(ETH_P_IPV6):
2813 /* XXX not handling all IPV6 headers */
2814 if (ipv6_hdr(skb)->nexthdr == IPPROTO_TCP)
2815 cmd_len |= E1000_TXD_CMD_TCP;
2818 if (unlikely(net_ratelimit()))
2819 e_warn(drv, "checksum_partial proto=%x!\n",
2824 css = skb_checksum_start_offset(skb);
2826 i = tx_ring->next_to_use;
2827 buffer_info = &tx_ring->buffer_info[i];
2828 context_desc = E1000_CONTEXT_DESC(*tx_ring, i);
2830 context_desc->lower_setup.ip_config = 0;
2831 context_desc->upper_setup.tcp_fields.tucss = css;
2832 context_desc->upper_setup.tcp_fields.tucso =
2833 css + skb->csum_offset;
2834 context_desc->upper_setup.tcp_fields.tucse = 0;
2835 context_desc->tcp_seg_setup.data = 0;
2836 context_desc->cmd_and_length = cpu_to_le32(cmd_len);
2838 buffer_info->time_stamp = jiffies;
2839 buffer_info->next_to_watch = i;
2841 if (unlikely(++i == tx_ring->count)) i = 0;
2842 tx_ring->next_to_use = i;
2847 #define E1000_MAX_TXD_PWR 12
2848 #define E1000_MAX_DATA_PER_TXD (1<<E1000_MAX_TXD_PWR)
2850 static int e1000_tx_map(struct e1000_adapter *adapter,
2851 struct e1000_tx_ring *tx_ring,
2852 struct sk_buff *skb, unsigned int first,
2853 unsigned int max_per_txd, unsigned int nr_frags,
2856 struct e1000_hw *hw = &adapter->hw;
2857 struct pci_dev *pdev = adapter->pdev;
2858 struct e1000_buffer *buffer_info;
2859 unsigned int len = skb_headlen(skb);
2860 unsigned int offset = 0, size, count = 0, i;
2861 unsigned int f, bytecount, segs;
2863 i = tx_ring->next_to_use;
2866 buffer_info = &tx_ring->buffer_info[i];
2867 size = min(len, max_per_txd);
2868 /* Workaround for Controller erratum --
2869 * descriptor for non-tso packet in a linear SKB that follows a
2870 * tso gets written back prematurely before the data is fully
2871 * DMA'd to the controller */
2872 if (!skb->data_len && tx_ring->last_tx_tso &&
2874 tx_ring->last_tx_tso = false;
2878 /* Workaround for premature desc write-backs
2879 * in TSO mode. Append 4-byte sentinel desc */
2880 if (unlikely(mss && !nr_frags && size == len && size > 8))
2882 /* work-around for errata 10 and it applies
2883 * to all controllers in PCI-X mode
2884 * The fix is to make sure that the first descriptor of a
2885 * packet is smaller than 2048 - 16 - 16 (or 2016) bytes
2887 if (unlikely((hw->bus_type == e1000_bus_type_pcix) &&
2888 (size > 2015) && count == 0))
2891 /* Workaround for potential 82544 hang in PCI-X. Avoid
2892 * terminating buffers within evenly-aligned dwords. */
2893 if (unlikely(adapter->pcix_82544 &&
2894 !((unsigned long)(skb->data + offset + size - 1) & 4) &&
2898 buffer_info->length = size;
2899 /* set time_stamp *before* dma to help avoid a possible race */
2900 buffer_info->time_stamp = jiffies;
2901 buffer_info->mapped_as_page = false;
2902 buffer_info->dma = dma_map_single(&pdev->dev,
2904 size, DMA_TO_DEVICE);
2905 if (dma_mapping_error(&pdev->dev, buffer_info->dma))
2907 buffer_info->next_to_watch = i;
2914 if (unlikely(i == tx_ring->count))
2919 for (f = 0; f < nr_frags; f++) {
2920 const struct skb_frag_struct *frag;
2922 frag = &skb_shinfo(skb)->frags[f];
2923 len = skb_frag_size(frag);
2927 unsigned long bufend;
2929 if (unlikely(i == tx_ring->count))
2932 buffer_info = &tx_ring->buffer_info[i];
2933 size = min(len, max_per_txd);
2934 /* Workaround for premature desc write-backs
2935 * in TSO mode. Append 4-byte sentinel desc */
2936 if (unlikely(mss && f == (nr_frags-1) && size == len && size > 8))
2938 /* Workaround for potential 82544 hang in PCI-X.
2939 * Avoid terminating buffers within evenly-aligned
2941 bufend = (unsigned long)
2942 page_to_phys(skb_frag_page(frag));
2943 bufend += offset + size - 1;
2944 if (unlikely(adapter->pcix_82544 &&
2949 buffer_info->length = size;
2950 buffer_info->time_stamp = jiffies;
2951 buffer_info->mapped_as_page = true;
2952 buffer_info->dma = skb_frag_dma_map(&pdev->dev, frag,
2953 offset, size, DMA_TO_DEVICE);
2954 if (dma_mapping_error(&pdev->dev, buffer_info->dma))
2956 buffer_info->next_to_watch = i;
2964 segs = skb_shinfo(skb)->gso_segs ?: 1;
2965 /* multiply data chunks by size of headers */
2966 bytecount = ((segs - 1) * skb_headlen(skb)) + skb->len;
2968 tx_ring->buffer_info[i].skb = skb;
2969 tx_ring->buffer_info[i].segs = segs;
2970 tx_ring->buffer_info[i].bytecount = bytecount;
2971 tx_ring->buffer_info[first].next_to_watch = i;
2976 dev_err(&pdev->dev, "TX DMA map failed\n");
2977 buffer_info->dma = 0;
2983 i += tx_ring->count;
2985 buffer_info = &tx_ring->buffer_info[i];
2986 e1000_unmap_and_free_tx_resource(adapter, buffer_info);
2992 static void e1000_tx_queue(struct e1000_adapter *adapter,
2993 struct e1000_tx_ring *tx_ring, int tx_flags,
2996 struct e1000_hw *hw = &adapter->hw;
2997 struct e1000_tx_desc *tx_desc = NULL;
2998 struct e1000_buffer *buffer_info;
2999 u32 txd_upper = 0, txd_lower = E1000_TXD_CMD_IFCS;
3002 if (likely(tx_flags & E1000_TX_FLAGS_TSO)) {
3003 txd_lower |= E1000_TXD_CMD_DEXT | E1000_TXD_DTYP_D |
3005 txd_upper |= E1000_TXD_POPTS_TXSM << 8;
3007 if (likely(tx_flags & E1000_TX_FLAGS_IPV4))
3008 txd_upper |= E1000_TXD_POPTS_IXSM << 8;
3011 if (likely(tx_flags & E1000_TX_FLAGS_CSUM)) {
3012 txd_lower |= E1000_TXD_CMD_DEXT | E1000_TXD_DTYP_D;
3013 txd_upper |= E1000_TXD_POPTS_TXSM << 8;
3016 if (unlikely(tx_flags & E1000_TX_FLAGS_VLAN)) {
3017 txd_lower |= E1000_TXD_CMD_VLE;
3018 txd_upper |= (tx_flags & E1000_TX_FLAGS_VLAN_MASK);
3021 if (unlikely(tx_flags & E1000_TX_FLAGS_NO_FCS))
3022 txd_lower &= ~(E1000_TXD_CMD_IFCS);
3024 i = tx_ring->next_to_use;
3027 buffer_info = &tx_ring->buffer_info[i];
3028 tx_desc = E1000_TX_DESC(*tx_ring, i);
3029 tx_desc->buffer_addr = cpu_to_le64(buffer_info->dma);
3030 tx_desc->lower.data =
3031 cpu_to_le32(txd_lower | buffer_info->length);
3032 tx_desc->upper.data = cpu_to_le32(txd_upper);
3033 if (unlikely(++i == tx_ring->count)) i = 0;
3036 tx_desc->lower.data |= cpu_to_le32(adapter->txd_cmd);
3038 /* txd_cmd re-enables FCS, so we'll re-disable it here as desired. */
3039 if (unlikely(tx_flags & E1000_TX_FLAGS_NO_FCS))
3040 tx_desc->lower.data &= ~(cpu_to_le32(E1000_TXD_CMD_IFCS));
3042 /* Force memory writes to complete before letting h/w
3043 * know there are new descriptors to fetch. (Only
3044 * applicable for weak-ordered memory model archs,
3045 * such as IA-64). */
3048 tx_ring->next_to_use = i;
3049 writel(i, hw->hw_addr + tx_ring->tdt);
3050 /* we need this if more than one processor can write to our tail
3051 * at a time, it syncronizes IO on IA64/Altix systems */
3056 * 82547 workaround to avoid controller hang in half-duplex environment.
3057 * The workaround is to avoid queuing a large packet that would span
3058 * the internal Tx FIFO ring boundary by notifying the stack to resend
3059 * the packet at a later time. This gives the Tx FIFO an opportunity to
3060 * flush all packets. When that occurs, we reset the Tx FIFO pointers
3061 * to the beginning of the Tx FIFO.
3064 #define E1000_FIFO_HDR 0x10
3065 #define E1000_82547_PAD_LEN 0x3E0
3067 static int e1000_82547_fifo_workaround(struct e1000_adapter *adapter,
3068 struct sk_buff *skb)
3070 u32 fifo_space = adapter->tx_fifo_size - adapter->tx_fifo_head;
3071 u32 skb_fifo_len = skb->len + E1000_FIFO_HDR;
3073 skb_fifo_len = ALIGN(skb_fifo_len, E1000_FIFO_HDR);
3075 if (adapter->link_duplex != HALF_DUPLEX)
3076 goto no_fifo_stall_required;
3078 if (atomic_read(&adapter->tx_fifo_stall))
3081 if (skb_fifo_len >= (E1000_82547_PAD_LEN + fifo_space)) {
3082 atomic_set(&adapter->tx_fifo_stall, 1);
3086 no_fifo_stall_required:
3087 adapter->tx_fifo_head += skb_fifo_len;
3088 if (adapter->tx_fifo_head >= adapter->tx_fifo_size)
3089 adapter->tx_fifo_head -= adapter->tx_fifo_size;
3093 static int __e1000_maybe_stop_tx(struct net_device *netdev, int size)
3095 struct e1000_adapter *adapter = netdev_priv(netdev);
3096 struct e1000_tx_ring *tx_ring = adapter->tx_ring;
3098 netif_stop_queue(netdev);
3099 /* Herbert's original patch had:
3100 * smp_mb__after_netif_stop_queue();
3101 * but since that doesn't exist yet, just open code it. */
3104 /* We need to check again in a case another CPU has just
3105 * made room available. */
3106 if (likely(E1000_DESC_UNUSED(tx_ring) < size))
3110 netif_start_queue(netdev);
3111 ++adapter->restart_queue;
3115 static int e1000_maybe_stop_tx(struct net_device *netdev,
3116 struct e1000_tx_ring *tx_ring, int size)
3118 if (likely(E1000_DESC_UNUSED(tx_ring) >= size))
3120 return __e1000_maybe_stop_tx(netdev, size);
3123 #define TXD_USE_COUNT(S, X) (((S) >> (X)) + 1 )
3124 static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb,
3125 struct net_device *netdev)
3127 struct e1000_adapter *adapter = netdev_priv(netdev);
3128 struct e1000_hw *hw = &adapter->hw;
3129 struct e1000_tx_ring *tx_ring;
3130 unsigned int first, max_per_txd = E1000_MAX_DATA_PER_TXD;
3131 unsigned int max_txd_pwr = E1000_MAX_TXD_PWR;
3132 unsigned int tx_flags = 0;
3133 unsigned int len = skb_headlen(skb);
3134 unsigned int nr_frags;
3140 /* This goes back to the question of how to logically map a tx queue
3141 * to a flow. Right now, performance is impacted slightly negatively
3142 * if using multiple tx queues. If the stack breaks away from a
3143 * single qdisc implementation, we can look at this again. */
3144 tx_ring = adapter->tx_ring;
3146 if (unlikely(skb->len <= 0)) {
3147 dev_kfree_skb_any(skb);
3148 return NETDEV_TX_OK;
3151 mss = skb_shinfo(skb)->gso_size;
3152 /* The controller does a simple calculation to
3153 * make sure there is enough room in the FIFO before
3154 * initiating the DMA for each buffer. The calc is:
3155 * 4 = ceil(buffer len/mss). To make sure we don't
3156 * overrun the FIFO, adjust the max buffer len if mss
3160 max_per_txd = min(mss << 2, max_per_txd);
3161 max_txd_pwr = fls(max_per_txd) - 1;
3163 hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb);
3164 if (skb->data_len && hdr_len == len) {
3165 switch (hw->mac_type) {
3166 unsigned int pull_size;
3168 /* Make sure we have room to chop off 4 bytes,
3169 * and that the end alignment will work out to
3170 * this hardware's requirements
3171 * NOTE: this is a TSO only workaround
3172 * if end byte alignment not correct move us
3173 * into the next dword */
3174 if ((unsigned long)(skb_tail_pointer(skb) - 1) & 4)
3177 pull_size = min((unsigned int)4, skb->data_len);
3178 if (!__pskb_pull_tail(skb, pull_size)) {
3179 e_err(drv, "__pskb_pull_tail "
3181 dev_kfree_skb_any(skb);
3182 return NETDEV_TX_OK;
3184 len = skb_headlen(skb);
3193 /* reserve a descriptor for the offload context */
3194 if ((mss) || (skb->ip_summed == CHECKSUM_PARTIAL))
3198 /* Controller Erratum workaround */
3199 if (!skb->data_len && tx_ring->last_tx_tso && !skb_is_gso(skb))
3202 count += TXD_USE_COUNT(len, max_txd_pwr);
3204 if (adapter->pcix_82544)
3207 /* work-around for errata 10 and it applies to all controllers
3208 * in PCI-X mode, so add one more descriptor to the count
3210 if (unlikely((hw->bus_type == e1000_bus_type_pcix) &&
3214 nr_frags = skb_shinfo(skb)->nr_frags;
3215 for (f = 0; f < nr_frags; f++)
3216 count += TXD_USE_COUNT(skb_frag_size(&skb_shinfo(skb)->frags[f]),
3218 if (adapter->pcix_82544)
3221 /* need: count + 2 desc gap to keep tail from touching
3222 * head, otherwise try next time */
3223 if (unlikely(e1000_maybe_stop_tx(netdev, tx_ring, count + 2)))
3224 return NETDEV_TX_BUSY;
3226 if (unlikely((hw->mac_type == e1000_82547) &&
3227 (e1000_82547_fifo_workaround(adapter, skb)))) {
3228 netif_stop_queue(netdev);
3229 if (!test_bit(__E1000_DOWN, &adapter->flags))
3230 schedule_delayed_work(&adapter->fifo_stall_task, 1);
3231 return NETDEV_TX_BUSY;
3234 if (vlan_tx_tag_present(skb)) {
3235 tx_flags |= E1000_TX_FLAGS_VLAN;
3236 tx_flags |= (vlan_tx_tag_get(skb) << E1000_TX_FLAGS_VLAN_SHIFT);
3239 first = tx_ring->next_to_use;
3241 tso = e1000_tso(adapter, tx_ring, skb);
3243 dev_kfree_skb_any(skb);
3244 return NETDEV_TX_OK;
3248 if (likely(hw->mac_type != e1000_82544))
3249 tx_ring->last_tx_tso = true;
3250 tx_flags |= E1000_TX_FLAGS_TSO;
3251 } else if (likely(e1000_tx_csum(adapter, tx_ring, skb)))
3252 tx_flags |= E1000_TX_FLAGS_CSUM;
3254 if (likely(skb->protocol == htons(ETH_P_IP)))
3255 tx_flags |= E1000_TX_FLAGS_IPV4;
3257 if (unlikely(skb->no_fcs))
3258 tx_flags |= E1000_TX_FLAGS_NO_FCS;
3260 count = e1000_tx_map(adapter, tx_ring, skb, first, max_per_txd,
3264 skb_tx_timestamp(skb);
3266 e1000_tx_queue(adapter, tx_ring, tx_flags, count);
3267 /* Make sure there is space in the ring for the next send. */
3268 e1000_maybe_stop_tx(netdev, tx_ring, MAX_SKB_FRAGS + 2);
3271 dev_kfree_skb_any(skb);
3272 tx_ring->buffer_info[first].time_stamp = 0;
3273 tx_ring->next_to_use = first;
3276 return NETDEV_TX_OK;
3279 #define NUM_REGS 38 /* 1 based count */
3280 static void e1000_regdump(struct e1000_adapter *adapter)
3282 struct e1000_hw *hw = &adapter->hw;
3284 u32 *regs_buff = regs;
3287 static const char * const reg_name[] = {
3289 "RCTL", "RDLEN", "RDH", "RDT", "RDTR",
3290 "TCTL", "TDBAL", "TDBAH", "TDLEN", "TDH", "TDT",
3291 "TIDV", "TXDCTL", "TADV", "TARC0",
3292 "TDBAL1", "TDBAH1", "TDLEN1", "TDH1", "TDT1",
3294 "CTRL_EXT", "ERT", "RDBAL", "RDBAH",
3295 "TDFH", "TDFT", "TDFHS", "TDFTS", "TDFPC",
3296 "RDFH", "RDFT", "RDFHS", "RDFTS", "RDFPC"
3299 regs_buff[0] = er32(CTRL);
3300 regs_buff[1] = er32(STATUS);
3302 regs_buff[2] = er32(RCTL);
3303 regs_buff[3] = er32(RDLEN);
3304 regs_buff[4] = er32(RDH);
3305 regs_buff[5] = er32(RDT);
3306 regs_buff[6] = er32(RDTR);
3308 regs_buff[7] = er32(TCTL);
3309 regs_buff[8] = er32(TDBAL);
3310 regs_buff[9] = er32(TDBAH);
3311 regs_buff[10] = er32(TDLEN);
3312 regs_buff[11] = er32(TDH);
3313 regs_buff[12] = er32(TDT);
3314 regs_buff[13] = er32(TIDV);
3315 regs_buff[14] = er32(TXDCTL);
3316 regs_buff[15] = er32(TADV);
3317 regs_buff[16] = er32(TARC0);
3319 regs_buff[17] = er32(TDBAL1);
3320 regs_buff[18] = er32(TDBAH1);
3321 regs_buff[19] = er32(TDLEN1);
3322 regs_buff[20] = er32(TDH1);
3323 regs_buff[21] = er32(TDT1);
3324 regs_buff[22] = er32(TXDCTL1);
3325 regs_buff[23] = er32(TARC1);
3326 regs_buff[24] = er32(CTRL_EXT);
3327 regs_buff[25] = er32(ERT);
3328 regs_buff[26] = er32(RDBAL0);
3329 regs_buff[27] = er32(RDBAH0);
3330 regs_buff[28] = er32(TDFH);
3331 regs_buff[29] = er32(TDFT);
3332 regs_buff[30] = er32(TDFHS);
3333 regs_buff[31] = er32(TDFTS);
3334 regs_buff[32] = er32(TDFPC);
3335 regs_buff[33] = er32(RDFH);
3336 regs_buff[34] = er32(RDFT);
3337 regs_buff[35] = er32(RDFHS);
3338 regs_buff[36] = er32(RDFTS);
3339 regs_buff[37] = er32(RDFPC);
3341 pr_info("Register dump\n");
3342 for (i = 0; i < NUM_REGS; i++)
3343 pr_info("%-15s %08x\n", reg_name[i], regs_buff[i]);
3347 * e1000_dump: Print registers, tx ring and rx ring
3349 static void e1000_dump(struct e1000_adapter *adapter)
3351 /* this code doesn't handle multiple rings */
3352 struct e1000_tx_ring *tx_ring = adapter->tx_ring;
3353 struct e1000_rx_ring *rx_ring = adapter->rx_ring;
3356 if (!netif_msg_hw(adapter))
3359 /* Print Registers */
3360 e1000_regdump(adapter);
3365 pr_info("TX Desc ring0 dump\n");
3367 /* Transmit Descriptor Formats - DEXT[29] is 0 (Legacy) or 1 (Extended)
3369 * Legacy Transmit Descriptor
3370 * +--------------------------------------------------------------+
3371 * 0 | Buffer Address [63:0] (Reserved on Write Back) |
3372 * +--------------------------------------------------------------+
3373 * 8 | Special | CSS | Status | CMD | CSO | Length |
3374 * +--------------------------------------------------------------+
3375 * 63 48 47 36 35 32 31 24 23 16 15 0
3377 * Extended Context Descriptor (DTYP=0x0) for TSO or checksum offload
3378 * 63 48 47 40 39 32 31 16 15 8 7 0
3379 * +----------------------------------------------------------------+
3380 * 0 | TUCSE | TUCS0 | TUCSS | IPCSE | IPCS0 | IPCSS |
3381 * +----------------------------------------------------------------+
3382 * 8 | MSS | HDRLEN | RSV | STA | TUCMD | DTYP | PAYLEN |
3383 * +----------------------------------------------------------------+
3384 * 63 48 47 40 39 36 35 32 31 24 23 20 19 0
3386 * Extended Data Descriptor (DTYP=0x1)
3387 * +----------------------------------------------------------------+
3388 * 0 | Buffer Address [63:0] |
3389 * +----------------------------------------------------------------+
3390 * 8 | VLAN tag | POPTS | Rsvd | Status | Command | DTYP | DTALEN |
3391 * +----------------------------------------------------------------+
3392 * 63 48 47 40 39 36 35 32 31 24 23 20 19 0
3394 pr_info("Tc[desc] [Ce CoCsIpceCoS] [MssHlRSCm0Plen] [bi->dma ] leng ntw timestmp bi->skb\n");
3395 pr_info("Td[desc] [address 63:0 ] [VlaPoRSCm1Dlen] [bi->dma ] leng ntw timestmp bi->skb\n");
3397 if (!netif_msg_tx_done(adapter))
3398 goto rx_ring_summary;
3400 for (i = 0; tx_ring->desc && (i < tx_ring->count); i++) {
3401 struct e1000_tx_desc *tx_desc = E1000_TX_DESC(*tx_ring, i);
3402 struct e1000_buffer *buffer_info = &tx_ring->buffer_info[i];
3403 struct my_u { u64 a; u64 b; };
3404 struct my_u *u = (struct my_u *)tx_desc;
3407 if (i == tx_ring->next_to_use && i == tx_ring->next_to_clean)
3409 else if (i == tx_ring->next_to_use)
3411 else if (i == tx_ring->next_to_clean)
3416 pr_info("T%c[0x%03X] %016llX %016llX %016llX %04X %3X %016llX %p %s\n",
3417 ((le64_to_cpu(u->b) & (1<<20)) ? 'd' : 'c'), i,
3418 le64_to_cpu(u->a), le64_to_cpu(u->b),
3419 (u64)buffer_info->dma, buffer_info->length,
3420 buffer_info->next_to_watch,
3421 (u64)buffer_info->time_stamp, buffer_info->skb, type);
3428 pr_info("\nRX Desc ring dump\n");
3430 /* Legacy Receive Descriptor Format
3432 * +-----------------------------------------------------+
3433 * | Buffer Address [63:0] |
3434 * +-----------------------------------------------------+
3435 * | VLAN Tag | Errors | Status 0 | Packet csum | Length |
3436 * +-----------------------------------------------------+
3437 * 63 48 47 40 39 32 31 16 15 0
3439 pr_info("R[desc] [address 63:0 ] [vl er S cks ln] [bi->dma ] [bi->skb]\n");
3441 if (!netif_msg_rx_status(adapter))
3444 for (i = 0; rx_ring->desc && (i < rx_ring->count); i++) {
3445 struct e1000_rx_desc *rx_desc = E1000_RX_DESC(*rx_ring, i);
3446 struct e1000_buffer *buffer_info = &rx_ring->buffer_info[i];
3447 struct my_u { u64 a; u64 b; };
3448 struct my_u *u = (struct my_u *)rx_desc;
3451 if (i == rx_ring->next_to_use)
3453 else if (i == rx_ring->next_to_clean)
3458 pr_info("R[0x%03X] %016llX %016llX %016llX %p %s\n",
3459 i, le64_to_cpu(u->a), le64_to_cpu(u->b),
3460 (u64)buffer_info->dma, buffer_info->skb, type);
3463 /* dump the descriptor caches */
3465 pr_info("Rx descriptor cache in 64bit format\n");
3466 for (i = 0x6000; i <= 0x63FF ; i += 0x10) {
3467 pr_info("R%04X: %08X|%08X %08X|%08X\n",
3469 readl(adapter->hw.hw_addr + i+4),
3470 readl(adapter->hw.hw_addr + i),
3471 readl(adapter->hw.hw_addr + i+12),
3472 readl(adapter->hw.hw_addr + i+8));
3475 pr_info("Tx descriptor cache in 64bit format\n");
3476 for (i = 0x7000; i <= 0x73FF ; i += 0x10) {
3477 pr_info("T%04X: %08X|%08X %08X|%08X\n",
3479 readl(adapter->hw.hw_addr + i+4),
3480 readl(adapter->hw.hw_addr + i),
3481 readl(adapter->hw.hw_addr + i+12),
3482 readl(adapter->hw.hw_addr + i+8));
3489 * e1000_tx_timeout - Respond to a Tx Hang
3490 * @netdev: network interface device structure
3493 static void e1000_tx_timeout(struct net_device *netdev)
3495 struct e1000_adapter *adapter = netdev_priv(netdev);
3497 /* Do the reset outside of interrupt context */
3498 adapter->tx_timeout_count++;
3499 schedule_work(&adapter->reset_task);
3502 static void e1000_reset_task(struct work_struct *work)
3504 struct e1000_adapter *adapter =
3505 container_of(work, struct e1000_adapter, reset_task);
3507 if (test_bit(__E1000_DOWN, &adapter->flags))
3509 e_err(drv, "Reset adapter\n");
3510 e1000_reinit_safe(adapter);
3514 * e1000_get_stats - Get System Network Statistics
3515 * @netdev: network interface device structure
3517 * Returns the address of the device statistics structure.
3518 * The statistics are actually updated from the watchdog.
3521 static struct net_device_stats *e1000_get_stats(struct net_device *netdev)
3523 /* only return the current stats */
3524 return &netdev->stats;
3528 * e1000_change_mtu - Change the Maximum Transfer Unit
3529 * @netdev: network interface device structure
3530 * @new_mtu: new value for maximum frame size
3532 * Returns 0 on success, negative on failure
3535 static int e1000_change_mtu(struct net_device *netdev, int new_mtu)
3537 struct e1000_adapter *adapter = netdev_priv(netdev);
3538 struct e1000_hw *hw = &adapter->hw;
3539 int max_frame = new_mtu + ENET_HEADER_SIZE + ETHERNET_FCS_SIZE;
3541 if ((max_frame < MINIMUM_ETHERNET_FRAME_SIZE) ||
3542 (max_frame > MAX_JUMBO_FRAME_SIZE)) {
3543 e_err(probe, "Invalid MTU setting\n");
3547 /* Adapter-specific max frame size limits. */
3548 switch (hw->mac_type) {
3549 case e1000_undefined ... e1000_82542_rev2_1:
3550 if (max_frame > (ETH_FRAME_LEN + ETH_FCS_LEN)) {
3551 e_err(probe, "Jumbo Frames not supported.\n");
3556 /* Capable of supporting up to MAX_JUMBO_FRAME_SIZE limit. */
3560 while (test_and_set_bit(__E1000_RESETTING, &adapter->flags))
3562 /* e1000_down has a dependency on max_frame_size */
3563 hw->max_frame_size = max_frame;
3564 if (netif_running(netdev))
3565 e1000_down(adapter);
3567 /* NOTE: netdev_alloc_skb reserves 16 bytes, and typically NET_IP_ALIGN
3568 * means we reserve 2 more, this pushes us to allocate from the next
3570 * i.e. RXBUFFER_2048 --> size-4096 slab
3571 * however with the new *_jumbo_rx* routines, jumbo receives will use
3572 * fragmented skbs */
3574 if (max_frame <= E1000_RXBUFFER_2048)
3575 adapter->rx_buffer_len = E1000_RXBUFFER_2048;
3577 #if (PAGE_SIZE >= E1000_RXBUFFER_16384)
3578 adapter->rx_buffer_len = E1000_RXBUFFER_16384;
3579 #elif (PAGE_SIZE >= E1000_RXBUFFER_4096)
3580 adapter->rx_buffer_len = PAGE_SIZE;
3583 /* adjust allocation if LPE protects us, and we aren't using SBP */
3584 if (!hw->tbi_compatibility_on &&
3585 ((max_frame == (ETH_FRAME_LEN + ETH_FCS_LEN)) ||
3586 (max_frame == MAXIMUM_ETHERNET_VLAN_SIZE)))
3587 adapter->rx_buffer_len = MAXIMUM_ETHERNET_VLAN_SIZE;
3589 pr_info("%s changing MTU from %d to %d\n",
3590 netdev->name, netdev->mtu, new_mtu);
3591 netdev->mtu = new_mtu;
3593 if (netif_running(netdev))
3596 e1000_reset(adapter);
3598 clear_bit(__E1000_RESETTING, &adapter->flags);
3604 * e1000_update_stats - Update the board statistics counters
3605 * @adapter: board private structure
3608 void e1000_update_stats(struct e1000_adapter *adapter)
3610 struct net_device *netdev = adapter->netdev;
3611 struct e1000_hw *hw = &adapter->hw;
3612 struct pci_dev *pdev = adapter->pdev;
3613 unsigned long flags;
3616 #define PHY_IDLE_ERROR_COUNT_MASK 0x00FF
3619 * Prevent stats update while adapter is being reset, or if the pci
3620 * connection is down.
3622 if (adapter->link_speed == 0)
3624 if (pci_channel_offline(pdev))
3627 spin_lock_irqsave(&adapter->stats_lock, flags);
3629 /* these counters are modified from e1000_tbi_adjust_stats,
3630 * called from the interrupt context, so they must only
3631 * be written while holding adapter->stats_lock
3634 adapter->stats.crcerrs += er32(CRCERRS);
3635 adapter->stats.gprc += er32(GPRC);
3636 adapter->stats.gorcl += er32(GORCL);
3637 adapter->stats.gorch += er32(GORCH);
3638 adapter->stats.bprc += er32(BPRC);
3639 adapter->stats.mprc += er32(MPRC);
3640 adapter->stats.roc += er32(ROC);
3642 adapter->stats.prc64 += er32(PRC64);
3643 adapter->stats.prc127 += er32(PRC127);
3644 adapter->stats.prc255 += er32(PRC255);
3645 adapter->stats.prc511 += er32(PRC511);
3646 adapter->stats.prc1023 += er32(PRC1023);
3647 adapter->stats.prc1522 += er32(PRC1522);
3649 adapter->stats.symerrs += er32(SYMERRS);
3650 adapter->stats.mpc += er32(MPC);
3651 adapter->stats.scc += er32(SCC);
3652 adapter->stats.ecol += er32(ECOL);
3653 adapter->stats.mcc += er32(MCC);
3654 adapter->stats.latecol += er32(LATECOL);
3655 adapter->stats.dc += er32(DC);
3656 adapter->stats.sec += er32(SEC);
3657 adapter->stats.rlec += er32(RLEC);
3658 adapter->stats.xonrxc += er32(XONRXC);
3659 adapter->stats.xontxc += er32(XONTXC);
3660 adapter->stats.xoffrxc += er32(XOFFRXC);
3661 adapter->stats.xofftxc += er32(XOFFTXC);
3662 adapter->stats.fcruc += er32(FCRUC);
3663 adapter->stats.gptc += er32(GPTC);
3664 adapter->stats.gotcl += er32(GOTCL);
3665 adapter->stats.gotch += er32(GOTCH);
3666 adapter->stats.rnbc += er32(RNBC);
3667 adapter->stats.ruc += er32(RUC);
3668 adapter->stats.rfc += er32(RFC);
3669 adapter->stats.rjc += er32(RJC);
3670 adapter->stats.torl += er32(TORL);
3671 adapter->stats.torh += er32(TORH);
3672 adapter->stats.totl += er32(TOTL);
3673 adapter->stats.toth += er32(TOTH);
3674 adapter->stats.tpr += er32(TPR);
3676 adapter->stats.ptc64 += er32(PTC64);
3677 adapter->stats.ptc127 += er32(PTC127);
3678 adapter->stats.ptc255 += er32(PTC255);
3679 adapter->stats.ptc511 += er32(PTC511);
3680 adapter->stats.ptc1023 += er32(PTC1023);
3681 adapter->stats.ptc1522 += er32(PTC1522);
3683 adapter->stats.mptc += er32(MPTC);
3684 adapter->stats.bptc += er32(BPTC);
3686 /* used for adaptive IFS */
3688 hw->tx_packet_delta = er32(TPT);
3689 adapter->stats.tpt += hw->tx_packet_delta;
3690 hw->collision_delta = er32(COLC);
3691 adapter->stats.colc += hw->collision_delta;
3693 if (hw->mac_type >= e1000_82543) {
3694 adapter->stats.algnerrc += er32(ALGNERRC);
3695 adapter->stats.rxerrc += er32(RXERRC);
3696 adapter->stats.tncrs += er32(TNCRS);
3697 adapter->stats.cexterr += er32(CEXTERR);
3698 adapter->stats.tsctc += er32(TSCTC);
3699 adapter->stats.tsctfc += er32(TSCTFC);
3702 /* Fill out the OS statistics structure */
3703 netdev->stats.multicast = adapter->stats.mprc;
3704 netdev->stats.collisions = adapter->stats.colc;
3708 /* RLEC on some newer hardware can be incorrect so build
3709 * our own version based on RUC and ROC */
3710 netdev->stats.rx_errors = adapter->stats.rxerrc +
3711 adapter->stats.crcerrs + adapter->stats.algnerrc +
3712 adapter->stats.ruc + adapter->stats.roc +
3713 adapter->stats.cexterr;
3714 adapter->stats.rlerrc = adapter->stats.ruc + adapter->stats.roc;
3715 netdev->stats.rx_length_errors = adapter->stats.rlerrc;
3716 netdev->stats.rx_crc_errors = adapter->stats.crcerrs;
3717 netdev->stats.rx_frame_errors = adapter->stats.algnerrc;
3718 netdev->stats.rx_missed_errors = adapter->stats.mpc;
3721 adapter->stats.txerrc = adapter->stats.ecol + adapter->stats.latecol;
3722 netdev->stats.tx_errors = adapter->stats.txerrc;
3723 netdev->stats.tx_aborted_errors = adapter->stats.ecol;
3724 netdev->stats.tx_window_errors = adapter->stats.latecol;
3725 netdev->stats.tx_carrier_errors = adapter->stats.tncrs;
3726 if (hw->bad_tx_carr_stats_fd &&
3727 adapter->link_duplex == FULL_DUPLEX) {
3728 netdev->stats.tx_carrier_errors = 0;
3729 adapter->stats.tncrs = 0;
3732 /* Tx Dropped needs to be maintained elsewhere */
3735 if (hw->media_type == e1000_media_type_copper) {
3736 if ((adapter->link_speed == SPEED_1000) &&
3737 (!e1000_read_phy_reg(hw, PHY_1000T_STATUS, &phy_tmp))) {
3738 phy_tmp &= PHY_IDLE_ERROR_COUNT_MASK;
3739 adapter->phy_stats.idle_errors += phy_tmp;
3742 if ((hw->mac_type <= e1000_82546) &&
3743 (hw->phy_type == e1000_phy_m88) &&
3744 !e1000_read_phy_reg(hw, M88E1000_RX_ERR_CNTR, &phy_tmp))
3745 adapter->phy_stats.receive_errors += phy_tmp;
3748 /* Management Stats */
3749 if (hw->has_smbus) {
3750 adapter->stats.mgptc += er32(MGTPTC);
3751 adapter->stats.mgprc += er32(MGTPRC);
3752 adapter->stats.mgpdc += er32(MGTPDC);
3755 spin_unlock_irqrestore(&adapter->stats_lock, flags);
3759 * e1000_intr - Interrupt Handler
3760 * @irq: interrupt number
3761 * @data: pointer to a network interface device structure
3764 static irqreturn_t e1000_intr(int irq, void *data)
3766 struct net_device *netdev = data;
3767 struct e1000_adapter *adapter = netdev_priv(netdev);
3768 struct e1000_hw *hw = &adapter->hw;
3769 u32 icr = er32(ICR);
3771 if (unlikely((!icr)))
3772 return IRQ_NONE; /* Not our interrupt */
3775 * we might have caused the interrupt, but the above
3776 * read cleared it, and just in case the driver is
3777 * down there is nothing to do so return handled
3779 if (unlikely(test_bit(__E1000_DOWN, &adapter->flags)))
3782 if (unlikely(icr & (E1000_ICR_RXSEQ | E1000_ICR_LSC))) {
3783 hw->get_link_status = 1;
3784 /* guard against interrupt when we're going down */
3785 if (!test_bit(__E1000_DOWN, &adapter->flags))
3786 schedule_delayed_work(&adapter->watchdog_task, 1);
3789 /* disable interrupts, without the synchronize_irq bit */
3791 E1000_WRITE_FLUSH();
3793 if (likely(napi_schedule_prep(&adapter->napi))) {
3794 adapter->total_tx_bytes = 0;
3795 adapter->total_tx_packets = 0;
3796 adapter->total_rx_bytes = 0;
3797 adapter->total_rx_packets = 0;
3798 __napi_schedule(&adapter->napi);
3800 /* this really should not happen! if it does it is basically a
3801 * bug, but not a hard error, so enable ints and continue */
3802 if (!test_bit(__E1000_DOWN, &adapter->flags))
3803 e1000_irq_enable(adapter);
3810 * e1000_clean - NAPI Rx polling callback
3811 * @adapter: board private structure
3813 static int e1000_clean(struct napi_struct *napi, int budget)
3815 struct e1000_adapter *adapter = container_of(napi, struct e1000_adapter, napi);
3816 int tx_clean_complete = 0, work_done = 0;
3818 tx_clean_complete = e1000_clean_tx_irq(adapter, &adapter->tx_ring[0]);
3820 adapter->clean_rx(adapter, &adapter->rx_ring[0], &work_done, budget);
3822 if (!tx_clean_complete)
3825 /* If budget not fully consumed, exit the polling mode */
3826 if (work_done < budget) {
3827 if (likely(adapter->itr_setting & 3))
3828 e1000_set_itr(adapter);
3829 napi_complete(napi);
3830 if (!test_bit(__E1000_DOWN, &adapter->flags))
3831 e1000_irq_enable(adapter);
3838 * e1000_clean_tx_irq - Reclaim resources after transmit completes
3839 * @adapter: board private structure
3841 static bool e1000_clean_tx_irq(struct e1000_adapter *adapter,
3842 struct e1000_tx_ring *tx_ring)
3844 struct e1000_hw *hw = &adapter->hw;
3845 struct net_device *netdev = adapter->netdev;
3846 struct e1000_tx_desc *tx_desc, *eop_desc;
3847 struct e1000_buffer *buffer_info;
3848 unsigned int i, eop;
3849 unsigned int count = 0;
3850 unsigned int total_tx_bytes=0, total_tx_packets=0;
3852 i = tx_ring->next_to_clean;
3853 eop = tx_ring->buffer_info[i].next_to_watch;
3854 eop_desc = E1000_TX_DESC(*tx_ring, eop);
3856 while ((eop_desc->upper.data & cpu_to_le32(E1000_TXD_STAT_DD)) &&
3857 (count < tx_ring->count)) {
3858 bool cleaned = false;
3859 rmb(); /* read buffer_info after eop_desc */
3860 for ( ; !cleaned; count++) {
3861 tx_desc = E1000_TX_DESC(*tx_ring, i);
3862 buffer_info = &tx_ring->buffer_info[i];
3863 cleaned = (i == eop);
3866 total_tx_packets += buffer_info->segs;
3867 total_tx_bytes += buffer_info->bytecount;
3869 e1000_unmap_and_free_tx_resource(adapter, buffer_info);
3870 tx_desc->upper.data = 0;
3872 if (unlikely(++i == tx_ring->count)) i = 0;
3875 eop = tx_ring->buffer_info[i].next_to_watch;
3876 eop_desc = E1000_TX_DESC(*tx_ring, eop);
3879 tx_ring->next_to_clean = i;
3881 #define TX_WAKE_THRESHOLD 32
3882 if (unlikely(count && netif_carrier_ok(netdev) &&
3883 E1000_DESC_UNUSED(tx_ring) >= TX_WAKE_THRESHOLD)) {
3884 /* Make sure that anybody stopping the queue after this
3885 * sees the new next_to_clean.
3889 if (netif_queue_stopped(netdev) &&
3890 !(test_bit(__E1000_DOWN, &adapter->flags))) {
3891 netif_wake_queue(netdev);
3892 ++adapter->restart_queue;
3896 if (adapter->detect_tx_hung) {
3897 /* Detect a transmit hang in hardware, this serializes the
3898 * check with the clearing of time_stamp and movement of i */
3899 adapter->detect_tx_hung = false;
3900 if (tx_ring->buffer_info[eop].time_stamp &&
3901 time_after(jiffies, tx_ring->buffer_info[eop].time_stamp +
3902 (adapter->tx_timeout_factor * HZ)) &&
3903 !(er32(STATUS) & E1000_STATUS_TXOFF)) {
3905 /* detected Tx unit hang */
3906 e_err(drv, "Detected Tx Unit Hang\n"
3910 " next_to_use <%x>\n"
3911 " next_to_clean <%x>\n"
3912 "buffer_info[next_to_clean]\n"
3913 " time_stamp <%lx>\n"
3914 " next_to_watch <%x>\n"
3916 " next_to_watch.status <%x>\n",
3917 (unsigned long)((tx_ring - adapter->tx_ring) /
3918 sizeof(struct e1000_tx_ring)),
3919 readl(hw->hw_addr + tx_ring->tdh),
3920 readl(hw->hw_addr + tx_ring->tdt),
3921 tx_ring->next_to_use,
3922 tx_ring->next_to_clean,
3923 tx_ring->buffer_info[eop].time_stamp,
3926 eop_desc->upper.fields.status);
3927 e1000_dump(adapter);
3928 netif_stop_queue(netdev);
3931 adapter->total_tx_bytes += total_tx_bytes;
3932 adapter->total_tx_packets += total_tx_packets;
3933 netdev->stats.tx_bytes += total_tx_bytes;
3934 netdev->stats.tx_packets += total_tx_packets;
3935 return count < tx_ring->count;
3939 * e1000_rx_checksum - Receive Checksum Offload for 82543
3940 * @adapter: board private structure
3941 * @status_err: receive descriptor status and error fields
3942 * @csum: receive descriptor csum field
3943 * @sk_buff: socket buffer with received data
3946 static void e1000_rx_checksum(struct e1000_adapter *adapter, u32 status_err,
3947 u32 csum, struct sk_buff *skb)
3949 struct e1000_hw *hw = &adapter->hw;
3950 u16 status = (u16)status_err;
3951 u8 errors = (u8)(status_err >> 24);
3953 skb_checksum_none_assert(skb);
3955 /* 82543 or newer only */
3956 if (unlikely(hw->mac_type < e1000_82543)) return;
3957 /* Ignore Checksum bit is set */
3958 if (unlikely(status & E1000_RXD_STAT_IXSM)) return;
3959 /* TCP/UDP checksum error bit is set */
3960 if (unlikely(errors & E1000_RXD_ERR_TCPE)) {
3961 /* let the stack verify checksum errors */
3962 adapter->hw_csum_err++;
3965 /* TCP/UDP Checksum has not been calculated */
3966 if (!(status & E1000_RXD_STAT_TCPCS))
3969 /* It must be a TCP or UDP packet with a valid checksum */
3970 if (likely(status & E1000_RXD_STAT_TCPCS)) {
3971 /* TCP checksum is good */
3972 skb->ip_summed = CHECKSUM_UNNECESSARY;
3974 adapter->hw_csum_good++;
3978 * e1000_consume_page - helper function
3980 static void e1000_consume_page(struct e1000_buffer *bi, struct sk_buff *skb,
3985 skb->data_len += length;
3986 skb->truesize += PAGE_SIZE;
3990 * e1000_receive_skb - helper function to handle rx indications
3991 * @adapter: board private structure
3992 * @status: descriptor status field as written by hardware
3993 * @vlan: descriptor vlan field as written by hardware (no le/be conversion)
3994 * @skb: pointer to sk_buff to be indicated to stack
3996 static void e1000_receive_skb(struct e1000_adapter *adapter, u8 status,
3997 __le16 vlan, struct sk_buff *skb)
3999 skb->protocol = eth_type_trans(skb, adapter->netdev);
4001 if (status & E1000_RXD_STAT_VP) {
4002 u16 vid = le16_to_cpu(vlan) & E1000_RXD_SPC_VLAN_MASK;
4004 __vlan_hwaccel_put_tag(skb, vid);
4006 napi_gro_receive(&adapter->napi, skb);
4010 * e1000_clean_jumbo_rx_irq - Send received data up the network stack; legacy
4011 * @adapter: board private structure
4012 * @rx_ring: ring to clean
4013 * @work_done: amount of napi work completed this call
4014 * @work_to_do: max amount of work allowed for this call to do
4016 * the return value indicates whether actual cleaning was done, there
4017 * is no guarantee that everything was cleaned
4019 static bool e1000_clean_jumbo_rx_irq(struct e1000_adapter *adapter,
4020 struct e1000_rx_ring *rx_ring,
4021 int *work_done, int work_to_do)
4023 struct e1000_hw *hw = &adapter->hw;
4024 struct net_device *netdev = adapter->netdev;
4025 struct pci_dev *pdev = adapter->pdev;
4026 struct e1000_rx_desc *rx_desc, *next_rxd;
4027 struct e1000_buffer *buffer_info, *next_buffer;
4028 unsigned long irq_flags;
4031 int cleaned_count = 0;
4032 bool cleaned = false;
4033 unsigned int total_rx_bytes=0, total_rx_packets=0;
4035 i = rx_ring->next_to_clean;
4036 rx_desc = E1000_RX_DESC(*rx_ring, i);
4037 buffer_info = &rx_ring->buffer_info[i];
4039 while (rx_desc->status & E1000_RXD_STAT_DD) {
4040 struct sk_buff *skb;
4043 if (*work_done >= work_to_do)
4046 rmb(); /* read descriptor and rx_buffer_info after status DD */
4048 status = rx_desc->status;
4049 skb = buffer_info->skb;
4050 buffer_info->skb = NULL;
4052 if (++i == rx_ring->count) i = 0;
4053 next_rxd = E1000_RX_DESC(*rx_ring, i);
4056 next_buffer = &rx_ring->buffer_info[i];
4060 dma_unmap_page(&pdev->dev, buffer_info->dma,
4061 buffer_info->length, DMA_FROM_DEVICE);
4062 buffer_info->dma = 0;
4064 length = le16_to_cpu(rx_desc->length);
4066 /* errors is only valid for DD + EOP descriptors */
4067 if (unlikely((status & E1000_RXD_STAT_EOP) &&
4068 (rx_desc->errors & E1000_RXD_ERR_FRAME_ERR_MASK))) {
4069 u8 last_byte = *(skb->data + length - 1);
4070 if (TBI_ACCEPT(hw, status, rx_desc->errors, length,
4072 spin_lock_irqsave(&adapter->stats_lock,
4074 e1000_tbi_adjust_stats(hw, &adapter->stats,
4076 spin_unlock_irqrestore(&adapter->stats_lock,
4080 if (netdev->features & NETIF_F_RXALL)
4082 /* recycle both page and skb */
4083 buffer_info->skb = skb;
4084 /* an error means any chain goes out the window
4086 if (rx_ring->rx_skb_top)
4087 dev_kfree_skb(rx_ring->rx_skb_top);
4088 rx_ring->rx_skb_top = NULL;
4093 #define rxtop rx_ring->rx_skb_top
4095 if (!(status & E1000_RXD_STAT_EOP)) {
4096 /* this descriptor is only the beginning (or middle) */
4098 /* this is the beginning of a chain */
4100 skb_fill_page_desc(rxtop, 0, buffer_info->page,
4103 /* this is the middle of a chain */
4104 skb_fill_page_desc(rxtop,
4105 skb_shinfo(rxtop)->nr_frags,
4106 buffer_info->page, 0, length);
4107 /* re-use the skb, only consumed the page */
4108 buffer_info->skb = skb;
4110 e1000_consume_page(buffer_info, rxtop, length);
4114 /* end of the chain */
4115 skb_fill_page_desc(rxtop,
4116 skb_shinfo(rxtop)->nr_frags,
4117 buffer_info->page, 0, length);
4118 /* re-use the current skb, we only consumed the
4120 buffer_info->skb = skb;
4123 e1000_consume_page(buffer_info, skb, length);
4125 /* no chain, got EOP, this buf is the packet
4126 * copybreak to save the put_page/alloc_page */
4127 if (length <= copybreak &&
4128 skb_tailroom(skb) >= length) {
4130 vaddr = kmap_atomic(buffer_info->page);
4131 memcpy(skb_tail_pointer(skb), vaddr, length);
4132 kunmap_atomic(vaddr);
4133 /* re-use the page, so don't erase
4134 * buffer_info->page */
4135 skb_put(skb, length);
4137 skb_fill_page_desc(skb, 0,
4138 buffer_info->page, 0,
4140 e1000_consume_page(buffer_info, skb,
4146 /* Receive Checksum Offload XXX recompute due to CRC strip? */
4147 e1000_rx_checksum(adapter,
4149 ((u32)(rx_desc->errors) << 24),
4150 le16_to_cpu(rx_desc->csum), skb);
4152 total_rx_bytes += (skb->len - 4); /* don't count FCS */
4153 if (likely(!(netdev->features & NETIF_F_RXFCS)))
4154 pskb_trim(skb, skb->len - 4);
4157 /* eth type trans needs skb->data to point to something */
4158 if (!pskb_may_pull(skb, ETH_HLEN)) {
4159 e_err(drv, "pskb_may_pull failed.\n");
4164 e1000_receive_skb(adapter, status, rx_desc->special, skb);
4167 rx_desc->status = 0;
4169 /* return some buffers to hardware, one at a time is too slow */
4170 if (unlikely(cleaned_count >= E1000_RX_BUFFER_WRITE)) {
4171 adapter->alloc_rx_buf(adapter, rx_ring, cleaned_count);
4175 /* use prefetched values */
4177 buffer_info = next_buffer;
4179 rx_ring->next_to_clean = i;
4181 cleaned_count = E1000_DESC_UNUSED(rx_ring);
4183 adapter->alloc_rx_buf(adapter, rx_ring, cleaned_count);
4185 adapter->total_rx_packets += total_rx_packets;
4186 adapter->total_rx_bytes += total_rx_bytes;
4187 netdev->stats.rx_bytes += total_rx_bytes;
4188 netdev->stats.rx_packets += total_rx_packets;
4193 * this should improve performance for small packets with large amounts
4194 * of reassembly being done in the stack
4196 static void e1000_check_copybreak(struct net_device *netdev,
4197 struct e1000_buffer *buffer_info,
4198 u32 length, struct sk_buff **skb)
4200 struct sk_buff *new_skb;
4202 if (length > copybreak)
4205 new_skb = netdev_alloc_skb_ip_align(netdev, length);
4209 skb_copy_to_linear_data_offset(new_skb, -NET_IP_ALIGN,
4210 (*skb)->data - NET_IP_ALIGN,
4211 length + NET_IP_ALIGN);
4212 /* save the skb in buffer_info as good */
4213 buffer_info->skb = *skb;
4218 * e1000_clean_rx_irq - Send received data up the network stack; legacy
4219 * @adapter: board private structure
4220 * @rx_ring: ring to clean
4221 * @work_done: amount of napi work completed this call
4222 * @work_to_do: max amount of work allowed for this call to do
4224 static bool e1000_clean_rx_irq(struct e1000_adapter *adapter,
4225 struct e1000_rx_ring *rx_ring,
4226 int *work_done, int work_to_do)
4228 struct e1000_hw *hw = &adapter->hw;
4229 struct net_device *netdev = adapter->netdev;
4230 struct pci_dev *pdev = adapter->pdev;
4231 struct e1000_rx_desc *rx_desc, *next_rxd;
4232 struct e1000_buffer *buffer_info, *next_buffer;
4233 unsigned long flags;
4236 int cleaned_count = 0;
4237 bool cleaned = false;
4238 unsigned int total_rx_bytes=0, total_rx_packets=0;
4240 i = rx_ring->next_to_clean;
4241 rx_desc = E1000_RX_DESC(*rx_ring, i);
4242 buffer_info = &rx_ring->buffer_info[i];
4244 while (rx_desc->status & E1000_RXD_STAT_DD) {
4245 struct sk_buff *skb;
4248 if (*work_done >= work_to_do)
4251 rmb(); /* read descriptor and rx_buffer_info after status DD */
4253 status = rx_desc->status;
4254 skb = buffer_info->skb;
4255 buffer_info->skb = NULL;
4257 prefetch(skb->data - NET_IP_ALIGN);
4259 if (++i == rx_ring->count) i = 0;
4260 next_rxd = E1000_RX_DESC(*rx_ring, i);
4263 next_buffer = &rx_ring->buffer_info[i];
4267 dma_unmap_single(&pdev->dev, buffer_info->dma,
4268 buffer_info->length, DMA_FROM_DEVICE);
4269 buffer_info->dma = 0;
4271 length = le16_to_cpu(rx_desc->length);
4272 /* !EOP means multiple descriptors were used to store a single
4273 * packet, if thats the case we need to toss it. In fact, we
4274 * to toss every packet with the EOP bit clear and the next
4275 * frame that _does_ have the EOP bit set, as it is by
4276 * definition only a frame fragment
4278 if (unlikely(!(status & E1000_RXD_STAT_EOP)))
4279 adapter->discarding = true;
4281 if (adapter->discarding) {
4282 /* All receives must fit into a single buffer */
4283 e_dbg("Receive packet consumed multiple buffers\n");
4285 buffer_info->skb = skb;
4286 if (status & E1000_RXD_STAT_EOP)
4287 adapter->discarding = false;
4291 if (unlikely(rx_desc->errors & E1000_RXD_ERR_FRAME_ERR_MASK)) {
4292 u8 last_byte = *(skb->data + length - 1);
4293 if (TBI_ACCEPT(hw, status, rx_desc->errors, length,
4295 spin_lock_irqsave(&adapter->stats_lock, flags);
4296 e1000_tbi_adjust_stats(hw, &adapter->stats,
4298 spin_unlock_irqrestore(&adapter->stats_lock,
4302 if (netdev->features & NETIF_F_RXALL)
4305 buffer_info->skb = skb;
4311 total_rx_bytes += (length - 4); /* don't count FCS */
4314 if (likely(!(netdev->features & NETIF_F_RXFCS)))
4315 /* adjust length to remove Ethernet CRC, this must be
4316 * done after the TBI_ACCEPT workaround above
4320 e1000_check_copybreak(netdev, buffer_info, length, &skb);
4322 skb_put(skb, length);
4324 /* Receive Checksum Offload */
4325 e1000_rx_checksum(adapter,
4327 ((u32)(rx_desc->errors) << 24),
4328 le16_to_cpu(rx_desc->csum), skb);
4330 e1000_receive_skb(adapter, status, rx_desc->special, skb);
4333 rx_desc->status = 0;
4335 /* return some buffers to hardware, one at a time is too slow */
4336 if (unlikely(cleaned_count >= E1000_RX_BUFFER_WRITE)) {
4337 adapter->alloc_rx_buf(adapter, rx_ring, cleaned_count);
4341 /* use prefetched values */
4343 buffer_info = next_buffer;
4345 rx_ring->next_to_clean = i;
4347 cleaned_count = E1000_DESC_UNUSED(rx_ring);
4349 adapter->alloc_rx_buf(adapter, rx_ring, cleaned_count);
4351 adapter->total_rx_packets += total_rx_packets;
4352 adapter->total_rx_bytes += total_rx_bytes;
4353 netdev->stats.rx_bytes += total_rx_bytes;
4354 netdev->stats.rx_packets += total_rx_packets;
4359 * e1000_alloc_jumbo_rx_buffers - Replace used jumbo receive buffers
4360 * @adapter: address of board private structure
4361 * @rx_ring: pointer to receive ring structure
4362 * @cleaned_count: number of buffers to allocate this pass
4366 e1000_alloc_jumbo_rx_buffers(struct e1000_adapter *adapter,
4367 struct e1000_rx_ring *rx_ring, int cleaned_count)
4369 struct net_device *netdev = adapter->netdev;
4370 struct pci_dev *pdev = adapter->pdev;
4371 struct e1000_rx_desc *rx_desc;
4372 struct e1000_buffer *buffer_info;
4373 struct sk_buff *skb;
4375 unsigned int bufsz = 256 - 16 /*for skb_reserve */ ;
4377 i = rx_ring->next_to_use;
4378 buffer_info = &rx_ring->buffer_info[i];
4380 while (cleaned_count--) {
4381 skb = buffer_info->skb;
4387 skb = netdev_alloc_skb_ip_align(netdev, bufsz);
4388 if (unlikely(!skb)) {
4389 /* Better luck next round */
4390 adapter->alloc_rx_buff_failed++;
4394 /* Fix for errata 23, can't cross 64kB boundary */
4395 if (!e1000_check_64k_bound(adapter, skb->data, bufsz)) {
4396 struct sk_buff *oldskb = skb;
4397 e_err(rx_err, "skb align check failed: %u bytes at "
4398 "%p\n", bufsz, skb->data);
4399 /* Try again, without freeing the previous */
4400 skb = netdev_alloc_skb_ip_align(netdev, bufsz);
4401 /* Failed allocation, critical failure */
4403 dev_kfree_skb(oldskb);
4404 adapter->alloc_rx_buff_failed++;
4408 if (!e1000_check_64k_bound(adapter, skb->data, bufsz)) {
4411 dev_kfree_skb(oldskb);
4412 break; /* while (cleaned_count--) */
4415 /* Use new allocation */
4416 dev_kfree_skb(oldskb);
4418 buffer_info->skb = skb;
4419 buffer_info->length = adapter->rx_buffer_len;
4421 /* allocate a new page if necessary */
4422 if (!buffer_info->page) {
4423 buffer_info->page = alloc_page(GFP_ATOMIC);
4424 if (unlikely(!buffer_info->page)) {
4425 adapter->alloc_rx_buff_failed++;
4430 if (!buffer_info->dma) {
4431 buffer_info->dma = dma_map_page(&pdev->dev,
4432 buffer_info->page, 0,
4433 buffer_info->length,
4435 if (dma_mapping_error(&pdev->dev, buffer_info->dma)) {
4436 put_page(buffer_info->page);
4438 buffer_info->page = NULL;
4439 buffer_info->skb = NULL;
4440 buffer_info->dma = 0;
4441 adapter->alloc_rx_buff_failed++;
4442 break; /* while !buffer_info->skb */
4446 rx_desc = E1000_RX_DESC(*rx_ring, i);
4447 rx_desc->buffer_addr = cpu_to_le64(buffer_info->dma);
4449 if (unlikely(++i == rx_ring->count))
4451 buffer_info = &rx_ring->buffer_info[i];
4454 if (likely(rx_ring->next_to_use != i)) {
4455 rx_ring->next_to_use = i;
4456 if (unlikely(i-- == 0))
4457 i = (rx_ring->count - 1);
4459 /* Force memory writes to complete before letting h/w
4460 * know there are new descriptors to fetch. (Only
4461 * applicable for weak-ordered memory model archs,
4462 * such as IA-64). */
4464 writel(i, adapter->hw.hw_addr + rx_ring->rdt);
4469 * e1000_alloc_rx_buffers - Replace used receive buffers; legacy & extended
4470 * @adapter: address of board private structure
4473 static void e1000_alloc_rx_buffers(struct e1000_adapter *adapter,
4474 struct e1000_rx_ring *rx_ring,
4477 struct e1000_hw *hw = &adapter->hw;
4478 struct net_device *netdev = adapter->netdev;
4479 struct pci_dev *pdev = adapter->pdev;
4480 struct e1000_rx_desc *rx_desc;
4481 struct e1000_buffer *buffer_info;
4482 struct sk_buff *skb;
4484 unsigned int bufsz = adapter->rx_buffer_len;
4486 i = rx_ring->next_to_use;
4487 buffer_info = &rx_ring->buffer_info[i];
4489 while (cleaned_count--) {
4490 skb = buffer_info->skb;
4496 skb = netdev_alloc_skb_ip_align(netdev, bufsz);
4497 if (unlikely(!skb)) {
4498 /* Better luck next round */
4499 adapter->alloc_rx_buff_failed++;
4503 /* Fix for errata 23, can't cross 64kB boundary */
4504 if (!e1000_check_64k_bound(adapter, skb->data, bufsz)) {
4505 struct sk_buff *oldskb = skb;
4506 e_err(rx_err, "skb align check failed: %u bytes at "
4507 "%p\n", bufsz, skb->data);
4508 /* Try again, without freeing the previous */
4509 skb = netdev_alloc_skb_ip_align(netdev, bufsz);
4510 /* Failed allocation, critical failure */
4512 dev_kfree_skb(oldskb);
4513 adapter->alloc_rx_buff_failed++;
4517 if (!e1000_check_64k_bound(adapter, skb->data, bufsz)) {
4520 dev_kfree_skb(oldskb);
4521 adapter->alloc_rx_buff_failed++;
4522 break; /* while !buffer_info->skb */
4525 /* Use new allocation */
4526 dev_kfree_skb(oldskb);
4528 buffer_info->skb = skb;
4529 buffer_info->length = adapter->rx_buffer_len;
4531 buffer_info->dma = dma_map_single(&pdev->dev,
4533 buffer_info->length,
4535 if (dma_mapping_error(&pdev->dev, buffer_info->dma)) {
4537 buffer_info->skb = NULL;
4538 buffer_info->dma = 0;
4539 adapter->alloc_rx_buff_failed++;
4540 break; /* while !buffer_info->skb */
4544 * XXX if it was allocated cleanly it will never map to a
4548 /* Fix for errata 23, can't cross 64kB boundary */
4549 if (!e1000_check_64k_bound(adapter,
4550 (void *)(unsigned long)buffer_info->dma,
4551 adapter->rx_buffer_len)) {
4552 e_err(rx_err, "dma align check failed: %u bytes at "
4553 "%p\n", adapter->rx_buffer_len,
4554 (void *)(unsigned long)buffer_info->dma);
4556 buffer_info->skb = NULL;
4558 dma_unmap_single(&pdev->dev, buffer_info->dma,
4559 adapter->rx_buffer_len,
4561 buffer_info->dma = 0;
4563 adapter->alloc_rx_buff_failed++;
4564 break; /* while !buffer_info->skb */
4566 rx_desc = E1000_RX_DESC(*rx_ring, i);
4567 rx_desc->buffer_addr = cpu_to_le64(buffer_info->dma);
4569 if (unlikely(++i == rx_ring->count))
4571 buffer_info = &rx_ring->buffer_info[i];
4574 if (likely(rx_ring->next_to_use != i)) {
4575 rx_ring->next_to_use = i;
4576 if (unlikely(i-- == 0))
4577 i = (rx_ring->count - 1);
4579 /* Force memory writes to complete before letting h/w
4580 * know there are new descriptors to fetch. (Only
4581 * applicable for weak-ordered memory model archs,
4582 * such as IA-64). */
4584 writel(i, hw->hw_addr + rx_ring->rdt);
4589 * e1000_smartspeed - Workaround for SmartSpeed on 82541 and 82547 controllers.
4593 static void e1000_smartspeed(struct e1000_adapter *adapter)
4595 struct e1000_hw *hw = &adapter->hw;
4599 if ((hw->phy_type != e1000_phy_igp) || !hw->autoneg ||
4600 !(hw->autoneg_advertised & ADVERTISE_1000_FULL))
4603 if (adapter->smartspeed == 0) {
4604 /* If Master/Slave config fault is asserted twice,
4605 * we assume back-to-back */
4606 e1000_read_phy_reg(hw, PHY_1000T_STATUS, &phy_status);
4607 if (!(phy_status & SR_1000T_MS_CONFIG_FAULT)) return;
4608 e1000_read_phy_reg(hw, PHY_1000T_STATUS, &phy_status);
4609 if (!(phy_status & SR_1000T_MS_CONFIG_FAULT)) return;
4610 e1000_read_phy_reg(hw, PHY_1000T_CTRL, &phy_ctrl);
4611 if (phy_ctrl & CR_1000T_MS_ENABLE) {
4612 phy_ctrl &= ~CR_1000T_MS_ENABLE;
4613 e1000_write_phy_reg(hw, PHY_1000T_CTRL,
4615 adapter->smartspeed++;
4616 if (!e1000_phy_setup_autoneg(hw) &&
4617 !e1000_read_phy_reg(hw, PHY_CTRL,
4619 phy_ctrl |= (MII_CR_AUTO_NEG_EN |
4620 MII_CR_RESTART_AUTO_NEG);
4621 e1000_write_phy_reg(hw, PHY_CTRL,
4626 } else if (adapter->smartspeed == E1000_SMARTSPEED_DOWNSHIFT) {
4627 /* If still no link, perhaps using 2/3 pair cable */
4628 e1000_read_phy_reg(hw, PHY_1000T_CTRL, &phy_ctrl);
4629 phy_ctrl |= CR_1000T_MS_ENABLE;
4630 e1000_write_phy_reg(hw, PHY_1000T_CTRL, phy_ctrl);
4631 if (!e1000_phy_setup_autoneg(hw) &&
4632 !e1000_read_phy_reg(hw, PHY_CTRL, &phy_ctrl)) {
4633 phy_ctrl |= (MII_CR_AUTO_NEG_EN |
4634 MII_CR_RESTART_AUTO_NEG);
4635 e1000_write_phy_reg(hw, PHY_CTRL, phy_ctrl);
4638 /* Restart process after E1000_SMARTSPEED_MAX iterations */
4639 if (adapter->smartspeed++ == E1000_SMARTSPEED_MAX)
4640 adapter->smartspeed = 0;
4650 static int e1000_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
4656 return e1000_mii_ioctl(netdev, ifr, cmd);
4669 static int e1000_mii_ioctl(struct net_device *netdev, struct ifreq *ifr,
4672 struct e1000_adapter *adapter = netdev_priv(netdev);
4673 struct e1000_hw *hw = &adapter->hw;
4674 struct mii_ioctl_data *data = if_mii(ifr);
4677 unsigned long flags;
4679 if (hw->media_type != e1000_media_type_copper)
4684 data->phy_id = hw->phy_addr;
4687 spin_lock_irqsave(&adapter->stats_lock, flags);
4688 if (e1000_read_phy_reg(hw, data->reg_num & 0x1F,
4690 spin_unlock_irqrestore(&adapter->stats_lock, flags);
4693 spin_unlock_irqrestore(&adapter->stats_lock, flags);
4696 if (data->reg_num & ~(0x1F))
4698 mii_reg = data->val_in;
4699 spin_lock_irqsave(&adapter->stats_lock, flags);
4700 if (e1000_write_phy_reg(hw, data->reg_num,
4702 spin_unlock_irqrestore(&adapter->stats_lock, flags);
4705 spin_unlock_irqrestore(&adapter->stats_lock, flags);
4706 if (hw->media_type == e1000_media_type_copper) {
4707 switch (data->reg_num) {
4709 if (mii_reg & MII_CR_POWER_DOWN)
4711 if (mii_reg & MII_CR_AUTO_NEG_EN) {
4713 hw->autoneg_advertised = 0x2F;
4718 else if (mii_reg & 0x2000)
4722 retval = e1000_set_spd_dplx(
4730 if (netif_running(adapter->netdev))
4731 e1000_reinit_locked(adapter);
4733 e1000_reset(adapter);
4735 case M88E1000_PHY_SPEC_CTRL:
4736 case M88E1000_EXT_PHY_SPEC_CTRL:
4737 if (e1000_phy_reset(hw))
4742 switch (data->reg_num) {
4744 if (mii_reg & MII_CR_POWER_DOWN)
4746 if (netif_running(adapter->netdev))
4747 e1000_reinit_locked(adapter);
4749 e1000_reset(adapter);
4757 return E1000_SUCCESS;
4760 void e1000_pci_set_mwi(struct e1000_hw *hw)
4762 struct e1000_adapter *adapter = hw->back;
4763 int ret_val = pci_set_mwi(adapter->pdev);
4766 e_err(probe, "Error in setting MWI\n");
4769 void e1000_pci_clear_mwi(struct e1000_hw *hw)
4771 struct e1000_adapter *adapter = hw->back;
4773 pci_clear_mwi(adapter->pdev);
4776 int e1000_pcix_get_mmrbc(struct e1000_hw *hw)
4778 struct e1000_adapter *adapter = hw->back;
4779 return pcix_get_mmrbc(adapter->pdev);
4782 void e1000_pcix_set_mmrbc(struct e1000_hw *hw, int mmrbc)
4784 struct e1000_adapter *adapter = hw->back;
4785 pcix_set_mmrbc(adapter->pdev, mmrbc);
4788 void e1000_io_write(struct e1000_hw *hw, unsigned long port, u32 value)
4793 static bool e1000_vlan_used(struct e1000_adapter *adapter)
4797 for_each_set_bit(vid, adapter->active_vlans, VLAN_N_VID)
4802 static void __e1000_vlan_mode(struct e1000_adapter *adapter,
4803 netdev_features_t features)
4805 struct e1000_hw *hw = &adapter->hw;
4809 if (features & NETIF_F_HW_VLAN_RX) {
4810 /* enable VLAN tag insert/strip */
4811 ctrl |= E1000_CTRL_VME;
4813 /* disable VLAN tag insert/strip */
4814 ctrl &= ~E1000_CTRL_VME;
4818 static void e1000_vlan_filter_on_off(struct e1000_adapter *adapter,
4821 struct e1000_hw *hw = &adapter->hw;
4824 if (!test_bit(__E1000_DOWN, &adapter->flags))
4825 e1000_irq_disable(adapter);
4827 __e1000_vlan_mode(adapter, adapter->netdev->features);
4829 /* enable VLAN receive filtering */
4831 rctl &= ~E1000_RCTL_CFIEN;
4832 if (!(adapter->netdev->flags & IFF_PROMISC))
4833 rctl |= E1000_RCTL_VFE;
4835 e1000_update_mng_vlan(adapter);
4837 /* disable VLAN receive filtering */
4839 rctl &= ~E1000_RCTL_VFE;
4843 if (!test_bit(__E1000_DOWN, &adapter->flags))
4844 e1000_irq_enable(adapter);
4847 static void e1000_vlan_mode(struct net_device *netdev,
4848 netdev_features_t features)
4850 struct e1000_adapter *adapter = netdev_priv(netdev);
4852 if (!test_bit(__E1000_DOWN, &adapter->flags))
4853 e1000_irq_disable(adapter);
4855 __e1000_vlan_mode(adapter, features);
4857 if (!test_bit(__E1000_DOWN, &adapter->flags))
4858 e1000_irq_enable(adapter);
4861 static int e1000_vlan_rx_add_vid(struct net_device *netdev, u16 vid)
4863 struct e1000_adapter *adapter = netdev_priv(netdev);
4864 struct e1000_hw *hw = &adapter->hw;
4867 if ((hw->mng_cookie.status &
4868 E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT) &&
4869 (vid == adapter->mng_vlan_id))
4872 if (!e1000_vlan_used(adapter))
4873 e1000_vlan_filter_on_off(adapter, true);
4875 /* add VID to filter table */
4876 index = (vid >> 5) & 0x7F;
4877 vfta = E1000_READ_REG_ARRAY(hw, VFTA, index);
4878 vfta |= (1 << (vid & 0x1F));
4879 e1000_write_vfta(hw, index, vfta);
4881 set_bit(vid, adapter->active_vlans);
4886 static int e1000_vlan_rx_kill_vid(struct net_device *netdev, u16 vid)
4888 struct e1000_adapter *adapter = netdev_priv(netdev);
4889 struct e1000_hw *hw = &adapter->hw;
4892 if (!test_bit(__E1000_DOWN, &adapter->flags))
4893 e1000_irq_disable(adapter);
4894 if (!test_bit(__E1000_DOWN, &adapter->flags))
4895 e1000_irq_enable(adapter);
4897 /* remove VID from filter table */
4898 index = (vid >> 5) & 0x7F;
4899 vfta = E1000_READ_REG_ARRAY(hw, VFTA, index);
4900 vfta &= ~(1 << (vid & 0x1F));
4901 e1000_write_vfta(hw, index, vfta);
4903 clear_bit(vid, adapter->active_vlans);
4905 if (!e1000_vlan_used(adapter))
4906 e1000_vlan_filter_on_off(adapter, false);
4911 static void e1000_restore_vlan(struct e1000_adapter *adapter)
4915 if (!e1000_vlan_used(adapter))
4918 e1000_vlan_filter_on_off(adapter, true);
4919 for_each_set_bit(vid, adapter->active_vlans, VLAN_N_VID)
4920 e1000_vlan_rx_add_vid(adapter->netdev, vid);
4923 int e1000_set_spd_dplx(struct e1000_adapter *adapter, u32 spd, u8 dplx)
4925 struct e1000_hw *hw = &adapter->hw;
4929 /* Make sure dplx is at most 1 bit and lsb of speed is not set
4930 * for the switch() below to work */
4931 if ((spd & 1) || (dplx & ~1))
4934 /* Fiber NICs only allow 1000 gbps Full duplex */
4935 if ((hw->media_type == e1000_media_type_fiber) &&
4936 spd != SPEED_1000 &&
4937 dplx != DUPLEX_FULL)
4940 switch (spd + dplx) {
4941 case SPEED_10 + DUPLEX_HALF:
4942 hw->forced_speed_duplex = e1000_10_half;
4944 case SPEED_10 + DUPLEX_FULL:
4945 hw->forced_speed_duplex = e1000_10_full;
4947 case SPEED_100 + DUPLEX_HALF:
4948 hw->forced_speed_duplex = e1000_100_half;
4950 case SPEED_100 + DUPLEX_FULL:
4951 hw->forced_speed_duplex = e1000_100_full;
4953 case SPEED_1000 + DUPLEX_FULL:
4955 hw->autoneg_advertised = ADVERTISE_1000_FULL;
4957 case SPEED_1000 + DUPLEX_HALF: /* not supported */
4964 e_err(probe, "Unsupported Speed/Duplex configuration\n");
4968 static int __e1000_shutdown(struct pci_dev *pdev, bool *enable_wake)
4970 struct net_device *netdev = pci_get_drvdata(pdev);
4971 struct e1000_adapter *adapter = netdev_priv(netdev);
4972 struct e1000_hw *hw = &adapter->hw;
4973 u32 ctrl, ctrl_ext, rctl, status;
4974 u32 wufc = adapter->wol;
4979 netif_device_detach(netdev);
4981 if (netif_running(netdev)) {
4982 WARN_ON(test_bit(__E1000_RESETTING, &adapter->flags));
4983 e1000_down(adapter);
4987 retval = pci_save_state(pdev);
4992 status = er32(STATUS);
4993 if (status & E1000_STATUS_LU)
4994 wufc &= ~E1000_WUFC_LNKC;
4997 e1000_setup_rctl(adapter);
4998 e1000_set_rx_mode(netdev);
5002 /* turn on all-multi mode if wake on multicast is enabled */
5003 if (wufc & E1000_WUFC_MC)
5004 rctl |= E1000_RCTL_MPE;
5006 /* enable receives in the hardware */
5007 ew32(RCTL, rctl | E1000_RCTL_EN);
5009 if (hw->mac_type >= e1000_82540) {
5011 /* advertise wake from D3Cold */
5012 #define E1000_CTRL_ADVD3WUC 0x00100000
5013 /* phy power management enable */
5014 #define E1000_CTRL_EN_PHY_PWR_MGMT 0x00200000
5015 ctrl |= E1000_CTRL_ADVD3WUC |
5016 E1000_CTRL_EN_PHY_PWR_MGMT;
5020 if (hw->media_type == e1000_media_type_fiber ||
5021 hw->media_type == e1000_media_type_internal_serdes) {
5022 /* keep the laser running in D3 */
5023 ctrl_ext = er32(CTRL_EXT);
5024 ctrl_ext |= E1000_CTRL_EXT_SDP7_DATA;
5025 ew32(CTRL_EXT, ctrl_ext);
5028 ew32(WUC, E1000_WUC_PME_EN);
5035 e1000_release_manageability(adapter);
5037 *enable_wake = !!wufc;
5039 /* make sure adapter isn't asleep if manageability is enabled */
5040 if (adapter->en_mng_pt)
5041 *enable_wake = true;
5043 if (netif_running(netdev))
5044 e1000_free_irq(adapter);
5046 pci_disable_device(pdev);
5052 static int e1000_suspend(struct pci_dev *pdev, pm_message_t state)
5057 retval = __e1000_shutdown(pdev, &wake);
5062 pci_prepare_to_sleep(pdev);
5064 pci_wake_from_d3(pdev, false);
5065 pci_set_power_state(pdev, PCI_D3hot);
5071 static int e1000_resume(struct pci_dev *pdev)
5073 struct net_device *netdev = pci_get_drvdata(pdev);
5074 struct e1000_adapter *adapter = netdev_priv(netdev);
5075 struct e1000_hw *hw = &adapter->hw;
5078 pci_set_power_state(pdev, PCI_D0);
5079 pci_restore_state(pdev);
5080 pci_save_state(pdev);
5082 if (adapter->need_ioport)
5083 err = pci_enable_device(pdev);
5085 err = pci_enable_device_mem(pdev);
5087 pr_err("Cannot enable PCI device from suspend\n");
5090 pci_set_master(pdev);
5092 pci_enable_wake(pdev, PCI_D3hot, 0);
5093 pci_enable_wake(pdev, PCI_D3cold, 0);
5095 if (netif_running(netdev)) {
5096 err = e1000_request_irq(adapter);
5101 e1000_power_up_phy(adapter);
5102 e1000_reset(adapter);
5105 e1000_init_manageability(adapter);
5107 if (netif_running(netdev))
5110 netif_device_attach(netdev);
5116 static void e1000_shutdown(struct pci_dev *pdev)
5120 __e1000_shutdown(pdev, &wake);
5122 if (system_state == SYSTEM_POWER_OFF) {
5123 pci_wake_from_d3(pdev, wake);
5124 pci_set_power_state(pdev, PCI_D3hot);
5128 #ifdef CONFIG_NET_POLL_CONTROLLER
5130 * Polling 'interrupt' - used by things like netconsole to send skbs
5131 * without having to re-enable interrupts. It's not called while
5132 * the interrupt routine is executing.
5134 static void e1000_netpoll(struct net_device *netdev)
5136 struct e1000_adapter *adapter = netdev_priv(netdev);
5138 disable_irq(adapter->pdev->irq);
5139 e1000_intr(adapter->pdev->irq, netdev);
5140 enable_irq(adapter->pdev->irq);
5145 * e1000_io_error_detected - called when PCI error is detected
5146 * @pdev: Pointer to PCI device
5147 * @state: The current pci connection state
5149 * This function is called after a PCI bus error affecting
5150 * this device has been detected.
5152 static pci_ers_result_t e1000_io_error_detected(struct pci_dev *pdev,
5153 pci_channel_state_t state)
5155 struct net_device *netdev = pci_get_drvdata(pdev);
5156 struct e1000_adapter *adapter = netdev_priv(netdev);
5158 netif_device_detach(netdev);
5160 if (state == pci_channel_io_perm_failure)
5161 return PCI_ERS_RESULT_DISCONNECT;
5163 if (netif_running(netdev))
5164 e1000_down(adapter);
5165 pci_disable_device(pdev);
5167 /* Request a slot slot reset. */
5168 return PCI_ERS_RESULT_NEED_RESET;
5172 * e1000_io_slot_reset - called after the pci bus has been reset.
5173 * @pdev: Pointer to PCI device
5175 * Restart the card from scratch, as if from a cold-boot. Implementation
5176 * resembles the first-half of the e1000_resume routine.
5178 static pci_ers_result_t e1000_io_slot_reset(struct pci_dev *pdev)
5180 struct net_device *netdev = pci_get_drvdata(pdev);
5181 struct e1000_adapter *adapter = netdev_priv(netdev);
5182 struct e1000_hw *hw = &adapter->hw;
5185 if (adapter->need_ioport)
5186 err = pci_enable_device(pdev);
5188 err = pci_enable_device_mem(pdev);
5190 pr_err("Cannot re-enable PCI device after reset.\n");
5191 return PCI_ERS_RESULT_DISCONNECT;
5193 pci_set_master(pdev);
5195 pci_enable_wake(pdev, PCI_D3hot, 0);
5196 pci_enable_wake(pdev, PCI_D3cold, 0);
5198 e1000_reset(adapter);
5201 return PCI_ERS_RESULT_RECOVERED;
5205 * e1000_io_resume - called when traffic can start flowing again.
5206 * @pdev: Pointer to PCI device
5208 * This callback is called when the error recovery driver tells us that
5209 * its OK to resume normal operation. Implementation resembles the
5210 * second-half of the e1000_resume routine.
5212 static void e1000_io_resume(struct pci_dev *pdev)
5214 struct net_device *netdev = pci_get_drvdata(pdev);
5215 struct e1000_adapter *adapter = netdev_priv(netdev);
5217 e1000_init_manageability(adapter);
5219 if (netif_running(netdev)) {
5220 if (e1000_up(adapter)) {
5221 pr_info("can't bring device back up after reset\n");
5226 netif_device_attach(netdev);