1 /*******************************************************************************
3 * Intel Ethernet Controller XL710 Family Linux Driver
4 * Copyright(c) 2013 - 2014 Intel Corporation.
6 * This program is free software; you can redistribute it and/or modify it
7 * under the terms and conditions of the GNU General Public License,
8 * version 2, as published by the Free Software Foundation.
10 * This program is distributed in the hope it will be useful, but WITHOUT
11 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
12 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
15 * You should have received a copy of the GNU General Public License along
16 * with this program. If not, see <http://www.gnu.org/licenses/>.
18 * The full GNU General Public License is included in this distribution in
19 * the file called "COPYING".
21 * Contact Information:
22 * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
23 * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
25 ******************************************************************************/
29 #include "i40e_diag.h"
30 #ifdef CONFIG_I40E_VXLAN
31 #include <net/vxlan.h>
34 const char i40e_driver_name[] = "i40e";
35 static const char i40e_driver_string[] =
36 "Intel(R) Ethernet Connection XL710 Network Driver";
40 #define DRV_VERSION_MAJOR 1
41 #define DRV_VERSION_MINOR 1
42 #define DRV_VERSION_BUILD 23
43 #define DRV_VERSION __stringify(DRV_VERSION_MAJOR) "." \
44 __stringify(DRV_VERSION_MINOR) "." \
45 __stringify(DRV_VERSION_BUILD) DRV_KERN
46 const char i40e_driver_version_str[] = DRV_VERSION;
47 static const char i40e_copyright[] = "Copyright (c) 2013 - 2014 Intel Corporation.";
49 /* a bit of forward declarations */
50 static void i40e_vsi_reinit_locked(struct i40e_vsi *vsi);
51 static void i40e_handle_reset_warning(struct i40e_pf *pf);
52 static int i40e_add_vsi(struct i40e_vsi *vsi);
53 static int i40e_add_veb(struct i40e_veb *veb, struct i40e_vsi *vsi);
54 static int i40e_setup_pf_switch(struct i40e_pf *pf, bool reinit);
55 static int i40e_setup_misc_vector(struct i40e_pf *pf);
56 static void i40e_determine_queue_usage(struct i40e_pf *pf);
57 static int i40e_setup_pf_filter_control(struct i40e_pf *pf);
58 static void i40e_fdir_sb_setup(struct i40e_pf *pf);
59 static int i40e_veb_get_bw_info(struct i40e_veb *veb);
61 /* i40e_pci_tbl - PCI Device ID Table
63 * Last entry must be all 0s
65 * { Vendor ID, Device ID, SubVendor ID, SubDevice ID,
66 * Class, Class Mask, private data (not used) }
68 static const struct pci_device_id i40e_pci_tbl[] = {
69 {PCI_VDEVICE(INTEL, I40E_DEV_ID_SFP_XL710), 0},
70 {PCI_VDEVICE(INTEL, I40E_DEV_ID_QEMU), 0},
71 {PCI_VDEVICE(INTEL, I40E_DEV_ID_KX_A), 0},
72 {PCI_VDEVICE(INTEL, I40E_DEV_ID_KX_B), 0},
73 {PCI_VDEVICE(INTEL, I40E_DEV_ID_KX_C), 0},
74 {PCI_VDEVICE(INTEL, I40E_DEV_ID_QSFP_A), 0},
75 {PCI_VDEVICE(INTEL, I40E_DEV_ID_QSFP_B), 0},
76 {PCI_VDEVICE(INTEL, I40E_DEV_ID_QSFP_C), 0},
77 {PCI_VDEVICE(INTEL, I40E_DEV_ID_10G_BASE_T), 0},
78 /* required last entry */
81 MODULE_DEVICE_TABLE(pci, i40e_pci_tbl);
83 #define I40E_MAX_VF_COUNT 128
84 static int debug = -1;
85 module_param(debug, int, 0);
86 MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)");
88 MODULE_AUTHOR("Intel Corporation, <e1000-devel@lists.sourceforge.net>");
89 MODULE_DESCRIPTION("Intel(R) Ethernet Connection XL710 Network Driver");
90 MODULE_LICENSE("GPL");
91 MODULE_VERSION(DRV_VERSION);
94 * i40e_allocate_dma_mem_d - OS specific memory alloc for shared code
95 * @hw: pointer to the HW structure
96 * @mem: ptr to mem struct to fill out
97 * @size: size of memory requested
98 * @alignment: what to align the allocation to
100 int i40e_allocate_dma_mem_d(struct i40e_hw *hw, struct i40e_dma_mem *mem,
101 u64 size, u32 alignment)
103 struct i40e_pf *pf = (struct i40e_pf *)hw->back;
105 mem->size = ALIGN(size, alignment);
106 mem->va = dma_zalloc_coherent(&pf->pdev->dev, mem->size,
107 &mem->pa, GFP_KERNEL);
115 * i40e_free_dma_mem_d - OS specific memory free for shared code
116 * @hw: pointer to the HW structure
117 * @mem: ptr to mem struct to free
119 int i40e_free_dma_mem_d(struct i40e_hw *hw, struct i40e_dma_mem *mem)
121 struct i40e_pf *pf = (struct i40e_pf *)hw->back;
123 dma_free_coherent(&pf->pdev->dev, mem->size, mem->va, mem->pa);
132 * i40e_allocate_virt_mem_d - OS specific memory alloc for shared code
133 * @hw: pointer to the HW structure
134 * @mem: ptr to mem struct to fill out
135 * @size: size of memory requested
137 int i40e_allocate_virt_mem_d(struct i40e_hw *hw, struct i40e_virt_mem *mem,
141 mem->va = kzalloc(size, GFP_KERNEL);
150 * i40e_free_virt_mem_d - OS specific memory free for shared code
151 * @hw: pointer to the HW structure
152 * @mem: ptr to mem struct to free
154 int i40e_free_virt_mem_d(struct i40e_hw *hw, struct i40e_virt_mem *mem)
156 /* it's ok to kfree a NULL pointer */
165 * i40e_get_lump - find a lump of free generic resource
166 * @pf: board private structure
167 * @pile: the pile of resource to search
168 * @needed: the number of items needed
169 * @id: an owner id to stick on the items assigned
171 * Returns the base item index of the lump, or negative for error
173 * The search_hint trick and lack of advanced fit-finding only work
174 * because we're highly likely to have all the same size lump requests.
175 * Linear search time and any fragmentation should be minimal.
177 static int i40e_get_lump(struct i40e_pf *pf, struct i40e_lump_tracking *pile,
183 if (!pile || needed == 0 || id >= I40E_PILE_VALID_BIT) {
184 dev_info(&pf->pdev->dev,
185 "param err: pile=%p needed=%d id=0x%04x\n",
190 /* start the linear search with an imperfect hint */
191 i = pile->search_hint;
192 while (i < pile->num_entries) {
193 /* skip already allocated entries */
194 if (pile->list[i] & I40E_PILE_VALID_BIT) {
199 /* do we have enough in this lump? */
200 for (j = 0; (j < needed) && ((i+j) < pile->num_entries); j++) {
201 if (pile->list[i+j] & I40E_PILE_VALID_BIT)
206 /* there was enough, so assign it to the requestor */
207 for (j = 0; j < needed; j++)
208 pile->list[i+j] = id | I40E_PILE_VALID_BIT;
210 pile->search_hint = i + j;
213 /* not enough, so skip over it and continue looking */
222 * i40e_put_lump - return a lump of generic resource
223 * @pile: the pile of resource to search
224 * @index: the base item index
225 * @id: the owner id of the items assigned
227 * Returns the count of items in the lump
229 static int i40e_put_lump(struct i40e_lump_tracking *pile, u16 index, u16 id)
231 int valid_id = (id | I40E_PILE_VALID_BIT);
235 if (!pile || index >= pile->num_entries)
239 i < pile->num_entries && pile->list[i] == valid_id;
245 if (count && index < pile->search_hint)
246 pile->search_hint = index;
252 * i40e_service_event_schedule - Schedule the service task to wake up
253 * @pf: board private structure
255 * If not already scheduled, this puts the task into the work queue
257 static void i40e_service_event_schedule(struct i40e_pf *pf)
259 if (!test_bit(__I40E_DOWN, &pf->state) &&
260 !test_bit(__I40E_RESET_RECOVERY_PENDING, &pf->state) &&
261 !test_and_set_bit(__I40E_SERVICE_SCHED, &pf->state))
262 schedule_work(&pf->service_task);
266 * i40e_tx_timeout - Respond to a Tx Hang
267 * @netdev: network interface device structure
269 * If any port has noticed a Tx timeout, it is likely that the whole
270 * device is munged, not just the one netdev port, so go for the full
274 void i40e_tx_timeout(struct net_device *netdev)
276 static void i40e_tx_timeout(struct net_device *netdev)
279 struct i40e_netdev_priv *np = netdev_priv(netdev);
280 struct i40e_vsi *vsi = np->vsi;
281 struct i40e_pf *pf = vsi->back;
283 pf->tx_timeout_count++;
285 if (time_after(jiffies, (pf->tx_timeout_last_recovery + HZ*20)))
286 pf->tx_timeout_recovery_level = 1;
287 pf->tx_timeout_last_recovery = jiffies;
288 netdev_info(netdev, "tx_timeout recovery level %d\n",
289 pf->tx_timeout_recovery_level);
291 switch (pf->tx_timeout_recovery_level) {
293 /* disable and re-enable queues for the VSI */
294 if (in_interrupt()) {
295 set_bit(__I40E_REINIT_REQUESTED, &pf->state);
296 set_bit(__I40E_REINIT_REQUESTED, &vsi->state);
298 i40e_vsi_reinit_locked(vsi);
302 set_bit(__I40E_PF_RESET_REQUESTED, &pf->state);
305 set_bit(__I40E_CORE_RESET_REQUESTED, &pf->state);
308 set_bit(__I40E_GLOBAL_RESET_REQUESTED, &pf->state);
311 netdev_err(netdev, "tx_timeout recovery unsuccessful\n");
312 set_bit(__I40E_DOWN_REQUESTED, &pf->state);
313 set_bit(__I40E_DOWN_REQUESTED, &vsi->state);
316 i40e_service_event_schedule(pf);
317 pf->tx_timeout_recovery_level++;
321 * i40e_release_rx_desc - Store the new tail and head values
322 * @rx_ring: ring to bump
323 * @val: new head index
325 static inline void i40e_release_rx_desc(struct i40e_ring *rx_ring, u32 val)
327 rx_ring->next_to_use = val;
329 /* Force memory writes to complete before letting h/w
330 * know there are new descriptors to fetch. (Only
331 * applicable for weak-ordered memory model archs,
335 writel(val, rx_ring->tail);
339 * i40e_get_vsi_stats_struct - Get System Network Statistics
340 * @vsi: the VSI we care about
342 * Returns the address of the device statistics structure.
343 * The statistics are actually updated from the service task.
345 struct rtnl_link_stats64 *i40e_get_vsi_stats_struct(struct i40e_vsi *vsi)
347 return &vsi->net_stats;
351 * i40e_get_netdev_stats_struct - Get statistics for netdev interface
352 * @netdev: network interface device structure
354 * Returns the address of the device statistics structure.
355 * The statistics are actually updated from the service task.
358 struct rtnl_link_stats64 *i40e_get_netdev_stats_struct(
359 struct net_device *netdev,
360 struct rtnl_link_stats64 *stats)
362 static struct rtnl_link_stats64 *i40e_get_netdev_stats_struct(
363 struct net_device *netdev,
364 struct rtnl_link_stats64 *stats)
367 struct i40e_netdev_priv *np = netdev_priv(netdev);
368 struct i40e_ring *tx_ring, *rx_ring;
369 struct i40e_vsi *vsi = np->vsi;
370 struct rtnl_link_stats64 *vsi_stats = i40e_get_vsi_stats_struct(vsi);
373 if (test_bit(__I40E_DOWN, &vsi->state))
380 for (i = 0; i < vsi->num_queue_pairs; i++) {
384 tx_ring = ACCESS_ONCE(vsi->tx_rings[i]);
389 start = u64_stats_fetch_begin_irq(&tx_ring->syncp);
390 packets = tx_ring->stats.packets;
391 bytes = tx_ring->stats.bytes;
392 } while (u64_stats_fetch_retry_irq(&tx_ring->syncp, start));
394 stats->tx_packets += packets;
395 stats->tx_bytes += bytes;
396 rx_ring = &tx_ring[1];
399 start = u64_stats_fetch_begin_irq(&rx_ring->syncp);
400 packets = rx_ring->stats.packets;
401 bytes = rx_ring->stats.bytes;
402 } while (u64_stats_fetch_retry_irq(&rx_ring->syncp, start));
404 stats->rx_packets += packets;
405 stats->rx_bytes += bytes;
409 /* following stats updated by i40e_watchdog_subtask() */
410 stats->multicast = vsi_stats->multicast;
411 stats->tx_errors = vsi_stats->tx_errors;
412 stats->tx_dropped = vsi_stats->tx_dropped;
413 stats->rx_errors = vsi_stats->rx_errors;
414 stats->rx_crc_errors = vsi_stats->rx_crc_errors;
415 stats->rx_length_errors = vsi_stats->rx_length_errors;
421 * i40e_vsi_reset_stats - Resets all stats of the given vsi
422 * @vsi: the VSI to have its stats reset
424 void i40e_vsi_reset_stats(struct i40e_vsi *vsi)
426 struct rtnl_link_stats64 *ns;
432 ns = i40e_get_vsi_stats_struct(vsi);
433 memset(ns, 0, sizeof(*ns));
434 memset(&vsi->net_stats_offsets, 0, sizeof(vsi->net_stats_offsets));
435 memset(&vsi->eth_stats, 0, sizeof(vsi->eth_stats));
436 memset(&vsi->eth_stats_offsets, 0, sizeof(vsi->eth_stats_offsets));
437 if (vsi->rx_rings && vsi->rx_rings[0]) {
438 for (i = 0; i < vsi->num_queue_pairs; i++) {
439 memset(&vsi->rx_rings[i]->stats, 0 ,
440 sizeof(vsi->rx_rings[i]->stats));
441 memset(&vsi->rx_rings[i]->rx_stats, 0 ,
442 sizeof(vsi->rx_rings[i]->rx_stats));
443 memset(&vsi->tx_rings[i]->stats, 0 ,
444 sizeof(vsi->tx_rings[i]->stats));
445 memset(&vsi->tx_rings[i]->tx_stats, 0,
446 sizeof(vsi->tx_rings[i]->tx_stats));
449 vsi->stat_offsets_loaded = false;
453 * i40e_pf_reset_stats - Reset all of the stats for the given pf
454 * @pf: the PF to be reset
456 void i40e_pf_reset_stats(struct i40e_pf *pf)
460 memset(&pf->stats, 0, sizeof(pf->stats));
461 memset(&pf->stats_offsets, 0, sizeof(pf->stats_offsets));
462 pf->stat_offsets_loaded = false;
464 for (i = 0; i < I40E_MAX_VEB; i++) {
466 memset(&pf->veb[i]->stats, 0,
467 sizeof(pf->veb[i]->stats));
468 memset(&pf->veb[i]->stats_offsets, 0,
469 sizeof(pf->veb[i]->stats_offsets));
470 pf->veb[i]->stat_offsets_loaded = false;
476 * i40e_stat_update48 - read and update a 48 bit stat from the chip
477 * @hw: ptr to the hardware info
478 * @hireg: the high 32 bit reg to read
479 * @loreg: the low 32 bit reg to read
480 * @offset_loaded: has the initial offset been loaded yet
481 * @offset: ptr to current offset value
482 * @stat: ptr to the stat
484 * Since the device stats are not reset at PFReset, they likely will not
485 * be zeroed when the driver starts. We'll save the first values read
486 * and use them as offsets to be subtracted from the raw values in order
487 * to report stats that count from zero. In the process, we also manage
488 * the potential roll-over.
490 static void i40e_stat_update48(struct i40e_hw *hw, u32 hireg, u32 loreg,
491 bool offset_loaded, u64 *offset, u64 *stat)
495 if (hw->device_id == I40E_DEV_ID_QEMU) {
496 new_data = rd32(hw, loreg);
497 new_data |= ((u64)(rd32(hw, hireg) & 0xFFFF)) << 32;
499 new_data = rd64(hw, loreg);
503 if (likely(new_data >= *offset))
504 *stat = new_data - *offset;
506 *stat = (new_data + ((u64)1 << 48)) - *offset;
507 *stat &= 0xFFFFFFFFFFFFULL;
511 * i40e_stat_update32 - read and update a 32 bit stat from the chip
512 * @hw: ptr to the hardware info
513 * @reg: the hw reg to read
514 * @offset_loaded: has the initial offset been loaded yet
515 * @offset: ptr to current offset value
516 * @stat: ptr to the stat
518 static void i40e_stat_update32(struct i40e_hw *hw, u32 reg,
519 bool offset_loaded, u64 *offset, u64 *stat)
523 new_data = rd32(hw, reg);
526 if (likely(new_data >= *offset))
527 *stat = (u32)(new_data - *offset);
529 *stat = (u32)((new_data + ((u64)1 << 32)) - *offset);
533 * i40e_update_eth_stats - Update VSI-specific ethernet statistics counters.
534 * @vsi: the VSI to be updated
536 void i40e_update_eth_stats(struct i40e_vsi *vsi)
538 int stat_idx = le16_to_cpu(vsi->info.stat_counter_idx);
539 struct i40e_pf *pf = vsi->back;
540 struct i40e_hw *hw = &pf->hw;
541 struct i40e_eth_stats *oes;
542 struct i40e_eth_stats *es; /* device's eth stats */
544 es = &vsi->eth_stats;
545 oes = &vsi->eth_stats_offsets;
547 /* Gather up the stats that the hw collects */
548 i40e_stat_update32(hw, I40E_GLV_TEPC(stat_idx),
549 vsi->stat_offsets_loaded,
550 &oes->tx_errors, &es->tx_errors);
551 i40e_stat_update32(hw, I40E_GLV_RDPC(stat_idx),
552 vsi->stat_offsets_loaded,
553 &oes->rx_discards, &es->rx_discards);
554 i40e_stat_update32(hw, I40E_GLV_RUPP(stat_idx),
555 vsi->stat_offsets_loaded,
556 &oes->rx_unknown_protocol, &es->rx_unknown_protocol);
557 i40e_stat_update32(hw, I40E_GLV_TEPC(stat_idx),
558 vsi->stat_offsets_loaded,
559 &oes->tx_errors, &es->tx_errors);
561 i40e_stat_update48(hw, I40E_GLV_GORCH(stat_idx),
562 I40E_GLV_GORCL(stat_idx),
563 vsi->stat_offsets_loaded,
564 &oes->rx_bytes, &es->rx_bytes);
565 i40e_stat_update48(hw, I40E_GLV_UPRCH(stat_idx),
566 I40E_GLV_UPRCL(stat_idx),
567 vsi->stat_offsets_loaded,
568 &oes->rx_unicast, &es->rx_unicast);
569 i40e_stat_update48(hw, I40E_GLV_MPRCH(stat_idx),
570 I40E_GLV_MPRCL(stat_idx),
571 vsi->stat_offsets_loaded,
572 &oes->rx_multicast, &es->rx_multicast);
573 i40e_stat_update48(hw, I40E_GLV_BPRCH(stat_idx),
574 I40E_GLV_BPRCL(stat_idx),
575 vsi->stat_offsets_loaded,
576 &oes->rx_broadcast, &es->rx_broadcast);
578 i40e_stat_update48(hw, I40E_GLV_GOTCH(stat_idx),
579 I40E_GLV_GOTCL(stat_idx),
580 vsi->stat_offsets_loaded,
581 &oes->tx_bytes, &es->tx_bytes);
582 i40e_stat_update48(hw, I40E_GLV_UPTCH(stat_idx),
583 I40E_GLV_UPTCL(stat_idx),
584 vsi->stat_offsets_loaded,
585 &oes->tx_unicast, &es->tx_unicast);
586 i40e_stat_update48(hw, I40E_GLV_MPTCH(stat_idx),
587 I40E_GLV_MPTCL(stat_idx),
588 vsi->stat_offsets_loaded,
589 &oes->tx_multicast, &es->tx_multicast);
590 i40e_stat_update48(hw, I40E_GLV_BPTCH(stat_idx),
591 I40E_GLV_BPTCL(stat_idx),
592 vsi->stat_offsets_loaded,
593 &oes->tx_broadcast, &es->tx_broadcast);
594 vsi->stat_offsets_loaded = true;
598 * i40e_update_veb_stats - Update Switch component statistics
599 * @veb: the VEB being updated
601 static void i40e_update_veb_stats(struct i40e_veb *veb)
603 struct i40e_pf *pf = veb->pf;
604 struct i40e_hw *hw = &pf->hw;
605 struct i40e_eth_stats *oes;
606 struct i40e_eth_stats *es; /* device's eth stats */
609 idx = veb->stats_idx;
611 oes = &veb->stats_offsets;
613 /* Gather up the stats that the hw collects */
614 i40e_stat_update32(hw, I40E_GLSW_TDPC(idx),
615 veb->stat_offsets_loaded,
616 &oes->tx_discards, &es->tx_discards);
617 if (hw->revision_id > 0)
618 i40e_stat_update32(hw, I40E_GLSW_RUPP(idx),
619 veb->stat_offsets_loaded,
620 &oes->rx_unknown_protocol,
621 &es->rx_unknown_protocol);
622 i40e_stat_update48(hw, I40E_GLSW_GORCH(idx), I40E_GLSW_GORCL(idx),
623 veb->stat_offsets_loaded,
624 &oes->rx_bytes, &es->rx_bytes);
625 i40e_stat_update48(hw, I40E_GLSW_UPRCH(idx), I40E_GLSW_UPRCL(idx),
626 veb->stat_offsets_loaded,
627 &oes->rx_unicast, &es->rx_unicast);
628 i40e_stat_update48(hw, I40E_GLSW_MPRCH(idx), I40E_GLSW_MPRCL(idx),
629 veb->stat_offsets_loaded,
630 &oes->rx_multicast, &es->rx_multicast);
631 i40e_stat_update48(hw, I40E_GLSW_BPRCH(idx), I40E_GLSW_BPRCL(idx),
632 veb->stat_offsets_loaded,
633 &oes->rx_broadcast, &es->rx_broadcast);
635 i40e_stat_update48(hw, I40E_GLSW_GOTCH(idx), I40E_GLSW_GOTCL(idx),
636 veb->stat_offsets_loaded,
637 &oes->tx_bytes, &es->tx_bytes);
638 i40e_stat_update48(hw, I40E_GLSW_UPTCH(idx), I40E_GLSW_UPTCL(idx),
639 veb->stat_offsets_loaded,
640 &oes->tx_unicast, &es->tx_unicast);
641 i40e_stat_update48(hw, I40E_GLSW_MPTCH(idx), I40E_GLSW_MPTCL(idx),
642 veb->stat_offsets_loaded,
643 &oes->tx_multicast, &es->tx_multicast);
644 i40e_stat_update48(hw, I40E_GLSW_BPTCH(idx), I40E_GLSW_BPTCL(idx),
645 veb->stat_offsets_loaded,
646 &oes->tx_broadcast, &es->tx_broadcast);
647 veb->stat_offsets_loaded = true;
652 * i40e_update_fcoe_stats - Update FCoE-specific ethernet statistics counters.
653 * @vsi: the VSI that is capable of doing FCoE
655 static void i40e_update_fcoe_stats(struct i40e_vsi *vsi)
657 struct i40e_pf *pf = vsi->back;
658 struct i40e_hw *hw = &pf->hw;
659 struct i40e_fcoe_stats *ofs;
660 struct i40e_fcoe_stats *fs; /* device's eth stats */
663 if (vsi->type != I40E_VSI_FCOE)
666 idx = (pf->pf_seid - I40E_BASE_PF_SEID) + I40E_FCOE_PF_STAT_OFFSET;
667 fs = &vsi->fcoe_stats;
668 ofs = &vsi->fcoe_stats_offsets;
670 i40e_stat_update32(hw, I40E_GL_FCOEPRC(idx),
671 vsi->fcoe_stat_offsets_loaded,
672 &ofs->rx_fcoe_packets, &fs->rx_fcoe_packets);
673 i40e_stat_update48(hw, I40E_GL_FCOEDWRCH(idx), I40E_GL_FCOEDWRCL(idx),
674 vsi->fcoe_stat_offsets_loaded,
675 &ofs->rx_fcoe_dwords, &fs->rx_fcoe_dwords);
676 i40e_stat_update32(hw, I40E_GL_FCOERPDC(idx),
677 vsi->fcoe_stat_offsets_loaded,
678 &ofs->rx_fcoe_dropped, &fs->rx_fcoe_dropped);
679 i40e_stat_update32(hw, I40E_GL_FCOEPTC(idx),
680 vsi->fcoe_stat_offsets_loaded,
681 &ofs->tx_fcoe_packets, &fs->tx_fcoe_packets);
682 i40e_stat_update48(hw, I40E_GL_FCOEDWTCH(idx), I40E_GL_FCOEDWTCL(idx),
683 vsi->fcoe_stat_offsets_loaded,
684 &ofs->tx_fcoe_dwords, &fs->tx_fcoe_dwords);
685 i40e_stat_update32(hw, I40E_GL_FCOECRC(idx),
686 vsi->fcoe_stat_offsets_loaded,
687 &ofs->fcoe_bad_fccrc, &fs->fcoe_bad_fccrc);
688 i40e_stat_update32(hw, I40E_GL_FCOELAST(idx),
689 vsi->fcoe_stat_offsets_loaded,
690 &ofs->fcoe_last_error, &fs->fcoe_last_error);
691 i40e_stat_update32(hw, I40E_GL_FCOEDDPC(idx),
692 vsi->fcoe_stat_offsets_loaded,
693 &ofs->fcoe_ddp_count, &fs->fcoe_ddp_count);
695 vsi->fcoe_stat_offsets_loaded = true;
700 * i40e_update_link_xoff_rx - Update XOFF received in link flow control mode
701 * @pf: the corresponding PF
703 * Update the Rx XOFF counter (PAUSE frames) in link flow control mode
705 static void i40e_update_link_xoff_rx(struct i40e_pf *pf)
707 struct i40e_hw_port_stats *osd = &pf->stats_offsets;
708 struct i40e_hw_port_stats *nsd = &pf->stats;
709 struct i40e_hw *hw = &pf->hw;
713 if ((hw->fc.current_mode != I40E_FC_FULL) &&
714 (hw->fc.current_mode != I40E_FC_RX_PAUSE))
717 xoff = nsd->link_xoff_rx;
718 i40e_stat_update32(hw, I40E_GLPRT_LXOFFRXC(hw->port),
719 pf->stat_offsets_loaded,
720 &osd->link_xoff_rx, &nsd->link_xoff_rx);
722 /* No new LFC xoff rx */
723 if (!(nsd->link_xoff_rx - xoff))
726 /* Clear the __I40E_HANG_CHECK_ARMED bit for all Tx rings */
727 for (v = 0; v < pf->num_alloc_vsi; v++) {
728 struct i40e_vsi *vsi = pf->vsi[v];
730 if (!vsi || !vsi->tx_rings[0])
733 for (i = 0; i < vsi->num_queue_pairs; i++) {
734 struct i40e_ring *ring = vsi->tx_rings[i];
735 clear_bit(__I40E_HANG_CHECK_ARMED, &ring->state);
741 * i40e_update_prio_xoff_rx - Update XOFF received in PFC mode
742 * @pf: the corresponding PF
744 * Update the Rx XOFF counter (PAUSE frames) in PFC mode
746 static void i40e_update_prio_xoff_rx(struct i40e_pf *pf)
748 struct i40e_hw_port_stats *osd = &pf->stats_offsets;
749 struct i40e_hw_port_stats *nsd = &pf->stats;
750 bool xoff[I40E_MAX_TRAFFIC_CLASS] = {false};
751 struct i40e_dcbx_config *dcb_cfg;
752 struct i40e_hw *hw = &pf->hw;
756 dcb_cfg = &hw->local_dcbx_config;
758 /* See if DCB enabled with PFC TC */
759 if (!(pf->flags & I40E_FLAG_DCB_ENABLED) ||
760 !(dcb_cfg->pfc.pfcenable)) {
761 i40e_update_link_xoff_rx(pf);
765 for (i = 0; i < I40E_MAX_USER_PRIORITY; i++) {
766 u64 prio_xoff = nsd->priority_xoff_rx[i];
767 i40e_stat_update32(hw, I40E_GLPRT_PXOFFRXC(hw->port, i),
768 pf->stat_offsets_loaded,
769 &osd->priority_xoff_rx[i],
770 &nsd->priority_xoff_rx[i]);
772 /* No new PFC xoff rx */
773 if (!(nsd->priority_xoff_rx[i] - prio_xoff))
775 /* Get the TC for given priority */
776 tc = dcb_cfg->etscfg.prioritytable[i];
780 /* Clear the __I40E_HANG_CHECK_ARMED bit for Tx rings */
781 for (v = 0; v < pf->num_alloc_vsi; v++) {
782 struct i40e_vsi *vsi = pf->vsi[v];
784 if (!vsi || !vsi->tx_rings[0])
787 for (i = 0; i < vsi->num_queue_pairs; i++) {
788 struct i40e_ring *ring = vsi->tx_rings[i];
792 clear_bit(__I40E_HANG_CHECK_ARMED,
799 * i40e_update_vsi_stats - Update the vsi statistics counters.
800 * @vsi: the VSI to be updated
802 * There are a few instances where we store the same stat in a
803 * couple of different structs. This is partly because we have
804 * the netdev stats that need to be filled out, which is slightly
805 * different from the "eth_stats" defined by the chip and used in
806 * VF communications. We sort it out here.
808 static void i40e_update_vsi_stats(struct i40e_vsi *vsi)
810 struct i40e_pf *pf = vsi->back;
811 struct rtnl_link_stats64 *ons;
812 struct rtnl_link_stats64 *ns; /* netdev stats */
813 struct i40e_eth_stats *oes;
814 struct i40e_eth_stats *es; /* device's eth stats */
815 u32 tx_restart, tx_busy;
824 if (test_bit(__I40E_DOWN, &vsi->state) ||
825 test_bit(__I40E_CONFIG_BUSY, &pf->state))
828 ns = i40e_get_vsi_stats_struct(vsi);
829 ons = &vsi->net_stats_offsets;
830 es = &vsi->eth_stats;
831 oes = &vsi->eth_stats_offsets;
833 /* Gather up the netdev and vsi stats that the driver collects
834 * on the fly during packet processing
838 tx_restart = tx_busy = 0;
842 for (q = 0; q < vsi->num_queue_pairs; q++) {
844 p = ACCESS_ONCE(vsi->tx_rings[q]);
847 start = u64_stats_fetch_begin_irq(&p->syncp);
848 packets = p->stats.packets;
849 bytes = p->stats.bytes;
850 } while (u64_stats_fetch_retry_irq(&p->syncp, start));
853 tx_restart += p->tx_stats.restart_queue;
854 tx_busy += p->tx_stats.tx_busy;
856 /* Rx queue is part of the same block as Tx queue */
859 start = u64_stats_fetch_begin_irq(&p->syncp);
860 packets = p->stats.packets;
861 bytes = p->stats.bytes;
862 } while (u64_stats_fetch_retry_irq(&p->syncp, start));
865 rx_buf += p->rx_stats.alloc_buff_failed;
866 rx_page += p->rx_stats.alloc_page_failed;
869 vsi->tx_restart = tx_restart;
870 vsi->tx_busy = tx_busy;
871 vsi->rx_page_failed = rx_page;
872 vsi->rx_buf_failed = rx_buf;
874 ns->rx_packets = rx_p;
876 ns->tx_packets = tx_p;
879 /* update netdev stats from eth stats */
880 i40e_update_eth_stats(vsi);
881 ons->tx_errors = oes->tx_errors;
882 ns->tx_errors = es->tx_errors;
883 ons->multicast = oes->rx_multicast;
884 ns->multicast = es->rx_multicast;
885 ons->rx_dropped = oes->rx_discards;
886 ns->rx_dropped = es->rx_discards;
887 ons->tx_dropped = oes->tx_discards;
888 ns->tx_dropped = es->tx_discards;
890 /* pull in a couple PF stats if this is the main vsi */
891 if (vsi == pf->vsi[pf->lan_vsi]) {
892 ns->rx_crc_errors = pf->stats.crc_errors;
893 ns->rx_errors = pf->stats.crc_errors + pf->stats.illegal_bytes;
894 ns->rx_length_errors = pf->stats.rx_length_errors;
899 * i40e_update_pf_stats - Update the pf statistics counters.
900 * @pf: the PF to be updated
902 static void i40e_update_pf_stats(struct i40e_pf *pf)
904 struct i40e_hw_port_stats *osd = &pf->stats_offsets;
905 struct i40e_hw_port_stats *nsd = &pf->stats;
906 struct i40e_hw *hw = &pf->hw;
910 i40e_stat_update48(hw, I40E_GLPRT_GORCH(hw->port),
911 I40E_GLPRT_GORCL(hw->port),
912 pf->stat_offsets_loaded,
913 &osd->eth.rx_bytes, &nsd->eth.rx_bytes);
914 i40e_stat_update48(hw, I40E_GLPRT_GOTCH(hw->port),
915 I40E_GLPRT_GOTCL(hw->port),
916 pf->stat_offsets_loaded,
917 &osd->eth.tx_bytes, &nsd->eth.tx_bytes);
918 i40e_stat_update32(hw, I40E_GLPRT_RDPC(hw->port),
919 pf->stat_offsets_loaded,
920 &osd->eth.rx_discards,
921 &nsd->eth.rx_discards);
922 i40e_stat_update32(hw, I40E_GLPRT_TDPC(hw->port),
923 pf->stat_offsets_loaded,
924 &osd->eth.tx_discards,
925 &nsd->eth.tx_discards);
927 i40e_stat_update48(hw, I40E_GLPRT_UPRCH(hw->port),
928 I40E_GLPRT_UPRCL(hw->port),
929 pf->stat_offsets_loaded,
930 &osd->eth.rx_unicast,
931 &nsd->eth.rx_unicast);
932 i40e_stat_update48(hw, I40E_GLPRT_MPRCH(hw->port),
933 I40E_GLPRT_MPRCL(hw->port),
934 pf->stat_offsets_loaded,
935 &osd->eth.rx_multicast,
936 &nsd->eth.rx_multicast);
937 i40e_stat_update48(hw, I40E_GLPRT_BPRCH(hw->port),
938 I40E_GLPRT_BPRCL(hw->port),
939 pf->stat_offsets_loaded,
940 &osd->eth.rx_broadcast,
941 &nsd->eth.rx_broadcast);
942 i40e_stat_update48(hw, I40E_GLPRT_UPTCH(hw->port),
943 I40E_GLPRT_UPTCL(hw->port),
944 pf->stat_offsets_loaded,
945 &osd->eth.tx_unicast,
946 &nsd->eth.tx_unicast);
947 i40e_stat_update48(hw, I40E_GLPRT_MPTCH(hw->port),
948 I40E_GLPRT_MPTCL(hw->port),
949 pf->stat_offsets_loaded,
950 &osd->eth.tx_multicast,
951 &nsd->eth.tx_multicast);
952 i40e_stat_update48(hw, I40E_GLPRT_BPTCH(hw->port),
953 I40E_GLPRT_BPTCL(hw->port),
954 pf->stat_offsets_loaded,
955 &osd->eth.tx_broadcast,
956 &nsd->eth.tx_broadcast);
958 i40e_stat_update32(hw, I40E_GLPRT_TDOLD(hw->port),
959 pf->stat_offsets_loaded,
960 &osd->tx_dropped_link_down,
961 &nsd->tx_dropped_link_down);
963 i40e_stat_update32(hw, I40E_GLPRT_CRCERRS(hw->port),
964 pf->stat_offsets_loaded,
965 &osd->crc_errors, &nsd->crc_errors);
967 i40e_stat_update32(hw, I40E_GLPRT_ILLERRC(hw->port),
968 pf->stat_offsets_loaded,
969 &osd->illegal_bytes, &nsd->illegal_bytes);
971 i40e_stat_update32(hw, I40E_GLPRT_MLFC(hw->port),
972 pf->stat_offsets_loaded,
973 &osd->mac_local_faults,
974 &nsd->mac_local_faults);
975 i40e_stat_update32(hw, I40E_GLPRT_MRFC(hw->port),
976 pf->stat_offsets_loaded,
977 &osd->mac_remote_faults,
978 &nsd->mac_remote_faults);
980 i40e_stat_update32(hw, I40E_GLPRT_RLEC(hw->port),
981 pf->stat_offsets_loaded,
982 &osd->rx_length_errors,
983 &nsd->rx_length_errors);
985 i40e_stat_update32(hw, I40E_GLPRT_LXONRXC(hw->port),
986 pf->stat_offsets_loaded,
987 &osd->link_xon_rx, &nsd->link_xon_rx);
988 i40e_stat_update32(hw, I40E_GLPRT_LXONTXC(hw->port),
989 pf->stat_offsets_loaded,
990 &osd->link_xon_tx, &nsd->link_xon_tx);
991 i40e_update_prio_xoff_rx(pf); /* handles I40E_GLPRT_LXOFFRXC */
992 i40e_stat_update32(hw, I40E_GLPRT_LXOFFTXC(hw->port),
993 pf->stat_offsets_loaded,
994 &osd->link_xoff_tx, &nsd->link_xoff_tx);
996 for (i = 0; i < 8; i++) {
997 i40e_stat_update32(hw, I40E_GLPRT_PXONRXC(hw->port, i),
998 pf->stat_offsets_loaded,
999 &osd->priority_xon_rx[i],
1000 &nsd->priority_xon_rx[i]);
1001 i40e_stat_update32(hw, I40E_GLPRT_PXONTXC(hw->port, i),
1002 pf->stat_offsets_loaded,
1003 &osd->priority_xon_tx[i],
1004 &nsd->priority_xon_tx[i]);
1005 i40e_stat_update32(hw, I40E_GLPRT_PXOFFTXC(hw->port, i),
1006 pf->stat_offsets_loaded,
1007 &osd->priority_xoff_tx[i],
1008 &nsd->priority_xoff_tx[i]);
1009 i40e_stat_update32(hw,
1010 I40E_GLPRT_RXON2OFFCNT(hw->port, i),
1011 pf->stat_offsets_loaded,
1012 &osd->priority_xon_2_xoff[i],
1013 &nsd->priority_xon_2_xoff[i]);
1016 i40e_stat_update48(hw, I40E_GLPRT_PRC64H(hw->port),
1017 I40E_GLPRT_PRC64L(hw->port),
1018 pf->stat_offsets_loaded,
1019 &osd->rx_size_64, &nsd->rx_size_64);
1020 i40e_stat_update48(hw, I40E_GLPRT_PRC127H(hw->port),
1021 I40E_GLPRT_PRC127L(hw->port),
1022 pf->stat_offsets_loaded,
1023 &osd->rx_size_127, &nsd->rx_size_127);
1024 i40e_stat_update48(hw, I40E_GLPRT_PRC255H(hw->port),
1025 I40E_GLPRT_PRC255L(hw->port),
1026 pf->stat_offsets_loaded,
1027 &osd->rx_size_255, &nsd->rx_size_255);
1028 i40e_stat_update48(hw, I40E_GLPRT_PRC511H(hw->port),
1029 I40E_GLPRT_PRC511L(hw->port),
1030 pf->stat_offsets_loaded,
1031 &osd->rx_size_511, &nsd->rx_size_511);
1032 i40e_stat_update48(hw, I40E_GLPRT_PRC1023H(hw->port),
1033 I40E_GLPRT_PRC1023L(hw->port),
1034 pf->stat_offsets_loaded,
1035 &osd->rx_size_1023, &nsd->rx_size_1023);
1036 i40e_stat_update48(hw, I40E_GLPRT_PRC1522H(hw->port),
1037 I40E_GLPRT_PRC1522L(hw->port),
1038 pf->stat_offsets_loaded,
1039 &osd->rx_size_1522, &nsd->rx_size_1522);
1040 i40e_stat_update48(hw, I40E_GLPRT_PRC9522H(hw->port),
1041 I40E_GLPRT_PRC9522L(hw->port),
1042 pf->stat_offsets_loaded,
1043 &osd->rx_size_big, &nsd->rx_size_big);
1045 i40e_stat_update48(hw, I40E_GLPRT_PTC64H(hw->port),
1046 I40E_GLPRT_PTC64L(hw->port),
1047 pf->stat_offsets_loaded,
1048 &osd->tx_size_64, &nsd->tx_size_64);
1049 i40e_stat_update48(hw, I40E_GLPRT_PTC127H(hw->port),
1050 I40E_GLPRT_PTC127L(hw->port),
1051 pf->stat_offsets_loaded,
1052 &osd->tx_size_127, &nsd->tx_size_127);
1053 i40e_stat_update48(hw, I40E_GLPRT_PTC255H(hw->port),
1054 I40E_GLPRT_PTC255L(hw->port),
1055 pf->stat_offsets_loaded,
1056 &osd->tx_size_255, &nsd->tx_size_255);
1057 i40e_stat_update48(hw, I40E_GLPRT_PTC511H(hw->port),
1058 I40E_GLPRT_PTC511L(hw->port),
1059 pf->stat_offsets_loaded,
1060 &osd->tx_size_511, &nsd->tx_size_511);
1061 i40e_stat_update48(hw, I40E_GLPRT_PTC1023H(hw->port),
1062 I40E_GLPRT_PTC1023L(hw->port),
1063 pf->stat_offsets_loaded,
1064 &osd->tx_size_1023, &nsd->tx_size_1023);
1065 i40e_stat_update48(hw, I40E_GLPRT_PTC1522H(hw->port),
1066 I40E_GLPRT_PTC1522L(hw->port),
1067 pf->stat_offsets_loaded,
1068 &osd->tx_size_1522, &nsd->tx_size_1522);
1069 i40e_stat_update48(hw, I40E_GLPRT_PTC9522H(hw->port),
1070 I40E_GLPRT_PTC9522L(hw->port),
1071 pf->stat_offsets_loaded,
1072 &osd->tx_size_big, &nsd->tx_size_big);
1074 i40e_stat_update32(hw, I40E_GLPRT_RUC(hw->port),
1075 pf->stat_offsets_loaded,
1076 &osd->rx_undersize, &nsd->rx_undersize);
1077 i40e_stat_update32(hw, I40E_GLPRT_RFC(hw->port),
1078 pf->stat_offsets_loaded,
1079 &osd->rx_fragments, &nsd->rx_fragments);
1080 i40e_stat_update32(hw, I40E_GLPRT_ROC(hw->port),
1081 pf->stat_offsets_loaded,
1082 &osd->rx_oversize, &nsd->rx_oversize);
1083 i40e_stat_update32(hw, I40E_GLPRT_RJC(hw->port),
1084 pf->stat_offsets_loaded,
1085 &osd->rx_jabber, &nsd->rx_jabber);
1088 i40e_stat_update32(hw, I40E_GLQF_PCNT(pf->fd_atr_cnt_idx),
1089 pf->stat_offsets_loaded,
1090 &osd->fd_atr_match, &nsd->fd_atr_match);
1091 i40e_stat_update32(hw, I40E_GLQF_PCNT(pf->fd_sb_cnt_idx),
1092 pf->stat_offsets_loaded,
1093 &osd->fd_sb_match, &nsd->fd_sb_match);
1095 val = rd32(hw, I40E_PRTPM_EEE_STAT);
1096 nsd->tx_lpi_status =
1097 (val & I40E_PRTPM_EEE_STAT_TX_LPI_STATUS_MASK) >>
1098 I40E_PRTPM_EEE_STAT_TX_LPI_STATUS_SHIFT;
1099 nsd->rx_lpi_status =
1100 (val & I40E_PRTPM_EEE_STAT_RX_LPI_STATUS_MASK) >>
1101 I40E_PRTPM_EEE_STAT_RX_LPI_STATUS_SHIFT;
1102 i40e_stat_update32(hw, I40E_PRTPM_TLPIC,
1103 pf->stat_offsets_loaded,
1104 &osd->tx_lpi_count, &nsd->tx_lpi_count);
1105 i40e_stat_update32(hw, I40E_PRTPM_RLPIC,
1106 pf->stat_offsets_loaded,
1107 &osd->rx_lpi_count, &nsd->rx_lpi_count);
1109 pf->stat_offsets_loaded = true;
1113 * i40e_update_stats - Update the various statistics counters.
1114 * @vsi: the VSI to be updated
1116 * Update the various stats for this VSI and its related entities.
1118 void i40e_update_stats(struct i40e_vsi *vsi)
1120 struct i40e_pf *pf = vsi->back;
1122 if (vsi == pf->vsi[pf->lan_vsi])
1123 i40e_update_pf_stats(pf);
1125 i40e_update_vsi_stats(vsi);
1127 i40e_update_fcoe_stats(vsi);
1132 * i40e_find_filter - Search VSI filter list for specific mac/vlan filter
1133 * @vsi: the VSI to be searched
1134 * @macaddr: the MAC address
1136 * @is_vf: make sure its a vf filter, else doesn't matter
1137 * @is_netdev: make sure its a netdev filter, else doesn't matter
1139 * Returns ptr to the filter object or NULL
1141 static struct i40e_mac_filter *i40e_find_filter(struct i40e_vsi *vsi,
1142 u8 *macaddr, s16 vlan,
1143 bool is_vf, bool is_netdev)
1145 struct i40e_mac_filter *f;
1147 if (!vsi || !macaddr)
1150 list_for_each_entry(f, &vsi->mac_filter_list, list) {
1151 if ((ether_addr_equal(macaddr, f->macaddr)) &&
1152 (vlan == f->vlan) &&
1153 (!is_vf || f->is_vf) &&
1154 (!is_netdev || f->is_netdev))
1161 * i40e_find_mac - Find a mac addr in the macvlan filters list
1162 * @vsi: the VSI to be searched
1163 * @macaddr: the MAC address we are searching for
1164 * @is_vf: make sure its a vf filter, else doesn't matter
1165 * @is_netdev: make sure its a netdev filter, else doesn't matter
1167 * Returns the first filter with the provided MAC address or NULL if
1168 * MAC address was not found
1170 struct i40e_mac_filter *i40e_find_mac(struct i40e_vsi *vsi, u8 *macaddr,
1171 bool is_vf, bool is_netdev)
1173 struct i40e_mac_filter *f;
1175 if (!vsi || !macaddr)
1178 list_for_each_entry(f, &vsi->mac_filter_list, list) {
1179 if ((ether_addr_equal(macaddr, f->macaddr)) &&
1180 (!is_vf || f->is_vf) &&
1181 (!is_netdev || f->is_netdev))
1188 * i40e_is_vsi_in_vlan - Check if VSI is in vlan mode
1189 * @vsi: the VSI to be searched
1191 * Returns true if VSI is in vlan mode or false otherwise
1193 bool i40e_is_vsi_in_vlan(struct i40e_vsi *vsi)
1195 struct i40e_mac_filter *f;
1197 /* Only -1 for all the filters denotes not in vlan mode
1198 * so we have to go through all the list in order to make sure
1200 list_for_each_entry(f, &vsi->mac_filter_list, list) {
1209 * i40e_put_mac_in_vlan - Make macvlan filters from macaddrs and vlans
1210 * @vsi: the VSI to be searched
1211 * @macaddr: the mac address to be filtered
1212 * @is_vf: true if it is a vf
1213 * @is_netdev: true if it is a netdev
1215 * Goes through all the macvlan filters and adds a
1216 * macvlan filter for each unique vlan that already exists
1218 * Returns first filter found on success, else NULL
1220 struct i40e_mac_filter *i40e_put_mac_in_vlan(struct i40e_vsi *vsi, u8 *macaddr,
1221 bool is_vf, bool is_netdev)
1223 struct i40e_mac_filter *f;
1225 list_for_each_entry(f, &vsi->mac_filter_list, list) {
1226 if (!i40e_find_filter(vsi, macaddr, f->vlan,
1227 is_vf, is_netdev)) {
1228 if (!i40e_add_filter(vsi, macaddr, f->vlan,
1234 return list_first_entry_or_null(&vsi->mac_filter_list,
1235 struct i40e_mac_filter, list);
1239 * i40e_rm_default_mac_filter - Remove the default MAC filter set by NVM
1240 * @vsi: the PF Main VSI - inappropriate for any other VSI
1241 * @macaddr: the MAC address
1243 * Some older firmware configurations set up a default promiscuous VLAN
1244 * filter that needs to be removed.
1246 static int i40e_rm_default_mac_filter(struct i40e_vsi *vsi, u8 *macaddr)
1248 struct i40e_aqc_remove_macvlan_element_data element;
1249 struct i40e_pf *pf = vsi->back;
1252 /* Only appropriate for the PF main VSI */
1253 if (vsi->type != I40E_VSI_MAIN)
1256 memset(&element, 0, sizeof(element));
1257 ether_addr_copy(element.mac_addr, macaddr);
1258 element.vlan_tag = 0;
1259 element.flags = I40E_AQC_MACVLAN_DEL_PERFECT_MATCH |
1260 I40E_AQC_MACVLAN_DEL_IGNORE_VLAN;
1261 aq_ret = i40e_aq_remove_macvlan(&pf->hw, vsi->seid, &element, 1, NULL);
1269 * i40e_add_filter - Add a mac/vlan filter to the VSI
1270 * @vsi: the VSI to be searched
1271 * @macaddr: the MAC address
1273 * @is_vf: make sure its a vf filter, else doesn't matter
1274 * @is_netdev: make sure its a netdev filter, else doesn't matter
1276 * Returns ptr to the filter object or NULL when no memory available.
1278 struct i40e_mac_filter *i40e_add_filter(struct i40e_vsi *vsi,
1279 u8 *macaddr, s16 vlan,
1280 bool is_vf, bool is_netdev)
1282 struct i40e_mac_filter *f;
1284 if (!vsi || !macaddr)
1287 f = i40e_find_filter(vsi, macaddr, vlan, is_vf, is_netdev);
1289 f = kzalloc(sizeof(*f), GFP_ATOMIC);
1291 goto add_filter_out;
1293 ether_addr_copy(f->macaddr, macaddr);
1297 INIT_LIST_HEAD(&f->list);
1298 list_add(&f->list, &vsi->mac_filter_list);
1301 /* increment counter and add a new flag if needed */
1307 } else if (is_netdev) {
1308 if (!f->is_netdev) {
1309 f->is_netdev = true;
1316 /* changed tells sync_filters_subtask to
1317 * push the filter down to the firmware
1320 vsi->flags |= I40E_VSI_FLAG_FILTER_CHANGED;
1321 vsi->back->flags |= I40E_FLAG_FILTER_SYNC;
1329 * i40e_del_filter - Remove a mac/vlan filter from the VSI
1330 * @vsi: the VSI to be searched
1331 * @macaddr: the MAC address
1333 * @is_vf: make sure it's a vf filter, else doesn't matter
1334 * @is_netdev: make sure it's a netdev filter, else doesn't matter
1336 void i40e_del_filter(struct i40e_vsi *vsi,
1337 u8 *macaddr, s16 vlan,
1338 bool is_vf, bool is_netdev)
1340 struct i40e_mac_filter *f;
1342 if (!vsi || !macaddr)
1345 f = i40e_find_filter(vsi, macaddr, vlan, is_vf, is_netdev);
1346 if (!f || f->counter == 0)
1354 } else if (is_netdev) {
1356 f->is_netdev = false;
1360 /* make sure we don't remove a filter in use by vf or netdev */
1362 min_f += (f->is_vf ? 1 : 0);
1363 min_f += (f->is_netdev ? 1 : 0);
1365 if (f->counter > min_f)
1369 /* counter == 0 tells sync_filters_subtask to
1370 * remove the filter from the firmware's list
1372 if (f->counter == 0) {
1374 vsi->flags |= I40E_VSI_FLAG_FILTER_CHANGED;
1375 vsi->back->flags |= I40E_FLAG_FILTER_SYNC;
1380 * i40e_set_mac - NDO callback to set mac address
1381 * @netdev: network interface device structure
1382 * @p: pointer to an address structure
1384 * Returns 0 on success, negative on failure
1387 int i40e_set_mac(struct net_device *netdev, void *p)
1389 static int i40e_set_mac(struct net_device *netdev, void *p)
1392 struct i40e_netdev_priv *np = netdev_priv(netdev);
1393 struct i40e_vsi *vsi = np->vsi;
1394 struct i40e_pf *pf = vsi->back;
1395 struct i40e_hw *hw = &pf->hw;
1396 struct sockaddr *addr = p;
1397 struct i40e_mac_filter *f;
1399 if (!is_valid_ether_addr(addr->sa_data))
1400 return -EADDRNOTAVAIL;
1402 if (ether_addr_equal(netdev->dev_addr, addr->sa_data)) {
1403 netdev_info(netdev, "already using mac address %pM\n",
1408 if (test_bit(__I40E_DOWN, &vsi->back->state) ||
1409 test_bit(__I40E_RESET_RECOVERY_PENDING, &vsi->back->state))
1410 return -EADDRNOTAVAIL;
1412 if (ether_addr_equal(hw->mac.addr, addr->sa_data))
1413 netdev_info(netdev, "returning to hw mac address %pM\n",
1416 netdev_info(netdev, "set new mac address %pM\n", addr->sa_data);
1418 if (vsi->type == I40E_VSI_MAIN) {
1420 ret = i40e_aq_mac_address_write(&vsi->back->hw,
1421 I40E_AQC_WRITE_TYPE_LAA_WOL,
1422 addr->sa_data, NULL);
1425 "Addr change for Main VSI failed: %d\n",
1427 return -EADDRNOTAVAIL;
1431 if (ether_addr_equal(netdev->dev_addr, hw->mac.addr)) {
1432 struct i40e_aqc_remove_macvlan_element_data element;
1434 memset(&element, 0, sizeof(element));
1435 ether_addr_copy(element.mac_addr, netdev->dev_addr);
1436 element.flags = I40E_AQC_MACVLAN_DEL_PERFECT_MATCH;
1437 i40e_aq_remove_macvlan(&pf->hw, vsi->seid, &element, 1, NULL);
1439 i40e_del_filter(vsi, netdev->dev_addr, I40E_VLAN_ANY,
1443 if (ether_addr_equal(addr->sa_data, hw->mac.addr)) {
1444 struct i40e_aqc_add_macvlan_element_data element;
1446 memset(&element, 0, sizeof(element));
1447 ether_addr_copy(element.mac_addr, hw->mac.addr);
1448 element.flags = cpu_to_le16(I40E_AQC_MACVLAN_ADD_PERFECT_MATCH);
1449 i40e_aq_add_macvlan(&pf->hw, vsi->seid, &element, 1, NULL);
1451 f = i40e_add_filter(vsi, addr->sa_data, I40E_VLAN_ANY,
1457 i40e_sync_vsi_filters(vsi);
1458 ether_addr_copy(netdev->dev_addr, addr->sa_data);
1464 * i40e_vsi_setup_queue_map - Setup a VSI queue map based on enabled_tc
1465 * @vsi: the VSI being setup
1466 * @ctxt: VSI context structure
1467 * @enabled_tc: Enabled TCs bitmap
1468 * @is_add: True if called before Add VSI
1470 * Setup VSI queue mapping for enabled traffic classes.
1473 void i40e_vsi_setup_queue_map(struct i40e_vsi *vsi,
1474 struct i40e_vsi_context *ctxt,
1478 static void i40e_vsi_setup_queue_map(struct i40e_vsi *vsi,
1479 struct i40e_vsi_context *ctxt,
1484 struct i40e_pf *pf = vsi->back;
1494 sections = I40E_AQ_VSI_PROP_QUEUE_MAP_VALID;
1497 if (enabled_tc && (vsi->back->flags & I40E_FLAG_DCB_ENABLED)) {
1498 /* Find numtc from enabled TC bitmap */
1499 for (i = 0; i < I40E_MAX_TRAFFIC_CLASS; i++) {
1500 if (enabled_tc & (1 << i)) /* TC is enabled */
1504 dev_warn(&pf->pdev->dev, "DCB is enabled but no TC enabled, forcing TC0\n");
1508 /* At least TC0 is enabled in case of non-DCB case */
1512 vsi->tc_config.numtc = numtc;
1513 vsi->tc_config.enabled_tc = enabled_tc ? enabled_tc : 1;
1514 /* Number of queues per enabled TC */
1515 num_tc_qps = vsi->alloc_queue_pairs/numtc;
1516 num_tc_qps = min_t(int, num_tc_qps, I40E_MAX_QUEUES_PER_TC);
1518 /* Setup queue offset/count for all TCs for given VSI */
1519 for (i = 0; i < I40E_MAX_TRAFFIC_CLASS; i++) {
1520 /* See if the given TC is enabled for the given VSI */
1521 if (vsi->tc_config.enabled_tc & (1 << i)) { /* TC is enabled */
1524 switch (vsi->type) {
1526 qcount = min_t(int, pf->rss_size, num_tc_qps);
1530 qcount = num_tc_qps;
1534 case I40E_VSI_SRIOV:
1535 case I40E_VSI_VMDQ2:
1537 qcount = num_tc_qps;
1541 vsi->tc_config.tc_info[i].qoffset = offset;
1542 vsi->tc_config.tc_info[i].qcount = qcount;
1544 /* find the power-of-2 of the number of queue pairs */
1547 while (num_qps && ((1 << pow) < qcount)) {
1552 vsi->tc_config.tc_info[i].netdev_tc = netdev_tc++;
1554 (offset << I40E_AQ_VSI_TC_QUE_OFFSET_SHIFT) |
1555 (pow << I40E_AQ_VSI_TC_QUE_NUMBER_SHIFT);
1559 /* TC is not enabled so set the offset to
1560 * default queue and allocate one queue
1563 vsi->tc_config.tc_info[i].qoffset = 0;
1564 vsi->tc_config.tc_info[i].qcount = 1;
1565 vsi->tc_config.tc_info[i].netdev_tc = 0;
1569 ctxt->info.tc_mapping[i] = cpu_to_le16(qmap);
1572 /* Set actual Tx/Rx queue pairs */
1573 vsi->num_queue_pairs = offset;
1575 /* Scheduler section valid can only be set for ADD VSI */
1577 sections |= I40E_AQ_VSI_PROP_SCHED_VALID;
1579 ctxt->info.up_enable_bits = enabled_tc;
1581 if (vsi->type == I40E_VSI_SRIOV) {
1582 ctxt->info.mapping_flags |=
1583 cpu_to_le16(I40E_AQ_VSI_QUE_MAP_NONCONTIG);
1584 for (i = 0; i < vsi->num_queue_pairs; i++)
1585 ctxt->info.queue_mapping[i] =
1586 cpu_to_le16(vsi->base_queue + i);
1588 ctxt->info.mapping_flags |=
1589 cpu_to_le16(I40E_AQ_VSI_QUE_MAP_CONTIG);
1590 ctxt->info.queue_mapping[0] = cpu_to_le16(vsi->base_queue);
1592 ctxt->info.valid_sections |= cpu_to_le16(sections);
1596 * i40e_set_rx_mode - NDO callback to set the netdev filters
1597 * @netdev: network interface device structure
1600 void i40e_set_rx_mode(struct net_device *netdev)
1602 static void i40e_set_rx_mode(struct net_device *netdev)
1605 struct i40e_netdev_priv *np = netdev_priv(netdev);
1606 struct i40e_mac_filter *f, *ftmp;
1607 struct i40e_vsi *vsi = np->vsi;
1608 struct netdev_hw_addr *uca;
1609 struct netdev_hw_addr *mca;
1610 struct netdev_hw_addr *ha;
1612 /* add addr if not already in the filter list */
1613 netdev_for_each_uc_addr(uca, netdev) {
1614 if (!i40e_find_mac(vsi, uca->addr, false, true)) {
1615 if (i40e_is_vsi_in_vlan(vsi))
1616 i40e_put_mac_in_vlan(vsi, uca->addr,
1619 i40e_add_filter(vsi, uca->addr, I40E_VLAN_ANY,
1624 netdev_for_each_mc_addr(mca, netdev) {
1625 if (!i40e_find_mac(vsi, mca->addr, false, true)) {
1626 if (i40e_is_vsi_in_vlan(vsi))
1627 i40e_put_mac_in_vlan(vsi, mca->addr,
1630 i40e_add_filter(vsi, mca->addr, I40E_VLAN_ANY,
1635 /* remove filter if not in netdev list */
1636 list_for_each_entry_safe(f, ftmp, &vsi->mac_filter_list, list) {
1642 if (is_multicast_ether_addr(f->macaddr)) {
1643 netdev_for_each_mc_addr(mca, netdev) {
1644 if (ether_addr_equal(mca->addr, f->macaddr)) {
1650 netdev_for_each_uc_addr(uca, netdev) {
1651 if (ether_addr_equal(uca->addr, f->macaddr)) {
1657 for_each_dev_addr(netdev, ha) {
1658 if (ether_addr_equal(ha->addr, f->macaddr)) {
1666 vsi, f->macaddr, I40E_VLAN_ANY, false, true);
1669 /* check for other flag changes */
1670 if (vsi->current_netdev_flags != vsi->netdev->flags) {
1671 vsi->flags |= I40E_VSI_FLAG_FILTER_CHANGED;
1672 vsi->back->flags |= I40E_FLAG_FILTER_SYNC;
1677 * i40e_sync_vsi_filters - Update the VSI filter list to the HW
1678 * @vsi: ptr to the VSI
1680 * Push any outstanding VSI filter changes through the AdminQ.
1682 * Returns 0 or error value
1684 int i40e_sync_vsi_filters(struct i40e_vsi *vsi)
1686 struct i40e_mac_filter *f, *ftmp;
1687 bool promisc_forced_on = false;
1688 bool add_happened = false;
1689 int filter_list_len = 0;
1690 u32 changed_flags = 0;
1691 i40e_status aq_ret = 0;
1697 /* empty array typed pointers, kcalloc later */
1698 struct i40e_aqc_add_macvlan_element_data *add_list;
1699 struct i40e_aqc_remove_macvlan_element_data *del_list;
1701 while (test_and_set_bit(__I40E_CONFIG_BUSY, &vsi->state))
1702 usleep_range(1000, 2000);
1706 changed_flags = vsi->current_netdev_flags ^ vsi->netdev->flags;
1707 vsi->current_netdev_flags = vsi->netdev->flags;
1710 if (vsi->flags & I40E_VSI_FLAG_FILTER_CHANGED) {
1711 vsi->flags &= ~I40E_VSI_FLAG_FILTER_CHANGED;
1713 filter_list_len = pf->hw.aq.asq_buf_size /
1714 sizeof(struct i40e_aqc_remove_macvlan_element_data);
1715 del_list = kcalloc(filter_list_len,
1716 sizeof(struct i40e_aqc_remove_macvlan_element_data),
1721 list_for_each_entry_safe(f, ftmp, &vsi->mac_filter_list, list) {
1725 if (f->counter != 0)
1730 /* add to delete list */
1731 ether_addr_copy(del_list[num_del].mac_addr, f->macaddr);
1732 del_list[num_del].vlan_tag =
1733 cpu_to_le16((u16)(f->vlan ==
1734 I40E_VLAN_ANY ? 0 : f->vlan));
1736 cmd_flags |= I40E_AQC_MACVLAN_DEL_PERFECT_MATCH;
1737 del_list[num_del].flags = cmd_flags;
1740 /* unlink from filter list */
1744 /* flush a full buffer */
1745 if (num_del == filter_list_len) {
1746 aq_ret = i40e_aq_remove_macvlan(&pf->hw,
1747 vsi->seid, del_list, num_del,
1750 memset(del_list, 0, sizeof(*del_list));
1753 pf->hw.aq.asq_last_status !=
1755 dev_info(&pf->pdev->dev,
1756 "ignoring delete macvlan error, err %d, aq_err %d while flushing a full buffer\n",
1758 pf->hw.aq.asq_last_status);
1762 aq_ret = i40e_aq_remove_macvlan(&pf->hw, vsi->seid,
1763 del_list, num_del, NULL);
1767 pf->hw.aq.asq_last_status != I40E_AQ_RC_ENOENT)
1768 dev_info(&pf->pdev->dev,
1769 "ignoring delete macvlan error, err %d, aq_err %d\n",
1770 aq_ret, pf->hw.aq.asq_last_status);
1776 /* do all the adds now */
1777 filter_list_len = pf->hw.aq.asq_buf_size /
1778 sizeof(struct i40e_aqc_add_macvlan_element_data),
1779 add_list = kcalloc(filter_list_len,
1780 sizeof(struct i40e_aqc_add_macvlan_element_data),
1785 list_for_each_entry_safe(f, ftmp, &vsi->mac_filter_list, list) {
1789 if (f->counter == 0)
1792 add_happened = true;
1795 /* add to add array */
1796 ether_addr_copy(add_list[num_add].mac_addr, f->macaddr);
1797 add_list[num_add].vlan_tag =
1799 (u16)(f->vlan == I40E_VLAN_ANY ? 0 : f->vlan));
1800 add_list[num_add].queue_number = 0;
1802 cmd_flags |= I40E_AQC_MACVLAN_ADD_PERFECT_MATCH;
1803 add_list[num_add].flags = cpu_to_le16(cmd_flags);
1806 /* flush a full buffer */
1807 if (num_add == filter_list_len) {
1808 aq_ret = i40e_aq_add_macvlan(&pf->hw, vsi->seid,
1815 memset(add_list, 0, sizeof(*add_list));
1819 aq_ret = i40e_aq_add_macvlan(&pf->hw, vsi->seid,
1820 add_list, num_add, NULL);
1826 if (add_happened && aq_ret &&
1827 pf->hw.aq.asq_last_status != I40E_AQ_RC_EINVAL) {
1828 dev_info(&pf->pdev->dev,
1829 "add filter failed, err %d, aq_err %d\n",
1830 aq_ret, pf->hw.aq.asq_last_status);
1831 if ((pf->hw.aq.asq_last_status == I40E_AQ_RC_ENOSPC) &&
1832 !test_bit(__I40E_FILTER_OVERFLOW_PROMISC,
1834 promisc_forced_on = true;
1835 set_bit(__I40E_FILTER_OVERFLOW_PROMISC,
1837 dev_info(&pf->pdev->dev, "promiscuous mode forced on\n");
1842 /* check for changes in promiscuous modes */
1843 if (changed_flags & IFF_ALLMULTI) {
1844 bool cur_multipromisc;
1845 cur_multipromisc = !!(vsi->current_netdev_flags & IFF_ALLMULTI);
1846 aq_ret = i40e_aq_set_vsi_multicast_promiscuous(&vsi->back->hw,
1851 dev_info(&pf->pdev->dev,
1852 "set multi promisc failed, err %d, aq_err %d\n",
1853 aq_ret, pf->hw.aq.asq_last_status);
1855 if ((changed_flags & IFF_PROMISC) || promisc_forced_on) {
1857 cur_promisc = (!!(vsi->current_netdev_flags & IFF_PROMISC) ||
1858 test_bit(__I40E_FILTER_OVERFLOW_PROMISC,
1860 aq_ret = i40e_aq_set_vsi_unicast_promiscuous(&vsi->back->hw,
1864 dev_info(&pf->pdev->dev,
1865 "set uni promisc failed, err %d, aq_err %d\n",
1866 aq_ret, pf->hw.aq.asq_last_status);
1867 aq_ret = i40e_aq_set_vsi_broadcast(&vsi->back->hw,
1871 dev_info(&pf->pdev->dev,
1872 "set brdcast promisc failed, err %d, aq_err %d\n",
1873 aq_ret, pf->hw.aq.asq_last_status);
1876 clear_bit(__I40E_CONFIG_BUSY, &vsi->state);
1881 * i40e_sync_filters_subtask - Sync the VSI filter list with HW
1882 * @pf: board private structure
1884 static void i40e_sync_filters_subtask(struct i40e_pf *pf)
1888 if (!pf || !(pf->flags & I40E_FLAG_FILTER_SYNC))
1890 pf->flags &= ~I40E_FLAG_FILTER_SYNC;
1892 for (v = 0; v < pf->num_alloc_vsi; v++) {
1894 (pf->vsi[v]->flags & I40E_VSI_FLAG_FILTER_CHANGED))
1895 i40e_sync_vsi_filters(pf->vsi[v]);
1900 * i40e_change_mtu - NDO callback to change the Maximum Transfer Unit
1901 * @netdev: network interface device structure
1902 * @new_mtu: new value for maximum frame size
1904 * Returns 0 on success, negative on failure
1906 static int i40e_change_mtu(struct net_device *netdev, int new_mtu)
1908 struct i40e_netdev_priv *np = netdev_priv(netdev);
1909 int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN + VLAN_HLEN;
1910 struct i40e_vsi *vsi = np->vsi;
1912 /* MTU < 68 is an error and causes problems on some kernels */
1913 if ((new_mtu < 68) || (max_frame > I40E_MAX_RXBUFFER))
1916 netdev_info(netdev, "changing MTU from %d to %d\n",
1917 netdev->mtu, new_mtu);
1918 netdev->mtu = new_mtu;
1919 if (netif_running(netdev))
1920 i40e_vsi_reinit_locked(vsi);
1926 * i40e_ioctl - Access the hwtstamp interface
1927 * @netdev: network interface device structure
1928 * @ifr: interface request data
1929 * @cmd: ioctl command
1931 int i40e_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
1933 struct i40e_netdev_priv *np = netdev_priv(netdev);
1934 struct i40e_pf *pf = np->vsi->back;
1938 return i40e_ptp_get_ts_config(pf, ifr);
1940 return i40e_ptp_set_ts_config(pf, ifr);
1947 * i40e_vlan_stripping_enable - Turn on vlan stripping for the VSI
1948 * @vsi: the vsi being adjusted
1950 void i40e_vlan_stripping_enable(struct i40e_vsi *vsi)
1952 struct i40e_vsi_context ctxt;
1955 if ((vsi->info.valid_sections &
1956 cpu_to_le16(I40E_AQ_VSI_PROP_VLAN_VALID)) &&
1957 ((vsi->info.port_vlan_flags & I40E_AQ_VSI_PVLAN_MODE_MASK) == 0))
1958 return; /* already enabled */
1960 vsi->info.valid_sections = cpu_to_le16(I40E_AQ_VSI_PROP_VLAN_VALID);
1961 vsi->info.port_vlan_flags = I40E_AQ_VSI_PVLAN_MODE_ALL |
1962 I40E_AQ_VSI_PVLAN_EMOD_STR_BOTH;
1964 ctxt.seid = vsi->seid;
1965 memcpy(&ctxt.info, &vsi->info, sizeof(vsi->info));
1966 ret = i40e_aq_update_vsi_params(&vsi->back->hw, &ctxt, NULL);
1968 dev_info(&vsi->back->pdev->dev,
1969 "%s: update vsi failed, aq_err=%d\n",
1970 __func__, vsi->back->hw.aq.asq_last_status);
1975 * i40e_vlan_stripping_disable - Turn off vlan stripping for the VSI
1976 * @vsi: the vsi being adjusted
1978 void i40e_vlan_stripping_disable(struct i40e_vsi *vsi)
1980 struct i40e_vsi_context ctxt;
1983 if ((vsi->info.valid_sections &
1984 cpu_to_le16(I40E_AQ_VSI_PROP_VLAN_VALID)) &&
1985 ((vsi->info.port_vlan_flags & I40E_AQ_VSI_PVLAN_EMOD_MASK) ==
1986 I40E_AQ_VSI_PVLAN_EMOD_MASK))
1987 return; /* already disabled */
1989 vsi->info.valid_sections = cpu_to_le16(I40E_AQ_VSI_PROP_VLAN_VALID);
1990 vsi->info.port_vlan_flags = I40E_AQ_VSI_PVLAN_MODE_ALL |
1991 I40E_AQ_VSI_PVLAN_EMOD_NOTHING;
1993 ctxt.seid = vsi->seid;
1994 memcpy(&ctxt.info, &vsi->info, sizeof(vsi->info));
1995 ret = i40e_aq_update_vsi_params(&vsi->back->hw, &ctxt, NULL);
1997 dev_info(&vsi->back->pdev->dev,
1998 "%s: update vsi failed, aq_err=%d\n",
1999 __func__, vsi->back->hw.aq.asq_last_status);
2004 * i40e_vlan_rx_register - Setup or shutdown vlan offload
2005 * @netdev: network interface to be adjusted
2006 * @features: netdev features to test if VLAN offload is enabled or not
2008 static void i40e_vlan_rx_register(struct net_device *netdev, u32 features)
2010 struct i40e_netdev_priv *np = netdev_priv(netdev);
2011 struct i40e_vsi *vsi = np->vsi;
2013 if (features & NETIF_F_HW_VLAN_CTAG_RX)
2014 i40e_vlan_stripping_enable(vsi);
2016 i40e_vlan_stripping_disable(vsi);
2020 * i40e_vsi_add_vlan - Add vsi membership for given vlan
2021 * @vsi: the vsi being configured
2022 * @vid: vlan id to be added (0 = untagged only , -1 = any)
2024 int i40e_vsi_add_vlan(struct i40e_vsi *vsi, s16 vid)
2026 struct i40e_mac_filter *f, *add_f;
2027 bool is_netdev, is_vf;
2029 is_vf = (vsi->type == I40E_VSI_SRIOV);
2030 is_netdev = !!(vsi->netdev);
2033 add_f = i40e_add_filter(vsi, vsi->netdev->dev_addr, vid,
2036 dev_info(&vsi->back->pdev->dev,
2037 "Could not add vlan filter %d for %pM\n",
2038 vid, vsi->netdev->dev_addr);
2043 list_for_each_entry(f, &vsi->mac_filter_list, list) {
2044 add_f = i40e_add_filter(vsi, f->macaddr, vid, is_vf, is_netdev);
2046 dev_info(&vsi->back->pdev->dev,
2047 "Could not add vlan filter %d for %pM\n",
2053 /* Now if we add a vlan tag, make sure to check if it is the first
2054 * tag (i.e. a "tag" -1 does exist) and if so replace the -1 "tag"
2055 * with 0, so we now accept untagged and specified tagged traffic
2056 * (and not any taged and untagged)
2059 if (is_netdev && i40e_find_filter(vsi, vsi->netdev->dev_addr,
2061 is_vf, is_netdev)) {
2062 i40e_del_filter(vsi, vsi->netdev->dev_addr,
2063 I40E_VLAN_ANY, is_vf, is_netdev);
2064 add_f = i40e_add_filter(vsi, vsi->netdev->dev_addr, 0,
2067 dev_info(&vsi->back->pdev->dev,
2068 "Could not add filter 0 for %pM\n",
2069 vsi->netdev->dev_addr);
2075 /* Do not assume that I40E_VLAN_ANY should be reset to VLAN 0 */
2076 if (vid > 0 && !vsi->info.pvid) {
2077 list_for_each_entry(f, &vsi->mac_filter_list, list) {
2078 if (i40e_find_filter(vsi, f->macaddr, I40E_VLAN_ANY,
2079 is_vf, is_netdev)) {
2080 i40e_del_filter(vsi, f->macaddr, I40E_VLAN_ANY,
2082 add_f = i40e_add_filter(vsi, f->macaddr,
2083 0, is_vf, is_netdev);
2085 dev_info(&vsi->back->pdev->dev,
2086 "Could not add filter 0 for %pM\n",
2094 if (test_bit(__I40E_DOWN, &vsi->back->state) ||
2095 test_bit(__I40E_RESET_RECOVERY_PENDING, &vsi->back->state))
2098 return i40e_sync_vsi_filters(vsi);
2102 * i40e_vsi_kill_vlan - Remove vsi membership for given vlan
2103 * @vsi: the vsi being configured
2104 * @vid: vlan id to be removed (0 = untagged only , -1 = any)
2106 * Return: 0 on success or negative otherwise
2108 int i40e_vsi_kill_vlan(struct i40e_vsi *vsi, s16 vid)
2110 struct net_device *netdev = vsi->netdev;
2111 struct i40e_mac_filter *f, *add_f;
2112 bool is_vf, is_netdev;
2113 int filter_count = 0;
2115 is_vf = (vsi->type == I40E_VSI_SRIOV);
2116 is_netdev = !!(netdev);
2119 i40e_del_filter(vsi, netdev->dev_addr, vid, is_vf, is_netdev);
2121 list_for_each_entry(f, &vsi->mac_filter_list, list)
2122 i40e_del_filter(vsi, f->macaddr, vid, is_vf, is_netdev);
2124 /* go through all the filters for this VSI and if there is only
2125 * vid == 0 it means there are no other filters, so vid 0 must
2126 * be replaced with -1. This signifies that we should from now
2127 * on accept any traffic (with any tag present, or untagged)
2129 list_for_each_entry(f, &vsi->mac_filter_list, list) {
2132 ether_addr_equal(netdev->dev_addr, f->macaddr))
2140 if (!filter_count && is_netdev) {
2141 i40e_del_filter(vsi, netdev->dev_addr, 0, is_vf, is_netdev);
2142 f = i40e_add_filter(vsi, netdev->dev_addr, I40E_VLAN_ANY,
2145 dev_info(&vsi->back->pdev->dev,
2146 "Could not add filter %d for %pM\n",
2147 I40E_VLAN_ANY, netdev->dev_addr);
2152 if (!filter_count) {
2153 list_for_each_entry(f, &vsi->mac_filter_list, list) {
2154 i40e_del_filter(vsi, f->macaddr, 0, is_vf, is_netdev);
2155 add_f = i40e_add_filter(vsi, f->macaddr, I40E_VLAN_ANY,
2158 dev_info(&vsi->back->pdev->dev,
2159 "Could not add filter %d for %pM\n",
2160 I40E_VLAN_ANY, f->macaddr);
2166 if (test_bit(__I40E_DOWN, &vsi->back->state) ||
2167 test_bit(__I40E_RESET_RECOVERY_PENDING, &vsi->back->state))
2170 return i40e_sync_vsi_filters(vsi);
2174 * i40e_vlan_rx_add_vid - Add a vlan id filter to HW offload
2175 * @netdev: network interface to be adjusted
2176 * @vid: vlan id to be added
2178 * net_device_ops implementation for adding vlan ids
2181 int i40e_vlan_rx_add_vid(struct net_device *netdev,
2182 __always_unused __be16 proto, u16 vid)
2184 static int i40e_vlan_rx_add_vid(struct net_device *netdev,
2185 __always_unused __be16 proto, u16 vid)
2188 struct i40e_netdev_priv *np = netdev_priv(netdev);
2189 struct i40e_vsi *vsi = np->vsi;
2195 netdev_info(netdev, "adding %pM vid=%d\n", netdev->dev_addr, vid);
2197 /* If the network stack called us with vid = 0 then
2198 * it is asking to receive priority tagged packets with
2199 * vlan id 0. Our HW receives them by default when configured
2200 * to receive untagged packets so there is no need to add an
2201 * extra filter for vlan 0 tagged packets.
2204 ret = i40e_vsi_add_vlan(vsi, vid);
2206 if (!ret && (vid < VLAN_N_VID))
2207 set_bit(vid, vsi->active_vlans);
2213 * i40e_vlan_rx_kill_vid - Remove a vlan id filter from HW offload
2214 * @netdev: network interface to be adjusted
2215 * @vid: vlan id to be removed
2217 * net_device_ops implementation for removing vlan ids
2220 int i40e_vlan_rx_kill_vid(struct net_device *netdev,
2221 __always_unused __be16 proto, u16 vid)
2223 static int i40e_vlan_rx_kill_vid(struct net_device *netdev,
2224 __always_unused __be16 proto, u16 vid)
2227 struct i40e_netdev_priv *np = netdev_priv(netdev);
2228 struct i40e_vsi *vsi = np->vsi;
2230 netdev_info(netdev, "removing %pM vid=%d\n", netdev->dev_addr, vid);
2232 /* return code is ignored as there is nothing a user
2233 * can do about failure to remove and a log message was
2234 * already printed from the other function
2236 i40e_vsi_kill_vlan(vsi, vid);
2238 clear_bit(vid, vsi->active_vlans);
2244 * i40e_restore_vlan - Reinstate vlans when vsi/netdev comes back up
2245 * @vsi: the vsi being brought back up
2247 static void i40e_restore_vlan(struct i40e_vsi *vsi)
2254 i40e_vlan_rx_register(vsi->netdev, vsi->netdev->features);
2256 for_each_set_bit(vid, vsi->active_vlans, VLAN_N_VID)
2257 i40e_vlan_rx_add_vid(vsi->netdev, htons(ETH_P_8021Q),
2262 * i40e_vsi_add_pvid - Add pvid for the VSI
2263 * @vsi: the vsi being adjusted
2264 * @vid: the vlan id to set as a PVID
2266 int i40e_vsi_add_pvid(struct i40e_vsi *vsi, u16 vid)
2268 struct i40e_vsi_context ctxt;
2271 vsi->info.valid_sections = cpu_to_le16(I40E_AQ_VSI_PROP_VLAN_VALID);
2272 vsi->info.pvid = cpu_to_le16(vid);
2273 vsi->info.port_vlan_flags = I40E_AQ_VSI_PVLAN_MODE_TAGGED |
2274 I40E_AQ_VSI_PVLAN_INSERT_PVID |
2275 I40E_AQ_VSI_PVLAN_EMOD_STR;
2277 ctxt.seid = vsi->seid;
2278 memcpy(&ctxt.info, &vsi->info, sizeof(vsi->info));
2279 aq_ret = i40e_aq_update_vsi_params(&vsi->back->hw, &ctxt, NULL);
2281 dev_info(&vsi->back->pdev->dev,
2282 "%s: update vsi failed, aq_err=%d\n",
2283 __func__, vsi->back->hw.aq.asq_last_status);
2291 * i40e_vsi_remove_pvid - Remove the pvid from the VSI
2292 * @vsi: the vsi being adjusted
2294 * Just use the vlan_rx_register() service to put it back to normal
2296 void i40e_vsi_remove_pvid(struct i40e_vsi *vsi)
2298 i40e_vlan_stripping_disable(vsi);
2304 * i40e_vsi_setup_tx_resources - Allocate VSI Tx queue resources
2305 * @vsi: ptr to the VSI
2307 * If this function returns with an error, then it's possible one or
2308 * more of the rings is populated (while the rest are not). It is the
2309 * callers duty to clean those orphaned rings.
2311 * Return 0 on success, negative on failure
2313 static int i40e_vsi_setup_tx_resources(struct i40e_vsi *vsi)
2317 for (i = 0; i < vsi->num_queue_pairs && !err; i++)
2318 err = i40e_setup_tx_descriptors(vsi->tx_rings[i]);
2324 * i40e_vsi_free_tx_resources - Free Tx resources for VSI queues
2325 * @vsi: ptr to the VSI
2327 * Free VSI's transmit software resources
2329 static void i40e_vsi_free_tx_resources(struct i40e_vsi *vsi)
2336 for (i = 0; i < vsi->num_queue_pairs; i++)
2337 if (vsi->tx_rings[i] && vsi->tx_rings[i]->desc)
2338 i40e_free_tx_resources(vsi->tx_rings[i]);
2342 * i40e_vsi_setup_rx_resources - Allocate VSI queues Rx resources
2343 * @vsi: ptr to the VSI
2345 * If this function returns with an error, then it's possible one or
2346 * more of the rings is populated (while the rest are not). It is the
2347 * callers duty to clean those orphaned rings.
2349 * Return 0 on success, negative on failure
2351 static int i40e_vsi_setup_rx_resources(struct i40e_vsi *vsi)
2355 for (i = 0; i < vsi->num_queue_pairs && !err; i++)
2356 err = i40e_setup_rx_descriptors(vsi->rx_rings[i]);
2358 i40e_fcoe_setup_ddp_resources(vsi);
2364 * i40e_vsi_free_rx_resources - Free Rx Resources for VSI queues
2365 * @vsi: ptr to the VSI
2367 * Free all receive software resources
2369 static void i40e_vsi_free_rx_resources(struct i40e_vsi *vsi)
2376 for (i = 0; i < vsi->num_queue_pairs; i++)
2377 if (vsi->rx_rings[i] && vsi->rx_rings[i]->desc)
2378 i40e_free_rx_resources(vsi->rx_rings[i]);
2380 i40e_fcoe_free_ddp_resources(vsi);
2385 * i40e_configure_tx_ring - Configure a transmit ring context and rest
2386 * @ring: The Tx ring to configure
2388 * Configure the Tx descriptor ring in the HMC context.
2390 static int i40e_configure_tx_ring(struct i40e_ring *ring)
2392 struct i40e_vsi *vsi = ring->vsi;
2393 u16 pf_q = vsi->base_queue + ring->queue_index;
2394 struct i40e_hw *hw = &vsi->back->hw;
2395 struct i40e_hmc_obj_txq tx_ctx;
2396 i40e_status err = 0;
2399 /* some ATR related tx ring init */
2400 if (vsi->back->flags & I40E_FLAG_FD_ATR_ENABLED) {
2401 ring->atr_sample_rate = vsi->back->atr_sample_rate;
2402 ring->atr_count = 0;
2404 ring->atr_sample_rate = 0;
2407 /* initialize XPS */
2408 if (ring->q_vector && ring->netdev &&
2409 vsi->tc_config.numtc <= 1 &&
2410 !test_and_set_bit(__I40E_TX_XPS_INIT_DONE, &ring->state))
2411 netif_set_xps_queue(ring->netdev,
2412 &ring->q_vector->affinity_mask,
2415 /* clear the context structure first */
2416 memset(&tx_ctx, 0, sizeof(tx_ctx));
2418 tx_ctx.new_context = 1;
2419 tx_ctx.base = (ring->dma / 128);
2420 tx_ctx.qlen = ring->count;
2421 tx_ctx.fd_ena = !!(vsi->back->flags & (I40E_FLAG_FD_SB_ENABLED |
2422 I40E_FLAG_FD_ATR_ENABLED));
2424 tx_ctx.fc_ena = (vsi->type == I40E_VSI_FCOE);
2426 tx_ctx.timesync_ena = !!(vsi->back->flags & I40E_FLAG_PTP);
2427 /* FDIR VSI tx ring can still use RS bit and writebacks */
2428 if (vsi->type != I40E_VSI_FDIR)
2429 tx_ctx.head_wb_ena = 1;
2430 tx_ctx.head_wb_addr = ring->dma +
2431 (ring->count * sizeof(struct i40e_tx_desc));
2433 /* As part of VSI creation/update, FW allocates certain
2434 * Tx arbitration queue sets for each TC enabled for
2435 * the VSI. The FW returns the handles to these queue
2436 * sets as part of the response buffer to Add VSI,
2437 * Update VSI, etc. AQ commands. It is expected that
2438 * these queue set handles be associated with the Tx
2439 * queues by the driver as part of the TX queue context
2440 * initialization. This has to be done regardless of
2441 * DCB as by default everything is mapped to TC0.
2443 tx_ctx.rdylist = le16_to_cpu(vsi->info.qs_handle[ring->dcb_tc]);
2444 tx_ctx.rdylist_act = 0;
2446 /* clear the context in the HMC */
2447 err = i40e_clear_lan_tx_queue_context(hw, pf_q);
2449 dev_info(&vsi->back->pdev->dev,
2450 "Failed to clear LAN Tx queue context on Tx ring %d (pf_q %d), error: %d\n",
2451 ring->queue_index, pf_q, err);
2455 /* set the context in the HMC */
2456 err = i40e_set_lan_tx_queue_context(hw, pf_q, &tx_ctx);
2458 dev_info(&vsi->back->pdev->dev,
2459 "Failed to set LAN Tx queue context on Tx ring %d (pf_q %d, error: %d\n",
2460 ring->queue_index, pf_q, err);
2464 /* Now associate this queue with this PCI function */
2465 if (vsi->type == I40E_VSI_VMDQ2) {
2466 qtx_ctl = I40E_QTX_CTL_VM_QUEUE;
2467 qtx_ctl |= ((vsi->id) << I40E_QTX_CTL_VFVM_INDX_SHIFT) &
2468 I40E_QTX_CTL_VFVM_INDX_MASK;
2470 qtx_ctl = I40E_QTX_CTL_PF_QUEUE;
2473 qtx_ctl |= ((hw->pf_id << I40E_QTX_CTL_PF_INDX_SHIFT) &
2474 I40E_QTX_CTL_PF_INDX_MASK);
2475 wr32(hw, I40E_QTX_CTL(pf_q), qtx_ctl);
2478 clear_bit(__I40E_HANG_CHECK_ARMED, &ring->state);
2480 /* cache tail off for easier writes later */
2481 ring->tail = hw->hw_addr + I40E_QTX_TAIL(pf_q);
2487 * i40e_configure_rx_ring - Configure a receive ring context
2488 * @ring: The Rx ring to configure
2490 * Configure the Rx descriptor ring in the HMC context.
2492 static int i40e_configure_rx_ring(struct i40e_ring *ring)
2494 struct i40e_vsi *vsi = ring->vsi;
2495 u32 chain_len = vsi->back->hw.func_caps.rx_buf_chain_len;
2496 u16 pf_q = vsi->base_queue + ring->queue_index;
2497 struct i40e_hw *hw = &vsi->back->hw;
2498 struct i40e_hmc_obj_rxq rx_ctx;
2499 i40e_status err = 0;
2503 /* clear the context structure first */
2504 memset(&rx_ctx, 0, sizeof(rx_ctx));
2506 ring->rx_buf_len = vsi->rx_buf_len;
2507 ring->rx_hdr_len = vsi->rx_hdr_len;
2509 rx_ctx.dbuff = ring->rx_buf_len >> I40E_RXQ_CTX_DBUFF_SHIFT;
2510 rx_ctx.hbuff = ring->rx_hdr_len >> I40E_RXQ_CTX_HBUFF_SHIFT;
2512 rx_ctx.base = (ring->dma / 128);
2513 rx_ctx.qlen = ring->count;
2515 if (vsi->back->flags & I40E_FLAG_16BYTE_RX_DESC_ENABLED) {
2516 set_ring_16byte_desc_enabled(ring);
2522 rx_ctx.dtype = vsi->dtype;
2524 set_ring_ps_enabled(ring);
2525 rx_ctx.hsplit_0 = I40E_RX_SPLIT_L2 |
2527 I40E_RX_SPLIT_TCP_UDP |
2530 rx_ctx.hsplit_0 = 0;
2533 rx_ctx.rxmax = min_t(u16, vsi->max_frame,
2534 (chain_len * ring->rx_buf_len));
2535 if (hw->revision_id == 0)
2536 rx_ctx.lrxqthresh = 0;
2538 rx_ctx.lrxqthresh = 2;
2539 rx_ctx.crcstrip = 1;
2543 rx_ctx.fc_ena = (vsi->type == I40E_VSI_FCOE);
2545 /* set the prefena field to 1 because the manual says to */
2548 /* clear the context in the HMC */
2549 err = i40e_clear_lan_rx_queue_context(hw, pf_q);
2551 dev_info(&vsi->back->pdev->dev,
2552 "Failed to clear LAN Rx queue context on Rx ring %d (pf_q %d), error: %d\n",
2553 ring->queue_index, pf_q, err);
2557 /* set the context in the HMC */
2558 err = i40e_set_lan_rx_queue_context(hw, pf_q, &rx_ctx);
2560 dev_info(&vsi->back->pdev->dev,
2561 "Failed to set LAN Rx queue context on Rx ring %d (pf_q %d), error: %d\n",
2562 ring->queue_index, pf_q, err);
2566 /* cache tail for quicker writes, and clear the reg before use */
2567 ring->tail = hw->hw_addr + I40E_QRX_TAIL(pf_q);
2568 writel(0, ring->tail);
2570 i40e_alloc_rx_buffers(ring, I40E_DESC_UNUSED(ring));
2576 * i40e_vsi_configure_tx - Configure the VSI for Tx
2577 * @vsi: VSI structure describing this set of rings and resources
2579 * Configure the Tx VSI for operation.
2581 static int i40e_vsi_configure_tx(struct i40e_vsi *vsi)
2586 for (i = 0; (i < vsi->num_queue_pairs) && !err; i++)
2587 err = i40e_configure_tx_ring(vsi->tx_rings[i]);
2593 * i40e_vsi_configure_rx - Configure the VSI for Rx
2594 * @vsi: the VSI being configured
2596 * Configure the Rx VSI for operation.
2598 static int i40e_vsi_configure_rx(struct i40e_vsi *vsi)
2603 if (vsi->netdev && (vsi->netdev->mtu > ETH_DATA_LEN))
2604 vsi->max_frame = vsi->netdev->mtu + ETH_HLEN
2605 + ETH_FCS_LEN + VLAN_HLEN;
2607 vsi->max_frame = I40E_RXBUFFER_2048;
2609 /* figure out correct receive buffer length */
2610 switch (vsi->back->flags & (I40E_FLAG_RX_1BUF_ENABLED |
2611 I40E_FLAG_RX_PS_ENABLED)) {
2612 case I40E_FLAG_RX_1BUF_ENABLED:
2613 vsi->rx_hdr_len = 0;
2614 vsi->rx_buf_len = vsi->max_frame;
2615 vsi->dtype = I40E_RX_DTYPE_NO_SPLIT;
2617 case I40E_FLAG_RX_PS_ENABLED:
2618 vsi->rx_hdr_len = I40E_RX_HDR_SIZE;
2619 vsi->rx_buf_len = I40E_RXBUFFER_2048;
2620 vsi->dtype = I40E_RX_DTYPE_HEADER_SPLIT;
2623 vsi->rx_hdr_len = I40E_RX_HDR_SIZE;
2624 vsi->rx_buf_len = I40E_RXBUFFER_2048;
2625 vsi->dtype = I40E_RX_DTYPE_SPLIT_ALWAYS;
2630 /* setup rx buffer for FCoE */
2631 if ((vsi->type == I40E_VSI_FCOE) &&
2632 (vsi->back->flags & I40E_FLAG_FCOE_ENABLED)) {
2633 vsi->rx_hdr_len = 0;
2634 vsi->rx_buf_len = I40E_RXBUFFER_3072;
2635 vsi->max_frame = I40E_RXBUFFER_3072;
2636 vsi->dtype = I40E_RX_DTYPE_NO_SPLIT;
2639 #endif /* I40E_FCOE */
2640 /* round up for the chip's needs */
2641 vsi->rx_hdr_len = ALIGN(vsi->rx_hdr_len,
2642 (1 << I40E_RXQ_CTX_HBUFF_SHIFT));
2643 vsi->rx_buf_len = ALIGN(vsi->rx_buf_len,
2644 (1 << I40E_RXQ_CTX_DBUFF_SHIFT));
2646 /* set up individual rings */
2647 for (i = 0; i < vsi->num_queue_pairs && !err; i++)
2648 err = i40e_configure_rx_ring(vsi->rx_rings[i]);
2654 * i40e_vsi_config_dcb_rings - Update rings to reflect DCB TC
2655 * @vsi: ptr to the VSI
2657 static void i40e_vsi_config_dcb_rings(struct i40e_vsi *vsi)
2659 struct i40e_ring *tx_ring, *rx_ring;
2660 u16 qoffset, qcount;
2663 if (!(vsi->back->flags & I40E_FLAG_DCB_ENABLED))
2666 for (n = 0; n < I40E_MAX_TRAFFIC_CLASS; n++) {
2667 if (!(vsi->tc_config.enabled_tc & (1 << n)))
2670 qoffset = vsi->tc_config.tc_info[n].qoffset;
2671 qcount = vsi->tc_config.tc_info[n].qcount;
2672 for (i = qoffset; i < (qoffset + qcount); i++) {
2673 rx_ring = vsi->rx_rings[i];
2674 tx_ring = vsi->tx_rings[i];
2675 rx_ring->dcb_tc = n;
2676 tx_ring->dcb_tc = n;
2682 * i40e_set_vsi_rx_mode - Call set_rx_mode on a VSI
2683 * @vsi: ptr to the VSI
2685 static void i40e_set_vsi_rx_mode(struct i40e_vsi *vsi)
2688 i40e_set_rx_mode(vsi->netdev);
2692 * i40e_fdir_filter_restore - Restore the Sideband Flow Director filters
2693 * @vsi: Pointer to the targeted VSI
2695 * This function replays the hlist on the hw where all the SB Flow Director
2696 * filters were saved.
2698 static void i40e_fdir_filter_restore(struct i40e_vsi *vsi)
2700 struct i40e_fdir_filter *filter;
2701 struct i40e_pf *pf = vsi->back;
2702 struct hlist_node *node;
2704 if (!(pf->flags & I40E_FLAG_FD_SB_ENABLED))
2707 hlist_for_each_entry_safe(filter, node,
2708 &pf->fdir_filter_list, fdir_node) {
2709 i40e_add_del_fdir(vsi, filter, true);
2714 * i40e_vsi_configure - Set up the VSI for action
2715 * @vsi: the VSI being configured
2717 static int i40e_vsi_configure(struct i40e_vsi *vsi)
2721 i40e_set_vsi_rx_mode(vsi);
2722 i40e_restore_vlan(vsi);
2723 i40e_vsi_config_dcb_rings(vsi);
2724 err = i40e_vsi_configure_tx(vsi);
2726 err = i40e_vsi_configure_rx(vsi);
2732 * i40e_vsi_configure_msix - MSIX mode Interrupt Config in the HW
2733 * @vsi: the VSI being configured
2735 static void i40e_vsi_configure_msix(struct i40e_vsi *vsi)
2737 struct i40e_pf *pf = vsi->back;
2738 struct i40e_q_vector *q_vector;
2739 struct i40e_hw *hw = &pf->hw;
2745 /* The interrupt indexing is offset by 1 in the PFINT_ITRn
2746 * and PFINT_LNKLSTn registers, e.g.:
2747 * PFINT_ITRn[0..n-1] gets msix-1..msix-n (qpair interrupts)
2749 qp = vsi->base_queue;
2750 vector = vsi->base_vector;
2751 for (i = 0; i < vsi->num_q_vectors; i++, vector++) {
2752 q_vector = vsi->q_vectors[i];
2753 q_vector->rx.itr = ITR_TO_REG(vsi->rx_itr_setting);
2754 q_vector->rx.latency_range = I40E_LOW_LATENCY;
2755 wr32(hw, I40E_PFINT_ITRN(I40E_RX_ITR, vector - 1),
2757 q_vector->tx.itr = ITR_TO_REG(vsi->tx_itr_setting);
2758 q_vector->tx.latency_range = I40E_LOW_LATENCY;
2759 wr32(hw, I40E_PFINT_ITRN(I40E_TX_ITR, vector - 1),
2762 /* Linked list for the queuepairs assigned to this vector */
2763 wr32(hw, I40E_PFINT_LNKLSTN(vector - 1), qp);
2764 for (q = 0; q < q_vector->num_ringpairs; q++) {
2765 val = I40E_QINT_RQCTL_CAUSE_ENA_MASK |
2766 (I40E_RX_ITR << I40E_QINT_RQCTL_ITR_INDX_SHIFT) |
2767 (vector << I40E_QINT_RQCTL_MSIX_INDX_SHIFT) |
2768 (qp << I40E_QINT_RQCTL_NEXTQ_INDX_SHIFT)|
2770 << I40E_QINT_RQCTL_NEXTQ_TYPE_SHIFT);
2772 wr32(hw, I40E_QINT_RQCTL(qp), val);
2774 val = I40E_QINT_TQCTL_CAUSE_ENA_MASK |
2775 (I40E_TX_ITR << I40E_QINT_TQCTL_ITR_INDX_SHIFT) |
2776 (vector << I40E_QINT_TQCTL_MSIX_INDX_SHIFT) |
2777 ((qp+1) << I40E_QINT_TQCTL_NEXTQ_INDX_SHIFT)|
2779 << I40E_QINT_TQCTL_NEXTQ_TYPE_SHIFT);
2781 /* Terminate the linked list */
2782 if (q == (q_vector->num_ringpairs - 1))
2783 val |= (I40E_QUEUE_END_OF_LIST
2784 << I40E_QINT_TQCTL_NEXTQ_INDX_SHIFT);
2786 wr32(hw, I40E_QINT_TQCTL(qp), val);
2795 * i40e_enable_misc_int_causes - enable the non-queue interrupts
2796 * @hw: ptr to the hardware info
2798 static void i40e_enable_misc_int_causes(struct i40e_hw *hw)
2802 /* clear things first */
2803 wr32(hw, I40E_PFINT_ICR0_ENA, 0); /* disable all */
2804 rd32(hw, I40E_PFINT_ICR0); /* read to clear */
2806 val = I40E_PFINT_ICR0_ENA_ECC_ERR_MASK |
2807 I40E_PFINT_ICR0_ENA_MAL_DETECT_MASK |
2808 I40E_PFINT_ICR0_ENA_GRST_MASK |
2809 I40E_PFINT_ICR0_ENA_PCI_EXCEPTION_MASK |
2810 I40E_PFINT_ICR0_ENA_GPIO_MASK |
2811 I40E_PFINT_ICR0_ENA_TIMESYNC_MASK |
2812 I40E_PFINT_ICR0_ENA_HMC_ERR_MASK |
2813 I40E_PFINT_ICR0_ENA_VFLR_MASK |
2814 I40E_PFINT_ICR0_ENA_ADMINQ_MASK;
2816 wr32(hw, I40E_PFINT_ICR0_ENA, val);
2818 /* SW_ITR_IDX = 0, but don't change INTENA */
2819 wr32(hw, I40E_PFINT_DYN_CTL0, I40E_PFINT_DYN_CTL0_SW_ITR_INDX_MASK |
2820 I40E_PFINT_DYN_CTL0_INTENA_MSK_MASK);
2822 /* OTHER_ITR_IDX = 0 */
2823 wr32(hw, I40E_PFINT_STAT_CTL0, 0);
2827 * i40e_configure_msi_and_legacy - Legacy mode interrupt config in the HW
2828 * @vsi: the VSI being configured
2830 static void i40e_configure_msi_and_legacy(struct i40e_vsi *vsi)
2832 struct i40e_q_vector *q_vector = vsi->q_vectors[0];
2833 struct i40e_pf *pf = vsi->back;
2834 struct i40e_hw *hw = &pf->hw;
2837 /* set the ITR configuration */
2838 q_vector->rx.itr = ITR_TO_REG(vsi->rx_itr_setting);
2839 q_vector->rx.latency_range = I40E_LOW_LATENCY;
2840 wr32(hw, I40E_PFINT_ITR0(I40E_RX_ITR), q_vector->rx.itr);
2841 q_vector->tx.itr = ITR_TO_REG(vsi->tx_itr_setting);
2842 q_vector->tx.latency_range = I40E_LOW_LATENCY;
2843 wr32(hw, I40E_PFINT_ITR0(I40E_TX_ITR), q_vector->tx.itr);
2845 i40e_enable_misc_int_causes(hw);
2847 /* FIRSTQ_INDX = 0, FIRSTQ_TYPE = 0 (rx) */
2848 wr32(hw, I40E_PFINT_LNKLST0, 0);
2850 /* Associate the queue pair to the vector and enable the queue int */
2851 val = I40E_QINT_RQCTL_CAUSE_ENA_MASK |
2852 (I40E_RX_ITR << I40E_QINT_RQCTL_ITR_INDX_SHIFT) |
2853 (I40E_QUEUE_TYPE_TX << I40E_QINT_TQCTL_NEXTQ_TYPE_SHIFT);
2855 wr32(hw, I40E_QINT_RQCTL(0), val);
2857 val = I40E_QINT_TQCTL_CAUSE_ENA_MASK |
2858 (I40E_TX_ITR << I40E_QINT_TQCTL_ITR_INDX_SHIFT) |
2859 (I40E_QUEUE_END_OF_LIST << I40E_QINT_TQCTL_NEXTQ_INDX_SHIFT);
2861 wr32(hw, I40E_QINT_TQCTL(0), val);
2866 * i40e_irq_dynamic_disable_icr0 - Disable default interrupt generation for icr0
2867 * @pf: board private structure
2869 void i40e_irq_dynamic_disable_icr0(struct i40e_pf *pf)
2871 struct i40e_hw *hw = &pf->hw;
2873 wr32(hw, I40E_PFINT_DYN_CTL0,
2874 I40E_ITR_NONE << I40E_PFINT_DYN_CTLN_ITR_INDX_SHIFT);
2879 * i40e_irq_dynamic_enable_icr0 - Enable default interrupt generation for icr0
2880 * @pf: board private structure
2882 void i40e_irq_dynamic_enable_icr0(struct i40e_pf *pf)
2884 struct i40e_hw *hw = &pf->hw;
2887 val = I40E_PFINT_DYN_CTL0_INTENA_MASK |
2888 I40E_PFINT_DYN_CTL0_CLEARPBA_MASK |
2889 (I40E_ITR_NONE << I40E_PFINT_DYN_CTL0_ITR_INDX_SHIFT);
2891 wr32(hw, I40E_PFINT_DYN_CTL0, val);
2896 * i40e_irq_dynamic_enable - Enable default interrupt generation settings
2897 * @vsi: pointer to a vsi
2898 * @vector: enable a particular Hw Interrupt vector
2900 void i40e_irq_dynamic_enable(struct i40e_vsi *vsi, int vector)
2902 struct i40e_pf *pf = vsi->back;
2903 struct i40e_hw *hw = &pf->hw;
2906 val = I40E_PFINT_DYN_CTLN_INTENA_MASK |
2907 I40E_PFINT_DYN_CTLN_CLEARPBA_MASK |
2908 (I40E_ITR_NONE << I40E_PFINT_DYN_CTLN_ITR_INDX_SHIFT);
2909 wr32(hw, I40E_PFINT_DYN_CTLN(vector - 1), val);
2910 /* skip the flush */
2914 * i40e_irq_dynamic_disable - Disable default interrupt generation settings
2915 * @vsi: pointer to a vsi
2916 * @vector: enable a particular Hw Interrupt vector
2918 void i40e_irq_dynamic_disable(struct i40e_vsi *vsi, int vector)
2920 struct i40e_pf *pf = vsi->back;
2921 struct i40e_hw *hw = &pf->hw;
2924 val = I40E_ITR_NONE << I40E_PFINT_DYN_CTLN_ITR_INDX_SHIFT;
2925 wr32(hw, I40E_PFINT_DYN_CTLN(vector - 1), val);
2930 * i40e_msix_clean_rings - MSIX mode Interrupt Handler
2931 * @irq: interrupt number
2932 * @data: pointer to a q_vector
2934 static irqreturn_t i40e_msix_clean_rings(int irq, void *data)
2936 struct i40e_q_vector *q_vector = data;
2938 if (!q_vector->tx.ring && !q_vector->rx.ring)
2941 napi_schedule(&q_vector->napi);
2947 * i40e_vsi_request_irq_msix - Initialize MSI-X interrupts
2948 * @vsi: the VSI being configured
2949 * @basename: name for the vector
2951 * Allocates MSI-X vectors and requests interrupts from the kernel.
2953 static int i40e_vsi_request_irq_msix(struct i40e_vsi *vsi, char *basename)
2955 int q_vectors = vsi->num_q_vectors;
2956 struct i40e_pf *pf = vsi->back;
2957 int base = vsi->base_vector;
2962 for (vector = 0; vector < q_vectors; vector++) {
2963 struct i40e_q_vector *q_vector = vsi->q_vectors[vector];
2965 if (q_vector->tx.ring && q_vector->rx.ring) {
2966 snprintf(q_vector->name, sizeof(q_vector->name) - 1,
2967 "%s-%s-%d", basename, "TxRx", rx_int_idx++);
2969 } else if (q_vector->rx.ring) {
2970 snprintf(q_vector->name, sizeof(q_vector->name) - 1,
2971 "%s-%s-%d", basename, "rx", rx_int_idx++);
2972 } else if (q_vector->tx.ring) {
2973 snprintf(q_vector->name, sizeof(q_vector->name) - 1,
2974 "%s-%s-%d", basename, "tx", tx_int_idx++);
2976 /* skip this unused q_vector */
2979 err = request_irq(pf->msix_entries[base + vector].vector,
2985 dev_info(&pf->pdev->dev,
2986 "%s: request_irq failed, error: %d\n",
2988 goto free_queue_irqs;
2990 /* assign the mask for this irq */
2991 irq_set_affinity_hint(pf->msix_entries[base + vector].vector,
2992 &q_vector->affinity_mask);
2995 vsi->irqs_ready = true;
3001 irq_set_affinity_hint(pf->msix_entries[base + vector].vector,
3003 free_irq(pf->msix_entries[base + vector].vector,
3004 &(vsi->q_vectors[vector]));
3010 * i40e_vsi_disable_irq - Mask off queue interrupt generation on the VSI
3011 * @vsi: the VSI being un-configured
3013 static void i40e_vsi_disable_irq(struct i40e_vsi *vsi)
3015 struct i40e_pf *pf = vsi->back;
3016 struct i40e_hw *hw = &pf->hw;
3017 int base = vsi->base_vector;
3020 for (i = 0; i < vsi->num_queue_pairs; i++) {
3021 wr32(hw, I40E_QINT_TQCTL(vsi->tx_rings[i]->reg_idx), 0);
3022 wr32(hw, I40E_QINT_RQCTL(vsi->rx_rings[i]->reg_idx), 0);
3025 if (pf->flags & I40E_FLAG_MSIX_ENABLED) {
3026 for (i = vsi->base_vector;
3027 i < (vsi->num_q_vectors + vsi->base_vector); i++)
3028 wr32(hw, I40E_PFINT_DYN_CTLN(i - 1), 0);
3031 for (i = 0; i < vsi->num_q_vectors; i++)
3032 synchronize_irq(pf->msix_entries[i + base].vector);
3034 /* Legacy and MSI mode - this stops all interrupt handling */
3035 wr32(hw, I40E_PFINT_ICR0_ENA, 0);
3036 wr32(hw, I40E_PFINT_DYN_CTL0, 0);
3038 synchronize_irq(pf->pdev->irq);
3043 * i40e_vsi_enable_irq - Enable IRQ for the given VSI
3044 * @vsi: the VSI being configured
3046 static int i40e_vsi_enable_irq(struct i40e_vsi *vsi)
3048 struct i40e_pf *pf = vsi->back;
3051 if (pf->flags & I40E_FLAG_MSIX_ENABLED) {
3052 for (i = vsi->base_vector;
3053 i < (vsi->num_q_vectors + vsi->base_vector); i++)
3054 i40e_irq_dynamic_enable(vsi, i);
3056 i40e_irq_dynamic_enable_icr0(pf);
3059 i40e_flush(&pf->hw);
3064 * i40e_stop_misc_vector - Stop the vector that handles non-queue events
3065 * @pf: board private structure
3067 static void i40e_stop_misc_vector(struct i40e_pf *pf)
3070 wr32(&pf->hw, I40E_PFINT_ICR0_ENA, 0);
3071 i40e_flush(&pf->hw);
3075 * i40e_intr - MSI/Legacy and non-queue interrupt handler
3076 * @irq: interrupt number
3077 * @data: pointer to a q_vector
3079 * This is the handler used for all MSI/Legacy interrupts, and deals
3080 * with both queue and non-queue interrupts. This is also used in
3081 * MSIX mode to handle the non-queue interrupts.
3083 static irqreturn_t i40e_intr(int irq, void *data)
3085 struct i40e_pf *pf = (struct i40e_pf *)data;
3086 struct i40e_hw *hw = &pf->hw;
3087 irqreturn_t ret = IRQ_NONE;
3088 u32 icr0, icr0_remaining;
3091 icr0 = rd32(hw, I40E_PFINT_ICR0);
3092 ena_mask = rd32(hw, I40E_PFINT_ICR0_ENA);
3094 /* if sharing a legacy IRQ, we might get called w/o an intr pending */
3095 if ((icr0 & I40E_PFINT_ICR0_INTEVENT_MASK) == 0)
3098 /* if interrupt but no bits showing, must be SWINT */
3099 if (((icr0 & ~I40E_PFINT_ICR0_INTEVENT_MASK) == 0) ||
3100 (icr0 & I40E_PFINT_ICR0_SWINT_MASK))
3103 /* only q0 is used in MSI/Legacy mode, and none are used in MSIX */
3104 if (icr0 & I40E_PFINT_ICR0_QUEUE_0_MASK) {
3106 /* temporarily disable queue cause for NAPI processing */
3107 u32 qval = rd32(hw, I40E_QINT_RQCTL(0));
3108 qval &= ~I40E_QINT_RQCTL_CAUSE_ENA_MASK;
3109 wr32(hw, I40E_QINT_RQCTL(0), qval);
3111 qval = rd32(hw, I40E_QINT_TQCTL(0));
3112 qval &= ~I40E_QINT_TQCTL_CAUSE_ENA_MASK;
3113 wr32(hw, I40E_QINT_TQCTL(0), qval);
3115 if (!test_bit(__I40E_DOWN, &pf->state))
3116 napi_schedule(&pf->vsi[pf->lan_vsi]->q_vectors[0]->napi);
3119 if (icr0 & I40E_PFINT_ICR0_ADMINQ_MASK) {
3120 ena_mask &= ~I40E_PFINT_ICR0_ENA_ADMINQ_MASK;
3121 set_bit(__I40E_ADMINQ_EVENT_PENDING, &pf->state);
3124 if (icr0 & I40E_PFINT_ICR0_MAL_DETECT_MASK) {
3125 ena_mask &= ~I40E_PFINT_ICR0_ENA_MAL_DETECT_MASK;
3126 set_bit(__I40E_MDD_EVENT_PENDING, &pf->state);
3129 if (icr0 & I40E_PFINT_ICR0_VFLR_MASK) {
3130 ena_mask &= ~I40E_PFINT_ICR0_ENA_VFLR_MASK;
3131 set_bit(__I40E_VFLR_EVENT_PENDING, &pf->state);
3134 if (icr0 & I40E_PFINT_ICR0_GRST_MASK) {
3135 if (!test_bit(__I40E_RESET_RECOVERY_PENDING, &pf->state))
3136 set_bit(__I40E_RESET_INTR_RECEIVED, &pf->state);
3137 ena_mask &= ~I40E_PFINT_ICR0_ENA_GRST_MASK;
3138 val = rd32(hw, I40E_GLGEN_RSTAT);
3139 val = (val & I40E_GLGEN_RSTAT_RESET_TYPE_MASK)
3140 >> I40E_GLGEN_RSTAT_RESET_TYPE_SHIFT;
3141 if (val == I40E_RESET_CORER) {
3143 } else if (val == I40E_RESET_GLOBR) {
3145 } else if (val == I40E_RESET_EMPR) {
3147 set_bit(__I40E_EMP_RESET_REQUESTED, &pf->state);
3151 if (icr0 & I40E_PFINT_ICR0_HMC_ERR_MASK) {
3152 icr0 &= ~I40E_PFINT_ICR0_HMC_ERR_MASK;
3153 dev_info(&pf->pdev->dev, "HMC error interrupt\n");
3156 if (icr0 & I40E_PFINT_ICR0_TIMESYNC_MASK) {
3157 u32 prttsyn_stat = rd32(hw, I40E_PRTTSYN_STAT_0);
3159 if (prttsyn_stat & I40E_PRTTSYN_STAT_0_TXTIME_MASK) {
3160 icr0 &= ~I40E_PFINT_ICR0_ENA_TIMESYNC_MASK;
3161 i40e_ptp_tx_hwtstamp(pf);
3165 /* If a critical error is pending we have no choice but to reset the
3167 * Report and mask out any remaining unexpected interrupts.
3169 icr0_remaining = icr0 & ena_mask;
3170 if (icr0_remaining) {
3171 dev_info(&pf->pdev->dev, "unhandled interrupt icr0=0x%08x\n",
3173 if ((icr0_remaining & I40E_PFINT_ICR0_PE_CRITERR_MASK) ||
3174 (icr0_remaining & I40E_PFINT_ICR0_PCI_EXCEPTION_MASK) ||
3175 (icr0_remaining & I40E_PFINT_ICR0_ECC_ERR_MASK)) {
3176 dev_info(&pf->pdev->dev, "device will be reset\n");
3177 set_bit(__I40E_PF_RESET_REQUESTED, &pf->state);
3178 i40e_service_event_schedule(pf);
3180 ena_mask &= ~icr0_remaining;
3185 /* re-enable interrupt causes */
3186 wr32(hw, I40E_PFINT_ICR0_ENA, ena_mask);
3187 if (!test_bit(__I40E_DOWN, &pf->state)) {
3188 i40e_service_event_schedule(pf);
3189 i40e_irq_dynamic_enable_icr0(pf);
3196 * i40e_clean_fdir_tx_irq - Reclaim resources after transmit completes
3197 * @tx_ring: tx ring to clean
3198 * @budget: how many cleans we're allowed
3200 * Returns true if there's any budget left (e.g. the clean is finished)
3202 static bool i40e_clean_fdir_tx_irq(struct i40e_ring *tx_ring, int budget)
3204 struct i40e_vsi *vsi = tx_ring->vsi;
3205 u16 i = tx_ring->next_to_clean;
3206 struct i40e_tx_buffer *tx_buf;
3207 struct i40e_tx_desc *tx_desc;
3209 tx_buf = &tx_ring->tx_bi[i];
3210 tx_desc = I40E_TX_DESC(tx_ring, i);
3211 i -= tx_ring->count;
3214 struct i40e_tx_desc *eop_desc = tx_buf->next_to_watch;
3216 /* if next_to_watch is not set then there is no work pending */
3220 /* prevent any other reads prior to eop_desc */
3221 read_barrier_depends();
3223 /* if the descriptor isn't done, no work yet to do */
3224 if (!(eop_desc->cmd_type_offset_bsz &
3225 cpu_to_le64(I40E_TX_DESC_DTYPE_DESC_DONE)))
3228 /* clear next_to_watch to prevent false hangs */
3229 tx_buf->next_to_watch = NULL;
3231 tx_desc->buffer_addr = 0;
3232 tx_desc->cmd_type_offset_bsz = 0;
3233 /* move past filter desc */
3238 i -= tx_ring->count;
3239 tx_buf = tx_ring->tx_bi;
3240 tx_desc = I40E_TX_DESC(tx_ring, 0);
3242 /* unmap skb header data */
3243 dma_unmap_single(tx_ring->dev,
3244 dma_unmap_addr(tx_buf, dma),
3245 dma_unmap_len(tx_buf, len),
3247 if (tx_buf->tx_flags & I40E_TX_FLAGS_FD_SB)
3248 kfree(tx_buf->raw_buf);
3250 tx_buf->raw_buf = NULL;
3251 tx_buf->tx_flags = 0;
3252 tx_buf->next_to_watch = NULL;
3253 dma_unmap_len_set(tx_buf, len, 0);
3254 tx_desc->buffer_addr = 0;
3255 tx_desc->cmd_type_offset_bsz = 0;
3257 /* move us past the eop_desc for start of next FD desc */
3262 i -= tx_ring->count;
3263 tx_buf = tx_ring->tx_bi;
3264 tx_desc = I40E_TX_DESC(tx_ring, 0);
3267 /* update budget accounting */
3269 } while (likely(budget));
3271 i += tx_ring->count;
3272 tx_ring->next_to_clean = i;
3274 if (vsi->back->flags & I40E_FLAG_MSIX_ENABLED) {
3275 i40e_irq_dynamic_enable(vsi,
3276 tx_ring->q_vector->v_idx + vsi->base_vector);
3282 * i40e_fdir_clean_ring - Interrupt Handler for FDIR SB ring
3283 * @irq: interrupt number
3284 * @data: pointer to a q_vector
3286 static irqreturn_t i40e_fdir_clean_ring(int irq, void *data)
3288 struct i40e_q_vector *q_vector = data;
3289 struct i40e_vsi *vsi;
3291 if (!q_vector->tx.ring)
3294 vsi = q_vector->tx.ring->vsi;
3295 i40e_clean_fdir_tx_irq(q_vector->tx.ring, vsi->work_limit);
3301 * i40e_map_vector_to_qp - Assigns the queue pair to the vector
3302 * @vsi: the VSI being configured
3303 * @v_idx: vector index
3304 * @qp_idx: queue pair index
3306 static void map_vector_to_qp(struct i40e_vsi *vsi, int v_idx, int qp_idx)
3308 struct i40e_q_vector *q_vector = vsi->q_vectors[v_idx];
3309 struct i40e_ring *tx_ring = vsi->tx_rings[qp_idx];
3310 struct i40e_ring *rx_ring = vsi->rx_rings[qp_idx];
3312 tx_ring->q_vector = q_vector;
3313 tx_ring->next = q_vector->tx.ring;
3314 q_vector->tx.ring = tx_ring;
3315 q_vector->tx.count++;
3317 rx_ring->q_vector = q_vector;
3318 rx_ring->next = q_vector->rx.ring;
3319 q_vector->rx.ring = rx_ring;
3320 q_vector->rx.count++;
3324 * i40e_vsi_map_rings_to_vectors - Maps descriptor rings to vectors
3325 * @vsi: the VSI being configured
3327 * This function maps descriptor rings to the queue-specific vectors
3328 * we were allotted through the MSI-X enabling code. Ideally, we'd have
3329 * one vector per queue pair, but on a constrained vector budget, we
3330 * group the queue pairs as "efficiently" as possible.
3332 static void i40e_vsi_map_rings_to_vectors(struct i40e_vsi *vsi)
3334 int qp_remaining = vsi->num_queue_pairs;
3335 int q_vectors = vsi->num_q_vectors;
3340 /* If we don't have enough vectors for a 1-to-1 mapping, we'll have to
3341 * group them so there are multiple queues per vector.
3342 * It is also important to go through all the vectors available to be
3343 * sure that if we don't use all the vectors, that the remaining vectors
3344 * are cleared. This is especially important when decreasing the
3345 * number of queues in use.
3347 for (; v_start < q_vectors; v_start++) {
3348 struct i40e_q_vector *q_vector = vsi->q_vectors[v_start];
3350 num_ringpairs = DIV_ROUND_UP(qp_remaining, q_vectors - v_start);
3352 q_vector->num_ringpairs = num_ringpairs;
3354 q_vector->rx.count = 0;
3355 q_vector->tx.count = 0;
3356 q_vector->rx.ring = NULL;
3357 q_vector->tx.ring = NULL;
3359 while (num_ringpairs--) {
3360 map_vector_to_qp(vsi, v_start, qp_idx);
3368 * i40e_vsi_request_irq - Request IRQ from the OS
3369 * @vsi: the VSI being configured
3370 * @basename: name for the vector
3372 static int i40e_vsi_request_irq(struct i40e_vsi *vsi, char *basename)
3374 struct i40e_pf *pf = vsi->back;
3377 if (pf->flags & I40E_FLAG_MSIX_ENABLED)
3378 err = i40e_vsi_request_irq_msix(vsi, basename);
3379 else if (pf->flags & I40E_FLAG_MSI_ENABLED)
3380 err = request_irq(pf->pdev->irq, i40e_intr, 0,
3381 pf->misc_int_name, pf);
3383 err = request_irq(pf->pdev->irq, i40e_intr, IRQF_SHARED,
3384 pf->misc_int_name, pf);
3387 dev_info(&pf->pdev->dev, "request_irq failed, Error %d\n", err);
3392 #ifdef CONFIG_NET_POLL_CONTROLLER
3394 * i40e_netpoll - A Polling 'interrupt'handler
3395 * @netdev: network interface device structure
3397 * This is used by netconsole to send skbs without having to re-enable
3398 * interrupts. It's not called while the normal interrupt routine is executing.
3401 void i40e_netpoll(struct net_device *netdev)
3403 static void i40e_netpoll(struct net_device *netdev)
3406 struct i40e_netdev_priv *np = netdev_priv(netdev);
3407 struct i40e_vsi *vsi = np->vsi;
3408 struct i40e_pf *pf = vsi->back;
3411 /* if interface is down do nothing */
3412 if (test_bit(__I40E_DOWN, &vsi->state))
3415 pf->flags |= I40E_FLAG_IN_NETPOLL;
3416 if (pf->flags & I40E_FLAG_MSIX_ENABLED) {
3417 for (i = 0; i < vsi->num_q_vectors; i++)
3418 i40e_msix_clean_rings(0, vsi->q_vectors[i]);
3420 i40e_intr(pf->pdev->irq, netdev);
3422 pf->flags &= ~I40E_FLAG_IN_NETPOLL;
3427 * i40e_pf_txq_wait - Wait for a PF's Tx queue to be enabled or disabled
3428 * @pf: the PF being configured
3429 * @pf_q: the PF queue
3430 * @enable: enable or disable state of the queue
3432 * This routine will wait for the given Tx queue of the PF to reach the
3433 * enabled or disabled state.
3434 * Returns -ETIMEDOUT in case of failing to reach the requested state after
3435 * multiple retries; else will return 0 in case of success.
3437 static int i40e_pf_txq_wait(struct i40e_pf *pf, int pf_q, bool enable)
3442 for (i = 0; i < I40E_QUEUE_WAIT_RETRY_LIMIT; i++) {
3443 tx_reg = rd32(&pf->hw, I40E_QTX_ENA(pf_q));
3444 if (enable == !!(tx_reg & I40E_QTX_ENA_QENA_STAT_MASK))
3447 usleep_range(10, 20);
3449 if (i >= I40E_QUEUE_WAIT_RETRY_LIMIT)
3456 * i40e_vsi_control_tx - Start or stop a VSI's rings
3457 * @vsi: the VSI being configured
3458 * @enable: start or stop the rings
3460 static int i40e_vsi_control_tx(struct i40e_vsi *vsi, bool enable)
3462 struct i40e_pf *pf = vsi->back;
3463 struct i40e_hw *hw = &pf->hw;
3464 int i, j, pf_q, ret = 0;
3467 pf_q = vsi->base_queue;
3468 for (i = 0; i < vsi->num_queue_pairs; i++, pf_q++) {
3470 /* warn the TX unit of coming changes */
3471 i40e_pre_tx_queue_cfg(&pf->hw, pf_q, enable);
3473 usleep_range(10, 20);
3475 for (j = 0; j < 50; j++) {
3476 tx_reg = rd32(hw, I40E_QTX_ENA(pf_q));
3477 if (((tx_reg >> I40E_QTX_ENA_QENA_REQ_SHIFT) & 1) ==
3478 ((tx_reg >> I40E_QTX_ENA_QENA_STAT_SHIFT) & 1))
3480 usleep_range(1000, 2000);
3482 /* Skip if the queue is already in the requested state */
3483 if (enable == !!(tx_reg & I40E_QTX_ENA_QENA_STAT_MASK))
3486 /* turn on/off the queue */
3488 wr32(hw, I40E_QTX_HEAD(pf_q), 0);
3489 tx_reg |= I40E_QTX_ENA_QENA_REQ_MASK;
3491 tx_reg &= ~I40E_QTX_ENA_QENA_REQ_MASK;
3494 wr32(hw, I40E_QTX_ENA(pf_q), tx_reg);
3496 /* wait for the change to finish */
3497 ret = i40e_pf_txq_wait(pf, pf_q, enable);
3499 dev_info(&pf->pdev->dev,
3500 "%s: VSI seid %d Tx ring %d %sable timeout\n",
3501 __func__, vsi->seid, pf_q,
3502 (enable ? "en" : "dis"));
3507 if (hw->revision_id == 0)
3513 * i40e_pf_rxq_wait - Wait for a PF's Rx queue to be enabled or disabled
3514 * @pf: the PF being configured
3515 * @pf_q: the PF queue
3516 * @enable: enable or disable state of the queue
3518 * This routine will wait for the given Rx queue of the PF to reach the
3519 * enabled or disabled state.
3520 * Returns -ETIMEDOUT in case of failing to reach the requested state after
3521 * multiple retries; else will return 0 in case of success.
3523 static int i40e_pf_rxq_wait(struct i40e_pf *pf, int pf_q, bool enable)
3528 for (i = 0; i < I40E_QUEUE_WAIT_RETRY_LIMIT; i++) {
3529 rx_reg = rd32(&pf->hw, I40E_QRX_ENA(pf_q));
3530 if (enable == !!(rx_reg & I40E_QRX_ENA_QENA_STAT_MASK))
3533 usleep_range(10, 20);
3535 if (i >= I40E_QUEUE_WAIT_RETRY_LIMIT)
3542 * i40e_vsi_control_rx - Start or stop a VSI's rings
3543 * @vsi: the VSI being configured
3544 * @enable: start or stop the rings
3546 static int i40e_vsi_control_rx(struct i40e_vsi *vsi, bool enable)
3548 struct i40e_pf *pf = vsi->back;
3549 struct i40e_hw *hw = &pf->hw;
3550 int i, j, pf_q, ret = 0;
3553 pf_q = vsi->base_queue;
3554 for (i = 0; i < vsi->num_queue_pairs; i++, pf_q++) {
3555 for (j = 0; j < 50; j++) {
3556 rx_reg = rd32(hw, I40E_QRX_ENA(pf_q));
3557 if (((rx_reg >> I40E_QRX_ENA_QENA_REQ_SHIFT) & 1) ==
3558 ((rx_reg >> I40E_QRX_ENA_QENA_STAT_SHIFT) & 1))
3560 usleep_range(1000, 2000);
3563 /* Skip if the queue is already in the requested state */
3564 if (enable == !!(rx_reg & I40E_QRX_ENA_QENA_STAT_MASK))
3567 /* turn on/off the queue */
3569 rx_reg |= I40E_QRX_ENA_QENA_REQ_MASK;
3571 rx_reg &= ~I40E_QRX_ENA_QENA_REQ_MASK;
3572 wr32(hw, I40E_QRX_ENA(pf_q), rx_reg);
3574 /* wait for the change to finish */
3575 ret = i40e_pf_rxq_wait(pf, pf_q, enable);
3577 dev_info(&pf->pdev->dev,
3578 "%s: VSI seid %d Rx ring %d %sable timeout\n",
3579 __func__, vsi->seid, pf_q,
3580 (enable ? "en" : "dis"));
3589 * i40e_vsi_control_rings - Start or stop a VSI's rings
3590 * @vsi: the VSI being configured
3591 * @enable: start or stop the rings
3593 int i40e_vsi_control_rings(struct i40e_vsi *vsi, bool request)
3597 /* do rx first for enable and last for disable */
3599 ret = i40e_vsi_control_rx(vsi, request);
3602 ret = i40e_vsi_control_tx(vsi, request);
3604 /* Ignore return value, we need to shutdown whatever we can */
3605 i40e_vsi_control_tx(vsi, request);
3606 i40e_vsi_control_rx(vsi, request);
3613 * i40e_vsi_free_irq - Free the irq association with the OS
3614 * @vsi: the VSI being configured
3616 static void i40e_vsi_free_irq(struct i40e_vsi *vsi)
3618 struct i40e_pf *pf = vsi->back;
3619 struct i40e_hw *hw = &pf->hw;
3620 int base = vsi->base_vector;
3624 if (pf->flags & I40E_FLAG_MSIX_ENABLED) {
3625 if (!vsi->q_vectors)
3628 if (!vsi->irqs_ready)
3631 vsi->irqs_ready = false;
3632 for (i = 0; i < vsi->num_q_vectors; i++) {
3633 u16 vector = i + base;
3635 /* free only the irqs that were actually requested */
3636 if (!vsi->q_vectors[i] ||
3637 !vsi->q_vectors[i]->num_ringpairs)
3640 /* clear the affinity_mask in the IRQ descriptor */
3641 irq_set_affinity_hint(pf->msix_entries[vector].vector,
3643 free_irq(pf->msix_entries[vector].vector,
3646 /* Tear down the interrupt queue link list
3648 * We know that they come in pairs and always
3649 * the Rx first, then the Tx. To clear the
3650 * link list, stick the EOL value into the
3651 * next_q field of the registers.
3653 val = rd32(hw, I40E_PFINT_LNKLSTN(vector - 1));
3654 qp = (val & I40E_PFINT_LNKLSTN_FIRSTQ_INDX_MASK)
3655 >> I40E_PFINT_LNKLSTN_FIRSTQ_INDX_SHIFT;
3656 val |= I40E_QUEUE_END_OF_LIST
3657 << I40E_PFINT_LNKLSTN_FIRSTQ_INDX_SHIFT;
3658 wr32(hw, I40E_PFINT_LNKLSTN(vector - 1), val);
3660 while (qp != I40E_QUEUE_END_OF_LIST) {
3663 val = rd32(hw, I40E_QINT_RQCTL(qp));
3665 val &= ~(I40E_QINT_RQCTL_MSIX_INDX_MASK |
3666 I40E_QINT_RQCTL_MSIX0_INDX_MASK |
3667 I40E_QINT_RQCTL_CAUSE_ENA_MASK |
3668 I40E_QINT_RQCTL_INTEVENT_MASK);
3670 val |= (I40E_QINT_RQCTL_ITR_INDX_MASK |
3671 I40E_QINT_RQCTL_NEXTQ_INDX_MASK);
3673 wr32(hw, I40E_QINT_RQCTL(qp), val);
3675 val = rd32(hw, I40E_QINT_TQCTL(qp));
3677 next = (val & I40E_QINT_TQCTL_NEXTQ_INDX_MASK)
3678 >> I40E_QINT_TQCTL_NEXTQ_INDX_SHIFT;
3680 val &= ~(I40E_QINT_TQCTL_MSIX_INDX_MASK |
3681 I40E_QINT_TQCTL_MSIX0_INDX_MASK |
3682 I40E_QINT_TQCTL_CAUSE_ENA_MASK |
3683 I40E_QINT_TQCTL_INTEVENT_MASK);
3685 val |= (I40E_QINT_TQCTL_ITR_INDX_MASK |
3686 I40E_QINT_TQCTL_NEXTQ_INDX_MASK);
3688 wr32(hw, I40E_QINT_TQCTL(qp), val);
3693 free_irq(pf->pdev->irq, pf);
3695 val = rd32(hw, I40E_PFINT_LNKLST0);
3696 qp = (val & I40E_PFINT_LNKLSTN_FIRSTQ_INDX_MASK)
3697 >> I40E_PFINT_LNKLSTN_FIRSTQ_INDX_SHIFT;
3698 val |= I40E_QUEUE_END_OF_LIST
3699 << I40E_PFINT_LNKLST0_FIRSTQ_INDX_SHIFT;
3700 wr32(hw, I40E_PFINT_LNKLST0, val);
3702 val = rd32(hw, I40E_QINT_RQCTL(qp));
3703 val &= ~(I40E_QINT_RQCTL_MSIX_INDX_MASK |
3704 I40E_QINT_RQCTL_MSIX0_INDX_MASK |
3705 I40E_QINT_RQCTL_CAUSE_ENA_MASK |
3706 I40E_QINT_RQCTL_INTEVENT_MASK);
3708 val |= (I40E_QINT_RQCTL_ITR_INDX_MASK |
3709 I40E_QINT_RQCTL_NEXTQ_INDX_MASK);
3711 wr32(hw, I40E_QINT_RQCTL(qp), val);
3713 val = rd32(hw, I40E_QINT_TQCTL(qp));
3715 val &= ~(I40E_QINT_TQCTL_MSIX_INDX_MASK |
3716 I40E_QINT_TQCTL_MSIX0_INDX_MASK |
3717 I40E_QINT_TQCTL_CAUSE_ENA_MASK |
3718 I40E_QINT_TQCTL_INTEVENT_MASK);
3720 val |= (I40E_QINT_TQCTL_ITR_INDX_MASK |
3721 I40E_QINT_TQCTL_NEXTQ_INDX_MASK);
3723 wr32(hw, I40E_QINT_TQCTL(qp), val);
3728 * i40e_free_q_vector - Free memory allocated for specific interrupt vector
3729 * @vsi: the VSI being configured
3730 * @v_idx: Index of vector to be freed
3732 * This function frees the memory allocated to the q_vector. In addition if
3733 * NAPI is enabled it will delete any references to the NAPI struct prior
3734 * to freeing the q_vector.
3736 static void i40e_free_q_vector(struct i40e_vsi *vsi, int v_idx)
3738 struct i40e_q_vector *q_vector = vsi->q_vectors[v_idx];
3739 struct i40e_ring *ring;
3744 /* disassociate q_vector from rings */
3745 i40e_for_each_ring(ring, q_vector->tx)
3746 ring->q_vector = NULL;
3748 i40e_for_each_ring(ring, q_vector->rx)
3749 ring->q_vector = NULL;
3751 /* only VSI w/ an associated netdev is set up w/ NAPI */
3753 netif_napi_del(&q_vector->napi);
3755 vsi->q_vectors[v_idx] = NULL;
3757 kfree_rcu(q_vector, rcu);
3761 * i40e_vsi_free_q_vectors - Free memory allocated for interrupt vectors
3762 * @vsi: the VSI being un-configured
3764 * This frees the memory allocated to the q_vectors and
3765 * deletes references to the NAPI struct.
3767 static void i40e_vsi_free_q_vectors(struct i40e_vsi *vsi)
3771 for (v_idx = 0; v_idx < vsi->num_q_vectors; v_idx++)
3772 i40e_free_q_vector(vsi, v_idx);
3776 * i40e_reset_interrupt_capability - Disable interrupt setup in OS
3777 * @pf: board private structure
3779 static void i40e_reset_interrupt_capability(struct i40e_pf *pf)
3781 /* If we're in Legacy mode, the interrupt was cleaned in vsi_close */
3782 if (pf->flags & I40E_FLAG_MSIX_ENABLED) {
3783 pci_disable_msix(pf->pdev);
3784 kfree(pf->msix_entries);
3785 pf->msix_entries = NULL;
3786 } else if (pf->flags & I40E_FLAG_MSI_ENABLED) {
3787 pci_disable_msi(pf->pdev);
3789 pf->flags &= ~(I40E_FLAG_MSIX_ENABLED | I40E_FLAG_MSI_ENABLED);
3793 * i40e_clear_interrupt_scheme - Clear the current interrupt scheme settings
3794 * @pf: board private structure
3796 * We go through and clear interrupt specific resources and reset the structure
3797 * to pre-load conditions
3799 static void i40e_clear_interrupt_scheme(struct i40e_pf *pf)
3803 i40e_put_lump(pf->irq_pile, 0, I40E_PILE_VALID_BIT-1);
3804 for (i = 0; i < pf->num_alloc_vsi; i++)
3806 i40e_vsi_free_q_vectors(pf->vsi[i]);
3807 i40e_reset_interrupt_capability(pf);
3811 * i40e_napi_enable_all - Enable NAPI for all q_vectors in the VSI
3812 * @vsi: the VSI being configured
3814 static void i40e_napi_enable_all(struct i40e_vsi *vsi)
3821 for (q_idx = 0; q_idx < vsi->num_q_vectors; q_idx++)
3822 napi_enable(&vsi->q_vectors[q_idx]->napi);
3826 * i40e_napi_disable_all - Disable NAPI for all q_vectors in the VSI
3827 * @vsi: the VSI being configured
3829 static void i40e_napi_disable_all(struct i40e_vsi *vsi)
3836 for (q_idx = 0; q_idx < vsi->num_q_vectors; q_idx++)
3837 napi_disable(&vsi->q_vectors[q_idx]->napi);
3841 * i40e_vsi_close - Shut down a VSI
3842 * @vsi: the vsi to be quelled
3844 static void i40e_vsi_close(struct i40e_vsi *vsi)
3846 if (!test_and_set_bit(__I40E_DOWN, &vsi->state))
3848 i40e_vsi_free_irq(vsi);
3849 i40e_vsi_free_tx_resources(vsi);
3850 i40e_vsi_free_rx_resources(vsi);
3854 * i40e_quiesce_vsi - Pause a given VSI
3855 * @vsi: the VSI being paused
3857 static void i40e_quiesce_vsi(struct i40e_vsi *vsi)
3859 if (test_bit(__I40E_DOWN, &vsi->state))
3862 set_bit(__I40E_NEEDS_RESTART, &vsi->state);
3863 if (vsi->netdev && netif_running(vsi->netdev)) {
3864 vsi->netdev->netdev_ops->ndo_stop(vsi->netdev);
3866 i40e_vsi_close(vsi);
3871 * i40e_unquiesce_vsi - Resume a given VSI
3872 * @vsi: the VSI being resumed
3874 static void i40e_unquiesce_vsi(struct i40e_vsi *vsi)
3876 if (!test_bit(__I40E_NEEDS_RESTART, &vsi->state))
3879 clear_bit(__I40E_NEEDS_RESTART, &vsi->state);
3880 if (vsi->netdev && netif_running(vsi->netdev))
3881 vsi->netdev->netdev_ops->ndo_open(vsi->netdev);
3883 i40e_vsi_open(vsi); /* this clears the DOWN bit */
3887 * i40e_pf_quiesce_all_vsi - Pause all VSIs on a PF
3890 static void i40e_pf_quiesce_all_vsi(struct i40e_pf *pf)
3894 for (v = 0; v < pf->num_alloc_vsi; v++) {
3896 i40e_quiesce_vsi(pf->vsi[v]);
3901 * i40e_pf_unquiesce_all_vsi - Resume all VSIs on a PF
3904 static void i40e_pf_unquiesce_all_vsi(struct i40e_pf *pf)
3908 for (v = 0; v < pf->num_alloc_vsi; v++) {
3910 i40e_unquiesce_vsi(pf->vsi[v]);
3915 * i40e_dcb_get_num_tc - Get the number of TCs from DCBx config
3916 * @dcbcfg: the corresponding DCBx configuration structure
3918 * Return the number of TCs from given DCBx configuration
3920 static u8 i40e_dcb_get_num_tc(struct i40e_dcbx_config *dcbcfg)
3925 /* Scan the ETS Config Priority Table to find
3926 * traffic class enabled for a given priority
3927 * and use the traffic class index to get the
3928 * number of traffic classes enabled
3930 for (i = 0; i < I40E_MAX_USER_PRIORITY; i++) {
3931 if (dcbcfg->etscfg.prioritytable[i] > num_tc)
3932 num_tc = dcbcfg->etscfg.prioritytable[i];
3935 /* Traffic class index starts from zero so
3936 * increment to return the actual count
3942 * i40e_dcb_get_enabled_tc - Get enabled traffic classes
3943 * @dcbcfg: the corresponding DCBx configuration structure
3945 * Query the current DCB configuration and return the number of
3946 * traffic classes enabled from the given DCBX config
3948 static u8 i40e_dcb_get_enabled_tc(struct i40e_dcbx_config *dcbcfg)
3950 u8 num_tc = i40e_dcb_get_num_tc(dcbcfg);
3954 for (i = 0; i < num_tc; i++)
3955 enabled_tc |= 1 << i;
3961 * i40e_pf_get_num_tc - Get enabled traffic classes for PF
3962 * @pf: PF being queried
3964 * Return number of traffic classes enabled for the given PF
3966 static u8 i40e_pf_get_num_tc(struct i40e_pf *pf)
3968 struct i40e_hw *hw = &pf->hw;
3971 struct i40e_dcbx_config *dcbcfg = &hw->local_dcbx_config;
3973 /* If DCB is not enabled then always in single TC */
3974 if (!(pf->flags & I40E_FLAG_DCB_ENABLED))
3977 /* MFP mode return count of enabled TCs for this PF */
3978 if (pf->flags & I40E_FLAG_MFP_ENABLED) {
3979 enabled_tc = pf->hw.func_caps.enabled_tcmap;
3980 for (i = 0; i < I40E_MAX_TRAFFIC_CLASS; i++) {
3981 if (enabled_tc & (1 << i))
3987 /* SFP mode will be enabled for all TCs on port */
3988 return i40e_dcb_get_num_tc(dcbcfg);
3992 * i40e_pf_get_default_tc - Get bitmap for first enabled TC
3993 * @pf: PF being queried
3995 * Return a bitmap for first enabled traffic class for this PF.
3997 static u8 i40e_pf_get_default_tc(struct i40e_pf *pf)
3999 u8 enabled_tc = pf->hw.func_caps.enabled_tcmap;
4003 return 0x1; /* TC0 */
4005 /* Find the first enabled TC */
4006 for (i = 0; i < I40E_MAX_TRAFFIC_CLASS; i++) {
4007 if (enabled_tc & (1 << i))
4015 * i40e_pf_get_pf_tc_map - Get bitmap for enabled traffic classes
4016 * @pf: PF being queried
4018 * Return a bitmap for enabled traffic classes for this PF.
4020 static u8 i40e_pf_get_tc_map(struct i40e_pf *pf)
4022 /* If DCB is not enabled for this PF then just return default TC */
4023 if (!(pf->flags & I40E_FLAG_DCB_ENABLED))
4024 return i40e_pf_get_default_tc(pf);
4026 /* MFP mode will have enabled TCs set by FW */
4027 if (pf->flags & I40E_FLAG_MFP_ENABLED)
4028 return pf->hw.func_caps.enabled_tcmap;
4030 /* SFP mode we want PF to be enabled for all TCs */
4031 return i40e_dcb_get_enabled_tc(&pf->hw.local_dcbx_config);
4035 * i40e_vsi_get_bw_info - Query VSI BW Information
4036 * @vsi: the VSI being queried
4038 * Returns 0 on success, negative value on failure
4040 static int i40e_vsi_get_bw_info(struct i40e_vsi *vsi)
4042 struct i40e_aqc_query_vsi_ets_sla_config_resp bw_ets_config = {0};
4043 struct i40e_aqc_query_vsi_bw_config_resp bw_config = {0};
4044 struct i40e_pf *pf = vsi->back;
4045 struct i40e_hw *hw = &pf->hw;
4050 /* Get the VSI level BW configuration */
4051 aq_ret = i40e_aq_query_vsi_bw_config(hw, vsi->seid, &bw_config, NULL);
4053 dev_info(&pf->pdev->dev,
4054 "couldn't get pf vsi bw config, err %d, aq_err %d\n",
4055 aq_ret, pf->hw.aq.asq_last_status);
4059 /* Get the VSI level BW configuration per TC */
4060 aq_ret = i40e_aq_query_vsi_ets_sla_config(hw, vsi->seid, &bw_ets_config,
4063 dev_info(&pf->pdev->dev,
4064 "couldn't get pf vsi ets bw config, err %d, aq_err %d\n",
4065 aq_ret, pf->hw.aq.asq_last_status);
4069 if (bw_config.tc_valid_bits != bw_ets_config.tc_valid_bits) {
4070 dev_info(&pf->pdev->dev,
4071 "Enabled TCs mismatch from querying VSI BW info 0x%08x 0x%08x\n",
4072 bw_config.tc_valid_bits,
4073 bw_ets_config.tc_valid_bits);
4074 /* Still continuing */
4077 vsi->bw_limit = le16_to_cpu(bw_config.port_bw_limit);
4078 vsi->bw_max_quanta = bw_config.max_bw;
4079 tc_bw_max = le16_to_cpu(bw_ets_config.tc_bw_max[0]) |
4080 (le16_to_cpu(bw_ets_config.tc_bw_max[1]) << 16);
4081 for (i = 0; i < I40E_MAX_TRAFFIC_CLASS; i++) {
4082 vsi->bw_ets_share_credits[i] = bw_ets_config.share_credits[i];
4083 vsi->bw_ets_limit_credits[i] =
4084 le16_to_cpu(bw_ets_config.credits[i]);
4085 /* 3 bits out of 4 for each TC */
4086 vsi->bw_ets_max_quanta[i] = (u8)((tc_bw_max >> (i*4)) & 0x7);
4093 * i40e_vsi_configure_bw_alloc - Configure VSI BW allocation per TC
4094 * @vsi: the VSI being configured
4095 * @enabled_tc: TC bitmap
4096 * @bw_credits: BW shared credits per TC
4098 * Returns 0 on success, negative value on failure
4100 static int i40e_vsi_configure_bw_alloc(struct i40e_vsi *vsi, u8 enabled_tc,
4103 struct i40e_aqc_configure_vsi_tc_bw_data bw_data;
4107 bw_data.tc_valid_bits = enabled_tc;
4108 for (i = 0; i < I40E_MAX_TRAFFIC_CLASS; i++)
4109 bw_data.tc_bw_credits[i] = bw_share[i];
4111 aq_ret = i40e_aq_config_vsi_tc_bw(&vsi->back->hw, vsi->seid, &bw_data,
4114 dev_info(&vsi->back->pdev->dev,
4115 "AQ command Config VSI BW allocation per TC failed = %d\n",
4116 vsi->back->hw.aq.asq_last_status);
4120 for (i = 0; i < I40E_MAX_TRAFFIC_CLASS; i++)
4121 vsi->info.qs_handle[i] = bw_data.qs_handles[i];
4127 * i40e_vsi_config_netdev_tc - Setup the netdev TC configuration
4128 * @vsi: the VSI being configured
4129 * @enabled_tc: TC map to be enabled
4132 static void i40e_vsi_config_netdev_tc(struct i40e_vsi *vsi, u8 enabled_tc)
4134 struct net_device *netdev = vsi->netdev;
4135 struct i40e_pf *pf = vsi->back;
4136 struct i40e_hw *hw = &pf->hw;
4139 struct i40e_dcbx_config *dcbcfg = &hw->local_dcbx_config;
4145 netdev_reset_tc(netdev);
4149 /* Set up actual enabled TCs on the VSI */
4150 if (netdev_set_num_tc(netdev, vsi->tc_config.numtc))
4153 /* set per TC queues for the VSI */
4154 for (i = 0; i < I40E_MAX_TRAFFIC_CLASS; i++) {
4155 /* Only set TC queues for enabled tcs
4157 * e.g. For a VSI that has TC0 and TC3 enabled the
4158 * enabled_tc bitmap would be 0x00001001; the driver
4159 * will set the numtc for netdev as 2 that will be
4160 * referenced by the netdev layer as TC 0 and 1.
4162 if (vsi->tc_config.enabled_tc & (1 << i))
4163 netdev_set_tc_queue(netdev,
4164 vsi->tc_config.tc_info[i].netdev_tc,
4165 vsi->tc_config.tc_info[i].qcount,
4166 vsi->tc_config.tc_info[i].qoffset);
4169 /* Assign UP2TC map for the VSI */
4170 for (i = 0; i < I40E_MAX_USER_PRIORITY; i++) {
4171 /* Get the actual TC# for the UP */
4172 u8 ets_tc = dcbcfg->etscfg.prioritytable[i];
4173 /* Get the mapped netdev TC# for the UP */
4174 netdev_tc = vsi->tc_config.tc_info[ets_tc].netdev_tc;
4175 netdev_set_prio_tc_map(netdev, i, netdev_tc);
4180 * i40e_vsi_update_queue_map - Update our copy of VSi info with new queue map
4181 * @vsi: the VSI being configured
4182 * @ctxt: the ctxt buffer returned from AQ VSI update param command
4184 static void i40e_vsi_update_queue_map(struct i40e_vsi *vsi,
4185 struct i40e_vsi_context *ctxt)
4187 /* copy just the sections touched not the entire info
4188 * since not all sections are valid as returned by
4191 vsi->info.mapping_flags = ctxt->info.mapping_flags;
4192 memcpy(&vsi->info.queue_mapping,
4193 &ctxt->info.queue_mapping, sizeof(vsi->info.queue_mapping));
4194 memcpy(&vsi->info.tc_mapping, ctxt->info.tc_mapping,
4195 sizeof(vsi->info.tc_mapping));
4199 * i40e_vsi_config_tc - Configure VSI Tx Scheduler for given TC map
4200 * @vsi: VSI to be configured
4201 * @enabled_tc: TC bitmap
4203 * This configures a particular VSI for TCs that are mapped to the
4204 * given TC bitmap. It uses default bandwidth share for TCs across
4205 * VSIs to configure TC for a particular VSI.
4208 * It is expected that the VSI queues have been quisced before calling
4211 static int i40e_vsi_config_tc(struct i40e_vsi *vsi, u8 enabled_tc)
4213 u8 bw_share[I40E_MAX_TRAFFIC_CLASS] = {0};
4214 struct i40e_vsi_context ctxt;
4218 /* Check if enabled_tc is same as existing or new TCs */
4219 if (vsi->tc_config.enabled_tc == enabled_tc)
4222 /* Enable ETS TCs with equal BW Share for now across all VSIs */
4223 for (i = 0; i < I40E_MAX_TRAFFIC_CLASS; i++) {
4224 if (enabled_tc & (1 << i))
4228 ret = i40e_vsi_configure_bw_alloc(vsi, enabled_tc, bw_share);
4230 dev_info(&vsi->back->pdev->dev,
4231 "Failed configuring TC map %d for VSI %d\n",
4232 enabled_tc, vsi->seid);
4236 /* Update Queue Pairs Mapping for currently enabled UPs */
4237 ctxt.seid = vsi->seid;
4238 ctxt.pf_num = vsi->back->hw.pf_id;
4240 ctxt.uplink_seid = vsi->uplink_seid;
4241 memcpy(&ctxt.info, &vsi->info, sizeof(vsi->info));
4242 i40e_vsi_setup_queue_map(vsi, &ctxt, enabled_tc, false);
4244 /* Update the VSI after updating the VSI queue-mapping information */
4245 ret = i40e_aq_update_vsi_params(&vsi->back->hw, &ctxt, NULL);
4247 dev_info(&vsi->back->pdev->dev,
4248 "update vsi failed, aq_err=%d\n",
4249 vsi->back->hw.aq.asq_last_status);
4252 /* update the local VSI info with updated queue map */
4253 i40e_vsi_update_queue_map(vsi, &ctxt);
4254 vsi->info.valid_sections = 0;
4256 /* Update current VSI BW information */
4257 ret = i40e_vsi_get_bw_info(vsi);
4259 dev_info(&vsi->back->pdev->dev,
4260 "Failed updating vsi bw info, aq_err=%d\n",
4261 vsi->back->hw.aq.asq_last_status);
4265 /* Update the netdev TC setup */
4266 i40e_vsi_config_netdev_tc(vsi, enabled_tc);
4272 * i40e_veb_config_tc - Configure TCs for given VEB
4274 * @enabled_tc: TC bitmap
4276 * Configures given TC bitmap for VEB (switching) element
4278 int i40e_veb_config_tc(struct i40e_veb *veb, u8 enabled_tc)
4280 struct i40e_aqc_configure_switching_comp_bw_config_data bw_data = {0};
4281 struct i40e_pf *pf = veb->pf;
4285 /* No TCs or already enabled TCs just return */
4286 if (!enabled_tc || veb->enabled_tc == enabled_tc)
4289 bw_data.tc_valid_bits = enabled_tc;
4290 /* bw_data.absolute_credits is not set (relative) */
4292 /* Enable ETS TCs with equal BW Share for now */
4293 for (i = 0; i < I40E_MAX_TRAFFIC_CLASS; i++) {
4294 if (enabled_tc & (1 << i))
4295 bw_data.tc_bw_share_credits[i] = 1;
4298 ret = i40e_aq_config_switch_comp_bw_config(&pf->hw, veb->seid,
4301 dev_info(&pf->pdev->dev,
4302 "veb bw config failed, aq_err=%d\n",
4303 pf->hw.aq.asq_last_status);
4307 /* Update the BW information */
4308 ret = i40e_veb_get_bw_info(veb);
4310 dev_info(&pf->pdev->dev,
4311 "Failed getting veb bw config, aq_err=%d\n",
4312 pf->hw.aq.asq_last_status);
4319 #ifdef CONFIG_I40E_DCB
4321 * i40e_dcb_reconfigure - Reconfigure all VEBs and VSIs
4324 * Reconfigure VEB/VSIs on a given PF; it is assumed that
4325 * the caller would've quiesce all the VSIs before calling
4328 static void i40e_dcb_reconfigure(struct i40e_pf *pf)
4334 /* Enable the TCs available on PF to all VEBs */
4335 tc_map = i40e_pf_get_tc_map(pf);
4336 for (v = 0; v < I40E_MAX_VEB; v++) {
4339 ret = i40e_veb_config_tc(pf->veb[v], tc_map);
4341 dev_info(&pf->pdev->dev,
4342 "Failed configuring TC for VEB seid=%d\n",
4344 /* Will try to configure as many components */
4348 /* Update each VSI */
4349 for (v = 0; v < pf->num_alloc_vsi; v++) {
4353 /* - Enable all TCs for the LAN VSI
4355 * - For FCoE VSI only enable the TC configured
4356 * as per the APP TLV
4358 * - For all others keep them at TC0 for now
4360 if (v == pf->lan_vsi)
4361 tc_map = i40e_pf_get_tc_map(pf);
4363 tc_map = i40e_pf_get_default_tc(pf);
4365 if (pf->vsi[v]->type == I40E_VSI_FCOE)
4366 tc_map = i40e_get_fcoe_tc_map(pf);
4367 #endif /* #ifdef I40E_FCOE */
4369 ret = i40e_vsi_config_tc(pf->vsi[v], tc_map);
4371 dev_info(&pf->pdev->dev,
4372 "Failed configuring TC for VSI seid=%d\n",
4374 /* Will try to configure as many components */
4376 /* Re-configure VSI vectors based on updated TC map */
4377 i40e_vsi_map_rings_to_vectors(pf->vsi[v]);
4378 if (pf->vsi[v]->netdev)
4379 i40e_dcbnl_set_all(pf->vsi[v]);
4385 * i40e_resume_port_tx - Resume port Tx
4388 * Resume a port's Tx and issue a PF reset in case of failure to
4391 static int i40e_resume_port_tx(struct i40e_pf *pf)
4393 struct i40e_hw *hw = &pf->hw;
4396 ret = i40e_aq_resume_port_tx(hw, NULL);
4398 dev_info(&pf->pdev->dev,
4399 "AQ command Resume Port Tx failed = %d\n",
4400 pf->hw.aq.asq_last_status);
4401 /* Schedule PF reset to recover */
4402 set_bit(__I40E_PF_RESET_REQUESTED, &pf->state);
4403 i40e_service_event_schedule(pf);
4410 * i40e_init_pf_dcb - Initialize DCB configuration
4411 * @pf: PF being configured
4413 * Query the current DCB configuration and cache it
4414 * in the hardware structure
4416 static int i40e_init_pf_dcb(struct i40e_pf *pf)
4418 struct i40e_hw *hw = &pf->hw;
4421 if (pf->hw.func_caps.npar_enable)
4424 /* Get the initial DCB configuration */
4425 err = i40e_init_dcb(hw);
4427 /* Device/Function is not DCBX capable */
4428 if ((!hw->func_caps.dcb) ||
4429 (hw->dcbx_status == I40E_DCBX_STATUS_DISABLED)) {
4430 dev_info(&pf->pdev->dev,
4431 "DCBX offload is not supported or is disabled for this PF.\n");
4433 if (pf->flags & I40E_FLAG_MFP_ENABLED)
4437 /* When status is not DISABLED then DCBX in FW */
4438 pf->dcbx_cap = DCB_CAP_DCBX_LLD_MANAGED |
4439 DCB_CAP_DCBX_VER_IEEE;
4441 pf->flags |= I40E_FLAG_DCB_CAPABLE;
4442 /* Enable DCB tagging only when more than one TC */
4443 if (i40e_dcb_get_num_tc(&hw->local_dcbx_config) > 1)
4444 pf->flags |= I40E_FLAG_DCB_ENABLED;
4445 dev_dbg(&pf->pdev->dev,
4446 "DCBX offload is supported for this PF.\n");
4449 dev_info(&pf->pdev->dev, "AQ Querying DCB configuration failed: %d\n",
4450 pf->hw.aq.asq_last_status);
4456 #endif /* CONFIG_I40E_DCB */
4457 #define SPEED_SIZE 14
4460 * i40e_print_link_message - print link up or down
4461 * @vsi: the VSI for which link needs a message
4463 static void i40e_print_link_message(struct i40e_vsi *vsi, bool isup)
4465 char speed[SPEED_SIZE] = "Unknown";
4466 char fc[FC_SIZE] = "RX/TX";
4469 netdev_info(vsi->netdev, "NIC Link is Down\n");
4473 switch (vsi->back->hw.phy.link_info.link_speed) {
4474 case I40E_LINK_SPEED_40GB:
4475 strlcpy(speed, "40 Gbps", SPEED_SIZE);
4477 case I40E_LINK_SPEED_10GB:
4478 strlcpy(speed, "10 Gbps", SPEED_SIZE);
4480 case I40E_LINK_SPEED_1GB:
4481 strlcpy(speed, "1000 Mbps", SPEED_SIZE);
4483 case I40E_LINK_SPEED_100MB:
4484 strncpy(speed, "100 Mbps", SPEED_SIZE);
4490 switch (vsi->back->hw.fc.current_mode) {
4492 strlcpy(fc, "RX/TX", FC_SIZE);
4494 case I40E_FC_TX_PAUSE:
4495 strlcpy(fc, "TX", FC_SIZE);
4497 case I40E_FC_RX_PAUSE:
4498 strlcpy(fc, "RX", FC_SIZE);
4501 strlcpy(fc, "None", FC_SIZE);
4505 netdev_info(vsi->netdev, "NIC Link is Up %s Full Duplex, Flow Control: %s\n",
4510 * i40e_up_complete - Finish the last steps of bringing up a connection
4511 * @vsi: the VSI being configured
4513 static int i40e_up_complete(struct i40e_vsi *vsi)
4515 struct i40e_pf *pf = vsi->back;
4518 if (pf->flags & I40E_FLAG_MSIX_ENABLED)
4519 i40e_vsi_configure_msix(vsi);
4521 i40e_configure_msi_and_legacy(vsi);
4524 err = i40e_vsi_control_rings(vsi, true);
4528 clear_bit(__I40E_DOWN, &vsi->state);
4529 i40e_napi_enable_all(vsi);
4530 i40e_vsi_enable_irq(vsi);
4532 if ((pf->hw.phy.link_info.link_info & I40E_AQ_LINK_UP) &&
4534 i40e_print_link_message(vsi, true);
4535 netif_tx_start_all_queues(vsi->netdev);
4536 netif_carrier_on(vsi->netdev);
4537 } else if (vsi->netdev) {
4538 i40e_print_link_message(vsi, false);
4539 /* need to check for qualified module here*/
4540 if ((pf->hw.phy.link_info.link_info &
4541 I40E_AQ_MEDIA_AVAILABLE) &&
4542 (!(pf->hw.phy.link_info.an_info &
4543 I40E_AQ_QUALIFIED_MODULE)))
4544 netdev_err(vsi->netdev,
4545 "the driver failed to link because an unqualified module was detected.");
4548 /* replay FDIR SB filters */
4549 if (vsi->type == I40E_VSI_FDIR) {
4550 /* reset fd counters */
4551 pf->fd_add_err = pf->fd_atr_cnt = 0;
4552 if (pf->fd_tcp_rule > 0) {
4553 pf->flags &= ~I40E_FLAG_FD_ATR_ENABLED;
4554 dev_info(&pf->pdev->dev, "Forcing ATR off, sideband rules for TCP/IPv4 exist\n");
4555 pf->fd_tcp_rule = 0;
4557 i40e_fdir_filter_restore(vsi);
4559 i40e_service_event_schedule(pf);
4565 * i40e_vsi_reinit_locked - Reset the VSI
4566 * @vsi: the VSI being configured
4568 * Rebuild the ring structs after some configuration
4569 * has changed, e.g. MTU size.
4571 static void i40e_vsi_reinit_locked(struct i40e_vsi *vsi)
4573 struct i40e_pf *pf = vsi->back;
4575 WARN_ON(in_interrupt());
4576 while (test_and_set_bit(__I40E_CONFIG_BUSY, &pf->state))
4577 usleep_range(1000, 2000);
4580 /* Give a VF some time to respond to the reset. The
4581 * two second wait is based upon the watchdog cycle in
4584 if (vsi->type == I40E_VSI_SRIOV)
4587 clear_bit(__I40E_CONFIG_BUSY, &pf->state);
4591 * i40e_up - Bring the connection back up after being down
4592 * @vsi: the VSI being configured
4594 int i40e_up(struct i40e_vsi *vsi)
4598 err = i40e_vsi_configure(vsi);
4600 err = i40e_up_complete(vsi);
4606 * i40e_down - Shutdown the connection processing
4607 * @vsi: the VSI being stopped
4609 void i40e_down(struct i40e_vsi *vsi)
4613 /* It is assumed that the caller of this function
4614 * sets the vsi->state __I40E_DOWN bit.
4617 netif_carrier_off(vsi->netdev);
4618 netif_tx_disable(vsi->netdev);
4620 i40e_vsi_disable_irq(vsi);
4621 i40e_vsi_control_rings(vsi, false);
4622 i40e_napi_disable_all(vsi);
4624 for (i = 0; i < vsi->num_queue_pairs; i++) {
4625 i40e_clean_tx_ring(vsi->tx_rings[i]);
4626 i40e_clean_rx_ring(vsi->rx_rings[i]);
4631 * i40e_setup_tc - configure multiple traffic classes
4632 * @netdev: net device to configure
4633 * @tc: number of traffic classes to enable
4636 int i40e_setup_tc(struct net_device *netdev, u8 tc)
4638 static int i40e_setup_tc(struct net_device *netdev, u8 tc)
4641 struct i40e_netdev_priv *np = netdev_priv(netdev);
4642 struct i40e_vsi *vsi = np->vsi;
4643 struct i40e_pf *pf = vsi->back;
4648 /* Check if DCB enabled to continue */
4649 if (!(pf->flags & I40E_FLAG_DCB_ENABLED)) {
4650 netdev_info(netdev, "DCB is not enabled for adapter\n");
4654 /* Check if MFP enabled */
4655 if (pf->flags & I40E_FLAG_MFP_ENABLED) {
4656 netdev_info(netdev, "Configuring TC not supported in MFP mode\n");
4660 /* Check whether tc count is within enabled limit */
4661 if (tc > i40e_pf_get_num_tc(pf)) {
4662 netdev_info(netdev, "TC count greater than enabled on link for adapter\n");
4666 /* Generate TC map for number of tc requested */
4667 for (i = 0; i < tc; i++)
4668 enabled_tc |= (1 << i);
4670 /* Requesting same TC configuration as already enabled */
4671 if (enabled_tc == vsi->tc_config.enabled_tc)
4674 /* Quiesce VSI queues */
4675 i40e_quiesce_vsi(vsi);
4677 /* Configure VSI for enabled TCs */
4678 ret = i40e_vsi_config_tc(vsi, enabled_tc);
4680 netdev_info(netdev, "Failed configuring TC for VSI seid=%d\n",
4686 i40e_unquiesce_vsi(vsi);
4693 * i40e_open - Called when a network interface is made active
4694 * @netdev: network interface device structure
4696 * The open entry point is called when a network interface is made
4697 * active by the system (IFF_UP). At this point all resources needed
4698 * for transmit and receive operations are allocated, the interrupt
4699 * handler is registered with the OS, the netdev watchdog subtask is
4700 * enabled, and the stack is notified that the interface is ready.
4702 * Returns 0 on success, negative value on failure
4705 int i40e_open(struct net_device *netdev)
4707 static int i40e_open(struct net_device *netdev)
4710 struct i40e_netdev_priv *np = netdev_priv(netdev);
4711 struct i40e_vsi *vsi = np->vsi;
4712 struct i40e_pf *pf = vsi->back;
4715 /* disallow open during test or if eeprom is broken */
4716 if (test_bit(__I40E_TESTING, &pf->state) ||
4717 test_bit(__I40E_BAD_EEPROM, &pf->state))
4720 netif_carrier_off(netdev);
4722 err = i40e_vsi_open(vsi);
4726 /* configure global TSO hardware offload settings */
4727 wr32(&pf->hw, I40E_GLLAN_TSOMSK_F, be32_to_cpu(TCP_FLAG_PSH |
4728 TCP_FLAG_FIN) >> 16);
4729 wr32(&pf->hw, I40E_GLLAN_TSOMSK_M, be32_to_cpu(TCP_FLAG_PSH |
4731 TCP_FLAG_CWR) >> 16);
4732 wr32(&pf->hw, I40E_GLLAN_TSOMSK_L, be32_to_cpu(TCP_FLAG_CWR) >> 16);
4734 #ifdef CONFIG_I40E_VXLAN
4735 vxlan_get_rx_port(netdev);
4743 * @vsi: the VSI to open
4745 * Finish initialization of the VSI.
4747 * Returns 0 on success, negative value on failure
4749 int i40e_vsi_open(struct i40e_vsi *vsi)
4751 struct i40e_pf *pf = vsi->back;
4752 char int_name[IFNAMSIZ];
4755 /* allocate descriptors */
4756 err = i40e_vsi_setup_tx_resources(vsi);
4759 err = i40e_vsi_setup_rx_resources(vsi);
4763 err = i40e_vsi_configure(vsi);
4768 snprintf(int_name, sizeof(int_name) - 1, "%s-%s",
4769 dev_driver_string(&pf->pdev->dev), vsi->netdev->name);
4770 err = i40e_vsi_request_irq(vsi, int_name);
4774 /* Notify the stack of the actual queue counts. */
4775 err = netif_set_real_num_tx_queues(vsi->netdev,
4776 vsi->num_queue_pairs);
4778 goto err_set_queues;
4780 err = netif_set_real_num_rx_queues(vsi->netdev,
4781 vsi->num_queue_pairs);
4783 goto err_set_queues;
4785 } else if (vsi->type == I40E_VSI_FDIR) {
4786 snprintf(int_name, sizeof(int_name) - 1, "%s-fdir",
4787 dev_driver_string(&pf->pdev->dev));
4788 err = i40e_vsi_request_irq(vsi, int_name);
4794 err = i40e_up_complete(vsi);
4796 goto err_up_complete;
4803 i40e_vsi_free_irq(vsi);
4805 i40e_vsi_free_rx_resources(vsi);
4807 i40e_vsi_free_tx_resources(vsi);
4808 if (vsi == pf->vsi[pf->lan_vsi])
4809 i40e_do_reset(pf, (1 << __I40E_PF_RESET_REQUESTED));
4815 * i40e_fdir_filter_exit - Cleans up the Flow Director accounting
4816 * @pf: Pointer to pf
4818 * This function destroys the hlist where all the Flow Director
4819 * filters were saved.
4821 static void i40e_fdir_filter_exit(struct i40e_pf *pf)
4823 struct i40e_fdir_filter *filter;
4824 struct hlist_node *node2;
4826 hlist_for_each_entry_safe(filter, node2,
4827 &pf->fdir_filter_list, fdir_node) {
4828 hlist_del(&filter->fdir_node);
4831 pf->fdir_pf_active_filters = 0;
4835 * i40e_close - Disables a network interface
4836 * @netdev: network interface device structure
4838 * The close entry point is called when an interface is de-activated
4839 * by the OS. The hardware is still under the driver's control, but
4840 * this netdev interface is disabled.
4842 * Returns 0, this is not allowed to fail
4845 int i40e_close(struct net_device *netdev)
4847 static int i40e_close(struct net_device *netdev)
4850 struct i40e_netdev_priv *np = netdev_priv(netdev);
4851 struct i40e_vsi *vsi = np->vsi;
4853 i40e_vsi_close(vsi);
4859 * i40e_do_reset - Start a PF or Core Reset sequence
4860 * @pf: board private structure
4861 * @reset_flags: which reset is requested
4863 * The essential difference in resets is that the PF Reset
4864 * doesn't clear the packet buffers, doesn't reset the PE
4865 * firmware, and doesn't bother the other PFs on the chip.
4867 void i40e_do_reset(struct i40e_pf *pf, u32 reset_flags)
4871 WARN_ON(in_interrupt());
4873 if (i40e_check_asq_alive(&pf->hw))
4874 i40e_vc_notify_reset(pf);
4876 /* do the biggest reset indicated */
4877 if (reset_flags & (1 << __I40E_GLOBAL_RESET_REQUESTED)) {
4879 /* Request a Global Reset
4881 * This will start the chip's countdown to the actual full
4882 * chip reset event, and a warning interrupt to be sent
4883 * to all PFs, including the requestor. Our handler
4884 * for the warning interrupt will deal with the shutdown
4885 * and recovery of the switch setup.
4887 dev_dbg(&pf->pdev->dev, "GlobalR requested\n");
4888 val = rd32(&pf->hw, I40E_GLGEN_RTRIG);
4889 val |= I40E_GLGEN_RTRIG_GLOBR_MASK;
4890 wr32(&pf->hw, I40E_GLGEN_RTRIG, val);
4892 } else if (reset_flags & (1 << __I40E_CORE_RESET_REQUESTED)) {
4894 /* Request a Core Reset
4896 * Same as Global Reset, except does *not* include the MAC/PHY
4898 dev_dbg(&pf->pdev->dev, "CoreR requested\n");
4899 val = rd32(&pf->hw, I40E_GLGEN_RTRIG);
4900 val |= I40E_GLGEN_RTRIG_CORER_MASK;
4901 wr32(&pf->hw, I40E_GLGEN_RTRIG, val);
4902 i40e_flush(&pf->hw);
4904 } else if (reset_flags & (1 << __I40E_EMP_RESET_REQUESTED)) {
4906 /* Request a Firmware Reset
4908 * Same as Global reset, plus restarting the
4909 * embedded firmware engine.
4911 /* enable EMP Reset */
4912 val = rd32(&pf->hw, I40E_GLGEN_RSTENA_EMP);
4913 val |= I40E_GLGEN_RSTENA_EMP_EMP_RST_ENA_MASK;
4914 wr32(&pf->hw, I40E_GLGEN_RSTENA_EMP, val);
4916 /* force the reset */
4917 val = rd32(&pf->hw, I40E_GLGEN_RTRIG);
4918 val |= I40E_GLGEN_RTRIG_EMPFWR_MASK;
4919 wr32(&pf->hw, I40E_GLGEN_RTRIG, val);
4920 i40e_flush(&pf->hw);
4922 } else if (reset_flags & (1 << __I40E_PF_RESET_REQUESTED)) {
4924 /* Request a PF Reset
4926 * Resets only the PF-specific registers
4928 * This goes directly to the tear-down and rebuild of
4929 * the switch, since we need to do all the recovery as
4930 * for the Core Reset.
4932 dev_dbg(&pf->pdev->dev, "PFR requested\n");
4933 i40e_handle_reset_warning(pf);
4935 } else if (reset_flags & (1 << __I40E_REINIT_REQUESTED)) {
4938 /* Find the VSI(s) that requested a re-init */
4939 dev_info(&pf->pdev->dev,
4940 "VSI reinit requested\n");
4941 for (v = 0; v < pf->num_alloc_vsi; v++) {
4942 struct i40e_vsi *vsi = pf->vsi[v];
4944 test_bit(__I40E_REINIT_REQUESTED, &vsi->state)) {
4945 i40e_vsi_reinit_locked(pf->vsi[v]);
4946 clear_bit(__I40E_REINIT_REQUESTED, &vsi->state);
4950 /* no further action needed, so return now */
4952 } else if (reset_flags & (1 << __I40E_DOWN_REQUESTED)) {
4955 /* Find the VSI(s) that needs to be brought down */
4956 dev_info(&pf->pdev->dev, "VSI down requested\n");
4957 for (v = 0; v < pf->num_alloc_vsi; v++) {
4958 struct i40e_vsi *vsi = pf->vsi[v];
4960 test_bit(__I40E_DOWN_REQUESTED, &vsi->state)) {
4961 set_bit(__I40E_DOWN, &vsi->state);
4963 clear_bit(__I40E_DOWN_REQUESTED, &vsi->state);
4967 /* no further action needed, so return now */
4970 dev_info(&pf->pdev->dev,
4971 "bad reset request 0x%08x\n", reset_flags);
4976 #ifdef CONFIG_I40E_DCB
4978 * i40e_dcb_need_reconfig - Check if DCB needs reconfig
4979 * @pf: board private structure
4980 * @old_cfg: current DCB config
4981 * @new_cfg: new DCB config
4983 bool i40e_dcb_need_reconfig(struct i40e_pf *pf,
4984 struct i40e_dcbx_config *old_cfg,
4985 struct i40e_dcbx_config *new_cfg)
4987 bool need_reconfig = false;
4989 /* Check if ETS configuration has changed */
4990 if (memcmp(&new_cfg->etscfg,
4992 sizeof(new_cfg->etscfg))) {
4993 /* If Priority Table has changed reconfig is needed */
4994 if (memcmp(&new_cfg->etscfg.prioritytable,
4995 &old_cfg->etscfg.prioritytable,
4996 sizeof(new_cfg->etscfg.prioritytable))) {
4997 need_reconfig = true;
4998 dev_dbg(&pf->pdev->dev, "ETS UP2TC changed.\n");
5001 if (memcmp(&new_cfg->etscfg.tcbwtable,
5002 &old_cfg->etscfg.tcbwtable,
5003 sizeof(new_cfg->etscfg.tcbwtable)))
5004 dev_dbg(&pf->pdev->dev, "ETS TC BW Table changed.\n");
5006 if (memcmp(&new_cfg->etscfg.tsatable,
5007 &old_cfg->etscfg.tsatable,
5008 sizeof(new_cfg->etscfg.tsatable)))
5009 dev_dbg(&pf->pdev->dev, "ETS TSA Table changed.\n");
5012 /* Check if PFC configuration has changed */
5013 if (memcmp(&new_cfg->pfc,
5015 sizeof(new_cfg->pfc))) {
5016 need_reconfig = true;
5017 dev_dbg(&pf->pdev->dev, "PFC config change detected.\n");
5020 /* Check if APP Table has changed */
5021 if (memcmp(&new_cfg->app,
5023 sizeof(new_cfg->app))) {
5024 need_reconfig = true;
5025 dev_dbg(&pf->pdev->dev, "APP Table change detected.\n");
5028 dev_dbg(&pf->pdev->dev, "%s: need_reconfig=%d\n", __func__,
5030 return need_reconfig;
5034 * i40e_handle_lldp_event - Handle LLDP Change MIB event
5035 * @pf: board private structure
5036 * @e: event info posted on ARQ
5038 static int i40e_handle_lldp_event(struct i40e_pf *pf,
5039 struct i40e_arq_event_info *e)
5041 struct i40e_aqc_lldp_get_mib *mib =
5042 (struct i40e_aqc_lldp_get_mib *)&e->desc.params.raw;
5043 struct i40e_hw *hw = &pf->hw;
5044 struct i40e_dcbx_config *dcbx_cfg = &hw->local_dcbx_config;
5045 struct i40e_dcbx_config tmp_dcbx_cfg;
5046 bool need_reconfig = false;
5050 /* Not DCB capable or capability disabled */
5051 if (!(pf->flags & I40E_FLAG_DCB_CAPABLE))
5054 /* Ignore if event is not for Nearest Bridge */
5055 type = ((mib->type >> I40E_AQ_LLDP_BRIDGE_TYPE_SHIFT)
5056 & I40E_AQ_LLDP_BRIDGE_TYPE_MASK);
5057 dev_dbg(&pf->pdev->dev,
5058 "%s: LLDP event mib bridge type 0x%x\n", __func__, type);
5059 if (type != I40E_AQ_LLDP_BRIDGE_TYPE_NEAREST_BRIDGE)
5062 /* Check MIB Type and return if event for Remote MIB update */
5063 type = mib->type & I40E_AQ_LLDP_MIB_TYPE_MASK;
5064 dev_dbg(&pf->pdev->dev,
5065 "%s: LLDP event mib type %s\n", __func__,
5066 type ? "remote" : "local");
5067 if (type == I40E_AQ_LLDP_MIB_REMOTE) {
5068 /* Update the remote cached instance and return */
5069 ret = i40e_aq_get_dcb_config(hw, I40E_AQ_LLDP_MIB_REMOTE,
5070 I40E_AQ_LLDP_BRIDGE_TYPE_NEAREST_BRIDGE,
5071 &hw->remote_dcbx_config);
5075 memset(&tmp_dcbx_cfg, 0, sizeof(tmp_dcbx_cfg));
5076 /* Store the old configuration */
5077 tmp_dcbx_cfg = *dcbx_cfg;
5079 /* Get updated DCBX data from firmware */
5080 ret = i40e_get_dcb_config(&pf->hw);
5082 dev_info(&pf->pdev->dev, "Failed querying DCB configuration data from firmware.\n");
5086 /* No change detected in DCBX configs */
5087 if (!memcmp(&tmp_dcbx_cfg, dcbx_cfg, sizeof(tmp_dcbx_cfg))) {
5088 dev_dbg(&pf->pdev->dev, "No change detected in DCBX configuration.\n");
5092 need_reconfig = i40e_dcb_need_reconfig(pf, &tmp_dcbx_cfg, dcbx_cfg);
5094 i40e_dcbnl_flush_apps(pf, dcbx_cfg);
5099 /* Enable DCB tagging only when more than one TC */
5100 if (i40e_dcb_get_num_tc(dcbx_cfg) > 1)
5101 pf->flags |= I40E_FLAG_DCB_ENABLED;
5103 pf->flags &= ~I40E_FLAG_DCB_ENABLED;
5105 /* Reconfiguration needed quiesce all VSIs */
5106 i40e_pf_quiesce_all_vsi(pf);
5108 /* Changes in configuration update VEB/VSI */
5109 i40e_dcb_reconfigure(pf);
5111 ret = i40e_resume_port_tx(pf);
5113 /* In case of error no point in resuming VSIs */
5115 i40e_pf_unquiesce_all_vsi(pf);
5119 #endif /* CONFIG_I40E_DCB */
5122 * i40e_do_reset_safe - Protected reset path for userland calls.
5123 * @pf: board private structure
5124 * @reset_flags: which reset is requested
5127 void i40e_do_reset_safe(struct i40e_pf *pf, u32 reset_flags)
5130 i40e_do_reset(pf, reset_flags);
5135 * i40e_handle_lan_overflow_event - Handler for LAN queue overflow event
5136 * @pf: board private structure
5137 * @e: event info posted on ARQ
5139 * Handler for LAN Queue Overflow Event generated by the firmware for PF
5142 static void i40e_handle_lan_overflow_event(struct i40e_pf *pf,
5143 struct i40e_arq_event_info *e)
5145 struct i40e_aqc_lan_overflow *data =
5146 (struct i40e_aqc_lan_overflow *)&e->desc.params.raw;
5147 u32 queue = le32_to_cpu(data->prtdcb_rupto);
5148 u32 qtx_ctl = le32_to_cpu(data->otx_ctl);
5149 struct i40e_hw *hw = &pf->hw;
5153 dev_dbg(&pf->pdev->dev, "overflow Rx Queue Number = %d QTX_CTL=0x%08x\n",
5156 /* Queue belongs to VF, find the VF and issue VF reset */
5157 if (((qtx_ctl & I40E_QTX_CTL_PFVF_Q_MASK)
5158 >> I40E_QTX_CTL_PFVF_Q_SHIFT) == I40E_QTX_CTL_VF_QUEUE) {
5159 vf_id = (u16)((qtx_ctl & I40E_QTX_CTL_VFVM_INDX_MASK)
5160 >> I40E_QTX_CTL_VFVM_INDX_SHIFT);
5161 vf_id -= hw->func_caps.vf_base_id;
5162 vf = &pf->vf[vf_id];
5163 i40e_vc_notify_vf_reset(vf);
5164 /* Allow VF to process pending reset notification */
5166 i40e_reset_vf(vf, false);
5171 * i40e_service_event_complete - Finish up the service event
5172 * @pf: board private structure
5174 static void i40e_service_event_complete(struct i40e_pf *pf)
5176 BUG_ON(!test_bit(__I40E_SERVICE_SCHED, &pf->state));
5178 /* flush memory to make sure state is correct before next watchog */
5179 smp_mb__before_atomic();
5180 clear_bit(__I40E_SERVICE_SCHED, &pf->state);
5184 * i40e_get_cur_guaranteed_fd_count - Get the consumed guaranteed FD filters
5185 * @pf: board private structure
5187 int i40e_get_cur_guaranteed_fd_count(struct i40e_pf *pf)
5191 val = rd32(&pf->hw, I40E_PFQF_FDSTAT);
5192 fcnt_prog = (val & I40E_PFQF_FDSTAT_GUARANT_CNT_MASK);
5197 * i40e_get_current_fd_count - Get the count of total FD filters programmed
5198 * @pf: board private structure
5200 int i40e_get_current_fd_count(struct i40e_pf *pf)
5203 val = rd32(&pf->hw, I40E_PFQF_FDSTAT);
5204 fcnt_prog = (val & I40E_PFQF_FDSTAT_GUARANT_CNT_MASK) +
5205 ((val & I40E_PFQF_FDSTAT_BEST_CNT_MASK) >>
5206 I40E_PFQF_FDSTAT_BEST_CNT_SHIFT);
5211 * i40e_fdir_check_and_reenable - Function to reenabe FD ATR or SB if disabled
5212 * @pf: board private structure
5214 void i40e_fdir_check_and_reenable(struct i40e_pf *pf)
5216 u32 fcnt_prog, fcnt_avail;
5218 if (test_bit(__I40E_FD_FLUSH_REQUESTED, &pf->state))
5221 /* Check if, FD SB or ATR was auto disabled and if there is enough room
5224 fcnt_prog = i40e_get_cur_guaranteed_fd_count(pf);
5225 fcnt_avail = pf->fdir_pf_filter_count;
5226 if ((fcnt_prog < (fcnt_avail - I40E_FDIR_BUFFER_HEAD_ROOM)) ||
5227 (pf->fd_add_err == 0) ||
5228 (i40e_get_current_atr_cnt(pf) < pf->fd_atr_cnt)) {
5229 if ((pf->flags & I40E_FLAG_FD_SB_ENABLED) &&
5230 (pf->auto_disable_flags & I40E_FLAG_FD_SB_ENABLED)) {
5231 pf->auto_disable_flags &= ~I40E_FLAG_FD_SB_ENABLED;
5232 dev_info(&pf->pdev->dev, "FD Sideband/ntuple is being enabled since we have space in the table now\n");
5235 /* Wait for some more space to be available to turn on ATR */
5236 if (fcnt_prog < (fcnt_avail - I40E_FDIR_BUFFER_HEAD_ROOM * 2)) {
5237 if ((pf->flags & I40E_FLAG_FD_ATR_ENABLED) &&
5238 (pf->auto_disable_flags & I40E_FLAG_FD_ATR_ENABLED)) {
5239 pf->auto_disable_flags &= ~I40E_FLAG_FD_ATR_ENABLED;
5240 dev_info(&pf->pdev->dev, "ATR is being enabled since we have space in the table now\n");
5245 #define I40E_MIN_FD_FLUSH_INTERVAL 10
5247 * i40e_fdir_flush_and_replay - Function to flush all FD filters and replay SB
5248 * @pf: board private structure
5250 static void i40e_fdir_flush_and_replay(struct i40e_pf *pf)
5252 int flush_wait_retry = 50;
5255 if (!(pf->flags & (I40E_FLAG_FD_SB_ENABLED | I40E_FLAG_FD_ATR_ENABLED)))
5258 if (time_after(jiffies, pf->fd_flush_timestamp +
5259 (I40E_MIN_FD_FLUSH_INTERVAL * HZ))) {
5260 set_bit(__I40E_FD_FLUSH_REQUESTED, &pf->state);
5261 pf->fd_flush_timestamp = jiffies;
5262 pf->auto_disable_flags |= I40E_FLAG_FD_SB_ENABLED;
5263 pf->flags &= ~I40E_FLAG_FD_ATR_ENABLED;
5264 /* flush all filters */
5265 wr32(&pf->hw, I40E_PFQF_CTL_1,
5266 I40E_PFQF_CTL_1_CLEARFDTABLE_MASK);
5267 i40e_flush(&pf->hw);
5271 /* Check FD flush status every 5-6msec */
5272 usleep_range(5000, 6000);
5273 reg = rd32(&pf->hw, I40E_PFQF_CTL_1);
5274 if (!(reg & I40E_PFQF_CTL_1_CLEARFDTABLE_MASK))
5276 } while (flush_wait_retry--);
5277 if (reg & I40E_PFQF_CTL_1_CLEARFDTABLE_MASK) {
5278 dev_warn(&pf->pdev->dev, "FD table did not flush, needs more time\n");
5280 /* replay sideband filters */
5281 i40e_fdir_filter_restore(pf->vsi[pf->lan_vsi]);
5283 pf->flags |= I40E_FLAG_FD_ATR_ENABLED;
5284 pf->auto_disable_flags &= ~I40E_FLAG_FD_ATR_ENABLED;
5285 pf->auto_disable_flags &= ~I40E_FLAG_FD_SB_ENABLED;
5286 clear_bit(__I40E_FD_FLUSH_REQUESTED, &pf->state);
5287 dev_info(&pf->pdev->dev, "FD Filter table flushed and FD-SB replayed.\n");
5293 * i40e_get_current_atr_count - Get the count of total FD ATR filters programmed
5294 * @pf: board private structure
5296 int i40e_get_current_atr_cnt(struct i40e_pf *pf)
5298 return i40e_get_current_fd_count(pf) - pf->fdir_pf_active_filters;
5301 /* We can see up to 256 filter programming desc in transit if the filters are
5302 * being applied really fast; before we see the first
5303 * filter miss error on Rx queue 0. Accumulating enough error messages before
5304 * reacting will make sure we don't cause flush too often.
5306 #define I40E_MAX_FD_PROGRAM_ERROR 256
5309 * i40e_fdir_reinit_subtask - Worker thread to reinit FDIR filter table
5310 * @pf: board private structure
5312 static void i40e_fdir_reinit_subtask(struct i40e_pf *pf)
5315 /* if interface is down do nothing */
5316 if (test_bit(__I40E_DOWN, &pf->state))
5319 if (!(pf->flags & (I40E_FLAG_FD_SB_ENABLED | I40E_FLAG_FD_ATR_ENABLED)))
5322 if ((pf->fd_add_err >= I40E_MAX_FD_PROGRAM_ERROR) &&
5323 (i40e_get_current_atr_cnt(pf) >= pf->fd_atr_cnt) &&
5324 (i40e_get_current_atr_cnt(pf) > pf->fdir_pf_filter_count))
5325 i40e_fdir_flush_and_replay(pf);
5327 i40e_fdir_check_and_reenable(pf);
5332 * i40e_vsi_link_event - notify VSI of a link event
5333 * @vsi: vsi to be notified
5334 * @link_up: link up or down
5336 static void i40e_vsi_link_event(struct i40e_vsi *vsi, bool link_up)
5338 if (!vsi || test_bit(__I40E_DOWN, &vsi->state))
5341 switch (vsi->type) {
5346 if (!vsi->netdev || !vsi->netdev_registered)
5350 netif_carrier_on(vsi->netdev);
5351 netif_tx_wake_all_queues(vsi->netdev);
5353 netif_carrier_off(vsi->netdev);
5354 netif_tx_stop_all_queues(vsi->netdev);
5358 case I40E_VSI_SRIOV:
5361 case I40E_VSI_VMDQ2:
5363 case I40E_VSI_MIRROR:
5365 /* there is no notification for other VSIs */
5371 * i40e_veb_link_event - notify elements on the veb of a link event
5372 * @veb: veb to be notified
5373 * @link_up: link up or down
5375 static void i40e_veb_link_event(struct i40e_veb *veb, bool link_up)
5380 if (!veb || !veb->pf)
5384 /* depth first... */
5385 for (i = 0; i < I40E_MAX_VEB; i++)
5386 if (pf->veb[i] && (pf->veb[i]->uplink_seid == veb->seid))
5387 i40e_veb_link_event(pf->veb[i], link_up);
5389 /* ... now the local VSIs */
5390 for (i = 0; i < pf->num_alloc_vsi; i++)
5391 if (pf->vsi[i] && (pf->vsi[i]->uplink_seid == veb->seid))
5392 i40e_vsi_link_event(pf->vsi[i], link_up);
5396 * i40e_link_event - Update netif_carrier status
5397 * @pf: board private structure
5399 static void i40e_link_event(struct i40e_pf *pf)
5401 bool new_link, old_link;
5402 struct i40e_vsi *vsi = pf->vsi[pf->lan_vsi];
5404 /* set this to force the get_link_status call to refresh state */
5405 pf->hw.phy.get_link_info = true;
5407 old_link = (pf->hw.phy.link_info_old.link_info & I40E_AQ_LINK_UP);
5408 new_link = i40e_get_link_status(&pf->hw);
5410 if (new_link == old_link &&
5411 (test_bit(__I40E_DOWN, &vsi->state) ||
5412 new_link == netif_carrier_ok(vsi->netdev)))
5415 if (!test_bit(__I40E_DOWN, &vsi->state))
5416 i40e_print_link_message(vsi, new_link);
5418 /* Notify the base of the switch tree connected to
5419 * the link. Floating VEBs are not notified.
5421 if (pf->lan_veb != I40E_NO_VEB && pf->veb[pf->lan_veb])
5422 i40e_veb_link_event(pf->veb[pf->lan_veb], new_link);
5424 i40e_vsi_link_event(vsi, new_link);
5427 i40e_vc_notify_link_state(pf);
5429 if (pf->flags & I40E_FLAG_PTP)
5430 i40e_ptp_set_increment(pf);
5434 * i40e_check_hang_subtask - Check for hung queues and dropped interrupts
5435 * @pf: board private structure
5437 * Set the per-queue flags to request a check for stuck queues in the irq
5438 * clean functions, then force interrupts to be sure the irq clean is called.
5440 static void i40e_check_hang_subtask(struct i40e_pf *pf)
5444 /* If we're down or resetting, just bail */
5445 if (test_bit(__I40E_CONFIG_BUSY, &pf->state))
5448 /* for each VSI/netdev
5450 * set the check flag
5452 * force an interrupt
5454 for (v = 0; v < pf->num_alloc_vsi; v++) {
5455 struct i40e_vsi *vsi = pf->vsi[v];
5459 test_bit(__I40E_DOWN, &vsi->state) ||
5460 (vsi->netdev && !netif_carrier_ok(vsi->netdev)))
5463 for (i = 0; i < vsi->num_queue_pairs; i++) {
5464 set_check_for_tx_hang(vsi->tx_rings[i]);
5465 if (test_bit(__I40E_HANG_CHECK_ARMED,
5466 &vsi->tx_rings[i]->state))
5471 if (!(pf->flags & I40E_FLAG_MSIX_ENABLED)) {
5472 wr32(&vsi->back->hw, I40E_PFINT_DYN_CTL0,
5473 (I40E_PFINT_DYN_CTL0_INTENA_MASK |
5474 I40E_PFINT_DYN_CTL0_SWINT_TRIG_MASK));
5476 u16 vec = vsi->base_vector - 1;
5477 u32 val = (I40E_PFINT_DYN_CTLN_INTENA_MASK |
5478 I40E_PFINT_DYN_CTLN_SWINT_TRIG_MASK);
5479 for (i = 0; i < vsi->num_q_vectors; i++, vec++)
5480 wr32(&vsi->back->hw,
5481 I40E_PFINT_DYN_CTLN(vec), val);
5483 i40e_flush(&vsi->back->hw);
5489 * i40e_watchdog_subtask - periodic checks not using event driven response
5490 * @pf: board private structure
5492 static void i40e_watchdog_subtask(struct i40e_pf *pf)
5496 /* if interface is down do nothing */
5497 if (test_bit(__I40E_DOWN, &pf->state) ||
5498 test_bit(__I40E_CONFIG_BUSY, &pf->state))
5501 /* make sure we don't do these things too often */
5502 if (time_before(jiffies, (pf->service_timer_previous +
5503 pf->service_timer_period)))
5505 pf->service_timer_previous = jiffies;
5507 i40e_check_hang_subtask(pf);
5508 i40e_link_event(pf);
5510 /* Update the stats for active netdevs so the network stack
5511 * can look at updated numbers whenever it cares to
5513 for (i = 0; i < pf->num_alloc_vsi; i++)
5514 if (pf->vsi[i] && pf->vsi[i]->netdev)
5515 i40e_update_stats(pf->vsi[i]);
5517 /* Update the stats for the active switching components */
5518 for (i = 0; i < I40E_MAX_VEB; i++)
5520 i40e_update_veb_stats(pf->veb[i]);
5522 i40e_ptp_rx_hang(pf->vsi[pf->lan_vsi]);
5526 * i40e_reset_subtask - Set up for resetting the device and driver
5527 * @pf: board private structure
5529 static void i40e_reset_subtask(struct i40e_pf *pf)
5531 u32 reset_flags = 0;
5534 if (test_bit(__I40E_REINIT_REQUESTED, &pf->state)) {
5535 reset_flags |= (1 << __I40E_REINIT_REQUESTED);
5536 clear_bit(__I40E_REINIT_REQUESTED, &pf->state);
5538 if (test_bit(__I40E_PF_RESET_REQUESTED, &pf->state)) {
5539 reset_flags |= (1 << __I40E_PF_RESET_REQUESTED);
5540 clear_bit(__I40E_PF_RESET_REQUESTED, &pf->state);
5542 if (test_bit(__I40E_CORE_RESET_REQUESTED, &pf->state)) {
5543 reset_flags |= (1 << __I40E_CORE_RESET_REQUESTED);
5544 clear_bit(__I40E_CORE_RESET_REQUESTED, &pf->state);
5546 if (test_bit(__I40E_GLOBAL_RESET_REQUESTED, &pf->state)) {
5547 reset_flags |= (1 << __I40E_GLOBAL_RESET_REQUESTED);
5548 clear_bit(__I40E_GLOBAL_RESET_REQUESTED, &pf->state);
5550 if (test_bit(__I40E_DOWN_REQUESTED, &pf->state)) {
5551 reset_flags |= (1 << __I40E_DOWN_REQUESTED);
5552 clear_bit(__I40E_DOWN_REQUESTED, &pf->state);
5555 /* If there's a recovery already waiting, it takes
5556 * precedence before starting a new reset sequence.
5558 if (test_bit(__I40E_RESET_INTR_RECEIVED, &pf->state)) {
5559 i40e_handle_reset_warning(pf);
5563 /* If we're already down or resetting, just bail */
5565 !test_bit(__I40E_DOWN, &pf->state) &&
5566 !test_bit(__I40E_CONFIG_BUSY, &pf->state))
5567 i40e_do_reset(pf, reset_flags);
5574 * i40e_handle_link_event - Handle link event
5575 * @pf: board private structure
5576 * @e: event info posted on ARQ
5578 static void i40e_handle_link_event(struct i40e_pf *pf,
5579 struct i40e_arq_event_info *e)
5581 struct i40e_hw *hw = &pf->hw;
5582 struct i40e_aqc_get_link_status *status =
5583 (struct i40e_aqc_get_link_status *)&e->desc.params.raw;
5584 struct i40e_link_status *hw_link_info = &hw->phy.link_info;
5586 /* save off old link status information */
5587 memcpy(&pf->hw.phy.link_info_old, hw_link_info,
5588 sizeof(pf->hw.phy.link_info_old));
5590 /* Do a new status request to re-enable LSE reporting
5591 * and load new status information into the hw struct
5592 * This completely ignores any state information
5593 * in the ARQ event info, instead choosing to always
5594 * issue the AQ update link status command.
5596 i40e_link_event(pf);
5598 /* check for unqualified module, if link is down */
5599 if ((status->link_info & I40E_AQ_MEDIA_AVAILABLE) &&
5600 (!(status->an_info & I40E_AQ_QUALIFIED_MODULE)) &&
5601 (!(status->link_info & I40E_AQ_LINK_UP)))
5602 dev_err(&pf->pdev->dev,
5603 "The driver failed to link because an unqualified module was detected.\n");
5607 * i40e_clean_adminq_subtask - Clean the AdminQ rings
5608 * @pf: board private structure
5610 static void i40e_clean_adminq_subtask(struct i40e_pf *pf)
5612 struct i40e_arq_event_info event;
5613 struct i40e_hw *hw = &pf->hw;
5620 /* Do not run clean AQ when PF reset fails */
5621 if (test_bit(__I40E_RESET_FAILED, &pf->state))
5624 /* check for error indications */
5625 val = rd32(&pf->hw, pf->hw.aq.arq.len);
5627 if (val & I40E_PF_ARQLEN_ARQVFE_MASK) {
5628 dev_info(&pf->pdev->dev, "ARQ VF Error detected\n");
5629 val &= ~I40E_PF_ARQLEN_ARQVFE_MASK;
5631 if (val & I40E_PF_ARQLEN_ARQOVFL_MASK) {
5632 dev_info(&pf->pdev->dev, "ARQ Overflow Error detected\n");
5633 val &= ~I40E_PF_ARQLEN_ARQOVFL_MASK;
5635 if (val & I40E_PF_ARQLEN_ARQCRIT_MASK) {
5636 dev_info(&pf->pdev->dev, "ARQ Critical Error detected\n");
5637 val &= ~I40E_PF_ARQLEN_ARQCRIT_MASK;
5640 wr32(&pf->hw, pf->hw.aq.arq.len, val);
5642 val = rd32(&pf->hw, pf->hw.aq.asq.len);
5644 if (val & I40E_PF_ATQLEN_ATQVFE_MASK) {
5645 dev_info(&pf->pdev->dev, "ASQ VF Error detected\n");
5646 val &= ~I40E_PF_ATQLEN_ATQVFE_MASK;
5648 if (val & I40E_PF_ATQLEN_ATQOVFL_MASK) {
5649 dev_info(&pf->pdev->dev, "ASQ Overflow Error detected\n");
5650 val &= ~I40E_PF_ATQLEN_ATQOVFL_MASK;
5652 if (val & I40E_PF_ATQLEN_ATQCRIT_MASK) {
5653 dev_info(&pf->pdev->dev, "ASQ Critical Error detected\n");
5654 val &= ~I40E_PF_ATQLEN_ATQCRIT_MASK;
5657 wr32(&pf->hw, pf->hw.aq.asq.len, val);
5659 event.msg_size = I40E_MAX_AQ_BUF_SIZE;
5660 event.msg_buf = kzalloc(event.msg_size, GFP_KERNEL);
5665 event.msg_size = I40E_MAX_AQ_BUF_SIZE; /* reinit each time */
5666 ret = i40e_clean_arq_element(hw, &event, &pending);
5667 if (ret == I40E_ERR_ADMIN_QUEUE_NO_WORK)
5670 dev_info(&pf->pdev->dev, "ARQ event error %d\n", ret);
5674 opcode = le16_to_cpu(event.desc.opcode);
5677 case i40e_aqc_opc_get_link_status:
5678 i40e_handle_link_event(pf, &event);
5680 case i40e_aqc_opc_send_msg_to_pf:
5681 ret = i40e_vc_process_vf_msg(pf,
5682 le16_to_cpu(event.desc.retval),
5683 le32_to_cpu(event.desc.cookie_high),
5684 le32_to_cpu(event.desc.cookie_low),
5688 case i40e_aqc_opc_lldp_update_mib:
5689 dev_dbg(&pf->pdev->dev, "ARQ: Update LLDP MIB event received\n");
5690 #ifdef CONFIG_I40E_DCB
5692 ret = i40e_handle_lldp_event(pf, &event);
5694 #endif /* CONFIG_I40E_DCB */
5696 case i40e_aqc_opc_event_lan_overflow:
5697 dev_dbg(&pf->pdev->dev, "ARQ LAN queue overflow event received\n");
5698 i40e_handle_lan_overflow_event(pf, &event);
5700 case i40e_aqc_opc_send_msg_to_peer:
5701 dev_info(&pf->pdev->dev, "ARQ: Msg from other pf\n");
5704 dev_info(&pf->pdev->dev,
5705 "ARQ Error: Unknown event 0x%04x received\n",
5709 } while (pending && (i++ < pf->adminq_work_limit));
5711 clear_bit(__I40E_ADMINQ_EVENT_PENDING, &pf->state);
5712 /* re-enable Admin queue interrupt cause */
5713 val = rd32(hw, I40E_PFINT_ICR0_ENA);
5714 val |= I40E_PFINT_ICR0_ENA_ADMINQ_MASK;
5715 wr32(hw, I40E_PFINT_ICR0_ENA, val);
5718 kfree(event.msg_buf);
5722 * i40e_verify_eeprom - make sure eeprom is good to use
5723 * @pf: board private structure
5725 static void i40e_verify_eeprom(struct i40e_pf *pf)
5729 err = i40e_diag_eeprom_test(&pf->hw);
5731 /* retry in case of garbage read */
5732 err = i40e_diag_eeprom_test(&pf->hw);
5734 dev_info(&pf->pdev->dev, "eeprom check failed (%d), Tx/Rx traffic disabled\n",
5736 set_bit(__I40E_BAD_EEPROM, &pf->state);
5740 if (!err && test_bit(__I40E_BAD_EEPROM, &pf->state)) {
5741 dev_info(&pf->pdev->dev, "eeprom check passed, Tx/Rx traffic enabled\n");
5742 clear_bit(__I40E_BAD_EEPROM, &pf->state);
5747 * i40e_reconstitute_veb - rebuild the VEB and anything connected to it
5748 * @veb: pointer to the VEB instance
5750 * This is a recursive function that first builds the attached VSIs then
5751 * recurses in to build the next layer of VEB. We track the connections
5752 * through our own index numbers because the seid's from the HW could
5753 * change across the reset.
5755 static int i40e_reconstitute_veb(struct i40e_veb *veb)
5757 struct i40e_vsi *ctl_vsi = NULL;
5758 struct i40e_pf *pf = veb->pf;
5762 /* build VSI that owns this VEB, temporarily attached to base VEB */
5763 for (v = 0; v < pf->num_alloc_vsi && !ctl_vsi; v++) {
5765 pf->vsi[v]->veb_idx == veb->idx &&
5766 pf->vsi[v]->flags & I40E_VSI_FLAG_VEB_OWNER) {
5767 ctl_vsi = pf->vsi[v];
5772 dev_info(&pf->pdev->dev,
5773 "missing owner VSI for veb_idx %d\n", veb->idx);
5775 goto end_reconstitute;
5777 if (ctl_vsi != pf->vsi[pf->lan_vsi])
5778 ctl_vsi->uplink_seid = pf->vsi[pf->lan_vsi]->uplink_seid;
5779 ret = i40e_add_vsi(ctl_vsi);
5781 dev_info(&pf->pdev->dev,
5782 "rebuild of owner VSI failed: %d\n", ret);
5783 goto end_reconstitute;
5785 i40e_vsi_reset_stats(ctl_vsi);
5787 /* create the VEB in the switch and move the VSI onto the VEB */
5788 ret = i40e_add_veb(veb, ctl_vsi);
5790 goto end_reconstitute;
5792 /* create the remaining VSIs attached to this VEB */
5793 for (v = 0; v < pf->num_alloc_vsi; v++) {
5794 if (!pf->vsi[v] || pf->vsi[v] == ctl_vsi)
5797 if (pf->vsi[v]->veb_idx == veb->idx) {
5798 struct i40e_vsi *vsi = pf->vsi[v];
5799 vsi->uplink_seid = veb->seid;
5800 ret = i40e_add_vsi(vsi);
5802 dev_info(&pf->pdev->dev,
5803 "rebuild of vsi_idx %d failed: %d\n",
5805 goto end_reconstitute;
5807 i40e_vsi_reset_stats(vsi);
5811 /* create any VEBs attached to this VEB - RECURSION */
5812 for (veb_idx = 0; veb_idx < I40E_MAX_VEB; veb_idx++) {
5813 if (pf->veb[veb_idx] && pf->veb[veb_idx]->veb_idx == veb->idx) {
5814 pf->veb[veb_idx]->uplink_seid = veb->seid;
5815 ret = i40e_reconstitute_veb(pf->veb[veb_idx]);
5826 * i40e_get_capabilities - get info about the HW
5827 * @pf: the PF struct
5829 static int i40e_get_capabilities(struct i40e_pf *pf)
5831 struct i40e_aqc_list_capabilities_element_resp *cap_buf;
5836 buf_len = 40 * sizeof(struct i40e_aqc_list_capabilities_element_resp);
5838 cap_buf = kzalloc(buf_len, GFP_KERNEL);
5842 /* this loads the data into the hw struct for us */
5843 err = i40e_aq_discover_capabilities(&pf->hw, cap_buf, buf_len,
5845 i40e_aqc_opc_list_func_capabilities,
5847 /* data loaded, buffer no longer needed */
5850 if (pf->hw.aq.asq_last_status == I40E_AQ_RC_ENOMEM) {
5851 /* retry with a larger buffer */
5852 buf_len = data_size;
5853 } else if (pf->hw.aq.asq_last_status != I40E_AQ_RC_OK) {
5854 dev_info(&pf->pdev->dev,
5855 "capability discovery failed: aq=%d\n",
5856 pf->hw.aq.asq_last_status);
5861 if (((pf->hw.aq.fw_maj_ver == 2) && (pf->hw.aq.fw_min_ver < 22)) ||
5862 (pf->hw.aq.fw_maj_ver < 2)) {
5863 pf->hw.func_caps.num_msix_vectors++;
5864 pf->hw.func_caps.num_msix_vectors_vf++;
5867 if (pf->hw.debug_mask & I40E_DEBUG_USER)
5868 dev_info(&pf->pdev->dev,
5869 "pf=%d, num_vfs=%d, msix_pf=%d, msix_vf=%d, fd_g=%d, fd_b=%d, pf_max_q=%d num_vsi=%d\n",
5870 pf->hw.pf_id, pf->hw.func_caps.num_vfs,
5871 pf->hw.func_caps.num_msix_vectors,
5872 pf->hw.func_caps.num_msix_vectors_vf,
5873 pf->hw.func_caps.fd_filters_guaranteed,
5874 pf->hw.func_caps.fd_filters_best_effort,
5875 pf->hw.func_caps.num_tx_qp,
5876 pf->hw.func_caps.num_vsis);
5878 #define DEF_NUM_VSI (1 + (pf->hw.func_caps.fcoe ? 1 : 0) \
5879 + pf->hw.func_caps.num_vfs)
5880 if (pf->hw.revision_id == 0 && (DEF_NUM_VSI > pf->hw.func_caps.num_vsis)) {
5881 dev_info(&pf->pdev->dev,
5882 "got num_vsis %d, setting num_vsis to %d\n",
5883 pf->hw.func_caps.num_vsis, DEF_NUM_VSI);
5884 pf->hw.func_caps.num_vsis = DEF_NUM_VSI;
5890 static int i40e_vsi_clear(struct i40e_vsi *vsi);
5893 * i40e_fdir_sb_setup - initialize the Flow Director resources for Sideband
5894 * @pf: board private structure
5896 static void i40e_fdir_sb_setup(struct i40e_pf *pf)
5898 struct i40e_vsi *vsi;
5901 /* quick workaround for an NVM issue that leaves a critical register
5904 if (!rd32(&pf->hw, I40E_GLQF_HKEY(0))) {
5905 static const u32 hkey[] = {
5906 0xe640d33f, 0xcdfe98ab, 0x73fa7161, 0x0d7a7d36,
5907 0xeacb7d61, 0xaa4f05b6, 0x9c5c89ed, 0xfc425ddb,
5908 0xa4654832, 0xfc7461d4, 0x8f827619, 0xf5c63c21,
5911 for (i = 0; i <= I40E_GLQF_HKEY_MAX_INDEX; i++)
5912 wr32(&pf->hw, I40E_GLQF_HKEY(i), hkey[i]);
5915 if (!(pf->flags & I40E_FLAG_FD_SB_ENABLED))
5918 /* find existing VSI and see if it needs configuring */
5920 for (i = 0; i < pf->num_alloc_vsi; i++) {
5921 if (pf->vsi[i] && pf->vsi[i]->type == I40E_VSI_FDIR) {
5927 /* create a new VSI if none exists */
5929 vsi = i40e_vsi_setup(pf, I40E_VSI_FDIR,
5930 pf->vsi[pf->lan_vsi]->seid, 0);
5932 dev_info(&pf->pdev->dev, "Couldn't create FDir VSI\n");
5933 pf->flags &= ~I40E_FLAG_FD_SB_ENABLED;
5938 i40e_vsi_setup_irqhandler(vsi, i40e_fdir_clean_ring);
5942 * i40e_fdir_teardown - release the Flow Director resources
5943 * @pf: board private structure
5945 static void i40e_fdir_teardown(struct i40e_pf *pf)
5949 i40e_fdir_filter_exit(pf);
5950 for (i = 0; i < pf->num_alloc_vsi; i++) {
5951 if (pf->vsi[i] && pf->vsi[i]->type == I40E_VSI_FDIR) {
5952 i40e_vsi_release(pf->vsi[i]);
5959 * i40e_prep_for_reset - prep for the core to reset
5960 * @pf: board private structure
5962 * Close up the VFs and other things in prep for pf Reset.
5964 static void i40e_prep_for_reset(struct i40e_pf *pf)
5966 struct i40e_hw *hw = &pf->hw;
5967 i40e_status ret = 0;
5970 clear_bit(__I40E_RESET_INTR_RECEIVED, &pf->state);
5971 if (test_and_set_bit(__I40E_RESET_RECOVERY_PENDING, &pf->state))
5974 dev_dbg(&pf->pdev->dev, "Tearing down internal switch for reset\n");
5976 /* quiesce the VSIs and their queues that are not already DOWN */
5977 i40e_pf_quiesce_all_vsi(pf);
5979 for (v = 0; v < pf->num_alloc_vsi; v++) {
5981 pf->vsi[v]->seid = 0;
5984 i40e_shutdown_adminq(&pf->hw);
5986 /* call shutdown HMC */
5987 if (hw->hmc.hmc_obj) {
5988 ret = i40e_shutdown_lan_hmc(hw);
5990 dev_warn(&pf->pdev->dev,
5991 "shutdown_lan_hmc failed: %d\n", ret);
5996 * i40e_send_version - update firmware with driver version
5999 static void i40e_send_version(struct i40e_pf *pf)
6001 struct i40e_driver_version dv;
6003 dv.major_version = DRV_VERSION_MAJOR;
6004 dv.minor_version = DRV_VERSION_MINOR;
6005 dv.build_version = DRV_VERSION_BUILD;
6006 dv.subbuild_version = 0;
6007 strlcpy(dv.driver_string, DRV_VERSION, sizeof(dv.driver_string));
6008 i40e_aq_send_driver_version(&pf->hw, &dv, NULL);
6012 * i40e_reset_and_rebuild - reset and rebuild using a saved config
6013 * @pf: board private structure
6014 * @reinit: if the Main VSI needs to re-initialized.
6016 static void i40e_reset_and_rebuild(struct i40e_pf *pf, bool reinit)
6018 struct i40e_hw *hw = &pf->hw;
6019 u8 set_fc_aq_fail = 0;
6023 /* Now we wait for GRST to settle out.
6024 * We don't have to delete the VEBs or VSIs from the hw switch
6025 * because the reset will make them disappear.
6027 ret = i40e_pf_reset(hw);
6029 dev_info(&pf->pdev->dev, "PF reset failed, %d\n", ret);
6030 set_bit(__I40E_RESET_FAILED, &pf->state);
6031 goto clear_recovery;
6035 if (test_bit(__I40E_DOWN, &pf->state))
6036 goto clear_recovery;
6037 dev_dbg(&pf->pdev->dev, "Rebuilding internal switch\n");
6039 /* rebuild the basics for the AdminQ, HMC, and initial HW switch */
6040 ret = i40e_init_adminq(&pf->hw);
6042 dev_info(&pf->pdev->dev, "Rebuild AdminQ failed, %d\n", ret);
6043 goto clear_recovery;
6046 /* re-verify the eeprom if we just had an EMP reset */
6047 if (test_bit(__I40E_EMP_RESET_REQUESTED, &pf->state)) {
6048 clear_bit(__I40E_EMP_RESET_REQUESTED, &pf->state);
6049 i40e_verify_eeprom(pf);
6052 i40e_clear_pxe_mode(hw);
6053 ret = i40e_get_capabilities(pf);
6055 dev_info(&pf->pdev->dev, "i40e_get_capabilities failed, %d\n",
6057 goto end_core_reset;
6060 ret = i40e_init_lan_hmc(hw, hw->func_caps.num_tx_qp,
6061 hw->func_caps.num_rx_qp,
6062 pf->fcoe_hmc_cntx_num, pf->fcoe_hmc_filt_num);
6064 dev_info(&pf->pdev->dev, "init_lan_hmc failed: %d\n", ret);
6065 goto end_core_reset;
6067 ret = i40e_configure_lan_hmc(hw, I40E_HMC_MODEL_DIRECT_ONLY);
6069 dev_info(&pf->pdev->dev, "configure_lan_hmc failed: %d\n", ret);
6070 goto end_core_reset;
6073 #ifdef CONFIG_I40E_DCB
6074 ret = i40e_init_pf_dcb(pf);
6076 dev_info(&pf->pdev->dev, "init_pf_dcb failed: %d\n", ret);
6077 goto end_core_reset;
6079 #endif /* CONFIG_I40E_DCB */
6081 ret = i40e_init_pf_fcoe(pf);
6083 dev_info(&pf->pdev->dev, "init_pf_fcoe failed: %d\n", ret);
6086 /* do basic switch setup */
6087 ret = i40e_setup_pf_switch(pf, reinit);
6089 goto end_core_reset;
6091 /* driver is only interested in link up/down and module qualification
6092 * reports from firmware
6094 ret = i40e_aq_set_phy_int_mask(&pf->hw,
6095 I40E_AQ_EVENT_LINK_UPDOWN |
6096 I40E_AQ_EVENT_MODULE_QUAL_FAIL, NULL);
6098 dev_info(&pf->pdev->dev, "set phy mask fail, aq_err %d\n", ret);
6100 /* make sure our flow control settings are restored */
6101 ret = i40e_set_fc(&pf->hw, &set_fc_aq_fail, true);
6103 dev_info(&pf->pdev->dev, "set fc fail, aq_err %d\n", ret);
6105 /* Rebuild the VSIs and VEBs that existed before reset.
6106 * They are still in our local switch element arrays, so only
6107 * need to rebuild the switch model in the HW.
6109 * If there were VEBs but the reconstitution failed, we'll try
6110 * try to recover minimal use by getting the basic PF VSI working.
6112 if (pf->vsi[pf->lan_vsi]->uplink_seid != pf->mac_seid) {
6113 dev_dbg(&pf->pdev->dev, "attempting to rebuild switch\n");
6114 /* find the one VEB connected to the MAC, and find orphans */
6115 for (v = 0; v < I40E_MAX_VEB; v++) {
6119 if (pf->veb[v]->uplink_seid == pf->mac_seid ||
6120 pf->veb[v]->uplink_seid == 0) {
6121 ret = i40e_reconstitute_veb(pf->veb[v]);
6126 /* If Main VEB failed, we're in deep doodoo,
6127 * so give up rebuilding the switch and set up
6128 * for minimal rebuild of PF VSI.
6129 * If orphan failed, we'll report the error
6130 * but try to keep going.
6132 if (pf->veb[v]->uplink_seid == pf->mac_seid) {
6133 dev_info(&pf->pdev->dev,
6134 "rebuild of switch failed: %d, will try to set up simple PF connection\n",
6136 pf->vsi[pf->lan_vsi]->uplink_seid
6139 } else if (pf->veb[v]->uplink_seid == 0) {
6140 dev_info(&pf->pdev->dev,
6141 "rebuild of orphan VEB failed: %d\n",
6148 if (pf->vsi[pf->lan_vsi]->uplink_seid == pf->mac_seid) {
6149 dev_dbg(&pf->pdev->dev, "attempting to rebuild PF VSI\n");
6150 /* no VEB, so rebuild only the Main VSI */
6151 ret = i40e_add_vsi(pf->vsi[pf->lan_vsi]);
6153 dev_info(&pf->pdev->dev,
6154 "rebuild of Main VSI failed: %d\n", ret);
6155 goto end_core_reset;
6160 ret = i40e_aq_set_link_restart_an(&pf->hw, true, NULL);
6162 dev_info(&pf->pdev->dev, "link restart failed, aq_err=%d\n",
6163 pf->hw.aq.asq_last_status);
6166 /* reinit the misc interrupt */
6167 if (pf->flags & I40E_FLAG_MSIX_ENABLED)
6168 ret = i40e_setup_misc_vector(pf);
6170 /* restart the VSIs that were rebuilt and running before the reset */
6171 i40e_pf_unquiesce_all_vsi(pf);
6173 if (pf->num_alloc_vfs) {
6174 for (v = 0; v < pf->num_alloc_vfs; v++)
6175 i40e_reset_vf(&pf->vf[v], true);
6178 /* tell the firmware that we're starting */
6179 i40e_send_version(pf);
6182 clear_bit(__I40E_RESET_FAILED, &pf->state);
6184 clear_bit(__I40E_RESET_RECOVERY_PENDING, &pf->state);
6188 * i40e_handle_reset_warning - prep for the pf to reset, reset and rebuild
6189 * @pf: board private structure
6191 * Close up the VFs and other things in prep for a Core Reset,
6192 * then get ready to rebuild the world.
6194 static void i40e_handle_reset_warning(struct i40e_pf *pf)
6196 i40e_prep_for_reset(pf);
6197 i40e_reset_and_rebuild(pf, false);
6201 * i40e_handle_mdd_event
6202 * @pf: pointer to the pf structure
6204 * Called from the MDD irq handler to identify possibly malicious vfs
6206 static void i40e_handle_mdd_event(struct i40e_pf *pf)
6208 struct i40e_hw *hw = &pf->hw;
6209 bool mdd_detected = false;
6210 bool pf_mdd_detected = false;
6215 if (!test_bit(__I40E_MDD_EVENT_PENDING, &pf->state))
6218 /* find what triggered the MDD event */
6219 reg = rd32(hw, I40E_GL_MDET_TX);
6220 if (reg & I40E_GL_MDET_TX_VALID_MASK) {
6221 u8 pf_num = (reg & I40E_GL_MDET_TX_PF_NUM_MASK) >>
6222 I40E_GL_MDET_TX_PF_NUM_SHIFT;
6223 u16 vf_num = (reg & I40E_GL_MDET_TX_VF_NUM_MASK) >>
6224 I40E_GL_MDET_TX_VF_NUM_SHIFT;
6225 u8 event = (reg & I40E_GL_MDET_TX_EVENT_MASK) >>
6226 I40E_GL_MDET_TX_EVENT_SHIFT;
6227 u16 queue = ((reg & I40E_GL_MDET_TX_QUEUE_MASK) >>
6228 I40E_GL_MDET_TX_QUEUE_SHIFT) -
6229 pf->hw.func_caps.base_queue;
6230 if (netif_msg_tx_err(pf))
6231 dev_info(&pf->pdev->dev, "Malicious Driver Detection event 0x%02x on TX queue %d pf number 0x%02x vf number 0x%02x\n",
6232 event, queue, pf_num, vf_num);
6233 wr32(hw, I40E_GL_MDET_TX, 0xffffffff);
6234 mdd_detected = true;
6236 reg = rd32(hw, I40E_GL_MDET_RX);
6237 if (reg & I40E_GL_MDET_RX_VALID_MASK) {
6238 u8 func = (reg & I40E_GL_MDET_RX_FUNCTION_MASK) >>
6239 I40E_GL_MDET_RX_FUNCTION_SHIFT;
6240 u8 event = (reg & I40E_GL_MDET_RX_EVENT_MASK) >>
6241 I40E_GL_MDET_RX_EVENT_SHIFT;
6242 u16 queue = ((reg & I40E_GL_MDET_RX_QUEUE_MASK) >>
6243 I40E_GL_MDET_RX_QUEUE_SHIFT) -
6244 pf->hw.func_caps.base_queue;
6245 if (netif_msg_rx_err(pf))
6246 dev_info(&pf->pdev->dev, "Malicious Driver Detection event 0x%02x on RX queue %d of function 0x%02x\n",
6247 event, queue, func);
6248 wr32(hw, I40E_GL_MDET_RX, 0xffffffff);
6249 mdd_detected = true;
6253 reg = rd32(hw, I40E_PF_MDET_TX);
6254 if (reg & I40E_PF_MDET_TX_VALID_MASK) {
6255 wr32(hw, I40E_PF_MDET_TX, 0xFFFF);
6256 dev_info(&pf->pdev->dev, "TX driver issue detected, PF reset issued\n");
6257 pf_mdd_detected = true;
6259 reg = rd32(hw, I40E_PF_MDET_RX);
6260 if (reg & I40E_PF_MDET_RX_VALID_MASK) {
6261 wr32(hw, I40E_PF_MDET_RX, 0xFFFF);
6262 dev_info(&pf->pdev->dev, "RX driver issue detected, PF reset issued\n");
6263 pf_mdd_detected = true;
6265 /* Queue belongs to the PF, initiate a reset */
6266 if (pf_mdd_detected) {
6267 set_bit(__I40E_PF_RESET_REQUESTED, &pf->state);
6268 i40e_service_event_schedule(pf);
6272 /* see if one of the VFs needs its hand slapped */
6273 for (i = 0; i < pf->num_alloc_vfs && mdd_detected; i++) {
6275 reg = rd32(hw, I40E_VP_MDET_TX(i));
6276 if (reg & I40E_VP_MDET_TX_VALID_MASK) {
6277 wr32(hw, I40E_VP_MDET_TX(i), 0xFFFF);
6278 vf->num_mdd_events++;
6279 dev_info(&pf->pdev->dev, "TX driver issue detected on VF %d\n",
6283 reg = rd32(hw, I40E_VP_MDET_RX(i));
6284 if (reg & I40E_VP_MDET_RX_VALID_MASK) {
6285 wr32(hw, I40E_VP_MDET_RX(i), 0xFFFF);
6286 vf->num_mdd_events++;
6287 dev_info(&pf->pdev->dev, "RX driver issue detected on VF %d\n",
6291 if (vf->num_mdd_events > I40E_DEFAULT_NUM_MDD_EVENTS_ALLOWED) {
6292 dev_info(&pf->pdev->dev,
6293 "Too many MDD events on VF %d, disabled\n", i);
6294 dev_info(&pf->pdev->dev,
6295 "Use PF Control I/F to re-enable the VF\n");
6296 set_bit(I40E_VF_STAT_DISABLED, &vf->vf_states);
6300 /* re-enable mdd interrupt cause */
6301 clear_bit(__I40E_MDD_EVENT_PENDING, &pf->state);
6302 reg = rd32(hw, I40E_PFINT_ICR0_ENA);
6303 reg |= I40E_PFINT_ICR0_ENA_MAL_DETECT_MASK;
6304 wr32(hw, I40E_PFINT_ICR0_ENA, reg);
6308 #ifdef CONFIG_I40E_VXLAN
6310 * i40e_sync_vxlan_filters_subtask - Sync the VSI filter list with HW
6311 * @pf: board private structure
6313 static void i40e_sync_vxlan_filters_subtask(struct i40e_pf *pf)
6315 struct i40e_hw *hw = &pf->hw;
6321 if (!(pf->flags & I40E_FLAG_VXLAN_FILTER_SYNC))
6324 pf->flags &= ~I40E_FLAG_VXLAN_FILTER_SYNC;
6326 for (i = 0; i < I40E_MAX_PF_UDP_OFFLOAD_PORTS; i++) {
6327 if (pf->pending_vxlan_bitmap & (1 << i)) {
6328 pf->pending_vxlan_bitmap &= ~(1 << i);
6329 port = pf->vxlan_ports[i];
6331 i40e_aq_add_udp_tunnel(hw, ntohs(port),
6332 I40E_AQC_TUNNEL_TYPE_VXLAN,
6333 &filter_index, NULL)
6334 : i40e_aq_del_udp_tunnel(hw, i, NULL);
6337 dev_info(&pf->pdev->dev, "Failed to execute AQ command for %s port %d with index %d\n",
6338 port ? "adding" : "deleting",
6339 ntohs(port), port ? i : i);
6341 pf->vxlan_ports[i] = 0;
6343 dev_info(&pf->pdev->dev, "%s port %d with AQ command with index %d\n",
6344 port ? "Added" : "Deleted",
6345 ntohs(port), port ? i : filter_index);
6353 * i40e_service_task - Run the driver's async subtasks
6354 * @work: pointer to work_struct containing our data
6356 static void i40e_service_task(struct work_struct *work)
6358 struct i40e_pf *pf = container_of(work,
6361 unsigned long start_time = jiffies;
6363 /* don't bother with service tasks if a reset is in progress */
6364 if (test_bit(__I40E_RESET_RECOVERY_PENDING, &pf->state)) {
6365 i40e_service_event_complete(pf);
6369 i40e_reset_subtask(pf);
6370 i40e_handle_mdd_event(pf);
6371 i40e_vc_process_vflr_event(pf);
6372 i40e_watchdog_subtask(pf);
6373 i40e_fdir_reinit_subtask(pf);
6374 i40e_sync_filters_subtask(pf);
6375 #ifdef CONFIG_I40E_VXLAN
6376 i40e_sync_vxlan_filters_subtask(pf);
6378 i40e_clean_adminq_subtask(pf);
6380 i40e_service_event_complete(pf);
6382 /* If the tasks have taken longer than one timer cycle or there
6383 * is more work to be done, reschedule the service task now
6384 * rather than wait for the timer to tick again.
6386 if (time_after(jiffies, (start_time + pf->service_timer_period)) ||
6387 test_bit(__I40E_ADMINQ_EVENT_PENDING, &pf->state) ||
6388 test_bit(__I40E_MDD_EVENT_PENDING, &pf->state) ||
6389 test_bit(__I40E_VFLR_EVENT_PENDING, &pf->state))
6390 i40e_service_event_schedule(pf);
6394 * i40e_service_timer - timer callback
6395 * @data: pointer to PF struct
6397 static void i40e_service_timer(unsigned long data)
6399 struct i40e_pf *pf = (struct i40e_pf *)data;
6401 mod_timer(&pf->service_timer,
6402 round_jiffies(jiffies + pf->service_timer_period));
6403 i40e_service_event_schedule(pf);
6407 * i40e_set_num_rings_in_vsi - Determine number of rings in the VSI
6408 * @vsi: the VSI being configured
6410 static int i40e_set_num_rings_in_vsi(struct i40e_vsi *vsi)
6412 struct i40e_pf *pf = vsi->back;
6414 switch (vsi->type) {
6416 vsi->alloc_queue_pairs = pf->num_lan_qps;
6417 vsi->num_desc = ALIGN(I40E_DEFAULT_NUM_DESCRIPTORS,
6418 I40E_REQ_DESCRIPTOR_MULTIPLE);
6419 if (pf->flags & I40E_FLAG_MSIX_ENABLED)
6420 vsi->num_q_vectors = pf->num_lan_msix;
6422 vsi->num_q_vectors = 1;
6427 vsi->alloc_queue_pairs = 1;
6428 vsi->num_desc = ALIGN(I40E_FDIR_RING_COUNT,
6429 I40E_REQ_DESCRIPTOR_MULTIPLE);
6430 vsi->num_q_vectors = 1;
6433 case I40E_VSI_VMDQ2:
6434 vsi->alloc_queue_pairs = pf->num_vmdq_qps;
6435 vsi->num_desc = ALIGN(I40E_DEFAULT_NUM_DESCRIPTORS,
6436 I40E_REQ_DESCRIPTOR_MULTIPLE);
6437 vsi->num_q_vectors = pf->num_vmdq_msix;
6440 case I40E_VSI_SRIOV:
6441 vsi->alloc_queue_pairs = pf->num_vf_qps;
6442 vsi->num_desc = ALIGN(I40E_DEFAULT_NUM_DESCRIPTORS,
6443 I40E_REQ_DESCRIPTOR_MULTIPLE);
6448 vsi->alloc_queue_pairs = pf->num_fcoe_qps;
6449 vsi->num_desc = ALIGN(I40E_DEFAULT_NUM_DESCRIPTORS,
6450 I40E_REQ_DESCRIPTOR_MULTIPLE);
6451 vsi->num_q_vectors = pf->num_fcoe_msix;
6454 #endif /* I40E_FCOE */
6464 * i40e_vsi_alloc_arrays - Allocate queue and vector pointer arrays for the vsi
6465 * @type: VSI pointer
6466 * @alloc_qvectors: a bool to specify if q_vectors need to be allocated.
6468 * On error: returns error code (negative)
6469 * On success: returns 0
6471 static int i40e_vsi_alloc_arrays(struct i40e_vsi *vsi, bool alloc_qvectors)
6476 /* allocate memory for both Tx and Rx ring pointers */
6477 size = sizeof(struct i40e_ring *) * vsi->alloc_queue_pairs * 2;
6478 vsi->tx_rings = kzalloc(size, GFP_KERNEL);
6481 vsi->rx_rings = &vsi->tx_rings[vsi->alloc_queue_pairs];
6483 if (alloc_qvectors) {
6484 /* allocate memory for q_vector pointers */
6485 size = sizeof(struct i40e_q_vector *) * vsi->num_q_vectors;
6486 vsi->q_vectors = kzalloc(size, GFP_KERNEL);
6487 if (!vsi->q_vectors) {
6495 kfree(vsi->tx_rings);
6500 * i40e_vsi_mem_alloc - Allocates the next available struct vsi in the PF
6501 * @pf: board private structure
6502 * @type: type of VSI
6504 * On error: returns error code (negative)
6505 * On success: returns vsi index in PF (positive)
6507 static int i40e_vsi_mem_alloc(struct i40e_pf *pf, enum i40e_vsi_type type)
6510 struct i40e_vsi *vsi;
6514 /* Need to protect the allocation of the VSIs at the PF level */
6515 mutex_lock(&pf->switch_mutex);
6517 /* VSI list may be fragmented if VSI creation/destruction has
6518 * been happening. We can afford to do a quick scan to look
6519 * for any free VSIs in the list.
6521 * find next empty vsi slot, looping back around if necessary
6524 while (i < pf->num_alloc_vsi && pf->vsi[i])
6526 if (i >= pf->num_alloc_vsi) {
6528 while (i < pf->next_vsi && pf->vsi[i])
6532 if (i < pf->num_alloc_vsi && !pf->vsi[i]) {
6533 vsi_idx = i; /* Found one! */
6536 goto unlock_pf; /* out of VSI slots! */
6540 vsi = kzalloc(sizeof(*vsi), GFP_KERNEL);
6547 set_bit(__I40E_DOWN, &vsi->state);
6550 vsi->rx_itr_setting = pf->rx_itr_default;
6551 vsi->tx_itr_setting = pf->tx_itr_default;
6552 vsi->netdev_registered = false;
6553 vsi->work_limit = I40E_DEFAULT_IRQ_WORK;
6554 INIT_LIST_HEAD(&vsi->mac_filter_list);
6555 vsi->irqs_ready = false;
6557 ret = i40e_set_num_rings_in_vsi(vsi);
6561 ret = i40e_vsi_alloc_arrays(vsi, true);
6565 /* Setup default MSIX irq handler for VSI */
6566 i40e_vsi_setup_irqhandler(vsi, i40e_msix_clean_rings);
6568 pf->vsi[vsi_idx] = vsi;
6573 pf->next_vsi = i - 1;
6576 mutex_unlock(&pf->switch_mutex);
6581 * i40e_vsi_free_arrays - Free queue and vector pointer arrays for the VSI
6582 * @type: VSI pointer
6583 * @free_qvectors: a bool to specify if q_vectors need to be freed.
6585 * On error: returns error code (negative)
6586 * On success: returns 0
6588 static void i40e_vsi_free_arrays(struct i40e_vsi *vsi, bool free_qvectors)
6590 /* free the ring and vector containers */
6591 if (free_qvectors) {
6592 kfree(vsi->q_vectors);
6593 vsi->q_vectors = NULL;
6595 kfree(vsi->tx_rings);
6596 vsi->tx_rings = NULL;
6597 vsi->rx_rings = NULL;
6601 * i40e_vsi_clear - Deallocate the VSI provided
6602 * @vsi: the VSI being un-configured
6604 static int i40e_vsi_clear(struct i40e_vsi *vsi)
6615 mutex_lock(&pf->switch_mutex);
6616 if (!pf->vsi[vsi->idx]) {
6617 dev_err(&pf->pdev->dev, "pf->vsi[%d] is NULL, just free vsi[%d](%p,type %d)\n",
6618 vsi->idx, vsi->idx, vsi, vsi->type);
6622 if (pf->vsi[vsi->idx] != vsi) {
6623 dev_err(&pf->pdev->dev,
6624 "pf->vsi[%d](%p, type %d) != vsi[%d](%p,type %d): no free!\n",
6625 pf->vsi[vsi->idx]->idx,
6627 pf->vsi[vsi->idx]->type,
6628 vsi->idx, vsi, vsi->type);
6632 /* updates the pf for this cleared vsi */
6633 i40e_put_lump(pf->qp_pile, vsi->base_queue, vsi->idx);
6634 i40e_put_lump(pf->irq_pile, vsi->base_vector, vsi->idx);
6636 i40e_vsi_free_arrays(vsi, true);
6638 pf->vsi[vsi->idx] = NULL;
6639 if (vsi->idx < pf->next_vsi)
6640 pf->next_vsi = vsi->idx;
6643 mutex_unlock(&pf->switch_mutex);
6651 * i40e_vsi_clear_rings - Deallocates the Rx and Tx rings for the provided VSI
6652 * @vsi: the VSI being cleaned
6654 static void i40e_vsi_clear_rings(struct i40e_vsi *vsi)
6658 if (vsi->tx_rings && vsi->tx_rings[0]) {
6659 for (i = 0; i < vsi->alloc_queue_pairs; i++) {
6660 kfree_rcu(vsi->tx_rings[i], rcu);
6661 vsi->tx_rings[i] = NULL;
6662 vsi->rx_rings[i] = NULL;
6668 * i40e_alloc_rings - Allocates the Rx and Tx rings for the provided VSI
6669 * @vsi: the VSI being configured
6671 static int i40e_alloc_rings(struct i40e_vsi *vsi)
6673 struct i40e_ring *tx_ring, *rx_ring;
6674 struct i40e_pf *pf = vsi->back;
6677 /* Set basic values in the rings to be used later during open() */
6678 for (i = 0; i < vsi->alloc_queue_pairs; i++) {
6679 /* allocate space for both Tx and Rx in one shot */
6680 tx_ring = kzalloc(sizeof(struct i40e_ring) * 2, GFP_KERNEL);
6684 tx_ring->queue_index = i;
6685 tx_ring->reg_idx = vsi->base_queue + i;
6686 tx_ring->ring_active = false;
6688 tx_ring->netdev = vsi->netdev;
6689 tx_ring->dev = &pf->pdev->dev;
6690 tx_ring->count = vsi->num_desc;
6692 tx_ring->dcb_tc = 0;
6693 vsi->tx_rings[i] = tx_ring;
6695 rx_ring = &tx_ring[1];
6696 rx_ring->queue_index = i;
6697 rx_ring->reg_idx = vsi->base_queue + i;
6698 rx_ring->ring_active = false;
6700 rx_ring->netdev = vsi->netdev;
6701 rx_ring->dev = &pf->pdev->dev;
6702 rx_ring->count = vsi->num_desc;
6704 rx_ring->dcb_tc = 0;
6705 if (pf->flags & I40E_FLAG_16BYTE_RX_DESC_ENABLED)
6706 set_ring_16byte_desc_enabled(rx_ring);
6708 clear_ring_16byte_desc_enabled(rx_ring);
6709 vsi->rx_rings[i] = rx_ring;
6715 i40e_vsi_clear_rings(vsi);
6720 * i40e_reserve_msix_vectors - Reserve MSI-X vectors in the kernel
6721 * @pf: board private structure
6722 * @vectors: the number of MSI-X vectors to request
6724 * Returns the number of vectors reserved, or error
6726 static int i40e_reserve_msix_vectors(struct i40e_pf *pf, int vectors)
6728 vectors = pci_enable_msix_range(pf->pdev, pf->msix_entries,
6729 I40E_MIN_MSIX, vectors);
6731 dev_info(&pf->pdev->dev,
6732 "MSI-X vector reservation failed: %d\n", vectors);
6740 * i40e_init_msix - Setup the MSIX capability
6741 * @pf: board private structure
6743 * Work with the OS to set up the MSIX vectors needed.
6745 * Returns 0 on success, negative on failure
6747 static int i40e_init_msix(struct i40e_pf *pf)
6749 i40e_status err = 0;
6750 struct i40e_hw *hw = &pf->hw;
6755 if (!(pf->flags & I40E_FLAG_MSIX_ENABLED))
6758 /* The number of vectors we'll request will be comprised of:
6759 * - Add 1 for "other" cause for Admin Queue events, etc.
6760 * - The number of LAN queue pairs
6761 * - Queues being used for RSS.
6762 * We don't need as many as max_rss_size vectors.
6763 * use rss_size instead in the calculation since that
6764 * is governed by number of cpus in the system.
6765 * - assumes symmetric Tx/Rx pairing
6766 * - The number of VMDq pairs
6768 * - The number of FCOE qps.
6770 * Once we count this up, try the request.
6772 * If we can't get what we want, we'll simplify to nearly nothing
6773 * and try again. If that still fails, we punt.
6775 pf->num_lan_msix = pf->num_lan_qps - (pf->rss_size_max - pf->rss_size);
6776 pf->num_vmdq_msix = pf->num_vmdq_qps;
6778 other_vecs += (pf->num_vmdq_vsis * pf->num_vmdq_msix);
6779 if (pf->flags & I40E_FLAG_FD_SB_ENABLED)
6783 if (pf->flags & I40E_FLAG_FCOE_ENABLED) {
6784 pf->num_fcoe_msix = pf->num_fcoe_qps;
6785 v_budget += pf->num_fcoe_msix;
6789 /* Scale down if necessary, and the rings will share vectors */
6790 pf->num_lan_msix = min_t(int, pf->num_lan_msix,
6791 (hw->func_caps.num_msix_vectors - other_vecs));
6792 v_budget = pf->num_lan_msix + other_vecs;
6794 pf->msix_entries = kcalloc(v_budget, sizeof(struct msix_entry),
6796 if (!pf->msix_entries)
6799 for (i = 0; i < v_budget; i++)
6800 pf->msix_entries[i].entry = i;
6801 vec = i40e_reserve_msix_vectors(pf, v_budget);
6803 if (vec != v_budget) {
6804 /* If we have limited resources, we will start with no vectors
6805 * for the special features and then allocate vectors to some
6806 * of these features based on the policy and at the end disable
6807 * the features that did not get any vectors.
6810 pf->num_fcoe_qps = 0;
6811 pf->num_fcoe_msix = 0;
6813 pf->num_vmdq_msix = 0;
6816 if (vec < I40E_MIN_MSIX) {
6817 pf->flags &= ~I40E_FLAG_MSIX_ENABLED;
6818 kfree(pf->msix_entries);
6819 pf->msix_entries = NULL;
6822 } else if (vec == I40E_MIN_MSIX) {
6823 /* Adjust for minimal MSIX use */
6824 pf->num_vmdq_vsis = 0;
6825 pf->num_vmdq_qps = 0;
6826 pf->num_lan_qps = 1;
6827 pf->num_lan_msix = 1;
6829 } else if (vec != v_budget) {
6830 /* reserve the misc vector */
6833 /* Scale vector usage down */
6834 pf->num_vmdq_msix = 1; /* force VMDqs to only one vector */
6835 pf->num_vmdq_vsis = 1;
6837 /* partition out the remaining vectors */
6840 pf->num_lan_msix = 1;
6844 /* give one vector to FCoE */
6845 if (pf->flags & I40E_FLAG_FCOE_ENABLED) {
6846 pf->num_lan_msix = 1;
6847 pf->num_fcoe_msix = 1;
6850 pf->num_lan_msix = 2;
6855 /* give one vector to FCoE */
6856 if (pf->flags & I40E_FLAG_FCOE_ENABLED) {
6857 pf->num_fcoe_msix = 1;
6861 pf->num_lan_msix = min_t(int, (vec / 2),
6863 pf->num_vmdq_vsis = min_t(int, (vec - pf->num_lan_msix),
6864 I40E_DEFAULT_NUM_VMDQ_VSI);
6869 if ((pf->flags & I40E_FLAG_VMDQ_ENABLED) &&
6870 (pf->num_vmdq_msix == 0)) {
6871 dev_info(&pf->pdev->dev, "VMDq disabled, not enough MSI-X vectors\n");
6872 pf->flags &= ~I40E_FLAG_VMDQ_ENABLED;
6876 if ((pf->flags & I40E_FLAG_FCOE_ENABLED) && (pf->num_fcoe_msix == 0)) {
6877 dev_info(&pf->pdev->dev, "FCOE disabled, not enough MSI-X vectors\n");
6878 pf->flags &= ~I40E_FLAG_FCOE_ENABLED;
6885 * i40e_vsi_alloc_q_vector - Allocate memory for a single interrupt vector
6886 * @vsi: the VSI being configured
6887 * @v_idx: index of the vector in the vsi struct
6889 * We allocate one q_vector. If allocation fails we return -ENOMEM.
6891 static int i40e_vsi_alloc_q_vector(struct i40e_vsi *vsi, int v_idx)
6893 struct i40e_q_vector *q_vector;
6895 /* allocate q_vector */
6896 q_vector = kzalloc(sizeof(struct i40e_q_vector), GFP_KERNEL);
6900 q_vector->vsi = vsi;
6901 q_vector->v_idx = v_idx;
6902 cpumask_set_cpu(v_idx, &q_vector->affinity_mask);
6904 netif_napi_add(vsi->netdev, &q_vector->napi,
6905 i40e_napi_poll, NAPI_POLL_WEIGHT);
6907 q_vector->rx.latency_range = I40E_LOW_LATENCY;
6908 q_vector->tx.latency_range = I40E_LOW_LATENCY;
6910 /* tie q_vector and vsi together */
6911 vsi->q_vectors[v_idx] = q_vector;
6917 * i40e_vsi_alloc_q_vectors - Allocate memory for interrupt vectors
6918 * @vsi: the VSI being configured
6920 * We allocate one q_vector per queue interrupt. If allocation fails we
6923 static int i40e_vsi_alloc_q_vectors(struct i40e_vsi *vsi)
6925 struct i40e_pf *pf = vsi->back;
6926 int v_idx, num_q_vectors;
6929 /* if not MSIX, give the one vector only to the LAN VSI */
6930 if (pf->flags & I40E_FLAG_MSIX_ENABLED)
6931 num_q_vectors = vsi->num_q_vectors;
6932 else if (vsi == pf->vsi[pf->lan_vsi])
6937 for (v_idx = 0; v_idx < num_q_vectors; v_idx++) {
6938 err = i40e_vsi_alloc_q_vector(vsi, v_idx);
6947 i40e_free_q_vector(vsi, v_idx);
6953 * i40e_init_interrupt_scheme - Determine proper interrupt scheme
6954 * @pf: board private structure to initialize
6956 static void i40e_init_interrupt_scheme(struct i40e_pf *pf)
6960 if (pf->flags & I40E_FLAG_MSIX_ENABLED) {
6961 err = i40e_init_msix(pf);
6963 pf->flags &= ~(I40E_FLAG_MSIX_ENABLED |
6965 I40E_FLAG_FCOE_ENABLED |
6967 I40E_FLAG_RSS_ENABLED |
6968 I40E_FLAG_DCB_CAPABLE |
6969 I40E_FLAG_SRIOV_ENABLED |
6970 I40E_FLAG_FD_SB_ENABLED |
6971 I40E_FLAG_FD_ATR_ENABLED |
6972 I40E_FLAG_VMDQ_ENABLED);
6974 /* rework the queue expectations without MSIX */
6975 i40e_determine_queue_usage(pf);
6979 if (!(pf->flags & I40E_FLAG_MSIX_ENABLED) &&
6980 (pf->flags & I40E_FLAG_MSI_ENABLED)) {
6981 dev_info(&pf->pdev->dev, "MSI-X not available, trying MSI\n");
6982 err = pci_enable_msi(pf->pdev);
6984 dev_info(&pf->pdev->dev, "MSI init failed - %d\n", err);
6985 pf->flags &= ~I40E_FLAG_MSI_ENABLED;
6989 if (!(pf->flags & (I40E_FLAG_MSIX_ENABLED | I40E_FLAG_MSI_ENABLED)))
6990 dev_info(&pf->pdev->dev, "MSI-X and MSI not available, falling back to Legacy IRQ\n");
6992 /* track first vector for misc interrupts */
6993 err = i40e_get_lump(pf, pf->irq_pile, 1, I40E_PILE_VALID_BIT-1);
6997 * i40e_setup_misc_vector - Setup the misc vector to handle non queue events
6998 * @pf: board private structure
7000 * This sets up the handler for MSIX 0, which is used to manage the
7001 * non-queue interrupts, e.g. AdminQ and errors. This is not used
7002 * when in MSI or Legacy interrupt mode.
7004 static int i40e_setup_misc_vector(struct i40e_pf *pf)
7006 struct i40e_hw *hw = &pf->hw;
7009 /* Only request the irq if this is the first time through, and
7010 * not when we're rebuilding after a Reset
7012 if (!test_bit(__I40E_RESET_RECOVERY_PENDING, &pf->state)) {
7013 err = request_irq(pf->msix_entries[0].vector,
7014 i40e_intr, 0, pf->misc_int_name, pf);
7016 dev_info(&pf->pdev->dev,
7017 "request_irq for %s failed: %d\n",
7018 pf->misc_int_name, err);
7023 i40e_enable_misc_int_causes(hw);
7025 /* associate no queues to the misc vector */
7026 wr32(hw, I40E_PFINT_LNKLST0, I40E_QUEUE_END_OF_LIST);
7027 wr32(hw, I40E_PFINT_ITR0(I40E_RX_ITR), I40E_ITR_8K);
7031 i40e_irq_dynamic_enable_icr0(pf);
7037 * i40e_config_rss - Prepare for RSS if used
7038 * @pf: board private structure
7040 static int i40e_config_rss(struct i40e_pf *pf)
7042 u32 rss_key[I40E_PFQF_HKEY_MAX_INDEX + 1];
7043 struct i40e_hw *hw = &pf->hw;
7049 netdev_rss_key_fill(rss_key, sizeof(rss_key));
7050 for (i = 0; i <= I40E_PFQF_HKEY_MAX_INDEX; i++)
7051 wr32(hw, I40E_PFQF_HKEY(i), rss_key[i]);
7053 /* By default we enable TCP/UDP with IPv4/IPv6 ptypes */
7054 hena = (u64)rd32(hw, I40E_PFQF_HENA(0)) |
7055 ((u64)rd32(hw, I40E_PFQF_HENA(1)) << 32);
7056 hena |= I40E_DEFAULT_RSS_HENA;
7057 wr32(hw, I40E_PFQF_HENA(0), (u32)hena);
7058 wr32(hw, I40E_PFQF_HENA(1), (u32)(hena >> 32));
7060 /* Check capability and Set table size and register per hw expectation*/
7061 reg_val = rd32(hw, I40E_PFQF_CTL_0);
7062 if (hw->func_caps.rss_table_size == 512) {
7063 reg_val |= I40E_PFQF_CTL_0_HASHLUTSIZE_512;
7064 pf->rss_table_size = 512;
7066 pf->rss_table_size = 128;
7067 reg_val &= ~I40E_PFQF_CTL_0_HASHLUTSIZE_512;
7069 wr32(hw, I40E_PFQF_CTL_0, reg_val);
7071 /* Populate the LUT with max no. of queues in round robin fashion */
7072 for (i = 0, j = 0; i < pf->rss_table_size; i++, j++) {
7074 /* The assumption is that lan qp count will be the highest
7075 * qp count for any PF VSI that needs RSS.
7076 * If multiple VSIs need RSS support, all the qp counts
7077 * for those VSIs should be a power of 2 for RSS to work.
7078 * If LAN VSI is the only consumer for RSS then this requirement
7081 if (j == pf->rss_size)
7083 /* lut = 4-byte sliding window of 4 lut entries */
7084 lut = (lut << 8) | (j &
7085 ((0x1 << pf->hw.func_caps.rss_table_entry_width) - 1));
7086 /* On i = 3, we have 4 entries in lut; write to the register */
7088 wr32(hw, I40E_PFQF_HLUT(i >> 2), lut);
7096 * i40e_reconfig_rss_queues - change number of queues for rss and rebuild
7097 * @pf: board private structure
7098 * @queue_count: the requested queue count for rss.
7100 * returns 0 if rss is not enabled, if enabled returns the final rss queue
7101 * count which may be different from the requested queue count.
7103 int i40e_reconfig_rss_queues(struct i40e_pf *pf, int queue_count)
7105 if (!(pf->flags & I40E_FLAG_RSS_ENABLED))
7108 queue_count = min_t(int, queue_count, pf->rss_size_max);
7110 if (queue_count != pf->rss_size) {
7111 i40e_prep_for_reset(pf);
7113 pf->rss_size = queue_count;
7115 i40e_reset_and_rebuild(pf, true);
7116 i40e_config_rss(pf);
7118 dev_info(&pf->pdev->dev, "RSS count: %d\n", pf->rss_size);
7119 return pf->rss_size;
7123 * i40e_sw_init - Initialize general software structures (struct i40e_pf)
7124 * @pf: board private structure to initialize
7126 * i40e_sw_init initializes the Adapter private data structure.
7127 * Fields are initialized based on PCI device information and
7128 * OS network device settings (MTU size).
7130 static int i40e_sw_init(struct i40e_pf *pf)
7135 pf->msg_enable = netif_msg_init(I40E_DEFAULT_MSG_ENABLE,
7136 (NETIF_MSG_DRV|NETIF_MSG_PROBE|NETIF_MSG_LINK));
7137 pf->hw.debug_mask = pf->msg_enable | I40E_DEBUG_DIAG;
7138 if (debug != -1 && debug != I40E_DEFAULT_MSG_ENABLE) {
7139 if (I40E_DEBUG_USER & debug)
7140 pf->hw.debug_mask = debug;
7141 pf->msg_enable = netif_msg_init((debug & ~I40E_DEBUG_USER),
7142 I40E_DEFAULT_MSG_ENABLE);
7145 /* Set default capability flags */
7146 pf->flags = I40E_FLAG_RX_CSUM_ENABLED |
7147 I40E_FLAG_MSI_ENABLED |
7148 I40E_FLAG_MSIX_ENABLED |
7149 I40E_FLAG_RX_1BUF_ENABLED;
7151 /* Set default ITR */
7152 pf->rx_itr_default = I40E_ITR_DYNAMIC | I40E_ITR_RX_DEF;
7153 pf->tx_itr_default = I40E_ITR_DYNAMIC | I40E_ITR_TX_DEF;
7155 /* Depending on PF configurations, it is possible that the RSS
7156 * maximum might end up larger than the available queues
7158 pf->rss_size_max = 0x1 << pf->hw.func_caps.rss_table_entry_width;
7160 pf->rss_size_max = min_t(int, pf->rss_size_max,
7161 pf->hw.func_caps.num_tx_qp);
7162 if (pf->hw.func_caps.rss) {
7163 pf->flags |= I40E_FLAG_RSS_ENABLED;
7164 pf->rss_size = min_t(int, pf->rss_size_max, num_online_cpus());
7167 /* MFP mode enabled */
7168 if (pf->hw.func_caps.npar_enable || pf->hw.func_caps.mfp_mode_1) {
7169 pf->flags |= I40E_FLAG_MFP_ENABLED;
7170 dev_info(&pf->pdev->dev, "MFP mode Enabled\n");
7173 /* FW/NVM is not yet fixed in this regard */
7174 if ((pf->hw.func_caps.fd_filters_guaranteed > 0) ||
7175 (pf->hw.func_caps.fd_filters_best_effort > 0)) {
7176 pf->flags |= I40E_FLAG_FD_ATR_ENABLED;
7177 pf->atr_sample_rate = I40E_DEFAULT_ATR_SAMPLE_RATE;
7178 /* Setup a counter for fd_atr per pf */
7179 pf->fd_atr_cnt_idx = I40E_FD_ATR_STAT_IDX(pf->hw.pf_id);
7180 if (!(pf->flags & I40E_FLAG_MFP_ENABLED)) {
7181 pf->flags |= I40E_FLAG_FD_SB_ENABLED;
7182 /* Setup a counter for fd_sb per pf */
7183 pf->fd_sb_cnt_idx = I40E_FD_SB_STAT_IDX(pf->hw.pf_id);
7185 dev_info(&pf->pdev->dev,
7186 "Flow Director Sideband mode Disabled in MFP mode\n");
7188 pf->fdir_pf_filter_count =
7189 pf->hw.func_caps.fd_filters_guaranteed;
7190 pf->hw.fdir_shared_filter_count =
7191 pf->hw.func_caps.fd_filters_best_effort;
7194 if (pf->hw.func_caps.vmdq) {
7195 pf->flags |= I40E_FLAG_VMDQ_ENABLED;
7196 pf->num_vmdq_vsis = I40E_DEFAULT_NUM_VMDQ_VSI;
7197 pf->num_vmdq_qps = I40E_DEFAULT_QUEUES_PER_VMDQ;
7201 err = i40e_init_pf_fcoe(pf);
7203 dev_info(&pf->pdev->dev, "init_pf_fcoe failed: %d\n", err);
7205 #endif /* I40E_FCOE */
7206 #ifdef CONFIG_PCI_IOV
7207 if (pf->hw.func_caps.num_vfs) {
7208 pf->num_vf_qps = I40E_DEFAULT_QUEUES_PER_VF;
7209 pf->flags |= I40E_FLAG_SRIOV_ENABLED;
7210 pf->num_req_vfs = min_t(int,
7211 pf->hw.func_caps.num_vfs,
7214 #endif /* CONFIG_PCI_IOV */
7215 pf->eeprom_version = 0xDEAD;
7216 pf->lan_veb = I40E_NO_VEB;
7217 pf->lan_vsi = I40E_NO_VSI;
7219 /* set up queue assignment tracking */
7220 size = sizeof(struct i40e_lump_tracking)
7221 + (sizeof(u16) * pf->hw.func_caps.num_tx_qp);
7222 pf->qp_pile = kzalloc(size, GFP_KERNEL);
7227 pf->qp_pile->num_entries = pf->hw.func_caps.num_tx_qp;
7228 pf->qp_pile->search_hint = 0;
7230 /* set up vector assignment tracking */
7231 size = sizeof(struct i40e_lump_tracking)
7232 + (sizeof(u16) * pf->hw.func_caps.num_msix_vectors);
7233 pf->irq_pile = kzalloc(size, GFP_KERNEL);
7234 if (!pf->irq_pile) {
7239 pf->irq_pile->num_entries = pf->hw.func_caps.num_msix_vectors;
7240 pf->irq_pile->search_hint = 0;
7242 pf->tx_timeout_recovery_level = 1;
7244 mutex_init(&pf->switch_mutex);
7251 * i40e_set_ntuple - set the ntuple feature flag and take action
7252 * @pf: board private structure to initialize
7253 * @features: the feature set that the stack is suggesting
7255 * returns a bool to indicate if reset needs to happen
7257 bool i40e_set_ntuple(struct i40e_pf *pf, netdev_features_t features)
7259 bool need_reset = false;
7261 /* Check if Flow Director n-tuple support was enabled or disabled. If
7262 * the state changed, we need to reset.
7264 if (features & NETIF_F_NTUPLE) {
7265 /* Enable filters and mark for reset */
7266 if (!(pf->flags & I40E_FLAG_FD_SB_ENABLED))
7268 pf->flags |= I40E_FLAG_FD_SB_ENABLED;
7270 /* turn off filters, mark for reset and clear SW filter list */
7271 if (pf->flags & I40E_FLAG_FD_SB_ENABLED) {
7273 i40e_fdir_filter_exit(pf);
7275 pf->flags &= ~I40E_FLAG_FD_SB_ENABLED;
7276 pf->auto_disable_flags &= ~I40E_FLAG_FD_SB_ENABLED;
7277 /* reset fd counters */
7278 pf->fd_add_err = pf->fd_atr_cnt = pf->fd_tcp_rule = 0;
7279 pf->fdir_pf_active_filters = 0;
7280 pf->flags |= I40E_FLAG_FD_ATR_ENABLED;
7281 dev_info(&pf->pdev->dev, "ATR re-enabled.\n");
7282 /* if ATR was auto disabled it can be re-enabled. */
7283 if ((pf->flags & I40E_FLAG_FD_ATR_ENABLED) &&
7284 (pf->auto_disable_flags & I40E_FLAG_FD_ATR_ENABLED))
7285 pf->auto_disable_flags &= ~I40E_FLAG_FD_ATR_ENABLED;
7291 * i40e_set_features - set the netdev feature flags
7292 * @netdev: ptr to the netdev being adjusted
7293 * @features: the feature set that the stack is suggesting
7295 static int i40e_set_features(struct net_device *netdev,
7296 netdev_features_t features)
7298 struct i40e_netdev_priv *np = netdev_priv(netdev);
7299 struct i40e_vsi *vsi = np->vsi;
7300 struct i40e_pf *pf = vsi->back;
7303 if (features & NETIF_F_HW_VLAN_CTAG_RX)
7304 i40e_vlan_stripping_enable(vsi);
7306 i40e_vlan_stripping_disable(vsi);
7308 need_reset = i40e_set_ntuple(pf, features);
7311 i40e_do_reset(pf, (1 << __I40E_PF_RESET_REQUESTED));
7316 #ifdef CONFIG_I40E_VXLAN
7318 * i40e_get_vxlan_port_idx - Lookup a possibly offloaded for Rx UDP port
7319 * @pf: board private structure
7320 * @port: The UDP port to look up
7322 * Returns the index number or I40E_MAX_PF_UDP_OFFLOAD_PORTS if port not found
7324 static u8 i40e_get_vxlan_port_idx(struct i40e_pf *pf, __be16 port)
7328 for (i = 0; i < I40E_MAX_PF_UDP_OFFLOAD_PORTS; i++) {
7329 if (pf->vxlan_ports[i] == port)
7337 * i40e_add_vxlan_port - Get notifications about VXLAN ports that come up
7338 * @netdev: This physical port's netdev
7339 * @sa_family: Socket Family that VXLAN is notifying us about
7340 * @port: New UDP port number that VXLAN started listening to
7342 static void i40e_add_vxlan_port(struct net_device *netdev,
7343 sa_family_t sa_family, __be16 port)
7345 struct i40e_netdev_priv *np = netdev_priv(netdev);
7346 struct i40e_vsi *vsi = np->vsi;
7347 struct i40e_pf *pf = vsi->back;
7351 if (sa_family == AF_INET6)
7354 idx = i40e_get_vxlan_port_idx(pf, port);
7356 /* Check if port already exists */
7357 if (idx < I40E_MAX_PF_UDP_OFFLOAD_PORTS) {
7358 netdev_info(netdev, "Port %d already offloaded\n", ntohs(port));
7362 /* Now check if there is space to add the new port */
7363 next_idx = i40e_get_vxlan_port_idx(pf, 0);
7365 if (next_idx == I40E_MAX_PF_UDP_OFFLOAD_PORTS) {
7366 netdev_info(netdev, "Maximum number of UDP ports reached, not adding port %d\n",
7371 /* New port: add it and mark its index in the bitmap */
7372 pf->vxlan_ports[next_idx] = port;
7373 pf->pending_vxlan_bitmap |= (1 << next_idx);
7375 pf->flags |= I40E_FLAG_VXLAN_FILTER_SYNC;
7379 * i40e_del_vxlan_port - Get notifications about VXLAN ports that go away
7380 * @netdev: This physical port's netdev
7381 * @sa_family: Socket Family that VXLAN is notifying us about
7382 * @port: UDP port number that VXLAN stopped listening to
7384 static void i40e_del_vxlan_port(struct net_device *netdev,
7385 sa_family_t sa_family, __be16 port)
7387 struct i40e_netdev_priv *np = netdev_priv(netdev);
7388 struct i40e_vsi *vsi = np->vsi;
7389 struct i40e_pf *pf = vsi->back;
7392 if (sa_family == AF_INET6)
7395 idx = i40e_get_vxlan_port_idx(pf, port);
7397 /* Check if port already exists */
7398 if (idx < I40E_MAX_PF_UDP_OFFLOAD_PORTS) {
7399 /* if port exists, set it to 0 (mark for deletion)
7400 * and make it pending
7402 pf->vxlan_ports[idx] = 0;
7404 pf->pending_vxlan_bitmap |= (1 << idx);
7406 pf->flags |= I40E_FLAG_VXLAN_FILTER_SYNC;
7408 netdev_warn(netdev, "Port %d was not found, not deleting\n",
7414 static int i40e_get_phys_port_id(struct net_device *netdev,
7415 struct netdev_phys_port_id *ppid)
7417 struct i40e_netdev_priv *np = netdev_priv(netdev);
7418 struct i40e_pf *pf = np->vsi->back;
7419 struct i40e_hw *hw = &pf->hw;
7421 if (!(pf->flags & I40E_FLAG_PORT_ID_VALID))
7424 ppid->id_len = min_t(int, sizeof(hw->mac.port_addr), sizeof(ppid->id));
7425 memcpy(ppid->id, hw->mac.port_addr, ppid->id_len);
7431 #ifdef USE_CONST_DEV_UC_CHAR
7432 static int i40e_ndo_fdb_add(struct ndmsg *ndm, struct nlattr *tb[],
7433 struct net_device *dev,
7434 const unsigned char *addr,
7437 static int i40e_ndo_fdb_add(struct ndmsg *ndm,
7438 struct net_device *dev,
7439 unsigned char *addr,
7443 struct i40e_netdev_priv *np = netdev_priv(dev);
7444 struct i40e_pf *pf = np->vsi->back;
7447 if (!(pf->flags & I40E_FLAG_SRIOV_ENABLED))
7450 /* Hardware does not support aging addresses so if a
7451 * ndm_state is given only allow permanent addresses
7453 if (ndm->ndm_state && !(ndm->ndm_state & NUD_PERMANENT)) {
7454 netdev_info(dev, "FDB only supports static addresses\n");
7458 if (is_unicast_ether_addr(addr) || is_link_local_ether_addr(addr))
7459 err = dev_uc_add_excl(dev, addr);
7460 else if (is_multicast_ether_addr(addr))
7461 err = dev_mc_add_excl(dev, addr);
7465 /* Only return duplicate errors if NLM_F_EXCL is set */
7466 if (err == -EEXIST && !(flags & NLM_F_EXCL))
7472 #ifndef USE_DEFAULT_FDB_DEL_DUMP
7473 #ifdef USE_CONST_DEV_UC_CHAR
7474 static int i40e_ndo_fdb_del(struct ndmsg *ndm,
7475 struct net_device *dev,
7476 const unsigned char *addr)
7478 static int i40e_ndo_fdb_del(struct ndmsg *ndm,
7479 struct net_device *dev,
7480 unsigned char *addr)
7483 struct i40e_netdev_priv *np = netdev_priv(dev);
7484 struct i40e_pf *pf = np->vsi->back;
7485 int err = -EOPNOTSUPP;
7487 if (ndm->ndm_state & NUD_PERMANENT) {
7488 netdev_info(dev, "FDB only supports static addresses\n");
7492 if (pf->flags & I40E_FLAG_SRIOV_ENABLED) {
7493 if (is_unicast_ether_addr(addr))
7494 err = dev_uc_del(dev, addr);
7495 else if (is_multicast_ether_addr(addr))
7496 err = dev_mc_del(dev, addr);
7504 static int i40e_ndo_fdb_dump(struct sk_buff *skb,
7505 struct netlink_callback *cb,
7506 struct net_device *dev,
7507 struct net_device *filter_dev,
7510 struct i40e_netdev_priv *np = netdev_priv(dev);
7511 struct i40e_pf *pf = np->vsi->back;
7513 if (pf->flags & I40E_FLAG_SRIOV_ENABLED)
7514 idx = ndo_dflt_fdb_dump(skb, cb, dev, filter_dev, idx);
7519 #endif /* USE_DEFAULT_FDB_DEL_DUMP */
7520 #endif /* HAVE_FDB_OPS */
7521 static const struct net_device_ops i40e_netdev_ops = {
7522 .ndo_open = i40e_open,
7523 .ndo_stop = i40e_close,
7524 .ndo_start_xmit = i40e_lan_xmit_frame,
7525 .ndo_get_stats64 = i40e_get_netdev_stats_struct,
7526 .ndo_set_rx_mode = i40e_set_rx_mode,
7527 .ndo_validate_addr = eth_validate_addr,
7528 .ndo_set_mac_address = i40e_set_mac,
7529 .ndo_change_mtu = i40e_change_mtu,
7530 .ndo_do_ioctl = i40e_ioctl,
7531 .ndo_tx_timeout = i40e_tx_timeout,
7532 .ndo_vlan_rx_add_vid = i40e_vlan_rx_add_vid,
7533 .ndo_vlan_rx_kill_vid = i40e_vlan_rx_kill_vid,
7534 #ifdef CONFIG_NET_POLL_CONTROLLER
7535 .ndo_poll_controller = i40e_netpoll,
7537 .ndo_setup_tc = i40e_setup_tc,
7539 .ndo_fcoe_enable = i40e_fcoe_enable,
7540 .ndo_fcoe_disable = i40e_fcoe_disable,
7542 .ndo_set_features = i40e_set_features,
7543 .ndo_set_vf_mac = i40e_ndo_set_vf_mac,
7544 .ndo_set_vf_vlan = i40e_ndo_set_vf_port_vlan,
7545 .ndo_set_vf_rate = i40e_ndo_set_vf_bw,
7546 .ndo_get_vf_config = i40e_ndo_get_vf_config,
7547 .ndo_set_vf_link_state = i40e_ndo_set_vf_link_state,
7548 .ndo_set_vf_spoofchk = i40e_ndo_set_vf_spoofchk,
7549 #ifdef CONFIG_I40E_VXLAN
7550 .ndo_add_vxlan_port = i40e_add_vxlan_port,
7551 .ndo_del_vxlan_port = i40e_del_vxlan_port,
7553 .ndo_get_phys_port_id = i40e_get_phys_port_id,
7555 .ndo_fdb_add = i40e_ndo_fdb_add,
7556 #ifndef USE_DEFAULT_FDB_DEL_DUMP
7557 .ndo_fdb_del = i40e_ndo_fdb_del,
7558 .ndo_fdb_dump = i40e_ndo_fdb_dump,
7564 * i40e_config_netdev - Setup the netdev flags
7565 * @vsi: the VSI being configured
7567 * Returns 0 on success, negative value on failure
7569 static int i40e_config_netdev(struct i40e_vsi *vsi)
7571 u8 brdcast[ETH_ALEN] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff};
7572 struct i40e_pf *pf = vsi->back;
7573 struct i40e_hw *hw = &pf->hw;
7574 struct i40e_netdev_priv *np;
7575 struct net_device *netdev;
7576 u8 mac_addr[ETH_ALEN];
7579 etherdev_size = sizeof(struct i40e_netdev_priv);
7580 netdev = alloc_etherdev_mq(etherdev_size, vsi->alloc_queue_pairs);
7584 vsi->netdev = netdev;
7585 np = netdev_priv(netdev);
7588 netdev->hw_enc_features |= NETIF_F_IP_CSUM |
7589 NETIF_F_GSO_UDP_TUNNEL |
7592 netdev->features = NETIF_F_SG |
7596 NETIF_F_GSO_UDP_TUNNEL |
7597 NETIF_F_HW_VLAN_CTAG_TX |
7598 NETIF_F_HW_VLAN_CTAG_RX |
7599 NETIF_F_HW_VLAN_CTAG_FILTER |
7608 if (!(pf->flags & I40E_FLAG_MFP_ENABLED))
7609 netdev->features |= NETIF_F_NTUPLE;
7611 /* copy netdev features into list of user selectable features */
7612 netdev->hw_features |= netdev->features;
7614 if (vsi->type == I40E_VSI_MAIN) {
7615 SET_NETDEV_DEV(netdev, &pf->pdev->dev);
7616 ether_addr_copy(mac_addr, hw->mac.perm_addr);
7617 /* The following steps are necessary to prevent reception
7618 * of tagged packets - some older NVM configurations load a
7619 * default a MAC-VLAN filter that accepts any tagged packet
7620 * which must be replaced by a normal filter.
7622 if (!i40e_rm_default_mac_filter(vsi, mac_addr))
7623 i40e_add_filter(vsi, mac_addr,
7624 I40E_VLAN_ANY, false, true);
7626 /* relate the VSI_VMDQ name to the VSI_MAIN name */
7627 snprintf(netdev->name, IFNAMSIZ, "%sv%%d",
7628 pf->vsi[pf->lan_vsi]->netdev->name);
7629 random_ether_addr(mac_addr);
7630 i40e_add_filter(vsi, mac_addr, I40E_VLAN_ANY, false, false);
7632 i40e_add_filter(vsi, brdcast, I40E_VLAN_ANY, false, false);
7634 ether_addr_copy(netdev->dev_addr, mac_addr);
7635 ether_addr_copy(netdev->perm_addr, mac_addr);
7636 /* vlan gets same features (except vlan offload)
7637 * after any tweaks for specific VSI types
7639 netdev->vlan_features = netdev->features & ~(NETIF_F_HW_VLAN_CTAG_TX |
7640 NETIF_F_HW_VLAN_CTAG_RX |
7641 NETIF_F_HW_VLAN_CTAG_FILTER);
7642 netdev->priv_flags |= IFF_UNICAST_FLT;
7643 netdev->priv_flags |= IFF_SUPP_NOFCS;
7644 /* Setup netdev TC information */
7645 i40e_vsi_config_netdev_tc(vsi, vsi->tc_config.enabled_tc);
7647 netdev->netdev_ops = &i40e_netdev_ops;
7648 netdev->watchdog_timeo = 5 * HZ;
7649 i40e_set_ethtool_ops(netdev);
7651 i40e_fcoe_config_netdev(netdev, vsi);
7658 * i40e_vsi_delete - Delete a VSI from the switch
7659 * @vsi: the VSI being removed
7661 * Returns 0 on success, negative value on failure
7663 static void i40e_vsi_delete(struct i40e_vsi *vsi)
7665 /* remove default VSI is not allowed */
7666 if (vsi == vsi->back->vsi[vsi->back->lan_vsi])
7669 i40e_aq_delete_element(&vsi->back->hw, vsi->seid, NULL);
7673 * i40e_add_vsi - Add a VSI to the switch
7674 * @vsi: the VSI being configured
7676 * This initializes a VSI context depending on the VSI type to be added and
7677 * passes it down to the add_vsi aq command.
7679 static int i40e_add_vsi(struct i40e_vsi *vsi)
7682 struct i40e_mac_filter *f, *ftmp;
7683 struct i40e_pf *pf = vsi->back;
7684 struct i40e_hw *hw = &pf->hw;
7685 struct i40e_vsi_context ctxt;
7686 u8 enabled_tc = 0x1; /* TC0 enabled */
7689 memset(&ctxt, 0, sizeof(ctxt));
7690 switch (vsi->type) {
7692 /* The PF's main VSI is already setup as part of the
7693 * device initialization, so we'll not bother with
7694 * the add_vsi call, but we will retrieve the current
7697 ctxt.seid = pf->main_vsi_seid;
7698 ctxt.pf_num = pf->hw.pf_id;
7700 ret = i40e_aq_get_vsi_params(&pf->hw, &ctxt, NULL);
7701 ctxt.flags = I40E_AQ_VSI_TYPE_PF;
7703 dev_info(&pf->pdev->dev,
7704 "couldn't get pf vsi config, err %d, aq_err %d\n",
7705 ret, pf->hw.aq.asq_last_status);
7708 memcpy(&vsi->info, &ctxt.info, sizeof(ctxt.info));
7709 vsi->info.valid_sections = 0;
7711 vsi->seid = ctxt.seid;
7712 vsi->id = ctxt.vsi_number;
7714 enabled_tc = i40e_pf_get_tc_map(pf);
7716 /* MFP mode setup queue map and update VSI */
7717 if (pf->flags & I40E_FLAG_MFP_ENABLED) {
7718 memset(&ctxt, 0, sizeof(ctxt));
7719 ctxt.seid = pf->main_vsi_seid;
7720 ctxt.pf_num = pf->hw.pf_id;
7722 i40e_vsi_setup_queue_map(vsi, &ctxt, enabled_tc, false);
7723 ret = i40e_aq_update_vsi_params(hw, &ctxt, NULL);
7725 dev_info(&pf->pdev->dev,
7726 "update vsi failed, aq_err=%d\n",
7727 pf->hw.aq.asq_last_status);
7731 /* update the local VSI info queue map */
7732 i40e_vsi_update_queue_map(vsi, &ctxt);
7733 vsi->info.valid_sections = 0;
7735 /* Default/Main VSI is only enabled for TC0
7736 * reconfigure it to enable all TCs that are
7737 * available on the port in SFP mode.
7739 ret = i40e_vsi_config_tc(vsi, enabled_tc);
7741 dev_info(&pf->pdev->dev,
7742 "failed to configure TCs for main VSI tc_map 0x%08x, err %d, aq_err %d\n",
7744 pf->hw.aq.asq_last_status);
7751 ctxt.pf_num = hw->pf_id;
7753 ctxt.uplink_seid = vsi->uplink_seid;
7754 ctxt.connection_type = 0x1; /* regular data port */
7755 ctxt.flags = I40E_AQ_VSI_TYPE_PF;
7756 i40e_vsi_setup_queue_map(vsi, &ctxt, enabled_tc, true);
7759 case I40E_VSI_VMDQ2:
7760 ctxt.pf_num = hw->pf_id;
7762 ctxt.uplink_seid = vsi->uplink_seid;
7763 ctxt.connection_type = 0x1; /* regular data port */
7764 ctxt.flags = I40E_AQ_VSI_TYPE_VMDQ2;
7766 ctxt.info.valid_sections |= cpu_to_le16(I40E_AQ_VSI_PROP_SWITCH_VALID);
7768 /* This VSI is connected to VEB so the switch_id
7769 * should be set to zero by default.
7771 ctxt.info.switch_id = 0;
7772 ctxt.info.switch_id |= cpu_to_le16(I40E_AQ_VSI_SW_ID_FLAG_ALLOW_LB);
7774 /* Setup the VSI tx/rx queue map for TC0 only for now */
7775 i40e_vsi_setup_queue_map(vsi, &ctxt, enabled_tc, true);
7778 case I40E_VSI_SRIOV:
7779 ctxt.pf_num = hw->pf_id;
7780 ctxt.vf_num = vsi->vf_id + hw->func_caps.vf_base_id;
7781 ctxt.uplink_seid = vsi->uplink_seid;
7782 ctxt.connection_type = 0x1; /* regular data port */
7783 ctxt.flags = I40E_AQ_VSI_TYPE_VF;
7785 ctxt.info.valid_sections |= cpu_to_le16(I40E_AQ_VSI_PROP_SWITCH_VALID);
7787 /* This VSI is connected to VEB so the switch_id
7788 * should be set to zero by default.
7790 ctxt.info.switch_id = cpu_to_le16(I40E_AQ_VSI_SW_ID_FLAG_ALLOW_LB);
7792 ctxt.info.valid_sections |= cpu_to_le16(I40E_AQ_VSI_PROP_VLAN_VALID);
7793 ctxt.info.port_vlan_flags |= I40E_AQ_VSI_PVLAN_MODE_ALL;
7794 if (pf->vf[vsi->vf_id].spoofchk) {
7795 ctxt.info.valid_sections |=
7796 cpu_to_le16(I40E_AQ_VSI_PROP_SECURITY_VALID);
7797 ctxt.info.sec_flags |=
7798 (I40E_AQ_VSI_SEC_FLAG_ENABLE_VLAN_CHK |
7799 I40E_AQ_VSI_SEC_FLAG_ENABLE_MAC_CHK);
7801 /* Setup the VSI tx/rx queue map for TC0 only for now */
7802 i40e_vsi_setup_queue_map(vsi, &ctxt, enabled_tc, true);
7807 ret = i40e_fcoe_vsi_init(vsi, &ctxt);
7809 dev_info(&pf->pdev->dev, "failed to initialize FCoE VSI\n");
7814 #endif /* I40E_FCOE */
7819 if (vsi->type != I40E_VSI_MAIN) {
7820 ret = i40e_aq_add_vsi(hw, &ctxt, NULL);
7822 dev_info(&vsi->back->pdev->dev,
7823 "add vsi failed, aq_err=%d\n",
7824 vsi->back->hw.aq.asq_last_status);
7828 memcpy(&vsi->info, &ctxt.info, sizeof(ctxt.info));
7829 vsi->info.valid_sections = 0;
7830 vsi->seid = ctxt.seid;
7831 vsi->id = ctxt.vsi_number;
7834 /* If macvlan filters already exist, force them to get loaded */
7835 list_for_each_entry_safe(f, ftmp, &vsi->mac_filter_list, list) {
7839 if (f->is_laa && vsi->type == I40E_VSI_MAIN) {
7840 struct i40e_aqc_remove_macvlan_element_data element;
7842 memset(&element, 0, sizeof(element));
7843 ether_addr_copy(element.mac_addr, f->macaddr);
7844 element.flags = I40E_AQC_MACVLAN_DEL_PERFECT_MATCH;
7845 ret = i40e_aq_remove_macvlan(hw, vsi->seid,
7848 /* some older FW has a different default */
7850 I40E_AQC_MACVLAN_DEL_IGNORE_VLAN;
7851 i40e_aq_remove_macvlan(hw, vsi->seid,
7855 i40e_aq_mac_address_write(hw,
7856 I40E_AQC_WRITE_TYPE_LAA_WOL,
7861 vsi->flags |= I40E_VSI_FLAG_FILTER_CHANGED;
7862 pf->flags |= I40E_FLAG_FILTER_SYNC;
7865 /* Update VSI BW information */
7866 ret = i40e_vsi_get_bw_info(vsi);
7868 dev_info(&pf->pdev->dev,
7869 "couldn't get vsi bw info, err %d, aq_err %d\n",
7870 ret, pf->hw.aq.asq_last_status);
7871 /* VSI is already added so not tearing that up */
7880 * i40e_vsi_release - Delete a VSI and free its resources
7881 * @vsi: the VSI being removed
7883 * Returns 0 on success or < 0 on error
7885 int i40e_vsi_release(struct i40e_vsi *vsi)
7887 struct i40e_mac_filter *f, *ftmp;
7888 struct i40e_veb *veb = NULL;
7895 /* release of a VEB-owner or last VSI is not allowed */
7896 if (vsi->flags & I40E_VSI_FLAG_VEB_OWNER) {
7897 dev_info(&pf->pdev->dev, "VSI %d has existing VEB %d\n",
7898 vsi->seid, vsi->uplink_seid);
7901 if (vsi == pf->vsi[pf->lan_vsi] &&
7902 !test_bit(__I40E_DOWN, &pf->state)) {
7903 dev_info(&pf->pdev->dev, "Can't remove PF VSI\n");
7907 uplink_seid = vsi->uplink_seid;
7908 if (vsi->type != I40E_VSI_SRIOV) {
7909 if (vsi->netdev_registered) {
7910 vsi->netdev_registered = false;
7912 /* results in a call to i40e_close() */
7913 unregister_netdev(vsi->netdev);
7916 i40e_vsi_close(vsi);
7918 i40e_vsi_disable_irq(vsi);
7921 list_for_each_entry_safe(f, ftmp, &vsi->mac_filter_list, list)
7922 i40e_del_filter(vsi, f->macaddr, f->vlan,
7923 f->is_vf, f->is_netdev);
7924 i40e_sync_vsi_filters(vsi);
7926 i40e_vsi_delete(vsi);
7927 i40e_vsi_free_q_vectors(vsi);
7929 free_netdev(vsi->netdev);
7932 i40e_vsi_clear_rings(vsi);
7933 i40e_vsi_clear(vsi);
7935 /* If this was the last thing on the VEB, except for the
7936 * controlling VSI, remove the VEB, which puts the controlling
7937 * VSI onto the next level down in the switch.
7939 * Well, okay, there's one more exception here: don't remove
7940 * the orphan VEBs yet. We'll wait for an explicit remove request
7941 * from up the network stack.
7943 for (n = 0, i = 0; i < pf->num_alloc_vsi; i++) {
7945 pf->vsi[i]->uplink_seid == uplink_seid &&
7946 (pf->vsi[i]->flags & I40E_VSI_FLAG_VEB_OWNER) == 0) {
7947 n++; /* count the VSIs */
7950 for (i = 0; i < I40E_MAX_VEB; i++) {
7953 if (pf->veb[i]->uplink_seid == uplink_seid)
7954 n++; /* count the VEBs */
7955 if (pf->veb[i]->seid == uplink_seid)
7958 if (n == 0 && veb && veb->uplink_seid != 0)
7959 i40e_veb_release(veb);
7965 * i40e_vsi_setup_vectors - Set up the q_vectors for the given VSI
7966 * @vsi: ptr to the VSI
7968 * This should only be called after i40e_vsi_mem_alloc() which allocates the
7969 * corresponding SW VSI structure and initializes num_queue_pairs for the
7970 * newly allocated VSI.
7972 * Returns 0 on success or negative on failure
7974 static int i40e_vsi_setup_vectors(struct i40e_vsi *vsi)
7977 struct i40e_pf *pf = vsi->back;
7979 if (vsi->q_vectors[0]) {
7980 dev_info(&pf->pdev->dev, "VSI %d has existing q_vectors\n",
7985 if (vsi->base_vector) {
7986 dev_info(&pf->pdev->dev, "VSI %d has non-zero base vector %d\n",
7987 vsi->seid, vsi->base_vector);
7991 ret = i40e_vsi_alloc_q_vectors(vsi);
7993 dev_info(&pf->pdev->dev,
7994 "failed to allocate %d q_vector for VSI %d, ret=%d\n",
7995 vsi->num_q_vectors, vsi->seid, ret);
7996 vsi->num_q_vectors = 0;
7997 goto vector_setup_out;
8000 if (vsi->num_q_vectors)
8001 vsi->base_vector = i40e_get_lump(pf, pf->irq_pile,
8002 vsi->num_q_vectors, vsi->idx);
8003 if (vsi->base_vector < 0) {
8004 dev_info(&pf->pdev->dev,
8005 "failed to get tracking for %d vectors for VSI %d, err=%d\n",
8006 vsi->num_q_vectors, vsi->seid, vsi->base_vector);
8007 i40e_vsi_free_q_vectors(vsi);
8009 goto vector_setup_out;
8017 * i40e_vsi_reinit_setup - return and reallocate resources for a VSI
8018 * @vsi: pointer to the vsi.
8020 * This re-allocates a vsi's queue resources.
8022 * Returns pointer to the successfully allocated and configured VSI sw struct
8023 * on success, otherwise returns NULL on failure.
8025 static struct i40e_vsi *i40e_vsi_reinit_setup(struct i40e_vsi *vsi)
8027 struct i40e_pf *pf = vsi->back;
8031 i40e_put_lump(pf->qp_pile, vsi->base_queue, vsi->idx);
8032 i40e_vsi_clear_rings(vsi);
8034 i40e_vsi_free_arrays(vsi, false);
8035 i40e_set_num_rings_in_vsi(vsi);
8036 ret = i40e_vsi_alloc_arrays(vsi, false);
8040 ret = i40e_get_lump(pf, pf->qp_pile, vsi->alloc_queue_pairs, vsi->idx);
8042 dev_info(&pf->pdev->dev,
8043 "failed to get tracking for %d queues for VSI %d err=%d\n",
8044 vsi->alloc_queue_pairs, vsi->seid, ret);
8047 vsi->base_queue = ret;
8049 /* Update the FW view of the VSI. Force a reset of TC and queue
8050 * layout configurations.
8052 enabled_tc = pf->vsi[pf->lan_vsi]->tc_config.enabled_tc;
8053 pf->vsi[pf->lan_vsi]->tc_config.enabled_tc = 0;
8054 pf->vsi[pf->lan_vsi]->seid = pf->main_vsi_seid;
8055 i40e_vsi_config_tc(pf->vsi[pf->lan_vsi], enabled_tc);
8057 /* assign it some queues */
8058 ret = i40e_alloc_rings(vsi);
8062 /* map all of the rings to the q_vectors */
8063 i40e_vsi_map_rings_to_vectors(vsi);
8067 i40e_vsi_free_q_vectors(vsi);
8068 if (vsi->netdev_registered) {
8069 vsi->netdev_registered = false;
8070 unregister_netdev(vsi->netdev);
8071 free_netdev(vsi->netdev);
8074 i40e_aq_delete_element(&pf->hw, vsi->seid, NULL);
8076 i40e_vsi_clear(vsi);
8081 * i40e_vsi_setup - Set up a VSI by a given type
8082 * @pf: board private structure
8084 * @uplink_seid: the switch element to link to
8085 * @param1: usage depends upon VSI type. For VF types, indicates VF id
8087 * This allocates the sw VSI structure and its queue resources, then add a VSI
8088 * to the identified VEB.
8090 * Returns pointer to the successfully allocated and configure VSI sw struct on
8091 * success, otherwise returns NULL on failure.
8093 struct i40e_vsi *i40e_vsi_setup(struct i40e_pf *pf, u8 type,
8094 u16 uplink_seid, u32 param1)
8096 struct i40e_vsi *vsi = NULL;
8097 struct i40e_veb *veb = NULL;
8101 /* The requested uplink_seid must be either
8102 * - the PF's port seid
8103 * no VEB is needed because this is the PF
8104 * or this is a Flow Director special case VSI
8105 * - seid of an existing VEB
8106 * - seid of a VSI that owns an existing VEB
8107 * - seid of a VSI that doesn't own a VEB
8108 * a new VEB is created and the VSI becomes the owner
8109 * - seid of the PF VSI, which is what creates the first VEB
8110 * this is a special case of the previous
8112 * Find which uplink_seid we were given and create a new VEB if needed
8114 for (i = 0; i < I40E_MAX_VEB; i++) {
8115 if (pf->veb[i] && pf->veb[i]->seid == uplink_seid) {
8121 if (!veb && uplink_seid != pf->mac_seid) {
8123 for (i = 0; i < pf->num_alloc_vsi; i++) {
8124 if (pf->vsi[i] && pf->vsi[i]->seid == uplink_seid) {
8130 dev_info(&pf->pdev->dev, "no such uplink_seid %d\n",
8135 if (vsi->uplink_seid == pf->mac_seid)
8136 veb = i40e_veb_setup(pf, 0, pf->mac_seid, vsi->seid,
8137 vsi->tc_config.enabled_tc);
8138 else if ((vsi->flags & I40E_VSI_FLAG_VEB_OWNER) == 0)
8139 veb = i40e_veb_setup(pf, 0, vsi->uplink_seid, vsi->seid,
8140 vsi->tc_config.enabled_tc);
8142 for (i = 0; i < I40E_MAX_VEB && !veb; i++) {
8143 if (pf->veb[i] && pf->veb[i]->seid == vsi->uplink_seid)
8147 dev_info(&pf->pdev->dev, "couldn't add VEB\n");
8151 vsi->flags |= I40E_VSI_FLAG_VEB_OWNER;
8152 uplink_seid = veb->seid;
8155 /* get vsi sw struct */
8156 v_idx = i40e_vsi_mem_alloc(pf, type);
8159 vsi = pf->vsi[v_idx];
8163 vsi->veb_idx = (veb ? veb->idx : I40E_NO_VEB);
8165 if (type == I40E_VSI_MAIN)
8166 pf->lan_vsi = v_idx;
8167 else if (type == I40E_VSI_SRIOV)
8168 vsi->vf_id = param1;
8169 /* assign it some queues */
8170 ret = i40e_get_lump(pf, pf->qp_pile, vsi->alloc_queue_pairs,
8173 dev_info(&pf->pdev->dev,
8174 "failed to get tracking for %d queues for VSI %d err=%d\n",
8175 vsi->alloc_queue_pairs, vsi->seid, ret);
8178 vsi->base_queue = ret;
8180 /* get a VSI from the hardware */
8181 vsi->uplink_seid = uplink_seid;
8182 ret = i40e_add_vsi(vsi);
8186 switch (vsi->type) {
8187 /* setup the netdev if needed */
8189 case I40E_VSI_VMDQ2:
8191 ret = i40e_config_netdev(vsi);
8194 ret = register_netdev(vsi->netdev);
8197 vsi->netdev_registered = true;
8198 netif_carrier_off(vsi->netdev);
8199 #ifdef CONFIG_I40E_DCB
8200 /* Setup DCB netlink interface */
8201 i40e_dcbnl_setup(vsi);
8202 #endif /* CONFIG_I40E_DCB */
8206 /* set up vectors and rings if needed */
8207 ret = i40e_vsi_setup_vectors(vsi);
8211 ret = i40e_alloc_rings(vsi);
8215 /* map all of the rings to the q_vectors */
8216 i40e_vsi_map_rings_to_vectors(vsi);
8218 i40e_vsi_reset_stats(vsi);
8222 /* no netdev or rings for the other VSI types */
8229 i40e_vsi_free_q_vectors(vsi);
8231 if (vsi->netdev_registered) {
8232 vsi->netdev_registered = false;
8233 unregister_netdev(vsi->netdev);
8234 free_netdev(vsi->netdev);
8238 i40e_aq_delete_element(&pf->hw, vsi->seid, NULL);
8240 i40e_vsi_clear(vsi);
8246 * i40e_veb_get_bw_info - Query VEB BW information
8247 * @veb: the veb to query
8249 * Query the Tx scheduler BW configuration data for given VEB
8251 static int i40e_veb_get_bw_info(struct i40e_veb *veb)
8253 struct i40e_aqc_query_switching_comp_ets_config_resp ets_data;
8254 struct i40e_aqc_query_switching_comp_bw_config_resp bw_data;
8255 struct i40e_pf *pf = veb->pf;
8256 struct i40e_hw *hw = &pf->hw;
8261 ret = i40e_aq_query_switch_comp_bw_config(hw, veb->seid,
8264 dev_info(&pf->pdev->dev,
8265 "query veb bw config failed, aq_err=%d\n",
8266 hw->aq.asq_last_status);
8270 ret = i40e_aq_query_switch_comp_ets_config(hw, veb->seid,
8273 dev_info(&pf->pdev->dev,
8274 "query veb bw ets config failed, aq_err=%d\n",
8275 hw->aq.asq_last_status);
8279 veb->bw_limit = le16_to_cpu(ets_data.port_bw_limit);
8280 veb->bw_max_quanta = ets_data.tc_bw_max;
8281 veb->is_abs_credits = bw_data.absolute_credits_enable;
8282 veb->enabled_tc = ets_data.tc_valid_bits;
8283 tc_bw_max = le16_to_cpu(bw_data.tc_bw_max[0]) |
8284 (le16_to_cpu(bw_data.tc_bw_max[1]) << 16);
8285 for (i = 0; i < I40E_MAX_TRAFFIC_CLASS; i++) {
8286 veb->bw_tc_share_credits[i] = bw_data.tc_bw_share_credits[i];
8287 veb->bw_tc_limit_credits[i] =
8288 le16_to_cpu(bw_data.tc_bw_limits[i]);
8289 veb->bw_tc_max_quanta[i] = ((tc_bw_max >> (i*4)) & 0x7);
8297 * i40e_veb_mem_alloc - Allocates the next available struct veb in the PF
8298 * @pf: board private structure
8300 * On error: returns error code (negative)
8301 * On success: returns vsi index in PF (positive)
8303 static int i40e_veb_mem_alloc(struct i40e_pf *pf)
8306 struct i40e_veb *veb;
8309 /* Need to protect the allocation of switch elements at the PF level */
8310 mutex_lock(&pf->switch_mutex);
8312 /* VEB list may be fragmented if VEB creation/destruction has
8313 * been happening. We can afford to do a quick scan to look
8314 * for any free slots in the list.
8316 * find next empty veb slot, looping back around if necessary
8319 while ((i < I40E_MAX_VEB) && (pf->veb[i] != NULL))
8321 if (i >= I40E_MAX_VEB) {
8323 goto err_alloc_veb; /* out of VEB slots! */
8326 veb = kzalloc(sizeof(*veb), GFP_KERNEL);
8333 veb->enabled_tc = 1;
8338 mutex_unlock(&pf->switch_mutex);
8343 * i40e_switch_branch_release - Delete a branch of the switch tree
8344 * @branch: where to start deleting
8346 * This uses recursion to find the tips of the branch to be
8347 * removed, deleting until we get back to and can delete this VEB.
8349 static void i40e_switch_branch_release(struct i40e_veb *branch)
8351 struct i40e_pf *pf = branch->pf;
8352 u16 branch_seid = branch->seid;
8353 u16 veb_idx = branch->idx;
8356 /* release any VEBs on this VEB - RECURSION */
8357 for (i = 0; i < I40E_MAX_VEB; i++) {
8360 if (pf->veb[i]->uplink_seid == branch->seid)
8361 i40e_switch_branch_release(pf->veb[i]);
8364 /* Release the VSIs on this VEB, but not the owner VSI.
8366 * NOTE: Removing the last VSI on a VEB has the SIDE EFFECT of removing
8367 * the VEB itself, so don't use (*branch) after this loop.
8369 for (i = 0; i < pf->num_alloc_vsi; i++) {
8372 if (pf->vsi[i]->uplink_seid == branch_seid &&
8373 (pf->vsi[i]->flags & I40E_VSI_FLAG_VEB_OWNER) == 0) {
8374 i40e_vsi_release(pf->vsi[i]);
8378 /* There's one corner case where the VEB might not have been
8379 * removed, so double check it here and remove it if needed.
8380 * This case happens if the veb was created from the debugfs
8381 * commands and no VSIs were added to it.
8383 if (pf->veb[veb_idx])
8384 i40e_veb_release(pf->veb[veb_idx]);
8388 * i40e_veb_clear - remove veb struct
8389 * @veb: the veb to remove
8391 static void i40e_veb_clear(struct i40e_veb *veb)
8397 struct i40e_pf *pf = veb->pf;
8399 mutex_lock(&pf->switch_mutex);
8400 if (pf->veb[veb->idx] == veb)
8401 pf->veb[veb->idx] = NULL;
8402 mutex_unlock(&pf->switch_mutex);
8409 * i40e_veb_release - Delete a VEB and free its resources
8410 * @veb: the VEB being removed
8412 void i40e_veb_release(struct i40e_veb *veb)
8414 struct i40e_vsi *vsi = NULL;
8420 /* find the remaining VSI and check for extras */
8421 for (i = 0; i < pf->num_alloc_vsi; i++) {
8422 if (pf->vsi[i] && pf->vsi[i]->uplink_seid == veb->seid) {
8428 dev_info(&pf->pdev->dev,
8429 "can't remove VEB %d with %d VSIs left\n",
8434 /* move the remaining VSI to uplink veb */
8435 vsi->flags &= ~I40E_VSI_FLAG_VEB_OWNER;
8436 if (veb->uplink_seid) {
8437 vsi->uplink_seid = veb->uplink_seid;
8438 if (veb->uplink_seid == pf->mac_seid)
8439 vsi->veb_idx = I40E_NO_VEB;
8441 vsi->veb_idx = veb->veb_idx;
8444 vsi->uplink_seid = pf->vsi[pf->lan_vsi]->uplink_seid;
8445 vsi->veb_idx = pf->vsi[pf->lan_vsi]->veb_idx;
8448 i40e_aq_delete_element(&pf->hw, veb->seid, NULL);
8449 i40e_veb_clear(veb);
8453 * i40e_add_veb - create the VEB in the switch
8454 * @veb: the VEB to be instantiated
8455 * @vsi: the controlling VSI
8457 static int i40e_add_veb(struct i40e_veb *veb, struct i40e_vsi *vsi)
8459 bool is_default = false;
8460 bool is_cloud = false;
8463 /* get a VEB from the hardware */
8464 ret = i40e_aq_add_veb(&veb->pf->hw, veb->uplink_seid, vsi->seid,
8465 veb->enabled_tc, is_default,
8466 is_cloud, &veb->seid, NULL);
8468 dev_info(&veb->pf->pdev->dev,
8469 "couldn't add VEB, err %d, aq_err %d\n",
8470 ret, veb->pf->hw.aq.asq_last_status);
8474 /* get statistics counter */
8475 ret = i40e_aq_get_veb_parameters(&veb->pf->hw, veb->seid, NULL, NULL,
8476 &veb->stats_idx, NULL, NULL, NULL);
8478 dev_info(&veb->pf->pdev->dev,
8479 "couldn't get VEB statistics idx, err %d, aq_err %d\n",
8480 ret, veb->pf->hw.aq.asq_last_status);
8483 ret = i40e_veb_get_bw_info(veb);
8485 dev_info(&veb->pf->pdev->dev,
8486 "couldn't get VEB bw info, err %d, aq_err %d\n",
8487 ret, veb->pf->hw.aq.asq_last_status);
8488 i40e_aq_delete_element(&veb->pf->hw, veb->seid, NULL);
8492 vsi->uplink_seid = veb->seid;
8493 vsi->veb_idx = veb->idx;
8494 vsi->flags |= I40E_VSI_FLAG_VEB_OWNER;
8500 * i40e_veb_setup - Set up a VEB
8501 * @pf: board private structure
8502 * @flags: VEB setup flags
8503 * @uplink_seid: the switch element to link to
8504 * @vsi_seid: the initial VSI seid
8505 * @enabled_tc: Enabled TC bit-map
8507 * This allocates the sw VEB structure and links it into the switch
8508 * It is possible and legal for this to be a duplicate of an already
8509 * existing VEB. It is also possible for both uplink and vsi seids
8510 * to be zero, in order to create a floating VEB.
8512 * Returns pointer to the successfully allocated VEB sw struct on
8513 * success, otherwise returns NULL on failure.
8515 struct i40e_veb *i40e_veb_setup(struct i40e_pf *pf, u16 flags,
8516 u16 uplink_seid, u16 vsi_seid,
8519 struct i40e_veb *veb, *uplink_veb = NULL;
8520 int vsi_idx, veb_idx;
8523 /* if one seid is 0, the other must be 0 to create a floating relay */
8524 if ((uplink_seid == 0 || vsi_seid == 0) &&
8525 (uplink_seid + vsi_seid != 0)) {
8526 dev_info(&pf->pdev->dev,
8527 "one, not both seid's are 0: uplink=%d vsi=%d\n",
8528 uplink_seid, vsi_seid);
8532 /* make sure there is such a vsi and uplink */
8533 for (vsi_idx = 0; vsi_idx < pf->num_alloc_vsi; vsi_idx++)
8534 if (pf->vsi[vsi_idx] && pf->vsi[vsi_idx]->seid == vsi_seid)
8536 if (vsi_idx >= pf->num_alloc_vsi && vsi_seid != 0) {
8537 dev_info(&pf->pdev->dev, "vsi seid %d not found\n",
8542 if (uplink_seid && uplink_seid != pf->mac_seid) {
8543 for (veb_idx = 0; veb_idx < I40E_MAX_VEB; veb_idx++) {
8544 if (pf->veb[veb_idx] &&
8545 pf->veb[veb_idx]->seid == uplink_seid) {
8546 uplink_veb = pf->veb[veb_idx];
8551 dev_info(&pf->pdev->dev,
8552 "uplink seid %d not found\n", uplink_seid);
8557 /* get veb sw struct */
8558 veb_idx = i40e_veb_mem_alloc(pf);
8561 veb = pf->veb[veb_idx];
8563 veb->uplink_seid = uplink_seid;
8564 veb->veb_idx = (uplink_veb ? uplink_veb->idx : I40E_NO_VEB);
8565 veb->enabled_tc = (enabled_tc ? enabled_tc : 0x1);
8567 /* create the VEB in the switch */
8568 ret = i40e_add_veb(veb, pf->vsi[vsi_idx]);
8571 if (vsi_idx == pf->lan_vsi)
8572 pf->lan_veb = veb->idx;
8577 i40e_veb_clear(veb);
8583 * i40e_setup_pf_switch_element - set pf vars based on switch type
8584 * @pf: board private structure
8585 * @ele: element we are building info from
8586 * @num_reported: total number of elements
8587 * @printconfig: should we print the contents
8589 * helper function to assist in extracting a few useful SEID values.
8591 static void i40e_setup_pf_switch_element(struct i40e_pf *pf,
8592 struct i40e_aqc_switch_config_element_resp *ele,
8593 u16 num_reported, bool printconfig)
8595 u16 downlink_seid = le16_to_cpu(ele->downlink_seid);
8596 u16 uplink_seid = le16_to_cpu(ele->uplink_seid);
8597 u8 element_type = ele->element_type;
8598 u16 seid = le16_to_cpu(ele->seid);
8601 dev_info(&pf->pdev->dev,
8602 "type=%d seid=%d uplink=%d downlink=%d\n",
8603 element_type, seid, uplink_seid, downlink_seid);
8605 switch (element_type) {
8606 case I40E_SWITCH_ELEMENT_TYPE_MAC:
8607 pf->mac_seid = seid;
8609 case I40E_SWITCH_ELEMENT_TYPE_VEB:
8611 if (uplink_seid != pf->mac_seid)
8613 if (pf->lan_veb == I40E_NO_VEB) {
8616 /* find existing or else empty VEB */
8617 for (v = 0; v < I40E_MAX_VEB; v++) {
8618 if (pf->veb[v] && (pf->veb[v]->seid == seid)) {
8623 if (pf->lan_veb == I40E_NO_VEB) {
8624 v = i40e_veb_mem_alloc(pf);
8631 pf->veb[pf->lan_veb]->seid = seid;
8632 pf->veb[pf->lan_veb]->uplink_seid = pf->mac_seid;
8633 pf->veb[pf->lan_veb]->pf = pf;
8634 pf->veb[pf->lan_veb]->veb_idx = I40E_NO_VEB;
8636 case I40E_SWITCH_ELEMENT_TYPE_VSI:
8637 if (num_reported != 1)
8639 /* This is immediately after a reset so we can assume this is
8642 pf->mac_seid = uplink_seid;
8643 pf->pf_seid = downlink_seid;
8644 pf->main_vsi_seid = seid;
8646 dev_info(&pf->pdev->dev,
8647 "pf_seid=%d main_vsi_seid=%d\n",
8648 pf->pf_seid, pf->main_vsi_seid);
8650 case I40E_SWITCH_ELEMENT_TYPE_PF:
8651 case I40E_SWITCH_ELEMENT_TYPE_VF:
8652 case I40E_SWITCH_ELEMENT_TYPE_EMP:
8653 case I40E_SWITCH_ELEMENT_TYPE_BMC:
8654 case I40E_SWITCH_ELEMENT_TYPE_PE:
8655 case I40E_SWITCH_ELEMENT_TYPE_PA:
8656 /* ignore these for now */
8659 dev_info(&pf->pdev->dev, "unknown element type=%d seid=%d\n",
8660 element_type, seid);
8666 * i40e_fetch_switch_configuration - Get switch config from firmware
8667 * @pf: board private structure
8668 * @printconfig: should we print the contents
8670 * Get the current switch configuration from the device and
8671 * extract a few useful SEID values.
8673 int i40e_fetch_switch_configuration(struct i40e_pf *pf, bool printconfig)
8675 struct i40e_aqc_get_switch_config_resp *sw_config;
8681 aq_buf = kzalloc(I40E_AQ_LARGE_BUF, GFP_KERNEL);
8685 sw_config = (struct i40e_aqc_get_switch_config_resp *)aq_buf;
8687 u16 num_reported, num_total;
8689 ret = i40e_aq_get_switch_config(&pf->hw, sw_config,
8693 dev_info(&pf->pdev->dev,
8694 "get switch config failed %d aq_err=%x\n",
8695 ret, pf->hw.aq.asq_last_status);
8700 num_reported = le16_to_cpu(sw_config->header.num_reported);
8701 num_total = le16_to_cpu(sw_config->header.num_total);
8704 dev_info(&pf->pdev->dev,
8705 "header: %d reported %d total\n",
8706 num_reported, num_total);
8708 for (i = 0; i < num_reported; i++) {
8709 struct i40e_aqc_switch_config_element_resp *ele =
8710 &sw_config->element[i];
8712 i40e_setup_pf_switch_element(pf, ele, num_reported,
8715 } while (next_seid != 0);
8722 * i40e_setup_pf_switch - Setup the HW switch on startup or after reset
8723 * @pf: board private structure
8724 * @reinit: if the Main VSI needs to re-initialized.
8726 * Returns 0 on success, negative value on failure
8728 static int i40e_setup_pf_switch(struct i40e_pf *pf, bool reinit)
8732 /* find out what's out there already */
8733 ret = i40e_fetch_switch_configuration(pf, false);
8735 dev_info(&pf->pdev->dev,
8736 "couldn't fetch switch config, err %d, aq_err %d\n",
8737 ret, pf->hw.aq.asq_last_status);
8740 i40e_pf_reset_stats(pf);
8742 /* first time setup */
8743 if (pf->lan_vsi == I40E_NO_VSI || reinit) {
8744 struct i40e_vsi *vsi = NULL;
8747 /* Set up the PF VSI associated with the PF's main VSI
8748 * that is already in the HW switch
8750 if (pf->lan_veb != I40E_NO_VEB && pf->veb[pf->lan_veb])
8751 uplink_seid = pf->veb[pf->lan_veb]->seid;
8753 uplink_seid = pf->mac_seid;
8754 if (pf->lan_vsi == I40E_NO_VSI)
8755 vsi = i40e_vsi_setup(pf, I40E_VSI_MAIN, uplink_seid, 0);
8757 vsi = i40e_vsi_reinit_setup(pf->vsi[pf->lan_vsi]);
8759 dev_info(&pf->pdev->dev, "setup of MAIN VSI failed\n");
8760 i40e_fdir_teardown(pf);
8764 /* force a reset of TC and queue layout configurations */
8765 u8 enabled_tc = pf->vsi[pf->lan_vsi]->tc_config.enabled_tc;
8766 pf->vsi[pf->lan_vsi]->tc_config.enabled_tc = 0;
8767 pf->vsi[pf->lan_vsi]->seid = pf->main_vsi_seid;
8768 i40e_vsi_config_tc(pf->vsi[pf->lan_vsi], enabled_tc);
8770 i40e_vlan_stripping_disable(pf->vsi[pf->lan_vsi]);
8772 i40e_fdir_sb_setup(pf);
8774 /* Setup static PF queue filter control settings */
8775 ret = i40e_setup_pf_filter_control(pf);
8777 dev_info(&pf->pdev->dev, "setup_pf_filter_control failed: %d\n",
8779 /* Failure here should not stop continuing other steps */
8782 /* enable RSS in the HW, even for only one queue, as the stack can use
8785 if ((pf->flags & I40E_FLAG_RSS_ENABLED))
8786 i40e_config_rss(pf);
8788 /* fill in link information and enable LSE reporting */
8789 i40e_update_link_info(&pf->hw, true);
8790 i40e_link_event(pf);
8792 /* Initialize user-specific link properties */
8793 pf->fc_autoneg_status = ((pf->hw.phy.link_info.an_info &
8794 I40E_AQ_AN_COMPLETED) ? true : false);
8796 /* fill in link information and enable LSE reporting */
8797 i40e_update_link_info(&pf->hw, true);
8798 i40e_link_event(pf);
8800 /* Initialize user-specific link properties */
8801 pf->fc_autoneg_status = ((pf->hw.phy.link_info.an_info &
8802 I40E_AQ_AN_COMPLETED) ? true : false);
8810 * i40e_determine_queue_usage - Work out queue distribution
8811 * @pf: board private structure
8813 static void i40e_determine_queue_usage(struct i40e_pf *pf)
8817 pf->num_lan_qps = 0;
8819 pf->num_fcoe_qps = 0;
8822 /* Find the max queues to be put into basic use. We'll always be
8823 * using TC0, whether or not DCB is running, and TC0 will get the
8826 queues_left = pf->hw.func_caps.num_tx_qp;
8828 if ((queues_left == 1) ||
8829 !(pf->flags & I40E_FLAG_MSIX_ENABLED)) {
8830 /* one qp for PF, no queues for anything else */
8832 pf->rss_size = pf->num_lan_qps = 1;
8834 /* make sure all the fancies are disabled */
8835 pf->flags &= ~(I40E_FLAG_RSS_ENABLED |
8837 I40E_FLAG_FCOE_ENABLED |
8839 I40E_FLAG_FD_SB_ENABLED |
8840 I40E_FLAG_FD_ATR_ENABLED |
8841 I40E_FLAG_DCB_CAPABLE |
8842 I40E_FLAG_SRIOV_ENABLED |
8843 I40E_FLAG_VMDQ_ENABLED);
8844 } else if (!(pf->flags & (I40E_FLAG_RSS_ENABLED |
8845 I40E_FLAG_FD_SB_ENABLED |
8846 I40E_FLAG_FD_ATR_ENABLED |
8847 I40E_FLAG_DCB_CAPABLE))) {
8849 pf->rss_size = pf->num_lan_qps = 1;
8850 queues_left -= pf->num_lan_qps;
8852 pf->flags &= ~(I40E_FLAG_RSS_ENABLED |
8854 I40E_FLAG_FCOE_ENABLED |
8856 I40E_FLAG_FD_SB_ENABLED |
8857 I40E_FLAG_FD_ATR_ENABLED |
8858 I40E_FLAG_DCB_ENABLED |
8859 I40E_FLAG_VMDQ_ENABLED);
8861 /* Not enough queues for all TCs */
8862 if ((pf->flags & I40E_FLAG_DCB_CAPABLE) &&
8863 (queues_left < I40E_MAX_TRAFFIC_CLASS)) {
8864 pf->flags &= ~I40E_FLAG_DCB_CAPABLE;
8865 dev_info(&pf->pdev->dev, "not enough queues for DCB. DCB is disabled.\n");
8867 pf->num_lan_qps = pf->rss_size_max;
8868 queues_left -= pf->num_lan_qps;
8872 if (pf->flags & I40E_FLAG_FCOE_ENABLED) {
8873 if (I40E_DEFAULT_FCOE <= queues_left) {
8874 pf->num_fcoe_qps = I40E_DEFAULT_FCOE;
8875 } else if (I40E_MINIMUM_FCOE <= queues_left) {
8876 pf->num_fcoe_qps = I40E_MINIMUM_FCOE;
8878 pf->num_fcoe_qps = 0;
8879 pf->flags &= ~I40E_FLAG_FCOE_ENABLED;
8880 dev_info(&pf->pdev->dev, "not enough queues for FCoE. FCoE feature will be disabled\n");
8883 queues_left -= pf->num_fcoe_qps;
8887 if (pf->flags & I40E_FLAG_FD_SB_ENABLED) {
8888 if (queues_left > 1) {
8889 queues_left -= 1; /* save 1 queue for FD */
8891 pf->flags &= ~I40E_FLAG_FD_SB_ENABLED;
8892 dev_info(&pf->pdev->dev, "not enough queues for Flow Director. Flow Director feature is disabled\n");
8896 if ((pf->flags & I40E_FLAG_SRIOV_ENABLED) &&
8897 pf->num_vf_qps && pf->num_req_vfs && queues_left) {
8898 pf->num_req_vfs = min_t(int, pf->num_req_vfs,
8899 (queues_left / pf->num_vf_qps));
8900 queues_left -= (pf->num_req_vfs * pf->num_vf_qps);
8903 if ((pf->flags & I40E_FLAG_VMDQ_ENABLED) &&
8904 pf->num_vmdq_vsis && pf->num_vmdq_qps && queues_left) {
8905 pf->num_vmdq_vsis = min_t(int, pf->num_vmdq_vsis,
8906 (queues_left / pf->num_vmdq_qps));
8907 queues_left -= (pf->num_vmdq_vsis * pf->num_vmdq_qps);
8910 pf->queues_left = queues_left;
8912 dev_info(&pf->pdev->dev, "fcoe queues = %d\n", pf->num_fcoe_qps);
8917 * i40e_setup_pf_filter_control - Setup PF static filter control
8918 * @pf: PF to be setup
8920 * i40e_setup_pf_filter_control sets up a pf's initial filter control
8921 * settings. If PE/FCoE are enabled then it will also set the per PF
8922 * based filter sizes required for them. It also enables Flow director,
8923 * ethertype and macvlan type filter settings for the pf.
8925 * Returns 0 on success, negative on failure
8927 static int i40e_setup_pf_filter_control(struct i40e_pf *pf)
8929 struct i40e_filter_control_settings *settings = &pf->filter_settings;
8931 settings->hash_lut_size = I40E_HASH_LUT_SIZE_128;
8933 /* Flow Director is enabled */
8934 if (pf->flags & (I40E_FLAG_FD_SB_ENABLED | I40E_FLAG_FD_ATR_ENABLED))
8935 settings->enable_fdir = true;
8937 /* Ethtype and MACVLAN filters enabled for PF */
8938 settings->enable_ethtype = true;
8939 settings->enable_macvlan = true;
8941 if (i40e_set_filter_control(&pf->hw, settings))
8947 #define INFO_STRING_LEN 255
8948 static void i40e_print_features(struct i40e_pf *pf)
8950 struct i40e_hw *hw = &pf->hw;
8953 string = kzalloc(INFO_STRING_LEN, GFP_KERNEL);
8955 dev_err(&pf->pdev->dev, "Features string allocation failed\n");
8961 buf += sprintf(string, "Features: PF-id[%d] ", hw->pf_id);
8962 #ifdef CONFIG_PCI_IOV
8963 buf += sprintf(buf, "VFs: %d ", pf->num_req_vfs);
8965 buf += sprintf(buf, "VSIs: %d QP: %d ", pf->hw.func_caps.num_vsis,
8966 pf->vsi[pf->lan_vsi]->num_queue_pairs);
8968 if (pf->flags & I40E_FLAG_RSS_ENABLED)
8969 buf += sprintf(buf, "RSS ");
8970 if (pf->flags & I40E_FLAG_FD_ATR_ENABLED)
8971 buf += sprintf(buf, "FD_ATR ");
8972 if (pf->flags & I40E_FLAG_FD_SB_ENABLED) {
8973 buf += sprintf(buf, "FD_SB ");
8974 buf += sprintf(buf, "NTUPLE ");
8976 if (pf->flags & I40E_FLAG_DCB_CAPABLE)
8977 buf += sprintf(buf, "DCB ");
8978 if (pf->flags & I40E_FLAG_PTP)
8979 buf += sprintf(buf, "PTP ");
8981 if (pf->flags & I40E_FLAG_FCOE_ENABLED)
8982 buf += sprintf(buf, "FCOE ");
8985 BUG_ON(buf > (string + INFO_STRING_LEN));
8986 dev_info(&pf->pdev->dev, "%s\n", string);
8991 * i40e_probe - Device initialization routine
8992 * @pdev: PCI device information struct
8993 * @ent: entry in i40e_pci_tbl
8995 * i40e_probe initializes a pf identified by a pci_dev structure.
8996 * The OS initialization, configuring of the pf private structure,
8997 * and a hardware reset occur.
8999 * Returns 0 on success, negative on failure
9001 static int i40e_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
9005 static u16 pfs_found;
9011 err = pci_enable_device_mem(pdev);
9015 /* set up for high or low dma */
9016 err = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64));
9018 err = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
9021 "DMA configuration failed: 0x%x\n", err);
9026 /* set up pci connections */
9027 err = pci_request_selected_regions(pdev, pci_select_bars(pdev,
9028 IORESOURCE_MEM), i40e_driver_name);
9030 dev_info(&pdev->dev,
9031 "pci_request_selected_regions failed %d\n", err);
9035 pci_enable_pcie_error_reporting(pdev);
9036 pci_set_master(pdev);
9038 /* Now that we have a PCI connection, we need to do the
9039 * low level device setup. This is primarily setting up
9040 * the Admin Queue structures and then querying for the
9041 * device's current profile information.
9043 pf = kzalloc(sizeof(*pf), GFP_KERNEL);
9050 set_bit(__I40E_DOWN, &pf->state);
9054 hw->hw_addr = ioremap(pci_resource_start(pdev, 0),
9055 pci_resource_len(pdev, 0));
9058 dev_info(&pdev->dev, "ioremap(0x%04x, 0x%04x) failed: 0x%x\n",
9059 (unsigned int)pci_resource_start(pdev, 0),
9060 (unsigned int)pci_resource_len(pdev, 0), err);
9063 hw->vendor_id = pdev->vendor;
9064 hw->device_id = pdev->device;
9065 pci_read_config_byte(pdev, PCI_REVISION_ID, &hw->revision_id);
9066 hw->subsystem_vendor_id = pdev->subsystem_vendor;
9067 hw->subsystem_device_id = pdev->subsystem_device;
9068 hw->bus.device = PCI_SLOT(pdev->devfn);
9069 hw->bus.func = PCI_FUNC(pdev->devfn);
9070 pf->instance = pfs_found;
9073 pf->msg_enable = pf->hw.debug_mask;
9074 pf->msg_enable = debug;
9077 /* do a special CORER for clearing PXE mode once at init */
9078 if (hw->revision_id == 0 &&
9079 (rd32(hw, I40E_GLLAN_RCTL_0) & I40E_GLLAN_RCTL_0_PXE_MODE_MASK)) {
9080 wr32(hw, I40E_GLGEN_RTRIG, I40E_GLGEN_RTRIG_CORER_MASK);
9085 i40e_clear_pxe_mode(hw);
9088 /* Reset here to make sure all is clean and to define PF 'n' */
9090 err = i40e_pf_reset(hw);
9092 dev_info(&pdev->dev, "Initial pf_reset failed: %d\n", err);
9097 hw->aq.num_arq_entries = I40E_AQ_LEN;
9098 hw->aq.num_asq_entries = I40E_AQ_LEN;
9099 hw->aq.arq_buf_size = I40E_MAX_AQ_BUF_SIZE;
9100 hw->aq.asq_buf_size = I40E_MAX_AQ_BUF_SIZE;
9101 pf->adminq_work_limit = I40E_AQ_WORK_LIMIT;
9102 snprintf(pf->misc_int_name, sizeof(pf->misc_int_name) - 1,
9104 dev_driver_string(&pf->pdev->dev), pf->hw.pf_id);
9106 err = i40e_init_shared_code(hw);
9108 dev_info(&pdev->dev, "init_shared_code failed: %d\n", err);
9112 /* set up a default setting for link flow control */
9113 pf->hw.fc.requested_mode = I40E_FC_NONE;
9115 err = i40e_init_adminq(hw);
9116 dev_info(&pdev->dev, "%s\n", i40e_fw_version_str(hw));
9118 dev_info(&pdev->dev,
9119 "The driver for the device stopped because the NVM image is newer than expected. You must install the most recent version of the network driver.\n");
9123 if (hw->aq.api_maj_ver == I40E_FW_API_VERSION_MAJOR &&
9124 hw->aq.api_min_ver > I40E_FW_API_VERSION_MINOR)
9125 dev_info(&pdev->dev,
9126 "The driver for the device detected a newer version of the NVM image than expected. Please install the most recent version of the network driver.\n");
9127 else if (hw->aq.api_maj_ver < I40E_FW_API_VERSION_MAJOR ||
9128 hw->aq.api_min_ver < (I40E_FW_API_VERSION_MINOR - 1))
9129 dev_info(&pdev->dev,
9130 "The driver for the device detected an older version of the NVM image than expected. Please update the NVM image.\n");
9133 i40e_verify_eeprom(pf);
9135 /* Rev 0 hardware was never productized */
9136 if (hw->revision_id < 1)
9137 dev_warn(&pdev->dev, "This device is a pre-production adapter/LOM. Please be aware there may be issues with your hardware. If you are experiencing problems please contact your Intel or hardware representative who provided you with this hardware.\n");
9139 i40e_clear_pxe_mode(hw);
9140 err = i40e_get_capabilities(pf);
9142 goto err_adminq_setup;
9144 err = i40e_sw_init(pf);
9146 dev_info(&pdev->dev, "sw_init failed: %d\n", err);
9150 err = i40e_init_lan_hmc(hw, hw->func_caps.num_tx_qp,
9151 hw->func_caps.num_rx_qp,
9152 pf->fcoe_hmc_cntx_num, pf->fcoe_hmc_filt_num);
9154 dev_info(&pdev->dev, "init_lan_hmc failed: %d\n", err);
9155 goto err_init_lan_hmc;
9158 err = i40e_configure_lan_hmc(hw, I40E_HMC_MODEL_DIRECT_ONLY);
9160 dev_info(&pdev->dev, "configure_lan_hmc failed: %d\n", err);
9162 goto err_configure_lan_hmc;
9165 i40e_get_mac_addr(hw, hw->mac.addr);
9166 if (!is_valid_ether_addr(hw->mac.addr)) {
9167 dev_info(&pdev->dev, "invalid MAC address %pM\n", hw->mac.addr);
9171 dev_info(&pdev->dev, "MAC address: %pM\n", hw->mac.addr);
9172 ether_addr_copy(hw->mac.perm_addr, hw->mac.addr);
9173 i40e_get_port_mac_addr(hw, hw->mac.port_addr);
9174 if (is_valid_ether_addr(hw->mac.port_addr))
9175 pf->flags |= I40E_FLAG_PORT_ID_VALID;
9177 err = i40e_get_san_mac_addr(hw, hw->mac.san_addr);
9179 dev_info(&pdev->dev,
9180 "(non-fatal) SAN MAC retrieval failed: %d\n", err);
9181 if (!is_valid_ether_addr(hw->mac.san_addr)) {
9182 dev_warn(&pdev->dev, "invalid SAN MAC address %pM, falling back to LAN MAC\n",
9184 ether_addr_copy(hw->mac.san_addr, hw->mac.addr);
9186 dev_info(&pf->pdev->dev, "SAN MAC: %pM\n", hw->mac.san_addr);
9187 #endif /* I40E_FCOE */
9189 pci_set_drvdata(pdev, pf);
9190 pci_save_state(pdev);
9191 #ifdef CONFIG_I40E_DCB
9192 err = i40e_init_pf_dcb(pf);
9194 dev_info(&pdev->dev, "init_pf_dcb failed: %d\n", err);
9195 pf->flags &= ~I40E_FLAG_DCB_CAPABLE;
9196 /* Continue without DCB enabled */
9198 #endif /* CONFIG_I40E_DCB */
9200 /* set up periodic task facility */
9201 setup_timer(&pf->service_timer, i40e_service_timer, (unsigned long)pf);
9202 pf->service_timer_period = HZ;
9204 INIT_WORK(&pf->service_task, i40e_service_task);
9205 clear_bit(__I40E_SERVICE_SCHED, &pf->state);
9206 pf->flags |= I40E_FLAG_NEED_LINK_UPDATE;
9207 pf->link_check_timeout = jiffies;
9209 /* WoL defaults to disabled */
9211 device_set_wakeup_enable(&pf->pdev->dev, pf->wol_en);
9213 /* set up the main switch operations */
9214 i40e_determine_queue_usage(pf);
9215 i40e_init_interrupt_scheme(pf);
9217 /* The number of VSIs reported by the FW is the minimum guaranteed
9218 * to us; HW supports far more and we share the remaining pool with
9219 * the other PFs. We allocate space for more than the guarantee with
9220 * the understanding that we might not get them all later.
9222 if (pf->hw.func_caps.num_vsis < I40E_MIN_VSI_ALLOC)
9223 pf->num_alloc_vsi = I40E_MIN_VSI_ALLOC;
9225 pf->num_alloc_vsi = pf->hw.func_caps.num_vsis;
9227 /* Set up the *vsi struct and our local tracking of the MAIN PF vsi. */
9228 len = sizeof(struct i40e_vsi *) * pf->num_alloc_vsi;
9229 pf->vsi = kzalloc(len, GFP_KERNEL);
9232 goto err_switch_setup;
9235 err = i40e_setup_pf_switch(pf, false);
9237 dev_info(&pdev->dev, "setup_pf_switch failed: %d\n", err);
9240 /* if FDIR VSI was set up, start it now */
9241 for (i = 0; i < pf->num_alloc_vsi; i++) {
9242 if (pf->vsi[i] && pf->vsi[i]->type == I40E_VSI_FDIR) {
9243 i40e_vsi_open(pf->vsi[i]);
9248 /* driver is only interested in link up/down and module qualification
9249 * reports from firmware
9251 err = i40e_aq_set_phy_int_mask(&pf->hw,
9252 I40E_AQ_EVENT_LINK_UPDOWN |
9253 I40E_AQ_EVENT_MODULE_QUAL_FAIL, NULL);
9255 dev_info(&pf->pdev->dev, "set phy mask fail, aq_err %d\n", err);
9258 err = i40e_aq_set_link_restart_an(&pf->hw, true, NULL);
9260 dev_info(&pf->pdev->dev, "link restart failed, aq_err=%d\n",
9261 pf->hw.aq.asq_last_status);
9264 /* The main driver is (mostly) up and happy. We need to set this state
9265 * before setting up the misc vector or we get a race and the vector
9266 * ends up disabled forever.
9268 clear_bit(__I40E_DOWN, &pf->state);
9270 /* In case of MSIX we are going to setup the misc vector right here
9271 * to handle admin queue events etc. In case of legacy and MSI
9272 * the misc functionality and queue processing is combined in
9273 * the same vector and that gets setup at open.
9275 if (pf->flags & I40E_FLAG_MSIX_ENABLED) {
9276 err = i40e_setup_misc_vector(pf);
9278 dev_info(&pdev->dev,
9279 "setup of misc vector failed: %d\n", err);
9284 #ifdef CONFIG_PCI_IOV
9285 /* prep for VF support */
9286 if ((pf->flags & I40E_FLAG_SRIOV_ENABLED) &&
9287 (pf->flags & I40E_FLAG_MSIX_ENABLED) &&
9288 !test_bit(__I40E_BAD_EEPROM, &pf->state)) {
9291 /* disable link interrupts for VFs */
9292 val = rd32(hw, I40E_PFGEN_PORTMDIO_NUM);
9293 val &= ~I40E_PFGEN_PORTMDIO_NUM_VFLINK_STAT_ENA_MASK;
9294 wr32(hw, I40E_PFGEN_PORTMDIO_NUM, val);
9297 if (pci_num_vf(pdev)) {
9298 dev_info(&pdev->dev,
9299 "Active VFs found, allocating resources.\n");
9300 err = i40e_alloc_vfs(pf, pci_num_vf(pdev));
9302 dev_info(&pdev->dev,
9303 "Error %d allocating resources for existing VFs\n",
9307 #endif /* CONFIG_PCI_IOV */
9311 i40e_dbg_pf_init(pf);
9313 /* tell the firmware that we're starting */
9314 i40e_send_version(pf);
9316 /* since everything's happy, start the service_task timer */
9317 mod_timer(&pf->service_timer,
9318 round_jiffies(jiffies + pf->service_timer_period));
9321 /* create FCoE interface */
9322 i40e_fcoe_vsi_setup(pf);
9325 /* Get the negotiated link width and speed from PCI config space */
9326 pcie_capability_read_word(pf->pdev, PCI_EXP_LNKSTA, &link_status);
9328 i40e_set_pci_config_data(hw, link_status);
9330 dev_info(&pdev->dev, "PCI-Express: %s %s\n",
9331 (hw->bus.speed == i40e_bus_speed_8000 ? "Speed 8.0GT/s" :
9332 hw->bus.speed == i40e_bus_speed_5000 ? "Speed 5.0GT/s" :
9333 hw->bus.speed == i40e_bus_speed_2500 ? "Speed 2.5GT/s" :
9335 (hw->bus.width == i40e_bus_width_pcie_x8 ? "Width x8" :
9336 hw->bus.width == i40e_bus_width_pcie_x4 ? "Width x4" :
9337 hw->bus.width == i40e_bus_width_pcie_x2 ? "Width x2" :
9338 hw->bus.width == i40e_bus_width_pcie_x1 ? "Width x1" :
9341 if (hw->bus.width < i40e_bus_width_pcie_x8 ||
9342 hw->bus.speed < i40e_bus_speed_8000) {
9343 dev_warn(&pdev->dev, "PCI-Express bandwidth available for this device may be insufficient for optimal performance.\n");
9344 dev_warn(&pdev->dev, "Please move the device to a different PCI-e link with more lanes and/or higher transfer rate.\n");
9347 /* print a string summarizing features */
9348 i40e_print_features(pf);
9352 /* Unwind what we've done if something failed in the setup */
9354 set_bit(__I40E_DOWN, &pf->state);
9355 i40e_clear_interrupt_scheme(pf);
9358 i40e_reset_interrupt_capability(pf);
9359 del_timer_sync(&pf->service_timer);
9361 err_configure_lan_hmc:
9362 (void)i40e_shutdown_lan_hmc(hw);
9365 kfree(pf->irq_pile);
9368 (void)i40e_shutdown_adminq(hw);
9370 iounmap(hw->hw_addr);
9374 pci_disable_pcie_error_reporting(pdev);
9375 pci_release_selected_regions(pdev,
9376 pci_select_bars(pdev, IORESOURCE_MEM));
9379 pci_disable_device(pdev);
9384 * i40e_remove - Device removal routine
9385 * @pdev: PCI device information struct
9387 * i40e_remove is called by the PCI subsystem to alert the driver
9388 * that is should release a PCI device. This could be caused by a
9389 * Hot-Plug event, or because the driver is going to be removed from
9392 static void i40e_remove(struct pci_dev *pdev)
9394 struct i40e_pf *pf = pci_get_drvdata(pdev);
9395 i40e_status ret_code;
9398 i40e_dbg_pf_exit(pf);
9402 /* no more scheduling of any task */
9403 set_bit(__I40E_DOWN, &pf->state);
9404 del_timer_sync(&pf->service_timer);
9405 cancel_work_sync(&pf->service_task);
9407 if (pf->flags & I40E_FLAG_SRIOV_ENABLED) {
9409 pf->flags &= ~I40E_FLAG_SRIOV_ENABLED;
9412 i40e_fdir_teardown(pf);
9414 /* If there is a switch structure or any orphans, remove them.
9415 * This will leave only the PF's VSI remaining.
9417 for (i = 0; i < I40E_MAX_VEB; i++) {
9421 if (pf->veb[i]->uplink_seid == pf->mac_seid ||
9422 pf->veb[i]->uplink_seid == 0)
9423 i40e_switch_branch_release(pf->veb[i]);
9426 /* Now we can shutdown the PF's VSI, just before we kill
9429 if (pf->vsi[pf->lan_vsi])
9430 i40e_vsi_release(pf->vsi[pf->lan_vsi]);
9432 i40e_stop_misc_vector(pf);
9433 if (pf->flags & I40E_FLAG_MSIX_ENABLED) {
9434 synchronize_irq(pf->msix_entries[0].vector);
9435 free_irq(pf->msix_entries[0].vector, pf);
9438 /* shutdown and destroy the HMC */
9439 if (pf->hw.hmc.hmc_obj) {
9440 ret_code = i40e_shutdown_lan_hmc(&pf->hw);
9442 dev_warn(&pdev->dev,
9443 "Failed to destroy the HMC resources: %d\n",
9447 /* shutdown the adminq */
9448 ret_code = i40e_shutdown_adminq(&pf->hw);
9450 dev_warn(&pdev->dev,
9451 "Failed to destroy the Admin Queue resources: %d\n",
9454 /* Clear all dynamic memory lists of rings, q_vectors, and VSIs */
9455 i40e_clear_interrupt_scheme(pf);
9456 for (i = 0; i < pf->num_alloc_vsi; i++) {
9458 i40e_vsi_clear_rings(pf->vsi[i]);
9459 i40e_vsi_clear(pf->vsi[i]);
9464 for (i = 0; i < I40E_MAX_VEB; i++) {
9470 kfree(pf->irq_pile);
9473 iounmap(pf->hw.hw_addr);
9475 pci_release_selected_regions(pdev,
9476 pci_select_bars(pdev, IORESOURCE_MEM));
9478 pci_disable_pcie_error_reporting(pdev);
9479 pci_disable_device(pdev);
9483 * i40e_pci_error_detected - warning that something funky happened in PCI land
9484 * @pdev: PCI device information struct
9486 * Called to warn that something happened and the error handling steps
9487 * are in progress. Allows the driver to quiesce things, be ready for
9490 static pci_ers_result_t i40e_pci_error_detected(struct pci_dev *pdev,
9491 enum pci_channel_state error)
9493 struct i40e_pf *pf = pci_get_drvdata(pdev);
9495 dev_info(&pdev->dev, "%s: error %d\n", __func__, error);
9497 /* shutdown all operations */
9498 if (!test_bit(__I40E_SUSPENDED, &pf->state)) {
9500 i40e_prep_for_reset(pf);
9504 /* Request a slot reset */
9505 return PCI_ERS_RESULT_NEED_RESET;
9509 * i40e_pci_error_slot_reset - a PCI slot reset just happened
9510 * @pdev: PCI device information struct
9512 * Called to find if the driver can work with the device now that
9513 * the pci slot has been reset. If a basic connection seems good
9514 * (registers are readable and have sane content) then return a
9515 * happy little PCI_ERS_RESULT_xxx.
9517 static pci_ers_result_t i40e_pci_error_slot_reset(struct pci_dev *pdev)
9519 struct i40e_pf *pf = pci_get_drvdata(pdev);
9520 pci_ers_result_t result;
9524 dev_info(&pdev->dev, "%s\n", __func__);
9525 if (pci_enable_device_mem(pdev)) {
9526 dev_info(&pdev->dev,
9527 "Cannot re-enable PCI device after reset.\n");
9528 result = PCI_ERS_RESULT_DISCONNECT;
9530 pci_set_master(pdev);
9531 pci_restore_state(pdev);
9532 pci_save_state(pdev);
9533 pci_wake_from_d3(pdev, false);
9535 reg = rd32(&pf->hw, I40E_GLGEN_RTRIG);
9537 result = PCI_ERS_RESULT_RECOVERED;
9539 result = PCI_ERS_RESULT_DISCONNECT;
9542 err = pci_cleanup_aer_uncorrect_error_status(pdev);
9544 dev_info(&pdev->dev,
9545 "pci_cleanup_aer_uncorrect_error_status failed 0x%0x\n",
9547 /* non-fatal, continue */
9554 * i40e_pci_error_resume - restart operations after PCI error recovery
9555 * @pdev: PCI device information struct
9557 * Called to allow the driver to bring things back up after PCI error
9558 * and/or reset recovery has finished.
9560 static void i40e_pci_error_resume(struct pci_dev *pdev)
9562 struct i40e_pf *pf = pci_get_drvdata(pdev);
9564 dev_info(&pdev->dev, "%s\n", __func__);
9565 if (test_bit(__I40E_SUSPENDED, &pf->state))
9569 i40e_handle_reset_warning(pf);
9574 * i40e_shutdown - PCI callback for shutting down
9575 * @pdev: PCI device information struct
9577 static void i40e_shutdown(struct pci_dev *pdev)
9579 struct i40e_pf *pf = pci_get_drvdata(pdev);
9580 struct i40e_hw *hw = &pf->hw;
9582 set_bit(__I40E_SUSPENDED, &pf->state);
9583 set_bit(__I40E_DOWN, &pf->state);
9585 i40e_prep_for_reset(pf);
9588 wr32(hw, I40E_PFPM_APM, (pf->wol_en ? I40E_PFPM_APM_APME_MASK : 0));
9589 wr32(hw, I40E_PFPM_WUFC, (pf->wol_en ? I40E_PFPM_WUFC_MAG_MASK : 0));
9591 if (system_state == SYSTEM_POWER_OFF) {
9592 pci_wake_from_d3(pdev, pf->wol_en);
9593 pci_set_power_state(pdev, PCI_D3hot);
9599 * i40e_suspend - PCI callback for moving to D3
9600 * @pdev: PCI device information struct
9602 static int i40e_suspend(struct pci_dev *pdev, pm_message_t state)
9604 struct i40e_pf *pf = pci_get_drvdata(pdev);
9605 struct i40e_hw *hw = &pf->hw;
9607 set_bit(__I40E_SUSPENDED, &pf->state);
9608 set_bit(__I40E_DOWN, &pf->state);
9610 i40e_prep_for_reset(pf);
9613 wr32(hw, I40E_PFPM_APM, (pf->wol_en ? I40E_PFPM_APM_APME_MASK : 0));
9614 wr32(hw, I40E_PFPM_WUFC, (pf->wol_en ? I40E_PFPM_WUFC_MAG_MASK : 0));
9616 pci_wake_from_d3(pdev, pf->wol_en);
9617 pci_set_power_state(pdev, PCI_D3hot);
9623 * i40e_resume - PCI callback for waking up from D3
9624 * @pdev: PCI device information struct
9626 static int i40e_resume(struct pci_dev *pdev)
9628 struct i40e_pf *pf = pci_get_drvdata(pdev);
9631 pci_set_power_state(pdev, PCI_D0);
9632 pci_restore_state(pdev);
9633 /* pci_restore_state() clears dev->state_saves, so
9634 * call pci_save_state() again to restore it.
9636 pci_save_state(pdev);
9638 err = pci_enable_device_mem(pdev);
9641 "%s: Cannot enable PCI device from suspend\n",
9645 pci_set_master(pdev);
9647 /* no wakeup events while running */
9648 pci_wake_from_d3(pdev, false);
9650 /* handling the reset will rebuild the device state */
9651 if (test_and_clear_bit(__I40E_SUSPENDED, &pf->state)) {
9652 clear_bit(__I40E_DOWN, &pf->state);
9654 i40e_reset_and_rebuild(pf, false);
9662 static const struct pci_error_handlers i40e_err_handler = {
9663 .error_detected = i40e_pci_error_detected,
9664 .slot_reset = i40e_pci_error_slot_reset,
9665 .resume = i40e_pci_error_resume,
9668 static struct pci_driver i40e_driver = {
9669 .name = i40e_driver_name,
9670 .id_table = i40e_pci_tbl,
9671 .probe = i40e_probe,
9672 .remove = i40e_remove,
9674 .suspend = i40e_suspend,
9675 .resume = i40e_resume,
9677 .shutdown = i40e_shutdown,
9678 .err_handler = &i40e_err_handler,
9679 .sriov_configure = i40e_pci_sriov_configure,
9683 * i40e_init_module - Driver registration routine
9685 * i40e_init_module is the first routine called when the driver is
9686 * loaded. All it does is register with the PCI subsystem.
9688 static int __init i40e_init_module(void)
9690 pr_info("%s: %s - version %s\n", i40e_driver_name,
9691 i40e_driver_string, i40e_driver_version_str);
9692 pr_info("%s: %s\n", i40e_driver_name, i40e_copyright);
9694 return pci_register_driver(&i40e_driver);
9696 module_init(i40e_init_module);
9699 * i40e_exit_module - Driver exit cleanup routine
9701 * i40e_exit_module is called just before the driver is removed
9704 static void __exit i40e_exit_module(void)
9706 pci_unregister_driver(&i40e_driver);
9709 module_exit(i40e_exit_module);