1 /*******************************************************************************
3 Intel 82599 Virtual Function driver
4 Copyright(c) 1999 - 2010 Intel Corporation.
6 This program is free software; you can redistribute it and/or modify it
7 under the terms and conditions of the GNU General Public License,
8 version 2, as published by the Free Software Foundation.
10 This program is distributed in the hope it will be useful, but WITHOUT
11 ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
12 FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
15 You should have received a copy of the GNU General Public License along with
16 this program; if not, write to the Free Software Foundation, Inc.,
17 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
19 The full GNU General Public License is included in this distribution in
20 the file called "COPYING".
23 e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
24 Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
26 *******************************************************************************/
32 * ixgbevf_start_hw_vf - Prepare hardware for Tx/Rx
33 * @hw: pointer to hardware structure
35 * Starts the hardware by filling the bus info structure and media type, clears
36 * all on chip counters, initializes receive address registers, multicast
37 * table, VLAN filter table, calls routine to set up link and flow control
38 * settings, and leaves transmit and receive units disabled and uninitialized
40 static s32 ixgbevf_start_hw_vf(struct ixgbe_hw *hw)
42 /* Clear adapter stopped flag */
43 hw->adapter_stopped = false;
49 * ixgbevf_init_hw_vf - virtual function hardware initialization
50 * @hw: pointer to hardware structure
52 * Initialize the hardware by resetting the hardware and then starting
55 static s32 ixgbevf_init_hw_vf(struct ixgbe_hw *hw)
57 s32 status = hw->mac.ops.start_hw(hw);
59 hw->mac.ops.get_mac_addr(hw, hw->mac.addr);
65 * ixgbevf_reset_hw_vf - Performs hardware reset
66 * @hw: pointer to hardware structure
68 * Resets the hardware by reseting the transmit and receive units, masks and
69 * clears all interrupts.
71 static s32 ixgbevf_reset_hw_vf(struct ixgbe_hw *hw)
73 struct ixgbe_mbx_info *mbx = &hw->mbx;
74 u32 timeout = IXGBE_VF_INIT_TIMEOUT;
75 s32 ret_val = IXGBE_ERR_INVALID_MAC_ADDR;
76 u32 msgbuf[IXGBE_VF_PERMADDR_MSG_LEN];
77 u8 *addr = (u8 *)(&msgbuf[1]);
79 /* Call adapter stop to disable tx/rx and clear interrupts */
80 hw->mac.ops.stop_adapter(hw);
82 IXGBE_WRITE_REG(hw, IXGBE_VFCTRL, IXGBE_CTRL_RST);
83 IXGBE_WRITE_FLUSH(hw);
85 /* we cannot reset while the RSTI / RSTD bits are asserted */
86 while (!mbx->ops.check_for_rst(hw) && timeout) {
92 return IXGBE_ERR_RESET_FAILED;
94 /* mailbox timeout can now become active */
95 mbx->timeout = IXGBE_VF_MBX_INIT_TIMEOUT;
97 msgbuf[0] = IXGBE_VF_RESET;
98 mbx->ops.write_posted(hw, msgbuf, 1);
102 /* set our "perm_addr" based on info provided by PF */
103 /* also set up the mc_filter_type which is piggy backed
104 * on the mac address in word 3 */
105 ret_val = mbx->ops.read_posted(hw, msgbuf, IXGBE_VF_PERMADDR_MSG_LEN);
109 if (msgbuf[0] != (IXGBE_VF_RESET | IXGBE_VT_MSGTYPE_ACK))
110 return IXGBE_ERR_INVALID_MAC_ADDR;
112 memcpy(hw->mac.perm_addr, addr, ETH_ALEN);
113 hw->mac.mc_filter_type = msgbuf[IXGBE_VF_MC_TYPE_WORD];
119 * ixgbevf_stop_hw_vf - Generic stop Tx/Rx units
120 * @hw: pointer to hardware structure
122 * Sets the adapter_stopped flag within ixgbe_hw struct. Clears interrupts,
123 * disables transmit and receive units. The adapter_stopped flag is used by
124 * the shared code and drivers to determine if the adapter is in a stopped
125 * state and should not touch the hardware.
127 static s32 ixgbevf_stop_hw_vf(struct ixgbe_hw *hw)
129 u32 number_of_queues;
134 * Set the adapter_stopped flag so other driver functions stop touching
137 hw->adapter_stopped = true;
139 /* Disable the receive unit by stopped each queue */
140 number_of_queues = hw->mac.max_rx_queues;
141 for (i = 0; i < number_of_queues; i++) {
142 reg_val = IXGBE_READ_REG(hw, IXGBE_VFRXDCTL(i));
143 if (reg_val & IXGBE_RXDCTL_ENABLE) {
144 reg_val &= ~IXGBE_RXDCTL_ENABLE;
145 IXGBE_WRITE_REG(hw, IXGBE_VFRXDCTL(i), reg_val);
149 IXGBE_WRITE_FLUSH(hw);
151 /* Clear interrupt mask to stop from interrupts being generated */
152 IXGBE_WRITE_REG(hw, IXGBE_VTEIMC, IXGBE_VF_IRQ_CLEAR_MASK);
154 /* Clear any pending interrupts */
155 IXGBE_READ_REG(hw, IXGBE_VTEICR);
157 /* Disable the transmit unit. Each queue must be disabled. */
158 number_of_queues = hw->mac.max_tx_queues;
159 for (i = 0; i < number_of_queues; i++) {
160 reg_val = IXGBE_READ_REG(hw, IXGBE_VFTXDCTL(i));
161 if (reg_val & IXGBE_TXDCTL_ENABLE) {
162 reg_val &= ~IXGBE_TXDCTL_ENABLE;
163 IXGBE_WRITE_REG(hw, IXGBE_VFTXDCTL(i), reg_val);
171 * ixgbevf_mta_vector - Determines bit-vector in multicast table to set
172 * @hw: pointer to hardware structure
173 * @mc_addr: the multicast address
175 * Extracts the 12 bits, from a multicast address, to determine which
176 * bit-vector to set in the multicast table. The hardware uses 12 bits, from
177 * incoming rx multicast addresses, to determine the bit-vector to check in
178 * the MTA. Which of the 4 combination, of 12-bits, the hardware uses is set
179 * by the MO field of the MCSTCTRL. The MO field is set during initialization
182 static s32 ixgbevf_mta_vector(struct ixgbe_hw *hw, u8 *mc_addr)
186 switch (hw->mac.mc_filter_type) {
187 case 0: /* use bits [47:36] of the address */
188 vector = ((mc_addr[4] >> 4) | (((u16)mc_addr[5]) << 4));
190 case 1: /* use bits [46:35] of the address */
191 vector = ((mc_addr[4] >> 3) | (((u16)mc_addr[5]) << 5));
193 case 2: /* use bits [45:34] of the address */
194 vector = ((mc_addr[4] >> 2) | (((u16)mc_addr[5]) << 6));
196 case 3: /* use bits [43:32] of the address */
197 vector = ((mc_addr[4]) | (((u16)mc_addr[5]) << 8));
199 default: /* Invalid mc_filter_type */
203 /* vector can only be 12-bits or boundary will be exceeded */
209 * ixgbevf_get_mac_addr_vf - Read device MAC address
210 * @hw: pointer to the HW structure
211 * @mac_addr: pointer to storage for retrieved MAC address
213 static s32 ixgbevf_get_mac_addr_vf(struct ixgbe_hw *hw, u8 *mac_addr)
215 memcpy(mac_addr, hw->mac.perm_addr, ETH_ALEN);
220 static s32 ixgbevf_set_uc_addr_vf(struct ixgbe_hw *hw, u32 index, u8 *addr)
222 struct ixgbe_mbx_info *mbx = &hw->mbx;
224 u8 *msg_addr = (u8 *)(&msgbuf[1]);
227 memset(msgbuf, 0, sizeof(msgbuf));
229 * If index is one then this is the start of a new list and needs
230 * indication to the PF so it can do it's own list management.
231 * If it is zero then that tells the PF to just clear all of
232 * this VF's macvlans and there is no new list.
234 msgbuf[0] |= index << IXGBE_VT_MSGINFO_SHIFT;
235 msgbuf[0] |= IXGBE_VF_SET_MACVLAN;
237 memcpy(msg_addr, addr, 6);
238 ret_val = mbx->ops.write_posted(hw, msgbuf, 3);
241 ret_val = mbx->ops.read_posted(hw, msgbuf, 3);
243 msgbuf[0] &= ~IXGBE_VT_MSGTYPE_CTS;
247 (IXGBE_VF_SET_MACVLAN | IXGBE_VT_MSGTYPE_NACK))
254 * ixgbevf_set_rar_vf - set device MAC address
255 * @hw: pointer to hardware structure
256 * @index: Receive address register to write
257 * @addr: Address to put into receive address register
258 * @vmdq: Unused in this implementation
260 static s32 ixgbevf_set_rar_vf(struct ixgbe_hw *hw, u32 index, u8 *addr,
263 struct ixgbe_mbx_info *mbx = &hw->mbx;
265 u8 *msg_addr = (u8 *)(&msgbuf[1]);
268 memset(msgbuf, 0, sizeof(msgbuf));
269 msgbuf[0] = IXGBE_VF_SET_MAC_ADDR;
270 memcpy(msg_addr, addr, 6);
271 ret_val = mbx->ops.write_posted(hw, msgbuf, 3);
274 ret_val = mbx->ops.read_posted(hw, msgbuf, 3);
276 msgbuf[0] &= ~IXGBE_VT_MSGTYPE_CTS;
278 /* if nacked the address was rejected, use "perm_addr" */
280 (msgbuf[0] == (IXGBE_VF_SET_MAC_ADDR | IXGBE_VT_MSGTYPE_NACK)))
281 ixgbevf_get_mac_addr_vf(hw, hw->mac.addr);
287 * ixgbevf_update_mc_addr_list_vf - Update Multicast addresses
288 * @hw: pointer to the HW structure
289 * @netdev: pointer to net device structure
291 * Updates the Multicast Table Array.
293 static s32 ixgbevf_update_mc_addr_list_vf(struct ixgbe_hw *hw,
294 struct net_device *netdev)
296 struct netdev_hw_addr *ha;
297 struct ixgbe_mbx_info *mbx = &hw->mbx;
298 u32 msgbuf[IXGBE_VFMAILBOX_SIZE];
299 u16 *vector_list = (u16 *)&msgbuf[1];
302 /* Each entry in the list uses 1 16 bit word. We have 30
303 * 16 bit words available in our HW msg buffer (minus 1 for the
304 * msg type). That's 30 hash values if we pack 'em right. If
305 * there are more than 30 MC addresses to add then punt the
306 * extras for now and then add code to handle more than 30 later.
307 * It would be unusual for a server to request that many multi-cast
308 * addresses except for in large enterprise network environments.
311 cnt = netdev_mc_count(netdev);
314 msgbuf[0] = IXGBE_VF_SET_MULTICAST;
315 msgbuf[0] |= cnt << IXGBE_VT_MSGINFO_SHIFT;
318 netdev_for_each_mc_addr(ha, netdev) {
321 vector_list[i++] = ixgbevf_mta_vector(hw, ha->addr);
324 mbx->ops.write_posted(hw, msgbuf, IXGBE_VFMAILBOX_SIZE);
330 * ixgbevf_set_vfta_vf - Set/Unset vlan filter table address
331 * @hw: pointer to the HW structure
332 * @vlan: 12 bit VLAN ID
333 * @vind: unused by VF drivers
334 * @vlan_on: if true then set bit, else clear bit
336 static s32 ixgbevf_set_vfta_vf(struct ixgbe_hw *hw, u32 vlan, u32 vind,
339 struct ixgbe_mbx_info *mbx = &hw->mbx;
342 msgbuf[0] = IXGBE_VF_SET_VLAN;
344 /* Setting the 8 bit field MSG INFO to TRUE indicates "add" */
345 msgbuf[0] |= vlan_on << IXGBE_VT_MSGINFO_SHIFT;
347 return mbx->ops.write_posted(hw, msgbuf, 2);
351 * ixgbevf_setup_mac_link_vf - Setup MAC link settings
352 * @hw: pointer to hardware structure
353 * @speed: Unused in this implementation
354 * @autoneg: Unused in this implementation
355 * @autoneg_wait_to_complete: Unused in this implementation
357 * Do nothing and return success. VF drivers are not allowed to change
358 * global settings. Maintained for driver compatibility.
360 static s32 ixgbevf_setup_mac_link_vf(struct ixgbe_hw *hw,
361 ixgbe_link_speed speed, bool autoneg,
362 bool autoneg_wait_to_complete)
368 * ixgbevf_check_mac_link_vf - Get link/speed status
369 * @hw: pointer to hardware structure
370 * @speed: pointer to link speed
371 * @link_up: true is link is up, false otherwise
372 * @autoneg_wait_to_complete: true when waiting for completion is needed
374 * Reads the links register to determine if link is up and the current speed
376 static s32 ixgbevf_check_mac_link_vf(struct ixgbe_hw *hw,
377 ixgbe_link_speed *speed,
379 bool autoneg_wait_to_complete)
383 if (!(hw->mbx.ops.check_for_rst(hw))) {
389 links_reg = IXGBE_READ_REG(hw, IXGBE_VFLINKS);
391 if (links_reg & IXGBE_LINKS_UP)
396 if ((links_reg & IXGBE_LINKS_SPEED_82599) ==
397 IXGBE_LINKS_SPEED_10G_82599)
398 *speed = IXGBE_LINK_SPEED_10GB_FULL;
400 *speed = IXGBE_LINK_SPEED_1GB_FULL;
405 static const struct ixgbe_mac_operations ixgbevf_mac_ops = {
406 .init_hw = ixgbevf_init_hw_vf,
407 .reset_hw = ixgbevf_reset_hw_vf,
408 .start_hw = ixgbevf_start_hw_vf,
409 .get_mac_addr = ixgbevf_get_mac_addr_vf,
410 .stop_adapter = ixgbevf_stop_hw_vf,
411 .setup_link = ixgbevf_setup_mac_link_vf,
412 .check_link = ixgbevf_check_mac_link_vf,
413 .set_rar = ixgbevf_set_rar_vf,
414 .update_mc_addr_list = ixgbevf_update_mc_addr_list_vf,
415 .set_uc_addr = ixgbevf_set_uc_addr_vf,
416 .set_vfta = ixgbevf_set_vfta_vf,
419 const struct ixgbevf_info ixgbevf_82599_vf_info = {
420 .mac = ixgbe_mac_82599_vf,
421 .mac_ops = &ixgbevf_mac_ops,
424 const struct ixgbevf_info ixgbevf_X540_vf_info = {
425 .mac = ixgbe_mac_X540_vf,
426 .mac_ops = &ixgbevf_mac_ops,