2 # Marvell device configuration
5 config NET_VENDOR_MARVELL
8 depends on PCI || CPU_PXA168 || MV64X60 || PPC32 || PLAT_ORION || INET
10 If you have a network (Ethernet) card belonging to this class, say Y
11 and read the Ethernet-HOWTO, available from
12 <http://www.tldp.org/docs.html#howto>.
14 Note that the answer to this question doesn't directly affect the
15 kernel: saying N will just cause the configurator to skip all
16 the questions about Marvell devices. If you say Y, you will be
17 asked for your specific card in the following questions.
22 tristate "Marvell Discovery (643XX) and Orion ethernet support"
23 depends on (MV64X60 || PPC32 || PLAT_ORION) && INET
27 This driver supports the gigabit ethernet MACs in the
28 Marvell Discovery PPC/MIPS chipset family (MV643XX) and
29 in the Marvell Orion ARM SoC family.
31 Some boards that use the Discovery chipset are the Momenco
32 Ocelot C and Jaguar ATX and Pegasos II.
35 tristate "Marvell MDIO interface support"
37 This driver supports the MDIO interface found in the network
38 interface units of the Marvell EBU SoCs (Kirkwood, Orion5x,
39 Dove, Armada 370 and Armada XP).
41 For now, this driver is only needed for the MVNETA driver
42 (used on Armada 370 and XP), but it could be used in the
43 future by the MV643XX_ETH driver.
46 tristate "Marvell Armada 370/XP network interface support"
47 depends on MACH_ARMADA_370_XP
51 This driver supports the network interface units in the
52 Marvell ARMADA XP and ARMADA 370 SoC family.
54 Note that this driver is distinct from the mv643xx_eth
55 driver, which should be used for the older Marvell SoCs
56 (Dove, Orion, Discovery, Kirkwood).
59 tristate "Marvell pxa168 ethernet support"
63 This driver supports the pxa168 Ethernet ports.
65 To compile this driver as a module, choose M here. The module
66 will be called pxa168_eth.
69 tristate "Marvell Yukon Gigabit Ethernet support"
73 This driver support the Marvell Yukon or SysKonnect SK-98xx/SK-95xx
74 and related Gigabit Ethernet adapters. It is a new smaller driver
75 with better performance and more complete ethtool support.
77 It does not support the link failover and network management
78 features that "portable" vendor supplied sk98lin driver does.
80 This driver supports adapters based on the original Yukon chipset:
81 Marvell 88E8001, Belkin F5D5005, CNet GigaCard, DLink DGE-530T,
82 Linksys EG1032/EG1064, 3Com 3C940/3C940B, SysKonnect SK-9871/9872.
84 It does not support the newer Yukon2 chipset: a separate driver,
85 sky2, is provided for these adapters.
87 To compile this driver as a module, choose M here: the module
88 will be called skge. This is recommended.
91 bool "Debugging interface"
92 depends on SKGE && DEBUG_FS
94 This option adds the ability to dump driver state for debugging.
95 The file /sys/kernel/debug/skge/ethX displays the state of the internal
96 transmit and receive rings.
101 bool "Support for older SysKonnect Genesis boards"
104 This enables support for the older and uncommon SysKonnect Genesis
105 chips, which support MII via an external transceiver, instead of
106 an internal one. Disabling this option will save some memory
107 by making code smaller. If unsure say Y.
110 tristate "Marvell Yukon 2 support"
114 This driver supports Gigabit Ethernet adapters based on the
115 Marvell Yukon 2 chipset:
116 Marvell 88E8021/88E8022/88E8035/88E8036/88E8038/88E8050/88E8052/
117 88E8053/88E8055/88E8061/88E8062, SysKonnect SK-9E21D/SK-9S21
119 There is companion driver for the older Marvell Yukon and
120 SysKonnect Genesis based adapters: skge.
122 To compile this driver as a module, choose M here: the module
123 will be called sky2. This is recommended.
126 bool "Debugging interface"
127 depends on SKY2 && DEBUG_FS
129 This option adds the ability to dump driver state for debugging.
130 The file /sys/kernel/debug/sky2/ethX displays the state of the internal
131 transmit and receive rings.
135 endif # NET_VENDOR_MARVELL