Merge branch 'master' of git://1984.lsi.us.es/nf-next
[firefly-linux-kernel-4.4.55.git] / drivers / net / ethernet / marvell / mvmdio.c
1 /*
2  * Driver for the MDIO interface of Marvell network interfaces.
3  *
4  * Since the MDIO interface of Marvell network interfaces is shared
5  * between all network interfaces, having a single driver allows to
6  * handle concurrent accesses properly (you may have four Ethernet
7  * ports, but they in fact share the same SMI interface to access the
8  * MDIO bus). Moreover, this MDIO interface code is similar between
9  * the mv643xx_eth driver and the mvneta driver. For now, it is only
10  * used by the mvneta driver, but it could later be used by the
11  * mv643xx_eth driver as well.
12  *
13  * Copyright (C) 2012 Marvell
14  *
15  * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
16  *
17  * This file is licensed under the terms of the GNU General Public
18  * License version 2. This program is licensed "as is" without any
19  * warranty of any kind, whether express or implied.
20  */
21
22 #include <linux/init.h>
23 #include <linux/kernel.h>
24 #include <linux/module.h>
25 #include <linux/mutex.h>
26 #include <linux/phy.h>
27 #include <linux/interrupt.h>
28 #include <linux/platform_device.h>
29 #include <linux/delay.h>
30 #include <linux/io.h>
31 #include <linux/of_mdio.h>
32 #include <linux/sched.h>
33 #include <linux/wait.h>
34
35 #define MVMDIO_SMI_DATA_SHIFT              0
36 #define MVMDIO_SMI_PHY_ADDR_SHIFT          16
37 #define MVMDIO_SMI_PHY_REG_SHIFT           21
38 #define MVMDIO_SMI_READ_OPERATION          BIT(26)
39 #define MVMDIO_SMI_WRITE_OPERATION         0
40 #define MVMDIO_SMI_READ_VALID              BIT(27)
41 #define MVMDIO_SMI_BUSY                    BIT(28)
42 #define MVMDIO_ERR_INT_CAUSE               0x007C
43 #define  MVMDIO_ERR_INT_SMI_DONE           0x00000010
44 #define MVMDIO_ERR_INT_MASK                0x0080
45
46 struct orion_mdio_dev {
47         struct mutex lock;
48         void __iomem *regs;
49         /*
50          * If we have access to the error interrupt pin (which is
51          * somewhat misnamed as it not only reflects internal errors
52          * but also reflects SMI completion), use that to wait for
53          * SMI access completion instead of polling the SMI busy bit.
54          */
55         int err_interrupt;
56         wait_queue_head_t smi_busy_wait;
57 };
58
59 static int orion_mdio_smi_is_done(struct orion_mdio_dev *dev)
60 {
61         return !(readl(dev->regs) & MVMDIO_SMI_BUSY);
62 }
63
64 /* Wait for the SMI unit to be ready for another operation
65  */
66 static int orion_mdio_wait_ready(struct mii_bus *bus)
67 {
68         struct orion_mdio_dev *dev = bus->priv;
69         int count;
70
71         if (dev->err_interrupt <= 0) {
72                 count = 0;
73                 while (1) {
74                         if (orion_mdio_smi_is_done(dev))
75                                 break;
76
77                         if (count > 100) {
78                                 dev_err(bus->parent,
79                                         "Timeout: SMI busy for too long\n");
80                                 return -ETIMEDOUT;
81                         }
82
83                         udelay(10);
84                         count++;
85                 }
86         } else {
87                 if (!orion_mdio_smi_is_done(dev)) {
88                         wait_event_timeout(dev->smi_busy_wait,
89                                 orion_mdio_smi_is_done(dev),
90                                 msecs_to_jiffies(100));
91                         if (!orion_mdio_smi_is_done(dev))
92                                 return -ETIMEDOUT;
93                 }
94         }
95
96         return 0;
97 }
98
99 static int orion_mdio_read(struct mii_bus *bus, int mii_id,
100                            int regnum)
101 {
102         struct orion_mdio_dev *dev = bus->priv;
103         int count;
104         u32 val;
105         int ret;
106
107         mutex_lock(&dev->lock);
108
109         ret = orion_mdio_wait_ready(bus);
110         if (ret < 0) {
111                 mutex_unlock(&dev->lock);
112                 return ret;
113         }
114
115         writel(((mii_id << MVMDIO_SMI_PHY_ADDR_SHIFT) |
116                 (regnum << MVMDIO_SMI_PHY_REG_SHIFT)  |
117                 MVMDIO_SMI_READ_OPERATION),
118                dev->regs);
119
120         /* Wait for the value to become available */
121         count = 0;
122         while (1) {
123                 val = readl(dev->regs);
124                 if (val & MVMDIO_SMI_READ_VALID)
125                         break;
126
127                 if (count > 100) {
128                         dev_err(bus->parent, "Timeout when reading PHY\n");
129                         mutex_unlock(&dev->lock);
130                         return -ETIMEDOUT;
131                 }
132
133                 udelay(10);
134                 count++;
135         }
136
137         mutex_unlock(&dev->lock);
138
139         return val & 0xFFFF;
140 }
141
142 static int orion_mdio_write(struct mii_bus *bus, int mii_id,
143                             int regnum, u16 value)
144 {
145         struct orion_mdio_dev *dev = bus->priv;
146         int ret;
147
148         mutex_lock(&dev->lock);
149
150         ret = orion_mdio_wait_ready(bus);
151         if (ret < 0) {
152                 mutex_unlock(&dev->lock);
153                 return ret;
154         }
155
156         writel(((mii_id << MVMDIO_SMI_PHY_ADDR_SHIFT) |
157                 (regnum << MVMDIO_SMI_PHY_REG_SHIFT)  |
158                 MVMDIO_SMI_WRITE_OPERATION            |
159                 (value << MVMDIO_SMI_DATA_SHIFT)),
160                dev->regs);
161
162         mutex_unlock(&dev->lock);
163
164         return 0;
165 }
166
167 static int orion_mdio_reset(struct mii_bus *bus)
168 {
169         return 0;
170 }
171
172 static irqreturn_t orion_mdio_err_irq(int irq, void *dev_id)
173 {
174         struct orion_mdio_dev *dev = dev_id;
175
176         if (readl(dev->regs + MVMDIO_ERR_INT_CAUSE) &
177                         MVMDIO_ERR_INT_SMI_DONE) {
178                 writel(~MVMDIO_ERR_INT_SMI_DONE,
179                                 dev->regs + MVMDIO_ERR_INT_CAUSE);
180                 wake_up(&dev->smi_busy_wait);
181                 return IRQ_HANDLED;
182         }
183
184         return IRQ_NONE;
185 }
186
187 static int orion_mdio_probe(struct platform_device *pdev)
188 {
189         struct resource *r;
190         struct mii_bus *bus;
191         struct orion_mdio_dev *dev;
192         int i, ret;
193
194         r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
195         if (!r) {
196                 dev_err(&pdev->dev, "No SMI register address given\n");
197                 return -ENODEV;
198         }
199
200         bus = mdiobus_alloc_size(sizeof(struct orion_mdio_dev));
201         if (!bus) {
202                 dev_err(&pdev->dev, "Cannot allocate MDIO bus\n");
203                 return -ENOMEM;
204         }
205
206         bus->name = "orion_mdio_bus";
207         bus->read = orion_mdio_read;
208         bus->write = orion_mdio_write;
209         bus->reset = orion_mdio_reset;
210         snprintf(bus->id, MII_BUS_ID_SIZE, "%s-mii",
211                  dev_name(&pdev->dev));
212         bus->parent = &pdev->dev;
213
214         bus->irq = kmalloc(sizeof(int) * PHY_MAX_ADDR, GFP_KERNEL);
215         if (!bus->irq) {
216                 mdiobus_free(bus);
217                 return -ENOMEM;
218         }
219
220         for (i = 0; i < PHY_MAX_ADDR; i++)
221                 bus->irq[i] = PHY_POLL;
222
223         dev = bus->priv;
224         dev->regs = devm_ioremap(&pdev->dev, r->start, resource_size(r));
225         if (!dev->regs) {
226                 dev_err(&pdev->dev, "Unable to remap SMI register\n");
227                 ret = -ENODEV;
228                 goto out_mdio;
229         }
230
231         init_waitqueue_head(&dev->smi_busy_wait);
232
233         dev->err_interrupt = platform_get_irq(pdev, 0);
234         if (dev->err_interrupt != -ENXIO) {
235                 ret = devm_request_irq(&pdev->dev, dev->err_interrupt,
236                                         orion_mdio_err_irq,
237                                         IRQF_SHARED, pdev->name, dev);
238                 if (ret)
239                         goto out_mdio;
240
241                 writel(MVMDIO_ERR_INT_SMI_DONE,
242                         dev->regs + MVMDIO_ERR_INT_MASK);
243         }
244
245         mutex_init(&dev->lock);
246
247         if (pdev->dev.of_node)
248                 ret = of_mdiobus_register(bus, pdev->dev.of_node);
249         else
250                 ret = mdiobus_register(bus);
251         if (ret < 0) {
252                 dev_err(&pdev->dev, "Cannot register MDIO bus (%d)\n", ret);
253                 goto out_mdio;
254         }
255
256         platform_set_drvdata(pdev, bus);
257
258         return 0;
259
260 out_mdio:
261         kfree(bus->irq);
262         mdiobus_free(bus);
263         return ret;
264 }
265
266 static int orion_mdio_remove(struct platform_device *pdev)
267 {
268         struct mii_bus *bus = platform_get_drvdata(pdev);
269         struct orion_mdio_dev *dev = bus->priv;
270
271         writel(0, dev->regs + MVMDIO_ERR_INT_MASK);
272         mdiobus_unregister(bus);
273         kfree(bus->irq);
274         mdiobus_free(bus);
275         return 0;
276 }
277
278 static const struct of_device_id orion_mdio_match[] = {
279         { .compatible = "marvell,orion-mdio" },
280         { }
281 };
282 MODULE_DEVICE_TABLE(of, orion_mdio_match);
283
284 static struct platform_driver orion_mdio_driver = {
285         .probe = orion_mdio_probe,
286         .remove = orion_mdio_remove,
287         .driver = {
288                 .name = "orion-mdio",
289                 .of_match_table = orion_mdio_match,
290         },
291 };
292
293 module_platform_driver(orion_mdio_driver);
294
295 MODULE_DESCRIPTION("Marvell MDIO interface driver");
296 MODULE_AUTHOR("Thomas Petazzoni <thomas.petazzoni@free-electrons.com>");
297 MODULE_LICENSE("GPL");
298 MODULE_ALIAS("platform:orion-mdio");