1 /*************************************************************************
2 * myri10ge.c: Myricom Myri-10G Ethernet driver.
4 * Copyright (C) 2005 - 2011 Myricom, Inc.
7 * Redistribution and use in source and binary forms, with or without
8 * modification, are permitted provided that the following conditions
10 * 1. Redistributions of source code must retain the above copyright
11 * notice, this list of conditions and the following disclaimer.
12 * 2. Redistributions in binary form must reproduce the above copyright
13 * notice, this list of conditions and the following disclaimer in the
14 * documentation and/or other materials provided with the distribution.
15 * 3. Neither the name of Myricom, Inc. nor the names of its contributors
16 * may be used to endorse or promote products derived from this software
17 * without specific prior written permission.
19 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
20 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
21 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
22 * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
23 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
24 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
25 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
26 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
27 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
28 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
29 * POSSIBILITY OF SUCH DAMAGE.
32 * If the eeprom on your board is not recent enough, you will need to get a
33 * newer firmware image at:
34 * http://www.myri.com/scs/download-Myri10GE.html
36 * Contact Information:
38 * Myricom, Inc., 325N Santa Anita Avenue, Arcadia, CA 91006
39 *************************************************************************/
41 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
43 #include <linux/tcp.h>
44 #include <linux/netdevice.h>
45 #include <linux/skbuff.h>
46 #include <linux/string.h>
47 #include <linux/module.h>
48 #include <linux/pci.h>
49 #include <linux/dma-mapping.h>
50 #include <linux/etherdevice.h>
51 #include <linux/if_ether.h>
52 #include <linux/if_vlan.h>
53 #include <linux/dca.h>
55 #include <linux/inet.h>
57 #include <linux/ethtool.h>
58 #include <linux/firmware.h>
59 #include <linux/delay.h>
60 #include <linux/timer.h>
61 #include <linux/vmalloc.h>
62 #include <linux/crc32.h>
63 #include <linux/moduleparam.h>
65 #include <linux/log2.h>
66 #include <linux/slab.h>
67 #include <linux/prefetch.h>
68 #include <net/checksum.h>
71 #include <asm/byteorder.h>
73 #include <asm/processor.h>
78 #include "myri10ge_mcp.h"
79 #include "myri10ge_mcp_gen_header.h"
81 #define MYRI10GE_VERSION_STR "1.5.3-1.534"
83 MODULE_DESCRIPTION("Myricom 10G driver (10GbE)");
84 MODULE_AUTHOR("Maintainer: help@myri.com");
85 MODULE_VERSION(MYRI10GE_VERSION_STR);
86 MODULE_LICENSE("Dual BSD/GPL");
88 #define MYRI10GE_MAX_ETHER_MTU 9014
90 #define MYRI10GE_ETH_STOPPED 0
91 #define MYRI10GE_ETH_STOPPING 1
92 #define MYRI10GE_ETH_STARTING 2
93 #define MYRI10GE_ETH_RUNNING 3
94 #define MYRI10GE_ETH_OPEN_FAILED 4
96 #define MYRI10GE_EEPROM_STRINGS_SIZE 256
97 #define MYRI10GE_MAX_SEND_DESC_TSO ((65536 / 2048) * 2)
99 #define MYRI10GE_NO_CONFIRM_DATA htonl(0xffffffff)
100 #define MYRI10GE_NO_RESPONSE_RESULT 0xffffffff
102 #define MYRI10GE_ALLOC_ORDER 0
103 #define MYRI10GE_ALLOC_SIZE ((1 << MYRI10GE_ALLOC_ORDER) * PAGE_SIZE)
104 #define MYRI10GE_MAX_FRAGS_PER_FRAME (MYRI10GE_MAX_ETHER_MTU/MYRI10GE_ALLOC_SIZE + 1)
106 #define MYRI10GE_MAX_SLICES 32
108 struct myri10ge_rx_buffer_state {
111 DEFINE_DMA_UNMAP_ADDR(bus);
112 DEFINE_DMA_UNMAP_LEN(len);
115 struct myri10ge_tx_buffer_state {
118 DEFINE_DMA_UNMAP_ADDR(bus);
119 DEFINE_DMA_UNMAP_LEN(len);
122 struct myri10ge_cmd {
128 struct myri10ge_rx_buf {
129 struct mcp_kreq_ether_recv __iomem *lanai; /* lanai ptr for recv ring */
130 struct mcp_kreq_ether_recv *shadow; /* host shadow of recv ring */
131 struct myri10ge_rx_buffer_state *info;
138 int mask; /* number of rx slots -1 */
142 struct myri10ge_tx_buf {
143 struct mcp_kreq_ether_send __iomem *lanai; /* lanai ptr for sendq */
144 __be32 __iomem *send_go; /* "go" doorbell ptr */
145 __be32 __iomem *send_stop; /* "stop" doorbell ptr */
146 struct mcp_kreq_ether_send *req_list; /* host shadow of sendq */
148 struct myri10ge_tx_buffer_state *info;
149 int mask; /* number of transmit slots -1 */
150 int req ____cacheline_aligned; /* transmit slots submitted */
151 int pkt_start; /* packets started */
154 int done ____cacheline_aligned; /* transmit slots completed */
155 int pkt_done; /* packets completed */
160 struct myri10ge_rx_done {
161 struct mcp_slot *entry;
167 struct myri10ge_slice_netstats {
168 unsigned long rx_packets;
169 unsigned long tx_packets;
170 unsigned long rx_bytes;
171 unsigned long tx_bytes;
172 unsigned long rx_dropped;
173 unsigned long tx_dropped;
176 struct myri10ge_slice_state {
177 struct myri10ge_tx_buf tx; /* transmit ring */
178 struct myri10ge_rx_buf rx_small;
179 struct myri10ge_rx_buf rx_big;
180 struct myri10ge_rx_done rx_done;
181 struct net_device *dev;
182 struct napi_struct napi;
183 struct myri10ge_priv *mgp;
184 struct myri10ge_slice_netstats stats;
185 __be32 __iomem *irq_claim;
186 struct mcp_irq_data *fw_stats;
187 dma_addr_t fw_stats_bus;
188 int watchdog_tx_done;
190 int watchdog_rx_done;
192 #ifdef CONFIG_MYRI10GE_DCA
195 __be32 __iomem *dca_tag;
200 struct myri10ge_priv {
201 struct myri10ge_slice_state *ss;
202 int tx_boundary; /* boundary transmits cannot cross */
204 int running; /* running? */
208 struct net_device *dev;
211 unsigned long board_span;
212 unsigned long iomem_base;
213 __be32 __iomem *irq_deassert;
214 char *mac_addr_string;
215 struct mcp_cmd_response *cmd;
217 struct pci_dev *pdev;
220 struct msix_entry *msix_vectors;
221 #ifdef CONFIG_MYRI10GE_DCA
226 unsigned int rdma_tags_available;
228 __be32 __iomem *intr_coal_delay_ptr;
232 wait_queue_head_t down_wq;
233 struct work_struct watchdog_work;
234 struct timer_list watchdog_timer;
238 bool fw_name_allocated;
240 char eeprom_strings[MYRI10GE_EEPROM_STRINGS_SIZE];
241 char *product_code_string;
242 char fw_version[128];
246 int adopted_rx_filter_bug;
247 u8 mac_addr[6]; /* eeprom mac address */
248 unsigned long serial_number;
249 int vendor_specific_offset;
250 int fw_multicast_support;
258 unsigned int board_number;
262 static char *myri10ge_fw_unaligned = "myri10ge_ethp_z8e.dat";
263 static char *myri10ge_fw_aligned = "myri10ge_eth_z8e.dat";
264 static char *myri10ge_fw_rss_unaligned = "myri10ge_rss_ethp_z8e.dat";
265 static char *myri10ge_fw_rss_aligned = "myri10ge_rss_eth_z8e.dat";
266 MODULE_FIRMWARE("myri10ge_ethp_z8e.dat");
267 MODULE_FIRMWARE("myri10ge_eth_z8e.dat");
268 MODULE_FIRMWARE("myri10ge_rss_ethp_z8e.dat");
269 MODULE_FIRMWARE("myri10ge_rss_eth_z8e.dat");
271 /* Careful: must be accessed under kparam_block_sysfs_write */
272 static char *myri10ge_fw_name = NULL;
273 module_param(myri10ge_fw_name, charp, S_IRUGO | S_IWUSR);
274 MODULE_PARM_DESC(myri10ge_fw_name, "Firmware image name");
276 #define MYRI10GE_MAX_BOARDS 8
277 static char *myri10ge_fw_names[MYRI10GE_MAX_BOARDS] =
278 {[0 ... (MYRI10GE_MAX_BOARDS - 1)] = NULL };
279 module_param_array_named(myri10ge_fw_names, myri10ge_fw_names, charp, NULL,
281 MODULE_PARM_DESC(myri10ge_fw_name, "Firmware image names per board");
283 static int myri10ge_ecrc_enable = 1;
284 module_param(myri10ge_ecrc_enable, int, S_IRUGO);
285 MODULE_PARM_DESC(myri10ge_ecrc_enable, "Enable Extended CRC on PCI-E");
287 static int myri10ge_small_bytes = -1; /* -1 == auto */
288 module_param(myri10ge_small_bytes, int, S_IRUGO | S_IWUSR);
289 MODULE_PARM_DESC(myri10ge_small_bytes, "Threshold of small packets");
291 static int myri10ge_msi = 1; /* enable msi by default */
292 module_param(myri10ge_msi, int, S_IRUGO | S_IWUSR);
293 MODULE_PARM_DESC(myri10ge_msi, "Enable Message Signalled Interrupts");
295 static int myri10ge_intr_coal_delay = 75;
296 module_param(myri10ge_intr_coal_delay, int, S_IRUGO);
297 MODULE_PARM_DESC(myri10ge_intr_coal_delay, "Interrupt coalescing delay");
299 static int myri10ge_flow_control = 1;
300 module_param(myri10ge_flow_control, int, S_IRUGO);
301 MODULE_PARM_DESC(myri10ge_flow_control, "Pause parameter");
303 static int myri10ge_deassert_wait = 1;
304 module_param(myri10ge_deassert_wait, int, S_IRUGO | S_IWUSR);
305 MODULE_PARM_DESC(myri10ge_deassert_wait,
306 "Wait when deasserting legacy interrupts");
308 static int myri10ge_force_firmware = 0;
309 module_param(myri10ge_force_firmware, int, S_IRUGO);
310 MODULE_PARM_DESC(myri10ge_force_firmware,
311 "Force firmware to assume aligned completions");
313 static int myri10ge_initial_mtu = MYRI10GE_MAX_ETHER_MTU - ETH_HLEN;
314 module_param(myri10ge_initial_mtu, int, S_IRUGO);
315 MODULE_PARM_DESC(myri10ge_initial_mtu, "Initial MTU");
317 static int myri10ge_napi_weight = 64;
318 module_param(myri10ge_napi_weight, int, S_IRUGO);
319 MODULE_PARM_DESC(myri10ge_napi_weight, "Set NAPI weight");
321 static int myri10ge_watchdog_timeout = 1;
322 module_param(myri10ge_watchdog_timeout, int, S_IRUGO);
323 MODULE_PARM_DESC(myri10ge_watchdog_timeout, "Set watchdog timeout");
325 static int myri10ge_max_irq_loops = 1048576;
326 module_param(myri10ge_max_irq_loops, int, S_IRUGO);
327 MODULE_PARM_DESC(myri10ge_max_irq_loops,
328 "Set stuck legacy IRQ detection threshold");
330 #define MYRI10GE_MSG_DEFAULT NETIF_MSG_LINK
332 static int myri10ge_debug = -1; /* defaults above */
333 module_param(myri10ge_debug, int, 0);
334 MODULE_PARM_DESC(myri10ge_debug, "Debug level (0=none,...,16=all)");
336 static int myri10ge_fill_thresh = 256;
337 module_param(myri10ge_fill_thresh, int, S_IRUGO | S_IWUSR);
338 MODULE_PARM_DESC(myri10ge_fill_thresh, "Number of empty rx slots allowed");
340 static int myri10ge_reset_recover = 1;
342 static int myri10ge_max_slices = 1;
343 module_param(myri10ge_max_slices, int, S_IRUGO);
344 MODULE_PARM_DESC(myri10ge_max_slices, "Max tx/rx queues");
346 static int myri10ge_rss_hash = MXGEFW_RSS_HASH_TYPE_SRC_DST_PORT;
347 module_param(myri10ge_rss_hash, int, S_IRUGO);
348 MODULE_PARM_DESC(myri10ge_rss_hash, "Type of RSS hashing to do");
350 static int myri10ge_dca = 1;
351 module_param(myri10ge_dca, int, S_IRUGO);
352 MODULE_PARM_DESC(myri10ge_dca, "Enable DCA if possible");
354 #define MYRI10GE_FW_OFFSET 1024*1024
355 #define MYRI10GE_HIGHPART_TO_U32(X) \
356 (sizeof (X) == 8) ? ((u32)((u64)(X) >> 32)) : (0)
357 #define MYRI10GE_LOWPART_TO_U32(X) ((u32)(X))
359 #define myri10ge_pio_copy(to,from,size) __iowrite64_copy(to,from,size/8)
361 static void myri10ge_set_multicast_list(struct net_device *dev);
362 static netdev_tx_t myri10ge_sw_tso(struct sk_buff *skb,
363 struct net_device *dev);
365 static inline void put_be32(__be32 val, __be32 __iomem * p)
367 __raw_writel((__force __u32) val, (__force void __iomem *)p);
370 static struct rtnl_link_stats64 *myri10ge_get_stats(struct net_device *dev,
371 struct rtnl_link_stats64 *stats);
373 static void set_fw_name(struct myri10ge_priv *mgp, char *name, bool allocated)
375 if (mgp->fw_name_allocated)
378 mgp->fw_name_allocated = allocated;
382 myri10ge_send_cmd(struct myri10ge_priv *mgp, u32 cmd,
383 struct myri10ge_cmd *data, int atomic)
386 char buf_bytes[sizeof(*buf) + 8];
387 struct mcp_cmd_response *response = mgp->cmd;
388 char __iomem *cmd_addr = mgp->sram + MXGEFW_ETH_CMD;
389 u32 dma_low, dma_high, result, value;
392 /* ensure buf is aligned to 8 bytes */
393 buf = (struct mcp_cmd *)ALIGN((unsigned long)buf_bytes, 8);
395 buf->data0 = htonl(data->data0);
396 buf->data1 = htonl(data->data1);
397 buf->data2 = htonl(data->data2);
398 buf->cmd = htonl(cmd);
399 dma_low = MYRI10GE_LOWPART_TO_U32(mgp->cmd_bus);
400 dma_high = MYRI10GE_HIGHPART_TO_U32(mgp->cmd_bus);
402 buf->response_addr.low = htonl(dma_low);
403 buf->response_addr.high = htonl(dma_high);
404 response->result = htonl(MYRI10GE_NO_RESPONSE_RESULT);
406 myri10ge_pio_copy(cmd_addr, buf, sizeof(*buf));
408 /* wait up to 15ms. Longest command is the DMA benchmark,
409 * which is capped at 5ms, but runs from a timeout handler
410 * that runs every 7.8ms. So a 15ms timeout leaves us with
414 /* if atomic is set, do not sleep,
415 * and try to get the completion quickly
416 * (1ms will be enough for those commands) */
417 for (sleep_total = 0;
418 sleep_total < 1000 &&
419 response->result == htonl(MYRI10GE_NO_RESPONSE_RESULT);
425 /* use msleep for most command */
426 for (sleep_total = 0;
428 response->result == htonl(MYRI10GE_NO_RESPONSE_RESULT);
433 result = ntohl(response->result);
434 value = ntohl(response->data);
435 if (result != MYRI10GE_NO_RESPONSE_RESULT) {
439 } else if (result == MXGEFW_CMD_UNKNOWN) {
441 } else if (result == MXGEFW_CMD_ERROR_UNALIGNED) {
443 } else if (result == MXGEFW_CMD_ERROR_RANGE &&
444 cmd == MXGEFW_CMD_ENABLE_RSS_QUEUES &&
446 data1 & MXGEFW_SLICE_ENABLE_MULTIPLE_TX_QUEUES) !=
450 dev_err(&mgp->pdev->dev,
451 "command %d failed, result = %d\n",
457 dev_err(&mgp->pdev->dev, "command %d timed out, result = %d\n",
463 * The eeprom strings on the lanaiX have the format
466 * PT:ddd mmm xx xx:xx:xx xx\0
467 * PV:ddd mmm xx xx:xx:xx xx\0
469 static int myri10ge_read_mac_addr(struct myri10ge_priv *mgp)
474 ptr = mgp->eeprom_strings;
475 limit = mgp->eeprom_strings + MYRI10GE_EEPROM_STRINGS_SIZE;
477 while (*ptr != '\0' && ptr < limit) {
478 if (memcmp(ptr, "MAC=", 4) == 0) {
480 mgp->mac_addr_string = ptr;
481 for (i = 0; i < 6; i++) {
482 if ((ptr + 2) > limit)
485 simple_strtoul(ptr, &ptr, 16);
489 if (memcmp(ptr, "PC=", 3) == 0) {
491 mgp->product_code_string = ptr;
493 if (memcmp((const void *)ptr, "SN=", 3) == 0) {
495 mgp->serial_number = simple_strtoul(ptr, &ptr, 10);
497 while (ptr < limit && *ptr++) ;
503 dev_err(&mgp->pdev->dev, "failed to parse eeprom_strings\n");
508 * Enable or disable periodic RDMAs from the host to make certain
509 * chipsets resend dropped PCIe messages
512 static void myri10ge_dummy_rdma(struct myri10ge_priv *mgp, int enable)
514 char __iomem *submit;
515 __be32 buf[16] __attribute__ ((__aligned__(8)));
516 u32 dma_low, dma_high;
519 /* clear confirmation addr */
523 /* send a rdma command to the PCIe engine, and wait for the
524 * response in the confirmation address. The firmware should
525 * write a -1 there to indicate it is alive and well
527 dma_low = MYRI10GE_LOWPART_TO_U32(mgp->cmd_bus);
528 dma_high = MYRI10GE_HIGHPART_TO_U32(mgp->cmd_bus);
530 buf[0] = htonl(dma_high); /* confirm addr MSW */
531 buf[1] = htonl(dma_low); /* confirm addr LSW */
532 buf[2] = MYRI10GE_NO_CONFIRM_DATA; /* confirm data */
533 buf[3] = htonl(dma_high); /* dummy addr MSW */
534 buf[4] = htonl(dma_low); /* dummy addr LSW */
535 buf[5] = htonl(enable); /* enable? */
537 submit = mgp->sram + MXGEFW_BOOT_DUMMY_RDMA;
539 myri10ge_pio_copy(submit, &buf, sizeof(buf));
540 for (i = 0; mgp->cmd->data != MYRI10GE_NO_CONFIRM_DATA && i < 20; i++)
542 if (mgp->cmd->data != MYRI10GE_NO_CONFIRM_DATA)
543 dev_err(&mgp->pdev->dev, "dummy rdma %s failed\n",
544 (enable ? "enable" : "disable"));
548 myri10ge_validate_firmware(struct myri10ge_priv *mgp,
549 struct mcp_gen_header *hdr)
551 struct device *dev = &mgp->pdev->dev;
553 /* check firmware type */
554 if (ntohl(hdr->mcp_type) != MCP_TYPE_ETH) {
555 dev_err(dev, "Bad firmware type: 0x%x\n", ntohl(hdr->mcp_type));
559 /* save firmware version for ethtool */
560 strncpy(mgp->fw_version, hdr->version, sizeof(mgp->fw_version));
562 sscanf(mgp->fw_version, "%d.%d.%d", &mgp->fw_ver_major,
563 &mgp->fw_ver_minor, &mgp->fw_ver_tiny);
565 if (!(mgp->fw_ver_major == MXGEFW_VERSION_MAJOR &&
566 mgp->fw_ver_minor == MXGEFW_VERSION_MINOR)) {
567 dev_err(dev, "Found firmware version %s\n", mgp->fw_version);
568 dev_err(dev, "Driver needs %d.%d\n", MXGEFW_VERSION_MAJOR,
569 MXGEFW_VERSION_MINOR);
575 static int myri10ge_load_hotplug_firmware(struct myri10ge_priv *mgp, u32 * size)
577 unsigned crc, reread_crc;
578 const struct firmware *fw;
579 struct device *dev = &mgp->pdev->dev;
580 unsigned char *fw_readback;
581 struct mcp_gen_header *hdr;
586 if ((status = request_firmware(&fw, mgp->fw_name, dev)) < 0) {
587 dev_err(dev, "Unable to load %s firmware image via hotplug\n",
590 goto abort_with_nothing;
595 if (fw->size >= mgp->sram_size - MYRI10GE_FW_OFFSET ||
596 fw->size < MCP_HEADER_PTR_OFFSET + 4) {
597 dev_err(dev, "Firmware size invalid:%d\n", (int)fw->size);
603 hdr_offset = ntohl(*(__be32 *) (fw->data + MCP_HEADER_PTR_OFFSET));
604 if ((hdr_offset & 3) || hdr_offset + sizeof(*hdr) > fw->size) {
605 dev_err(dev, "Bad firmware file\n");
609 hdr = (void *)(fw->data + hdr_offset);
611 status = myri10ge_validate_firmware(mgp, hdr);
615 crc = crc32(~0, fw->data, fw->size);
616 for (i = 0; i < fw->size; i += 256) {
617 myri10ge_pio_copy(mgp->sram + MYRI10GE_FW_OFFSET + i,
619 min(256U, (unsigned)(fw->size - i)));
623 fw_readback = vmalloc(fw->size);
628 /* corruption checking is good for parity recovery and buggy chipset */
629 memcpy_fromio(fw_readback, mgp->sram + MYRI10GE_FW_OFFSET, fw->size);
630 reread_crc = crc32(~0, fw_readback, fw->size);
632 if (crc != reread_crc) {
633 dev_err(dev, "CRC failed(fw-len=%u), got 0x%x (expect 0x%x)\n",
634 (unsigned)fw->size, reread_crc, crc);
638 *size = (u32) fw->size;
641 release_firmware(fw);
647 static int myri10ge_adopt_running_firmware(struct myri10ge_priv *mgp)
649 struct mcp_gen_header *hdr;
650 struct device *dev = &mgp->pdev->dev;
651 const size_t bytes = sizeof(struct mcp_gen_header);
655 /* find running firmware header */
656 hdr_offset = swab32(readl(mgp->sram + MCP_HEADER_PTR_OFFSET));
658 if ((hdr_offset & 3) || hdr_offset + sizeof(*hdr) > mgp->sram_size) {
659 dev_err(dev, "Running firmware has bad header offset (%d)\n",
664 /* copy header of running firmware from SRAM to host memory to
665 * validate firmware */
666 hdr = kmalloc(bytes, GFP_KERNEL);
670 memcpy_fromio(hdr, mgp->sram + hdr_offset, bytes);
671 status = myri10ge_validate_firmware(mgp, hdr);
674 /* check to see if adopted firmware has bug where adopting
675 * it will cause broadcasts to be filtered unless the NIC
676 * is kept in ALLMULTI mode */
677 if (mgp->fw_ver_major == 1 && mgp->fw_ver_minor == 4 &&
678 mgp->fw_ver_tiny >= 4 && mgp->fw_ver_tiny <= 11) {
679 mgp->adopted_rx_filter_bug = 1;
680 dev_warn(dev, "Adopting fw %d.%d.%d: "
681 "working around rx filter bug\n",
682 mgp->fw_ver_major, mgp->fw_ver_minor,
688 static int myri10ge_get_firmware_capabilities(struct myri10ge_priv *mgp)
690 struct myri10ge_cmd cmd;
693 /* probe for IPv6 TSO support */
694 mgp->features = NETIF_F_SG | NETIF_F_HW_CSUM | NETIF_F_TSO;
695 status = myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_MAX_TSO6_HDR_SIZE,
698 mgp->max_tso6 = cmd.data0;
699 mgp->features |= NETIF_F_TSO6;
702 status = myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_RX_RING_SIZE, &cmd, 0);
704 dev_err(&mgp->pdev->dev,
705 "failed MXGEFW_CMD_GET_RX_RING_SIZE\n");
709 mgp->max_intr_slots = 2 * (cmd.data0 / sizeof(struct mcp_dma_addr));
714 static int myri10ge_load_firmware(struct myri10ge_priv *mgp, int adopt)
716 char __iomem *submit;
717 __be32 buf[16] __attribute__ ((__aligned__(8)));
718 u32 dma_low, dma_high, size;
722 status = myri10ge_load_hotplug_firmware(mgp, &size);
726 dev_warn(&mgp->pdev->dev, "hotplug firmware loading failed\n");
728 /* Do not attempt to adopt firmware if there
733 status = myri10ge_adopt_running_firmware(mgp);
735 dev_err(&mgp->pdev->dev,
736 "failed to adopt running firmware\n");
739 dev_info(&mgp->pdev->dev,
740 "Successfully adopted running firmware\n");
741 if (mgp->tx_boundary == 4096) {
742 dev_warn(&mgp->pdev->dev,
743 "Using firmware currently running on NIC"
745 dev_warn(&mgp->pdev->dev,
746 "performance consider loading optimized "
748 dev_warn(&mgp->pdev->dev, "via hotplug\n");
751 set_fw_name(mgp, "adopted", false);
752 mgp->tx_boundary = 2048;
753 myri10ge_dummy_rdma(mgp, 1);
754 status = myri10ge_get_firmware_capabilities(mgp);
758 /* clear confirmation addr */
762 /* send a reload command to the bootstrap MCP, and wait for the
763 * response in the confirmation address. The firmware should
764 * write a -1 there to indicate it is alive and well
766 dma_low = MYRI10GE_LOWPART_TO_U32(mgp->cmd_bus);
767 dma_high = MYRI10GE_HIGHPART_TO_U32(mgp->cmd_bus);
769 buf[0] = htonl(dma_high); /* confirm addr MSW */
770 buf[1] = htonl(dma_low); /* confirm addr LSW */
771 buf[2] = MYRI10GE_NO_CONFIRM_DATA; /* confirm data */
773 /* FIX: All newest firmware should un-protect the bottom of
774 * the sram before handoff. However, the very first interfaces
775 * do not. Therefore the handoff copy must skip the first 8 bytes
777 buf[3] = htonl(MYRI10GE_FW_OFFSET + 8); /* where the code starts */
778 buf[4] = htonl(size - 8); /* length of code */
779 buf[5] = htonl(8); /* where to copy to */
780 buf[6] = htonl(0); /* where to jump to */
782 submit = mgp->sram + MXGEFW_BOOT_HANDOFF;
784 myri10ge_pio_copy(submit, &buf, sizeof(buf));
789 while (mgp->cmd->data != MYRI10GE_NO_CONFIRM_DATA && i < 9) {
793 if (mgp->cmd->data != MYRI10GE_NO_CONFIRM_DATA) {
794 dev_err(&mgp->pdev->dev, "handoff failed\n");
797 myri10ge_dummy_rdma(mgp, 1);
798 status = myri10ge_get_firmware_capabilities(mgp);
803 static int myri10ge_update_mac_address(struct myri10ge_priv *mgp, u8 * addr)
805 struct myri10ge_cmd cmd;
808 cmd.data0 = ((addr[0] << 24) | (addr[1] << 16)
809 | (addr[2] << 8) | addr[3]);
811 cmd.data1 = ((addr[4] << 8) | (addr[5]));
813 status = myri10ge_send_cmd(mgp, MXGEFW_SET_MAC_ADDRESS, &cmd, 0);
817 static int myri10ge_change_pause(struct myri10ge_priv *mgp, int pause)
819 struct myri10ge_cmd cmd;
822 ctl = pause ? MXGEFW_ENABLE_FLOW_CONTROL : MXGEFW_DISABLE_FLOW_CONTROL;
823 status = myri10ge_send_cmd(mgp, ctl, &cmd, 0);
826 netdev_err(mgp->dev, "Failed to set flow control mode\n");
834 myri10ge_change_promisc(struct myri10ge_priv *mgp, int promisc, int atomic)
836 struct myri10ge_cmd cmd;
839 ctl = promisc ? MXGEFW_ENABLE_PROMISC : MXGEFW_DISABLE_PROMISC;
840 status = myri10ge_send_cmd(mgp, ctl, &cmd, atomic);
842 netdev_err(mgp->dev, "Failed to set promisc mode\n");
845 static int myri10ge_dma_test(struct myri10ge_priv *mgp, int test_type)
847 struct myri10ge_cmd cmd;
850 struct page *dmatest_page;
851 dma_addr_t dmatest_bus;
854 dmatest_page = alloc_page(GFP_KERNEL);
857 dmatest_bus = pci_map_page(mgp->pdev, dmatest_page, 0, PAGE_SIZE,
860 /* Run a small DMA test.
861 * The magic multipliers to the length tell the firmware
862 * to do DMA read, write, or read+write tests. The
863 * results are returned in cmd.data0. The upper 16
864 * bits or the return is the number of transfers completed.
865 * The lower 16 bits is the time in 0.5us ticks that the
866 * transfers took to complete.
869 len = mgp->tx_boundary;
871 cmd.data0 = MYRI10GE_LOWPART_TO_U32(dmatest_bus);
872 cmd.data1 = MYRI10GE_HIGHPART_TO_U32(dmatest_bus);
873 cmd.data2 = len * 0x10000;
874 status = myri10ge_send_cmd(mgp, test_type, &cmd, 0);
879 mgp->read_dma = ((cmd.data0 >> 16) * len * 2) / (cmd.data0 & 0xffff);
880 cmd.data0 = MYRI10GE_LOWPART_TO_U32(dmatest_bus);
881 cmd.data1 = MYRI10GE_HIGHPART_TO_U32(dmatest_bus);
882 cmd.data2 = len * 0x1;
883 status = myri10ge_send_cmd(mgp, test_type, &cmd, 0);
888 mgp->write_dma = ((cmd.data0 >> 16) * len * 2) / (cmd.data0 & 0xffff);
890 cmd.data0 = MYRI10GE_LOWPART_TO_U32(dmatest_bus);
891 cmd.data1 = MYRI10GE_HIGHPART_TO_U32(dmatest_bus);
892 cmd.data2 = len * 0x10001;
893 status = myri10ge_send_cmd(mgp, test_type, &cmd, 0);
898 mgp->read_write_dma = ((cmd.data0 >> 16) * len * 2 * 2) /
899 (cmd.data0 & 0xffff);
902 pci_unmap_page(mgp->pdev, dmatest_bus, PAGE_SIZE, DMA_BIDIRECTIONAL);
903 put_page(dmatest_page);
905 if (status != 0 && test_type != MXGEFW_CMD_UNALIGNED_TEST)
906 dev_warn(&mgp->pdev->dev, "DMA %s benchmark failed: %d\n",
912 static int myri10ge_reset(struct myri10ge_priv *mgp)
914 struct myri10ge_cmd cmd;
915 struct myri10ge_slice_state *ss;
918 #ifdef CONFIG_MYRI10GE_DCA
919 unsigned long dca_tag_off;
922 /* try to send a reset command to the card to see if it
924 memset(&cmd, 0, sizeof(cmd));
925 status = myri10ge_send_cmd(mgp, MXGEFW_CMD_RESET, &cmd, 0);
927 dev_err(&mgp->pdev->dev, "failed reset\n");
931 (void)myri10ge_dma_test(mgp, MXGEFW_DMA_TEST);
933 * Use non-ndis mcp_slot (eg, 4 bytes total,
934 * no toeplitz hash value returned. Older firmware will
935 * not understand this command, but will use the correct
936 * sized mcp_slot, so we ignore error returns
938 cmd.data0 = MXGEFW_RSS_MCP_SLOT_TYPE_MIN;
939 (void)myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_RSS_MCP_SLOT_TYPE, &cmd, 0);
941 /* Now exchange information about interrupts */
943 bytes = mgp->max_intr_slots * sizeof(*mgp->ss[0].rx_done.entry);
944 cmd.data0 = (u32) bytes;
945 status = myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_INTRQ_SIZE, &cmd, 0);
948 * Even though we already know how many slices are supported
949 * via myri10ge_probe_slices() MXGEFW_CMD_GET_MAX_RSS_QUEUES
950 * has magic side effects, and must be called after a reset.
951 * It must be called prior to calling any RSS related cmds,
952 * including assigning an interrupt queue for anything but
953 * slice 0. It must also be called *after*
954 * MXGEFW_CMD_SET_INTRQ_SIZE, since the intrq size is used by
955 * the firmware to compute offsets.
958 if (mgp->num_slices > 1) {
960 /* ask the maximum number of slices it supports */
961 status = myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_MAX_RSS_QUEUES,
964 dev_err(&mgp->pdev->dev,
965 "failed to get number of slices\n");
969 * MXGEFW_CMD_ENABLE_RSS_QUEUES must be called prior
970 * to setting up the interrupt queue DMA
973 cmd.data0 = mgp->num_slices;
974 cmd.data1 = MXGEFW_SLICE_INTR_MODE_ONE_PER_SLICE;
975 if (mgp->dev->real_num_tx_queues > 1)
976 cmd.data1 |= MXGEFW_SLICE_ENABLE_MULTIPLE_TX_QUEUES;
977 status = myri10ge_send_cmd(mgp, MXGEFW_CMD_ENABLE_RSS_QUEUES,
980 /* Firmware older than 1.4.32 only supports multiple
981 * RX queues, so if we get an error, first retry using a
982 * single TX queue before giving up */
983 if (status != 0 && mgp->dev->real_num_tx_queues > 1) {
984 netif_set_real_num_tx_queues(mgp->dev, 1);
985 cmd.data0 = mgp->num_slices;
986 cmd.data1 = MXGEFW_SLICE_INTR_MODE_ONE_PER_SLICE;
987 status = myri10ge_send_cmd(mgp,
988 MXGEFW_CMD_ENABLE_RSS_QUEUES,
993 dev_err(&mgp->pdev->dev,
994 "failed to set number of slices\n");
999 for (i = 0; i < mgp->num_slices; i++) {
1001 cmd.data0 = MYRI10GE_LOWPART_TO_U32(ss->rx_done.bus);
1002 cmd.data1 = MYRI10GE_HIGHPART_TO_U32(ss->rx_done.bus);
1004 status |= myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_INTRQ_DMA,
1009 myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_IRQ_ACK_OFFSET, &cmd, 0);
1010 for (i = 0; i < mgp->num_slices; i++) {
1013 (__iomem __be32 *) (mgp->sram + cmd.data0 + 8 * i);
1015 status |= myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_IRQ_DEASSERT_OFFSET,
1017 mgp->irq_deassert = (__iomem __be32 *) (mgp->sram + cmd.data0);
1019 status |= myri10ge_send_cmd
1020 (mgp, MXGEFW_CMD_GET_INTR_COAL_DELAY_OFFSET, &cmd, 0);
1021 mgp->intr_coal_delay_ptr = (__iomem __be32 *) (mgp->sram + cmd.data0);
1023 dev_err(&mgp->pdev->dev, "failed set interrupt parameters\n");
1026 put_be32(htonl(mgp->intr_coal_delay), mgp->intr_coal_delay_ptr);
1028 #ifdef CONFIG_MYRI10GE_DCA
1029 status = myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_DCA_OFFSET, &cmd, 0);
1030 dca_tag_off = cmd.data0;
1031 for (i = 0; i < mgp->num_slices; i++) {
1034 ss->dca_tag = (__iomem __be32 *)
1035 (mgp->sram + dca_tag_off + 4 * i);
1040 #endif /* CONFIG_MYRI10GE_DCA */
1042 /* reset mcp/driver shared state back to 0 */
1044 mgp->link_changes = 0;
1045 for (i = 0; i < mgp->num_slices; i++) {
1048 memset(ss->rx_done.entry, 0, bytes);
1051 ss->tx.pkt_start = 0;
1052 ss->tx.pkt_done = 0;
1054 ss->rx_small.cnt = 0;
1055 ss->rx_done.idx = 0;
1056 ss->rx_done.cnt = 0;
1057 ss->tx.wake_queue = 0;
1058 ss->tx.stop_queue = 0;
1061 status = myri10ge_update_mac_address(mgp, mgp->dev->dev_addr);
1062 myri10ge_change_pause(mgp, mgp->pause);
1063 myri10ge_set_multicast_list(mgp->dev);
1067 #ifdef CONFIG_MYRI10GE_DCA
1068 static int myri10ge_toggle_relaxed(struct pci_dev *pdev, int on)
1073 pcie_capability_read_word(pdev, PCI_EXP_DEVCTL, &ctl);
1075 ret = (ctl & PCI_EXP_DEVCTL_RELAX_EN) >> 4;
1077 ctl &= ~PCI_EXP_DEVCTL_RELAX_EN;
1079 pcie_capability_write_word(pdev, PCI_EXP_DEVCTL, ctl);
1085 myri10ge_write_dca(struct myri10ge_slice_state *ss, int cpu, int tag)
1087 ss->cached_dca_tag = tag;
1088 put_be32(htonl(tag), ss->dca_tag);
1091 static inline void myri10ge_update_dca(struct myri10ge_slice_state *ss)
1093 int cpu = get_cpu();
1096 if (cpu != ss->cpu) {
1097 tag = dca3_get_tag(&ss->mgp->pdev->dev, cpu);
1098 if (ss->cached_dca_tag != tag)
1099 myri10ge_write_dca(ss, cpu, tag);
1105 static void myri10ge_setup_dca(struct myri10ge_priv *mgp)
1108 struct pci_dev *pdev = mgp->pdev;
1110 if (mgp->ss[0].dca_tag == NULL || mgp->dca_enabled)
1112 if (!myri10ge_dca) {
1113 dev_err(&pdev->dev, "dca disabled by administrator\n");
1116 err = dca_add_requester(&pdev->dev);
1120 "dca_add_requester() failed, err=%d\n", err);
1123 mgp->relaxed_order = myri10ge_toggle_relaxed(pdev, 0);
1124 mgp->dca_enabled = 1;
1125 for (i = 0; i < mgp->num_slices; i++) {
1126 mgp->ss[i].cpu = -1;
1127 mgp->ss[i].cached_dca_tag = -1;
1128 myri10ge_update_dca(&mgp->ss[i]);
1132 static void myri10ge_teardown_dca(struct myri10ge_priv *mgp)
1134 struct pci_dev *pdev = mgp->pdev;
1136 if (!mgp->dca_enabled)
1138 mgp->dca_enabled = 0;
1139 if (mgp->relaxed_order)
1140 myri10ge_toggle_relaxed(pdev, 1);
1141 dca_remove_requester(&pdev->dev);
1144 static int myri10ge_notify_dca_device(struct device *dev, void *data)
1146 struct myri10ge_priv *mgp;
1147 unsigned long event;
1149 mgp = dev_get_drvdata(dev);
1150 event = *(unsigned long *)data;
1152 if (event == DCA_PROVIDER_ADD)
1153 myri10ge_setup_dca(mgp);
1154 else if (event == DCA_PROVIDER_REMOVE)
1155 myri10ge_teardown_dca(mgp);
1158 #endif /* CONFIG_MYRI10GE_DCA */
1161 myri10ge_submit_8rx(struct mcp_kreq_ether_recv __iomem * dst,
1162 struct mcp_kreq_ether_recv *src)
1166 low = src->addr_low;
1167 src->addr_low = htonl(DMA_BIT_MASK(32));
1168 myri10ge_pio_copy(dst, src, 4 * sizeof(*src));
1170 myri10ge_pio_copy(dst + 4, src + 4, 4 * sizeof(*src));
1172 src->addr_low = low;
1173 put_be32(low, &dst->addr_low);
1177 static inline void myri10ge_vlan_ip_csum(struct sk_buff *skb, __wsum hw_csum)
1179 struct vlan_hdr *vh = (struct vlan_hdr *)(skb->data);
1181 if ((skb->protocol == htons(ETH_P_8021Q)) &&
1182 (vh->h_vlan_encapsulated_proto == htons(ETH_P_IP) ||
1183 vh->h_vlan_encapsulated_proto == htons(ETH_P_IPV6))) {
1184 skb->csum = hw_csum;
1185 skb->ip_summed = CHECKSUM_COMPLETE;
1190 myri10ge_alloc_rx_pages(struct myri10ge_priv *mgp, struct myri10ge_rx_buf *rx,
1191 int bytes, int watchdog)
1195 #if MYRI10GE_ALLOC_SIZE > 4096
1199 if (unlikely(rx->watchdog_needed && !watchdog))
1202 /* try to refill entire ring */
1203 while (rx->fill_cnt != (rx->cnt + rx->mask + 1)) {
1204 idx = rx->fill_cnt & rx->mask;
1205 if (rx->page_offset + bytes <= MYRI10GE_ALLOC_SIZE) {
1206 /* we can use part of previous page */
1209 /* we need a new page */
1211 alloc_pages(GFP_ATOMIC | __GFP_COMP,
1212 MYRI10GE_ALLOC_ORDER);
1213 if (unlikely(page == NULL)) {
1214 if (rx->fill_cnt - rx->cnt < 16)
1215 rx->watchdog_needed = 1;
1219 rx->page_offset = 0;
1220 rx->bus = pci_map_page(mgp->pdev, page, 0,
1221 MYRI10GE_ALLOC_SIZE,
1222 PCI_DMA_FROMDEVICE);
1224 rx->info[idx].page = rx->page;
1225 rx->info[idx].page_offset = rx->page_offset;
1226 /* note that this is the address of the start of the
1228 dma_unmap_addr_set(&rx->info[idx], bus, rx->bus);
1229 rx->shadow[idx].addr_low =
1230 htonl(MYRI10GE_LOWPART_TO_U32(rx->bus) + rx->page_offset);
1231 rx->shadow[idx].addr_high =
1232 htonl(MYRI10GE_HIGHPART_TO_U32(rx->bus));
1234 /* start next packet on a cacheline boundary */
1235 rx->page_offset += SKB_DATA_ALIGN(bytes);
1237 #if MYRI10GE_ALLOC_SIZE > 4096
1238 /* don't cross a 4KB boundary */
1239 end_offset = rx->page_offset + bytes - 1;
1240 if ((unsigned)(rx->page_offset ^ end_offset) > 4095)
1241 rx->page_offset = end_offset & ~4095;
1245 /* copy 8 descriptors to the firmware at a time */
1246 if ((idx & 7) == 7) {
1247 myri10ge_submit_8rx(&rx->lanai[idx - 7],
1248 &rx->shadow[idx - 7]);
1254 myri10ge_unmap_rx_page(struct pci_dev *pdev,
1255 struct myri10ge_rx_buffer_state *info, int bytes)
1257 /* unmap the recvd page if we're the only or last user of it */
1258 if (bytes >= MYRI10GE_ALLOC_SIZE / 2 ||
1259 (info->page_offset + 2 * bytes) > MYRI10GE_ALLOC_SIZE) {
1260 pci_unmap_page(pdev, (dma_unmap_addr(info, bus)
1261 & ~(MYRI10GE_ALLOC_SIZE - 1)),
1262 MYRI10GE_ALLOC_SIZE, PCI_DMA_FROMDEVICE);
1267 * GRO does not support acceleration of tagged vlan frames, and
1268 * this NIC does not support vlan tag offload, so we must pop
1269 * the tag ourselves to be able to achieve GRO performance that
1270 * is comparable to LRO.
1274 myri10ge_vlan_rx(struct net_device *dev, void *addr, struct sk_buff *skb)
1277 struct vlan_ethhdr *veh;
1278 struct skb_frag_struct *frag;
1283 veh = (struct vlan_ethhdr *)va;
1284 if ((dev->features & NETIF_F_HW_VLAN_RX) == NETIF_F_HW_VLAN_RX &&
1285 veh->h_vlan_proto == htons(ETH_P_8021Q)) {
1286 /* fixup csum if needed */
1287 if (skb->ip_summed == CHECKSUM_COMPLETE) {
1288 vsum = csum_partial(va + ETH_HLEN, VLAN_HLEN, 0);
1289 skb->csum = csum_sub(skb->csum, vsum);
1292 __vlan_hwaccel_put_tag(skb, ntohs(veh->h_vlan_TCI));
1293 memmove(va + VLAN_HLEN, va, 2 * ETH_ALEN);
1294 skb->len -= VLAN_HLEN;
1295 skb->data_len -= VLAN_HLEN;
1296 frag = skb_shinfo(skb)->frags;
1297 frag->page_offset += VLAN_HLEN;
1298 skb_frag_size_set(frag, skb_frag_size(frag) - VLAN_HLEN);
1303 myri10ge_rx_done(struct myri10ge_slice_state *ss, int len, __wsum csum)
1305 struct myri10ge_priv *mgp = ss->mgp;
1306 struct sk_buff *skb;
1307 struct skb_frag_struct *rx_frags;
1308 struct myri10ge_rx_buf *rx;
1309 int i, idx, remainder, bytes;
1310 struct pci_dev *pdev = mgp->pdev;
1311 struct net_device *dev = mgp->dev;
1314 if (len <= mgp->small_bytes) {
1316 bytes = mgp->small_bytes;
1319 bytes = mgp->big_bytes;
1323 idx = rx->cnt & rx->mask;
1324 va = page_address(rx->info[idx].page) + rx->info[idx].page_offset;
1327 skb = napi_get_frags(&ss->napi);
1328 if (unlikely(skb == NULL)) {
1329 ss->stats.rx_dropped++;
1330 for (i = 0, remainder = len; remainder > 0; i++) {
1331 myri10ge_unmap_rx_page(pdev, &rx->info[idx], bytes);
1332 put_page(rx->info[idx].page);
1334 idx = rx->cnt & rx->mask;
1335 remainder -= MYRI10GE_ALLOC_SIZE;
1339 rx_frags = skb_shinfo(skb)->frags;
1340 /* Fill skb_frag_struct(s) with data from our receive */
1341 for (i = 0, remainder = len; remainder > 0; i++) {
1342 myri10ge_unmap_rx_page(pdev, &rx->info[idx], bytes);
1343 skb_fill_page_desc(skb, i, rx->info[idx].page,
1344 rx->info[idx].page_offset,
1345 remainder < MYRI10GE_ALLOC_SIZE ?
1346 remainder : MYRI10GE_ALLOC_SIZE);
1348 idx = rx->cnt & rx->mask;
1349 remainder -= MYRI10GE_ALLOC_SIZE;
1352 /* remove padding */
1353 rx_frags[0].page_offset += MXGEFW_PAD;
1354 rx_frags[0].size -= MXGEFW_PAD;
1358 skb->data_len = len;
1359 skb->truesize += len;
1360 if (dev->features & NETIF_F_RXCSUM) {
1361 skb->ip_summed = CHECKSUM_COMPLETE;
1364 myri10ge_vlan_rx(mgp->dev, va, skb);
1365 skb_record_rx_queue(skb, ss - &mgp->ss[0]);
1367 napi_gro_frags(&ss->napi);
1372 myri10ge_tx_done(struct myri10ge_slice_state *ss, int mcp_index)
1374 struct pci_dev *pdev = ss->mgp->pdev;
1375 struct myri10ge_tx_buf *tx = &ss->tx;
1376 struct netdev_queue *dev_queue;
1377 struct sk_buff *skb;
1380 while (tx->pkt_done != mcp_index) {
1381 idx = tx->done & tx->mask;
1382 skb = tx->info[idx].skb;
1385 tx->info[idx].skb = NULL;
1386 if (tx->info[idx].last) {
1388 tx->info[idx].last = 0;
1391 len = dma_unmap_len(&tx->info[idx], len);
1392 dma_unmap_len_set(&tx->info[idx], len, 0);
1394 ss->stats.tx_bytes += skb->len;
1395 ss->stats.tx_packets++;
1396 dev_kfree_skb_irq(skb);
1398 pci_unmap_single(pdev,
1399 dma_unmap_addr(&tx->info[idx],
1404 pci_unmap_page(pdev,
1405 dma_unmap_addr(&tx->info[idx],
1411 dev_queue = netdev_get_tx_queue(ss->dev, ss - ss->mgp->ss);
1413 * Make a minimal effort to prevent the NIC from polling an
1414 * idle tx queue. If we can't get the lock we leave the queue
1415 * active. In this case, either a thread was about to start
1416 * using the queue anyway, or we lost a race and the NIC will
1417 * waste some of its resources polling an inactive queue for a
1421 if ((ss->mgp->dev->real_num_tx_queues > 1) &&
1422 __netif_tx_trylock(dev_queue)) {
1423 if (tx->req == tx->done) {
1424 tx->queue_active = 0;
1425 put_be32(htonl(1), tx->send_stop);
1429 __netif_tx_unlock(dev_queue);
1432 /* start the queue if we've stopped it */
1433 if (netif_tx_queue_stopped(dev_queue) &&
1434 tx->req - tx->done < (tx->mask >> 1) &&
1435 ss->mgp->running == MYRI10GE_ETH_RUNNING) {
1437 netif_tx_wake_queue(dev_queue);
1442 myri10ge_clean_rx_done(struct myri10ge_slice_state *ss, int budget)
1444 struct myri10ge_rx_done *rx_done = &ss->rx_done;
1445 struct myri10ge_priv *mgp = ss->mgp;
1446 unsigned long rx_bytes = 0;
1447 unsigned long rx_packets = 0;
1448 unsigned long rx_ok;
1449 int idx = rx_done->idx;
1450 int cnt = rx_done->cnt;
1455 while (rx_done->entry[idx].length != 0 && work_done < budget) {
1456 length = ntohs(rx_done->entry[idx].length);
1457 rx_done->entry[idx].length = 0;
1458 checksum = csum_unfold(rx_done->entry[idx].checksum);
1459 rx_ok = myri10ge_rx_done(ss, length, checksum);
1460 rx_packets += rx_ok;
1461 rx_bytes += rx_ok * (unsigned long)length;
1463 idx = cnt & (mgp->max_intr_slots - 1);
1468 ss->stats.rx_packets += rx_packets;
1469 ss->stats.rx_bytes += rx_bytes;
1471 /* restock receive rings if needed */
1472 if (ss->rx_small.fill_cnt - ss->rx_small.cnt < myri10ge_fill_thresh)
1473 myri10ge_alloc_rx_pages(mgp, &ss->rx_small,
1474 mgp->small_bytes + MXGEFW_PAD, 0);
1475 if (ss->rx_big.fill_cnt - ss->rx_big.cnt < myri10ge_fill_thresh)
1476 myri10ge_alloc_rx_pages(mgp, &ss->rx_big, mgp->big_bytes, 0);
1481 static inline void myri10ge_check_statblock(struct myri10ge_priv *mgp)
1483 struct mcp_irq_data *stats = mgp->ss[0].fw_stats;
1485 if (unlikely(stats->stats_updated)) {
1486 unsigned link_up = ntohl(stats->link_up);
1487 if (mgp->link_state != link_up) {
1488 mgp->link_state = link_up;
1490 if (mgp->link_state == MXGEFW_LINK_UP) {
1491 netif_info(mgp, link, mgp->dev, "link up\n");
1492 netif_carrier_on(mgp->dev);
1493 mgp->link_changes++;
1495 netif_info(mgp, link, mgp->dev, "link %s\n",
1496 (link_up == MXGEFW_LINK_MYRINET ?
1497 "mismatch (Myrinet detected)" :
1499 netif_carrier_off(mgp->dev);
1500 mgp->link_changes++;
1503 if (mgp->rdma_tags_available !=
1504 ntohl(stats->rdma_tags_available)) {
1505 mgp->rdma_tags_available =
1506 ntohl(stats->rdma_tags_available);
1507 netdev_warn(mgp->dev, "RDMA timed out! %d tags left\n",
1508 mgp->rdma_tags_available);
1510 mgp->down_cnt += stats->link_down;
1511 if (stats->link_down)
1512 wake_up(&mgp->down_wq);
1516 static int myri10ge_poll(struct napi_struct *napi, int budget)
1518 struct myri10ge_slice_state *ss =
1519 container_of(napi, struct myri10ge_slice_state, napi);
1522 #ifdef CONFIG_MYRI10GE_DCA
1523 if (ss->mgp->dca_enabled)
1524 myri10ge_update_dca(ss);
1527 /* process as many rx events as NAPI will allow */
1528 work_done = myri10ge_clean_rx_done(ss, budget);
1530 if (work_done < budget) {
1531 napi_complete(napi);
1532 put_be32(htonl(3), ss->irq_claim);
1537 static irqreturn_t myri10ge_intr(int irq, void *arg)
1539 struct myri10ge_slice_state *ss = arg;
1540 struct myri10ge_priv *mgp = ss->mgp;
1541 struct mcp_irq_data *stats = ss->fw_stats;
1542 struct myri10ge_tx_buf *tx = &ss->tx;
1543 u32 send_done_count;
1546 /* an interrupt on a non-zero receive-only slice is implicitly
1547 * valid since MSI-X irqs are not shared */
1548 if ((mgp->dev->real_num_tx_queues == 1) && (ss != mgp->ss)) {
1549 napi_schedule(&ss->napi);
1553 /* make sure it is our IRQ, and that the DMA has finished */
1554 if (unlikely(!stats->valid))
1557 /* low bit indicates receives are present, so schedule
1558 * napi poll handler */
1559 if (stats->valid & 1)
1560 napi_schedule(&ss->napi);
1562 if (!mgp->msi_enabled && !mgp->msix_enabled) {
1563 put_be32(0, mgp->irq_deassert);
1564 if (!myri10ge_deassert_wait)
1570 /* Wait for IRQ line to go low, if using INTx */
1574 /* check for transmit completes and receives */
1575 send_done_count = ntohl(stats->send_done_count);
1576 if (send_done_count != tx->pkt_done)
1577 myri10ge_tx_done(ss, (int)send_done_count);
1578 if (unlikely(i > myri10ge_max_irq_loops)) {
1579 netdev_warn(mgp->dev, "irq stuck?\n");
1581 schedule_work(&mgp->watchdog_work);
1583 if (likely(stats->valid == 0))
1589 /* Only slice 0 updates stats */
1591 myri10ge_check_statblock(mgp);
1593 put_be32(htonl(3), ss->irq_claim + 1);
1598 myri10ge_get_settings(struct net_device *netdev, struct ethtool_cmd *cmd)
1600 struct myri10ge_priv *mgp = netdev_priv(netdev);
1604 cmd->autoneg = AUTONEG_DISABLE;
1605 ethtool_cmd_speed_set(cmd, SPEED_10000);
1606 cmd->duplex = DUPLEX_FULL;
1609 * parse the product code to deterimine the interface type
1610 * (CX4, XFP, Quad Ribbon Fiber) by looking at the character
1611 * after the 3rd dash in the driver's cached copy of the
1612 * EEPROM's product code string.
1614 ptr = mgp->product_code_string;
1616 netdev_err(netdev, "Missing product code\n");
1619 for (i = 0; i < 3; i++, ptr++) {
1620 ptr = strchr(ptr, '-');
1622 netdev_err(netdev, "Invalid product code %s\n",
1623 mgp->product_code_string);
1629 if (*ptr == 'R' || *ptr == 'Q' || *ptr == 'S') {
1630 /* We've found either an XFP, quad ribbon fiber, or SFP+ */
1631 cmd->port = PORT_FIBRE;
1632 cmd->supported |= SUPPORTED_FIBRE;
1633 cmd->advertising |= ADVERTISED_FIBRE;
1635 cmd->port = PORT_OTHER;
1637 if (*ptr == 'R' || *ptr == 'S')
1638 cmd->transceiver = XCVR_EXTERNAL;
1640 cmd->transceiver = XCVR_INTERNAL;
1646 myri10ge_get_drvinfo(struct net_device *netdev, struct ethtool_drvinfo *info)
1648 struct myri10ge_priv *mgp = netdev_priv(netdev);
1650 strlcpy(info->driver, "myri10ge", sizeof(info->driver));
1651 strlcpy(info->version, MYRI10GE_VERSION_STR, sizeof(info->version));
1652 strlcpy(info->fw_version, mgp->fw_version, sizeof(info->fw_version));
1653 strlcpy(info->bus_info, pci_name(mgp->pdev), sizeof(info->bus_info));
1657 myri10ge_get_coalesce(struct net_device *netdev, struct ethtool_coalesce *coal)
1659 struct myri10ge_priv *mgp = netdev_priv(netdev);
1661 coal->rx_coalesce_usecs = mgp->intr_coal_delay;
1666 myri10ge_set_coalesce(struct net_device *netdev, struct ethtool_coalesce *coal)
1668 struct myri10ge_priv *mgp = netdev_priv(netdev);
1670 mgp->intr_coal_delay = coal->rx_coalesce_usecs;
1671 put_be32(htonl(mgp->intr_coal_delay), mgp->intr_coal_delay_ptr);
1676 myri10ge_get_pauseparam(struct net_device *netdev,
1677 struct ethtool_pauseparam *pause)
1679 struct myri10ge_priv *mgp = netdev_priv(netdev);
1682 pause->rx_pause = mgp->pause;
1683 pause->tx_pause = mgp->pause;
1687 myri10ge_set_pauseparam(struct net_device *netdev,
1688 struct ethtool_pauseparam *pause)
1690 struct myri10ge_priv *mgp = netdev_priv(netdev);
1692 if (pause->tx_pause != mgp->pause)
1693 return myri10ge_change_pause(mgp, pause->tx_pause);
1694 if (pause->rx_pause != mgp->pause)
1695 return myri10ge_change_pause(mgp, pause->rx_pause);
1696 if (pause->autoneg != 0)
1702 myri10ge_get_ringparam(struct net_device *netdev,
1703 struct ethtool_ringparam *ring)
1705 struct myri10ge_priv *mgp = netdev_priv(netdev);
1707 ring->rx_mini_max_pending = mgp->ss[0].rx_small.mask + 1;
1708 ring->rx_max_pending = mgp->ss[0].rx_big.mask + 1;
1709 ring->rx_jumbo_max_pending = 0;
1710 ring->tx_max_pending = mgp->ss[0].tx.mask + 1;
1711 ring->rx_mini_pending = ring->rx_mini_max_pending;
1712 ring->rx_pending = ring->rx_max_pending;
1713 ring->rx_jumbo_pending = ring->rx_jumbo_max_pending;
1714 ring->tx_pending = ring->tx_max_pending;
1717 static const char myri10ge_gstrings_main_stats[][ETH_GSTRING_LEN] = {
1718 "rx_packets", "tx_packets", "rx_bytes", "tx_bytes", "rx_errors",
1719 "tx_errors", "rx_dropped", "tx_dropped", "multicast", "collisions",
1720 "rx_length_errors", "rx_over_errors", "rx_crc_errors",
1721 "rx_frame_errors", "rx_fifo_errors", "rx_missed_errors",
1722 "tx_aborted_errors", "tx_carrier_errors", "tx_fifo_errors",
1723 "tx_heartbeat_errors", "tx_window_errors",
1724 /* device-specific stats */
1725 "tx_boundary", "WC", "irq", "MSI", "MSIX",
1726 "read_dma_bw_MBs", "write_dma_bw_MBs", "read_write_dma_bw_MBs",
1727 "serial_number", "watchdog_resets",
1728 #ifdef CONFIG_MYRI10GE_DCA
1729 "dca_capable_firmware", "dca_device_present",
1731 "link_changes", "link_up", "dropped_link_overflow",
1732 "dropped_link_error_or_filtered",
1733 "dropped_pause", "dropped_bad_phy", "dropped_bad_crc32",
1734 "dropped_unicast_filtered", "dropped_multicast_filtered",
1735 "dropped_runt", "dropped_overrun", "dropped_no_small_buffer",
1736 "dropped_no_big_buffer"
1739 static const char myri10ge_gstrings_slice_stats[][ETH_GSTRING_LEN] = {
1740 "----------- slice ---------",
1741 "tx_pkt_start", "tx_pkt_done", "tx_req", "tx_done",
1742 "rx_small_cnt", "rx_big_cnt",
1743 "wake_queue", "stop_queue", "tx_linearized",
1746 #define MYRI10GE_NET_STATS_LEN 21
1747 #define MYRI10GE_MAIN_STATS_LEN ARRAY_SIZE(myri10ge_gstrings_main_stats)
1748 #define MYRI10GE_SLICE_STATS_LEN ARRAY_SIZE(myri10ge_gstrings_slice_stats)
1751 myri10ge_get_strings(struct net_device *netdev, u32 stringset, u8 * data)
1753 struct myri10ge_priv *mgp = netdev_priv(netdev);
1756 switch (stringset) {
1758 memcpy(data, *myri10ge_gstrings_main_stats,
1759 sizeof(myri10ge_gstrings_main_stats));
1760 data += sizeof(myri10ge_gstrings_main_stats);
1761 for (i = 0; i < mgp->num_slices; i++) {
1762 memcpy(data, *myri10ge_gstrings_slice_stats,
1763 sizeof(myri10ge_gstrings_slice_stats));
1764 data += sizeof(myri10ge_gstrings_slice_stats);
1770 static int myri10ge_get_sset_count(struct net_device *netdev, int sset)
1772 struct myri10ge_priv *mgp = netdev_priv(netdev);
1776 return MYRI10GE_MAIN_STATS_LEN +
1777 mgp->num_slices * MYRI10GE_SLICE_STATS_LEN;
1784 myri10ge_get_ethtool_stats(struct net_device *netdev,
1785 struct ethtool_stats *stats, u64 * data)
1787 struct myri10ge_priv *mgp = netdev_priv(netdev);
1788 struct myri10ge_slice_state *ss;
1789 struct rtnl_link_stats64 link_stats;
1793 /* force stats update */
1794 memset(&link_stats, 0, sizeof(link_stats));
1795 (void)myri10ge_get_stats(netdev, &link_stats);
1796 for (i = 0; i < MYRI10GE_NET_STATS_LEN; i++)
1797 data[i] = ((u64 *)&link_stats)[i];
1799 data[i++] = (unsigned int)mgp->tx_boundary;
1800 data[i++] = (unsigned int)mgp->wc_enabled;
1801 data[i++] = (unsigned int)mgp->pdev->irq;
1802 data[i++] = (unsigned int)mgp->msi_enabled;
1803 data[i++] = (unsigned int)mgp->msix_enabled;
1804 data[i++] = (unsigned int)mgp->read_dma;
1805 data[i++] = (unsigned int)mgp->write_dma;
1806 data[i++] = (unsigned int)mgp->read_write_dma;
1807 data[i++] = (unsigned int)mgp->serial_number;
1808 data[i++] = (unsigned int)mgp->watchdog_resets;
1809 #ifdef CONFIG_MYRI10GE_DCA
1810 data[i++] = (unsigned int)(mgp->ss[0].dca_tag != NULL);
1811 data[i++] = (unsigned int)(mgp->dca_enabled);
1813 data[i++] = (unsigned int)mgp->link_changes;
1815 /* firmware stats are useful only in the first slice */
1817 data[i++] = (unsigned int)ntohl(ss->fw_stats->link_up);
1818 data[i++] = (unsigned int)ntohl(ss->fw_stats->dropped_link_overflow);
1820 (unsigned int)ntohl(ss->fw_stats->dropped_link_error_or_filtered);
1821 data[i++] = (unsigned int)ntohl(ss->fw_stats->dropped_pause);
1822 data[i++] = (unsigned int)ntohl(ss->fw_stats->dropped_bad_phy);
1823 data[i++] = (unsigned int)ntohl(ss->fw_stats->dropped_bad_crc32);
1824 data[i++] = (unsigned int)ntohl(ss->fw_stats->dropped_unicast_filtered);
1826 (unsigned int)ntohl(ss->fw_stats->dropped_multicast_filtered);
1827 data[i++] = (unsigned int)ntohl(ss->fw_stats->dropped_runt);
1828 data[i++] = (unsigned int)ntohl(ss->fw_stats->dropped_overrun);
1829 data[i++] = (unsigned int)ntohl(ss->fw_stats->dropped_no_small_buffer);
1830 data[i++] = (unsigned int)ntohl(ss->fw_stats->dropped_no_big_buffer);
1832 for (slice = 0; slice < mgp->num_slices; slice++) {
1833 ss = &mgp->ss[slice];
1835 data[i++] = (unsigned int)ss->tx.pkt_start;
1836 data[i++] = (unsigned int)ss->tx.pkt_done;
1837 data[i++] = (unsigned int)ss->tx.req;
1838 data[i++] = (unsigned int)ss->tx.done;
1839 data[i++] = (unsigned int)ss->rx_small.cnt;
1840 data[i++] = (unsigned int)ss->rx_big.cnt;
1841 data[i++] = (unsigned int)ss->tx.wake_queue;
1842 data[i++] = (unsigned int)ss->tx.stop_queue;
1843 data[i++] = (unsigned int)ss->tx.linearized;
1847 static void myri10ge_set_msglevel(struct net_device *netdev, u32 value)
1849 struct myri10ge_priv *mgp = netdev_priv(netdev);
1850 mgp->msg_enable = value;
1853 static u32 myri10ge_get_msglevel(struct net_device *netdev)
1855 struct myri10ge_priv *mgp = netdev_priv(netdev);
1856 return mgp->msg_enable;
1860 * Use a low-level command to change the LED behavior. Rather than
1861 * blinking (which is the normal case), when identify is used, the
1862 * yellow LED turns solid.
1864 static int myri10ge_led(struct myri10ge_priv *mgp, int on)
1866 struct mcp_gen_header *hdr;
1867 struct device *dev = &mgp->pdev->dev;
1868 size_t hdr_off, pattern_off, hdr_len;
1869 u32 pattern = 0xfffffffe;
1871 /* find running firmware header */
1872 hdr_off = swab32(readl(mgp->sram + MCP_HEADER_PTR_OFFSET));
1873 if ((hdr_off & 3) || hdr_off + sizeof(*hdr) > mgp->sram_size) {
1874 dev_err(dev, "Running firmware has bad header offset (%d)\n",
1878 hdr_len = swab32(readl(mgp->sram + hdr_off +
1879 offsetof(struct mcp_gen_header, header_length)));
1880 pattern_off = hdr_off + offsetof(struct mcp_gen_header, led_pattern);
1881 if (pattern_off >= (hdr_len + hdr_off)) {
1882 dev_info(dev, "Firmware does not support LED identification\n");
1886 pattern = swab32(readl(mgp->sram + pattern_off + 4));
1887 writel(swab32(pattern), mgp->sram + pattern_off);
1892 myri10ge_phys_id(struct net_device *netdev, enum ethtool_phys_id_state state)
1894 struct myri10ge_priv *mgp = netdev_priv(netdev);
1898 case ETHTOOL_ID_ACTIVE:
1899 rc = myri10ge_led(mgp, 1);
1902 case ETHTOOL_ID_INACTIVE:
1903 rc = myri10ge_led(mgp, 0);
1913 static const struct ethtool_ops myri10ge_ethtool_ops = {
1914 .get_settings = myri10ge_get_settings,
1915 .get_drvinfo = myri10ge_get_drvinfo,
1916 .get_coalesce = myri10ge_get_coalesce,
1917 .set_coalesce = myri10ge_set_coalesce,
1918 .get_pauseparam = myri10ge_get_pauseparam,
1919 .set_pauseparam = myri10ge_set_pauseparam,
1920 .get_ringparam = myri10ge_get_ringparam,
1921 .get_link = ethtool_op_get_link,
1922 .get_strings = myri10ge_get_strings,
1923 .get_sset_count = myri10ge_get_sset_count,
1924 .get_ethtool_stats = myri10ge_get_ethtool_stats,
1925 .set_msglevel = myri10ge_set_msglevel,
1926 .get_msglevel = myri10ge_get_msglevel,
1927 .set_phys_id = myri10ge_phys_id,
1930 static int myri10ge_allocate_rings(struct myri10ge_slice_state *ss)
1932 struct myri10ge_priv *mgp = ss->mgp;
1933 struct myri10ge_cmd cmd;
1934 struct net_device *dev = mgp->dev;
1935 int tx_ring_size, rx_ring_size;
1936 int tx_ring_entries, rx_ring_entries;
1937 int i, slice, status;
1940 /* get ring sizes */
1941 slice = ss - mgp->ss;
1943 status = myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_SEND_RING_SIZE, &cmd, 0);
1944 tx_ring_size = cmd.data0;
1946 status |= myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_RX_RING_SIZE, &cmd, 0);
1949 rx_ring_size = cmd.data0;
1951 tx_ring_entries = tx_ring_size / sizeof(struct mcp_kreq_ether_send);
1952 rx_ring_entries = rx_ring_size / sizeof(struct mcp_dma_addr);
1953 ss->tx.mask = tx_ring_entries - 1;
1954 ss->rx_small.mask = ss->rx_big.mask = rx_ring_entries - 1;
1958 /* allocate the host shadow rings */
1960 bytes = 8 + (MYRI10GE_MAX_SEND_DESC_TSO + 4)
1961 * sizeof(*ss->tx.req_list);
1962 ss->tx.req_bytes = kzalloc(bytes, GFP_KERNEL);
1963 if (ss->tx.req_bytes == NULL)
1964 goto abort_with_nothing;
1966 /* ensure req_list entries are aligned to 8 bytes */
1967 ss->tx.req_list = (struct mcp_kreq_ether_send *)
1968 ALIGN((unsigned long)ss->tx.req_bytes, 8);
1969 ss->tx.queue_active = 0;
1971 bytes = rx_ring_entries * sizeof(*ss->rx_small.shadow);
1972 ss->rx_small.shadow = kzalloc(bytes, GFP_KERNEL);
1973 if (ss->rx_small.shadow == NULL)
1974 goto abort_with_tx_req_bytes;
1976 bytes = rx_ring_entries * sizeof(*ss->rx_big.shadow);
1977 ss->rx_big.shadow = kzalloc(bytes, GFP_KERNEL);
1978 if (ss->rx_big.shadow == NULL)
1979 goto abort_with_rx_small_shadow;
1981 /* allocate the host info rings */
1983 bytes = tx_ring_entries * sizeof(*ss->tx.info);
1984 ss->tx.info = kzalloc(bytes, GFP_KERNEL);
1985 if (ss->tx.info == NULL)
1986 goto abort_with_rx_big_shadow;
1988 bytes = rx_ring_entries * sizeof(*ss->rx_small.info);
1989 ss->rx_small.info = kzalloc(bytes, GFP_KERNEL);
1990 if (ss->rx_small.info == NULL)
1991 goto abort_with_tx_info;
1993 bytes = rx_ring_entries * sizeof(*ss->rx_big.info);
1994 ss->rx_big.info = kzalloc(bytes, GFP_KERNEL);
1995 if (ss->rx_big.info == NULL)
1996 goto abort_with_rx_small_info;
1998 /* Fill the receive rings */
2000 ss->rx_small.cnt = 0;
2001 ss->rx_big.fill_cnt = 0;
2002 ss->rx_small.fill_cnt = 0;
2003 ss->rx_small.page_offset = MYRI10GE_ALLOC_SIZE;
2004 ss->rx_big.page_offset = MYRI10GE_ALLOC_SIZE;
2005 ss->rx_small.watchdog_needed = 0;
2006 ss->rx_big.watchdog_needed = 0;
2007 if (mgp->small_bytes == 0) {
2008 ss->rx_small.fill_cnt = ss->rx_small.mask + 1;
2010 myri10ge_alloc_rx_pages(mgp, &ss->rx_small,
2011 mgp->small_bytes + MXGEFW_PAD, 0);
2014 if (ss->rx_small.fill_cnt < ss->rx_small.mask + 1) {
2015 netdev_err(dev, "slice-%d: alloced only %d small bufs\n",
2016 slice, ss->rx_small.fill_cnt);
2017 goto abort_with_rx_small_ring;
2020 myri10ge_alloc_rx_pages(mgp, &ss->rx_big, mgp->big_bytes, 0);
2021 if (ss->rx_big.fill_cnt < ss->rx_big.mask + 1) {
2022 netdev_err(dev, "slice-%d: alloced only %d big bufs\n",
2023 slice, ss->rx_big.fill_cnt);
2024 goto abort_with_rx_big_ring;
2029 abort_with_rx_big_ring:
2030 for (i = ss->rx_big.cnt; i < ss->rx_big.fill_cnt; i++) {
2031 int idx = i & ss->rx_big.mask;
2032 myri10ge_unmap_rx_page(mgp->pdev, &ss->rx_big.info[idx],
2034 put_page(ss->rx_big.info[idx].page);
2037 abort_with_rx_small_ring:
2038 if (mgp->small_bytes == 0)
2039 ss->rx_small.fill_cnt = ss->rx_small.cnt;
2040 for (i = ss->rx_small.cnt; i < ss->rx_small.fill_cnt; i++) {
2041 int idx = i & ss->rx_small.mask;
2042 myri10ge_unmap_rx_page(mgp->pdev, &ss->rx_small.info[idx],
2043 mgp->small_bytes + MXGEFW_PAD);
2044 put_page(ss->rx_small.info[idx].page);
2047 kfree(ss->rx_big.info);
2049 abort_with_rx_small_info:
2050 kfree(ss->rx_small.info);
2055 abort_with_rx_big_shadow:
2056 kfree(ss->rx_big.shadow);
2058 abort_with_rx_small_shadow:
2059 kfree(ss->rx_small.shadow);
2061 abort_with_tx_req_bytes:
2062 kfree(ss->tx.req_bytes);
2063 ss->tx.req_bytes = NULL;
2064 ss->tx.req_list = NULL;
2070 static void myri10ge_free_rings(struct myri10ge_slice_state *ss)
2072 struct myri10ge_priv *mgp = ss->mgp;
2073 struct sk_buff *skb;
2074 struct myri10ge_tx_buf *tx;
2077 /* If not allocated, skip it */
2078 if (ss->tx.req_list == NULL)
2081 for (i = ss->rx_big.cnt; i < ss->rx_big.fill_cnt; i++) {
2082 idx = i & ss->rx_big.mask;
2083 if (i == ss->rx_big.fill_cnt - 1)
2084 ss->rx_big.info[idx].page_offset = MYRI10GE_ALLOC_SIZE;
2085 myri10ge_unmap_rx_page(mgp->pdev, &ss->rx_big.info[idx],
2087 put_page(ss->rx_big.info[idx].page);
2090 if (mgp->small_bytes == 0)
2091 ss->rx_small.fill_cnt = ss->rx_small.cnt;
2092 for (i = ss->rx_small.cnt; i < ss->rx_small.fill_cnt; i++) {
2093 idx = i & ss->rx_small.mask;
2094 if (i == ss->rx_small.fill_cnt - 1)
2095 ss->rx_small.info[idx].page_offset =
2096 MYRI10GE_ALLOC_SIZE;
2097 myri10ge_unmap_rx_page(mgp->pdev, &ss->rx_small.info[idx],
2098 mgp->small_bytes + MXGEFW_PAD);
2099 put_page(ss->rx_small.info[idx].page);
2102 while (tx->done != tx->req) {
2103 idx = tx->done & tx->mask;
2104 skb = tx->info[idx].skb;
2107 tx->info[idx].skb = NULL;
2109 len = dma_unmap_len(&tx->info[idx], len);
2110 dma_unmap_len_set(&tx->info[idx], len, 0);
2112 ss->stats.tx_dropped++;
2113 dev_kfree_skb_any(skb);
2115 pci_unmap_single(mgp->pdev,
2116 dma_unmap_addr(&tx->info[idx],
2121 pci_unmap_page(mgp->pdev,
2122 dma_unmap_addr(&tx->info[idx],
2127 kfree(ss->rx_big.info);
2129 kfree(ss->rx_small.info);
2133 kfree(ss->rx_big.shadow);
2135 kfree(ss->rx_small.shadow);
2137 kfree(ss->tx.req_bytes);
2138 ss->tx.req_bytes = NULL;
2139 ss->tx.req_list = NULL;
2142 static int myri10ge_request_irq(struct myri10ge_priv *mgp)
2144 struct pci_dev *pdev = mgp->pdev;
2145 struct myri10ge_slice_state *ss;
2146 struct net_device *netdev = mgp->dev;
2150 mgp->msi_enabled = 0;
2151 mgp->msix_enabled = 0;
2154 if (mgp->num_slices > 1) {
2156 pci_enable_msix(pdev, mgp->msix_vectors,
2159 mgp->msix_enabled = 1;
2162 "Error %d setting up MSI-X\n", status);
2166 if (mgp->msix_enabled == 0) {
2167 status = pci_enable_msi(pdev);
2170 "Error %d setting up MSI; falling back to xPIC\n",
2173 mgp->msi_enabled = 1;
2177 if (mgp->msix_enabled) {
2178 for (i = 0; i < mgp->num_slices; i++) {
2180 snprintf(ss->irq_desc, sizeof(ss->irq_desc),
2181 "%s:slice-%d", netdev->name, i);
2182 status = request_irq(mgp->msix_vectors[i].vector,
2183 myri10ge_intr, 0, ss->irq_desc,
2187 "slice %d failed to allocate IRQ\n", i);
2190 free_irq(mgp->msix_vectors[i].vector,
2194 pci_disable_msix(pdev);
2199 status = request_irq(pdev->irq, myri10ge_intr, IRQF_SHARED,
2200 mgp->dev->name, &mgp->ss[0]);
2202 dev_err(&pdev->dev, "failed to allocate IRQ\n");
2203 if (mgp->msi_enabled)
2204 pci_disable_msi(pdev);
2210 static void myri10ge_free_irq(struct myri10ge_priv *mgp)
2212 struct pci_dev *pdev = mgp->pdev;
2215 if (mgp->msix_enabled) {
2216 for (i = 0; i < mgp->num_slices; i++)
2217 free_irq(mgp->msix_vectors[i].vector, &mgp->ss[i]);
2219 free_irq(pdev->irq, &mgp->ss[0]);
2221 if (mgp->msi_enabled)
2222 pci_disable_msi(pdev);
2223 if (mgp->msix_enabled)
2224 pci_disable_msix(pdev);
2227 static int myri10ge_get_txrx(struct myri10ge_priv *mgp, int slice)
2229 struct myri10ge_cmd cmd;
2230 struct myri10ge_slice_state *ss;
2233 ss = &mgp->ss[slice];
2235 if (slice == 0 || (mgp->dev->real_num_tx_queues > 1)) {
2237 status = myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_SEND_OFFSET,
2239 ss->tx.lanai = (struct mcp_kreq_ether_send __iomem *)
2240 (mgp->sram + cmd.data0);
2243 status |= myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_SMALL_RX_OFFSET,
2245 ss->rx_small.lanai = (struct mcp_kreq_ether_recv __iomem *)
2246 (mgp->sram + cmd.data0);
2249 status |= myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_BIG_RX_OFFSET, &cmd, 0);
2250 ss->rx_big.lanai = (struct mcp_kreq_ether_recv __iomem *)
2251 (mgp->sram + cmd.data0);
2253 ss->tx.send_go = (__iomem __be32 *)
2254 (mgp->sram + MXGEFW_ETH_SEND_GO + 64 * slice);
2255 ss->tx.send_stop = (__iomem __be32 *)
2256 (mgp->sram + MXGEFW_ETH_SEND_STOP + 64 * slice);
2261 static int myri10ge_set_stats(struct myri10ge_priv *mgp, int slice)
2263 struct myri10ge_cmd cmd;
2264 struct myri10ge_slice_state *ss;
2267 ss = &mgp->ss[slice];
2268 cmd.data0 = MYRI10GE_LOWPART_TO_U32(ss->fw_stats_bus);
2269 cmd.data1 = MYRI10GE_HIGHPART_TO_U32(ss->fw_stats_bus);
2270 cmd.data2 = sizeof(struct mcp_irq_data) | (slice << 16);
2271 status = myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_STATS_DMA_V2, &cmd, 0);
2272 if (status == -ENOSYS) {
2273 dma_addr_t bus = ss->fw_stats_bus;
2276 bus += offsetof(struct mcp_irq_data, send_done_count);
2277 cmd.data0 = MYRI10GE_LOWPART_TO_U32(bus);
2278 cmd.data1 = MYRI10GE_HIGHPART_TO_U32(bus);
2279 status = myri10ge_send_cmd(mgp,
2280 MXGEFW_CMD_SET_STATS_DMA_OBSOLETE,
2282 /* Firmware cannot support multicast without STATS_DMA_V2 */
2283 mgp->fw_multicast_support = 0;
2285 mgp->fw_multicast_support = 1;
2290 static int myri10ge_open(struct net_device *dev)
2292 struct myri10ge_slice_state *ss;
2293 struct myri10ge_priv *mgp = netdev_priv(dev);
2294 struct myri10ge_cmd cmd;
2295 int i, status, big_pow2, slice;
2298 if (mgp->running != MYRI10GE_ETH_STOPPED)
2301 mgp->running = MYRI10GE_ETH_STARTING;
2302 status = myri10ge_reset(mgp);
2304 netdev_err(dev, "failed reset\n");
2305 goto abort_with_nothing;
2308 if (mgp->num_slices > 1) {
2309 cmd.data0 = mgp->num_slices;
2310 cmd.data1 = MXGEFW_SLICE_INTR_MODE_ONE_PER_SLICE;
2311 if (mgp->dev->real_num_tx_queues > 1)
2312 cmd.data1 |= MXGEFW_SLICE_ENABLE_MULTIPLE_TX_QUEUES;
2313 status = myri10ge_send_cmd(mgp, MXGEFW_CMD_ENABLE_RSS_QUEUES,
2316 netdev_err(dev, "failed to set number of slices\n");
2317 goto abort_with_nothing;
2319 /* setup the indirection table */
2320 cmd.data0 = mgp->num_slices;
2321 status = myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_RSS_TABLE_SIZE,
2324 status |= myri10ge_send_cmd(mgp,
2325 MXGEFW_CMD_GET_RSS_TABLE_OFFSET,
2328 netdev_err(dev, "failed to setup rss tables\n");
2329 goto abort_with_nothing;
2332 /* just enable an identity mapping */
2333 itable = mgp->sram + cmd.data0;
2334 for (i = 0; i < mgp->num_slices; i++)
2335 __raw_writeb(i, &itable[i]);
2338 cmd.data1 = myri10ge_rss_hash;
2339 status = myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_RSS_ENABLE,
2342 netdev_err(dev, "failed to enable slices\n");
2343 goto abort_with_nothing;
2347 status = myri10ge_request_irq(mgp);
2349 goto abort_with_nothing;
2351 /* decide what small buffer size to use. For good TCP rx
2352 * performance, it is important to not receive 1514 byte
2353 * frames into jumbo buffers, as it confuses the socket buffer
2354 * accounting code, leading to drops and erratic performance.
2357 if (dev->mtu <= ETH_DATA_LEN)
2358 /* enough for a TCP header */
2359 mgp->small_bytes = (128 > SMP_CACHE_BYTES)
2360 ? (128 - MXGEFW_PAD)
2361 : (SMP_CACHE_BYTES - MXGEFW_PAD);
2363 /* enough for a vlan encapsulated ETH_DATA_LEN frame */
2364 mgp->small_bytes = VLAN_ETH_FRAME_LEN;
2366 /* Override the small buffer size? */
2367 if (myri10ge_small_bytes >= 0)
2368 mgp->small_bytes = myri10ge_small_bytes;
2370 /* Firmware needs the big buff size as a power of 2. Lie and
2371 * tell him the buffer is larger, because we only use 1
2372 * buffer/pkt, and the mtu will prevent overruns.
2374 big_pow2 = dev->mtu + ETH_HLEN + VLAN_HLEN + MXGEFW_PAD;
2375 if (big_pow2 < MYRI10GE_ALLOC_SIZE / 2) {
2376 while (!is_power_of_2(big_pow2))
2378 mgp->big_bytes = dev->mtu + ETH_HLEN + VLAN_HLEN + MXGEFW_PAD;
2380 big_pow2 = MYRI10GE_ALLOC_SIZE;
2381 mgp->big_bytes = big_pow2;
2384 /* setup the per-slice data structures */
2385 for (slice = 0; slice < mgp->num_slices; slice++) {
2386 ss = &mgp->ss[slice];
2388 status = myri10ge_get_txrx(mgp, slice);
2390 netdev_err(dev, "failed to get ring sizes or locations\n");
2391 goto abort_with_rings;
2393 status = myri10ge_allocate_rings(ss);
2395 goto abort_with_rings;
2397 /* only firmware which supports multiple TX queues
2398 * supports setting up the tx stats on non-zero
2400 if (slice == 0 || mgp->dev->real_num_tx_queues > 1)
2401 status = myri10ge_set_stats(mgp, slice);
2403 netdev_err(dev, "Couldn't set stats DMA\n");
2404 goto abort_with_rings;
2407 /* must happen prior to any irq */
2408 napi_enable(&(ss)->napi);
2411 /* now give firmware buffers sizes, and MTU */
2412 cmd.data0 = dev->mtu + ETH_HLEN + VLAN_HLEN;
2413 status = myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_MTU, &cmd, 0);
2414 cmd.data0 = mgp->small_bytes;
2416 myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_SMALL_BUFFER_SIZE, &cmd, 0);
2417 cmd.data0 = big_pow2;
2419 myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_BIG_BUFFER_SIZE, &cmd, 0);
2421 netdev_err(dev, "Couldn't set buffer sizes\n");
2422 goto abort_with_rings;
2426 * Set Linux style TSO mode; this is needed only on newer
2427 * firmware versions. Older versions default to Linux
2431 status = myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_TSO_MODE, &cmd, 0);
2432 if (status && status != -ENOSYS) {
2433 netdev_err(dev, "Couldn't set TSO mode\n");
2434 goto abort_with_rings;
2437 mgp->link_state = ~0U;
2438 mgp->rdma_tags_available = 15;
2440 status = myri10ge_send_cmd(mgp, MXGEFW_CMD_ETHERNET_UP, &cmd, 0);
2442 netdev_err(dev, "Couldn't bring up link\n");
2443 goto abort_with_rings;
2446 mgp->running = MYRI10GE_ETH_RUNNING;
2447 mgp->watchdog_timer.expires = jiffies + myri10ge_watchdog_timeout * HZ;
2448 add_timer(&mgp->watchdog_timer);
2449 netif_tx_wake_all_queues(dev);
2456 napi_disable(&mgp->ss[slice].napi);
2458 for (i = 0; i < mgp->num_slices; i++)
2459 myri10ge_free_rings(&mgp->ss[i]);
2461 myri10ge_free_irq(mgp);
2464 mgp->running = MYRI10GE_ETH_STOPPED;
2468 static int myri10ge_close(struct net_device *dev)
2470 struct myri10ge_priv *mgp = netdev_priv(dev);
2471 struct myri10ge_cmd cmd;
2472 int status, old_down_cnt;
2475 if (mgp->running != MYRI10GE_ETH_RUNNING)
2478 if (mgp->ss[0].tx.req_bytes == NULL)
2481 del_timer_sync(&mgp->watchdog_timer);
2482 mgp->running = MYRI10GE_ETH_STOPPING;
2483 for (i = 0; i < mgp->num_slices; i++) {
2484 napi_disable(&mgp->ss[i].napi);
2486 netif_carrier_off(dev);
2488 netif_tx_stop_all_queues(dev);
2489 if (mgp->rebooted == 0) {
2490 old_down_cnt = mgp->down_cnt;
2493 myri10ge_send_cmd(mgp, MXGEFW_CMD_ETHERNET_DOWN, &cmd, 0);
2495 netdev_err(dev, "Couldn't bring down link\n");
2497 wait_event_timeout(mgp->down_wq, old_down_cnt != mgp->down_cnt,
2499 if (old_down_cnt == mgp->down_cnt)
2500 netdev_err(dev, "never got down irq\n");
2502 netif_tx_disable(dev);
2503 myri10ge_free_irq(mgp);
2504 for (i = 0; i < mgp->num_slices; i++)
2505 myri10ge_free_rings(&mgp->ss[i]);
2507 mgp->running = MYRI10GE_ETH_STOPPED;
2511 /* copy an array of struct mcp_kreq_ether_send's to the mcp. Copy
2512 * backwards one at a time and handle ring wraps */
2515 myri10ge_submit_req_backwards(struct myri10ge_tx_buf *tx,
2516 struct mcp_kreq_ether_send *src, int cnt)
2518 int idx, starting_slot;
2519 starting_slot = tx->req;
2522 idx = (starting_slot + cnt) & tx->mask;
2523 myri10ge_pio_copy(&tx->lanai[idx], &src[cnt], sizeof(*src));
2529 * copy an array of struct mcp_kreq_ether_send's to the mcp. Copy
2530 * at most 32 bytes at a time, so as to avoid involving the software
2531 * pio handler in the nic. We re-write the first segment's flags
2532 * to mark them valid only after writing the entire chain.
2536 myri10ge_submit_req(struct myri10ge_tx_buf *tx, struct mcp_kreq_ether_send *src,
2540 struct mcp_kreq_ether_send __iomem *dstp, *dst;
2541 struct mcp_kreq_ether_send *srcp;
2544 idx = tx->req & tx->mask;
2546 last_flags = src->flags;
2549 dst = dstp = &tx->lanai[idx];
2552 if ((idx + cnt) < tx->mask) {
2553 for (i = 0; i < (cnt - 1); i += 2) {
2554 myri10ge_pio_copy(dstp, srcp, 2 * sizeof(*src));
2555 mb(); /* force write every 32 bytes */
2560 /* submit all but the first request, and ensure
2561 * that it is submitted below */
2562 myri10ge_submit_req_backwards(tx, src, cnt);
2566 /* submit the first request */
2567 myri10ge_pio_copy(dstp, srcp, sizeof(*src));
2568 mb(); /* barrier before setting valid flag */
2571 /* re-write the last 32-bits with the valid flags */
2572 src->flags = last_flags;
2573 put_be32(*((__be32 *) src + 3), (__be32 __iomem *) dst + 3);
2579 * Transmit a packet. We need to split the packet so that a single
2580 * segment does not cross myri10ge->tx_boundary, so this makes segment
2581 * counting tricky. So rather than try to count segments up front, we
2582 * just give up if there are too few segments to hold a reasonably
2583 * fragmented packet currently available. If we run
2584 * out of segments while preparing a packet for DMA, we just linearize
2588 static netdev_tx_t myri10ge_xmit(struct sk_buff *skb,
2589 struct net_device *dev)
2591 struct myri10ge_priv *mgp = netdev_priv(dev);
2592 struct myri10ge_slice_state *ss;
2593 struct mcp_kreq_ether_send *req;
2594 struct myri10ge_tx_buf *tx;
2595 struct skb_frag_struct *frag;
2596 struct netdev_queue *netdev_queue;
2599 __be32 high_swapped;
2601 int idx, last_idx, avail, frag_cnt, frag_idx, count, mss, max_segments;
2602 u16 pseudo_hdr_offset, cksum_offset, queue;
2603 int cum_len, seglen, boundary, rdma_count;
2606 queue = skb_get_queue_mapping(skb);
2607 ss = &mgp->ss[queue];
2608 netdev_queue = netdev_get_tx_queue(mgp->dev, queue);
2613 avail = tx->mask - 1 - (tx->req - tx->done);
2616 max_segments = MXGEFW_MAX_SEND_DESC;
2618 if (skb_is_gso(skb)) {
2619 mss = skb_shinfo(skb)->gso_size;
2620 max_segments = MYRI10GE_MAX_SEND_DESC_TSO;
2623 if ((unlikely(avail < max_segments))) {
2624 /* we are out of transmit resources */
2626 netif_tx_stop_queue(netdev_queue);
2627 return NETDEV_TX_BUSY;
2630 /* Setup checksum offloading, if needed */
2632 pseudo_hdr_offset = 0;
2634 flags = (MXGEFW_FLAGS_NO_TSO | MXGEFW_FLAGS_FIRST);
2635 if (likely(skb->ip_summed == CHECKSUM_PARTIAL)) {
2636 cksum_offset = skb_checksum_start_offset(skb);
2637 pseudo_hdr_offset = cksum_offset + skb->csum_offset;
2638 /* If the headers are excessively large, then we must
2639 * fall back to a software checksum */
2640 if (unlikely(!mss && (cksum_offset > 255 ||
2641 pseudo_hdr_offset > 127))) {
2642 if (skb_checksum_help(skb))
2645 pseudo_hdr_offset = 0;
2647 odd_flag = MXGEFW_FLAGS_ALIGN_ODD;
2648 flags |= MXGEFW_FLAGS_CKSUM;
2654 if (mss) { /* TSO */
2655 /* this removes any CKSUM flag from before */
2656 flags = (MXGEFW_FLAGS_TSO_HDR | MXGEFW_FLAGS_FIRST);
2658 /* negative cum_len signifies to the
2659 * send loop that we are still in the
2660 * header portion of the TSO packet.
2661 * TSO header can be at most 1KB long */
2662 cum_len = -(skb_transport_offset(skb) + tcp_hdrlen(skb));
2664 /* for IPv6 TSO, the checksum offset stores the
2665 * TCP header length, to save the firmware from
2666 * the need to parse the headers */
2667 if (skb_is_gso_v6(skb)) {
2668 cksum_offset = tcp_hdrlen(skb);
2669 /* Can only handle headers <= max_tso6 long */
2670 if (unlikely(-cum_len > mgp->max_tso6))
2671 return myri10ge_sw_tso(skb, dev);
2673 /* for TSO, pseudo_hdr_offset holds mss.
2674 * The firmware figures out where to put
2675 * the checksum by parsing the header. */
2676 pseudo_hdr_offset = mss;
2678 /* Mark small packets, and pad out tiny packets */
2679 if (skb->len <= MXGEFW_SEND_SMALL_SIZE) {
2680 flags |= MXGEFW_FLAGS_SMALL;
2682 /* pad frames to at least ETH_ZLEN bytes */
2683 if (unlikely(skb->len < ETH_ZLEN)) {
2684 if (skb_padto(skb, ETH_ZLEN)) {
2685 /* The packet is gone, so we must
2687 ss->stats.tx_dropped += 1;
2688 return NETDEV_TX_OK;
2690 /* adjust the len to account for the zero pad
2691 * so that the nic can know how long it is */
2692 skb->len = ETH_ZLEN;
2696 /* map the skb for DMA */
2697 len = skb_headlen(skb);
2698 idx = tx->req & tx->mask;
2699 tx->info[idx].skb = skb;
2700 bus = pci_map_single(mgp->pdev, skb->data, len, PCI_DMA_TODEVICE);
2701 dma_unmap_addr_set(&tx->info[idx], bus, bus);
2702 dma_unmap_len_set(&tx->info[idx], len, len);
2704 frag_cnt = skb_shinfo(skb)->nr_frags;
2709 /* "rdma_count" is the number of RDMAs belonging to the
2710 * current packet BEFORE the current send request. For
2711 * non-TSO packets, this is equal to "count".
2712 * For TSO packets, rdma_count needs to be reset
2713 * to 0 after a segment cut.
2715 * The rdma_count field of the send request is
2716 * the number of RDMAs of the packet starting at
2717 * that request. For TSO send requests with one ore more cuts
2718 * in the middle, this is the number of RDMAs starting
2719 * after the last cut in the request. All previous
2720 * segments before the last cut implicitly have 1 RDMA.
2722 * Since the number of RDMAs is not known beforehand,
2723 * it must be filled-in retroactively - after each
2724 * segmentation cut or at the end of the entire packet.
2728 /* Break the SKB or Fragment up into pieces which
2729 * do not cross mgp->tx_boundary */
2730 low = MYRI10GE_LOWPART_TO_U32(bus);
2731 high_swapped = htonl(MYRI10GE_HIGHPART_TO_U32(bus));
2736 if (unlikely(count == max_segments))
2737 goto abort_linearize;
2740 (low + mgp->tx_boundary) & ~(mgp->tx_boundary - 1);
2741 seglen = boundary - low;
2744 flags_next = flags & ~MXGEFW_FLAGS_FIRST;
2745 cum_len_next = cum_len + seglen;
2746 if (mss) { /* TSO */
2747 (req - rdma_count)->rdma_count = rdma_count + 1;
2749 if (likely(cum_len >= 0)) { /* payload */
2750 int next_is_first, chop;
2752 chop = (cum_len_next > mss);
2753 cum_len_next = cum_len_next % mss;
2754 next_is_first = (cum_len_next == 0);
2755 flags |= chop * MXGEFW_FLAGS_TSO_CHOP;
2756 flags_next |= next_is_first *
2758 rdma_count |= -(chop | next_is_first);
2759 rdma_count += chop & ~next_is_first;
2760 } else if (likely(cum_len_next >= 0)) { /* header ends */
2766 small = (mss <= MXGEFW_SEND_SMALL_SIZE);
2767 flags_next = MXGEFW_FLAGS_TSO_PLD |
2768 MXGEFW_FLAGS_FIRST |
2769 (small * MXGEFW_FLAGS_SMALL);
2772 req->addr_high = high_swapped;
2773 req->addr_low = htonl(low);
2774 req->pseudo_hdr_offset = htons(pseudo_hdr_offset);
2775 req->pad = 0; /* complete solid 16-byte block; does this matter? */
2776 req->rdma_count = 1;
2777 req->length = htons(seglen);
2778 req->cksum_offset = cksum_offset;
2779 req->flags = flags | ((cum_len & 1) * odd_flag);
2783 cum_len = cum_len_next;
2788 if (cksum_offset != 0 && !(mss && skb_is_gso_v6(skb))) {
2789 if (unlikely(cksum_offset > seglen))
2790 cksum_offset -= seglen;
2795 if (frag_idx == frag_cnt)
2798 /* map next fragment for DMA */
2799 idx = (count + tx->req) & tx->mask;
2800 frag = &skb_shinfo(skb)->frags[frag_idx];
2802 len = skb_frag_size(frag);
2803 bus = skb_frag_dma_map(&mgp->pdev->dev, frag, 0, len,
2805 dma_unmap_addr_set(&tx->info[idx], bus, bus);
2806 dma_unmap_len_set(&tx->info[idx], len, len);
2809 (req - rdma_count)->rdma_count = rdma_count;
2813 req->flags |= MXGEFW_FLAGS_TSO_LAST;
2814 } while (!(req->flags & (MXGEFW_FLAGS_TSO_CHOP |
2815 MXGEFW_FLAGS_FIRST)));
2816 idx = ((count - 1) + tx->req) & tx->mask;
2817 tx->info[idx].last = 1;
2818 myri10ge_submit_req(tx, tx->req_list, count);
2819 /* if using multiple tx queues, make sure NIC polls the
2821 if ((mgp->dev->real_num_tx_queues > 1) && tx->queue_active == 0) {
2822 tx->queue_active = 1;
2823 put_be32(htonl(1), tx->send_go);
2828 if ((avail - count) < MXGEFW_MAX_SEND_DESC) {
2830 netif_tx_stop_queue(netdev_queue);
2832 return NETDEV_TX_OK;
2835 /* Free any DMA resources we've alloced and clear out the skb
2836 * slot so as to not trip up assertions, and to avoid a
2837 * double-free if linearizing fails */
2839 last_idx = (idx + 1) & tx->mask;
2840 idx = tx->req & tx->mask;
2841 tx->info[idx].skb = NULL;
2843 len = dma_unmap_len(&tx->info[idx], len);
2845 if (tx->info[idx].skb != NULL)
2846 pci_unmap_single(mgp->pdev,
2847 dma_unmap_addr(&tx->info[idx],
2851 pci_unmap_page(mgp->pdev,
2852 dma_unmap_addr(&tx->info[idx],
2855 dma_unmap_len_set(&tx->info[idx], len, 0);
2856 tx->info[idx].skb = NULL;
2858 idx = (idx + 1) & tx->mask;
2859 } while (idx != last_idx);
2860 if (skb_is_gso(skb)) {
2861 netdev_err(mgp->dev, "TSO but wanted to linearize?!?!?\n");
2865 if (skb_linearize(skb))
2872 dev_kfree_skb_any(skb);
2873 ss->stats.tx_dropped += 1;
2874 return NETDEV_TX_OK;
2878 static netdev_tx_t myri10ge_sw_tso(struct sk_buff *skb,
2879 struct net_device *dev)
2881 struct sk_buff *segs, *curr;
2882 struct myri10ge_priv *mgp = netdev_priv(dev);
2883 struct myri10ge_slice_state *ss;
2886 segs = skb_gso_segment(skb, dev->features & ~NETIF_F_TSO6);
2894 status = myri10ge_xmit(curr, dev);
2896 dev_kfree_skb_any(curr);
2901 dev_kfree_skb_any(segs);
2906 dev_kfree_skb_any(skb);
2907 return NETDEV_TX_OK;
2910 ss = &mgp->ss[skb_get_queue_mapping(skb)];
2911 dev_kfree_skb_any(skb);
2912 ss->stats.tx_dropped += 1;
2913 return NETDEV_TX_OK;
2916 static struct rtnl_link_stats64 *myri10ge_get_stats(struct net_device *dev,
2917 struct rtnl_link_stats64 *stats)
2919 const struct myri10ge_priv *mgp = netdev_priv(dev);
2920 const struct myri10ge_slice_netstats *slice_stats;
2923 for (i = 0; i < mgp->num_slices; i++) {
2924 slice_stats = &mgp->ss[i].stats;
2925 stats->rx_packets += slice_stats->rx_packets;
2926 stats->tx_packets += slice_stats->tx_packets;
2927 stats->rx_bytes += slice_stats->rx_bytes;
2928 stats->tx_bytes += slice_stats->tx_bytes;
2929 stats->rx_dropped += slice_stats->rx_dropped;
2930 stats->tx_dropped += slice_stats->tx_dropped;
2935 static void myri10ge_set_multicast_list(struct net_device *dev)
2937 struct myri10ge_priv *mgp = netdev_priv(dev);
2938 struct myri10ge_cmd cmd;
2939 struct netdev_hw_addr *ha;
2940 __be32 data[2] = { 0, 0 };
2943 /* can be called from atomic contexts,
2944 * pass 1 to force atomicity in myri10ge_send_cmd() */
2945 myri10ge_change_promisc(mgp, dev->flags & IFF_PROMISC, 1);
2947 /* This firmware is known to not support multicast */
2948 if (!mgp->fw_multicast_support)
2951 /* Disable multicast filtering */
2953 err = myri10ge_send_cmd(mgp, MXGEFW_ENABLE_ALLMULTI, &cmd, 1);
2955 netdev_err(dev, "Failed MXGEFW_ENABLE_ALLMULTI, error status: %d\n",
2960 if ((dev->flags & IFF_ALLMULTI) || mgp->adopted_rx_filter_bug) {
2961 /* request to disable multicast filtering, so quit here */
2965 /* Flush the filters */
2967 err = myri10ge_send_cmd(mgp, MXGEFW_LEAVE_ALL_MULTICAST_GROUPS,
2970 netdev_err(dev, "Failed MXGEFW_LEAVE_ALL_MULTICAST_GROUPS, error status: %d\n",
2975 /* Walk the multicast list, and add each address */
2976 netdev_for_each_mc_addr(ha, dev) {
2977 memcpy(data, &ha->addr, 6);
2978 cmd.data0 = ntohl(data[0]);
2979 cmd.data1 = ntohl(data[1]);
2980 err = myri10ge_send_cmd(mgp, MXGEFW_JOIN_MULTICAST_GROUP,
2984 netdev_err(dev, "Failed MXGEFW_JOIN_MULTICAST_GROUP, error status:%d %pM\n",
2989 /* Enable multicast filtering */
2990 err = myri10ge_send_cmd(mgp, MXGEFW_DISABLE_ALLMULTI, &cmd, 1);
2992 netdev_err(dev, "Failed MXGEFW_DISABLE_ALLMULTI, error status: %d\n",
3003 static int myri10ge_set_mac_address(struct net_device *dev, void *addr)
3005 struct sockaddr *sa = addr;
3006 struct myri10ge_priv *mgp = netdev_priv(dev);
3009 if (!is_valid_ether_addr(sa->sa_data))
3010 return -EADDRNOTAVAIL;
3012 status = myri10ge_update_mac_address(mgp, sa->sa_data);
3014 netdev_err(dev, "changing mac address failed with %d\n",
3019 /* change the dev structure */
3020 memcpy(dev->dev_addr, sa->sa_data, 6);
3024 static int myri10ge_change_mtu(struct net_device *dev, int new_mtu)
3026 struct myri10ge_priv *mgp = netdev_priv(dev);
3029 if ((new_mtu < 68) || (ETH_HLEN + new_mtu > MYRI10GE_MAX_ETHER_MTU)) {
3030 netdev_err(dev, "new mtu (%d) is not valid\n", new_mtu);
3033 netdev_info(dev, "changing mtu from %d to %d\n", dev->mtu, new_mtu);
3035 /* if we change the mtu on an active device, we must
3036 * reset the device so the firmware sees the change */
3037 myri10ge_close(dev);
3047 * Enable ECRC to align PCI-E Completion packets on an 8-byte boundary.
3048 * Only do it if the bridge is a root port since we don't want to disturb
3049 * any other device, except if forced with myri10ge_ecrc_enable > 1.
3052 static void myri10ge_enable_ecrc(struct myri10ge_priv *mgp)
3054 struct pci_dev *bridge = mgp->pdev->bus->self;
3055 struct device *dev = &mgp->pdev->dev;
3060 if (!myri10ge_ecrc_enable || !bridge)
3063 /* check that the bridge is a root port */
3064 if (pci_pcie_type(bridge) != PCI_EXP_TYPE_ROOT_PORT) {
3065 if (myri10ge_ecrc_enable > 1) {
3066 struct pci_dev *prev_bridge, *old_bridge = bridge;
3068 /* Walk the hierarchy up to the root port
3069 * where ECRC has to be enabled */
3071 prev_bridge = bridge;
3072 bridge = bridge->bus->self;
3073 if (!bridge || prev_bridge == bridge) {
3075 "Failed to find root port"
3076 " to force ECRC\n");
3079 } while (pci_pcie_type(bridge) !=
3080 PCI_EXP_TYPE_ROOT_PORT);
3083 "Forcing ECRC on non-root port %s"
3084 " (enabling on root port %s)\n",
3085 pci_name(old_bridge), pci_name(bridge));
3088 "Not enabling ECRC on non-root port %s\n",
3094 cap = pci_find_ext_capability(bridge, PCI_EXT_CAP_ID_ERR);
3098 ret = pci_read_config_dword(bridge, cap + PCI_ERR_CAP, &err_cap);
3100 dev_err(dev, "failed reading ext-conf-space of %s\n",
3102 dev_err(dev, "\t pci=nommconf in use? "
3103 "or buggy/incomplete/absent ACPI MCFG attr?\n");
3106 if (!(err_cap & PCI_ERR_CAP_ECRC_GENC))
3109 err_cap |= PCI_ERR_CAP_ECRC_GENE;
3110 pci_write_config_dword(bridge, cap + PCI_ERR_CAP, err_cap);
3111 dev_info(dev, "Enabled ECRC on upstream bridge %s\n", pci_name(bridge));
3115 * The Lanai Z8E PCI-E interface achieves higher Read-DMA throughput
3116 * when the PCI-E Completion packets are aligned on an 8-byte
3117 * boundary. Some PCI-E chip sets always align Completion packets; on
3118 * the ones that do not, the alignment can be enforced by enabling
3119 * ECRC generation (if supported).
3121 * When PCI-E Completion packets are not aligned, it is actually more
3122 * efficient to limit Read-DMA transactions to 2KB, rather than 4KB.
3124 * If the driver can neither enable ECRC nor verify that it has
3125 * already been enabled, then it must use a firmware image which works
3126 * around unaligned completion packets (myri10ge_rss_ethp_z8e.dat), and it
3127 * should also ensure that it never gives the device a Read-DMA which is
3128 * larger than 2KB by setting the tx_boundary to 2KB. If ECRC is
3129 * enabled, then the driver should use the aligned (myri10ge_rss_eth_z8e.dat)
3130 * firmware image, and set tx_boundary to 4KB.
3133 static void myri10ge_firmware_probe(struct myri10ge_priv *mgp)
3135 struct pci_dev *pdev = mgp->pdev;
3136 struct device *dev = &pdev->dev;
3139 mgp->tx_boundary = 4096;
3141 * Verify the max read request size was set to 4KB
3142 * before trying the test with 4KB.
3144 status = pcie_get_readrq(pdev);
3146 dev_err(dev, "Couldn't read max read req size: %d\n", status);
3149 if (status != 4096) {
3150 dev_warn(dev, "Max Read Request size != 4096 (%d)\n", status);
3151 mgp->tx_boundary = 2048;
3154 * load the optimized firmware (which assumes aligned PCIe
3155 * completions) in order to see if it works on this host.
3157 set_fw_name(mgp, myri10ge_fw_aligned, false);
3158 status = myri10ge_load_firmware(mgp, 1);
3164 * Enable ECRC if possible
3166 myri10ge_enable_ecrc(mgp);
3169 * Run a DMA test which watches for unaligned completions and
3170 * aborts on the first one seen.
3173 status = myri10ge_dma_test(mgp, MXGEFW_CMD_UNALIGNED_TEST);
3175 return; /* keep the aligned firmware */
3177 if (status != -E2BIG)
3178 dev_warn(dev, "DMA test failed: %d\n", status);
3179 if (status == -ENOSYS)
3180 dev_warn(dev, "Falling back to ethp! "
3181 "Please install up to date fw\n");
3183 /* fall back to using the unaligned firmware */
3184 mgp->tx_boundary = 2048;
3185 set_fw_name(mgp, myri10ge_fw_unaligned, false);
3188 static void myri10ge_select_firmware(struct myri10ge_priv *mgp)
3192 if (myri10ge_force_firmware == 0) {
3196 pcie_capability_read_word(mgp->pdev, PCI_EXP_LNKSTA, &lnk);
3197 link_width = (lnk >> 4) & 0x3f;
3199 /* Check to see if Link is less than 8 or if the
3200 * upstream bridge is known to provide aligned
3202 if (link_width < 8) {
3203 dev_info(&mgp->pdev->dev, "PCIE x%d Link\n",
3205 mgp->tx_boundary = 4096;
3206 set_fw_name(mgp, myri10ge_fw_aligned, false);
3208 myri10ge_firmware_probe(mgp);
3211 if (myri10ge_force_firmware == 1) {
3212 dev_info(&mgp->pdev->dev,
3213 "Assuming aligned completions (forced)\n");
3214 mgp->tx_boundary = 4096;
3215 set_fw_name(mgp, myri10ge_fw_aligned, false);
3217 dev_info(&mgp->pdev->dev,
3218 "Assuming unaligned completions (forced)\n");
3219 mgp->tx_boundary = 2048;
3220 set_fw_name(mgp, myri10ge_fw_unaligned, false);
3224 kparam_block_sysfs_write(myri10ge_fw_name);
3225 if (myri10ge_fw_name != NULL) {
3226 char *fw_name = kstrdup(myri10ge_fw_name, GFP_KERNEL);
3229 set_fw_name(mgp, fw_name, true);
3232 kparam_unblock_sysfs_write(myri10ge_fw_name);
3234 if (mgp->board_number < MYRI10GE_MAX_BOARDS &&
3235 myri10ge_fw_names[mgp->board_number] != NULL &&
3236 strlen(myri10ge_fw_names[mgp->board_number])) {
3237 set_fw_name(mgp, myri10ge_fw_names[mgp->board_number], false);
3241 dev_info(&mgp->pdev->dev, "overriding firmware to %s\n",
3245 static void myri10ge_mask_surprise_down(struct pci_dev *pdev)
3247 struct pci_dev *bridge = pdev->bus->self;
3254 cap = pci_find_ext_capability(bridge, PCI_EXT_CAP_ID_ERR);
3256 /* a sram parity error can cause a surprise link
3257 * down; since we expect and can recover from sram
3258 * parity errors, mask surprise link down events */
3259 pci_read_config_dword(bridge, cap + PCI_ERR_UNCOR_MASK, &mask);
3261 pci_write_config_dword(bridge, cap + PCI_ERR_UNCOR_MASK, mask);
3266 static int myri10ge_suspend(struct pci_dev *pdev, pm_message_t state)
3268 struct myri10ge_priv *mgp;
3269 struct net_device *netdev;
3271 mgp = pci_get_drvdata(pdev);
3276 netif_device_detach(netdev);
3277 if (netif_running(netdev)) {
3278 netdev_info(netdev, "closing\n");
3280 myri10ge_close(netdev);
3283 myri10ge_dummy_rdma(mgp, 0);
3284 pci_save_state(pdev);
3285 pci_disable_device(pdev);
3287 return pci_set_power_state(pdev, pci_choose_state(pdev, state));
3290 static int myri10ge_resume(struct pci_dev *pdev)
3292 struct myri10ge_priv *mgp;
3293 struct net_device *netdev;
3297 mgp = pci_get_drvdata(pdev);
3301 pci_set_power_state(pdev, 0); /* zeros conf space as a side effect */
3302 msleep(5); /* give card time to respond */
3303 pci_read_config_word(mgp->pdev, PCI_VENDOR_ID, &vendor);
3304 if (vendor == 0xffff) {
3305 netdev_err(mgp->dev, "device disappeared!\n");
3309 pci_restore_state(pdev);
3311 status = pci_enable_device(pdev);
3313 dev_err(&pdev->dev, "failed to enable device\n");
3317 pci_set_master(pdev);
3319 myri10ge_reset(mgp);
3320 myri10ge_dummy_rdma(mgp, 1);
3322 /* Save configuration space to be restored if the
3323 * nic resets due to a parity error */
3324 pci_save_state(pdev);
3326 if (netif_running(netdev)) {
3328 status = myri10ge_open(netdev);
3331 goto abort_with_enabled;
3334 netif_device_attach(netdev);
3339 pci_disable_device(pdev);
3343 #endif /* CONFIG_PM */
3345 static u32 myri10ge_read_reboot(struct myri10ge_priv *mgp)
3347 struct pci_dev *pdev = mgp->pdev;
3348 int vs = mgp->vendor_specific_offset;
3351 /*enter read32 mode */
3352 pci_write_config_byte(pdev, vs + 0x10, 0x3);
3354 /*read REBOOT_STATUS (0xfffffff0) */
3355 pci_write_config_dword(pdev, vs + 0x18, 0xfffffff0);
3356 pci_read_config_dword(pdev, vs + 0x14, &reboot);
3361 myri10ge_check_slice(struct myri10ge_slice_state *ss, int *reset_needed,
3362 int *busy_slice_cnt, u32 rx_pause_cnt)
3364 struct myri10ge_priv *mgp = ss->mgp;
3365 int slice = ss - mgp->ss;
3367 if (ss->tx.req != ss->tx.done &&
3368 ss->tx.done == ss->watchdog_tx_done &&
3369 ss->watchdog_tx_req != ss->watchdog_tx_done) {
3370 /* nic seems like it might be stuck.. */
3371 if (rx_pause_cnt != mgp->watchdog_pause) {
3372 if (net_ratelimit())
3373 netdev_warn(mgp->dev, "slice %d: TX paused, "
3374 "check link partner\n", slice);
3376 netdev_warn(mgp->dev,
3377 "slice %d: TX stuck %d %d %d %d %d %d\n",
3378 slice, ss->tx.queue_active, ss->tx.req,
3379 ss->tx.done, ss->tx.pkt_start,
3381 (int)ntohl(mgp->ss[slice].fw_stats->
3387 if (ss->watchdog_tx_done != ss->tx.done ||
3388 ss->watchdog_rx_done != ss->rx_done.cnt) {
3389 *busy_slice_cnt += 1;
3391 ss->watchdog_tx_done = ss->tx.done;
3392 ss->watchdog_tx_req = ss->tx.req;
3393 ss->watchdog_rx_done = ss->rx_done.cnt;
3397 * This watchdog is used to check whether the board has suffered
3398 * from a parity error and needs to be recovered.
3400 static void myri10ge_watchdog(struct work_struct *work)
3402 struct myri10ge_priv *mgp =
3403 container_of(work, struct myri10ge_priv, watchdog_work);
3404 struct myri10ge_slice_state *ss;
3405 u32 reboot, rx_pause_cnt;
3406 int status, rebooted;
3408 int reset_needed = 0;
3409 int busy_slice_cnt = 0;
3412 mgp->watchdog_resets++;
3413 pci_read_config_word(mgp->pdev, PCI_COMMAND, &cmd);
3415 if ((cmd & PCI_COMMAND_MASTER) == 0) {
3416 /* Bus master DMA disabled? Check to see
3417 * if the card rebooted due to a parity error
3418 * For now, just report it */
3419 reboot = myri10ge_read_reboot(mgp);
3420 netdev_err(mgp->dev, "NIC rebooted (0x%x),%s resetting\n",
3421 reboot, myri10ge_reset_recover ? "" : " not");
3422 if (myri10ge_reset_recover == 0)
3427 myri10ge_close(mgp->dev);
3428 myri10ge_reset_recover--;
3431 * A rebooted nic will come back with config space as
3432 * it was after power was applied to PCIe bus.
3433 * Attempt to restore config space which was saved
3434 * when the driver was loaded, or the last time the
3435 * nic was resumed from power saving mode.
3437 pci_restore_state(mgp->pdev);
3439 /* save state again for accounting reasons */
3440 pci_save_state(mgp->pdev);
3443 /* if we get back -1's from our slot, perhaps somebody
3444 * powered off our card. Don't try to reset it in
3446 if (cmd == 0xffff) {
3447 pci_read_config_word(mgp->pdev, PCI_VENDOR_ID, &vendor);
3448 if (vendor == 0xffff) {
3449 netdev_err(mgp->dev, "device disappeared!\n");
3453 /* Perhaps it is a software error. See if stuck slice
3454 * has recovered, reset if not */
3455 rx_pause_cnt = ntohl(mgp->ss[0].fw_stats->dropped_pause);
3456 for (i = 0; i < mgp->num_slices; i++) {
3459 myri10ge_check_slice(ss, &reset_needed,
3465 if (!reset_needed) {
3466 netdev_dbg(mgp->dev, "not resetting\n");
3470 netdev_err(mgp->dev, "device timeout, resetting\n");
3475 myri10ge_close(mgp->dev);
3477 status = myri10ge_load_firmware(mgp, 1);
3479 netdev_err(mgp->dev, "failed to load firmware\n");
3481 myri10ge_open(mgp->dev);
3486 * We use our own timer routine rather than relying upon
3487 * netdev->tx_timeout because we have a very large hardware transmit
3488 * queue. Due to the large queue, the netdev->tx_timeout function
3489 * cannot detect a NIC with a parity error in a timely fashion if the
3490 * NIC is lightly loaded.
3492 static void myri10ge_watchdog_timer(unsigned long arg)
3494 struct myri10ge_priv *mgp;
3495 struct myri10ge_slice_state *ss;
3496 int i, reset_needed, busy_slice_cnt;
3500 mgp = (struct myri10ge_priv *)arg;
3502 rx_pause_cnt = ntohl(mgp->ss[0].fw_stats->dropped_pause);
3504 for (i = 0, reset_needed = 0;
3505 i < mgp->num_slices && reset_needed == 0; ++i) {
3508 if (ss->rx_small.watchdog_needed) {
3509 myri10ge_alloc_rx_pages(mgp, &ss->rx_small,
3510 mgp->small_bytes + MXGEFW_PAD,
3512 if (ss->rx_small.fill_cnt - ss->rx_small.cnt >=
3513 myri10ge_fill_thresh)
3514 ss->rx_small.watchdog_needed = 0;
3516 if (ss->rx_big.watchdog_needed) {
3517 myri10ge_alloc_rx_pages(mgp, &ss->rx_big,
3519 if (ss->rx_big.fill_cnt - ss->rx_big.cnt >=
3520 myri10ge_fill_thresh)
3521 ss->rx_big.watchdog_needed = 0;
3523 myri10ge_check_slice(ss, &reset_needed, &busy_slice_cnt,
3526 /* if we've sent or received no traffic, poll the NIC to
3527 * ensure it is still there. Otherwise, we risk not noticing
3528 * an error in a timely fashion */
3529 if (busy_slice_cnt == 0) {
3530 pci_read_config_word(mgp->pdev, PCI_COMMAND, &cmd);
3531 if ((cmd & PCI_COMMAND_MASTER) == 0) {
3535 mgp->watchdog_pause = rx_pause_cnt;
3538 schedule_work(&mgp->watchdog_work);
3541 mod_timer(&mgp->watchdog_timer,
3542 jiffies + myri10ge_watchdog_timeout * HZ);
3546 static void myri10ge_free_slices(struct myri10ge_priv *mgp)
3548 struct myri10ge_slice_state *ss;
3549 struct pci_dev *pdev = mgp->pdev;
3553 if (mgp->ss == NULL)
3556 for (i = 0; i < mgp->num_slices; i++) {
3558 if (ss->rx_done.entry != NULL) {
3559 bytes = mgp->max_intr_slots *
3560 sizeof(*ss->rx_done.entry);
3561 dma_free_coherent(&pdev->dev, bytes,
3562 ss->rx_done.entry, ss->rx_done.bus);
3563 ss->rx_done.entry = NULL;
3565 if (ss->fw_stats != NULL) {
3566 bytes = sizeof(*ss->fw_stats);
3567 dma_free_coherent(&pdev->dev, bytes,
3568 ss->fw_stats, ss->fw_stats_bus);
3569 ss->fw_stats = NULL;
3571 netif_napi_del(&ss->napi);
3577 static int myri10ge_alloc_slices(struct myri10ge_priv *mgp)
3579 struct myri10ge_slice_state *ss;
3580 struct pci_dev *pdev = mgp->pdev;
3584 bytes = sizeof(*mgp->ss) * mgp->num_slices;
3585 mgp->ss = kzalloc(bytes, GFP_KERNEL);
3586 if (mgp->ss == NULL) {
3590 for (i = 0; i < mgp->num_slices; i++) {
3592 bytes = mgp->max_intr_slots * sizeof(*ss->rx_done.entry);
3593 ss->rx_done.entry = dma_alloc_coherent(&pdev->dev, bytes,
3595 GFP_KERNEL | __GFP_ZERO);
3596 if (ss->rx_done.entry == NULL)
3598 bytes = sizeof(*ss->fw_stats);
3599 ss->fw_stats = dma_alloc_coherent(&pdev->dev, bytes,
3602 if (ss->fw_stats == NULL)
3606 netif_napi_add(ss->dev, &ss->napi, myri10ge_poll,
3607 myri10ge_napi_weight);
3611 myri10ge_free_slices(mgp);
3616 * This function determines the number of slices supported.
3617 * The number slices is the minimum of the number of CPUS,
3618 * the number of MSI-X irqs supported, the number of slices
3619 * supported by the firmware
3621 static void myri10ge_probe_slices(struct myri10ge_priv *mgp)
3623 struct myri10ge_cmd cmd;
3624 struct pci_dev *pdev = mgp->pdev;
3627 int i, status, ncpus, msix_cap;
3629 mgp->num_slices = 1;
3630 msix_cap = pci_find_capability(pdev, PCI_CAP_ID_MSIX);
3631 ncpus = netif_get_num_default_rss_queues();
3633 if (myri10ge_max_slices == 1 || msix_cap == 0 ||
3634 (myri10ge_max_slices == -1 && ncpus < 2))
3637 /* try to load the slice aware rss firmware */
3638 old_fw = mgp->fw_name;
3639 old_allocated = mgp->fw_name_allocated;
3640 /* don't free old_fw if we override it. */
3641 mgp->fw_name_allocated = false;
3643 if (myri10ge_fw_name != NULL) {
3644 dev_info(&mgp->pdev->dev, "overriding rss firmware to %s\n",
3646 set_fw_name(mgp, myri10ge_fw_name, false);
3647 } else if (old_fw == myri10ge_fw_aligned)
3648 set_fw_name(mgp, myri10ge_fw_rss_aligned, false);
3650 set_fw_name(mgp, myri10ge_fw_rss_unaligned, false);
3651 status = myri10ge_load_firmware(mgp, 0);
3653 dev_info(&pdev->dev, "Rss firmware not found\n");
3659 /* hit the board with a reset to ensure it is alive */
3660 memset(&cmd, 0, sizeof(cmd));
3661 status = myri10ge_send_cmd(mgp, MXGEFW_CMD_RESET, &cmd, 0);
3663 dev_err(&mgp->pdev->dev, "failed reset\n");
3667 mgp->max_intr_slots = cmd.data0 / sizeof(struct mcp_slot);
3669 /* tell it the size of the interrupt queues */
3670 cmd.data0 = mgp->max_intr_slots * sizeof(struct mcp_slot);
3671 status = myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_INTRQ_SIZE, &cmd, 0);
3673 dev_err(&mgp->pdev->dev, "failed MXGEFW_CMD_SET_INTRQ_SIZE\n");
3677 /* ask the maximum number of slices it supports */
3678 status = myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_MAX_RSS_QUEUES, &cmd, 0);
3682 mgp->num_slices = cmd.data0;
3684 /* Only allow multiple slices if MSI-X is usable */
3685 if (!myri10ge_msi) {
3689 /* if the admin did not specify a limit to how many
3690 * slices we should use, cap it automatically to the
3691 * number of CPUs currently online */
3692 if (myri10ge_max_slices == -1)
3693 myri10ge_max_slices = ncpus;
3695 if (mgp->num_slices > myri10ge_max_slices)
3696 mgp->num_slices = myri10ge_max_slices;
3698 /* Now try to allocate as many MSI-X vectors as we have
3699 * slices. We give up on MSI-X if we can only get a single
3702 mgp->msix_vectors = kcalloc(mgp->num_slices, sizeof(*mgp->msix_vectors),
3704 if (mgp->msix_vectors == NULL)
3706 for (i = 0; i < mgp->num_slices; i++) {
3707 mgp->msix_vectors[i].entry = i;
3710 while (mgp->num_slices > 1) {
3711 /* make sure it is a power of two */
3712 while (!is_power_of_2(mgp->num_slices))
3714 if (mgp->num_slices == 1)
3716 status = pci_enable_msix(pdev, mgp->msix_vectors,
3719 pci_disable_msix(pdev);
3725 mgp->num_slices = status;
3731 if (mgp->msix_vectors != NULL) {
3732 kfree(mgp->msix_vectors);
3733 mgp->msix_vectors = NULL;
3737 mgp->num_slices = 1;
3738 set_fw_name(mgp, old_fw, old_allocated);
3739 myri10ge_load_firmware(mgp, 0);
3742 static const struct net_device_ops myri10ge_netdev_ops = {
3743 .ndo_open = myri10ge_open,
3744 .ndo_stop = myri10ge_close,
3745 .ndo_start_xmit = myri10ge_xmit,
3746 .ndo_get_stats64 = myri10ge_get_stats,
3747 .ndo_validate_addr = eth_validate_addr,
3748 .ndo_change_mtu = myri10ge_change_mtu,
3749 .ndo_set_rx_mode = myri10ge_set_multicast_list,
3750 .ndo_set_mac_address = myri10ge_set_mac_address,
3753 static int myri10ge_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
3755 struct net_device *netdev;
3756 struct myri10ge_priv *mgp;
3757 struct device *dev = &pdev->dev;
3759 int status = -ENXIO;
3761 unsigned hdr_offset, ss_offset;
3762 static int board_number;
3764 netdev = alloc_etherdev_mq(sizeof(*mgp), MYRI10GE_MAX_SLICES);
3768 SET_NETDEV_DEV(netdev, &pdev->dev);
3770 mgp = netdev_priv(netdev);
3773 mgp->pause = myri10ge_flow_control;
3774 mgp->intr_coal_delay = myri10ge_intr_coal_delay;
3775 mgp->msg_enable = netif_msg_init(myri10ge_debug, MYRI10GE_MSG_DEFAULT);
3776 mgp->board_number = board_number;
3777 init_waitqueue_head(&mgp->down_wq);
3779 if (pci_enable_device(pdev)) {
3780 dev_err(&pdev->dev, "pci_enable_device call failed\n");
3782 goto abort_with_netdev;
3785 /* Find the vendor-specific cap so we can check
3786 * the reboot register later on */
3787 mgp->vendor_specific_offset
3788 = pci_find_capability(pdev, PCI_CAP_ID_VNDR);
3790 /* Set our max read request to 4KB */
3791 status = pcie_set_readrq(pdev, 4096);
3793 dev_err(&pdev->dev, "Error %d writing PCI_EXP_DEVCTL\n",
3795 goto abort_with_enabled;
3798 myri10ge_mask_surprise_down(pdev);
3799 pci_set_master(pdev);
3801 status = pci_set_dma_mask(pdev, DMA_BIT_MASK(64));
3805 "64-bit pci address mask was refused, "
3807 status = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
3810 dev_err(&pdev->dev, "Error %d setting DMA mask\n", status);
3811 goto abort_with_enabled;
3813 (void)pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64));
3814 mgp->cmd = dma_alloc_coherent(&pdev->dev, sizeof(*mgp->cmd),
3815 &mgp->cmd_bus, GFP_KERNEL);
3816 if (mgp->cmd == NULL)
3817 goto abort_with_enabled;
3819 mgp->board_span = pci_resource_len(pdev, 0);
3820 mgp->iomem_base = pci_resource_start(pdev, 0);
3822 mgp->wc_enabled = 0;
3824 mgp->mtrr = mtrr_add(mgp->iomem_base, mgp->board_span,
3825 MTRR_TYPE_WRCOMB, 1);
3827 mgp->wc_enabled = 1;
3829 mgp->sram = ioremap_wc(mgp->iomem_base, mgp->board_span);
3830 if (mgp->sram == NULL) {
3831 dev_err(&pdev->dev, "ioremap failed for %ld bytes at 0x%lx\n",
3832 mgp->board_span, mgp->iomem_base);
3834 goto abort_with_mtrr;
3837 swab32(readl(mgp->sram + MCP_HEADER_PTR_OFFSET)) & 0xffffc;
3838 ss_offset = hdr_offset + offsetof(struct mcp_gen_header, string_specs);
3839 mgp->sram_size = swab32(readl(mgp->sram + ss_offset));
3840 if (mgp->sram_size > mgp->board_span ||
3841 mgp->sram_size <= MYRI10GE_FW_OFFSET) {
3843 "invalid sram_size %dB or board span %ldB\n",
3844 mgp->sram_size, mgp->board_span);
3845 goto abort_with_ioremap;
3847 memcpy_fromio(mgp->eeprom_strings,
3848 mgp->sram + mgp->sram_size, MYRI10GE_EEPROM_STRINGS_SIZE);
3849 memset(mgp->eeprom_strings + MYRI10GE_EEPROM_STRINGS_SIZE - 2, 0, 2);
3850 status = myri10ge_read_mac_addr(mgp);
3852 goto abort_with_ioremap;
3854 for (i = 0; i < ETH_ALEN; i++)
3855 netdev->dev_addr[i] = mgp->mac_addr[i];
3857 myri10ge_select_firmware(mgp);
3859 status = myri10ge_load_firmware(mgp, 1);
3861 dev_err(&pdev->dev, "failed to load firmware\n");
3862 goto abort_with_ioremap;
3864 myri10ge_probe_slices(mgp);
3865 status = myri10ge_alloc_slices(mgp);
3867 dev_err(&pdev->dev, "failed to alloc slice state\n");
3868 goto abort_with_firmware;
3870 netif_set_real_num_tx_queues(netdev, mgp->num_slices);
3871 netif_set_real_num_rx_queues(netdev, mgp->num_slices);
3872 status = myri10ge_reset(mgp);
3874 dev_err(&pdev->dev, "failed reset\n");
3875 goto abort_with_slices;
3877 #ifdef CONFIG_MYRI10GE_DCA
3878 myri10ge_setup_dca(mgp);
3880 pci_set_drvdata(pdev, mgp);
3881 if ((myri10ge_initial_mtu + ETH_HLEN) > MYRI10GE_MAX_ETHER_MTU)
3882 myri10ge_initial_mtu = MYRI10GE_MAX_ETHER_MTU - ETH_HLEN;
3883 if ((myri10ge_initial_mtu + ETH_HLEN) < 68)
3884 myri10ge_initial_mtu = 68;
3886 netdev->netdev_ops = &myri10ge_netdev_ops;
3887 netdev->mtu = myri10ge_initial_mtu;
3888 netdev->hw_features = mgp->features | NETIF_F_RXCSUM;
3890 /* fake NETIF_F_HW_VLAN_RX for good GRO performance */
3891 netdev->hw_features |= NETIF_F_HW_VLAN_RX;
3893 netdev->features = netdev->hw_features;
3896 netdev->features |= NETIF_F_HIGHDMA;
3898 netdev->vlan_features |= mgp->features;
3899 if (mgp->fw_ver_tiny < 37)
3900 netdev->vlan_features &= ~NETIF_F_TSO6;
3901 if (mgp->fw_ver_tiny < 32)
3902 netdev->vlan_features &= ~NETIF_F_TSO;
3904 /* make sure we can get an irq, and that MSI can be
3905 * setup (if available). */
3906 status = myri10ge_request_irq(mgp);
3908 goto abort_with_firmware;
3909 myri10ge_free_irq(mgp);
3911 /* Save configuration space to be restored if the
3912 * nic resets due to a parity error */
3913 pci_save_state(pdev);
3915 /* Setup the watchdog timer */
3916 setup_timer(&mgp->watchdog_timer, myri10ge_watchdog_timer,
3917 (unsigned long)mgp);
3919 SET_ETHTOOL_OPS(netdev, &myri10ge_ethtool_ops);
3920 INIT_WORK(&mgp->watchdog_work, myri10ge_watchdog);
3921 status = register_netdev(netdev);
3923 dev_err(&pdev->dev, "register_netdev failed: %d\n", status);
3924 goto abort_with_state;
3926 if (mgp->msix_enabled)
3927 dev_info(dev, "%d MSI-X IRQs, tx bndry %d, fw %s, WC %s\n",
3928 mgp->num_slices, mgp->tx_boundary, mgp->fw_name,
3929 (mgp->wc_enabled ? "Enabled" : "Disabled"));
3931 dev_info(dev, "%s IRQ %d, tx bndry %d, fw %s, WC %s\n",
3932 mgp->msi_enabled ? "MSI" : "xPIC",
3933 pdev->irq, mgp->tx_boundary, mgp->fw_name,
3934 (mgp->wc_enabled ? "Enabled" : "Disabled"));
3940 pci_restore_state(pdev);
3943 myri10ge_free_slices(mgp);
3945 abort_with_firmware:
3946 myri10ge_dummy_rdma(mgp, 0);
3949 if (mgp->mac_addr_string != NULL)
3951 "myri10ge_probe() failed: MAC=%s, SN=%ld\n",
3952 mgp->mac_addr_string, mgp->serial_number);
3958 mtrr_del(mgp->mtrr, mgp->iomem_base, mgp->board_span);
3960 dma_free_coherent(&pdev->dev, sizeof(*mgp->cmd),
3961 mgp->cmd, mgp->cmd_bus);
3964 pci_disable_device(pdev);
3967 set_fw_name(mgp, NULL, false);
3968 free_netdev(netdev);
3975 * Does what is necessary to shutdown one Myrinet device. Called
3976 * once for each Myrinet card by the kernel when a module is
3979 static void myri10ge_remove(struct pci_dev *pdev)
3981 struct myri10ge_priv *mgp;
3982 struct net_device *netdev;
3984 mgp = pci_get_drvdata(pdev);
3988 cancel_work_sync(&mgp->watchdog_work);
3990 unregister_netdev(netdev);
3992 #ifdef CONFIG_MYRI10GE_DCA
3993 myri10ge_teardown_dca(mgp);
3995 myri10ge_dummy_rdma(mgp, 0);
3997 /* avoid a memory leak */
3998 pci_restore_state(pdev);
4004 mtrr_del(mgp->mtrr, mgp->iomem_base, mgp->board_span);
4006 myri10ge_free_slices(mgp);
4007 if (mgp->msix_vectors != NULL)
4008 kfree(mgp->msix_vectors);
4009 dma_free_coherent(&pdev->dev, sizeof(*mgp->cmd),
4010 mgp->cmd, mgp->cmd_bus);
4012 set_fw_name(mgp, NULL, false);
4013 free_netdev(netdev);
4014 pci_disable_device(pdev);
4015 pci_set_drvdata(pdev, NULL);
4018 #define PCI_DEVICE_ID_MYRICOM_MYRI10GE_Z8E 0x0008
4019 #define PCI_DEVICE_ID_MYRICOM_MYRI10GE_Z8E_9 0x0009
4021 static DEFINE_PCI_DEVICE_TABLE(myri10ge_pci_tbl) = {
4022 {PCI_DEVICE(PCI_VENDOR_ID_MYRICOM, PCI_DEVICE_ID_MYRICOM_MYRI10GE_Z8E)},
4024 (PCI_VENDOR_ID_MYRICOM, PCI_DEVICE_ID_MYRICOM_MYRI10GE_Z8E_9)},
4028 MODULE_DEVICE_TABLE(pci, myri10ge_pci_tbl);
4030 static struct pci_driver myri10ge_driver = {
4032 .probe = myri10ge_probe,
4033 .remove = myri10ge_remove,
4034 .id_table = myri10ge_pci_tbl,
4036 .suspend = myri10ge_suspend,
4037 .resume = myri10ge_resume,
4041 #ifdef CONFIG_MYRI10GE_DCA
4043 myri10ge_notify_dca(struct notifier_block *nb, unsigned long event, void *p)
4045 int err = driver_for_each_device(&myri10ge_driver.driver,
4047 myri10ge_notify_dca_device);
4054 static struct notifier_block myri10ge_dca_notifier = {
4055 .notifier_call = myri10ge_notify_dca,
4059 #endif /* CONFIG_MYRI10GE_DCA */
4061 static __init int myri10ge_init_module(void)
4063 pr_info("Version %s\n", MYRI10GE_VERSION_STR);
4065 if (myri10ge_rss_hash > MXGEFW_RSS_HASH_TYPE_MAX) {
4066 pr_err("Illegal rssh hash type %d, defaulting to source port\n",
4068 myri10ge_rss_hash = MXGEFW_RSS_HASH_TYPE_SRC_PORT;
4070 #ifdef CONFIG_MYRI10GE_DCA
4071 dca_register_notify(&myri10ge_dca_notifier);
4073 if (myri10ge_max_slices > MYRI10GE_MAX_SLICES)
4074 myri10ge_max_slices = MYRI10GE_MAX_SLICES;
4076 return pci_register_driver(&myri10ge_driver);
4079 module_init(myri10ge_init_module);
4081 static __exit void myri10ge_cleanup_module(void)
4083 #ifdef CONFIG_MYRI10GE_DCA
4084 dca_unregister_notify(&myri10ge_dca_notifier);
4086 pci_unregister_driver(&myri10ge_driver);
4089 module_exit(myri10ge_cleanup_module);