1 /* epic100.c: A SMC 83c170 EPIC/100 Fast Ethernet driver for Linux. */
3 Written/copyright 1997-2001 by Donald Becker.
5 This software may be used and distributed according to the terms of
6 the GNU General Public License (GPL), incorporated herein by reference.
7 Drivers based on or derived from this code fall under the GPL and must
8 retain the authorship, copyright and license notice. This file is not
9 a complete program and may only be used when the entire operating
10 system is licensed under the GPL.
12 This driver is for the SMC83c170/175 "EPIC" series, as used on the
13 SMC EtherPower II 9432 PCI adapter, and several CardBus cards.
15 The author may be reached as becker@scyld.com, or C/O
16 Scyld Computing Corporation
17 410 Severn Ave., Suite 210
20 Information and updates available at
21 http://www.scyld.com/network/epic100.html
22 [this link no longer provides anything useful -jgarzik]
24 ---------------------------------------------------------------------
28 #define DRV_NAME "epic100"
29 #define DRV_VERSION "2.1"
30 #define DRV_RELDATE "Sept 11, 2006"
32 /* The user-configurable values.
33 These may be modified when a driver module is loaded.*/
35 static int debug = 1; /* 1 normal messages, 0 quiet .. 7 verbose. */
37 /* Used to pass the full-duplex flag, etc. */
38 #define MAX_UNITS 8 /* More are supported, limit only on options */
39 static int options[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1};
40 static int full_duplex[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1};
42 /* Set the copy breakpoint for the copy-only-tiny-frames scheme.
43 Setting to > 1518 effectively disables this feature. */
44 static int rx_copybreak;
46 /* Operational parameters that are set at compile time. */
48 /* Keep the ring sizes a power of two for operational efficiency.
49 The compiler will convert <unsigned>'%'<2^N> into a bit mask.
50 Making the Tx ring too large decreases the effectiveness of channel
51 bonding and packet priority.
52 There are no ill effects from too-large receive rings. */
53 #define TX_RING_SIZE 256
54 #define TX_QUEUE_LEN 240 /* Limit ring entries actually used. */
55 #define RX_RING_SIZE 256
56 #define TX_TOTAL_SIZE TX_RING_SIZE*sizeof(struct epic_tx_desc)
57 #define RX_TOTAL_SIZE RX_RING_SIZE*sizeof(struct epic_rx_desc)
59 /* Operational parameters that usually are not changed. */
60 /* Time in jiffies before concluding the transmitter is hung. */
61 #define TX_TIMEOUT (2*HZ)
63 #define PKT_BUF_SZ 1536 /* Size of each temporary Rx buffer.*/
65 /* Bytes transferred to chip before transmission starts. */
66 /* Initial threshold, increased on underflow, rounded down to 4 byte units. */
67 #define TX_FIFO_THRESH 256
68 #define RX_FIFO_THRESH 1 /* 0-3, 0==32, 64,96, or 3==128 bytes */
70 #include <linux/module.h>
71 #include <linux/kernel.h>
72 #include <linux/string.h>
73 #include <linux/timer.h>
74 #include <linux/errno.h>
75 #include <linux/ioport.h>
76 #include <linux/interrupt.h>
77 #include <linux/pci.h>
78 #include <linux/delay.h>
79 #include <linux/netdevice.h>
80 #include <linux/etherdevice.h>
81 #include <linux/skbuff.h>
82 #include <linux/init.h>
83 #include <linux/spinlock.h>
84 #include <linux/ethtool.h>
85 #include <linux/mii.h>
86 #include <linux/crc32.h>
87 #include <linux/bitops.h>
89 #include <asm/uaccess.h>
90 #include <asm/byteorder.h>
92 /* These identify the driver base version and may not be removed. */
93 static char version[] =
94 DRV_NAME ".c:v1.11 1/7/2001 Written by Donald Becker <becker@scyld.com>\n";
95 static char version2[] =
96 " (unofficial 2.4.x kernel port, version " DRV_VERSION ", " DRV_RELDATE ")\n";
98 MODULE_AUTHOR("Donald Becker <becker@scyld.com>");
99 MODULE_DESCRIPTION("SMC 83c170 EPIC series Ethernet driver");
100 MODULE_LICENSE("GPL");
102 module_param(debug, int, 0);
103 module_param(rx_copybreak, int, 0);
104 module_param_array(options, int, NULL, 0);
105 module_param_array(full_duplex, int, NULL, 0);
106 MODULE_PARM_DESC(debug, "EPIC/100 debug level (0-5)");
107 MODULE_PARM_DESC(options, "EPIC/100: Bits 0-3: media type, bit 4: full duplex");
108 MODULE_PARM_DESC(rx_copybreak, "EPIC/100 copy breakpoint for copy-only-tiny-frames");
109 MODULE_PARM_DESC(full_duplex, "EPIC/100 full duplex setting(s) (1)");
114 I. Board Compatibility
116 This device driver is designed for the SMC "EPIC/100", the SMC
117 single-chip Ethernet controllers for PCI. This chip is used on
118 the SMC EtherPower II boards.
120 II. Board-specific settings
122 PCI bus devices are configured by the system at boot time, so no jumpers
123 need to be set on the board. The system BIOS will assign the
124 PCI INTA signal to a (preferably otherwise unused) system IRQ line.
125 Note: Kernel versions earlier than 1.3.73 do not support shared PCI
128 III. Driver operation
134 http://www.smsc.com/media/Downloads_Public/discontinued/83c171.pdf
135 http://www.smsc.com/media/Downloads_Public/discontinued/83c175.pdf
136 http://scyld.com/expert/NWay.html
137 http://www.national.com/pf/DP/DP83840A.html
144 enum chip_capability_flags { MII_PWRDWN=1, TYPE2_INTR=2, NO_MII=4 };
146 #define EPIC_TOTAL_SIZE 0x100
162 struct epic_chip_info {
164 int drv_flags; /* Driver use, intended as capability flags. */
168 /* indexed by chip_t */
169 static const struct epic_chip_info pci_id_tbl[] = {
170 { "SMSC EPIC/100 83c170", TYPE2_INTR | NO_MII | MII_PWRDWN },
171 { "SMSC EPIC/100 83c170", TYPE2_INTR },
172 { "SMSC EPIC/C 83c175", TYPE2_INTR | MII_PWRDWN },
176 static DEFINE_PCI_DEVICE_TABLE(epic_pci_tbl) = {
177 { 0x10B8, 0x0005, 0x1092, 0x0AB4, 0, 0, SMSC_83C170_0 },
178 { 0x10B8, 0x0005, PCI_ANY_ID, PCI_ANY_ID, 0, 0, SMSC_83C170 },
179 { 0x10B8, 0x0006, PCI_ANY_ID, PCI_ANY_ID,
180 PCI_CLASS_NETWORK_ETHERNET << 8, 0xffff00, SMSC_83C175 },
183 MODULE_DEVICE_TABLE (pci, epic_pci_tbl);
185 #define ew16(reg, val) iowrite16(val, ioaddr + (reg))
186 #define ew32(reg, val) iowrite32(val, ioaddr + (reg))
187 #define er8(reg) ioread8(ioaddr + (reg))
188 #define er16(reg) ioread16(ioaddr + (reg))
189 #define er32(reg) ioread32(ioaddr + (reg))
191 /* Offsets to registers, using the (ugh) SMC names. */
192 enum epic_registers {
193 COMMAND=0, INTSTAT=4, INTMASK=8, GENCTL=0x0C, NVCTL=0x10, EECTL=0x14,
195 TEST1=0x1C, CRCCNT=0x20, ALICNT=0x24, MPCNT=0x28, /* Rx error counters. */
196 MIICtrl=0x30, MIIData=0x34, MIICfg=0x38,
197 LAN0=64, /* MAC address. */
198 MC0=80, /* Multicast filter table. */
199 RxCtrl=96, TxCtrl=112, TxSTAT=0x74,
200 PRxCDAR=0x84, RxSTAT=0xA4, EarlyRx=0xB0, PTxCDAR=0xC4, TxThresh=0xDC,
203 /* Interrupt register bits, using my own meaningful names. */
205 TxIdle=0x40000, RxIdle=0x20000, IntrSummary=0x010000,
206 PCIBusErr170=0x7000, PCIBusErr175=0x1000, PhyEvent175=0x8000,
207 RxStarted=0x0800, RxEarlyWarn=0x0400, CntFull=0x0200, TxUnderrun=0x0100,
208 TxEmpty=0x0080, TxDone=0x0020, RxError=0x0010,
209 RxOverflow=0x0008, RxFull=0x0004, RxHeader=0x0002, RxDone=0x0001,
212 StopRx=1, StartRx=2, TxQueued=4, RxQueued=8,
213 StopTxDMA=0x20, StopRxDMA=0x40, RestartTx=0x80,
216 #define EpicRemoved 0xffffffff /* Chip failed or removed (CardBus) */
218 #define EpicNapiEvent (TxEmpty | TxDone | \
219 RxDone | RxStarted | RxEarlyWarn | RxOverflow | RxFull)
220 #define EpicNormalEvent (0x0000ffff & ~EpicNapiEvent)
222 static const u16 media2miictl[16] = {
223 0, 0x0C00, 0x0C00, 0x2000, 0x0100, 0x2100, 0, 0,
224 0, 0, 0, 0, 0, 0, 0, 0 };
227 * The EPIC100 Rx and Tx buffer descriptors. Note that these
228 * really ARE host-endian; it's not a misannotation. We tell
229 * the card to byteswap them internally on big-endian hosts -
230 * look for #ifdef __BIG_ENDIAN in epic_open().
233 struct epic_tx_desc {
240 struct epic_rx_desc {
247 enum desc_status_bits {
251 #define PRIV_ALIGN 15 /* Required alignment mask */
252 struct epic_private {
253 struct epic_rx_desc *rx_ring;
254 struct epic_tx_desc *tx_ring;
255 /* The saved address of a sent-in-place packet/buffer, for skfree(). */
256 struct sk_buff* tx_skbuff[TX_RING_SIZE];
257 /* The addresses of receive-in-place skbuffs. */
258 struct sk_buff* rx_skbuff[RX_RING_SIZE];
260 dma_addr_t tx_ring_dma;
261 dma_addr_t rx_ring_dma;
264 spinlock_t lock; /* Group with Tx control cache line. */
265 spinlock_t napi_lock;
266 struct napi_struct napi;
267 unsigned int reschedule_in_poll;
268 unsigned int cur_tx, dirty_tx;
270 unsigned int cur_rx, dirty_rx;
272 unsigned int rx_buf_sz; /* Based on MTU+slack. */
274 void __iomem *ioaddr;
275 struct pci_dev *pci_dev; /* PCI bus location. */
276 int chip_id, chip_flags;
278 struct timer_list timer; /* Media selection timer. */
280 unsigned char mc_filter[8];
281 signed char phys[4]; /* MII device addresses. */
282 u16 advertising; /* NWay media advertisement */
284 struct mii_if_info mii;
285 unsigned int tx_full:1; /* The Tx queue is full. */
286 unsigned int default_port:4; /* Last dev->if_port value. */
289 static int epic_open(struct net_device *dev);
290 static int read_eeprom(struct epic_private *, int);
291 static int mdio_read(struct net_device *dev, int phy_id, int location);
292 static void mdio_write(struct net_device *dev, int phy_id, int loc, int val);
293 static void epic_restart(struct net_device *dev);
294 static void epic_timer(unsigned long data);
295 static void epic_tx_timeout(struct net_device *dev);
296 static void epic_init_ring(struct net_device *dev);
297 static netdev_tx_t epic_start_xmit(struct sk_buff *skb,
298 struct net_device *dev);
299 static int epic_rx(struct net_device *dev, int budget);
300 static int epic_poll(struct napi_struct *napi, int budget);
301 static irqreturn_t epic_interrupt(int irq, void *dev_instance);
302 static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
303 static const struct ethtool_ops netdev_ethtool_ops;
304 static int epic_close(struct net_device *dev);
305 static struct net_device_stats *epic_get_stats(struct net_device *dev);
306 static void set_rx_mode(struct net_device *dev);
308 static const struct net_device_ops epic_netdev_ops = {
309 .ndo_open = epic_open,
310 .ndo_stop = epic_close,
311 .ndo_start_xmit = epic_start_xmit,
312 .ndo_tx_timeout = epic_tx_timeout,
313 .ndo_get_stats = epic_get_stats,
314 .ndo_set_rx_mode = set_rx_mode,
315 .ndo_do_ioctl = netdev_ioctl,
316 .ndo_change_mtu = eth_change_mtu,
317 .ndo_set_mac_address = eth_mac_addr,
318 .ndo_validate_addr = eth_validate_addr,
321 static int epic_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
323 static int card_idx = -1;
324 void __iomem *ioaddr;
325 int chip_idx = (int) ent->driver_data;
327 struct net_device *dev;
328 struct epic_private *ep;
329 int i, ret, option = 0, duplex = 0;
333 /* when built into the kernel, we only print version if device is found */
335 static int printed_version;
336 if (!printed_version++)
337 printk(KERN_INFO "%s%s", version, version2);
342 ret = pci_enable_device(pdev);
347 if (pci_resource_len(pdev, 0) < EPIC_TOTAL_SIZE) {
348 dev_err(&pdev->dev, "no PCI region space\n");
350 goto err_out_disable;
353 pci_set_master(pdev);
355 ret = pci_request_regions(pdev, DRV_NAME);
357 goto err_out_disable;
361 dev = alloc_etherdev(sizeof (*ep));
363 goto err_out_free_res;
365 SET_NETDEV_DEV(dev, &pdev->dev);
367 ioaddr = pci_iomap(pdev, EPIC_BAR, 0);
369 dev_err(&pdev->dev, "ioremap failed\n");
370 goto err_out_free_netdev;
373 pci_set_drvdata(pdev, dev);
374 ep = netdev_priv(dev);
377 ep->mii.mdio_read = mdio_read;
378 ep->mii.mdio_write = mdio_write;
379 ep->mii.phy_id_mask = 0x1f;
380 ep->mii.reg_num_mask = 0x1f;
382 ring_space = pci_alloc_consistent(pdev, TX_TOTAL_SIZE, &ring_dma);
384 goto err_out_iounmap;
385 ep->tx_ring = ring_space;
386 ep->tx_ring_dma = ring_dma;
388 ring_space = pci_alloc_consistent(pdev, RX_TOTAL_SIZE, &ring_dma);
390 goto err_out_unmap_tx;
391 ep->rx_ring = ring_space;
392 ep->rx_ring_dma = ring_dma;
394 if (dev->mem_start) {
395 option = dev->mem_start;
396 duplex = (dev->mem_start & 16) ? 1 : 0;
397 } else if (card_idx >= 0 && card_idx < MAX_UNITS) {
398 if (options[card_idx] >= 0)
399 option = options[card_idx];
400 if (full_duplex[card_idx] >= 0)
401 duplex = full_duplex[card_idx];
404 spin_lock_init(&ep->lock);
405 spin_lock_init(&ep->napi_lock);
406 ep->reschedule_in_poll = 0;
408 /* Bring the chip out of low-power mode. */
409 ew32(GENCTL, 0x4200);
410 /* Magic?! If we don't set this bit the MII interface won't work. */
411 /* This magic is documented in SMSC app note 7.15 */
412 for (i = 16; i > 0; i--)
415 /* Turn on the MII transceiver. */
418 ew32(NVCTL, (er32(NVCTL) & ~0x003c) | 0x4800);
419 ew32(GENCTL, 0x0200);
421 /* Note: the '175 does not have a serial EEPROM. */
422 for (i = 0; i < 3; i++)
423 ((__le16 *)dev->dev_addr)[i] = cpu_to_le16(er16(LAN0 + i*4));
426 dev_printk(KERN_DEBUG, &pdev->dev, "EEPROM contents:\n");
427 for (i = 0; i < 64; i++)
428 printk(" %4.4x%s", read_eeprom(ep, i),
429 i % 16 == 15 ? "\n" : "");
433 ep->chip_id = chip_idx;
434 ep->chip_flags = pci_id_tbl[chip_idx].drv_flags;
436 (ep->chip_flags & TYPE2_INTR ? PCIBusErr175 : PCIBusErr170)
437 | CntFull | TxUnderrun | EpicNapiEvent;
439 /* Find the connected MII xcvrs.
440 Doing this in open() would allow detecting external xcvrs later, but
441 takes much time and no cards have external MII. */
443 int phy, phy_idx = 0;
444 for (phy = 1; phy < 32 && phy_idx < sizeof(ep->phys); phy++) {
445 int mii_status = mdio_read(dev, phy, MII_BMSR);
446 if (mii_status != 0xffff && mii_status != 0x0000) {
447 ep->phys[phy_idx++] = phy;
449 "MII transceiver #%d control "
450 "%4.4x status %4.4x.\n",
451 phy, mdio_read(dev, phy, 0), mii_status);
454 ep->mii_phy_cnt = phy_idx;
457 ep->mii.advertising = mdio_read(dev, phy, MII_ADVERTISE);
459 "Autonegotiation advertising %4.4x link "
461 ep->mii.advertising, mdio_read(dev, phy, 5));
462 } else if ( ! (ep->chip_flags & NO_MII)) {
464 "***WARNING***: No MII transceiver found!\n");
465 /* Use the known PHY address of the EPII. */
468 ep->mii.phy_id = ep->phys[0];
471 /* Turn off the MII xcvr (175 only!), leave the chip in low-power mode. */
472 if (ep->chip_flags & MII_PWRDWN)
473 ew32(NVCTL, er32(NVCTL) & ~0x483c);
474 ew32(GENCTL, 0x0008);
476 /* The lower four bits are the media type. */
478 ep->mii.force_media = ep->mii.full_duplex = 1;
479 dev_info(&pdev->dev, "Forced full duplex requested.\n");
481 dev->if_port = ep->default_port = option;
483 /* The Epic-specific entries in the device structure. */
484 dev->netdev_ops = &epic_netdev_ops;
485 dev->ethtool_ops = &netdev_ethtool_ops;
486 dev->watchdog_timeo = TX_TIMEOUT;
487 netif_napi_add(dev, &ep->napi, epic_poll, 64);
489 ret = register_netdev(dev);
491 goto err_out_unmap_rx;
493 printk(KERN_INFO "%s: %s at %lx, IRQ %d, %pM\n",
494 dev->name, pci_id_tbl[chip_idx].name,
495 (long)pci_resource_start(pdev, EPIC_BAR), pdev->irq,
502 pci_free_consistent(pdev, RX_TOTAL_SIZE, ep->rx_ring, ep->rx_ring_dma);
504 pci_free_consistent(pdev, TX_TOTAL_SIZE, ep->tx_ring, ep->tx_ring_dma);
506 pci_iounmap(pdev, ioaddr);
510 pci_release_regions(pdev);
512 pci_disable_device(pdev);
516 /* Serial EEPROM section. */
518 /* EEPROM_Ctrl bits. */
519 #define EE_SHIFT_CLK 0x04 /* EEPROM shift clock. */
520 #define EE_CS 0x02 /* EEPROM chip select. */
521 #define EE_DATA_WRITE 0x08 /* EEPROM chip data in. */
522 #define EE_WRITE_0 0x01
523 #define EE_WRITE_1 0x09
524 #define EE_DATA_READ 0x10 /* EEPROM chip data out. */
525 #define EE_ENB (0x0001 | EE_CS)
527 /* Delay between EEPROM clock transitions.
528 This serves to flush the operation to the PCI bus.
531 #define eeprom_delay() er32(EECTL)
533 /* The EEPROM commands include the alway-set leading bit. */
534 #define EE_WRITE_CMD (5 << 6)
535 #define EE_READ64_CMD (6 << 6)
536 #define EE_READ256_CMD (6 << 8)
537 #define EE_ERASE_CMD (7 << 6)
539 static void epic_disable_int(struct net_device *dev, struct epic_private *ep)
541 void __iomem *ioaddr = ep->ioaddr;
543 ew32(INTMASK, 0x00000000);
546 static inline void __epic_pci_commit(void __iomem *ioaddr)
553 static inline void epic_napi_irq_off(struct net_device *dev,
554 struct epic_private *ep)
556 void __iomem *ioaddr = ep->ioaddr;
558 ew32(INTMASK, ep->irq_mask & ~EpicNapiEvent);
559 __epic_pci_commit(ioaddr);
562 static inline void epic_napi_irq_on(struct net_device *dev,
563 struct epic_private *ep)
565 void __iomem *ioaddr = ep->ioaddr;
567 /* No need to commit possible posted write */
568 ew32(INTMASK, ep->irq_mask | EpicNapiEvent);
571 static int read_eeprom(struct epic_private *ep, int location)
573 void __iomem *ioaddr = ep->ioaddr;
576 int read_cmd = location |
577 (er32(EECTL) & 0x40 ? EE_READ64_CMD : EE_READ256_CMD);
579 ew32(EECTL, EE_ENB & ~EE_CS);
582 /* Shift the read command bits out. */
583 for (i = 12; i >= 0; i--) {
584 short dataval = (read_cmd & (1 << i)) ? EE_WRITE_1 : EE_WRITE_0;
585 ew32(EECTL, EE_ENB | dataval);
587 ew32(EECTL, EE_ENB | dataval | EE_SHIFT_CLK);
592 for (i = 16; i > 0; i--) {
593 ew32(EECTL, EE_ENB | EE_SHIFT_CLK);
595 retval = (retval << 1) | ((er32(EECTL) & EE_DATA_READ) ? 1 : 0);
600 /* Terminate the EEPROM access. */
601 ew32(EECTL, EE_ENB & ~EE_CS);
606 #define MII_WRITEOP 2
607 static int mdio_read(struct net_device *dev, int phy_id, int location)
609 struct epic_private *ep = netdev_priv(dev);
610 void __iomem *ioaddr = ep->ioaddr;
611 int read_cmd = (phy_id << 9) | (location << 4) | MII_READOP;
614 ew32(MIICtrl, read_cmd);
615 /* Typical operation takes 25 loops. */
616 for (i = 400; i > 0; i--) {
618 if ((er32(MIICtrl) & MII_READOP) == 0) {
619 /* Work around read failure bug. */
620 if (phy_id == 1 && location < 6 &&
621 er16(MIIData) == 0xffff) {
622 ew32(MIICtrl, read_cmd);
625 return er16(MIIData);
631 static void mdio_write(struct net_device *dev, int phy_id, int loc, int value)
633 struct epic_private *ep = netdev_priv(dev);
634 void __iomem *ioaddr = ep->ioaddr;
637 ew16(MIIData, value);
638 ew32(MIICtrl, (phy_id << 9) | (loc << 4) | MII_WRITEOP);
639 for (i = 10000; i > 0; i--) {
641 if ((er32(MIICtrl) & MII_WRITEOP) == 0)
647 static int epic_open(struct net_device *dev)
649 struct epic_private *ep = netdev_priv(dev);
650 void __iomem *ioaddr = ep->ioaddr;
651 const int irq = ep->pci_dev->irq;
654 /* Soft reset the chip. */
655 ew32(GENCTL, 0x4001);
657 napi_enable(&ep->napi);
658 rc = request_irq(irq, epic_interrupt, IRQF_SHARED, dev->name, dev);
660 napi_disable(&ep->napi);
666 ew32(GENCTL, 0x4000);
667 /* This magic is documented in SMSC app note 7.15 */
668 for (i = 16; i > 0; i--)
671 /* Pull the chip out of low-power mode, enable interrupts, and set for
672 PCI read multiple. The MIIcfg setting and strange write order are
673 required by the details of which bits are reset and the transceiver
674 wiring on the Ositech CardBus card.
677 ew32(MIICfg, dev->if_port == 1 ? 0x13 : 0x12);
679 if (ep->chip_flags & MII_PWRDWN)
680 ew32(NVCTL, (er32(NVCTL) & ~0x003c) | 0x4800);
682 /* Tell the chip to byteswap descriptors on big-endian hosts */
684 ew32(GENCTL, 0x4432 | (RX_FIFO_THRESH << 8));
686 ew32(GENCTL, 0x0432 | (RX_FIFO_THRESH << 8));
688 ew32(GENCTL, 0x4412 | (RX_FIFO_THRESH << 8));
690 ew32(GENCTL, 0x0412 | (RX_FIFO_THRESH << 8));
693 udelay(20); /* Looks like EPII needs that if you want reliable RX init. FIXME: pci posting bug? */
695 for (i = 0; i < 3; i++)
696 ew32(LAN0 + i*4, le16_to_cpu(((__le16*)dev->dev_addr)[i]));
698 ep->tx_threshold = TX_FIFO_THRESH;
699 ew32(TxThresh, ep->tx_threshold);
701 if (media2miictl[dev->if_port & 15]) {
703 mdio_write(dev, ep->phys[0], MII_BMCR, media2miictl[dev->if_port&15]);
704 if (dev->if_port == 1) {
706 printk(KERN_INFO "%s: Using the 10base2 transceiver, MII "
708 dev->name, mdio_read(dev, ep->phys[0], MII_BMSR));
711 int mii_lpa = mdio_read(dev, ep->phys[0], MII_LPA);
712 if (mii_lpa != 0xffff) {
713 if ((mii_lpa & LPA_100FULL) || (mii_lpa & 0x01C0) == LPA_10FULL)
714 ep->mii.full_duplex = 1;
715 else if (! (mii_lpa & LPA_LPACK))
716 mdio_write(dev, ep->phys[0], MII_BMCR, BMCR_ANENABLE|BMCR_ANRESTART);
718 printk(KERN_INFO "%s: Setting %s-duplex based on MII xcvr %d"
719 " register read of %4.4x.\n", dev->name,
720 ep->mii.full_duplex ? "full" : "half",
721 ep->phys[0], mii_lpa);
725 ew32(TxCtrl, ep->mii.full_duplex ? 0x7f : 0x79);
726 ew32(PRxCDAR, ep->rx_ring_dma);
727 ew32(PTxCDAR, ep->tx_ring_dma);
729 /* Start the chip's Rx process. */
731 ew32(COMMAND, StartRx | RxQueued);
733 netif_start_queue(dev);
735 /* Enable interrupts by setting the interrupt mask. */
736 ew32(INTMASK, RxError | RxHeader | EpicNapiEvent | CntFull |
737 ((ep->chip_flags & TYPE2_INTR) ? PCIBusErr175 : PCIBusErr170) |
741 printk(KERN_DEBUG "%s: epic_open() ioaddr %p IRQ %d "
742 "status %4.4x %s-duplex.\n",
743 dev->name, ioaddr, irq, er32(GENCTL),
744 ep->mii.full_duplex ? "full" : "half");
747 /* Set the timer to switch to check for link beat and perhaps switch
748 to an alternate media type. */
749 init_timer(&ep->timer);
750 ep->timer.expires = jiffies + 3*HZ;
751 ep->timer.data = (unsigned long)dev;
752 ep->timer.function = epic_timer; /* timer handler */
753 add_timer(&ep->timer);
758 /* Reset the chip to recover from a PCI transaction error.
759 This may occur at interrupt time. */
760 static void epic_pause(struct net_device *dev)
762 struct net_device_stats *stats = &dev->stats;
763 struct epic_private *ep = netdev_priv(dev);
764 void __iomem *ioaddr = ep->ioaddr;
766 netif_stop_queue (dev);
768 /* Disable interrupts by clearing the interrupt mask. */
769 ew32(INTMASK, 0x00000000);
770 /* Stop the chip's Tx and Rx DMA processes. */
771 ew16(COMMAND, StopRx | StopTxDMA | StopRxDMA);
773 /* Update the error counts. */
774 if (er16(COMMAND) != 0xffff) {
775 stats->rx_missed_errors += er8(MPCNT);
776 stats->rx_frame_errors += er8(ALICNT);
777 stats->rx_crc_errors += er8(CRCCNT);
780 /* Remove the packets on the Rx queue. */
781 epic_rx(dev, RX_RING_SIZE);
784 static void epic_restart(struct net_device *dev)
786 struct epic_private *ep = netdev_priv(dev);
787 void __iomem *ioaddr = ep->ioaddr;
790 /* Soft reset the chip. */
791 ew32(GENCTL, 0x4001);
793 printk(KERN_DEBUG "%s: Restarting the EPIC chip, Rx %d/%d Tx %d/%d.\n",
794 dev->name, ep->cur_rx, ep->dirty_rx, ep->dirty_tx, ep->cur_tx);
797 /* This magic is documented in SMSC app note 7.15 */
798 for (i = 16; i > 0; i--)
802 ew32(GENCTL, 0x0432 | (RX_FIFO_THRESH << 8));
804 ew32(GENCTL, 0x0412 | (RX_FIFO_THRESH << 8));
806 ew32(MIICfg, dev->if_port == 1 ? 0x13 : 0x12);
807 if (ep->chip_flags & MII_PWRDWN)
808 ew32(NVCTL, (er32(NVCTL) & ~0x003c) | 0x4800);
810 for (i = 0; i < 3; i++)
811 ew32(LAN0 + i*4, le16_to_cpu(((__le16*)dev->dev_addr)[i]));
813 ep->tx_threshold = TX_FIFO_THRESH;
814 ew32(TxThresh, ep->tx_threshold);
815 ew32(TxCtrl, ep->mii.full_duplex ? 0x7f : 0x79);
816 ew32(PRxCDAR, ep->rx_ring_dma +
817 (ep->cur_rx % RX_RING_SIZE) * sizeof(struct epic_rx_desc));
818 ew32(PTxCDAR, ep->tx_ring_dma +
819 (ep->dirty_tx % TX_RING_SIZE) * sizeof(struct epic_tx_desc));
821 /* Start the chip's Rx process. */
823 ew32(COMMAND, StartRx | RxQueued);
825 /* Enable interrupts by setting the interrupt mask. */
826 ew32(INTMASK, RxError | RxHeader | EpicNapiEvent | CntFull |
827 ((ep->chip_flags & TYPE2_INTR) ? PCIBusErr175 : PCIBusErr170) |
830 printk(KERN_DEBUG "%s: epic_restart() done, cmd status %4.4x, ctl %4.4x"
831 " interrupt %4.4x.\n",
832 dev->name, er32(COMMAND), er32(GENCTL), er32(INTSTAT));
835 static void check_media(struct net_device *dev)
837 struct epic_private *ep = netdev_priv(dev);
838 void __iomem *ioaddr = ep->ioaddr;
839 int mii_lpa = ep->mii_phy_cnt ? mdio_read(dev, ep->phys[0], MII_LPA) : 0;
840 int negotiated = mii_lpa & ep->mii.advertising;
841 int duplex = (negotiated & 0x0100) || (negotiated & 0x01C0) == 0x0040;
843 if (ep->mii.force_media)
845 if (mii_lpa == 0xffff) /* Bogus read */
847 if (ep->mii.full_duplex != duplex) {
848 ep->mii.full_duplex = duplex;
849 printk(KERN_INFO "%s: Setting %s-duplex based on MII #%d link"
850 " partner capability of %4.4x.\n", dev->name,
851 ep->mii.full_duplex ? "full" : "half", ep->phys[0], mii_lpa);
852 ew32(TxCtrl, ep->mii.full_duplex ? 0x7F : 0x79);
856 static void epic_timer(unsigned long data)
858 struct net_device *dev = (struct net_device *)data;
859 struct epic_private *ep = netdev_priv(dev);
860 void __iomem *ioaddr = ep->ioaddr;
861 int next_tick = 5*HZ;
864 printk(KERN_DEBUG "%s: Media monitor tick, Tx status %8.8x.\n",
865 dev->name, er32(TxSTAT));
866 printk(KERN_DEBUG "%s: Other registers are IntMask %4.4x "
867 "IntStatus %4.4x RxStatus %4.4x.\n", dev->name,
868 er32(INTMASK), er32(INTSTAT), er32(RxSTAT));
873 ep->timer.expires = jiffies + next_tick;
874 add_timer(&ep->timer);
877 static void epic_tx_timeout(struct net_device *dev)
879 struct epic_private *ep = netdev_priv(dev);
880 void __iomem *ioaddr = ep->ioaddr;
883 printk(KERN_WARNING "%s: Transmit timeout using MII device, "
884 "Tx status %4.4x.\n", dev->name, er16(TxSTAT));
886 printk(KERN_DEBUG "%s: Tx indices: dirty_tx %d, cur_tx %d.\n",
887 dev->name, ep->dirty_tx, ep->cur_tx);
890 if (er16(TxSTAT) & 0x10) { /* Tx FIFO underflow. */
891 dev->stats.tx_fifo_errors++;
892 ew32(COMMAND, RestartTx);
895 ew32(COMMAND, TxQueued);
898 dev->trans_start = jiffies; /* prevent tx timeout */
899 dev->stats.tx_errors++;
901 netif_wake_queue(dev);
904 /* Initialize the Rx and Tx rings, along with various 'dev' bits. */
905 static void epic_init_ring(struct net_device *dev)
907 struct epic_private *ep = netdev_priv(dev);
911 ep->dirty_tx = ep->cur_tx = 0;
912 ep->cur_rx = ep->dirty_rx = 0;
913 ep->rx_buf_sz = (dev->mtu <= 1500 ? PKT_BUF_SZ : dev->mtu + 32);
915 /* Initialize all Rx descriptors. */
916 for (i = 0; i < RX_RING_SIZE; i++) {
917 ep->rx_ring[i].rxstatus = 0;
918 ep->rx_ring[i].buflength = ep->rx_buf_sz;
919 ep->rx_ring[i].next = ep->rx_ring_dma +
920 (i+1)*sizeof(struct epic_rx_desc);
921 ep->rx_skbuff[i] = NULL;
923 /* Mark the last entry as wrapping the ring. */
924 ep->rx_ring[i-1].next = ep->rx_ring_dma;
926 /* Fill in the Rx buffers. Handle allocation failure gracefully. */
927 for (i = 0; i < RX_RING_SIZE; i++) {
928 struct sk_buff *skb = netdev_alloc_skb(dev, ep->rx_buf_sz + 2);
929 ep->rx_skbuff[i] = skb;
932 skb_reserve(skb, 2); /* 16 byte align the IP header. */
933 ep->rx_ring[i].bufaddr = pci_map_single(ep->pci_dev,
934 skb->data, ep->rx_buf_sz, PCI_DMA_FROMDEVICE);
935 ep->rx_ring[i].rxstatus = DescOwn;
937 ep->dirty_rx = (unsigned int)(i - RX_RING_SIZE);
939 /* The Tx buffer descriptor is filled in as needed, but we
940 do need to clear the ownership bit. */
941 for (i = 0; i < TX_RING_SIZE; i++) {
942 ep->tx_skbuff[i] = NULL;
943 ep->tx_ring[i].txstatus = 0x0000;
944 ep->tx_ring[i].next = ep->tx_ring_dma +
945 (i+1)*sizeof(struct epic_tx_desc);
947 ep->tx_ring[i-1].next = ep->tx_ring_dma;
950 static netdev_tx_t epic_start_xmit(struct sk_buff *skb, struct net_device *dev)
952 struct epic_private *ep = netdev_priv(dev);
953 void __iomem *ioaddr = ep->ioaddr;
954 int entry, free_count;
958 if (skb_padto(skb, ETH_ZLEN))
961 /* Caution: the write order is important here, set the field with the
962 "ownership" bit last. */
964 /* Calculate the next Tx descriptor entry. */
965 spin_lock_irqsave(&ep->lock, flags);
966 free_count = ep->cur_tx - ep->dirty_tx;
967 entry = ep->cur_tx % TX_RING_SIZE;
969 ep->tx_skbuff[entry] = skb;
970 ep->tx_ring[entry].bufaddr = pci_map_single(ep->pci_dev, skb->data,
971 skb->len, PCI_DMA_TODEVICE);
972 if (free_count < TX_QUEUE_LEN/2) {/* Typical path */
973 ctrl_word = 0x100000; /* No interrupt */
974 } else if (free_count == TX_QUEUE_LEN/2) {
975 ctrl_word = 0x140000; /* Tx-done intr. */
976 } else if (free_count < TX_QUEUE_LEN - 1) {
977 ctrl_word = 0x100000; /* No Tx-done intr. */
979 /* Leave room for an additional entry. */
980 ctrl_word = 0x140000; /* Tx-done intr. */
983 ep->tx_ring[entry].buflength = ctrl_word | skb->len;
984 ep->tx_ring[entry].txstatus =
985 ((skb->len >= ETH_ZLEN ? skb->len : ETH_ZLEN) << 16)
990 netif_stop_queue(dev);
992 spin_unlock_irqrestore(&ep->lock, flags);
993 /* Trigger an immediate transmit demand. */
994 ew32(COMMAND, TxQueued);
997 printk(KERN_DEBUG "%s: Queued Tx packet size %d to slot %d, "
998 "flag %2.2x Tx status %8.8x.\n", dev->name, skb->len,
999 entry, ctrl_word, er32(TxSTAT));
1001 return NETDEV_TX_OK;
1004 static void epic_tx_error(struct net_device *dev, struct epic_private *ep,
1007 struct net_device_stats *stats = &dev->stats;
1009 #ifndef final_version
1010 /* There was an major error, log it. */
1012 printk(KERN_DEBUG "%s: Transmit error, Tx status %8.8x.\n",
1016 if (status & 0x1050)
1017 stats->tx_aborted_errors++;
1018 if (status & 0x0008)
1019 stats->tx_carrier_errors++;
1020 if (status & 0x0040)
1021 stats->tx_window_errors++;
1022 if (status & 0x0010)
1023 stats->tx_fifo_errors++;
1026 static void epic_tx(struct net_device *dev, struct epic_private *ep)
1028 unsigned int dirty_tx, cur_tx;
1031 * Note: if this lock becomes a problem we can narrow the locked
1032 * region at the cost of occasionally grabbing the lock more times.
1034 cur_tx = ep->cur_tx;
1035 for (dirty_tx = ep->dirty_tx; cur_tx - dirty_tx > 0; dirty_tx++) {
1036 struct sk_buff *skb;
1037 int entry = dirty_tx % TX_RING_SIZE;
1038 int txstatus = ep->tx_ring[entry].txstatus;
1040 if (txstatus & DescOwn)
1041 break; /* It still hasn't been Txed */
1043 if (likely(txstatus & 0x0001)) {
1044 dev->stats.collisions += (txstatus >> 8) & 15;
1045 dev->stats.tx_packets++;
1046 dev->stats.tx_bytes += ep->tx_skbuff[entry]->len;
1048 epic_tx_error(dev, ep, txstatus);
1050 /* Free the original skb. */
1051 skb = ep->tx_skbuff[entry];
1052 pci_unmap_single(ep->pci_dev, ep->tx_ring[entry].bufaddr,
1053 skb->len, PCI_DMA_TODEVICE);
1054 dev_kfree_skb_irq(skb);
1055 ep->tx_skbuff[entry] = NULL;
1058 #ifndef final_version
1059 if (cur_tx - dirty_tx > TX_RING_SIZE) {
1061 "%s: Out-of-sync dirty pointer, %d vs. %d, full=%d.\n",
1062 dev->name, dirty_tx, cur_tx, ep->tx_full);
1063 dirty_tx += TX_RING_SIZE;
1066 ep->dirty_tx = dirty_tx;
1067 if (ep->tx_full && cur_tx - dirty_tx < TX_QUEUE_LEN - 4) {
1068 /* The ring is no longer full, allow new TX entries. */
1070 netif_wake_queue(dev);
1074 /* The interrupt handler does all of the Rx thread work and cleans up
1075 after the Tx thread. */
1076 static irqreturn_t epic_interrupt(int irq, void *dev_instance)
1078 struct net_device *dev = dev_instance;
1079 struct epic_private *ep = netdev_priv(dev);
1080 void __iomem *ioaddr = ep->ioaddr;
1081 unsigned int handled = 0;
1084 status = er32(INTSTAT);
1085 /* Acknowledge all of the current interrupt sources ASAP. */
1086 ew32(INTSTAT, status & EpicNormalEvent);
1089 printk(KERN_DEBUG "%s: Interrupt, status=%#8.8x new "
1090 "intstat=%#8.8x.\n", dev->name, status, er32(INTSTAT));
1093 if ((status & IntrSummary) == 0)
1098 if ((status & EpicNapiEvent) && !ep->reschedule_in_poll) {
1099 spin_lock(&ep->napi_lock);
1100 if (napi_schedule_prep(&ep->napi)) {
1101 epic_napi_irq_off(dev, ep);
1102 __napi_schedule(&ep->napi);
1104 ep->reschedule_in_poll++;
1105 spin_unlock(&ep->napi_lock);
1107 status &= ~EpicNapiEvent;
1109 /* Check uncommon events all at once. */
1110 if (status & (CntFull | TxUnderrun | PCIBusErr170 | PCIBusErr175)) {
1111 struct net_device_stats *stats = &dev->stats;
1113 if (status == EpicRemoved)
1116 /* Always update the error counts to avoid overhead later. */
1117 stats->rx_missed_errors += er8(MPCNT);
1118 stats->rx_frame_errors += er8(ALICNT);
1119 stats->rx_crc_errors += er8(CRCCNT);
1121 if (status & TxUnderrun) { /* Tx FIFO underflow. */
1122 stats->tx_fifo_errors++;
1123 ew32(TxThresh, ep->tx_threshold += 128);
1124 /* Restart the transmit process. */
1125 ew32(COMMAND, RestartTx);
1127 if (status & PCIBusErr170) {
1128 printk(KERN_ERR "%s: PCI Bus Error! status %4.4x.\n",
1133 /* Clear all error sources. */
1134 ew32(INTSTAT, status & 0x7f18);
1139 printk(KERN_DEBUG "%s: exit interrupt, intr_status=%#4.4x.\n",
1143 return IRQ_RETVAL(handled);
1146 static int epic_rx(struct net_device *dev, int budget)
1148 struct epic_private *ep = netdev_priv(dev);
1149 int entry = ep->cur_rx % RX_RING_SIZE;
1150 int rx_work_limit = ep->dirty_rx + RX_RING_SIZE - ep->cur_rx;
1154 printk(KERN_DEBUG " In epic_rx(), entry %d %8.8x.\n", entry,
1155 ep->rx_ring[entry].rxstatus);
1157 if (rx_work_limit > budget)
1158 rx_work_limit = budget;
1160 /* If we own the next entry, it's a new packet. Send it up. */
1161 while ((ep->rx_ring[entry].rxstatus & DescOwn) == 0) {
1162 int status = ep->rx_ring[entry].rxstatus;
1165 printk(KERN_DEBUG " epic_rx() status was %8.8x.\n", status);
1166 if (--rx_work_limit < 0)
1168 if (status & 0x2006) {
1170 printk(KERN_DEBUG "%s: epic_rx() error status was %8.8x.\n",
1172 if (status & 0x2000) {
1173 printk(KERN_WARNING "%s: Oversized Ethernet frame spanned "
1174 "multiple buffers, status %4.4x!\n", dev->name, status);
1175 dev->stats.rx_length_errors++;
1176 } else if (status & 0x0006)
1177 /* Rx Frame errors are counted in hardware. */
1178 dev->stats.rx_errors++;
1180 /* Malloc up new buffer, compatible with net-2e. */
1181 /* Omit the four octet CRC from the length. */
1182 short pkt_len = (status >> 16) - 4;
1183 struct sk_buff *skb;
1185 if (pkt_len > PKT_BUF_SZ - 4) {
1186 printk(KERN_ERR "%s: Oversized Ethernet frame, status %x "
1188 dev->name, status, pkt_len);
1191 /* Check if the packet is long enough to accept without copying
1192 to a minimally-sized skbuff. */
1193 if (pkt_len < rx_copybreak &&
1194 (skb = netdev_alloc_skb(dev, pkt_len + 2)) != NULL) {
1195 skb_reserve(skb, 2); /* 16 byte align the IP header */
1196 pci_dma_sync_single_for_cpu(ep->pci_dev,
1197 ep->rx_ring[entry].bufaddr,
1199 PCI_DMA_FROMDEVICE);
1200 skb_copy_to_linear_data(skb, ep->rx_skbuff[entry]->data, pkt_len);
1201 skb_put(skb, pkt_len);
1202 pci_dma_sync_single_for_device(ep->pci_dev,
1203 ep->rx_ring[entry].bufaddr,
1205 PCI_DMA_FROMDEVICE);
1207 pci_unmap_single(ep->pci_dev,
1208 ep->rx_ring[entry].bufaddr,
1209 ep->rx_buf_sz, PCI_DMA_FROMDEVICE);
1210 skb_put(skb = ep->rx_skbuff[entry], pkt_len);
1211 ep->rx_skbuff[entry] = NULL;
1213 skb->protocol = eth_type_trans(skb, dev);
1214 netif_receive_skb(skb);
1215 dev->stats.rx_packets++;
1216 dev->stats.rx_bytes += pkt_len;
1219 entry = (++ep->cur_rx) % RX_RING_SIZE;
1222 /* Refill the Rx ring buffers. */
1223 for (; ep->cur_rx - ep->dirty_rx > 0; ep->dirty_rx++) {
1224 entry = ep->dirty_rx % RX_RING_SIZE;
1225 if (ep->rx_skbuff[entry] == NULL) {
1226 struct sk_buff *skb;
1227 skb = ep->rx_skbuff[entry] = netdev_alloc_skb(dev, ep->rx_buf_sz + 2);
1230 skb_reserve(skb, 2); /* Align IP on 16 byte boundaries */
1231 ep->rx_ring[entry].bufaddr = pci_map_single(ep->pci_dev,
1232 skb->data, ep->rx_buf_sz, PCI_DMA_FROMDEVICE);
1235 /* AV: shouldn't we add a barrier here? */
1236 ep->rx_ring[entry].rxstatus = DescOwn;
1241 static void epic_rx_err(struct net_device *dev, struct epic_private *ep)
1243 void __iomem *ioaddr = ep->ioaddr;
1246 status = er32(INTSTAT);
1248 if (status == EpicRemoved)
1250 if (status & RxOverflow) /* Missed a Rx frame. */
1251 dev->stats.rx_errors++;
1252 if (status & (RxOverflow | RxFull))
1253 ew16(COMMAND, RxQueued);
1256 static int epic_poll(struct napi_struct *napi, int budget)
1258 struct epic_private *ep = container_of(napi, struct epic_private, napi);
1259 struct net_device *dev = ep->mii.dev;
1261 void __iomem *ioaddr = ep->ioaddr;
1267 work_done += epic_rx(dev, budget);
1269 epic_rx_err(dev, ep);
1271 if (work_done < budget) {
1272 unsigned long flags;
1275 /* A bit baroque but it avoids a (space hungry) spin_unlock */
1277 spin_lock_irqsave(&ep->napi_lock, flags);
1279 more = ep->reschedule_in_poll;
1281 __napi_complete(napi);
1282 ew32(INTSTAT, EpicNapiEvent);
1283 epic_napi_irq_on(dev, ep);
1285 ep->reschedule_in_poll--;
1287 spin_unlock_irqrestore(&ep->napi_lock, flags);
1296 static int epic_close(struct net_device *dev)
1298 struct epic_private *ep = netdev_priv(dev);
1299 struct pci_dev *pdev = ep->pci_dev;
1300 void __iomem *ioaddr = ep->ioaddr;
1301 struct sk_buff *skb;
1304 netif_stop_queue(dev);
1305 napi_disable(&ep->napi);
1308 printk(KERN_DEBUG "%s: Shutting down ethercard, status was %2.2x.\n",
1309 dev->name, er32(INTSTAT));
1311 del_timer_sync(&ep->timer);
1313 epic_disable_int(dev, ep);
1315 free_irq(pdev->irq, dev);
1319 /* Free all the skbuffs in the Rx queue. */
1320 for (i = 0; i < RX_RING_SIZE; i++) {
1321 skb = ep->rx_skbuff[i];
1322 ep->rx_skbuff[i] = NULL;
1323 ep->rx_ring[i].rxstatus = 0; /* Not owned by Epic chip. */
1324 ep->rx_ring[i].buflength = 0;
1326 pci_unmap_single(pdev, ep->rx_ring[i].bufaddr,
1327 ep->rx_buf_sz, PCI_DMA_FROMDEVICE);
1330 ep->rx_ring[i].bufaddr = 0xBADF00D0; /* An invalid address. */
1332 for (i = 0; i < TX_RING_SIZE; i++) {
1333 skb = ep->tx_skbuff[i];
1334 ep->tx_skbuff[i] = NULL;
1337 pci_unmap_single(pdev, ep->tx_ring[i].bufaddr, skb->len,
1342 /* Green! Leave the chip in low-power mode. */
1343 ew32(GENCTL, 0x0008);
1348 static struct net_device_stats *epic_get_stats(struct net_device *dev)
1350 struct epic_private *ep = netdev_priv(dev);
1351 void __iomem *ioaddr = ep->ioaddr;
1353 if (netif_running(dev)) {
1354 struct net_device_stats *stats = &dev->stats;
1356 stats->rx_missed_errors += er8(MPCNT);
1357 stats->rx_frame_errors += er8(ALICNT);
1358 stats->rx_crc_errors += er8(CRCCNT);
1364 /* Set or clear the multicast filter for this adaptor.
1365 Note that we only use exclusion around actually queueing the
1366 new frame, not around filling ep->setup_frame. This is non-deterministic
1367 when re-entered but still correct. */
1369 static void set_rx_mode(struct net_device *dev)
1371 struct epic_private *ep = netdev_priv(dev);
1372 void __iomem *ioaddr = ep->ioaddr;
1373 unsigned char mc_filter[8]; /* Multicast hash filter */
1376 if (dev->flags & IFF_PROMISC) { /* Set promiscuous. */
1377 ew32(RxCtrl, 0x002c);
1378 /* Unconditionally log net taps. */
1379 memset(mc_filter, 0xff, sizeof(mc_filter));
1380 } else if ((!netdev_mc_empty(dev)) || (dev->flags & IFF_ALLMULTI)) {
1381 /* There is apparently a chip bug, so the multicast filter
1382 is never enabled. */
1383 /* Too many to filter perfectly -- accept all multicasts. */
1384 memset(mc_filter, 0xff, sizeof(mc_filter));
1385 ew32(RxCtrl, 0x000c);
1386 } else if (netdev_mc_empty(dev)) {
1387 ew32(RxCtrl, 0x0004);
1389 } else { /* Never executed, for now. */
1390 struct netdev_hw_addr *ha;
1392 memset(mc_filter, 0, sizeof(mc_filter));
1393 netdev_for_each_mc_addr(ha, dev) {
1394 unsigned int bit_nr =
1395 ether_crc_le(ETH_ALEN, ha->addr) & 0x3f;
1396 mc_filter[bit_nr >> 3] |= (1 << bit_nr);
1399 /* ToDo: perhaps we need to stop the Tx and Rx process here? */
1400 if (memcmp(mc_filter, ep->mc_filter, sizeof(mc_filter))) {
1401 for (i = 0; i < 4; i++)
1402 ew16(MC0 + i*4, ((u16 *)mc_filter)[i]);
1403 memcpy(ep->mc_filter, mc_filter, sizeof(mc_filter));
1407 static void netdev_get_drvinfo (struct net_device *dev, struct ethtool_drvinfo *info)
1409 struct epic_private *np = netdev_priv(dev);
1411 strlcpy(info->driver, DRV_NAME, sizeof(info->driver));
1412 strlcpy(info->version, DRV_VERSION, sizeof(info->version));
1413 strlcpy(info->bus_info, pci_name(np->pci_dev), sizeof(info->bus_info));
1416 static int netdev_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
1418 struct epic_private *np = netdev_priv(dev);
1421 spin_lock_irq(&np->lock);
1422 rc = mii_ethtool_gset(&np->mii, cmd);
1423 spin_unlock_irq(&np->lock);
1428 static int netdev_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
1430 struct epic_private *np = netdev_priv(dev);
1433 spin_lock_irq(&np->lock);
1434 rc = mii_ethtool_sset(&np->mii, cmd);
1435 spin_unlock_irq(&np->lock);
1440 static int netdev_nway_reset(struct net_device *dev)
1442 struct epic_private *np = netdev_priv(dev);
1443 return mii_nway_restart(&np->mii);
1446 static u32 netdev_get_link(struct net_device *dev)
1448 struct epic_private *np = netdev_priv(dev);
1449 return mii_link_ok(&np->mii);
1452 static u32 netdev_get_msglevel(struct net_device *dev)
1457 static void netdev_set_msglevel(struct net_device *dev, u32 value)
1462 static int ethtool_begin(struct net_device *dev)
1464 struct epic_private *ep = netdev_priv(dev);
1465 void __iomem *ioaddr = ep->ioaddr;
1467 /* power-up, if interface is down */
1468 if (!netif_running(dev)) {
1469 ew32(GENCTL, 0x0200);
1470 ew32(NVCTL, (er32(NVCTL) & ~0x003c) | 0x4800);
1475 static void ethtool_complete(struct net_device *dev)
1477 struct epic_private *ep = netdev_priv(dev);
1478 void __iomem *ioaddr = ep->ioaddr;
1480 /* power-down, if interface is down */
1481 if (!netif_running(dev)) {
1482 ew32(GENCTL, 0x0008);
1483 ew32(NVCTL, (er32(NVCTL) & ~0x483c) | 0x0000);
1487 static const struct ethtool_ops netdev_ethtool_ops = {
1488 .get_drvinfo = netdev_get_drvinfo,
1489 .get_settings = netdev_get_settings,
1490 .set_settings = netdev_set_settings,
1491 .nway_reset = netdev_nway_reset,
1492 .get_link = netdev_get_link,
1493 .get_msglevel = netdev_get_msglevel,
1494 .set_msglevel = netdev_set_msglevel,
1495 .begin = ethtool_begin,
1496 .complete = ethtool_complete
1499 static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
1501 struct epic_private *np = netdev_priv(dev);
1502 void __iomem *ioaddr = np->ioaddr;
1503 struct mii_ioctl_data *data = if_mii(rq);
1506 /* power-up, if interface is down */
1507 if (! netif_running(dev)) {
1508 ew32(GENCTL, 0x0200);
1509 ew32(NVCTL, (er32(NVCTL) & ~0x003c) | 0x4800);
1512 /* all non-ethtool ioctls (the SIOC[GS]MIIxxx ioctls) */
1513 spin_lock_irq(&np->lock);
1514 rc = generic_mii_ioctl(&np->mii, data, cmd, NULL);
1515 spin_unlock_irq(&np->lock);
1517 /* power-down, if interface is down */
1518 if (! netif_running(dev)) {
1519 ew32(GENCTL, 0x0008);
1520 ew32(NVCTL, (er32(NVCTL) & ~0x483c) | 0x0000);
1526 static void epic_remove_one(struct pci_dev *pdev)
1528 struct net_device *dev = pci_get_drvdata(pdev);
1529 struct epic_private *ep = netdev_priv(dev);
1531 pci_free_consistent(pdev, TX_TOTAL_SIZE, ep->tx_ring, ep->tx_ring_dma);
1532 pci_free_consistent(pdev, RX_TOTAL_SIZE, ep->rx_ring, ep->rx_ring_dma);
1533 unregister_netdev(dev);
1534 pci_iounmap(pdev, ep->ioaddr);
1535 pci_release_regions(pdev);
1537 pci_disable_device(pdev);
1538 pci_set_drvdata(pdev, NULL);
1539 /* pci_power_off(pdev, -1); */
1545 static int epic_suspend (struct pci_dev *pdev, pm_message_t state)
1547 struct net_device *dev = pci_get_drvdata(pdev);
1548 struct epic_private *ep = netdev_priv(dev);
1549 void __iomem *ioaddr = ep->ioaddr;
1551 if (!netif_running(dev))
1554 /* Put the chip into low-power mode. */
1555 ew32(GENCTL, 0x0008);
1556 /* pci_power_off(pdev, -1); */
1561 static int epic_resume (struct pci_dev *pdev)
1563 struct net_device *dev = pci_get_drvdata(pdev);
1565 if (!netif_running(dev))
1568 /* pci_power_on(pdev); */
1572 #endif /* CONFIG_PM */
1575 static struct pci_driver epic_driver = {
1577 .id_table = epic_pci_tbl,
1578 .probe = epic_init_one,
1579 .remove = epic_remove_one,
1581 .suspend = epic_suspend,
1582 .resume = epic_resume,
1583 #endif /* CONFIG_PM */
1587 static int __init epic_init (void)
1589 /* when a module, this is printed whether or not devices are found in probe */
1591 printk (KERN_INFO "%s%s",
1595 return pci_register_driver(&epic_driver);
1599 static void __exit epic_cleanup (void)
1601 pci_unregister_driver (&epic_driver);
1605 module_init(epic_init);
1606 module_exit(epic_cleanup);