1 /*********************************************************************
3 * Description: Driver for the SMC Infrared Communications Controller
4 * Author: Daniele Peri (peri@csai.unipa.it)
9 * Copyright (c) 2002 Daniele Peri
10 * All Rights Reserved.
11 * Copyright (c) 2002 Jean Tourrilhes
12 * Copyright (c) 2006 Linus Walleij
15 * Based on smc-ircc.c:
17 * Copyright (c) 2001 Stefani Seibold
18 * Copyright (c) 1999-2001 Dag Brattli
19 * Copyright (c) 1998-1999 Thomas Davis,
23 * Copyright (c) 1997, 1998, 1999-2000 Dag Brattli, All Rights Reserved.
26 * This program is free software; you can redistribute it and/or
27 * modify it under the terms of the GNU General Public License as
28 * published by the Free Software Foundation; either version 2 of
29 * the License, or (at your option) any later version.
31 * This program is distributed in the hope that it will be useful,
32 * but WITHOUT ANY WARRANTY; without even the implied warranty of
33 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
34 * GNU General Public License for more details.
36 * You should have received a copy of the GNU General Public License
37 * along with this program; if not, see <http://www.gnu.org/licenses/>.
39 ********************************************************************/
41 #include <linux/module.h>
42 #include <linux/kernel.h>
43 #include <linux/types.h>
44 #include <linux/skbuff.h>
45 #include <linux/netdevice.h>
46 #include <linux/ioport.h>
47 #include <linux/delay.h>
48 #include <linux/init.h>
49 #include <linux/interrupt.h>
50 #include <linux/rtnetlink.h>
51 #include <linux/serial_reg.h>
52 #include <linux/dma-mapping.h>
53 #include <linux/pnp.h>
54 #include <linux/platform_device.h>
55 #include <linux/gfp.h>
59 #include <asm/byteorder.h>
61 #include <linux/spinlock.h>
64 #include <linux/pci.h>
67 #include <net/irda/wrapper.h>
68 #include <net/irda/irda.h>
69 #include <net/irda/irda_device.h>
71 #include "smsc-ircc2.h"
75 MODULE_AUTHOR("Daniele Peri <peri@csai.unipa.it>");
76 MODULE_DESCRIPTION("SMC IrCC SIR/FIR controller driver");
77 MODULE_LICENSE("GPL");
79 static bool smsc_nopnp = true;
80 module_param_named(nopnp, smsc_nopnp, bool, 0);
81 MODULE_PARM_DESC(nopnp, "Do not use PNP to detect controller settings, defaults to true");
84 static int ircc_dma = DMA_INVAL;
85 module_param(ircc_dma, int, 0);
86 MODULE_PARM_DESC(ircc_dma, "DMA channel");
89 static int ircc_irq = IRQ_INVAL;
90 module_param(ircc_irq, int, 0);
91 MODULE_PARM_DESC(ircc_irq, "IRQ line");
94 module_param(ircc_fir, int, 0);
95 MODULE_PARM_DESC(ircc_fir, "FIR Base Address");
98 module_param(ircc_sir, int, 0);
99 MODULE_PARM_DESC(ircc_sir, "SIR Base Address");
102 module_param(ircc_cfg, int, 0);
103 MODULE_PARM_DESC(ircc_cfg, "Configuration register base address");
105 static int ircc_transceiver;
106 module_param(ircc_transceiver, int, 0);
107 MODULE_PARM_DESC(ircc_transceiver, "Transceiver type");
112 struct smsc_ircc_subsystem_configuration {
113 unsigned short vendor; /* PCI vendor ID */
114 unsigned short device; /* PCI vendor ID */
115 unsigned short subvendor; /* PCI subsystem vendor ID */
116 unsigned short subdevice; /* PCI subsystem device ID */
117 unsigned short sir_io; /* I/O port for SIR */
118 unsigned short fir_io; /* I/O port for FIR */
119 unsigned char fir_irq; /* FIR IRQ */
120 unsigned char fir_dma; /* FIR DMA */
121 unsigned short cfg_base; /* I/O port for chip configuration */
122 int (*preconfigure)(struct pci_dev *dev, struct smsc_ircc_subsystem_configuration *conf); /* Preconfig function */
123 const char *name; /* name shown as info */
127 struct smsc_transceiver {
129 void (*set_for_speed)(int fir_base, u32 speed);
130 int (*probe)(int fir_base);
143 struct smsc_chip_address {
144 unsigned int cfg_base;
148 /* Private data for each instance */
149 struct smsc_ircc_cb {
150 struct net_device *netdev; /* Yes! we are some kind of netdevice */
151 struct irlap_cb *irlap; /* The link layer we are binded to */
153 chipio_t io; /* IrDA controller information */
154 iobuff_t tx_buff; /* Transmit buffer */
155 iobuff_t rx_buff; /* Receive buffer */
156 dma_addr_t tx_buff_dma;
157 dma_addr_t rx_buff_dma;
159 struct qos_info qos; /* QoS capabilities for this device */
161 spinlock_t lock; /* For serializing operations */
164 __u32 flags; /* Interface flags */
166 int tx_buff_offsets[10]; /* Offsets between frames in tx_buff */
167 int tx_len; /* Number of frames in tx_buff */
170 struct platform_device *pldev;
175 #define SMSC_IRCC2_DRIVER_NAME "smsc-ircc2"
177 #define SMSC_IRCC2_C_IRDA_FALLBACK_SPEED 9600
178 #define SMSC_IRCC2_C_DEFAULT_TRANSCEIVER 1
179 #define SMSC_IRCC2_C_NET_TIMEOUT 0
180 #define SMSC_IRCC2_C_SIR_STOP 0
182 static const char *driver_name = SMSC_IRCC2_DRIVER_NAME;
186 static int smsc_ircc_open(unsigned int firbase, unsigned int sirbase, u8 dma, u8 irq);
187 static int smsc_ircc_present(unsigned int fir_base, unsigned int sir_base);
188 static void smsc_ircc_setup_io(struct smsc_ircc_cb *self, unsigned int fir_base, unsigned int sir_base, u8 dma, u8 irq);
189 static void smsc_ircc_setup_qos(struct smsc_ircc_cb *self);
190 static void smsc_ircc_init_chip(struct smsc_ircc_cb *self);
191 static int __exit smsc_ircc_close(struct smsc_ircc_cb *self);
192 static int smsc_ircc_dma_receive(struct smsc_ircc_cb *self);
193 static void smsc_ircc_dma_receive_complete(struct smsc_ircc_cb *self);
194 static void smsc_ircc_sir_receive(struct smsc_ircc_cb *self);
195 static netdev_tx_t smsc_ircc_hard_xmit_sir(struct sk_buff *skb,
196 struct net_device *dev);
197 static netdev_tx_t smsc_ircc_hard_xmit_fir(struct sk_buff *skb,
198 struct net_device *dev);
199 static void smsc_ircc_dma_xmit(struct smsc_ircc_cb *self, int bofs);
200 static void smsc_ircc_dma_xmit_complete(struct smsc_ircc_cb *self);
201 static void smsc_ircc_change_speed(struct smsc_ircc_cb *self, u32 speed);
202 static void smsc_ircc_set_sir_speed(struct smsc_ircc_cb *self, u32 speed);
203 static irqreturn_t smsc_ircc_interrupt(int irq, void *dev_id);
204 static irqreturn_t smsc_ircc_interrupt_sir(struct net_device *dev);
205 static void smsc_ircc_sir_start(struct smsc_ircc_cb *self);
206 #if SMSC_IRCC2_C_SIR_STOP
207 static void smsc_ircc_sir_stop(struct smsc_ircc_cb *self);
209 static void smsc_ircc_sir_write_wakeup(struct smsc_ircc_cb *self);
210 static int smsc_ircc_sir_write(int iobase, int fifo_size, __u8 *buf, int len);
211 static int smsc_ircc_net_open(struct net_device *dev);
212 static int smsc_ircc_net_close(struct net_device *dev);
213 static int smsc_ircc_net_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
214 #if SMSC_IRCC2_C_NET_TIMEOUT
215 static void smsc_ircc_timeout(struct net_device *dev);
217 static int smsc_ircc_is_receiving(struct smsc_ircc_cb *self);
218 static void smsc_ircc_probe_transceiver(struct smsc_ircc_cb *self);
219 static void smsc_ircc_set_transceiver_for_speed(struct smsc_ircc_cb *self, u32 speed);
220 static void smsc_ircc_sir_wait_hw_transmitter_finish(struct smsc_ircc_cb *self);
223 static int __init smsc_ircc_look_for_chips(void);
224 static const struct smsc_chip * __init smsc_ircc_probe(unsigned short cfg_base, u8 reg, const struct smsc_chip *chip, char *type);
225 static int __init smsc_superio_flat(const struct smsc_chip *chips, unsigned short cfg_base, char *type);
226 static int __init smsc_superio_paged(const struct smsc_chip *chips, unsigned short cfg_base, char *type);
227 static int __init smsc_superio_fdc(unsigned short cfg_base);
228 static int __init smsc_superio_lpc(unsigned short cfg_base);
230 static int __init preconfigure_smsc_chip(struct smsc_ircc_subsystem_configuration *conf);
231 static int __init preconfigure_through_82801(struct pci_dev *dev, struct smsc_ircc_subsystem_configuration *conf);
232 static void __init preconfigure_ali_port(struct pci_dev *dev,
233 unsigned short port);
234 static int __init preconfigure_through_ali(struct pci_dev *dev, struct smsc_ircc_subsystem_configuration *conf);
235 static int __init smsc_ircc_preconfigure_subsystems(unsigned short ircc_cfg,
236 unsigned short ircc_fir,
237 unsigned short ircc_sir,
238 unsigned char ircc_dma,
239 unsigned char ircc_irq);
242 /* Transceivers specific functions */
244 static void smsc_ircc_set_transceiver_toshiba_sat1800(int fir_base, u32 speed);
245 static int smsc_ircc_probe_transceiver_toshiba_sat1800(int fir_base);
246 static void smsc_ircc_set_transceiver_smsc_ircc_fast_pin_select(int fir_base, u32 speed);
247 static int smsc_ircc_probe_transceiver_smsc_ircc_fast_pin_select(int fir_base);
248 static void smsc_ircc_set_transceiver_smsc_ircc_atc(int fir_base, u32 speed);
249 static int smsc_ircc_probe_transceiver_smsc_ircc_atc(int fir_base);
251 /* Power Management */
253 static int smsc_ircc_suspend(struct platform_device *dev, pm_message_t state);
254 static int smsc_ircc_resume(struct platform_device *dev);
256 static struct platform_driver smsc_ircc_driver = {
257 .suspend = smsc_ircc_suspend,
258 .resume = smsc_ircc_resume,
260 .name = SMSC_IRCC2_DRIVER_NAME,
264 /* Transceivers for SMSC-ircc */
266 static struct smsc_transceiver smsc_transceivers[] =
268 { "Toshiba Satellite 1800 (GP data pin select)", smsc_ircc_set_transceiver_toshiba_sat1800, smsc_ircc_probe_transceiver_toshiba_sat1800 },
269 { "Fast pin select", smsc_ircc_set_transceiver_smsc_ircc_fast_pin_select, smsc_ircc_probe_transceiver_smsc_ircc_fast_pin_select },
270 { "ATC IRMode", smsc_ircc_set_transceiver_smsc_ircc_atc, smsc_ircc_probe_transceiver_smsc_ircc_atc },
273 #define SMSC_IRCC2_C_NUMBER_OF_TRANSCEIVERS (ARRAY_SIZE(smsc_transceivers) - 1)
275 /* SMC SuperIO chipsets definitions */
277 #define KEY55_1 0 /* SuperIO Configuration mode with Key <0x55> */
278 #define KEY55_2 1 /* SuperIO Configuration mode with Key <0x55,0x55> */
279 #define NoIRDA 2 /* SuperIO Chip has no IRDA Port */
280 #define SIR 0 /* SuperIO Chip has only slow IRDA */
281 #define FIR 4 /* SuperIO Chip has fast IRDA */
282 #define SERx4 8 /* SuperIO Chip supports 115,2 KBaud * 4=460,8 KBaud */
284 static struct smsc_chip __initdata fdc_chips_flat[] =
286 /* Base address 0x3f0 or 0x370 */
287 { "37C44", KEY55_1|NoIRDA, 0x00, 0x00 }, /* This chip cannot be detected */
288 { "37C665GT", KEY55_2|NoIRDA, 0x65, 0x01 },
289 { "37C665GT", KEY55_2|NoIRDA, 0x66, 0x01 },
290 { "37C669", KEY55_2|SIR|SERx4, 0x03, 0x02 },
291 { "37C669", KEY55_2|SIR|SERx4, 0x04, 0x02 }, /* ID? */
292 { "37C78", KEY55_2|NoIRDA, 0x78, 0x00 },
293 { "37N769", KEY55_1|FIR|SERx4, 0x28, 0x00 },
294 { "37N869", KEY55_1|FIR|SERx4, 0x29, 0x00 },
298 static struct smsc_chip __initdata fdc_chips_paged[] =
300 /* Base address 0x3f0 or 0x370 */
301 { "37B72X", KEY55_1|SIR|SERx4, 0x4c, 0x00 },
302 { "37B77X", KEY55_1|SIR|SERx4, 0x43, 0x00 },
303 { "37B78X", KEY55_1|SIR|SERx4, 0x44, 0x00 },
304 { "37B80X", KEY55_1|SIR|SERx4, 0x42, 0x00 },
305 { "37C67X", KEY55_1|FIR|SERx4, 0x40, 0x00 },
306 { "37C93X", KEY55_2|SIR|SERx4, 0x02, 0x01 },
307 { "37C93XAPM", KEY55_1|SIR|SERx4, 0x30, 0x01 },
308 { "37C93XFR", KEY55_2|FIR|SERx4, 0x03, 0x01 },
309 { "37M707", KEY55_1|SIR|SERx4, 0x42, 0x00 },
310 { "37M81X", KEY55_1|SIR|SERx4, 0x4d, 0x00 },
311 { "37N958FR", KEY55_1|FIR|SERx4, 0x09, 0x04 },
312 { "37N971", KEY55_1|FIR|SERx4, 0x0a, 0x00 },
313 { "37N972", KEY55_1|FIR|SERx4, 0x0b, 0x00 },
317 static struct smsc_chip __initdata lpc_chips_flat[] =
319 /* Base address 0x2E or 0x4E */
320 { "47N227", KEY55_1|FIR|SERx4, 0x5a, 0x00 },
321 { "47N227", KEY55_1|FIR|SERx4, 0x7a, 0x00 },
322 { "47N267", KEY55_1|FIR|SERx4, 0x5e, 0x00 },
326 static struct smsc_chip __initdata lpc_chips_paged[] =
328 /* Base address 0x2E or 0x4E */
329 { "47B27X", KEY55_1|SIR|SERx4, 0x51, 0x00 },
330 { "47B37X", KEY55_1|SIR|SERx4, 0x52, 0x00 },
331 { "47M10X", KEY55_1|SIR|SERx4, 0x59, 0x00 },
332 { "47M120", KEY55_1|NoIRDA|SERx4, 0x5c, 0x00 },
333 { "47M13X", KEY55_1|SIR|SERx4, 0x59, 0x00 },
334 { "47M14X", KEY55_1|SIR|SERx4, 0x5f, 0x00 },
335 { "47N252", KEY55_1|FIR|SERx4, 0x0e, 0x00 },
336 { "47S42X", KEY55_1|SIR|SERx4, 0x57, 0x00 },
340 #define SMSCSIO_TYPE_FDC 1
341 #define SMSCSIO_TYPE_LPC 2
342 #define SMSCSIO_TYPE_FLAT 4
343 #define SMSCSIO_TYPE_PAGED 8
345 static struct smsc_chip_address __initdata possible_addresses[] =
347 { 0x3f0, SMSCSIO_TYPE_FDC|SMSCSIO_TYPE_FLAT|SMSCSIO_TYPE_PAGED },
348 { 0x370, SMSCSIO_TYPE_FDC|SMSCSIO_TYPE_FLAT|SMSCSIO_TYPE_PAGED },
349 { 0xe0, SMSCSIO_TYPE_FDC|SMSCSIO_TYPE_FLAT|SMSCSIO_TYPE_PAGED },
350 { 0x2e, SMSCSIO_TYPE_LPC|SMSCSIO_TYPE_FLAT|SMSCSIO_TYPE_PAGED },
351 { 0x4e, SMSCSIO_TYPE_LPC|SMSCSIO_TYPE_FLAT|SMSCSIO_TYPE_PAGED },
357 static struct smsc_ircc_cb *dev_self[] = { NULL, NULL };
358 static unsigned short dev_count;
360 static inline void register_bank(int iobase, int bank)
362 outb(((inb(iobase + IRCC_MASTER) & 0xf0) | (bank & 0x07)),
363 iobase + IRCC_MASTER);
366 /* PNP hotplug support */
367 static const struct pnp_device_id smsc_ircc_pnp_table[] = {
368 { .id = "SMCf010", .driver_data = 0 },
369 /* and presumably others */
372 MODULE_DEVICE_TABLE(pnp, smsc_ircc_pnp_table);
374 static int pnp_driver_registered;
377 static int smsc_ircc_pnp_probe(struct pnp_dev *dev,
378 const struct pnp_device_id *dev_id)
380 unsigned int firbase, sirbase;
383 if (!(pnp_port_valid(dev, 0) && pnp_port_valid(dev, 1) &&
384 pnp_dma_valid(dev, 0) && pnp_irq_valid(dev, 0)))
387 sirbase = pnp_port_start(dev, 0);
388 firbase = pnp_port_start(dev, 1);
389 dma = pnp_dma(dev, 0);
390 irq = pnp_irq(dev, 0);
392 if (smsc_ircc_open(firbase, sirbase, dma, irq))
398 static struct pnp_driver smsc_ircc_pnp_driver = {
399 .name = "smsc-ircc2",
400 .id_table = smsc_ircc_pnp_table,
401 .probe = smsc_ircc_pnp_probe,
403 #else /* CONFIG_PNP */
404 static struct pnp_driver smsc_ircc_pnp_driver;
407 /*******************************************************************************
413 *******************************************************************************/
415 static int __init smsc_ircc_legacy_probe(void)
420 if (smsc_ircc_preconfigure_subsystems(ircc_cfg, ircc_fir, ircc_sir, ircc_dma, ircc_irq) < 0) {
421 /* Ignore errors from preconfiguration */
422 net_err_ratelimited("%s, Preconfiguration failed !\n",
427 if (ircc_fir > 0 && ircc_sir > 0) {
428 net_info_ratelimited(" Overriding FIR address 0x%04x\n",
430 net_info_ratelimited(" Overriding SIR address 0x%04x\n",
433 if (smsc_ircc_open(ircc_fir, ircc_sir, ircc_dma, ircc_irq))
438 /* try user provided configuration register base address */
440 net_info_ratelimited(" Overriding configuration address 0x%04x\n",
442 if (!smsc_superio_fdc(ircc_cfg))
444 if (!smsc_superio_lpc(ircc_cfg))
448 if (smsc_ircc_look_for_chips() > 0)
455 * Function smsc_ircc_init ()
457 * Initialize chip. Just try to find out how many chips we are dealing with
460 static int __init smsc_ircc_init(void)
464 pr_debug("%s\n", __func__);
466 ret = platform_driver_register(&smsc_ircc_driver);
468 net_err_ratelimited("%s, Can't register driver!\n",
475 if (smsc_nopnp || !pnp_platform_devices ||
476 ircc_cfg || ircc_fir || ircc_sir ||
477 ircc_dma != DMA_INVAL || ircc_irq != IRQ_INVAL) {
478 ret = smsc_ircc_legacy_probe();
480 if (pnp_register_driver(&smsc_ircc_pnp_driver) == 0)
481 pnp_driver_registered = 1;
485 if (pnp_driver_registered)
486 pnp_unregister_driver(&smsc_ircc_pnp_driver);
487 platform_driver_unregister(&smsc_ircc_driver);
493 static netdev_tx_t smsc_ircc_net_xmit(struct sk_buff *skb,
494 struct net_device *dev)
496 struct smsc_ircc_cb *self = netdev_priv(dev);
498 if (self->io.speed > 115200)
499 return smsc_ircc_hard_xmit_fir(skb, dev);
501 return smsc_ircc_hard_xmit_sir(skb, dev);
504 static const struct net_device_ops smsc_ircc_netdev_ops = {
505 .ndo_open = smsc_ircc_net_open,
506 .ndo_stop = smsc_ircc_net_close,
507 .ndo_do_ioctl = smsc_ircc_net_ioctl,
508 .ndo_start_xmit = smsc_ircc_net_xmit,
509 #if SMSC_IRCC2_C_NET_TIMEOUT
510 .ndo_tx_timeout = smsc_ircc_timeout,
515 * Function smsc_ircc_open (firbase, sirbase, dma, irq)
517 * Try to open driver instance
520 static int smsc_ircc_open(unsigned int fir_base, unsigned int sir_base, u8 dma, u8 irq)
522 struct smsc_ircc_cb *self;
523 struct net_device *dev;
526 pr_debug("%s\n", __func__);
528 err = smsc_ircc_present(fir_base, sir_base);
533 if (dev_count >= ARRAY_SIZE(dev_self)) {
534 net_warn_ratelimited("%s(), too many devices!\n", __func__);
539 * Allocate new instance of the driver
541 dev = alloc_irdadev(sizeof(struct smsc_ircc_cb));
543 net_warn_ratelimited("%s() can't allocate net device\n",
548 #if SMSC_IRCC2_C_NET_TIMEOUT
549 dev->watchdog_timeo = HZ * 2; /* Allow enough time for speed change */
551 dev->netdev_ops = &smsc_ircc_netdev_ops;
553 self = netdev_priv(dev);
556 /* Make ifconfig display some details */
557 dev->base_addr = self->io.fir_base = fir_base;
558 dev->irq = self->io.irq = irq;
560 /* Need to store self somewhere */
561 dev_self[dev_count] = self;
562 spin_lock_init(&self->lock);
564 self->rx_buff.truesize = SMSC_IRCC2_RX_BUFF_TRUESIZE;
565 self->tx_buff.truesize = SMSC_IRCC2_TX_BUFF_TRUESIZE;
568 dma_zalloc_coherent(NULL, self->rx_buff.truesize,
569 &self->rx_buff_dma, GFP_KERNEL);
570 if (self->rx_buff.head == NULL)
574 dma_zalloc_coherent(NULL, self->tx_buff.truesize,
575 &self->tx_buff_dma, GFP_KERNEL);
576 if (self->tx_buff.head == NULL)
579 self->rx_buff.in_frame = FALSE;
580 self->rx_buff.state = OUTSIDE_FRAME;
581 self->tx_buff.data = self->tx_buff.head;
582 self->rx_buff.data = self->rx_buff.head;
584 smsc_ircc_setup_io(self, fir_base, sir_base, dma, irq);
585 smsc_ircc_setup_qos(self);
586 smsc_ircc_init_chip(self);
588 if (ircc_transceiver > 0 &&
589 ircc_transceiver < SMSC_IRCC2_C_NUMBER_OF_TRANSCEIVERS)
590 self->transceiver = ircc_transceiver;
592 smsc_ircc_probe_transceiver(self);
594 err = register_netdev(self->netdev);
596 net_err_ratelimited("%s, Network device registration failed!\n",
601 self->pldev = platform_device_register_simple(SMSC_IRCC2_DRIVER_NAME,
603 if (IS_ERR(self->pldev)) {
604 err = PTR_ERR(self->pldev);
607 platform_set_drvdata(self->pldev, self);
609 net_info_ratelimited("IrDA: Registered device %s\n", dev->name);
615 unregister_netdev(self->netdev);
618 dma_free_coherent(NULL, self->tx_buff.truesize,
619 self->tx_buff.head, self->tx_buff_dma);
621 dma_free_coherent(NULL, self->rx_buff.truesize,
622 self->rx_buff.head, self->rx_buff_dma);
624 free_netdev(self->netdev);
625 dev_self[dev_count] = NULL;
627 release_region(fir_base, SMSC_IRCC2_FIR_CHIP_IO_EXTENT);
628 release_region(sir_base, SMSC_IRCC2_SIR_CHIP_IO_EXTENT);
634 * Function smsc_ircc_present(fir_base, sir_base)
636 * Check the smsc-ircc chip presence
639 static int smsc_ircc_present(unsigned int fir_base, unsigned int sir_base)
641 unsigned char low, high, chip, config, dma, irq, version;
643 if (!request_region(fir_base, SMSC_IRCC2_FIR_CHIP_IO_EXTENT,
645 net_warn_ratelimited("%s: can't get fir_base of 0x%03x\n",
650 if (!request_region(sir_base, SMSC_IRCC2_SIR_CHIP_IO_EXTENT,
652 net_warn_ratelimited("%s: can't get sir_base of 0x%03x\n",
657 register_bank(fir_base, 3);
659 high = inb(fir_base + IRCC_ID_HIGH);
660 low = inb(fir_base + IRCC_ID_LOW);
661 chip = inb(fir_base + IRCC_CHIP_ID);
662 version = inb(fir_base + IRCC_VERSION);
663 config = inb(fir_base + IRCC_INTERFACE);
664 dma = config & IRCC_INTERFACE_DMA_MASK;
665 irq = (config & IRCC_INTERFACE_IRQ_MASK) >> 4;
667 if (high != 0x10 || low != 0xb8 || (chip != 0xf1 && chip != 0xf2)) {
668 net_warn_ratelimited("%s(), addr 0x%04x - no device found!\n",
672 net_info_ratelimited("SMsC IrDA Controller found\n IrCC version %d.%d, firport 0x%03x, sirport 0x%03x dma=%d, irq=%d\n",
673 chip & 0x0f, version,
674 fir_base, sir_base, dma, irq);
679 release_region(sir_base, SMSC_IRCC2_SIR_CHIP_IO_EXTENT);
681 release_region(fir_base, SMSC_IRCC2_FIR_CHIP_IO_EXTENT);
687 * Function smsc_ircc_setup_io(self, fir_base, sir_base, dma, irq)
692 static void smsc_ircc_setup_io(struct smsc_ircc_cb *self,
693 unsigned int fir_base, unsigned int sir_base,
696 unsigned char config, chip_dma, chip_irq;
698 register_bank(fir_base, 3);
699 config = inb(fir_base + IRCC_INTERFACE);
700 chip_dma = config & IRCC_INTERFACE_DMA_MASK;
701 chip_irq = (config & IRCC_INTERFACE_IRQ_MASK) >> 4;
703 self->io.fir_base = fir_base;
704 self->io.sir_base = sir_base;
705 self->io.fir_ext = SMSC_IRCC2_FIR_CHIP_IO_EXTENT;
706 self->io.sir_ext = SMSC_IRCC2_SIR_CHIP_IO_EXTENT;
707 self->io.fifo_size = SMSC_IRCC2_FIFO_SIZE;
708 self->io.speed = SMSC_IRCC2_C_IRDA_FALLBACK_SPEED;
710 if (irq != IRQ_INVAL) {
712 net_info_ratelimited("%s, Overriding IRQ - chip says %d, using %d\n",
713 driver_name, chip_irq, irq);
716 self->io.irq = chip_irq;
718 if (dma != DMA_INVAL) {
720 net_info_ratelimited("%s, Overriding DMA - chip says %d, using %d\n",
721 driver_name, chip_dma, dma);
724 self->io.dma = chip_dma;
729 * Function smsc_ircc_setup_qos(self)
734 static void smsc_ircc_setup_qos(struct smsc_ircc_cb *self)
736 /* Initialize QoS for this device */
737 irda_init_max_qos_capabilies(&self->qos);
739 self->qos.baud_rate.bits = IR_9600|IR_19200|IR_38400|IR_57600|
740 IR_115200|IR_576000|IR_1152000|(IR_4000000 << 8);
742 self->qos.min_turn_time.bits = SMSC_IRCC2_MIN_TURN_TIME;
743 self->qos.window_size.bits = SMSC_IRCC2_WINDOW_SIZE;
744 irda_qos_bits_to_value(&self->qos);
748 * Function smsc_ircc_init_chip(self)
753 static void smsc_ircc_init_chip(struct smsc_ircc_cb *self)
755 int iobase = self->io.fir_base;
757 register_bank(iobase, 0);
758 outb(IRCC_MASTER_RESET, iobase + IRCC_MASTER);
759 outb(0x00, iobase + IRCC_MASTER);
761 register_bank(iobase, 1);
762 outb(((inb(iobase + IRCC_SCE_CFGA) & 0x87) | IRCC_CFGA_IRDA_SIR_A),
763 iobase + IRCC_SCE_CFGA);
765 #ifdef smsc_669 /* Uses pin 88/89 for Rx/Tx */
766 outb(((inb(iobase + IRCC_SCE_CFGB) & 0x3f) | IRCC_CFGB_MUX_COM),
767 iobase + IRCC_SCE_CFGB);
769 outb(((inb(iobase + IRCC_SCE_CFGB) & 0x3f) | IRCC_CFGB_MUX_IR),
770 iobase + IRCC_SCE_CFGB);
772 (void) inb(iobase + IRCC_FIFO_THRESHOLD);
773 outb(SMSC_IRCC2_FIFO_THRESHOLD, iobase + IRCC_FIFO_THRESHOLD);
775 register_bank(iobase, 4);
776 outb((inb(iobase + IRCC_CONTROL) & 0x30), iobase + IRCC_CONTROL);
778 register_bank(iobase, 0);
779 outb(0, iobase + IRCC_LCR_A);
781 smsc_ircc_set_sir_speed(self, SMSC_IRCC2_C_IRDA_FALLBACK_SPEED);
783 /* Power on device */
784 outb(0x00, iobase + IRCC_MASTER);
788 * Function smsc_ircc_net_ioctl (dev, rq, cmd)
790 * Process IOCTL commands for this device
793 static int smsc_ircc_net_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
795 struct if_irda_req *irq = (struct if_irda_req *) rq;
796 struct smsc_ircc_cb *self;
800 IRDA_ASSERT(dev != NULL, return -1;);
802 self = netdev_priv(dev);
804 IRDA_ASSERT(self != NULL, return -1;);
806 pr_debug("%s(), %s, (cmd=0x%X)\n", __func__, dev->name, cmd);
809 case SIOCSBANDWIDTH: /* Set bandwidth */
810 if (!capable(CAP_NET_ADMIN))
813 /* Make sure we are the only one touching
814 * self->io.speed and the hardware - Jean II */
815 spin_lock_irqsave(&self->lock, flags);
816 smsc_ircc_change_speed(self, irq->ifr_baudrate);
817 spin_unlock_irqrestore(&self->lock, flags);
820 case SIOCSMEDIABUSY: /* Set media busy */
821 if (!capable(CAP_NET_ADMIN)) {
826 irda_device_set_media_busy(self->netdev, TRUE);
828 case SIOCGRECEIVING: /* Check if we are receiving right now */
829 irq->ifr_receiving = smsc_ircc_is_receiving(self);
833 if (!capable(CAP_NET_ADMIN)) {
837 smsc_ircc_sir_set_dtr_rts(dev, irq->ifr_dtr, irq->ifr_rts);
847 #if SMSC_IRCC2_C_NET_TIMEOUT
849 * Function smsc_ircc_timeout (struct net_device *dev)
851 * The networking timeout management.
855 static void smsc_ircc_timeout(struct net_device *dev)
857 struct smsc_ircc_cb *self = netdev_priv(dev);
860 net_warn_ratelimited("%s: transmit timed out, changing speed to: %d\n",
861 dev->name, self->io.speed);
862 spin_lock_irqsave(&self->lock, flags);
863 smsc_ircc_sir_start(self);
864 smsc_ircc_change_speed(self, self->io.speed);
865 dev->trans_start = jiffies; /* prevent tx timeout */
866 netif_wake_queue(dev);
867 spin_unlock_irqrestore(&self->lock, flags);
872 * Function smsc_ircc_hard_xmit_sir (struct sk_buff *skb, struct net_device *dev)
874 * Transmits the current frame until FIFO is full, then
875 * waits until the next transmit interrupt, and continues until the
876 * frame is transmitted.
878 static netdev_tx_t smsc_ircc_hard_xmit_sir(struct sk_buff *skb,
879 struct net_device *dev)
881 struct smsc_ircc_cb *self;
885 pr_debug("%s\n", __func__);
887 IRDA_ASSERT(dev != NULL, return NETDEV_TX_OK;);
889 self = netdev_priv(dev);
890 IRDA_ASSERT(self != NULL, return NETDEV_TX_OK;);
892 netif_stop_queue(dev);
894 /* Make sure test of self->io.speed & speed change are atomic */
895 spin_lock_irqsave(&self->lock, flags);
897 /* Check if we need to change the speed */
898 speed = irda_get_next_speed(skb);
899 if (speed != self->io.speed && speed != -1) {
900 /* Check for empty frame */
903 * We send frames one by one in SIR mode (no
904 * pipelining), so at this point, if we were sending
905 * a previous frame, we just received the interrupt
906 * telling us it is finished (UART_IIR_THRI).
907 * Therefore, waiting for the transmitter to really
908 * finish draining the fifo won't take too long.
909 * And the interrupt handler is not expected to run.
911 smsc_ircc_sir_wait_hw_transmitter_finish(self);
912 smsc_ircc_change_speed(self, speed);
913 spin_unlock_irqrestore(&self->lock, flags);
917 self->new_speed = speed;
921 self->tx_buff.data = self->tx_buff.head;
923 /* Copy skb to tx_buff while wrapping, stuffing and making CRC */
924 self->tx_buff.len = async_wrap_skb(skb, self->tx_buff.data,
925 self->tx_buff.truesize);
927 dev->stats.tx_bytes += self->tx_buff.len;
929 /* Turn on transmit finished interrupt. Will fire immediately! */
930 outb(UART_IER_THRI, self->io.sir_base + UART_IER);
932 spin_unlock_irqrestore(&self->lock, flags);
940 * Function smsc_ircc_set_fir_speed (self, baud)
942 * Change the speed of the device
945 static void smsc_ircc_set_fir_speed(struct smsc_ircc_cb *self, u32 speed)
947 int fir_base, ir_mode, ctrl, fast;
949 IRDA_ASSERT(self != NULL, return;);
950 fir_base = self->io.fir_base;
952 self->io.speed = speed;
957 ir_mode = IRCC_CFGA_IRDA_HDLC;
960 pr_debug("%s(), handling baud of 576000\n", __func__);
963 ir_mode = IRCC_CFGA_IRDA_HDLC;
964 ctrl = IRCC_1152 | IRCC_CRC;
965 fast = IRCC_LCR_A_FAST | IRCC_LCR_A_GP_DATA;
966 pr_debug("%s(), handling baud of 1152000\n",
970 ir_mode = IRCC_CFGA_IRDA_4PPM;
972 fast = IRCC_LCR_A_FAST;
973 pr_debug("%s(), handling baud of 4000000\n",
979 /* This causes an interrupt */
980 register_bank(fir_base, 0);
981 outb((inb(fir_base + IRCC_LCR_A) & 0xbf) | fast, fir_base + IRCC_LCR_A);
984 register_bank(fir_base, 1);
985 outb(((inb(fir_base + IRCC_SCE_CFGA) & IRCC_SCE_CFGA_BLOCK_CTRL_BITS_MASK) | ir_mode), fir_base + IRCC_SCE_CFGA);
987 register_bank(fir_base, 4);
988 outb((inb(fir_base + IRCC_CONTROL) & 0x30) | ctrl, fir_base + IRCC_CONTROL);
992 * Function smsc_ircc_fir_start(self)
994 * Change the speed of the device
997 static void smsc_ircc_fir_start(struct smsc_ircc_cb *self)
999 struct net_device *dev;
1002 pr_debug("%s\n", __func__);
1004 IRDA_ASSERT(self != NULL, return;);
1006 IRDA_ASSERT(dev != NULL, return;);
1008 fir_base = self->io.fir_base;
1010 /* Reset everything */
1013 outb(inb(fir_base + IRCC_LCR_A) | IRCC_LCR_A_FIFO_RESET, fir_base + IRCC_LCR_A);
1015 /* Enable interrupt */
1016 /*outb(IRCC_IER_ACTIVE_FRAME|IRCC_IER_EOM, fir_base + IRCC_IER);*/
1018 register_bank(fir_base, 1);
1020 /* Select the TX/RX interface */
1021 #ifdef SMSC_669 /* Uses pin 88/89 for Rx/Tx */
1022 outb(((inb(fir_base + IRCC_SCE_CFGB) & 0x3f) | IRCC_CFGB_MUX_COM),
1023 fir_base + IRCC_SCE_CFGB);
1025 outb(((inb(fir_base + IRCC_SCE_CFGB) & 0x3f) | IRCC_CFGB_MUX_IR),
1026 fir_base + IRCC_SCE_CFGB);
1028 (void) inb(fir_base + IRCC_FIFO_THRESHOLD);
1030 /* Enable SCE interrupts */
1031 outb(0, fir_base + IRCC_MASTER);
1032 register_bank(fir_base, 0);
1033 outb(IRCC_IER_ACTIVE_FRAME | IRCC_IER_EOM, fir_base + IRCC_IER);
1034 outb(IRCC_MASTER_INT_EN, fir_base + IRCC_MASTER);
1038 * Function smsc_ircc_fir_stop(self, baud)
1040 * Change the speed of the device
1043 static void smsc_ircc_fir_stop(struct smsc_ircc_cb *self)
1047 pr_debug("%s\n", __func__);
1049 IRDA_ASSERT(self != NULL, return;);
1051 fir_base = self->io.fir_base;
1052 register_bank(fir_base, 0);
1053 /*outb(IRCC_MASTER_RESET, fir_base + IRCC_MASTER);*/
1054 outb(inb(fir_base + IRCC_LCR_B) & IRCC_LCR_B_SIP_ENABLE, fir_base + IRCC_LCR_B);
1059 * Function smsc_ircc_change_speed(self, baud)
1061 * Change the speed of the device
1063 * This function *must* be called with spinlock held, because it may
1064 * be called from the irq handler. - Jean II
1066 static void smsc_ircc_change_speed(struct smsc_ircc_cb *self, u32 speed)
1068 struct net_device *dev;
1069 int last_speed_was_sir;
1071 pr_debug("%s() changing speed to: %d\n", __func__, speed);
1073 IRDA_ASSERT(self != NULL, return;);
1076 last_speed_was_sir = self->io.speed <= SMSC_IRCC2_MAX_SIR_SPEED;
1081 self->io.speed = speed;
1082 last_speed_was_sir = 0;
1083 smsc_ircc_fir_start(self);
1086 if (self->io.speed == 0)
1087 smsc_ircc_sir_start(self);
1090 if (!last_speed_was_sir) speed = self->io.speed;
1093 if (self->io.speed != speed)
1094 smsc_ircc_set_transceiver_for_speed(self, speed);
1096 self->io.speed = speed;
1098 if (speed <= SMSC_IRCC2_MAX_SIR_SPEED) {
1099 if (!last_speed_was_sir) {
1100 smsc_ircc_fir_stop(self);
1101 smsc_ircc_sir_start(self);
1103 smsc_ircc_set_sir_speed(self, speed);
1105 if (last_speed_was_sir) {
1106 #if SMSC_IRCC2_C_SIR_STOP
1107 smsc_ircc_sir_stop(self);
1109 smsc_ircc_fir_start(self);
1111 smsc_ircc_set_fir_speed(self, speed);
1114 self->tx_buff.len = 10;
1115 self->tx_buff.data = self->tx_buff.head;
1117 smsc_ircc_dma_xmit(self, 4000);
1119 /* Be ready for incoming frames */
1120 smsc_ircc_dma_receive(self);
1123 netif_wake_queue(dev);
1127 * Function smsc_ircc_set_sir_speed (self, speed)
1129 * Set speed of IrDA port to specified baudrate
1132 static void smsc_ircc_set_sir_speed(struct smsc_ircc_cb *self, __u32 speed)
1135 int fcr; /* FIFO control reg */
1136 int lcr; /* Line control reg */
1139 pr_debug("%s(), Setting speed to: %d\n", __func__, speed);
1141 IRDA_ASSERT(self != NULL, return;);
1142 iobase = self->io.sir_base;
1144 /* Update accounting for new speed */
1145 self->io.speed = speed;
1147 /* Turn off interrupts */
1148 outb(0, iobase + UART_IER);
1150 divisor = SMSC_IRCC2_MAX_SIR_SPEED / speed;
1152 fcr = UART_FCR_ENABLE_FIFO;
1155 * Use trigger level 1 to avoid 3 ms. timeout delay at 9600 bps, and
1156 * almost 1,7 ms at 19200 bps. At speeds above that we can just forget
1157 * about this timeout since it will always be fast enough.
1159 fcr |= self->io.speed < 38400 ?
1160 UART_FCR_TRIGGER_1 : UART_FCR_TRIGGER_14;
1162 /* IrDA ports use 8N1 */
1163 lcr = UART_LCR_WLEN8;
1165 outb(UART_LCR_DLAB | lcr, iobase + UART_LCR); /* Set DLAB */
1166 outb(divisor & 0xff, iobase + UART_DLL); /* Set speed */
1167 outb(divisor >> 8, iobase + UART_DLM);
1168 outb(lcr, iobase + UART_LCR); /* Set 8N1 */
1169 outb(fcr, iobase + UART_FCR); /* Enable FIFO's */
1171 /* Turn on interrups */
1172 outb(UART_IER_RLSI | UART_IER_RDI | UART_IER_THRI, iobase + UART_IER);
1174 pr_debug("%s() speed changed to: %d\n", __func__, speed);
1179 * Function smsc_ircc_hard_xmit_fir (skb, dev)
1181 * Transmit the frame!
1184 static netdev_tx_t smsc_ircc_hard_xmit_fir(struct sk_buff *skb,
1185 struct net_device *dev)
1187 struct smsc_ircc_cb *self;
1188 unsigned long flags;
1192 IRDA_ASSERT(dev != NULL, return NETDEV_TX_OK;);
1193 self = netdev_priv(dev);
1194 IRDA_ASSERT(self != NULL, return NETDEV_TX_OK;);
1196 netif_stop_queue(dev);
1198 /* Make sure test of self->io.speed & speed change are atomic */
1199 spin_lock_irqsave(&self->lock, flags);
1201 /* Check if we need to change the speed after this frame */
1202 speed = irda_get_next_speed(skb);
1203 if (speed != self->io.speed && speed != -1) {
1204 /* Check for empty frame */
1206 /* Note : you should make sure that speed changes
1207 * are not going to corrupt any outgoing frame.
1208 * Look at nsc-ircc for the gory details - Jean II */
1209 smsc_ircc_change_speed(self, speed);
1210 spin_unlock_irqrestore(&self->lock, flags);
1212 return NETDEV_TX_OK;
1215 self->new_speed = speed;
1218 skb_copy_from_linear_data(skb, self->tx_buff.head, skb->len);
1220 self->tx_buff.len = skb->len;
1221 self->tx_buff.data = self->tx_buff.head;
1223 mtt = irda_get_mtt(skb);
1228 * Compute how many BOFs (STA or PA's) we need to waste the
1229 * min turn time given the speed of the link.
1231 bofs = mtt * (self->io.speed / 1000) / 8000;
1235 smsc_ircc_dma_xmit(self, bofs);
1237 /* Transmit frame */
1238 smsc_ircc_dma_xmit(self, 0);
1241 spin_unlock_irqrestore(&self->lock, flags);
1244 return NETDEV_TX_OK;
1248 * Function smsc_ircc_dma_xmit (self, bofs)
1250 * Transmit data using DMA
1253 static void smsc_ircc_dma_xmit(struct smsc_ircc_cb *self, int bofs)
1255 int iobase = self->io.fir_base;
1258 pr_debug("%s\n", __func__);
1261 register_bank(iobase, 0);
1262 outb(0x00, iobase + IRCC_LCR_B);
1264 register_bank(iobase, 1);
1265 outb(inb(iobase + IRCC_SCE_CFGB) & ~IRCC_CFGB_DMA_ENABLE,
1266 iobase + IRCC_SCE_CFGB);
1268 self->io.direction = IO_XMIT;
1270 /* Set BOF additional count for generating the min turn time */
1271 register_bank(iobase, 4);
1272 outb(bofs & 0xff, iobase + IRCC_BOF_COUNT_LO);
1273 ctrl = inb(iobase + IRCC_CONTROL) & 0xf0;
1274 outb(ctrl | ((bofs >> 8) & 0x0f), iobase + IRCC_BOF_COUNT_HI);
1276 /* Set max Tx frame size */
1277 outb(self->tx_buff.len >> 8, iobase + IRCC_TX_SIZE_HI);
1278 outb(self->tx_buff.len & 0xff, iobase + IRCC_TX_SIZE_LO);
1280 /*outb(UART_MCR_OUT2, self->io.sir_base + UART_MCR);*/
1282 /* Enable burst mode chip Tx DMA */
1283 register_bank(iobase, 1);
1284 outb(inb(iobase + IRCC_SCE_CFGB) | IRCC_CFGB_DMA_ENABLE |
1285 IRCC_CFGB_DMA_BURST, iobase + IRCC_SCE_CFGB);
1287 /* Setup DMA controller (must be done after enabling chip DMA) */
1288 irda_setup_dma(self->io.dma, self->tx_buff_dma, self->tx_buff.len,
1291 /* Enable interrupt */
1293 register_bank(iobase, 0);
1294 outb(IRCC_IER_ACTIVE_FRAME | IRCC_IER_EOM, iobase + IRCC_IER);
1295 outb(IRCC_MASTER_INT_EN, iobase + IRCC_MASTER);
1297 /* Enable transmit */
1298 outb(IRCC_LCR_B_SCE_TRANSMIT | IRCC_LCR_B_SIP_ENABLE, iobase + IRCC_LCR_B);
1302 * Function smsc_ircc_dma_xmit_complete (self)
1304 * The transfer of a frame in finished. This function will only be called
1305 * by the interrupt handler
1308 static void smsc_ircc_dma_xmit_complete(struct smsc_ircc_cb *self)
1310 int iobase = self->io.fir_base;
1312 pr_debug("%s\n", __func__);
1315 register_bank(iobase, 0);
1316 outb(0x00, iobase + IRCC_LCR_B);
1318 register_bank(iobase, 1);
1319 outb(inb(iobase + IRCC_SCE_CFGB) & ~IRCC_CFGB_DMA_ENABLE,
1320 iobase + IRCC_SCE_CFGB);
1322 /* Check for underrun! */
1323 register_bank(iobase, 0);
1324 if (inb(iobase + IRCC_LSR) & IRCC_LSR_UNDERRUN) {
1325 self->netdev->stats.tx_errors++;
1326 self->netdev->stats.tx_fifo_errors++;
1328 /* Reset error condition */
1329 register_bank(iobase, 0);
1330 outb(IRCC_MASTER_ERROR_RESET, iobase + IRCC_MASTER);
1331 outb(0x00, iobase + IRCC_MASTER);
1333 self->netdev->stats.tx_packets++;
1334 self->netdev->stats.tx_bytes += self->tx_buff.len;
1337 /* Check if it's time to change the speed */
1338 if (self->new_speed) {
1339 smsc_ircc_change_speed(self, self->new_speed);
1340 self->new_speed = 0;
1343 netif_wake_queue(self->netdev);
1347 * Function smsc_ircc_dma_receive(self)
1349 * Get ready for receiving a frame. The device will initiate a DMA
1350 * if it starts to receive a frame.
1353 static int smsc_ircc_dma_receive(struct smsc_ircc_cb *self)
1355 int iobase = self->io.fir_base;
1357 /* Turn off chip DMA */
1358 register_bank(iobase, 1);
1359 outb(inb(iobase + IRCC_SCE_CFGB) & ~IRCC_CFGB_DMA_ENABLE,
1360 iobase + IRCC_SCE_CFGB);
1364 register_bank(iobase, 0);
1365 outb(0x00, iobase + IRCC_LCR_B);
1367 /* Turn off chip DMA */
1368 register_bank(iobase, 1);
1369 outb(inb(iobase + IRCC_SCE_CFGB) & ~IRCC_CFGB_DMA_ENABLE,
1370 iobase + IRCC_SCE_CFGB);
1372 self->io.direction = IO_RECV;
1373 self->rx_buff.data = self->rx_buff.head;
1375 /* Set max Rx frame size */
1376 register_bank(iobase, 4);
1377 outb((2050 >> 8) & 0x0f, iobase + IRCC_RX_SIZE_HI);
1378 outb(2050 & 0xff, iobase + IRCC_RX_SIZE_LO);
1380 /* Setup DMA controller */
1381 irda_setup_dma(self->io.dma, self->rx_buff_dma, self->rx_buff.truesize,
1384 /* Enable burst mode chip Rx DMA */
1385 register_bank(iobase, 1);
1386 outb(inb(iobase + IRCC_SCE_CFGB) | IRCC_CFGB_DMA_ENABLE |
1387 IRCC_CFGB_DMA_BURST, iobase + IRCC_SCE_CFGB);
1389 /* Enable interrupt */
1390 register_bank(iobase, 0);
1391 outb(IRCC_IER_ACTIVE_FRAME | IRCC_IER_EOM, iobase + IRCC_IER);
1392 outb(IRCC_MASTER_INT_EN, iobase + IRCC_MASTER);
1394 /* Enable receiver */
1395 register_bank(iobase, 0);
1396 outb(IRCC_LCR_B_SCE_RECEIVE | IRCC_LCR_B_SIP_ENABLE,
1397 iobase + IRCC_LCR_B);
1403 * Function smsc_ircc_dma_receive_complete(self)
1405 * Finished with receiving frames
1408 static void smsc_ircc_dma_receive_complete(struct smsc_ircc_cb *self)
1410 struct sk_buff *skb;
1411 int len, msgcnt, lsr;
1412 int iobase = self->io.fir_base;
1414 register_bank(iobase, 0);
1416 pr_debug("%s\n", __func__);
1419 register_bank(iobase, 0);
1420 outb(0x00, iobase + IRCC_LCR_B);
1422 register_bank(iobase, 0);
1423 outb(inb(iobase + IRCC_LSAR) & ~IRCC_LSAR_ADDRESS_MASK, iobase + IRCC_LSAR);
1424 lsr= inb(iobase + IRCC_LSR);
1425 msgcnt = inb(iobase + IRCC_LCR_B) & 0x08;
1427 pr_debug("%s: dma count = %d\n", __func__,
1428 get_dma_residue(self->io.dma));
1430 len = self->rx_buff.truesize - get_dma_residue(self->io.dma);
1432 /* Look for errors */
1433 if (lsr & (IRCC_LSR_FRAME_ERROR | IRCC_LSR_CRC_ERROR | IRCC_LSR_SIZE_ERROR)) {
1434 self->netdev->stats.rx_errors++;
1435 if (lsr & IRCC_LSR_FRAME_ERROR)
1436 self->netdev->stats.rx_frame_errors++;
1437 if (lsr & IRCC_LSR_CRC_ERROR)
1438 self->netdev->stats.rx_crc_errors++;
1439 if (lsr & IRCC_LSR_SIZE_ERROR)
1440 self->netdev->stats.rx_length_errors++;
1441 if (lsr & (IRCC_LSR_UNDERRUN | IRCC_LSR_OVERRUN))
1442 self->netdev->stats.rx_length_errors++;
1447 len -= self->io.speed < 4000000 ? 2 : 4;
1449 if (len < 2 || len > 2050) {
1450 net_warn_ratelimited("%s(), bogus len=%d\n", __func__, len);
1453 pr_debug("%s: msgcnt = %d, len=%d\n", __func__, msgcnt, len);
1455 skb = dev_alloc_skb(len + 1);
1459 /* Make sure IP header gets aligned */
1460 skb_reserve(skb, 1);
1462 memcpy(skb_put(skb, len), self->rx_buff.data, len);
1463 self->netdev->stats.rx_packets++;
1464 self->netdev->stats.rx_bytes += len;
1466 skb->dev = self->netdev;
1467 skb_reset_mac_header(skb);
1468 skb->protocol = htons(ETH_P_IRDA);
1473 * Function smsc_ircc_sir_receive (self)
1475 * Receive one frame from the infrared port
1478 static void smsc_ircc_sir_receive(struct smsc_ircc_cb *self)
1483 IRDA_ASSERT(self != NULL, return;);
1485 iobase = self->io.sir_base;
1488 * Receive all characters in Rx FIFO, unwrap and unstuff them.
1489 * async_unwrap_char will deliver all found frames
1492 async_unwrap_char(self->netdev, &self->netdev->stats, &self->rx_buff,
1493 inb(iobase + UART_RX));
1495 /* Make sure we don't stay here to long */
1496 if (boguscount++ > 32) {
1497 pr_debug("%s(), breaking!\n", __func__);
1500 } while (inb(iobase + UART_LSR) & UART_LSR_DR);
1505 * Function smsc_ircc_interrupt (irq, dev_id, regs)
1507 * An interrupt from the chip has arrived. Time to do some work
1510 static irqreturn_t smsc_ircc_interrupt(int dummy, void *dev_id)
1512 struct net_device *dev = dev_id;
1513 struct smsc_ircc_cb *self = netdev_priv(dev);
1514 int iobase, iir, lcra, lsr;
1515 irqreturn_t ret = IRQ_NONE;
1517 /* Serialise the interrupt handler in various CPUs, stop Tx path */
1518 spin_lock(&self->lock);
1520 /* Check if we should use the SIR interrupt handler */
1521 if (self->io.speed <= SMSC_IRCC2_MAX_SIR_SPEED) {
1522 ret = smsc_ircc_interrupt_sir(dev);
1523 goto irq_ret_unlock;
1526 iobase = self->io.fir_base;
1528 register_bank(iobase, 0);
1529 iir = inb(iobase + IRCC_IIR);
1531 goto irq_ret_unlock;
1534 /* Disable interrupts */
1535 outb(0, iobase + IRCC_IER);
1536 lcra = inb(iobase + IRCC_LCR_A);
1537 lsr = inb(iobase + IRCC_LSR);
1539 pr_debug("%s(), iir = 0x%02x\n", __func__, iir);
1541 if (iir & IRCC_IIR_EOM) {
1542 if (self->io.direction == IO_RECV)
1543 smsc_ircc_dma_receive_complete(self);
1545 smsc_ircc_dma_xmit_complete(self);
1547 smsc_ircc_dma_receive(self);
1550 if (iir & IRCC_IIR_ACTIVE_FRAME) {
1551 /*printk(KERN_WARNING "%s(): Active Frame\n", __func__);*/
1554 /* Enable interrupts again */
1556 register_bank(iobase, 0);
1557 outb(IRCC_IER_ACTIVE_FRAME | IRCC_IER_EOM, iobase + IRCC_IER);
1560 spin_unlock(&self->lock);
1566 * Function irport_interrupt_sir (irq, dev_id)
1568 * Interrupt handler for SIR modes
1570 static irqreturn_t smsc_ircc_interrupt_sir(struct net_device *dev)
1572 struct smsc_ircc_cb *self = netdev_priv(dev);
1577 /* Already locked coming here in smsc_ircc_interrupt() */
1578 /*spin_lock(&self->lock);*/
1580 iobase = self->io.sir_base;
1582 iir = inb(iobase + UART_IIR) & UART_IIR_ID;
1586 /* Clear interrupt */
1587 lsr = inb(iobase + UART_LSR);
1589 pr_debug("%s(), iir=%02x, lsr=%02x, iobase=%#x\n",
1590 __func__, iir, lsr, iobase);
1594 pr_debug("%s(), RLSI\n", __func__);
1597 /* Receive interrupt */
1598 smsc_ircc_sir_receive(self);
1601 if (lsr & UART_LSR_THRE)
1602 /* Transmitter ready for data */
1603 smsc_ircc_sir_write_wakeup(self);
1606 pr_debug("%s(), unhandled IIR=%#x\n",
1611 /* Make sure we don't stay here to long */
1612 if (boguscount++ > 100)
1615 iir = inb(iobase + UART_IIR) & UART_IIR_ID;
1617 /*spin_unlock(&self->lock);*/
1624 * Function ircc_is_receiving (self)
1626 * Return TRUE is we are currently receiving a frame
1629 static int ircc_is_receiving(struct smsc_ircc_cb *self)
1634 pr_debug("%s\n", __func__);
1636 IRDA_ASSERT(self != NULL, return FALSE;);
1638 pr_debug("%s: dma count = %d\n", __func__,
1639 get_dma_residue(self->io.dma));
1641 status = (self->rx_buff.state != OUTSIDE_FRAME);
1647 static int smsc_ircc_request_irq(struct smsc_ircc_cb *self)
1651 error = request_irq(self->io.irq, smsc_ircc_interrupt, 0,
1652 self->netdev->name, self->netdev);
1654 pr_debug("%s(), unable to allocate irq=%d, err=%d\n",
1655 __func__, self->io.irq, error);
1660 static void smsc_ircc_start_interrupts(struct smsc_ircc_cb *self)
1662 unsigned long flags;
1664 spin_lock_irqsave(&self->lock, flags);
1667 smsc_ircc_change_speed(self, SMSC_IRCC2_C_IRDA_FALLBACK_SPEED);
1669 spin_unlock_irqrestore(&self->lock, flags);
1672 static void smsc_ircc_stop_interrupts(struct smsc_ircc_cb *self)
1674 int iobase = self->io.fir_base;
1675 unsigned long flags;
1677 spin_lock_irqsave(&self->lock, flags);
1679 register_bank(iobase, 0);
1680 outb(0, iobase + IRCC_IER);
1681 outb(IRCC_MASTER_RESET, iobase + IRCC_MASTER);
1682 outb(0x00, iobase + IRCC_MASTER);
1684 spin_unlock_irqrestore(&self->lock, flags);
1689 * Function smsc_ircc_net_open (dev)
1694 static int smsc_ircc_net_open(struct net_device *dev)
1696 struct smsc_ircc_cb *self;
1699 pr_debug("%s\n", __func__);
1701 IRDA_ASSERT(dev != NULL, return -1;);
1702 self = netdev_priv(dev);
1703 IRDA_ASSERT(self != NULL, return 0;);
1705 if (self->io.suspended) {
1706 pr_debug("%s(), device is suspended\n", __func__);
1710 if (request_irq(self->io.irq, smsc_ircc_interrupt, 0, dev->name,
1712 pr_debug("%s(), unable to allocate irq=%d\n",
1713 __func__, self->io.irq);
1717 smsc_ircc_start_interrupts(self);
1719 /* Give self a hardware name */
1720 /* It would be cool to offer the chip revision here - Jean II */
1721 sprintf(hwname, "SMSC @ 0x%03x", self->io.fir_base);
1724 * Open new IrLAP layer instance, now that everything should be
1725 * initialized properly
1727 self->irlap = irlap_open(dev, &self->qos, hwname);
1730 * Always allocate the DMA channel after the IRQ,
1731 * and clean up on failure.
1733 if (request_dma(self->io.dma, dev->name)) {
1734 smsc_ircc_net_close(dev);
1736 net_warn_ratelimited("%s(), unable to allocate DMA=%d\n",
1737 __func__, self->io.dma);
1741 netif_start_queue(dev);
1747 * Function smsc_ircc_net_close (dev)
1752 static int smsc_ircc_net_close(struct net_device *dev)
1754 struct smsc_ircc_cb *self;
1756 pr_debug("%s\n", __func__);
1758 IRDA_ASSERT(dev != NULL, return -1;);
1759 self = netdev_priv(dev);
1760 IRDA_ASSERT(self != NULL, return 0;);
1763 netif_stop_queue(dev);
1765 /* Stop and remove instance of IrLAP */
1767 irlap_close(self->irlap);
1770 smsc_ircc_stop_interrupts(self);
1772 /* if we are called from smsc_ircc_resume we don't have IRQ reserved */
1773 if (!self->io.suspended)
1774 free_irq(self->io.irq, dev);
1776 disable_dma(self->io.dma);
1777 free_dma(self->io.dma);
1782 static int smsc_ircc_suspend(struct platform_device *dev, pm_message_t state)
1784 struct smsc_ircc_cb *self = platform_get_drvdata(dev);
1786 if (!self->io.suspended) {
1787 pr_debug("%s, Suspending\n", driver_name);
1790 if (netif_running(self->netdev)) {
1791 netif_device_detach(self->netdev);
1792 smsc_ircc_stop_interrupts(self);
1793 free_irq(self->io.irq, self->netdev);
1794 disable_dma(self->io.dma);
1796 self->io.suspended = 1;
1803 static int smsc_ircc_resume(struct platform_device *dev)
1805 struct smsc_ircc_cb *self = platform_get_drvdata(dev);
1807 if (self->io.suspended) {
1808 pr_debug("%s, Waking up\n", driver_name);
1811 smsc_ircc_init_chip(self);
1812 if (netif_running(self->netdev)) {
1813 if (smsc_ircc_request_irq(self)) {
1815 * Don't fail resume process, just kill this
1818 unregister_netdevice(self->netdev);
1820 enable_dma(self->io.dma);
1821 smsc_ircc_start_interrupts(self);
1822 netif_device_attach(self->netdev);
1825 self->io.suspended = 0;
1832 * Function smsc_ircc_close (self)
1834 * Close driver instance
1837 static int __exit smsc_ircc_close(struct smsc_ircc_cb *self)
1839 pr_debug("%s\n", __func__);
1841 IRDA_ASSERT(self != NULL, return -1;);
1843 platform_device_unregister(self->pldev);
1845 /* Remove netdevice */
1846 unregister_netdev(self->netdev);
1848 smsc_ircc_stop_interrupts(self);
1850 /* Release the PORTS that this driver is using */
1851 pr_debug("%s(), releasing 0x%03x\n", __func__,
1854 release_region(self->io.fir_base, self->io.fir_ext);
1856 pr_debug("%s(), releasing 0x%03x\n", __func__,
1859 release_region(self->io.sir_base, self->io.sir_ext);
1861 if (self->tx_buff.head)
1862 dma_free_coherent(NULL, self->tx_buff.truesize,
1863 self->tx_buff.head, self->tx_buff_dma);
1865 if (self->rx_buff.head)
1866 dma_free_coherent(NULL, self->rx_buff.truesize,
1867 self->rx_buff.head, self->rx_buff_dma);
1869 free_netdev(self->netdev);
1874 static void __exit smsc_ircc_cleanup(void)
1878 pr_debug("%s\n", __func__);
1880 for (i = 0; i < 2; i++) {
1882 smsc_ircc_close(dev_self[i]);
1885 if (pnp_driver_registered)
1886 pnp_unregister_driver(&smsc_ircc_pnp_driver);
1888 platform_driver_unregister(&smsc_ircc_driver);
1892 * Start SIR operations
1894 * This function *must* be called with spinlock held, because it may
1895 * be called from the irq handler (via smsc_ircc_change_speed()). - Jean II
1897 static void smsc_ircc_sir_start(struct smsc_ircc_cb *self)
1899 struct net_device *dev;
1900 int fir_base, sir_base;
1902 pr_debug("%s\n", __func__);
1904 IRDA_ASSERT(self != NULL, return;);
1906 IRDA_ASSERT(dev != NULL, return;);
1908 fir_base = self->io.fir_base;
1909 sir_base = self->io.sir_base;
1911 /* Reset everything */
1912 outb(IRCC_MASTER_RESET, fir_base + IRCC_MASTER);
1914 #if SMSC_IRCC2_C_SIR_STOP
1915 /*smsc_ircc_sir_stop(self);*/
1918 register_bank(fir_base, 1);
1919 outb(((inb(fir_base + IRCC_SCE_CFGA) & IRCC_SCE_CFGA_BLOCK_CTRL_BITS_MASK) | IRCC_CFGA_IRDA_SIR_A), fir_base + IRCC_SCE_CFGA);
1921 /* Initialize UART */
1922 outb(UART_LCR_WLEN8, sir_base + UART_LCR); /* Reset DLAB */
1923 outb((UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2), sir_base + UART_MCR);
1925 /* Turn on interrups */
1926 outb(UART_IER_RLSI | UART_IER_RDI |UART_IER_THRI, sir_base + UART_IER);
1928 pr_debug("%s() - exit\n", __func__);
1930 outb(0x00, fir_base + IRCC_MASTER);
1933 #if SMSC_IRCC2_C_SIR_STOP
1934 void smsc_ircc_sir_stop(struct smsc_ircc_cb *self)
1938 pr_debug("%s\n", __func__);
1939 iobase = self->io.sir_base;
1942 outb(0, iobase + UART_MCR);
1944 /* Turn off interrupts */
1945 outb(0, iobase + UART_IER);
1950 * Function smsc_sir_write_wakeup (self)
1952 * Called by the SIR interrupt handler when there's room for more data.
1953 * If we have more packets to send, we send them here.
1956 static void smsc_ircc_sir_write_wakeup(struct smsc_ircc_cb *self)
1962 IRDA_ASSERT(self != NULL, return;);
1964 pr_debug("%s\n", __func__);
1966 iobase = self->io.sir_base;
1968 /* Finished with frame? */
1969 if (self->tx_buff.len > 0) {
1970 /* Write data left in transmit buffer */
1971 actual = smsc_ircc_sir_write(iobase, self->io.fifo_size,
1972 self->tx_buff.data, self->tx_buff.len);
1973 self->tx_buff.data += actual;
1974 self->tx_buff.len -= actual;
1977 /*if (self->tx_buff.len ==0) {*/
1980 * Now serial buffer is almost free & we can start
1981 * transmission of another packet. But first we must check
1982 * if we need to change the speed of the hardware
1984 if (self->new_speed) {
1985 pr_debug("%s(), Changing speed to %d.\n",
1986 __func__, self->new_speed);
1987 smsc_ircc_sir_wait_hw_transmitter_finish(self);
1988 smsc_ircc_change_speed(self, self->new_speed);
1989 self->new_speed = 0;
1991 /* Tell network layer that we want more frames */
1992 netif_wake_queue(self->netdev);
1994 self->netdev->stats.tx_packets++;
1996 if (self->io.speed <= 115200) {
1998 * Reset Rx FIFO to make sure that all reflected transmit data
1999 * is discarded. This is needed for half duplex operation
2001 fcr = UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR;
2002 fcr |= self->io.speed < 38400 ?
2003 UART_FCR_TRIGGER_1 : UART_FCR_TRIGGER_14;
2005 outb(fcr, iobase + UART_FCR);
2007 /* Turn on receive interrupts */
2008 outb(UART_IER_RDI, iobase + UART_IER);
2014 * Function smsc_ircc_sir_write (iobase, fifo_size, buf, len)
2016 * Fill Tx FIFO with transmit data
2019 static int smsc_ircc_sir_write(int iobase, int fifo_size, __u8 *buf, int len)
2023 /* Tx FIFO should be empty! */
2024 if (!(inb(iobase + UART_LSR) & UART_LSR_THRE)) {
2025 net_warn_ratelimited("%s(), failed, fifo not empty!\n",
2030 /* Fill FIFO with current frame */
2031 while (fifo_size-- > 0 && actual < len) {
2032 /* Transmit next byte */
2033 outb(buf[actual], iobase + UART_TX);
2040 * Function smsc_ircc_is_receiving (self)
2042 * Returns true is we are currently receiving data
2045 static int smsc_ircc_is_receiving(struct smsc_ircc_cb *self)
2047 return self->rx_buff.state != OUTSIDE_FRAME;
2052 * Function smsc_ircc_probe_transceiver(self)
2054 * Tries to find the used Transceiver
2057 static void smsc_ircc_probe_transceiver(struct smsc_ircc_cb *self)
2061 IRDA_ASSERT(self != NULL, return;);
2063 for (i = 0; smsc_transceivers[i].name != NULL; i++)
2064 if (smsc_transceivers[i].probe(self->io.fir_base)) {
2065 net_info_ratelimited(" %s transceiver found\n",
2066 smsc_transceivers[i].name);
2067 self->transceiver= i + 1;
2071 net_info_ratelimited("No transceiver found. Defaulting to %s\n",
2072 smsc_transceivers[SMSC_IRCC2_C_DEFAULT_TRANSCEIVER].name);
2074 self->transceiver = SMSC_IRCC2_C_DEFAULT_TRANSCEIVER;
2079 * Function smsc_ircc_set_transceiver_for_speed(self, speed)
2081 * Set the transceiver according to the speed
2084 static void smsc_ircc_set_transceiver_for_speed(struct smsc_ircc_cb *self, u32 speed)
2088 trx = self->transceiver;
2090 smsc_transceivers[trx - 1].set_for_speed(self->io.fir_base, speed);
2094 * Function smsc_ircc_wait_hw_transmitter_finish ()
2096 * Wait for the real end of HW transmission
2098 * The UART is a strict FIFO, and we get called only when we have finished
2099 * pushing data to the FIFO, so the maximum amount of time we must wait
2100 * is only for the FIFO to drain out.
2102 * We use a simple calibrated loop. We may need to adjust the loop
2103 * delay (udelay) to balance I/O traffic and latency. And we also need to
2104 * adjust the maximum timeout.
2105 * It would probably be better to wait for the proper interrupt,
2106 * but it doesn't seem to be available.
2108 * We can't use jiffies or kernel timers because :
2109 * 1) We are called from the interrupt handler, which disable softirqs,
2110 * so jiffies won't be increased
2111 * 2) Jiffies granularity is usually very coarse (10ms), and we don't
2112 * want to wait that long to detect stuck hardware.
2116 static void smsc_ircc_sir_wait_hw_transmitter_finish(struct smsc_ircc_cb *self)
2118 int iobase = self->io.sir_base;
2119 int count = SMSC_IRCC2_HW_TRANSMITTER_TIMEOUT_US;
2121 /* Calibrated busy loop */
2122 while (count-- > 0 && !(inb(iobase + UART_LSR) & UART_LSR_TEMT))
2126 pr_debug("%s(): stuck transmitter\n", __func__);
2132 * REVISIT we can be told about the device by PNP, and should use that info
2133 * instead of probing hardware and creating a platform_device ...
2136 static int __init smsc_ircc_look_for_chips(void)
2138 struct smsc_chip_address *address;
2140 unsigned int cfg_base, found;
2143 address = possible_addresses;
2145 while (address->cfg_base) {
2146 cfg_base = address->cfg_base;
2148 /*printk(KERN_WARNING "%s(): probing: 0x%02x for: 0x%02x\n", __func__, cfg_base, address->type);*/
2150 if (address->type & SMSCSIO_TYPE_FDC) {
2152 if (address->type & SMSCSIO_TYPE_FLAT)
2153 if (!smsc_superio_flat(fdc_chips_flat, cfg_base, type))
2156 if (address->type & SMSCSIO_TYPE_PAGED)
2157 if (!smsc_superio_paged(fdc_chips_paged, cfg_base, type))
2160 if (address->type & SMSCSIO_TYPE_LPC) {
2162 if (address->type & SMSCSIO_TYPE_FLAT)
2163 if (!smsc_superio_flat(lpc_chips_flat, cfg_base, type))
2166 if (address->type & SMSCSIO_TYPE_PAGED)
2167 if (!smsc_superio_paged(lpc_chips_paged, cfg_base, type))
2176 * Function smsc_superio_flat (chip, base, type)
2178 * Try to get configuration of a smc SuperIO chip with flat register model
2181 static int __init smsc_superio_flat(const struct smsc_chip *chips, unsigned short cfgbase, char *type)
2183 unsigned short firbase, sirbase;
2187 pr_debug("%s\n", __func__);
2189 if (smsc_ircc_probe(cfgbase, SMSCSIOFLAT_DEVICEID_REG, chips, type) == NULL)
2192 outb(SMSCSIOFLAT_UARTMODE0C_REG, cfgbase);
2193 mode = inb(cfgbase + 1);
2195 /*printk(KERN_WARNING "%s(): mode: 0x%02x\n", __func__, mode);*/
2197 if (!(mode & SMSCSIOFLAT_UART2MODE_VAL_IRDA))
2198 net_warn_ratelimited("%s(): IrDA not enabled\n", __func__);
2200 outb(SMSCSIOFLAT_UART2BASEADDR_REG, cfgbase);
2201 sirbase = inb(cfgbase + 1) << 2;
2204 outb(SMSCSIOFLAT_FIRBASEADDR_REG, cfgbase);
2205 firbase = inb(cfgbase + 1) << 3;
2208 outb(SMSCSIOFLAT_FIRDMASELECT_REG, cfgbase);
2209 dma = inb(cfgbase + 1) & SMSCSIOFLAT_FIRDMASELECT_MASK;
2212 outb(SMSCSIOFLAT_UARTIRQSELECT_REG, cfgbase);
2213 irq = inb(cfgbase + 1) & SMSCSIOFLAT_UART2IRQSELECT_MASK;
2215 net_info_ratelimited("%s(): fir: 0x%02x, sir: 0x%02x, dma: %02d, irq: %d, mode: 0x%02x\n",
2216 __func__, firbase, sirbase, dma, irq, mode);
2218 if (firbase && smsc_ircc_open(firbase, sirbase, dma, irq) == 0)
2221 /* Exit configuration */
2222 outb(SMSCSIO_CFGEXITKEY, cfgbase);
2228 * Function smsc_superio_paged (chip, base, type)
2230 * Try to get configuration of a smc SuperIO chip with paged register model
2233 static int __init smsc_superio_paged(const struct smsc_chip *chips, unsigned short cfg_base, char *type)
2235 unsigned short fir_io, sir_io;
2238 pr_debug("%s\n", __func__);
2240 if (smsc_ircc_probe(cfg_base, 0x20, chips, type) == NULL)
2243 /* Select logical device (UART2) */
2244 outb(0x07, cfg_base);
2245 outb(0x05, cfg_base + 1);
2248 outb(0x60, cfg_base);
2249 sir_io = inb(cfg_base + 1) << 8;
2250 outb(0x61, cfg_base);
2251 sir_io |= inb(cfg_base + 1);
2254 outb(0x62, cfg_base);
2255 fir_io = inb(cfg_base + 1) << 8;
2256 outb(0x63, cfg_base);
2257 fir_io |= inb(cfg_base + 1);
2258 outb(0x2b, cfg_base); /* ??? */
2260 if (fir_io && smsc_ircc_open(fir_io, sir_io, ircc_dma, ircc_irq) == 0)
2263 /* Exit configuration */
2264 outb(SMSCSIO_CFGEXITKEY, cfg_base);
2270 static int __init smsc_access(unsigned short cfg_base, unsigned char reg)
2272 pr_debug("%s\n", __func__);
2274 outb(reg, cfg_base);
2275 return inb(cfg_base) != reg ? -1 : 0;
2278 static const struct smsc_chip * __init smsc_ircc_probe(unsigned short cfg_base, u8 reg, const struct smsc_chip *chip, char *type)
2280 u8 devid, xdevid, rev;
2282 pr_debug("%s\n", __func__);
2284 /* Leave configuration */
2286 outb(SMSCSIO_CFGEXITKEY, cfg_base);
2288 if (inb(cfg_base) == SMSCSIO_CFGEXITKEY) /* not a smc superio chip */
2291 outb(reg, cfg_base);
2293 xdevid = inb(cfg_base + 1);
2295 /* Enter configuration */
2297 outb(SMSCSIO_CFGACCESSKEY, cfg_base);
2300 if (smsc_access(cfg_base,0x55)) /* send second key and check */
2304 /* probe device ID */
2306 if (smsc_access(cfg_base, reg))
2309 devid = inb(cfg_base + 1);
2311 if (devid == 0 || devid == 0xff) /* typical values for unused port */
2314 /* probe revision ID */
2316 if (smsc_access(cfg_base, reg + 1))
2319 rev = inb(cfg_base + 1);
2321 if (rev >= 128) /* i think this will make no sense */
2324 if (devid == xdevid) /* protection against false positives */
2327 /* Check for expected device ID; are there others? */
2329 while (chip->devid != devid) {
2333 if (chip->name == NULL)
2337 net_info_ratelimited("found SMC SuperIO Chip (devid=0x%02x rev=%02X base=0x%04x): %s%s\n",
2338 devid, rev, cfg_base, type, chip->name);
2340 if (chip->rev > rev) {
2341 net_info_ratelimited("Revision higher than expected\n");
2345 if (chip->flags & NoIRDA)
2346 net_info_ratelimited("chipset does not support IRDA\n");
2351 static int __init smsc_superio_fdc(unsigned short cfg_base)
2355 if (!request_region(cfg_base, 2, driver_name)) {
2356 net_warn_ratelimited("%s: can't get cfg_base of 0x%03x\n",
2357 __func__, cfg_base);
2359 if (!smsc_superio_flat(fdc_chips_flat, cfg_base, "FDC") ||
2360 !smsc_superio_paged(fdc_chips_paged, cfg_base, "FDC"))
2363 release_region(cfg_base, 2);
2369 static int __init smsc_superio_lpc(unsigned short cfg_base)
2373 if (!request_region(cfg_base, 2, driver_name)) {
2374 net_warn_ratelimited("%s: can't get cfg_base of 0x%03x\n",
2375 __func__, cfg_base);
2377 if (!smsc_superio_flat(lpc_chips_flat, cfg_base, "LPC") ||
2378 !smsc_superio_paged(lpc_chips_paged, cfg_base, "LPC"))
2381 release_region(cfg_base, 2);
2387 * Look for some specific subsystem setups that need
2388 * pre-configuration not properly done by the BIOS (especially laptops)
2389 * This code is based in part on smcinit.c, tosh1800-smcinit.c
2390 * and tosh2450-smcinit.c. The table lists the device entries
2391 * for ISA bridges with an LPC (Low Pin Count) controller which
2392 * handles the communication with the SMSC device. After the LPC
2393 * controller is initialized through PCI, the SMSC device is initialized
2394 * through a dedicated port in the ISA port-mapped I/O area, this latter
2395 * area is used to configure the SMSC device with default
2396 * SIR and FIR I/O ports, DMA and IRQ. Different vendors have
2397 * used different sets of parameters and different control port
2398 * addresses making a subsystem device table necessary.
2401 static struct smsc_ircc_subsystem_configuration subsystem_configurations[] __initdata = {
2403 * Subsystems needing entries:
2404 * 0x10b9:0x1533 0x103c:0x0850 HP nx9010 family
2405 * 0x10b9:0x1533 0x0e11:0x005a Compaq nc4000 family
2406 * 0x8086:0x24cc 0x0e11:0x002a HP nx9000 family
2410 .vendor = PCI_VENDOR_ID_INTEL, /* Intel 82801DBM LPC bridge */
2412 .subvendor = 0x103c,
2413 .subdevice = 0x08bc,
2419 .preconfigure = preconfigure_through_82801,
2420 .name = "HP nx5000 family",
2423 .vendor = PCI_VENDOR_ID_INTEL, /* Intel 82801DBM LPC bridge */
2425 .subvendor = 0x103c,
2426 .subdevice = 0x088c,
2427 /* Quite certain these are the same for nc8000 as for nc6000 */
2433 .preconfigure = preconfigure_through_82801,
2434 .name = "HP nc8000 family",
2437 .vendor = PCI_VENDOR_ID_INTEL, /* Intel 82801DBM LPC bridge */
2439 .subvendor = 0x103c,
2440 .subdevice = 0x0890,
2446 .preconfigure = preconfigure_through_82801,
2447 .name = "HP nc6000 family",
2450 .vendor = PCI_VENDOR_ID_INTEL, /* Intel 82801DBM LPC bridge */
2452 .subvendor = 0x0e11,
2453 .subdevice = 0x0860,
2454 /* I assume these are the same for x1000 as for the others */
2460 .preconfigure = preconfigure_through_82801,
2461 .name = "Compaq x1000 family",
2464 /* Intel 82801DB/DBL (ICH4/ICH4-L) LPC Interface Bridge */
2465 .vendor = PCI_VENDOR_ID_INTEL,
2467 .subvendor = 0x1179,
2468 .subdevice = 0xffff, /* 0xffff is "any" */
2474 .preconfigure = preconfigure_through_82801,
2475 .name = "Toshiba laptop with Intel 82801DB/DBL LPC bridge",
2478 .vendor = PCI_VENDOR_ID_INTEL, /* Intel 82801CAM ISA bridge */
2480 .subvendor = 0x1179,
2481 .subdevice = 0xffff, /* 0xffff is "any" */
2487 .preconfigure = preconfigure_through_82801,
2488 .name = "Toshiba laptop with Intel 82801CAM ISA bridge",
2491 /* 82801DBM (ICH4-M) LPC Interface Bridge */
2492 .vendor = PCI_VENDOR_ID_INTEL,
2494 .subvendor = 0x1179,
2495 .subdevice = 0xffff, /* 0xffff is "any" */
2501 .preconfigure = preconfigure_through_82801,
2502 .name = "Toshiba laptop with Intel 8281DBM LPC bridge",
2505 /* ALi M1533/M1535 PCI to ISA Bridge [Aladdin IV/V/V+] */
2506 .vendor = PCI_VENDOR_ID_AL,
2508 .subvendor = 0x1179,
2509 .subdevice = 0xffff, /* 0xffff is "any" */
2515 .preconfigure = preconfigure_through_ali,
2516 .name = "Toshiba laptop with ALi ISA bridge",
2523 * This sets up the basic SMSC parameters
2524 * (FIR port, SIR port, FIR DMA, FIR IRQ)
2525 * through the chip configuration port.
2527 static int __init preconfigure_smsc_chip(struct
2528 smsc_ircc_subsystem_configuration
2531 unsigned short iobase = conf->cfg_base;
2532 unsigned char tmpbyte;
2534 outb(LPC47N227_CFGACCESSKEY, iobase); // enter configuration state
2535 outb(SMSCSIOFLAT_DEVICEID_REG, iobase); // set for device ID
2536 tmpbyte = inb(iobase +1); // Read device ID
2537 pr_debug("Detected Chip id: 0x%02x, setting up registers...\n",
2540 /* Disable UART1 and set up SIR I/O port */
2541 outb(0x24, iobase); // select CR24 - UART1 base addr
2542 outb(0x00, iobase + 1); // disable UART1
2543 outb(SMSCSIOFLAT_UART2BASEADDR_REG, iobase); // select CR25 - UART2 base addr
2544 outb( (conf->sir_io >> 2), iobase + 1); // bits 2-9 of 0x3f8
2545 tmpbyte = inb(iobase + 1);
2546 if (tmpbyte != (conf->sir_io >> 2) ) {
2547 net_warn_ratelimited("ERROR: could not configure SIR ioport\n");
2548 net_warn_ratelimited("Try to supply ircc_cfg argument\n");
2552 /* Set up FIR IRQ channel for UART2 */
2553 outb(SMSCSIOFLAT_UARTIRQSELECT_REG, iobase); // select CR28 - UART1,2 IRQ select
2554 tmpbyte = inb(iobase + 1);
2555 tmpbyte &= SMSCSIOFLAT_UART1IRQSELECT_MASK; // Do not touch the UART1 portion
2556 tmpbyte |= (conf->fir_irq & SMSCSIOFLAT_UART2IRQSELECT_MASK);
2557 outb(tmpbyte, iobase + 1);
2558 tmpbyte = inb(iobase + 1) & SMSCSIOFLAT_UART2IRQSELECT_MASK;
2559 if (tmpbyte != conf->fir_irq) {
2560 net_warn_ratelimited("ERROR: could not configure FIR IRQ channel\n");
2564 /* Set up FIR I/O port */
2565 outb(SMSCSIOFLAT_FIRBASEADDR_REG, iobase); // CR2B - SCE (FIR) base addr
2566 outb((conf->fir_io >> 3), iobase + 1);
2567 tmpbyte = inb(iobase + 1);
2568 if (tmpbyte != (conf->fir_io >> 3) ) {
2569 net_warn_ratelimited("ERROR: could not configure FIR I/O port\n");
2573 /* Set up FIR DMA channel */
2574 outb(SMSCSIOFLAT_FIRDMASELECT_REG, iobase); // CR2C - SCE (FIR) DMA select
2575 outb((conf->fir_dma & LPC47N227_FIRDMASELECT_MASK), iobase + 1); // DMA
2576 tmpbyte = inb(iobase + 1) & LPC47N227_FIRDMASELECT_MASK;
2577 if (tmpbyte != (conf->fir_dma & LPC47N227_FIRDMASELECT_MASK)) {
2578 net_warn_ratelimited("ERROR: could not configure FIR DMA channel\n");
2582 outb(SMSCSIOFLAT_UARTMODE0C_REG, iobase); // CR0C - UART mode
2583 tmpbyte = inb(iobase + 1);
2584 tmpbyte &= ~SMSCSIOFLAT_UART2MODE_MASK |
2585 SMSCSIOFLAT_UART2MODE_VAL_IRDA;
2586 outb(tmpbyte, iobase + 1); // enable IrDA (HPSIR) mode, high speed
2588 outb(LPC47N227_APMBOOTDRIVE_REG, iobase); // CR07 - Auto Pwr Mgt/boot drive sel
2589 tmpbyte = inb(iobase + 1);
2590 outb(tmpbyte | LPC47N227_UART2AUTOPWRDOWN_MASK, iobase + 1); // enable UART2 autopower down
2592 /* This one was not part of tosh1800 */
2593 outb(0x0a, iobase); // CR0a - ecp fifo / ir mux
2594 tmpbyte = inb(iobase + 1);
2595 outb(tmpbyte | 0x40, iobase + 1); // send active device to ir port
2597 outb(LPC47N227_UART12POWER_REG, iobase); // CR02 - UART 1,2 power
2598 tmpbyte = inb(iobase + 1);
2599 outb(tmpbyte | LPC47N227_UART2POWERDOWN_MASK, iobase + 1); // UART2 power up mode, UART1 power down
2601 outb(LPC47N227_FDCPOWERVALIDCONF_REG, iobase); // CR00 - FDC Power/valid config cycle
2602 tmpbyte = inb(iobase + 1);
2603 outb(tmpbyte | LPC47N227_VALID_MASK, iobase + 1); // valid config cycle done
2605 outb(LPC47N227_CFGEXITKEY, iobase); // Exit configuration
2610 /* 82801CAM generic registers */
2613 #define PIRQ_A_D_ROUT 0x60
2614 #define SIRQ_CNTL 0x64
2615 #define PIRQ_E_H_ROUT 0x68
2616 #define PCI_DMA_C 0x90
2617 /* LPC-specific registers */
2618 #define COM_DEC 0xe0
2619 #define GEN1_DEC 0xe4
2621 #define GEN2_DEC 0xec
2623 * Sets up the I/O range using the 82801CAM ISA bridge, 82801DBM LPC bridge
2624 * or Intel 82801DB/DBL (ICH4/ICH4-L) LPC Interface Bridge.
2625 * They all work the same way!
2627 static int __init preconfigure_through_82801(struct pci_dev *dev,
2629 smsc_ircc_subsystem_configuration
2632 unsigned short tmpword;
2633 unsigned char tmpbyte;
2635 net_info_ratelimited("Setting up Intel 82801 controller and SMSC device\n");
2637 * Select the range for the COMA COM port (SIR)
2640 * Bit 6-4, COMB decode range
2642 * Bit 2-0, COMA decode range
2645 * 000 = 0x3f8-0x3ff (COM1)
2646 * 001 = 0x2f8-0x2ff (COM2)
2650 * 101 = 0x2e8-0x2ef (COM4)
2652 * 111 = 0x3e8-0x3ef (COM3)
2654 pci_read_config_byte(dev, COM_DEC, &tmpbyte);
2655 tmpbyte &= 0xf8; /* mask COMA bits */
2656 switch(conf->sir_io) {
2682 tmpbyte |= 0x01; /* COM2 default */
2684 pr_debug("COM_DEC (write): 0x%02x\n", tmpbyte);
2685 pci_write_config_byte(dev, COM_DEC, tmpbyte);
2687 /* Enable Low Pin Count interface */
2688 pci_read_config_word(dev, LPC_EN, &tmpword);
2689 /* These seem to be set up at all times,
2690 * just make sure it is properly set.
2692 switch(conf->cfg_base) {
2706 net_warn_ratelimited("Uncommon I/O base address: 0x%04x\n",
2710 tmpword &= 0xfffd; /* disable LPC COMB */
2711 tmpword |= 0x0001; /* set bit 0 : enable LPC COMA addr range (GEN2) */
2712 pr_debug("LPC_EN (write): 0x%04x\n", tmpword);
2713 pci_write_config_word(dev, LPC_EN, tmpword);
2716 * Configure LPC DMA channel
2718 * Bit 15-14: DMA channel 7 select
2719 * Bit 13-12: DMA channel 6 select
2720 * Bit 11-10: DMA channel 5 select
2722 * Bit 7-6: DMA channel 3 select
2723 * Bit 5-4: DMA channel 2 select
2724 * Bit 3-2: DMA channel 1 select
2725 * Bit 1-0: DMA channel 0 select
2726 * 00 = Reserved value
2728 * 10 = Reserved value
2731 pci_read_config_word(dev, PCI_DMA_C, &tmpword);
2732 switch(conf->fir_dma) {
2755 break; /* do not change settings */
2757 pr_debug("PCI_DMA_C (write): 0x%04x\n", tmpword);
2758 pci_write_config_word(dev, PCI_DMA_C, tmpword);
2762 * Bit 15-4: Generic I/O range
2763 * Bit 3-1: reserved (read as 0)
2764 * Bit 0: enable GEN2 range on LPC I/F
2766 tmpword = conf->fir_io & 0xfff8;
2768 pr_debug("GEN2_DEC (write): 0x%04x\n", tmpword);
2769 pci_write_config_word(dev, GEN2_DEC, tmpword);
2771 /* Pre-configure chip */
2772 return preconfigure_smsc_chip(conf);
2776 * Pre-configure a certain port on the ALi 1533 bridge.
2777 * This is based on reverse-engineering since ALi does not
2778 * provide any data sheet for the 1533 chip.
2780 static void __init preconfigure_ali_port(struct pci_dev *dev,
2781 unsigned short port)
2784 /* These bits obviously control the different ports */
2786 unsigned char tmpbyte;
2807 net_err_ratelimited("Failed to configure unsupported port on ALi 1533 bridge: 0x%04x\n",
2812 pci_read_config_byte(dev, reg, &tmpbyte);
2813 /* Turn on the right bits */
2815 pci_write_config_byte(dev, reg, tmpbyte);
2816 net_info_ratelimited("Activated ALi 1533 ISA bridge port 0x%04x\n",
2820 static int __init preconfigure_through_ali(struct pci_dev *dev,
2822 smsc_ircc_subsystem_configuration
2825 /* Configure the two ports on the ALi 1533 */
2826 preconfigure_ali_port(dev, conf->sir_io);
2827 preconfigure_ali_port(dev, conf->fir_io);
2829 /* Pre-configure chip */
2830 return preconfigure_smsc_chip(conf);
2833 static int __init smsc_ircc_preconfigure_subsystems(unsigned short ircc_cfg,
2834 unsigned short ircc_fir,
2835 unsigned short ircc_sir,
2836 unsigned char ircc_dma,
2837 unsigned char ircc_irq)
2839 struct pci_dev *dev = NULL;
2840 unsigned short ss_vendor = 0x0000;
2841 unsigned short ss_device = 0x0000;
2844 for_each_pci_dev(dev) {
2845 struct smsc_ircc_subsystem_configuration *conf;
2848 * Cache the subsystem vendor/device:
2849 * some manufacturers fail to set this for all components,
2850 * so we save it in case there is just 0x0000 0x0000 on the
2851 * device we want to check.
2853 if (dev->subsystem_vendor != 0x0000U) {
2854 ss_vendor = dev->subsystem_vendor;
2855 ss_device = dev->subsystem_device;
2857 conf = subsystem_configurations;
2858 for( ; conf->subvendor; conf++) {
2859 if(conf->vendor == dev->vendor &&
2860 conf->device == dev->device &&
2861 conf->subvendor == ss_vendor &&
2862 /* Sometimes these are cached values */
2863 (conf->subdevice == ss_device ||
2864 conf->subdevice == 0xffff)) {
2865 struct smsc_ircc_subsystem_configuration
2868 memcpy(&tmpconf, conf,
2869 sizeof(struct smsc_ircc_subsystem_configuration));
2872 * Override the default values with anything
2873 * passed in as parameter
2876 tmpconf.cfg_base = ircc_cfg;
2878 tmpconf.fir_io = ircc_fir;
2880 tmpconf.sir_io = ircc_sir;
2881 if (ircc_dma != DMA_INVAL)
2882 tmpconf.fir_dma = ircc_dma;
2883 if (ircc_irq != IRQ_INVAL)
2884 tmpconf.fir_irq = ircc_irq;
2886 net_info_ratelimited("Detected unconfigured %s SMSC IrDA chip, pre-configuring device\n",
2888 if (conf->preconfigure)
2889 ret = conf->preconfigure(dev, &tmpconf);
2898 #endif // CONFIG_PCI
2900 /************************************************
2902 * Transceivers specific functions
2904 ************************************************/
2908 * Function smsc_ircc_set_transceiver_smsc_ircc_atc(fir_base, speed)
2910 * Program transceiver through smsc-ircc ATC circuitry
2914 static void smsc_ircc_set_transceiver_smsc_ircc_atc(int fir_base, u32 speed)
2916 unsigned long jiffies_now, jiffies_timeout;
2919 jiffies_now = jiffies;
2920 jiffies_timeout = jiffies + SMSC_IRCC2_ATC_PROGRAMMING_TIMEOUT_JIFFIES;
2923 register_bank(fir_base, 4);
2924 outb((inb(fir_base + IRCC_ATC) & IRCC_ATC_MASK) | IRCC_ATC_nPROGREADY|IRCC_ATC_ENABLE,
2925 fir_base + IRCC_ATC);
2927 while ((val = (inb(fir_base + IRCC_ATC) & IRCC_ATC_nPROGREADY)) &&
2928 !time_after(jiffies, jiffies_timeout))
2932 net_warn_ratelimited("%s(): ATC: 0x%02x\n",
2933 __func__, inb(fir_base + IRCC_ATC));
2937 * Function smsc_ircc_probe_transceiver_smsc_ircc_atc(fir_base)
2939 * Probe transceiver smsc-ircc ATC circuitry
2943 static int smsc_ircc_probe_transceiver_smsc_ircc_atc(int fir_base)
2949 * Function smsc_ircc_set_transceiver_smsc_ircc_fast_pin_select(self, speed)
2955 static void smsc_ircc_set_transceiver_smsc_ircc_fast_pin_select(int fir_base, u32 speed)
2966 fast_mode = IRCC_LCR_A_FAST;
2969 register_bank(fir_base, 0);
2970 outb((inb(fir_base + IRCC_LCR_A) & 0xbf) | fast_mode, fir_base + IRCC_LCR_A);
2974 * Function smsc_ircc_probe_transceiver_smsc_ircc_fast_pin_select(fir_base)
2980 static int smsc_ircc_probe_transceiver_smsc_ircc_fast_pin_select(int fir_base)
2986 * Function smsc_ircc_set_transceiver_toshiba_sat1800(fir_base, speed)
2992 static void smsc_ircc_set_transceiver_toshiba_sat1800(int fir_base, u32 speed)
3003 fast_mode = /*IRCC_LCR_A_FAST |*/ IRCC_LCR_A_GP_DATA;
3007 /* This causes an interrupt */
3008 register_bank(fir_base, 0);
3009 outb((inb(fir_base + IRCC_LCR_A) & 0xbf) | fast_mode, fir_base + IRCC_LCR_A);
3013 * Function smsc_ircc_probe_transceiver_toshiba_sat1800(fir_base)
3019 static int smsc_ircc_probe_transceiver_toshiba_sat1800(int fir_base)
3025 module_init(smsc_ircc_init);
3026 module_exit(smsc_ircc_cleanup);