1 /*******************************************************************************
3 Intel 10 Gigabit PCI Express Linux driver
4 Copyright(c) 1999 - 2009 Intel Corporation.
6 This program is free software; you can redistribute it and/or modify it
7 under the terms and conditions of the GNU General Public License,
8 version 2, as published by the Free Software Foundation.
10 This program is distributed in the hope it will be useful, but WITHOUT
11 ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
12 FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
15 You should have received a copy of the GNU General Public License along with
16 this program; if not, write to the Free Software Foundation, Inc.,
17 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
19 The full GNU General Public License is included in this distribution in
20 the file called "COPYING".
23 e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
24 Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
26 *******************************************************************************/
28 #include <linux/pci.h>
29 #include <linux/delay.h>
30 #include <linux/sched.h>
33 #include "ixgbe_phy.h"
35 #define IXGBE_82598_MAX_TX_QUEUES 32
36 #define IXGBE_82598_MAX_RX_QUEUES 64
37 #define IXGBE_82598_RAR_ENTRIES 16
38 #define IXGBE_82598_MC_TBL_SIZE 128
39 #define IXGBE_82598_VFT_TBL_SIZE 128
41 static s32 ixgbe_get_copper_link_capabilities_82598(struct ixgbe_hw *hw,
42 ixgbe_link_speed *speed,
44 static s32 ixgbe_setup_copper_link_82598(struct ixgbe_hw *hw);
45 static s32 ixgbe_setup_copper_link_speed_82598(struct ixgbe_hw *hw,
46 ixgbe_link_speed speed,
48 bool autoneg_wait_to_complete);
49 static s32 ixgbe_read_i2c_eeprom_82598(struct ixgbe_hw *hw, u8 byte_offset,
53 * ixgbe_get_pcie_msix_count_82598 - Gets MSI-X vector count
54 * @hw: pointer to hardware structure
56 * Read PCIe configuration space, and get the MSI-X vector count from
57 * the capabilities table.
59 static u16 ixgbe_get_pcie_msix_count_82598(struct ixgbe_hw *hw)
61 struct ixgbe_adapter *adapter = hw->back;
63 pci_read_config_word(adapter->pdev, IXGBE_PCIE_MSIX_82598_CAPS,
65 msix_count &= IXGBE_PCIE_MSIX_TBL_SZ_MASK;
67 /* MSI-X count is zero-based in HW, so increment to give proper value */
75 static s32 ixgbe_get_invariants_82598(struct ixgbe_hw *hw)
77 struct ixgbe_mac_info *mac = &hw->mac;
79 /* Call PHY identify routine to get the phy type */
80 ixgbe_identify_phy_generic(hw);
82 mac->mcft_size = IXGBE_82598_MC_TBL_SIZE;
83 mac->vft_size = IXGBE_82598_VFT_TBL_SIZE;
84 mac->num_rar_entries = IXGBE_82598_RAR_ENTRIES;
85 mac->max_rx_queues = IXGBE_82598_MAX_RX_QUEUES;
86 mac->max_tx_queues = IXGBE_82598_MAX_TX_QUEUES;
87 mac->max_msix_vectors = ixgbe_get_pcie_msix_count_82598(hw);
93 * ixgbe_init_phy_ops_82598 - PHY/SFP specific init
94 * @hw: pointer to hardware structure
96 * Initialize any function pointers that were not able to be
97 * set during get_invariants because the PHY/SFP type was
98 * not known. Perform the SFP init if necessary.
101 s32 ixgbe_init_phy_ops_82598(struct ixgbe_hw *hw)
103 struct ixgbe_mac_info *mac = &hw->mac;
104 struct ixgbe_phy_info *phy = &hw->phy;
106 u16 list_offset, data_offset;
108 /* Identify the PHY */
109 phy->ops.identify(hw);
111 /* Overwrite the link function pointers if copper PHY */
112 if (mac->ops.get_media_type(hw) == ixgbe_media_type_copper) {
113 mac->ops.setup_link = &ixgbe_setup_copper_link_82598;
114 mac->ops.setup_link_speed =
115 &ixgbe_setup_copper_link_speed_82598;
116 mac->ops.get_link_capabilities =
117 &ixgbe_get_copper_link_capabilities_82598;
120 switch (hw->phy.type) {
122 phy->ops.check_link = &ixgbe_check_phy_link_tnx;
123 phy->ops.get_firmware_version =
124 &ixgbe_get_phy_firmware_version_tnx;
127 phy->ops.reset = &ixgbe_reset_phy_nl;
129 /* Call SFP+ identify routine to get the SFP+ module type */
130 ret_val = phy->ops.identify_sfp(hw);
133 else if (hw->phy.sfp_type == ixgbe_sfp_type_unknown) {
134 ret_val = IXGBE_ERR_SFP_NOT_SUPPORTED;
138 /* Check to see if SFP+ module is supported */
139 ret_val = ixgbe_get_sfp_init_sequence_offsets(hw,
143 ret_val = IXGBE_ERR_SFP_NOT_SUPPORTED;
156 * ixgbe_get_link_capabilities_82598 - Determines link capabilities
157 * @hw: pointer to hardware structure
158 * @speed: pointer to link speed
159 * @autoneg: boolean auto-negotiation value
161 * Determines the link capabilities by reading the AUTOC register.
163 static s32 ixgbe_get_link_capabilities_82598(struct ixgbe_hw *hw,
164 ixgbe_link_speed *speed,
171 * Determine link capabilities based on the stored value of AUTOC,
172 * which represents EEPROM defaults. If AUTOC value has not been
173 * stored, use the current register value.
175 if (hw->mac.orig_link_settings_stored)
176 autoc = hw->mac.orig_autoc;
178 autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC);
180 switch (autoc & IXGBE_AUTOC_LMS_MASK) {
181 case IXGBE_AUTOC_LMS_1G_LINK_NO_AN:
182 *speed = IXGBE_LINK_SPEED_1GB_FULL;
186 case IXGBE_AUTOC_LMS_10G_LINK_NO_AN:
187 *speed = IXGBE_LINK_SPEED_10GB_FULL;
191 case IXGBE_AUTOC_LMS_1G_AN:
192 *speed = IXGBE_LINK_SPEED_1GB_FULL;
196 case IXGBE_AUTOC_LMS_KX4_AN:
197 case IXGBE_AUTOC_LMS_KX4_AN_1G_AN:
198 *speed = IXGBE_LINK_SPEED_UNKNOWN;
199 if (autoc & IXGBE_AUTOC_KX4_SUPP)
200 *speed |= IXGBE_LINK_SPEED_10GB_FULL;
201 if (autoc & IXGBE_AUTOC_KX_SUPP)
202 *speed |= IXGBE_LINK_SPEED_1GB_FULL;
207 status = IXGBE_ERR_LINK_SETUP;
215 * ixgbe_get_copper_link_capabilities_82598 - Determines link capabilities
216 * @hw: pointer to hardware structure
217 * @speed: pointer to link speed
218 * @autoneg: boolean auto-negotiation value
220 * Determines the link capabilities by reading the AUTOC register.
222 static s32 ixgbe_get_copper_link_capabilities_82598(struct ixgbe_hw *hw,
223 ixgbe_link_speed *speed,
226 s32 status = IXGBE_ERR_LINK_SETUP;
232 status = hw->phy.ops.read_reg(hw, MDIO_SPEED, MDIO_MMD_PMAPMD,
236 if (speed_ability & MDIO_SPEED_10G)
237 *speed |= IXGBE_LINK_SPEED_10GB_FULL;
238 if (speed_ability & MDIO_PMA_SPEED_1000)
239 *speed |= IXGBE_LINK_SPEED_1GB_FULL;
246 * ixgbe_get_media_type_82598 - Determines media type
247 * @hw: pointer to hardware structure
249 * Returns the media type (fiber, copper, backplane)
251 static enum ixgbe_media_type ixgbe_get_media_type_82598(struct ixgbe_hw *hw)
253 enum ixgbe_media_type media_type;
255 /* Media type for I82598 is based on device ID */
256 switch (hw->device_id) {
257 case IXGBE_DEV_ID_82598:
258 case IXGBE_DEV_ID_82598_BX:
259 media_type = ixgbe_media_type_backplane;
261 case IXGBE_DEV_ID_82598AF_DUAL_PORT:
262 case IXGBE_DEV_ID_82598AF_SINGLE_PORT:
263 case IXGBE_DEV_ID_82598EB_CX4:
264 case IXGBE_DEV_ID_82598_CX4_DUAL_PORT:
265 case IXGBE_DEV_ID_82598_DA_DUAL_PORT:
266 case IXGBE_DEV_ID_82598_SR_DUAL_PORT_EM:
267 case IXGBE_DEV_ID_82598EB_XF_LR:
268 case IXGBE_DEV_ID_82598EB_SFP_LOM:
269 media_type = ixgbe_media_type_fiber;
271 case IXGBE_DEV_ID_82598AT:
272 media_type = ixgbe_media_type_copper;
275 media_type = ixgbe_media_type_unknown;
283 * ixgbe_fc_enable_82598 - Enable flow control
284 * @hw: pointer to hardware structure
285 * @packetbuf_num: packet buffer number (0-7)
287 * Enable flow control according to the current settings.
289 static s32 ixgbe_fc_enable_82598(struct ixgbe_hw *hw, s32 packetbuf_num)
296 fctrl_reg = IXGBE_READ_REG(hw, IXGBE_FCTRL);
297 fctrl_reg &= ~(IXGBE_FCTRL_RFCE | IXGBE_FCTRL_RPFCE);
299 rmcs_reg = IXGBE_READ_REG(hw, IXGBE_RMCS);
300 rmcs_reg &= ~(IXGBE_RMCS_TFCE_PRIORITY | IXGBE_RMCS_TFCE_802_3X);
303 * The possible values of fc.current_mode are:
304 * 0: Flow control is completely disabled
305 * 1: Rx flow control is enabled (we can receive pause frames,
306 * but not send pause frames).
307 * 2: Tx flow control is enabled (we can send pause frames but
308 * we do not support receiving pause frames).
309 * 3: Both Rx and Tx flow control (symmetric) are enabled.
312 switch (hw->fc.current_mode) {
314 /* Flow control completely disabled by software override. */
316 case ixgbe_fc_rx_pause:
318 * Rx Flow control is enabled and Tx Flow control is
319 * disabled by software override. Since there really
320 * isn't a way to advertise that we are capable of RX
321 * Pause ONLY, we will advertise that we support both
322 * symmetric and asymmetric Rx PAUSE. Later, we will
323 * disable the adapter's ability to send PAUSE frames.
325 fctrl_reg |= IXGBE_FCTRL_RFCE;
327 case ixgbe_fc_tx_pause:
329 * Tx Flow control is enabled, and Rx Flow control is
330 * disabled by software override.
332 rmcs_reg |= IXGBE_RMCS_TFCE_802_3X;
335 /* Flow control (both Rx and Tx) is enabled by SW override. */
336 fctrl_reg |= IXGBE_FCTRL_RFCE;
337 rmcs_reg |= IXGBE_RMCS_TFCE_802_3X;
340 hw_dbg(hw, "Flow control param set incorrectly\n");
341 ret_val = -IXGBE_ERR_CONFIG;
346 /* Enable 802.3x based flow control settings. */
347 fctrl_reg |= IXGBE_FCTRL_DPF;
348 IXGBE_WRITE_REG(hw, IXGBE_FCTRL, fctrl_reg);
349 IXGBE_WRITE_REG(hw, IXGBE_RMCS, rmcs_reg);
351 /* Set up and enable Rx high/low water mark thresholds, enable XON. */
352 if (hw->fc.current_mode & ixgbe_fc_tx_pause) {
353 if (hw->fc.send_xon) {
354 IXGBE_WRITE_REG(hw, IXGBE_FCRTL(packetbuf_num),
355 (hw->fc.low_water | IXGBE_FCRTL_XONE));
357 IXGBE_WRITE_REG(hw, IXGBE_FCRTL(packetbuf_num),
361 IXGBE_WRITE_REG(hw, IXGBE_FCRTH(packetbuf_num),
362 (hw->fc.high_water | IXGBE_FCRTH_FCEN));
365 /* Configure pause time (2 TCs per register) */
366 reg = IXGBE_READ_REG(hw, IXGBE_FCTTV(packetbuf_num / 2));
367 if ((packetbuf_num & 1) == 0)
368 reg = (reg & 0xFFFF0000) | hw->fc.pause_time;
370 reg = (reg & 0x0000FFFF) | (hw->fc.pause_time << 16);
371 IXGBE_WRITE_REG(hw, IXGBE_FCTTV(packetbuf_num / 2), reg);
373 IXGBE_WRITE_REG(hw, IXGBE_FCRTV, (hw->fc.pause_time >> 1));
380 * ixgbe_setup_fc_82598 - Configure flow control settings
381 * @hw: pointer to hardware structure
382 * @packetbuf_num: packet buffer number (0-7)
384 * Configures the flow control settings based on SW configuration. This
385 * function is used for 802.3x flow control configuration only.
387 static s32 ixgbe_setup_fc_82598(struct ixgbe_hw *hw, s32 packetbuf_num)
390 ixgbe_link_speed speed;
393 /* Validate the packetbuf configuration */
394 if (packetbuf_num < 0 || packetbuf_num > 7) {
395 hw_dbg(hw, "Invalid packet buffer number [%d], expected range is"
396 " 0-7\n", packetbuf_num);
397 ret_val = IXGBE_ERR_INVALID_LINK_SETTINGS;
402 * Validate the water mark configuration. Zero water marks are invalid
403 * because it causes the controller to just blast out fc packets.
405 if (!hw->fc.low_water || !hw->fc.high_water || !hw->fc.pause_time) {
406 if (hw->fc.requested_mode != ixgbe_fc_none) {
407 hw_dbg(hw, "Invalid water mark configuration\n");
408 ret_val = IXGBE_ERR_INVALID_LINK_SETTINGS;
414 * Validate the requested mode. Strict IEEE mode does not allow
415 * ixgbe_fc_rx_pause because it will cause testing anomalies.
417 if (hw->fc.strict_ieee && hw->fc.requested_mode == ixgbe_fc_rx_pause) {
418 hw_dbg(hw, "ixgbe_fc_rx_pause not valid in strict IEEE mode\n");
419 ret_val = IXGBE_ERR_INVALID_LINK_SETTINGS;
424 * 10gig parts do not have a word in the EEPROM to determine the
425 * default flow control setting, so we explicitly set it to full.
427 if (hw->fc.requested_mode == ixgbe_fc_default)
428 hw->fc.requested_mode = ixgbe_fc_full;
431 * Save off the requested flow control mode for use later. Depending
432 * on the link partner's capabilities, we may or may not use this mode.
435 hw->fc.current_mode = hw->fc.requested_mode;
437 /* Decide whether to use autoneg or not. */
438 hw->mac.ops.check_link(hw, &speed, &link_up, false);
439 if (!hw->fc.disable_fc_autoneg && hw->phy.multispeed_fiber &&
440 (speed == IXGBE_LINK_SPEED_1GB_FULL))
441 ret_val = ixgbe_fc_autoneg(hw);
446 ret_val = ixgbe_fc_enable_82598(hw, packetbuf_num);
453 * ixgbe_setup_mac_link_82598 - Configures MAC link settings
454 * @hw: pointer to hardware structure
456 * Configures link settings based on values in the ixgbe_hw struct.
457 * Restarts the link. Performs autonegotiation if needed.
459 static s32 ixgbe_setup_mac_link_82598(struct ixgbe_hw *hw)
467 autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC);
468 autoc_reg |= IXGBE_AUTOC_AN_RESTART;
469 IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc_reg);
471 /* Only poll for autoneg to complete if specified to do so */
472 if (hw->phy.autoneg_wait_to_complete) {
473 if ((autoc_reg & IXGBE_AUTOC_LMS_MASK) ==
474 IXGBE_AUTOC_LMS_KX4_AN ||
475 (autoc_reg & IXGBE_AUTOC_LMS_MASK) ==
476 IXGBE_AUTOC_LMS_KX4_AN_1G_AN) {
477 links_reg = 0; /* Just in case Autoneg time = 0 */
478 for (i = 0; i < IXGBE_AUTO_NEG_TIME; i++) {
479 links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS);
480 if (links_reg & IXGBE_LINKS_KX_AN_COMP)
484 if (!(links_reg & IXGBE_LINKS_KX_AN_COMP)) {
485 status = IXGBE_ERR_AUTONEG_NOT_COMPLETE;
486 hw_dbg(hw, "Autonegotiation did not complete.\n");
492 * We want to save off the original Flow Control configuration just in
493 * case we get disconnected and then reconnected into a different hub
494 * or switch with different Flow Control capabilities.
496 ixgbe_setup_fc_82598(hw, 0);
498 /* Add delay to filter out noises during initial link setup */
505 * ixgbe_check_mac_link_82598 - Get link/speed status
506 * @hw: pointer to hardware structure
507 * @speed: pointer to link speed
508 * @link_up: true is link is up, false otherwise
509 * @link_up_wait_to_complete: bool used to wait for link up or not
511 * Reads the links register to determine if link is up and the current speed
513 static s32 ixgbe_check_mac_link_82598(struct ixgbe_hw *hw,
514 ixgbe_link_speed *speed, bool *link_up,
515 bool link_up_wait_to_complete)
519 u16 link_reg, adapt_comp_reg;
522 * SERDES PHY requires us to read link status from register 0xC79F.
523 * Bit 0 set indicates link is up/ready; clear indicates link down.
524 * 0xC00C is read to check that the XAUI lanes are active. Bit 0
525 * clear indicates active; set indicates inactive.
527 if (hw->phy.type == ixgbe_phy_nl) {
528 hw->phy.ops.read_reg(hw, 0xC79F, MDIO_MMD_PMAPMD, &link_reg);
529 hw->phy.ops.read_reg(hw, 0xC79F, MDIO_MMD_PMAPMD, &link_reg);
530 hw->phy.ops.read_reg(hw, 0xC00C, MDIO_MMD_PMAPMD,
532 if (link_up_wait_to_complete) {
533 for (i = 0; i < IXGBE_LINK_UP_TIME; i++) {
534 if ((link_reg & 1) &&
535 ((adapt_comp_reg & 1) == 0)) {
542 hw->phy.ops.read_reg(hw, 0xC79F,
545 hw->phy.ops.read_reg(hw, 0xC00C,
550 if ((link_reg & 1) && ((adapt_comp_reg & 1) == 0))
556 if (*link_up == false)
560 links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS);
561 if (link_up_wait_to_complete) {
562 for (i = 0; i < IXGBE_LINK_UP_TIME; i++) {
563 if (links_reg & IXGBE_LINKS_UP) {
570 links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS);
573 if (links_reg & IXGBE_LINKS_UP)
579 if (links_reg & IXGBE_LINKS_SPEED)
580 *speed = IXGBE_LINK_SPEED_10GB_FULL;
582 *speed = IXGBE_LINK_SPEED_1GB_FULL;
590 * ixgbe_setup_mac_link_speed_82598 - Set MAC link speed
591 * @hw: pointer to hardware structure
592 * @speed: new link speed
593 * @autoneg: true if auto-negotiation enabled
594 * @autoneg_wait_to_complete: true if waiting is needed to complete
596 * Set the link speed in the AUTOC register and restarts link.
598 static s32 ixgbe_setup_mac_link_speed_82598(struct ixgbe_hw *hw,
599 ixgbe_link_speed speed, bool autoneg,
600 bool autoneg_wait_to_complete)
603 ixgbe_link_speed link_capabilities = IXGBE_LINK_SPEED_UNKNOWN;
604 u32 curr_autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC);
605 u32 autoc = curr_autoc;
606 u32 link_mode = autoc & IXGBE_AUTOC_LMS_MASK;
608 /* Check to see if speed passed in is supported. */
609 ixgbe_get_link_capabilities_82598(hw, &link_capabilities, &autoneg);
610 speed &= link_capabilities;
612 if (speed == IXGBE_LINK_SPEED_UNKNOWN)
613 status = IXGBE_ERR_LINK_SETUP;
615 /* Set KX4/KX support according to speed requested */
616 else if (link_mode == IXGBE_AUTOC_LMS_KX4_AN ||
617 link_mode == IXGBE_AUTOC_LMS_KX4_AN_1G_AN) {
618 autoc &= ~IXGBE_AUTOC_KX4_KX_SUPP_MASK;
619 if (speed & IXGBE_LINK_SPEED_10GB_FULL)
620 autoc |= IXGBE_AUTOC_KX4_SUPP;
621 if (speed & IXGBE_LINK_SPEED_1GB_FULL)
622 autoc |= IXGBE_AUTOC_KX_SUPP;
623 if (autoc != curr_autoc)
624 IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc);
628 hw->phy.autoneg_wait_to_complete = autoneg_wait_to_complete;
631 * Setup and restart the link based on the new values in
632 * ixgbe_hw This will write the AUTOC register based on the new
635 status = ixgbe_setup_mac_link_82598(hw);
643 * ixgbe_setup_copper_link_82598 - Setup copper link settings
644 * @hw: pointer to hardware structure
646 * Configures link settings based on values in the ixgbe_hw struct.
647 * Restarts the link. Performs autonegotiation if needed. Restart
648 * phy and wait for autonegotiate to finish. Then synchronize the
651 static s32 ixgbe_setup_copper_link_82598(struct ixgbe_hw *hw)
655 /* Restart autonegotiation on PHY */
656 status = hw->phy.ops.setup_link(hw);
659 ixgbe_setup_mac_link_82598(hw);
665 * ixgbe_setup_copper_link_speed_82598 - Set the PHY autoneg advertised field
666 * @hw: pointer to hardware structure
667 * @speed: new link speed
668 * @autoneg: true if autonegotiation enabled
669 * @autoneg_wait_to_complete: true if waiting is needed to complete
671 * Sets the link speed in the AUTOC register in the MAC and restarts link.
673 static s32 ixgbe_setup_copper_link_speed_82598(struct ixgbe_hw *hw,
674 ixgbe_link_speed speed,
676 bool autoneg_wait_to_complete)
680 /* Setup the PHY according to input speed */
681 status = hw->phy.ops.setup_link_speed(hw, speed, autoneg,
682 autoneg_wait_to_complete);
685 ixgbe_setup_mac_link_82598(hw);
691 * ixgbe_reset_hw_82598 - Performs hardware reset
692 * @hw: pointer to hardware structure
694 * Resets the hardware by resetting the transmit and receive units, masks and
695 * clears all interrupts, performing a PHY reset, and performing a link (MAC)
698 static s32 ixgbe_reset_hw_82598(struct ixgbe_hw *hw)
708 /* Call adapter stop to disable tx/rx and clear interrupts */
709 hw->mac.ops.stop_adapter(hw);
712 * Power up the Atlas Tx lanes if they are currently powered down.
713 * Atlas Tx lanes are powered down for MAC loopback tests, but
714 * they are not automatically restored on reset.
716 hw->mac.ops.read_analog_reg8(hw, IXGBE_ATLAS_PDN_LPBK, &analog_val);
717 if (analog_val & IXGBE_ATLAS_PDN_TX_REG_EN) {
718 /* Enable Tx Atlas so packets can be transmitted again */
719 hw->mac.ops.read_analog_reg8(hw, IXGBE_ATLAS_PDN_LPBK,
721 analog_val &= ~IXGBE_ATLAS_PDN_TX_REG_EN;
722 hw->mac.ops.write_analog_reg8(hw, IXGBE_ATLAS_PDN_LPBK,
725 hw->mac.ops.read_analog_reg8(hw, IXGBE_ATLAS_PDN_10G,
727 analog_val &= ~IXGBE_ATLAS_PDN_TX_10G_QL_ALL;
728 hw->mac.ops.write_analog_reg8(hw, IXGBE_ATLAS_PDN_10G,
731 hw->mac.ops.read_analog_reg8(hw, IXGBE_ATLAS_PDN_1G,
733 analog_val &= ~IXGBE_ATLAS_PDN_TX_1G_QL_ALL;
734 hw->mac.ops.write_analog_reg8(hw, IXGBE_ATLAS_PDN_1G,
737 hw->mac.ops.read_analog_reg8(hw, IXGBE_ATLAS_PDN_AN,
739 analog_val &= ~IXGBE_ATLAS_PDN_TX_AN_QL_ALL;
740 hw->mac.ops.write_analog_reg8(hw, IXGBE_ATLAS_PDN_AN,
745 if (hw->phy.reset_disable == false) {
746 /* PHY ops must be identified and initialized prior to reset */
748 /* Init PHY and function pointers, perform SFP setup */
749 phy_status = hw->phy.ops.init(hw);
750 if (phy_status == IXGBE_ERR_SFP_NOT_SUPPORTED)
752 else if (phy_status == IXGBE_ERR_SFP_NOT_PRESENT)
756 hw->phy.ops.reset(hw);
761 * Prevent the PCI-E bus from from hanging by disabling PCI-E master
762 * access and verify no pending requests before reset
764 status = ixgbe_disable_pcie_master(hw);
766 status = IXGBE_ERR_MASTER_REQUESTS_PENDING;
767 hw_dbg(hw, "PCI-E Master disable polling has failed.\n");
771 * Issue global reset to the MAC. This needs to be a SW reset.
772 * If link reset is used, it might reset the MAC when mng is using it
774 ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL);
775 IXGBE_WRITE_REG(hw, IXGBE_CTRL, (ctrl | IXGBE_CTRL_RST));
776 IXGBE_WRITE_FLUSH(hw);
778 /* Poll for reset bit to self-clear indicating reset is complete */
779 for (i = 0; i < 10; i++) {
781 ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL);
782 if (!(ctrl & IXGBE_CTRL_RST))
785 if (ctrl & IXGBE_CTRL_RST) {
786 status = IXGBE_ERR_RESET_FAILED;
787 hw_dbg(hw, "Reset polling failed to complete.\n");
792 gheccr = IXGBE_READ_REG(hw, IXGBE_GHECCR);
793 gheccr &= ~((1 << 21) | (1 << 18) | (1 << 9) | (1 << 6));
794 IXGBE_WRITE_REG(hw, IXGBE_GHECCR, gheccr);
797 * Store the original AUTOC value if it has not been
798 * stored off yet. Otherwise restore the stored original
799 * AUTOC value since the reset operation sets back to deaults.
801 autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC);
802 if (hw->mac.orig_link_settings_stored == false) {
803 hw->mac.orig_autoc = autoc;
804 hw->mac.orig_link_settings_stored = true;
805 } else if (autoc != hw->mac.orig_autoc) {
806 IXGBE_WRITE_REG(hw, IXGBE_AUTOC, hw->mac.orig_autoc);
810 * Store MAC address from RAR0, clear receive address registers, and
811 * clear the multicast table
813 hw->mac.ops.init_rx_addrs(hw);
815 /* Store the permanent mac address */
816 hw->mac.ops.get_mac_addr(hw, hw->mac.perm_addr);
826 * ixgbe_set_vmdq_82598 - Associate a VMDq set index with a rx address
827 * @hw: pointer to hardware struct
828 * @rar: receive address register index to associate with a VMDq index
829 * @vmdq: VMDq set index
831 static s32 ixgbe_set_vmdq_82598(struct ixgbe_hw *hw, u32 rar, u32 vmdq)
835 rar_high = IXGBE_READ_REG(hw, IXGBE_RAH(rar));
836 rar_high &= ~IXGBE_RAH_VIND_MASK;
837 rar_high |= ((vmdq << IXGBE_RAH_VIND_SHIFT) & IXGBE_RAH_VIND_MASK);
838 IXGBE_WRITE_REG(hw, IXGBE_RAH(rar), rar_high);
843 * ixgbe_clear_vmdq_82598 - Disassociate a VMDq set index from an rx address
844 * @hw: pointer to hardware struct
845 * @rar: receive address register index to associate with a VMDq index
846 * @vmdq: VMDq clear index (not used in 82598, but elsewhere)
848 static s32 ixgbe_clear_vmdq_82598(struct ixgbe_hw *hw, u32 rar, u32 vmdq)
851 u32 rar_entries = hw->mac.num_rar_entries;
853 if (rar < rar_entries) {
854 rar_high = IXGBE_READ_REG(hw, IXGBE_RAH(rar));
855 if (rar_high & IXGBE_RAH_VIND_MASK) {
856 rar_high &= ~IXGBE_RAH_VIND_MASK;
857 IXGBE_WRITE_REG(hw, IXGBE_RAH(rar), rar_high);
860 hw_dbg(hw, "RAR index %d is out of range.\n", rar);
867 * ixgbe_set_vfta_82598 - Set VLAN filter table
868 * @hw: pointer to hardware structure
869 * @vlan: VLAN id to write to VLAN filter
870 * @vind: VMDq output index that maps queue to VLAN id in VFTA
871 * @vlan_on: boolean flag to turn on/off VLAN in VFTA
873 * Turn on/off specified VLAN in the VLAN filter table.
875 static s32 ixgbe_set_vfta_82598(struct ixgbe_hw *hw, u32 vlan, u32 vind,
884 return IXGBE_ERR_PARAM;
886 /* Determine 32-bit word position in array */
887 regindex = (vlan >> 5) & 0x7F; /* upper seven bits */
889 /* Determine the location of the (VMD) queue index */
890 vftabyte = ((vlan >> 3) & 0x03); /* bits (4:3) indicating byte array */
891 bitindex = (vlan & 0x7) << 2; /* lower 3 bits indicate nibble */
893 /* Set the nibble for VMD queue index */
894 bits = IXGBE_READ_REG(hw, IXGBE_VFTAVIND(vftabyte, regindex));
895 bits &= (~(0x0F << bitindex));
896 bits |= (vind << bitindex);
897 IXGBE_WRITE_REG(hw, IXGBE_VFTAVIND(vftabyte, regindex), bits);
899 /* Determine the location of the bit for this VLAN id */
900 bitindex = vlan & 0x1F; /* lower five bits */
902 bits = IXGBE_READ_REG(hw, IXGBE_VFTA(regindex));
904 /* Turn on this VLAN id */
905 bits |= (1 << bitindex);
907 /* Turn off this VLAN id */
908 bits &= ~(1 << bitindex);
909 IXGBE_WRITE_REG(hw, IXGBE_VFTA(regindex), bits);
915 * ixgbe_clear_vfta_82598 - Clear VLAN filter table
916 * @hw: pointer to hardware structure
918 * Clears the VLAN filer table, and the VMDq index associated with the filter
920 static s32 ixgbe_clear_vfta_82598(struct ixgbe_hw *hw)
925 for (offset = 0; offset < hw->mac.vft_size; offset++)
926 IXGBE_WRITE_REG(hw, IXGBE_VFTA(offset), 0);
928 for (vlanbyte = 0; vlanbyte < 4; vlanbyte++)
929 for (offset = 0; offset < hw->mac.vft_size; offset++)
930 IXGBE_WRITE_REG(hw, IXGBE_VFTAVIND(vlanbyte, offset),
937 * ixgbe_read_analog_reg8_82598 - Reads 8 bit Atlas analog register
938 * @hw: pointer to hardware structure
939 * @reg: analog register to read
942 * Performs read operation to Atlas analog register specified.
944 static s32 ixgbe_read_analog_reg8_82598(struct ixgbe_hw *hw, u32 reg, u8 *val)
948 IXGBE_WRITE_REG(hw, IXGBE_ATLASCTL,
949 IXGBE_ATLASCTL_WRITE_CMD | (reg << 8));
950 IXGBE_WRITE_FLUSH(hw);
952 atlas_ctl = IXGBE_READ_REG(hw, IXGBE_ATLASCTL);
953 *val = (u8)atlas_ctl;
959 * ixgbe_write_analog_reg8_82598 - Writes 8 bit Atlas analog register
960 * @hw: pointer to hardware structure
961 * @reg: atlas register to write
962 * @val: value to write
964 * Performs write operation to Atlas analog register specified.
966 static s32 ixgbe_write_analog_reg8_82598(struct ixgbe_hw *hw, u32 reg, u8 val)
970 atlas_ctl = (reg << 8) | val;
971 IXGBE_WRITE_REG(hw, IXGBE_ATLASCTL, atlas_ctl);
972 IXGBE_WRITE_FLUSH(hw);
979 * ixgbe_read_i2c_eeprom_82598 - Read 8 bit EEPROM word of an SFP+ module
980 * over I2C interface through an intermediate phy.
981 * @hw: pointer to hardware structure
982 * @byte_offset: EEPROM byte offset to read
983 * @eeprom_data: value read
985 * Performs byte read operation to SFP module's EEPROM over I2C interface.
987 static s32 ixgbe_read_i2c_eeprom_82598(struct ixgbe_hw *hw, u8 byte_offset,
996 if (hw->phy.type == ixgbe_phy_nl) {
998 * phy SDA/SCL registers are at addresses 0xC30A to
999 * 0xC30D. These registers are used to talk to the SFP+
1000 * module's EEPROM through the SDA/SCL (I2C) interface.
1002 sfp_addr = (IXGBE_I2C_EEPROM_DEV_ADDR << 8) + byte_offset;
1003 sfp_addr = (sfp_addr | IXGBE_I2C_EEPROM_READ_MASK);
1004 hw->phy.ops.write_reg(hw,
1005 IXGBE_MDIO_PMA_PMD_SDA_SCL_ADDR,
1010 for (i = 0; i < 100; i++) {
1011 hw->phy.ops.read_reg(hw,
1012 IXGBE_MDIO_PMA_PMD_SDA_SCL_STAT,
1015 sfp_stat = sfp_stat & IXGBE_I2C_EEPROM_STATUS_MASK;
1016 if (sfp_stat != IXGBE_I2C_EEPROM_STATUS_IN_PROGRESS)
1021 if (sfp_stat != IXGBE_I2C_EEPROM_STATUS_PASS) {
1022 hw_dbg(hw, "EEPROM read did not pass.\n");
1023 status = IXGBE_ERR_SFP_NOT_PRESENT;
1028 hw->phy.ops.read_reg(hw, IXGBE_MDIO_PMA_PMD_SDA_SCL_DATA,
1029 MDIO_MMD_PMAPMD, &sfp_data);
1031 *eeprom_data = (u8)(sfp_data >> 8);
1033 status = IXGBE_ERR_PHY;
1042 * ixgbe_get_supported_physical_layer_82598 - Returns physical layer type
1043 * @hw: pointer to hardware structure
1045 * Determines physical layer capabilities of the current configuration.
1047 static u32 ixgbe_get_supported_physical_layer_82598(struct ixgbe_hw *hw)
1049 u32 physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN;
1050 u32 autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC);
1051 u32 pma_pmd_10g = autoc & IXGBE_AUTOC_10G_PMA_PMD_MASK;
1052 u32 pma_pmd_1g = autoc & IXGBE_AUTOC_1G_PMA_PMD_MASK;
1053 u16 ext_ability = 0;
1055 hw->phy.ops.identify(hw);
1057 /* Copper PHY must be checked before AUTOC LMS to determine correct
1058 * physical layer because 10GBase-T PHYs use LMS = KX4/KX */
1059 if (hw->phy.type == ixgbe_phy_tn ||
1060 hw->phy.type == ixgbe_phy_cu_unknown) {
1061 hw->phy.ops.read_reg(hw, MDIO_PMA_EXTABLE, MDIO_MMD_PMAPMD,
1063 if (ext_ability & MDIO_PMA_EXTABLE_10GBT)
1064 physical_layer |= IXGBE_PHYSICAL_LAYER_10GBASE_T;
1065 if (ext_ability & MDIO_PMA_EXTABLE_1000BT)
1066 physical_layer |= IXGBE_PHYSICAL_LAYER_1000BASE_T;
1067 if (ext_ability & MDIO_PMA_EXTABLE_100BTX)
1068 physical_layer |= IXGBE_PHYSICAL_LAYER_100BASE_TX;
1072 switch (autoc & IXGBE_AUTOC_LMS_MASK) {
1073 case IXGBE_AUTOC_LMS_1G_AN:
1074 case IXGBE_AUTOC_LMS_1G_LINK_NO_AN:
1075 if (pma_pmd_1g == IXGBE_AUTOC_1G_KX)
1076 physical_layer = IXGBE_PHYSICAL_LAYER_1000BASE_KX;
1078 physical_layer = IXGBE_PHYSICAL_LAYER_1000BASE_BX;
1080 case IXGBE_AUTOC_LMS_10G_LINK_NO_AN:
1081 if (pma_pmd_10g == IXGBE_AUTOC_10G_CX4)
1082 physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_CX4;
1083 else if (pma_pmd_10g == IXGBE_AUTOC_10G_KX4)
1084 physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_KX4;
1086 physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN;
1088 case IXGBE_AUTOC_LMS_KX4_AN:
1089 case IXGBE_AUTOC_LMS_KX4_AN_1G_AN:
1090 if (autoc & IXGBE_AUTOC_KX_SUPP)
1091 physical_layer |= IXGBE_PHYSICAL_LAYER_1000BASE_KX;
1092 if (autoc & IXGBE_AUTOC_KX4_SUPP)
1093 physical_layer |= IXGBE_PHYSICAL_LAYER_10GBASE_KX4;
1099 if (hw->phy.type == ixgbe_phy_nl) {
1100 hw->phy.ops.identify_sfp(hw);
1102 switch (hw->phy.sfp_type) {
1103 case ixgbe_sfp_type_da_cu:
1104 physical_layer = IXGBE_PHYSICAL_LAYER_SFP_PLUS_CU;
1106 case ixgbe_sfp_type_sr:
1107 physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_SR;
1109 case ixgbe_sfp_type_lr:
1110 physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_LR;
1113 physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN;
1118 switch (hw->device_id) {
1119 case IXGBE_DEV_ID_82598_DA_DUAL_PORT:
1120 physical_layer = IXGBE_PHYSICAL_LAYER_SFP_PLUS_CU;
1122 case IXGBE_DEV_ID_82598AF_DUAL_PORT:
1123 case IXGBE_DEV_ID_82598AF_SINGLE_PORT:
1124 case IXGBE_DEV_ID_82598_SR_DUAL_PORT_EM:
1125 physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_SR;
1127 case IXGBE_DEV_ID_82598EB_XF_LR:
1128 physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_LR;
1135 return physical_layer;
1138 static struct ixgbe_mac_operations mac_ops_82598 = {
1139 .init_hw = &ixgbe_init_hw_generic,
1140 .reset_hw = &ixgbe_reset_hw_82598,
1141 .start_hw = &ixgbe_start_hw_generic,
1142 .clear_hw_cntrs = &ixgbe_clear_hw_cntrs_generic,
1143 .get_media_type = &ixgbe_get_media_type_82598,
1144 .get_supported_physical_layer = &ixgbe_get_supported_physical_layer_82598,
1145 .enable_rx_dma = &ixgbe_enable_rx_dma_generic,
1146 .get_mac_addr = &ixgbe_get_mac_addr_generic,
1147 .stop_adapter = &ixgbe_stop_adapter_generic,
1148 .get_bus_info = &ixgbe_get_bus_info_generic,
1149 .set_lan_id = &ixgbe_set_lan_id_multi_port_pcie,
1150 .read_analog_reg8 = &ixgbe_read_analog_reg8_82598,
1151 .write_analog_reg8 = &ixgbe_write_analog_reg8_82598,
1152 .setup_link = &ixgbe_setup_mac_link_82598,
1153 .setup_link_speed = &ixgbe_setup_mac_link_speed_82598,
1154 .check_link = &ixgbe_check_mac_link_82598,
1155 .get_link_capabilities = &ixgbe_get_link_capabilities_82598,
1156 .led_on = &ixgbe_led_on_generic,
1157 .led_off = &ixgbe_led_off_generic,
1158 .blink_led_start = &ixgbe_blink_led_start_generic,
1159 .blink_led_stop = &ixgbe_blink_led_stop_generic,
1160 .set_rar = &ixgbe_set_rar_generic,
1161 .clear_rar = &ixgbe_clear_rar_generic,
1162 .set_vmdq = &ixgbe_set_vmdq_82598,
1163 .clear_vmdq = &ixgbe_clear_vmdq_82598,
1164 .init_rx_addrs = &ixgbe_init_rx_addrs_generic,
1165 .update_uc_addr_list = &ixgbe_update_uc_addr_list_generic,
1166 .update_mc_addr_list = &ixgbe_update_mc_addr_list_generic,
1167 .enable_mc = &ixgbe_enable_mc_generic,
1168 .disable_mc = &ixgbe_disable_mc_generic,
1169 .clear_vfta = &ixgbe_clear_vfta_82598,
1170 .set_vfta = &ixgbe_set_vfta_82598,
1171 .setup_fc = &ixgbe_setup_fc_82598,
1174 static struct ixgbe_eeprom_operations eeprom_ops_82598 = {
1175 .init_params = &ixgbe_init_eeprom_params_generic,
1176 .read = &ixgbe_read_eeprom_generic,
1177 .validate_checksum = &ixgbe_validate_eeprom_checksum_generic,
1178 .update_checksum = &ixgbe_update_eeprom_checksum_generic,
1181 static struct ixgbe_phy_operations phy_ops_82598 = {
1182 .identify = &ixgbe_identify_phy_generic,
1183 .identify_sfp = &ixgbe_identify_sfp_module_generic,
1184 .init = &ixgbe_init_phy_ops_82598,
1185 .reset = &ixgbe_reset_phy_generic,
1186 .read_reg = &ixgbe_read_phy_reg_generic,
1187 .write_reg = &ixgbe_write_phy_reg_generic,
1188 .setup_link = &ixgbe_setup_phy_link_generic,
1189 .setup_link_speed = &ixgbe_setup_phy_link_speed_generic,
1190 .read_i2c_eeprom = &ixgbe_read_i2c_eeprom_82598,
1193 struct ixgbe_info ixgbe_82598_info = {
1194 .mac = ixgbe_mac_82598EB,
1195 .get_invariants = &ixgbe_get_invariants_82598,
1196 .mac_ops = &mac_ops_82598,
1197 .eeprom_ops = &eeprom_ops_82598,
1198 .phy_ops = &phy_ops_82598,