2 # PHY Layer Configuration
6 tristate "PHY Device support and infrastructure"
10 Ethernet controllers are usually attached to PHY
11 devices. This option provides infrastructure for
16 comment "MII PHY device drivers"
19 tristate "Drivers for the AMD PHYs"
21 Currently supports the am79c874
24 tristate "Drivers for Marvell PHYs"
26 Currently has a driver for the 88E1011S
29 tristate "Drivers for Davicom PHYs"
31 Currently supports dm9161e and dm9131
34 tristate "Drivers for Quality Semiconductor PHYs"
36 Currently supports the qs6612
39 tristate "Drivers for the Intel LXT PHYs"
41 Currently supports the lxt970, lxt971
44 tristate "Drivers for the Cicada PHYs"
46 Currently supports the cis8204
49 tristate "Drivers for the Vitesse PHYs"
51 Currently supports the vsc8244
54 tristate "Drivers for SMSC PHYs"
56 Currently supports the LAN83C185, LAN8187 and LAN8700 PHYs
59 tristate "Drivers for Broadcom PHYs"
61 Currently supports the BCM5411, BCM5421, BCM5461, BCM5464, BCM5481
65 tristate "Drivers for Broadcom 63xx SOCs internal PHY"
68 Currently supports the 6348 and 6358 PHYs.
71 tristate "Driver for Broadcom BCM8706 and BCM8727 PHYs"
73 Currently supports the BCM8706 and BCM8727 10G Ethernet PHYs.
76 tristate "Drivers for ICPlus PHYs"
78 Currently supports the IP175C and IP1001 PHYs.
81 tristate "Drivers for Realtek PHYs"
83 Supports the Realtek 821x PHY.
86 tristate "Drivers for National Semiconductor PHYs"
88 Currently supports the DP83865 PHY.
91 tristate "Driver for STMicroelectronics STe10Xp PHYs"
93 This is the driver for the STe100p and STe101p PHYs.
95 config LSI_ET1011C_PHY
96 tristate "Driver for LSI ET1011C PHY"
98 Supports the LSI ET1011C PHY.
101 tristate "Driver for Micrel PHYs"
103 Supports the KSZ9021, VSC8201, KS8001 PHYs.
106 bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs"
109 Adds the platform "fixed" MDIO Bus to cover the boards that use
110 PHYs that are not connected to the real MDIO bus.
112 Currently tested with mpc866ads and mpc8349e-mitx.
115 tristate "Support for bitbanged MDIO buses"
117 This module implements the MDIO bus protocol in software,
118 for use by low level drivers that export the ability to
119 drive the relevant pins.
124 tristate "Support for GPIO lib-based bitbanged MDIO buses"
125 depends on MDIO_BITBANG && GENERIC_GPIO
127 Supports GPIO lib-based MDIO busses.
129 To compile this driver as a module, choose M here: the module
130 will be called mdio-gpio.
133 tristate "Support for MDIO buses on Octeon SOCs"
134 depends on CPU_CAVIUM_OCTEON
138 This module provides a driver for the Octeon MDIO busses.
139 It is required by the Octeon Ethernet device drivers.
147 This module provides a driver framework for MDIO bus
148 multiplexers which connect one of several child MDIO busses
149 to a parent bus. Switching between child busses is done by
150 device specific drivers.
152 config MDIO_BUS_MUX_GPIO
153 tristate "Support for GPIO controlled MDIO bus multiplexers"
154 depends on OF_GPIO && OF_MDIO
157 This module provides a driver for MDIO bus multiplexers that
158 are controlled via GPIO lines. The multiplexer connects one of
159 several child MDIO busses to a parent bus. Child bus
160 selection is under the control of GPIO lines.
162 config MDIO_BUS_MUX_MMIOREG
163 tristate "Support for MMIO device-controlled MDIO bus multiplexers"
167 This module provides a driver for MDIO bus multiplexers that
168 are controlled via a simple memory-mapped device, like an FPGA.
169 The multiplexer connects one of several child MDIO busses to a
170 parent bus. Child bus selection is under the control of one of
171 the FPGA's registers.
173 Currently, only 8-bit registers are supported.
177 config MICREL_KS8995MA
178 tristate "Micrel KS8995MA 5-ports 10/100 managed Ethernet switch"