1 /************************************************************************
2 * s2io.c: A Linux PCI-X Ethernet driver for Neterion 10GbE Server NIC
3 * Copyright(c) 2002-2005 Neterion Inc.
5 * This software may be used and distributed according to the terms of
6 * the GNU General Public License (GPL), incorporated herein by reference.
7 * Drivers based on or derived from this code fall under the GPL and must
8 * retain the authorship, copyright and license notice. This file is not
9 * a complete program and may only be used when the entire operating
10 * system is licensed under the GPL.
11 * See the file COPYING in this distribution for more information.
14 * Jeff Garzik : For pointing out the improper error condition
15 * check in the s2io_xmit routine and also some
16 * issues in the Tx watch dog function. Also for
17 * patiently answering all those innumerable
18 * questions regaring the 2.6 porting issues.
19 * Stephen Hemminger : Providing proper 2.6 porting mechanism for some
20 * macros available only in 2.6 Kernel.
21 * Francois Romieu : For pointing out all code part that were
22 * deprecated and also styling related comments.
23 * Grant Grundler : For helping me get rid of some Architecture
25 * Christopher Hellwig : Some more 2.6 specific issues in the driver.
27 * The module loadable parameters that are supported by the driver and a brief
28 * explaination of all the variables.
30 * rx_ring_num : This can be used to program the number of receive rings used
32 * rx_ring_sz: This defines the number of receive blocks each ring can have.
33 * This is also an array of size 8.
34 * rx_ring_mode: This defines the operation mode of all 8 rings. The valid
35 * values are 1, 2 and 3.
36 * tx_fifo_num: This defines the number of Tx FIFOs thats used int the driver.
37 * tx_fifo_len: This too is an array of 8. Each element defines the number of
38 * Tx descriptors that can be associated with each corresponding FIFO.
39 * intr_type: This defines the type of interrupt. The values can be 0(INTA),
40 * 1(MSI), 2(MSI_X). Default value is '0(INTA)'
41 * lro: Specifies whether to enable Large Receive Offload (LRO) or not.
42 * Possible values '1' for enable '0' for disable. Default is '0'
43 * lro_max_pkts: This parameter defines maximum number of packets can be
44 * aggregated as a single large packet
45 ************************************************************************/
47 #include <linux/module.h>
48 #include <linux/types.h>
49 #include <linux/errno.h>
50 #include <linux/ioport.h>
51 #include <linux/pci.h>
52 #include <linux/dma-mapping.h>
53 #include <linux/kernel.h>
54 #include <linux/netdevice.h>
55 #include <linux/etherdevice.h>
56 #include <linux/skbuff.h>
57 #include <linux/init.h>
58 #include <linux/delay.h>
59 #include <linux/stddef.h>
60 #include <linux/ioctl.h>
61 #include <linux/timex.h>
62 #include <linux/ethtool.h>
63 #include <linux/workqueue.h>
64 #include <linux/if_vlan.h>
66 #include <linux/tcp.h>
69 #include <asm/system.h>
70 #include <asm/uaccess.h>
72 #include <asm/div64.h>
77 #include "s2io-regs.h"
79 #define DRV_VERSION "2.0.16.1"
81 /* S2io Driver name & version. */
82 static char s2io_driver_name[] = "Neterion";
83 static char s2io_driver_version[] = DRV_VERSION;
85 static int rxd_size[4] = {32,48,48,64};
86 static int rxd_count[4] = {127,85,85,63};
88 static inline int RXD_IS_UP2DT(struct RxD_t *rxdp)
92 ret = ((!(rxdp->Control_1 & RXD_OWN_XENA)) &&
93 (GET_RXD_MARKER(rxdp->Control_2) != THE_RXD_MARK));
99 * Cards with following subsystem_id have a link state indication
100 * problem, 600B, 600C, 600D, 640B, 640C and 640D.
101 * macro below identifies these cards given the subsystem_id.
103 #define CARDS_WITH_FAULTY_LINK_INDICATORS(dev_type, subid) \
104 (dev_type == XFRAME_I_DEVICE) ? \
105 ((((subid >= 0x600B) && (subid <= 0x600D)) || \
106 ((subid >= 0x640B) && (subid <= 0x640D))) ? 1 : 0) : 0
108 #define LINK_IS_UP(val64) (!(val64 & (ADAPTER_STATUS_RMAC_REMOTE_FAULT | \
109 ADAPTER_STATUS_RMAC_LOCAL_FAULT)))
110 #define TASKLET_IN_USE test_and_set_bit(0, (&sp->tasklet_status))
113 static inline int rx_buffer_level(struct s2io_nic * sp, int rxb_size, int ring)
115 struct mac_info *mac_control;
117 mac_control = &sp->mac_control;
118 if (rxb_size <= rxd_count[sp->rxd_mode])
120 else if ((mac_control->rings[ring].pkt_cnt - rxb_size) > 16)
125 /* Ethtool related variables and Macros. */
126 static char s2io_gstrings[][ETH_GSTRING_LEN] = {
127 "Register test\t(offline)",
128 "Eeprom test\t(offline)",
129 "Link test\t(online)",
130 "RLDRAM test\t(offline)",
131 "BIST Test\t(offline)"
134 static char ethtool_stats_keys[][ETH_GSTRING_LEN] = {
136 {"tmac_data_octets"},
140 {"tmac_pause_ctrl_frms"},
144 {"tmac_any_err_frms"},
145 {"tmac_ttl_less_fb_octets"},
146 {"tmac_vld_ip_octets"},
154 {"rmac_data_octets"},
155 {"rmac_fcs_err_frms"},
157 {"rmac_vld_mcst_frms"},
158 {"rmac_vld_bcst_frms"},
159 {"rmac_in_rng_len_err_frms"},
160 {"rmac_out_rng_len_err_frms"},
162 {"rmac_pause_ctrl_frms"},
163 {"rmac_unsup_ctrl_frms"},
165 {"rmac_accepted_ucst_frms"},
166 {"rmac_accepted_nucst_frms"},
167 {"rmac_discarded_frms"},
168 {"rmac_drop_events"},
169 {"rmac_ttl_less_fb_octets"},
171 {"rmac_usized_frms"},
172 {"rmac_osized_frms"},
174 {"rmac_jabber_frms"},
175 {"rmac_ttl_64_frms"},
176 {"rmac_ttl_65_127_frms"},
177 {"rmac_ttl_128_255_frms"},
178 {"rmac_ttl_256_511_frms"},
179 {"rmac_ttl_512_1023_frms"},
180 {"rmac_ttl_1024_1518_frms"},
188 {"rmac_err_drp_udp"},
189 {"rmac_xgmii_err_sym"},
207 {"rmac_xgmii_data_err_cnt"},
208 {"rmac_xgmii_ctrl_err_cnt"},
209 {"rmac_accepted_ip"},
213 {"new_rd_req_rtry_cnt"},
215 {"wr_rtry_rd_ack_cnt"},
218 {"new_wr_req_rtry_cnt"},
221 {"rd_rtry_wr_ack_cnt"},
229 {"rmac_ttl_1519_4095_frms"},
230 {"rmac_ttl_4096_8191_frms"},
231 {"rmac_ttl_8192_max_frms"},
232 {"rmac_ttl_gt_max_frms"},
233 {"rmac_osized_alt_frms"},
234 {"rmac_jabber_alt_frms"},
235 {"rmac_gt_max_alt_frms"},
237 {"rmac_len_discard"},
238 {"rmac_fcs_discard"},
241 {"rmac_red_discard"},
242 {"rmac_rts_discard"},
243 {"rmac_ingm_full_discard"},
245 {"\n DRIVER STATISTICS"},
246 {"single_bit_ecc_errs"},
247 {"double_bit_ecc_errs"},
253 ("alarm_transceiver_temp_high"),
254 ("alarm_transceiver_temp_low"),
255 ("alarm_laser_bias_current_high"),
256 ("alarm_laser_bias_current_low"),
257 ("alarm_laser_output_power_high"),
258 ("alarm_laser_output_power_low"),
259 ("warn_transceiver_temp_high"),
260 ("warn_transceiver_temp_low"),
261 ("warn_laser_bias_current_high"),
262 ("warn_laser_bias_current_low"),
263 ("warn_laser_output_power_high"),
264 ("warn_laser_output_power_low"),
265 ("lro_aggregated_pkts"),
266 ("lro_flush_both_count"),
267 ("lro_out_of_sequence_pkts"),
268 ("lro_flush_due_to_max_pkts"),
269 ("lro_avg_aggr_pkts"),
272 #define S2IO_STAT_LEN sizeof(ethtool_stats_keys)/ ETH_GSTRING_LEN
273 #define S2IO_STAT_STRINGS_LEN S2IO_STAT_LEN * ETH_GSTRING_LEN
275 #define S2IO_TEST_LEN sizeof(s2io_gstrings) / ETH_GSTRING_LEN
276 #define S2IO_STRINGS_LEN S2IO_TEST_LEN * ETH_GSTRING_LEN
278 #define S2IO_TIMER_CONF(timer, handle, arg, exp) \
279 init_timer(&timer); \
280 timer.function = handle; \
281 timer.data = (unsigned long) arg; \
282 mod_timer(&timer, (jiffies + exp)) \
285 static void s2io_vlan_rx_register(struct net_device *dev,
286 struct vlan_group *grp)
288 struct s2io_nic *nic = dev->priv;
291 spin_lock_irqsave(&nic->tx_lock, flags);
293 spin_unlock_irqrestore(&nic->tx_lock, flags);
296 /* Unregister the vlan */
297 static void s2io_vlan_rx_kill_vid(struct net_device *dev, unsigned long vid)
299 struct s2io_nic *nic = dev->priv;
302 spin_lock_irqsave(&nic->tx_lock, flags);
304 nic->vlgrp->vlan_devices[vid] = NULL;
305 spin_unlock_irqrestore(&nic->tx_lock, flags);
309 * Constants to be programmed into the Xena's registers, to configure
314 static const u64 herc_act_dtx_cfg[] = {
316 0x8000051536750000ULL, 0x80000515367500E0ULL,
318 0x8000051536750004ULL, 0x80000515367500E4ULL,
320 0x80010515003F0000ULL, 0x80010515003F00E0ULL,
322 0x80010515003F0004ULL, 0x80010515003F00E4ULL,
324 0x801205150D440000ULL, 0x801205150D4400E0ULL,
326 0x801205150D440004ULL, 0x801205150D4400E4ULL,
328 0x80020515F2100000ULL, 0x80020515F21000E0ULL,
330 0x80020515F2100004ULL, 0x80020515F21000E4ULL,
335 static const u64 xena_dtx_cfg[] = {
337 0x8000051500000000ULL, 0x80000515000000E0ULL,
339 0x80000515D9350004ULL, 0x80000515D93500E4ULL,
341 0x8001051500000000ULL, 0x80010515000000E0ULL,
343 0x80010515001E0004ULL, 0x80010515001E00E4ULL,
345 0x8002051500000000ULL, 0x80020515000000E0ULL,
347 0x80020515F2100004ULL, 0x80020515F21000E4ULL,
352 * Constants for Fixing the MacAddress problem seen mostly on
355 static const u64 fix_mac[] = {
356 0x0060000000000000ULL, 0x0060600000000000ULL,
357 0x0040600000000000ULL, 0x0000600000000000ULL,
358 0x0020600000000000ULL, 0x0060600000000000ULL,
359 0x0020600000000000ULL, 0x0060600000000000ULL,
360 0x0020600000000000ULL, 0x0060600000000000ULL,
361 0x0020600000000000ULL, 0x0060600000000000ULL,
362 0x0020600000000000ULL, 0x0060600000000000ULL,
363 0x0020600000000000ULL, 0x0060600000000000ULL,
364 0x0020600000000000ULL, 0x0060600000000000ULL,
365 0x0020600000000000ULL, 0x0060600000000000ULL,
366 0x0020600000000000ULL, 0x0060600000000000ULL,
367 0x0020600000000000ULL, 0x0060600000000000ULL,
368 0x0020600000000000ULL, 0x0000600000000000ULL,
369 0x0040600000000000ULL, 0x0060600000000000ULL,
373 MODULE_AUTHOR("Raghavendra Koushik <raghavendra.koushik@neterion.com>");
374 MODULE_LICENSE("GPL");
375 MODULE_VERSION(DRV_VERSION);
378 /* Module Loadable parameters. */
379 S2IO_PARM_INT(tx_fifo_num, 1);
380 S2IO_PARM_INT(rx_ring_num, 1);
383 S2IO_PARM_INT(rx_ring_mode, 1);
384 S2IO_PARM_INT(use_continuous_tx_intrs, 1);
385 S2IO_PARM_INT(rmac_pause_time, 0x100);
386 S2IO_PARM_INT(mc_pause_threshold_q0q3, 187);
387 S2IO_PARM_INT(mc_pause_threshold_q4q7, 187);
388 S2IO_PARM_INT(shared_splits, 0);
389 S2IO_PARM_INT(tmac_util_period, 5);
390 S2IO_PARM_INT(rmac_util_period, 5);
391 S2IO_PARM_INT(bimodal, 0);
392 S2IO_PARM_INT(l3l4hdr_size, 128);
393 /* Frequency of Rx desc syncs expressed as power of 2 */
394 S2IO_PARM_INT(rxsync_frequency, 3);
395 /* Interrupt type. Values can be 0(INTA), 1(MSI), 2(MSI_X) */
396 S2IO_PARM_INT(intr_type, 0);
397 /* Large receive offload feature */
398 S2IO_PARM_INT(lro, 0);
399 /* Max pkts to be aggregated by LRO at one time. If not specified,
400 * aggregation happens until we hit max IP pkt size(64K)
402 S2IO_PARM_INT(lro_max_pkts, 0xFFFF);
403 S2IO_PARM_INT(indicate_max_pkts, 0);
405 S2IO_PARM_INT(napi, 1);
406 S2IO_PARM_INT(ufo, 0);
408 static unsigned int tx_fifo_len[MAX_TX_FIFOS] =
409 {DEFAULT_FIFO_0_LEN, [1 ...(MAX_TX_FIFOS - 1)] = DEFAULT_FIFO_1_7_LEN};
410 static unsigned int rx_ring_sz[MAX_RX_RINGS] =
411 {[0 ...(MAX_RX_RINGS - 1)] = SMALL_BLK_CNT};
412 static unsigned int rts_frm_len[MAX_RX_RINGS] =
413 {[0 ...(MAX_RX_RINGS - 1)] = 0 };
415 module_param_array(tx_fifo_len, uint, NULL, 0);
416 module_param_array(rx_ring_sz, uint, NULL, 0);
417 module_param_array(rts_frm_len, uint, NULL, 0);
421 * This table lists all the devices that this driver supports.
423 static struct pci_device_id s2io_tbl[] __devinitdata = {
424 {PCI_VENDOR_ID_S2IO, PCI_DEVICE_ID_S2IO_WIN,
425 PCI_ANY_ID, PCI_ANY_ID},
426 {PCI_VENDOR_ID_S2IO, PCI_DEVICE_ID_S2IO_UNI,
427 PCI_ANY_ID, PCI_ANY_ID},
428 {PCI_VENDOR_ID_S2IO, PCI_DEVICE_ID_HERC_WIN,
429 PCI_ANY_ID, PCI_ANY_ID},
430 {PCI_VENDOR_ID_S2IO, PCI_DEVICE_ID_HERC_UNI,
431 PCI_ANY_ID, PCI_ANY_ID},
435 MODULE_DEVICE_TABLE(pci, s2io_tbl);
437 static struct pci_driver s2io_driver = {
439 .id_table = s2io_tbl,
440 .probe = s2io_init_nic,
441 .remove = __devexit_p(s2io_rem_nic),
444 /* A simplifier macro used both by init and free shared_mem Fns(). */
445 #define TXD_MEM_PAGE_CNT(len, per_each) ((len+per_each - 1) / per_each)
448 * init_shared_mem - Allocation and Initialization of Memory
449 * @nic: Device private variable.
450 * Description: The function allocates all the memory areas shared
451 * between the NIC and the driver. This includes Tx descriptors,
452 * Rx descriptors and the statistics block.
455 static int init_shared_mem(struct s2io_nic *nic)
458 void *tmp_v_addr, *tmp_v_addr_next;
459 dma_addr_t tmp_p_addr, tmp_p_addr_next;
460 struct RxD_block *pre_rxd_blk = NULL;
462 int lst_size, lst_per_page;
463 struct net_device *dev = nic->dev;
467 struct mac_info *mac_control;
468 struct config_param *config;
470 mac_control = &nic->mac_control;
471 config = &nic->config;
474 /* Allocation and initialization of TXDLs in FIOFs */
476 for (i = 0; i < config->tx_fifo_num; i++) {
477 size += config->tx_cfg[i].fifo_len;
479 if (size > MAX_AVAILABLE_TXDS) {
480 DBG_PRINT(ERR_DBG, "s2io: Requested TxDs too high, ");
481 DBG_PRINT(ERR_DBG, "Requested: %d, max supported: 8192\n", size);
485 lst_size = (sizeof(struct TxD) * config->max_txds);
486 lst_per_page = PAGE_SIZE / lst_size;
488 for (i = 0; i < config->tx_fifo_num; i++) {
489 int fifo_len = config->tx_cfg[i].fifo_len;
490 int list_holder_size = fifo_len * sizeof(struct list_info_hold);
491 mac_control->fifos[i].list_info = kmalloc(list_holder_size,
493 if (!mac_control->fifos[i].list_info) {
495 "Malloc failed for list_info\n");
498 memset(mac_control->fifos[i].list_info, 0, list_holder_size);
500 for (i = 0; i < config->tx_fifo_num; i++) {
501 int page_num = TXD_MEM_PAGE_CNT(config->tx_cfg[i].fifo_len,
503 mac_control->fifos[i].tx_curr_put_info.offset = 0;
504 mac_control->fifos[i].tx_curr_put_info.fifo_len =
505 config->tx_cfg[i].fifo_len - 1;
506 mac_control->fifos[i].tx_curr_get_info.offset = 0;
507 mac_control->fifos[i].tx_curr_get_info.fifo_len =
508 config->tx_cfg[i].fifo_len - 1;
509 mac_control->fifos[i].fifo_no = i;
510 mac_control->fifos[i].nic = nic;
511 mac_control->fifos[i].max_txds = MAX_SKB_FRAGS + 2;
513 for (j = 0; j < page_num; j++) {
517 tmp_v = pci_alloc_consistent(nic->pdev,
521 "pci_alloc_consistent ");
522 DBG_PRINT(ERR_DBG, "failed for TxDL\n");
525 /* If we got a zero DMA address(can happen on
526 * certain platforms like PPC), reallocate.
527 * Store virtual address of page we don't want,
531 mac_control->zerodma_virt_addr = tmp_v;
533 "%s: Zero DMA address for TxDL. ", dev->name);
535 "Virtual address %p\n", tmp_v);
536 tmp_v = pci_alloc_consistent(nic->pdev,
540 "pci_alloc_consistent ");
541 DBG_PRINT(ERR_DBG, "failed for TxDL\n");
545 while (k < lst_per_page) {
546 int l = (j * lst_per_page) + k;
547 if (l == config->tx_cfg[i].fifo_len)
549 mac_control->fifos[i].list_info[l].list_virt_addr =
550 tmp_v + (k * lst_size);
551 mac_control->fifos[i].list_info[l].list_phy_addr =
552 tmp_p + (k * lst_size);
558 nic->ufo_in_band_v = kcalloc(size, sizeof(u64), GFP_KERNEL);
559 if (!nic->ufo_in_band_v)
562 /* Allocation and initialization of RXDs in Rings */
564 for (i = 0; i < config->rx_ring_num; i++) {
565 if (config->rx_cfg[i].num_rxd %
566 (rxd_count[nic->rxd_mode] + 1)) {
567 DBG_PRINT(ERR_DBG, "%s: RxD count of ", dev->name);
568 DBG_PRINT(ERR_DBG, "Ring%d is not a multiple of ",
570 DBG_PRINT(ERR_DBG, "RxDs per Block");
573 size += config->rx_cfg[i].num_rxd;
574 mac_control->rings[i].block_count =
575 config->rx_cfg[i].num_rxd /
576 (rxd_count[nic->rxd_mode] + 1 );
577 mac_control->rings[i].pkt_cnt = config->rx_cfg[i].num_rxd -
578 mac_control->rings[i].block_count;
580 if (nic->rxd_mode == RXD_MODE_1)
581 size = (size * (sizeof(struct RxD1)));
583 size = (size * (sizeof(struct RxD3)));
585 for (i = 0; i < config->rx_ring_num; i++) {
586 mac_control->rings[i].rx_curr_get_info.block_index = 0;
587 mac_control->rings[i].rx_curr_get_info.offset = 0;
588 mac_control->rings[i].rx_curr_get_info.ring_len =
589 config->rx_cfg[i].num_rxd - 1;
590 mac_control->rings[i].rx_curr_put_info.block_index = 0;
591 mac_control->rings[i].rx_curr_put_info.offset = 0;
592 mac_control->rings[i].rx_curr_put_info.ring_len =
593 config->rx_cfg[i].num_rxd - 1;
594 mac_control->rings[i].nic = nic;
595 mac_control->rings[i].ring_no = i;
597 blk_cnt = config->rx_cfg[i].num_rxd /
598 (rxd_count[nic->rxd_mode] + 1);
599 /* Allocating all the Rx blocks */
600 for (j = 0; j < blk_cnt; j++) {
601 struct rx_block_info *rx_blocks;
604 rx_blocks = &mac_control->rings[i].rx_blocks[j];
605 size = SIZE_OF_BLOCK; //size is always page size
606 tmp_v_addr = pci_alloc_consistent(nic->pdev, size,
608 if (tmp_v_addr == NULL) {
610 * In case of failure, free_shared_mem()
611 * is called, which should free any
612 * memory that was alloced till the
615 rx_blocks->block_virt_addr = tmp_v_addr;
618 memset(tmp_v_addr, 0, size);
619 rx_blocks->block_virt_addr = tmp_v_addr;
620 rx_blocks->block_dma_addr = tmp_p_addr;
621 rx_blocks->rxds = kmalloc(sizeof(struct rxd_info)*
622 rxd_count[nic->rxd_mode],
624 if (!rx_blocks->rxds)
626 for (l=0; l<rxd_count[nic->rxd_mode];l++) {
627 rx_blocks->rxds[l].virt_addr =
628 rx_blocks->block_virt_addr +
629 (rxd_size[nic->rxd_mode] * l);
630 rx_blocks->rxds[l].dma_addr =
631 rx_blocks->block_dma_addr +
632 (rxd_size[nic->rxd_mode] * l);
635 /* Interlinking all Rx Blocks */
636 for (j = 0; j < blk_cnt; j++) {
638 mac_control->rings[i].rx_blocks[j].block_virt_addr;
640 mac_control->rings[i].rx_blocks[(j + 1) %
641 blk_cnt].block_virt_addr;
643 mac_control->rings[i].rx_blocks[j].block_dma_addr;
645 mac_control->rings[i].rx_blocks[(j + 1) %
646 blk_cnt].block_dma_addr;
648 pre_rxd_blk = (struct RxD_block *) tmp_v_addr;
649 pre_rxd_blk->reserved_2_pNext_RxD_block =
650 (unsigned long) tmp_v_addr_next;
651 pre_rxd_blk->pNext_RxD_Blk_physical =
652 (u64) tmp_p_addr_next;
655 if (nic->rxd_mode >= RXD_MODE_3A) {
657 * Allocation of Storages for buffer addresses in 2BUFF mode
658 * and the buffers as well.
660 for (i = 0; i < config->rx_ring_num; i++) {
661 blk_cnt = config->rx_cfg[i].num_rxd /
662 (rxd_count[nic->rxd_mode]+ 1);
663 mac_control->rings[i].ba =
664 kmalloc((sizeof(struct buffAdd *) * blk_cnt),
666 if (!mac_control->rings[i].ba)
668 for (j = 0; j < blk_cnt; j++) {
670 mac_control->rings[i].ba[j] =
671 kmalloc((sizeof(struct buffAdd) *
672 (rxd_count[nic->rxd_mode] + 1)),
674 if (!mac_control->rings[i].ba[j])
676 while (k != rxd_count[nic->rxd_mode]) {
677 ba = &mac_control->rings[i].ba[j][k];
679 ba->ba_0_org = (void *) kmalloc
680 (BUF0_LEN + ALIGN_SIZE, GFP_KERNEL);
683 tmp = (unsigned long)ba->ba_0_org;
685 tmp &= ~((unsigned long) ALIGN_SIZE);
686 ba->ba_0 = (void *) tmp;
688 ba->ba_1_org = (void *) kmalloc
689 (BUF1_LEN + ALIGN_SIZE, GFP_KERNEL);
692 tmp = (unsigned long) ba->ba_1_org;
694 tmp &= ~((unsigned long) ALIGN_SIZE);
695 ba->ba_1 = (void *) tmp;
702 /* Allocation and initialization of Statistics block */
703 size = sizeof(struct stat_block);
704 mac_control->stats_mem = pci_alloc_consistent
705 (nic->pdev, size, &mac_control->stats_mem_phy);
707 if (!mac_control->stats_mem) {
709 * In case of failure, free_shared_mem() is called, which
710 * should free any memory that was alloced till the
715 mac_control->stats_mem_sz = size;
717 tmp_v_addr = mac_control->stats_mem;
718 mac_control->stats_info = (struct stat_block *) tmp_v_addr;
719 memset(tmp_v_addr, 0, size);
720 DBG_PRINT(INIT_DBG, "%s:Ring Mem PHY: 0x%llx\n", dev->name,
721 (unsigned long long) tmp_p_addr);
727 * free_shared_mem - Free the allocated Memory
728 * @nic: Device private variable.
729 * Description: This function is to free all memory locations allocated by
730 * the init_shared_mem() function and return it to the kernel.
733 static void free_shared_mem(struct s2io_nic *nic)
735 int i, j, blk_cnt, size;
737 dma_addr_t tmp_p_addr;
738 struct mac_info *mac_control;
739 struct config_param *config;
740 int lst_size, lst_per_page;
741 struct net_device *dev = nic->dev;
746 mac_control = &nic->mac_control;
747 config = &nic->config;
749 lst_size = (sizeof(struct TxD) * config->max_txds);
750 lst_per_page = PAGE_SIZE / lst_size;
752 for (i = 0; i < config->tx_fifo_num; i++) {
753 int page_num = TXD_MEM_PAGE_CNT(config->tx_cfg[i].fifo_len,
755 for (j = 0; j < page_num; j++) {
756 int mem_blks = (j * lst_per_page);
757 if (!mac_control->fifos[i].list_info)
759 if (!mac_control->fifos[i].list_info[mem_blks].
762 pci_free_consistent(nic->pdev, PAGE_SIZE,
763 mac_control->fifos[i].
766 mac_control->fifos[i].
770 /* If we got a zero DMA address during allocation,
773 if (mac_control->zerodma_virt_addr) {
774 pci_free_consistent(nic->pdev, PAGE_SIZE,
775 mac_control->zerodma_virt_addr,
778 "%s: Freeing TxDL with zero DMA addr. ",
780 DBG_PRINT(INIT_DBG, "Virtual address %p\n",
781 mac_control->zerodma_virt_addr);
783 kfree(mac_control->fifos[i].list_info);
786 size = SIZE_OF_BLOCK;
787 for (i = 0; i < config->rx_ring_num; i++) {
788 blk_cnt = mac_control->rings[i].block_count;
789 for (j = 0; j < blk_cnt; j++) {
790 tmp_v_addr = mac_control->rings[i].rx_blocks[j].
792 tmp_p_addr = mac_control->rings[i].rx_blocks[j].
794 if (tmp_v_addr == NULL)
796 pci_free_consistent(nic->pdev, size,
797 tmp_v_addr, tmp_p_addr);
798 kfree(mac_control->rings[i].rx_blocks[j].rxds);
802 if (nic->rxd_mode >= RXD_MODE_3A) {
803 /* Freeing buffer storage addresses in 2BUFF mode. */
804 for (i = 0; i < config->rx_ring_num; i++) {
805 blk_cnt = config->rx_cfg[i].num_rxd /
806 (rxd_count[nic->rxd_mode] + 1);
807 for (j = 0; j < blk_cnt; j++) {
809 if (!mac_control->rings[i].ba[j])
811 while (k != rxd_count[nic->rxd_mode]) {
813 &mac_control->rings[i].ba[j][k];
818 kfree(mac_control->rings[i].ba[j]);
820 kfree(mac_control->rings[i].ba);
824 if (mac_control->stats_mem) {
825 pci_free_consistent(nic->pdev,
826 mac_control->stats_mem_sz,
827 mac_control->stats_mem,
828 mac_control->stats_mem_phy);
830 if (nic->ufo_in_band_v)
831 kfree(nic->ufo_in_band_v);
835 * s2io_verify_pci_mode -
838 static int s2io_verify_pci_mode(struct s2io_nic *nic)
840 struct XENA_dev_config __iomem *bar0 = nic->bar0;
841 register u64 val64 = 0;
844 val64 = readq(&bar0->pci_mode);
845 mode = (u8)GET_PCI_MODE(val64);
847 if ( val64 & PCI_MODE_UNKNOWN_MODE)
848 return -1; /* Unknown PCI mode */
852 #define NEC_VENID 0x1033
853 #define NEC_DEVID 0x0125
854 static int s2io_on_nec_bridge(struct pci_dev *s2io_pdev)
856 struct pci_dev *tdev = NULL;
857 while ((tdev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, tdev)) != NULL) {
858 if (tdev->vendor == NEC_VENID && tdev->device == NEC_DEVID) {
859 if (tdev->bus == s2io_pdev->bus->parent)
867 static int bus_speed[8] = {33, 133, 133, 200, 266, 133, 200, 266};
869 * s2io_print_pci_mode -
871 static int s2io_print_pci_mode(struct s2io_nic *nic)
873 struct XENA_dev_config __iomem *bar0 = nic->bar0;
874 register u64 val64 = 0;
876 struct config_param *config = &nic->config;
878 val64 = readq(&bar0->pci_mode);
879 mode = (u8)GET_PCI_MODE(val64);
881 if ( val64 & PCI_MODE_UNKNOWN_MODE)
882 return -1; /* Unknown PCI mode */
884 config->bus_speed = bus_speed[mode];
886 if (s2io_on_nec_bridge(nic->pdev)) {
887 DBG_PRINT(ERR_DBG, "%s: Device is on PCI-E bus\n",
892 if (val64 & PCI_MODE_32_BITS) {
893 DBG_PRINT(ERR_DBG, "%s: Device is on 32 bit ", nic->dev->name);
895 DBG_PRINT(ERR_DBG, "%s: Device is on 64 bit ", nic->dev->name);
899 case PCI_MODE_PCI_33:
900 DBG_PRINT(ERR_DBG, "33MHz PCI bus\n");
902 case PCI_MODE_PCI_66:
903 DBG_PRINT(ERR_DBG, "66MHz PCI bus\n");
905 case PCI_MODE_PCIX_M1_66:
906 DBG_PRINT(ERR_DBG, "66MHz PCIX(M1) bus\n");
908 case PCI_MODE_PCIX_M1_100:
909 DBG_PRINT(ERR_DBG, "100MHz PCIX(M1) bus\n");
911 case PCI_MODE_PCIX_M1_133:
912 DBG_PRINT(ERR_DBG, "133MHz PCIX(M1) bus\n");
914 case PCI_MODE_PCIX_M2_66:
915 DBG_PRINT(ERR_DBG, "133MHz PCIX(M2) bus\n");
917 case PCI_MODE_PCIX_M2_100:
918 DBG_PRINT(ERR_DBG, "200MHz PCIX(M2) bus\n");
920 case PCI_MODE_PCIX_M2_133:
921 DBG_PRINT(ERR_DBG, "266MHz PCIX(M2) bus\n");
924 return -1; /* Unsupported bus speed */
931 * init_nic - Initialization of hardware
932 * @nic: device peivate variable
933 * Description: The function sequentially configures every block
934 * of the H/W from their reset values.
935 * Return Value: SUCCESS on success and
936 * '-1' on failure (endian settings incorrect).
939 static int init_nic(struct s2io_nic *nic)
941 struct XENA_dev_config __iomem *bar0 = nic->bar0;
942 struct net_device *dev = nic->dev;
943 register u64 val64 = 0;
947 struct mac_info *mac_control;
948 struct config_param *config;
950 unsigned long long mem_share;
953 mac_control = &nic->mac_control;
954 config = &nic->config;
956 /* to set the swapper controle on the card */
957 if(s2io_set_swapper(nic)) {
958 DBG_PRINT(ERR_DBG,"ERROR: Setting Swapper failed\n");
963 * Herc requires EOI to be removed from reset before XGXS, so..
965 if (nic->device_type & XFRAME_II_DEVICE) {
966 val64 = 0xA500000000ULL;
967 writeq(val64, &bar0->sw_reset);
969 val64 = readq(&bar0->sw_reset);
972 /* Remove XGXS from reset state */
974 writeq(val64, &bar0->sw_reset);
976 val64 = readq(&bar0->sw_reset);
978 /* Enable Receiving broadcasts */
979 add = &bar0->mac_cfg;
980 val64 = readq(&bar0->mac_cfg);
981 val64 |= MAC_RMAC_BCAST_ENABLE;
982 writeq(RMAC_CFG_KEY(0x4C0D), &bar0->rmac_cfg_key);
983 writel((u32) val64, add);
984 writeq(RMAC_CFG_KEY(0x4C0D), &bar0->rmac_cfg_key);
985 writel((u32) (val64 >> 32), (add + 4));
987 /* Read registers in all blocks */
988 val64 = readq(&bar0->mac_int_mask);
989 val64 = readq(&bar0->mc_int_mask);
990 val64 = readq(&bar0->xgxs_int_mask);
994 writeq(vBIT(val64, 2, 14), &bar0->rmac_max_pyld_len);
996 if (nic->device_type & XFRAME_II_DEVICE) {
997 while (herc_act_dtx_cfg[dtx_cnt] != END_SIGN) {
998 SPECIAL_REG_WRITE(herc_act_dtx_cfg[dtx_cnt],
999 &bar0->dtx_control, UF);
1001 msleep(1); /* Necessary!! */
1005 while (xena_dtx_cfg[dtx_cnt] != END_SIGN) {
1006 SPECIAL_REG_WRITE(xena_dtx_cfg[dtx_cnt],
1007 &bar0->dtx_control, UF);
1008 val64 = readq(&bar0->dtx_control);
1013 /* Tx DMA Initialization */
1015 writeq(val64, &bar0->tx_fifo_partition_0);
1016 writeq(val64, &bar0->tx_fifo_partition_1);
1017 writeq(val64, &bar0->tx_fifo_partition_2);
1018 writeq(val64, &bar0->tx_fifo_partition_3);
1021 for (i = 0, j = 0; i < config->tx_fifo_num; i++) {
1023 vBIT(config->tx_cfg[i].fifo_len - 1, ((i * 32) + 19),
1024 13) | vBIT(config->tx_cfg[i].fifo_priority,
1027 if (i == (config->tx_fifo_num - 1)) {
1034 writeq(val64, &bar0->tx_fifo_partition_0);
1038 writeq(val64, &bar0->tx_fifo_partition_1);
1042 writeq(val64, &bar0->tx_fifo_partition_2);
1046 writeq(val64, &bar0->tx_fifo_partition_3);
1052 * Disable 4 PCCs for Xena1, 2 and 3 as per H/W bug
1053 * SXE-008 TRANSMIT DMA ARBITRATION ISSUE.
1055 if ((nic->device_type == XFRAME_I_DEVICE) &&
1056 (get_xena_rev_id(nic->pdev) < 4))
1057 writeq(PCC_ENABLE_FOUR, &bar0->pcc_enable);
1059 val64 = readq(&bar0->tx_fifo_partition_0);
1060 DBG_PRINT(INIT_DBG, "Fifo partition at: 0x%p is: 0x%llx\n",
1061 &bar0->tx_fifo_partition_0, (unsigned long long) val64);
1064 * Initialization of Tx_PA_CONFIG register to ignore packet
1065 * integrity checking.
1067 val64 = readq(&bar0->tx_pa_cfg);
1068 val64 |= TX_PA_CFG_IGNORE_FRM_ERR | TX_PA_CFG_IGNORE_SNAP_OUI |
1069 TX_PA_CFG_IGNORE_LLC_CTRL | TX_PA_CFG_IGNORE_L2_ERR;
1070 writeq(val64, &bar0->tx_pa_cfg);
1072 /* Rx DMA intialization. */
1074 for (i = 0; i < config->rx_ring_num; i++) {
1076 vBIT(config->rx_cfg[i].ring_priority, (5 + (i * 8)),
1079 writeq(val64, &bar0->rx_queue_priority);
1082 * Allocating equal share of memory to all the
1086 if (nic->device_type & XFRAME_II_DEVICE)
1091 for (i = 0; i < config->rx_ring_num; i++) {
1094 mem_share = (mem_size / config->rx_ring_num +
1095 mem_size % config->rx_ring_num);
1096 val64 |= RX_QUEUE_CFG_Q0_SZ(mem_share);
1099 mem_share = (mem_size / config->rx_ring_num);
1100 val64 |= RX_QUEUE_CFG_Q1_SZ(mem_share);
1103 mem_share = (mem_size / config->rx_ring_num);
1104 val64 |= RX_QUEUE_CFG_Q2_SZ(mem_share);
1107 mem_share = (mem_size / config->rx_ring_num);
1108 val64 |= RX_QUEUE_CFG_Q3_SZ(mem_share);
1111 mem_share = (mem_size / config->rx_ring_num);
1112 val64 |= RX_QUEUE_CFG_Q4_SZ(mem_share);
1115 mem_share = (mem_size / config->rx_ring_num);
1116 val64 |= RX_QUEUE_CFG_Q5_SZ(mem_share);
1119 mem_share = (mem_size / config->rx_ring_num);
1120 val64 |= RX_QUEUE_CFG_Q6_SZ(mem_share);
1123 mem_share = (mem_size / config->rx_ring_num);
1124 val64 |= RX_QUEUE_CFG_Q7_SZ(mem_share);
1128 writeq(val64, &bar0->rx_queue_cfg);
1131 * Filling Tx round robin registers
1132 * as per the number of FIFOs
1134 switch (config->tx_fifo_num) {
1136 val64 = 0x0000000000000000ULL;
1137 writeq(val64, &bar0->tx_w_round_robin_0);
1138 writeq(val64, &bar0->tx_w_round_robin_1);
1139 writeq(val64, &bar0->tx_w_round_robin_2);
1140 writeq(val64, &bar0->tx_w_round_robin_3);
1141 writeq(val64, &bar0->tx_w_round_robin_4);
1144 val64 = 0x0000010000010000ULL;
1145 writeq(val64, &bar0->tx_w_round_robin_0);
1146 val64 = 0x0100000100000100ULL;
1147 writeq(val64, &bar0->tx_w_round_robin_1);
1148 val64 = 0x0001000001000001ULL;
1149 writeq(val64, &bar0->tx_w_round_robin_2);
1150 val64 = 0x0000010000010000ULL;
1151 writeq(val64, &bar0->tx_w_round_robin_3);
1152 val64 = 0x0100000000000000ULL;
1153 writeq(val64, &bar0->tx_w_round_robin_4);
1156 val64 = 0x0001000102000001ULL;
1157 writeq(val64, &bar0->tx_w_round_robin_0);
1158 val64 = 0x0001020000010001ULL;
1159 writeq(val64, &bar0->tx_w_round_robin_1);
1160 val64 = 0x0200000100010200ULL;
1161 writeq(val64, &bar0->tx_w_round_robin_2);
1162 val64 = 0x0001000102000001ULL;
1163 writeq(val64, &bar0->tx_w_round_robin_3);
1164 val64 = 0x0001020000000000ULL;
1165 writeq(val64, &bar0->tx_w_round_robin_4);
1168 val64 = 0x0001020300010200ULL;
1169 writeq(val64, &bar0->tx_w_round_robin_0);
1170 val64 = 0x0100000102030001ULL;
1171 writeq(val64, &bar0->tx_w_round_robin_1);
1172 val64 = 0x0200010000010203ULL;
1173 writeq(val64, &bar0->tx_w_round_robin_2);
1174 val64 = 0x0001020001000001ULL;
1175 writeq(val64, &bar0->tx_w_round_robin_3);
1176 val64 = 0x0203000100000000ULL;
1177 writeq(val64, &bar0->tx_w_round_robin_4);
1180 val64 = 0x0001000203000102ULL;
1181 writeq(val64, &bar0->tx_w_round_robin_0);
1182 val64 = 0x0001020001030004ULL;
1183 writeq(val64, &bar0->tx_w_round_robin_1);
1184 val64 = 0x0001000203000102ULL;
1185 writeq(val64, &bar0->tx_w_round_robin_2);
1186 val64 = 0x0001020001030004ULL;
1187 writeq(val64, &bar0->tx_w_round_robin_3);
1188 val64 = 0x0001000000000000ULL;
1189 writeq(val64, &bar0->tx_w_round_robin_4);
1192 val64 = 0x0001020304000102ULL;
1193 writeq(val64, &bar0->tx_w_round_robin_0);
1194 val64 = 0x0304050001020001ULL;
1195 writeq(val64, &bar0->tx_w_round_robin_1);
1196 val64 = 0x0203000100000102ULL;
1197 writeq(val64, &bar0->tx_w_round_robin_2);
1198 val64 = 0x0304000102030405ULL;
1199 writeq(val64, &bar0->tx_w_round_robin_3);
1200 val64 = 0x0001000200000000ULL;
1201 writeq(val64, &bar0->tx_w_round_robin_4);
1204 val64 = 0x0001020001020300ULL;
1205 writeq(val64, &bar0->tx_w_round_robin_0);
1206 val64 = 0x0102030400010203ULL;
1207 writeq(val64, &bar0->tx_w_round_robin_1);
1208 val64 = 0x0405060001020001ULL;
1209 writeq(val64, &bar0->tx_w_round_robin_2);
1210 val64 = 0x0304050000010200ULL;
1211 writeq(val64, &bar0->tx_w_round_robin_3);
1212 val64 = 0x0102030000000000ULL;
1213 writeq(val64, &bar0->tx_w_round_robin_4);
1216 val64 = 0x0001020300040105ULL;
1217 writeq(val64, &bar0->tx_w_round_robin_0);
1218 val64 = 0x0200030106000204ULL;
1219 writeq(val64, &bar0->tx_w_round_robin_1);
1220 val64 = 0x0103000502010007ULL;
1221 writeq(val64, &bar0->tx_w_round_robin_2);
1222 val64 = 0x0304010002060500ULL;
1223 writeq(val64, &bar0->tx_w_round_robin_3);
1224 val64 = 0x0103020400000000ULL;
1225 writeq(val64, &bar0->tx_w_round_robin_4);
1229 /* Enable all configured Tx FIFO partitions */
1230 val64 = readq(&bar0->tx_fifo_partition_0);
1231 val64 |= (TX_FIFO_PARTITION_EN);
1232 writeq(val64, &bar0->tx_fifo_partition_0);
1234 /* Filling the Rx round robin registers as per the
1235 * number of Rings and steering based on QoS.
1237 switch (config->rx_ring_num) {
1239 val64 = 0x8080808080808080ULL;
1240 writeq(val64, &bar0->rts_qos_steering);
1243 val64 = 0x0000010000010000ULL;
1244 writeq(val64, &bar0->rx_w_round_robin_0);
1245 val64 = 0x0100000100000100ULL;
1246 writeq(val64, &bar0->rx_w_round_robin_1);
1247 val64 = 0x0001000001000001ULL;
1248 writeq(val64, &bar0->rx_w_round_robin_2);
1249 val64 = 0x0000010000010000ULL;
1250 writeq(val64, &bar0->rx_w_round_robin_3);
1251 val64 = 0x0100000000000000ULL;
1252 writeq(val64, &bar0->rx_w_round_robin_4);
1254 val64 = 0x8080808040404040ULL;
1255 writeq(val64, &bar0->rts_qos_steering);
1258 val64 = 0x0001000102000001ULL;
1259 writeq(val64, &bar0->rx_w_round_robin_0);
1260 val64 = 0x0001020000010001ULL;
1261 writeq(val64, &bar0->rx_w_round_robin_1);
1262 val64 = 0x0200000100010200ULL;
1263 writeq(val64, &bar0->rx_w_round_robin_2);
1264 val64 = 0x0001000102000001ULL;
1265 writeq(val64, &bar0->rx_w_round_robin_3);
1266 val64 = 0x0001020000000000ULL;
1267 writeq(val64, &bar0->rx_w_round_robin_4);
1269 val64 = 0x8080804040402020ULL;
1270 writeq(val64, &bar0->rts_qos_steering);
1273 val64 = 0x0001020300010200ULL;
1274 writeq(val64, &bar0->rx_w_round_robin_0);
1275 val64 = 0x0100000102030001ULL;
1276 writeq(val64, &bar0->rx_w_round_robin_1);
1277 val64 = 0x0200010000010203ULL;
1278 writeq(val64, &bar0->rx_w_round_robin_2);
1279 val64 = 0x0001020001000001ULL;
1280 writeq(val64, &bar0->rx_w_round_robin_3);
1281 val64 = 0x0203000100000000ULL;
1282 writeq(val64, &bar0->rx_w_round_robin_4);
1284 val64 = 0x8080404020201010ULL;
1285 writeq(val64, &bar0->rts_qos_steering);
1288 val64 = 0x0001000203000102ULL;
1289 writeq(val64, &bar0->rx_w_round_robin_0);
1290 val64 = 0x0001020001030004ULL;
1291 writeq(val64, &bar0->rx_w_round_robin_1);
1292 val64 = 0x0001000203000102ULL;
1293 writeq(val64, &bar0->rx_w_round_robin_2);
1294 val64 = 0x0001020001030004ULL;
1295 writeq(val64, &bar0->rx_w_round_robin_3);
1296 val64 = 0x0001000000000000ULL;
1297 writeq(val64, &bar0->rx_w_round_robin_4);
1299 val64 = 0x8080404020201008ULL;
1300 writeq(val64, &bar0->rts_qos_steering);
1303 val64 = 0x0001020304000102ULL;
1304 writeq(val64, &bar0->rx_w_round_robin_0);
1305 val64 = 0x0304050001020001ULL;
1306 writeq(val64, &bar0->rx_w_round_robin_1);
1307 val64 = 0x0203000100000102ULL;
1308 writeq(val64, &bar0->rx_w_round_robin_2);
1309 val64 = 0x0304000102030405ULL;
1310 writeq(val64, &bar0->rx_w_round_robin_3);
1311 val64 = 0x0001000200000000ULL;
1312 writeq(val64, &bar0->rx_w_round_robin_4);
1314 val64 = 0x8080404020100804ULL;
1315 writeq(val64, &bar0->rts_qos_steering);
1318 val64 = 0x0001020001020300ULL;
1319 writeq(val64, &bar0->rx_w_round_robin_0);
1320 val64 = 0x0102030400010203ULL;
1321 writeq(val64, &bar0->rx_w_round_robin_1);
1322 val64 = 0x0405060001020001ULL;
1323 writeq(val64, &bar0->rx_w_round_robin_2);
1324 val64 = 0x0304050000010200ULL;
1325 writeq(val64, &bar0->rx_w_round_robin_3);
1326 val64 = 0x0102030000000000ULL;
1327 writeq(val64, &bar0->rx_w_round_robin_4);
1329 val64 = 0x8080402010080402ULL;
1330 writeq(val64, &bar0->rts_qos_steering);
1333 val64 = 0x0001020300040105ULL;
1334 writeq(val64, &bar0->rx_w_round_robin_0);
1335 val64 = 0x0200030106000204ULL;
1336 writeq(val64, &bar0->rx_w_round_robin_1);
1337 val64 = 0x0103000502010007ULL;
1338 writeq(val64, &bar0->rx_w_round_robin_2);
1339 val64 = 0x0304010002060500ULL;
1340 writeq(val64, &bar0->rx_w_round_robin_3);
1341 val64 = 0x0103020400000000ULL;
1342 writeq(val64, &bar0->rx_w_round_robin_4);
1344 val64 = 0x8040201008040201ULL;
1345 writeq(val64, &bar0->rts_qos_steering);
1351 for (i = 0; i < 8; i++)
1352 writeq(val64, &bar0->rts_frm_len_n[i]);
1354 /* Set the default rts frame length for the rings configured */
1355 val64 = MAC_RTS_FRM_LEN_SET(dev->mtu+22);
1356 for (i = 0 ; i < config->rx_ring_num ; i++)
1357 writeq(val64, &bar0->rts_frm_len_n[i]);
1359 /* Set the frame length for the configured rings
1360 * desired by the user
1362 for (i = 0; i < config->rx_ring_num; i++) {
1363 /* If rts_frm_len[i] == 0 then it is assumed that user not
1364 * specified frame length steering.
1365 * If the user provides the frame length then program
1366 * the rts_frm_len register for those values or else
1367 * leave it as it is.
1369 if (rts_frm_len[i] != 0) {
1370 writeq(MAC_RTS_FRM_LEN_SET(rts_frm_len[i]),
1371 &bar0->rts_frm_len_n[i]);
1375 /* Program statistics memory */
1376 writeq(mac_control->stats_mem_phy, &bar0->stat_addr);
1378 if (nic->device_type == XFRAME_II_DEVICE) {
1379 val64 = STAT_BC(0x320);
1380 writeq(val64, &bar0->stat_byte_cnt);
1384 * Initializing the sampling rate for the device to calculate the
1385 * bandwidth utilization.
1387 val64 = MAC_TX_LINK_UTIL_VAL(tmac_util_period) |
1388 MAC_RX_LINK_UTIL_VAL(rmac_util_period);
1389 writeq(val64, &bar0->mac_link_util);
1393 * Initializing the Transmit and Receive Traffic Interrupt
1397 * TTI Initialization. Default Tx timer gets us about
1398 * 250 interrupts per sec. Continuous interrupts are enabled
1401 if (nic->device_type == XFRAME_II_DEVICE) {
1402 int count = (nic->config.bus_speed * 125)/2;
1403 val64 = TTI_DATA1_MEM_TX_TIMER_VAL(count);
1406 val64 = TTI_DATA1_MEM_TX_TIMER_VAL(0x2078);
1408 val64 |= TTI_DATA1_MEM_TX_URNG_A(0xA) |
1409 TTI_DATA1_MEM_TX_URNG_B(0x10) |
1410 TTI_DATA1_MEM_TX_URNG_C(0x30) | TTI_DATA1_MEM_TX_TIMER_AC_EN;
1411 if (use_continuous_tx_intrs)
1412 val64 |= TTI_DATA1_MEM_TX_TIMER_CI_EN;
1413 writeq(val64, &bar0->tti_data1_mem);
1415 val64 = TTI_DATA2_MEM_TX_UFC_A(0x10) |
1416 TTI_DATA2_MEM_TX_UFC_B(0x20) |
1417 TTI_DATA2_MEM_TX_UFC_C(0x40) | TTI_DATA2_MEM_TX_UFC_D(0x80);
1418 writeq(val64, &bar0->tti_data2_mem);
1420 val64 = TTI_CMD_MEM_WE | TTI_CMD_MEM_STROBE_NEW_CMD;
1421 writeq(val64, &bar0->tti_command_mem);
1424 * Once the operation completes, the Strobe bit of the command
1425 * register will be reset. We poll for this particular condition
1426 * We wait for a maximum of 500ms for the operation to complete,
1427 * if it's not complete by then we return error.
1431 val64 = readq(&bar0->tti_command_mem);
1432 if (!(val64 & TTI_CMD_MEM_STROBE_NEW_CMD)) {
1436 DBG_PRINT(ERR_DBG, "%s: TTI init Failed\n",
1444 if (nic->config.bimodal) {
1446 for (k = 0; k < config->rx_ring_num; k++) {
1447 val64 = TTI_CMD_MEM_WE | TTI_CMD_MEM_STROBE_NEW_CMD;
1448 val64 |= TTI_CMD_MEM_OFFSET(0x38+k);
1449 writeq(val64, &bar0->tti_command_mem);
1452 * Once the operation completes, the Strobe bit of the command
1453 * register will be reset. We poll for this particular condition
1454 * We wait for a maximum of 500ms for the operation to complete,
1455 * if it's not complete by then we return error.
1459 val64 = readq(&bar0->tti_command_mem);
1460 if (!(val64 & TTI_CMD_MEM_STROBE_NEW_CMD)) {
1465 "%s: TTI init Failed\n",
1475 /* RTI Initialization */
1476 if (nic->device_type == XFRAME_II_DEVICE) {
1478 * Programmed to generate Apprx 500 Intrs per
1481 int count = (nic->config.bus_speed * 125)/4;
1482 val64 = RTI_DATA1_MEM_RX_TIMER_VAL(count);
1484 val64 = RTI_DATA1_MEM_RX_TIMER_VAL(0xFFF);
1486 val64 |= RTI_DATA1_MEM_RX_URNG_A(0xA) |
1487 RTI_DATA1_MEM_RX_URNG_B(0x10) |
1488 RTI_DATA1_MEM_RX_URNG_C(0x30) | RTI_DATA1_MEM_RX_TIMER_AC_EN;
1490 writeq(val64, &bar0->rti_data1_mem);
1492 val64 = RTI_DATA2_MEM_RX_UFC_A(0x1) |
1493 RTI_DATA2_MEM_RX_UFC_B(0x2) ;
1494 if (nic->intr_type == MSI_X)
1495 val64 |= (RTI_DATA2_MEM_RX_UFC_C(0x20) | \
1496 RTI_DATA2_MEM_RX_UFC_D(0x40));
1498 val64 |= (RTI_DATA2_MEM_RX_UFC_C(0x40) | \
1499 RTI_DATA2_MEM_RX_UFC_D(0x80));
1500 writeq(val64, &bar0->rti_data2_mem);
1502 for (i = 0; i < config->rx_ring_num; i++) {
1503 val64 = RTI_CMD_MEM_WE | RTI_CMD_MEM_STROBE_NEW_CMD
1504 | RTI_CMD_MEM_OFFSET(i);
1505 writeq(val64, &bar0->rti_command_mem);
1508 * Once the operation completes, the Strobe bit of the
1509 * command register will be reset. We poll for this
1510 * particular condition. We wait for a maximum of 500ms
1511 * for the operation to complete, if it's not complete
1512 * by then we return error.
1516 val64 = readq(&bar0->rti_command_mem);
1517 if (!(val64 & RTI_CMD_MEM_STROBE_NEW_CMD)) {
1521 DBG_PRINT(ERR_DBG, "%s: RTI init Failed\n",
1532 * Initializing proper values as Pause threshold into all
1533 * the 8 Queues on Rx side.
1535 writeq(0xffbbffbbffbbffbbULL, &bar0->mc_pause_thresh_q0q3);
1536 writeq(0xffbbffbbffbbffbbULL, &bar0->mc_pause_thresh_q4q7);
1538 /* Disable RMAC PAD STRIPPING */
1539 add = &bar0->mac_cfg;
1540 val64 = readq(&bar0->mac_cfg);
1541 val64 &= ~(MAC_CFG_RMAC_STRIP_PAD);
1542 writeq(RMAC_CFG_KEY(0x4C0D), &bar0->rmac_cfg_key);
1543 writel((u32) (val64), add);
1544 writeq(RMAC_CFG_KEY(0x4C0D), &bar0->rmac_cfg_key);
1545 writel((u32) (val64 >> 32), (add + 4));
1546 val64 = readq(&bar0->mac_cfg);
1548 /* Enable FCS stripping by adapter */
1549 add = &bar0->mac_cfg;
1550 val64 = readq(&bar0->mac_cfg);
1551 val64 |= MAC_CFG_RMAC_STRIP_FCS;
1552 if (nic->device_type == XFRAME_II_DEVICE)
1553 writeq(val64, &bar0->mac_cfg);
1555 writeq(RMAC_CFG_KEY(0x4C0D), &bar0->rmac_cfg_key);
1556 writel((u32) (val64), add);
1557 writeq(RMAC_CFG_KEY(0x4C0D), &bar0->rmac_cfg_key);
1558 writel((u32) (val64 >> 32), (add + 4));
1562 * Set the time value to be inserted in the pause frame
1563 * generated by xena.
1565 val64 = readq(&bar0->rmac_pause_cfg);
1566 val64 &= ~(RMAC_PAUSE_HG_PTIME(0xffff));
1567 val64 |= RMAC_PAUSE_HG_PTIME(nic->mac_control.rmac_pause_time);
1568 writeq(val64, &bar0->rmac_pause_cfg);
1571 * Set the Threshold Limit for Generating the pause frame
1572 * If the amount of data in any Queue exceeds ratio of
1573 * (mac_control.mc_pause_threshold_q0q3 or q4q7)/256
1574 * pause frame is generated
1577 for (i = 0; i < 4; i++) {
1579 (((u64) 0xFF00 | nic->mac_control.
1580 mc_pause_threshold_q0q3)
1583 writeq(val64, &bar0->mc_pause_thresh_q0q3);
1586 for (i = 0; i < 4; i++) {
1588 (((u64) 0xFF00 | nic->mac_control.
1589 mc_pause_threshold_q4q7)
1592 writeq(val64, &bar0->mc_pause_thresh_q4q7);
1595 * TxDMA will stop Read request if the number of read split has
1596 * exceeded the limit pointed by shared_splits
1598 val64 = readq(&bar0->pic_control);
1599 val64 |= PIC_CNTL_SHARED_SPLITS(shared_splits);
1600 writeq(val64, &bar0->pic_control);
1602 if (nic->config.bus_speed == 266) {
1603 writeq(TXREQTO_VAL(0x7f) | TXREQTO_EN, &bar0->txreqtimeout);
1604 writeq(0x0, &bar0->read_retry_delay);
1605 writeq(0x0, &bar0->write_retry_delay);
1609 * Programming the Herc to split every write transaction
1610 * that does not start on an ADB to reduce disconnects.
1612 if (nic->device_type == XFRAME_II_DEVICE) {
1613 val64 = FAULT_BEHAVIOUR | EXT_REQ_EN |
1614 MISC_LINK_STABILITY_PRD(3);
1615 writeq(val64, &bar0->misc_control);
1616 val64 = readq(&bar0->pic_control2);
1617 val64 &= ~(BIT(13)|BIT(14)|BIT(15));
1618 writeq(val64, &bar0->pic_control2);
1620 if (strstr(nic->product_name, "CX4")) {
1621 val64 = TMAC_AVG_IPG(0x17);
1622 writeq(val64, &bar0->tmac_avg_ipg);
1627 #define LINK_UP_DOWN_INTERRUPT 1
1628 #define MAC_RMAC_ERR_TIMER 2
1630 static int s2io_link_fault_indication(struct s2io_nic *nic)
1632 if (nic->intr_type != INTA)
1633 return MAC_RMAC_ERR_TIMER;
1634 if (nic->device_type == XFRAME_II_DEVICE)
1635 return LINK_UP_DOWN_INTERRUPT;
1637 return MAC_RMAC_ERR_TIMER;
1641 * en_dis_able_nic_intrs - Enable or Disable the interrupts
1642 * @nic: device private variable,
1643 * @mask: A mask indicating which Intr block must be modified and,
1644 * @flag: A flag indicating whether to enable or disable the Intrs.
1645 * Description: This function will either disable or enable the interrupts
1646 * depending on the flag argument. The mask argument can be used to
1647 * enable/disable any Intr block.
1648 * Return Value: NONE.
1651 static void en_dis_able_nic_intrs(struct s2io_nic *nic, u16 mask, int flag)
1653 struct XENA_dev_config __iomem *bar0 = nic->bar0;
1654 register u64 val64 = 0, temp64 = 0;
1656 /* Top level interrupt classification */
1657 /* PIC Interrupts */
1658 if ((mask & (TX_PIC_INTR | RX_PIC_INTR))) {
1659 /* Enable PIC Intrs in the general intr mask register */
1660 val64 = TXPIC_INT_M;
1661 if (flag == ENABLE_INTRS) {
1662 temp64 = readq(&bar0->general_int_mask);
1663 temp64 &= ~((u64) val64);
1664 writeq(temp64, &bar0->general_int_mask);
1666 * If Hercules adapter enable GPIO otherwise
1667 * disable all PCIX, Flash, MDIO, IIC and GPIO
1668 * interrupts for now.
1671 if (s2io_link_fault_indication(nic) ==
1672 LINK_UP_DOWN_INTERRUPT ) {
1673 temp64 = readq(&bar0->pic_int_mask);
1674 temp64 &= ~((u64) PIC_INT_GPIO);
1675 writeq(temp64, &bar0->pic_int_mask);
1676 temp64 = readq(&bar0->gpio_int_mask);
1677 temp64 &= ~((u64) GPIO_INT_MASK_LINK_UP);
1678 writeq(temp64, &bar0->gpio_int_mask);
1680 writeq(DISABLE_ALL_INTRS, &bar0->pic_int_mask);
1683 * No MSI Support is available presently, so TTI and
1684 * RTI interrupts are also disabled.
1686 } else if (flag == DISABLE_INTRS) {
1688 * Disable PIC Intrs in the general
1689 * intr mask register
1691 writeq(DISABLE_ALL_INTRS, &bar0->pic_int_mask);
1692 temp64 = readq(&bar0->general_int_mask);
1694 writeq(val64, &bar0->general_int_mask);
1698 /* MAC Interrupts */
1699 /* Enabling/Disabling MAC interrupts */
1700 if (mask & (TX_MAC_INTR | RX_MAC_INTR)) {
1701 val64 = TXMAC_INT_M | RXMAC_INT_M;
1702 if (flag == ENABLE_INTRS) {
1703 temp64 = readq(&bar0->general_int_mask);
1704 temp64 &= ~((u64) val64);
1705 writeq(temp64, &bar0->general_int_mask);
1707 * All MAC block error interrupts are disabled for now
1710 } else if (flag == DISABLE_INTRS) {
1712 * Disable MAC Intrs in the general intr mask register
1714 writeq(DISABLE_ALL_INTRS, &bar0->mac_int_mask);
1715 writeq(DISABLE_ALL_INTRS,
1716 &bar0->mac_rmac_err_mask);
1718 temp64 = readq(&bar0->general_int_mask);
1720 writeq(val64, &bar0->general_int_mask);
1724 /* Tx traffic interrupts */
1725 if (mask & TX_TRAFFIC_INTR) {
1726 val64 = TXTRAFFIC_INT_M;
1727 if (flag == ENABLE_INTRS) {
1728 temp64 = readq(&bar0->general_int_mask);
1729 temp64 &= ~((u64) val64);
1730 writeq(temp64, &bar0->general_int_mask);
1732 * Enable all the Tx side interrupts
1733 * writing 0 Enables all 64 TX interrupt levels
1735 writeq(0x0, &bar0->tx_traffic_mask);
1736 } else if (flag == DISABLE_INTRS) {
1738 * Disable Tx Traffic Intrs in the general intr mask
1741 writeq(DISABLE_ALL_INTRS, &bar0->tx_traffic_mask);
1742 temp64 = readq(&bar0->general_int_mask);
1744 writeq(val64, &bar0->general_int_mask);
1748 /* Rx traffic interrupts */
1749 if (mask & RX_TRAFFIC_INTR) {
1750 val64 = RXTRAFFIC_INT_M;
1751 if (flag == ENABLE_INTRS) {
1752 temp64 = readq(&bar0->general_int_mask);
1753 temp64 &= ~((u64) val64);
1754 writeq(temp64, &bar0->general_int_mask);
1755 /* writing 0 Enables all 8 RX interrupt levels */
1756 writeq(0x0, &bar0->rx_traffic_mask);
1757 } else if (flag == DISABLE_INTRS) {
1759 * Disable Rx Traffic Intrs in the general intr mask
1762 writeq(DISABLE_ALL_INTRS, &bar0->rx_traffic_mask);
1763 temp64 = readq(&bar0->general_int_mask);
1765 writeq(val64, &bar0->general_int_mask);
1771 * verify_pcc_quiescent- Checks for PCC quiescent state
1772 * Return: 1 If PCC is quiescence
1773 * 0 If PCC is not quiescence
1775 static int verify_pcc_quiescent(struct s2io_nic *sp, int flag)
1778 struct XENA_dev_config __iomem *bar0 = sp->bar0;
1779 u64 val64 = readq(&bar0->adapter_status);
1781 herc = (sp->device_type == XFRAME_II_DEVICE);
1783 if (flag == FALSE) {
1784 if ((!herc && (get_xena_rev_id(sp->pdev) >= 4)) || herc) {
1785 if (!(val64 & ADAPTER_STATUS_RMAC_PCC_IDLE))
1788 if (!(val64 & ADAPTER_STATUS_RMAC_PCC_FOUR_IDLE))
1792 if ((!herc && (get_xena_rev_id(sp->pdev) >= 4)) || herc) {
1793 if (((val64 & ADAPTER_STATUS_RMAC_PCC_IDLE) ==
1794 ADAPTER_STATUS_RMAC_PCC_IDLE))
1797 if (((val64 & ADAPTER_STATUS_RMAC_PCC_FOUR_IDLE) ==
1798 ADAPTER_STATUS_RMAC_PCC_FOUR_IDLE))
1806 * verify_xena_quiescence - Checks whether the H/W is ready
1807 * Description: Returns whether the H/W is ready to go or not. Depending
1808 * on whether adapter enable bit was written or not the comparison
1809 * differs and the calling function passes the input argument flag to
1811 * Return: 1 If xena is quiescence
1812 * 0 If Xena is not quiescence
1815 static int verify_xena_quiescence(struct s2io_nic *sp)
1818 struct XENA_dev_config __iomem *bar0 = sp->bar0;
1819 u64 val64 = readq(&bar0->adapter_status);
1820 mode = s2io_verify_pci_mode(sp);
1822 if (!(val64 & ADAPTER_STATUS_TDMA_READY)) {
1823 DBG_PRINT(ERR_DBG, "%s", "TDMA is not ready!");
1826 if (!(val64 & ADAPTER_STATUS_RDMA_READY)) {
1827 DBG_PRINT(ERR_DBG, "%s", "RDMA is not ready!");
1830 if (!(val64 & ADAPTER_STATUS_PFC_READY)) {
1831 DBG_PRINT(ERR_DBG, "%s", "PFC is not ready!");
1834 if (!(val64 & ADAPTER_STATUS_TMAC_BUF_EMPTY)) {
1835 DBG_PRINT(ERR_DBG, "%s", "TMAC BUF is not empty!");
1838 if (!(val64 & ADAPTER_STATUS_PIC_QUIESCENT)) {
1839 DBG_PRINT(ERR_DBG, "%s", "PIC is not QUIESCENT!");
1842 if (!(val64 & ADAPTER_STATUS_MC_DRAM_READY)) {
1843 DBG_PRINT(ERR_DBG, "%s", "MC_DRAM is not ready!");
1846 if (!(val64 & ADAPTER_STATUS_MC_QUEUES_READY)) {
1847 DBG_PRINT(ERR_DBG, "%s", "MC_QUEUES is not ready!");
1850 if (!(val64 & ADAPTER_STATUS_M_PLL_LOCK)) {
1851 DBG_PRINT(ERR_DBG, "%s", "M_PLL is not locked!");
1856 * In PCI 33 mode, the P_PLL is not used, and therefore,
1857 * the the P_PLL_LOCK bit in the adapter_status register will
1860 if (!(val64 & ADAPTER_STATUS_P_PLL_LOCK) &&
1861 sp->device_type == XFRAME_II_DEVICE && mode !=
1863 DBG_PRINT(ERR_DBG, "%s", "P_PLL is not locked!");
1866 if (!((val64 & ADAPTER_STATUS_RC_PRC_QUIESCENT) ==
1867 ADAPTER_STATUS_RC_PRC_QUIESCENT)) {
1868 DBG_PRINT(ERR_DBG, "%s", "RC_PRC is not QUIESCENT!");
1875 * fix_mac_address - Fix for Mac addr problem on Alpha platforms
1876 * @sp: Pointer to device specifc structure
1878 * New procedure to clear mac address reading problems on Alpha platforms
1882 static void fix_mac_address(struct s2io_nic * sp)
1884 struct XENA_dev_config __iomem *bar0 = sp->bar0;
1888 while (fix_mac[i] != END_SIGN) {
1889 writeq(fix_mac[i++], &bar0->gpio_control);
1891 val64 = readq(&bar0->gpio_control);
1896 * start_nic - Turns the device on
1897 * @nic : device private variable.
1899 * This function actually turns the device on. Before this function is
1900 * called,all Registers are configured from their reset states
1901 * and shared memory is allocated but the NIC is still quiescent. On
1902 * calling this function, the device interrupts are cleared and the NIC is
1903 * literally switched on by writing into the adapter control register.
1905 * SUCCESS on success and -1 on failure.
1908 static int start_nic(struct s2io_nic *nic)
1910 struct XENA_dev_config __iomem *bar0 = nic->bar0;
1911 struct net_device *dev = nic->dev;
1912 register u64 val64 = 0;
1914 struct mac_info *mac_control;
1915 struct config_param *config;
1917 mac_control = &nic->mac_control;
1918 config = &nic->config;
1920 /* PRC Initialization and configuration */
1921 for (i = 0; i < config->rx_ring_num; i++) {
1922 writeq((u64) mac_control->rings[i].rx_blocks[0].block_dma_addr,
1923 &bar0->prc_rxd0_n[i]);
1925 val64 = readq(&bar0->prc_ctrl_n[i]);
1926 if (nic->config.bimodal)
1927 val64 |= PRC_CTRL_BIMODAL_INTERRUPT;
1928 if (nic->rxd_mode == RXD_MODE_1)
1929 val64 |= PRC_CTRL_RC_ENABLED;
1931 val64 |= PRC_CTRL_RC_ENABLED | PRC_CTRL_RING_MODE_3;
1932 if (nic->device_type == XFRAME_II_DEVICE)
1933 val64 |= PRC_CTRL_GROUP_READS;
1934 val64 &= ~PRC_CTRL_RXD_BACKOFF_INTERVAL(0xFFFFFF);
1935 val64 |= PRC_CTRL_RXD_BACKOFF_INTERVAL(0x1000);
1936 writeq(val64, &bar0->prc_ctrl_n[i]);
1939 if (nic->rxd_mode == RXD_MODE_3B) {
1940 /* Enabling 2 buffer mode by writing into Rx_pa_cfg reg. */
1941 val64 = readq(&bar0->rx_pa_cfg);
1942 val64 |= RX_PA_CFG_IGNORE_L2_ERR;
1943 writeq(val64, &bar0->rx_pa_cfg);
1947 * Enabling MC-RLDRAM. After enabling the device, we timeout
1948 * for around 100ms, which is approximately the time required
1949 * for the device to be ready for operation.
1951 val64 = readq(&bar0->mc_rldram_mrs);
1952 val64 |= MC_RLDRAM_QUEUE_SIZE_ENABLE | MC_RLDRAM_MRS_ENABLE;
1953 SPECIAL_REG_WRITE(val64, &bar0->mc_rldram_mrs, UF);
1954 val64 = readq(&bar0->mc_rldram_mrs);
1956 msleep(100); /* Delay by around 100 ms. */
1958 /* Enabling ECC Protection. */
1959 val64 = readq(&bar0->adapter_control);
1960 val64 &= ~ADAPTER_ECC_EN;
1961 writeq(val64, &bar0->adapter_control);
1964 * Clearing any possible Link state change interrupts that
1965 * could have popped up just before Enabling the card.
1967 val64 = readq(&bar0->mac_rmac_err_reg);
1969 writeq(val64, &bar0->mac_rmac_err_reg);
1972 * Verify if the device is ready to be enabled, if so enable
1975 val64 = readq(&bar0->adapter_status);
1976 if (!verify_xena_quiescence(nic)) {
1977 DBG_PRINT(ERR_DBG, "%s: device is not ready, ", dev->name);
1978 DBG_PRINT(ERR_DBG, "Adapter status reads: 0x%llx\n",
1979 (unsigned long long) val64);
1984 * With some switches, link might be already up at this point.
1985 * Because of this weird behavior, when we enable laser,
1986 * we may not get link. We need to handle this. We cannot
1987 * figure out which switch is misbehaving. So we are forced to
1988 * make a global change.
1991 /* Enabling Laser. */
1992 val64 = readq(&bar0->adapter_control);
1993 val64 |= ADAPTER_EOI_TX_ON;
1994 writeq(val64, &bar0->adapter_control);
1996 if (s2io_link_fault_indication(nic) == MAC_RMAC_ERR_TIMER) {
1998 * Dont see link state interrupts initally on some switches,
1999 * so directly scheduling the link state task here.
2001 schedule_work(&nic->set_link_task);
2003 /* SXE-002: Initialize link and activity LED */
2004 subid = nic->pdev->subsystem_device;
2005 if (((subid & 0xFF) >= 0x07) &&
2006 (nic->device_type == XFRAME_I_DEVICE)) {
2007 val64 = readq(&bar0->gpio_control);
2008 val64 |= 0x0000800000000000ULL;
2009 writeq(val64, &bar0->gpio_control);
2010 val64 = 0x0411040400000000ULL;
2011 writeq(val64, (void __iomem *)bar0 + 0x2700);
2017 * s2io_txdl_getskb - Get the skb from txdl, unmap and return skb
2019 static struct sk_buff *s2io_txdl_getskb(struct fifo_info *fifo_data, struct \
2020 TxD *txdlp, int get_off)
2022 struct s2io_nic *nic = fifo_data->nic;
2023 struct sk_buff *skb;
2028 if (txds->Host_Control == (u64)(long)nic->ufo_in_band_v) {
2029 pci_unmap_single(nic->pdev, (dma_addr_t)
2030 txds->Buffer_Pointer, sizeof(u64),
2035 skb = (struct sk_buff *) ((unsigned long)
2036 txds->Host_Control);
2038 memset(txdlp, 0, (sizeof(struct TxD) * fifo_data->max_txds));
2041 pci_unmap_single(nic->pdev, (dma_addr_t)
2042 txds->Buffer_Pointer,
2043 skb->len - skb->data_len,
2045 frg_cnt = skb_shinfo(skb)->nr_frags;
2048 for (j = 0; j < frg_cnt; j++, txds++) {
2049 skb_frag_t *frag = &skb_shinfo(skb)->frags[j];
2050 if (!txds->Buffer_Pointer)
2052 pci_unmap_page(nic->pdev, (dma_addr_t)
2053 txds->Buffer_Pointer,
2054 frag->size, PCI_DMA_TODEVICE);
2057 memset(txdlp,0, (sizeof(struct TxD) * fifo_data->max_txds));
2062 * free_tx_buffers - Free all queued Tx buffers
2063 * @nic : device private variable.
2065 * Free all queued Tx buffers.
2066 * Return Value: void
2069 static void free_tx_buffers(struct s2io_nic *nic)
2071 struct net_device *dev = nic->dev;
2072 struct sk_buff *skb;
2075 struct mac_info *mac_control;
2076 struct config_param *config;
2079 mac_control = &nic->mac_control;
2080 config = &nic->config;
2082 for (i = 0; i < config->tx_fifo_num; i++) {
2083 for (j = 0; j < config->tx_cfg[i].fifo_len - 1; j++) {
2084 txdp = (struct TxD *) mac_control->fifos[i].list_info[j].
2086 skb = s2io_txdl_getskb(&mac_control->fifos[i], txdp, j);
2093 "%s:forcibly freeing %d skbs on FIFO%d\n",
2095 mac_control->fifos[i].tx_curr_get_info.offset = 0;
2096 mac_control->fifos[i].tx_curr_put_info.offset = 0;
2101 * stop_nic - To stop the nic
2102 * @nic ; device private variable.
2104 * This function does exactly the opposite of what the start_nic()
2105 * function does. This function is called to stop the device.
2110 static void stop_nic(struct s2io_nic *nic)
2112 struct XENA_dev_config __iomem *bar0 = nic->bar0;
2113 register u64 val64 = 0;
2115 struct mac_info *mac_control;
2116 struct config_param *config;
2118 mac_control = &nic->mac_control;
2119 config = &nic->config;
2121 /* Disable all interrupts */
2122 interruptible = TX_TRAFFIC_INTR | RX_TRAFFIC_INTR;
2123 interruptible |= TX_PIC_INTR | RX_PIC_INTR;
2124 interruptible |= TX_MAC_INTR | RX_MAC_INTR;
2125 en_dis_able_nic_intrs(nic, interruptible, DISABLE_INTRS);
2127 /* Clearing Adapter_En bit of ADAPTER_CONTROL Register */
2128 val64 = readq(&bar0->adapter_control);
2129 val64 &= ~(ADAPTER_CNTL_EN);
2130 writeq(val64, &bar0->adapter_control);
2133 static int fill_rxd_3buf(struct s2io_nic *nic, struct RxD_t *rxdp, struct \
2136 struct net_device *dev = nic->dev;
2137 struct sk_buff *frag_list;
2140 /* Buffer-1 receives L3/L4 headers */
2141 ((struct RxD3*)rxdp)->Buffer1_ptr = pci_map_single
2142 (nic->pdev, skb->data, l3l4hdr_size + 4,
2143 PCI_DMA_FROMDEVICE);
2145 /* skb_shinfo(skb)->frag_list will have L4 data payload */
2146 skb_shinfo(skb)->frag_list = dev_alloc_skb(dev->mtu + ALIGN_SIZE);
2147 if (skb_shinfo(skb)->frag_list == NULL) {
2148 DBG_PRINT(ERR_DBG, "%s: dev_alloc_skb failed\n ", dev->name);
2151 frag_list = skb_shinfo(skb)->frag_list;
2152 skb->truesize += frag_list->truesize;
2153 frag_list->next = NULL;
2154 tmp = (void *)ALIGN((long)frag_list->data, ALIGN_SIZE + 1);
2155 frag_list->data = tmp;
2156 frag_list->tail = tmp;
2158 /* Buffer-2 receives L4 data payload */
2159 ((struct RxD3*)rxdp)->Buffer2_ptr = pci_map_single(nic->pdev,
2160 frag_list->data, dev->mtu,
2161 PCI_DMA_FROMDEVICE);
2162 rxdp->Control_2 |= SET_BUFFER1_SIZE_3(l3l4hdr_size + 4);
2163 rxdp->Control_2 |= SET_BUFFER2_SIZE_3(dev->mtu);
2169 * fill_rx_buffers - Allocates the Rx side skbs
2170 * @nic: device private variable
2171 * @ring_no: ring number
2173 * The function allocates Rx side skbs and puts the physical
2174 * address of these buffers into the RxD buffer pointers, so that the NIC
2175 * can DMA the received frame into these locations.
2176 * The NIC supports 3 receive modes, viz
2178 * 2. three buffer and
2179 * 3. Five buffer modes.
2180 * Each mode defines how many fragments the received frame will be split
2181 * up into by the NIC. The frame is split into L3 header, L4 Header,
2182 * L4 payload in three buffer mode and in 5 buffer mode, L4 payload itself
2183 * is split into 3 fragments. As of now only single buffer mode is
2186 * SUCCESS on success or an appropriate -ve value on failure.
2189 static int fill_rx_buffers(struct s2io_nic *nic, int ring_no)
2191 struct net_device *dev = nic->dev;
2192 struct sk_buff *skb;
2194 int off, off1, size, block_no, block_no1;
2197 struct mac_info *mac_control;
2198 struct config_param *config;
2201 unsigned long flags;
2202 struct RxD_t *first_rxdp = NULL;
2204 mac_control = &nic->mac_control;
2205 config = &nic->config;
2206 alloc_cnt = mac_control->rings[ring_no].pkt_cnt -
2207 atomic_read(&nic->rx_bufs_left[ring_no]);
2209 block_no1 = mac_control->rings[ring_no].rx_curr_get_info.block_index;
2210 off1 = mac_control->rings[ring_no].rx_curr_get_info.offset;
2211 while (alloc_tab < alloc_cnt) {
2212 block_no = mac_control->rings[ring_no].rx_curr_put_info.
2214 off = mac_control->rings[ring_no].rx_curr_put_info.offset;
2216 rxdp = mac_control->rings[ring_no].
2217 rx_blocks[block_no].rxds[off].virt_addr;
2219 if ((block_no == block_no1) && (off == off1) &&
2220 (rxdp->Host_Control)) {
2221 DBG_PRINT(INTR_DBG, "%s: Get and Put",
2223 DBG_PRINT(INTR_DBG, " info equated\n");
2226 if (off && (off == rxd_count[nic->rxd_mode])) {
2227 mac_control->rings[ring_no].rx_curr_put_info.
2229 if (mac_control->rings[ring_no].rx_curr_put_info.
2230 block_index == mac_control->rings[ring_no].
2232 mac_control->rings[ring_no].rx_curr_put_info.
2234 block_no = mac_control->rings[ring_no].
2235 rx_curr_put_info.block_index;
2236 if (off == rxd_count[nic->rxd_mode])
2238 mac_control->rings[ring_no].rx_curr_put_info.
2240 rxdp = mac_control->rings[ring_no].
2241 rx_blocks[block_no].block_virt_addr;
2242 DBG_PRINT(INTR_DBG, "%s: Next block at: %p\n",
2246 spin_lock_irqsave(&nic->put_lock, flags);
2247 mac_control->rings[ring_no].put_pos =
2248 (block_no * (rxd_count[nic->rxd_mode] + 1)) + off;
2249 spin_unlock_irqrestore(&nic->put_lock, flags);
2251 mac_control->rings[ring_no].put_pos =
2252 (block_no * (rxd_count[nic->rxd_mode] + 1)) + off;
2254 if ((rxdp->Control_1 & RXD_OWN_XENA) &&
2255 ((nic->rxd_mode >= RXD_MODE_3A) &&
2256 (rxdp->Control_2 & BIT(0)))) {
2257 mac_control->rings[ring_no].rx_curr_put_info.
2261 /* calculate size of skb based on ring mode */
2262 size = dev->mtu + HEADER_ETHERNET_II_802_3_SIZE +
2263 HEADER_802_2_SIZE + HEADER_SNAP_SIZE;
2264 if (nic->rxd_mode == RXD_MODE_1)
2265 size += NET_IP_ALIGN;
2266 else if (nic->rxd_mode == RXD_MODE_3B)
2267 size = dev->mtu + ALIGN_SIZE + BUF0_LEN + 4;
2269 size = l3l4hdr_size + ALIGN_SIZE + BUF0_LEN + 4;
2272 skb = dev_alloc_skb(size);
2274 DBG_PRINT(ERR_DBG, "%s: Out of ", dev->name);
2275 DBG_PRINT(ERR_DBG, "memory to allocate SKBs\n");
2278 first_rxdp->Control_1 |= RXD_OWN_XENA;
2282 if (nic->rxd_mode == RXD_MODE_1) {
2283 /* 1 buffer mode - normal operation mode */
2284 memset(rxdp, 0, sizeof(struct RxD1));
2285 skb_reserve(skb, NET_IP_ALIGN);
2286 ((struct RxD1*)rxdp)->Buffer0_ptr = pci_map_single
2287 (nic->pdev, skb->data, size - NET_IP_ALIGN,
2288 PCI_DMA_FROMDEVICE);
2289 rxdp->Control_2 = SET_BUFFER0_SIZE_1(size - NET_IP_ALIGN);
2291 } else if (nic->rxd_mode >= RXD_MODE_3A) {
2293 * 2 or 3 buffer mode -
2294 * Both 2 buffer mode and 3 buffer mode provides 128
2295 * byte aligned receive buffers.
2297 * 3 buffer mode provides header separation where in
2298 * skb->data will have L3/L4 headers where as
2299 * skb_shinfo(skb)->frag_list will have the L4 data
2303 memset(rxdp, 0, sizeof(struct RxD3));
2304 ba = &mac_control->rings[ring_no].ba[block_no][off];
2305 skb_reserve(skb, BUF0_LEN);
2306 tmp = (u64)(unsigned long) skb->data;
2309 skb->data = (void *) (unsigned long)tmp;
2310 skb->tail = (void *) (unsigned long)tmp;
2312 if (!(((struct RxD3*)rxdp)->Buffer0_ptr))
2313 ((struct RxD3*)rxdp)->Buffer0_ptr =
2314 pci_map_single(nic->pdev, ba->ba_0, BUF0_LEN,
2315 PCI_DMA_FROMDEVICE);
2317 pci_dma_sync_single_for_device(nic->pdev,
2318 (dma_addr_t) ((struct RxD3*)rxdp)->Buffer0_ptr,
2319 BUF0_LEN, PCI_DMA_FROMDEVICE);
2320 rxdp->Control_2 = SET_BUFFER0_SIZE_3(BUF0_LEN);
2321 if (nic->rxd_mode == RXD_MODE_3B) {
2322 /* Two buffer mode */
2325 * Buffer2 will have L3/L4 header plus
2328 ((struct RxD3*)rxdp)->Buffer2_ptr = pci_map_single
2329 (nic->pdev, skb->data, dev->mtu + 4,
2330 PCI_DMA_FROMDEVICE);
2332 /* Buffer-1 will be dummy buffer. Not used */
2333 if (!(((struct RxD3*)rxdp)->Buffer1_ptr)) {
2334 ((struct RxD3*)rxdp)->Buffer1_ptr =
2335 pci_map_single(nic->pdev,
2337 PCI_DMA_FROMDEVICE);
2339 rxdp->Control_2 |= SET_BUFFER1_SIZE_3(1);
2340 rxdp->Control_2 |= SET_BUFFER2_SIZE_3
2344 if (fill_rxd_3buf(nic, rxdp, skb) == -ENOMEM) {
2345 dev_kfree_skb_irq(skb);
2348 first_rxdp->Control_1 |=
2354 rxdp->Control_2 |= BIT(0);
2356 rxdp->Host_Control = (unsigned long) (skb);
2357 if (alloc_tab & ((1 << rxsync_frequency) - 1))
2358 rxdp->Control_1 |= RXD_OWN_XENA;
2360 if (off == (rxd_count[nic->rxd_mode] + 1))
2362 mac_control->rings[ring_no].rx_curr_put_info.offset = off;
2364 rxdp->Control_2 |= SET_RXD_MARKER;
2365 if (!(alloc_tab & ((1 << rxsync_frequency) - 1))) {
2368 first_rxdp->Control_1 |= RXD_OWN_XENA;
2372 atomic_inc(&nic->rx_bufs_left[ring_no]);
2377 /* Transfer ownership of first descriptor to adapter just before
2378 * exiting. Before that, use memory barrier so that ownership
2379 * and other fields are seen by adapter correctly.
2383 first_rxdp->Control_1 |= RXD_OWN_XENA;
2389 static void free_rxd_blk(struct s2io_nic *sp, int ring_no, int blk)
2391 struct net_device *dev = sp->dev;
2393 struct sk_buff *skb;
2395 struct mac_info *mac_control;
2398 mac_control = &sp->mac_control;
2399 for (j = 0 ; j < rxd_count[sp->rxd_mode]; j++) {
2400 rxdp = mac_control->rings[ring_no].
2401 rx_blocks[blk].rxds[j].virt_addr;
2402 skb = (struct sk_buff *)
2403 ((unsigned long) rxdp->Host_Control);
2407 if (sp->rxd_mode == RXD_MODE_1) {
2408 pci_unmap_single(sp->pdev, (dma_addr_t)
2409 ((struct RxD1*)rxdp)->Buffer0_ptr,
2411 HEADER_ETHERNET_II_802_3_SIZE
2412 + HEADER_802_2_SIZE +
2414 PCI_DMA_FROMDEVICE);
2415 memset(rxdp, 0, sizeof(struct RxD1));
2416 } else if(sp->rxd_mode == RXD_MODE_3B) {
2417 ba = &mac_control->rings[ring_no].
2419 pci_unmap_single(sp->pdev, (dma_addr_t)
2420 ((struct RxD3*)rxdp)->Buffer0_ptr,
2422 PCI_DMA_FROMDEVICE);
2423 pci_unmap_single(sp->pdev, (dma_addr_t)
2424 ((struct RxD3*)rxdp)->Buffer1_ptr,
2426 PCI_DMA_FROMDEVICE);
2427 pci_unmap_single(sp->pdev, (dma_addr_t)
2428 ((struct RxD3*)rxdp)->Buffer2_ptr,
2430 PCI_DMA_FROMDEVICE);
2431 memset(rxdp, 0, sizeof(struct RxD3));
2433 pci_unmap_single(sp->pdev, (dma_addr_t)
2434 ((struct RxD3*)rxdp)->Buffer0_ptr, BUF0_LEN,
2435 PCI_DMA_FROMDEVICE);
2436 pci_unmap_single(sp->pdev, (dma_addr_t)
2437 ((struct RxD3*)rxdp)->Buffer1_ptr,
2439 PCI_DMA_FROMDEVICE);
2440 pci_unmap_single(sp->pdev, (dma_addr_t)
2441 ((struct RxD3*)rxdp)->Buffer2_ptr, dev->mtu,
2442 PCI_DMA_FROMDEVICE);
2443 memset(rxdp, 0, sizeof(struct RxD3));
2446 atomic_dec(&sp->rx_bufs_left[ring_no]);
2451 * free_rx_buffers - Frees all Rx buffers
2452 * @sp: device private variable.
2454 * This function will free all Rx buffers allocated by host.
2459 static void free_rx_buffers(struct s2io_nic *sp)
2461 struct net_device *dev = sp->dev;
2462 int i, blk = 0, buf_cnt = 0;
2463 struct mac_info *mac_control;
2464 struct config_param *config;
2466 mac_control = &sp->mac_control;
2467 config = &sp->config;
2469 for (i = 0; i < config->rx_ring_num; i++) {
2470 for (blk = 0; blk < rx_ring_sz[i]; blk++)
2471 free_rxd_blk(sp,i,blk);
2473 mac_control->rings[i].rx_curr_put_info.block_index = 0;
2474 mac_control->rings[i].rx_curr_get_info.block_index = 0;
2475 mac_control->rings[i].rx_curr_put_info.offset = 0;
2476 mac_control->rings[i].rx_curr_get_info.offset = 0;
2477 atomic_set(&sp->rx_bufs_left[i], 0);
2478 DBG_PRINT(INIT_DBG, "%s:Freed 0x%x Rx Buffers on ring%d\n",
2479 dev->name, buf_cnt, i);
2484 * s2io_poll - Rx interrupt handler for NAPI support
2485 * @dev : pointer to the device structure.
2486 * @budget : The number of packets that were budgeted to be processed
2487 * during one pass through the 'Poll" function.
2489 * Comes into picture only if NAPI support has been incorporated. It does
2490 * the same thing that rx_intr_handler does, but not in a interrupt context
2491 * also It will process only a given number of packets.
2493 * 0 on success and 1 if there are No Rx packets to be processed.
2496 static int s2io_poll(struct net_device *dev, int *budget)
2498 struct s2io_nic *nic = dev->priv;
2499 int pkt_cnt = 0, org_pkts_to_process;
2500 struct mac_info *mac_control;
2501 struct config_param *config;
2502 struct XENA_dev_config __iomem *bar0 = nic->bar0;
2505 atomic_inc(&nic->isr_cnt);
2506 mac_control = &nic->mac_control;
2507 config = &nic->config;
2509 nic->pkts_to_process = *budget;
2510 if (nic->pkts_to_process > dev->quota)
2511 nic->pkts_to_process = dev->quota;
2512 org_pkts_to_process = nic->pkts_to_process;
2514 writeq(S2IO_MINUS_ONE, &bar0->rx_traffic_int);
2515 readl(&bar0->rx_traffic_int);
2517 for (i = 0; i < config->rx_ring_num; i++) {
2518 rx_intr_handler(&mac_control->rings[i]);
2519 pkt_cnt = org_pkts_to_process - nic->pkts_to_process;
2520 if (!nic->pkts_to_process) {
2521 /* Quota for the current iteration has been met */
2528 dev->quota -= pkt_cnt;
2530 netif_rx_complete(dev);
2532 for (i = 0; i < config->rx_ring_num; i++) {
2533 if (fill_rx_buffers(nic, i) == -ENOMEM) {
2534 DBG_PRINT(ERR_DBG, "%s:Out of memory", dev->name);
2535 DBG_PRINT(ERR_DBG, " in Rx Poll!!\n");
2539 /* Re enable the Rx interrupts. */
2540 writeq(0x0, &bar0->rx_traffic_mask);
2541 readl(&bar0->rx_traffic_mask);
2542 atomic_dec(&nic->isr_cnt);
2546 dev->quota -= pkt_cnt;
2549 for (i = 0; i < config->rx_ring_num; i++) {
2550 if (fill_rx_buffers(nic, i) == -ENOMEM) {
2551 DBG_PRINT(ERR_DBG, "%s:Out of memory", dev->name);
2552 DBG_PRINT(ERR_DBG, " in Rx Poll!!\n");
2556 atomic_dec(&nic->isr_cnt);
2560 #ifdef CONFIG_NET_POLL_CONTROLLER
2562 * s2io_netpoll - netpoll event handler entry point
2563 * @dev : pointer to the device structure.
2565 * This function will be called by upper layer to check for events on the
2566 * interface in situations where interrupts are disabled. It is used for
2567 * specific in-kernel networking tasks, such as remote consoles and kernel
2568 * debugging over the network (example netdump in RedHat).
2570 static void s2io_netpoll(struct net_device *dev)
2572 struct s2io_nic *nic = dev->priv;
2573 struct mac_info *mac_control;
2574 struct config_param *config;
2575 struct XENA_dev_config __iomem *bar0 = nic->bar0;
2576 u64 val64 = 0xFFFFFFFFFFFFFFFFULL;
2579 disable_irq(dev->irq);
2581 atomic_inc(&nic->isr_cnt);
2582 mac_control = &nic->mac_control;
2583 config = &nic->config;
2585 writeq(val64, &bar0->rx_traffic_int);
2586 writeq(val64, &bar0->tx_traffic_int);
2588 /* we need to free up the transmitted skbufs or else netpoll will
2589 * run out of skbs and will fail and eventually netpoll application such
2590 * as netdump will fail.
2592 for (i = 0; i < config->tx_fifo_num; i++)
2593 tx_intr_handler(&mac_control->fifos[i]);
2595 /* check for received packet and indicate up to network */
2596 for (i = 0; i < config->rx_ring_num; i++)
2597 rx_intr_handler(&mac_control->rings[i]);
2599 for (i = 0; i < config->rx_ring_num; i++) {
2600 if (fill_rx_buffers(nic, i) == -ENOMEM) {
2601 DBG_PRINT(ERR_DBG, "%s:Out of memory", dev->name);
2602 DBG_PRINT(ERR_DBG, " in Rx Netpoll!!\n");
2606 atomic_dec(&nic->isr_cnt);
2607 enable_irq(dev->irq);
2613 * rx_intr_handler - Rx interrupt handler
2614 * @nic: device private variable.
2616 * If the interrupt is because of a received frame or if the
2617 * receive ring contains fresh as yet un-processed frames,this function is
2618 * called. It picks out the RxD at which place the last Rx processing had
2619 * stopped and sends the skb to the OSM's Rx handler and then increments
2624 static void rx_intr_handler(struct ring_info *ring_data)
2626 struct s2io_nic *nic = ring_data->nic;
2627 struct net_device *dev = (struct net_device *) nic->dev;
2628 int get_block, put_block, put_offset;
2629 struct rx_curr_get_info get_info, put_info;
2631 struct sk_buff *skb;
2635 spin_lock(&nic->rx_lock);
2636 if (atomic_read(&nic->card_state) == CARD_DOWN) {
2637 DBG_PRINT(INTR_DBG, "%s: %s going down for reset\n",
2638 __FUNCTION__, dev->name);
2639 spin_unlock(&nic->rx_lock);
2643 get_info = ring_data->rx_curr_get_info;
2644 get_block = get_info.block_index;
2645 memcpy(&put_info, &ring_data->rx_curr_put_info, sizeof(put_info));
2646 put_block = put_info.block_index;
2647 rxdp = ring_data->rx_blocks[get_block].rxds[get_info.offset].virt_addr;
2649 spin_lock(&nic->put_lock);
2650 put_offset = ring_data->put_pos;
2651 spin_unlock(&nic->put_lock);
2653 put_offset = ring_data->put_pos;
2655 while (RXD_IS_UP2DT(rxdp)) {
2657 * If your are next to put index then it's
2658 * FIFO full condition
2660 if ((get_block == put_block) &&
2661 (get_info.offset + 1) == put_info.offset) {
2662 DBG_PRINT(INTR_DBG, "%s: Ring Full\n",dev->name);
2665 skb = (struct sk_buff *) ((unsigned long)rxdp->Host_Control);
2667 DBG_PRINT(ERR_DBG, "%s: The skb is ",
2669 DBG_PRINT(ERR_DBG, "Null in Rx Intr\n");
2670 spin_unlock(&nic->rx_lock);
2673 if (nic->rxd_mode == RXD_MODE_1) {
2674 pci_unmap_single(nic->pdev, (dma_addr_t)
2675 ((struct RxD1*)rxdp)->Buffer0_ptr,
2677 HEADER_ETHERNET_II_802_3_SIZE +
2680 PCI_DMA_FROMDEVICE);
2681 } else if (nic->rxd_mode == RXD_MODE_3B) {
2682 pci_dma_sync_single_for_cpu(nic->pdev, (dma_addr_t)
2683 ((struct RxD3*)rxdp)->Buffer0_ptr,
2684 BUF0_LEN, PCI_DMA_FROMDEVICE);
2685 pci_unmap_single(nic->pdev, (dma_addr_t)
2686 ((struct RxD3*)rxdp)->Buffer2_ptr,
2688 PCI_DMA_FROMDEVICE);
2690 pci_dma_sync_single_for_cpu(nic->pdev, (dma_addr_t)
2691 ((struct RxD3*)rxdp)->Buffer0_ptr, BUF0_LEN,
2692 PCI_DMA_FROMDEVICE);
2693 pci_unmap_single(nic->pdev, (dma_addr_t)
2694 ((struct RxD3*)rxdp)->Buffer1_ptr,
2696 PCI_DMA_FROMDEVICE);
2697 pci_unmap_single(nic->pdev, (dma_addr_t)
2698 ((struct RxD3*)rxdp)->Buffer2_ptr,
2699 dev->mtu, PCI_DMA_FROMDEVICE);
2701 prefetch(skb->data);
2702 rx_osm_handler(ring_data, rxdp);
2704 ring_data->rx_curr_get_info.offset = get_info.offset;
2705 rxdp = ring_data->rx_blocks[get_block].
2706 rxds[get_info.offset].virt_addr;
2707 if (get_info.offset == rxd_count[nic->rxd_mode]) {
2708 get_info.offset = 0;
2709 ring_data->rx_curr_get_info.offset = get_info.offset;
2711 if (get_block == ring_data->block_count)
2713 ring_data->rx_curr_get_info.block_index = get_block;
2714 rxdp = ring_data->rx_blocks[get_block].block_virt_addr;
2717 nic->pkts_to_process -= 1;
2718 if ((napi) && (!nic->pkts_to_process))
2721 if ((indicate_max_pkts) && (pkt_cnt > indicate_max_pkts))
2725 /* Clear all LRO sessions before exiting */
2726 for (i=0; i<MAX_LRO_SESSIONS; i++) {
2727 struct lro *lro = &nic->lro0_n[i];
2729 update_L3L4_header(nic, lro);
2730 queue_rx_frame(lro->parent);
2731 clear_lro_session(lro);
2736 spin_unlock(&nic->rx_lock);
2740 * tx_intr_handler - Transmit interrupt handler
2741 * @nic : device private variable
2743 * If an interrupt was raised to indicate DMA complete of the
2744 * Tx packet, this function is called. It identifies the last TxD
2745 * whose buffer was freed and frees all skbs whose data have already
2746 * DMA'ed into the NICs internal memory.
2751 static void tx_intr_handler(struct fifo_info *fifo_data)
2753 struct s2io_nic *nic = fifo_data->nic;
2754 struct net_device *dev = (struct net_device *) nic->dev;
2755 struct tx_curr_get_info get_info, put_info;
2756 struct sk_buff *skb;
2759 get_info = fifo_data->tx_curr_get_info;
2760 memcpy(&put_info, &fifo_data->tx_curr_put_info, sizeof(put_info));
2761 txdlp = (struct TxD *) fifo_data->list_info[get_info.offset].
2763 while ((!(txdlp->Control_1 & TXD_LIST_OWN_XENA)) &&
2764 (get_info.offset != put_info.offset) &&
2765 (txdlp->Host_Control)) {
2766 /* Check for TxD errors */
2767 if (txdlp->Control_1 & TXD_T_CODE) {
2768 unsigned long long err;
2769 err = txdlp->Control_1 & TXD_T_CODE;
2771 nic->mac_control.stats_info->sw_stat.
2774 if ((err >> 48) == 0xA) {
2775 DBG_PRINT(TX_DBG, "TxD returned due \
2776 to loss of link\n");
2779 DBG_PRINT(ERR_DBG, "***TxD error %llx\n", err);
2783 skb = s2io_txdl_getskb(fifo_data, txdlp, get_info.offset);
2785 DBG_PRINT(ERR_DBG, "%s: Null skb ",
2787 DBG_PRINT(ERR_DBG, "in Tx Free Intr\n");
2791 /* Updating the statistics block */
2792 nic->stats.tx_bytes += skb->len;
2793 dev_kfree_skb_irq(skb);
2796 if (get_info.offset == get_info.fifo_len + 1)
2797 get_info.offset = 0;
2798 txdlp = (struct TxD *) fifo_data->list_info
2799 [get_info.offset].list_virt_addr;
2800 fifo_data->tx_curr_get_info.offset =
2804 spin_lock(&nic->tx_lock);
2805 if (netif_queue_stopped(dev))
2806 netif_wake_queue(dev);
2807 spin_unlock(&nic->tx_lock);
2811 * s2io_mdio_write - Function to write in to MDIO registers
2812 * @mmd_type : MMD type value (PMA/PMD/WIS/PCS/PHYXS)
2813 * @addr : address value
2814 * @value : data value
2815 * @dev : pointer to net_device structure
2817 * This function is used to write values to the MDIO registers
2820 static void s2io_mdio_write(u32 mmd_type, u64 addr, u16 value, struct net_device *dev)
2823 struct s2io_nic *sp = dev->priv;
2824 struct XENA_dev_config __iomem *bar0 = sp->bar0;
2826 //address transaction
2827 val64 = val64 | MDIO_MMD_INDX_ADDR(addr)
2828 | MDIO_MMD_DEV_ADDR(mmd_type)
2829 | MDIO_MMS_PRT_ADDR(0x0);
2830 writeq(val64, &bar0->mdio_control);
2831 val64 = val64 | MDIO_CTRL_START_TRANS(0xE);
2832 writeq(val64, &bar0->mdio_control);
2837 val64 = val64 | MDIO_MMD_INDX_ADDR(addr)
2838 | MDIO_MMD_DEV_ADDR(mmd_type)
2839 | MDIO_MMS_PRT_ADDR(0x0)
2840 | MDIO_MDIO_DATA(value)
2841 | MDIO_OP(MDIO_OP_WRITE_TRANS);
2842 writeq(val64, &bar0->mdio_control);
2843 val64 = val64 | MDIO_CTRL_START_TRANS(0xE);
2844 writeq(val64, &bar0->mdio_control);
2848 val64 = val64 | MDIO_MMD_INDX_ADDR(addr)
2849 | MDIO_MMD_DEV_ADDR(mmd_type)
2850 | MDIO_MMS_PRT_ADDR(0x0)
2851 | MDIO_OP(MDIO_OP_READ_TRANS);
2852 writeq(val64, &bar0->mdio_control);
2853 val64 = val64 | MDIO_CTRL_START_TRANS(0xE);
2854 writeq(val64, &bar0->mdio_control);
2860 * s2io_mdio_read - Function to write in to MDIO registers
2861 * @mmd_type : MMD type value (PMA/PMD/WIS/PCS/PHYXS)
2862 * @addr : address value
2863 * @dev : pointer to net_device structure
2865 * This function is used to read values to the MDIO registers
2868 static u64 s2io_mdio_read(u32 mmd_type, u64 addr, struct net_device *dev)
2872 struct s2io_nic *sp = dev->priv;
2873 struct XENA_dev_config __iomem *bar0 = sp->bar0;
2875 /* address transaction */
2876 val64 = val64 | MDIO_MMD_INDX_ADDR(addr)
2877 | MDIO_MMD_DEV_ADDR(mmd_type)
2878 | MDIO_MMS_PRT_ADDR(0x0);
2879 writeq(val64, &bar0->mdio_control);
2880 val64 = val64 | MDIO_CTRL_START_TRANS(0xE);
2881 writeq(val64, &bar0->mdio_control);
2884 /* Data transaction */
2886 val64 = val64 | MDIO_MMD_INDX_ADDR(addr)
2887 | MDIO_MMD_DEV_ADDR(mmd_type)
2888 | MDIO_MMS_PRT_ADDR(0x0)
2889 | MDIO_OP(MDIO_OP_READ_TRANS);
2890 writeq(val64, &bar0->mdio_control);
2891 val64 = val64 | MDIO_CTRL_START_TRANS(0xE);
2892 writeq(val64, &bar0->mdio_control);
2895 /* Read the value from regs */
2896 rval64 = readq(&bar0->mdio_control);
2897 rval64 = rval64 & 0xFFFF0000;
2898 rval64 = rval64 >> 16;
2902 * s2io_chk_xpak_counter - Function to check the status of the xpak counters
2903 * @counter : couter value to be updated
2904 * @flag : flag to indicate the status
2905 * @type : counter type
2907 * This function is to check the status of the xpak counters value
2911 static void s2io_chk_xpak_counter(u64 *counter, u64 * regs_stat, u32 index, u16 flag, u16 type)
2916 for(i = 0; i <index; i++)
2921 *counter = *counter + 1;
2922 val64 = *regs_stat & mask;
2923 val64 = val64 >> (index * 0x2);
2930 DBG_PRINT(ERR_DBG, "Take Xframe NIC out of "
2931 "service. Excessive temperatures may "
2932 "result in premature transceiver "
2936 DBG_PRINT(ERR_DBG, "Take Xframe NIC out of "
2937 "service Excessive bias currents may "
2938 "indicate imminent laser diode "
2942 DBG_PRINT(ERR_DBG, "Take Xframe NIC out of "
2943 "service Excessive laser output "
2944 "power may saturate far-end "
2948 DBG_PRINT(ERR_DBG, "Incorrect XPAK Alarm "
2953 val64 = val64 << (index * 0x2);
2954 *regs_stat = (*regs_stat & (~mask)) | (val64);
2957 *regs_stat = *regs_stat & (~mask);
2962 * s2io_updt_xpak_counter - Function to update the xpak counters
2963 * @dev : pointer to net_device struct
2965 * This function is to upate the status of the xpak counters value
2968 static void s2io_updt_xpak_counter(struct net_device *dev)
2976 struct s2io_nic *sp = dev->priv;
2977 struct stat_block *stat_info = sp->mac_control.stats_info;
2979 /* Check the communication with the MDIO slave */
2982 val64 = s2io_mdio_read(MDIO_MMD_PMA_DEV_ADDR, addr, dev);
2983 if((val64 == 0xFFFF) || (val64 == 0x0000))
2985 DBG_PRINT(ERR_DBG, "ERR: MDIO slave access failed - "
2986 "Returned %llx\n", (unsigned long long)val64);
2990 /* Check for the expecte value of 2040 at PMA address 0x0000 */
2993 DBG_PRINT(ERR_DBG, "Incorrect value at PMA address 0x0000 - ");
2994 DBG_PRINT(ERR_DBG, "Returned: %llx- Expected: 0x2040\n",
2995 (unsigned long long)val64);
2999 /* Loading the DOM register to MDIO register */
3001 s2io_mdio_write(MDIO_MMD_PMA_DEV_ADDR, addr, val16, dev);
3002 val64 = s2io_mdio_read(MDIO_MMD_PMA_DEV_ADDR, addr, dev);
3004 /* Reading the Alarm flags */
3007 val64 = s2io_mdio_read(MDIO_MMD_PMA_DEV_ADDR, addr, dev);
3009 flag = CHECKBIT(val64, 0x7);
3011 s2io_chk_xpak_counter(&stat_info->xpak_stat.alarm_transceiver_temp_high,
3012 &stat_info->xpak_stat.xpak_regs_stat,
3015 if(CHECKBIT(val64, 0x6))
3016 stat_info->xpak_stat.alarm_transceiver_temp_low++;
3018 flag = CHECKBIT(val64, 0x3);
3020 s2io_chk_xpak_counter(&stat_info->xpak_stat.alarm_laser_bias_current_high,
3021 &stat_info->xpak_stat.xpak_regs_stat,
3024 if(CHECKBIT(val64, 0x2))
3025 stat_info->xpak_stat.alarm_laser_bias_current_low++;
3027 flag = CHECKBIT(val64, 0x1);
3029 s2io_chk_xpak_counter(&stat_info->xpak_stat.alarm_laser_output_power_high,
3030 &stat_info->xpak_stat.xpak_regs_stat,
3033 if(CHECKBIT(val64, 0x0))
3034 stat_info->xpak_stat.alarm_laser_output_power_low++;
3036 /* Reading the Warning flags */
3039 val64 = s2io_mdio_read(MDIO_MMD_PMA_DEV_ADDR, addr, dev);
3041 if(CHECKBIT(val64, 0x7))
3042 stat_info->xpak_stat.warn_transceiver_temp_high++;
3044 if(CHECKBIT(val64, 0x6))
3045 stat_info->xpak_stat.warn_transceiver_temp_low++;
3047 if(CHECKBIT(val64, 0x3))
3048 stat_info->xpak_stat.warn_laser_bias_current_high++;
3050 if(CHECKBIT(val64, 0x2))
3051 stat_info->xpak_stat.warn_laser_bias_current_low++;
3053 if(CHECKBIT(val64, 0x1))
3054 stat_info->xpak_stat.warn_laser_output_power_high++;
3056 if(CHECKBIT(val64, 0x0))
3057 stat_info->xpak_stat.warn_laser_output_power_low++;
3061 * alarm_intr_handler - Alarm Interrrupt handler
3062 * @nic: device private variable
3063 * Description: If the interrupt was neither because of Rx packet or Tx
3064 * complete, this function is called. If the interrupt was to indicate
3065 * a loss of link, the OSM link status handler is invoked for any other
3066 * alarm interrupt the block that raised the interrupt is displayed
3067 * and a H/W reset is issued.
3072 static void alarm_intr_handler(struct s2io_nic *nic)
3074 struct net_device *dev = (struct net_device *) nic->dev;
3075 struct XENA_dev_config __iomem *bar0 = nic->bar0;
3076 register u64 val64 = 0, err_reg = 0;
3079 if (atomic_read(&nic->card_state) == CARD_DOWN)
3081 nic->mac_control.stats_info->sw_stat.ring_full_cnt = 0;
3082 /* Handling the XPAK counters update */
3083 if(nic->mac_control.stats_info->xpak_stat.xpak_timer_count < 72000) {
3084 /* waiting for an hour */
3085 nic->mac_control.stats_info->xpak_stat.xpak_timer_count++;
3087 s2io_updt_xpak_counter(dev);
3088 /* reset the count to zero */
3089 nic->mac_control.stats_info->xpak_stat.xpak_timer_count = 0;
3092 /* Handling link status change error Intr */
3093 if (s2io_link_fault_indication(nic) == MAC_RMAC_ERR_TIMER) {
3094 err_reg = readq(&bar0->mac_rmac_err_reg);
3095 writeq(err_reg, &bar0->mac_rmac_err_reg);
3096 if (err_reg & RMAC_LINK_STATE_CHANGE_INT) {
3097 schedule_work(&nic->set_link_task);
3101 /* Handling Ecc errors */
3102 val64 = readq(&bar0->mc_err_reg);
3103 writeq(val64, &bar0->mc_err_reg);
3104 if (val64 & (MC_ERR_REG_ECC_ALL_SNG | MC_ERR_REG_ECC_ALL_DBL)) {
3105 if (val64 & MC_ERR_REG_ECC_ALL_DBL) {
3106 nic->mac_control.stats_info->sw_stat.
3108 DBG_PRINT(INIT_DBG, "%s: Device indicates ",
3110 DBG_PRINT(INIT_DBG, "double ECC error!!\n");
3111 if (nic->device_type != XFRAME_II_DEVICE) {
3112 /* Reset XframeI only if critical error */
3113 if (val64 & (MC_ERR_REG_MIRI_ECC_DB_ERR_0 |
3114 MC_ERR_REG_MIRI_ECC_DB_ERR_1)) {
3115 netif_stop_queue(dev);
3116 schedule_work(&nic->rst_timer_task);
3117 nic->mac_control.stats_info->sw_stat.
3122 nic->mac_control.stats_info->sw_stat.
3127 /* In case of a serious error, the device will be Reset. */
3128 val64 = readq(&bar0->serr_source);
3129 if (val64 & SERR_SOURCE_ANY) {
3130 nic->mac_control.stats_info->sw_stat.serious_err_cnt++;
3131 DBG_PRINT(ERR_DBG, "%s: Device indicates ", dev->name);
3132 DBG_PRINT(ERR_DBG, "serious error %llx!!\n",
3133 (unsigned long long)val64);
3134 netif_stop_queue(dev);
3135 schedule_work(&nic->rst_timer_task);
3136 nic->mac_control.stats_info->sw_stat.soft_reset_cnt++;
3140 * Also as mentioned in the latest Errata sheets if the PCC_FB_ECC
3141 * Error occurs, the adapter will be recycled by disabling the
3142 * adapter enable bit and enabling it again after the device
3143 * becomes Quiescent.
3145 val64 = readq(&bar0->pcc_err_reg);
3146 writeq(val64, &bar0->pcc_err_reg);
3147 if (val64 & PCC_FB_ECC_DB_ERR) {
3148 u64 ac = readq(&bar0->adapter_control);
3149 ac &= ~(ADAPTER_CNTL_EN);
3150 writeq(ac, &bar0->adapter_control);
3151 ac = readq(&bar0->adapter_control);
3152 schedule_work(&nic->set_link_task);
3154 /* Check for data parity error */
3155 val64 = readq(&bar0->pic_int_status);
3156 if (val64 & PIC_INT_GPIO) {
3157 val64 = readq(&bar0->gpio_int_reg);
3158 if (val64 & GPIO_INT_REG_DP_ERR_INT) {
3159 nic->mac_control.stats_info->sw_stat.parity_err_cnt++;
3160 schedule_work(&nic->rst_timer_task);
3161 nic->mac_control.stats_info->sw_stat.soft_reset_cnt++;
3165 /* Check for ring full counter */
3166 if (nic->device_type & XFRAME_II_DEVICE) {
3167 val64 = readq(&bar0->ring_bump_counter1);
3168 for (i=0; i<4; i++) {
3169 cnt = ( val64 & vBIT(0xFFFF,(i*16),16));
3170 cnt >>= 64 - ((i+1)*16);
3171 nic->mac_control.stats_info->sw_stat.ring_full_cnt
3175 val64 = readq(&bar0->ring_bump_counter2);
3176 for (i=0; i<4; i++) {
3177 cnt = ( val64 & vBIT(0xFFFF,(i*16),16));
3178 cnt >>= 64 - ((i+1)*16);
3179 nic->mac_control.stats_info->sw_stat.ring_full_cnt
3184 /* Other type of interrupts are not being handled now, TODO */
3188 * wait_for_cmd_complete - waits for a command to complete.
3189 * @sp : private member of the device structure, which is a pointer to the
3190 * s2io_nic structure.
3191 * Description: Function that waits for a command to Write into RMAC
3192 * ADDR DATA registers to be completed and returns either success or
3193 * error depending on whether the command was complete or not.
3195 * SUCCESS on success and FAILURE on failure.
3198 static int wait_for_cmd_complete(void __iomem *addr, u64 busy_bit)
3200 int ret = FAILURE, cnt = 0;
3204 val64 = readq(addr);
3205 if (!(val64 & busy_bit)) {
3221 * check_pci_device_id - Checks if the device id is supported
3223 * Description: Function to check if the pci device id is supported by driver.
3224 * Return value: Actual device id if supported else PCI_ANY_ID
3226 static u16 check_pci_device_id(u16 id)
3229 case PCI_DEVICE_ID_HERC_WIN:
3230 case PCI_DEVICE_ID_HERC_UNI:
3231 return XFRAME_II_DEVICE;
3232 case PCI_DEVICE_ID_S2IO_UNI:
3233 case PCI_DEVICE_ID_S2IO_WIN:
3234 return XFRAME_I_DEVICE;
3241 * s2io_reset - Resets the card.
3242 * @sp : private member of the device structure.
3243 * Description: Function to Reset the card. This function then also
3244 * restores the previously saved PCI configuration space registers as
3245 * the card reset also resets the configuration space.
3250 static void s2io_reset(struct s2io_nic * sp)
3252 struct XENA_dev_config __iomem *bar0 = sp->bar0;
3257 DBG_PRINT(INIT_DBG,"%s - Resetting XFrame card %s\n",
3258 __FUNCTION__, sp->dev->name);
3260 /* Back up the PCI-X CMD reg, dont want to lose MMRBC, OST settings */
3261 pci_read_config_word(sp->pdev, PCIX_COMMAND_REGISTER, &(pci_cmd));
3263 if (sp->device_type == XFRAME_II_DEVICE) {
3265 ret = pci_set_power_state(sp->pdev, 3);
3267 ret = pci_set_power_state(sp->pdev, 0);
3269 DBG_PRINT(ERR_DBG,"%s PME based SW_Reset failed!\n",
3277 val64 = SW_RESET_ALL;
3278 writeq(val64, &bar0->sw_reset);
3280 if (strstr(sp->product_name, "CX4")) {
3284 for (i = 0; i < S2IO_MAX_PCI_CONFIG_SPACE_REINIT; i++) {
3286 /* Restore the PCI state saved during initialization. */
3287 pci_restore_state(sp->pdev);
3288 pci_read_config_word(sp->pdev, 0x2, &val16);
3289 if (check_pci_device_id(val16) != (u16)PCI_ANY_ID)
3294 if (check_pci_device_id(val16) == (u16)PCI_ANY_ID) {
3295 DBG_PRINT(ERR_DBG,"%s SW_Reset failed!\n", __FUNCTION__);
3298 pci_write_config_word(sp->pdev, PCIX_COMMAND_REGISTER, pci_cmd);
3302 /* Set swapper to enable I/O register access */
3303 s2io_set_swapper(sp);
3305 /* Restore the MSIX table entries from local variables */
3306 restore_xmsi_data(sp);
3308 /* Clear certain PCI/PCI-X fields after reset */
3309 if (sp->device_type == XFRAME_II_DEVICE) {
3310 /* Clear "detected parity error" bit */
3311 pci_write_config_word(sp->pdev, PCI_STATUS, 0x8000);
3313 /* Clearing PCIX Ecc status register */
3314 pci_write_config_dword(sp->pdev, 0x68, 0x7C);
3316 /* Clearing PCI_STATUS error reflected here */
3317 writeq(BIT(62), &bar0->txpic_int_reg);
3320 /* Reset device statistics maintained by OS */
3321 memset(&sp->stats, 0, sizeof (struct net_device_stats));
3323 /* SXE-002: Configure link and activity LED to turn it off */
3324 subid = sp->pdev->subsystem_device;
3325 if (((subid & 0xFF) >= 0x07) &&
3326 (sp->device_type == XFRAME_I_DEVICE)) {
3327 val64 = readq(&bar0->gpio_control);
3328 val64 |= 0x0000800000000000ULL;
3329 writeq(val64, &bar0->gpio_control);
3330 val64 = 0x0411040400000000ULL;
3331 writeq(val64, (void __iomem *)bar0 + 0x2700);
3335 * Clear spurious ECC interrupts that would have occured on
3336 * XFRAME II cards after reset.
3338 if (sp->device_type == XFRAME_II_DEVICE) {
3339 val64 = readq(&bar0->pcc_err_reg);
3340 writeq(val64, &bar0->pcc_err_reg);
3343 sp->device_enabled_once = FALSE;
3347 * s2io_set_swapper - to set the swapper controle on the card
3348 * @sp : private member of the device structure,
3349 * pointer to the s2io_nic structure.
3350 * Description: Function to set the swapper control on the card
3351 * correctly depending on the 'endianness' of the system.
3353 * SUCCESS on success and FAILURE on failure.
3356 static int s2io_set_swapper(struct s2io_nic * sp)
3358 struct net_device *dev = sp->dev;
3359 struct XENA_dev_config __iomem *bar0 = sp->bar0;
3360 u64 val64, valt, valr;
3363 * Set proper endian settings and verify the same by reading
3364 * the PIF Feed-back register.
3367 val64 = readq(&bar0->pif_rd_swapper_fb);
3368 if (val64 != 0x0123456789ABCDEFULL) {
3370 u64 value[] = { 0xC30000C3C30000C3ULL, /* FE=1, SE=1 */
3371 0x8100008181000081ULL, /* FE=1, SE=0 */
3372 0x4200004242000042ULL, /* FE=0, SE=1 */
3373 0}; /* FE=0, SE=0 */
3376 writeq(value[i], &bar0->swapper_ctrl);
3377 val64 = readq(&bar0->pif_rd_swapper_fb);
3378 if (val64 == 0x0123456789ABCDEFULL)
3383 DBG_PRINT(ERR_DBG, "%s: Endian settings are wrong, ",
3385 DBG_PRINT(ERR_DBG, "feedback read %llx\n",
3386 (unsigned long long) val64);
3391 valr = readq(&bar0->swapper_ctrl);
3394 valt = 0x0123456789ABCDEFULL;
3395 writeq(valt, &bar0->xmsi_address);
3396 val64 = readq(&bar0->xmsi_address);
3400 u64 value[] = { 0x00C3C30000C3C300ULL, /* FE=1, SE=1 */
3401 0x0081810000818100ULL, /* FE=1, SE=0 */
3402 0x0042420000424200ULL, /* FE=0, SE=1 */
3403 0}; /* FE=0, SE=0 */
3406 writeq((value[i] | valr), &bar0->swapper_ctrl);
3407 writeq(valt, &bar0->xmsi_address);
3408 val64 = readq(&bar0->xmsi_address);
3414 unsigned long long x = val64;
3415 DBG_PRINT(ERR_DBG, "Write failed, Xmsi_addr ");
3416 DBG_PRINT(ERR_DBG, "reads:0x%llx\n", x);
3420 val64 = readq(&bar0->swapper_ctrl);
3421 val64 &= 0xFFFF000000000000ULL;
3425 * The device by default set to a big endian format, so a
3426 * big endian driver need not set anything.
3428 val64 |= (SWAPPER_CTRL_TXP_FE |
3429 SWAPPER_CTRL_TXP_SE |
3430 SWAPPER_CTRL_TXD_R_FE |
3431 SWAPPER_CTRL_TXD_W_FE |
3432 SWAPPER_CTRL_TXF_R_FE |
3433 SWAPPER_CTRL_RXD_R_FE |
3434 SWAPPER_CTRL_RXD_W_FE |
3435 SWAPPER_CTRL_RXF_W_FE |
3436 SWAPPER_CTRL_XMSI_FE |
3437 SWAPPER_CTRL_STATS_FE | SWAPPER_CTRL_STATS_SE);
3438 if (sp->intr_type == INTA)
3439 val64 |= SWAPPER_CTRL_XMSI_SE;
3440 writeq(val64, &bar0->swapper_ctrl);
3443 * Initially we enable all bits to make it accessible by the
3444 * driver, then we selectively enable only those bits that
3447 val64 |= (SWAPPER_CTRL_TXP_FE |
3448 SWAPPER_CTRL_TXP_SE |
3449 SWAPPER_CTRL_TXD_R_FE |
3450 SWAPPER_CTRL_TXD_R_SE |
3451 SWAPPER_CTRL_TXD_W_FE |
3452 SWAPPER_CTRL_TXD_W_SE |
3453 SWAPPER_CTRL_TXF_R_FE |
3454 SWAPPER_CTRL_RXD_R_FE |
3455 SWAPPER_CTRL_RXD_R_SE |
3456 SWAPPER_CTRL_RXD_W_FE |
3457 SWAPPER_CTRL_RXD_W_SE |
3458 SWAPPER_CTRL_RXF_W_FE |
3459 SWAPPER_CTRL_XMSI_FE |
3460 SWAPPER_CTRL_STATS_FE | SWAPPER_CTRL_STATS_SE);
3461 if (sp->intr_type == INTA)
3462 val64 |= SWAPPER_CTRL_XMSI_SE;
3463 writeq(val64, &bar0->swapper_ctrl);
3465 val64 = readq(&bar0->swapper_ctrl);
3468 * Verifying if endian settings are accurate by reading a
3469 * feedback register.
3471 val64 = readq(&bar0->pif_rd_swapper_fb);
3472 if (val64 != 0x0123456789ABCDEFULL) {
3473 /* Endian settings are incorrect, calls for another dekko. */
3474 DBG_PRINT(ERR_DBG, "%s: Endian settings are wrong, ",
3476 DBG_PRINT(ERR_DBG, "feedback read %llx\n",
3477 (unsigned long long) val64);
3484 static int wait_for_msix_trans(struct s2io_nic *nic, int i)
3486 struct XENA_dev_config __iomem *bar0 = nic->bar0;
3488 int ret = 0, cnt = 0;
3491 val64 = readq(&bar0->xmsi_access);
3492 if (!(val64 & BIT(15)))
3498 DBG_PRINT(ERR_DBG, "XMSI # %d Access failed\n", i);
3505 static void restore_xmsi_data(struct s2io_nic *nic)
3507 struct XENA_dev_config __iomem *bar0 = nic->bar0;
3511 for (i=0; i < MAX_REQUESTED_MSI_X; i++) {
3512 writeq(nic->msix_info[i].addr, &bar0->xmsi_address);
3513 writeq(nic->msix_info[i].data, &bar0->xmsi_data);
3514 val64 = (BIT(7) | BIT(15) | vBIT(i, 26, 6));
3515 writeq(val64, &bar0->xmsi_access);
3516 if (wait_for_msix_trans(nic, i)) {
3517 DBG_PRINT(ERR_DBG, "failed in %s\n", __FUNCTION__);
3523 static void store_xmsi_data(struct s2io_nic *nic)
3525 struct XENA_dev_config __iomem *bar0 = nic->bar0;
3526 u64 val64, addr, data;
3529 /* Store and display */
3530 for (i=0; i < MAX_REQUESTED_MSI_X; i++) {
3531 val64 = (BIT(15) | vBIT(i, 26, 6));
3532 writeq(val64, &bar0->xmsi_access);
3533 if (wait_for_msix_trans(nic, i)) {
3534 DBG_PRINT(ERR_DBG, "failed in %s\n", __FUNCTION__);
3537 addr = readq(&bar0->xmsi_address);
3538 data = readq(&bar0->xmsi_data);
3540 nic->msix_info[i].addr = addr;
3541 nic->msix_info[i].data = data;
3546 int s2io_enable_msi(struct s2io_nic *nic)
3548 struct XENA_dev_config __iomem *bar0 = nic->bar0;
3549 u16 msi_ctrl, msg_val;
3550 struct config_param *config = &nic->config;
3551 struct net_device *dev = nic->dev;
3552 u64 val64, tx_mat, rx_mat;
3555 val64 = readq(&bar0->pic_control);
3557 writeq(val64, &bar0->pic_control);
3559 err = pci_enable_msi(nic->pdev);
3561 DBG_PRINT(ERR_DBG, "%s: enabling MSI failed\n",
3567 * Enable MSI and use MSI-1 in stead of the standard MSI-0
3568 * for interrupt handling.
3570 pci_read_config_word(nic->pdev, 0x4c, &msg_val);
3572 pci_write_config_word(nic->pdev, 0x4c, msg_val);
3573 pci_read_config_word(nic->pdev, 0x4c, &msg_val);
3575 pci_read_config_word(nic->pdev, 0x42, &msi_ctrl);
3577 pci_write_config_word(nic->pdev, 0x42, msi_ctrl);
3579 /* program MSI-1 into all usable Tx_Mat and Rx_Mat fields */
3580 tx_mat = readq(&bar0->tx_mat0_n[0]);
3581 for (i=0; i<config->tx_fifo_num; i++) {
3582 tx_mat |= TX_MAT_SET(i, 1);
3584 writeq(tx_mat, &bar0->tx_mat0_n[0]);
3586 rx_mat = readq(&bar0->rx_mat);
3587 for (i=0; i<config->rx_ring_num; i++) {
3588 rx_mat |= RX_MAT_SET(i, 1);
3590 writeq(rx_mat, &bar0->rx_mat);
3592 dev->irq = nic->pdev->irq;
3596 static int s2io_enable_msi_x(struct s2io_nic *nic)
3598 struct XENA_dev_config __iomem *bar0 = nic->bar0;
3600 u16 msi_control; /* Temp variable */
3601 int ret, i, j, msix_indx = 1;
3603 nic->entries = kmalloc(MAX_REQUESTED_MSI_X * sizeof(struct msix_entry),
3605 if (nic->entries == NULL) {
3606 DBG_PRINT(ERR_DBG, "%s: Memory allocation failed\n", __FUNCTION__);
3609 memset(nic->entries, 0, MAX_REQUESTED_MSI_X * sizeof(struct msix_entry));
3612 kmalloc(MAX_REQUESTED_MSI_X * sizeof(struct s2io_msix_entry),
3614 if (nic->s2io_entries == NULL) {
3615 DBG_PRINT(ERR_DBG, "%s: Memory allocation failed\n", __FUNCTION__);
3616 kfree(nic->entries);
3619 memset(nic->s2io_entries, 0,
3620 MAX_REQUESTED_MSI_X * sizeof(struct s2io_msix_entry));
3622 for (i=0; i< MAX_REQUESTED_MSI_X; i++) {
3623 nic->entries[i].entry = i;
3624 nic->s2io_entries[i].entry = i;
3625 nic->s2io_entries[i].arg = NULL;
3626 nic->s2io_entries[i].in_use = 0;
3629 tx_mat = readq(&bar0->tx_mat0_n[0]);
3630 for (i=0; i<nic->config.tx_fifo_num; i++, msix_indx++) {
3631 tx_mat |= TX_MAT_SET(i, msix_indx);
3632 nic->s2io_entries[msix_indx].arg = &nic->mac_control.fifos[i];
3633 nic->s2io_entries[msix_indx].type = MSIX_FIFO_TYPE;
3634 nic->s2io_entries[msix_indx].in_use = MSIX_FLG;
3636 writeq(tx_mat, &bar0->tx_mat0_n[0]);
3638 if (!nic->config.bimodal) {
3639 rx_mat = readq(&bar0->rx_mat);
3640 for (j=0; j<nic->config.rx_ring_num; j++, msix_indx++) {
3641 rx_mat |= RX_MAT_SET(j, msix_indx);
3642 nic->s2io_entries[msix_indx].arg = &nic->mac_control.rings[j];
3643 nic->s2io_entries[msix_indx].type = MSIX_RING_TYPE;
3644 nic->s2io_entries[msix_indx].in_use = MSIX_FLG;
3646 writeq(rx_mat, &bar0->rx_mat);
3648 tx_mat = readq(&bar0->tx_mat0_n[7]);
3649 for (j=0; j<nic->config.rx_ring_num; j++, msix_indx++) {
3650 tx_mat |= TX_MAT_SET(i, msix_indx);
3651 nic->s2io_entries[msix_indx].arg = &nic->mac_control.rings[j];
3652 nic->s2io_entries[msix_indx].type = MSIX_RING_TYPE;
3653 nic->s2io_entries[msix_indx].in_use = MSIX_FLG;
3655 writeq(tx_mat, &bar0->tx_mat0_n[7]);
3658 nic->avail_msix_vectors = 0;
3659 ret = pci_enable_msix(nic->pdev, nic->entries, MAX_REQUESTED_MSI_X);
3660 /* We fail init if error or we get less vectors than min required */
3661 if (ret >= (nic->config.tx_fifo_num + nic->config.rx_ring_num + 1)) {
3662 nic->avail_msix_vectors = ret;
3663 ret = pci_enable_msix(nic->pdev, nic->entries, ret);
3666 DBG_PRINT(ERR_DBG, "%s: Enabling MSIX failed\n", nic->dev->name);
3667 kfree(nic->entries);
3668 kfree(nic->s2io_entries);
3669 nic->entries = NULL;
3670 nic->s2io_entries = NULL;
3671 nic->avail_msix_vectors = 0;
3674 if (!nic->avail_msix_vectors)
3675 nic->avail_msix_vectors = MAX_REQUESTED_MSI_X;
3678 * To enable MSI-X, MSI also needs to be enabled, due to a bug
3679 * in the herc NIC. (Temp change, needs to be removed later)
3681 pci_read_config_word(nic->pdev, 0x42, &msi_control);
3682 msi_control |= 0x1; /* Enable MSI */
3683 pci_write_config_word(nic->pdev, 0x42, msi_control);
3688 /* ********************************************************* *
3689 * Functions defined below concern the OS part of the driver *
3690 * ********************************************************* */
3693 * s2io_open - open entry point of the driver
3694 * @dev : pointer to the device structure.
3696 * This function is the open entry point of the driver. It mainly calls a
3697 * function to allocate Rx buffers and inserts them into the buffer
3698 * descriptors and then enables the Rx part of the NIC.
3700 * 0 on success and an appropriate (-)ve integer as defined in errno.h
3704 static int s2io_open(struct net_device *dev)
3706 struct s2io_nic *sp = dev->priv;
3710 * Make sure you have link off by default every time
3711 * Nic is initialized
3713 netif_carrier_off(dev);
3714 sp->last_link_state = 0;
3716 /* Initialize H/W and enable interrupts */
3717 err = s2io_card_up(sp);
3719 DBG_PRINT(ERR_DBG, "%s: H/W initialization failed\n",
3721 goto hw_init_failed;
3724 if (s2io_set_mac_addr(dev, dev->dev_addr) == FAILURE) {
3725 DBG_PRINT(ERR_DBG, "Set Mac Address Failed\n");
3728 goto hw_init_failed;
3731 netif_start_queue(dev);
3735 if (sp->intr_type == MSI_X) {
3738 if (sp->s2io_entries)
3739 kfree(sp->s2io_entries);
3745 * s2io_close -close entry point of the driver
3746 * @dev : device pointer.
3748 * This is the stop entry point of the driver. It needs to undo exactly
3749 * whatever was done by the open entry point,thus it's usually referred to
3750 * as the close function.Among other things this function mainly stops the
3751 * Rx side of the NIC and frees all the Rx buffers in the Rx rings.
3753 * 0 on success and an appropriate (-)ve integer as defined in errno.h
3757 static int s2io_close(struct net_device *dev)
3759 struct s2io_nic *sp = dev->priv;
3761 flush_scheduled_work();
3762 netif_stop_queue(dev);
3763 /* Reset card, kill tasklet and free Tx and Rx buffers. */
3766 sp->device_close_flag = TRUE; /* Device is shut down. */
3771 * s2io_xmit - Tx entry point of te driver
3772 * @skb : the socket buffer containing the Tx data.
3773 * @dev : device pointer.
3775 * This function is the Tx entry point of the driver. S2IO NIC supports
3776 * certain protocol assist features on Tx side, namely CSO, S/G, LSO.
3777 * NOTE: when device cant queue the pkt,just the trans_start variable will
3780 * 0 on success & 1 on failure.
3783 static int s2io_xmit(struct sk_buff *skb, struct net_device *dev)
3785 struct s2io_nic *sp = dev->priv;
3786 u16 frg_cnt, frg_len, i, queue, queue_len, put_off, get_off;
3789 struct TxFIFO_element __iomem *tx_fifo;
3790 unsigned long flags;
3792 int vlan_priority = 0;
3793 struct mac_info *mac_control;
3794 struct config_param *config;
3797 mac_control = &sp->mac_control;
3798 config = &sp->config;
3800 DBG_PRINT(TX_DBG, "%s: In Neterion Tx routine\n", dev->name);
3801 spin_lock_irqsave(&sp->tx_lock, flags);
3802 if (atomic_read(&sp->card_state) == CARD_DOWN) {
3803 DBG_PRINT(TX_DBG, "%s: Card going down for reset\n",
3805 spin_unlock_irqrestore(&sp->tx_lock, flags);
3812 /* Get Fifo number to Transmit based on vlan priority */
3813 if (sp->vlgrp && vlan_tx_tag_present(skb)) {
3814 vlan_tag = vlan_tx_tag_get(skb);
3815 vlan_priority = vlan_tag >> 13;
3816 queue = config->fifo_mapping[vlan_priority];
3819 put_off = (u16) mac_control->fifos[queue].tx_curr_put_info.offset;
3820 get_off = (u16) mac_control->fifos[queue].tx_curr_get_info.offset;
3821 txdp = (struct TxD *) mac_control->fifos[queue].list_info[put_off].
3824 queue_len = mac_control->fifos[queue].tx_curr_put_info.fifo_len + 1;
3825 /* Avoid "put" pointer going beyond "get" pointer */
3826 if (txdp->Host_Control ||
3827 ((put_off+1) == queue_len ? 0 : (put_off+1)) == get_off) {
3828 DBG_PRINT(TX_DBG, "Error in xmit, No free TXDs.\n");
3829 netif_stop_queue(dev);
3831 spin_unlock_irqrestore(&sp->tx_lock, flags);
3835 /* A buffer with no data will be dropped */
3837 DBG_PRINT(TX_DBG, "%s:Buffer has no data..\n", dev->name);
3839 spin_unlock_irqrestore(&sp->tx_lock, flags);
3843 offload_type = s2io_offload_type(skb);
3844 if (offload_type & (SKB_GSO_TCPV4 | SKB_GSO_TCPV6)) {
3845 txdp->Control_1 |= TXD_TCP_LSO_EN;
3846 txdp->Control_1 |= TXD_TCP_LSO_MSS(s2io_tcp_mss(skb));
3848 if (skb->ip_summed == CHECKSUM_PARTIAL) {
3850 (TXD_TX_CKO_IPV4_EN | TXD_TX_CKO_TCP_EN |
3853 txdp->Control_1 |= TXD_GATHER_CODE_FIRST;
3854 txdp->Control_1 |= TXD_LIST_OWN_XENA;
3855 txdp->Control_2 |= config->tx_intr_type;
3857 if (sp->vlgrp && vlan_tx_tag_present(skb)) {
3858 txdp->Control_2 |= TXD_VLAN_ENABLE;
3859 txdp->Control_2 |= TXD_VLAN_TAG(vlan_tag);
3862 frg_len = skb->len - skb->data_len;
3863 if (offload_type == SKB_GSO_UDP) {
3866 ufo_size = s2io_udp_mss(skb);
3868 txdp->Control_1 |= TXD_UFO_EN;
3869 txdp->Control_1 |= TXD_UFO_MSS(ufo_size);
3870 txdp->Control_1 |= TXD_BUFFER0_SIZE(8);
3872 sp->ufo_in_band_v[put_off] =
3873 (u64)skb_shinfo(skb)->ip6_frag_id;
3875 sp->ufo_in_band_v[put_off] =
3876 (u64)skb_shinfo(skb)->ip6_frag_id << 32;
3878 txdp->Host_Control = (unsigned long)sp->ufo_in_band_v;
3879 txdp->Buffer_Pointer = pci_map_single(sp->pdev,
3881 sizeof(u64), PCI_DMA_TODEVICE);
3885 txdp->Buffer_Pointer = pci_map_single
3886 (sp->pdev, skb->data, frg_len, PCI_DMA_TODEVICE);
3887 txdp->Host_Control = (unsigned long) skb;
3888 txdp->Control_1 |= TXD_BUFFER0_SIZE(frg_len);
3889 if (offload_type == SKB_GSO_UDP)
3890 txdp->Control_1 |= TXD_UFO_EN;
3892 frg_cnt = skb_shinfo(skb)->nr_frags;
3893 /* For fragmented SKB. */
3894 for (i = 0; i < frg_cnt; i++) {
3895 skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
3896 /* A '0' length fragment will be ignored */
3900 txdp->Buffer_Pointer = (u64) pci_map_page
3901 (sp->pdev, frag->page, frag->page_offset,
3902 frag->size, PCI_DMA_TODEVICE);
3903 txdp->Control_1 = TXD_BUFFER0_SIZE(frag->size);
3904 if (offload_type == SKB_GSO_UDP)
3905 txdp->Control_1 |= TXD_UFO_EN;
3907 txdp->Control_1 |= TXD_GATHER_CODE_LAST;
3909 if (offload_type == SKB_GSO_UDP)
3910 frg_cnt++; /* as Txd0 was used for inband header */
3912 tx_fifo = mac_control->tx_FIFO_start[queue];
3913 val64 = mac_control->fifos[queue].list_info[put_off].list_phy_addr;
3914 writeq(val64, &tx_fifo->TxDL_Pointer);
3916 val64 = (TX_FIFO_LAST_TXD_NUM(frg_cnt) | TX_FIFO_FIRST_LIST |
3919 val64 |= TX_FIFO_SPECIAL_FUNC;
3921 writeq(val64, &tx_fifo->List_Control);
3926 if (put_off == mac_control->fifos[queue].tx_curr_put_info.fifo_len + 1)
3928 mac_control->fifos[queue].tx_curr_put_info.offset = put_off;
3930 /* Avoid "put" pointer going beyond "get" pointer */
3931 if (((put_off+1) == queue_len ? 0 : (put_off+1)) == get_off) {
3932 sp->mac_control.stats_info->sw_stat.fifo_full_cnt++;
3934 "No free TxDs for xmit, Put: 0x%x Get:0x%x\n",
3936 netif_stop_queue(dev);
3939 dev->trans_start = jiffies;
3940 spin_unlock_irqrestore(&sp->tx_lock, flags);
3946 s2io_alarm_handle(unsigned long data)
3948 struct s2io_nic *sp = (struct s2io_nic *)data;
3950 alarm_intr_handler(sp);
3951 mod_timer(&sp->alarm_timer, jiffies + HZ / 2);
3954 static int s2io_chk_rx_buffers(struct s2io_nic *sp, int rng_n)
3956 int rxb_size, level;
3959 rxb_size = atomic_read(&sp->rx_bufs_left[rng_n]);
3960 level = rx_buffer_level(sp, rxb_size, rng_n);
3962 if ((level == PANIC) && (!TASKLET_IN_USE)) {
3964 DBG_PRINT(INTR_DBG, "%s: Rx BD hit ", __FUNCTION__);
3965 DBG_PRINT(INTR_DBG, "PANIC levels\n");
3966 if ((ret = fill_rx_buffers(sp, rng_n)) == -ENOMEM) {
3967 DBG_PRINT(ERR_DBG, "Out of memory in %s",
3969 clear_bit(0, (&sp->tasklet_status));
3972 clear_bit(0, (&sp->tasklet_status));
3973 } else if (level == LOW)
3974 tasklet_schedule(&sp->task);
3976 } else if (fill_rx_buffers(sp, rng_n) == -ENOMEM) {
3977 DBG_PRINT(ERR_DBG, "%s:Out of memory", sp->dev->name);
3978 DBG_PRINT(ERR_DBG, " in Rx Intr!!\n");
3983 static irqreturn_t s2io_msi_handle(int irq, void *dev_id)
3985 struct net_device *dev = (struct net_device *) dev_id;
3986 struct s2io_nic *sp = dev->priv;
3988 struct mac_info *mac_control;
3989 struct config_param *config;
3991 atomic_inc(&sp->isr_cnt);
3992 mac_control = &sp->mac_control;
3993 config = &sp->config;
3994 DBG_PRINT(INTR_DBG, "%s: MSI handler\n", __FUNCTION__);
3996 /* If Intr is because of Rx Traffic */
3997 for (i = 0; i < config->rx_ring_num; i++)
3998 rx_intr_handler(&mac_control->rings[i]);
4000 /* If Intr is because of Tx Traffic */
4001 for (i = 0; i < config->tx_fifo_num; i++)
4002 tx_intr_handler(&mac_control->fifos[i]);
4005 * If the Rx buffer count is below the panic threshold then
4006 * reallocate the buffers from the interrupt handler itself,
4007 * else schedule a tasklet to reallocate the buffers.
4009 for (i = 0; i < config->rx_ring_num; i++)
4010 s2io_chk_rx_buffers(sp, i);
4012 atomic_dec(&sp->isr_cnt);
4016 static irqreturn_t s2io_msix_ring_handle(int irq, void *dev_id)
4018 struct ring_info *ring = (struct ring_info *)dev_id;
4019 struct s2io_nic *sp = ring->nic;
4021 atomic_inc(&sp->isr_cnt);
4023 rx_intr_handler(ring);
4024 s2io_chk_rx_buffers(sp, ring->ring_no);
4026 atomic_dec(&sp->isr_cnt);
4030 static irqreturn_t s2io_msix_fifo_handle(int irq, void *dev_id)
4032 struct fifo_info *fifo = (struct fifo_info *)dev_id;
4033 struct s2io_nic *sp = fifo->nic;
4035 atomic_inc(&sp->isr_cnt);
4036 tx_intr_handler(fifo);
4037 atomic_dec(&sp->isr_cnt);
4040 static void s2io_txpic_intr_handle(struct s2io_nic *sp)
4042 struct XENA_dev_config __iomem *bar0 = sp->bar0;
4045 val64 = readq(&bar0->pic_int_status);
4046 if (val64 & PIC_INT_GPIO) {
4047 val64 = readq(&bar0->gpio_int_reg);
4048 if ((val64 & GPIO_INT_REG_LINK_DOWN) &&
4049 (val64 & GPIO_INT_REG_LINK_UP)) {
4051 * This is unstable state so clear both up/down
4052 * interrupt and adapter to re-evaluate the link state.
4054 val64 |= GPIO_INT_REG_LINK_DOWN;
4055 val64 |= GPIO_INT_REG_LINK_UP;
4056 writeq(val64, &bar0->gpio_int_reg);
4057 val64 = readq(&bar0->gpio_int_mask);
4058 val64 &= ~(GPIO_INT_MASK_LINK_UP |
4059 GPIO_INT_MASK_LINK_DOWN);
4060 writeq(val64, &bar0->gpio_int_mask);
4062 else if (val64 & GPIO_INT_REG_LINK_UP) {
4063 val64 = readq(&bar0->adapter_status);
4064 /* Enable Adapter */
4065 val64 = readq(&bar0->adapter_control);
4066 val64 |= ADAPTER_CNTL_EN;
4067 writeq(val64, &bar0->adapter_control);
4068 val64 |= ADAPTER_LED_ON;
4069 writeq(val64, &bar0->adapter_control);
4070 if (!sp->device_enabled_once)
4071 sp->device_enabled_once = 1;
4073 s2io_link(sp, LINK_UP);
4075 * unmask link down interrupt and mask link-up
4078 val64 = readq(&bar0->gpio_int_mask);
4079 val64 &= ~GPIO_INT_MASK_LINK_DOWN;
4080 val64 |= GPIO_INT_MASK_LINK_UP;
4081 writeq(val64, &bar0->gpio_int_mask);
4083 }else if (val64 & GPIO_INT_REG_LINK_DOWN) {
4084 val64 = readq(&bar0->adapter_status);
4085 s2io_link(sp, LINK_DOWN);
4086 /* Link is down so unmaks link up interrupt */
4087 val64 = readq(&bar0->gpio_int_mask);
4088 val64 &= ~GPIO_INT_MASK_LINK_UP;
4089 val64 |= GPIO_INT_MASK_LINK_DOWN;
4090 writeq(val64, &bar0->gpio_int_mask);
4093 val64 = readq(&bar0->gpio_int_mask);
4097 * s2io_isr - ISR handler of the device .
4098 * @irq: the irq of the device.
4099 * @dev_id: a void pointer to the dev structure of the NIC.
4100 * Description: This function is the ISR handler of the device. It
4101 * identifies the reason for the interrupt and calls the relevant
4102 * service routines. As a contongency measure, this ISR allocates the
4103 * recv buffers, if their numbers are below the panic value which is
4104 * presently set to 25% of the original number of rcv buffers allocated.
4106 * IRQ_HANDLED: will be returned if IRQ was handled by this routine
4107 * IRQ_NONE: will be returned if interrupt is not from our device
4109 static irqreturn_t s2io_isr(int irq, void *dev_id)
4111 struct net_device *dev = (struct net_device *) dev_id;
4112 struct s2io_nic *sp = dev->priv;
4113 struct XENA_dev_config __iomem *bar0 = sp->bar0;
4116 struct mac_info *mac_control;
4117 struct config_param *config;
4119 atomic_inc(&sp->isr_cnt);
4120 mac_control = &sp->mac_control;
4121 config = &sp->config;
4124 * Identify the cause for interrupt and call the appropriate
4125 * interrupt handler. Causes for the interrupt could be;
4129 * 4. Error in any functional blocks of the NIC.
4131 reason = readq(&bar0->general_int_status);
4134 /* The interrupt was not raised by us. */
4135 atomic_dec(&sp->isr_cnt);
4138 else if (unlikely(reason == S2IO_MINUS_ONE) ) {
4139 /* Disable device and get out */
4140 atomic_dec(&sp->isr_cnt);
4145 if (reason & GEN_INTR_RXTRAFFIC) {
4146 if ( likely ( netif_rx_schedule_prep(dev)) ) {
4147 __netif_rx_schedule(dev);
4148 writeq(S2IO_MINUS_ONE, &bar0->rx_traffic_mask);
4151 writeq(S2IO_MINUS_ONE, &bar0->rx_traffic_int);
4155 * Rx handler is called by default, without checking for the
4156 * cause of interrupt.
4157 * rx_traffic_int reg is an R1 register, writing all 1's
4158 * will ensure that the actual interrupt causing bit get's
4159 * cleared and hence a read can be avoided.
4161 if (reason & GEN_INTR_RXTRAFFIC)
4162 writeq(S2IO_MINUS_ONE, &bar0->rx_traffic_int);
4164 for (i = 0; i < config->rx_ring_num; i++) {
4165 rx_intr_handler(&mac_control->rings[i]);
4170 * tx_traffic_int reg is an R1 register, writing all 1's
4171 * will ensure that the actual interrupt causing bit get's
4172 * cleared and hence a read can be avoided.
4174 if (reason & GEN_INTR_TXTRAFFIC)
4175 writeq(S2IO_MINUS_ONE, &bar0->tx_traffic_int);
4177 for (i = 0; i < config->tx_fifo_num; i++)
4178 tx_intr_handler(&mac_control->fifos[i]);
4180 if (reason & GEN_INTR_TXPIC)
4181 s2io_txpic_intr_handle(sp);
4183 * If the Rx buffer count is below the panic threshold then
4184 * reallocate the buffers from the interrupt handler itself,
4185 * else schedule a tasklet to reallocate the buffers.
4188 for (i = 0; i < config->rx_ring_num; i++)
4189 s2io_chk_rx_buffers(sp, i);
4192 writeq(0, &bar0->general_int_mask);
4193 readl(&bar0->general_int_status);
4195 atomic_dec(&sp->isr_cnt);
4202 static void s2io_updt_stats(struct s2io_nic *sp)
4204 struct XENA_dev_config __iomem *bar0 = sp->bar0;
4208 if (atomic_read(&sp->card_state) == CARD_UP) {
4209 /* Apprx 30us on a 133 MHz bus */
4210 val64 = SET_UPDT_CLICKS(10) |
4211 STAT_CFG_ONE_SHOT_EN | STAT_CFG_STAT_EN;
4212 writeq(val64, &bar0->stat_cfg);
4215 val64 = readq(&bar0->stat_cfg);
4216 if (!(val64 & BIT(0)))
4220 break; /* Updt failed */
4223 memset(sp->mac_control.stats_info, 0, sizeof(struct stat_block));
4228 * s2io_get_stats - Updates the device statistics structure.
4229 * @dev : pointer to the device structure.
4231 * This function updates the device statistics structure in the s2io_nic
4232 * structure and returns a pointer to the same.
4234 * pointer to the updated net_device_stats structure.
4237 static struct net_device_stats *s2io_get_stats(struct net_device *dev)
4239 struct s2io_nic *sp = dev->priv;
4240 struct mac_info *mac_control;
4241 struct config_param *config;
4244 mac_control = &sp->mac_control;
4245 config = &sp->config;
4247 /* Configure Stats for immediate updt */
4248 s2io_updt_stats(sp);
4250 sp->stats.tx_packets =
4251 le32_to_cpu(mac_control->stats_info->tmac_frms);
4252 sp->stats.tx_errors =
4253 le32_to_cpu(mac_control->stats_info->tmac_any_err_frms);
4254 sp->stats.rx_errors =
4255 le64_to_cpu(mac_control->stats_info->rmac_drop_frms);
4256 sp->stats.multicast =
4257 le32_to_cpu(mac_control->stats_info->rmac_vld_mcst_frms);
4258 sp->stats.rx_length_errors =
4259 le64_to_cpu(mac_control->stats_info->rmac_long_frms);
4261 return (&sp->stats);
4265 * s2io_set_multicast - entry point for multicast address enable/disable.
4266 * @dev : pointer to the device structure
4268 * This function is a driver entry point which gets called by the kernel
4269 * whenever multicast addresses must be enabled/disabled. This also gets
4270 * called to set/reset promiscuous mode. Depending on the deivce flag, we
4271 * determine, if multicast address must be enabled or if promiscuous mode
4272 * is to be disabled etc.
4277 static void s2io_set_multicast(struct net_device *dev)
4280 struct dev_mc_list *mclist;
4281 struct s2io_nic *sp = dev->priv;
4282 struct XENA_dev_config __iomem *bar0 = sp->bar0;
4283 u64 val64 = 0, multi_mac = 0x010203040506ULL, mask =
4285 u64 dis_addr = 0xffffffffffffULL, mac_addr = 0;
4288 if ((dev->flags & IFF_ALLMULTI) && (!sp->m_cast_flg)) {
4289 /* Enable all Multicast addresses */
4290 writeq(RMAC_ADDR_DATA0_MEM_ADDR(multi_mac),
4291 &bar0->rmac_addr_data0_mem);
4292 writeq(RMAC_ADDR_DATA1_MEM_MASK(mask),
4293 &bar0->rmac_addr_data1_mem);
4294 val64 = RMAC_ADDR_CMD_MEM_WE |
4295 RMAC_ADDR_CMD_MEM_STROBE_NEW_CMD |
4296 RMAC_ADDR_CMD_MEM_OFFSET(MAC_MC_ALL_MC_ADDR_OFFSET);
4297 writeq(val64, &bar0->rmac_addr_cmd_mem);
4298 /* Wait till command completes */
4299 wait_for_cmd_complete(&bar0->rmac_addr_cmd_mem,
4300 RMAC_ADDR_CMD_MEM_STROBE_CMD_EXECUTING);
4303 sp->all_multi_pos = MAC_MC_ALL_MC_ADDR_OFFSET;
4304 } else if ((dev->flags & IFF_ALLMULTI) && (sp->m_cast_flg)) {
4305 /* Disable all Multicast addresses */
4306 writeq(RMAC_ADDR_DATA0_MEM_ADDR(dis_addr),
4307 &bar0->rmac_addr_data0_mem);
4308 writeq(RMAC_ADDR_DATA1_MEM_MASK(0x0),
4309 &bar0->rmac_addr_data1_mem);
4310 val64 = RMAC_ADDR_CMD_MEM_WE |
4311 RMAC_ADDR_CMD_MEM_STROBE_NEW_CMD |
4312 RMAC_ADDR_CMD_MEM_OFFSET(sp->all_multi_pos);
4313 writeq(val64, &bar0->rmac_addr_cmd_mem);
4314 /* Wait till command completes */
4315 wait_for_cmd_complete(&bar0->rmac_addr_cmd_mem,
4316 RMAC_ADDR_CMD_MEM_STROBE_CMD_EXECUTING);
4319 sp->all_multi_pos = 0;
4322 if ((dev->flags & IFF_PROMISC) && (!sp->promisc_flg)) {
4323 /* Put the NIC into promiscuous mode */
4324 add = &bar0->mac_cfg;
4325 val64 = readq(&bar0->mac_cfg);
4326 val64 |= MAC_CFG_RMAC_PROM_ENABLE;
4328 writeq(RMAC_CFG_KEY(0x4C0D), &bar0->rmac_cfg_key);
4329 writel((u32) val64, add);
4330 writeq(RMAC_CFG_KEY(0x4C0D), &bar0->rmac_cfg_key);
4331 writel((u32) (val64 >> 32), (add + 4));
4333 val64 = readq(&bar0->mac_cfg);
4334 sp->promisc_flg = 1;
4335 DBG_PRINT(INFO_DBG, "%s: entered promiscuous mode\n",
4337 } else if (!(dev->flags & IFF_PROMISC) && (sp->promisc_flg)) {
4338 /* Remove the NIC from promiscuous mode */
4339 add = &bar0->mac_cfg;
4340 val64 = readq(&bar0->mac_cfg);
4341 val64 &= ~MAC_CFG_RMAC_PROM_ENABLE;
4343 writeq(RMAC_CFG_KEY(0x4C0D), &bar0->rmac_cfg_key);
4344 writel((u32) val64, add);
4345 writeq(RMAC_CFG_KEY(0x4C0D), &bar0->rmac_cfg_key);
4346 writel((u32) (val64 >> 32), (add + 4));
4348 val64 = readq(&bar0->mac_cfg);
4349 sp->promisc_flg = 0;
4350 DBG_PRINT(INFO_DBG, "%s: left promiscuous mode\n",
4354 /* Update individual M_CAST address list */
4355 if ((!sp->m_cast_flg) && dev->mc_count) {
4357 (MAX_ADDRS_SUPPORTED - MAC_MC_ADDR_START_OFFSET - 1)) {
4358 DBG_PRINT(ERR_DBG, "%s: No more Rx filters ",
4360 DBG_PRINT(ERR_DBG, "can be added, please enable ");
4361 DBG_PRINT(ERR_DBG, "ALL_MULTI instead\n");
4365 prev_cnt = sp->mc_addr_count;
4366 sp->mc_addr_count = dev->mc_count;
4368 /* Clear out the previous list of Mc in the H/W. */
4369 for (i = 0; i < prev_cnt; i++) {
4370 writeq(RMAC_ADDR_DATA0_MEM_ADDR(dis_addr),
4371 &bar0->rmac_addr_data0_mem);
4372 writeq(RMAC_ADDR_DATA1_MEM_MASK(0ULL),
4373 &bar0->rmac_addr_data1_mem);
4374 val64 = RMAC_ADDR_CMD_MEM_WE |
4375 RMAC_ADDR_CMD_MEM_STROBE_NEW_CMD |
4376 RMAC_ADDR_CMD_MEM_OFFSET
4377 (MAC_MC_ADDR_START_OFFSET + i);
4378 writeq(val64, &bar0->rmac_addr_cmd_mem);
4380 /* Wait for command completes */
4381 if (wait_for_cmd_complete(&bar0->rmac_addr_cmd_mem,
4382 RMAC_ADDR_CMD_MEM_STROBE_CMD_EXECUTING)) {
4383 DBG_PRINT(ERR_DBG, "%s: Adding ",
4385 DBG_PRINT(ERR_DBG, "Multicasts failed\n");
4390 /* Create the new Rx filter list and update the same in H/W. */
4391 for (i = 0, mclist = dev->mc_list; i < dev->mc_count;
4392 i++, mclist = mclist->next) {
4393 memcpy(sp->usr_addrs[i].addr, mclist->dmi_addr,
4396 for (j = 0; j < ETH_ALEN; j++) {
4397 mac_addr |= mclist->dmi_addr[j];
4401 writeq(RMAC_ADDR_DATA0_MEM_ADDR(mac_addr),
4402 &bar0->rmac_addr_data0_mem);
4403 writeq(RMAC_ADDR_DATA1_MEM_MASK(0ULL),
4404 &bar0->rmac_addr_data1_mem);
4405 val64 = RMAC_ADDR_CMD_MEM_WE |
4406 RMAC_ADDR_CMD_MEM_STROBE_NEW_CMD |
4407 RMAC_ADDR_CMD_MEM_OFFSET
4408 (i + MAC_MC_ADDR_START_OFFSET);
4409 writeq(val64, &bar0->rmac_addr_cmd_mem);
4411 /* Wait for command completes */
4412 if (wait_for_cmd_complete(&bar0->rmac_addr_cmd_mem,
4413 RMAC_ADDR_CMD_MEM_STROBE_CMD_EXECUTING)) {
4414 DBG_PRINT(ERR_DBG, "%s: Adding ",
4416 DBG_PRINT(ERR_DBG, "Multicasts failed\n");
4424 * s2io_set_mac_addr - Programs the Xframe mac address
4425 * @dev : pointer to the device structure.
4426 * @addr: a uchar pointer to the new mac address which is to be set.
4427 * Description : This procedure will program the Xframe to receive
4428 * frames with new Mac Address
4429 * Return value: SUCCESS on success and an appropriate (-)ve integer
4430 * as defined in errno.h file on failure.
4433 static int s2io_set_mac_addr(struct net_device *dev, u8 * addr)
4435 struct s2io_nic *sp = dev->priv;
4436 struct XENA_dev_config __iomem *bar0 = sp->bar0;
4437 register u64 val64, mac_addr = 0;
4441 * Set the new MAC address as the new unicast filter and reflect this
4442 * change on the device address registered with the OS. It will be
4445 for (i = 0; i < ETH_ALEN; i++) {
4447 mac_addr |= addr[i];
4450 writeq(RMAC_ADDR_DATA0_MEM_ADDR(mac_addr),
4451 &bar0->rmac_addr_data0_mem);
4454 RMAC_ADDR_CMD_MEM_WE | RMAC_ADDR_CMD_MEM_STROBE_NEW_CMD |
4455 RMAC_ADDR_CMD_MEM_OFFSET(0);
4456 writeq(val64, &bar0->rmac_addr_cmd_mem);
4457 /* Wait till command completes */
4458 if (wait_for_cmd_complete(&bar0->rmac_addr_cmd_mem,
4459 RMAC_ADDR_CMD_MEM_STROBE_CMD_EXECUTING)) {
4460 DBG_PRINT(ERR_DBG, "%s: set_mac_addr failed\n", dev->name);
4468 * s2io_ethtool_sset - Sets different link parameters.
4469 * @sp : private member of the device structure, which is a pointer to the * s2io_nic structure.
4470 * @info: pointer to the structure with parameters given by ethtool to set
4473 * The function sets different link parameters provided by the user onto
4479 static int s2io_ethtool_sset(struct net_device *dev,
4480 struct ethtool_cmd *info)
4482 struct s2io_nic *sp = dev->priv;
4483 if ((info->autoneg == AUTONEG_ENABLE) ||
4484 (info->speed != SPEED_10000) || (info->duplex != DUPLEX_FULL))
4487 s2io_close(sp->dev);
4495 * s2io_ethtol_gset - Return link specific information.
4496 * @sp : private member of the device structure, pointer to the
4497 * s2io_nic structure.
4498 * @info : pointer to the structure with parameters given by ethtool
4499 * to return link information.
4501 * Returns link specific information like speed, duplex etc.. to ethtool.
4503 * return 0 on success.
4506 static int s2io_ethtool_gset(struct net_device *dev, struct ethtool_cmd *info)
4508 struct s2io_nic *sp = dev->priv;
4509 info->supported = (SUPPORTED_10000baseT_Full | SUPPORTED_FIBRE);
4510 info->advertising = (SUPPORTED_10000baseT_Full | SUPPORTED_FIBRE);
4511 info->port = PORT_FIBRE;
4512 /* info->transceiver?? TODO */
4514 if (netif_carrier_ok(sp->dev)) {
4515 info->speed = 10000;
4516 info->duplex = DUPLEX_FULL;
4522 info->autoneg = AUTONEG_DISABLE;
4527 * s2io_ethtool_gdrvinfo - Returns driver specific information.
4528 * @sp : private member of the device structure, which is a pointer to the
4529 * s2io_nic structure.
4530 * @info : pointer to the structure with parameters given by ethtool to
4531 * return driver information.
4533 * Returns driver specefic information like name, version etc.. to ethtool.
4538 static void s2io_ethtool_gdrvinfo(struct net_device *dev,
4539 struct ethtool_drvinfo *info)
4541 struct s2io_nic *sp = dev->priv;
4543 strncpy(info->driver, s2io_driver_name, sizeof(info->driver));
4544 strncpy(info->version, s2io_driver_version, sizeof(info->version));
4545 strncpy(info->fw_version, "", sizeof(info->fw_version));
4546 strncpy(info->bus_info, pci_name(sp->pdev), sizeof(info->bus_info));
4547 info->regdump_len = XENA_REG_SPACE;
4548 info->eedump_len = XENA_EEPROM_SPACE;
4549 info->testinfo_len = S2IO_TEST_LEN;
4550 info->n_stats = S2IO_STAT_LEN;
4554 * s2io_ethtool_gregs - dumps the entire space of Xfame into the buffer.
4555 * @sp: private member of the device structure, which is a pointer to the
4556 * s2io_nic structure.
4557 * @regs : pointer to the structure with parameters given by ethtool for
4558 * dumping the registers.
4559 * @reg_space: The input argumnet into which all the registers are dumped.
4561 * Dumps the entire register space of xFrame NIC into the user given
4567 static void s2io_ethtool_gregs(struct net_device *dev,
4568 struct ethtool_regs *regs, void *space)
4572 u8 *reg_space = (u8 *) space;
4573 struct s2io_nic *sp = dev->priv;
4575 regs->len = XENA_REG_SPACE;
4576 regs->version = sp->pdev->subsystem_device;
4578 for (i = 0; i < regs->len; i += 8) {
4579 reg = readq(sp->bar0 + i);
4580 memcpy((reg_space + i), ®, 8);
4585 * s2io_phy_id - timer function that alternates adapter LED.
4586 * @data : address of the private member of the device structure, which
4587 * is a pointer to the s2io_nic structure, provided as an u32.
4588 * Description: This is actually the timer function that alternates the
4589 * adapter LED bit of the adapter control bit to set/reset every time on
4590 * invocation. The timer is set for 1/2 a second, hence tha NIC blinks
4591 * once every second.
4593 static void s2io_phy_id(unsigned long data)
4595 struct s2io_nic *sp = (struct s2io_nic *) data;
4596 struct XENA_dev_config __iomem *bar0 = sp->bar0;
4600 subid = sp->pdev->subsystem_device;
4601 if ((sp->device_type == XFRAME_II_DEVICE) ||
4602 ((subid & 0xFF) >= 0x07)) {
4603 val64 = readq(&bar0->gpio_control);
4604 val64 ^= GPIO_CTRL_GPIO_0;
4605 writeq(val64, &bar0->gpio_control);
4607 val64 = readq(&bar0->adapter_control);
4608 val64 ^= ADAPTER_LED_ON;
4609 writeq(val64, &bar0->adapter_control);
4612 mod_timer(&sp->id_timer, jiffies + HZ / 2);
4616 * s2io_ethtool_idnic - To physically identify the nic on the system.
4617 * @sp : private member of the device structure, which is a pointer to the
4618 * s2io_nic structure.
4619 * @id : pointer to the structure with identification parameters given by
4621 * Description: Used to physically identify the NIC on the system.
4622 * The Link LED will blink for a time specified by the user for
4624 * NOTE: The Link has to be Up to be able to blink the LED. Hence
4625 * identification is possible only if it's link is up.
4627 * int , returns 0 on success
4630 static int s2io_ethtool_idnic(struct net_device *dev, u32 data)
4632 u64 val64 = 0, last_gpio_ctrl_val;
4633 struct s2io_nic *sp = dev->priv;
4634 struct XENA_dev_config __iomem *bar0 = sp->bar0;
4637 subid = sp->pdev->subsystem_device;
4638 last_gpio_ctrl_val = readq(&bar0->gpio_control);
4639 if ((sp->device_type == XFRAME_I_DEVICE) &&
4640 ((subid & 0xFF) < 0x07)) {
4641 val64 = readq(&bar0->adapter_control);
4642 if (!(val64 & ADAPTER_CNTL_EN)) {
4644 "Adapter Link down, cannot blink LED\n");
4648 if (sp->id_timer.function == NULL) {
4649 init_timer(&sp->id_timer);
4650 sp->id_timer.function = s2io_phy_id;
4651 sp->id_timer.data = (unsigned long) sp;
4653 mod_timer(&sp->id_timer, jiffies);
4655 msleep_interruptible(data * HZ);
4657 msleep_interruptible(MAX_FLICKER_TIME);
4658 del_timer_sync(&sp->id_timer);
4660 if (CARDS_WITH_FAULTY_LINK_INDICATORS(sp->device_type, subid)) {
4661 writeq(last_gpio_ctrl_val, &bar0->gpio_control);
4662 last_gpio_ctrl_val = readq(&bar0->gpio_control);
4669 * s2io_ethtool_getpause_data -Pause frame frame generation and reception.
4670 * @sp : private member of the device structure, which is a pointer to the
4671 * s2io_nic structure.
4672 * @ep : pointer to the structure with pause parameters given by ethtool.
4674 * Returns the Pause frame generation and reception capability of the NIC.
4678 static void s2io_ethtool_getpause_data(struct net_device *dev,
4679 struct ethtool_pauseparam *ep)
4682 struct s2io_nic *sp = dev->priv;
4683 struct XENA_dev_config __iomem *bar0 = sp->bar0;
4685 val64 = readq(&bar0->rmac_pause_cfg);
4686 if (val64 & RMAC_PAUSE_GEN_ENABLE)
4687 ep->tx_pause = TRUE;
4688 if (val64 & RMAC_PAUSE_RX_ENABLE)
4689 ep->rx_pause = TRUE;
4690 ep->autoneg = FALSE;
4694 * s2io_ethtool_setpause_data - set/reset pause frame generation.
4695 * @sp : private member of the device structure, which is a pointer to the
4696 * s2io_nic structure.
4697 * @ep : pointer to the structure with pause parameters given by ethtool.
4699 * It can be used to set or reset Pause frame generation or reception
4700 * support of the NIC.
4702 * int, returns 0 on Success
4705 static int s2io_ethtool_setpause_data(struct net_device *dev,
4706 struct ethtool_pauseparam *ep)
4709 struct s2io_nic *sp = dev->priv;
4710 struct XENA_dev_config __iomem *bar0 = sp->bar0;
4712 val64 = readq(&bar0->rmac_pause_cfg);
4714 val64 |= RMAC_PAUSE_GEN_ENABLE;
4716 val64 &= ~RMAC_PAUSE_GEN_ENABLE;
4718 val64 |= RMAC_PAUSE_RX_ENABLE;
4720 val64 &= ~RMAC_PAUSE_RX_ENABLE;
4721 writeq(val64, &bar0->rmac_pause_cfg);
4726 * read_eeprom - reads 4 bytes of data from user given offset.
4727 * @sp : private member of the device structure, which is a pointer to the
4728 * s2io_nic structure.
4729 * @off : offset at which the data must be written
4730 * @data : Its an output parameter where the data read at the given
4733 * Will read 4 bytes of data from the user given offset and return the
4735 * NOTE: Will allow to read only part of the EEPROM visible through the
4738 * -1 on failure and 0 on success.
4741 #define S2IO_DEV_ID 5
4742 static int read_eeprom(struct s2io_nic * sp, int off, u64 * data)
4747 struct XENA_dev_config __iomem *bar0 = sp->bar0;
4749 if (sp->device_type == XFRAME_I_DEVICE) {
4750 val64 = I2C_CONTROL_DEV_ID(S2IO_DEV_ID) | I2C_CONTROL_ADDR(off) |
4751 I2C_CONTROL_BYTE_CNT(0x3) | I2C_CONTROL_READ |
4752 I2C_CONTROL_CNTL_START;
4753 SPECIAL_REG_WRITE(val64, &bar0->i2c_control, LF);
4755 while (exit_cnt < 5) {
4756 val64 = readq(&bar0->i2c_control);
4757 if (I2C_CONTROL_CNTL_END(val64)) {
4758 *data = I2C_CONTROL_GET_DATA(val64);
4767 if (sp->device_type == XFRAME_II_DEVICE) {
4768 val64 = SPI_CONTROL_KEY(0x9) | SPI_CONTROL_SEL1 |
4769 SPI_CONTROL_BYTECNT(0x3) |
4770 SPI_CONTROL_CMD(0x3) | SPI_CONTROL_ADDR(off);
4771 SPECIAL_REG_WRITE(val64, &bar0->spi_control, LF);
4772 val64 |= SPI_CONTROL_REQ;
4773 SPECIAL_REG_WRITE(val64, &bar0->spi_control, LF);
4774 while (exit_cnt < 5) {
4775 val64 = readq(&bar0->spi_control);
4776 if (val64 & SPI_CONTROL_NACK) {
4779 } else if (val64 & SPI_CONTROL_DONE) {
4780 *data = readq(&bar0->spi_data);
4793 * write_eeprom - actually writes the relevant part of the data value.
4794 * @sp : private member of the device structure, which is a pointer to the
4795 * s2io_nic structure.
4796 * @off : offset at which the data must be written
4797 * @data : The data that is to be written
4798 * @cnt : Number of bytes of the data that are actually to be written into
4799 * the Eeprom. (max of 3)
4801 * Actually writes the relevant part of the data value into the Eeprom
4802 * through the I2C bus.
4804 * 0 on success, -1 on failure.
4807 static int write_eeprom(struct s2io_nic * sp, int off, u64 data, int cnt)
4809 int exit_cnt = 0, ret = -1;
4811 struct XENA_dev_config __iomem *bar0 = sp->bar0;
4813 if (sp->device_type == XFRAME_I_DEVICE) {
4814 val64 = I2C_CONTROL_DEV_ID(S2IO_DEV_ID) | I2C_CONTROL_ADDR(off) |
4815 I2C_CONTROL_BYTE_CNT(cnt) | I2C_CONTROL_SET_DATA((u32)data) |
4816 I2C_CONTROL_CNTL_START;
4817 SPECIAL_REG_WRITE(val64, &bar0->i2c_control, LF);
4819 while (exit_cnt < 5) {
4820 val64 = readq(&bar0->i2c_control);
4821 if (I2C_CONTROL_CNTL_END(val64)) {
4822 if (!(val64 & I2C_CONTROL_NACK))
4831 if (sp->device_type == XFRAME_II_DEVICE) {
4832 int write_cnt = (cnt == 8) ? 0 : cnt;
4833 writeq(SPI_DATA_WRITE(data,(cnt<<3)), &bar0->spi_data);
4835 val64 = SPI_CONTROL_KEY(0x9) | SPI_CONTROL_SEL1 |
4836 SPI_CONTROL_BYTECNT(write_cnt) |
4837 SPI_CONTROL_CMD(0x2) | SPI_CONTROL_ADDR(off);
4838 SPECIAL_REG_WRITE(val64, &bar0->spi_control, LF);
4839 val64 |= SPI_CONTROL_REQ;
4840 SPECIAL_REG_WRITE(val64, &bar0->spi_control, LF);
4841 while (exit_cnt < 5) {
4842 val64 = readq(&bar0->spi_control);
4843 if (val64 & SPI_CONTROL_NACK) {
4846 } else if (val64 & SPI_CONTROL_DONE) {
4856 static void s2io_vpd_read(struct s2io_nic *nic)
4860 int i=0, cnt, fail = 0;
4861 int vpd_addr = 0x80;
4863 if (nic->device_type == XFRAME_II_DEVICE) {
4864 strcpy(nic->product_name, "Xframe II 10GbE network adapter");
4868 strcpy(nic->product_name, "Xframe I 10GbE network adapter");
4871 strcpy(nic->serial_num, "NOT AVAILABLE");
4873 vpd_data = kmalloc(256, GFP_KERNEL);
4877 for (i = 0; i < 256; i +=4 ) {
4878 pci_write_config_byte(nic->pdev, (vpd_addr + 2), i);
4879 pci_read_config_byte(nic->pdev, (vpd_addr + 2), &data);
4880 pci_write_config_byte(nic->pdev, (vpd_addr + 3), 0);
4881 for (cnt = 0; cnt <5; cnt++) {
4883 pci_read_config_byte(nic->pdev, (vpd_addr + 3), &data);
4888 DBG_PRINT(ERR_DBG, "Read of VPD data failed\n");
4892 pci_read_config_dword(nic->pdev, (vpd_addr + 4),
4893 (u32 *)&vpd_data[i]);
4897 /* read serial number of adapter */
4898 for (cnt = 0; cnt < 256; cnt++) {
4899 if ((vpd_data[cnt] == 'S') &&
4900 (vpd_data[cnt+1] == 'N') &&
4901 (vpd_data[cnt+2] < VPD_STRING_LEN)) {
4902 memset(nic->serial_num, 0, VPD_STRING_LEN);
4903 memcpy(nic->serial_num, &vpd_data[cnt + 3],
4910 if ((!fail) && (vpd_data[1] < VPD_STRING_LEN)) {
4911 memset(nic->product_name, 0, vpd_data[1]);
4912 memcpy(nic->product_name, &vpd_data[3], vpd_data[1]);
4918 * s2io_ethtool_geeprom - reads the value stored in the Eeprom.
4919 * @sp : private member of the device structure, which is a pointer to the * s2io_nic structure.
4920 * @eeprom : pointer to the user level structure provided by ethtool,
4921 * containing all relevant information.
4922 * @data_buf : user defined value to be written into Eeprom.
4923 * Description: Reads the values stored in the Eeprom at given offset
4924 * for a given length. Stores these values int the input argument data
4925 * buffer 'data_buf' and returns these to the caller (ethtool.)
4930 static int s2io_ethtool_geeprom(struct net_device *dev,
4931 struct ethtool_eeprom *eeprom, u8 * data_buf)
4935 struct s2io_nic *sp = dev->priv;
4937 eeprom->magic = sp->pdev->vendor | (sp->pdev->device << 16);
4939 if ((eeprom->offset + eeprom->len) > (XENA_EEPROM_SPACE))
4940 eeprom->len = XENA_EEPROM_SPACE - eeprom->offset;
4942 for (i = 0; i < eeprom->len; i += 4) {
4943 if (read_eeprom(sp, (eeprom->offset + i), &data)) {
4944 DBG_PRINT(ERR_DBG, "Read of EEPROM failed\n");
4948 memcpy((data_buf + i), &valid, 4);
4954 * s2io_ethtool_seeprom - tries to write the user provided value in Eeprom
4955 * @sp : private member of the device structure, which is a pointer to the
4956 * s2io_nic structure.
4957 * @eeprom : pointer to the user level structure provided by ethtool,
4958 * containing all relevant information.
4959 * @data_buf ; user defined value to be written into Eeprom.
4961 * Tries to write the user provided value in the Eeprom, at the offset
4962 * given by the user.
4964 * 0 on success, -EFAULT on failure.
4967 static int s2io_ethtool_seeprom(struct net_device *dev,
4968 struct ethtool_eeprom *eeprom,
4971 int len = eeprom->len, cnt = 0;
4972 u64 valid = 0, data;
4973 struct s2io_nic *sp = dev->priv;
4975 if (eeprom->magic != (sp->pdev->vendor | (sp->pdev->device << 16))) {
4977 "ETHTOOL_WRITE_EEPROM Err: Magic value ");
4978 DBG_PRINT(ERR_DBG, "is wrong, Its not 0x%x\n",
4984 data = (u32) data_buf[cnt] & 0x000000FF;
4986 valid = (u32) (data << 24);
4990 if (write_eeprom(sp, (eeprom->offset + cnt), valid, 0)) {
4992 "ETHTOOL_WRITE_EEPROM Err: Cannot ");
4994 "write into the specified offset\n");
5005 * s2io_register_test - reads and writes into all clock domains.
5006 * @sp : private member of the device structure, which is a pointer to the
5007 * s2io_nic structure.
5008 * @data : variable that returns the result of each of the test conducted b
5011 * Read and write into all clock domains. The NIC has 3 clock domains,
5012 * see that registers in all the three regions are accessible.
5017 static int s2io_register_test(struct s2io_nic * sp, uint64_t * data)
5019 struct XENA_dev_config __iomem *bar0 = sp->bar0;
5020 u64 val64 = 0, exp_val;
5023 val64 = readq(&bar0->pif_rd_swapper_fb);
5024 if (val64 != 0x123456789abcdefULL) {
5026 DBG_PRINT(INFO_DBG, "Read Test level 1 fails\n");
5029 val64 = readq(&bar0->rmac_pause_cfg);
5030 if (val64 != 0xc000ffff00000000ULL) {
5032 DBG_PRINT(INFO_DBG, "Read Test level 2 fails\n");
5035 val64 = readq(&bar0->rx_queue_cfg);
5036 if (sp->device_type == XFRAME_II_DEVICE)
5037 exp_val = 0x0404040404040404ULL;
5039 exp_val = 0x0808080808080808ULL;
5040 if (val64 != exp_val) {
5042 DBG_PRINT(INFO_DBG, "Read Test level 3 fails\n");
5045 val64 = readq(&bar0->xgxs_efifo_cfg);
5046 if (val64 != 0x000000001923141EULL) {
5048 DBG_PRINT(INFO_DBG, "Read Test level 4 fails\n");
5051 val64 = 0x5A5A5A5A5A5A5A5AULL;
5052 writeq(val64, &bar0->xmsi_data);
5053 val64 = readq(&bar0->xmsi_data);
5054 if (val64 != 0x5A5A5A5A5A5A5A5AULL) {
5056 DBG_PRINT(ERR_DBG, "Write Test level 1 fails\n");
5059 val64 = 0xA5A5A5A5A5A5A5A5ULL;
5060 writeq(val64, &bar0->xmsi_data);
5061 val64 = readq(&bar0->xmsi_data);
5062 if (val64 != 0xA5A5A5A5A5A5A5A5ULL) {
5064 DBG_PRINT(ERR_DBG, "Write Test level 2 fails\n");
5072 * s2io_eeprom_test - to verify that EEprom in the xena can be programmed.
5073 * @sp : private member of the device structure, which is a pointer to the
5074 * s2io_nic structure.
5075 * @data:variable that returns the result of each of the test conducted by
5078 * Verify that EEPROM in the xena can be programmed using I2C_CONTROL
5084 static int s2io_eeprom_test(struct s2io_nic * sp, uint64_t * data)
5087 u64 ret_data, org_4F0, org_7F0;
5088 u8 saved_4F0 = 0, saved_7F0 = 0;
5089 struct net_device *dev = sp->dev;
5091 /* Test Write Error at offset 0 */
5092 /* Note that SPI interface allows write access to all areas
5093 * of EEPROM. Hence doing all negative testing only for Xframe I.
5095 if (sp->device_type == XFRAME_I_DEVICE)
5096 if (!write_eeprom(sp, 0, 0, 3))
5099 /* Save current values at offsets 0x4F0 and 0x7F0 */
5100 if (!read_eeprom(sp, 0x4F0, &org_4F0))
5102 if (!read_eeprom(sp, 0x7F0, &org_7F0))
5105 /* Test Write at offset 4f0 */
5106 if (write_eeprom(sp, 0x4F0, 0x012345, 3))
5108 if (read_eeprom(sp, 0x4F0, &ret_data))
5111 if (ret_data != 0x012345) {
5112 DBG_PRINT(ERR_DBG, "%s: eeprom test error at offset 0x4F0. "
5113 "Data written %llx Data read %llx\n",
5114 dev->name, (unsigned long long)0x12345,
5115 (unsigned long long)ret_data);
5119 /* Reset the EEPROM data go FFFF */
5120 write_eeprom(sp, 0x4F0, 0xFFFFFF, 3);
5122 /* Test Write Request Error at offset 0x7c */
5123 if (sp->device_type == XFRAME_I_DEVICE)
5124 if (!write_eeprom(sp, 0x07C, 0, 3))
5127 /* Test Write Request at offset 0x7f0 */
5128 if (write_eeprom(sp, 0x7F0, 0x012345, 3))
5130 if (read_eeprom(sp, 0x7F0, &ret_data))
5133 if (ret_data != 0x012345) {
5134 DBG_PRINT(ERR_DBG, "%s: eeprom test error at offset 0x7F0. "
5135 "Data written %llx Data read %llx\n",
5136 dev->name, (unsigned long long)0x12345,
5137 (unsigned long long)ret_data);
5141 /* Reset the EEPROM data go FFFF */
5142 write_eeprom(sp, 0x7F0, 0xFFFFFF, 3);
5144 if (sp->device_type == XFRAME_I_DEVICE) {
5145 /* Test Write Error at offset 0x80 */
5146 if (!write_eeprom(sp, 0x080, 0, 3))
5149 /* Test Write Error at offset 0xfc */
5150 if (!write_eeprom(sp, 0x0FC, 0, 3))
5153 /* Test Write Error at offset 0x100 */
5154 if (!write_eeprom(sp, 0x100, 0, 3))
5157 /* Test Write Error at offset 4ec */
5158 if (!write_eeprom(sp, 0x4EC, 0, 3))
5162 /* Restore values at offsets 0x4F0 and 0x7F0 */
5164 write_eeprom(sp, 0x4F0, org_4F0, 3);
5166 write_eeprom(sp, 0x7F0, org_7F0, 3);
5173 * s2io_bist_test - invokes the MemBist test of the card .
5174 * @sp : private member of the device structure, which is a pointer to the
5175 * s2io_nic structure.
5176 * @data:variable that returns the result of each of the test conducted by
5179 * This invokes the MemBist test of the card. We give around
5180 * 2 secs time for the Test to complete. If it's still not complete
5181 * within this peiod, we consider that the test failed.
5183 * 0 on success and -1 on failure.
5186 static int s2io_bist_test(struct s2io_nic * sp, uint64_t * data)
5189 int cnt = 0, ret = -1;
5191 pci_read_config_byte(sp->pdev, PCI_BIST, &bist);
5192 bist |= PCI_BIST_START;
5193 pci_write_config_word(sp->pdev, PCI_BIST, bist);
5196 pci_read_config_byte(sp->pdev, PCI_BIST, &bist);
5197 if (!(bist & PCI_BIST_START)) {
5198 *data = (bist & PCI_BIST_CODE_MASK);
5210 * s2io-link_test - verifies the link state of the nic
5211 * @sp ; private member of the device structure, which is a pointer to the
5212 * s2io_nic structure.
5213 * @data: variable that returns the result of each of the test conducted by
5216 * The function verifies the link state of the NIC and updates the input
5217 * argument 'data' appropriately.
5222 static int s2io_link_test(struct s2io_nic * sp, uint64_t * data)
5224 struct XENA_dev_config __iomem *bar0 = sp->bar0;
5227 val64 = readq(&bar0->adapter_status);
5228 if(!(LINK_IS_UP(val64)))
5237 * s2io_rldram_test - offline test for access to the RldRam chip on the NIC
5238 * @sp - private member of the device structure, which is a pointer to the
5239 * s2io_nic structure.
5240 * @data - variable that returns the result of each of the test
5241 * conducted by the driver.
5243 * This is one of the offline test that tests the read and write
5244 * access to the RldRam chip on the NIC.
5249 static int s2io_rldram_test(struct s2io_nic * sp, uint64_t * data)
5251 struct XENA_dev_config __iomem *bar0 = sp->bar0;
5253 int cnt, iteration = 0, test_fail = 0;
5255 val64 = readq(&bar0->adapter_control);
5256 val64 &= ~ADAPTER_ECC_EN;
5257 writeq(val64, &bar0->adapter_control);
5259 val64 = readq(&bar0->mc_rldram_test_ctrl);
5260 val64 |= MC_RLDRAM_TEST_MODE;
5261 SPECIAL_REG_WRITE(val64, &bar0->mc_rldram_test_ctrl, LF);
5263 val64 = readq(&bar0->mc_rldram_mrs);
5264 val64 |= MC_RLDRAM_QUEUE_SIZE_ENABLE;
5265 SPECIAL_REG_WRITE(val64, &bar0->mc_rldram_mrs, UF);
5267 val64 |= MC_RLDRAM_MRS_ENABLE;
5268 SPECIAL_REG_WRITE(val64, &bar0->mc_rldram_mrs, UF);
5270 while (iteration < 2) {
5271 val64 = 0x55555555aaaa0000ULL;
5272 if (iteration == 1) {
5273 val64 ^= 0xFFFFFFFFFFFF0000ULL;
5275 writeq(val64, &bar0->mc_rldram_test_d0);
5277 val64 = 0xaaaa5a5555550000ULL;
5278 if (iteration == 1) {
5279 val64 ^= 0xFFFFFFFFFFFF0000ULL;
5281 writeq(val64, &bar0->mc_rldram_test_d1);
5283 val64 = 0x55aaaaaaaa5a0000ULL;
5284 if (iteration == 1) {
5285 val64 ^= 0xFFFFFFFFFFFF0000ULL;
5287 writeq(val64, &bar0->mc_rldram_test_d2);
5289 val64 = (u64) (0x0000003ffffe0100ULL);
5290 writeq(val64, &bar0->mc_rldram_test_add);
5292 val64 = MC_RLDRAM_TEST_MODE | MC_RLDRAM_TEST_WRITE |
5294 SPECIAL_REG_WRITE(val64, &bar0->mc_rldram_test_ctrl, LF);
5296 for (cnt = 0; cnt < 5; cnt++) {
5297 val64 = readq(&bar0->mc_rldram_test_ctrl);
5298 if (val64 & MC_RLDRAM_TEST_DONE)
5306 val64 = MC_RLDRAM_TEST_MODE | MC_RLDRAM_TEST_GO;
5307 SPECIAL_REG_WRITE(val64, &bar0->mc_rldram_test_ctrl, LF);
5309 for (cnt = 0; cnt < 5; cnt++) {
5310 val64 = readq(&bar0->mc_rldram_test_ctrl);
5311 if (val64 & MC_RLDRAM_TEST_DONE)
5319 val64 = readq(&bar0->mc_rldram_test_ctrl);
5320 if (!(val64 & MC_RLDRAM_TEST_PASS))
5328 /* Bring the adapter out of test mode */
5329 SPECIAL_REG_WRITE(0, &bar0->mc_rldram_test_ctrl, LF);
5335 * s2io_ethtool_test - conducts 6 tsets to determine the health of card.
5336 * @sp : private member of the device structure, which is a pointer to the
5337 * s2io_nic structure.
5338 * @ethtest : pointer to a ethtool command specific structure that will be
5339 * returned to the user.
5340 * @data : variable that returns the result of each of the test
5341 * conducted by the driver.
5343 * This function conducts 6 tests ( 4 offline and 2 online) to determine
5344 * the health of the card.
5349 static void s2io_ethtool_test(struct net_device *dev,
5350 struct ethtool_test *ethtest,
5353 struct s2io_nic *sp = dev->priv;
5354 int orig_state = netif_running(sp->dev);
5356 if (ethtest->flags == ETH_TEST_FL_OFFLINE) {
5357 /* Offline Tests. */
5359 s2io_close(sp->dev);
5361 if (s2io_register_test(sp, &data[0]))
5362 ethtest->flags |= ETH_TEST_FL_FAILED;
5366 if (s2io_rldram_test(sp, &data[3]))
5367 ethtest->flags |= ETH_TEST_FL_FAILED;
5371 if (s2io_eeprom_test(sp, &data[1]))
5372 ethtest->flags |= ETH_TEST_FL_FAILED;
5374 if (s2io_bist_test(sp, &data[4]))
5375 ethtest->flags |= ETH_TEST_FL_FAILED;
5385 "%s: is not up, cannot run test\n",
5394 if (s2io_link_test(sp, &data[2]))
5395 ethtest->flags |= ETH_TEST_FL_FAILED;
5404 static void s2io_get_ethtool_stats(struct net_device *dev,
5405 struct ethtool_stats *estats,
5409 struct s2io_nic *sp = dev->priv;
5410 struct stat_block *stat_info = sp->mac_control.stats_info;
5412 s2io_updt_stats(sp);
5414 (u64)le32_to_cpu(stat_info->tmac_frms_oflow) << 32 |
5415 le32_to_cpu(stat_info->tmac_frms);
5417 (u64)le32_to_cpu(stat_info->tmac_data_octets_oflow) << 32 |
5418 le32_to_cpu(stat_info->tmac_data_octets);
5419 tmp_stats[i++] = le64_to_cpu(stat_info->tmac_drop_frms);
5421 (u64)le32_to_cpu(stat_info->tmac_mcst_frms_oflow) << 32 |
5422 le32_to_cpu(stat_info->tmac_mcst_frms);
5424 (u64)le32_to_cpu(stat_info->tmac_bcst_frms_oflow) << 32 |
5425 le32_to_cpu(stat_info->tmac_bcst_frms);
5426 tmp_stats[i++] = le64_to_cpu(stat_info->tmac_pause_ctrl_frms);
5428 (u64)le32_to_cpu(stat_info->tmac_ttl_octets_oflow) << 32 |
5429 le32_to_cpu(stat_info->tmac_ttl_octets);
5431 (u64)le32_to_cpu(stat_info->tmac_ucst_frms_oflow) << 32 |
5432 le32_to_cpu(stat_info->tmac_ucst_frms);
5434 (u64)le32_to_cpu(stat_info->tmac_nucst_frms_oflow) << 32 |
5435 le32_to_cpu(stat_info->tmac_nucst_frms);
5437 (u64)le32_to_cpu(stat_info->tmac_any_err_frms_oflow) << 32 |
5438 le32_to_cpu(stat_info->tmac_any_err_frms);
5439 tmp_stats[i++] = le64_to_cpu(stat_info->tmac_ttl_less_fb_octets);
5440 tmp_stats[i++] = le64_to_cpu(stat_info->tmac_vld_ip_octets);
5442 (u64)le32_to_cpu(stat_info->tmac_vld_ip_oflow) << 32 |
5443 le32_to_cpu(stat_info->tmac_vld_ip);
5445 (u64)le32_to_cpu(stat_info->tmac_drop_ip_oflow) << 32 |
5446 le32_to_cpu(stat_info->tmac_drop_ip);
5448 (u64)le32_to_cpu(stat_info->tmac_icmp_oflow) << 32 |
5449 le32_to_cpu(stat_info->tmac_icmp);
5451 (u64)le32_to_cpu(stat_info->tmac_rst_tcp_oflow) << 32 |
5452 le32_to_cpu(stat_info->tmac_rst_tcp);
5453 tmp_stats[i++] = le64_to_cpu(stat_info->tmac_tcp);
5454 tmp_stats[i++] = (u64)le32_to_cpu(stat_info->tmac_udp_oflow) << 32 |
5455 le32_to_cpu(stat_info->tmac_udp);
5457 (u64)le32_to_cpu(stat_info->rmac_vld_frms_oflow) << 32 |
5458 le32_to_cpu(stat_info->rmac_vld_frms);
5460 (u64)le32_to_cpu(stat_info->rmac_data_octets_oflow) << 32 |
5461 le32_to_cpu(stat_info->rmac_data_octets);
5462 tmp_stats[i++] = le64_to_cpu(stat_info->rmac_fcs_err_frms);
5463 tmp_stats[i++] = le64_to_cpu(stat_info->rmac_drop_frms);
5465 (u64)le32_to_cpu(stat_info->rmac_vld_mcst_frms_oflow) << 32 |
5466 le32_to_cpu(stat_info->rmac_vld_mcst_frms);
5468 (u64)le32_to_cpu(stat_info->rmac_vld_bcst_frms_oflow) << 32 |
5469 le32_to_cpu(stat_info->rmac_vld_bcst_frms);
5470 tmp_stats[i++] = le32_to_cpu(stat_info->rmac_in_rng_len_err_frms);
5471 tmp_stats[i++] = le32_to_cpu(stat_info->rmac_out_rng_len_err_frms);
5472 tmp_stats[i++] = le64_to_cpu(stat_info->rmac_long_frms);
5473 tmp_stats[i++] = le64_to_cpu(stat_info->rmac_pause_ctrl_frms);
5474 tmp_stats[i++] = le64_to_cpu(stat_info->rmac_unsup_ctrl_frms);
5476 (u64)le32_to_cpu(stat_info->rmac_ttl_octets_oflow) << 32 |
5477 le32_to_cpu(stat_info->rmac_ttl_octets);
5479 (u64)le32_to_cpu(stat_info->rmac_accepted_ucst_frms_oflow)
5480 << 32 | le32_to_cpu(stat_info->rmac_accepted_ucst_frms);
5482 (u64)le32_to_cpu(stat_info->rmac_accepted_nucst_frms_oflow)
5483 << 32 | le32_to_cpu(stat_info->rmac_accepted_nucst_frms);
5485 (u64)le32_to_cpu(stat_info->rmac_discarded_frms_oflow) << 32 |
5486 le32_to_cpu(stat_info->rmac_discarded_frms);
5488 (u64)le32_to_cpu(stat_info->rmac_drop_events_oflow)
5489 << 32 | le32_to_cpu(stat_info->rmac_drop_events);
5490 tmp_stats[i++] = le64_to_cpu(stat_info->rmac_ttl_less_fb_octets);
5491 tmp_stats[i++] = le64_to_cpu(stat_info->rmac_ttl_frms);
5493 (u64)le32_to_cpu(stat_info->rmac_usized_frms_oflow) << 32 |
5494 le32_to_cpu(stat_info->rmac_usized_frms);
5496 (u64)le32_to_cpu(stat_info->rmac_osized_frms_oflow) << 32 |
5497 le32_to_cpu(stat_info->rmac_osized_frms);
5499 (u64)le32_to_cpu(stat_info->rmac_frag_frms_oflow) << 32 |
5500 le32_to_cpu(stat_info->rmac_frag_frms);
5502 (u64)le32_to_cpu(stat_info->rmac_jabber_frms_oflow) << 32 |
5503 le32_to_cpu(stat_info->rmac_jabber_frms);
5504 tmp_stats[i++] = le64_to_cpu(stat_info->rmac_ttl_64_frms);
5505 tmp_stats[i++] = le64_to_cpu(stat_info->rmac_ttl_65_127_frms);
5506 tmp_stats[i++] = le64_to_cpu(stat_info->rmac_ttl_128_255_frms);
5507 tmp_stats[i++] = le64_to_cpu(stat_info->rmac_ttl_256_511_frms);
5508 tmp_stats[i++] = le64_to_cpu(stat_info->rmac_ttl_512_1023_frms);
5509 tmp_stats[i++] = le64_to_cpu(stat_info->rmac_ttl_1024_1518_frms);
5511 (u64)le32_to_cpu(stat_info->rmac_ip_oflow) << 32 |
5512 le32_to_cpu(stat_info->rmac_ip);
5513 tmp_stats[i++] = le64_to_cpu(stat_info->rmac_ip_octets);
5514 tmp_stats[i++] = le32_to_cpu(stat_info->rmac_hdr_err_ip);
5516 (u64)le32_to_cpu(stat_info->rmac_drop_ip_oflow) << 32 |
5517 le32_to_cpu(stat_info->rmac_drop_ip);
5519 (u64)le32_to_cpu(stat_info->rmac_icmp_oflow) << 32 |
5520 le32_to_cpu(stat_info->rmac_icmp);
5521 tmp_stats[i++] = le64_to_cpu(stat_info->rmac_tcp);
5523 (u64)le32_to_cpu(stat_info->rmac_udp_oflow) << 32 |
5524 le32_to_cpu(stat_info->rmac_udp);
5526 (u64)le32_to_cpu(stat_info->rmac_err_drp_udp_oflow) << 32 |
5527 le32_to_cpu(stat_info->rmac_err_drp_udp);
5528 tmp_stats[i++] = le64_to_cpu(stat_info->rmac_xgmii_err_sym);
5529 tmp_stats[i++] = le64_to_cpu(stat_info->rmac_frms_q0);
5530 tmp_stats[i++] = le64_to_cpu(stat_info->rmac_frms_q1);
5531 tmp_stats[i++] = le64_to_cpu(stat_info->rmac_frms_q2);
5532 tmp_stats[i++] = le64_to_cpu(stat_info->rmac_frms_q3);
5533 tmp_stats[i++] = le64_to_cpu(stat_info->rmac_frms_q4);
5534 tmp_stats[i++] = le64_to_cpu(stat_info->rmac_frms_q5);
5535 tmp_stats[i++] = le64_to_cpu(stat_info->rmac_frms_q6);
5536 tmp_stats[i++] = le64_to_cpu(stat_info->rmac_frms_q7);
5537 tmp_stats[i++] = le16_to_cpu(stat_info->rmac_full_q0);
5538 tmp_stats[i++] = le16_to_cpu(stat_info->rmac_full_q1);
5539 tmp_stats[i++] = le16_to_cpu(stat_info->rmac_full_q2);
5540 tmp_stats[i++] = le16_to_cpu(stat_info->rmac_full_q3);
5541 tmp_stats[i++] = le16_to_cpu(stat_info->rmac_full_q4);
5542 tmp_stats[i++] = le16_to_cpu(stat_info->rmac_full_q5);
5543 tmp_stats[i++] = le16_to_cpu(stat_info->rmac_full_q6);
5544 tmp_stats[i++] = le16_to_cpu(stat_info->rmac_full_q7);
5546 (u64)le32_to_cpu(stat_info->rmac_pause_cnt_oflow) << 32 |
5547 le32_to_cpu(stat_info->rmac_pause_cnt);
5548 tmp_stats[i++] = le64_to_cpu(stat_info->rmac_xgmii_data_err_cnt);
5549 tmp_stats[i++] = le64_to_cpu(stat_info->rmac_xgmii_ctrl_err_cnt);
5551 (u64)le32_to_cpu(stat_info->rmac_accepted_ip_oflow) << 32 |
5552 le32_to_cpu(stat_info->rmac_accepted_ip);
5553 tmp_stats[i++] = le32_to_cpu(stat_info->rmac_err_tcp);
5554 tmp_stats[i++] = le32_to_cpu(stat_info->rd_req_cnt);
5555 tmp_stats[i++] = le32_to_cpu(stat_info->new_rd_req_cnt);
5556 tmp_stats[i++] = le32_to_cpu(stat_info->new_rd_req_rtry_cnt);
5557 tmp_stats[i++] = le32_to_cpu(stat_info->rd_rtry_cnt);
5558 tmp_stats[i++] = le32_to_cpu(stat_info->wr_rtry_rd_ack_cnt);
5559 tmp_stats[i++] = le32_to_cpu(stat_info->wr_req_cnt);
5560 tmp_stats[i++] = le32_to_cpu(stat_info->new_wr_req_cnt);
5561 tmp_stats[i++] = le32_to_cpu(stat_info->new_wr_req_rtry_cnt);
5562 tmp_stats[i++] = le32_to_cpu(stat_info->wr_rtry_cnt);
5563 tmp_stats[i++] = le32_to_cpu(stat_info->wr_disc_cnt);
5564 tmp_stats[i++] = le32_to_cpu(stat_info->rd_rtry_wr_ack_cnt);
5565 tmp_stats[i++] = le32_to_cpu(stat_info->txp_wr_cnt);
5566 tmp_stats[i++] = le32_to_cpu(stat_info->txd_rd_cnt);
5567 tmp_stats[i++] = le32_to_cpu(stat_info->txd_wr_cnt);
5568 tmp_stats[i++] = le32_to_cpu(stat_info->rxd_rd_cnt);
5569 tmp_stats[i++] = le32_to_cpu(stat_info->rxd_wr_cnt);
5570 tmp_stats[i++] = le32_to_cpu(stat_info->txf_rd_cnt);
5571 tmp_stats[i++] = le32_to_cpu(stat_info->rxf_wr_cnt);
5572 tmp_stats[i++] = le64_to_cpu(stat_info->rmac_ttl_1519_4095_frms);
5573 tmp_stats[i++] = le64_to_cpu(stat_info->rmac_ttl_4096_8191_frms);
5574 tmp_stats[i++] = le64_to_cpu(stat_info->rmac_ttl_8192_max_frms);
5575 tmp_stats[i++] = le64_to_cpu(stat_info->rmac_ttl_gt_max_frms);
5576 tmp_stats[i++] = le64_to_cpu(stat_info->rmac_osized_alt_frms);
5577 tmp_stats[i++] = le64_to_cpu(stat_info->rmac_jabber_alt_frms);
5578 tmp_stats[i++] = le64_to_cpu(stat_info->rmac_gt_max_alt_frms);
5579 tmp_stats[i++] = le64_to_cpu(stat_info->rmac_vlan_frms);
5580 tmp_stats[i++] = le32_to_cpu(stat_info->rmac_len_discard);
5581 tmp_stats[i++] = le32_to_cpu(stat_info->rmac_fcs_discard);
5582 tmp_stats[i++] = le32_to_cpu(stat_info->rmac_pf_discard);
5583 tmp_stats[i++] = le32_to_cpu(stat_info->rmac_da_discard);
5584 tmp_stats[i++] = le32_to_cpu(stat_info->rmac_red_discard);
5585 tmp_stats[i++] = le32_to_cpu(stat_info->rmac_rts_discard);
5586 tmp_stats[i++] = le32_to_cpu(stat_info->rmac_ingm_full_discard);
5587 tmp_stats[i++] = le32_to_cpu(stat_info->link_fault_cnt);
5589 tmp_stats[i++] = stat_info->sw_stat.single_ecc_errs;
5590 tmp_stats[i++] = stat_info->sw_stat.double_ecc_errs;
5591 tmp_stats[i++] = stat_info->sw_stat.parity_err_cnt;
5592 tmp_stats[i++] = stat_info->sw_stat.serious_err_cnt;
5593 tmp_stats[i++] = stat_info->sw_stat.soft_reset_cnt;
5594 tmp_stats[i++] = stat_info->sw_stat.fifo_full_cnt;
5595 tmp_stats[i++] = stat_info->sw_stat.ring_full_cnt;
5596 tmp_stats[i++] = stat_info->xpak_stat.alarm_transceiver_temp_high;
5597 tmp_stats[i++] = stat_info->xpak_stat.alarm_transceiver_temp_low;
5598 tmp_stats[i++] = stat_info->xpak_stat.alarm_laser_bias_current_high;
5599 tmp_stats[i++] = stat_info->xpak_stat.alarm_laser_bias_current_low;
5600 tmp_stats[i++] = stat_info->xpak_stat.alarm_laser_output_power_high;
5601 tmp_stats[i++] = stat_info->xpak_stat.alarm_laser_output_power_low;
5602 tmp_stats[i++] = stat_info->xpak_stat.warn_transceiver_temp_high;
5603 tmp_stats[i++] = stat_info->xpak_stat.warn_transceiver_temp_low;
5604 tmp_stats[i++] = stat_info->xpak_stat.warn_laser_bias_current_high;
5605 tmp_stats[i++] = stat_info->xpak_stat.warn_laser_bias_current_low;
5606 tmp_stats[i++] = stat_info->xpak_stat.warn_laser_output_power_high;
5607 tmp_stats[i++] = stat_info->xpak_stat.warn_laser_output_power_low;
5608 tmp_stats[i++] = stat_info->sw_stat.clubbed_frms_cnt;
5609 tmp_stats[i++] = stat_info->sw_stat.sending_both;
5610 tmp_stats[i++] = stat_info->sw_stat.outof_sequence_pkts;
5611 tmp_stats[i++] = stat_info->sw_stat.flush_max_pkts;
5612 if (stat_info->sw_stat.num_aggregations) {
5613 u64 tmp = stat_info->sw_stat.sum_avg_pkts_aggregated;
5616 * Since 64-bit divide does not work on all platforms,
5617 * do repeated subtraction.
5619 while (tmp >= stat_info->sw_stat.num_aggregations) {
5620 tmp -= stat_info->sw_stat.num_aggregations;
5623 tmp_stats[i++] = count;
5629 static int s2io_ethtool_get_regs_len(struct net_device *dev)
5631 return (XENA_REG_SPACE);
5635 static u32 s2io_ethtool_get_rx_csum(struct net_device * dev)
5637 struct s2io_nic *sp = dev->priv;
5639 return (sp->rx_csum);
5642 static int s2io_ethtool_set_rx_csum(struct net_device *dev, u32 data)
5644 struct s2io_nic *sp = dev->priv;
5654 static int s2io_get_eeprom_len(struct net_device *dev)
5656 return (XENA_EEPROM_SPACE);
5659 static int s2io_ethtool_self_test_count(struct net_device *dev)
5661 return (S2IO_TEST_LEN);
5664 static void s2io_ethtool_get_strings(struct net_device *dev,
5665 u32 stringset, u8 * data)
5667 switch (stringset) {
5669 memcpy(data, s2io_gstrings, S2IO_STRINGS_LEN);
5672 memcpy(data, ðtool_stats_keys,
5673 sizeof(ethtool_stats_keys));
5676 static int s2io_ethtool_get_stats_count(struct net_device *dev)
5678 return (S2IO_STAT_LEN);
5681 static int s2io_ethtool_op_set_tx_csum(struct net_device *dev, u32 data)
5684 dev->features |= NETIF_F_IP_CSUM;
5686 dev->features &= ~NETIF_F_IP_CSUM;
5691 static u32 s2io_ethtool_op_get_tso(struct net_device *dev)
5693 return (dev->features & NETIF_F_TSO) != 0;
5695 static int s2io_ethtool_op_set_tso(struct net_device *dev, u32 data)
5698 dev->features |= (NETIF_F_TSO | NETIF_F_TSO6);
5700 dev->features &= ~(NETIF_F_TSO | NETIF_F_TSO6);
5705 static const struct ethtool_ops netdev_ethtool_ops = {
5706 .get_settings = s2io_ethtool_gset,
5707 .set_settings = s2io_ethtool_sset,
5708 .get_drvinfo = s2io_ethtool_gdrvinfo,
5709 .get_regs_len = s2io_ethtool_get_regs_len,
5710 .get_regs = s2io_ethtool_gregs,
5711 .get_link = ethtool_op_get_link,
5712 .get_eeprom_len = s2io_get_eeprom_len,
5713 .get_eeprom = s2io_ethtool_geeprom,
5714 .set_eeprom = s2io_ethtool_seeprom,
5715 .get_pauseparam = s2io_ethtool_getpause_data,
5716 .set_pauseparam = s2io_ethtool_setpause_data,
5717 .get_rx_csum = s2io_ethtool_get_rx_csum,
5718 .set_rx_csum = s2io_ethtool_set_rx_csum,
5719 .get_tx_csum = ethtool_op_get_tx_csum,
5720 .set_tx_csum = s2io_ethtool_op_set_tx_csum,
5721 .get_sg = ethtool_op_get_sg,
5722 .set_sg = ethtool_op_set_sg,
5723 .get_tso = s2io_ethtool_op_get_tso,
5724 .set_tso = s2io_ethtool_op_set_tso,
5725 .get_ufo = ethtool_op_get_ufo,
5726 .set_ufo = ethtool_op_set_ufo,
5727 .self_test_count = s2io_ethtool_self_test_count,
5728 .self_test = s2io_ethtool_test,
5729 .get_strings = s2io_ethtool_get_strings,
5730 .phys_id = s2io_ethtool_idnic,
5731 .get_stats_count = s2io_ethtool_get_stats_count,
5732 .get_ethtool_stats = s2io_get_ethtool_stats
5736 * s2io_ioctl - Entry point for the Ioctl
5737 * @dev : Device pointer.
5738 * @ifr : An IOCTL specefic structure, that can contain a pointer to
5739 * a proprietary structure used to pass information to the driver.
5740 * @cmd : This is used to distinguish between the different commands that
5741 * can be passed to the IOCTL functions.
5743 * Currently there are no special functionality supported in IOCTL, hence
5744 * function always return EOPNOTSUPPORTED
5747 static int s2io_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
5753 * s2io_change_mtu - entry point to change MTU size for the device.
5754 * @dev : device pointer.
5755 * @new_mtu : the new MTU size for the device.
5756 * Description: A driver entry point to change MTU size for the device.
5757 * Before changing the MTU the device must be stopped.
5759 * 0 on success and an appropriate (-)ve integer as defined in errno.h
5763 static int s2io_change_mtu(struct net_device *dev, int new_mtu)
5765 struct s2io_nic *sp = dev->priv;
5767 if ((new_mtu < MIN_MTU) || (new_mtu > S2IO_JUMBO_SIZE)) {
5768 DBG_PRINT(ERR_DBG, "%s: MTU size is invalid.\n",
5774 if (netif_running(dev)) {
5776 netif_stop_queue(dev);
5777 if (s2io_card_up(sp)) {
5778 DBG_PRINT(ERR_DBG, "%s: Device bring up failed\n",
5781 if (netif_queue_stopped(dev))
5782 netif_wake_queue(dev);
5783 } else { /* Device is down */
5784 struct XENA_dev_config __iomem *bar0 = sp->bar0;
5785 u64 val64 = new_mtu;
5787 writeq(vBIT(val64, 2, 14), &bar0->rmac_max_pyld_len);
5794 * s2io_tasklet - Bottom half of the ISR.
5795 * @dev_adr : address of the device structure in dma_addr_t format.
5797 * This is the tasklet or the bottom half of the ISR. This is
5798 * an extension of the ISR which is scheduled by the scheduler to be run
5799 * when the load on the CPU is low. All low priority tasks of the ISR can
5800 * be pushed into the tasklet. For now the tasklet is used only to
5801 * replenish the Rx buffers in the Rx buffer descriptors.
5806 static void s2io_tasklet(unsigned long dev_addr)
5808 struct net_device *dev = (struct net_device *) dev_addr;
5809 struct s2io_nic *sp = dev->priv;
5811 struct mac_info *mac_control;
5812 struct config_param *config;
5814 mac_control = &sp->mac_control;
5815 config = &sp->config;
5817 if (!TASKLET_IN_USE) {
5818 for (i = 0; i < config->rx_ring_num; i++) {
5819 ret = fill_rx_buffers(sp, i);
5820 if (ret == -ENOMEM) {
5821 DBG_PRINT(ERR_DBG, "%s: Out of ",
5823 DBG_PRINT(ERR_DBG, "memory in tasklet\n");
5825 } else if (ret == -EFILL) {
5827 "%s: Rx Ring %d is full\n",
5832 clear_bit(0, (&sp->tasklet_status));
5837 * s2io_set_link - Set the LInk status
5838 * @data: long pointer to device private structue
5839 * Description: Sets the link status for the adapter
5842 static void s2io_set_link(struct work_struct *work)
5844 struct s2io_nic *nic = container_of(work, struct s2io_nic, set_link_task);
5845 struct net_device *dev = nic->dev;
5846 struct XENA_dev_config __iomem *bar0 = nic->bar0;
5850 if (test_and_set_bit(0, &(nic->link_state))) {
5851 /* The card is being reset, no point doing anything */
5855 subid = nic->pdev->subsystem_device;
5856 if (s2io_link_fault_indication(nic) == MAC_RMAC_ERR_TIMER) {
5858 * Allow a small delay for the NICs self initiated
5859 * cleanup to complete.
5864 val64 = readq(&bar0->adapter_status);
5865 if (LINK_IS_UP(val64)) {
5866 if (!(readq(&bar0->adapter_control) & ADAPTER_CNTL_EN)) {
5867 if (verify_xena_quiescence(nic)) {
5868 val64 = readq(&bar0->adapter_control);
5869 val64 |= ADAPTER_CNTL_EN;
5870 writeq(val64, &bar0->adapter_control);
5871 if (CARDS_WITH_FAULTY_LINK_INDICATORS(
5872 nic->device_type, subid)) {
5873 val64 = readq(&bar0->gpio_control);
5874 val64 |= GPIO_CTRL_GPIO_0;
5875 writeq(val64, &bar0->gpio_control);
5876 val64 = readq(&bar0->gpio_control);
5878 val64 |= ADAPTER_LED_ON;
5879 writeq(val64, &bar0->adapter_control);
5881 nic->device_enabled_once = TRUE;
5883 DBG_PRINT(ERR_DBG, "%s: Error: ", dev->name);
5884 DBG_PRINT(ERR_DBG, "device is not Quiescent\n");
5885 netif_stop_queue(dev);
5888 val64 = readq(&bar0->adapter_status);
5889 if (!LINK_IS_UP(val64)) {
5890 DBG_PRINT(ERR_DBG, "%s:", dev->name);
5891 DBG_PRINT(ERR_DBG, " Link down after enabling ");
5892 DBG_PRINT(ERR_DBG, "device \n");
5894 s2io_link(nic, LINK_UP);
5896 if (CARDS_WITH_FAULTY_LINK_INDICATORS(nic->device_type,
5898 val64 = readq(&bar0->gpio_control);
5899 val64 &= ~GPIO_CTRL_GPIO_0;
5900 writeq(val64, &bar0->gpio_control);
5901 val64 = readq(&bar0->gpio_control);
5903 s2io_link(nic, LINK_DOWN);
5905 clear_bit(0, &(nic->link_state));
5908 static int set_rxd_buffer_pointer(struct s2io_nic *sp, struct RxD_t *rxdp,
5910 struct sk_buff **skb, u64 *temp0, u64 *temp1,
5911 u64 *temp2, int size)
5913 struct net_device *dev = sp->dev;
5914 struct sk_buff *frag_list;
5916 if ((sp->rxd_mode == RXD_MODE_1) && (rxdp->Host_Control == 0)) {
5919 DBG_PRINT(INFO_DBG, "SKB is not NULL\n");
5921 * As Rx frame are not going to be processed,
5922 * using same mapped address for the Rxd
5925 ((struct RxD1*)rxdp)->Buffer0_ptr = *temp0;
5927 *skb = dev_alloc_skb(size);
5929 DBG_PRINT(ERR_DBG, "%s: Out of ", dev->name);
5930 DBG_PRINT(ERR_DBG, "memory to allocate SKBs\n");
5933 /* storing the mapped addr in a temp variable
5934 * such it will be used for next rxd whose
5935 * Host Control is NULL
5937 ((struct RxD1*)rxdp)->Buffer0_ptr = *temp0 =
5938 pci_map_single( sp->pdev, (*skb)->data,
5939 size - NET_IP_ALIGN,
5940 PCI_DMA_FROMDEVICE);
5941 rxdp->Host_Control = (unsigned long) (*skb);
5943 } else if ((sp->rxd_mode == RXD_MODE_3B) && (rxdp->Host_Control == 0)) {
5944 /* Two buffer Mode */
5946 ((struct RxD3*)rxdp)->Buffer2_ptr = *temp2;
5947 ((struct RxD3*)rxdp)->Buffer0_ptr = *temp0;
5948 ((struct RxD3*)rxdp)->Buffer1_ptr = *temp1;
5950 *skb = dev_alloc_skb(size);
5952 DBG_PRINT(ERR_DBG, "%s: dev_alloc_skb failed\n",
5956 ((struct RxD3*)rxdp)->Buffer2_ptr = *temp2 =
5957 pci_map_single(sp->pdev, (*skb)->data,
5959 PCI_DMA_FROMDEVICE);
5960 ((struct RxD3*)rxdp)->Buffer0_ptr = *temp0 =
5961 pci_map_single( sp->pdev, ba->ba_0, BUF0_LEN,
5962 PCI_DMA_FROMDEVICE);
5963 rxdp->Host_Control = (unsigned long) (*skb);
5965 /* Buffer-1 will be dummy buffer not used */
5966 ((struct RxD3*)rxdp)->Buffer1_ptr = *temp1 =
5967 pci_map_single(sp->pdev, ba->ba_1, BUF1_LEN,
5968 PCI_DMA_FROMDEVICE);
5970 } else if ((rxdp->Host_Control == 0)) {
5971 /* Three buffer mode */
5973 ((struct RxD3*)rxdp)->Buffer0_ptr = *temp0;
5974 ((struct RxD3*)rxdp)->Buffer1_ptr = *temp1;
5975 ((struct RxD3*)rxdp)->Buffer2_ptr = *temp2;
5977 *skb = dev_alloc_skb(size);
5979 DBG_PRINT(ERR_DBG, "%s: dev_alloc_skb failed\n",
5983 ((struct RxD3*)rxdp)->Buffer0_ptr = *temp0 =
5984 pci_map_single(sp->pdev, ba->ba_0, BUF0_LEN,
5985 PCI_DMA_FROMDEVICE);
5986 /* Buffer-1 receives L3/L4 headers */
5987 ((struct RxD3*)rxdp)->Buffer1_ptr = *temp1 =
5988 pci_map_single( sp->pdev, (*skb)->data,
5990 PCI_DMA_FROMDEVICE);
5992 * skb_shinfo(skb)->frag_list will have L4
5995 skb_shinfo(*skb)->frag_list = dev_alloc_skb(dev->mtu +
5997 if (skb_shinfo(*skb)->frag_list == NULL) {
5998 DBG_PRINT(ERR_DBG, "%s: dev_alloc_skb \
5999 failed\n ", dev->name);
6002 frag_list = skb_shinfo(*skb)->frag_list;
6003 frag_list->next = NULL;
6005 * Buffer-2 receives L4 data payload
6007 ((struct RxD3*)rxdp)->Buffer2_ptr = *temp2 =
6008 pci_map_single( sp->pdev, frag_list->data,
6009 dev->mtu, PCI_DMA_FROMDEVICE);
6014 static void set_rxd_buffer_size(struct s2io_nic *sp, struct RxD_t *rxdp,
6017 struct net_device *dev = sp->dev;
6018 if (sp->rxd_mode == RXD_MODE_1) {
6019 rxdp->Control_2 = SET_BUFFER0_SIZE_1( size - NET_IP_ALIGN);
6020 } else if (sp->rxd_mode == RXD_MODE_3B) {
6021 rxdp->Control_2 = SET_BUFFER0_SIZE_3(BUF0_LEN);
6022 rxdp->Control_2 |= SET_BUFFER1_SIZE_3(1);
6023 rxdp->Control_2 |= SET_BUFFER2_SIZE_3( dev->mtu + 4);
6025 rxdp->Control_2 = SET_BUFFER0_SIZE_3(BUF0_LEN);
6026 rxdp->Control_2 |= SET_BUFFER1_SIZE_3(l3l4hdr_size + 4);
6027 rxdp->Control_2 |= SET_BUFFER2_SIZE_3(dev->mtu);
6031 static int rxd_owner_bit_reset(struct s2io_nic *sp)
6033 int i, j, k, blk_cnt = 0, size;
6034 struct mac_info * mac_control = &sp->mac_control;
6035 struct config_param *config = &sp->config;
6036 struct net_device *dev = sp->dev;
6037 struct RxD_t *rxdp = NULL;
6038 struct sk_buff *skb = NULL;
6039 struct buffAdd *ba = NULL;
6040 u64 temp0_64 = 0, temp1_64 = 0, temp2_64 = 0;
6042 /* Calculate the size based on ring mode */
6043 size = dev->mtu + HEADER_ETHERNET_II_802_3_SIZE +
6044 HEADER_802_2_SIZE + HEADER_SNAP_SIZE;
6045 if (sp->rxd_mode == RXD_MODE_1)
6046 size += NET_IP_ALIGN;
6047 else if (sp->rxd_mode == RXD_MODE_3B)
6048 size = dev->mtu + ALIGN_SIZE + BUF0_LEN + 4;
6050 size = l3l4hdr_size + ALIGN_SIZE + BUF0_LEN + 4;
6052 for (i = 0; i < config->rx_ring_num; i++) {
6053 blk_cnt = config->rx_cfg[i].num_rxd /
6054 (rxd_count[sp->rxd_mode] +1);
6056 for (j = 0; j < blk_cnt; j++) {
6057 for (k = 0; k < rxd_count[sp->rxd_mode]; k++) {
6058 rxdp = mac_control->rings[i].
6059 rx_blocks[j].rxds[k].virt_addr;
6060 if(sp->rxd_mode >= RXD_MODE_3A)
6061 ba = &mac_control->rings[i].ba[j][k];
6062 set_rxd_buffer_pointer(sp, rxdp, ba,
6063 &skb,(u64 *)&temp0_64,
6065 (u64 *)&temp2_64, size);
6067 set_rxd_buffer_size(sp, rxdp, size);
6069 /* flip the Ownership bit to Hardware */
6070 rxdp->Control_1 |= RXD_OWN_XENA;
6078 static int s2io_add_isr(struct s2io_nic * sp)
6081 struct net_device *dev = sp->dev;
6084 if (sp->intr_type == MSI)
6085 ret = s2io_enable_msi(sp);
6086 else if (sp->intr_type == MSI_X)
6087 ret = s2io_enable_msi_x(sp);
6089 DBG_PRINT(ERR_DBG, "%s: Defaulting to INTA\n", dev->name);
6090 sp->intr_type = INTA;
6093 /* Store the values of the MSIX table in the struct s2io_nic structure */
6094 store_xmsi_data(sp);
6096 /* After proper initialization of H/W, register ISR */
6097 if (sp->intr_type == MSI) {
6098 err = request_irq((int) sp->pdev->irq, s2io_msi_handle,
6099 IRQF_SHARED, sp->name, dev);
6101 pci_disable_msi(sp->pdev);
6102 DBG_PRINT(ERR_DBG, "%s: MSI registration failed\n",
6107 if (sp->intr_type == MSI_X) {
6110 for (i=1; (sp->s2io_entries[i].in_use == MSIX_FLG); i++) {
6111 if (sp->s2io_entries[i].type == MSIX_FIFO_TYPE) {
6112 sprintf(sp->desc[i], "%s:MSI-X-%d-TX",
6114 err = request_irq(sp->entries[i].vector,
6115 s2io_msix_fifo_handle, 0, sp->desc[i],
6116 sp->s2io_entries[i].arg);
6117 DBG_PRINT(ERR_DBG, "%s @ 0x%llx\n", sp->desc[i],
6118 (unsigned long long)sp->msix_info[i].addr);
6120 sprintf(sp->desc[i], "%s:MSI-X-%d-RX",
6122 err = request_irq(sp->entries[i].vector,
6123 s2io_msix_ring_handle, 0, sp->desc[i],
6124 sp->s2io_entries[i].arg);
6125 DBG_PRINT(ERR_DBG, "%s @ 0x%llx\n", sp->desc[i],
6126 (unsigned long long)sp->msix_info[i].addr);
6129 DBG_PRINT(ERR_DBG,"%s:MSI-X-%d registration "
6130 "failed\n", dev->name, i);
6131 DBG_PRINT(ERR_DBG, "Returned: %d\n", err);
6134 sp->s2io_entries[i].in_use = MSIX_REGISTERED_SUCCESS;
6137 if (sp->intr_type == INTA) {
6138 err = request_irq((int) sp->pdev->irq, s2io_isr, IRQF_SHARED,
6141 DBG_PRINT(ERR_DBG, "%s: ISR registration failed\n",
6148 static void s2io_rem_isr(struct s2io_nic * sp)
6151 struct net_device *dev = sp->dev;
6153 if (sp->intr_type == MSI_X) {
6157 for (i=1; (sp->s2io_entries[i].in_use ==
6158 MSIX_REGISTERED_SUCCESS); i++) {
6159 int vector = sp->entries[i].vector;
6160 void *arg = sp->s2io_entries[i].arg;
6162 free_irq(vector, arg);
6164 pci_read_config_word(sp->pdev, 0x42, &msi_control);
6165 msi_control &= 0xFFFE; /* Disable MSI */
6166 pci_write_config_word(sp->pdev, 0x42, msi_control);
6168 pci_disable_msix(sp->pdev);
6170 free_irq(sp->pdev->irq, dev);
6171 if (sp->intr_type == MSI) {
6174 pci_disable_msi(sp->pdev);
6175 pci_read_config_word(sp->pdev, 0x4c, &val);
6177 pci_write_config_word(sp->pdev, 0x4c, val);
6180 /* Waiting till all Interrupt handlers are complete */
6184 if (!atomic_read(&sp->isr_cnt))
6190 static void s2io_card_down(struct s2io_nic * sp)
6193 struct XENA_dev_config __iomem *bar0 = sp->bar0;
6194 unsigned long flags;
6195 register u64 val64 = 0;
6197 del_timer_sync(&sp->alarm_timer);
6198 /* If s2io_set_link task is executing, wait till it completes. */
6199 while (test_and_set_bit(0, &(sp->link_state))) {
6202 atomic_set(&sp->card_state, CARD_DOWN);
6204 /* disable Tx and Rx traffic on the NIC */
6210 tasklet_kill(&sp->task);
6212 /* Check if the device is Quiescent and then Reset the NIC */
6214 /* As per the HW requirement we need to replenish the
6215 * receive buffer to avoid the ring bump. Since there is
6216 * no intention of processing the Rx frame at this pointwe are
6217 * just settting the ownership bit of rxd in Each Rx
6218 * ring to HW and set the appropriate buffer size
6219 * based on the ring mode
6221 rxd_owner_bit_reset(sp);
6223 val64 = readq(&bar0->adapter_status);
6224 if (verify_xena_quiescence(sp)) {
6225 if(verify_pcc_quiescent(sp, sp->device_enabled_once))
6233 "s2io_close:Device not Quiescent ");
6234 DBG_PRINT(ERR_DBG, "adaper status reads 0x%llx\n",
6235 (unsigned long long) val64);
6241 spin_lock_irqsave(&sp->tx_lock, flags);
6242 /* Free all Tx buffers */
6243 free_tx_buffers(sp);
6244 spin_unlock_irqrestore(&sp->tx_lock, flags);
6246 /* Free all Rx buffers */
6247 spin_lock_irqsave(&sp->rx_lock, flags);
6248 free_rx_buffers(sp);
6249 spin_unlock_irqrestore(&sp->rx_lock, flags);
6251 clear_bit(0, &(sp->link_state));
6254 static int s2io_card_up(struct s2io_nic * sp)
6257 struct mac_info *mac_control;
6258 struct config_param *config;
6259 struct net_device *dev = (struct net_device *) sp->dev;
6262 /* Initialize the H/W I/O registers */
6263 if (init_nic(sp) != 0) {
6264 DBG_PRINT(ERR_DBG, "%s: H/W initialization failed\n",
6271 * Initializing the Rx buffers. For now we are considering only 1
6272 * Rx ring and initializing buffers into 30 Rx blocks
6274 mac_control = &sp->mac_control;
6275 config = &sp->config;
6277 for (i = 0; i < config->rx_ring_num; i++) {
6278 if ((ret = fill_rx_buffers(sp, i))) {
6279 DBG_PRINT(ERR_DBG, "%s: Out of memory in Open\n",
6282 free_rx_buffers(sp);
6285 DBG_PRINT(INFO_DBG, "Buf in ring:%d is %d:\n", i,
6286 atomic_read(&sp->rx_bufs_left[i]));
6288 /* Maintain the state prior to the open */
6289 if (sp->promisc_flg)
6290 sp->promisc_flg = 0;
6291 if (sp->m_cast_flg) {
6293 sp->all_multi_pos= 0;
6296 /* Setting its receive mode */
6297 s2io_set_multicast(dev);
6300 /* Initialize max aggregatable pkts per session based on MTU */
6301 sp->lro_max_aggr_per_sess = ((1<<16) - 1) / dev->mtu;
6302 /* Check if we can use(if specified) user provided value */
6303 if (lro_max_pkts < sp->lro_max_aggr_per_sess)
6304 sp->lro_max_aggr_per_sess = lro_max_pkts;
6307 /* Enable Rx Traffic and interrupts on the NIC */
6308 if (start_nic(sp)) {
6309 DBG_PRINT(ERR_DBG, "%s: Starting NIC failed\n", dev->name);
6311 free_rx_buffers(sp);
6315 /* Add interrupt service routine */
6316 if (s2io_add_isr(sp) != 0) {
6317 if (sp->intr_type == MSI_X)
6320 free_rx_buffers(sp);
6324 S2IO_TIMER_CONF(sp->alarm_timer, s2io_alarm_handle, sp, (HZ/2));
6326 /* Enable tasklet for the device */
6327 tasklet_init(&sp->task, s2io_tasklet, (unsigned long) dev);
6329 /* Enable select interrupts */
6330 if (sp->intr_type != INTA)
6331 en_dis_able_nic_intrs(sp, ENA_ALL_INTRS, DISABLE_INTRS);
6333 interruptible = TX_TRAFFIC_INTR | RX_TRAFFIC_INTR;
6334 interruptible |= TX_PIC_INTR | RX_PIC_INTR;
6335 interruptible |= TX_MAC_INTR | RX_MAC_INTR;
6336 en_dis_able_nic_intrs(sp, interruptible, ENABLE_INTRS);
6340 atomic_set(&sp->card_state, CARD_UP);
6345 * s2io_restart_nic - Resets the NIC.
6346 * @data : long pointer to the device private structure
6348 * This function is scheduled to be run by the s2io_tx_watchdog
6349 * function after 0.5 secs to reset the NIC. The idea is to reduce
6350 * the run time of the watch dog routine which is run holding a
6354 static void s2io_restart_nic(struct work_struct *work)
6356 struct s2io_nic *sp = container_of(work, struct s2io_nic, rst_timer_task);
6357 struct net_device *dev = sp->dev;
6360 if (s2io_card_up(sp)) {
6361 DBG_PRINT(ERR_DBG, "%s: Device bring up failed\n",
6364 netif_wake_queue(dev);
6365 DBG_PRINT(ERR_DBG, "%s: was reset by Tx watchdog timer\n",
6371 * s2io_tx_watchdog - Watchdog for transmit side.
6372 * @dev : Pointer to net device structure
6374 * This function is triggered if the Tx Queue is stopped
6375 * for a pre-defined amount of time when the Interface is still up.
6376 * If the Interface is jammed in such a situation, the hardware is
6377 * reset (by s2io_close) and restarted again (by s2io_open) to
6378 * overcome any problem that might have been caused in the hardware.
6383 static void s2io_tx_watchdog(struct net_device *dev)
6385 struct s2io_nic *sp = dev->priv;
6387 if (netif_carrier_ok(dev)) {
6388 schedule_work(&sp->rst_timer_task);
6389 sp->mac_control.stats_info->sw_stat.soft_reset_cnt++;
6394 * rx_osm_handler - To perform some OS related operations on SKB.
6395 * @sp: private member of the device structure,pointer to s2io_nic structure.
6396 * @skb : the socket buffer pointer.
6397 * @len : length of the packet
6398 * @cksum : FCS checksum of the frame.
6399 * @ring_no : the ring from which this RxD was extracted.
6401 * This function is called by the Rx interrupt serivce routine to perform
6402 * some OS related operations on the SKB before passing it to the upper
6403 * layers. It mainly checks if the checksum is OK, if so adds it to the
6404 * SKBs cksum variable, increments the Rx packet count and passes the SKB
6405 * to the upper layer. If the checksum is wrong, it increments the Rx
6406 * packet error count, frees the SKB and returns error.
6408 * SUCCESS on success and -1 on failure.
6410 static int rx_osm_handler(struct ring_info *ring_data, struct RxD_t * rxdp)
6412 struct s2io_nic *sp = ring_data->nic;
6413 struct net_device *dev = (struct net_device *) sp->dev;
6414 struct sk_buff *skb = (struct sk_buff *)
6415 ((unsigned long) rxdp->Host_Control);
6416 int ring_no = ring_data->ring_no;
6417 u16 l3_csum, l4_csum;
6418 unsigned long long err = rxdp->Control_1 & RXD_T_CODE;
6424 /* Check for parity error */
6426 sp->mac_control.stats_info->sw_stat.parity_err_cnt++;
6430 * Drop the packet if bad transfer code. Exception being
6431 * 0x5, which could be due to unsupported IPv6 extension header.
6432 * In this case, we let stack handle the packet.
6433 * Note that in this case, since checksum will be incorrect,
6434 * stack will validate the same.
6436 if (err && ((err >> 48) != 0x5)) {
6437 DBG_PRINT(ERR_DBG, "%s: Rx error Value: 0x%llx\n",
6439 sp->stats.rx_crc_errors++;
6441 atomic_dec(&sp->rx_bufs_left[ring_no]);
6442 rxdp->Host_Control = 0;
6447 /* Updating statistics */
6448 rxdp->Host_Control = 0;
6450 sp->stats.rx_packets++;
6451 if (sp->rxd_mode == RXD_MODE_1) {
6452 int len = RXD_GET_BUFFER0_SIZE_1(rxdp->Control_2);
6454 sp->stats.rx_bytes += len;
6457 } else if (sp->rxd_mode >= RXD_MODE_3A) {
6458 int get_block = ring_data->rx_curr_get_info.block_index;
6459 int get_off = ring_data->rx_curr_get_info.offset;
6460 int buf0_len = RXD_GET_BUFFER0_SIZE_3(rxdp->Control_2);
6461 int buf2_len = RXD_GET_BUFFER2_SIZE_3(rxdp->Control_2);
6462 unsigned char *buff = skb_push(skb, buf0_len);
6464 struct buffAdd *ba = &ring_data->ba[get_block][get_off];
6465 sp->stats.rx_bytes += buf0_len + buf2_len;
6466 memcpy(buff, ba->ba_0, buf0_len);
6468 if (sp->rxd_mode == RXD_MODE_3A) {
6469 int buf1_len = RXD_GET_BUFFER1_SIZE_3(rxdp->Control_2);
6471 skb_put(skb, buf1_len);
6472 skb->len += buf2_len;
6473 skb->data_len += buf2_len;
6474 skb_put(skb_shinfo(skb)->frag_list, buf2_len);
6475 sp->stats.rx_bytes += buf1_len;
6478 skb_put(skb, buf2_len);
6481 if ((rxdp->Control_1 & TCP_OR_UDP_FRAME) && ((!sp->lro) ||
6482 (sp->lro && (!(rxdp->Control_1 & RXD_FRAME_IP_FRAG)))) &&
6484 l3_csum = RXD_GET_L3_CKSUM(rxdp->Control_1);
6485 l4_csum = RXD_GET_L4_CKSUM(rxdp->Control_1);
6486 if ((l3_csum == L3_CKSUM_OK) && (l4_csum == L4_CKSUM_OK)) {
6488 * NIC verifies if the Checksum of the received
6489 * frame is Ok or not and accordingly returns
6490 * a flag in the RxD.
6492 skb->ip_summed = CHECKSUM_UNNECESSARY;
6498 ret = s2io_club_tcp_session(skb->data, &tcp,
6499 &tcp_len, &lro, rxdp, sp);
6501 case 3: /* Begin anew */
6504 case 1: /* Aggregate */
6506 lro_append_pkt(sp, lro,
6510 case 4: /* Flush session */
6512 lro_append_pkt(sp, lro,
6514 queue_rx_frame(lro->parent);
6515 clear_lro_session(lro);
6516 sp->mac_control.stats_info->
6517 sw_stat.flush_max_pkts++;
6520 case 2: /* Flush both */
6521 lro->parent->data_len =
6523 sp->mac_control.stats_info->
6524 sw_stat.sending_both++;
6525 queue_rx_frame(lro->parent);
6526 clear_lro_session(lro);
6528 case 0: /* sessions exceeded */
6529 case -1: /* non-TCP or not
6533 * First pkt in session not
6534 * L3/L4 aggregatable
6539 "%s: Samadhana!!\n",
6546 * Packet with erroneous checksum, let the
6547 * upper layers deal with it.
6549 skb->ip_summed = CHECKSUM_NONE;
6552 skb->ip_summed = CHECKSUM_NONE;
6556 skb->protocol = eth_type_trans(skb, dev);
6557 if (sp->vlgrp && RXD_GET_VLAN_TAG(rxdp->Control_2)) {
6558 /* Queueing the vlan frame to the upper layer */
6560 vlan_hwaccel_receive_skb(skb, sp->vlgrp,
6561 RXD_GET_VLAN_TAG(rxdp->Control_2));
6563 vlan_hwaccel_rx(skb, sp->vlgrp,
6564 RXD_GET_VLAN_TAG(rxdp->Control_2));
6567 netif_receive_skb(skb);
6573 queue_rx_frame(skb);
6575 dev->last_rx = jiffies;
6577 atomic_dec(&sp->rx_bufs_left[ring_no]);
6582 * s2io_link - stops/starts the Tx queue.
6583 * @sp : private member of the device structure, which is a pointer to the
6584 * s2io_nic structure.
6585 * @link : inidicates whether link is UP/DOWN.
6587 * This function stops/starts the Tx queue depending on whether the link
6588 * status of the NIC is is down or up. This is called by the Alarm
6589 * interrupt handler whenever a link change interrupt comes up.
6594 static void s2io_link(struct s2io_nic * sp, int link)
6596 struct net_device *dev = (struct net_device *) sp->dev;
6598 if (link != sp->last_link_state) {
6599 if (link == LINK_DOWN) {
6600 DBG_PRINT(ERR_DBG, "%s: Link down\n", dev->name);
6601 netif_carrier_off(dev);
6603 DBG_PRINT(ERR_DBG, "%s: Link Up\n", dev->name);
6604 netif_carrier_on(dev);
6607 sp->last_link_state = link;
6611 * get_xena_rev_id - to identify revision ID of xena.
6612 * @pdev : PCI Dev structure
6614 * Function to identify the Revision ID of xena.
6616 * returns the revision ID of the device.
6619 static int get_xena_rev_id(struct pci_dev *pdev)
6623 ret = pci_read_config_byte(pdev, PCI_REVISION_ID, (u8 *) & id);
6628 * s2io_init_pci -Initialization of PCI and PCI-X configuration registers .
6629 * @sp : private member of the device structure, which is a pointer to the
6630 * s2io_nic structure.
6632 * This function initializes a few of the PCI and PCI-X configuration registers
6633 * with recommended values.
6638 static void s2io_init_pci(struct s2io_nic * sp)
6640 u16 pci_cmd = 0, pcix_cmd = 0;
6642 /* Enable Data Parity Error Recovery in PCI-X command register. */
6643 pci_read_config_word(sp->pdev, PCIX_COMMAND_REGISTER,
6645 pci_write_config_word(sp->pdev, PCIX_COMMAND_REGISTER,
6647 pci_read_config_word(sp->pdev, PCIX_COMMAND_REGISTER,
6650 /* Set the PErr Response bit in PCI command register. */
6651 pci_read_config_word(sp->pdev, PCI_COMMAND, &pci_cmd);
6652 pci_write_config_word(sp->pdev, PCI_COMMAND,
6653 (pci_cmd | PCI_COMMAND_PARITY));
6654 pci_read_config_word(sp->pdev, PCI_COMMAND, &pci_cmd);
6657 static int s2io_verify_parm(struct pci_dev *pdev, u8 *dev_intr_type)
6659 if ( tx_fifo_num > 8) {
6660 DBG_PRINT(ERR_DBG, "s2io: Requested number of Tx fifos not "
6662 DBG_PRINT(ERR_DBG, "s2io: Default to 8 Tx fifos\n");
6665 if ( rx_ring_num > 8) {
6666 DBG_PRINT(ERR_DBG, "s2io: Requested number of Rx rings not "
6668 DBG_PRINT(ERR_DBG, "s2io: Default to 8 Rx rings\n");
6671 if (*dev_intr_type != INTA)
6674 #ifndef CONFIG_PCI_MSI
6675 if (*dev_intr_type != INTA) {
6676 DBG_PRINT(ERR_DBG, "s2io: This kernel does not support"
6677 "MSI/MSI-X. Defaulting to INTA\n");
6678 *dev_intr_type = INTA;
6681 if (*dev_intr_type > MSI_X) {
6682 DBG_PRINT(ERR_DBG, "s2io: Wrong intr_type requested. "
6683 "Defaulting to INTA\n");
6684 *dev_intr_type = INTA;
6687 if ((*dev_intr_type == MSI_X) &&
6688 ((pdev->device != PCI_DEVICE_ID_HERC_WIN) &&
6689 (pdev->device != PCI_DEVICE_ID_HERC_UNI))) {
6690 DBG_PRINT(ERR_DBG, "s2io: Xframe I does not support MSI_X. "
6691 "Defaulting to INTA\n");
6692 *dev_intr_type = INTA;
6694 if ( (rx_ring_num > 1) && (*dev_intr_type != INTA) )
6696 if (rx_ring_mode > 3) {
6697 DBG_PRINT(ERR_DBG, "s2io: Requested ring mode not supported\n");
6698 DBG_PRINT(ERR_DBG, "s2io: Defaulting to 3-buffer mode\n");
6705 * s2io_init_nic - Initialization of the adapter .
6706 * @pdev : structure containing the PCI related information of the device.
6707 * @pre: List of PCI devices supported by the driver listed in s2io_tbl.
6709 * The function initializes an adapter identified by the pci_dec structure.
6710 * All OS related initialization including memory and device structure and
6711 * initlaization of the device private variable is done. Also the swapper
6712 * control register is initialized to enable read and write into the I/O
6713 * registers of the device.
6715 * returns 0 on success and negative on failure.
6718 static int __devinit
6719 s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre)
6721 struct s2io_nic *sp;
6722 struct net_device *dev;
6724 int dma_flag = FALSE;
6725 u32 mac_up, mac_down;
6726 u64 val64 = 0, tmp64 = 0;
6727 struct XENA_dev_config __iomem *bar0 = NULL;
6729 struct mac_info *mac_control;
6730 struct config_param *config;
6732 u8 dev_intr_type = intr_type;
6734 if ((ret = s2io_verify_parm(pdev, &dev_intr_type)))
6737 if ((ret = pci_enable_device(pdev))) {
6739 "s2io_init_nic: pci_enable_device failed\n");
6743 if (!pci_set_dma_mask(pdev, DMA_64BIT_MASK)) {
6744 DBG_PRINT(INIT_DBG, "s2io_init_nic: Using 64bit DMA\n");
6746 if (pci_set_consistent_dma_mask
6747 (pdev, DMA_64BIT_MASK)) {
6749 "Unable to obtain 64bit DMA for \
6750 consistent allocations\n");
6751 pci_disable_device(pdev);
6754 } else if (!pci_set_dma_mask(pdev, DMA_32BIT_MASK)) {
6755 DBG_PRINT(INIT_DBG, "s2io_init_nic: Using 32bit DMA\n");
6757 pci_disable_device(pdev);
6760 if (dev_intr_type != MSI_X) {
6761 if (pci_request_regions(pdev, s2io_driver_name)) {
6762 DBG_PRINT(ERR_DBG, "Request Regions failed\n");
6763 pci_disable_device(pdev);
6768 if (!(request_mem_region(pci_resource_start(pdev, 0),
6769 pci_resource_len(pdev, 0), s2io_driver_name))) {
6770 DBG_PRINT(ERR_DBG, "bar0 Request Regions failed\n");
6771 pci_disable_device(pdev);
6774 if (!(request_mem_region(pci_resource_start(pdev, 2),
6775 pci_resource_len(pdev, 2), s2io_driver_name))) {
6776 DBG_PRINT(ERR_DBG, "bar1 Request Regions failed\n");
6777 release_mem_region(pci_resource_start(pdev, 0),
6778 pci_resource_len(pdev, 0));
6779 pci_disable_device(pdev);
6784 dev = alloc_etherdev(sizeof(struct s2io_nic));
6786 DBG_PRINT(ERR_DBG, "Device allocation failed\n");
6787 pci_disable_device(pdev);
6788 pci_release_regions(pdev);
6792 pci_set_master(pdev);
6793 pci_set_drvdata(pdev, dev);
6794 SET_MODULE_OWNER(dev);
6795 SET_NETDEV_DEV(dev, &pdev->dev);
6797 /* Private member variable initialized to s2io NIC structure */
6799 memset(sp, 0, sizeof(struct s2io_nic));
6802 sp->high_dma_flag = dma_flag;
6803 sp->device_enabled_once = FALSE;
6804 if (rx_ring_mode == 1)
6805 sp->rxd_mode = RXD_MODE_1;
6806 if (rx_ring_mode == 2)
6807 sp->rxd_mode = RXD_MODE_3B;
6808 if (rx_ring_mode == 3)
6809 sp->rxd_mode = RXD_MODE_3A;
6811 sp->intr_type = dev_intr_type;
6813 if ((pdev->device == PCI_DEVICE_ID_HERC_WIN) ||
6814 (pdev->device == PCI_DEVICE_ID_HERC_UNI))
6815 sp->device_type = XFRAME_II_DEVICE;
6817 sp->device_type = XFRAME_I_DEVICE;
6821 /* Initialize some PCI/PCI-X fields of the NIC. */
6825 * Setting the device configuration parameters.
6826 * Most of these parameters can be specified by the user during
6827 * module insertion as they are module loadable parameters. If
6828 * these parameters are not not specified during load time, they
6829 * are initialized with default values.
6831 mac_control = &sp->mac_control;
6832 config = &sp->config;
6834 /* Tx side parameters. */
6835 config->tx_fifo_num = tx_fifo_num;
6836 for (i = 0; i < MAX_TX_FIFOS; i++) {
6837 config->tx_cfg[i].fifo_len = tx_fifo_len[i];
6838 config->tx_cfg[i].fifo_priority = i;
6841 /* mapping the QoS priority to the configured fifos */
6842 for (i = 0; i < MAX_TX_FIFOS; i++)
6843 config->fifo_mapping[i] = fifo_map[config->tx_fifo_num][i];
6845 config->tx_intr_type = TXD_INT_TYPE_UTILZ;
6846 for (i = 0; i < config->tx_fifo_num; i++) {
6847 config->tx_cfg[i].f_no_snoop =
6848 (NO_SNOOP_TXD | NO_SNOOP_TXD_BUFFER);
6849 if (config->tx_cfg[i].fifo_len < 65) {
6850 config->tx_intr_type = TXD_INT_TYPE_PER_LIST;
6854 /* + 2 because one Txd for skb->data and one Txd for UFO */
6855 config->max_txds = MAX_SKB_FRAGS + 2;
6857 /* Rx side parameters. */
6858 config->rx_ring_num = rx_ring_num;
6859 for (i = 0; i < MAX_RX_RINGS; i++) {
6860 config->rx_cfg[i].num_rxd = rx_ring_sz[i] *
6861 (rxd_count[sp->rxd_mode] + 1);
6862 config->rx_cfg[i].ring_priority = i;
6865 for (i = 0; i < rx_ring_num; i++) {
6866 config->rx_cfg[i].ring_org = RING_ORG_BUFF1;
6867 config->rx_cfg[i].f_no_snoop =
6868 (NO_SNOOP_RXD | NO_SNOOP_RXD_BUFFER);
6871 /* Setting Mac Control parameters */
6872 mac_control->rmac_pause_time = rmac_pause_time;
6873 mac_control->mc_pause_threshold_q0q3 = mc_pause_threshold_q0q3;
6874 mac_control->mc_pause_threshold_q4q7 = mc_pause_threshold_q4q7;
6877 /* Initialize Ring buffer parameters. */
6878 for (i = 0; i < config->rx_ring_num; i++)
6879 atomic_set(&sp->rx_bufs_left[i], 0);
6881 /* Initialize the number of ISRs currently running */
6882 atomic_set(&sp->isr_cnt, 0);
6884 /* initialize the shared memory used by the NIC and the host */
6885 if (init_shared_mem(sp)) {
6886 DBG_PRINT(ERR_DBG, "%s: Memory allocation failed\n",
6889 goto mem_alloc_failed;
6892 sp->bar0 = ioremap(pci_resource_start(pdev, 0),
6893 pci_resource_len(pdev, 0));
6895 DBG_PRINT(ERR_DBG, "%s: Neterion: cannot remap io mem1\n",
6898 goto bar0_remap_failed;
6901 sp->bar1 = ioremap(pci_resource_start(pdev, 2),
6902 pci_resource_len(pdev, 2));
6904 DBG_PRINT(ERR_DBG, "%s: Neterion: cannot remap io mem2\n",
6907 goto bar1_remap_failed;
6910 dev->irq = pdev->irq;
6911 dev->base_addr = (unsigned long) sp->bar0;
6913 /* Initializing the BAR1 address as the start of the FIFO pointer. */
6914 for (j = 0; j < MAX_TX_FIFOS; j++) {
6915 mac_control->tx_FIFO_start[j] = (struct TxFIFO_element __iomem *)
6916 (sp->bar1 + (j * 0x00020000));
6919 /* Driver entry points */
6920 dev->open = &s2io_open;
6921 dev->stop = &s2io_close;
6922 dev->hard_start_xmit = &s2io_xmit;
6923 dev->get_stats = &s2io_get_stats;
6924 dev->set_multicast_list = &s2io_set_multicast;
6925 dev->do_ioctl = &s2io_ioctl;
6926 dev->change_mtu = &s2io_change_mtu;
6927 SET_ETHTOOL_OPS(dev, &netdev_ethtool_ops);
6928 dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
6929 dev->vlan_rx_register = s2io_vlan_rx_register;
6930 dev->vlan_rx_kill_vid = (void *)s2io_vlan_rx_kill_vid;
6933 * will use eth_mac_addr() for dev->set_mac_address
6934 * mac address will be set every time dev->open() is called
6936 dev->poll = s2io_poll;
6939 #ifdef CONFIG_NET_POLL_CONTROLLER
6940 dev->poll_controller = s2io_netpoll;
6943 dev->features |= NETIF_F_SG | NETIF_F_IP_CSUM;
6944 if (sp->high_dma_flag == TRUE)
6945 dev->features |= NETIF_F_HIGHDMA;
6946 dev->features |= NETIF_F_TSO;
6947 dev->features |= NETIF_F_TSO6;
6948 if ((sp->device_type & XFRAME_II_DEVICE) && (ufo)) {
6949 dev->features |= NETIF_F_UFO;
6950 dev->features |= NETIF_F_HW_CSUM;
6953 dev->tx_timeout = &s2io_tx_watchdog;
6954 dev->watchdog_timeo = WATCH_DOG_TIMEOUT;
6955 INIT_WORK(&sp->rst_timer_task, s2io_restart_nic);
6956 INIT_WORK(&sp->set_link_task, s2io_set_link);
6958 pci_save_state(sp->pdev);
6960 /* Setting swapper control on the NIC, for proper reset operation */
6961 if (s2io_set_swapper(sp)) {
6962 DBG_PRINT(ERR_DBG, "%s:swapper settings are wrong\n",
6965 goto set_swap_failed;
6968 /* Verify if the Herc works on the slot its placed into */
6969 if (sp->device_type & XFRAME_II_DEVICE) {
6970 mode = s2io_verify_pci_mode(sp);
6972 DBG_PRINT(ERR_DBG, "%s: ", __FUNCTION__);
6973 DBG_PRINT(ERR_DBG, " Unsupported PCI bus mode\n");
6975 goto set_swap_failed;
6979 /* Not needed for Herc */
6980 if (sp->device_type & XFRAME_I_DEVICE) {
6982 * Fix for all "FFs" MAC address problems observed on
6985 fix_mac_address(sp);
6990 * MAC address initialization.
6991 * For now only one mac address will be read and used.
6994 val64 = RMAC_ADDR_CMD_MEM_RD | RMAC_ADDR_CMD_MEM_STROBE_NEW_CMD |
6995 RMAC_ADDR_CMD_MEM_OFFSET(0 + MAC_MAC_ADDR_START_OFFSET);
6996 writeq(val64, &bar0->rmac_addr_cmd_mem);
6997 wait_for_cmd_complete(&bar0->rmac_addr_cmd_mem,
6998 RMAC_ADDR_CMD_MEM_STROBE_CMD_EXECUTING);
6999 tmp64 = readq(&bar0->rmac_addr_data0_mem);
7000 mac_down = (u32) tmp64;
7001 mac_up = (u32) (tmp64 >> 32);
7003 memset(sp->def_mac_addr[0].mac_addr, 0, sizeof(ETH_ALEN));
7005 sp->def_mac_addr[0].mac_addr[3] = (u8) (mac_up);
7006 sp->def_mac_addr[0].mac_addr[2] = (u8) (mac_up >> 8);
7007 sp->def_mac_addr[0].mac_addr[1] = (u8) (mac_up >> 16);
7008 sp->def_mac_addr[0].mac_addr[0] = (u8) (mac_up >> 24);
7009 sp->def_mac_addr[0].mac_addr[5] = (u8) (mac_down >> 16);
7010 sp->def_mac_addr[0].mac_addr[4] = (u8) (mac_down >> 24);
7012 /* Set the factory defined MAC address initially */
7013 dev->addr_len = ETH_ALEN;
7014 memcpy(dev->dev_addr, sp->def_mac_addr, ETH_ALEN);
7016 /* reset Nic and bring it to known state */
7020 * Initialize the tasklet status and link state flags
7021 * and the card state parameter
7023 atomic_set(&(sp->card_state), 0);
7024 sp->tasklet_status = 0;
7027 /* Initialize spinlocks */
7028 spin_lock_init(&sp->tx_lock);
7031 spin_lock_init(&sp->put_lock);
7032 spin_lock_init(&sp->rx_lock);
7035 * SXE-002: Configure link and activity LED to init state
7038 subid = sp->pdev->subsystem_device;
7039 if ((subid & 0xFF) >= 0x07) {
7040 val64 = readq(&bar0->gpio_control);
7041 val64 |= 0x0000800000000000ULL;
7042 writeq(val64, &bar0->gpio_control);
7043 val64 = 0x0411040400000000ULL;
7044 writeq(val64, (void __iomem *) bar0 + 0x2700);
7045 val64 = readq(&bar0->gpio_control);
7048 sp->rx_csum = 1; /* Rx chksum verify enabled by default */
7050 if (register_netdev(dev)) {
7051 DBG_PRINT(ERR_DBG, "Device registration failed\n");
7053 goto register_failed;
7056 DBG_PRINT(ERR_DBG, "Copyright(c) 2002-2005 Neterion Inc.\n");
7057 DBG_PRINT(ERR_DBG, "%s: Neterion %s (rev %d)\n",dev->name,
7058 sp->product_name, get_xena_rev_id(sp->pdev));
7059 DBG_PRINT(ERR_DBG, "%s: Driver version %s\n", dev->name,
7060 s2io_driver_version);
7061 DBG_PRINT(ERR_DBG, "%s: MAC ADDR: "
7062 "%02x:%02x:%02x:%02x:%02x:%02x", dev->name,
7063 sp->def_mac_addr[0].mac_addr[0],
7064 sp->def_mac_addr[0].mac_addr[1],
7065 sp->def_mac_addr[0].mac_addr[2],
7066 sp->def_mac_addr[0].mac_addr[3],
7067 sp->def_mac_addr[0].mac_addr[4],
7068 sp->def_mac_addr[0].mac_addr[5]);
7069 DBG_PRINT(ERR_DBG, "SERIAL NUMBER: %s\n", sp->serial_num);
7070 if (sp->device_type & XFRAME_II_DEVICE) {
7071 mode = s2io_print_pci_mode(sp);
7073 DBG_PRINT(ERR_DBG, " Unsupported PCI bus mode\n");
7075 unregister_netdev(dev);
7076 goto set_swap_failed;
7079 switch(sp->rxd_mode) {
7081 DBG_PRINT(ERR_DBG, "%s: 1-Buffer receive mode enabled\n",
7085 DBG_PRINT(ERR_DBG, "%s: 2-Buffer receive mode enabled\n",
7089 DBG_PRINT(ERR_DBG, "%s: 3-Buffer receive mode enabled\n",
7095 DBG_PRINT(ERR_DBG, "%s: NAPI enabled\n", dev->name);
7096 switch(sp->intr_type) {
7098 DBG_PRINT(ERR_DBG, "%s: Interrupt type INTA\n", dev->name);
7101 DBG_PRINT(ERR_DBG, "%s: Interrupt type MSI\n", dev->name);
7104 DBG_PRINT(ERR_DBG, "%s: Interrupt type MSI-X\n", dev->name);
7108 DBG_PRINT(ERR_DBG, "%s: Large receive offload enabled\n",
7111 DBG_PRINT(ERR_DBG, "%s: UDP Fragmentation Offload(UFO)"
7112 " enabled\n", dev->name);
7113 /* Initialize device name */
7114 sprintf(sp->name, "%s Neterion %s", dev->name, sp->product_name);
7116 /* Initialize bimodal Interrupts */
7117 sp->config.bimodal = bimodal;
7118 if (!(sp->device_type & XFRAME_II_DEVICE) && bimodal) {
7119 sp->config.bimodal = 0;
7120 DBG_PRINT(ERR_DBG,"%s:Bimodal intr not supported by Xframe I\n",
7125 * Make Link state as off at this point, when the Link change
7126 * interrupt comes the state will be automatically changed to
7129 netif_carrier_off(dev);
7140 free_shared_mem(sp);
7141 pci_disable_device(pdev);
7142 if (dev_intr_type != MSI_X)
7143 pci_release_regions(pdev);
7145 release_mem_region(pci_resource_start(pdev, 0),
7146 pci_resource_len(pdev, 0));
7147 release_mem_region(pci_resource_start(pdev, 2),
7148 pci_resource_len(pdev, 2));
7150 pci_set_drvdata(pdev, NULL);
7157 * s2io_rem_nic - Free the PCI device
7158 * @pdev: structure containing the PCI related information of the device.
7159 * Description: This function is called by the Pci subsystem to release a
7160 * PCI device and free up all resource held up by the device. This could
7161 * be in response to a Hot plug event or when the driver is to be removed
7165 static void __devexit s2io_rem_nic(struct pci_dev *pdev)
7167 struct net_device *dev =
7168 (struct net_device *) pci_get_drvdata(pdev);
7169 struct s2io_nic *sp;
7172 DBG_PRINT(ERR_DBG, "Driver Data is NULL!!\n");
7177 unregister_netdev(dev);
7179 free_shared_mem(sp);
7182 if (sp->intr_type != MSI_X)
7183 pci_release_regions(pdev);
7185 release_mem_region(pci_resource_start(pdev, 0),
7186 pci_resource_len(pdev, 0));
7187 release_mem_region(pci_resource_start(pdev, 2),
7188 pci_resource_len(pdev, 2));
7190 pci_set_drvdata(pdev, NULL);
7192 pci_disable_device(pdev);
7196 * s2io_starter - Entry point for the driver
7197 * Description: This function is the entry point for the driver. It verifies
7198 * the module loadable parameters and initializes PCI configuration space.
7201 int __init s2io_starter(void)
7203 return pci_register_driver(&s2io_driver);
7207 * s2io_closer - Cleanup routine for the driver
7208 * Description: This function is the cleanup routine for the driver. It unregist * ers the driver.
7211 static __exit void s2io_closer(void)
7213 pci_unregister_driver(&s2io_driver);
7214 DBG_PRINT(INIT_DBG, "cleanup done\n");
7217 module_init(s2io_starter);
7218 module_exit(s2io_closer);
7220 static int check_L2_lro_capable(u8 *buffer, struct iphdr **ip,
7221 struct tcphdr **tcp, struct RxD_t *rxdp)
7224 u8 l2_type = (u8)((rxdp->Control_1 >> 37) & 0x7), ip_len;
7226 if (!(rxdp->Control_1 & RXD_FRAME_PROTO_TCP)) {
7227 DBG_PRINT(INIT_DBG,"%s: Non-TCP frames not supported for LRO\n",
7233 * By default the VLAN field in the MAC is stripped by the card, if this
7234 * feature is turned off in rx_pa_cfg register, then the ip_off field
7235 * has to be shifted by a further 2 bytes
7238 case 0: /* DIX type */
7239 case 4: /* DIX type with VLAN */
7240 ip_off = HEADER_ETHERNET_II_802_3_SIZE;
7242 /* LLC, SNAP etc are considered non-mergeable */
7247 *ip = (struct iphdr *)((u8 *)buffer + ip_off);
7248 ip_len = (u8)((*ip)->ihl);
7250 *tcp = (struct tcphdr *)((unsigned long)*ip + ip_len);
7255 static int check_for_socket_match(struct lro *lro, struct iphdr *ip,
7258 DBG_PRINT(INFO_DBG,"%s: Been here...\n", __FUNCTION__);
7259 if ((lro->iph->saddr != ip->saddr) || (lro->iph->daddr != ip->daddr) ||
7260 (lro->tcph->source != tcp->source) || (lro->tcph->dest != tcp->dest))
7265 static inline int get_l4_pyld_length(struct iphdr *ip, struct tcphdr *tcp)
7267 return(ntohs(ip->tot_len) - (ip->ihl << 2) - (tcp->doff << 2));
7270 static void initiate_new_session(struct lro *lro, u8 *l2h,
7271 struct iphdr *ip, struct tcphdr *tcp, u32 tcp_pyld_len)
7273 DBG_PRINT(INFO_DBG,"%s: Been here...\n", __FUNCTION__);
7277 lro->tcp_next_seq = tcp_pyld_len + ntohl(tcp->seq);
7278 lro->tcp_ack = ntohl(tcp->ack_seq);
7280 lro->total_len = ntohs(ip->tot_len);
7283 * check if we saw TCP timestamp. Other consistency checks have
7284 * already been done.
7286 if (tcp->doff == 8) {
7288 ptr = (u32 *)(tcp+1);
7290 lro->cur_tsval = *(ptr+1);
7291 lro->cur_tsecr = *(ptr+2);
7296 static void update_L3L4_header(struct s2io_nic *sp, struct lro *lro)
7298 struct iphdr *ip = lro->iph;
7299 struct tcphdr *tcp = lro->tcph;
7301 struct stat_block *statinfo = sp->mac_control.stats_info;
7302 DBG_PRINT(INFO_DBG,"%s: Been here...\n", __FUNCTION__);
7304 /* Update L3 header */
7305 ip->tot_len = htons(lro->total_len);
7307 nchk = ip_fast_csum((u8 *)lro->iph, ip->ihl);
7310 /* Update L4 header */
7311 tcp->ack_seq = lro->tcp_ack;
7312 tcp->window = lro->window;
7314 /* Update tsecr field if this session has timestamps enabled */
7316 u32 *ptr = (u32 *)(tcp + 1);
7317 *(ptr+2) = lro->cur_tsecr;
7320 /* Update counters required for calculation of
7321 * average no. of packets aggregated.
7323 statinfo->sw_stat.sum_avg_pkts_aggregated += lro->sg_num;
7324 statinfo->sw_stat.num_aggregations++;
7327 static void aggregate_new_rx(struct lro *lro, struct iphdr *ip,
7328 struct tcphdr *tcp, u32 l4_pyld)
7330 DBG_PRINT(INFO_DBG,"%s: Been here...\n", __FUNCTION__);
7331 lro->total_len += l4_pyld;
7332 lro->frags_len += l4_pyld;
7333 lro->tcp_next_seq += l4_pyld;
7336 /* Update ack seq no. and window ad(from this pkt) in LRO object */
7337 lro->tcp_ack = tcp->ack_seq;
7338 lro->window = tcp->window;
7342 /* Update tsecr and tsval from this packet */
7343 ptr = (u32 *) (tcp + 1);
7344 lro->cur_tsval = *(ptr + 1);
7345 lro->cur_tsecr = *(ptr + 2);
7349 static int verify_l3_l4_lro_capable(struct lro *l_lro, struct iphdr *ip,
7350 struct tcphdr *tcp, u32 tcp_pyld_len)
7354 DBG_PRINT(INFO_DBG,"%s: Been here...\n", __FUNCTION__);
7356 if (!tcp_pyld_len) {
7357 /* Runt frame or a pure ack */
7361 if (ip->ihl != 5) /* IP has options */
7364 /* If we see CE codepoint in IP header, packet is not mergeable */
7365 if (INET_ECN_is_ce(ipv4_get_dsfield(ip)))
7368 /* If we see ECE or CWR flags in TCP header, packet is not mergeable */
7369 if (tcp->urg || tcp->psh || tcp->rst || tcp->syn || tcp->fin ||
7370 tcp->ece || tcp->cwr || !tcp->ack) {
7372 * Currently recognize only the ack control word and
7373 * any other control field being set would result in
7374 * flushing the LRO session
7380 * Allow only one TCP timestamp option. Don't aggregate if
7381 * any other options are detected.
7383 if (tcp->doff != 5 && tcp->doff != 8)
7386 if (tcp->doff == 8) {
7387 ptr = (u8 *)(tcp + 1);
7388 while (*ptr == TCPOPT_NOP)
7390 if (*ptr != TCPOPT_TIMESTAMP || *(ptr+1) != TCPOLEN_TIMESTAMP)
7393 /* Ensure timestamp value increases monotonically */
7395 if (l_lro->cur_tsval > *((u32 *)(ptr+2)))
7398 /* timestamp echo reply should be non-zero */
7399 if (*((u32 *)(ptr+6)) == 0)
7407 s2io_club_tcp_session(u8 *buffer, u8 **tcp, u32 *tcp_len, struct lro **lro,
7408 struct RxD_t *rxdp, struct s2io_nic *sp)
7411 struct tcphdr *tcph;
7414 if (!(ret = check_L2_lro_capable(buffer, &ip, (struct tcphdr **)tcp,
7416 DBG_PRINT(INFO_DBG,"IP Saddr: %x Daddr: %x\n",
7417 ip->saddr, ip->daddr);
7422 tcph = (struct tcphdr *)*tcp;
7423 *tcp_len = get_l4_pyld_length(ip, tcph);
7424 for (i=0; i<MAX_LRO_SESSIONS; i++) {
7425 struct lro *l_lro = &sp->lro0_n[i];
7426 if (l_lro->in_use) {
7427 if (check_for_socket_match(l_lro, ip, tcph))
7429 /* Sock pair matched */
7432 if ((*lro)->tcp_next_seq != ntohl(tcph->seq)) {
7433 DBG_PRINT(INFO_DBG, "%s:Out of order. expected "
7434 "0x%x, actual 0x%x\n", __FUNCTION__,
7435 (*lro)->tcp_next_seq,
7438 sp->mac_control.stats_info->
7439 sw_stat.outof_sequence_pkts++;
7444 if (!verify_l3_l4_lro_capable(l_lro, ip, tcph,*tcp_len))
7445 ret = 1; /* Aggregate */
7447 ret = 2; /* Flush both */
7453 /* Before searching for available LRO objects,
7454 * check if the pkt is L3/L4 aggregatable. If not
7455 * don't create new LRO session. Just send this
7458 if (verify_l3_l4_lro_capable(NULL, ip, tcph, *tcp_len)) {
7462 for (i=0; i<MAX_LRO_SESSIONS; i++) {
7463 struct lro *l_lro = &sp->lro0_n[i];
7464 if (!(l_lro->in_use)) {
7466 ret = 3; /* Begin anew */
7472 if (ret == 0) { /* sessions exceeded */
7473 DBG_PRINT(INFO_DBG,"%s:All LRO sessions already in use\n",
7481 initiate_new_session(*lro, buffer, ip, tcph, *tcp_len);
7484 update_L3L4_header(sp, *lro);
7487 aggregate_new_rx(*lro, ip, tcph, *tcp_len);
7488 if ((*lro)->sg_num == sp->lro_max_aggr_per_sess) {
7489 update_L3L4_header(sp, *lro);
7490 ret = 4; /* Flush the LRO */
7494 DBG_PRINT(ERR_DBG,"%s:Dont know, can't say!!\n",
7502 static void clear_lro_session(struct lro *lro)
7504 static u16 lro_struct_size = sizeof(struct lro);
7506 memset(lro, 0, lro_struct_size);
7509 static void queue_rx_frame(struct sk_buff *skb)
7511 struct net_device *dev = skb->dev;
7513 skb->protocol = eth_type_trans(skb, dev);
7515 netif_receive_skb(skb);
7520 static void lro_append_pkt(struct s2io_nic *sp, struct lro *lro,
7521 struct sk_buff *skb,
7524 struct sk_buff *first = lro->parent;
7526 first->len += tcp_len;
7527 first->data_len = lro->frags_len;
7528 skb_pull(skb, (skb->len - tcp_len));
7529 if (skb_shinfo(first)->frag_list)
7530 lro->last_frag->next = skb;
7532 skb_shinfo(first)->frag_list = skb;
7533 first->truesize += skb->truesize;
7534 lro->last_frag = skb;
7535 sp->mac_control.stats_info->sw_stat.clubbed_frms_cnt++;