Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wirel...
[firefly-linux-kernel-4.4.55.git] / drivers / net / usb / usbnet.c
1 /*
2  * USB Network driver infrastructure
3  * Copyright (C) 2000-2005 by David Brownell
4  * Copyright (C) 2003-2005 David Hollis <dhollis@davehollis.com>
5  *
6  * This program is free software; you can redistribute it and/or modify
7  * it under the terms of the GNU General Public License as published by
8  * the Free Software Foundation; either version 2 of the License, or
9  * (at your option) any later version.
10  *
11  * This program is distributed in the hope that it will be useful,
12  * but WITHOUT ANY WARRANTY; without even the implied warranty of
13  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
14  * GNU General Public License for more details.
15  *
16  * You should have received a copy of the GNU General Public License
17  * along with this program; if not, write to the Free Software
18  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
19  */
20
21 /*
22  * This is a generic "USB networking" framework that works with several
23  * kinds of full and high speed networking devices:  host-to-host cables,
24  * smart usb peripherals, and actual Ethernet adapters.
25  *
26  * These devices usually differ in terms of control protocols (if they
27  * even have one!) and sometimes they define new framing to wrap or batch
28  * Ethernet packets.  Otherwise, they talk to USB pretty much the same,
29  * so interface (un)binding, endpoint I/O queues, fault handling, and other
30  * issues can usefully be addressed by this framework.
31  */
32
33 // #define      DEBUG                   // error path messages, extra info
34 // #define      VERBOSE                 // more; success messages
35
36 #include <linux/module.h>
37 #include <linux/init.h>
38 #include <linux/netdevice.h>
39 #include <linux/etherdevice.h>
40 #include <linux/ctype.h>
41 #include <linux/ethtool.h>
42 #include <linux/workqueue.h>
43 #include <linux/mii.h>
44 #include <linux/usb.h>
45 #include <linux/usb/usbnet.h>
46 #include <linux/slab.h>
47 #include <linux/kernel.h>
48 #include <linux/pm_runtime.h>
49
50 #define DRIVER_VERSION          "22-Aug-2005"
51
52
53 /*-------------------------------------------------------------------------*/
54
55 /*
56  * Nineteen USB 1.1 max size bulk transactions per frame (ms), max.
57  * Several dozen bytes of IPv4 data can fit in two such transactions.
58  * One maximum size Ethernet packet takes twenty four of them.
59  * For high speed, each frame comfortably fits almost 36 max size
60  * Ethernet packets (so queues should be bigger).
61  *
62  * REVISIT qlens should be members of 'struct usbnet'; the goal is to
63  * let the USB host controller be busy for 5msec or more before an irq
64  * is required, under load.  Jumbograms change the equation.
65  */
66 #define RX_MAX_QUEUE_MEMORY (60 * 1518)
67 #define RX_QLEN(dev) (((dev)->udev->speed == USB_SPEED_HIGH) ? \
68                         (RX_MAX_QUEUE_MEMORY/(dev)->rx_urb_size) : 4)
69 #define TX_QLEN(dev) (((dev)->udev->speed == USB_SPEED_HIGH) ? \
70                         (RX_MAX_QUEUE_MEMORY/(dev)->hard_mtu) : 4)
71
72 // reawaken network queue this soon after stopping; else watchdog barks
73 #define TX_TIMEOUT_JIFFIES      (5*HZ)
74
75 // throttle rx/tx briefly after some faults, so khubd might disconnect()
76 // us (it polls at HZ/4 usually) before we report too many false errors.
77 #define THROTTLE_JIFFIES        (HZ/8)
78
79 // between wakeups
80 #define UNLINK_TIMEOUT_MS       3
81
82 /*-------------------------------------------------------------------------*/
83
84 // randomly generated ethernet address
85 static u8       node_id [ETH_ALEN];
86
87 static const char driver_name [] = "usbnet";
88
89 /* use ethtool to change the level for any given device */
90 static int msg_level = -1;
91 module_param (msg_level, int, 0);
92 MODULE_PARM_DESC (msg_level, "Override default message level");
93
94 /*-------------------------------------------------------------------------*/
95
96 /* handles CDC Ethernet and many other network "bulk data" interfaces */
97 int usbnet_get_endpoints(struct usbnet *dev, struct usb_interface *intf)
98 {
99         int                             tmp;
100         struct usb_host_interface       *alt = NULL;
101         struct usb_host_endpoint        *in = NULL, *out = NULL;
102         struct usb_host_endpoint        *status = NULL;
103
104         for (tmp = 0; tmp < intf->num_altsetting; tmp++) {
105                 unsigned        ep;
106
107                 in = out = status = NULL;
108                 alt = intf->altsetting + tmp;
109
110                 /* take the first altsetting with in-bulk + out-bulk;
111                  * remember any status endpoint, just in case;
112                  * ignore other endpoints and altsettings.
113                  */
114                 for (ep = 0; ep < alt->desc.bNumEndpoints; ep++) {
115                         struct usb_host_endpoint        *e;
116                         int                             intr = 0;
117
118                         e = alt->endpoint + ep;
119                         switch (e->desc.bmAttributes) {
120                         case USB_ENDPOINT_XFER_INT:
121                                 if (!usb_endpoint_dir_in(&e->desc))
122                                         continue;
123                                 intr = 1;
124                                 /* FALLTHROUGH */
125                         case USB_ENDPOINT_XFER_BULK:
126                                 break;
127                         default:
128                                 continue;
129                         }
130                         if (usb_endpoint_dir_in(&e->desc)) {
131                                 if (!intr && !in)
132                                         in = e;
133                                 else if (intr && !status)
134                                         status = e;
135                         } else {
136                                 if (!out)
137                                         out = e;
138                         }
139                 }
140                 if (in && out)
141                         break;
142         }
143         if (!alt || !in || !out)
144                 return -EINVAL;
145
146         if (alt->desc.bAlternateSetting != 0 ||
147             !(dev->driver_info->flags & FLAG_NO_SETINT)) {
148                 tmp = usb_set_interface (dev->udev, alt->desc.bInterfaceNumber,
149                                 alt->desc.bAlternateSetting);
150                 if (tmp < 0)
151                         return tmp;
152         }
153
154         dev->in = usb_rcvbulkpipe (dev->udev,
155                         in->desc.bEndpointAddress & USB_ENDPOINT_NUMBER_MASK);
156         dev->out = usb_sndbulkpipe (dev->udev,
157                         out->desc.bEndpointAddress & USB_ENDPOINT_NUMBER_MASK);
158         dev->status = status;
159         return 0;
160 }
161 EXPORT_SYMBOL_GPL(usbnet_get_endpoints);
162
163 int usbnet_get_ethernet_addr(struct usbnet *dev, int iMACAddress)
164 {
165         int             tmp, i;
166         unsigned char   buf [13];
167
168         tmp = usb_string(dev->udev, iMACAddress, buf, sizeof buf);
169         if (tmp != 12) {
170                 dev_dbg(&dev->udev->dev,
171                         "bad MAC string %d fetch, %d\n", iMACAddress, tmp);
172                 if (tmp >= 0)
173                         tmp = -EINVAL;
174                 return tmp;
175         }
176         for (i = tmp = 0; i < 6; i++, tmp += 2)
177                 dev->net->dev_addr [i] =
178                         (hex_to_bin(buf[tmp]) << 4) + hex_to_bin(buf[tmp + 1]);
179         return 0;
180 }
181 EXPORT_SYMBOL_GPL(usbnet_get_ethernet_addr);
182
183 static void intr_complete (struct urb *urb)
184 {
185         struct usbnet   *dev = urb->context;
186         int             status = urb->status;
187
188         switch (status) {
189         /* success */
190         case 0:
191                 dev->driver_info->status(dev, urb);
192                 break;
193
194         /* software-driven interface shutdown */
195         case -ENOENT:           /* urb killed */
196         case -ESHUTDOWN:        /* hardware gone */
197                 netif_dbg(dev, ifdown, dev->net,
198                           "intr shutdown, code %d\n", status);
199                 return;
200
201         /* NOTE:  not throttling like RX/TX, since this endpoint
202          * already polls infrequently
203          */
204         default:
205                 netdev_dbg(dev->net, "intr status %d\n", status);
206                 break;
207         }
208
209         if (!netif_running (dev->net))
210                 return;
211
212         status = usb_submit_urb (urb, GFP_ATOMIC);
213         if (status != 0)
214                 netif_err(dev, timer, dev->net,
215                           "intr resubmit --> %d\n", status);
216 }
217
218 static int init_status (struct usbnet *dev, struct usb_interface *intf)
219 {
220         char            *buf = NULL;
221         unsigned        pipe = 0;
222         unsigned        maxp;
223         unsigned        period;
224
225         if (!dev->driver_info->status)
226                 return 0;
227
228         pipe = usb_rcvintpipe (dev->udev,
229                         dev->status->desc.bEndpointAddress
230                                 & USB_ENDPOINT_NUMBER_MASK);
231         maxp = usb_maxpacket (dev->udev, pipe, 0);
232
233         /* avoid 1 msec chatter:  min 8 msec poll rate */
234         period = max ((int) dev->status->desc.bInterval,
235                 (dev->udev->speed == USB_SPEED_HIGH) ? 7 : 3);
236
237         buf = kmalloc (maxp, GFP_KERNEL);
238         if (buf) {
239                 dev->interrupt = usb_alloc_urb (0, GFP_KERNEL);
240                 if (!dev->interrupt) {
241                         kfree (buf);
242                         return -ENOMEM;
243                 } else {
244                         usb_fill_int_urb(dev->interrupt, dev->udev, pipe,
245                                 buf, maxp, intr_complete, dev, period);
246                         dev->interrupt->transfer_flags |= URB_FREE_BUFFER;
247                         dev_dbg(&intf->dev,
248                                 "status ep%din, %d bytes period %d\n",
249                                 usb_pipeendpoint(pipe), maxp, period);
250                 }
251         }
252         return 0;
253 }
254
255 /* Passes this packet up the stack, updating its accounting.
256  * Some link protocols batch packets, so their rx_fixup paths
257  * can return clones as well as just modify the original skb.
258  */
259 void usbnet_skb_return (struct usbnet *dev, struct sk_buff *skb)
260 {
261         int     status;
262
263         if (test_bit(EVENT_RX_PAUSED, &dev->flags)) {
264                 skb_queue_tail(&dev->rxq_pause, skb);
265                 return;
266         }
267
268         skb->protocol = eth_type_trans (skb, dev->net);
269         dev->net->stats.rx_packets++;
270         dev->net->stats.rx_bytes += skb->len;
271
272         netif_dbg(dev, rx_status, dev->net, "< rx, len %zu, type 0x%x\n",
273                   skb->len + sizeof (struct ethhdr), skb->protocol);
274         memset (skb->cb, 0, sizeof (struct skb_data));
275
276         if (skb_defer_rx_timestamp(skb))
277                 return;
278
279         status = netif_rx (skb);
280         if (status != NET_RX_SUCCESS)
281                 netif_dbg(dev, rx_err, dev->net,
282                           "netif_rx status %d\n", status);
283 }
284 EXPORT_SYMBOL_GPL(usbnet_skb_return);
285
286 \f
287 /*-------------------------------------------------------------------------
288  *
289  * Network Device Driver (peer link to "Host Device", from USB host)
290  *
291  *-------------------------------------------------------------------------*/
292
293 int usbnet_change_mtu (struct net_device *net, int new_mtu)
294 {
295         struct usbnet   *dev = netdev_priv(net);
296         int             ll_mtu = new_mtu + net->hard_header_len;
297         int             old_hard_mtu = dev->hard_mtu;
298         int             old_rx_urb_size = dev->rx_urb_size;
299
300         if (new_mtu <= 0)
301                 return -EINVAL;
302         // no second zero-length packet read wanted after mtu-sized packets
303         if ((ll_mtu % dev->maxpacket) == 0)
304                 return -EDOM;
305         net->mtu = new_mtu;
306
307         dev->hard_mtu = net->mtu + net->hard_header_len;
308         if (dev->rx_urb_size == old_hard_mtu) {
309                 dev->rx_urb_size = dev->hard_mtu;
310                 if (dev->rx_urb_size > old_rx_urb_size)
311                         usbnet_unlink_rx_urbs(dev);
312         }
313
314         return 0;
315 }
316 EXPORT_SYMBOL_GPL(usbnet_change_mtu);
317
318 /* The caller must hold list->lock */
319 static void __usbnet_queue_skb(struct sk_buff_head *list,
320                         struct sk_buff *newsk, enum skb_state state)
321 {
322         struct skb_data *entry = (struct skb_data *) newsk->cb;
323
324         __skb_queue_tail(list, newsk);
325         entry->state = state;
326 }
327
328 /*-------------------------------------------------------------------------*/
329
330 /* some LK 2.4 HCDs oopsed if we freed or resubmitted urbs from
331  * completion callbacks.  2.5 should have fixed those bugs...
332  */
333
334 static enum skb_state defer_bh(struct usbnet *dev, struct sk_buff *skb,
335                 struct sk_buff_head *list, enum skb_state state)
336 {
337         unsigned long           flags;
338         enum skb_state          old_state;
339         struct skb_data *entry = (struct skb_data *) skb->cb;
340
341         spin_lock_irqsave(&list->lock, flags);
342         old_state = entry->state;
343         entry->state = state;
344         __skb_unlink(skb, list);
345         spin_unlock(&list->lock);
346         spin_lock(&dev->done.lock);
347         __skb_queue_tail(&dev->done, skb);
348         if (dev->done.qlen == 1)
349                 tasklet_schedule(&dev->bh);
350         spin_unlock_irqrestore(&dev->done.lock, flags);
351         return old_state;
352 }
353
354 /* some work can't be done in tasklets, so we use keventd
355  *
356  * NOTE:  annoying asymmetry:  if it's active, schedule_work() fails,
357  * but tasklet_schedule() doesn't.  hope the failure is rare.
358  */
359 void usbnet_defer_kevent (struct usbnet *dev, int work)
360 {
361         set_bit (work, &dev->flags);
362         if (!schedule_work (&dev->kevent)) {
363                 if (net_ratelimit())
364                         netdev_err(dev->net, "kevent %d may have been dropped\n", work);
365         } else {
366                 netdev_dbg(dev->net, "kevent %d scheduled\n", work);
367         }
368 }
369 EXPORT_SYMBOL_GPL(usbnet_defer_kevent);
370
371 /*-------------------------------------------------------------------------*/
372
373 static void rx_complete (struct urb *urb);
374
375 static int rx_submit (struct usbnet *dev, struct urb *urb, gfp_t flags)
376 {
377         struct sk_buff          *skb;
378         struct skb_data         *entry;
379         int                     retval = 0;
380         unsigned long           lockflags;
381         size_t                  size = dev->rx_urb_size;
382
383         /* prevent rx skb allocation when error ratio is high */
384         if (test_bit(EVENT_RX_KILL, &dev->flags)) {
385                 usb_free_urb(urb);
386                 return -ENOLINK;
387         }
388
389         skb = __netdev_alloc_skb_ip_align(dev->net, size, flags);
390         if (!skb) {
391                 netif_dbg(dev, rx_err, dev->net, "no rx skb\n");
392                 usbnet_defer_kevent (dev, EVENT_RX_MEMORY);
393                 usb_free_urb (urb);
394                 return -ENOMEM;
395         }
396
397         entry = (struct skb_data *) skb->cb;
398         entry->urb = urb;
399         entry->dev = dev;
400         entry->length = 0;
401
402         usb_fill_bulk_urb (urb, dev->udev, dev->in,
403                 skb->data, size, rx_complete, skb);
404
405         spin_lock_irqsave (&dev->rxq.lock, lockflags);
406
407         if (netif_running (dev->net) &&
408             netif_device_present (dev->net) &&
409             !test_bit (EVENT_RX_HALT, &dev->flags) &&
410             !test_bit (EVENT_DEV_ASLEEP, &dev->flags)) {
411                 switch (retval = usb_submit_urb (urb, GFP_ATOMIC)) {
412                 case -EPIPE:
413                         usbnet_defer_kevent (dev, EVENT_RX_HALT);
414                         break;
415                 case -ENOMEM:
416                         usbnet_defer_kevent (dev, EVENT_RX_MEMORY);
417                         break;
418                 case -ENODEV:
419                         netif_dbg(dev, ifdown, dev->net, "device gone\n");
420                         netif_device_detach (dev->net);
421                         break;
422                 case -EHOSTUNREACH:
423                         retval = -ENOLINK;
424                         break;
425                 default:
426                         netif_dbg(dev, rx_err, dev->net,
427                                   "rx submit, %d\n", retval);
428                         tasklet_schedule (&dev->bh);
429                         break;
430                 case 0:
431                         __usbnet_queue_skb(&dev->rxq, skb, rx_start);
432                 }
433         } else {
434                 netif_dbg(dev, ifdown, dev->net, "rx: stopped\n");
435                 retval = -ENOLINK;
436         }
437         spin_unlock_irqrestore (&dev->rxq.lock, lockflags);
438         if (retval) {
439                 dev_kfree_skb_any (skb);
440                 usb_free_urb (urb);
441         }
442         return retval;
443 }
444
445
446 /*-------------------------------------------------------------------------*/
447
448 static inline void rx_process (struct usbnet *dev, struct sk_buff *skb)
449 {
450         if (dev->driver_info->rx_fixup &&
451             !dev->driver_info->rx_fixup (dev, skb)) {
452                 /* With RX_ASSEMBLE, rx_fixup() must update counters */
453                 if (!(dev->driver_info->flags & FLAG_RX_ASSEMBLE))
454                         dev->net->stats.rx_errors++;
455                 goto done;
456         }
457         // else network stack removes extra byte if we forced a short packet
458
459         if (skb->len) {
460                 /* all data was already cloned from skb inside the driver */
461                 if (dev->driver_info->flags & FLAG_MULTI_PACKET)
462                         dev_kfree_skb_any(skb);
463                 else
464                         usbnet_skb_return(dev, skb);
465                 return;
466         }
467
468         netif_dbg(dev, rx_err, dev->net, "drop\n");
469         dev->net->stats.rx_errors++;
470 done:
471         skb_queue_tail(&dev->done, skb);
472 }
473
474 /*-------------------------------------------------------------------------*/
475
476 static void rx_complete (struct urb *urb)
477 {
478         struct sk_buff          *skb = (struct sk_buff *) urb->context;
479         struct skb_data         *entry = (struct skb_data *) skb->cb;
480         struct usbnet           *dev = entry->dev;
481         int                     urb_status = urb->status;
482         enum skb_state          state;
483
484         skb_put (skb, urb->actual_length);
485         state = rx_done;
486         entry->urb = NULL;
487
488         switch (urb_status) {
489         /* success */
490         case 0:
491                 if (skb->len < dev->net->hard_header_len) {
492                         state = rx_cleanup;
493                         dev->net->stats.rx_errors++;
494                         dev->net->stats.rx_length_errors++;
495                         netif_dbg(dev, rx_err, dev->net,
496                                   "rx length %d\n", skb->len);
497                 }
498                 break;
499
500         /* stalls need manual reset. this is rare ... except that
501          * when going through USB 2.0 TTs, unplug appears this way.
502          * we avoid the highspeed version of the ETIMEDOUT/EILSEQ
503          * storm, recovering as needed.
504          */
505         case -EPIPE:
506                 dev->net->stats.rx_errors++;
507                 usbnet_defer_kevent (dev, EVENT_RX_HALT);
508                 // FALLTHROUGH
509
510         /* software-driven interface shutdown */
511         case -ECONNRESET:               /* async unlink */
512         case -ESHUTDOWN:                /* hardware gone */
513                 netif_dbg(dev, ifdown, dev->net,
514                           "rx shutdown, code %d\n", urb_status);
515                 goto block;
516
517         /* we get controller i/o faults during khubd disconnect() delays.
518          * throttle down resubmits, to avoid log floods; just temporarily,
519          * so we still recover when the fault isn't a khubd delay.
520          */
521         case -EPROTO:
522         case -ETIME:
523         case -EILSEQ:
524                 dev->net->stats.rx_errors++;
525                 if (!timer_pending (&dev->delay)) {
526                         mod_timer (&dev->delay, jiffies + THROTTLE_JIFFIES);
527                         netif_dbg(dev, link, dev->net,
528                                   "rx throttle %d\n", urb_status);
529                 }
530 block:
531                 state = rx_cleanup;
532                 entry->urb = urb;
533                 urb = NULL;
534                 break;
535
536         /* data overrun ... flush fifo? */
537         case -EOVERFLOW:
538                 dev->net->stats.rx_over_errors++;
539                 // FALLTHROUGH
540
541         default:
542                 state = rx_cleanup;
543                 dev->net->stats.rx_errors++;
544                 netif_dbg(dev, rx_err, dev->net, "rx status %d\n", urb_status);
545                 break;
546         }
547
548         /* stop rx if packet error rate is high */
549         if (++dev->pkt_cnt > 30) {
550                 dev->pkt_cnt = 0;
551                 dev->pkt_err = 0;
552         } else {
553                 if (state == rx_cleanup)
554                         dev->pkt_err++;
555                 if (dev->pkt_err > 20)
556                         set_bit(EVENT_RX_KILL, &dev->flags);
557         }
558
559         state = defer_bh(dev, skb, &dev->rxq, state);
560
561         if (urb) {
562                 if (netif_running (dev->net) &&
563                     !test_bit (EVENT_RX_HALT, &dev->flags) &&
564                     state != unlink_start) {
565                         rx_submit (dev, urb, GFP_ATOMIC);
566                         usb_mark_last_busy(dev->udev);
567                         return;
568                 }
569                 usb_free_urb (urb);
570         }
571         netif_dbg(dev, rx_err, dev->net, "no read resubmitted\n");
572 }
573
574 /*-------------------------------------------------------------------------*/
575 void usbnet_pause_rx(struct usbnet *dev)
576 {
577         set_bit(EVENT_RX_PAUSED, &dev->flags);
578
579         netif_dbg(dev, rx_status, dev->net, "paused rx queue enabled\n");
580 }
581 EXPORT_SYMBOL_GPL(usbnet_pause_rx);
582
583 void usbnet_resume_rx(struct usbnet *dev)
584 {
585         struct sk_buff *skb;
586         int num = 0;
587
588         clear_bit(EVENT_RX_PAUSED, &dev->flags);
589
590         while ((skb = skb_dequeue(&dev->rxq_pause)) != NULL) {
591                 usbnet_skb_return(dev, skb);
592                 num++;
593         }
594
595         tasklet_schedule(&dev->bh);
596
597         netif_dbg(dev, rx_status, dev->net,
598                   "paused rx queue disabled, %d skbs requeued\n", num);
599 }
600 EXPORT_SYMBOL_GPL(usbnet_resume_rx);
601
602 void usbnet_purge_paused_rxq(struct usbnet *dev)
603 {
604         skb_queue_purge(&dev->rxq_pause);
605 }
606 EXPORT_SYMBOL_GPL(usbnet_purge_paused_rxq);
607
608 /*-------------------------------------------------------------------------*/
609
610 // unlink pending rx/tx; completion handlers do all other cleanup
611
612 static int unlink_urbs (struct usbnet *dev, struct sk_buff_head *q)
613 {
614         unsigned long           flags;
615         struct sk_buff          *skb;
616         int                     count = 0;
617
618         spin_lock_irqsave (&q->lock, flags);
619         while (!skb_queue_empty(q)) {
620                 struct skb_data         *entry;
621                 struct urb              *urb;
622                 int                     retval;
623
624                 skb_queue_walk(q, skb) {
625                         entry = (struct skb_data *) skb->cb;
626                         if (entry->state != unlink_start)
627                                 goto found;
628                 }
629                 break;
630 found:
631                 entry->state = unlink_start;
632                 urb = entry->urb;
633
634                 /*
635                  * Get reference count of the URB to avoid it to be
636                  * freed during usb_unlink_urb, which may trigger
637                  * use-after-free problem inside usb_unlink_urb since
638                  * usb_unlink_urb is always racing with .complete
639                  * handler(include defer_bh).
640                  */
641                 usb_get_urb(urb);
642                 spin_unlock_irqrestore(&q->lock, flags);
643                 // during some PM-driven resume scenarios,
644                 // these (async) unlinks complete immediately
645                 retval = usb_unlink_urb (urb);
646                 if (retval != -EINPROGRESS && retval != 0)
647                         netdev_dbg(dev->net, "unlink urb err, %d\n", retval);
648                 else
649                         count++;
650                 usb_put_urb(urb);
651                 spin_lock_irqsave(&q->lock, flags);
652         }
653         spin_unlock_irqrestore (&q->lock, flags);
654         return count;
655 }
656
657 // Flush all pending rx urbs
658 // minidrivers may need to do this when the MTU changes
659
660 void usbnet_unlink_rx_urbs(struct usbnet *dev)
661 {
662         if (netif_running(dev->net)) {
663                 (void) unlink_urbs (dev, &dev->rxq);
664                 tasklet_schedule(&dev->bh);
665         }
666 }
667 EXPORT_SYMBOL_GPL(usbnet_unlink_rx_urbs);
668
669 /*-------------------------------------------------------------------------*/
670
671 // precondition: never called in_interrupt
672 static void usbnet_terminate_urbs(struct usbnet *dev)
673 {
674         DECLARE_WAIT_QUEUE_HEAD_ONSTACK(unlink_wakeup);
675         DECLARE_WAITQUEUE(wait, current);
676         int temp;
677
678         /* ensure there are no more active urbs */
679         add_wait_queue(&unlink_wakeup, &wait);
680         set_current_state(TASK_UNINTERRUPTIBLE);
681         dev->wait = &unlink_wakeup;
682         temp = unlink_urbs(dev, &dev->txq) +
683                 unlink_urbs(dev, &dev->rxq);
684
685         /* maybe wait for deletions to finish. */
686         while (!skb_queue_empty(&dev->rxq)
687                 && !skb_queue_empty(&dev->txq)
688                 && !skb_queue_empty(&dev->done)) {
689                         schedule_timeout(msecs_to_jiffies(UNLINK_TIMEOUT_MS));
690                         set_current_state(TASK_UNINTERRUPTIBLE);
691                         netif_dbg(dev, ifdown, dev->net,
692                                   "waited for %d urb completions\n", temp);
693         }
694         set_current_state(TASK_RUNNING);
695         dev->wait = NULL;
696         remove_wait_queue(&unlink_wakeup, &wait);
697 }
698
699 int usbnet_stop (struct net_device *net)
700 {
701         struct usbnet           *dev = netdev_priv(net);
702         struct driver_info      *info = dev->driver_info;
703         int                     retval;
704
705         clear_bit(EVENT_DEV_OPEN, &dev->flags);
706         netif_stop_queue (net);
707
708         netif_info(dev, ifdown, dev->net,
709                    "stop stats: rx/tx %lu/%lu, errs %lu/%lu\n",
710                    net->stats.rx_packets, net->stats.tx_packets,
711                    net->stats.rx_errors, net->stats.tx_errors);
712
713         /* allow minidriver to stop correctly (wireless devices to turn off
714          * radio etc) */
715         if (info->stop) {
716                 retval = info->stop(dev);
717                 if (retval < 0)
718                         netif_info(dev, ifdown, dev->net,
719                                    "stop fail (%d) usbnet usb-%s-%s, %s\n",
720                                    retval,
721                                    dev->udev->bus->bus_name, dev->udev->devpath,
722                                    info->description);
723         }
724
725         if (!(info->flags & FLAG_AVOID_UNLINK_URBS))
726                 usbnet_terminate_urbs(dev);
727
728         usb_kill_urb(dev->interrupt);
729
730         usbnet_purge_paused_rxq(dev);
731
732         /* deferred work (task, timer, softirq) must also stop.
733          * can't flush_scheduled_work() until we drop rtnl (later),
734          * else workers could deadlock; so make workers a NOP.
735          */
736         dev->flags = 0;
737         del_timer_sync (&dev->delay);
738         tasklet_kill (&dev->bh);
739         if (info->manage_power &&
740             !test_and_clear_bit(EVENT_NO_RUNTIME_PM, &dev->flags))
741                 info->manage_power(dev, 0);
742         else
743                 usb_autopm_put_interface(dev->intf);
744
745         return 0;
746 }
747 EXPORT_SYMBOL_GPL(usbnet_stop);
748
749 /*-------------------------------------------------------------------------*/
750
751 // posts reads, and enables write queuing
752
753 // precondition: never called in_interrupt
754
755 int usbnet_open (struct net_device *net)
756 {
757         struct usbnet           *dev = netdev_priv(net);
758         int                     retval;
759         struct driver_info      *info = dev->driver_info;
760
761         if ((retval = usb_autopm_get_interface(dev->intf)) < 0) {
762                 netif_info(dev, ifup, dev->net,
763                            "resumption fail (%d) usbnet usb-%s-%s, %s\n",
764                            retval,
765                            dev->udev->bus->bus_name,
766                            dev->udev->devpath,
767                            info->description);
768                 goto done_nopm;
769         }
770
771         // put into "known safe" state
772         if (info->reset && (retval = info->reset (dev)) < 0) {
773                 netif_info(dev, ifup, dev->net,
774                            "open reset fail (%d) usbnet usb-%s-%s, %s\n",
775                            retval,
776                            dev->udev->bus->bus_name,
777                            dev->udev->devpath,
778                            info->description);
779                 goto done;
780         }
781
782         // insist peer be connected
783         if (info->check_connect && (retval = info->check_connect (dev)) < 0) {
784                 netif_dbg(dev, ifup, dev->net, "can't open; %d\n", retval);
785                 goto done;
786         }
787
788         /* start any status interrupt transfer */
789         if (dev->interrupt) {
790                 retval = usb_submit_urb (dev->interrupt, GFP_KERNEL);
791                 if (retval < 0) {
792                         netif_err(dev, ifup, dev->net,
793                                   "intr submit %d\n", retval);
794                         goto done;
795                 }
796         }
797
798         set_bit(EVENT_DEV_OPEN, &dev->flags);
799         netif_start_queue (net);
800         netif_info(dev, ifup, dev->net,
801                    "open: enable queueing (rx %d, tx %d) mtu %d %s framing\n",
802                    (int)RX_QLEN(dev), (int)TX_QLEN(dev),
803                    dev->net->mtu,
804                    (dev->driver_info->flags & FLAG_FRAMING_NC) ? "NetChip" :
805                    (dev->driver_info->flags & FLAG_FRAMING_GL) ? "GeneSys" :
806                    (dev->driver_info->flags & FLAG_FRAMING_Z) ? "Zaurus" :
807                    (dev->driver_info->flags & FLAG_FRAMING_RN) ? "RNDIS" :
808                    (dev->driver_info->flags & FLAG_FRAMING_AX) ? "ASIX" :
809                    "simple");
810
811         /* reset rx error state */
812         dev->pkt_cnt = 0;
813         dev->pkt_err = 0;
814         clear_bit(EVENT_RX_KILL, &dev->flags);
815
816         // delay posting reads until we're fully open
817         tasklet_schedule (&dev->bh);
818         if (info->manage_power) {
819                 retval = info->manage_power(dev, 1);
820                 if (retval < 0) {
821                         retval = 0;
822                         set_bit(EVENT_NO_RUNTIME_PM, &dev->flags);
823                 } else {
824                         usb_autopm_put_interface(dev->intf);
825                 }
826         }
827         return retval;
828 done:
829         usb_autopm_put_interface(dev->intf);
830 done_nopm:
831         return retval;
832 }
833 EXPORT_SYMBOL_GPL(usbnet_open);
834
835 /*-------------------------------------------------------------------------*/
836
837 /* ethtool methods; minidrivers may need to add some more, but
838  * they'll probably want to use this base set.
839  */
840
841 int usbnet_get_settings (struct net_device *net, struct ethtool_cmd *cmd)
842 {
843         struct usbnet *dev = netdev_priv(net);
844
845         if (!dev->mii.mdio_read)
846                 return -EOPNOTSUPP;
847
848         return mii_ethtool_gset(&dev->mii, cmd);
849 }
850 EXPORT_SYMBOL_GPL(usbnet_get_settings);
851
852 int usbnet_set_settings (struct net_device *net, struct ethtool_cmd *cmd)
853 {
854         struct usbnet *dev = netdev_priv(net);
855         int retval;
856
857         if (!dev->mii.mdio_write)
858                 return -EOPNOTSUPP;
859
860         retval = mii_ethtool_sset(&dev->mii, cmd);
861
862         /* link speed/duplex might have changed */
863         if (dev->driver_info->link_reset)
864                 dev->driver_info->link_reset(dev);
865
866         return retval;
867
868 }
869 EXPORT_SYMBOL_GPL(usbnet_set_settings);
870
871 u32 usbnet_get_link (struct net_device *net)
872 {
873         struct usbnet *dev = netdev_priv(net);
874
875         /* If a check_connect is defined, return its result */
876         if (dev->driver_info->check_connect)
877                 return dev->driver_info->check_connect (dev) == 0;
878
879         /* if the device has mii operations, use those */
880         if (dev->mii.mdio_read)
881                 return mii_link_ok(&dev->mii);
882
883         /* Otherwise, dtrt for drivers calling netif_carrier_{on,off} */
884         return ethtool_op_get_link(net);
885 }
886 EXPORT_SYMBOL_GPL(usbnet_get_link);
887
888 int usbnet_nway_reset(struct net_device *net)
889 {
890         struct usbnet *dev = netdev_priv(net);
891
892         if (!dev->mii.mdio_write)
893                 return -EOPNOTSUPP;
894
895         return mii_nway_restart(&dev->mii);
896 }
897 EXPORT_SYMBOL_GPL(usbnet_nway_reset);
898
899 void usbnet_get_drvinfo (struct net_device *net, struct ethtool_drvinfo *info)
900 {
901         struct usbnet *dev = netdev_priv(net);
902
903         strlcpy (info->driver, dev->driver_name, sizeof info->driver);
904         strlcpy (info->version, DRIVER_VERSION, sizeof info->version);
905         strlcpy (info->fw_version, dev->driver_info->description,
906                 sizeof info->fw_version);
907         usb_make_path (dev->udev, info->bus_info, sizeof info->bus_info);
908 }
909 EXPORT_SYMBOL_GPL(usbnet_get_drvinfo);
910
911 u32 usbnet_get_msglevel (struct net_device *net)
912 {
913         struct usbnet *dev = netdev_priv(net);
914
915         return dev->msg_enable;
916 }
917 EXPORT_SYMBOL_GPL(usbnet_get_msglevel);
918
919 void usbnet_set_msglevel (struct net_device *net, u32 level)
920 {
921         struct usbnet *dev = netdev_priv(net);
922
923         dev->msg_enable = level;
924 }
925 EXPORT_SYMBOL_GPL(usbnet_set_msglevel);
926
927 /* drivers may override default ethtool_ops in their bind() routine */
928 static const struct ethtool_ops usbnet_ethtool_ops = {
929         .get_settings           = usbnet_get_settings,
930         .set_settings           = usbnet_set_settings,
931         .get_link               = usbnet_get_link,
932         .nway_reset             = usbnet_nway_reset,
933         .get_drvinfo            = usbnet_get_drvinfo,
934         .get_msglevel           = usbnet_get_msglevel,
935         .set_msglevel           = usbnet_set_msglevel,
936         .get_ts_info            = ethtool_op_get_ts_info,
937 };
938
939 /*-------------------------------------------------------------------------*/
940
941 /* work that cannot be done in interrupt context uses keventd.
942  *
943  * NOTE:  with 2.5 we could do more of this using completion callbacks,
944  * especially now that control transfers can be queued.
945  */
946 static void
947 kevent (struct work_struct *work)
948 {
949         struct usbnet           *dev =
950                 container_of(work, struct usbnet, kevent);
951         int                     status;
952
953         /* usb_clear_halt() needs a thread context */
954         if (test_bit (EVENT_TX_HALT, &dev->flags)) {
955                 unlink_urbs (dev, &dev->txq);
956                 status = usb_autopm_get_interface(dev->intf);
957                 if (status < 0)
958                         goto fail_pipe;
959                 status = usb_clear_halt (dev->udev, dev->out);
960                 usb_autopm_put_interface(dev->intf);
961                 if (status < 0 &&
962                     status != -EPIPE &&
963                     status != -ESHUTDOWN) {
964                         if (netif_msg_tx_err (dev))
965 fail_pipe:
966                                 netdev_err(dev->net, "can't clear tx halt, status %d\n",
967                                            status);
968                 } else {
969                         clear_bit (EVENT_TX_HALT, &dev->flags);
970                         if (status != -ESHUTDOWN)
971                                 netif_wake_queue (dev->net);
972                 }
973         }
974         if (test_bit (EVENT_RX_HALT, &dev->flags)) {
975                 unlink_urbs (dev, &dev->rxq);
976                 status = usb_autopm_get_interface(dev->intf);
977                 if (status < 0)
978                         goto fail_halt;
979                 status = usb_clear_halt (dev->udev, dev->in);
980                 usb_autopm_put_interface(dev->intf);
981                 if (status < 0 &&
982                     status != -EPIPE &&
983                     status != -ESHUTDOWN) {
984                         if (netif_msg_rx_err (dev))
985 fail_halt:
986                                 netdev_err(dev->net, "can't clear rx halt, status %d\n",
987                                            status);
988                 } else {
989                         clear_bit (EVENT_RX_HALT, &dev->flags);
990                         tasklet_schedule (&dev->bh);
991                 }
992         }
993
994         /* tasklet could resubmit itself forever if memory is tight */
995         if (test_bit (EVENT_RX_MEMORY, &dev->flags)) {
996                 struct urb      *urb = NULL;
997                 int resched = 1;
998
999                 if (netif_running (dev->net))
1000                         urb = usb_alloc_urb (0, GFP_KERNEL);
1001                 else
1002                         clear_bit (EVENT_RX_MEMORY, &dev->flags);
1003                 if (urb != NULL) {
1004                         clear_bit (EVENT_RX_MEMORY, &dev->flags);
1005                         status = usb_autopm_get_interface(dev->intf);
1006                         if (status < 0) {
1007                                 usb_free_urb(urb);
1008                                 goto fail_lowmem;
1009                         }
1010                         if (rx_submit (dev, urb, GFP_KERNEL) == -ENOLINK)
1011                                 resched = 0;
1012                         usb_autopm_put_interface(dev->intf);
1013 fail_lowmem:
1014                         if (resched)
1015                                 tasklet_schedule (&dev->bh);
1016                 }
1017         }
1018
1019         if (test_bit (EVENT_LINK_RESET, &dev->flags)) {
1020                 struct driver_info      *info = dev->driver_info;
1021                 int                     retval = 0;
1022
1023                 clear_bit (EVENT_LINK_RESET, &dev->flags);
1024                 status = usb_autopm_get_interface(dev->intf);
1025                 if (status < 0)
1026                         goto skip_reset;
1027                 if(info->link_reset && (retval = info->link_reset(dev)) < 0) {
1028                         usb_autopm_put_interface(dev->intf);
1029 skip_reset:
1030                         netdev_info(dev->net, "link reset failed (%d) usbnet usb-%s-%s, %s\n",
1031                                     retval,
1032                                     dev->udev->bus->bus_name,
1033                                     dev->udev->devpath,
1034                                     info->description);
1035                 } else {
1036                         usb_autopm_put_interface(dev->intf);
1037                 }
1038         }
1039
1040         if (dev->flags)
1041                 netdev_dbg(dev->net, "kevent done, flags = 0x%lx\n", dev->flags);
1042 }
1043
1044 /*-------------------------------------------------------------------------*/
1045
1046 static void tx_complete (struct urb *urb)
1047 {
1048         struct sk_buff          *skb = (struct sk_buff *) urb->context;
1049         struct skb_data         *entry = (struct skb_data *) skb->cb;
1050         struct usbnet           *dev = entry->dev;
1051
1052         if (urb->status == 0) {
1053                 if (!(dev->driver_info->flags & FLAG_MULTI_PACKET))
1054                         dev->net->stats.tx_packets++;
1055                 dev->net->stats.tx_bytes += entry->length;
1056         } else {
1057                 dev->net->stats.tx_errors++;
1058
1059                 switch (urb->status) {
1060                 case -EPIPE:
1061                         usbnet_defer_kevent (dev, EVENT_TX_HALT);
1062                         break;
1063
1064                 /* software-driven interface shutdown */
1065                 case -ECONNRESET:               // async unlink
1066                 case -ESHUTDOWN:                // hardware gone
1067                         break;
1068
1069                 // like rx, tx gets controller i/o faults during khubd delays
1070                 // and so it uses the same throttling mechanism.
1071                 case -EPROTO:
1072                 case -ETIME:
1073                 case -EILSEQ:
1074                         usb_mark_last_busy(dev->udev);
1075                         if (!timer_pending (&dev->delay)) {
1076                                 mod_timer (&dev->delay,
1077                                         jiffies + THROTTLE_JIFFIES);
1078                                 netif_dbg(dev, link, dev->net,
1079                                           "tx throttle %d\n", urb->status);
1080                         }
1081                         netif_stop_queue (dev->net);
1082                         break;
1083                 default:
1084                         netif_dbg(dev, tx_err, dev->net,
1085                                   "tx err %d\n", entry->urb->status);
1086                         break;
1087                 }
1088         }
1089
1090         usb_autopm_put_interface_async(dev->intf);
1091         (void) defer_bh(dev, skb, &dev->txq, tx_done);
1092 }
1093
1094 /*-------------------------------------------------------------------------*/
1095
1096 void usbnet_tx_timeout (struct net_device *net)
1097 {
1098         struct usbnet           *dev = netdev_priv(net);
1099
1100         unlink_urbs (dev, &dev->txq);
1101         tasklet_schedule (&dev->bh);
1102
1103         // FIXME: device recovery -- reset?
1104 }
1105 EXPORT_SYMBOL_GPL(usbnet_tx_timeout);
1106
1107 /*-------------------------------------------------------------------------*/
1108
1109 netdev_tx_t usbnet_start_xmit (struct sk_buff *skb,
1110                                      struct net_device *net)
1111 {
1112         struct usbnet           *dev = netdev_priv(net);
1113         int                     length;
1114         struct urb              *urb = NULL;
1115         struct skb_data         *entry;
1116         struct driver_info      *info = dev->driver_info;
1117         unsigned long           flags;
1118         int retval;
1119
1120         if (skb)
1121                 skb_tx_timestamp(skb);
1122
1123         // some devices want funky USB-level framing, for
1124         // win32 driver (usually) and/or hardware quirks
1125         if (info->tx_fixup) {
1126                 skb = info->tx_fixup (dev, skb, GFP_ATOMIC);
1127                 if (!skb) {
1128                         if (netif_msg_tx_err(dev)) {
1129                                 netif_dbg(dev, tx_err, dev->net, "can't tx_fixup skb\n");
1130                                 goto drop;
1131                         } else {
1132                                 /* cdc_ncm collected packet; waits for more */
1133                                 goto not_drop;
1134                         }
1135                 }
1136         }
1137         length = skb->len;
1138
1139         if (!(urb = usb_alloc_urb (0, GFP_ATOMIC))) {
1140                 netif_dbg(dev, tx_err, dev->net, "no urb\n");
1141                 goto drop;
1142         }
1143
1144         entry = (struct skb_data *) skb->cb;
1145         entry->urb = urb;
1146         entry->dev = dev;
1147         entry->length = length;
1148
1149         usb_fill_bulk_urb (urb, dev->udev, dev->out,
1150                         skb->data, skb->len, tx_complete, skb);
1151
1152         /* don't assume the hardware handles USB_ZERO_PACKET
1153          * NOTE:  strictly conforming cdc-ether devices should expect
1154          * the ZLP here, but ignore the one-byte packet.
1155          * NOTE2: CDC NCM specification is different from CDC ECM when
1156          * handling ZLP/short packets, so cdc_ncm driver will make short
1157          * packet itself if needed.
1158          */
1159         if (length % dev->maxpacket == 0) {
1160                 if (!(info->flags & FLAG_SEND_ZLP)) {
1161                         if (!(info->flags & FLAG_MULTI_PACKET)) {
1162                                 urb->transfer_buffer_length++;
1163                                 if (skb_tailroom(skb)) {
1164                                         skb->data[skb->len] = 0;
1165                                         __skb_put(skb, 1);
1166                                 }
1167                         }
1168                 } else
1169                         urb->transfer_flags |= URB_ZERO_PACKET;
1170         }
1171
1172         spin_lock_irqsave(&dev->txq.lock, flags);
1173         retval = usb_autopm_get_interface_async(dev->intf);
1174         if (retval < 0) {
1175                 spin_unlock_irqrestore(&dev->txq.lock, flags);
1176                 goto drop;
1177         }
1178
1179 #ifdef CONFIG_PM
1180         /* if this triggers the device is still a sleep */
1181         if (test_bit(EVENT_DEV_ASLEEP, &dev->flags)) {
1182                 /* transmission will be done in resume */
1183                 usb_anchor_urb(urb, &dev->deferred);
1184                 /* no use to process more packets */
1185                 netif_stop_queue(net);
1186                 usb_put_urb(urb);
1187                 spin_unlock_irqrestore(&dev->txq.lock, flags);
1188                 netdev_dbg(dev->net, "Delaying transmission for resumption\n");
1189                 goto deferred;
1190         }
1191 #endif
1192
1193         switch ((retval = usb_submit_urb (urb, GFP_ATOMIC))) {
1194         case -EPIPE:
1195                 netif_stop_queue (net);
1196                 usbnet_defer_kevent (dev, EVENT_TX_HALT);
1197                 usb_autopm_put_interface_async(dev->intf);
1198                 break;
1199         default:
1200                 usb_autopm_put_interface_async(dev->intf);
1201                 netif_dbg(dev, tx_err, dev->net,
1202                           "tx: submit urb err %d\n", retval);
1203                 break;
1204         case 0:
1205                 net->trans_start = jiffies;
1206                 __usbnet_queue_skb(&dev->txq, skb, tx_start);
1207                 if (dev->txq.qlen >= TX_QLEN (dev))
1208                         netif_stop_queue (net);
1209         }
1210         spin_unlock_irqrestore (&dev->txq.lock, flags);
1211
1212         if (retval) {
1213                 netif_dbg(dev, tx_err, dev->net, "drop, code %d\n", retval);
1214 drop:
1215                 dev->net->stats.tx_dropped++;
1216 not_drop:
1217                 if (skb)
1218                         dev_kfree_skb_any (skb);
1219                 usb_free_urb (urb);
1220         } else
1221                 netif_dbg(dev, tx_queued, dev->net,
1222                           "> tx, len %d, type 0x%x\n", length, skb->protocol);
1223 #ifdef CONFIG_PM
1224 deferred:
1225 #endif
1226         return NETDEV_TX_OK;
1227 }
1228 EXPORT_SYMBOL_GPL(usbnet_start_xmit);
1229
1230 static int rx_alloc_submit(struct usbnet *dev, gfp_t flags)
1231 {
1232         struct urb      *urb;
1233         int             i;
1234         int             ret = 0;
1235
1236         /* don't refill the queue all at once */
1237         for (i = 0; i < 10 && dev->rxq.qlen < RX_QLEN(dev); i++) {
1238                 urb = usb_alloc_urb(0, flags);
1239                 if (urb != NULL) {
1240                         ret = rx_submit(dev, urb, flags);
1241                         if (ret)
1242                                 goto err;
1243                 } else {
1244                         ret = -ENOMEM;
1245                         goto err;
1246                 }
1247         }
1248 err:
1249         return ret;
1250 }
1251
1252 /*-------------------------------------------------------------------------*/
1253
1254 // tasklet (work deferred from completions, in_irq) or timer
1255
1256 static void usbnet_bh (unsigned long param)
1257 {
1258         struct usbnet           *dev = (struct usbnet *) param;
1259         struct sk_buff          *skb;
1260         struct skb_data         *entry;
1261
1262         while ((skb = skb_dequeue (&dev->done))) {
1263                 entry = (struct skb_data *) skb->cb;
1264                 switch (entry->state) {
1265                 case rx_done:
1266                         entry->state = rx_cleanup;
1267                         rx_process (dev, skb);
1268                         continue;
1269                 case tx_done:
1270                 case rx_cleanup:
1271                         usb_free_urb (entry->urb);
1272                         dev_kfree_skb (skb);
1273                         continue;
1274                 default:
1275                         netdev_dbg(dev->net, "bogus skb state %d\n", entry->state);
1276                 }
1277         }
1278
1279         /* restart RX again after disabling due to high error rate */
1280         clear_bit(EVENT_RX_KILL, &dev->flags);
1281
1282         // waiting for all pending urbs to complete?
1283         if (dev->wait) {
1284                 if ((dev->txq.qlen + dev->rxq.qlen + dev->done.qlen) == 0) {
1285                         wake_up (dev->wait);
1286                 }
1287
1288         // or are we maybe short a few urbs?
1289         } else if (netif_running (dev->net) &&
1290                    netif_device_present (dev->net) &&
1291                    !timer_pending (&dev->delay) &&
1292                    !test_bit (EVENT_RX_HALT, &dev->flags)) {
1293                 int     temp = dev->rxq.qlen;
1294
1295                 if (temp < RX_QLEN(dev)) {
1296                         if (rx_alloc_submit(dev, GFP_ATOMIC) == -ENOLINK)
1297                                 return;
1298                         if (temp != dev->rxq.qlen)
1299                                 netif_dbg(dev, link, dev->net,
1300                                           "rxqlen %d --> %d\n",
1301                                           temp, dev->rxq.qlen);
1302                         if (dev->rxq.qlen < RX_QLEN(dev))
1303                                 tasklet_schedule (&dev->bh);
1304                 }
1305                 if (dev->txq.qlen < TX_QLEN (dev))
1306                         netif_wake_queue (dev->net);
1307         }
1308 }
1309
1310
1311 /*-------------------------------------------------------------------------
1312  *
1313  * USB Device Driver support
1314  *
1315  *-------------------------------------------------------------------------*/
1316
1317 // precondition: never called in_interrupt
1318
1319 void usbnet_disconnect (struct usb_interface *intf)
1320 {
1321         struct usbnet           *dev;
1322         struct usb_device       *xdev;
1323         struct net_device       *net;
1324
1325         dev = usb_get_intfdata(intf);
1326         usb_set_intfdata(intf, NULL);
1327         if (!dev)
1328                 return;
1329
1330         xdev = interface_to_usbdev (intf);
1331
1332         netif_info(dev, probe, dev->net, "unregister '%s' usb-%s-%s, %s\n",
1333                    intf->dev.driver->name,
1334                    xdev->bus->bus_name, xdev->devpath,
1335                    dev->driver_info->description);
1336
1337         net = dev->net;
1338         unregister_netdev (net);
1339
1340         cancel_work_sync(&dev->kevent);
1341
1342         usb_scuttle_anchored_urbs(&dev->deferred);
1343
1344         if (dev->driver_info->unbind)
1345                 dev->driver_info->unbind (dev, intf);
1346
1347         usb_kill_urb(dev->interrupt);
1348         usb_free_urb(dev->interrupt);
1349
1350         free_netdev(net);
1351 }
1352 EXPORT_SYMBOL_GPL(usbnet_disconnect);
1353
1354 static const struct net_device_ops usbnet_netdev_ops = {
1355         .ndo_open               = usbnet_open,
1356         .ndo_stop               = usbnet_stop,
1357         .ndo_start_xmit         = usbnet_start_xmit,
1358         .ndo_tx_timeout         = usbnet_tx_timeout,
1359         .ndo_change_mtu         = usbnet_change_mtu,
1360         .ndo_set_mac_address    = eth_mac_addr,
1361         .ndo_validate_addr      = eth_validate_addr,
1362 };
1363
1364 /*-------------------------------------------------------------------------*/
1365
1366 // precondition: never called in_interrupt
1367
1368 static struct device_type wlan_type = {
1369         .name   = "wlan",
1370 };
1371
1372 static struct device_type wwan_type = {
1373         .name   = "wwan",
1374 };
1375
1376 int
1377 usbnet_probe (struct usb_interface *udev, const struct usb_device_id *prod)
1378 {
1379         struct usbnet                   *dev;
1380         struct net_device               *net;
1381         struct usb_host_interface       *interface;
1382         struct driver_info              *info;
1383         struct usb_device               *xdev;
1384         int                             status;
1385         const char                      *name;
1386         struct usb_driver       *driver = to_usb_driver(udev->dev.driver);
1387
1388         /* usbnet already took usb runtime pm, so have to enable the feature
1389          * for usb interface, otherwise usb_autopm_get_interface may return
1390          * failure if USB_SUSPEND(RUNTIME_PM) is enabled.
1391          */
1392         if (!driver->supports_autosuspend) {
1393                 driver->supports_autosuspend = 1;
1394                 pm_runtime_enable(&udev->dev);
1395         }
1396
1397         name = udev->dev.driver->name;
1398         info = (struct driver_info *) prod->driver_info;
1399         if (!info) {
1400                 dev_dbg (&udev->dev, "blacklisted by %s\n", name);
1401                 return -ENODEV;
1402         }
1403         xdev = interface_to_usbdev (udev);
1404         interface = udev->cur_altsetting;
1405
1406         status = -ENOMEM;
1407
1408         // set up our own records
1409         net = alloc_etherdev(sizeof(*dev));
1410         if (!net)
1411                 goto out;
1412
1413         /* netdev_printk() needs this so do it as early as possible */
1414         SET_NETDEV_DEV(net, &udev->dev);
1415
1416         dev = netdev_priv(net);
1417         dev->udev = xdev;
1418         dev->intf = udev;
1419         dev->driver_info = info;
1420         dev->driver_name = name;
1421         dev->msg_enable = netif_msg_init (msg_level, NETIF_MSG_DRV
1422                                 | NETIF_MSG_PROBE | NETIF_MSG_LINK);
1423         skb_queue_head_init (&dev->rxq);
1424         skb_queue_head_init (&dev->txq);
1425         skb_queue_head_init (&dev->done);
1426         skb_queue_head_init(&dev->rxq_pause);
1427         dev->bh.func = usbnet_bh;
1428         dev->bh.data = (unsigned long) dev;
1429         INIT_WORK (&dev->kevent, kevent);
1430         init_usb_anchor(&dev->deferred);
1431         dev->delay.function = usbnet_bh;
1432         dev->delay.data = (unsigned long) dev;
1433         init_timer (&dev->delay);
1434         mutex_init (&dev->phy_mutex);
1435
1436         dev->net = net;
1437         strcpy (net->name, "usb%d");
1438         memcpy (net->dev_addr, node_id, sizeof node_id);
1439
1440         /* rx and tx sides can use different message sizes;
1441          * bind() should set rx_urb_size in that case.
1442          */
1443         dev->hard_mtu = net->mtu + net->hard_header_len;
1444 #if 0
1445 // dma_supported() is deeply broken on almost all architectures
1446         // possible with some EHCI controllers
1447         if (dma_supported (&udev->dev, DMA_BIT_MASK(64)))
1448                 net->features |= NETIF_F_HIGHDMA;
1449 #endif
1450
1451         net->netdev_ops = &usbnet_netdev_ops;
1452         net->watchdog_timeo = TX_TIMEOUT_JIFFIES;
1453         net->ethtool_ops = &usbnet_ethtool_ops;
1454
1455         // allow device-specific bind/init procedures
1456         // NOTE net->name still not usable ...
1457         if (info->bind) {
1458                 status = info->bind (dev, udev);
1459                 if (status < 0)
1460                         goto out1;
1461
1462                 // heuristic:  "usb%d" for links we know are two-host,
1463                 // else "eth%d" when there's reasonable doubt.  userspace
1464                 // can rename the link if it knows better.
1465                 if ((dev->driver_info->flags & FLAG_ETHER) != 0 &&
1466                     ((dev->driver_info->flags & FLAG_POINTTOPOINT) == 0 ||
1467                      (net->dev_addr [0] & 0x02) == 0))
1468                         strcpy (net->name, "eth%d");
1469                 /* WLAN devices should always be named "wlan%d" */
1470                 if ((dev->driver_info->flags & FLAG_WLAN) != 0)
1471                         strcpy(net->name, "wlan%d");
1472                 /* WWAN devices should always be named "wwan%d" */
1473                 if ((dev->driver_info->flags & FLAG_WWAN) != 0)
1474                         strcpy(net->name, "wwan%d");
1475
1476                 /* devices that cannot do ARP */
1477                 if ((dev->driver_info->flags & FLAG_NOARP) != 0)
1478                         net->flags |= IFF_NOARP;
1479
1480                 /* maybe the remote can't receive an Ethernet MTU */
1481                 if (net->mtu > (dev->hard_mtu - net->hard_header_len))
1482                         net->mtu = dev->hard_mtu - net->hard_header_len;
1483         } else if (!info->in || !info->out)
1484                 status = usbnet_get_endpoints (dev, udev);
1485         else {
1486                 dev->in = usb_rcvbulkpipe (xdev, info->in);
1487                 dev->out = usb_sndbulkpipe (xdev, info->out);
1488                 if (!(info->flags & FLAG_NO_SETINT))
1489                         status = usb_set_interface (xdev,
1490                                 interface->desc.bInterfaceNumber,
1491                                 interface->desc.bAlternateSetting);
1492                 else
1493                         status = 0;
1494
1495         }
1496         if (status >= 0 && dev->status)
1497                 status = init_status (dev, udev);
1498         if (status < 0)
1499                 goto out3;
1500
1501         if (!dev->rx_urb_size)
1502                 dev->rx_urb_size = dev->hard_mtu;
1503         dev->maxpacket = usb_maxpacket (dev->udev, dev->out, 1);
1504
1505         if ((dev->driver_info->flags & FLAG_WLAN) != 0)
1506                 SET_NETDEV_DEVTYPE(net, &wlan_type);
1507         if ((dev->driver_info->flags & FLAG_WWAN) != 0)
1508                 SET_NETDEV_DEVTYPE(net, &wwan_type);
1509
1510         status = register_netdev (net);
1511         if (status)
1512                 goto out4;
1513         netif_info(dev, probe, dev->net,
1514                    "register '%s' at usb-%s-%s, %s, %pM\n",
1515                    udev->dev.driver->name,
1516                    xdev->bus->bus_name, xdev->devpath,
1517                    dev->driver_info->description,
1518                    net->dev_addr);
1519
1520         // ok, it's ready to go.
1521         usb_set_intfdata (udev, dev);
1522
1523         netif_device_attach (net);
1524
1525         if (dev->driver_info->flags & FLAG_LINK_INTR)
1526                 netif_carrier_off(net);
1527
1528         return 0;
1529
1530 out4:
1531         usb_free_urb(dev->interrupt);
1532 out3:
1533         if (info->unbind)
1534                 info->unbind (dev, udev);
1535 out1:
1536         free_netdev(net);
1537 out:
1538         return status;
1539 }
1540 EXPORT_SYMBOL_GPL(usbnet_probe);
1541
1542 /*-------------------------------------------------------------------------*/
1543
1544 /*
1545  * suspend the whole driver as soon as the first interface is suspended
1546  * resume only when the last interface is resumed
1547  */
1548
1549 int usbnet_suspend (struct usb_interface *intf, pm_message_t message)
1550 {
1551         struct usbnet           *dev = usb_get_intfdata(intf);
1552
1553         if (!dev->suspend_count++) {
1554                 spin_lock_irq(&dev->txq.lock);
1555                 /* don't autosuspend while transmitting */
1556                 if (dev->txq.qlen && PMSG_IS_AUTO(message)) {
1557                         dev->suspend_count--;
1558                         spin_unlock_irq(&dev->txq.lock);
1559                         return -EBUSY;
1560                 } else {
1561                         set_bit(EVENT_DEV_ASLEEP, &dev->flags);
1562                         spin_unlock_irq(&dev->txq.lock);
1563                 }
1564                 /*
1565                  * accelerate emptying of the rx and queues, to avoid
1566                  * having everything error out.
1567                  */
1568                 netif_device_detach (dev->net);
1569                 usbnet_terminate_urbs(dev);
1570                 usb_kill_urb(dev->interrupt);
1571
1572                 /*
1573                  * reattach so runtime management can use and
1574                  * wake the device
1575                  */
1576                 netif_device_attach (dev->net);
1577         }
1578         return 0;
1579 }
1580 EXPORT_SYMBOL_GPL(usbnet_suspend);
1581
1582 int usbnet_resume (struct usb_interface *intf)
1583 {
1584         struct usbnet           *dev = usb_get_intfdata(intf);
1585         struct sk_buff          *skb;
1586         struct urb              *res;
1587         int                     retval;
1588
1589         if (!--dev->suspend_count) {
1590                 /* resume interrupt URBs */
1591                 if (dev->interrupt && test_bit(EVENT_DEV_OPEN, &dev->flags))
1592                         usb_submit_urb(dev->interrupt, GFP_NOIO);
1593
1594                 spin_lock_irq(&dev->txq.lock);
1595                 while ((res = usb_get_from_anchor(&dev->deferred))) {
1596
1597                         skb = (struct sk_buff *)res->context;
1598                         retval = usb_submit_urb(res, GFP_ATOMIC);
1599                         if (retval < 0) {
1600                                 dev_kfree_skb_any(skb);
1601                                 usb_free_urb(res);
1602                                 usb_autopm_put_interface_async(dev->intf);
1603                         } else {
1604                                 dev->net->trans_start = jiffies;
1605                                 __skb_queue_tail(&dev->txq, skb);
1606                         }
1607                 }
1608
1609                 smp_mb();
1610                 clear_bit(EVENT_DEV_ASLEEP, &dev->flags);
1611                 spin_unlock_irq(&dev->txq.lock);
1612
1613                 if (test_bit(EVENT_DEV_OPEN, &dev->flags)) {
1614                         /* handle remote wakeup ASAP */
1615                         if (!dev->wait &&
1616                                 netif_device_present(dev->net) &&
1617                                 !timer_pending(&dev->delay) &&
1618                                 !test_bit(EVENT_RX_HALT, &dev->flags))
1619                                         rx_alloc_submit(dev, GFP_NOIO);
1620
1621                         if (!(dev->txq.qlen >= TX_QLEN(dev)))
1622                                 netif_tx_wake_all_queues(dev->net);
1623                         tasklet_schedule (&dev->bh);
1624                 }
1625         }
1626
1627         if (test_and_clear_bit(EVENT_DEVICE_REPORT_IDLE, &dev->flags))
1628                 usb_autopm_get_interface_no_resume(intf);
1629
1630         return 0;
1631 }
1632 EXPORT_SYMBOL_GPL(usbnet_resume);
1633
1634 /*
1635  * Either a subdriver implements manage_power, then it is assumed to always
1636  * be ready to be suspended or it reports the readiness to be suspended
1637  * explicitly
1638  */
1639 void usbnet_device_suggests_idle(struct usbnet *dev)
1640 {
1641         if (!test_and_set_bit(EVENT_DEVICE_REPORT_IDLE, &dev->flags)) {
1642                 dev->intf->needs_remote_wakeup = 1;
1643                 usb_autopm_put_interface_async(dev->intf);
1644         }
1645 }
1646 EXPORT_SYMBOL(usbnet_device_suggests_idle);
1647
1648 /*
1649  * For devices that can do without special commands
1650  */
1651 int usbnet_manage_power(struct usbnet *dev, int on)
1652 {
1653         dev->intf->needs_remote_wakeup = on;
1654         return 0;
1655 }
1656 EXPORT_SYMBOL(usbnet_manage_power);
1657
1658 /*-------------------------------------------------------------------------*/
1659 static int __usbnet_read_cmd(struct usbnet *dev, u8 cmd, u8 reqtype,
1660                              u16 value, u16 index, void *data, u16 size)
1661 {
1662         void *buf = NULL;
1663         int err = -ENOMEM;
1664
1665         netdev_dbg(dev->net, "usbnet_read_cmd cmd=0x%02x reqtype=%02x"
1666                    " value=0x%04x index=0x%04x size=%d\n",
1667                    cmd, reqtype, value, index, size);
1668
1669         if (data) {
1670                 buf = kmalloc(size, GFP_KERNEL);
1671                 if (!buf)
1672                         goto out;
1673         }
1674
1675         err = usb_control_msg(dev->udev, usb_rcvctrlpipe(dev->udev, 0),
1676                               cmd, reqtype, value, index, buf, size,
1677                               USB_CTRL_GET_TIMEOUT);
1678         if (err > 0 && err <= size)
1679                 memcpy(data, buf, err);
1680         kfree(buf);
1681 out:
1682         return err;
1683 }
1684
1685 static int __usbnet_write_cmd(struct usbnet *dev, u8 cmd, u8 reqtype,
1686                               u16 value, u16 index, const void *data,
1687                               u16 size)
1688 {
1689         void *buf = NULL;
1690         int err = -ENOMEM;
1691
1692         netdev_dbg(dev->net, "usbnet_write_cmd cmd=0x%02x reqtype=%02x"
1693                    " value=0x%04x index=0x%04x size=%d\n",
1694                    cmd, reqtype, value, index, size);
1695
1696         if (data) {
1697                 buf = kmemdup(data, size, GFP_KERNEL);
1698                 if (!buf)
1699                         goto out;
1700         }
1701
1702         err = usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, 0),
1703                               cmd, reqtype, value, index, buf, size,
1704                               USB_CTRL_SET_TIMEOUT);
1705         kfree(buf);
1706
1707 out:
1708         return err;
1709 }
1710
1711 /*
1712  * The function can't be called inside suspend/resume callback,
1713  * otherwise deadlock will be caused.
1714  */
1715 int usbnet_read_cmd(struct usbnet *dev, u8 cmd, u8 reqtype,
1716                     u16 value, u16 index, void *data, u16 size)
1717 {
1718         int ret;
1719
1720         if (usb_autopm_get_interface(dev->intf) < 0)
1721                 return -ENODEV;
1722         ret = __usbnet_read_cmd(dev, cmd, reqtype, value, index,
1723                                 data, size);
1724         usb_autopm_put_interface(dev->intf);
1725         return ret;
1726 }
1727 EXPORT_SYMBOL_GPL(usbnet_read_cmd);
1728
1729 /*
1730  * The function can't be called inside suspend/resume callback,
1731  * otherwise deadlock will be caused.
1732  */
1733 int usbnet_write_cmd(struct usbnet *dev, u8 cmd, u8 reqtype,
1734                      u16 value, u16 index, const void *data, u16 size)
1735 {
1736         int ret;
1737
1738         if (usb_autopm_get_interface(dev->intf) < 0)
1739                 return -ENODEV;
1740         ret = __usbnet_write_cmd(dev, cmd, reqtype, value, index,
1741                                  data, size);
1742         usb_autopm_put_interface(dev->intf);
1743         return ret;
1744 }
1745 EXPORT_SYMBOL_GPL(usbnet_write_cmd);
1746
1747 /*
1748  * The function can be called inside suspend/resume callback safely
1749  * and should only be called by suspend/resume callback generally.
1750  */
1751 int usbnet_read_cmd_nopm(struct usbnet *dev, u8 cmd, u8 reqtype,
1752                           u16 value, u16 index, void *data, u16 size)
1753 {
1754         return __usbnet_read_cmd(dev, cmd, reqtype, value, index,
1755                                  data, size);
1756 }
1757 EXPORT_SYMBOL_GPL(usbnet_read_cmd_nopm);
1758
1759 /*
1760  * The function can be called inside suspend/resume callback safely
1761  * and should only be called by suspend/resume callback generally.
1762  */
1763 int usbnet_write_cmd_nopm(struct usbnet *dev, u8 cmd, u8 reqtype,
1764                           u16 value, u16 index, const void *data,
1765                           u16 size)
1766 {
1767         return __usbnet_write_cmd(dev, cmd, reqtype, value, index,
1768                                   data, size);
1769 }
1770 EXPORT_SYMBOL_GPL(usbnet_write_cmd_nopm);
1771
1772 static void usbnet_async_cmd_cb(struct urb *urb)
1773 {
1774         struct usb_ctrlrequest *req = (struct usb_ctrlrequest *)urb->context;
1775         int status = urb->status;
1776
1777         if (status < 0)
1778                 dev_dbg(&urb->dev->dev, "%s failed with %d",
1779                         __func__, status);
1780
1781         kfree(req);
1782         usb_free_urb(urb);
1783 }
1784
1785 /*
1786  * The caller must make sure that device can't be put into suspend
1787  * state until the control URB completes.
1788  */
1789 int usbnet_write_cmd_async(struct usbnet *dev, u8 cmd, u8 reqtype,
1790                            u16 value, u16 index, const void *data, u16 size)
1791 {
1792         struct usb_ctrlrequest *req = NULL;
1793         struct urb *urb;
1794         int err = -ENOMEM;
1795         void *buf = NULL;
1796
1797         netdev_dbg(dev->net, "usbnet_write_cmd cmd=0x%02x reqtype=%02x"
1798                    " value=0x%04x index=0x%04x size=%d\n",
1799                    cmd, reqtype, value, index, size);
1800
1801         urb = usb_alloc_urb(0, GFP_ATOMIC);
1802         if (!urb) {
1803                 netdev_err(dev->net, "Error allocating URB in"
1804                            " %s!\n", __func__);
1805                 goto fail;
1806         }
1807
1808         if (data) {
1809                 buf = kmemdup(data, size, GFP_ATOMIC);
1810                 if (!buf) {
1811                         netdev_err(dev->net, "Error allocating buffer"
1812                                    " in %s!\n", __func__);
1813                         goto fail_free;
1814                 }
1815         }
1816
1817         req = kmalloc(sizeof(struct usb_ctrlrequest), GFP_ATOMIC);
1818         if (!req) {
1819                 netdev_err(dev->net, "Failed to allocate memory for %s\n",
1820                            __func__);
1821                 goto fail_free_buf;
1822         }
1823
1824         req->bRequestType = reqtype;
1825         req->bRequest = cmd;
1826         req->wValue = cpu_to_le16(value);
1827         req->wIndex = cpu_to_le16(index);
1828         req->wLength = cpu_to_le16(size);
1829
1830         usb_fill_control_urb(urb, dev->udev,
1831                              usb_sndctrlpipe(dev->udev, 0),
1832                              (void *)req, buf, size,
1833                              usbnet_async_cmd_cb, req);
1834         urb->transfer_flags |= URB_FREE_BUFFER;
1835
1836         err = usb_submit_urb(urb, GFP_ATOMIC);
1837         if (err < 0) {
1838                 netdev_err(dev->net, "Error submitting the control"
1839                            " message: status=%d\n", err);
1840                 goto fail_free;
1841         }
1842         return 0;
1843
1844 fail_free_buf:
1845         kfree(buf);
1846 fail_free:
1847         kfree(req);
1848         usb_free_urb(urb);
1849 fail:
1850         return err;
1851
1852 }
1853 EXPORT_SYMBOL_GPL(usbnet_write_cmd_async);
1854 /*-------------------------------------------------------------------------*/
1855
1856 static int __init usbnet_init(void)
1857 {
1858         /* Compiler should optimize this out. */
1859         BUILD_BUG_ON(
1860                 FIELD_SIZEOF(struct sk_buff, cb) < sizeof(struct skb_data));
1861
1862         eth_random_addr(node_id);
1863         return 0;
1864 }
1865 module_init(usbnet_init);
1866
1867 static void __exit usbnet_exit(void)
1868 {
1869 }
1870 module_exit(usbnet_exit);
1871
1872 MODULE_AUTHOR("David Brownell");
1873 MODULE_DESCRIPTION("USB network driver framework");
1874 MODULE_LICENSE("GPL");