Linux 3.9-rc8
[firefly-linux-kernel-4.4.55.git] / drivers / net / wireless / brcm80211 / brcmfmac / dhd_dbg.h
1 /*
2  * Copyright (c) 2010 Broadcom Corporation
3  *
4  * Permission to use, copy, modify, and/or distribute this software for any
5  * purpose with or without fee is hereby granted, provided that the above
6  * copyright notice and this permission notice appear in all copies.
7  *
8  * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
9  * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
10  * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
11  * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
12  * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
13  * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
14  * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
15  */
16
17 #ifndef _BRCMF_DBG_H_
18 #define _BRCMF_DBG_H_
19
20 /* message levels */
21 #define BRCMF_TRACE_VAL 0x00000002
22 #define BRCMF_INFO_VAL  0x00000004
23 #define BRCMF_DATA_VAL  0x00000008
24 #define BRCMF_CTL_VAL   0x00000010
25 #define BRCMF_TIMER_VAL 0x00000020
26 #define BRCMF_HDRS_VAL  0x00000040
27 #define BRCMF_BYTES_VAL 0x00000080
28 #define BRCMF_INTR_VAL  0x00000100
29 #define BRCMF_GLOM_VAL  0x00000200
30 #define BRCMF_EVENT_VAL 0x00000400
31 #define BRCMF_BTA_VAL   0x00000800
32 #define BRCMF_FIL_VAL   0x00001000
33 #define BRCMF_USB_VAL   0x00002000
34 #define BRCMF_SCAN_VAL  0x00004000
35 #define BRCMF_CONN_VAL  0x00008000
36 #define BRCMF_CDC_VAL   0x00010000
37
38 /* set default print format */
39 #undef pr_fmt
40 #define pr_fmt(fmt)             KBUILD_MODNAME ": " fmt
41
42 /* Macro for error messages. net_ratelimit() is used when driver
43  * debugging is not selected. When debugging the driver error
44  * messages are as important as other tracing or even more so.
45  */
46 #ifdef CONFIG_BRCMDBG
47 #define brcmf_err(fmt, ...)     pr_err("%s: " fmt, __func__, ##__VA_ARGS__)
48 #else
49 #define brcmf_err(fmt, ...)                                             \
50         do {                                                            \
51                 if (net_ratelimit())                                    \
52                         pr_err("%s: " fmt, __func__, ##__VA_ARGS__);    \
53         } while (0)
54 #endif
55
56 #if defined(DEBUG)
57
58 #define brcmf_dbg(level, fmt, ...)                              \
59 do {                                                            \
60         if (brcmf_msg_level & BRCMF_##level##_VAL)              \
61                 pr_debug("%s: " fmt, __func__, ##__VA_ARGS__);  \
62 } while (0)
63
64 #define BRCMF_DATA_ON()         (brcmf_msg_level & BRCMF_DATA_VAL)
65 #define BRCMF_CTL_ON()          (brcmf_msg_level & BRCMF_CTL_VAL)
66 #define BRCMF_HDRS_ON()         (brcmf_msg_level & BRCMF_HDRS_VAL)
67 #define BRCMF_BYTES_ON()        (brcmf_msg_level & BRCMF_BYTES_VAL)
68 #define BRCMF_GLOM_ON()         (brcmf_msg_level & BRCMF_GLOM_VAL)
69 #define BRCMF_EVENT_ON()        (brcmf_msg_level & BRCMF_EVENT_VAL)
70 #define BRCMF_FIL_ON()          (brcmf_msg_level & BRCMF_FIL_VAL)
71
72 #else   /* (defined DEBUG) || (defined DEBUG) */
73
74 #define brcmf_dbg(level, fmt, ...) no_printk(fmt, ##__VA_ARGS__)
75
76 #define BRCMF_DATA_ON()         0
77 #define BRCMF_CTL_ON()          0
78 #define BRCMF_HDRS_ON()         0
79 #define BRCMF_BYTES_ON()        0
80 #define BRCMF_GLOM_ON()         0
81 #define BRCMF_EVENT_ON()        0
82 #define BRCMF_FIL_ON()          0
83
84 #endif                          /* defined(DEBUG) */
85
86 #define brcmf_dbg_hex_dump(test, data, len, fmt, ...)                   \
87 do {                                                                    \
88         if (test)                                                       \
89                 brcmu_dbg_hex_dump(data, len, fmt, ##__VA_ARGS__);      \
90 } while (0)
91
92 extern int brcmf_msg_level;
93
94 /*
95  * hold counter variables used in brcmfmac sdio driver.
96  */
97 struct brcmf_sdio_count {
98         uint intrcount;         /* Count of device interrupt callbacks */
99         uint lastintrs;         /* Count as of last watchdog timer */
100         uint pollcnt;           /* Count of active polls */
101         uint regfails;          /* Count of R_REG failures */
102         uint tx_sderrs;         /* Count of tx attempts with sd errors */
103         uint fcqueued;          /* Tx packets that got queued */
104         uint rxrtx;             /* Count of rtx requests (NAK to dongle) */
105         uint rx_toolong;        /* Receive frames too long to receive */
106         uint rxc_errors;        /* SDIO errors when reading control frames */
107         uint rx_hdrfail;        /* SDIO errors on header reads */
108         uint rx_badhdr;         /* Bad received headers (roosync?) */
109         uint rx_badseq;         /* Mismatched rx sequence number */
110         uint fc_rcvd;           /* Number of flow-control events received */
111         uint fc_xoff;           /* Number which turned on flow-control */
112         uint fc_xon;            /* Number which turned off flow-control */
113         uint rxglomfail;        /* Failed deglom attempts */
114         uint rxglomframes;      /* Number of glom frames (superframes) */
115         uint rxglompkts;        /* Number of packets from glom frames */
116         uint f2rxhdrs;          /* Number of header reads */
117         uint f2rxdata;          /* Number of frame data reads */
118         uint f2txdata;          /* Number of f2 frame writes */
119         uint f1regdata;         /* Number of f1 register accesses */
120         uint tickcnt;           /* Number of watchdog been schedule */
121         ulong tx_ctlerrs;       /* Err of sending ctrl frames */
122         ulong tx_ctlpkts;       /* Ctrl frames sent to dongle */
123         ulong rx_ctlerrs;       /* Err of processing rx ctrl frames */
124         ulong rx_ctlpkts;       /* Ctrl frames processed from dongle */
125         ulong rx_readahead_cnt; /* packets where header read-ahead was used */
126 };
127
128 struct brcmf_pub;
129 #ifdef DEBUG
130 void brcmf_debugfs_init(void);
131 void brcmf_debugfs_exit(void);
132 int brcmf_debugfs_attach(struct brcmf_pub *drvr);
133 void brcmf_debugfs_detach(struct brcmf_pub *drvr);
134 struct dentry *brcmf_debugfs_get_devdir(struct brcmf_pub *drvr);
135 void brcmf_debugfs_create_sdio_count(struct brcmf_pub *drvr,
136                                      struct brcmf_sdio_count *sdcnt);
137 #else
138 static inline void brcmf_debugfs_init(void)
139 {
140 }
141 static inline void brcmf_debugfs_exit(void)
142 {
143 }
144 static inline int brcmf_debugfs_attach(struct brcmf_pub *drvr)
145 {
146         return 0;
147 }
148 static inline void brcmf_debugfs_detach(struct brcmf_pub *drvr)
149 {
150 }
151 #endif
152
153 #endif                          /* _BRCMF_DBG_H_ */