drivers/net/wireless/iwlwifi/iwl-5000.c

   1 /******************************************************************************
   2  *
   3  * Copyright(c) 2007-2008 Intel Corporation. All rights reserved.
   4  *
   5  * This program is free software; you can redistribute it and/or modify it
   6  * under the terms of version 2 of the GNU General Public License as
   7  * published by the Free Software Foundation.
   8  *
   9  * This program is distributed in the hope that it will be useful, but WITHOUT
  10  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
  11  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
  12  * more details.
  13  *
  14  * You should have received a copy of the GNU General Public License along with
  15  * this program; if not, write to the Free Software Foundation, Inc.,
  16  * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
  17  *
  18  * The full GNU General Public License is included in this distribution in the
  19  * file called LICENSE.
  20  *
  21  * Contact Information:
  22  * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
  23  *
  24  *****************************************************************************/
  25
  26 #include <linux/kernel.h>
  27 #include <linux/module.h>
  28 #include <linux/init.h>
  29 #include <linux/pci.h>
  30 #include <linux/dma-mapping.h>
  31 #include <linux/delay.h>
  32 #include <linux/skbuff.h>
  33 #include <linux/netdevice.h>
  34 #include <linux/wireless.h>
  35 #include <net/mac80211.h>
  36 #include <linux/etherdevice.h>
  37 #include <asm/unaligned.h>
  38
  39 #include "iwl-eeprom.h"
  40 #include "iwl-dev.h"
  41 #include "iwl-core.h"
  42 #include "iwl-io.h"
  43 #include "iwl-sta.h"
  44 #include "iwl-helpers.h"
  45 #include "iwl-5000-hw.h"
  46
  47 #define IWL5000_UCODE_API  "-1"
  48
  49 #define IWL5000_MODULE_FIRMWARE "iwlwifi-5000" IWL5000_UCODE_API ".ucode"
  50
  51 static const u16 iwl5000_default_queue_to_tx_fifo[] = {
  52         IWL_TX_FIFO_AC3,
  53         IWL_TX_FIFO_AC2,
  54         IWL_TX_FIFO_AC1,
  55         IWL_TX_FIFO_AC0,
  56         IWL50_CMD_FIFO_NUM,
  57         IWL_TX_FIFO_HCCA_1,
  58         IWL_TX_FIFO_HCCA_2
  59 };
  60
  61 /* FIXME: same implementation as 4965 */
  62 static int iwl5000_apm_stop_master(struct iwl_priv *priv)
  63 {
  64         int ret = 0;
  65         unsigned long flags;
  66
  67         spin_lock_irqsave(&priv->lock, flags);
  68
  69         /* set stop master bit */
  70         iwl_set_bit(priv, CSR_RESET, CSR_RESET_REG_FLAG_STOP_MASTER);
  71
  72         ret = iwl_poll_bit(priv, CSR_RESET,
  73                                   CSR_RESET_REG_FLAG_MASTER_DISABLED,
  74                                   CSR_RESET_REG_FLAG_MASTER_DISABLED, 100);
  75         if (ret < 0)
  76                 goto out;
  77
  78 out:
  79         spin_unlock_irqrestore(&priv->lock, flags);
  80         IWL_DEBUG_INFO("stop master\n");
  81
  82         return ret;
  83 }
  84
  85
  86 static int iwl5000_apm_init(struct iwl_priv *priv)
  87 {
  88         int ret = 0;
  89
  90         iwl_set_bit(priv, CSR_GIO_CHICKEN_BITS,
  91                     CSR_GIO_CHICKEN_BITS_REG_BIT_DIS_L0S_EXIT_TIMER);
  92
  93         /* disable L0s without affecting L1 :don't wait for ICH L0s bug W/A) */
  94         iwl_set_bit(priv, CSR_GIO_CHICKEN_BITS,
  95                     CSR_GIO_CHICKEN_BITS_REG_BIT_L1A_NO_L0S_RX);
  96
  97         /* Set FH wait threshold to maximum (HW error during stress W/A) */
  98         iwl_set_bit(priv, CSR_DBG_HPET_MEM_REG, CSR_DBG_HPET_MEM_REG_VAL);
  99
 100         /* enable HAP INTA to move device L1a -> L0s */
 101         iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
 102                     CSR_HW_IF_CONFIG_REG_BIT_HAP_WAKE_L1A);
 103
 104         iwl_set_bit(priv, CSR_ANA_PLL_CFG, CSR50_ANA_PLL_CFG_VAL);
 105
 106         /* set "initialization complete" bit to move adapter
 107          * D0U* --> D0A* state */
 108         iwl_set_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE);
 109
 110         /* wait for clock stabilization */
 111         ret = iwl_poll_bit(priv, CSR_GP_CNTRL,
 112                           CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY,
 113                           CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, 25000);
 114         if (ret < 0) {
 115                 IWL_DEBUG_INFO("Failed to init the card\n");
 116                 return ret;
 117         }
 118
 119         ret = iwl_grab_nic_access(priv);
 120         if (ret)
 121                 return ret;
 122
 123         /* enable DMA */
 124         iwl_write_prph(priv, APMG_CLK_EN_REG, APMG_CLK_VAL_DMA_CLK_RQT);
 125
 126         udelay(20);
 127
 128         /* disable L1-Active */
 129         iwl_set_bits_prph(priv, APMG_PCIDEV_STT_REG,
 130                           APMG_PCIDEV_STT_VAL_L1_ACT_DIS);
 131
 132         iwl_release_nic_access(priv);
 133
 134         return ret;
 135 }
 136
 137 /* FIXME: this is identical to 4965 */
 138 static void iwl5000_apm_stop(struct iwl_priv *priv)
 139 {
 140         unsigned long flags;
 141
 142         iwl5000_apm_stop_master(priv);
 143
 144         spin_lock_irqsave(&priv->lock, flags);
 145
 146         iwl_set_bit(priv, CSR_RESET, CSR_RESET_REG_FLAG_SW_RESET);
 147
 148         udelay(10);
 149
 150         /* clear "init complete"  move adapter D0A* --> D0U state */
 151         iwl_clear_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE);
 152
 153         spin_unlock_irqrestore(&priv->lock, flags);
 154 }
 155
 156
 157 static int iwl5000_apm_reset(struct iwl_priv *priv)
 158 {
 159         int ret = 0;
 160         unsigned long flags;
 161
 162         iwl5000_apm_stop_master(priv);
 163
 164         spin_lock_irqsave(&priv->lock, flags);
 165
 166         iwl_set_bit(priv, CSR_RESET, CSR_RESET_REG_FLAG_SW_RESET);
 167
 168         udelay(10);
 169
 170
 171         /* FIXME: put here L1A -L0S w/a */
 172
 173         iwl_set_bit(priv, CSR_ANA_PLL_CFG, CSR50_ANA_PLL_CFG_VAL);
 174
 175         /* set "initialization complete" bit to move adapter
 176          * D0U* --> D0A* state */
 177         iwl_set_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE);
 178
 179         /* wait for clock stabilization */
 180         ret = iwl_poll_bit(priv, CSR_GP_CNTRL,
 181                           CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY,
 182                           CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, 25000);
 183         if (ret < 0) {
 184                 IWL_DEBUG_INFO("Failed to init the card\n");
 185                 goto out;
 186         }
 187
 188         ret = iwl_grab_nic_access(priv);
 189         if (ret)
 190                 goto out;
 191
 192         /* enable DMA */
 193         iwl_write_prph(priv, APMG_CLK_EN_REG, APMG_CLK_VAL_DMA_CLK_RQT);
 194
 195         udelay(20);
 196
 197         /* disable L1-Active */
 198         iwl_set_bits_prph(priv, APMG_PCIDEV_STT_REG,
 199                           APMG_PCIDEV_STT_VAL_L1_ACT_DIS);
 200
 201         iwl_release_nic_access(priv);
 202
 203 out:
 204         spin_unlock_irqrestore(&priv->lock, flags);
 205
 206         return ret;
 207 }
 208
 209
 210 static void iwl5000_nic_config(struct iwl_priv *priv)
 211 {
 212         unsigned long flags;
 213         u16 radio_cfg;
 214         u16 link;
 215
 216         spin_lock_irqsave(&priv->lock, flags);
 217
 218         pci_read_config_word(priv->pci_dev, PCI_CFG_LINK_CTRL, &link);
 219
 220         /* L1 is enabled by BIOS */
 221         if ((link & PCI_CFG_LINK_CTRL_VAL_L1_EN) == PCI_CFG_LINK_CTRL_VAL_L1_EN)
 222                 /* disable L0S disabled L1A enabled */
 223                 iwl_set_bit(priv, CSR_GIO_REG, CSR_GIO_REG_VAL_L0S_ENABLED);
 224         else
 225                 /* L0S enabled L1A disabled */
 226                 iwl_clear_bit(priv, CSR_GIO_REG, CSR_GIO_REG_VAL_L0S_ENABLED);
 227
 228         radio_cfg = iwl_eeprom_query16(priv, EEPROM_RADIO_CONFIG);
 229
 230         /* write radio config values to register */
 231         if (EEPROM_RF_CFG_TYPE_MSK(radio_cfg) < EEPROM_5000_RF_CFG_TYPE_MAX)
 232                 iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
 233                             EEPROM_RF_CFG_TYPE_MSK(radio_cfg) |
 234                             EEPROM_RF_CFG_STEP_MSK(radio_cfg) |
 235                             EEPROM_RF_CFG_DASH_MSK(radio_cfg));
 236
 237         /* set CSR_HW_CONFIG_REG for uCode use */
 238         iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
 239                     CSR_HW_IF_CONFIG_REG_BIT_RADIO_SI |
 240                     CSR_HW_IF_CONFIG_REG_BIT_MAC_SI);
 241
 242         /* W/A : NIC is stuck in a reset state after Early PCIe power off
 243          * (PCIe power is lost before PERST# is asserted),
 244          * causing ME FW to lose ownership and not being able to obtain it back.
 245          */
 246         iwl_grab_nic_access(priv);
 247         iwl_set_bits_mask_prph(priv, APMG_PS_CTRL_REG,
 248                                 APMG_PS_CTRL_EARLY_PWR_OFF_RESET_DIS,
 249                                 ~APMG_PS_CTRL_EARLY_PWR_OFF_RESET_DIS);
 250         iwl_release_nic_access(priv);
 251
 252         spin_unlock_irqrestore(&priv->lock, flags);
 253 }
 254
 255
 256
 257 /*
 258  * EEPROM
 259  */
 260 static u32 eeprom_indirect_address(const struct iwl_priv *priv, u32 address)
 261 {
 262         u16 offset = 0;
 263
 264         if ((address & INDIRECT_ADDRESS) == 0)
 265                 return address;
 266
 267         switch (address & INDIRECT_TYPE_MSK) {
 268         case INDIRECT_HOST:
 269                 offset = iwl_eeprom_query16(priv, EEPROM_5000_LINK_HOST);
 270                 break;
 271         case INDIRECT_GENERAL:
 272                 offset = iwl_eeprom_query16(priv, EEPROM_5000_LINK_GENERAL);
 273                 break;
 274         case INDIRECT_REGULATORY:
 275                 offset = iwl_eeprom_query16(priv, EEPROM_5000_LINK_REGULATORY);
 276                 break;
 277         case INDIRECT_CALIBRATION:
 278                 offset = iwl_eeprom_query16(priv, EEPROM_5000_LINK_CALIBRATION);
 279                 break;
 280         case INDIRECT_PROCESS_ADJST:
 281                 offset = iwl_eeprom_query16(priv, EEPROM_5000_LINK_PROCESS_ADJST);
 282                 break;
 283         case INDIRECT_OTHERS:
 284                 offset = iwl_eeprom_query16(priv, EEPROM_5000_LINK_OTHERS);
 285                 break;
 286         default:
 287                 IWL_ERROR("illegal indirect type: 0x%X\n",
 288                 address & INDIRECT_TYPE_MSK);
 289                 break;
 290         }
 291
 292         /* translate the offset from words to byte */
 293         return (address & ADDRESS_MSK) + (offset << 1);
 294 }
 295
 296 static u16 iwl5000_eeprom_calib_version(struct iwl_priv *priv)
 297 {
 298         struct iwl_eeprom_calib_hdr {
 299                 u8 version;
 300                 u8 pa_type;
 301                 u16 voltage;
 302         } *hdr;
 303
 304         hdr = (struct iwl_eeprom_calib_hdr *)iwl_eeprom_query_addr(priv,
 305                                                         EEPROM_5000_CALIB_ALL);
 306         return hdr->version;
 307
 308 }
 309
 310 static void iwl5000_gain_computation(struct iwl_priv *priv,
 311                 u32 average_noise[NUM_RX_CHAINS],
 312                 u16 min_average_noise_antenna_i,
 313                 u32 min_average_noise)
 314 {
 315         int i;
 316         s32 delta_g;
 317         struct iwl_chain_noise_data *data = &priv->chain_noise_data;
 318
 319         /* Find Gain Code for the antennas B and C */
 320         for (i = 1; i < NUM_RX_CHAINS; i++) {
 321                 if ((data->disconn_array[i])) {
 322                         data->delta_gain_code[i] = 0;
 323                         continue;
 324                 }
 325                 delta_g = (1000 * ((s32)average_noise[0] -
 326                         (s32)average_noise[i])) / 1500;
 327                 /* bound gain by 2 bits value max, 3rd bit is sign */
 328                 data->delta_gain_code[i] =
 329                         min(abs(delta_g), CHAIN_NOISE_MAX_DELTA_GAIN_CODE);
 330
 331                 if (delta_g < 0)
 332                         /* set negative sign */
 333                         data->delta_gain_code[i] |= (1 << 2);
 334         }
 335
 336         IWL_DEBUG_CALIB("Delta gains: ANT_B = %d  ANT_C = %d\n",
 337                         data->delta_gain_code[1], data->delta_gain_code[2]);
 338
 339         if (!data->radio_write) {
 340                 struct iwl_calib_chain_noise_gain_cmd cmd;
 341                 memset(&cmd, 0, sizeof(cmd));
 342
 343                 cmd.op_code = IWL_PHY_CALIBRATE_CHAIN_NOISE_GAIN_CMD;
 344                 cmd.delta_gain_1 = data->delta_gain_code[1];
 345                 cmd.delta_gain_2 = data->delta_gain_code[2];
 346                 iwl_send_cmd_pdu_async(priv, REPLY_PHY_CALIBRATION_CMD,
 347                         sizeof(cmd), &cmd, NULL);
 348
 349                 data->radio_write = 1;
 350                 data->state = IWL_CHAIN_NOISE_CALIBRATED;
 351         }
 352
 353         data->chain_noise_a = 0;
 354         data->chain_noise_b = 0;
 355         data->chain_noise_c = 0;
 356         data->chain_signal_a = 0;
 357         data->chain_signal_b = 0;
 358         data->chain_signal_c = 0;
 359         data->beacon_count = 0;
 360 }
 361
 362 static void iwl5000_chain_noise_reset(struct iwl_priv *priv)
 363 {
 364         struct iwl_chain_noise_data *data = &priv->chain_noise_data;
 365
 366         if ((data->state == IWL_CHAIN_NOISE_ALIVE) && iwl_is_associated(priv)) {
 367                 struct iwl_calib_chain_noise_reset_cmd cmd;
 368
 369                 memset(&cmd, 0, sizeof(cmd));
 370                 cmd.op_code = IWL_PHY_CALIBRATE_CHAIN_NOISE_RESET_CMD;
 371                 if (iwl_send_cmd_pdu(priv, REPLY_PHY_CALIBRATION_CMD,
 372                         sizeof(cmd), &cmd))
 373                         IWL_ERROR("Could not send REPLY_PHY_CALIBRATION_CMD\n");
 374                 data->state = IWL_CHAIN_NOISE_ACCUMULATE;
 375                 IWL_DEBUG_CALIB("Run chain_noise_calibrate\n");
 376         }
 377 }
 378
 379 static void iwl5000_rts_tx_cmd_flag(struct ieee80211_tx_info *info,
 380                         __le32 *tx_flags)
 381 {
 382         if ((info->control.rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS) ||
 383             (info->control.rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT))
 384                 *tx_flags |= TX_CMD_FLG_RTS_CTS_MSK;
 385         else
 386                 *tx_flags &= ~TX_CMD_FLG_RTS_CTS_MSK;
 387 }
 388
 389 static struct iwl_sensitivity_ranges iwl5000_sensitivity = {
 390         .min_nrg_cck = 95,
 391         .max_nrg_cck = 0,
 392         .auto_corr_min_ofdm = 90,
 393         .auto_corr_min_ofdm_mrc = 170,
 394         .auto_corr_min_ofdm_x1 = 120,
 395         .auto_corr_min_ofdm_mrc_x1 = 240,
 396
 397         .auto_corr_max_ofdm = 120,
 398         .auto_corr_max_ofdm_mrc = 210,
 399         .auto_corr_max_ofdm_x1 = 155,
 400         .auto_corr_max_ofdm_mrc_x1 = 290,
 401
 402         .auto_corr_min_cck = 125,
 403         .auto_corr_max_cck = 200,
 404         .auto_corr_min_cck_mrc = 170,
 405         .auto_corr_max_cck_mrc = 400,
 406         .nrg_th_cck = 95,
 407         .nrg_th_ofdm = 95,
 408 };
 409
 410 static const u8 *iwl5000_eeprom_query_addr(const struct iwl_priv *priv,
 411                                            size_t offset)
 412 {
 413         u32 address = eeprom_indirect_address(priv, offset);
 414         BUG_ON(address >= priv->cfg->eeprom_size);
 415         return &priv->eeprom[address];
 416 }
 417
 418 /*
 419  *  Calibration
 420  */
 421 static int iwl5000_set_Xtal_calib(struct iwl_priv *priv)
 422 {
 423         u8 data[sizeof(struct iwl_calib_hdr) +
 424                 sizeof(struct iwl_cal_xtal_freq)];
 425         struct iwl_calib_cmd *cmd = (struct iwl_calib_cmd *)data;
 426         struct iwl_cal_xtal_freq *xtal = (struct iwl_cal_xtal_freq *)cmd->data;
 427         u16 *xtal_calib = (u16 *)iwl_eeprom_query_addr(priv, EEPROM_5000_XTAL);
 428
 429         cmd->hdr.op_code = IWL_PHY_CALIBRATE_CRYSTAL_FRQ_CMD;
 430         xtal->cap_pin1 = (u8)xtal_calib[0];
 431         xtal->cap_pin2 = (u8)xtal_calib[1];
 432         return iwl_calib_set(&priv->calib_results[IWL_CALIB_XTAL],
 433                              data, sizeof(data));
 434 }
 435
 436 static int iwl5000_send_calib_cfg(struct iwl_priv *priv)
 437 {
 438         struct iwl_calib_cfg_cmd calib_cfg_cmd;
 439         struct iwl_host_cmd cmd = {
 440                 .id = CALIBRATION_CFG_CMD,
 441                 .len = sizeof(struct iwl_calib_cfg_cmd),
 442                 .data = &calib_cfg_cmd,
 443         };
 444
 445         memset(&calib_cfg_cmd, 0, sizeof(calib_cfg_cmd));
 446         calib_cfg_cmd.ucd_calib_cfg.once.is_enable = IWL_CALIB_INIT_CFG_ALL;
 447         calib_cfg_cmd.ucd_calib_cfg.once.start = IWL_CALIB_INIT_CFG_ALL;
 448         calib_cfg_cmd.ucd_calib_cfg.once.send_res = IWL_CALIB_INIT_CFG_ALL;
 449         calib_cfg_cmd.ucd_calib_cfg.flags = IWL_CALIB_INIT_CFG_ALL;
 450
 451         return iwl_send_cmd(priv, &cmd);
 452 }
 453
 454 static void iwl5000_rx_calib_result(struct iwl_priv *priv,
 455                              struct iwl_rx_mem_buffer *rxb)
 456 {
 457         struct iwl_rx_packet *pkt = (void *)rxb->skb->data;
 458         struct iwl_calib_hdr *hdr = (struct iwl_calib_hdr *)pkt->u.raw;
 459         int len = le32_to_cpu(pkt->len) & FH_RSCSR_FRAME_SIZE_MSK;
 460         int index;
 461
 462         /* reduce the size of the length field itself */
 463         len -= 4;
 464
 465         /* Define the order in which the results will be sent to the runtime
 466          * uCode. iwl_send_calib_results sends them in a row according to their
 467          * index. We sort them here */
 468         switch (hdr->op_code) {
 469         case IWL_PHY_CALIBRATE_LO_CMD:
 470                 index = IWL_CALIB_LO;
 471                 break;
 472         case IWL_PHY_CALIBRATE_TX_IQ_CMD:
 473                 index = IWL_CALIB_TX_IQ;
 474                 break;
 475         case IWL_PHY_CALIBRATE_TX_IQ_PERD_CMD:
 476                 index = IWL_CALIB_TX_IQ_PERD;
 477                 break;
 478         case IWL_PHY_CALIBRATE_BASE_BAND_CMD:
 479                 index = IWL_CALIB_BASE_BAND;
 480                 break;
 481         default:
 482                 IWL_ERROR("Unknown calibration notification %d\n",
 483                           hdr->op_code);
 484                 return;
 485         }
 486         iwl_calib_set(&priv->calib_results[index], pkt->u.raw, len);
 487 }
 488
 489 static void iwl5000_rx_calib_complete(struct iwl_priv *priv,
 490                                struct iwl_rx_mem_buffer *rxb)
 491 {
 492         IWL_DEBUG_INFO("Init. calibration is completed, restarting fw.\n");
 493         queue_work(priv->workqueue, &priv->restart);
 494 }
 495
 496 /*
 497  * ucode
 498  */
 499 static int iwl5000_load_section(struct iwl_priv *priv,
 500                                 struct fw_desc *image,
 501                                 u32 dst_addr)
 502 {
 503         int ret = 0;
 504         unsigned long flags;
 505
 506         dma_addr_t phy_addr = image->p_addr;
 507         u32 byte_cnt = image->len;
 508
 509         spin_lock_irqsave(&priv->lock, flags);
 510         ret = iwl_grab_nic_access(priv);
 511         if (ret) {
 512                 spin_unlock_irqrestore(&priv->lock, flags);
 513                 return ret;
 514         }
 515
 516         iwl_write_direct32(priv,
 517                 FH_TCSR_CHNL_TX_CONFIG_REG(FH_SRVC_CHNL),
 518                 FH_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_PAUSE);
 519
 520         iwl_write_direct32(priv,
 521                 FH_SRVC_CHNL_SRAM_ADDR_REG(FH_SRVC_CHNL), dst_addr);
 522
 523         iwl_write_direct32(priv,
 524                 FH_TFDIB_CTRL0_REG(FH_SRVC_CHNL),
 525                 phy_addr & FH_MEM_TFDIB_DRAM_ADDR_LSB_MSK);
 526
 527         iwl_write_direct32(priv,
 528                 FH_TFDIB_CTRL1_REG(FH_SRVC_CHNL),
 529                 (iwl_get_dma_hi_addr(phy_addr)
 530                         << FH_MEM_TFDIB_REG1_ADDR_BITSHIFT) | byte_cnt);
 531
 532         iwl_write_direct32(priv,
 533                 FH_TCSR_CHNL_TX_BUF_STS_REG(FH_SRVC_CHNL),
 534                 1 << FH_TCSR_CHNL_TX_BUF_STS_REG_POS_TB_NUM |
 535                 1 << FH_TCSR_CHNL_TX_BUF_STS_REG_POS_TB_IDX |
 536                 FH_TCSR_CHNL_TX_BUF_STS_REG_VAL_TFDB_VALID);
 537
 538         iwl_write_direct32(priv,
 539                 FH_TCSR_CHNL_TX_CONFIG_REG(FH_SRVC_CHNL),
 540                 FH_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_ENABLE       |
 541                 FH_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_DISABLE    |
 542                 FH_TCSR_TX_CONFIG_REG_VAL_CIRQ_HOST_ENDTFD);
 543
 544         iwl_release_nic_access(priv);
 545         spin_unlock_irqrestore(&priv->lock, flags);
 546         return 0;
 547 }
 548
 549 static int iwl5000_load_given_ucode(struct iwl_priv *priv,
 550                 struct fw_desc *inst_image,
 551                 struct fw_desc *data_image)
 552 {
 553         int ret = 0;
 554
 555         ret = iwl5000_load_section(priv, inst_image, RTC_INST_LOWER_BOUND);
 556         if (ret)
 557                 return ret;
 558
 559         IWL_DEBUG_INFO("INST uCode section being loaded...\n");
 560         ret = wait_event_interruptible_timeout(priv->wait_command_queue,
 561                                         priv->ucode_write_complete, 5 * HZ);
 562         if (ret == -ERESTARTSYS) {
 563                 IWL_ERROR("Could not load the INST uCode section due "
 564                         "to interrupt\n");
 565                 return ret;
 566         }
 567         if (!ret) {
 568                 IWL_ERROR("Could not load the INST uCode section\n");
 569                 return -ETIMEDOUT;
 570         }
 571
 572         priv->ucode_write_complete = 0;
 573
 574         ret = iwl5000_load_section(
 575                 priv, data_image, RTC_DATA_LOWER_BOUND);
 576         if (ret)
 577                 return ret;
 578
 579         IWL_DEBUG_INFO("DATA uCode section being loaded...\n");
 580
 581         ret = wait_event_interruptible_timeout(priv->wait_command_queue,
 582                                 priv->ucode_write_complete, 5 * HZ);
 583         if (ret == -ERESTARTSYS) {
 584                 IWL_ERROR("Could not load the INST uCode section due "
 585                         "to interrupt\n");
 586                 return ret;
 587         } else if (!ret) {
 588                 IWL_ERROR("Could not load the DATA uCode section\n");
 589                 return -ETIMEDOUT;
 590         } else
 591                 ret = 0;
 592
 593         priv->ucode_write_complete = 0;
 594
 595         return ret;
 596 }
 597
 598 static int iwl5000_load_ucode(struct iwl_priv *priv)
 599 {
 600         int ret = 0;
 601
 602         /* check whether init ucode should be loaded, or rather runtime ucode */
 603         if (priv->ucode_init.len && (priv->ucode_type == UCODE_NONE)) {
 604                 IWL_DEBUG_INFO("Init ucode found. Loading init ucode...\n");
 605                 ret = iwl5000_load_given_ucode(priv,
 606                         &priv->ucode_init, &priv->ucode_init_data);
 607                 if (!ret) {
 608                         IWL_DEBUG_INFO("Init ucode load complete.\n");
 609                         priv->ucode_type = UCODE_INIT;
 610                 }
 611         } else {
 612                 IWL_DEBUG_INFO("Init ucode not found, or already loaded. "
 613                         "Loading runtime ucode...\n");
 614                 ret = iwl5000_load_given_ucode(priv,
 615                         &priv->ucode_code, &priv->ucode_data);
 616                 if (!ret) {
 617                         IWL_DEBUG_INFO("Runtime ucode load complete.\n");
 618                         priv->ucode_type = UCODE_RT;
 619                 }
 620         }
 621
 622         return ret;
 623 }
 624
 625 static void iwl5000_init_alive_start(struct iwl_priv *priv)
 626 {
 627         int ret = 0;
 628
 629         /* Check alive response for "valid" sign from uCode */
 630         if (priv->card_alive_init.is_valid != UCODE_VALID_OK) {
 631                 /* We had an error bringing up the hardware, so take it
 632                  * all the way back down so we can try again */
 633                 IWL_DEBUG_INFO("Initialize Alive failed.\n");
 634                 goto restart;
 635         }
 636
 637         /* initialize uCode was loaded... verify inst image.
 638          * This is a paranoid check, because we would not have gotten the
 639          * "initialize" alive if code weren't properly loaded.  */
 640         if (iwl_verify_ucode(priv)) {
 641                 /* Runtime instruction load was bad;
 642                  * take it all the way back down so we can try again */
 643                 IWL_DEBUG_INFO("Bad \"initialize\" uCode load.\n");
 644                 goto restart;
 645         }
 646
 647         iwl_clear_stations_table(priv);
 648         ret = priv->cfg->ops->lib->alive_notify(priv);
 649         if (ret) {
 650                 IWL_WARNING("Could not complete ALIVE transition: %d\n", ret);
 651                 goto restart;
 652         }
 653
 654         iwl5000_send_calib_cfg(priv);
 655         return;
 656
 657 restart:
 658         /* real restart (first load init_ucode) */
 659         queue_work(priv->workqueue, &priv->restart);
 660 }
 661
 662 static void iwl5000_set_wr_ptrs(struct iwl_priv *priv,
 663                                 int txq_id, u32 index)
 664 {
 665         iwl_write_direct32(priv, HBUS_TARG_WRPTR,
 666                         (index & 0xff) | (txq_id << 8));
 667         iwl_write_prph(priv, IWL50_SCD_QUEUE_RDPTR(txq_id), index);
 668 }
 669
 670 static void iwl5000_tx_queue_set_status(struct iwl_priv *priv,
 671                                         struct iwl_tx_queue *txq,
 672                                         int tx_fifo_id, int scd_retry)
 673 {
 674         int txq_id = txq->q.id;
 675         int active = test_bit(txq_id, &priv->txq_ctx_active_msk) ? 1 : 0;
 676
 677         iwl_write_prph(priv, IWL50_SCD_QUEUE_STATUS_BITS(txq_id),
 678                         (active << IWL50_SCD_QUEUE_STTS_REG_POS_ACTIVE) |
 679                         (tx_fifo_id << IWL50_SCD_QUEUE_STTS_REG_POS_TXF) |
 680                         (1 << IWL50_SCD_QUEUE_STTS_REG_POS_WSL) |
 681                         IWL50_SCD_QUEUE_STTS_REG_MSK);
 682
 683         txq->sched_retry = scd_retry;
 684
 685         IWL_DEBUG_INFO("%s %s Queue %d on AC %d\n",
 686                        active ? "Activate" : "Deactivate",
 687                        scd_retry ? "BA" : "AC", txq_id, tx_fifo_id);
 688 }
 689
 690 static int iwl5000_send_wimax_coex(struct iwl_priv *priv)
 691 {
 692         struct iwl_wimax_coex_cmd coex_cmd;
 693
 694         memset(&coex_cmd, 0, sizeof(coex_cmd));
 695
 696         return iwl_send_cmd_pdu(priv, COEX_PRIORITY_TABLE_CMD,
 697                                 sizeof(coex_cmd), &coex_cmd);
 698 }
 699
 700 static int iwl5000_alive_notify(struct iwl_priv *priv)
 701 {
 702         u32 a;
 703         int i = 0;
 704         unsigned long flags;
 705         int ret;
 706
 707         spin_lock_irqsave(&priv->lock, flags);
 708
 709         ret = iwl_grab_nic_access(priv);
 710         if (ret) {
 711                 spin_unlock_irqrestore(&priv->lock, flags);
 712                 return ret;
 713         }
 714
 715         priv->scd_base_addr = iwl_read_prph(priv, IWL50_SCD_SRAM_BASE_ADDR);
 716         a = priv->scd_base_addr + IWL50_SCD_CONTEXT_DATA_OFFSET;
 717         for (; a < priv->scd_base_addr + IWL50_SCD_TX_STTS_BITMAP_OFFSET;
 718                 a += 4)
 719                 iwl_write_targ_mem(priv, a, 0);
 720         for (; a < priv->scd_base_addr + IWL50_SCD_TRANSLATE_TBL_OFFSET;
 721                 a += 4)
 722                 iwl_write_targ_mem(priv, a, 0);
 723         for (; a < sizeof(u16) * priv->hw_params.max_txq_num; a += 4)
 724                 iwl_write_targ_mem(priv, a, 0);
 725
 726         iwl_write_prph(priv, IWL50_SCD_DRAM_BASE_ADDR,
 727                        priv->scd_bc_tbls.dma >> 10);
 728         iwl_write_prph(priv, IWL50_SCD_QUEUECHAIN_SEL,
 729                 IWL50_SCD_QUEUECHAIN_SEL_ALL(priv->hw_params.max_txq_num));
 730         iwl_write_prph(priv, IWL50_SCD_AGGR_SEL, 0);
 731
 732         /* initiate the queues */
 733         for (i = 0; i < priv->hw_params.max_txq_num; i++) {
 734                 iwl_write_prph(priv, IWL50_SCD_QUEUE_RDPTR(i), 0);
 735                 iwl_write_direct32(priv, HBUS_TARG_WRPTR, 0 | (i << 8));
 736                 iwl_write_targ_mem(priv, priv->scd_base_addr +
 737                                 IWL50_SCD_CONTEXT_QUEUE_OFFSET(i), 0);
 738                 iwl_write_targ_mem(priv, priv->scd_base_addr +
 739                                 IWL50_SCD_CONTEXT_QUEUE_OFFSET(i) +
 740                                 sizeof(u32),
 741                                 ((SCD_WIN_SIZE <<
 742                                 IWL50_SCD_QUEUE_CTX_REG2_WIN_SIZE_POS) &
 743                                 IWL50_SCD_QUEUE_CTX_REG2_WIN_SIZE_MSK) |
 744                                 ((SCD_FRAME_LIMIT <<
 745                                 IWL50_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_POS) &
 746                                 IWL50_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_MSK));
 747         }
 748
 749         iwl_write_prph(priv, IWL50_SCD_INTERRUPT_MASK,
 750                         IWL_MASK(0, priv->hw_params.max_txq_num));
 751
 752         /* Activate all Tx DMA/FIFO channels */
 753         priv->cfg->ops->lib->txq_set_sched(priv, IWL_MASK(0, 7));
 754
 755         iwl5000_set_wr_ptrs(priv, IWL_CMD_QUEUE_NUM, 0);
 756
 757         /* map qos queues to fifos one-to-one */
 758         for (i = 0; i < ARRAY_SIZE(iwl5000_default_queue_to_tx_fifo); i++) {
 759                 int ac = iwl5000_default_queue_to_tx_fifo[i];
 760                 iwl_txq_ctx_activate(priv, i);
 761                 iwl5000_tx_queue_set_status(priv, &priv->txq[i], ac, 0);
 762         }
 763         /* TODO - need to initialize those FIFOs inside the loop above,
 764          * not only mark them as active */
 765         iwl_txq_ctx_activate(priv, 4);
 766         iwl_txq_ctx_activate(priv, 7);
 767         iwl_txq_ctx_activate(priv, 8);
 768         iwl_txq_ctx_activate(priv, 9);
 769
 770         iwl_release_nic_access(priv);
 771         spin_unlock_irqrestore(&priv->lock, flags);
 772
 773
 774         iwl5000_send_wimax_coex(priv);
 775
 776         iwl5000_set_Xtal_calib(priv);
 777         iwl_send_calib_results(priv);
 778
 779         return 0;
 780 }
 781
 782 static int iwl5000_hw_set_hw_params(struct iwl_priv *priv)
 783 {
 784         if ((priv->cfg->mod_params->num_of_queues > IWL50_NUM_QUEUES) ||
 785             (priv->cfg->mod_params->num_of_queues < IWL_MIN_NUM_QUEUES)) {
 786                 IWL_ERROR("invalid queues_num, should be between %d and %d\n",
 787                           IWL_MIN_NUM_QUEUES, IWL50_NUM_QUEUES);
 788                 return -EINVAL;
 789         }
 790
 791         priv->hw_params.max_txq_num = priv->cfg->mod_params->num_of_queues;
 792         priv->hw_params.scd_bc_tbls_size =
 793                         IWL50_NUM_QUEUES * sizeof(struct iwl5000_scd_bc_tbl);
 794         priv->hw_params.max_stations = IWL5000_STATION_COUNT;
 795         priv->hw_params.bcast_sta_id = IWL5000_BROADCAST_ID;
 796         priv->hw_params.max_data_size = IWL50_RTC_DATA_SIZE;
 797         priv->hw_params.max_inst_size = IWL50_RTC_INST_SIZE;
 798         priv->hw_params.max_bsm_size = 0;
 799         priv->hw_params.fat_channel =  BIT(IEEE80211_BAND_2GHZ) |
 800                                         BIT(IEEE80211_BAND_5GHZ);
 801         priv->hw_params.sens = &iwl5000_sensitivity;
 802
 803         switch (priv->hw_rev & CSR_HW_REV_TYPE_MSK) {
 804         case CSR_HW_REV_TYPE_5100:
 805                 priv->hw_params.tx_chains_num = 1;
 806                 priv->hw_params.rx_chains_num = 2;
 807                 priv->hw_params.valid_tx_ant = ANT_B;
 808                 priv->hw_params.valid_rx_ant = ANT_AB;
 809                 break;
 810         case CSR_HW_REV_TYPE_5150:
 811                 priv->hw_params.tx_chains_num = 1;
 812                 priv->hw_params.rx_chains_num = 2;
 813                 priv->hw_params.valid_tx_ant = ANT_A;
 814                 priv->hw_params.valid_rx_ant = ANT_AB;
 815                 break;
 816         case CSR_HW_REV_TYPE_5300:
 817         case CSR_HW_REV_TYPE_5350:
 818                 priv->hw_params.tx_chains_num = 3;
 819                 priv->hw_params.rx_chains_num = 3;
 820                 priv->hw_params.valid_tx_ant = ANT_ABC;
 821                 priv->hw_params.valid_rx_ant = ANT_ABC;
 822                 break;
 823         }
 824
 825         switch (priv->hw_rev & CSR_HW_REV_TYPE_MSK) {
 826         case CSR_HW_REV_TYPE_5100:
 827         case CSR_HW_REV_TYPE_5300:
 828         case CSR_HW_REV_TYPE_5350:
 829                 /* 5X00 and 5350 wants in Celsius */
 830                 priv->hw_params.ct_kill_threshold = CT_KILL_THRESHOLD;
 831                 break;
 832         case CSR_HW_REV_TYPE_5150:
 833                 /* 5150 wants in Kelvin */
 834                 priv->hw_params.ct_kill_threshold =
 835                                 CELSIUS_TO_KELVIN(CT_KILL_THRESHOLD);
 836                 break;
 837         }
 838
 839         /* Set initial calibration set */
 840         switch (priv->hw_rev & CSR_HW_REV_TYPE_MSK) {
 841         case CSR_HW_REV_TYPE_5100:
 842         case CSR_HW_REV_TYPE_5300:
 843         case CSR_HW_REV_TYPE_5350:
 844                 priv->hw_params.calib_init_cfg =
 845                         BIT(IWL_CALIB_XTAL)             |
 846                         BIT(IWL_CALIB_LO)               |
 847                         BIT(IWL_CALIB_TX_IQ)            |
 848                         BIT(IWL_CALIB_TX_IQ_PERD)       |
 849                         BIT(IWL_CALIB_BASE_BAND);
 850                 break;
 851         case CSR_HW_REV_TYPE_5150:
 852                 priv->hw_params.calib_init_cfg = 0;
 853                 break;
 854         }
 855
 856
 857         return 0;
 858 }
 859
 860 /**
 861  * iwl5000_txq_update_byte_cnt_tbl - Set up entry in Tx byte-count array
 862  */
 863 static void iwl5000_txq_update_byte_cnt_tbl(struct iwl_priv *priv,
 864                                             struct iwl_tx_queue *txq,
 865                                             u16 byte_cnt)
 866 {
 867         struct iwl5000_scd_bc_tbl *scd_bc_tbl = priv->scd_bc_tbls.addr;
 868         int write_ptr = txq->q.write_ptr;
 869         int txq_id = txq->q.id;
 870         u8 sec_ctl = 0;
 871         u8 sta_id = 0;
 872         u16 len = byte_cnt + IWL_TX_CRC_SIZE + IWL_TX_DELIMITER_SIZE;
 873         __le16 bc_ent;
 874
 875         WARN_ON(len > 0xFFF || write_ptr >= TFD_QUEUE_SIZE_MAX);
 876
 877         if (txq_id != IWL_CMD_QUEUE_NUM) {
 878                 sta_id = txq->cmd[txq->q.write_ptr]->cmd.tx.sta_id;
 879                 sec_ctl = txq->cmd[txq->q.write_ptr]->cmd.tx.sec_ctl;
 880
 881                 switch (sec_ctl & TX_CMD_SEC_MSK) {
 882                 case TX_CMD_SEC_CCM:
 883                         len += CCMP_MIC_LEN;
 884                         break;
 885                 case TX_CMD_SEC_TKIP:
 886                         len += TKIP_ICV_LEN;
 887                         break;
 888                 case TX_CMD_SEC_WEP:
 889                         len += WEP_IV_LEN + WEP_ICV_LEN;
 890                         break;
 891                 }
 892         }
 893
 894         bc_ent = cpu_to_le16((len & 0xFFF) | (sta_id << 12));
 895
 896         scd_bc_tbl[txq_id].tfd_offset[write_ptr] = bc_ent;
 897
 898         if (txq->q.write_ptr < TFD_QUEUE_SIZE_BC_DUP)
 899                 scd_bc_tbl[txq_id].
 900                         tfd_offset[TFD_QUEUE_SIZE_MAX + write_ptr] = bc_ent;
 901 }
 902
 903 static void iwl5000_txq_inval_byte_cnt_tbl(struct iwl_priv *priv,
 904                                            struct iwl_tx_queue *txq)
 905 {
 906         struct iwl5000_scd_bc_tbl *scd_bc_tbl = priv->scd_bc_tbls.addr;
 907         int txq_id = txq->q.id;
 908         int read_ptr = txq->q.read_ptr;
 909         u8 sta_id = 0;
 910         __le16 bc_ent;
 911
 912         WARN_ON(read_ptr >= TFD_QUEUE_SIZE_MAX);
 913
 914         if (txq_id != IWL_CMD_QUEUE_NUM)
 915                 sta_id = txq->cmd[read_ptr]->cmd.tx.sta_id;
 916
 917         bc_ent =  cpu_to_le16(1 | (sta_id << 12));
 918         scd_bc_tbl[txq_id].tfd_offset[read_ptr] = bc_ent;
 919
 920         if (txq->q.write_ptr < TFD_QUEUE_SIZE_BC_DUP)
 921                 scd_bc_tbl[txq_id].
 922                         tfd_offset[TFD_QUEUE_SIZE_MAX + read_ptr] =  bc_ent;
 923 }
 924
 925 static int iwl5000_tx_queue_set_q2ratid(struct iwl_priv *priv, u16 ra_tid,
 926                                         u16 txq_id)
 927 {
 928         u32 tbl_dw_addr;
 929         u32 tbl_dw;
 930         u16 scd_q2ratid;
 931
 932         scd_q2ratid = ra_tid & IWL_SCD_QUEUE_RA_TID_MAP_RATID_MSK;
 933
 934         tbl_dw_addr = priv->scd_base_addr +
 935                         IWL50_SCD_TRANSLATE_TBL_OFFSET_QUEUE(txq_id);
 936
 937         tbl_dw = iwl_read_targ_mem(priv, tbl_dw_addr);
 938
 939         if (txq_id & 0x1)
 940                 tbl_dw = (scd_q2ratid << 16) | (tbl_dw & 0x0000FFFF);
 941         else
 942                 tbl_dw = scd_q2ratid | (tbl_dw & 0xFFFF0000);
 943
 944         iwl_write_targ_mem(priv, tbl_dw_addr, tbl_dw);
 945
 946         return 0;
 947 }
 948 static void iwl5000_tx_queue_stop_scheduler(struct iwl_priv *priv, u16 txq_id)
 949 {
 950         /* Simply stop the queue, but don't change any configuration;
 951          * the SCD_ACT_EN bit is the write-enable mask for the ACTIVE bit. */
 952         iwl_write_prph(priv,
 953                 IWL50_SCD_QUEUE_STATUS_BITS(txq_id),
 954                 (0 << IWL50_SCD_QUEUE_STTS_REG_POS_ACTIVE)|
 955                 (1 << IWL50_SCD_QUEUE_STTS_REG_POS_SCD_ACT_EN));
 956 }
 957
 958 static int iwl5000_txq_agg_enable(struct iwl_priv *priv, int txq_id,
 959                                   int tx_fifo, int sta_id, int tid, u16 ssn_idx)
 960 {
 961         unsigned long flags;
 962         int ret;
 963         u16 ra_tid;
 964
 965         if ((IWL50_FIRST_AMPDU_QUEUE > txq_id) ||
 966             (IWL50_FIRST_AMPDU_QUEUE + IWL50_NUM_AMPDU_QUEUES <= txq_id)) {
 967                 IWL_WARNING("queue number out of range: %d, must be %d to %d\n",
 968                         txq_id, IWL50_FIRST_AMPDU_QUEUE,
 969                         IWL50_FIRST_AMPDU_QUEUE + IWL50_NUM_AMPDU_QUEUES - 1);
 970                 return -EINVAL;
 971         }
 972
 973         ra_tid = BUILD_RAxTID(sta_id, tid);
 974
 975         /* Modify device's station table to Tx this TID */
 976         iwl_sta_tx_modify_enable_tid(priv, sta_id, tid);
 977
 978         spin_lock_irqsave(&priv->lock, flags);
 979         ret = iwl_grab_nic_access(priv);
 980         if (ret) {
 981                 spin_unlock_irqrestore(&priv->lock, flags);
 982                 return ret;
 983         }
 984
 985         /* Stop this Tx queue before configuring it */
 986         iwl5000_tx_queue_stop_scheduler(priv, txq_id);
 987
 988         /* Map receiver-address / traffic-ID to this queue */
 989         iwl5000_tx_queue_set_q2ratid(priv, ra_tid, txq_id);
 990
 991         /* Set this queue as a chain-building queue */
 992         iwl_set_bits_prph(priv, IWL50_SCD_QUEUECHAIN_SEL, (1<<txq_id));
 993
 994         /* enable aggregations for the queue */
 995         iwl_set_bits_prph(priv, IWL50_SCD_AGGR_SEL, (1<<txq_id));
 996
 997         /* Place first TFD at index corresponding to start sequence number.
 998          * Assumes that ssn_idx is valid (!= 0xFFF) */
 999         priv->txq[txq_id].q.read_ptr = (ssn_idx & 0xff);
1000         priv->txq[txq_id].q.write_ptr = (ssn_idx & 0xff);
1001         iwl5000_set_wr_ptrs(priv, txq_id, ssn_idx);
1002
1003         /* Set up Tx window size and frame limit for this queue */
1004         iwl_write_targ_mem(priv, priv->scd_base_addr +
1005                         IWL50_SCD_CONTEXT_QUEUE_OFFSET(txq_id) +
1006                         sizeof(u32),
1007                         ((SCD_WIN_SIZE <<
1008                         IWL50_SCD_QUEUE_CTX_REG2_WIN_SIZE_POS) &
1009                         IWL50_SCD_QUEUE_CTX_REG2_WIN_SIZE_MSK) |
1010                         ((SCD_FRAME_LIMIT <<
1011                         IWL50_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_POS) &
1012                         IWL50_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_MSK));
1013
1014         iwl_set_bits_prph(priv, IWL50_SCD_INTERRUPT_MASK, (1 << txq_id));
1015
1016         /* Set up Status area in SRAM, map to Tx DMA/FIFO, activate the queue */
1017         iwl5000_tx_queue_set_status(priv, &priv->txq[txq_id], tx_fifo, 1);
1018
1019         iwl_release_nic_access(priv);
1020         spin_unlock_irqrestore(&priv->lock, flags);
1021
1022         return 0;
1023 }
1024
1025 static int iwl5000_txq_agg_disable(struct iwl_priv *priv, u16 txq_id,
1026                                    u16 ssn_idx, u8 tx_fifo)
1027 {
1028         int ret;
1029
1030         if ((IWL50_FIRST_AMPDU_QUEUE > txq_id) ||
1031             (IWL50_FIRST_AMPDU_QUEUE + IWL50_NUM_AMPDU_QUEUES <= txq_id)) {
1032                 IWL_WARNING("queue number out of range: %d, must be %d to %d\n",
1033                         txq_id, IWL50_FIRST_AMPDU_QUEUE,
1034                         IWL50_FIRST_AMPDU_QUEUE + IWL50_NUM_AMPDU_QUEUES - 1);
1035                 return -EINVAL;
1036         }
1037
1038         ret = iwl_grab_nic_access(priv);
1039         if (ret)
1040                 return ret;
1041
1042         iwl5000_tx_queue_stop_scheduler(priv, txq_id);
1043
1044         iwl_clear_bits_prph(priv, IWL50_SCD_AGGR_SEL, (1 << txq_id));
1045
1046         priv->txq[txq_id].q.read_ptr = (ssn_idx & 0xff);
1047         priv->txq[txq_id].q.write_ptr = (ssn_idx & 0xff);
1048         /* supposes that ssn_idx is valid (!= 0xFFF) */
1049         iwl5000_set_wr_ptrs(priv, txq_id, ssn_idx);
1050
1051         iwl_clear_bits_prph(priv, IWL50_SCD_INTERRUPT_MASK, (1 << txq_id));
1052         iwl_txq_ctx_deactivate(priv, txq_id);
1053         iwl5000_tx_queue_set_status(priv, &priv->txq[txq_id], tx_fifo, 0);
1054
1055         iwl_release_nic_access(priv);
1056
1057         return 0;
1058 }
1059
1060 static u16 iwl5000_build_addsta_hcmd(const struct iwl_addsta_cmd *cmd, u8 *data)
1061 {
1062         u16 size = (u16)sizeof(struct iwl_addsta_cmd);
1063         memcpy(data, cmd, size);
1064         return size;
1065 }
1066
1067
1068 /*
1069  * Activate/Deactivate Tx DMA/FIFO channels according tx fifos mask
1070  * must be called under priv->lock and mac access
1071  */
1072 static void iwl5000_txq_set_sched(struct iwl_priv *priv, u32 mask)
1073 {
1074         iwl_write_prph(priv, IWL50_SCD_TXFACT, mask);
1075 }
1076
1077
1078 static inline u32 iwl5000_get_scd_ssn(struct iwl5000_tx_resp *tx_resp)
1079 {
1080         return le32_to_cpup((__le32 *)&tx_resp->status +
1081                             tx_resp->frame_count) & MAX_SN;
1082 }
1083
1084 static int iwl5000_tx_status_reply_tx(struct iwl_priv *priv,
1085                                       struct iwl_ht_agg *agg,
1086                                       struct iwl5000_tx_resp *tx_resp,
1087                                       int txq_id, u16 start_idx)
1088 {
1089         u16 status;
1090         struct agg_tx_status *frame_status = &tx_resp->status;
1091         struct ieee80211_tx_info *info = NULL;
1092         struct ieee80211_hdr *hdr = NULL;
1093         u32 rate_n_flags = le32_to_cpu(tx_resp->rate_n_flags);
1094         int i, sh, idx;
1095         u16 seq;
1096
1097         if (agg->wait_for_ba)
1098                 IWL_DEBUG_TX_REPLY("got tx response w/o block-ack\n");
1099
1100         agg->frame_count = tx_resp->frame_count;
1101         agg->start_idx = start_idx;
1102         agg->rate_n_flags = rate_n_flags;
1103         agg->bitmap = 0;
1104
1105         /* # frames attempted by Tx command */
1106         if (agg->frame_count == 1) {
1107                 /* Only one frame was attempted; no block-ack will arrive */
1108                 status = le16_to_cpu(frame_status[0].status);
1109                 idx = start_idx;
1110
1111                 /* FIXME: code repetition */
1112                 IWL_DEBUG_TX_REPLY("FrameCnt = %d, StartIdx=%d idx=%d\n",
1113                                    agg->frame_count, agg->start_idx, idx);
1114
1115                 info = IEEE80211_SKB_CB(priv->txq[txq_id].txb[idx].skb[0]);
1116                 info->status.rates[0].count = tx_resp->failure_frame + 1;
1117                 info->flags &= ~IEEE80211_TX_CTL_AMPDU;
1118                 info->flags |= iwl_is_tx_success(status) ?
1119                                         IEEE80211_TX_STAT_ACK : 0;
1120                 iwl_hwrate_to_tx_control(priv, rate_n_flags, info);
1121
1122                 /* FIXME: code repetition end */
1123
1124                 IWL_DEBUG_TX_REPLY("1 Frame 0x%x failure :%d\n",
1125                                     status & 0xff, tx_resp->failure_frame);
1126                 IWL_DEBUG_TX_REPLY("Rate Info rate_n_flags=%x\n", rate_n_flags);
1127
1128                 agg->wait_for_ba = 0;
1129         } else {
1130                 /* Two or more frames were attempted; expect block-ack */
1131                 u64 bitmap = 0;
1132                 int start = agg->start_idx;
1133
1134                 /* Construct bit-map of pending frames within Tx window */
1135                 for (i = 0; i < agg->frame_count; i++) {
1136                         u16 sc;
1137                         status = le16_to_cpu(frame_status[i].status);
1138                         seq  = le16_to_cpu(frame_status[i].sequence);
1139                         idx = SEQ_TO_INDEX(seq);
1140                         txq_id = SEQ_TO_QUEUE(seq);
1141
1142                         if (status & (AGG_TX_STATE_FEW_BYTES_MSK |
1143                                       AGG_TX_STATE_ABORT_MSK))
1144                                 continue;
1145
1146                         IWL_DEBUG_TX_REPLY("FrameCnt = %d, txq_id=%d idx=%d\n",
1147                                            agg->frame_count, txq_id, idx);
1148
1149                         hdr = iwl_tx_queue_get_hdr(priv, txq_id, idx);
1150
1151                         sc = le16_to_cpu(hdr->seq_ctrl);
1152                         if (idx != (SEQ_TO_SN(sc) & 0xff)) {
1153                                 IWL_ERROR("BUG_ON idx doesn't match seq control"
1154                                           " idx=%d, seq_idx=%d, seq=%d\n",
1155                                           idx, SEQ_TO_SN(sc),
1156                                           hdr->seq_ctrl);
1157                                 return -1;
1158                         }
1159
1160                         IWL_DEBUG_TX_REPLY("AGG Frame i=%d idx %d seq=%d\n",
1161                                            i, idx, SEQ_TO_SN(sc));
1162
1163                         sh = idx - start;
1164                         if (sh > 64) {
1165                                 sh = (start - idx) + 0xff;
1166                                 bitmap = bitmap << sh;
1167                                 sh = 0;
1168                                 start = idx;
1169                         } else if (sh < -64)
1170                                 sh  = 0xff - (start - idx);
1171                         else if (sh < 0) {
1172                                 sh = start - idx;
1173                                 start = idx;
1174                                 bitmap = bitmap << sh;
1175                                 sh = 0;
1176                         }
1177                         bitmap |= 1ULL << sh;
1178                         IWL_DEBUG_TX_REPLY("start=%d bitmap=0x%llx\n",
1179                                            start, (unsigned long long)bitmap);
1180                 }
1181
1182                 agg->bitmap = bitmap;
1183                 agg->start_idx = start;
1184                 IWL_DEBUG_TX_REPLY("Frames %d start_idx=%d bitmap=0x%llx\n",
1185                                    agg->frame_count, agg->start_idx,
1186                                    (unsigned long long)agg->bitmap);
1187
1188                 if (bitmap)
1189                         agg->wait_for_ba = 1;
1190         }
1191         return 0;
1192 }
1193
1194 static void iwl5000_rx_reply_tx(struct iwl_priv *priv,
1195                                 struct iwl_rx_mem_buffer *rxb)
1196 {
1197         struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data;
1198         u16 sequence = le16_to_cpu(pkt->hdr.sequence);
1199         int txq_id = SEQ_TO_QUEUE(sequence);
1200         int index = SEQ_TO_INDEX(sequence);
1201         struct iwl_tx_queue *txq = &priv->txq[txq_id];
1202         struct ieee80211_tx_info *info;
1203         struct iwl5000_tx_resp *tx_resp = (void *)&pkt->u.raw[0];
1204         u32  status = le16_to_cpu(tx_resp->status.status);
1205         int tid;
1206         int sta_id;
1207         int freed;
1208
1209         if ((index >= txq->q.n_bd) || (iwl_queue_used(&txq->q, index) == 0)) {
1210                 IWL_ERROR("Read index for DMA queue txq_id (%d) index %d "
1211                           "is out of range [0-%d] %d %d\n", txq_id,
1212                           index, txq->q.n_bd, txq->q.write_ptr,
1213                           txq->q.read_ptr);
1214                 return;
1215         }
1216
1217         info = IEEE80211_SKB_CB(txq->txb[txq->q.read_ptr].skb[0]);
1218         memset(&info->status, 0, sizeof(info->status));
1219
1220         tid = (tx_resp->ra_tid & IWL50_TX_RES_TID_MSK) >> IWL50_TX_RES_TID_POS;
1221         sta_id = (tx_resp->ra_tid & IWL50_TX_RES_RA_MSK) >> IWL50_TX_RES_RA_POS;
1222
1223         if (txq->sched_retry) {
1224                 const u32 scd_ssn = iwl5000_get_scd_ssn(tx_resp);
1225                 struct iwl_ht_agg *agg = NULL;
1226
1227                 agg = &priv->stations[sta_id].tid[tid].agg;
1228
1229                 iwl5000_tx_status_reply_tx(priv, agg, tx_resp, txq_id, index);
1230
1231                 /* check if BAR is needed */
1232                 if ((tx_resp->frame_count == 1) && !iwl_is_tx_success(status))
1233                         info->flags |= IEEE80211_TX_STAT_AMPDU_NO_BACK;
1234
1235                 if (txq->q.read_ptr != (scd_ssn & 0xff)) {
1236                         index = iwl_queue_dec_wrap(scd_ssn & 0xff, txq->q.n_bd);
1237                         IWL_DEBUG_TX_REPLY("Retry scheduler reclaim "
1238                                         "scd_ssn=%d idx=%d txq=%d swq=%d\n",
1239                                         scd_ssn , index, txq_id, txq->swq_id);
1240
1241                         freed = iwl_tx_queue_reclaim(priv, txq_id, index);
1242                         priv->stations[sta_id].tid[tid].tfds_in_queue -= freed;
1243
1244                         if (priv->mac80211_registered &&
1245                             (iwl_queue_space(&txq->q) > txq->q.low_mark) &&
1246                             (agg->state != IWL_EMPTYING_HW_QUEUE_DELBA)) {
1247                                 if (agg->state == IWL_AGG_OFF)
1248                                         ieee80211_wake_queue(priv->hw, txq_id);
1249                                 else
1250                                         ieee80211_wake_queue(priv->hw,
1251                                                              txq->swq_id);
1252                         }
1253                 }
1254         } else {
1255                 BUG_ON(txq_id != txq->swq_id);
1256
1257                 info->status.rates[0].count = tx_resp->failure_frame + 1;
1258                 info->flags |= iwl_is_tx_success(status) ?
1259                                         IEEE80211_TX_STAT_ACK : 0;
1260                 iwl_hwrate_to_tx_control(priv,
1261                                         le32_to_cpu(tx_resp->rate_n_flags),
1262                                         info);
1263
1264                 IWL_DEBUG_TX_REPLY("TXQ %d status %s (0x%08x) rate_n_flags "
1265                                    "0x%x retries %d\n",
1266                                    txq_id,
1267                                    iwl_get_tx_fail_reason(status), status,
1268                                    le32_to_cpu(tx_resp->rate_n_flags),
1269                                    tx_resp->failure_frame);
1270
1271                 freed = iwl_tx_queue_reclaim(priv, txq_id, index);
1272                 if (ieee80211_is_data_qos(tx_resp->frame_ctrl))
1273                         priv->stations[sta_id].tid[tid].tfds_in_queue -= freed;
1274
1275                 if (priv->mac80211_registered &&
1276                     (iwl_queue_space(&txq->q) > txq->q.low_mark))
1277                         ieee80211_wake_queue(priv->hw, txq_id);
1278         }
1279
1280         if (ieee80211_is_data_qos(tx_resp->frame_ctrl))
1281                 iwl_txq_check_empty(priv, sta_id, tid, txq_id);
1282
1283         if (iwl_check_bits(status, TX_ABORT_REQUIRED_MSK))
1284                 IWL_ERROR("TODO:  Implement Tx ABORT REQUIRED!!!\n");
1285 }
1286
1287 /* Currently 5000 is the superset of everything */
1288 static u16 iwl5000_get_hcmd_size(u8 cmd_id, u16 len)
1289 {
1290         return len;
1291 }
1292
1293 static void iwl5000_setup_deferred_work(struct iwl_priv *priv)
1294 {
1295         /* in 5000 the tx power calibration is done in uCode */
1296         priv->disable_tx_power_cal = 1;
1297 }
1298
1299 static void iwl5000_rx_handler_setup(struct iwl_priv *priv)
1300 {
1301         /* init calibration handlers */
1302         priv->rx_handlers[CALIBRATION_RES_NOTIFICATION] =
1303                                         iwl5000_rx_calib_result;
1304         priv->rx_handlers[CALIBRATION_COMPLETE_NOTIFICATION] =
1305                                         iwl5000_rx_calib_complete;
1306         priv->rx_handlers[REPLY_TX] = iwl5000_rx_reply_tx;
1307 }
1308
1309
1310 static int iwl5000_hw_valid_rtc_data_addr(u32 addr)
1311 {
1312         return (addr >= RTC_DATA_LOWER_BOUND) &&
1313                 (addr < IWL50_RTC_DATA_UPPER_BOUND);
1314 }
1315
1316 static int iwl5000_send_rxon_assoc(struct iwl_priv *priv)
1317 {
1318         int ret = 0;
1319         struct iwl5000_rxon_assoc_cmd rxon_assoc;
1320         const struct iwl_rxon_cmd *rxon1 = &priv->staging_rxon;
1321         const struct iwl_rxon_cmd *rxon2 = &priv->active_rxon;
1322
1323         if ((rxon1->flags == rxon2->flags) &&
1324             (rxon1->filter_flags == rxon2->filter_flags) &&
1325             (rxon1->cck_basic_rates == rxon2->cck_basic_rates) &&
1326             (rxon1->ofdm_ht_single_stream_basic_rates ==
1327              rxon2->ofdm_ht_single_stream_basic_rates) &&
1328             (rxon1->ofdm_ht_dual_stream_basic_rates ==
1329              rxon2->ofdm_ht_dual_stream_basic_rates) &&
1330             (rxon1->ofdm_ht_triple_stream_basic_rates ==
1331              rxon2->ofdm_ht_triple_stream_basic_rates) &&
1332             (rxon1->acquisition_data == rxon2->acquisition_data) &&
1333             (rxon1->rx_chain == rxon2->rx_chain) &&
1334             (rxon1->ofdm_basic_rates == rxon2->ofdm_basic_rates)) {
1335                 IWL_DEBUG_INFO("Using current RXON_ASSOC.  Not resending.\n");
1336                 return 0;
1337         }
1338
1339         rxon_assoc.flags = priv->staging_rxon.flags;
1340         rxon_assoc.filter_flags = priv->staging_rxon.filter_flags;
1341         rxon_assoc.ofdm_basic_rates = priv->staging_rxon.ofdm_basic_rates;
1342         rxon_assoc.cck_basic_rates = priv->staging_rxon.cck_basic_rates;
1343         rxon_assoc.reserved1 = 0;
1344         rxon_assoc.reserved2 = 0;
1345         rxon_assoc.reserved3 = 0;
1346         rxon_assoc.ofdm_ht_single_stream_basic_rates =
1347             priv->staging_rxon.ofdm_ht_single_stream_basic_rates;
1348         rxon_assoc.ofdm_ht_dual_stream_basic_rates =
1349             priv->staging_rxon.ofdm_ht_dual_stream_basic_rates;
1350         rxon_assoc.rx_chain_select_flags = priv->staging_rxon.rx_chain;
1351         rxon_assoc.ofdm_ht_triple_stream_basic_rates =
1352                  priv->staging_rxon.ofdm_ht_triple_stream_basic_rates;
1353         rxon_assoc.acquisition_data = priv->staging_rxon.acquisition_data;
1354
1355         ret = iwl_send_cmd_pdu_async(priv, REPLY_RXON_ASSOC,
1356                                      sizeof(rxon_assoc), &rxon_assoc, NULL);
1357         if (ret)
1358                 return ret;
1359
1360         return ret;
1361 }
1362 static int  iwl5000_send_tx_power(struct iwl_priv *priv)
1363 {
1364         struct iwl5000_tx_power_dbm_cmd tx_power_cmd;
1365
1366         /* half dBm need to multiply */
1367         tx_power_cmd.global_lmt = (s8)(2 * priv->tx_power_user_lmt);
1368         tx_power_cmd.flags = IWL50_TX_POWER_NO_CLOSED;
1369         tx_power_cmd.srv_chan_lmt = IWL50_TX_POWER_AUTO;
1370         return  iwl_send_cmd_pdu_async(priv, REPLY_TX_POWER_DBM_CMD,
1371                                        sizeof(tx_power_cmd), &tx_power_cmd,
1372                                        NULL);
1373 }
1374
1375 static void iwl5000_temperature(struct iwl_priv *priv)
1376 {
1377         /* store temperature from statistics (in Celsius) */
1378         priv->temperature = le32_to_cpu(priv->statistics.general.temperature);
1379 }
1380
1381 /* Calc max signal level (dBm) among 3 possible receivers */
1382 static int iwl5000_calc_rssi(struct iwl_priv *priv,
1383                              struct iwl_rx_phy_res *rx_resp)
1384 {
1385         /* data from PHY/DSP regarding signal strength, etc.,
1386          *   contents are always there, not configurable by host
1387          */
1388         struct iwl5000_non_cfg_phy *ncphy =
1389                 (struct iwl5000_non_cfg_phy *)rx_resp->non_cfg_phy_buf;
1390         u32 val, rssi_a, rssi_b, rssi_c, max_rssi;
1391         u8 agc;
1392
1393         val  = le32_to_cpu(ncphy->non_cfg_phy[IWL50_RX_RES_AGC_IDX]);
1394         agc = (val & IWL50_OFDM_AGC_MSK) >> IWL50_OFDM_AGC_BIT_POS;
1395
1396         /* Find max rssi among 3 possible receivers.
1397          * These values are measured by the digital signal processor (DSP).
1398          * They should stay fairly constant even as the signal strength varies,
1399          *   if the radio's automatic gain control (AGC) is working right.
1400          * AGC value (see below) will provide the "interesting" info.
1401          */
1402         val = le32_to_cpu(ncphy->non_cfg_phy[IWL50_RX_RES_RSSI_AB_IDX]);
1403         rssi_a = (val & IWL50_OFDM_RSSI_A_MSK) >> IWL50_OFDM_RSSI_A_BIT_POS;
1404         rssi_b = (val & IWL50_OFDM_RSSI_B_MSK) >> IWL50_OFDM_RSSI_B_BIT_POS;
1405         val = le32_to_cpu(ncphy->non_cfg_phy[IWL50_RX_RES_RSSI_C_IDX]);
1406         rssi_c = (val & IWL50_OFDM_RSSI_C_MSK) >> IWL50_OFDM_RSSI_C_BIT_POS;
1407
1408         max_rssi = max_t(u32, rssi_a, rssi_b);
1409         max_rssi = max_t(u32, max_rssi, rssi_c);
1410
1411         IWL_DEBUG_STATS("Rssi In A %d B %d C %d Max %d AGC dB %d\n",
1412                 rssi_a, rssi_b, rssi_c, max_rssi, agc);
1413
1414         /* dBm = max_rssi dB - agc dB - constant.
1415          * Higher AGC (higher radio gain) means lower signal. */
1416         return max_rssi - agc - IWL_RSSI_OFFSET;
1417 }
1418
1419 static struct iwl_hcmd_ops iwl5000_hcmd = {
1420         .rxon_assoc = iwl5000_send_rxon_assoc,
1421 };
1422
1423 static struct iwl_hcmd_utils_ops iwl5000_hcmd_utils = {
1424         .get_hcmd_size = iwl5000_get_hcmd_size,
1425         .build_addsta_hcmd = iwl5000_build_addsta_hcmd,
1426         .gain_computation = iwl5000_gain_computation,
1427         .chain_noise_reset = iwl5000_chain_noise_reset,
1428         .rts_tx_cmd_flag = iwl5000_rts_tx_cmd_flag,
1429         .calc_rssi = iwl5000_calc_rssi,
1430 };
1431
1432 static struct iwl_lib_ops iwl5000_lib = {
1433         .set_hw_params = iwl5000_hw_set_hw_params,
1434         .txq_update_byte_cnt_tbl = iwl5000_txq_update_byte_cnt_tbl,
1435         .txq_inval_byte_cnt_tbl = iwl5000_txq_inval_byte_cnt_tbl,
1436         .txq_set_sched = iwl5000_txq_set_sched,
1437         .txq_agg_enable = iwl5000_txq_agg_enable,
1438         .txq_agg_disable = iwl5000_txq_agg_disable,
1439         .rx_handler_setup = iwl5000_rx_handler_setup,
1440         .setup_deferred_work = iwl5000_setup_deferred_work,
1441         .is_valid_rtc_data_addr = iwl5000_hw_valid_rtc_data_addr,
1442         .load_ucode = iwl5000_load_ucode,
1443         .init_alive_start = iwl5000_init_alive_start,
1444         .alive_notify = iwl5000_alive_notify,
1445         .send_tx_power = iwl5000_send_tx_power,
1446         .temperature = iwl5000_temperature,
1447         .update_chain_flags = iwl_update_chain_flags,
1448         .apm_ops = {
1449                 .init = iwl5000_apm_init,
1450                 .reset = iwl5000_apm_reset,
1451                 .stop = iwl5000_apm_stop,
1452                 .config = iwl5000_nic_config,
1453                 .set_pwr_src = iwl_set_pwr_src,
1454         },
1455         .eeprom_ops = {
1456                 .regulatory_bands = {
1457                         EEPROM_5000_REG_BAND_1_CHANNELS,
1458                         EEPROM_5000_REG_BAND_2_CHANNELS,
1459                         EEPROM_5000_REG_BAND_3_CHANNELS,
1460                         EEPROM_5000_REG_BAND_4_CHANNELS,
1461                         EEPROM_5000_REG_BAND_5_CHANNELS,
1462                         EEPROM_5000_REG_BAND_24_FAT_CHANNELS,
1463                         EEPROM_5000_REG_BAND_52_FAT_CHANNELS
1464                 },
1465                 .verify_signature  = iwlcore_eeprom_verify_signature,
1466                 .acquire_semaphore = iwlcore_eeprom_acquire_semaphore,
1467                 .release_semaphore = iwlcore_eeprom_release_semaphore,
1468                 .calib_version  = iwl5000_eeprom_calib_version,
1469                 .query_addr = iwl5000_eeprom_query_addr,
1470         },
1471 };
1472
1473 static struct iwl_ops iwl5000_ops = {
1474         .lib = &iwl5000_lib,
1475         .hcmd = &iwl5000_hcmd,
1476         .utils = &iwl5000_hcmd_utils,
1477 };
1478
1479 static struct iwl_mod_params iwl50_mod_params = {
1480         .num_of_queues = IWL50_NUM_QUEUES,
1481         .num_of_ampdu_queues = IWL50_NUM_AMPDU_QUEUES,
1482         .enable_qos = 1,
1483         .amsdu_size_8K = 1,
1484         .restart_fw = 1,
1485         /* the rest are 0 by default */
1486 };
1487
1488
1489 struct iwl_cfg iwl5300_agn_cfg = {
1490         .name = "5300AGN",
1491         .fw_name = IWL5000_MODULE_FIRMWARE,
1492         .sku = IWL_SKU_A|IWL_SKU_G|IWL_SKU_N,
1493         .ops = &iwl5000_ops,
1494         .eeprom_size = IWL_5000_EEPROM_IMG_SIZE,
1495         .eeprom_ver = EEPROM_5000_EEPROM_VERSION,
1496         .eeprom_calib_ver = EEPROM_5000_TX_POWER_VERSION,
1497         .mod_params = &iwl50_mod_params,
1498 };
1499
1500 struct iwl_cfg iwl5100_bg_cfg = {
1501         .name = "5100BG",
1502         .fw_name = IWL5000_MODULE_FIRMWARE,
1503         .sku = IWL_SKU_G,
1504         .ops = &iwl5000_ops,
1505         .eeprom_size = IWL_5000_EEPROM_IMG_SIZE,
1506         .eeprom_ver = EEPROM_5000_EEPROM_VERSION,
1507         .eeprom_calib_ver = EEPROM_5000_TX_POWER_VERSION,
1508         .mod_params = &iwl50_mod_params,
1509 };
1510
1511 struct iwl_cfg iwl5100_abg_cfg = {
1512         .name = "5100ABG",
1513         .fw_name = IWL5000_MODULE_FIRMWARE,
1514         .sku = IWL_SKU_A|IWL_SKU_G,
1515         .ops = &iwl5000_ops,
1516         .eeprom_size = IWL_5000_EEPROM_IMG_SIZE,
1517         .eeprom_ver = EEPROM_5000_EEPROM_VERSION,
1518         .eeprom_calib_ver = EEPROM_5000_TX_POWER_VERSION,
1519         .mod_params = &iwl50_mod_params,
1520 };
1521
1522 struct iwl_cfg iwl5100_agn_cfg = {
1523         .name = "5100AGN",
1524         .fw_name = IWL5000_MODULE_FIRMWARE,
1525         .sku = IWL_SKU_A|IWL_SKU_G|IWL_SKU_N,
1526         .ops = &iwl5000_ops,
1527         .eeprom_size = IWL_5000_EEPROM_IMG_SIZE,
1528         .eeprom_ver = EEPROM_5000_EEPROM_VERSION,
1529         .eeprom_calib_ver = EEPROM_5000_TX_POWER_VERSION,
1530         .mod_params = &iwl50_mod_params,
1531 };
1532
1533 struct iwl_cfg iwl5350_agn_cfg = {
1534         .name = "5350AGN",
1535         .fw_name = IWL5000_MODULE_FIRMWARE,
1536         .sku = IWL_SKU_A|IWL_SKU_G|IWL_SKU_N,
1537         .ops = &iwl5000_ops,
1538         .eeprom_size = IWL_5000_EEPROM_IMG_SIZE,
1539         .eeprom_ver = EEPROM_5050_EEPROM_VERSION,
1540         .eeprom_calib_ver = EEPROM_5050_TX_POWER_VERSION,
1541         .mod_params = &iwl50_mod_params,
1542 };
1543
1544 MODULE_FIRMWARE(IWL5000_MODULE_FIRMWARE);
1545
1546 module_param_named(disable50, iwl50_mod_params.disable, int, 0444);
1547 MODULE_PARM_DESC(disable50,
1548                   "manually disable the 50XX radio (default 0 [radio on])");
1549 module_param_named(swcrypto50, iwl50_mod_params.sw_crypto, bool, 0444);
1550 MODULE_PARM_DESC(swcrypto50,
1551                   "using software crypto engine (default 0 [hardware])\n");
1552 module_param_named(debug50, iwl50_mod_params.debug, int, 0444);
1553 MODULE_PARM_DESC(debug50, "50XX debug output mask");
1554 module_param_named(queues_num50, iwl50_mod_params.num_of_queues, int, 0444);
1555 MODULE_PARM_DESC(queues_num50, "number of hw queues in 50xx series");
1556 module_param_named(qos_enable50, iwl50_mod_params.enable_qos, int, 0444);
1557 MODULE_PARM_DESC(qos_enable50, "enable all 50XX QoS functionality");
1558 module_param_named(11n_disable50, iwl50_mod_params.disable_11n, int, 0444);
1559 MODULE_PARM_DESC(11n_disable50, "disable 50XX 11n functionality");
1560 module_param_named(amsdu_size_8K50, iwl50_mod_params.amsdu_size_8K, int, 0444);
1561 MODULE_PARM_DESC(amsdu_size_8K50, "enable 8K amsdu size in 50XX series");
1562 module_param_named(fw_restart50, iwl50_mod_params.restart_fw, int, 0444);
1563 MODULE_PARM_DESC(fw_restart50, "restart firmware in case of error");