1 /******************************************************************************
3 * This file is provided under a dual BSD/GPLv2 license. When using or
4 * redistributing this file, you may do so under either license.
8 * Copyright(c) 2008 - 2013 Intel Corporation. All rights reserved.
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of version 2 of the GNU General Public License as
12 * published by the Free Software Foundation.
14 * This program is distributed in the hope that it will be useful, but
15 * WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
17 * General Public License for more details.
19 * You should have received a copy of the GNU General Public License
20 * along with this program; if not, write to the Free Software
21 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
24 * The full GNU General Public License is included in this distribution
25 * in the file called COPYING.
27 * Contact Information:
28 * Intel Linux Wireless <ilw@linux.intel.com>
29 * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
33 * Copyright(c) 2005 - 2013 Intel Corporation. All rights reserved.
34 * All rights reserved.
36 * Redistribution and use in source and binary forms, with or without
37 * modification, are permitted provided that the following conditions
40 * * Redistributions of source code must retain the above copyright
41 * notice, this list of conditions and the following disclaimer.
42 * * Redistributions in binary form must reproduce the above copyright
43 * notice, this list of conditions and the following disclaimer in
44 * the documentation and/or other materials provided with the
46 * * Neither the name Intel Corporation nor the names of its
47 * contributors may be used to endorse or promote products derived
48 * from this software without specific prior written permission.
50 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
51 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
52 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
53 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
54 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
55 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
56 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
57 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
58 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
59 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
60 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
61 *****************************************************************************/
65 #include <linux/types.h>
66 #include <net/mac80211.h>
69 * enum iwl_ucode_tlv_flag - ucode API flags
70 * @IWL_UCODE_TLV_FLAGS_PAN: This is PAN capable microcode; this previously
71 * was a separate TLV but moved here to save space.
72 * @IWL_UCODE_TLV_FLAGS_NEWSCAN: new uCode scan behaviour on hidden SSID,
73 * treats good CRC threshold as a boolean
74 * @IWL_UCODE_TLV_FLAGS_MFP: This uCode image supports MFP (802.11w).
75 * @IWL_UCODE_TLV_FLAGS_P2P: This uCode image supports P2P.
76 * @IWL_UCODE_TLV_FLAGS_DW_BC_TABLE: The SCD byte count table is in DWORDS
77 * @IWL_UCODE_TLV_FLAGS_UAPSD: This uCode image supports uAPSD
78 * @IWL_UCODE_TLV_FLAGS_SHORT_BL: 16 entries of black list instead of 64 in scan
79 * offload profile config command.
80 * @IWL_UCODE_TLV_FLAGS_RX_ENERGY_API: supports rx signal strength api
81 * @IWL_UCODE_TLV_FLAGS_TIME_EVENT_API_V2: using the new time event API.
82 * @IWL_UCODE_TLV_FLAGS_D3_6_IPV6_ADDRS: D3 image supports up to six
83 * (rather than two) IPv6 addresses
84 * @IWL_UCODE_TLV_FLAGS_BF_UPDATED: new beacon filtering API
85 * @IWL_UCODE_TLV_FLAGS_NO_BASIC_SSID: not sending a probe with the SSID element
86 * from the probe request template.
87 * @IWL_UCODE_TLV_FLAGS_D3_CONTINUITY_API: modified D3 API to allow keeping
88 * connection when going back to D0
89 * @IWL_UCODE_TLV_FLAGS_NEW_NSOFFL_SMALL: new NS offload (small version)
90 * @IWL_UCODE_TLV_FLAGS_NEW_NSOFFL_LARGE: new NS offload (large version)
91 * @IWL_UCODE_TLV_FLAGS_SCHED_SCAN: this uCode image supports scheduled scan.
92 * @IWL_UCODE_TLV_FLAGS_STA_KEY_CMD: new ADD_STA and ADD_STA_KEY command API
93 * @IWL_UCODE_TLV_FLAGS_DEVICE_PS_CMD: support device wide power command
94 * containing CAM (Continuous Active Mode) indication.
96 enum iwl_ucode_tlv_flag {
97 IWL_UCODE_TLV_FLAGS_PAN = BIT(0),
98 IWL_UCODE_TLV_FLAGS_NEWSCAN = BIT(1),
99 IWL_UCODE_TLV_FLAGS_MFP = BIT(2),
100 IWL_UCODE_TLV_FLAGS_P2P = BIT(3),
101 IWL_UCODE_TLV_FLAGS_DW_BC_TABLE = BIT(4),
102 IWL_UCODE_TLV_FLAGS_NEWBT_COEX = BIT(5),
103 IWL_UCODE_TLV_FLAGS_UAPSD = BIT(6),
104 IWL_UCODE_TLV_FLAGS_SHORT_BL = BIT(7),
105 IWL_UCODE_TLV_FLAGS_RX_ENERGY_API = BIT(8),
106 IWL_UCODE_TLV_FLAGS_TIME_EVENT_API_V2 = BIT(9),
107 IWL_UCODE_TLV_FLAGS_D3_6_IPV6_ADDRS = BIT(10),
108 IWL_UCODE_TLV_FLAGS_BF_UPDATED = BIT(11),
109 IWL_UCODE_TLV_FLAGS_NO_BASIC_SSID = BIT(12),
110 IWL_UCODE_TLV_FLAGS_D3_CONTINUITY_API = BIT(14),
111 IWL_UCODE_TLV_FLAGS_NEW_NSOFFL_SMALL = BIT(15),
112 IWL_UCODE_TLV_FLAGS_NEW_NSOFFL_LARGE = BIT(16),
113 IWL_UCODE_TLV_FLAGS_SCHED_SCAN = BIT(17),
114 IWL_UCODE_TLV_FLAGS_STA_KEY_CMD = BIT(19),
115 IWL_UCODE_TLV_FLAGS_DEVICE_PS_CMD = BIT(20),
118 /* The default calibrate table size if not specified by firmware file */
119 #define IWL_DEFAULT_STANDARD_PHY_CALIBRATE_TBL_SIZE 18
120 #define IWL_MAX_STANDARD_PHY_CALIBRATE_TBL_SIZE 19
121 #define IWL_MAX_PHY_CALIBRATE_TBL_SIZE 253
123 /* The default max probe length if not specified by the firmware file */
124 #define IWL_DEFAULT_MAX_PROBE_LENGTH 200
127 * enum iwl_ucode_type
131 * @IWL_UCODE_REGULAR: Normal runtime ucode
132 * @IWL_UCODE_INIT: Initial ucode
133 * @IWL_UCODE_WOWLAN: Wake on Wireless enabled ucode
135 enum iwl_ucode_type {
143 * enumeration of ucode section.
144 * This enumeration is used directly for older firmware (before 16.0).
145 * For new firmware, there can be up to 4 sections (see below) but the
146 * first one packaged into the firmware file is the DATA section and
147 * some debugging code accesses that.
150 IWL_UCODE_SECTION_DATA,
151 IWL_UCODE_SECTION_INST,
154 * For 16.0 uCode and above, there is no differentiation between sections,
155 * just an offset to the HW address.
157 #define IWL_UCODE_SECTION_MAX 6
158 #define IWL_UCODE_FIRST_SECTION_OF_SECOND_CPU (IWL_UCODE_SECTION_MAX/2)
160 struct iwl_ucode_capabilities {
161 u32 max_probe_length;
162 u32 standard_phy_calibration_size;
166 /* one for each uCode image (inst/data, init/runtime/wowlan) */
168 const void *data; /* vmalloc'ed data */
169 u32 len; /* size in bytes */
170 u32 offset; /* offset in the device */
174 struct fw_desc sec[IWL_UCODE_SECTION_MAX];
179 /* uCode version contains 4 values: Major/Minor/API/Serial */
180 #define IWL_UCODE_MAJOR(ver) (((ver) & 0xFF000000) >> 24)
181 #define IWL_UCODE_MINOR(ver) (((ver) & 0x00FF0000) >> 16)
182 #define IWL_UCODE_API(ver) (((ver) & 0x0000FF00) >> 8)
183 #define IWL_UCODE_SERIAL(ver) ((ver) & 0x000000FF)
186 * Calibration control struct.
187 * Sent as part of the phy configuration command.
188 * @flow_trigger: bitmap for which calibrations to perform according to
190 * @event_trigger: bitmap for which calibrations to perform according to
193 struct iwl_tlv_calib_ctrl {
195 __le32 event_trigger;
198 enum iwl_fw_phy_cfg {
199 FW_PHY_CFG_RADIO_TYPE_POS = 0,
200 FW_PHY_CFG_RADIO_TYPE = 0x3 << FW_PHY_CFG_RADIO_TYPE_POS,
201 FW_PHY_CFG_RADIO_STEP_POS = 2,
202 FW_PHY_CFG_RADIO_STEP = 0x3 << FW_PHY_CFG_RADIO_STEP_POS,
203 FW_PHY_CFG_RADIO_DASH_POS = 4,
204 FW_PHY_CFG_RADIO_DASH = 0x3 << FW_PHY_CFG_RADIO_DASH_POS,
205 FW_PHY_CFG_TX_CHAIN_POS = 16,
206 FW_PHY_CFG_TX_CHAIN = 0xf << FW_PHY_CFG_TX_CHAIN_POS,
207 FW_PHY_CFG_RX_CHAIN_POS = 20,
208 FW_PHY_CFG_RX_CHAIN = 0xf << FW_PHY_CFG_RX_CHAIN_POS,
212 * struct iwl_fw - variables associated with the firmware
214 * @ucode_ver: ucode version from the ucode file
215 * @fw_version: firmware version string
216 * @img: ucode image like ucode_rt, ucode_init, ucode_wowlan.
217 * @ucode_capa: capabilities parsed from the ucode file.
218 * @enhance_sensitivity_table: device can do enhanced sensitivity.
219 * @init_evtlog_ptr: event log offset for init ucode.
220 * @init_evtlog_size: event log size for init ucode.
221 * @init_errlog_ptr: error log offfset for init ucode.
222 * @inst_evtlog_ptr: event log offset for runtime ucode.
223 * @inst_evtlog_size: event log size for runtime ucode.
224 * @inst_errlog_ptr: error log offfset for runtime ucode.
225 * @mvm_fw: indicates this is MVM firmware
230 char fw_version[ETHTOOL_FWVERS_LEN];
233 struct fw_img img[IWL_UCODE_TYPE_MAX];
235 struct iwl_ucode_capabilities ucode_capa;
236 bool enhance_sensitivity_table;
238 u32 init_evtlog_ptr, init_evtlog_size, init_errlog_ptr;
239 u32 inst_evtlog_ptr, inst_evtlog_size, inst_errlog_ptr;
241 struct iwl_tlv_calib_ctrl default_calib[IWL_UCODE_TYPE_MAX];
247 static inline u8 iwl_fw_valid_tx_ant(const struct iwl_fw *fw)
249 return (fw->phy_config & FW_PHY_CFG_TX_CHAIN) >>
250 FW_PHY_CFG_TX_CHAIN_POS;
253 static inline u8 iwl_fw_valid_rx_ant(const struct iwl_fw *fw)
255 return (fw->phy_config & FW_PHY_CFG_RX_CHAIN) >>
256 FW_PHY_CFG_RX_CHAIN_POS;
259 #endif /* __iwl_fw_h__ */