2 * Support for common PCI multi-I/O cards (which is most of them)
4 * Copyright (C) 2001 Tim Waugh <twaugh@redhat.com>
6 * This program is free software; you can redistribute it and/or
7 * modify it under the terms of the GNU General Public License
8 * as published by the Free Software Foundation; either version
9 * 2 of the License, or (at your option) any later version.
12 * Multi-function PCI cards are supposed to present separate logical
13 * devices on the bus. A common thing to do seems to be to just use
14 * one logical device with lots of base address registers for both
15 * parallel ports and serial ports. This driver is for dealing with
20 #include <linux/types.h>
21 #include <linux/module.h>
22 #include <linux/init.h>
23 #include <linux/slab.h>
24 #include <linux/pci.h>
25 #include <linux/interrupt.h>
26 #include <linux/parport.h>
27 #include <linux/parport_pc.h>
28 #include <linux/8250_pci.h>
30 enum parport_pc_pci_cards {
68 /* each element directly indexed from enum list, above */
69 struct parport_pc_pci {
71 struct { /* BAR (base address registers) numbers in the config
74 int hi; /* -1 if not there, >6 for offset-method (max
78 /* If set, this is called immediately after pci_enable_device.
79 * If it returns non-zero, no probing will take place and the
80 * ports will not be used. */
81 int (*preinit_hook) (struct pci_dev *pdev, struct parport_pc_pci *card,
82 int autoirq, int autodma);
84 /* If set, this is called after probing for ports. If 'failed'
85 * is non-zero we couldn't use any of the ports. */
86 void (*postinit_hook) (struct pci_dev *pdev,
87 struct parport_pc_pci *card, int failed);
90 static int netmos_parallel_init(struct pci_dev *dev, struct parport_pc_pci *par,
91 int autoirq, int autodma)
93 /* the rule described below doesn't hold for this device */
94 if (dev->device == PCI_DEVICE_ID_NETMOS_9835 &&
95 dev->subsystem_vendor == PCI_VENDOR_ID_IBM &&
96 dev->subsystem_device == 0x0299)
99 if (dev->device == PCI_DEVICE_ID_NETMOS_9912) {
103 * Netmos uses the subdevice ID to indicate the number of parallel
104 * and serial ports. The form is 0x00PS, where <P> is the number of
105 * parallel ports and <S> is the number of serial ports.
107 par->numports = (dev->subsystem_device & 0xf0) >> 4;
108 if (par->numports > ARRAY_SIZE(par->addr))
109 par->numports = ARRAY_SIZE(par->addr);
115 static struct parport_pc_pci cards[] = {
116 /* titan_110l */ { 1, { { 3, -1 }, } },
117 /* titan_210l */ { 1, { { 3, -1 }, } },
118 /* netmos_9xx5_combo */ { 1, { { 2, -1 }, }, netmos_parallel_init },
119 /* netmos_9855 */ { 1, { { 0, -1 }, }, netmos_parallel_init },
120 /* netmos_9855_2p */ { 2, { { 0, -1 }, { 2, -1 }, } },
121 /* netmos_9900 */ {1, { { 3, 4 }, }, netmos_parallel_init },
122 /* netmos_9900_2p */ {2, { { 0, 1 }, { 3, 4 }, } },
123 /* netmos_99xx_1p */ {1, { { 0, 1 }, } },
124 /* avlab_1s1p */ { 1, { { 1, 2}, } },
125 /* avlab_1s2p */ { 2, { { 1, 2}, { 3, 4 },} },
126 /* avlab_2s1p */ { 1, { { 2, 3}, } },
127 /* siig_1s1p_10x */ { 1, { { 3, 4 }, } },
128 /* siig_2s1p_10x */ { 1, { { 4, 5 }, } },
129 /* siig_2p1s_20x */ { 2, { { 1, 2 }, { 3, 4 }, } },
130 /* siig_1s1p_20x */ { 1, { { 1, 2 }, } },
131 /* siig_2s1p_20x */ { 1, { { 2, 3 }, } },
132 /* timedia_4078a */ { 1, { { 2, -1 }, } },
133 /* timedia_4079h */ { 1, { { 2, 3 }, } },
134 /* timedia_4085h */ { 2, { { 2, -1 }, { 4, -1 }, } },
135 /* timedia_4088a */ { 2, { { 2, 3 }, { 4, 5 }, } },
136 /* timedia_4089a */ { 2, { { 2, 3 }, { 4, 5 }, } },
137 /* timedia_4095a */ { 2, { { 2, 3 }, { 4, 5 }, } },
138 /* timedia_4096a */ { 2, { { 2, 3 }, { 4, 5 }, } },
139 /* timedia_4078u */ { 1, { { 2, -1 }, } },
140 /* timedia_4079a */ { 1, { { 2, 3 }, } },
141 /* timedia_4085u */ { 2, { { 2, -1 }, { 4, -1 }, } },
142 /* timedia_4079r */ { 1, { { 2, 3 }, } },
143 /* timedia_4079s */ { 1, { { 2, 3 }, } },
144 /* timedia_4079d */ { 1, { { 2, 3 }, } },
145 /* timedia_4079e */ { 1, { { 2, 3 }, } },
146 /* timedia_4079f */ { 1, { { 2, 3 }, } },
147 /* timedia_9079a */ { 1, { { 2, 3 }, } },
148 /* timedia_9079b */ { 1, { { 2, 3 }, } },
149 /* timedia_9079c */ { 1, { { 2, 3 }, } },
150 /* wch_ch353_2s1p*/ { 1, { { 2, -1}, } },
153 static struct pci_device_id parport_serial_pci_tbl[] = {
155 { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_110L,
156 PCI_ANY_ID, PCI_ANY_ID, 0, 0, titan_110l },
157 { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_210L,
158 PCI_ANY_ID, PCI_ANY_ID, 0, 0, titan_210l },
159 { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9735,
160 PCI_ANY_ID, PCI_ANY_ID, 0, 0, netmos_9xx5_combo },
161 { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9745,
162 PCI_ANY_ID, PCI_ANY_ID, 0, 0, netmos_9xx5_combo },
163 { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9835,
164 PCI_ANY_ID, PCI_ANY_ID, 0, 0, netmos_9xx5_combo },
165 { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9845,
166 PCI_ANY_ID, PCI_ANY_ID, 0, 0, netmos_9xx5_combo },
167 { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9855,
168 0x1000, 0x0020, 0, 0, netmos_9855_2p },
169 { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9855,
170 0x1000, 0x0022, 0, 0, netmos_9855_2p },
171 { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9855,
172 PCI_ANY_ID, PCI_ANY_ID, 0, 0, netmos_9855 },
173 { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9900,
174 0xA000, 0x3011, 0, 0, netmos_9900 },
175 { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9900,
176 0xA000, 0x3012, 0, 0, netmos_9900 },
177 { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9900,
178 0xA000, 0x3020, 0, 0, netmos_9900_2p },
179 { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9912,
180 0xA000, 0x2000, 0, 0, netmos_99xx_1p },
181 /* PCI_VENDOR_ID_AVLAB/Intek21 has another bunch of cards ...*/
182 { PCI_VENDOR_ID_AFAVLAB, 0x2110,
183 PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_1s1p },
184 { PCI_VENDOR_ID_AFAVLAB, 0x2111,
185 PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_1s1p },
186 { PCI_VENDOR_ID_AFAVLAB, 0x2112,
187 PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_1s1p },
188 { PCI_VENDOR_ID_AFAVLAB, 0x2140,
189 PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_1s2p },
190 { PCI_VENDOR_ID_AFAVLAB, 0x2141,
191 PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_1s2p },
192 { PCI_VENDOR_ID_AFAVLAB, 0x2142,
193 PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_1s2p },
194 { PCI_VENDOR_ID_AFAVLAB, 0x2160,
195 PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_2s1p },
196 { PCI_VENDOR_ID_AFAVLAB, 0x2161,
197 PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_2s1p },
198 { PCI_VENDOR_ID_AFAVLAB, 0x2162,
199 PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_2s1p },
200 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S1P_10x_550,
201 PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_1s1p_10x },
202 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S1P_10x_650,
203 PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_1s1p_10x },
204 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S1P_10x_850,
205 PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_1s1p_10x },
206 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S1P_10x_550,
207 PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2s1p_10x },
208 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S1P_10x_650,
209 PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2s1p_10x },
210 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S1P_10x_850,
211 PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2s1p_10x },
212 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2P1S_20x_550,
213 PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2p1s_20x },
214 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2P1S_20x_650,
215 PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2p1s_20x },
216 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2P1S_20x_850,
217 PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2p1s_20x },
218 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S1P_20x_550,
219 PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2s1p_20x },
220 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S1P_20x_650,
221 PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_1s1p_20x },
222 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S1P_20x_850,
223 PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_1s1p_20x },
224 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S1P_20x_550,
225 PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2s1p_20x },
226 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S1P_20x_650,
227 PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2s1p_20x },
228 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S1P_20x_850,
229 PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2s1p_20x },
230 /* PCI_VENDOR_ID_TIMEDIA/SUNIX has many differing cards ...*/
231 { 0x1409, 0x7168, 0x1409, 0x4078, 0, 0, timedia_4078a },
232 { 0x1409, 0x7168, 0x1409, 0x4079, 0, 0, timedia_4079h },
233 { 0x1409, 0x7168, 0x1409, 0x4085, 0, 0, timedia_4085h },
234 { 0x1409, 0x7168, 0x1409, 0x4088, 0, 0, timedia_4088a },
235 { 0x1409, 0x7168, 0x1409, 0x4089, 0, 0, timedia_4089a },
236 { 0x1409, 0x7168, 0x1409, 0x4095, 0, 0, timedia_4095a },
237 { 0x1409, 0x7168, 0x1409, 0x4096, 0, 0, timedia_4096a },
238 { 0x1409, 0x7168, 0x1409, 0x5078, 0, 0, timedia_4078u },
239 { 0x1409, 0x7168, 0x1409, 0x5079, 0, 0, timedia_4079a },
240 { 0x1409, 0x7168, 0x1409, 0x5085, 0, 0, timedia_4085u },
241 { 0x1409, 0x7168, 0x1409, 0x6079, 0, 0, timedia_4079r },
242 { 0x1409, 0x7168, 0x1409, 0x7079, 0, 0, timedia_4079s },
243 { 0x1409, 0x7168, 0x1409, 0x8079, 0, 0, timedia_4079d },
244 { 0x1409, 0x7168, 0x1409, 0x9079, 0, 0, timedia_4079e },
245 { 0x1409, 0x7168, 0x1409, 0xa079, 0, 0, timedia_4079f },
246 { 0x1409, 0x7168, 0x1409, 0xb079, 0, 0, timedia_9079a },
247 { 0x1409, 0x7168, 0x1409, 0xc079, 0, 0, timedia_9079b },
248 { 0x1409, 0x7168, 0x1409, 0xd079, 0, 0, timedia_9079c },
250 { 0x4348, 0x7053, 0x4348, 0x3253, 0, 0, wch_ch353_2s1p},
251 { 0, } /* terminate list */
253 MODULE_DEVICE_TABLE(pci,parport_serial_pci_tbl);
256 * This table describes the serial "geometry" of these boards. Any
257 * quirks for these can be found in drivers/serial/8250_pci.c
259 * Cards not tested are marked n/t
260 * If you have one of these cards and it works for you, please tell me..
262 static struct pciserial_board pci_parport_serial_boards[] = {
264 .flags = FL_BASE1 | FL_BASE_BARS,
270 .flags = FL_BASE1 | FL_BASE_BARS,
275 [netmos_9xx5_combo] = {
276 .flags = FL_BASE0 | FL_BASE_BARS,
282 .flags = FL_BASE2 | FL_BASE_BARS,
288 .flags = FL_BASE4 | FL_BASE_BARS,
293 [netmos_9900] = { /* n/t */
294 .flags = FL_BASE0 | FL_BASE_BARS,
299 [netmos_9900_2p] = { /* parallel only */ /* n/t */
305 [netmos_99xx_1p] = { /* parallel only */ /* n/t */
311 [avlab_1s1p] = { /* n/t */
312 .flags = FL_BASE0 | FL_BASE_BARS,
317 [avlab_1s2p] = { /* n/t */
318 .flags = FL_BASE0 | FL_BASE_BARS,
323 [avlab_2s1p] = { /* n/t */
324 .flags = FL_BASE0 | FL_BASE_BARS,
360 .flags = FL_BASE0|FL_BASE_BARS,
366 .flags = FL_BASE0|FL_BASE_BARS,
372 .flags = FL_BASE0|FL_BASE_BARS,
378 .flags = FL_BASE0|FL_BASE_BARS,
384 .flags = FL_BASE0|FL_BASE_BARS,
390 .flags = FL_BASE0|FL_BASE_BARS,
396 .flags = FL_BASE0|FL_BASE_BARS,
402 .flags = FL_BASE0|FL_BASE_BARS,
408 .flags = FL_BASE0|FL_BASE_BARS,
414 .flags = FL_BASE0|FL_BASE_BARS,
420 .flags = FL_BASE0|FL_BASE_BARS,
426 .flags = FL_BASE0|FL_BASE_BARS,
432 .flags = FL_BASE0|FL_BASE_BARS,
438 .flags = FL_BASE0|FL_BASE_BARS,
444 .flags = FL_BASE0|FL_BASE_BARS,
450 .flags = FL_BASE0|FL_BASE_BARS,
456 .flags = FL_BASE0|FL_BASE_BARS,
462 .flags = FL_BASE0|FL_BASE_BARS,
468 .flags = FL_BASE0|FL_BASE_BARS,
475 struct parport_serial_private {
476 struct serial_private *serial;
478 struct parport *port[PARPORT_MAX];
479 struct parport_pc_pci par;
482 /* Register the serial port(s) of a PCI card. */
483 static int serial_register(struct pci_dev *dev, const struct pci_device_id *id)
485 struct parport_serial_private *priv = pci_get_drvdata (dev);
486 struct pciserial_board *board;
487 struct serial_private *serial;
489 board = &pci_parport_serial_boards[id->driver_data];
491 if (board->num_ports == 0)
494 serial = pciserial_init_ports(dev, board);
497 return PTR_ERR(serial);
499 priv->serial = serial;
503 /* Register the parallel port(s) of a PCI card. */
504 static int parport_register(struct pci_dev *dev, const struct pci_device_id *id)
506 struct parport_pc_pci *card;
507 struct parport_serial_private *priv = pci_get_drvdata (dev);
510 priv->par = cards[id->driver_data];
512 if (card->preinit_hook &&
513 card->preinit_hook (dev, card, PARPORT_IRQ_NONE, PARPORT_DMA_NONE))
516 for (n = 0; n < card->numports; n++) {
517 struct parport *port;
518 int lo = card->addr[n].lo;
519 int hi = card->addr[n].hi;
520 unsigned long io_lo, io_hi;
523 if (priv->num_par == ARRAY_SIZE (priv->port)) {
525 "parport_serial: %s: only %zu parallel ports "
526 "supported (%d reported)\n", pci_name (dev),
527 ARRAY_SIZE(priv->port), card->numports);
531 io_lo = pci_resource_start (dev, lo);
533 if ((hi >= 0) && (hi <= 6))
534 io_hi = pci_resource_start (dev, hi);
536 io_lo += hi; /* Reinterpret the meaning of
537 "hi" as an offset (see SYBA
539 /* TODO: test if sharing interrupts works */
541 if (irq == IRQ_NONE) {
543 "PCI parallel port detected: I/O at %#lx(%#lx)\n",
545 irq = PARPORT_IRQ_NONE;
548 "PCI parallel port detected: I/O at %#lx(%#lx), IRQ %d\n",
551 port = parport_pc_probe_port (io_lo, io_hi, irq,
552 PARPORT_DMA_NONE, &dev->dev, IRQF_SHARED);
554 priv->port[priv->num_par++] = port;
559 if (card->postinit_hook)
560 card->postinit_hook (dev, card, !success);
565 static int parport_serial_pci_probe(struct pci_dev *dev,
566 const struct pci_device_id *id)
568 struct parport_serial_private *priv;
571 priv = kzalloc (sizeof *priv, GFP_KERNEL);
574 pci_set_drvdata (dev, priv);
576 err = pci_enable_device (dev);
578 pci_set_drvdata (dev, NULL);
583 if (parport_register (dev, id)) {
584 pci_set_drvdata (dev, NULL);
589 if (serial_register (dev, id)) {
591 for (i = 0; i < priv->num_par; i++)
592 parport_pc_unregister_port (priv->port[i]);
593 pci_set_drvdata (dev, NULL);
601 static void parport_serial_pci_remove(struct pci_dev *dev)
603 struct parport_serial_private *priv = pci_get_drvdata (dev);
606 pci_set_drvdata(dev, NULL);
610 pciserial_remove_ports(priv->serial);
613 for (i = 0; i < priv->num_par; i++)
614 parport_pc_unregister_port (priv->port[i]);
621 static int parport_serial_pci_suspend(struct pci_dev *dev, pm_message_t state)
623 struct parport_serial_private *priv = pci_get_drvdata(dev);
626 pciserial_suspend_ports(priv->serial);
628 /* FIXME: What about parport? */
631 pci_set_power_state(dev, pci_choose_state(dev, state));
635 static int parport_serial_pci_resume(struct pci_dev *dev)
637 struct parport_serial_private *priv = pci_get_drvdata(dev);
640 pci_set_power_state(dev, PCI_D0);
641 pci_restore_state(dev);
644 * The device may have been disabled. Re-enable it.
646 err = pci_enable_device(dev);
648 printk(KERN_ERR "parport_serial: %s: error enabling "
649 "device for resume (%d)\n", pci_name(dev), err);
654 pciserial_resume_ports(priv->serial);
656 /* FIXME: What about parport? */
662 static struct pci_driver parport_serial_pci_driver = {
663 .name = "parport_serial",
664 .id_table = parport_serial_pci_tbl,
665 .probe = parport_serial_pci_probe,
666 .remove = parport_serial_pci_remove,
668 .suspend = parport_serial_pci_suspend,
669 .resume = parport_serial_pci_resume,
674 static int __init parport_serial_init (void)
676 return pci_register_driver (&parport_serial_pci_driver);
679 static void __exit parport_serial_exit (void)
681 pci_unregister_driver (&parport_serial_pci_driver);
685 MODULE_AUTHOR("Tim Waugh <twaugh@redhat.com>");
686 MODULE_DESCRIPTION("Driver for common parallel+serial multi-I/O PCI cards");
687 MODULE_LICENSE("GPL");
689 module_init(parport_serial_init);
690 module_exit(parport_serial_exit);